--- qtparted-0.4.5.orig/config.guess +++ qtparted-0.4.5/config.guess @@ -3,7 +3,7 @@ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. -timestamp='2005-05-15' +timestamp='2005-08-03' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -125,7 +125,7 @@ ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ;' +esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) @@ -139,11 +139,6 @@ UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. -if ls /lib/ld-uClibc*.so &>/dev/null; then - LINSUFFIX="-uclibc" -else - LINSUFFIX="-gnu" -fi case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) @@ -204,44 +199,9 @@ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; - amd64:OpenBSD:*:*) - echo x86_64-unknown-openbsd${UNAME_RELEASE} - exit ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit ;; - cats:OpenBSD:*:*) - echo arm-unknown-openbsd${UNAME_RELEASE} - exit ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit ;; - luna88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit ;; - macppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit ;; - mvmeppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit ;; - sgi:OpenBSD:*:*) - echo mips64-unknown-openbsd${UNAME_RELEASE} - exit ;; - sun3:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit ;; *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} @@ -663,8 +623,7 @@ esac if [ ${HP_ARCH} = "hppa2.0w" ] then - # avoid double evaluation of $set_cc_for_build - test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler @@ -810,9 +769,13 @@ i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; - i*:MINGW*:* | i*:windows32*:*) + i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; @@ -831,7 +794,7 @@ i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; - amd64:CYGWIN*:*:*) + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) @@ -852,25 +815,25 @@ echo ${UNAME_MACHINE}-pc-minix exit ;; arm*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux$LINSUFFIX + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) - echo cris-axis-linux$LINSUFFIX + echo cris-axis-linux-gnu exit ;; crisv32:Linux:*:*) - echo crisv32-axis-linux$LINSUFFIX + echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) - echo frv-unknown-linux$LINSUFFIX + echo frv-unknown-linux-gnu exit ;; ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux$LINSUFFIX + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux$LINSUFFIX + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux$LINSUFFIX + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; mips:Linux:*:*) eval $set_cc_for_build @@ -889,7 +852,7 @@ #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux$LINSUFFIX"; exit; } + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; mips64:Linux:*:*) eval $set_cc_for_build @@ -908,13 +871,16 @@ #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux$LINSUFFIX"; exit; } + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; ppc:Linux:*:*) - echo powerpc-unknown-linux$LINSUFFIX + echo powerpc-unknown-linux-gnu exit ;; ppc64:Linux:*:*) - echo powerpc64-unknown-linux$LINSUFFIX + echo powerpc64-unknown-linux-gnu exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in @@ -927,34 +893,34 @@ EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LINSUFFIX="-gnulibc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux$LINSUFFIX + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux$LINSUFFIX ;; - PA8*) echo hppa2.0-unknown-linux$LINSUFFIX ;; - *) echo hppa-unknown-linux$LINSUFFIX ;; + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; esac exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux$LINSUFFIX + echo hppa64-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux$LINSUFFIX + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux$LINSUFFIX + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux$LINSUFFIX + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; x86_64:Linux:*:*) - echo x86_64-unknown-linux$LINSUFFIX + echo x86_64-unknown-linux-gnu exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so @@ -969,7 +935,7 @@ p'` case "$ld_supported_targets" in elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux$LINSUFFIX" + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" @@ -1009,7 +975,6 @@ #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - if test "$LINSUFFIX" = "-uclibc"; then LIBC=uclibc; fi test x"${LIBC}" != x && { echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit --- qtparted-0.4.5.orig/ltmain.sh +++ qtparted-0.4.5/ltmain.sh @@ -33,9 +33,6 @@ # function. progpath="$0" -# define SED for compatibility with historic ltconfigs generated by libtool 1.3 -[ -z "$SED" ] && SED=sed - # The name of this program: progname=`echo "$progpath" | $SED $basename` modename="$progname" @@ -46,8 +43,8 @@ PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=1.5.18 -TIMESTAMP=" (1.1220.2.245 2005/05/16 08:55:27)" +VERSION="1.5.20 Debian 1.5.20-2" +TIMESTAMP=" (1.1220.2.287 2005/08/31 18:54:15)" # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. @@ -88,17 +85,18 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed="sed"' -e 1s/^X//' +Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' # test EBCDIC or ASCII -case `echo A|tr A '\301'` in - A) # EBCDIC based system - SP2NL="tr '\100' '\n'" - NL2SP="tr '\r\n' '\100\100'" +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + SP2NL='tr \040 \012' + NL2SP='tr \015\012 \040\040' ;; - *) # Assume ASCII based system - SP2NL="tr '\040' '\012'" - NL2SP="tr '\015\012' '\040\040'" + *) # EBCDIC based system + SP2NL='tr \100 \n' + NL2SP='tr \r\n \100\100' ;; esac @@ -136,7 +134,6 @@ execute_dlfiles= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" -quote_scanset='[[~#^*{};<>?'"'"' ]' ##################################### # Shell function definitions: @@ -195,7 +192,7 @@ CC_quoted= for arg in $CC; do case $arg in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -211,12 +208,12 @@ for z in $available_tags; do if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. - eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. case $arg in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -340,7 +337,7 @@ func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches fi # $run - ;; + ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; @@ -393,7 +390,7 @@ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then taglist="$taglist $tagname" # Evaluate the configuration. - eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" else $echo "$progname: ignoring unknown tag $tagname" 1>&2 fi @@ -426,10 +423,10 @@ ;; --config) - sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath # Now print the configurations for the tags. for tagname in $taglist; do - sed -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" done exit $? ;; @@ -579,7 +576,7 @@ for arg do - case "$arg_mode" in + case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" @@ -630,7 +627,7 @@ # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. case $arg in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -665,7 +662,7 @@ # in scan sets (worked around with variable expansion), # and furthermore cannot handle '|' '&' '(' ')' in scan sets # at all, so we specify them separately. - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac @@ -740,13 +737,12 @@ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` case $qlibobj in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qlibobj="\"$qlibobj\"" ;; esac - if test "X$libobj" != "X$qlibobj"; then - $echo "$modename: libobj name \`$libobj' may not contain shell special characters." - exit $EXIT_FAILURE - fi + test "X$libobj" != "X$qlibobj" \ + && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then @@ -827,7 +823,7 @@ fi qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` case $qsrcfile in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qsrcfile="\"$qsrcfile\"" ;; esac @@ -1114,7 +1110,7 @@ arg="$1" shift case $arg in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test ;; *) qarg=$arg ;; @@ -1211,7 +1207,7 @@ # A libtool-controlled object. # Check to see that this really is a libtool object. - if (sed -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= @@ -1423,7 +1419,7 @@ continue ;; - -framework) + -framework|-arch) prev=darwin_framework compiler_flags="$compiler_flags $arg" compile_command="$compile_command $arg" @@ -1546,7 +1542,7 @@ # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -1662,7 +1658,7 @@ for flag in $args; do IFS="$save_ifs" case $flag in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac @@ -1680,7 +1676,7 @@ for flag in $args; do IFS="$save_ifs" case $flag in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac @@ -1713,7 +1709,7 @@ # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -1728,7 +1724,7 @@ # A libtool-controlled object. # Check to see that this really is a libtool object. - if (sed -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= @@ -1847,7 +1843,7 @@ # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -1997,7 +1993,10 @@ case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; esac fi if test "$pass" = dlopen; then @@ -2054,7 +2053,7 @@ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) - if (sed -e '2q' $lib | + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then library_names= old_library= @@ -2203,7 +2202,7 @@ fi # Check to see that this really is a libtool archive. - if (sed -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE @@ -2412,7 +2411,7 @@ case "$temp_rpath " in *" $dir "*) ;; *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; + *) temp_rpath="$temp_rpath $absdir" ;; esac fi @@ -2517,8 +2516,8 @@ # Make a new name for the extract_expsyms_cmds to use soroot="$soname" - soname=`$echo $soroot | sed -e 's/^.*\///'` - newlib="libimp-`$echo $soname | sed 's/^lib//;s/\.dll$//'`.a" + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : @@ -2598,7 +2597,7 @@ add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then - case "$libdir" in + case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; @@ -2671,7 +2670,7 @@ add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then - case "$libdir" in + case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; @@ -2732,8 +2731,6 @@ fi fi else - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" deplibs="$dir/$old_library $deplibs" link_static=yes fi @@ -2796,7 +2793,7 @@ if grep "^installed=no" $deplib > /dev/null; then path="$absdir/$objdir" else - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE @@ -2811,7 +2808,7 @@ *-*-darwin*) # we do not want to link against static libs, # but need to link against shared - eval deplibrary_names=`sed -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp @@ -3110,6 +3107,11 @@ age="$number_minor" revision="$number_minor" ;; + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE + ;; esac ;; no) @@ -3320,9 +3322,9 @@ # Eliminate all temporary directories. for path in $notinst_path; do - lib_search_path=`$echo "$lib_search_path " | sed -e 's% $path % %g'` - deplibs=`$echo "$deplibs " | sed -e 's% -L$path % %g'` - dependency_libs=`$echo "$dependency_libs " | sed -e 's% -L$path % %g'` + lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` + deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` + dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` done if test -n "$xrpath"; then @@ -3423,7 +3425,7 @@ if test "$?" -eq 0 ; then ldd_output=`ldd conftest` for i in $deplibs; do - name="`expr $i : '-l\(.*\)'`" + name=`expr $i : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" -ne "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then @@ -3460,7 +3462,7 @@ # Error occurred in the first compile. Let's try to salvage # the situation: Compile a separate program for each library. for i in $deplibs; do - name="`expr $i : '-l\(.*\)'`" + name=`expr $i : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" != "0"; then $rm conftest @@ -3512,7 +3514,7 @@ set dummy $deplibs_check_method file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" + name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then @@ -3540,14 +3542,14 @@ # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | sed 's/.* -> //'` + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | sed 10q \ + | ${SED} 10q \ | $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" @@ -3581,7 +3583,7 @@ set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" + name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then @@ -3599,7 +3601,7 @@ for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval $echo \"$potent_lib\" 2>/dev/null \ - | sed 10q \ + | ${SED} 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" @@ -3636,7 +3638,7 @@ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$echo "X $tmp_deplibs" | sed -e "1s,^X,," -e "s,$i,,"` + tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` done fi if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ @@ -3822,6 +3824,9 @@ # The command line is too long to execute in one step. $show "using reloadable object file for export list..." skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break fi done IFS="$save_ifs" @@ -3891,7 +3896,8 @@ fi fi - if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` && + if test "X$skipped_export" != "X:" && + len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else @@ -3926,7 +3932,7 @@ do eval test_cmds=\"$reload_cmds $objlist $last_robj\" if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*"` && + { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len"; }; then objlist="$objlist $obj" else @@ -4016,13 +4022,30 @@ IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" - $run eval "$cmd" || exit $? + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + fi + fi + exit $EXIT_SUCCESS fi @@ -4169,7 +4192,7 @@ prog) case $host in - *cygwin*) output=`$echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; + *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 @@ -4367,9 +4390,9 @@ if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $run $rm $export_symbols - $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' else - $run eval "sed -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' fi @@ -4377,7 +4400,7 @@ for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" - name=`$echo "$arg" | sed -e 's%^.*/%%'` + name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` $run eval '$echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done @@ -4659,13 +4682,13 @@ # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in - *.exe) output=`$echo $output|sed 's,.exe$,,'` ;; + *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe - outputname=`$echo $outputname|sed 's,.exe$,,'` ;; + outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; *) exeext= ;; esac case $host in @@ -4769,6 +4792,7 @@ EOF cat >> $cwrappersource <<"EOF" + return 127; } void * @@ -4898,7 +4922,7 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' +Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout @@ -4936,7 +4960,7 @@ test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` @@ -4949,7 +4973,7 @@ fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done # Try to get the absolute directory name. @@ -4963,7 +4987,7 @@ progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" @@ -5032,13 +5056,13 @@ # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ - exec \$progdir\\\\\$program \${1+\"\$@\"} + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $echo >> $output "\ - exec \$progdir/\$program \${1+\"\$@\"} + exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac @@ -5048,7 +5072,7 @@ fi else # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 + \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 $echo \"See the $PACKAGE documentation for more information.\" 1>&2 exit $EXIT_FAILURE @@ -5171,7 +5195,7 @@ oldobjs="$objlist $obj" objlist="$objlist $obj" eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*"` && + if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len"; then : else @@ -5249,7 +5273,7 @@ case $deplib in *.la) name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE @@ -5263,7 +5287,7 @@ newdlfiles= for lib in $dlfiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE @@ -5274,7 +5298,7 @@ newdlprefiles= for lib in $dlprefiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE @@ -5368,11 +5392,11 @@ # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then + $echo "X$nonopt" | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case $arg in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -5381,14 +5405,14 @@ shift else install_prog= - arg="$nonopt" + arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -5406,28 +5430,31 @@ do if test -n "$dest"; then files="$files $dest" - dest="$arg" + dest=$arg continue fi case $arg in -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; - -*) ;; - + -*) + ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else - dest="$arg" + dest=$arg continue fi ;; @@ -5436,7 +5463,7 @@ # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -5520,7 +5547,7 @@ *.la) # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 @@ -5605,11 +5632,14 @@ if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. for linkname do if test "$linkname" != "$realname"; then - $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" fi done fi @@ -5622,7 +5652,16 @@ IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" - $run eval "$cmd" || exit $? + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } done IFS="$save_ifs" fi @@ -5697,7 +5736,7 @@ case $file in *.exe) if test ! -f "$file"; then - file=`$echo $file|sed 's,.exe$,,'` + file=`$echo $file|${SED} 's,.exe$,,'` stripped_ext=".exe" fi ;; @@ -5706,27 +5745,25 @@ # Do a test to see if this is really a libtool program. case $host in *cygwin*|*mingw*) - wrapper=`$echo $file | sed -e 's,.exe$,,'` + wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` ;; *) wrapper=$file ;; esac - if (sed -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then notinst_deplibs= relink_command= - # To insure that "foo" is sourced, and not "foo.exe", - # finese the cygwin/MSYS system by explicitly sourcing "foo." - # which disallows the automatic-append-.exe behavior. - case $build in - *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; - *) wrapperdot=${wrapper} ;; - esac + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # # If there is no directory component, then add one. - case $file in - */* | *\\*) . ${wrapperdot} ;; - *) . ./${wrapperdot} ;; + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; esac # Check the variables that should have been set. @@ -5754,17 +5791,15 @@ done relink_command= - # To insure that "foo" is sourced, and not "foo.exe", - # finese the cygwin/MSYS system by explicitly sourcing "foo." - # which disallows the automatic-append-.exe behavior. - case $build in - *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; - *) wrapperdot=${wrapper} ;; - esac + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # # If there is no directory component, then add one. - case $file in - */* | *\\*) . ${wrapperdot} ;; - *) . ./${wrapperdot} ;; + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; esac outputname= @@ -5772,13 +5807,7 @@ if test "$finalize" = yes && test -z "$run"; then tmpdir="/tmp" test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir_mktemp=`mktemp -d $tmpdir/libtoolXXXXXX` - if [ -z "$tmpdir_mktemp" ]; then - tmpdir="$tmpdir/libtool-$$" - else - tmpdir="$tmpdir_mktemp" - unset tmpdir_mktemp - fi + tmpdir="$tmpdir/libtool-$$" save_umask=`umask` umask 0077 if $mkdir "$tmpdir"; then @@ -5811,7 +5840,7 @@ fi # remove .exe since cygwin /usr/bin/install will append another - # one anyways + # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in @@ -5822,7 +5851,7 @@ destfile=$destfile.exe ;; *:*.exe) - destfile=`$echo $destfile | sed -e 's,.exe$,,'` + destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` ;; esac ;; @@ -5972,7 +6001,7 @@ case $file in *.la) # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 @@ -6043,7 +6072,7 @@ -*) ;; *) # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; @@ -6153,7 +6182,7 @@ case $name in *.la) # Possibly a libtool archive, so verify it. - if (sed -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. @@ -6202,7 +6231,7 @@ *.lo) # Possibly a libtool object, so verify it. - if (sed -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # Read the .lo file . $dir/$name @@ -6226,15 +6255,15 @@ noexename=$name case $file in *.exe) - file=`$echo $file|sed 's,.exe$,,'` - noexename=`$echo $name|sed 's,.exe$,,'` + file=`$echo $file|${SED} 's,.exe$,,'` + noexename=`$echo $name|${SED} 's,.exe$,,'` # $file with .exe has already been added to rmfiles, # add $file without .exe rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. - if (sed -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then relink_command= . $dir/$noexename --- qtparted-0.4.5.orig/acinclude.m4 +++ qtparted-0.4.5/acinclude.m4 @@ -5753,30 +5753,15 @@ ]) # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -## Copyright 1996, 1997, 1998, 1999, 2000, 2001 +## Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 ## Free Software Foundation, Inc. ## Originally by Gordon Matzigkeit , 1996 ## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## -## As a special exception to the GNU General Public License, if you -## distribute this file as part of a program that contains a -## configuration script generated by Autoconf, you may include it under -## the same distribution terms that you use for the rest of that program. +## This file is free software; the Free Software Foundation gives +## unlimited permission to copy and/or distribute it, with or without +## modifications, as long as this notice is preserved. -# serial 47 AC_PROG_LIBTOOL +# serial 47 Debian 1.5.20-2 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) @@ -5836,7 +5821,7 @@ LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' +LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Prevent multiple expansion @@ -5886,7 +5871,7 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' +Xsed='sed -e 1s/^X//' [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] # Same as above, but do not quote variable references. @@ -5906,7 +5891,7 @@ default_ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except M$VC, +# All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" @@ -5954,6 +5939,8 @@ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi +_LT_CC_BASENAME([$compiler]) + # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) @@ -5999,6 +5986,48 @@ ])# _LT_AC_SYS_COMPILER +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +AC_DEFUN([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +]) + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +AC_DEFUN([_LT_COMPILER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +AC_DEFUN([_LT_LINKER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_LINKER_BOILERPLATE + + # _LT_AC_SYS_LIBPATH_AIX # ---------------------- # Links a minimal program and checks the executable @@ -6071,15 +6100,15 @@ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break @@ -6248,14 +6277,13 @@ # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.o` in *32-bit*) - LINUX_64_MODE="32" case $host in x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; - ppc64-*linux*) + ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) @@ -6267,7 +6295,6 @@ esac ;; *64-bit*) - LINUX_64_MODE="64" case $host in x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" @@ -6332,7 +6359,7 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) @@ -6342,8 +6369,10 @@ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi @@ -6369,11 +6398,16 @@ LDFLAGS="$LDFLAGS $3" printf "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized + # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD + $echo "X$_lt_linker_boilerplate" | $Xsed > conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi else $2=yes fi @@ -6397,7 +6431,7 @@ AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 - testring="ABCD" + teststring="ABCD" case $build_os in msdosdjgpp*) @@ -6426,20 +6460,53 @@ lt_cv_sys_max_cmd_len=8192; ;; - *) + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + *) # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` - testring=$testring$testring + teststring=$teststring$teststring done - testring= + teststring= # Add a significant safety factor because C++ compilers can tack on massive # amounts of additional arguments before passing them to the linker. # It appears as though 1/2 is a usable value. @@ -6535,7 +6602,7 @@ }] EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; @@ -6589,7 +6656,7 @@ lt_cv_dlopen_self=yes ]) ;; - + *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], @@ -6678,20 +6745,13 @@ mkdir out printf "$lt_simple_compile_test_code" > conftest.$ac_ext - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) @@ -6703,13 +6763,18 @@ then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp + $SED '/^$/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi - chmod u+w . - $rm conftest* out/* - rmdir out + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* @@ -6768,8 +6833,8 @@ [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_AC_TAGVAR(hardcode_action, $1)= if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ - test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then + test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existant directories. if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && @@ -6826,7 +6891,7 @@ *) AC_MSG_RESULT([no]) ;; - esac + esac fi ])# AC_LIBTOOL_SYS_LIB_STRIP @@ -6839,7 +6904,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext=".so" +shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -6849,7 +6914,20 @@ version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi need_lib_prefix=unknown hardcode_into_libs=no @@ -6914,7 +6992,7 @@ amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) @@ -6923,7 +7001,7 @@ shlibpath_var=LIBRARY_PATH ;; -bsdi4*) +bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -6939,7 +7017,7 @@ cygwin* | mingw* | pw32*) version_type=windows - shrext=".dll" + shrext_cmds=".dll" need_version=no need_lib_prefix=no @@ -6951,7 +7029,8 @@ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -6981,7 +7060,7 @@ ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac ;; @@ -7004,7 +7083,7 @@ soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -7027,7 +7106,7 @@ dynamic_linker=no ;; -freebsd*-gnu*) +kfreebsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -7039,8 +7118,17 @@ dynamic_linker='GNU ld.so' ;; -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -7058,7 +7146,7 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - freebsd3.[01]* | freebsdelf3.[01]*) + freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; @@ -7085,9 +7173,9 @@ version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) - shrext='.so' + shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH @@ -7102,7 +7190,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) - shrext='.sl' + shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH @@ -7113,7 +7201,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) - shrext='.sl' + shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH @@ -7175,22 +7263,19 @@ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, @@ -7200,6 +7285,30 @@ dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + netbsd*) version_type=sunos need_lib_prefix=no @@ -7209,7 +7318,7 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi @@ -7238,7 +7347,11 @@ openbsd*) version_type=sunos need_lib_prefix=no - need_version=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH @@ -7258,7 +7371,7 @@ os2*) libname_spec='$name' - shrext=".dll" + shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' @@ -7404,7 +7517,9 @@ case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -7466,7 +7581,7 @@ # AC_LIBTOOL_WIN32_DLL # -------------------- -# declare package support for building win32 dll's +# declare package support for building win32 DLLs AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_WIN32_DLL @@ -7640,7 +7755,7 @@ if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then @@ -7750,7 +7865,7 @@ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. + # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; @@ -7895,7 +8011,7 @@ hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file - case "$host_cpu" in + case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so @@ -7912,42 +8028,21 @@ ;; irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux*) - case $host_cpu in - alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* ) - lt_cv_deplibs_check_method=pass_all ;; - # the debian people say, arm and glibc 2.3.1 works for them with pass_all - arm* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + lt_cv_deplibs_check_method=pass_all ;; -netbsd*) +netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else @@ -7966,19 +8061,14 @@ ;; openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; @@ -7988,7 +8078,6 @@ solaris*) lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) @@ -8096,13 +8185,13 @@ # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl convenience library and # LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. +# --enable-ltdl-convenience to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# it is assumed to be `libltdl'. LIBLTDL will be prefixed with +# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' +# (note the single quotes!). If your package is not flat and you're not +# using automake, define top_builddir and top_srcdir appropriately in +# the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in @@ -8121,13 +8210,13 @@ # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl installable library and # LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided and an installed libltdl is not found, it is -# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' -# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single -# quotes!). If your package is not flat and you're not using automake, -# define top_builddir and top_srcdir appropriately in the Makefiles. +# --enable-ltdl-install to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# and an installed libltdl is not found, it is assumed to be `libltdl'. +# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and top_srcdir +# appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl @@ -8165,10 +8254,21 @@ # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -8241,6 +8341,10 @@ _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # # Check for any special shared library compilation flags. # @@ -8254,7 +8358,7 @@ fi if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : + if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : else AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no @@ -8295,7 +8399,7 @@ # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -8304,48 +8408,11 @@ fi ;; -aix4*) +aix4* | aix5*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi - ;; - darwin* | rhapsody*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; - esac - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; + ;; esac AC_MSG_RESULT([$enable_shared]) @@ -8370,7 +8437,7 @@ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -8399,7 +8466,7 @@ _LT_AC_TAGVAR(compiler_lib_search_path, $1)= # Source file extension for C++ test sources. -ac_ext=cc +ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o @@ -8414,6 +8481,10 @@ # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD @@ -8435,7 +8506,7 @@ CC=${CXX-"c++"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +_LT_CC_BASENAME([$compiler]) # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately @@ -8453,8 +8524,8 @@ # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' @@ -8480,7 +8551,7 @@ # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists @@ -8510,8 +8581,22 @@ exp_sym_flag='-Bexport' no_entry_flag="" else - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + esac + exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi @@ -8528,7 +8613,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) + case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -8549,6 +8634,9 @@ fi esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -8557,15 +8645,16 @@ shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' + shared_flag='${wl}-G' else - shared_flag='-qmkshrobj' + shared_flag='${wl}-bM:SRE' fi fi fi - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. @@ -8574,13 +8663,12 @@ _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX @@ -8594,8 +8682,8 @@ # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -8608,16 +8696,17 @@ esac ;; + cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -8626,70 +8715,81 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - darwin* | rhapsody*) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac fi - ;; - esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; + ;; dgux*) case $cc_basename in - ec++) + ec++*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - ghcx) + ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -8700,14 +8800,14 @@ ;; esac ;; - freebsd[12]*) + freebsd[[12]]*) # C++ shared libraries reported to be fairly broken before switch to ELF _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; - freebsd*) + freebsd* | kfreebsd*-gnu | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_AC_TAGVAR(ld_shlibs, $1)=yes @@ -8724,12 +8824,12 @@ # location of the library. case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - aCC) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + aCC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -8738,11 +8838,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -8752,7 +8852,7 @@ ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' @@ -8768,7 +8868,7 @@ ;; esac fi - case "$host_cpu" in + case $host_cpu in hppa*64*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -8789,17 +8889,17 @@ esac case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - aCC) - case "$host_cpu" in + aCC*) + case $host_cpu in hppa*64*|ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists @@ -8815,12 +8915,12 @@ *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then - case "$host_cpu" in + case $host_cpu in ia64*|hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -8833,9 +8933,9 @@ ;; irix5* | irix6*) case $cc_basename in - CC) + CC*) # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -8846,9 +8946,9 @@ *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi fi _LT_AC_TAGVAR(link_all_deplibs, $1)=yes @@ -8859,14 +8959,14 @@ ;; linux*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -8884,20 +8984,44 @@ # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - icpc) + icpc*) # Intel C++ with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; - cxx) + pgCC*) + # Portland Group C++ compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -8925,7 +9049,7 @@ ;; mvs*) case $cc_basename in - cxx) + cxx*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; @@ -8935,7 +9059,7 @@ ;; esac ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= @@ -8946,15 +9070,31 @@ # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; + openbsd2*) + # C++ shared libraries are fairly broken + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; osf3*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -8964,14 +9104,14 @@ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - RCC) + RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - cxx) + cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -8989,7 +9129,7 @@ *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -9008,13 +9148,13 @@ ;; osf4* | osf5*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -9023,17 +9163,17 @@ # the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - RCC) + RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - cxx) + cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ $rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -9052,7 +9192,7 @@ *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -9076,7 +9216,7 @@ sco*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; @@ -9088,12 +9228,12 @@ ;; sunos4*) case $cc_basename in - CC) + CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - lcc) + lcc*) # Lucid # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -9106,36 +9246,33 @@ ;; solaris*) case $cc_basename in - CC) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The C++ compiler is used as linker so we must use $wl # flag to pass the commands to the underlying system - # linker. + # linker. We must also pass each convience library through + # to the system linker between allextract/defaultextract. + # The C++ compiler will combine linker options so we + # cannot just pass the convience library names through + # without $wl. # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -9143,9 +9280,9 @@ # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; - gcx) + gcx*) # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' @@ -9155,9 +9292,9 @@ if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | grep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -9166,9 +9303,9 @@ else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -9186,7 +9323,7 @@ ;; tandem*) case $cc_basename in - NCC) + NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -9296,7 +9433,7 @@ # The `*' in the case matches for architectures that use `case' in # $output_verbose_cmd can trigger glob expansion during the loop # eval without this substitution. - output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" + output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` for p in `eval $output_verbose_link_cmd`; do case $p in @@ -9336,7 +9473,7 @@ fi ;; - *.$objext|*.$libext) + *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then @@ -9372,6 +9509,21 @@ $rm -f confest.$objext +# PORTME: override above test on systems where it is broken +ifelse([$1],[CXX], +[case $host_os in +solaris*) + case $cc_basename in + CC*) + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun' + ;; + esac +esac +]) + case " $_LT_AC_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac @@ -9422,12 +9574,16 @@ # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${F77-"f77"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +_LT_CC_BASENAME([$compiler]) AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) @@ -9437,7 +9593,7 @@ # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -9445,8 +9601,10 @@ postinstall_cmds='$RANLIB $lib' fi ;; -aix4*) - test "$enable_shared" = yes && enable_static=no +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi ;; esac AC_MSG_RESULT([$enable_shared]) @@ -9497,20 +9655,27 @@ lt_simple_compile_test_code="class foo {}\n" # Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${GCJ-"gcj"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds + ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly @@ -9557,11 +9722,16 @@ # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${RC-"windres"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes AC_LIBTOOL_CONFIG($1) @@ -9587,11 +9757,12 @@ # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST - fi + fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ @@ -9641,7 +9812,7 @@ _LT_AC_TAGVAR(archive_cmds, $1) | \ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ _LT_AC_TAGVAR(module_cmds, $1) | \ - _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ @@ -9696,7 +9867,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -9707,11 +9878,11 @@ SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e s/^X//" +Xsed="$SED -e 1s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= @@ -9742,6 +9913,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -9772,7 +9949,7 @@ NM=$lt_NM # A symbol stripping program -STRIP=$STRIP +STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD @@ -9803,7 +9980,7 @@ libext="$libext" # Shared library suffix (normally ".so"). -shrext='$shrext' +shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" @@ -9818,7 +9995,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -10047,7 +10224,10 @@ # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. - test -f Makefile && make "$ltmain" + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi fi ])# AC_LIBTOOL_CONFIG @@ -10089,9 +10269,6 @@ # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" @@ -10113,6 +10290,13 @@ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; @@ -10120,7 +10304,7 @@ symcode='[[BCDEGQRST]]' ;; solaris* | sysv5*) - symcode='[[BDT]]' + symcode='[[BDRT]]' ;; sysv4) symcode='[[DFNSTU]]' @@ -10138,14 +10322,17 @@ # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) - symcode='[[ABCDGISTW]]' ;; + symcode='[[ABCDGIRSTW]]' ;; esac # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no @@ -10309,7 +10496,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) ;; *) @@ -10334,18 +10521,28 @@ ;; chorus*) case $cc_basename in - cxch68) + cxch68*) # Green Hills C++ Compiler # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; dgux*) case $cc_basename in - ec++) + ec++*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; - ghcx) + ghcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; @@ -10353,22 +10550,22 @@ ;; esac ;; - freebsd*) + freebsd* | kfreebsd*-gnu | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in - CC) + CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; - aCC) + aCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -10383,7 +10580,7 @@ ;; irix5* | irix6* | nonstopux*) case $cc_basename in - CC) + CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. @@ -10394,18 +10591,24 @@ ;; linux*) case $cc_basename in - KCC) + KCC*) # KAI C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; - icpc) + icpc* | ecpc*) # Intel C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - cxx) + ;; + pgCC*) + # Portland Group C++ compiler. + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. @@ -10422,25 +10625,25 @@ ;; mvs*) case $cc_basename in - cxx) + cxx*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) ;; osf3* | osf4* | osf5*) case $cc_basename in - KCC) + KCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; - RCC) + RCC*) # Rational C++ 2.4.1 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; - cxx) + cxx*) # Digital/Compaq C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha @@ -10456,7 +10659,7 @@ ;; sco*) case $cc_basename in - CC) + CC*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; *) @@ -10465,13 +10668,13 @@ ;; solaris*) case $cc_basename in - CC) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; - gcx) + gcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; @@ -10481,12 +10684,12 @@ ;; sunos4*) case $cc_basename in - CC) + CC*) # Sun C++ 4.x _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; - lcc) + lcc*) # Lucid _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; @@ -10496,7 +10699,7 @@ ;; tandem*) case $cc_basename in - NCC) + NCC*) # NonStop-UX NCC 3.20 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; @@ -10567,7 +10770,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -10593,6 +10796,16 @@ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being @@ -10604,7 +10817,7 @@ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -10628,12 +10841,19 @@ ;; linux*) - case $CC in + case $cc_basename in icc* | ecc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; ccc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. @@ -10654,9 +10874,14 @@ ;; solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac ;; sunos4*) @@ -10678,6 +10903,11 @@ fi ;; + unicos*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + uts4*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' @@ -10705,7 +10935,7 @@ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= @@ -10738,7 +10968,10 @@ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + linux*) + _LT_AC_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' @@ -10764,7 +10997,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= - _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* @@ -10781,7 +11014,8 @@ # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= - + # Just being paranoid about ensuring that cc_basename is set. + _LT_CC_BASENAME([$compiler]) case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time @@ -10801,6 +11035,27 @@ # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) @@ -10838,7 +11093,7 @@ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi @@ -10848,13 +11103,13 @@ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -10863,19 +11118,51 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=no else - ld_shlibs=no + _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -10893,8 +11180,8 @@ EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi @@ -10909,24 +11196,19 @@ *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) @@ -10960,9 +11242,20 @@ else _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi @@ -10979,7 +11272,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) + case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -11000,6 +11293,9 @@ fi esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -11008,29 +11304,29 @@ shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' + shared_flag='${wl}-G' else - shared_flag='-qmkshrobj' + shared_flag='${wl}-bM:SRE' fi fi fi - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX @@ -11044,8 +11340,8 @@ # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -11058,7 +11354,7 @@ _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - bsdi4*) + bsdi[[45]]*) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; @@ -11068,69 +11364,69 @@ # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext=".dll" + shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) - if test "$GXX" = yes ; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi ;; dgux*) @@ -11163,8 +11459,8 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $compiler_flags $libobjs $deplibs' + freebsd* | kfreebsd*-gnu | dragonfly*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -11172,7 +11468,7 @@ hpux9*) if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi @@ -11188,16 +11484,16 @@ hpux10* | hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ;; @@ -11207,7 +11503,7 @@ esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' @@ -11240,7 +11536,7 @@ irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' @@ -11250,7 +11546,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -11273,7 +11569,8 @@ _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else @@ -11283,7 +11580,7 @@ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac @@ -11294,14 +11591,14 @@ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def' + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' @@ -11313,13 +11610,13 @@ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -11338,10 +11635,12 @@ solaris*) _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + wlarc='${wl}' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp' + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else + wlarc='' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' @@ -11350,8 +11649,18 @@ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + *) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; @@ -11360,7 +11669,7 @@ if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -11420,9 +11729,9 @@ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -11480,7 +11789,7 @@ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) $rm conftest* printf "$lt_simple_compile_test_code" > conftest.$ac_ext - + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest @@ -11614,7 +11923,7 @@ # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && break + test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in --- qtparted-0.4.5.orig/doc/Makefile.in +++ qtparted-0.4.5/doc/Makefile.in @@ -1,44 +1,501 @@ -# Makefile.in generated by unsermake -#################################### +# Makefile.in generated by automake 1.7.9 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 1.3 $ +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. -top_builddir = .. -top_srcdir = @top_srcdir@ -srcdir = @srcdir@ -.FORWARDS: all install install-data install-exec clean check force-reedit +@SET_MAKE@ -all: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) all - -install: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install - -install-data: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-data - -install-exec: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-exec - -clean: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) clean - -check: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) check +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. -force-reedit: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) force-reedit +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFAULT_DEBUG_LEVEL = @DEFAULT_DEBUG_LEVEL@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +FILESYS_EXT3FS_SUPPORT = @FILESYS_EXT3FS_SUPPORT@ +FILESYS_JFS_SUPPORT = @FILESYS_JFS_SUPPORT@ +FILESYS_NTFS_SUPPORT = @FILESYS_NTFS_SUPPORT@ +FILESYS_REISERFS_SUPPORT = @FILESYS_REISERFS_SUPPORT@ +FILESYS_XFS_SUPPORT = @FILESYS_XFS_SUPPORT@ +FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@ +FSPATH_MKFSEXT3 = @FSPATH_MKFSEXT3@ +FSPATH_MKFSJFS = @FSPATH_MKFSJFS@ +FSPATH_MKFSXFS = @FSPATH_MKFSXFS@ +FSPATH_MKNTFS = @FSPATH_MKNTFS@ +FSPATH_MOUNT = @FSPATH_MOUNT@ +FSPATH_NTFSRESIZE = @FSPATH_NTFSRESIZE@ +FSPATH_UMOUNT = @FSPATH_UMOUNT@ +FSPATH_XFS_GROWFS = @FSPATH_XFS_GROWFS@ +HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@ +HOMEPAGE = @HOMEPAGE@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KDE_CHECK_PLUGIN = @KDE_CHECK_PLUGIN@ +KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ +KDE_MT_LIBS = @KDE_MT_LIBS@ +KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@ +KDE_PLUGIN = @KDE_PLUGIN@ +KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ +KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ +KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ +KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ +KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@ +KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@ +LDFLAGS = @LDFLAGS@ +LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@ +LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@ +LIBCOMPAT = @LIBCOMPAT@ +LIBCRYPT = @LIBCRYPT@ +LIBDL = @LIBDL@ +LIBJPEG = @LIBJPEG@ +LIBOBJS = @LIBOBJS@ +LIBPNG = @LIBPNG@ +LIBPTHREAD = @LIBPTHREAD@ +LIBRESOLV = @LIBRESOLV@ +LIBS = @LIBS@ +LIBSM = @LIBSM@ +LIBSOCKET = @LIBSOCKET@ +LIBTOOL = @LIBTOOL@ +LIBUCB = @LIBUCB@ +LIBUTIL = @LIBUTIL@ +LIBZ = @LIBZ@ +LIB_POLL = @LIB_POLL@ +LIB_QPE = @LIB_QPE@ +LIB_QT = @LIB_QT@ +LIB_X11 = @LIB_X11@ +LIB_XEXT = @LIB_XEXT@ +LIB_XRENDER = @LIB_XRENDER@ +LN_S = @LN_S@ +LOGDIR = @LOGDIR@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ +MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ +MAKEINFO = @MAKEINFO@ +MOC = @MOC@ +NOOPT_CFLAGS = @NOOPT_CFLAGS@ +NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ +OBJEXT = @OBJEXT@ +OS = @OS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_QTDIR = @PATH_QTDIR@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +QTE_NORTTI = @QTE_NORTTI@ +QTPARTED_LDFLAGS = @QTPARTED_LDFLAGS@ +QTPARTED_LIBS = @QTPARTED_LIBS@ +QTPARTED_PREFIX = @QTPARTED_PREFIX@ +QTPATH_LRELEASE = @QTPATH_LRELEASE@ +QT_INCLUDES = @QT_INCLUDES@ +QT_LDFLAGS = @QT_LDFLAGS@ +RANLIB = @RANLIB@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +UIC = @UIC@ +UIC_TR = @UIC_TR@ +USER_INCLUDES = @USER_INCLUDES@ +USER_LDFLAGS = @USER_LDFLAGS@ +USE_EXCEPTIONS = @USE_EXCEPTIONS@ +USE_RTTI = @USE_RTTI@ +USE_THREADS = @USE_THREADS@ +VERSION = @VERSION@ +WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_INCLUDES = @X_INCLUDES@ +X_LDFLAGS = @X_LDFLAGS@ +X_PRE_LIBS = @X_PRE_LIBS@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +ac_ct_RANLIB = @ac_ct_RANLIB@ +ac_ct_STRIP = @ac_ct_STRIP@ +all_includes = @all_includes@ +all_libraries = @all_libraries@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +include_x11_FALSE = @include_x11_FALSE@ +include_x11_TRUE = @include_x11_TRUE@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_qtver = @kde_qtver@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +qt_includes = @qt_includes@ +qt_libraries = @qt_libraries@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@ +unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@ +x_includes = @x_includes@ +x_libraries = @x_libraries@ +man1_MANS = qtparted.1 +subdir = doc +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = + +NROFF = nroff +MANS = $(man1_MANS) +DIST_COMMON = README $(srcdir)/Makefile.in Makefile.am +#>- all: all-am +#>+ 1 +all: docs-am all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu doc/Makefile +#>+ 3 + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu doc/Makefile + cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: + +man1dir = $(mandir)/man1 +install-man1: $(man1_MANS) $(man_MANS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(man1dir) + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ + $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ + done +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ + rm -f $(DESTDIR)$(man1dir)/$$inst; \ + done +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) + +top_distdir = .. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(MANS) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(man1dir) +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-am +#>+ 1 +clean: kde-rpo-clean clean-am + +#>- clean-am: clean-generic clean-libtool mostlyclean-am +#>+ 1 +clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-man + +install-exec-am: + +install-info: install-info-am + +install-man: install-man1 + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-info-am uninstall-man + +uninstall-man: uninstall-man1 + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-man1 install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ + uninstall-info-am uninstall-man uninstall-man1 + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: -$(top_builddir)/doc/Makefile: $(top_builddir)/config.status $(top_srcdir)/doc/Makefile.in - cd $(top_builddir) && $(SHELL) ./config.status doc/Makefile +#>+ 2 +KDE_DIST=qtparted.1 Makefile.in BUGS README.Debian TODO.txt DEVELOPER-FAQ run_qtparted.1 -all: $(top_builddir)/doc/Makefile -final: - @echo no programs available to recreate as final. Call in subdirs +#>+ 2 +docs-am: -.PHONY: all final +#>+ 6 +force-reedit: + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu doc/Makefile + cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-am + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck --- qtparted-0.4.5.orig/configure.ac +++ qtparted-0.4.5/configure.ac @@ -13,6 +13,7 @@ VERSION=0.4.5-cvs HOMEPAGE="http://qtparted.sourceforge.net/" AM_INIT_AUTOMAKE($PACKAGE, $VERSION) +AM_MAINTAINER_MODE dnl for bytesex stuff AC_C_BIGENDIAN --- qtparted-0.4.5.orig/qptypes.h +++ qtparted-0.4.5/qptypes.h @@ -0,0 +1,44 @@ +/* qptypes.h + * + * This is a generated file. Please modify `configure.in' + */ + +#ifndef _QPTYPES_H +#define _QPTYPES_H + +typedef signed char gint8; +typedef signed char s8; +typedef unsigned char guint8; +typedef unsigned char u8; +typedef unsigned char BYTE; +typedef unsigned char BOOL; +typedef signed short gint16; +typedef signed short s16; +typedef unsigned short guint16; +typedef unsigned short u16; +typedef unsigned short WORD; +typedef signed long gint32; +typedef signed long s32; +typedef unsigned long guint32; +typedef unsigned long u32; +typedef unsigned long DWORD; + +#if defined (__GNUC__) && (__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 8)) +# define G_GNUC_EXTENSION __extension__ +#else +# define G_GNUC_EXTENSION +#endif + +#define G_HAVE_GINT64 1 + +G_GNUC_EXTENSION typedef signed long long gint64; +G_GNUC_EXTENSION typedef signed long long s64; +G_GNUC_EXTENSION typedef unsigned long long u64; +G_GNUC_EXTENSION typedef unsigned long long guint64; +G_GNUC_EXTENSION typedef unsigned long long QWORD; + +#define ENDIAN_LITTLE + +#define G_GINT64_CONSTANT(val) (G_GNUC_EXTENSION (val##LL)) + +#endif /* _QPTYPES_H_ */ --- qtparted-0.4.5.orig/config.h.in +++ qtparted-0.4.5/config.h.in @@ -3,24 +3,63 @@ /* "Enable if you are a developer" */ #undef DEVEL_SUPPORT +/* Define to 1 if you have the header file. */ +#undef HAVE_CARBON_CARBON_H + +/* Define if you have the CoreAudio API */ +#undef HAVE_COREAUDIO + +/* Define to 1 if you have the header file. */ +#undef HAVE_CRT_EXTERNS_H + +/* Defines if your system has the crypt function */ +#undef HAVE_CRYPT + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the `dl' library (-ldl). */ #undef HAVE_LIBDL +/* Define if you have libjpeg */ +#undef HAVE_LIBJPEG + /* Define to 1 if you have the `parted' library (-lparted). */ #undef HAVE_LIBPARTED +/* Define if you have libpng */ +#undef HAVE_LIBPNG + +/* Define if you have a working libpthread (will enable threaded code) */ +#undef HAVE_LIBPTHREAD + /* Define to 1 if you have the `reiserfs' library (-lreiserfs). */ #undef HAVE_LIBREISERFS /* Define to 1 if you have the `uuid' library (-luuid). */ #undef HAVE_LIBUUID +/* Define if you have libz */ +#undef HAVE_LIBZ + /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H +/* Define if your system needs _NSGetEnviron to set up the environment */ +#undef HAVE_NSGETENVIRON + +/* Define if you have res_init */ +#undef HAVE_RES_INIT + +/* Define if you have the res_init prototype */ +#undef HAVE_RES_INIT_PROTO + +/* Define to 1 if you have the `snprintf' function. */ +#undef HAVE_SNPRINTF + /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H @@ -33,6 +72,21 @@ /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H +/* Define if you have strlcat */ +#undef HAVE_STRLCAT + +/* Define if you have the strlcat prototype */ +#undef HAVE_STRLCAT_PROTO + +/* Define if you have strlcpy */ +#undef HAVE_STRLCPY + +/* Define if you have the strlcpy prototype */ +#undef HAVE_STRLCPY_PROTO + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_BITYPES_H + /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H @@ -42,9 +96,18 @@ /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H +/* Define to 1 if you have the `vsnprintf' function. */ +#undef HAVE_VSNPRINTF + /* "official web site" */ #undef HOMEPAGE +/* Suffix for lib directories */ +#undef KDELIBSUFF + +/* Name of package */ +#undef PACKAGE + /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT @@ -66,6 +129,9 @@ /* Define if you wish to run as QWS client */ #undef QWS_CLIENT +/* The size of a `char *', as computed by sizeof. */ +#undef SIZEOF_CHAR_P + /* The size of a `int', as computed by sizeof. */ #undef SIZEOF_INT @@ -78,6 +144,12 @@ /* The size of a `short', as computed by sizeof. */ #undef SIZEOF_SHORT +/* The size of a `size_t', as computed by sizeof. */ +#undef SIZEOF_SIZE_T + +/* The size of a `unsigned long', as computed by sizeof. */ +#undef SIZEOF_UNSIGNED_LONG + /* The size of a `void *', as computed by sizeof. */ #undef SIZEOF_VOID_P @@ -87,16 +159,113 @@ /* Define to 1 if your declares `struct tm'. */ #undef TM_IN_SYS_TIME +/* Version number of package */ +#undef VERSION + /* Define to 1 if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel and VAX). */ #undef WORDS_BIGENDIAN +/* + * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system + * headers and I'm too lazy to write a configure test as long as only + * unixware is related + */ +#ifdef _UNIXWARE +#define HAVE_BOOLEAN +#endif + + + +/* + * AIX defines FD_SET in terms of bzero, but fails to include + * that defines bzero. + */ + +#if defined(_AIX) +#include +#endif + + + +#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) +# include +# include +# define environ (*_NSGetEnviron()) +#endif + + /* Number of bits in a file offset, on hosts where this is settable. */ #undef _FILE_OFFSET_BITS + +#if !defined(HAVE_RES_INIT_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +int res_init(void); +#ifdef __cplusplus +} +#endif +#endif + + + +#if !defined(HAVE_STRLCAT_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +unsigned long strlcat(char*, const char*, unsigned long); +#ifdef __cplusplus +} +#endif +#endif + + + +#if !defined(HAVE_STRLCPY_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +unsigned long strlcpy(char*, const char*, unsigned long); +#ifdef __cplusplus +} +#endif +#endif + + /* Define for large files, on AIX-style hosts. */ #undef _LARGE_FILES + +/* + * On HP-UX, the declaration of vsnprintf() is needed every time ! + */ + +#if !defined(HAVE_VSNPRINTF) || defined(hpux) +#if __STDC__ +#include +#include +#else +#include +#endif +#ifdef __cplusplus +extern "C" +#endif +int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); +#ifdef __cplusplus +extern "C" +#endif +int snprintf(char *str, size_t n, char const *fmt, ...); +#endif + + + +#if defined(__SVR4) && !defined(__svr4__) +#define __svr4__ 1 +#endif + + /* Define to empty if `const' does not conform to ANSI C. */ #undef const @@ -106,5 +275,12 @@ #undef inline #endif +/* type to use in place of socklen_t if not defined */ +#undef kde_socklen_t + +/* type to use in place of socklen_t if not defined (deprecated, use + kde_socklen_t) */ +#undef ksize_t + /* Define to `unsigned' if does not define. */ #undef size_t --- qtparted-0.4.5.orig/Makefile.in +++ qtparted-0.4.5/Makefile.in @@ -1,8 +1,44 @@ -# Makefile.in generated by unsermake -#################################### +# Makefile.in generated by automake 1.7.9 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 1.3 $ +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ -top_builddir = . srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = . + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ @@ -92,6 +128,9 @@ LN_S = @LN_S@ LOGDIR = @LOGDIR@ LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ +MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MOC = @MOC@ NOOPT_CFLAGS = @NOOPT_CFLAGS@ @@ -146,8 +185,6 @@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -155,8 +192,6 @@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ -depcomp = $(SHELL) $(top_srcdir)/depcomp - exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ @@ -173,8 +208,6 @@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ -mkdir_p = @mkdir_p@ -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ @@ -188,68 +221,528 @@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ -top_srcdir = @top_srcdir@ unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@ unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@ x_includes = @x_includes@ x_libraries = @x_libraries@ -transform = @program_transform_name@ -INSTALL = @INSTALL@ -UNSERMAKE = /usr/share/unsermake/unsermake -.FORWARDS: all install install-data install-exec clean check force-reedit - -all: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) all - -install: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install - -install-data: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-data - -install-exec: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-exec - -clean: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) clean - -check: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) check - -force-reedit: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) force-reedit - -$(top_builddir)/Makefile: $(top_builddir)/config.status $(top_srcdir)/Makefile.in - cd $(top_builddir) && $(SHELL) ./config.status Makefile - -$(top_builddir)/config.h: $(top_builddir)/stamp-h1 - @if test ! -f $(top_builddir)/config.h; then \ - rm -f $(top_builddir)/stamp-h1; \ - cd $(top_builddir)/ && $(MAKE) stamp-h1; \ +SUBDIRS = src data ts doc +EXTRA_DIST = admin AUTHORS COPYING ChangeLog INSTALL README TODO qtparted.lsm +AUTOMAKE_OPTIONS = foreign + +MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = + +#>- RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ +#>- ps-recursive install-info-recursive uninstall-info-recursive \ +#>- all-recursive install-data-recursive install-exec-recursive \ +#>- installdirs-recursive install-recursive uninstall-recursive \ +#>- check-recursive installcheck-recursive +#>+ 5 +RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ + ps-recursive install-info-recursive uninstall-info-recursive \ + all-recursive install-data-recursive install-exec-recursive \ + installdirs-recursive install-recursive uninstall-recursive \ + check-recursive installcheck-recursive nmcheck-recursive bcheck-recursive +DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure AUTHORS \ + COPYING ChangeLog INSTALL Makefile.am TODO acinclude.m4 \ + aclocal.m4 config.guess config.h.in config.sub configure \ + configure.ac depcomp install-sh ltmain.sh missing mkinstalldirs +DIST_SUBDIRS = $(SUBDIRS) +#>- all: config.h +#>+ 1 +all: docs-am config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: + +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --foreign Makefile +#>+ 3 + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile + cd $(top_srcdir) && perl admin/am_edit Makefile.in +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) + +$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +#>- cd $(srcdir) && $(AUTOCONF) +#>+ 2 + cd $(srcdir) && rm -f configure + cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure + +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.ac acinclude.m4 + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) stamp-h1; \ else :; fi -$(top_builddir)/stamp-h1: $(top_srcdir)/config.h.in $(top_builddir)/config.status - @rm -f $(top_builddir)/stamp-h1 +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h -$(top_srcdir)/config.h.in: $(top_srcdir)/configure.ac +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(top_srcdir)/configure.ac $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOHEADER) - rm -f $(top_builddir)/stamp-h1 - touch $(top_srcdir)/config.h.in + touch $(srcdir)/config.h.in + +distclean-hdr: + -rm -f config.h stamp-h1 + +mostlyclean-libtool: + -rm -f *.lo -all: $(top_builddir)/Makefile -distclean: distclean-hdr-top -distclean-hdr-top: - -rm -f $(top_builddir)/config.h $(top_builddir)/stamp-h1 +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ETAGS = etags +ETAGSFLAGS = + +CTAGS = ctags +CTAGSFLAGS = + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if (etags --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + else \ + include_option=--include; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$tags$$unique" \ + || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique + +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) + +top_distdir = . +distdir = $(PACKAGE)-$(VERSION) + +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } + +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print + +distdir: $(DISTFILES) + $(am__remove_distdir) + mkdir $(distdir) + $(mkinstalldirs) $(distdir)/data $(distdir)/src + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" \ + distdir=../$(distdir)/$$subdir \ + distdir) \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist dist-all: distdir + $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + $(am__remove_distdir) + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ + && rm -f $(distdir).tar.gz \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @echo "$(distdir).tar.gz is ready for distribution" | \ + sed 'h;s/./=/g;p;x;p;x' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile config.h +installdirs: installdirs-recursive +installdirs-am: + +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic clean-libtool mostlyclean-am +#>+ 1 +clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-info-am + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \ + clean-generic clean-libtool clean-recursive ctags \ + ctags-recursive dist dist-all dist-gzip distcheck distclean \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-recursive distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am dvi-recursive info info-am \ + info-recursive install install-am install-data install-data-am \ + install-data-recursive install-exec install-exec-am \ + install-exec-recursive install-info install-info-am \ + install-info-recursive install-man install-recursive \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am installdirs-recursive maintainer-clean \ + maintainer-clean-generic maintainer-clean-recursive mostlyclean \ + mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ + pdf pdf-am pdf-recursive ps ps-am ps-recursive tags \ + tags-recursive uninstall uninstall-am uninstall-info-am \ + uninstall-info-recursive uninstall-recursive + + +#$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs +# cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ; + +$(top_srcdir)/subdirs: + cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs + +$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in + @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4 + +package-messages: + $(MAKE) -f admin/Makefile.common package-messages + $(MAKE) -C po merge + +dist-hook: + cd $(top_distdir) && perl admin/am_edit -padmin + cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: -final: - @echo no programs available to recreate as final. Call in subdirs +#>+ 2 +KDE_DIST=stamp-h.in Makefile.in Makefile.dist Makefile.am.wo -.PHONY: all distclean distclean-hdr-top final +#>+ 2 +docs-am: + +#>+ 6 +force-reedit: + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile + cd $(top_srcdir) && perl admin/am_edit Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck --- qtparted-0.4.5.orig/configure +++ qtparted-0.4.5/configure @@ -280,15 +280,15 @@ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break @@ -465,7 +465,7 @@ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CPP EGREP WOVERLOADED_VIRTUAL HAVE_GCC_VISIBILITY unsermake_enable_pch_TRUE unsermake_enable_pch_FALSE USE_EXCEPTIONS USE_RTTI CXXCPP NOOPT_CXXFLAGS NOOPT_CFLAGS ENABLE_PERMISSIVE_FLAG LDFLAGS_AS_NEEDED LDFLAGS_NEW_DTAGS KDE_USE_FINAL_TRUE KDE_USE_FINAL_FALSE KDE_USE_CLOSURE_TRUE KDE_USE_CLOSURE_FALSE KDE_NO_UNDEFINED KDE_USE_NMCHECK_TRUE KDE_USE_NMCHECK_FALSE LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB F77 FFLAGS ac_ct_F77 LIBTOOL KDE_PLUGIN KDE_CHECK_PLUGIN OS QTPARTED_PREFIX LOGDIR DEFAULT_DEBUG_LEVEL HOMEPAGE FSPATH_MKNTFS FSPATH_NTFSRESIZE FSPATH_MKFSEXT3 FSPATH_MKFSJFS FSPATH_MKFSXFS FSPATH_MOUNT FSPATH_UMOUNT FSPATH_XFS_GROWFS FILESYS_REISERFS_SUPPORT FILESYS_EXT3FS_SUPPORT FILESYS_NTFS_SUPPORT FILESYS_JFS_SUPPORT FILESYS_XFS_SUPPORT LIBUTIL LIBCOMPAT LIBCRYPT LIBRESOLV LIB_POLL FRAMEWORK_COREAUDIO LIBSOCKET X_EXTRA_LIBS LIBUCB LIBDL include_x11_TRUE include_x11_FALSE X_PRE_LIBS LIB_X11 LIB_XRENDER LIBSM X_INCLUDES X_LDFLAGS x_includes x_libraries QTE_NORTTI LIB_XEXT LIBPTHREAD USE_THREADS KDE_MT_LDFLAGS KDE_MT_LIBS USER_INCLUDES USER_LDFLAGS LIBZ LIBPNG LIBJPEG qt_libraries qt_includes QT_INCLUDES QT_LDFLAGS PERL MOC UIC UIC_TR LIB_QT LIB_QPE kde_qtver PATH_QTDIR QTPATH_LRELEASE all_libraries all_includes QTPARTED_LDFLAGS QTPARTED_LIBS top_srcdir LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE am__leading_dot MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CPP EGREP WOVERLOADED_VIRTUAL HAVE_GCC_VISIBILITY unsermake_enable_pch_TRUE unsermake_enable_pch_FALSE USE_EXCEPTIONS USE_RTTI CXXCPP NOOPT_CXXFLAGS NOOPT_CFLAGS ENABLE_PERMISSIVE_FLAG LDFLAGS_AS_NEEDED LDFLAGS_NEW_DTAGS KDE_USE_FINAL_TRUE KDE_USE_FINAL_FALSE KDE_USE_CLOSURE_TRUE KDE_USE_CLOSURE_FALSE KDE_NO_UNDEFINED KDE_USE_NMCHECK_TRUE KDE_USE_NMCHECK_FALSE LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB F77 FFLAGS ac_ct_F77 LIBTOOL KDE_PLUGIN KDE_CHECK_PLUGIN OS QTPARTED_PREFIX LOGDIR DEFAULT_DEBUG_LEVEL HOMEPAGE FSPATH_MKNTFS FSPATH_NTFSRESIZE FSPATH_MKFSEXT3 FSPATH_MKFSJFS FSPATH_MKFSXFS FSPATH_MOUNT FSPATH_UMOUNT FSPATH_XFS_GROWFS FILESYS_REISERFS_SUPPORT FILESYS_EXT3FS_SUPPORT FILESYS_NTFS_SUPPORT FILESYS_JFS_SUPPORT FILESYS_XFS_SUPPORT LIBUTIL LIBCOMPAT LIBCRYPT LIBRESOLV LIB_POLL FRAMEWORK_COREAUDIO LIBSOCKET X_EXTRA_LIBS LIBUCB LIBDL include_x11_TRUE include_x11_FALSE X_PRE_LIBS LIB_X11 LIB_XRENDER LIBSM X_INCLUDES X_LDFLAGS x_includes x_libraries QTE_NORTTI LIB_XEXT LIBPTHREAD USE_THREADS KDE_MT_LDFLAGS KDE_MT_LIBS USER_INCLUDES USER_LDFLAGS LIBZ LIBPNG LIBJPEG qt_libraries qt_includes QT_INCLUDES QT_LDFLAGS PERL MOC UIC UIC_TR LIB_QT LIB_QPE kde_qtver PATH_QTDIR QTPATH_LRELEASE all_libraries all_includes QTPARTED_LDFLAGS QTPARTED_LIBS top_srcdir LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1028,8 +1028,10 @@ Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer + --disable-dependency-tracking Speeds up one-time builds + --enable-dependency-tracking Do not reject slow dependency extractors --enable-debug=ARG enables debug symbols (yes|no|full) default=no --disable-debug disables debug output and debug symbols default=no --enable-strict compiles with strict compiler options (may not @@ -1194,7 +1196,7 @@ else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi - cd $ac_popdir + cd "$ac_popdir" done fi @@ -1670,7 +1672,7 @@ PACKAGE=qtparted VERSION=0.4.5-cvs HOMEPAGE="http://qtparted.sourceforge.net/" -am__api_version="1.9" +am__api_version="1.7" test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL @@ -1841,6 +1843,7 @@ program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed + # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` @@ -1854,39 +1857,6 @@ echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi -if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi - for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. @@ -1965,7 +1935,7 @@ fi rmdir .tst 2>/dev/null -# test to see if srcdir already configured + # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 @@ -2013,6 +1983,9 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +AMTAR=${AMTAR-"${am_missing_run}tar"} + install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -2105,14 +2078,31 @@ # We need awk for the "check" target. The system "awk" is bad on # some platforms. -# Always define AMTAR for backward compatibility. -AMTAR=${AMTAR-"${am_missing_run}tar"} -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' +echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi; + echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE @@ -2749,8 +2739,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2808,8 +2797,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2925,8 +2913,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2980,8 +2967,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3026,8 +3012,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3071,8 +3056,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3152,9 +3136,7 @@ : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + : > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf @@ -3182,14 +3164,9 @@ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + # (even with -Werror). So we grep stderr for any message + # that says an option was ignored. + if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi @@ -3256,8 +3233,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3299,8 +3275,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3357,8 +3332,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3452,13 +3426,14 @@ esac -echo "$as_me:$LINENO: checking for library containing strerror" >&5 -echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6 -if test "${ac_cv_search_strerror+set}" = set; then + + echo "$as_me:$LINENO: checking for strerror in -lcposix" >&5 +echo $ECHO_N "checking for strerror in -lcposix... $ECHO_C" >&6 +if test "${ac_cv_lib_cposix_strerror+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_func_search_save_LIBS=$LIBS -ac_cv_search_strerror=no + ac_check_lib_save_LIBS=$LIBS +LIBS="-lcposix $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -3490,63 +3465,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_search_strerror="none required" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test "$ac_cv_search_strerror" = no; then - for ac_lib in cposix; do - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char strerror (); -int -main () -{ -strerror (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3558,25 +3477,24 @@ ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_search_strerror="-l$ac_lib" -break + ac_cv_lib_cposix_strerror=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_lib_cposix_strerror=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - done +LIBS=$ac_check_lib_save_LIBS fi -LIBS=$ac_func_search_save_LIBS +echo "$as_me:$LINENO: result: $ac_cv_lib_cposix_strerror" >&5 +echo "${ECHO_T}$ac_cv_lib_cposix_strerror" >&6 +if test $ac_cv_lib_cposix_strerror = yes; then + LIBS="$LIBS -lcposix" fi -echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 -echo "${ECHO_T}$ac_cv_search_strerror" >&6 -if test "$ac_cv_search_strerror" != no; then - test "$ac_cv_search_strerror" = "none required" || LIBS="$ac_cv_search_strerror $LIBS" -fi + ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -3945,8 +3863,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4004,8 +3921,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4121,8 +4037,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4176,8 +4091,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4222,8 +4136,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4267,8 +4180,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4348,9 +4260,7 @@ : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + : > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf @@ -4378,14 +4288,9 @@ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + # (even with -Werror). So we grep stderr for any message + # that says an option was ignored. + if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi @@ -4561,8 +4466,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4620,8 +4524,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4692,8 +4595,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4737,8 +4639,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4812,9 +4713,7 @@ : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + : > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf @@ -4842,14 +4741,9 @@ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + # (even with -Werror). So we grep stderr for any message + # that says an option was ignored. + if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi @@ -5256,8 +5150,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5317,8 +5210,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5392,8 +5284,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5563,8 +5454,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5629,8 +5519,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5694,8 +5583,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6170,8 +6058,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6229,8 +6116,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6346,8 +6232,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6401,8 +6286,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6447,8 +6331,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6492,8 +6375,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6573,9 +6455,7 @@ : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + : > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf @@ -6603,14 +6483,9 @@ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + # (even with -Werror). So we grep stderr for any message + # that says an option was ignored. + if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi @@ -7050,8 +6925,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7109,8 +6983,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7181,8 +7054,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7226,8 +7098,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7301,9 +7172,7 @@ : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + : > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf @@ -7331,14 +7200,9 @@ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + # (even with -Werror). So we grep stderr for any message + # that says an option was ignored. + if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi @@ -7405,8 +7269,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7517,8 +7380,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7606,8 +7468,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7709,8 +7570,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7809,8 +7669,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7894,8 +7753,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7984,8 +7842,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8072,8 +7929,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8160,8 +8016,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8267,8 +8122,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8355,8 +8209,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8443,8 +8296,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8531,8 +8383,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8663,8 +8514,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8752,8 +8602,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8840,8 +8689,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8928,8 +8776,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9016,8 +8863,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9104,8 +8950,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9528,8 +9373,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9655,8 +9499,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9744,8 +9587,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9875,8 +9717,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9955,8 +9796,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10170,7 +10010,7 @@ # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && break + test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in @@ -10260,7 +10100,7 @@ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. + # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &6 else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. + # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 @@ -10410,44 +10259,36 @@ lt_cv_deplibs_check_method=pass_all ;; -bsdi4*) +bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) - lt_cv_deplibs_check_method=pass_all + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) - # win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='win32_libid' + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump'. + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) - # this will be overwritten by pass_all, but leave it in just in case - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[012]) - lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac lt_cv_deplibs_check_method=pass_all ;; -freebsd*) +freebsd* | kfreebsd*-gnu | dragonfly*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; @@ -10463,7 +10304,7 @@ hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file - case "$host_cpu" in + case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so @@ -10480,42 +10321,21 @@ ;; irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" - ;; + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux*) - case $host_cpu in - alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* ) - lt_cv_deplibs_check_method=pass_all ;; - # the debian people say, arm and glibc 2.3.1 works for them with pass_all - arm* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + lt_cv_deplibs_check_method=pass_all ;; -netbsd*) +netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else @@ -10534,19 +10354,14 @@ ;; openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; @@ -10556,7 +10371,6 @@ solaris*) lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) @@ -10633,7 +10447,7 @@ ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 10636 "configure"' > conftest.$ac_ext + echo '#line 10450 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -10676,14 +10490,13 @@ ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.o` in *32-bit*) - LINUX_64_MODE="32" case $host in x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; - ppc64-*linux*) + ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) @@ -10695,7 +10508,6 @@ esac ;; *64-bit*) - LINUX_64_MODE="64" case $host in x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" @@ -10755,8 +10567,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10831,8 +10642,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10947,6 +10757,243 @@ done + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 +if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CXXCPP=$CXXCPP + +fi + CXXCPP=$ac_cv_prog_CXXCPP +else + ac_cv_prog_CXXCPP=$CXXCPP +fi +echo "$as_me:$LINENO: result: $CXXCPP" >&5 +echo "${ECHO_T}$CXXCPP" >&6 +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +fi + ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -11039,7 +11086,7 @@ # Provide some information about the compiler. -echo "$as_me:11042:" \ +echo "$as_me:11089:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -11085,8 +11132,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11135,8 +11181,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11194,7 +11239,7 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else i=0 - testring="ABCD" + teststring="ABCD" case $build_os in msdosdjgpp*) @@ -11223,20 +11268,53 @@ lt_cv_sys_max_cmd_len=8192; ;; - *) + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + *) # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` - testring=$testring$testring + teststring=$teststring$teststring done - testring= + teststring= # Add a significant safety factor because C++ compilers can tack on massive # amounts of additional arguments before passing them to the linker. # It appears as though 1/2 is a usable value. @@ -11273,9 +11351,6 @@ # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" @@ -11297,6 +11372,13 @@ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -11304,7 +11386,7 @@ symcode='[BCDEGQRST]' ;; solaris* | sysv5*) - symcode='[BDT]' + symcode='[BDRT]' ;; sysv4) symcode='[DFNSTU]' @@ -11322,14 +11404,17 @@ # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) - symcode='[ABCDGISTW]' ;; + symcode='[ABCDGIRSTW]' ;; esac # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no @@ -11491,7 +11576,7 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' +Xsed='sed -e 1s/^X//' sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' # Same as above, but do not quote variable references. @@ -11511,7 +11596,7 @@ default_ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except M$VC, +# All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" @@ -11796,6 +11881,17 @@ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) @@ -11821,7 +11917,7 @@ if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then @@ -11883,7 +11979,7 @@ if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then @@ -11982,6 +12078,20 @@ compiler=$CC +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + # # Check for any special shared library compilation flags. # @@ -12018,11 +12128,16 @@ LDFLAGS="$LDFLAGS $lt_prog_compiler_static" printf "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized + # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed > conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_static_works=yes + fi else lt_prog_compiler_static_works=yes fi @@ -12042,10 +12157,6 @@ -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... lt_prog_compiler_no_builtin_flag= @@ -12068,18 +12179,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12074: $lt_compile\"" >&5) + (eval echo "\"\$as_me:12185: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:12078: \$? = $ac_status" >&5 + echo "$as_me:12189: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi @@ -12156,7 +12269,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -12182,6 +12295,16 @@ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic='-qnocommon' + lt_prog_compiler_wl='-Wl,' + ;; + esac + ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being @@ -12193,7 +12316,7 @@ lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -12217,12 +12340,19 @@ ;; linux*) - case $CC in + case $cc_basename in icc* | ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. @@ -12243,9 +12373,14 @@ ;; solaris*) - lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac ;; sunos4*) @@ -12267,6 +12402,11 @@ fi ;; + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' @@ -12301,18 +12441,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12307: $lt_compile\"" >&5) + (eval echo "\"\$as_me:12447: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:12311: \$? = $ac_status" >&5 + echo "$as_me:12451: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then lt_prog_compiler_pic_works=yes fi fi @@ -12333,7 +12475,7 @@ fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= @@ -12355,38 +12497,36 @@ mkdir out printf "$lt_simple_compile_test_code" > conftest.$ac_ext - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12374: $lt_compile\"" >&5) + (eval echo "\"\$as_me:12509: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:12378: \$? = $ac_status" >&5 + echo "$as_me:12513: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp + $SED '/^$/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi - chmod u+w . - $rm conftest* out/* - rmdir out + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* @@ -12457,6 +12597,16 @@ # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) @@ -12477,6 +12627,27 @@ # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) @@ -12514,7 +12685,7 @@ allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi @@ -12524,13 +12695,13 @@ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=no + allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -12539,19 +12710,51 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' else ld_shlibs=no fi ;; - netbsd*) + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + link_all_deplibs=no + else + ld_shlibs=no + fi + ;; + + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -12569,8 +12772,8 @@ EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -12585,24 +12788,19 @@ *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) @@ -12636,9 +12834,20 @@ else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi @@ -12655,7 +12864,7 @@ link_all_deplibs=yes if test "$GCC" = yes; then - case $host_os in aix4.012|aix4.012.*) + case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -12676,6 +12885,9 @@ fi esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -12684,21 +12896,22 @@ shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' + shared_flag='${wl}-G' else - shared_flag='-qmkshrobj' + shared_flag='${wl}-bM:SRE' fi fi fi - # Let the compiler handle the export list. - always_export_symbols=no + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -12722,8 +12935,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -12750,14 +12962,13 @@ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_cmds="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF @@ -12784,8 +12995,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -12822,8 +13032,8 @@ # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec=' ' archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -12836,7 +13046,7 @@ ld_shlibs=no ;; - bsdi4*) + bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; @@ -12846,13 +13056,13 @@ # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' - allow_undefined_flag=no + allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext=".dll" + shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_From_new_cmds='true' # FIXME: Should let the user specify the lib program. @@ -12862,52 +13072,52 @@ ;; darwin* | rhapsody*) - if test "$GXX" = yes ; then - archive_cmds_need_lc=no - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.012) - allow_undefined_flag='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - allow_undefined_flag='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - else - archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' - fi - module_cmds='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='-all_load $convenience' + whole_archive_flag_spec='' link_all_deplibs=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else - ld_shlibs=no + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs=no + ;; + esac fi ;; @@ -12941,8 +13151,8 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $compiler_flags $libobjs $deplibs' + freebsd* | kfreebsd*-gnu | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no @@ -12950,7 +13160,7 @@ hpux9*) if test "$GCC" = yes; then - archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi @@ -12966,16 +13176,16 @@ hpux10* | hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ;; @@ -12985,7 +13195,7 @@ esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld='+b $libdir' @@ -13018,7 +13228,7 @@ irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - archive_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_ld='-rpath $libdir' @@ -13028,7 +13238,7 @@ link_all_deplibs=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -13051,7 +13261,8 @@ hardcode_direct=yes hardcode_shlibpath_var=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else @@ -13061,7 +13272,7 @@ hardcode_libdir_flag_spec='-R$libdir' ;; *) - archive_cmds='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac @@ -13072,14 +13283,14 @@ hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def' + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' @@ -13091,13 +13302,13 @@ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' @@ -13116,10 +13327,12 @@ solaris*) no_undefined_flag=' -z text' if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + wlarc='${wl}' + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp' + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else + wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' @@ -13128,8 +13341,18 @@ hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + *) + whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; esac link_all_deplibs=yes ;; @@ -13138,7 +13361,7 @@ if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -13198,9 +13421,9 @@ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) no_undefined_flag='${wl}-z ${wl}text' if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no @@ -13306,7 +13529,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext=".so" +shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -13316,7 +13539,20 @@ version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi need_lib_prefix=unknown hardcode_into_libs=no @@ -13381,7 +13617,7 @@ amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) @@ -13390,7 +13626,7 @@ shlibpath_var=LIBRARY_PATH ;; -bsdi4*) +bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -13406,7 +13642,7 @@ cygwin* | mingw* | pw32*) version_type=windows - shrext=".dll" + shrext_cmds=".dll" need_version=no need_lib_prefix=no @@ -13418,7 +13654,8 @@ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -13448,7 +13685,7 @@ ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; @@ -13471,7 +13708,7 @@ soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -13494,7 +13731,7 @@ dynamic_linker=no ;; -freebsd*-gnu*) +kfreebsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -13506,8 +13743,17 @@ dynamic_linker='GNU ld.so' ;; -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -13525,7 +13771,7 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - freebsd3.01* | freebsdelf3.01*) + freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; @@ -13552,9 +13798,9 @@ version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) - shrext='.so' + shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH @@ -13569,7 +13815,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) - shrext='.sl' + shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH @@ -13580,7 +13826,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) - shrext='.sl' + shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH @@ -13642,22 +13888,19 @@ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, @@ -13667,6 +13910,30 @@ dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + netbsd*) version_type=sunos need_lib_prefix=no @@ -13676,7 +13943,7 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi @@ -13705,7 +13972,11 @@ openbsd*) version_type=sunos need_lib_prefix=no - need_version=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH @@ -13725,7 +13996,7 @@ os2*) libname_spec='$name' - shrext=".dll" + shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' @@ -13827,8 +14098,8 @@ echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 hardcode_action= if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var " || \ - test "X$hardcode_automatic"="Xyes" ; then + test -n "$runpath_var" || \ + test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct" != no && @@ -13954,8 +14225,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14058,8 +14328,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14124,8 +14393,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14218,8 +14486,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14284,8 +14551,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14351,8 +14617,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14418,8 +14683,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14494,7 +14758,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; @@ -14592,7 +14856,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; @@ -14708,7 +14972,7 @@ # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -14717,47 +14981,10 @@ fi ;; -aix4*) +aix4* | aix5*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi - ;; - darwin* | rhapsody*) - if test "$GCC" = yes; then - archive_cmds_need_lc=no - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.012) - allow_undefined_flag='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - allow_undefined_flag='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; - esac - output_verbose_link_cmd='echo' - archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - module_cmds='$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='-all_load $convenience' - link_all_deplibs=yes - else - ld_shlibs=no - fi ;; esac echo "$as_me:$LINENO: result: $enable_shared" >&5 @@ -14783,7 +15010,8 @@ # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ @@ -14886,7 +15114,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -14897,11 +15125,11 @@ SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e s/^X//" +Xsed="$SED -e 1s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= @@ -14931,6 +15159,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -14961,7 +15195,7 @@ NM=$lt_NM # A symbol stripping program -STRIP=$STRIP +STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD @@ -14992,7 +15226,7 @@ libext="$libext" # Shared library suffix (normally ".so"). -shrext='$shrext' +shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" @@ -15007,7 +15241,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -15234,7 +15468,10 @@ # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. - test -f Makefile && make "$ltmain" + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi fi @@ -15299,7 +15536,9 @@ case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -15336,7 +15575,7 @@ compiler_lib_search_path_CXX= # Source file extension for C++ test sources. -ac_ext=cc +ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o @@ -15357,6 +15596,20 @@ compiler=$CC +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD @@ -15378,7 +15631,16 @@ CC=${CXX-"c++"} compiler=$CC compiler_CXX=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately @@ -15449,7 +15711,7 @@ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. + # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &6 else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. + # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15675,13 +15954,12 @@ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_cmds_CXX="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF @@ -15708,8 +15986,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15746,8 +16023,8 @@ # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_CXX=' ' archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -15760,16 +16037,17 @@ esac ;; + cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_CXX='-L$libdir' - allow_undefined_flag_CXX=no + allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=no enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -15778,70 +16056,81 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' else ld_shlibs_CXX=no fi ;; + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc_CXX=no + hardcode_direct_CXX=no + hardcode_automatic_CXX=yes + hardcode_shlibpath_var_CXX=unsupported + whole_archive_flag_spec_CXX='' + link_all_deplibs_CXX=yes - darwin* | rhapsody*) - if test "$GXX" = yes; then - archive_cmds_need_lc_CXX=no - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag_CXX='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_CXX='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.012) - allow_undefined_flag_CXX='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - allow_undefined_flag_CXX='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes fi - ;; - esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - else - archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' - fi - module_cmds_CXX='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - hardcode_direct_CXX=no - hardcode_automatic_CXX=yes - hardcode_shlibpath_var_CXX=unsupported - whole_archive_flag_spec_CXX='-all_load $convenience' - link_all_deplibs_CXX=yes - else - ld_shlibs_CXX=no - fi - ;; + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_CXX=no + ;; + esac + fi + ;; dgux*) case $cc_basename in - ec++) + ec++*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - ghcx) + ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -15852,14 +16141,14 @@ ;; esac ;; - freebsd12*) + freebsd[12]*) # C++ shared libraries reported to be fairly broken before switch to ELF ld_shlibs_CXX=no ;; freebsd-elf*) archive_cmds_need_lc_CXX=no ;; - freebsd*) + freebsd* | kfreebsd*-gnu | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions ld_shlibs_CXX=yes @@ -15876,12 +16165,12 @@ # location of the library. case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - aCC) - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + aCC*) + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -15890,11 +16179,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -15904,7 +16193,7 @@ ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld_CXX='+b $libdir' @@ -15920,7 +16209,7 @@ ;; esac fi - case "$host_cpu" in + case $host_cpu in hppa*64*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no @@ -15941,17 +16230,17 @@ esac case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - aCC) - case "$host_cpu" in + aCC*) + case $host_cpu in hppa*64*|ia64*) archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ;; *) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists @@ -15967,12 +16256,12 @@ *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then - case "$host_cpu" in + case $host_cpu in ia64*|hppa*64*) archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ;; *) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -15985,9 +16274,9 @@ ;; irix5* | irix6*) case $cc_basename in - CC) + CC*) # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -15998,9 +16287,9 @@ *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - archive_cmds_CXX='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi fi link_all_deplibs_CXX=yes @@ -16011,14 +16300,14 @@ ;; linux*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' - archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -16036,20 +16325,44 @@ # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; - icpc) + icpc*) # Intel C++ with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac archive_cmds_need_lc_CXX=no - archive_cmds_CXX='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; - cxx) + pgCC*) + # Portland Group C++ compiler + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) # Compaq C++ - archive_cmds_CXX='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_CXX='-rpath $libdir' @@ -16077,7 +16390,7 @@ ;; mvs*) case $cc_basename in - cxx) + cxx*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; @@ -16087,7 +16400,7 @@ ;; esac ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= @@ -16098,15 +16411,31 @@ # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; + openbsd2*) + # C++ shared libraries are fairly broken + ld_shlibs_CXX=no + ;; + openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + export_dynamic_flag_spec_CXX='${wl}-E' + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; osf3*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: @@ -16116,14 +16445,14 @@ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; - RCC) + RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - cxx) + cxx*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: @@ -16141,7 +16470,7 @@ *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: @@ -16160,13 +16489,13 @@ ;; osf4* | osf5*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: @@ -16175,17 +16504,17 @@ # the KAI C++ compiler. old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; - RCC) + RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - cxx) + cxx*) allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ $rm $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' @@ -16204,7 +16533,7 @@ *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: @@ -16228,7 +16557,7 @@ sco*) archive_cmds_need_lc_CXX=no case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; @@ -16240,12 +16569,12 @@ ;; sunos4*) case $cc_basename in - CC) + CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - lcc) + lcc*) # Lucid # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -16258,36 +16587,33 @@ ;; solaris*) case $cc_basename in - CC) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ + archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no case $host_os in - solaris2.0-5 | solaris2.0-5.*) ;; + solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The C++ compiler is used as linker so we must use $wl # flag to pass the commands to the underlying system - # linker. + # linker. We must also pass each convience library through + # to the system linker between allextract/defaultextract. + # The C++ compiler will combine linker options so we + # cannot just pass the convience library names through + # without $wl. # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; esac link_all_deplibs_CXX=yes - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -16295,9 +16621,9 @@ # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; - gcx) + gcx*) # Green Hills C++ Compiler - archive_cmds_CXX='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' @@ -16307,9 +16633,9 @@ if test "$GXX" = yes && test "$with_gnu_ld" = no; then no_undefined_flag_CXX=' ${wl}-z ${wl}defs' if $CC --version | grep -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -16318,9 +16644,9 @@ else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. - archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -16338,7 +16664,7 @@ ;; tandem*) case $cc_basename in - NCC) + NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -16365,10 +16691,6 @@ GCC_CXX="$GXX" LD_CXX="$LD" -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... cat > conftest.$ac_ext <&5) + (eval echo "\"\$as_me:17112: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:16764: \$? = $ac_status" >&5 + echo "$as_me:17116: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then lt_prog_compiler_pic_works_CXX=yes fi fi @@ -16786,7 +17140,7 @@ fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= @@ -16808,38 +17162,36 @@ mkdir out printf "$lt_simple_compile_test_code" > conftest.$ac_ext - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16827: $lt_compile\"" >&5) + (eval echo "\"\$as_me:17174: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:16831: \$? = $ac_status" >&5 + echo "$as_me:17178: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp + $SED '/^$/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi - chmod u+w . - $rm conftest* out/* - rmdir out + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* @@ -16889,7 +17241,10 @@ export_symbols_cmds_CXX="$ltdll_cmds" ;; cygwin* | mingw*) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + linux*) + link_all_deplibs_CXX=no ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' @@ -16972,7 +17327,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext=".so" +shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -16982,7 +17337,20 @@ version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi need_lib_prefix=unknown hardcode_into_libs=no @@ -17047,7 +17415,7 @@ amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) @@ -17056,7 +17424,7 @@ shlibpath_var=LIBRARY_PATH ;; -bsdi4*) +bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -17072,7 +17440,7 @@ cygwin* | mingw* | pw32*) version_type=windows - shrext=".dll" + shrext_cmds=".dll" need_version=no need_lib_prefix=no @@ -17084,7 +17452,8 @@ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -17114,7 +17483,7 @@ ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; @@ -17137,7 +17506,7 @@ soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -17160,7 +17529,7 @@ dynamic_linker=no ;; -freebsd*-gnu*) +kfreebsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -17172,8 +17541,17 @@ dynamic_linker='GNU ld.so' ;; -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -17191,7 +17569,7 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - freebsd3.01* | freebsdelf3.01*) + freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; @@ -17218,9 +17596,9 @@ version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) - shrext='.so' + shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH @@ -17235,7 +17613,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) - shrext='.sl' + shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH @@ -17246,7 +17624,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) - shrext='.sl' + shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH @@ -17308,22 +17686,19 @@ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, @@ -17333,6 +17708,30 @@ dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + netbsd*) version_type=sunos need_lib_prefix=no @@ -17342,7 +17741,7 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi @@ -17371,7 +17770,11 @@ openbsd*) version_type=sunos need_lib_prefix=no - need_version=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH @@ -17391,7 +17794,7 @@ os2*) libname_spec='$name' - shrext=".dll" + shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' @@ -17493,8 +17896,8 @@ echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || \ - test -n "$runpath_var CXX" || \ - test "X$hardcode_automatic_CXX"="Xyes" ; then + test -n "$runpath_var_CXX" || \ + test "X$hardcode_automatic_CXX" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_CXX" != no && @@ -17620,8 +18023,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17724,8 +18126,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17790,8 +18191,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17884,8 +18284,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17950,8 +18349,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18017,8 +18415,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18084,8 +18481,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18160,7 +18556,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; @@ -18258,7 +18654,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; @@ -18375,7 +18771,8 @@ # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ @@ -18475,6 +18872,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -18505,7 +18908,7 @@ NM=$lt_NM # A symbol stripping program -STRIP=$STRIP +STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD @@ -18536,7 +18939,7 @@ libext="$libext" # Shared library suffix (normally ".so"). -shrext='$shrext' +shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" @@ -18551,7 +18954,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -18753,7 +19156,10 @@ # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. - test -f Makefile && make "$ltmain" + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi fi @@ -18829,12 +19235,35 @@ compiler=$CC +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${F77-"f77"} compiler=$CC compiler_F77=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 @@ -18847,7 +19276,7 @@ # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -18855,8 +19284,10 @@ postinstall_cmds='$RANLIB $lib' fi ;; -aix4*) - test "$enable_shared" = yes && enable_static=no +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi ;; esac echo "$as_me:$LINENO: result: $enable_shared" >&5 @@ -18933,7 +19364,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -18959,6 +19390,16 @@ lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' fi ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_F77='-qnocommon' + lt_prog_compiler_wl_F77='-Wl,' + ;; + esac + ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being @@ -18970,7 +19411,7 @@ lt_prog_compiler_wl_F77='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -18994,12 +19435,19 @@ ;; linux*) - case $CC in + case $cc_basename in icc* | ecc*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-static' ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-fpic' + lt_prog_compiler_static_F77='-Bstatic' + ;; ccc*) lt_prog_compiler_wl_F77='-Wl,' # All Alpha code is PIC. @@ -19020,9 +19468,14 @@ ;; solaris*) - lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl_F77='-Qoption ld ';; + *) + lt_prog_compiler_wl_F77='-Wl,';; + esac ;; sunos4*) @@ -19044,6 +19497,11 @@ fi ;; + unicos*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_can_build_shared_F77=no + ;; + uts4*) lt_prog_compiler_pic_F77='-pic' lt_prog_compiler_static_F77='-Bstatic' @@ -19078,18 +19536,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:19084: $lt_compile\"" >&5) + (eval echo "\"\$as_me:19542: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:19088: \$? = $ac_status" >&5 + echo "$as_me:19546: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then lt_prog_compiler_pic_works_F77=yes fi fi @@ -19110,7 +19570,7 @@ fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_F77= @@ -19132,38 +19592,36 @@ mkdir out printf "$lt_simple_compile_test_code" > conftest.$ac_ext - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:19151: $lt_compile\"" >&5) + (eval echo "\"\$as_me:19604: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:19155: \$? = $ac_status" >&5 + echo "$as_me:19608: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp + $SED '/^$/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_F77=yes fi fi - chmod u+w . - $rm conftest* out/* - rmdir out + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* @@ -19234,6 +19692,16 @@ # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) @@ -19254,6 +19722,27 @@ # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_F77='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_F77= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) @@ -19291,7 +19780,7 @@ allow_undefined_flag_F77=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - archive_cmds_F77='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_F77=no fi @@ -19301,13 +19790,13 @@ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_F77='-L$libdir' - allow_undefined_flag_F77=no + allow_undefined_flag_F77=unsupported always_export_symbols_F77=no enable_shared_with_static_runtimes_F77=yes - export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -19316,19 +19805,51 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' else - ld_shlibs=no + ld_shlibs_F77=no + fi + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + link_all_deplibs_F77=no + else + ld_shlibs_F77=no fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -19346,8 +19867,8 @@ EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_F77=no fi @@ -19362,24 +19883,19 @@ *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_F77=no fi ;; esac - if test "$ld_shlibs_F77" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_F77='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_F77= - fi + if test "$ld_shlibs_F77" = no; then + runpath_var= + hardcode_libdir_flag_spec_F77= + export_dynamic_flag_spec_F77= + whole_archive_flag_spec_F77= fi else # PORTME fill in a description of your system's linker (not GNU ld) @@ -19413,9 +19929,20 @@ else export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi @@ -19432,7 +19959,7 @@ link_all_deplibs_F77=yes if test "$GCC" = yes; then - case $host_os in aix4.012|aix4.012.*) + case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -19453,6 +19980,9 @@ fi esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -19461,21 +19991,22 @@ shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' + shared_flag='${wl}-G' else - shared_flag='-qmkshrobj' + shared_flag='${wl}-bM:SRE' fi fi fi - # Let the compiler handle the export list. - always_export_symbols_F77=no + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_F77=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_F77='-berok' # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF program main end @@ -19489,8 +20020,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19517,14 +20047,13 @@ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_cmds_F77="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_F77="-z nodefs" - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF @@ -19541,8 +20070,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19579,8 +20107,8 @@ # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_F77=' ' archive_cmds_need_lc_F77=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -19593,7 +20121,7 @@ ld_shlibs_F77=no ;; - bsdi4*) + bsdi[45]*) export_dynamic_flag_spec_F77=-rdynamic ;; @@ -19603,68 +20131,68 @@ # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_F77=' ' - allow_undefined_flag_F77=no + allow_undefined_flag_F77=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext=".dll" + shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. - archive_cmds_F77='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_From_new_cmds_F77='true' # FIXME: Should let the user specify the lib program. old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' + fix_srcfile_path_F77='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes_F77=yes ;; darwin* | rhapsody*) - if test "$GXX" = yes ; then - archive_cmds_need_lc_F77=no - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag_F77='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_F77='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.012) - allow_undefined_flag_F77='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - allow_undefined_flag_F77='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_cmds_F77='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - else - archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' - fi - module_cmds_F77='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + archive_cmds_need_lc_F77=no hardcode_direct_F77=no hardcode_automatic_F77=yes hardcode_shlibpath_var_F77=unsupported - whole_archive_flag_spec_F77='-all_load $convenience' + whole_archive_flag_spec_F77='' link_all_deplibs_F77=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else - ld_shlibs_F77=no + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_F77=no + ;; + esac fi ;; @@ -19698,8 +20226,8 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds_F77='$CC -shared -o $lib $compiler_flags $libobjs $deplibs' + freebsd* | kfreebsd*-gnu | dragonfly*) + archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_F77='-R$libdir' hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no @@ -19707,7 +20235,7 @@ hpux9*) if test "$GCC" = yes; then - archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi @@ -19723,16 +20251,16 @@ hpux10* | hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) - archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ;; @@ -19742,7 +20270,7 @@ esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld_F77='+b $libdir' @@ -19775,7 +20303,7 @@ irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' @@ -19785,7 +20313,7 @@ link_all_deplibs_F77=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -19808,7 +20336,8 @@ hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_F77='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' export_dynamic_flag_spec_F77='${wl}-E' else @@ -19818,7 +20347,7 @@ hardcode_libdir_flag_spec_F77='-R$libdir' ;; *) - archive_cmds_F77='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ;; esac @@ -19829,14 +20358,14 @@ hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_minus_L_F77=yes allow_undefined_flag_F77=unsupported - archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def' + archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_F77='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag_F77=' -expect_unresolved \*' archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' @@ -19848,13 +20377,13 @@ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_F77='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' else allow_undefined_flag_F77=' -expect_unresolved \*' archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec_F77='-rpath $libdir' @@ -19873,10 +20402,12 @@ solaris*) no_undefined_flag_F77=' -z text' if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + wlarc='${wl}' + archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp' + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else + wlarc='' archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' @@ -19885,8 +20416,18 @@ hardcode_shlibpath_var_F77=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; + *) + whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; esac link_all_deplibs_F77=yes ;; @@ -19895,7 +20436,7 @@ if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -19955,9 +20496,9 @@ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) no_undefined_flag_F77='${wl}-z ${wl}text' if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var_F77=no @@ -20063,7 +20604,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext=".so" +shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -20073,7 +20614,20 @@ version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi need_lib_prefix=unknown hardcode_into_libs=no @@ -20138,7 +20692,7 @@ amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) @@ -20147,7 +20701,7 @@ shlibpath_var=LIBRARY_PATH ;; -bsdi4*) +bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -20163,7 +20717,7 @@ cygwin* | mingw* | pw32*) version_type=windows - shrext=".dll" + shrext_cmds=".dll" need_version=no need_lib_prefix=no @@ -20175,7 +20729,8 @@ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -20205,7 +20760,7 @@ ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; @@ -20228,7 +20783,7 @@ soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -20251,7 +20806,7 @@ dynamic_linker=no ;; -freebsd*-gnu*) +kfreebsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -20263,8 +20818,17 @@ dynamic_linker='GNU ld.so' ;; -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -20282,7 +20846,7 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - freebsd3.01* | freebsdelf3.01*) + freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; @@ -20309,9 +20873,9 @@ version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) - shrext='.so' + shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH @@ -20326,7 +20890,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) - shrext='.sl' + shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH @@ -20337,7 +20901,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) - shrext='.sl' + shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH @@ -20399,22 +20963,19 @@ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, @@ -20424,6 +20985,30 @@ dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + netbsd*) version_type=sunos need_lib_prefix=no @@ -20433,7 +21018,7 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi @@ -20462,7 +21047,11 @@ openbsd*) version_type=sunos need_lib_prefix=no - need_version=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH @@ -20482,7 +21071,7 @@ os2*) libname_spec='$name' - shrext=".dll" + shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' @@ -20584,8 +21173,8 @@ echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 hardcode_action_F77= if test -n "$hardcode_libdir_flag_spec_F77" || \ - test -n "$runpath_var F77" || \ - test "X$hardcode_automatic_F77"="Xyes" ; then + test -n "$runpath_var_F77" || \ + test "X$hardcode_automatic_F77" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_F77" != no && @@ -20661,7 +21250,8 @@ # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ @@ -20761,6 +21351,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -20791,7 +21387,7 @@ NM=$lt_NM # A symbol stripping program -STRIP=$STRIP +STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD @@ -20822,7 +21418,7 @@ libext="$libext" # Shared library suffix (normally ".so"). -shrext='$shrext' +shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" @@ -20837,7 +21433,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -21039,7 +21635,10 @@ # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. - test -f Makefile && make "$ltmain" + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi fi @@ -21072,7 +21671,7 @@ lt_simple_compile_test_code="class foo {}\n" # Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }\n' +lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' # ltmain only uses $CC for tagged configurations so make sure $CC is set. @@ -21083,19 +21682,41 @@ compiler=$CC +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${GCJ-"gcj"} compiler=$CC compiler_GCJ=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + # GCJ did not exist at the time GCC didn't implicitly link libc in. archive_cmds_need_lc_GCJ=no -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... +old_archive_cmds_GCJ=$old_archive_cmds + lt_prog_compiler_no_builtin_flag_GCJ= @@ -21118,18 +21739,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:21124: $lt_compile\"" >&5) + (eval echo "\"\$as_me:21745: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:21128: \$? = $ac_status" >&5 + echo "$as_me:21749: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi @@ -21206,7 +21829,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -21232,6 +21855,16 @@ lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' fi ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_GCJ='-qnocommon' + lt_prog_compiler_wl_GCJ='-Wl,' + ;; + esac + ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being @@ -21243,7 +21876,7 @@ lt_prog_compiler_wl_GCJ='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -21267,12 +21900,19 @@ ;; linux*) - case $CC in + case $cc_basename in icc* | ecc*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-static' ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-fpic' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; ccc*) lt_prog_compiler_wl_GCJ='-Wl,' # All Alpha code is PIC. @@ -21293,9 +21933,14 @@ ;; solaris*) - lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl_GCJ='-Qoption ld ';; + *) + lt_prog_compiler_wl_GCJ='-Wl,';; + esac ;; sunos4*) @@ -21317,6 +21962,11 @@ fi ;; + unicos*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_can_build_shared_GCJ=no + ;; + uts4*) lt_prog_compiler_pic_GCJ='-pic' lt_prog_compiler_static_GCJ='-Bstatic' @@ -21351,18 +22001,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:21357: $lt_compile\"" >&5) + (eval echo "\"\$as_me:22007: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:21361: \$? = $ac_status" >&5 + echo "$as_me:22011: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then lt_prog_compiler_pic_works_GCJ=yes fi fi @@ -21383,7 +22035,7 @@ fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_GCJ= @@ -21405,38 +22057,36 @@ mkdir out printf "$lt_simple_compile_test_code" > conftest.$ac_ext - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:21424: $lt_compile\"" >&5) + (eval echo "\"\$as_me:22069: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:21428: \$? = $ac_status" >&5 + echo "$as_me:22073: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp + $SED '/^$/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_GCJ=yes fi fi - chmod u+w . - $rm conftest* out/* - rmdir out + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* @@ -21507,6 +22157,16 @@ # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) @@ -21527,6 +22187,27 @@ # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_GCJ= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) @@ -21564,7 +22245,7 @@ allow_undefined_flag_GCJ=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - archive_cmds_GCJ='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_GCJ=no fi @@ -21574,13 +22255,13 @@ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_GCJ='-L$libdir' - allow_undefined_flag_GCJ=no + allow_undefined_flag_GCJ=unsupported always_export_symbols_GCJ=no enable_shared_with_static_runtimes_GCJ=yes - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -21589,19 +22270,51 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' else - ld_shlibs=no + ld_shlibs_GCJ=no + fi + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + link_all_deplibs_GCJ=no + else + ld_shlibs_GCJ=no fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -21619,8 +22332,8 @@ EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_GCJ=no fi @@ -21635,24 +22348,19 @@ *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_GCJ=no fi ;; esac - if test "$ld_shlibs_GCJ" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_GCJ= - fi + if test "$ld_shlibs_GCJ" = no; then + runpath_var= + hardcode_libdir_flag_spec_GCJ= + export_dynamic_flag_spec_GCJ= + whole_archive_flag_spec_GCJ= fi else # PORTME fill in a description of your system's linker (not GNU ld) @@ -21686,9 +22394,20 @@ else export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi @@ -21705,7 +22424,7 @@ link_all_deplibs_GCJ=yes if test "$GCC" = yes; then - case $host_os in aix4.012|aix4.012.*) + case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -21726,6 +22445,9 @@ fi esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -21734,21 +22456,22 @@ shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' + shared_flag='${wl}-G' else - shared_flag='-qmkshrobj' + shared_flag='${wl}-bM:SRE' fi fi fi - # Let the compiler handle the export list. - always_export_symbols_GCJ=no + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_GCJ=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_GCJ='-berok' # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -21772,8 +22495,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -21800,14 +22522,13 @@ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_cmds_GCJ="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_GCJ="-z nodefs" - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF @@ -21834,8 +22555,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -21872,8 +22592,8 @@ # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_GCJ=' ' archive_cmds_need_lc_GCJ=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -21886,7 +22606,7 @@ ld_shlibs_GCJ=no ;; - bsdi4*) + bsdi[45]*) export_dynamic_flag_spec_GCJ=-rdynamic ;; @@ -21896,68 +22616,68 @@ # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_GCJ=' ' - allow_undefined_flag_GCJ=no + allow_undefined_flag_GCJ=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext=".dll" + shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. - archive_cmds_GCJ='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_From_new_cmds_GCJ='true' # FIXME: Should let the user specify the lib program. old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' + fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes_GCJ=yes ;; darwin* | rhapsody*) - if test "$GXX" = yes ; then - archive_cmds_need_lc_GCJ=no - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag_GCJ='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_GCJ='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.012) - allow_undefined_flag_GCJ='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - allow_undefined_flag_GCJ='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_cmds_GCJ='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - else - archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' - fi - module_cmds_GCJ='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + archive_cmds_need_lc_GCJ=no hardcode_direct_GCJ=no hardcode_automatic_GCJ=yes hardcode_shlibpath_var_GCJ=unsupported - whole_archive_flag_spec_GCJ='-all_load $convenience' + whole_archive_flag_spec_GCJ='' link_all_deplibs_GCJ=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else - ld_shlibs_GCJ=no + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_GCJ=no + ;; + esac fi ;; @@ -21991,8 +22711,8 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds_GCJ='$CC -shared -o $lib $compiler_flags $libobjs $deplibs' + freebsd* | kfreebsd*-gnu | dragonfly*) + archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_GCJ='-R$libdir' hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no @@ -22000,7 +22720,7 @@ hpux9*) if test "$GCC" = yes; then - archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi @@ -22016,16 +22736,16 @@ hpux10* | hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) - archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ;; @@ -22035,7 +22755,7 @@ esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' @@ -22068,7 +22788,7 @@ irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' @@ -22078,7 +22798,7 @@ link_all_deplibs_GCJ=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -22101,7 +22821,8 @@ hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' export_dynamic_flag_spec_GCJ='${wl}-E' else @@ -22111,7 +22832,7 @@ hardcode_libdir_flag_spec_GCJ='-R$libdir' ;; *) - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ;; esac @@ -22122,14 +22843,14 @@ hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_minus_L_GCJ=yes allow_undefined_flag_GCJ=unsupported - archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def' + archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag_GCJ=' -expect_unresolved \*' archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' @@ -22141,13 +22862,13 @@ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' else allow_undefined_flag_GCJ=' -expect_unresolved \*' archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec_GCJ='-rpath $libdir' @@ -22166,10 +22887,12 @@ solaris*) no_undefined_flag_GCJ=' -z text' if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + wlarc='${wl}' + archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp' + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else + wlarc='' archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' @@ -22178,8 +22901,18 @@ hardcode_shlibpath_var_GCJ=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; + *) + whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; esac link_all_deplibs_GCJ=yes ;; @@ -22188,7 +22921,7 @@ if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -22248,9 +22981,9 @@ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) no_undefined_flag_GCJ='${wl}-z ${wl}text' if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var_GCJ=no @@ -22356,7 +23089,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext=".so" +shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -22366,7 +23099,20 @@ version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi need_lib_prefix=unknown hardcode_into_libs=no @@ -22431,7 +23177,7 @@ amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) @@ -22440,7 +23186,7 @@ shlibpath_var=LIBRARY_PATH ;; -bsdi4*) +bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -22456,7 +23202,7 @@ cygwin* | mingw* | pw32*) version_type=windows - shrext=".dll" + shrext_cmds=".dll" need_version=no need_lib_prefix=no @@ -22468,7 +23214,8 @@ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -22498,7 +23245,7 @@ ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; @@ -22521,7 +23268,7 @@ soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -22544,7 +23291,7 @@ dynamic_linker=no ;; -freebsd*-gnu*) +kfreebsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -22556,8 +23303,17 @@ dynamic_linker='GNU ld.so' ;; -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -22575,7 +23331,7 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - freebsd3.01* | freebsdelf3.01*) + freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; @@ -22602,9 +23358,9 @@ version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) - shrext='.so' + shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH @@ -22619,7 +23375,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) - shrext='.sl' + shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH @@ -22630,7 +23386,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) - shrext='.sl' + shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH @@ -22692,22 +23448,19 @@ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, @@ -22717,6 +23470,30 @@ dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + netbsd*) version_type=sunos need_lib_prefix=no @@ -22726,7 +23503,7 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi @@ -22755,7 +23532,11 @@ openbsd*) version_type=sunos need_lib_prefix=no - need_version=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH @@ -22775,7 +23556,7 @@ os2*) libname_spec='$name' - shrext=".dll" + shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' @@ -22877,8 +23658,8 @@ echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 hardcode_action_GCJ= if test -n "$hardcode_libdir_flag_spec_GCJ" || \ - test -n "$runpath_var GCJ" || \ - test "X$hardcode_automatic_GCJ"="Xyes" ; then + test -n "$runpath_var_GCJ" || \ + test "X$hardcode_automatic_GCJ" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_GCJ" != no && @@ -23004,8 +23785,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -23108,8 +23888,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -23174,8 +23953,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -23268,8 +24046,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -23334,8 +24111,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -23401,8 +24177,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -23468,8 +24243,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -23544,7 +24318,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; @@ -23642,7 +24416,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; @@ -23759,7 +24533,8 @@ # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ @@ -23859,6 +24634,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -23889,7 +24670,7 @@ NM=$lt_NM # A symbol stripping program -STRIP=$STRIP +STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD @@ -23920,7 +24701,7 @@ libext="$libext" # Shared library suffix (normally ".so"). -shrext='$shrext' +shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" @@ -23935,7 +24716,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -24137,7 +24918,10 @@ # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. - test -f Makefile && make "$ltmain" + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi fi @@ -24180,11 +24964,35 @@ compiler=$CC +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${RC-"windres"} compiler=$CC compiler_RC=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + lt_cv_prog_compiler_c_o_RC=yes # The else clause should only fire when bootstrapping the @@ -24200,7 +25008,8 @@ # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ @@ -24300,6 +25109,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -24330,7 +25145,7 @@ NM=$lt_NM # A symbol stripping program -STRIP=$STRIP +STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD @@ -24361,7 +25176,7 @@ libext="$libext" # Shared library suffix (normally ".so"). -shrext='$shrext' +shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" @@ -24376,7 +25191,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -24578,7 +25393,10 @@ # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. - test -f Makefile && make "$ltmain" + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi fi @@ -24625,7 +25443,7 @@ LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' +LIBTOOL='$(SHELL) $(top_builddir)/libtool' # Prevent multiple expansion @@ -24755,8 +25573,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -24818,8 +25635,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -24859,8 +25675,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -24916,8 +25731,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -24957,8 +25771,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25022,8 +25835,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25054,10 +25866,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -25169,8 +25979,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25232,8 +26041,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25273,8 +26081,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25330,8 +26137,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25371,8 +26177,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25436,8 +26241,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25468,10 +26272,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -25583,8 +26385,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25646,8 +26447,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25687,8 +26487,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25744,8 +26543,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25785,8 +26583,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25850,8 +26647,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -25882,10 +26678,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -25997,8 +26791,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26060,8 +26853,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26101,8 +26893,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26158,8 +26949,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26199,8 +26989,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26264,8 +27053,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26296,10 +27084,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -26411,8 +27197,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26474,8 +27259,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26515,8 +27299,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26572,8 +27355,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26613,8 +27395,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26678,8 +27459,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26710,10 +27490,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -26894,8 +27672,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -26972,8 +27749,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -27050,8 +27826,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -27185,8 +27960,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -27725,8 +28499,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -27830,8 +28603,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -27945,8 +28717,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28049,8 +28820,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28140,8 +28910,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28202,8 +28971,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28271,8 +29039,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28338,8 +29105,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28432,8 +29198,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28511,8 +29276,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28596,8 +29360,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28665,8 +29428,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28761,8 +29523,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28826,8 +29587,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28922,8 +29682,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -28987,8 +29746,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -29084,8 +29842,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -29149,8 +29906,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -29247,8 +30003,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -29313,8 +30068,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -29382,8 +30136,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -29534,8 +30287,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -29690,8 +30442,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -29756,8 +30507,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -29904,8 +30654,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30060,8 +30809,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30153,8 +30901,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30258,8 +31005,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30359,8 +31105,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30434,8 +31179,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30498,8 +31242,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30561,8 +31304,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30602,8 +31344,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30659,8 +31400,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30700,8 +31440,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30765,8 +31504,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30797,10 +31535,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -30911,8 +31647,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -30974,8 +31709,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31015,8 +31749,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31072,8 +31805,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31113,8 +31845,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31178,8 +31909,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31210,10 +31940,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -31324,8 +32052,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31387,8 +32114,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31428,8 +32154,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31485,8 +32210,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31526,8 +32250,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31591,8 +32314,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31623,10 +32345,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -31737,8 +32457,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31800,8 +32519,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31841,8 +32559,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31898,8 +32615,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -31939,8 +32655,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32004,8 +32719,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32036,10 +32750,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -32158,8 +32870,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32230,8 +32941,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32301,8 +33011,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32364,8 +33073,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32405,8 +33113,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32462,8 +33169,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32503,8 +33209,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32568,8 +33273,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32600,10 +33304,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -32715,8 +33417,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32778,8 +33479,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32819,8 +33519,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32876,8 +33575,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32917,8 +33615,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -32982,8 +33679,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -33014,10 +33710,8 @@ esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF @@ -33128,8 +33822,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -33199,8 +33892,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -33380,8 +34072,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -33490,8 +34181,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -33715,8 +34405,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -33939,8 +34628,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -34016,8 +34704,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -34240,8 +34927,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -34316,8 +35002,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -34377,8 +35062,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -34461,8 +35145,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -34555,8 +35238,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -34730,8 +35412,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -34829,8 +35510,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -34923,8 +35603,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -35007,8 +35686,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -35061,7 +35739,7 @@ do for j in jpeglib.h; do - echo "configure: 35064: $i/$j" >&5 + echo "configure: 35742: $i/$j" >&5 if test -r "$i/$j"; then echo "taking that" >&5 jpeg_incdir=$i @@ -35359,7 +36037,7 @@ do for j in $kde_qt_header; do - echo "configure: 35362: $i/$j" >&5 + echo "configure: 36040: $i/$j" >&5 if test -r "$i/$j"; then echo "taking that" >&5 qt_incdir=$i @@ -36036,8 +36714,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -36215,8 +36892,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -36245,8 +36921,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -36316,8 +36991,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -36369,8 +37043,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -36441,8 +37114,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -36494,8 +37166,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -36644,6 +37315,13 @@ LTLIBOBJS=$ac_ltlibobjs +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 @@ -37310,17 +37988,17 @@ s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t +s,@AMTAR@,$AMTAR,;t t s,@install_sh@,$install_sh,;t t s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t -s,@mkdir_p@,$mkdir_p,;t t s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@am__leading_dot@,$am__leading_dot,;t t -s,@AMTAR@,$AMTAR,;t t -s,@am__tar@,$am__tar,;t t -s,@am__untar@,$am__untar,;t t +s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t +s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t +s,@MAINT@,$MAINT,;t t s,@CC@,$CC,;t t s,@CFLAGS@,$CFLAGS,;t t s,@LDFLAGS@,$LDFLAGS,;t t @@ -37611,11 +38289,6 @@ *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ @@ -37654,6 +38327,12 @@ fi;; esac done` || { (exit 1); exit 1; } + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub @@ -38067,21 +38746,27 @@ else continue fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue + # Extract the definition of DEP_FILES from the Makefile without + # running `make'. + DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + U=`sed -n -e '/^U = / s///p' < "$mf"` + test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" + # We invoke sed twice because it is the simplest approach to + # changing $(DEPDIR) to its actual value in the expansion. + for file in `sed -n -e ' + /^DEP_FILES = .*\\\\$/ { + s/^DEP_FILES = // + :loop + s/\\\\$// + p + n + /\\\\$/ b loop + p + } + /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue --- qtparted-0.4.5.orig/src/qp_devlist.cpp +++ qtparted-0.4.5/src/qp_devlist.cpp @@ -248,7 +248,7 @@ // Workaround for parted detecting CD-ROMs as harddisks // FIXME remove if/when parted gets fixed QString p(dev->path); - if(!p.startsWith("/dev/sd") && (p.contains("/dev/scd") || p.contains("/dev/sr") || access("/proc/ide/" + p.section('/', 2, 2) + "/cache", R_OK))) + if(!p.startsWith("/dev/sd") && (p.contains("/dev/scd") || p.contains("/dev/sr"))) continue; QP_Device *device = new QP_Device(_settings); --- qtparted-0.4.5.orig/src/Makefile.in +++ qtparted-0.4.5/src/Makefile.in @@ -1,244 +1,1180 @@ -# Makefile.in generated by unsermake -#################################### +# Makefile.in generated by automake 1.7.9 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 1.3 $ +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. -top_builddir = .. -top_srcdir = @top_srcdir@ -srcdir = @srcdir@ -.FORWARDS: all install install-data install-exec clean check force-reedit +@SET_MAKE@ -all: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) all - -install: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install - -install-data: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-data - -install-exec: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-exec - -clean: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) clean - -check: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) check +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. -force-reedit: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) force-reedit +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFAULT_DEBUG_LEVEL = @DEFAULT_DEBUG_LEVEL@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +FILESYS_EXT3FS_SUPPORT = @FILESYS_EXT3FS_SUPPORT@ +FILESYS_JFS_SUPPORT = @FILESYS_JFS_SUPPORT@ +FILESYS_NTFS_SUPPORT = @FILESYS_NTFS_SUPPORT@ +FILESYS_REISERFS_SUPPORT = @FILESYS_REISERFS_SUPPORT@ +FILESYS_XFS_SUPPORT = @FILESYS_XFS_SUPPORT@ +FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@ +FSPATH_MKFSEXT3 = @FSPATH_MKFSEXT3@ +FSPATH_MKFSJFS = @FSPATH_MKFSJFS@ +FSPATH_MKFSXFS = @FSPATH_MKFSXFS@ +FSPATH_MKNTFS = @FSPATH_MKNTFS@ +FSPATH_MOUNT = @FSPATH_MOUNT@ +FSPATH_NTFSRESIZE = @FSPATH_NTFSRESIZE@ +FSPATH_UMOUNT = @FSPATH_UMOUNT@ +FSPATH_XFS_GROWFS = @FSPATH_XFS_GROWFS@ +HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@ +HOMEPAGE = @HOMEPAGE@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KDE_CHECK_PLUGIN = @KDE_CHECK_PLUGIN@ +KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ +KDE_MT_LIBS = @KDE_MT_LIBS@ +KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@ +KDE_PLUGIN = @KDE_PLUGIN@ +KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ +KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ +KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ +KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ +KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@ +KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@ +LDFLAGS = @LDFLAGS@ +LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@ +LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@ +LIBCOMPAT = @LIBCOMPAT@ +LIBCRYPT = @LIBCRYPT@ +LIBDL = @LIBDL@ +LIBJPEG = @LIBJPEG@ +LIBOBJS = @LIBOBJS@ +LIBPNG = @LIBPNG@ +LIBPTHREAD = @LIBPTHREAD@ +LIBRESOLV = @LIBRESOLV@ +LIBS = @LIBS@ +LIBSM = @LIBSM@ +LIBSOCKET = @LIBSOCKET@ +LIBTOOL = @LIBTOOL@ +LIBUCB = @LIBUCB@ +LIBUTIL = @LIBUTIL@ +LIBZ = @LIBZ@ +LIB_POLL = @LIB_POLL@ +LIB_QPE = @LIB_QPE@ +LIB_QT = @LIB_QT@ +LIB_X11 = @LIB_X11@ +LIB_XEXT = @LIB_XEXT@ +LIB_XRENDER = @LIB_XRENDER@ +LN_S = @LN_S@ +LOGDIR = @LOGDIR@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ +MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ +MAKEINFO = @MAKEINFO@ +MOC = @MOC@ +NOOPT_CFLAGS = @NOOPT_CFLAGS@ +NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ +OBJEXT = @OBJEXT@ +OS = @OS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_QTDIR = @PATH_QTDIR@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +QTE_NORTTI = @QTE_NORTTI@ +QTPARTED_LDFLAGS = @QTPARTED_LDFLAGS@ +QTPARTED_LIBS = @QTPARTED_LIBS@ +QTPARTED_PREFIX = @QTPARTED_PREFIX@ +QTPATH_LRELEASE = @QTPATH_LRELEASE@ +QT_INCLUDES = @QT_INCLUDES@ +QT_LDFLAGS = @QT_LDFLAGS@ +RANLIB = @RANLIB@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +UIC = @UIC@ +UIC_TR = @UIC_TR@ +USER_INCLUDES = @USER_INCLUDES@ +USER_LDFLAGS = @USER_LDFLAGS@ +USE_EXCEPTIONS = @USE_EXCEPTIONS@ +USE_RTTI = @USE_RTTI@ +USE_THREADS = @USE_THREADS@ +VERSION = @VERSION@ +WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_INCLUDES = @X_INCLUDES@ +X_LDFLAGS = @X_LDFLAGS@ +X_PRE_LIBS = @X_PRE_LIBS@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +ac_ct_RANLIB = @ac_ct_RANLIB@ +ac_ct_STRIP = @ac_ct_STRIP@ +all_includes = @all_includes@ +all_libraries = @all_libraries@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +include_x11_FALSE = @include_x11_FALSE@ +include_x11_TRUE = @include_x11_TRUE@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_qtver = @kde_qtver@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +qt_includes = @qt_includes@ +qt_libraries = @qt_libraries@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@ +unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@ +x_includes = @x_includes@ +x_libraries = @x_libraries@ +sbin_PROGRAMS = qtparted + +INCLUDES = -I. -I$(qt_includes) -I$(all_includes) +KDE_OPTIONS = qtonly + +#>- qtparted_METASOURCES = AUTO + +#>- qtparted_SOURCES = qp_ui_config.ui \ +#>- qp_ui_create.ui \ +#>- qp_ui_format.ui \ +#>- qp_ui_progress.ui \ +#>- qp_ui_resize.ui \ +#>- qp_ui_devprop.ui \ +#>- main.cpp \ +#>- qp_dlgabout.cpp \ +#>- qp_dlgconfig.cpp \ +#>- qp_dlgcreate.cpp \ +#>- qp_dlgformat.cpp \ +#>- qp_dlgresize.cpp \ +#>- qp_dlgprogress.cpp \ +#>- qp_dlgdevprop.cpp \ +#>- qp_drivelist.cpp \ +#>- qp_devlist.cpp \ +#>- qp_libparted.cpp \ +#>- qp_partlist.cpp \ +#>- qp_actlist.cpp \ +#>- qp_extended.cpp \ +#>- qp_listchart.cpp \ +#>- qp_partition.cpp \ +#>- qp_partwidget.cpp \ +#>- qp_diskview.cpp \ +#>- qp_window.cpp \ +#>- qp_combospin.cpp \ +#>- qp_exttools.cpp \ +#>- qp_listview.cpp \ +#>- qp_settings.cpp \ +#>- qp_common.cpp \ +#>- qp_filesystem.cpp \ +#>- qp_navview.cpp \ +#>- qp_fswrap.cpp \ +#>- qp_sizepart.cpp \ +#>- qp_spinbox.cpp \ +#>- qp_debug.cpp \ +#>- statistics.cpp +#>+ 37 +qtparted_SOURCES= \ + \ + \ + \ + \ + \ + main.cpp \ + qp_dlgabout.cpp \ + qp_dlgconfig.cpp \ + qp_dlgcreate.cpp \ + qp_dlgformat.cpp \ + qp_dlgresize.cpp \ + qp_dlgprogress.cpp \ + qp_dlgdevprop.cpp \ + qp_drivelist.cpp \ + qp_devlist.cpp \ + qp_libparted.cpp \ + qp_partlist.cpp \ + qp_actlist.cpp \ + qp_extended.cpp \ + qp_listchart.cpp \ + qp_partition.cpp \ + qp_partwidget.cpp \ + qp_diskview.cpp \ + qp_window.cpp \ + qp_combospin.cpp \ + qp_exttools.cpp \ + qp_listview.cpp \ + qp_settings.cpp \ + qp_common.cpp \ + qp_filesystem.cpp \ + qp_navview.cpp \ + qp_fswrap.cpp \ + qp_sizepart.cpp \ + qp_spinbox.cpp \ + qp_debug.cpp \ + statistics.cpp qp_ui_config.cpp qp_ui_create.cpp qp_ui_format.cpp qp_ui_progress.cpp qp_ui_resize.cpp qp_ui_devprop.cpp + + +noinst_HEADERS = qtparted.h \ + qp_dlgabout.h \ + qp_dlgconfig.h \ + qp_dlgcreate.h \ + qp_dlgformat.h \ + qp_dlgresize.h \ + qp_dlgprogress.h \ + qp_dlgdevprop.h \ + qp_drivelist.h \ + qp_devlist.h \ + qp_libparted.h \ + qp_partlist.h \ + qp_actlist.h \ + qp_extended.h \ + qp_listchart.h \ + qp_partition.h \ + qp_partwidget.h \ + qp_diskview.h \ + qp_window.h \ + qp_combospin.h \ + qp_exttools.h \ + qp_listview.h \ + qp_settings.h \ + qp_common.h \ + qp_filesystem.h \ + qp_navview.h \ + qp_fswrap.h \ + qp_sizepart.h \ + qp_spinbox.h \ + statistics.h + + +qtparted_LDFLAGS = @QTPARTED_LDFLAGS@ @QTPARTED_LIBS@ -L$(qt_libraries) $(all_libraries) $(LIBS) + +qtparted_LDADD = -ldl -lparted $(LIB_QPE) $(LIB_QT) + +DISTCLEANFILES = $(piguicqt_METASOURCES) +MAINTAINERCLEANFILES = Makefile.in +subdir = src +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = qp_options.h +sbin_PROGRAMS = qtparted$(EXEEXT) +PROGRAMS = $(sbin_PROGRAMS) + +am_qtparted_OBJECTS = main.$(OBJEXT) qp_dlgabout.$(OBJEXT) \ + qp_dlgconfig.$(OBJEXT) qp_dlgcreate.$(OBJEXT) \ + qp_dlgformat.$(OBJEXT) qp_dlgresize.$(OBJEXT) \ + qp_dlgprogress.$(OBJEXT) qp_dlgdevprop.$(OBJEXT) \ + qp_drivelist.$(OBJEXT) qp_devlist.$(OBJEXT) \ + qp_libparted.$(OBJEXT) qp_partlist.$(OBJEXT) \ + qp_actlist.$(OBJEXT) qp_extended.$(OBJEXT) \ + qp_listchart.$(OBJEXT) qp_partition.$(OBJEXT) \ + qp_partwidget.$(OBJEXT) qp_diskview.$(OBJEXT) \ + qp_window.$(OBJEXT) qp_combospin.$(OBJEXT) \ + qp_exttools.$(OBJEXT) qp_listview.$(OBJEXT) \ + qp_settings.$(OBJEXT) qp_common.$(OBJEXT) \ + qp_filesystem.$(OBJEXT) qp_navview.$(OBJEXT) \ + qp_fswrap.$(OBJEXT) qp_sizepart.$(OBJEXT) qp_spinbox.$(OBJEXT) \ + qp_debug.$(OBJEXT) statistics.$(OBJEXT) +#>- qtparted_OBJECTS = $(am_qtparted_OBJECTS) +#>+ 19 +qtparted_final_OBJECTS = qtparted.all_cpp.o +qtparted_nofinal_OBJECTS = main.$(OBJEXT) qp_dlgabout.$(OBJEXT) \ + qp_dlgconfig.$(OBJEXT) qp_dlgcreate.$(OBJEXT) \ + qp_dlgformat.$(OBJEXT) qp_dlgresize.$(OBJEXT) \ + qp_dlgprogress.$(OBJEXT) qp_dlgdevprop.$(OBJEXT) \ + qp_drivelist.$(OBJEXT) qp_devlist.$(OBJEXT) \ + qp_libparted.$(OBJEXT) qp_partlist.$(OBJEXT) \ + qp_actlist.$(OBJEXT) qp_extended.$(OBJEXT) \ + qp_listchart.$(OBJEXT) qp_partition.$(OBJEXT) \ + qp_partwidget.$(OBJEXT) qp_diskview.$(OBJEXT) \ + qp_window.$(OBJEXT) qp_combospin.$(OBJEXT) \ + qp_exttools.$(OBJEXT) qp_listview.$(OBJEXT) \ + qp_settings.$(OBJEXT) qp_common.$(OBJEXT) \ + qp_filesystem.$(OBJEXT) qp_navview.$(OBJEXT) \ + qp_fswrap.$(OBJEXT) qp_sizepart.$(OBJEXT) qp_spinbox.$(OBJEXT) \ + qp_debug.$(OBJEXT) statistics.$(OBJEXT) qp_ui_config.$(OBJEXT) qp_ui_create.$(OBJEXT) qp_ui_format.$(OBJEXT) qp_ui_progress.$(OBJEXT) qp_ui_resize.$(OBJEXT) qp_ui_devprop.$(OBJEXT)\ +qp_listchart.moc.o qp_libparted.moc.o qp_drivelist.moc.o qp_partwidget.moc.o qp_settings.moc.o qp_diskview.moc.o qp_dlgconfig.moc.o qp_dlgprogress.moc.o qp_dlgabout.moc.o qp_navview.moc.o qp_dlgcreate.moc.o qp_partition.moc.o qp_sizepart.moc.o qp_partlist.moc.o qp_dlgresize.moc.o qp_dlgdevprop.moc.o qp_window.moc.o qp_fswrap.moc.o qp_spinbox.moc.o qp_combospin.moc.o qp_dlgformat.moc.o qp_listview.moc.o qp_actlist.moc.o qp_extended.moc.o +@KDE_USE_FINAL_FALSE@qtparted_OBJECTS = $(qtparted_nofinal_OBJECTS) +@KDE_USE_FINAL_TRUE@qtparted_OBJECTS = $(qtparted_final_OBJECTS) +qtparted_DEPENDENCIES = + +DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +#>- @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/main.Po ./$(DEPDIR)/qp_actlist.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_combospin.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_common.Po ./$(DEPDIR)/qp_debug.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_devlist.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_diskview.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgabout.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgconfig.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgcreate.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgdevprop.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgformat.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgprogress.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgresize.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_drivelist.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_extended.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_exttools.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_filesystem.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_fswrap.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_libparted.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_listchart.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_listview.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_navview.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_partition.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_partlist.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_partwidget.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_settings.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_sizepart.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/qp_spinbox.Po ./$(DEPDIR)/qp_window.Po \ +#>- @AMDEP_TRUE@ ./$(DEPDIR)/statistics.Po +#>+ 56 +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@DEP_FILES = $(DEPDIR)/qp_ui_config.P $(DEPDIR)/qp_ui_create.P $(DEPDIR)/qp_ui_format.P $(DEPDIR)/qp_ui_progress.P $(DEPDIR)/qp_ui_resize.P $(DEPDIR)/qp_ui_devprop.P $(DEPDIR)/qp_listchart.moc.P $(DEPDIR)/qp_libparted.moc.P $(DEPDIR)/qp_drivelist.moc.P $(DEPDIR)/qp_partwidget.moc.P $(DEPDIR)/qp_settings.moc.P $(DEPDIR)/qp_diskview.moc.P $(DEPDIR)/qp_dlgconfig.moc.P $(DEPDIR)/qp_dlgprogress.moc.P $(DEPDIR)/qp_dlgabout.moc.P $(DEPDIR)/qp_navview.moc.P $(DEPDIR)/qp_dlgcreate.moc.P $(DEPDIR)/qp_partition.moc.P $(DEPDIR)/qp_sizepart.moc.P $(DEPDIR)/qp_partlist.moc.P $(DEPDIR)/qp_dlgresize.moc.P $(DEPDIR)/qp_dlgdevprop.moc.P $(DEPDIR)/qp_window.moc.P $(DEPDIR)/qp_fswrap.moc.P $(DEPDIR)/qp_spinbox.moc.P $(DEPDIR)/qp_combospin.moc.P $(DEPDIR)/qp_dlgformat.moc.P $(DEPDIR)/qp_listview.moc.P $(DEPDIR)/qp_actlist.moc.P $(DEPDIR)/qp_extended.moc.P $(DEPDIR)/qtparted.all_cpp.P ./$(DEPDIR)/main.Po ./$(DEPDIR)/qp_actlist.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_combospin.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_common.Po ./$(DEPDIR)/qp_debug.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_devlist.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_diskview.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgabout.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgconfig.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgcreate.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgdevprop.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgformat.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgprogress.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgresize.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_drivelist.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_extended.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_exttools.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_filesystem.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_fswrap.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_libparted.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_listchart.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_listview.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_navview.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_partition.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_partlist.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_partwidget.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_settings.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_sizepart.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_spinbox.Po ./$(DEPDIR)/qp_window.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_TRUE@ @AMDEP_TRUE@ ./$(DEPDIR)/statistics.Po +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@DEP_FILES = $(DEPDIR)/qp_ui_config.P $(DEPDIR)/qp_ui_create.P $(DEPDIR)/qp_ui_format.P $(DEPDIR)/qp_ui_progress.P $(DEPDIR)/qp_ui_resize.P $(DEPDIR)/qp_ui_devprop.P $(DEPDIR)/qp_listchart.moc.P $(DEPDIR)/qp_libparted.moc.P $(DEPDIR)/qp_drivelist.moc.P $(DEPDIR)/qp_partwidget.moc.P $(DEPDIR)/qp_settings.moc.P $(DEPDIR)/qp_diskview.moc.P $(DEPDIR)/qp_dlgconfig.moc.P $(DEPDIR)/qp_dlgprogress.moc.P $(DEPDIR)/qp_dlgabout.moc.P $(DEPDIR)/qp_navview.moc.P $(DEPDIR)/qp_dlgcreate.moc.P $(DEPDIR)/qp_partition.moc.P $(DEPDIR)/qp_sizepart.moc.P $(DEPDIR)/qp_partlist.moc.P $(DEPDIR)/qp_dlgresize.moc.P $(DEPDIR)/qp_dlgdevprop.moc.P $(DEPDIR)/qp_window.moc.P $(DEPDIR)/qp_fswrap.moc.P $(DEPDIR)/qp_spinbox.moc.P $(DEPDIR)/qp_combospin.moc.P $(DEPDIR)/qp_dlgformat.moc.P $(DEPDIR)/qp_listview.moc.P $(DEPDIR)/qp_actlist.moc.P $(DEPDIR)/qp_extended.moc.P ./$(DEPDIR)/main.Po ./$(DEPDIR)/qp_actlist.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_combospin.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_common.Po ./$(DEPDIR)/qp_debug.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_devlist.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_diskview.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgabout.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgconfig.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgcreate.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgdevprop.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgformat.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgprogress.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_dlgresize.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_drivelist.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_extended.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_exttools.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_filesystem.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_fswrap.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_libparted.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_listchart.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_listview.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_navview.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_partition.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_partlist.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_partwidget.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_settings.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_sizepart.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/qp_spinbox.Po ./$(DEPDIR)/qp_window.Po \ +@AMDEP_TRUE@@KDE_USE_FINAL_FALSE@ @AMDEP_TRUE@ ./$(DEPDIR)/statistics.Po +#>- CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +#>- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +#>+ 2 +CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) +#>- LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ +#>- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ +#>- $(AM_CXXFLAGS) $(CXXFLAGS) +#>+ 3 +LTCXXCOMPILE = $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CXXFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) +CXXLD = $(CXX) +#>- CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ +#>- $(AM_LDFLAGS) $(LDFLAGS) -o $@ +#>+ 2 +CXXLINK = $(LIBTOOL) --mode=link --tag=CXX $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +DIST_SOURCES = $(qtparted_SOURCES) +HEADERS = $(noinst_HEADERS) + +DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.in Makefile.am \ + qp_options.h.in +SOURCES = $(qtparted_SOURCES) + +#>- all: all-am +#>+ 1 +all: docs-am all-am + +.SUFFIXES: +.SUFFIXES: .cpp .lo .o .obj +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu src/Makefile +#>+ 3 + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu src/Makefile + cd $(top_srcdir) && perl admin/am_edit src/Makefile.in +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +qp_options.h: $(top_builddir)/config.status qp_options.h.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) +install-sbinPROGRAMS: $(sbin_PROGRAMS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(sbindir) + @list='$(sbin_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + || test -f $$p1 \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) $$p $(DESTDIR)$(sbindir)/$$f"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) $$p $(DESTDIR)$(sbindir)/$$f || exit 1; \ + else :; fi; \ + done + +uninstall-sbinPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(sbin_PROGRAMS)'; for p in $$list; do \ + f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " rm -f $(DESTDIR)$(sbindir)/$$f"; \ + rm -f $(DESTDIR)$(sbindir)/$$f; \ + done + +clean-sbinPROGRAMS: + @list='$(sbin_PROGRAMS)'; for p in $$list; do \ + f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f $$p $$f"; \ + rm -f $$p $$f ; \ + done +qtparted$(EXEEXT): $(qtparted_OBJECTS) $(qtparted_DEPENDENCIES) + @rm -f qtparted$(EXEEXT) + $(CXXLINK) $(qtparted_LDFLAGS) $(qtparted_OBJECTS) $(qtparted_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) core *.core + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_actlist.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_combospin.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_common.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_debug.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_devlist.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_diskview.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_dlgabout.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_dlgconfig.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_dlgcreate.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_dlgdevprop.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_dlgformat.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_dlgprogress.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_dlgresize.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_drivelist.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_extended.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_exttools.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_filesystem.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_fswrap.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_libparted.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_listchart.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_listview.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_navview.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_partition.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_partlist.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_partwidget.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_settings.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_sizepart.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_spinbox.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qp_window.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/statistics.Po@am__quote@ + +.cpp.o: +@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ +@am__fastdepCXX_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \ +@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ +@am__fastdepCXX_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ +@am__fastdepCXX_TRUE@ fi +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< + +.cpp.obj: +@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ +@am__fastdepCXX_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \ +@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ +@am__fastdepCXX_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ +@am__fastdepCXX_TRUE@ fi +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` + +.cpp.lo: +@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ +@am__fastdepCXX_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \ +@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \ +@am__fastdepCXX_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ +@am__fastdepCXX_TRUE@ fi +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: + +ETAGS = etags +ETAGSFLAGS = + +CTAGS = ctags +CTAGSFLAGS = + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$tags$$unique" \ + || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique + +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) + +top_distdir = .. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) $(HEADERS) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(sbindir) +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +#>- clean: clean-am +#>+ 1 +clean: kde-rpo-clean clean-am + +#>- clean-am: clean-generic clean-libtool clean-sbinPROGRAMS mostlyclean-am +#>+ 1 +clean-am: clean-metasources clean-ui clean-bcheck clean-final clean-generic clean-libtool clean-sbinPROGRAMS mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: + +install-exec-am: install-sbinPROGRAMS + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-info-am uninstall-sbinPROGRAMS + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-sbinPROGRAMS ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am info info-am install \ + install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-sbinPROGRAMS install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \ + uninstall-am uninstall-info-am uninstall-sbinPROGRAMS + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 3 +qp_listchart.moc.cpp: $(srcdir)/qp_listchart.h + $(MOC) $(srcdir)/qp_listchart.h -o qp_listchart.moc.cpp + +#>+ 2 +mocs: qp_listchart.moc.cpp + +#>+ 3 +qp_libparted.moc.cpp: $(srcdir)/qp_libparted.h + $(MOC) $(srcdir)/qp_libparted.h -o qp_libparted.moc.cpp + +#>+ 2 +mocs: qp_libparted.moc.cpp + +#>+ 3 +qp_drivelist.moc.cpp: $(srcdir)/qp_drivelist.h + $(MOC) $(srcdir)/qp_drivelist.h -o qp_drivelist.moc.cpp + +#>+ 2 +mocs: qp_drivelist.moc.cpp + +#>+ 3 +qp_partwidget.moc.cpp: $(srcdir)/qp_partwidget.h + $(MOC) $(srcdir)/qp_partwidget.h -o qp_partwidget.moc.cpp + +#>+ 2 +mocs: qp_partwidget.moc.cpp + +#>+ 3 +qp_settings.moc.cpp: $(srcdir)/qp_settings.h + $(MOC) $(srcdir)/qp_settings.h -o qp_settings.moc.cpp + +#>+ 2 +mocs: qp_settings.moc.cpp + +#>+ 3 +qp_diskview.moc.cpp: $(srcdir)/qp_diskview.h + $(MOC) $(srcdir)/qp_diskview.h -o qp_diskview.moc.cpp + +#>+ 2 +mocs: qp_diskview.moc.cpp + +#>+ 3 +qp_dlgconfig.moc.cpp: $(srcdir)/qp_dlgconfig.h + $(MOC) $(srcdir)/qp_dlgconfig.h -o qp_dlgconfig.moc.cpp + +#>+ 2 +mocs: qp_dlgconfig.moc.cpp + +#>+ 3 +qp_dlgprogress.moc.cpp: $(srcdir)/qp_dlgprogress.h + $(MOC) $(srcdir)/qp_dlgprogress.h -o qp_dlgprogress.moc.cpp + +#>+ 2 +mocs: qp_dlgprogress.moc.cpp + +#>+ 3 +qp_dlgabout.moc.cpp: $(srcdir)/qp_dlgabout.h + $(MOC) $(srcdir)/qp_dlgabout.h -o qp_dlgabout.moc.cpp + +#>+ 2 +mocs: qp_dlgabout.moc.cpp + +#>+ 3 +qp_navview.moc.cpp: $(srcdir)/qp_navview.h + $(MOC) $(srcdir)/qp_navview.h -o qp_navview.moc.cpp + +#>+ 2 +mocs: qp_navview.moc.cpp + +#>+ 3 +qp_dlgcreate.moc.cpp: $(srcdir)/qp_dlgcreate.h + $(MOC) $(srcdir)/qp_dlgcreate.h -o qp_dlgcreate.moc.cpp + +#>+ 2 +mocs: qp_dlgcreate.moc.cpp + +#>+ 3 +qp_partition.moc.cpp: $(srcdir)/qp_partition.h + $(MOC) $(srcdir)/qp_partition.h -o qp_partition.moc.cpp + +#>+ 2 +mocs: qp_partition.moc.cpp + +#>+ 3 +qp_sizepart.moc.cpp: $(srcdir)/qp_sizepart.h + $(MOC) $(srcdir)/qp_sizepart.h -o qp_sizepart.moc.cpp + +#>+ 2 +mocs: qp_sizepart.moc.cpp + +#>+ 3 +qp_partlist.moc.cpp: $(srcdir)/qp_partlist.h + $(MOC) $(srcdir)/qp_partlist.h -o qp_partlist.moc.cpp + +#>+ 2 +mocs: qp_partlist.moc.cpp + +#>+ 3 +qp_dlgresize.moc.cpp: $(srcdir)/qp_dlgresize.h + $(MOC) $(srcdir)/qp_dlgresize.h -o qp_dlgresize.moc.cpp + +#>+ 2 +mocs: qp_dlgresize.moc.cpp + +#>+ 3 +qp_dlgdevprop.moc.cpp: $(srcdir)/qp_dlgdevprop.h + $(MOC) $(srcdir)/qp_dlgdevprop.h -o qp_dlgdevprop.moc.cpp + +#>+ 2 +mocs: qp_dlgdevprop.moc.cpp + +#>+ 3 +qp_window.moc.cpp: $(srcdir)/qp_window.h + $(MOC) $(srcdir)/qp_window.h -o qp_window.moc.cpp + +#>+ 2 +mocs: qp_window.moc.cpp + +#>+ 3 +qp_fswrap.moc.cpp: $(srcdir)/qp_fswrap.h + $(MOC) $(srcdir)/qp_fswrap.h -o qp_fswrap.moc.cpp + +#>+ 2 +mocs: qp_fswrap.moc.cpp + +#>+ 3 +qp_spinbox.moc.cpp: $(srcdir)/qp_spinbox.h + $(MOC) $(srcdir)/qp_spinbox.h -o qp_spinbox.moc.cpp + +#>+ 2 +mocs: qp_spinbox.moc.cpp + +#>+ 3 +qp_combospin.moc.cpp: $(srcdir)/qp_combospin.h + $(MOC) $(srcdir)/qp_combospin.h -o qp_combospin.moc.cpp + +#>+ 2 +mocs: qp_combospin.moc.cpp + +#>+ 3 +qp_dlgformat.moc.cpp: $(srcdir)/qp_dlgformat.h + $(MOC) $(srcdir)/qp_dlgformat.h -o qp_dlgformat.moc.cpp + +#>+ 2 +mocs: qp_dlgformat.moc.cpp + +#>+ 3 +qp_listview.moc.cpp: $(srcdir)/qp_listview.h + $(MOC) $(srcdir)/qp_listview.h -o qp_listview.moc.cpp + +#>+ 2 +mocs: qp_listview.moc.cpp + +#>+ 3 +qp_actlist.moc.cpp: $(srcdir)/qp_actlist.h + $(MOC) $(srcdir)/qp_actlist.h -o qp_actlist.moc.cpp + +#>+ 2 +mocs: qp_actlist.moc.cpp + +#>+ 3 +qp_extended.moc.cpp: $(srcdir)/qp_extended.h + $(MOC) $(srcdir)/qp_extended.h -o qp_extended.moc.cpp + +#>+ 2 +mocs: qp_extended.moc.cpp + +#>+ 3 +clean-metasources: + -rm -f qp_listchart.moc.cpp qp_libparted.moc.cpp qp_drivelist.moc.cpp qp_partwidget.moc.cpp qp_settings.moc.cpp qp_diskview.moc.cpp qp_dlgconfig.moc.cpp qp_dlgprogress.moc.cpp qp_dlgabout.moc.cpp qp_navview.moc.cpp qp_dlgcreate.moc.cpp qp_partition.moc.cpp qp_sizepart.moc.cpp qp_partlist.moc.cpp qp_dlgresize.moc.cpp qp_dlgdevprop.moc.cpp qp_window.moc.cpp qp_fswrap.moc.cpp qp_spinbox.moc.cpp qp_combospin.moc.cpp qp_dlgformat.moc.cpp qp_listview.moc.cpp qp_actlist.moc.cpp qp_extended.moc.cpp + +#>+ 2 +KDE_DIST=runprog.h runprog.cpp qp_ui_create.ui qp_ui_format.ui qp_ui_devprop.ui qp_ui_progress.ui qp_debug.h Makefile.in qp_ui_config.ui qp_ui_resize.ui qtparted.pro + +#>+ 9 +clean-ui: + -rm -f \ + qp_ui_config.cpp qp_ui_config.h qp_ui_config.moc \ + qp_ui_create.cpp qp_ui_create.h qp_ui_create.moc \ + qp_ui_format.cpp qp_ui_format.h qp_ui_format.moc \ + qp_ui_progress.cpp qp_ui_progress.h qp_ui_progress.moc \ + qp_ui_resize.cpp qp_ui_resize.h qp_ui_resize.moc \ + qp_ui_devprop.cpp qp_ui_devprop.h qp_ui_devprop.moc -$(top_builddir)/src/Makefile: $(top_builddir)/config.status $(top_srcdir)/src/Makefile.in - cd $(top_builddir) && $(SHELL) ./config.status src/Makefile +#>+ 2 +docs-am: -$(top_builddir)/src/qp_actlist.moc.cpp: $(top_srcdir)/src/qp_actlist.h - @echo 'creating $(top_builddir)/src/qp_actlist.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_combospin.moc.cpp: $(top_srcdir)/src/qp_combospin.h - @echo 'creating $(top_builddir)/src/qp_combospin.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_diskview.moc.cpp: $(top_srcdir)/src/qp_diskview.h - @echo 'creating $(top_builddir)/src/qp_diskview.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_dlgabout.moc.cpp: $(top_srcdir)/src/qp_dlgabout.h - @echo 'creating $(top_builddir)/src/qp_dlgabout.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_dlgconfig.moc.cpp: $(top_srcdir)/src/qp_dlgconfig.h - @echo 'creating $(top_builddir)/src/qp_dlgconfig.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_dlgcreate.moc.cpp: $(top_srcdir)/src/qp_dlgcreate.h - @echo 'creating $(top_builddir)/src/qp_dlgcreate.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_dlgdevprop.moc.cpp: $(top_srcdir)/src/qp_dlgdevprop.h - @echo 'creating $(top_builddir)/src/qp_dlgdevprop.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_dlgformat.moc.cpp: $(top_srcdir)/src/qp_dlgformat.h - @echo 'creating $(top_builddir)/src/qp_dlgformat.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_dlgprogress.moc.cpp: $(top_srcdir)/src/qp_dlgprogress.h - @echo 'creating $(top_builddir)/src/qp_dlgprogress.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_dlgresize.moc.cpp: $(top_srcdir)/src/qp_dlgresize.h - @echo 'creating $(top_builddir)/src/qp_dlgresize.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_drivelist.moc.cpp: $(top_srcdir)/src/qp_drivelist.h - @echo 'creating $(top_builddir)/src/qp_drivelist.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_extended.moc.cpp: $(top_srcdir)/src/qp_extended.h - @echo 'creating $(top_builddir)/src/qp_extended.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_fswrap.moc.cpp: $(top_srcdir)/src/qp_fswrap.h - @echo 'creating $(top_builddir)/src/qp_fswrap.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_libparted.moc.cpp: $(top_srcdir)/src/qp_libparted.h - @echo 'creating $(top_builddir)/src/qp_libparted.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_listchart.moc.cpp: $(top_srcdir)/src/qp_listchart.h - @echo 'creating $(top_builddir)/src/qp_listchart.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_listview.moc.cpp: $(top_srcdir)/src/qp_listview.h - @echo 'creating $(top_builddir)/src/qp_listview.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_navview.moc.cpp: $(top_srcdir)/src/qp_navview.h - @echo 'creating $(top_builddir)/src/qp_navview.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_options.h: $(top_builddir)/config.status $(srcdir)/qp_options.h.in - cd $(top_builddir) && $(SHELL) ./config.status src/qp_options.h - -$(top_builddir)/src/qp_partition.moc.cpp: $(top_srcdir)/src/qp_partition.h - @echo 'creating $(top_builddir)/src/qp_partition.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_partlist.moc.cpp: $(top_srcdir)/src/qp_partlist.h - @echo 'creating $(top_builddir)/src/qp_partlist.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_partwidget.moc.cpp: $(top_srcdir)/src/qp_partwidget.h - @echo 'creating $(top_builddir)/src/qp_partwidget.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_settings.moc.cpp: $(top_srcdir)/src/qp_settings.h - @echo 'creating $(top_builddir)/src/qp_settings.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_sizepart.moc.cpp: $(top_srcdir)/src/qp_sizepart.h - @echo 'creating $(top_builddir)/src/qp_sizepart.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_spinbox.moc.cpp: $(top_srcdir)/src/qp_spinbox.h - @echo 'creating $(top_builddir)/src/qp_spinbox.moc.cpp' - @$(MOC) $? -o $@ - -$(top_builddir)/src/qp_window.moc.cpp: $(top_srcdir)/src/qp_window.h - @echo 'creating $(top_builddir)/src/qp_window.moc.cpp' - @$(MOC) $? -o $@ - -all: $(top_builddir)/src/Makefile -final: - /usr/share/unsermake/unsermake -C $(top_builddir)/src UNSERMAKE_FORCE_FINAL=1 qtparted - -INCLUDES = -I$(top_builddir)/src -I$(qt_includes) -I$(all_includes) -METASOURCES = qp_settings=./qp_settings.h qp_spinbox=./qp_spinbox.h qp_listview=./qp_listview.h qp_window=./qp_window.h qp_actlist=./qp_actlist.h qp_sizepart=./qp_sizepart.h qp_partwidget=./qp_partwidget.h qp_diskview=./qp_diskview.h qp_dlgprogress=./qp_dlgprogress.h qp_combospin=./qp_combospin.h qp_dlgformat=./qp_dlgformat.h qp_dlgresize=./qp_dlgresize.h qp_navview=./qp_navview.h qp_dlgconfig=./qp_dlgconfig.h qp_partition=./qp_partition.h qp_fswrap=./qp_fswrap.h qp_dlgabout=./qp_dlgabout.h qp_listchart=./qp_listchart.h qp_dlgcreate=./qp_dlgcreate.h qp_dlgdevprop=./qp_dlgdevprop.h qp_libparted=./qp_libparted.h qp_partlist=./qp_partlist.h qp_drivelist=./qp_drivelist.h qp_extended=./qp_extended.h qp_ui_config=qp_ui_config.h=qp_ui_config.cpp qp_ui_create=qp_ui_create.h=qp_ui_create.cpp qp_ui_format=qp_ui_format.h=qp_ui_format.cpp qp_ui_progress=qp_ui_progress.h=qp_ui_progress.cpp qp_ui_resize=qp_ui_resize.h=qp_ui_resize.cpp qp_ui_devprop=qp_ui_devprop.h=qp_ui_devprop.cpp -QT3_UIFILES = qp_ui_config qp_ui_create qp_ui_format qp_ui_progress qp_ui_resize qp_ui_devprop -__um_includes_config.h = qp_window.cpp main.cpp qp_actlist.cpp qp_fswrap.cpp qp_filesystem.cpp qp_libparted.cpp qp_listview.cpp -__um_includes_dirent.h = qp_devlist.cpp qp_common.cpp -__um_includes_errno.h = runprog.cpp statistics.cpp qp_fswrap.cpp -__um_includes_fcntl.h = runprog.cpp statistics.cpp qp_fswrap.cpp -__um_includes_getopt.h = main.cpp -__um_includes_iostream = main.cpp -__um_includes_mntent.h = statistics.cpp -__um_includes_qaction.h = qp_window.cpp main.cpp qp_drivelist.cpp qp_navview.cpp -__um_includes_qapplication.h = qp_window.cpp main.cpp qp_actlist.cpp qp_fswrap.cpp qp_libparted.cpp qp_dlgprogress.cpp -__um_includes_qcolor.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_fswrap.cpp qp_listchart.cpp qp_dlgconfig.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qcombobox.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_dlgconfig.cpp qp_combospin.cpp qp_dlgformat.cpp -__um_includes_qcursor.h = qp_partwidget.cpp qp_sizepart.cpp -__um_includes_qdatetime.h = qp_debug.cpp -__um_includes_qdialog.h = qp_window.cpp qp_dlgabout.cpp -__um_includes_qframe.h = qp_dlgresize.cpp -__um_includes_qhbox.h = qp_window.cpp -__um_includes_qlabel.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp qp_dlgdevprop.cpp main.cpp qp_dlgabout.cpp qp_navview.cpp qp_dlgprogress.cpp -__um_includes_qlayout.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp qp_dlgabout.cpp qp_combospin.cpp qp_dlgformat.cpp qp_navview.cpp -__um_includes_qlineedit.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_dlgconfig.cpp qp_dlgformat.cpp -__um_includes_qlistview.h = qp_window.cpp main.cpp qp_drivelist.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qmainwindow.h = qp_window.cpp main.cpp -__um_includes_qmenubar.h = qp_window.cpp -__um_includes_qmessagebox.h = qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp -__um_includes_qobject.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_fswrap.cpp qp_listchart.cpp qp_settings.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qp_actlist.h = qp_actlist.cpp qp_fswrap.cpp qp_libparted.cpp -__um_includes_qp_combospin.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_combospin.cpp qp_dlgformat.cpp -__um_includes_qp_common.h = qp_window.cpp main.cpp statistics.cpp qp_fswrap.cpp qp_dlgconfig.cpp qp_settings.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp qp_common.cpp -__um_includes_qp_debug.h = main.cpp qp_actlist.cpp qp_fswrap.cpp qp_libparted.cpp qp_debug.cpp -__um_includes_qp_devlist.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_fswrap.cpp qp_listchart.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qp_diskview.h = qp_window.cpp main.cpp qp_diskview.cpp -__um_includes_qp_dlgabout.h = qp_window.cpp qp_dlgabout.cpp -__um_includes_qp_dlgconfig.h = qp_window.cpp main.cpp qp_dlgconfig.cpp -__um_includes_qp_dlgcreate.h = qp_dlgcreate.cpp qp_window.cpp main.cpp -__um_includes_qp_dlgdevprop.h = qp_window.cpp qp_dlgdevprop.cpp main.cpp -__um_includes_qp_dlgformat.h = qp_window.cpp main.cpp qp_dlgformat.cpp -__um_includes_qp_dlgprogress.h = qp_window.cpp main.cpp qp_dlgprogress.cpp -__um_includes_qp_dlgresize.h = qp_dlgresize.cpp qp_window.cpp main.cpp -__um_includes_qp_drivelist.h = qp_window.cpp main.cpp qp_drivelist.cpp qp_navview.cpp -__um_includes_qp_extended.h = qp_window.cpp main.cpp qp_listchart.cpp qp_extended.cpp qp_diskview.cpp -__um_includes_qp_exttools.h = qp_window.cpp main.cpp statistics.cpp qp_exttools.cpp qp_fswrap.cpp qp_dlgconfig.cpp qp_settings.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp qp_common.cpp -__um_includes_qp_filesystem.h = qp_dlgcreate.cpp qp_window.cpp statistics.cpp qp_actlist.cpp qp_partwidget.cpp qp_filesystem.cpp qp_libparted.cpp qp_listview.cpp -__um_includes_qp_fswrap.h = qp_window.cpp qp_actlist.cpp qp_fswrap.cpp qp_filesystem.cpp qp_libparted.cpp -__um_includes_qp_libparted.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_fswrap.cpp qp_listchart.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qp_listchart.h = qp_window.cpp main.cpp qp_listchart.cpp qp_diskview.cpp -__um_includes_qp_listview.h = qp_window.cpp main.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qp_navview.h = qp_window.cpp main.cpp qp_navview.cpp -__um_includes_qp_options.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp qp_dlgdevprop.cpp main.cpp runprog.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_exttools.cpp qp_fswrap.cpp qp_listchart.cpp qp_dlgconfig.cpp qp_settings.cpp qp_dlgabout.cpp qp_filesystem.cpp qp_combospin.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp qp_navview.cpp qp_common.cpp qp_spinbox.cpp qp_diskview.cpp qp_listview.cpp qp_dlgprogress.cpp -__um_includes_qp_partition.h = qp_window.cpp main.cpp qp_listchart.cpp qp_partition.cpp qp_extended.cpp qp_diskview.cpp -__um_includes_qp_partlist.h = qp_window.cpp main.cpp qp_partlist.cpp qp_listchart.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qp_partwidget.h = qp_window.cpp main.cpp qp_partwidget.cpp qp_listchart.cpp qp_partition.cpp qp_extended.cpp qp_diskview.cpp -__um_includes_qp_settings.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_fswrap.cpp qp_listchart.cpp qp_settings.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qp_sizepart.h = qp_dlgresize.cpp qp_window.cpp main.cpp qp_sizepart.cpp -__um_includes_qp_spinbox.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_combospin.cpp qp_dlgformat.cpp qp_spinbox.cpp -__um_includes_qp_ui_config.h = qp_window.cpp main.cpp qp_dlgconfig.cpp -__um_includes_qp_ui_create.h = qp_dlgcreate.cpp qp_window.cpp main.cpp -__um_includes_qp_ui_devprop.h = qp_window.cpp qp_dlgdevprop.cpp main.cpp -__um_includes_qp_ui_format.h = qp_window.cpp main.cpp qp_dlgformat.cpp -__um_includes_qp_ui_progress.h = qp_window.cpp main.cpp qp_dlgprogress.cpp -__um_includes_qp_ui_resize.h = qp_dlgresize.cpp qp_window.cpp main.cpp -__um_includes_qp_window.h = qp_window.cpp main.cpp -__um_includes_qpainter.h = qp_partwidget.cpp qp_listchart.cpp qp_sizepart.cpp -__um_includes_qpixmap.h = qp_dlgcreate.cpp qp_window.cpp statistics.cpp qp_actlist.cpp qp_partwidget.cpp qp_filesystem.cpp qp_sizepart.cpp qp_libparted.cpp qp_drivelist.cpp qp_listview.cpp -__um_includes_qpopupmenu.h = qp_window.cpp main.cpp qp_drivelist.cpp qp_navview.cpp -__um_includes_qprogressbar.h = qp_dlgprogress.cpp -__um_includes_qptrlist.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_exttools.cpp qp_fswrap.cpp qp_listchart.cpp qp_dlgconfig.cpp qp_settings.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_common.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qptypes.h = qp_window.cpp qp_actlist.cpp qp_fswrap.cpp qp_filesystem.cpp qp_libparted.cpp -__um_includes_qpushbutton.h = qp_dlgabout.cpp qp_dlgprogress.cpp -__um_includes_qradiobutton.h = qp_dlgcreate.cpp qp_window.cpp qp_dlgformat.cpp -__um_includes_qregexp.h = qp_fswrap.cpp -__um_includes_qsettings.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_fswrap.cpp qp_listchart.cpp qp_settings.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qspinbox.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_combospin.cpp qp_dlgformat.cpp qp_spinbox.cpp -__um_includes_qsplashscreen.h = main.cpp -__um_includes_qsplitter.h = qp_window.cpp -__um_includes_qstatusbar.h = qp_window.cpp -__um_includes_qstring.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp qp_dlgdevprop.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_exttools.cpp qp_fswrap.cpp qp_listchart.cpp qp_dlgconfig.cpp qp_settings.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_common.cpp qp_debug.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qstringlist.h = qp_window.cpp qp_actlist.cpp qp_fswrap.cpp qp_filesystem.cpp qp_libparted.cpp -__um_includes_qstrlist.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_fswrap.cpp qp_listchart.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qstyle.h = qp_partwidget.cpp qp_sizepart.cpp -__um_includes_qtextcodec.h = main.cpp -__um_includes_qtimer.h = main.cpp -__um_includes_qtoolbar.h = qp_window.cpp -__um_includes_qtoolbutton.h = qp_window.cpp main.cpp -__um_includes_qtooltip.h = qp_window.cpp qp_dlgconfig.cpp -__um_includes_qtparted.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_fswrap.cpp qp_listchart.cpp qp_dlgconfig.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_qtranslator.h = main.cpp -__um_includes_qvalidator.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_combospin.cpp qp_dlgformat.cpp qp_spinbox.cpp -__um_includes_qvbox.h = qp_window.cpp main.cpp qp_navview.cpp qp_diskview.cpp -__um_includes_qwhatsthis.h = qp_window.cpp qp_dlgconfig.cpp -__um_includes_qwidget.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_fswrap.cpp qp_listchart.cpp qp_filesystem.cpp qp_combospin.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_runprog.h = runprog.cpp -__um_includes_statistics.h = statistics.cpp qp_actlist.cpp -__um_includes_stdarg.h = qp_window.cpp qp_actlist.cpp qp_fswrap.cpp qp_filesystem.cpp qp_libparted.cpp qp_debug.cpp -__um_includes_stdio.h = main.cpp runprog.cpp statistics.cpp qp_actlist.cpp qp_exttools.cpp qp_fswrap.cpp qp_filesystem.cpp qp_libparted.cpp qp_common.cpp qp_debug.cpp -__um_includes_stdlib.h = runprog.cpp statistics.cpp qp_libparted.cpp qp_debug.cpp qp_spinbox.cpp -__um_includes_string.h = runprog.cpp statistics.cpp qp_debug.cpp -__um_includes_time.h = qp_dlgcreate.cpp qp_dlgresize.cpp qp_window.cpp main.cpp statistics.cpp qp_actlist.cpp qp_partlist.cpp qp_partwidget.cpp qp_fswrap.cpp qp_listchart.cpp qp_settings.cpp qp_filesystem.cpp qp_partition.cpp qp_sizepart.cpp qp_dlgformat.cpp qp_devlist.cpp qp_libparted.cpp qp_drivelist.cpp qp_extended.cpp qp_navview.cpp qp_diskview.cpp qp_listview.cpp -__um_includes_unistd.h = runprog.cpp statistics.cpp qp_fswrap.cpp qp_devlist.cpp qp_common.cpp -qtparted_SOURCES = qp_ui_config.ui qp_ui_create.ui qp_ui_format.ui qp_ui_progress.ui qp_ui_resize.ui qp_ui_devprop.ui main.cpp qp_dlgabout.cpp qp_dlgconfig.cpp qp_dlgcreate.cpp qp_dlgformat.cpp qp_dlgresize.cpp qp_dlgprogress.cpp qp_dlgdevprop.cpp qp_drivelist.cpp qp_devlist.cpp qp_libparted.cpp qp_partlist.cpp qp_actlist.cpp qp_extended.cpp qp_listchart.cpp qp_partition.cpp qp_partwidget.cpp qp_diskview.cpp qp_window.cpp qp_combospin.cpp qp_exttools.cpp qp_listview.cpp qp_settings.cpp qp_common.cpp qp_filesystem.cpp qp_navview.cpp qp_fswrap.cpp qp_sizepart.cpp qp_spinbox.cpp qp_debug.cpp statistics.cpp qp_settings.moc.cpp qp_spinbox.moc.cpp qp_listview.moc.cpp qp_window.moc.cpp qp_actlist.moc.cpp qp_sizepart.moc.cpp qp_partwidget.moc.cpp qp_diskview.moc.cpp qp_dlgprogress.moc.cpp qp_combospin.moc.cpp qp_dlgformat.moc.cpp qp_dlgresize.moc.cpp qp_navview.moc.cpp qp_dlgconfig.moc.cpp qp_partition.moc.cpp qp_fswrap.moc.cpp qp_dlgabout.moc.cpp qp_listchart.moc.cpp qp_dlgcreate.moc.cpp qp_dlgdevprop.moc.cpp qp_libparted.moc.cpp qp_partlist.moc.cpp qp_drivelist.moc.cpp qp_extended.moc.cpp -.PHONY: all final +#>+ 6 +force-reedit: + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu src/Makefile + cd $(top_srcdir) && perl admin/am_edit src/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-am + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXXCOMPILE) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 11 +qtparted.all_cpp.cpp: $(srcdir)/Makefile.in $(srcdir)/main.cpp $(srcdir)/qp_dlgabout.cpp $(srcdir)/qp_dlgconfig.cpp $(srcdir)/qp_dlgcreate.cpp $(srcdir)/qp_dlgformat.cpp $(srcdir)/qp_dlgresize.cpp $(srcdir)/qp_dlgprogress.cpp $(srcdir)/qp_dlgdevprop.cpp $(srcdir)/qp_drivelist.cpp $(srcdir)/qp_devlist.cpp $(srcdir)/qp_libparted.cpp $(srcdir)/qp_partlist.cpp $(srcdir)/qp_actlist.cpp $(srcdir)/qp_extended.cpp $(srcdir)/qp_listchart.cpp $(srcdir)/qp_partition.cpp $(srcdir)/qp_partwidget.cpp $(srcdir)/qp_diskview.cpp $(srcdir)/qp_window.cpp $(srcdir)/qp_combospin.cpp $(srcdir)/qp_exttools.cpp $(srcdir)/qp_listview.cpp $(srcdir)/qp_settings.cpp $(srcdir)/qp_common.cpp $(srcdir)/qp_filesystem.cpp $(srcdir)/qp_navview.cpp $(srcdir)/qp_fswrap.cpp $(srcdir)/qp_sizepart.cpp $(srcdir)/qp_spinbox.cpp $(srcdir)/qp_debug.cpp $(srcdir)/statistics.cpp qp_ui_config.cpp qp_ui_create.cpp qp_ui_format.cpp qp_ui_progress.cpp qp_ui_resize.cpp qp_ui_devprop.cpp qp_listchart.moc.cpp qp_drivelist.moc.cpp qp_libparted.moc.cpp qp_partwidget.moc.cpp qp_diskview.moc.cpp qp_settings.moc.cpp qp_dlgprogress.moc.cpp qp_dlgconfig.moc.cpp qp_dlgabout.moc.cpp qp_navview.moc.cpp qp_dlgcreate.moc.cpp qp_partition.moc.cpp qp_sizepart.moc.cpp qp_partlist.moc.cpp qp_dlgresize.moc.cpp qp_dlgdevprop.moc.cpp qp_fswrap.moc.cpp qp_window.moc.cpp qp_combospin.moc.cpp qp_spinbox.moc.cpp qp_listview.moc.cpp qp_dlgformat.moc.cpp qp_actlist.moc.cpp qp_extended.moc.cpp qp_ui_format.moc qp_ui_resize.moc qp_ui_config.moc qp_ui_create.moc qp_ui_devprop.moc qp_ui_progress.moc + @echo 'creating qtparted.all_cpp.cpp ...'; \ + rm -f qtparted.all_cpp.files qtparted.all_cpp.final; \ + echo "#define KDE_USE_FINAL 1" >> qtparted.all_cpp.final; \ + for file in main.cpp qp_dlgabout.cpp qp_dlgconfig.cpp qp_dlgcreate.cpp qp_dlgformat.cpp qp_dlgresize.cpp qp_dlgprogress.cpp qp_dlgdevprop.cpp qp_drivelist.cpp qp_devlist.cpp qp_libparted.cpp qp_partlist.cpp qp_actlist.cpp qp_extended.cpp qp_listchart.cpp qp_partition.cpp qp_partwidget.cpp qp_diskview.cpp qp_window.cpp qp_combospin.cpp qp_exttools.cpp qp_listview.cpp qp_settings.cpp qp_common.cpp qp_filesystem.cpp qp_navview.cpp qp_fswrap.cpp qp_sizepart.cpp qp_spinbox.cpp qp_debug.cpp statistics.cpp qp_ui_config.cpp qp_ui_create.cpp qp_ui_format.cpp qp_ui_progress.cpp qp_ui_resize.cpp qp_ui_devprop.cpp qp_listchart.moc.cpp qp_drivelist.moc.cpp qp_libparted.moc.cpp qp_partwidget.moc.cpp qp_diskview.moc.cpp qp_settings.moc.cpp qp_dlgprogress.moc.cpp qp_dlgconfig.moc.cpp qp_dlgabout.moc.cpp qp_navview.moc.cpp qp_dlgcreate.moc.cpp qp_partition.moc.cpp qp_sizepart.moc.cpp qp_partlist.moc.cpp qp_dlgresize.moc.cpp qp_dlgdevprop.moc.cpp qp_fswrap.moc.cpp qp_window.moc.cpp qp_combospin.moc.cpp qp_spinbox.moc.cpp qp_listview.moc.cpp qp_dlgformat.moc.cpp qp_actlist.moc.cpp qp_extended.moc.cpp ; do \ + echo "#include \"$$file\"" >> qtparted.all_cpp.files; \ + test ! -f $(srcdir)/$$file || egrep '^#pragma +implementation' $(srcdir)/$$file >> qtparted.all_cpp.final; \ + done; \ + cat qtparted.all_cpp.final qtparted.all_cpp.files > qtparted.all_cpp.cpp; \ + rm -f qtparted.all_cpp.final qtparted.all_cpp.files + +#>+ 3 +clean-final: + -rm -f qtparted.all_cpp.cpp + +#>+ 3 +final: + $(MAKE) qtparted_OBJECTS="$(qtparted_final_OBJECTS)" all-am + +#>+ 3 +final-install: + $(MAKE) qtparted_OBJECTS="$(qtparted_final_OBJECTS)" install-am + +#>+ 3 +no-final: + $(MAKE) qtparted_OBJECTS="$(qtparted_nofinal_OBJECTS)" all-am + +#>+ 3 +no-final-install: + $(MAKE) qtparted_OBJECTS="$(qtparted_nofinal_OBJECTS)" install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 34 +$(srcdir)/qp_common.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_devlist.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_partlist.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/main.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_dlgresize.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_fswrap.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_sizepart.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_partwidget.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_partition.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_listchart.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_drivelist.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_dlgformat.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +nmcheck-am: nmcheck +$(srcdir)/qp_spinbox.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_dlgprogress.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_filesystem.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_extended.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_dlgcreate.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_window.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_dlgabout.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_debug.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_combospin.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_navview.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_listview.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_settings.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_actlist.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/statistics.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +nmcheck: +$(srcdir)/qp_dlgconfig.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_diskview.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_dlgdevprop.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_exttools.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h +$(srcdir)/qp_libparted.cpp: qp_ui_config.h qp_ui_create.h qp_ui_format.h qp_ui_progress.h qp_ui_resize.h qp_ui_devprop.h + +#>+ 66 +qp_ui_resize.cpp: $(srcdir)/qp_ui_resize.ui qp_ui_resize.h qp_ui_resize.moc + rm -f qp_ui_resize.cpp + $(UIC) -i qp_ui_resize.h $(srcdir)/qp_ui_resize.ui > qp_ui_resize.cpp; ret=$$?; \ + if test "$$ret" = 0; then echo '#include "qp_ui_resize.moc"' >> qp_ui_resize.cpp; else rm -f qp_ui_resize.cpp ; exit $$ret ; fi + +qp_ui_resize.h: $(srcdir)/qp_ui_resize.ui + rm -rf qp_ui_resize.h; + $(UIC) -o qp_ui_resize.h $(srcdir)/qp_ui_resize.ui +qp_ui_resize.moc: qp_ui_resize.h + $(MOC) qp_ui_resize.h -o qp_ui_resize.moc + +qp_ui_create.cpp: $(srcdir)/qp_ui_create.ui qp_ui_create.h qp_ui_create.moc + rm -f qp_ui_create.cpp + $(UIC) -i qp_ui_create.h $(srcdir)/qp_ui_create.ui > qp_ui_create.cpp; ret=$$?; \ + if test "$$ret" = 0; then echo '#include "qp_ui_create.moc"' >> qp_ui_create.cpp; else rm -f qp_ui_create.cpp ; exit $$ret ; fi + +qp_ui_create.h: $(srcdir)/qp_ui_create.ui + rm -rf qp_ui_create.h; + $(UIC) -o qp_ui_create.h $(srcdir)/qp_ui_create.ui +qp_ui_create.moc: qp_ui_create.h + $(MOC) qp_ui_create.h -o qp_ui_create.moc + +qp_ui_config.cpp: $(srcdir)/qp_ui_config.ui qp_ui_config.h qp_ui_config.moc + rm -f qp_ui_config.cpp + $(UIC) -i qp_ui_config.h $(srcdir)/qp_ui_config.ui > qp_ui_config.cpp; ret=$$?; \ + if test "$$ret" = 0; then echo '#include "qp_ui_config.moc"' >> qp_ui_config.cpp; else rm -f qp_ui_config.cpp ; exit $$ret ; fi + +qp_ui_config.h: $(srcdir)/qp_ui_config.ui + rm -rf qp_ui_config.h; + $(UIC) -o qp_ui_config.h $(srcdir)/qp_ui_config.ui +qp_ui_config.moc: qp_ui_config.h + $(MOC) qp_ui_config.h -o qp_ui_config.moc + +qp_ui_devprop.cpp: $(srcdir)/qp_ui_devprop.ui qp_ui_devprop.h qp_ui_devprop.moc + rm -f qp_ui_devprop.cpp + $(UIC) -i qp_ui_devprop.h $(srcdir)/qp_ui_devprop.ui > qp_ui_devprop.cpp; ret=$$?; \ + if test "$$ret" = 0; then echo '#include "qp_ui_devprop.moc"' >> qp_ui_devprop.cpp; else rm -f qp_ui_devprop.cpp ; exit $$ret ; fi + +qp_ui_devprop.h: $(srcdir)/qp_ui_devprop.ui + rm -rf qp_ui_devprop.h; + $(UIC) -o qp_ui_devprop.h $(srcdir)/qp_ui_devprop.ui +qp_ui_devprop.moc: qp_ui_devprop.h + $(MOC) qp_ui_devprop.h -o qp_ui_devprop.moc + +qp_ui_format.cpp: $(srcdir)/qp_ui_format.ui qp_ui_format.h qp_ui_format.moc + rm -f qp_ui_format.cpp + $(UIC) -i qp_ui_format.h $(srcdir)/qp_ui_format.ui > qp_ui_format.cpp; ret=$$?; \ + if test "$$ret" = 0; then echo '#include "qp_ui_format.moc"' >> qp_ui_format.cpp; else rm -f qp_ui_format.cpp ; exit $$ret ; fi + +qp_ui_format.h: $(srcdir)/qp_ui_format.ui + rm -rf qp_ui_format.h; + $(UIC) -o qp_ui_format.h $(srcdir)/qp_ui_format.ui +qp_ui_format.moc: qp_ui_format.h + $(MOC) qp_ui_format.h -o qp_ui_format.moc + +qp_ui_progress.cpp: $(srcdir)/qp_ui_progress.ui qp_ui_progress.h qp_ui_progress.moc + rm -f qp_ui_progress.cpp + $(UIC) -i qp_ui_progress.h $(srcdir)/qp_ui_progress.ui > qp_ui_progress.cpp; ret=$$?; \ + if test "$$ret" = 0; then echo '#include "qp_ui_progress.moc"' >> qp_ui_progress.cpp; else rm -f qp_ui_progress.cpp ; exit $$ret ; fi + +qp_ui_progress.h: $(srcdir)/qp_ui_progress.ui + rm -rf qp_ui_progress.h; + $(UIC) -o qp_ui_progress.h $(srcdir)/qp_ui_progress.ui +qp_ui_progress.moc: qp_ui_progress.h + $(MOC) qp_ui_progress.h -o qp_ui_progress.moc --- qtparted-0.4.5.orig/ts/qtparted_ca.ts +++ qtparted-0.4.5/ts/qtparted_ca.ts @@ -3,7 +3,7 @@ command not found - comanda no trobada + comanda no trobada @@ -45,6 +45,11 @@ An error has happened during ped_disk_delete_partition call. Ha ocorregut un error durant la crida a ped_disk_delete_partition. + + command not found + comanda no trobada + + QObject --- qtparted-0.4.5.orig/ts/qtparted_fr.ts +++ qtparted-0.4.5/ts/qtparted_fr.ts @@ -3,7 +3,7 @@ command not found - Commande non trouvée + Commande non trouvée @@ -44,6 +44,10 @@ An error has happened during ped_disk_delete_partition call. Une erreur s'est produite pendant l'appel ped_disk_delete_partition. + + command not found + Commande non trouvée + QObject --- qtparted-0.4.5.orig/ts/qtparted_it.ts +++ qtparted-0.4.5/ts/qtparted_it.ts @@ -3,7 +3,7 @@ command not found - Impossibile eseguire il comando + Impossibile eseguire il comando @@ -44,6 +44,10 @@ An error has happened during ped_disk_delete_partition call. Un errore è occorso durante la chiamata ped_disk_delete_partition. + + command not found + Impossibile eseguire il comando + QObject --- qtparted-0.4.5.orig/ts/Makefile.in +++ qtparted-0.4.5/ts/Makefile.in @@ -1,44 +1,518 @@ -# Makefile.in generated by unsermake -#################################### +# Makefile.in generated by automake 1.7.9 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 1.3 $ +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. -top_builddir = .. -top_srcdir = @top_srcdir@ -srcdir = @srcdir@ -.FORWARDS: all install install-data install-exec clean check force-reedit +@SET_MAKE@ -all: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) all - -install: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install - -install-data: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-data - -install-exec: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-exec - -clean: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) clean - -check: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) check +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. -force-reedit: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) force-reedit +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFAULT_DEBUG_LEVEL = @DEFAULT_DEBUG_LEVEL@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +FILESYS_EXT3FS_SUPPORT = @FILESYS_EXT3FS_SUPPORT@ +FILESYS_JFS_SUPPORT = @FILESYS_JFS_SUPPORT@ +FILESYS_NTFS_SUPPORT = @FILESYS_NTFS_SUPPORT@ +FILESYS_REISERFS_SUPPORT = @FILESYS_REISERFS_SUPPORT@ +FILESYS_XFS_SUPPORT = @FILESYS_XFS_SUPPORT@ +FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@ +FSPATH_MKFSEXT3 = @FSPATH_MKFSEXT3@ +FSPATH_MKFSJFS = @FSPATH_MKFSJFS@ +FSPATH_MKFSXFS = @FSPATH_MKFSXFS@ +FSPATH_MKNTFS = @FSPATH_MKNTFS@ +FSPATH_MOUNT = @FSPATH_MOUNT@ +FSPATH_NTFSRESIZE = @FSPATH_NTFSRESIZE@ +FSPATH_UMOUNT = @FSPATH_UMOUNT@ +FSPATH_XFS_GROWFS = @FSPATH_XFS_GROWFS@ +HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@ +HOMEPAGE = @HOMEPAGE@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KDE_CHECK_PLUGIN = @KDE_CHECK_PLUGIN@ +KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ +KDE_MT_LIBS = @KDE_MT_LIBS@ +KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@ +KDE_PLUGIN = @KDE_PLUGIN@ +KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ +KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ +KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ +KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ +KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@ +KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@ +LDFLAGS = @LDFLAGS@ +LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@ +LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@ +LIBCOMPAT = @LIBCOMPAT@ +LIBCRYPT = @LIBCRYPT@ +LIBDL = @LIBDL@ +LIBJPEG = @LIBJPEG@ +LIBOBJS = @LIBOBJS@ +LIBPNG = @LIBPNG@ +LIBPTHREAD = @LIBPTHREAD@ +LIBRESOLV = @LIBRESOLV@ +LIBS = @LIBS@ +LIBSM = @LIBSM@ +LIBSOCKET = @LIBSOCKET@ +LIBTOOL = @LIBTOOL@ +LIBUCB = @LIBUCB@ +LIBUTIL = @LIBUTIL@ +LIBZ = @LIBZ@ +LIB_POLL = @LIB_POLL@ +LIB_QPE = @LIB_QPE@ +LIB_QT = @LIB_QT@ +LIB_X11 = @LIB_X11@ +LIB_XEXT = @LIB_XEXT@ +LIB_XRENDER = @LIB_XRENDER@ +LN_S = @LN_S@ +LOGDIR = @LOGDIR@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ +MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ +MAKEINFO = @MAKEINFO@ +MOC = @MOC@ +NOOPT_CFLAGS = @NOOPT_CFLAGS@ +NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ +OBJEXT = @OBJEXT@ +OS = @OS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_QTDIR = @PATH_QTDIR@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +QTE_NORTTI = @QTE_NORTTI@ +QTPARTED_LDFLAGS = @QTPARTED_LDFLAGS@ +QTPARTED_LIBS = @QTPARTED_LIBS@ +QTPARTED_PREFIX = @QTPARTED_PREFIX@ +QTPATH_LRELEASE = @QTPATH_LRELEASE@ +QT_INCLUDES = @QT_INCLUDES@ +QT_LDFLAGS = @QT_LDFLAGS@ +RANLIB = @RANLIB@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +UIC = @UIC@ +UIC_TR = @UIC_TR@ +USER_INCLUDES = @USER_INCLUDES@ +USER_LDFLAGS = @USER_LDFLAGS@ +USE_EXCEPTIONS = @USE_EXCEPTIONS@ +USE_RTTI = @USE_RTTI@ +USE_THREADS = @USE_THREADS@ +VERSION = @VERSION@ +WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_INCLUDES = @X_INCLUDES@ +X_LDFLAGS = @X_LDFLAGS@ +X_PRE_LIBS = @X_PRE_LIBS@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +ac_ct_RANLIB = @ac_ct_RANLIB@ +ac_ct_STRIP = @ac_ct_STRIP@ +all_includes = @all_includes@ +all_libraries = @all_libraries@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +include_x11_FALSE = @include_x11_FALSE@ +include_x11_TRUE = @include_x11_TRUE@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_qtver = @kde_qtver@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +qt_includes = @qt_includes@ +qt_libraries = @qt_libraries@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@ +unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@ +x_includes = @x_includes@ +x_libraries = @x_libraries@ +EXTRA_DIST = qtparted_cs.qm qtparted_de.qm qtparted_es.qm qtparted_fr.qm qtparted_it.qm qtparted_pl.qm qtparted_ru.qm qtparted_ua.qm qtparted_ca.qm + +trans_DATA = qtparted_cs.qm qtparted_de.qm qtparted_es.qm qtparted_fr.qm qtparted_it.qm qtparted_pl.qm qtparted_ru.qm qtparted_ua.qm qtparted_ca.qm +transdir = $(prefix)/share/qtparted/locale + +CLEANFILES = $(trans_DATA) +DISTCLEANFILES = $(trans_DATA) +MAINTAINERCLEANFILES = $(trans_DATA) +subdir = ts +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(trans_DATA) + +DIST_COMMON = $(srcdir)/Makefile.in Makefile.am +#>- all: all-am +#>+ 1 +all: docs-am all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu ts/Makefile +#>+ 3 + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu ts/Makefile + cd $(top_srcdir) && perl admin/am_edit ts/Makefile.in +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +transDATA_INSTALL = $(INSTALL_DATA) +install-transDATA: $(trans_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(transdir) + @list='$(trans_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(transDATA_INSTALL) $$d$$p $(DESTDIR)$(transdir)/$$f"; \ + $(transDATA_INSTALL) $$d$$p $(DESTDIR)$(transdir)/$$f; \ + done + +uninstall-transDATA: + @$(NORMAL_UNINSTALL) + @list='$(trans_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(transdir)/$$f"; \ + rm -f $(DESTDIR)$(transdir)/$$f; \ + done +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) + +top_distdir = .. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(transdir) +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +#>- clean: clean-am +#>+ 1 +clean: kde-rpo-clean clean-am + +#>- clean-am: clean-generic clean-libtool mostlyclean-am +#>+ 1 +clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-transDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-info-am uninstall-transDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-strip install-transDATA \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ + uninstall-info-am uninstall-transDATA + + +qtparted_cs.qm: + lupdate -verbose ../src/*.cpp ../src/*.h ../src/*.ui -ts qtparted_cs.ts + lrelease qtparted_cs.ts + +qtparted_de.qm: + lupdate -verbose ../src/*.cpp ../src/*.h ../src/*.ui -ts qtparted_de.ts + lrelease qtparted_de.ts + +qtparted_es.qm: + lupdate -verbose ../src/*.cpp ../src/*.h ../src/*.ui -ts qtparted_es.ts + lrelease qtparted_es.ts + +qtparted_fr.qm: + lupdate -verbose ../src/*.cpp ../src/*.h ../src/*.ui -ts qtparted_fr.ts + lrelease qtparted_fr.ts + +qtparted_it.qm: + lupdate -verbose ../src/*.cpp ../src/*.h ../src/*.ui -ts qtparted_it.ts + lrelease qtparted_it.ts + +qtparted_pl.qm: + lupdate -verbose ../src/*.cpp ../src/*.h ../src/*.ui -ts qtparted_pl.ts + lrelease qtparted_pl.ts + +qtparted_ru.qm: + lupdate -verbose ../src/*.cpp ../src/*.h ../src/*.ui -ts qtparted_ru.ts + lrelease qtparted_ru.ts + +qtparted_ua.qm: + lupdate -verbose ../src/*.cpp ../src/*.h ../src/*.ui -ts qtparted_ua.ts + lrelease qtparted_ua.ts + +qtparted_ca.qm: + lupdate -verbose ../src/*.cpp ../src/*.h ../src/*.ui -ts qtparted_ca.ts + lrelease qtparted_ca.ts + +%.ts: %.qm + lrelease *.qm +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: -$(top_builddir)/ts/Makefile: $(top_builddir)/config.status $(top_srcdir)/ts/Makefile.in - cd $(top_builddir) && $(SHELL) ./config.status ts/Makefile +#>+ 2 +KDE_DIST=qtparted_de.ts qtparted_ca.ts qtparted_it.ts qtparted_es.ts qtparted_fr.ts qtparted_ua.ts qtparted_ru.ts qtparted_pl.ts qtparted_cs.ts Makefile.in qtparted_fi.ts -all: $(top_builddir)/ts/Makefile -final: - @echo no programs available to recreate as final. Call in subdirs +#>+ 2 +docs-am: -.PHONY: all final +#>+ 6 +force-reedit: + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu ts/Makefile + cd $(top_srcdir) && perl admin/am_edit ts/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-am + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck --- qtparted-0.4.5.orig/ts/qtparted_es.ts +++ qtparted-0.4.5/ts/qtparted_es.ts @@ -3,7 +3,7 @@ command not found - orden no encontrada + orden no encontrada @@ -45,6 +45,11 @@ An error has happened during ped_disk_delete_partition call. Ha ocurrido un error durante la llamada a ped_disk_delete_partition. + + command not found + orden no encontrada + + QObject --- qtparted-0.4.5.orig/ts/qtparted_cs.ts +++ qtparted-0.4.5/ts/qtparted_cs.ts @@ -3,7 +3,7 @@ command not found - příkaz nenalezen + příkaz nenalezen @@ -44,6 +44,10 @@ An error has happened during ped_disk_delete_partition call. Během volání funkce ped_disk_delete_partition se vyskytla chyba. + + command not found + příkaz nenalezen + QObject --- qtparted-0.4.5.orig/ts/qtparted_de.ts +++ qtparted-0.4.5/ts/qtparted_de.ts @@ -3,7 +3,7 @@ command not found - Befehl nicht gefunden + Befehl nicht gefunden @@ -44,6 +44,10 @@ An error has happened during ped_disk_delete_partition call. Bei ped_disk_delete_partition ist ein Fehler aufgetreten. + + command not found + Befehl nicht gefunden + QObject --- qtparted-0.4.5.orig/ts/qtparted_pl.ts +++ qtparted-0.4.5/ts/qtparted_pl.ts @@ -3,7 +3,7 @@ command not found - Nie odnaleziono komendy + Nie odnaleziono komendy @@ -44,6 +44,10 @@ An error has happened during ped_disk_delete_partition call. Wystąpił błąd podczas wywołania ped_disk_delete_partition. + + command not found + Nie odnaleziono komendy + QObject --- qtparted-0.4.5.orig/ts/qtparted_ua.ts +++ qtparted-0.4.5/ts/qtparted_ua.ts @@ -3,7 +3,7 @@ command not found - команди не знайдено + команди не знайдено @@ -44,6 +44,10 @@ An error has happened during ped_disk_delete_partition call. Виникла помилка під час виклику ped_disk_delete_partition. + + command not found + команди не знайдено + QObject --- qtparted-0.4.5.orig/ts/qtparted_ru.ts +++ qtparted-0.4.5/ts/qtparted_ru.ts @@ -3,7 +3,7 @@ command not found - команда не найдена + команда не найдена @@ -44,6 +44,10 @@ An error has happened during ped_disk_delete_partition call. Произошла ошибка во время вызова ped_disk_delete_partition. + + command not found + команда не найдена + QObject --- qtparted-0.4.5.orig/debian/copyright +++ qtparted-0.4.5/debian/copyright @@ -0,0 +1,22 @@ +This package was debianized by Vanni Brutto on +Sun, 26 Jan 2003 20:29:44 +0100. + +It was downloaded from http://qtparted.sourceforge.net + +Upstream Author: Vanni Brutto + +This software is copyright (c) 2004 by Vanni Brutto . + +You are free to distribute this software under the terms of +the GNU General Public License. +On Debian systems, the complete text of the GNU General Public +License can be found in /usr/share/common-licenses/GPL file. + + + As a special exception, Justin Karneges gives permission to link + this program with the Qt Library (commercial or non-commercial edition), + and distribute the resulting executable, without including the source + code for the Qt library in the source distribution. + + As a special exception, Justin Karneges gives permission to link + this program with the OpenSSL Library. --- qtparted-0.4.5.orig/debian/control +++ qtparted-0.4.5/debian/control @@ -0,0 +1,17 @@ +Source: qtparted +Section: x11 +Priority: optional +Maintainer: Ubuntu Core Developers +XSBC-Original-Maintainer: Fabian Franz +Uploaders: Frank Lichtenheld +Homepage: http://qtparted.sourceforge.net +Build-Depends: debhelper (>> 5.0.0), libqt3-mt-dev (>= 3.1.1), libparted1.7-dev, gawk (>= 3.0), grep (>= 2.4), jfsutils (>= 1.1.1), ntfsprogs (>= 1.7.1), xfsprogs (>= 2.4.12), libuuid1 (>= 1.34), uuid-dev (>= 1.2), dpatch +Standards-Version: 3.7.3 + +Package: qtparted +Architecture: any +Depends: ${shlibs:Depends} +Recommends: parted (>= 1.6.6), e2fsprogs (>= 1.2), jfsutils (>= 1.1.1), ntfsprogs (>= 1.7.1), xfsprogs (>= 2.4.12) +Description: A parted frontend using QT + QTParted is a Partition Magic clone writen using C++. + It is based on libparted and QT toolkit. --- qtparted-0.4.5.orig/debian/docs +++ qtparted-0.4.5/debian/docs @@ -0,0 +1,4 @@ +doc/README +doc/BUGS +AUTHORS +doc/TODO.txt --- qtparted-0.4.5.orig/debian/compat +++ qtparted-0.4.5/debian/compat @@ -0,0 +1 @@ +5 --- qtparted-0.4.5.orig/debian/patches/00list +++ qtparted-0.4.5/debian/patches/00list @@ -0,0 +1,7 @@ +kubuntu_01_branch_patch.dpatch +kubuntu_02_installer_mode.dpatch +kubuntu_03_fix_desktop_file.dpatch +kubuntu_04_libparted17.dpatch +kubuntu_05_german.dpatch +kubuntu_06_english.dpatch +kubuntu_07_root_is_sudo.dpatch --- qtparted-0.4.5.orig/debian/patches/kubuntu_05_german.dpatch +++ qtparted-0.4.5/debian/patches/kubuntu_05_german.dpatch @@ -0,0 +1,1080 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## kubuntu_05_german.dpatch by Siegfried-Angel Gevatter Pujals (RainCT) +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Fix mistakes in German translation, thanks to Christian A. Reiter. + +@DPATCH@ +diff -urNad qtparted-0.4.5~/ts/qtparted_de.ts qtparted-0.4.5/ts/qtparted_de.ts +--- qtparted-0.4.5~/ts/qtparted_de.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_de.ts 2007-12-10 19:13:20.000000000 +0100 +@@ -95,7 +95,7 @@ + + + Cannot umount partition device: %1.Please do it by hand first to commit the changes! +- Kann eingebindene Partition nicht lösen: %1. Bitte diese manuell lösen um die Änderungen zu übernehmen! ++ Kann eingebundene Partition nicht lösen: %1. Bitte diese manuell lösen um die Änderungen zu übernehmen! + + + Utility for mount a filesystem. +@@ -311,7 +311,7 @@ + + + This is a virtual partition. You cannot alter it: use undo instead. +- Dies ist eine virtuelle Partition, diese läßt sich nicht ändern: nehmen sie die änderungen an ihr stattdessen zurück. ++ Dies ist eine virtuelle Partition, diese lässt sich nicht ändern: nehmen sie die Änderungen an ihr stattdessen zurück. + + + A bug was found in QTParted during "resize" scan, please report it! +@@ -544,7 +544,7 @@ + + + This is a virtual partition. You cannot alter it: use undo instead. +- Dies ist eine virtuelle Partition, diese läßt sich nicht ändern: nehmen sie die änderungen an ihr stattdessen zurück. ++ Dies ist eine virtuelle Partition, diese lässt sich nicht ändern: nehmen sie die Änderungen an ihr stattdessen zurück. + + + primary +@@ -706,7 +706,7 @@ + QP_PartInfo + + This is a virtual partition. You cannot alter it: use undo instead. +- Dies ist eine virtuelle Partition, diese läßt sich nicht ändern: nehmen sie die änderungen an ihr stattdessen zurück. ++ Dies ist eine virtuelle Partition, diese lässt sich nicht ändern: nehmen sie die Änderungen an ihr stattdessen zurück. + + + Bug during mkfs! Cannot format virtual partitions! +diff -urNad qtparted-0.4.5~/ts/qtparted_de.ts.orig qtparted-0.4.5/ts/qtparted_de.ts.orig +--- qtparted-0.4.5~/ts/qtparted_de.ts.orig 1970-01-01 01:00:00.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_de.ts.orig 2007-12-10 18:36:34.000000000 +0100 +@@ -0,0 +1,1030 @@ ++ ++ ++ ++ ++ command not found ++ Befehl nicht gefunden ++ ++ ++ ++ @default ++ ++ Operation successfully completed. ++ Aktion erfolgreich beendet. ++ ++ ++ An error has occurs during the operation. ++ Bei der Aktion ist ein Fehler aufgetreten. ++ ++ ++ An error has happened during the ped_disk_new call. ++ Bei ped_disk_new ist ein Fehler aufgetreten. ++ ++ ++ An error has happened during the ped_disk_get_partition call. ++ Bei ped_disk_get_partition ist ein Fehler aufgetreten. ++ ++ ++ An error has happened during ped_partition_new call. ++ Bei ped_partition_call ist ein Fehler aufgetreten. ++ ++ ++ An error has happened during ped_disk_add_partition call. ++ Bei ped_disk_add_partition ist ein Fehler aufgetreten. ++ ++ ++ An error has happened during ped_partition_set_system call. ++ Bei ped_partition_set_system ist ein Fehler aufgetreten. ++ ++ ++ An error has happened during ped_partition_set_flag call. ++ Bei ped_partition_set_flag ist ein Fehler aufgetreten. ++ ++ ++ An error has happened during ped_disk_delete_partition call. ++ Bei ped_disk_delete_partition ist ein Fehler aufgetreten. ++ ++ ++ command not found ++ Befehl nicht gefunden ++ ++ ++ ++ QObject ++ ++ A program that create NTFS partitions. ++ Ein Programm, das NTFS-Partitionen erstellt. ++ ++ ++ A program that resize NTFS partitions. ++ Ein Programm, das die Größe von NTFS-Partitionen verändert. ++ ++ ++ A program that create EXT3 partitions. ++ ein Programm, das EXT3-Partitionen erzeugt. ++ ++ ++ A program that create JFS partitions. ++ Ein Programm, das JFS-Partitionen erzeugt. ++ ++ ++ A program that create XFS partitions. ++ Ein Programm, das XFS-Partitionen erzeugt. ++ ++ ++ Cannot read /proc/partitions, QTParted cannot be used!. ++Please use a kernel with /proc/partitions support. ++ Kann /proc/partitions nicht lesen, QTParted kann nicht benutzt werden! ++Bitte benutzen sie einen Kernel, der /proc/partitions unterstützt. ++ ++ ++ Cannot get parted version. ++ Kann die Version von parted nicht ermitteln. ++ ++ ++ Parted is too old: ++- installed parted version: %1.%2.%3 ++- required parted version: %4.%5.%6 (or better) ++ ++Parted homepage: http://www.gnu.org/software/parted/ ++ Das Programm parted ist zu alt: ++- installierte parted Version: %1.%2.%3 ++- erforderliche parted Version: %4.%5.%6 (or better) ++ ++homepage von parted: http://www.gnu.org/software/parted/ ++ ++ ++ Cannot umount partition device: %1.Please do it by hand first to commit the changes! ++ Kann eingebindene Partition nicht lösen: %1. Bitte diese manuell lösen um die Änderungen zu übernehmen! ++ ++ ++ Utility for mount a filesystem. ++ ++ ++ ++ Utility for umount a filesystem. ++ ++ ++ ++ Utility for grow a xfs filesystem. ++ ++ ++ ++ ++ QP_ActionList ++ ++ Getting info about partition %1. ++ Ermittle Informationen über Partition %1. ++ ++ ++ Creating partition. ++ Erstelle Partition. ++ ++ ++ Preparation for removing a partition. ++ Vorbereiten, um eine Partition zu löschen. ++ ++ ++ Removing a partition. ++ Lösche eine Partition. ++ ++ ++ Preparation for resizing a partition. ++ Vorbereiten, um die Größe einer Partition zu ändern. ++ ++ ++ Resizing a partition. ++ Größe einer Partition ändern. ++ ++ ++ Preparation for activating a partition. ++ Vorbereiten, um eine Partition zu aktivieren. ++ ++ ++ Activating a partition. ++ Aktiviere eine Partition. ++ ++ ++ Preparation for formatting a partition. ++ Vorbereiten, um eine Partition zu formatieren. ++ ++ ++ Formatting a partition. ++ Formatiere eine Partition. ++ ++ ++ Rescan of the disk. ++ Das Laufwerk neu einlesen. ++ ++ ++ Preparation for moving a partition. ++ Vorbereiten, um eine Partition zu verschieben. ++ ++ ++ Moving a partition. ++ Eine Partition verschieben. ++ ++ ++ All operations completed. ++ Alle Aktionen beendet. ++ ++ ++ Critical error during ped_disk_new! ++ ++ ++ ++ Critical error during ped_disk_duplicate! ++ ++ ++ ++ Preparation for hiding a partition. ++ ++ ++ ++ Hiding a partition. ++ ++ ++ ++ ++ QP_DriveList ++ ++ No device found. Maybe you're not using root user? ++ Kein Gerät gefunden. Sind sie wirklich root? ++ ++ ++ Device ++ Gerät ++ ++ ++ Disks ++ Laufwerke ++ ++ ++ ++ QP_FSExt3 ++ ++ Writing superblocks and filesystem. ++ schreibe Superblock und Dateisystem. ++ ++ ++ Writing inode tables. ++ schreibe Dateizuordnungstabelle. ++ ++ ++ There was a problem with mkfs.ext3. ++ ++ ++ ++ ++ QP_FSJfs ++ ++ Cannot enlarge a partition if the disk device is busy ++ Kann keine Partition vergrößern, solange das Laufwerk beschäftigt ist ++ ++ ++ ++ QP_FSNtfs ++ ++ Cannot enlarge a partition if the disk device is busy ++ Kann keine Partition vergrößern, solange das Laufwerk beschäftigt ist ++ ++ ++ Resizing in progress. ++ ++ ++ ++ Syncing device. ++ ++ ++ ++ ++ QP_FSReiserFS ++ ++ No label ++ ++ ++ ++ ++ QP_FSXfs ++ ++ There was a problem with mkfs.xfs. ++ ++ ++ ++ Cannot enlarge a partition if the disk device is busy ++ Kann keine Partition vergrößern, solange das Laufwerk beschäftigt ist ++ ++ ++ Error during xfs_grow. ++ ++ ++ ++ ++ QP_LibParted ++ ++ The partition is mounted. ++ Die Partition ist eingebunden. ++ ++ ++ Can't move extended partitions. ++ Erweitere Partitionen können nicht verschoben werden. ++ ++ ++ Can't move a partition onto itself. Try using resize, perhaps? ++ Eine Partition kann nicht auf sich selbst verschoben werden. Wollen die die Größe ändern? ++ ++ ++ An error happen during ped_geometry_init call. ++ Bei ped_geometry_init ist ein Fehler aufgetreten. ++ ++ ++ An error happen during ped_disk_set_partition_geom call. ++ Bei ped_disk_set_partition_geom ist ein Fehler augetreten. ++ ++ ++ An error happen during ped_file_system_open call. ++ Bei ped_file_system_open ist ein Fehler aufgetreten. ++ ++ ++ An error happen during ped_file_system_resize call. ++ Bei ped_file_system_resize ist ein Fehler aufgetreten. ++ ++ ++ Scanning all disk partitions. ++ Scanne alle Laufwerks-Partitionen. ++ ++ ++ Partition %s is being used. ++ Partition %s wird benutzt. ++ ++ ++ Cannot change the active status on this partition ++ Kann den Aktivierungs-Status dieser Partition nicht ändern ++ ++ ++ A bug was found in QTParted during set_system, please report it! ++ Während set_system wurde ein Fehler in QTParted gefunden, bitte diesen melden! ++ ++ ++ A bug was found in QTParted during ped_file_system_type_get, please report it! ++ Während ped_file_system_type_get wurde ein Fehler in QTParted gefunden, bitte diesen melden! ++ ++ ++ This is a virtual partition. You cannot alter it: use undo instead. ++ Dies ist eine virtuelle Partition, diese läßt sich nicht ändern: nehmen sie die änderungen an ihr stattdessen zurück. ++ ++ ++ A bug was found in QTParted during "resize" scan, please report it! ++ Während "resize" wurde ein Fehler in QTParted gefunden, bitte diesen melden! ++ ++ ++ A bug was found in QTParted during "mkfs" scan, please report it! ++ Während "mkfs" wurde ein Fehler in QTParted gefunden, bitte diesen melden! ++ ++ ++ Error committing device. ++This can happen when a device is mounted in the disk. ++Try to unmount all partitions on this disk. ++Please read the FAQ for this kind of error! ++ Fehler beim Übernehmen des Gerätes. ++Dies kann passieren, wenn ein Laufwerk eingebunden ist. ++Versuchen Sie alle Laufwerksverbindungen zu diesem Laufwerk zu lösen. ++Bitte lesen sie die FAQ für diese Art von Fehlern! ++ ++ ++ A bug was found in QTParted during "move" scan, please report it! ++ Während des "move" scans wurde ein Fehler in QTParted gefunden, bitte diesen melden! ++ ++ ++ Cannot change the hidden status on this partition ++ ++ ++ ++ ++ QP_MainWindow ++ ++ &Quit ++ &Beenden ++ ++ ++ Quit ++ Beenden ++ ++ ++ Quit from the application ++ Dieses Programm beenden ++ ++ ++ &Property ++ &Eigenschaften ++ ++ ++ Property ++ Eigenschaften ++ ++ ++ Property of the selected partition ++ Die Eigenschaften der gewählten Partition ++ ++ ++ &Create ++ &Erstellen ++ ++ ++ Create a new partition ++ Eine neue Partition erstellen ++ ++ ++ &Resize ++ &Größe ändern ++ ++ ++ Resize ++ Größe ändern ++ ++ ++ Resize a partition ++ Größe einer Partition ändern ++ ++ ++ &Move ++ &Verschieben ++ ++ ++ Move ++ Verschieben ++ ++ ++ Move a partition ++ Eine Partition verschieben ++ ++ ++ &Delete ++ &Löschen ++ ++ ++ Delete ++ Löschen ++ ++ ++ Delete a new partition ++ Eine neue Partition Löschen ++ ++ ++ &File ++ &Datei ++ ++ ++ &Operations ++ &Aktionen ++ ++ ++ this is a %1 partition ++it start at: %2 and end at: %3 ++it can grow left: %4 and right: %5 ++the filesystem is: %6 ++ Dies ist eine %1 Partition. ++Sie beginnt bei %2 und endet bei %3 ++Sie kann nach links bis %4 wachsen, nach rechts bis %5 ++Das Dateisystem ist %6 ++ ++ ++ Enter <b>What's This</b> modeIt enables the user to ask for help about widgets on the screen. ++ Der <b>Was ist das</b>-Modus ermöglicht dem Benutzer nach Hilfe zu bestimmten Elementen auf dem Bildschirm zu fragen. ++ ++ ++ Create ++ Erstellen ++ ++ ++ What's &This ++ Was ist &das ++ ++ ++ What's This ++ Was ist das ++ ++ ++ About QT ++ Über QT ++ ++ ++ Information about QT ++ Informationen über QT ++ ++ ++ &Help ++ &Hilfe ++ ++ ++ About &QTParted ++ Über &QTParted ++ ++ ++ About QTParted ++ Über QTParted ++ ++ ++ Information about QTParted ++ Informationen über QTParted ++ ++ ++ About Q&T ++ Über Q&T ++ ++ ++ About ++ Über ++ ++ ++ An internal error happened during partition scan. ++This means that you cannot resize or move this partition. ++ Beim Analysieren der Partition trat in interner Fehler auf ++Dies bedeutet, dass Sie diese Partition nicht verändern können. ++ ++ ++ Getting devices ++ Ermittle Geräte ++ ++ ++ load user settings ++ Lade Benutzereinstellungen ++ ++ ++ Ready ++ Bereit ++ ++ ++ &Undo ++ &Zurücknehmen ++ ++ ++ Undo ++ Zurücknehmen ++ ++ ++ Undo last operation ++ Die letzte Aktion zurücknehmen ++ ++ ++ &Commit ++ &Durchführen ++ ++ ++ Commit ++ Durckführen ++ ++ ++ Commit all operations ++ Alle Aktionen durchführen ++ ++ ++ &Configuration... ++ &Einrichten... ++ ++ ++ Configuration of QTParted ++ QTParted einrichten ++ ++ ++ Open the configuration dialog ++ Öffnet den Einrichtungs-Dialog ++ ++ ++ Set Active... ++ Aktiv setzen... ++ ++ ++ &Disks ++ &Laufwerke ++ ++ ++ &Options ++ &Optionen ++ ++ ++ This is a virtual partition. You cannot alter it: use undo instead. ++ Dies ist eine virtuelle Partition, diese läßt sich nicht ändern: nehmen sie die änderungen an ihr stattdessen zurück. ++ ++ ++ primary ++ primär ++ ++ ++ logical ++ logisch ++ ++ ++ extended ++ erweitert ++ ++ ++ (No Active on Drive) ++ (Nicht aktiv auf dem Laufwerk) ++ ++ ++ Currently active partition: %1 ++Change active partition to: %2 ++ ++Are you sure you want to change the active partition? ++ Aktuell aktive Partition: %1 ++Ändere aktive Partition zu: %2 ++ ++Sind Sie sicher, dass Sie die aktive Partition ändern wollen? ++ ++ ++ &Format ++ &Formatieren ++ ++ ++ Format ++ Formatieren ++ ++ ++ Format a new partition ++ Eine Partition formatieren ++ ++ ++ &Device property ++ &Geräteeigenschaften ++ ++ ++ &Make a new Partition Table ++ &Erstelle eine neue Partitionstabelle ++ ++ ++ This will make the partition table ++ Eine neue Partitionstabelle erstellen ++ ++ ++ You're going to loose all partition data! Are you sure? :) ++ Sie verlieren alle Partitions-Daten mit dieser Aktion! Wollen Sie das wirklich? :) ++ ++ ++ detected ++ gefunden ++ ++ ++ none ++ keine ++ ++ ++ You're going to make a new partition table. Are you sure? ++All data will be lost! ++ Sie sind dabei eine neue Partitionstabelle zu erstellen. Sind Sie sicher? ++Alle Daten sind dann verloren! ++ ++ ++ It was not possible to make a new partition table. ++ Es war nicht möglich, eine neue Partitionstabelle zu erstellen. ++ ++ ++ Device status: readonly. ++ Gerätestatus: nur lesen. ++ ++ ++ Device status: busy. ++ Gerätestatus: beschäftigt. ++ ++ ++ Device status: available. ++ Gerätestatus: verfügbar. ++ ++ ++ You're commiting all changes. Warning, you can lost data! ++Make sure also that you're not commiting a busy device... ++In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++ Sie übernehmen alle Änderungen. Warnung, Sie können Daten verlieren! ++Stellen Sie sicher, dass Sie keine Änderungen an beschäftigten Geräte übernehmen... ++In anderen Worten, BITTE ALLE LAUFWERKSVERBINDUNGEN ZU DIESEM LAUFWERK LÖSEN, bevor Sie die Änderungen übernehmen! ++ ++ ++ &Device ++ &Gerät ++ ++ ++ See the property of this disk device ++ Beachten Sie die Eigenschaften dieses Laufwerkes ++ ++ ++ Some information about the disk device ++ EInige Informationen über dieses Laufwerk ++ ++ ++ Hide ++ ++ ++ ++ ++ QP_NavView ++ ++ The following drives have been detected: ++ Die folgenden Laufwerke wurden gefunden: ++ ++ ++ Drive Info ++ Laufwerks-Informationen ++ ++ ++ Device: ++ Gerät: ++ ++ ++ Model: ++ Modell: ++ ++ ++ Capacity (Mb): ++ Gesamtgröße (MB): ++ ++ ++ Length sectors: ++ Sektoren: ++ ++ ++ No Drive Selected ++ Kein Laufwerk ausgewählt ++ ++ ++ Status: ++ Status: ++ ++ ++ readonly. ++ nur lesen. ++ ++ ++ busy. ++ beschäftigt. ++ ++ ++ available. ++ verfügbar. ++ ++ ++ ++ QP_PartInfo ++ ++ This is a virtual partition. You cannot alter it: use undo instead. ++ Dies ist eine virtuelle Partition, diese läßt sich nicht ändern: nehmen sie die änderungen an ihr stattdessen zurück. ++ ++ ++ Bug during mkfs! Cannot format virtual partitions! ++ Fehler bei mkfs! Kann keine virtuellen Partitionen formatieren! ++ ++ ++ Cannot enlarge a partition if the disk device is busy ++ Kann keine Partition vergrößern, solange das Laufwerk beschäftigt ist ++ ++ ++ ++ QP_RealListView ++ ++ Number ++ Nummer ++ ++ ++ Partition ++ Partition ++ ++ ++ Type ++ Typ ++ ++ ++ Start ++ Anfang ++ ++ ++ End ++ Ende ++ ++ ++ Status ++ Status ++ ++ ++ Size ++ Größe ++ ++ ++ Used space ++ Benutzer Platz ++ ++ ++ Active ++ Aktiv ++ ++ ++ N/A ++ N/A ++ ++ ++ Empty ++ Leer ++ ++ ++ Partition table ++ Partitionstabelle ++ ++ ++ Label ++ ++ ++ ++ Hidden ++ ++ ++ ++ ++ QP_UIConfig ++ ++ &OK ++ &OK ++ ++ ++ &Cancel ++ &Abbrechen ++ ++ ++ Configuration ++ Konfiguration ++ ++ ++ QTParted &layout ++ QTParted &Layout ++ ++ ++ Chart and ListBox ++ Diagramm und Liste ++ ++ ++ Only Chart ++ nur Diagramm ++ ++ ++ Only ListBox ++ nur Liste ++ ++ ++ &External Tools ++ &Externe Programme ++ ++ ++ &Full executable path ++ &Voller Programmpfad ++ ++ ++ ++ QP_UICreate ++ ++ Create partition ++ Partition erstellen ++ ++ ++ &Size: ++ &Größe: ++ ++ ++ Create &as: ++ Erstellen &als: ++ ++ ++ &Label: ++ &Name: ++ ++ ++ &Partition Type: ++ Partitions-&Typ: ++ ++ ++ Position ++ Position ++ ++ ++ &Beginning of unallocated space ++ &Anfang des freien Platzes ++ ++ ++ &End of unallocated space ++ &Ende des freien Platzes ++ ++ ++ Pe&rcent of unallocated space: ++ &Prozent des freien Platzes: ++ ++ ++ &OK ++ &OK ++ ++ ++ &Cancel ++ &Abbrechen ++ ++ ++ ++ QP_UIDeviceProperty ++ ++ Device property ++ Geräteeigenschaften ++ ++ ++ Device short name ++ Kurzer Gerätename ++ ++ ++ Device long name ++ Gerätename ++ ++ ++ &Close ++ S&chließen ++ ++ ++ ++ QP_UIFormat ++ ++ Format partition ++ Partition formatieren ++ ++ ++ &OK ++ &OK ++ ++ ++ &Cancel ++ &Abbrechen ++ ++ ++ &Partition Type: ++ &Partitionstyp: ++ ++ ++ &Label: ++ &Name: ++ ++ ++ ++ QP_UIProgress ++ ++ Progress ++ Fortschritt ++ ++ ++ Progress: ++ Fortschritt: ++ ++ ++ &OK ++ &OK ++ ++ ++ Current operation: ++ Aktuelle Aktion: ++ ++ ++ Time Left: ++ Verbleibende Zeit: ++ ++ ++ ++ QP_UIResize ++ ++ Resize partition ++ Größe der Partition ändern ++ ++ ++ Minimum Size: ++ Minimale Größe: ++ ++ ++ Free Space &Before: ++ Freier Platz &vorher: ++ ++ ++ New Size: ++ Neue Größe: ++ ++ ++ Free Space &After: ++ Freier Platz &danach: ++ ++ ++ It is recommended to backup your data before do this operation! ++ Sie sollten ihre Daten vor dieser Aktion sichern! ++ ++ ++ &OK ++ &OK ++ ++ ++ &Cancel ++ &Abbrechen ++ ++ ++ ++ QP_dlgAbout ++ ++ &OK ++ &OK ++ ++ ++ ++ QP_dlgCreate ++ ++ This filesystem cannot be greater of %1 ++ Dieses Dateisystem kann nicht Größer als %1 sein ++ ++ ++ ++ QP_dlgDevProperty ++ ++ Devfs is enabled. ++ devfs ist aktiviert. ++ ++ ++ Devfs is disabled. ++ devfs ist inaktiv. ++ ++ ++ Partition table: %1 ++ Partitionstabelle: %1 ++ ++ ++ ++ QP_dlgProgress ++ ++ Initializing ++ Initialisiere ++ ++ ++ Time Left: %1 ++ Verbleibende Zeit: %1 ++ ++ ++ Operation: %1 of %2. ++Current operation: %3 ++ Aktion %1 von %2. ++Aktuelle Aktion: %3 ++ ++ ++ Operations completed sucessfully. ++ Aktionen erfolgreich beendet. ++ ++ ++ ++ QP_dlgResize ++ ++ Resize partition ++ Größe der Partition ändern ++ ++ ++ Minimum Size: %1 MB ++ Minimale Größe: %1 MB ++ ++ ++ Move partition ++ Partition verschieben ++ ++ ++ --- qtparted-0.4.5.orig/debian/patches/kubuntu_06_english.dpatch +++ qtparted-0.4.5/debian/patches/kubuntu_06_english.dpatch @@ -0,0 +1,285 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## kubuntu_06_english.dpatch by Siegfried-Angel Gevatter Pujals (RainCT) +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Fix mistakes in English strings. + +@DPATCH@ +diff -urNad qtparted-0.4.5~/debian/patches/kubuntu_02_installer_mode.dpatch qtparted-0.4.5/debian/patches/kubuntu_02_installer_mode.dpatch +--- qtparted-0.4.5~/debian/patches/kubuntu_02_installer_mode.dpatch 2007-12-10 19:19:25.000000000 +0100 ++++ qtparted-0.4.5/debian/patches/kubuntu_02_installer_mode.dpatch 2007-12-10 19:32:19.000000000 +0100 +@@ -376,7 +376,7 @@ + + -void QP_MainWindow::slotCommit() { + +bool QP_MainWindow::slotCommit() { +- QString label = QString(tr("You're commiting all changes. Warning, you can lost data!\n" ++ QString label = QString(tr("Warning: You're committing all changes. You can lose data!\n" + "Make sure also that you're not commiting a busy device...\n" + "In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes!")); + @@ -1002,9 +1095,9 @@ +diff -urNad qtparted-0.4.5~/src/qp_window.cpp qtparted-0.4.5/src/qp_window.cpp +--- qtparted-0.4.5~/src/qp_window.cpp 2005-08-10 13:05:37.000000000 +0200 ++++ qtparted-0.4.5/src/qp_window.cpp 2007-12-10 19:53:38.000000000 +0100 +@@ -748,8 +748,8 @@ + type=tr("extended"); + + label = QString(tr("this is a %1 partition\n" +- "it start at: %2 and " +- "end at: %3\n" ++ "it starts at: %2 and " ++ "ends at: %3\n" + "it can grow left: %4 and " + "right: %5\n" + "the filesystem is: %6")) +@@ -989,9 +989,9 @@ + } + + void QP_MainWindow::slotCommit() { +- QString label = QString(tr("You're commiting all changes. Warning, you can lost data!\n" ++ QString label = QString(tr("Warning: You're committing all changes. You can lose data!\n" + "Make sure also that you're not commiting a busy device...\n" +- "In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes!")); ++ "In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes!")); + + QMessageBox mb(PROG_NAME, + label, +diff -urNad qtparted-0.4.5~/ts/qtparted_ca.ts qtparted-0.4.5/ts/qtparted_ca.ts +--- qtparted-0.4.5~/ts/qtparted_ca.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_ca.ts 2007-12-10 19:54:05.000000000 +0100 +@@ -425,7 +425,7 @@ + + + this is a %1 partition +-it start at: %2 and end at: %3 ++it starts at: %2 and ends at: %3 + it can grow left: %4 and right: %5 + the filesystem is: %6 + aquesta és una partició %1 +@@ -636,9 +636,9 @@ + Estat del dispositiu: disponbile. + + +- You're commiting all changes. Warning, you can lost data! ++ Warning: You're committing all changes. You can lose data! + Make sure also that you're not commiting a busy device... +-In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes! + Està a punto de realitzar tots els canvis. Advertiment: ¡pot perdre dades! + Asseguri's també de que no farà els canvis sobre un dispositiu ocupat... + En altres paraules, ¡SI US PLAU, DESMUNTI TOTES LES PARTICIONS abans d'efectuar els canvis! +diff -urNad qtparted-0.4.5~/ts/qtparted_cs.ts qtparted-0.4.5/ts/qtparted_cs.ts +--- qtparted-0.4.5~/ts/qtparted_cs.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_cs.ts 2007-12-10 19:54:05.000000000 +0100 +@@ -420,7 +420,7 @@ + + + this is a %1 partition +-it start at: %2 and end at: %3 ++it starts at: %2 and ends at: %3 + it can grow left: %4 and right: %5 + the filesystem is: %6 + Toto je oddíl %1 +@@ -631,9 +631,9 @@ + Stav zařízení: dostupné. + + +- You're commiting all changes. Warning, you can lost data! ++ Warning: You're committing all changes. You can lose data! + Make sure also that you're not commiting a busy device... +-In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes! + Chystáte se potvrdit všechny změny. Pozor, můžete přijít o všechna data! + Ujistěte se, že neprovádíte změny na disku, který je zaneprázdněn... + Před potvrzením změn raději ODPOJTE VŠECHNY DISKOVÉ ODDÍLY! +diff -urNad qtparted-0.4.5~/ts/qtparted_de.ts qtparted-0.4.5/ts/qtparted_de.ts +--- qtparted-0.4.5~/ts/qtparted_de.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_de.ts 2007-12-10 19:54:05.000000000 +0100 +@@ -420,7 +420,7 @@ + + + this is a %1 partition +-it start at: %2 and end at: %3 ++it starts at: %2 and ends at: %3 + it can grow left: %4 and right: %5 + the filesystem is: %6 + Dies ist eine %1 Partition. +@@ -631,9 +631,9 @@ + Gerätestatus: verfügbar. + + +- You're commiting all changes. Warning, you can lost data! ++ Warning: You're committing all changes. You can lose data! + Make sure also that you're not commiting a busy device... +-In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes! + Sie übernehmen alle Änderungen. Warnung, Sie können Daten verlieren! + Stellen Sie sicher, dass Sie keine Änderungen an beschäftigten Geräte übernehmen... + In anderen Worten, BITTE ALLE LAUFWERKSVERBINDUNGEN ZU DIESEM LAUFWERK LÖSEN, bevor Sie die Änderungen übernehmen! +diff -urNad qtparted-0.4.5~/ts/qtparted_es.ts qtparted-0.4.5/ts/qtparted_es.ts +--- qtparted-0.4.5~/ts/qtparted_es.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_es.ts 2007-12-10 19:54:05.000000000 +0100 +@@ -425,7 +425,7 @@ + + + this is a %1 partition +-it start at: %2 and end at: %3 ++it starts at: %2 and ends at: %3 + it can grow left: %4 and right: %5 + the filesystem is: %6 + ésta es una partición %1 +@@ -636,9 +636,9 @@ + Estado del dispositivo: disponbile. + + +- You're commiting all changes. Warning, you can lost data! ++ Warning: You're committing all changes. You can lose data! + Make sure also that you're not commiting a busy device... +-In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes! + Va a efectuar todos los cambios. Advertencia: ¡puede perder datos! + Asegúrese también de qué no va a hacer los cambios sobre un dispositivo ocupado... + En otras palabras, ¡POR FAVOR DESMONTE TODAS LAS PARTICIONES antes de efectuar los cambios! +diff -urNad qtparted-0.4.5~/ts/qtparted_fi.ts qtparted-0.4.5/ts/qtparted_fi.ts +--- qtparted-0.4.5~/ts/qtparted_fi.ts 2005-02-04 14:40:52.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_fi.ts 2007-12-10 19:54:05.000000000 +0100 +@@ -417,7 +417,7 @@ + + + this is a %1 partition +-it start at: %2 and end at: %3 ++it starts at: %2 and ends at: %3 + it can grow left: %4 and right: %5 + the filesystem is: %6 + Tämä on %1 osio. +@@ -629,9 +629,9 @@ + Laitteen tila: Käytettävissä. + + +- You're commiting all changes. Warning, you can lost data! ++ Warning: You're committing all changes. You can lose data! + Make sure also that you're not commiting a busy device... +-In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes! + Olet toteuttamassa kaikki tekemäsi muutokset. Varoitus: voit menettää tietoja! + Varmista, ettet yritä toteuttaa muutoksia käytössä olevalle laitteelle... + Toisin sanoen, OLE HYVÄ JA IRROTA (UNMOUNT) KAIKKI OSIOT ennen kuin jatkat! +diff -urNad qtparted-0.4.5~/ts/qtparted_fr.ts qtparted-0.4.5/ts/qtparted_fr.ts +--- qtparted-0.4.5~/ts/qtparted_fr.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_fr.ts 2007-12-10 19:54:05.000000000 +0100 +@@ -421,7 +421,7 @@ + + + this is a %1 partition +-it start at: %2 and end at: %3 ++it starts at: %2 and ends at: %3 + it can grow left: %4 and right: %5 + the filesystem is: %6 + Cette partition est une partition %1 +@@ -633,9 +633,9 @@ + État du périphérique : disponible. + + +- You're commiting all changes. Warning, you can lost data! ++ Warning: You're committing all changes. You can lose data! + Make sure also that you're not commiting a busy device... +-In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes! + Vous allez effectuer tous les changements. Attention, cela peut entrainer la perte de données ! + Assurez-vous que le périphérique ne soit pas occupé... + En d'autres termes, MERCI DE DEMONTER TOUTES LES PARTITIONS avant d'effectuer les changements ! +diff -urNad qtparted-0.4.5~/ts/qtparted_it.ts qtparted-0.4.5/ts/qtparted_it.ts +--- qtparted-0.4.5~/ts/qtparted_it.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_it.ts 2007-12-10 19:54:05.000000000 +0100 +@@ -420,7 +420,7 @@ + + + this is a %1 partition +-it start at: %2 and end at: %3 ++it starts at: %2 and ends at: %3 + it can grow left: %4 and right: %5 + the filesystem is: %6 + Questa è una partizione %1 +@@ -631,9 +631,9 @@ + Stato del dispositivo: disponibile. + + +- You're commiting all changes. Warning, you can lost data! ++ Warning: You're committing all changes. You can lose data! + Make sure also that you're not commiting a busy device... +-In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes! + Stai per applicare tutti i cambiamenti. Attenzione, potresti perdere dati! + Accertati di non applicare cambiamenti su dispositivi occupati... + In altre parole PER FAVORE SMONTA TUTTE LE PARTIZIONI prima di applicare cambiamenti! +diff -urNad qtparted-0.4.5~/ts/qtparted_pl.ts qtparted-0.4.5/ts/qtparted_pl.ts +--- qtparted-0.4.5~/ts/qtparted_pl.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_pl.ts 2007-12-10 19:54:05.000000000 +0100 +@@ -519,7 +519,7 @@ + + + this is a %1 partition +-it start at: %2 and end at: %3 ++it starts at: %2 and ends at: %3 + it can grow left: %4 and right: %5 + the filesystem is: %6 + To jest %1 partycja +@@ -633,9 +633,9 @@ + Status urządzenia: dostępny. + + +- You're commiting all changes. Warning, you can lost data! ++ Warning: You're committing all changes. You can lose data! + Make sure also that you're not commiting a busy device... +-In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes! + Potwierdzasz wszystkie zmiany. Uwaga, możesz utracić dane! + Upewnij się, czy nie potwierdzasz zmian na zajętym urządzeniu... + Innymi słowy ODMONTUJ WSZYSTKIE PARTYCJE zanim ostatecznie potwierdzisz zmiany! +diff -urNad qtparted-0.4.5~/ts/qtparted_ru.ts qtparted-0.4.5/ts/qtparted_ru.ts +--- qtparted-0.4.5~/ts/qtparted_ru.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_ru.ts 2007-12-10 19:54:05.000000000 +0100 +@@ -420,7 +420,7 @@ + + + this is a %1 partition +-it start at: %2 and end at: %3 ++it starts at: %2 and ends at: %3 + it can grow left: %4 and right: %5 + the filesystem is: %6 + Это %1 раздел. +@@ -631,9 +631,9 @@ + Статус устройства: свободно. + + +- You're commiting all changes. Warning, you can lost data! ++ Warning: You're committing all changes. You can lose data! + Make sure also that you're not commiting a busy device... +-In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes! + Вы применяете все изменения. Вы можете потерять данные! + Убедитесь, что вы не будуте использовать занятое устройство... + Другими словами, ПОЖАЛУЙСТА, ОТМОНТИРУЙТЕ ВСЕ РАЗДЕЛЫ перед из изменением! +diff -urNad qtparted-0.4.5~/ts/qtparted_ua.ts qtparted-0.4.5/ts/qtparted_ua.ts +--- qtparted-0.4.5~/ts/qtparted_ua.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_ua.ts 2007-12-10 19:54:05.000000000 +0100 +@@ -420,7 +420,7 @@ + + + this is a %1 partition +-it start at: %2 and end at: %3 ++it starts at: %2 and ends at: %3 + it can grow left: %4 and right: %5 + the filesystem is: %6 + Це %1 розділ. +@@ -631,9 +631,9 @@ + Статус пристрою: вільне. + + +- You're commiting all changes. Warning, you can lost data! ++ Warning: You're committing all changes. You can lose data! + Make sure also that you're not commiting a busy device... +-In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes! ++In other words, PLEASE UMOUNT ALL PARTITIONS before commiting changes! + Ви застосовуєте усі зміни. Ви можете втратити інформацію! + Упевніться в тому, що ви не будете використовувати зайнятий пристрій... + Іншими словами, БУДЬЛАСКА, ВІДМОНТУЙТЕ УСІ РОЗДІЛИ, перед тим як застосувати зміни! --- qtparted-0.4.5.orig/debian/patches/kubuntu_01_branch_patch.dpatch +++ qtparted-0.4.5/debian/patches/kubuntu_01_branch_patch.dpatch @@ -0,0 +1,3167 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## kubuntu_01_branch_patch.dpatch by Jonathan Riddell +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +@DPATCH@ +diff -urNad qtparted-0.4.5~/src/main.cpp qtparted-0.4.5/src/main.cpp +--- qtparted-0.4.5~/src/main.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/main.cpp 2006-03-01 20:53:21.489253104 +0000 +@@ -1,22 +1,22 @@ + /* +- qtparted - a frontend to libparted for manipulating disk partitions +- Copyright (C) 2002-2003 Vanni Brutto ++ qtparted - a frontend to libparted for manipulating disk partitions ++ Copyright (C) 2002-2003 Vanni Brutto + +- Vanni Brutto ++ Vanni Brutto + +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2 of the License, or +- (at your option) any later version. ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. + +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. + +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software +- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + /* About main.cpp +@@ -50,14 +50,14 @@ + + void print_usage(const char *program_name) { + cout << "Usage: " << program_name << " [OPTION]..." << endl +- << "A nice QT GUI for libparted" << endl << endl +- << "Options used by qtparted:" << endl +- << " -l, --log=value use 1 to enable log, 0 for disable it." << endl +- << " [default = 1])" << endl +- << " -h, --help Show this usage message" << endl +- << endl << endl +- << program_name << " by Zanac copyright 2003, (C) 2005 Ark Linux" << endl +- << "Send bug reports to bero@arklinux.org" << endl; ++ << "A nice QT GUI for libparted" << endl << endl ++ << "Options used by qtparted:" << endl ++ << " -l, --log=value use 1 to enable log, 0 for disable it." << endl ++ << " [default = 1])" << endl ++ << " -h, --help Show this usage message" << endl ++ << endl << endl ++ << program_name << " by Zanac copyright 2003, (C) 2005 Ark Linux" << endl ++ << "Send bug reports to bero@arklinux.org" << endl; + exit(EXIT_SUCCESS); + } + +@@ -69,108 +69,106 @@ + // from another QWS application (OPIE, Ark Linux installer, .....) - so we + // add a configure option to turn it off... + #if defined(Q_WS_QWS) && !defined(QWS_CLIENT) // Frame Buffer +- QApplication app(argc, argv, QApplication::GuiServer); ++ QApplication app(argc, argv, QApplication::GuiServer); + #else // X11 +- QApplication app(argc, argv); ++ QApplication app(argc, argv); + #endif // Q_WS_QWS + +- /*---program name ;)---*/ +- const char *program_name = argv[0]; ++ /*---program name ;)---*/ ++ const char *program_name = argv[0]; + +- int next_option; ++ int next_option; + +- /*---Flag log on/off, default 1 = on---*/ +- int iLog = 1; ++ /*---Flag log on/off, default 1 = on---*/ ++ int iLog = 1; + +- /*---valid short options---*/ +- const char *const short_options = "hl:"; ++ /*---valid short options---*/ ++ const char *const short_options = "hl:"; + +- /*---valid long options---*/ +- const struct option long_options[] = { +- { "help", 0, NULL, 'h' }, +- { "log", 1, NULL, 'l' }, +- { NULL, 0, NULL, 0 } // end of getopt array +- }; ++ /*---valid long options---*/ ++ const struct option long_options[] = { ++ { "help", 0, NULL, 'h' }, ++ { "log", 1, NULL, 'l' }, ++ { NULL, 0, NULL, 0 } // end of getopt array ++ }; + +- do { +- next_option = getopt_long(argc, +- argv, +- short_options, +- long_options, +- NULL); ++ do { ++ next_option = getopt_long(argc, ++ argv, ++ short_options, ++ long_options, ++ NULL); + +- switch (next_option) { +- case 'h': // -h ... --help +- print_usage(program_name); +- break; +- +- case 'l': // -l ... --log +- if (!sscanf(optarg, "%d", &iLog)) { +- printf("You must specify a numeric value.\n" +- "Parameter \"%s\" is not valid for --log\n\n", optarg); +- print_usage(program_name); +- } +- +- if ((iLog != 0) && (iLog != 1)) { +- printf("You must use 1/0 to set log on/off.\n" +- "Parameter \"%s\" is not valid for --log\n\n", optarg); +- print_usage(program_name); +- } ++ switch (next_option) { ++ case 'h': // -h ... --help ++ print_usage(program_name); ++ break; + +- break; +- +- case '?': // opzione invalida :( +- print_usage(program_name); ++ case 'l': // -l ... --log ++ if (!sscanf(optarg, "%d", &iLog)) { ++ printf("You must specify a numeric value.\n" ++ "Parameter \"%s\" is not valid for --log\n\n", optarg); ++ print_usage(program_name); ++ } + +- case -1: // opzioni concluse +- break; ++ if ((iLog != 0) && (iLog != 1)) { ++ printf("You must use 1/0 to set log on/off.\n" ++ "Parameter \"%s\" is not valid for --log\n\n", optarg); ++ print_usage(program_name); ++ } ++ break; ++ ++ case '?': // opzione invalida :( ++ print_usage(program_name); + +- default: // errore! inaspettato pure! +- abort(); +- } +- } while (next_option != -1); ++ case -1: // opzioni concluse ++ break; + +- /*---install translation file for application strings---*/ +- QTranslator *translator = new QTranslator(0); +- translator->load(QString(DATADIR "/locale/qtparted_") + QString(QTextCodec::locale())); +- app.installTranslator(translator); ++ default: // errore! inaspettato pure! ++ abort(); ++ } ++ } while (next_option != -1); + +- /*---initialize the debug system---*/ +- if (iLog) g_debug.open(); +- showDebug("QtParted debug logfile (http://qtparted.sf.net) version %s\n---------\n", VERSION); ++ /*---install translation file for application strings---*/ ++ QTranslator *translator = new QTranslator(0); ++ translator->load(QString(DATADIR "/locale/qtparted_") + QString(QTextCodec::locale())); ++ app.installTranslator(translator); + +- /*---check the Parted version---*/ +- if (!QP_LibParted::checkForParted()) +- return EXIT_FAILURE; ++ /*---initialize the debug system---*/ ++ if (iLog) g_debug.open(); ++ showDebug("QtParted debug logfile (http://qtparted.sf.net) version %s\n---------\n", VERSION); + +- /*---check if the kernel support devfs---*/ +- isDevfsEnabled(); ++ /*---check the Parted version---*/ ++ if (!QP_LibParted::checkForParted()) ++ return EXIT_FAILURE; + +- QP_Settings settings; ++ /*---check if the kernel support devfs---*/ ++ isDevfsEnabled(); + +- mainwindow = new QP_MainWindow(&settings, 0, "QP_MainWindow"); +- app.setMainWidget(mainwindow); ++ QP_Settings settings; + +- QSplashScreen *splash=new QSplashScreen(QPixmap(DATADIR "/pics/qtp_splash.png"), Qt::WType_Modal | Qt::WStyle_Customize | Qt::WStyle_NoBorder | Qt::WDestructiveClose); +- splash->connect(mainwindow, SIGNAL(sigSplashInfo(const QString &)), +- SLOT(message(const QString &))); +- splash->finish(mainwindow); +- splash->show(); ++ mainwindow = new QP_MainWindow(&settings, 0, "QP_MainWindow"); ++ app.setMainWidget(mainwindow); + +- mainwindow->init(); ++ QSplashScreen *splash=new QSplashScreen(QPixmap(DATADIR "/pics/qtp_splash.png"), Qt::WType_Modal | Qt::WStyle_Customize | Qt::WStyle_NoBorder | Qt::WDestructiveClose); ++ splash->connect(mainwindow, SIGNAL(sigSplashInfo(const QString &)), ++ SLOT(message(const QString &))); ++ splash->finish(mainwindow); ++ splash->show(); ++ ++ mainwindow->init(); + + #ifdef Q_WS_QWS // Frame Buffer +- mainwindow->showMaximized(); ++ mainwindow->showMaximized(); + #endif // Q_WS_QWS + ++ mainwindow->show(); + +- mainwindow->show(); +- +- bool rc = app.exec(); ++ bool rc = app.exec(); + +- delete mainwindow; ++ delete mainwindow; + +- if (iLog) g_debug.close(); ++ if (iLog) g_debug.close(); + +- return rc; ++ return rc; + } +diff -urNad qtparted-0.4.5~/src/qp_actlist.cpp qtparted-0.4.5/src/qp_actlist.cpp +--- qtparted-0.4.5~/src/qp_actlist.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_actlist.cpp 2006-03-01 20:53:21.492252648 +0000 +@@ -28,775 +28,753 @@ + #include "statistics.h" + + /*---type (move+resize), num, start, end---*/ +-QP_ActListItem::QP_ActListItem(QTParted::actType action, +- int num, +- PedSector start, +- PedSector end, +- PedGeometry geom, +- PedPartitionType part_type) { +- showDebug("%s", "actlistitem::actlistitem, move/resize\n"); +- +- _action = action; +- _num = num; +- _start = start; +- _end = end; +- _geom = geom; +- _part_type = part_type; ++QP_ActListItem::QP_ActListItem(QTParted::actType action, int num, ++ PedSector start, PedSector end, ++ PedGeometry geom, PedPartitionType part_type) ++ :_action(action),_num(num),_start(start), ++ _end(end),_geom(geom),_part_type(part_type) ++{ ++ showDebug("%s", "actlistitem::actlistitem, move/resize\n"); + } + + /*---type, num---*/ +-QP_ActListItem::QP_ActListItem(QTParted::actType action, +- int num) { +- showDebug("%s", "actlistitem::actlistitem, rm\n"); +- +- _action = action; +- _num = num; ++QP_ActListItem::QP_ActListItem(QTParted::actType action, int num) ++ :_action(action),_num(num) ++{ ++ showDebug("%s", "actlistitem::actlistitem, rm\n"); + } + +-QP_ActListItem::QP_ActListItem(QTParted::actType action, +- int num, +- bool status) { +- showDebug("%s", "actlistitem::actlistitem, active\n"); +- +- _action = action; +- _num = num; +- _status = status; ++QP_ActListItem::QP_ActListItem(QTParted::actType action, int num, bool status) ++ :_action(action),_num(num),_status(status) ++{ ++ showDebug("%s", "actlistitem::actlistitem, active\n"); + } + + /*---for format! :)---*/ + QP_ActListItem::QP_ActListItem(QTParted::actType action, +- int num, +- QP_FileSystemSpec *fsspec, +- QString label, +- PedGeometry geom, +- PedPartitionType part_type) { +- showDebug("%s", "actlistitem::actlistitem, mkfs\n"); +- +- _action = action; +- _num = num; +- _fsspec = fsspec; +- _label = label; +- _geom = geom; +- _part_type = part_type; ++ int num, ++ QP_FileSystemSpec *fsspec, ++ QString label, ++ PedGeometry geom, ++ PedPartitionType part_type) ++ :_action(action),_num(num),_fsspec(fsspec) ++ ,_label(label),_geom(geom),_part_type(part_type) ++{ ++ showDebug("%s", "actlistitem::actlistitem, mkfs\n"); + } + + /*---type, logical/extended, start, end, typoFS, label---*/ + QP_ActListItem::QP_ActListItem(QTParted::actType action, +- QTParted::partType type, +- PedSector start, +- PedSector end, +- QP_FileSystemSpec *fsspec, +- QString label, +- PedGeometry geom, +- PedPartitionType part_type) { +- showDebug("%s", "actlistitem::actlistitem, mkpartfs\n"); +- +- _action = action; +- _type = type; +- _start = start; +- _end = end; +- _fsspec = fsspec; +- _label = label; +- _geom = geom; +- _part_type = part_type; ++ QTParted::partType type, ++ PedSector start, ++ PedSector end, ++ QP_FileSystemSpec *fsspec, ++ QString label, ++ PedGeometry geom, ++ PedPartitionType part_type) ++ :_action(action), _type(type), _start(start) ++ ,_end(end), _fsspec(fsspec), _label(label) ++ ,_geom(geom), _part_type(part_type) ++{ ++ showDebug("%s", "actlistitem::actlistitem, mkpartfs\n"); + } + +-QP_ActionList::QP_ActionList(QP_LibParted *libparted) { +- showDebug("%s", "actionlist::actionlist\n"); ++QP_ActionList::QP_ActionList(QP_LibParted *libparted):_libparted(libparted) ++{ ++ showDebug("%s", "actionlist::actionlist\n"); + +- /*---prevent from memory leak: when list are cleared destroy actlistitem object!---*/ +- actlist.setAutoDelete(true); ++ /*---prevent from memory leak: when list are cleared destroy actlistitem object!---*/ ++ actlist.setAutoDelete(true); + +- /*---prevent from memory leak: when list are cleared destroy partinfo object!---*/ +- orig_logilist.setAutoDelete(true); +- orig_partlist.setAutoDelete(true); ++ /*---prevent from memory leak: when list are cleared destroy partinfo object!---*/ ++ orig_logilist.setAutoDelete(true); ++ orig_partlist.setAutoDelete(true); + + +- PedDisk *disk; +- _libparted = libparted; ++ PedDisk *disk; + +- /*---save of the original device state---*/ +- disk = ped_disk_new(_libparted->dev); +- if (!disk) { +- showDebug("%s", "actionlist::actionlist, ped_disk_new ko\n"); +- +- QString label = QString(tr("Critical error during ped_disk_new!")); +- QMessageBox::information(NULL, PROG_NAME, label); ++ /*---save of the original device state---*/ ++ disk = ped_disk_new(_libparted->dev); ++ if (!disk) { ++ showDebug("%s", "actionlist::actionlist, ped_disk_new ko\n"); ++ ++ QString label = QString(tr("Critical error during ped_disk_new!")); ++ QMessageBox::information(NULL, PROG_NAME, label); + +- return ; +- } ++ return ; ++ } + +- listdisk.append(disk); ++ listdisk.append(disk); + +- /*---make a backup of the disk (we will use this)---*/ +- _disk = ped_disk_duplicate(disk); +- if (!_disk) { +- showDebug("%s", "actionlist::actionlist, ped_disk_duplicate ko\n"); +- ped_disk_destroy(disk); +- listdisk.removeLast(); +- disk = NULL; +- +- QString label = QString(tr("Critical error during ped_disk_duplicate!")); +- QMessageBox::information(NULL, PROG_NAME, label); ++ /*---make a backup of the disk (we will use this)---*/ ++ _disk = ped_disk_duplicate(disk); ++ if (!_disk) { ++ showDebug("%s", "actionlist::actionlist, ped_disk_duplicate ko\n"); ++ ped_disk_destroy(disk); ++ listdisk.removeLast(); ++ disk = NULL; ++ ++ QString label = QString(tr("Critical error during ped_disk_duplicate!")); ++ QMessageBox::information(NULL, PROG_NAME, label); + +- return ; +- } ++ return ; ++ } + +- /*---make the partlist of the disk---*/ +- scan_partitions(); ++ /*---make the partlist of the disk---*/ ++ scan_partitions(); + } + + QP_ActionList::~QP_ActionList() { +- showDebug("%s", "actionlist::~actionlist\n"); ++ showDebug("%s", "actionlist::~actionlist\n"); + +- actlist.clear(); +- orig_logilist.clear(); +- orig_partlist.clear(); +- ++ actlist.clear(); ++ orig_logilist.clear(); ++ orig_partlist.clear(); ++ + } + + void QP_ActionList::update_listpartitions() { +- showDebug("%s", "actionlist::update_listpartitions\n"); ++ showDebug("%s", "actionlist::update_listpartitions\n"); + +- /*---initialize active partition---*/ +- _partActive = NULL; ++ /*---initialize active partition---*/ ++ _partActive = NULL; + +- logilist.clear(); +- partlist.clear(); ++ logilist.clear(); ++ partlist.clear(); + +- _libparted->has_extended = false; ++ _libparted->has_extended = false; + + +- /*---look if exist a partition in orig_list that match with the partitions into disk device---*/ +- PedConstraint* constraint = NULL; ++ /*---look if exist a partition in orig_list that match with the partitions into disk device---*/ ++ PedConstraint* constraint = NULL; + PedPartition* part = NULL; + for (part = ped_disk_next_partition(disk(), NULL); part; +- part = ped_disk_next_partition(disk(), part)) { ++ part = ped_disk_next_partition(disk(), part)) { + +- if (part->type & PED_PARTITION_METADATA) +- continue; ++ if (part->type & PED_PARTITION_METADATA) ++ continue; + +- QP_PartInfo *found = NULL; +- +- /*---if not freespace...*/ +- if (!(part->type & PED_PARTITION_FREESPACE)) { +- /*---loop for all partition of the disk---*/ +- QP_PartInfo *p; +- for (p = (QP_PartInfo*)orig_partlist.first(); p; p = (QP_PartInfo*)orig_partlist.next()) { +- if (p->type != QTParted::extended) { +- if ((p->_geometry.start == part->geom.start) +- && (p->_geometry.end == part->geom.end) +- && (p->_geometry.length == part->geom.length)) { +- found = p; +- } +- } else { +- QP_PartInfo *logi; +- /*---loop for every logical partitions---*/ +- for (logi = (QP_PartInfo*)orig_logilist.first(); logi; logi = (QP_PartInfo*)orig_logilist.next()) { +- if ((logi->_geometry.start == part->geom.start) +- && (logi->_geometry.end == part->geom.end) +- && (logi->_geometry.length == part->geom.length)) { +- found = logi; +- } +- } +- } +- } +- } ++ QP_PartInfo *found = NULL; ++ ++ /*---if not freespace...*/ ++ if (!(part->type & PED_PARTITION_FREESPACE)) { ++ /*---loop for all partition of the disk---*/ ++ QP_PartInfo *p; ++ for (p = (QP_PartInfo*)orig_partlist.first(); p; p = (QP_PartInfo*)orig_partlist.next()) { ++ if (p->type != QTParted::extended) { ++ if ((p->_geometry.start == part->geom.start) ++ && (p->_geometry.end == part->geom.end) ++ && (p->_geometry.length == part->geom.length)) { ++ found = p; ++ } ++ } else { ++ QP_PartInfo *logi; ++ /*---loop for every logical partitions---*/ ++ for (logi = (QP_PartInfo*)orig_logilist.first(); logi; logi = (QP_PartInfo*)orig_logilist.next()) { ++ if ((logi->_geometry.start == part->geom.start) ++ && (logi->_geometry.end == part->geom.end) ++ && (logi->_geometry.length == part->geom.length)) { ++ found = logi; ++ } ++ } ++ } ++ } ++ } + +- showDebug("%s", "actionlist::update_listpartitions, looked if partition was in orig_logilist\n"); ++ showDebug("%s", "actionlist::update_listpartitions, looked if partition was in orig_logilist\n"); + +- QP_PartInfo *partinfo; +- if (found) { +- showDebug("%s", "actionlist::update_listpartitions, partition matched!\n"); +- partinfo = new QP_PartInfo(); +- partinfo->start = found->start; +- partinfo->end = found->end; +- partinfo->_geometry = found->_geometry; +- partinfo->setDevice(found->device()); +- partinfo->min_size = found->min_size; +- partinfo->_label = found->_label; +- partinfo->_free = found->_free; +- partinfo->_unknow = found->_unknow; +- partinfo->_libparted = found->_libparted; +- partinfo->_active = found->_active; +- partinfo->_canBeActive = found->_canBeActive; +- partinfo->_canBeHidden = found->_canBeHidden; +- partinfo->_virtual = found->_virtual; +- partinfo->fsspec = found->fsspec; +- } else { +- showDebug("%s", "actionlist::update_listpartitions, partition missmatched!\n"); +- partinfo = new QP_PartInfo(); +- partinfo->start = part->geom.start; +- partinfo->end = part->geom.end; +- partinfo->_geometry = part->geom; +- partinfo->setDevice(_libparted->_qpdevice); +- partinfo->min_size = -1; +- partinfo->_label = QString::null; +- partinfo->_free = _libparted->filesystem->free(); +- partinfo->_unknow = _libparted->filesystem->unknow(); +- partinfo->_libparted = _libparted; +- partinfo->_active = false; +- partinfo->_canBeActive = false; +- partinfo->_canBeHidden = false; +- partinfo->_virtual = false; ++ QP_PartInfo *partinfo; ++ if (found) { ++ showDebug("%s", "actionlist::update_listpartitions, partition matched!\n"); ++ partinfo = new QP_PartInfo(); ++ partinfo->start = found->start; ++ partinfo->end = found->end; ++ partinfo->_geometry = found->_geometry; ++ partinfo->setDevice(found->device()); ++ partinfo->min_size = found->min_size; ++ partinfo->_label = found->_label; ++ partinfo->_free = found->_free; ++ partinfo->_unknow = found->_unknow; ++ partinfo->_libparted = found->_libparted; ++ partinfo->_active = found->_active; ++ partinfo->_canBeActive = found->_canBeActive; ++ partinfo->_canBeHidden = found->_canBeHidden; ++ partinfo->_virtual = found->_virtual; ++ partinfo->fsspec = found->fsspec; ++ } else { ++ showDebug("%s", "actionlist::update_listpartitions, partition missmatched!\n"); ++ partinfo = new QP_PartInfo(); ++ partinfo->start = part->geom.start; ++ partinfo->end = part->geom.end; ++ partinfo->_geometry = part->geom; ++ partinfo->setDevice(_libparted->_qpdevice); ++ partinfo->min_size = -1; ++ partinfo->_label = QString::null; ++ partinfo->_free = _libparted->filesystem->free(); ++ partinfo->_unknow = _libparted->filesystem->unknow(); ++ partinfo->_libparted = _libparted; ++ partinfo->_active = false; ++ partinfo->_canBeActive = false; ++ partinfo->_canBeHidden = false; ++ partinfo->_virtual = false; + + +- const char *part_filesystem = part->fs_type ? part->fs_type->name : ""; +- if (part->type & PED_PARTITION_FREESPACE) { +- partinfo->fsspec = _libparted->filesystem->free(); +- } else { +- partinfo->fsspec = _libparted->filesystem->nameToFSSpec(part_filesystem); //fat16, fat32 etc etc +- } +- } ++ const char *part_filesystem = part->fs_type ? part->fs_type->name : ""; ++ if (part->type & PED_PARTITION_FREESPACE) { ++ partinfo->fsspec = _libparted->filesystem->free(); ++ } else { ++ partinfo->fsspec = _libparted->filesystem->nameToFSSpec(part_filesystem); //fat16, fat32 etc etc ++ } ++ } + +- //'cause the number can change use ALWAYS the right PedPartition number! +- partinfo->num = part->num; +- +- if (part->type & PED_PARTITION_LOGICAL) +- partinfo->type = QTParted::logical; +- else if (part->type & PED_PARTITION_EXTENDED) { +- partinfo->type = QTParted::extended; +- _libparted->has_extended = true; +- } +- else partinfo->type = QTParted::primary; ++ //'cause the number can change use ALWAYS the right PedPartition number! ++ partinfo->num = part->num; ++ ++ if (part->type & PED_PARTITION_LOGICAL) ++ partinfo->type = QTParted::logical; ++ else if (part->type & PED_PARTITION_EXTENDED) { ++ partinfo->type = QTParted::extended; ++ _libparted->has_extended = true; ++ } ++ else partinfo->type = QTParted::primary; + + +- showDebug("%s", "actionlist::update_listpartitions, get partitions flags\n"); ++ showDebug("%s", "actionlist::update_listpartitions, get partitions flags\n"); + +- //---get how much the partition can grow at left and at right +- //---get also if the partiton is "active" +- //---of course do all this stuff only if this is not freespace ;) +- //FIXME: t_start/t_end if the partition is free? is right? +- if (!partinfo->isFree()) { +- constraint = ped_constraint_any(_libparted->dev); +- PedGeometry *geometry = ped_disk_get_max_partition_geometry(disk(), part, constraint); +- if (geometry != NULL) { +- partinfo->t_start = geometry->start; +- partinfo->t_end = geometry->end; +- } else { +- partinfo->t_start = -1; +- partinfo->t_end = -1; +- } ++ //---get how much the partition can grow at left and at right ++ //---get also if the partiton is "active" ++ //---of course do all this stuff only if this is not freespace ;) ++ //FIXME: t_start/t_end if the partition is free? is right? ++ if (!partinfo->isFree()) { ++ constraint = ped_constraint_any(_libparted->dev); ++ PedGeometry *geometry = ped_disk_get_max_partition_geometry(disk(), part, constraint); ++ if (geometry != NULL) { ++ partinfo->t_start = geometry->start; ++ partinfo->t_end = geometry->end; ++ } else { ++ partinfo->t_start = -1; ++ partinfo->t_end = -1; ++ } + +- /*---get if the partition is active---*/ +- partition_get_flags(partinfo, part); +- } ++ /*---get if the partition is active---*/ ++ partition_get_flags(partinfo, part); ++ } + +- showDebug("%s", "actionlist::update_listpartitions, get partition infos\n"); ++ showDebug("%s", "actionlist::update_listpartitions, get partition infos\n"); + +- /*---compare if the partition has not committed... and if so update +- * some field (ie filesystem, and active flag, to reflect the change that +- * use made on listchart but that are not saved on the disk!---*/ +- get_partinfo(partinfo, part); ++ /*---compare if the partition has not committed... and if so update ++ * some field (ie filesystem, and active flag, to reflect the change that ++ * use made on listchart but that are not saved on the disk!---*/ ++ get_partinfo(partinfo, part); + +- /*---if this is a virtual partition do not show how space fill the device---*/ +- if (partinfo->isVirtual()) { +- partinfo->min_size = -1; +- } ++ /*---if this is a virtual partition do not show how space fill the device---*/ ++ if (partinfo->isVirtual()) { ++ partinfo->min_size = -1; ++ } + +- showDebug("%s", "actionlist::update_listpartitions, append the partition to partlist\n"); +- if (partinfo->type == QTParted::logical) +- logilist.append(partinfo); +- else partlist.append(partinfo); ++ showDebug("%s", "actionlist::update_listpartitions, append the partition to partlist\n"); ++ if (partinfo->type == QTParted::logical) ++ logilist.append(partinfo); ++ else partlist.append(partinfo); + +- } ++ } + + } + + void QP_ActionList::scan_partitions() { +- showDebug("%s", "actionlist::scan_partitions\n"); ++ showDebug("%s", "actionlist::scan_partitions\n"); + +- /*---initialize active partition---*/ +- _partActive = NULL; ++ /*---initialize active partition---*/ ++ _partActive = NULL; + +- orig_logilist.clear(); +- orig_partlist.clear(); ++ orig_logilist.clear(); ++ orig_partlist.clear(); + +- PedConstraint *constraint = NULL; ++ PedConstraint *constraint = NULL; + PedPartition *part = NULL; + for (part = ped_disk_next_partition(disk(), NULL); part; +- part = ped_disk_next_partition(disk(), part)) { ++ part = ped_disk_next_partition(disk(), part)) { + +- if (part->type & PED_PARTITION_METADATA) +- continue; ++ if (part->type & PED_PARTITION_METADATA) ++ continue; + +- showDebug("%s", "actionlist::scan_partitions, create a new partinfo\n"); +- QP_PartInfo *partinfo = new QP_PartInfo(); +- partinfo->start = part->geom.start; +- partinfo->end = part->geom.end; +- partinfo->_geometry = part->geom; +- partinfo->num = part->num; +- partinfo->setDevice(_libparted->_qpdevice); +- partinfo->min_size = -1; +- partinfo->_label = QString::null; +- partinfo->_free = _libparted->filesystem->free(); +- partinfo->_unknow = _libparted->filesystem->unknow(); +- partinfo->_libparted = _libparted; +- partinfo->_active = false; +- partinfo->_canBeActive = false; +- partinfo->_canBeHidden = false; +- partinfo->_virtual = false; ++ showDebug("%s", "actionlist::scan_partitions, create a new partinfo\n"); ++ QP_PartInfo *partinfo = new QP_PartInfo(); ++ partinfo->start = part->geom.start; ++ partinfo->end = part->geom.end; ++ partinfo->_geometry = part->geom; ++ partinfo->num = part->num; ++ partinfo->setDevice(_libparted->_qpdevice); ++ partinfo->min_size = -1; ++ partinfo->_label = QString::null; ++ partinfo->_free = _libparted->filesystem->free(); ++ partinfo->_unknow = _libparted->filesystem->unknow(); ++ partinfo->_libparted = _libparted; ++ partinfo->_active = false; ++ partinfo->_canBeActive = false; ++ partinfo->_canBeHidden = false; ++ partinfo->_virtual = false; + +- if (part->type & PED_PARTITION_LOGICAL) +- partinfo->type = QTParted::logical; +- else if (part->type & PED_PARTITION_EXTENDED) { +- partinfo->type = QTParted::extended; +- } +- else partinfo->type = QTParted::primary; +- +- const char *part_filesystem = part->fs_type ? part->fs_type->name : ""; ++ if (part->type & PED_PARTITION_LOGICAL) ++ partinfo->type = QTParted::logical; ++ else if (part->type & PED_PARTITION_EXTENDED) { ++ partinfo->type = QTParted::extended; ++ } ++ else partinfo->type = QTParted::primary; ++ ++ const char *part_filesystem = part->fs_type ? part->fs_type->name : ""; + +- if (part->type & PED_PARTITION_FREESPACE) { +- partinfo->fsspec = _libparted->filesystem->free(); +- partinfo->t_start = -1; +- partinfo->t_end = -1; +- } else { +- showDebug("%s", "actionlist::scan_partitions, get partinfo flags\n"); +- /*---get if the partition is active---*/ +- partition_get_flags(partinfo, part); ++ if (part->type & PED_PARTITION_FREESPACE) { ++ partinfo->fsspec = _libparted->filesystem->free(); ++ partinfo->t_start = -1; ++ partinfo->t_end = -1; ++ } else { ++ showDebug("%s", "actionlist::scan_partitions, get partinfo flags\n"); ++ /*---get if the partition is active---*/ ++ partition_get_flags(partinfo, part); + +- showDebug("%s", "actionlist::scan_partitions, get partinfo fsspec\n"); +- partinfo->fsspec = _libparted->filesystem->nameToFSSpec(part_filesystem); //fat16, fat32 etc etc ++ showDebug("%s", "actionlist::scan_partitions, get partinfo fsspec\n"); ++ partinfo->fsspec = _libparted->filesystem->nameToFSSpec(part_filesystem); //fat16, fat32 etc etc + +- //---get how much the partition can grow at left and at right, but only if the partition is not free space! +- constraint = ped_constraint_any(_libparted->dev); +- PedGeometry *geometry = +- ped_disk_get_max_partition_geometry(disk(), part, constraint); +- if (geometry != NULL) { +- partinfo->t_start = geometry->start; +- partinfo->t_end = geometry->end; +- } else { +- partinfo->t_start = -1; +- partinfo->t_end = -1; +- } +- } ++ //---get how much the partition can grow at left and at right, but only if the partition is not free space! ++ constraint = ped_constraint_any(_libparted->dev); ++ PedGeometry *geometry = ++ ped_disk_get_max_partition_geometry(disk(), part, constraint); ++ if (geometry != NULL) { ++ partinfo->t_start = geometry->start; ++ partinfo->t_end = geometry->end; ++ } else { ++ partinfo->t_start = -1; ++ partinfo->t_end = -1; ++ } ++ } + +- showDebug("%s", "actionlist::scan_partitions, append partinfo to orig_partlist\n"); ++ showDebug("%s", "actionlist::scan_partitions, append partinfo to orig_partlist\n"); + +- if (partinfo->type == QTParted::logical) +- orig_logilist.append(partinfo); +- else orig_partlist.append(partinfo); +- } ++ if (partinfo->type == QTParted::logical) ++ orig_logilist.append(partinfo); ++ else orig_partlist.append(partinfo); ++ } + + + +- /*---count how partition are in the disk---*/ +- int totPart = orig_partlist.count() + orig_logilist.count(); ++ /*---count how partition are in the disk---*/ ++ int totPart = orig_partlist.count() + orig_logilist.count(); + +- showDebug("%s", "actionlist::scan_partitions, loop into orig_partlist\n"); ++ showDebug("%s", "actionlist::scan_partitions, loop into orig_partlist\n"); + +- /*---loop for all partition of the disk---*/ +- QP_PartInfo *p; +- int i = 0; +- for (p = (QP_PartInfo*)orig_partlist.first(); p; p = (QP_PartInfo*)orig_partlist.next()) { +- if (p->type != QTParted::extended) { +- i++; +- if (!p->isFree()) { +- /*---emit a signal for update the progressbar---*/ +- _libparted->_message = QString(tr("Getting info about partition %1.")) +- .arg(p->partname()); +- _libparted->emitSigTimer(i*100/totPart, _libparted->message(), QString::null); ++ /*---loop for all partition of the disk---*/ ++ QP_PartInfo *p; ++ int i = 0; ++ for (p = (QP_PartInfo*)orig_partlist.first(); p; p = (QP_PartInfo*)orig_partlist.next()) { ++ if (p->type != QTParted::extended) { ++ i++; ++ if (!p->isFree()) { ++ /*---emit a signal for update the progressbar---*/ ++ _libparted->_message = QString(tr("Getting info about partition %1.")) ++ .arg(p->partname()); ++ _libparted->emitSigTimer(i*100/totPart, _libparted->message(), QString::null); + +- /*---get info about this primary partition---*/ +- part = ped_disk_get_partition(disk(), p->num); +- if (part) get_partfilesystem_info(part, p); +- else showDebug("%s", "actionlist::scan_partitions, get_partfilesystem_info ko\n"); ++ /*---get info about this primary partition---*/ ++ part = ped_disk_get_partition(disk(), p->num); ++ if (part) get_partfilesystem_info(part, p); ++ else showDebug("%s", "actionlist::scan_partitions, get_partfilesystem_info ko\n"); + +- /*---get the label of this primary partition---*/ +- if (part) get_partfilesystem_label(part, p); +- else showDebug("%s", "actionlist::scan_partitions, get_partfilesystem_label ko\n"); +- } +- } else { +- QP_PartInfo *logi; +- /*---loop for every logical partitions---*/ +- for (logi = (QP_PartInfo*)orig_logilist.first(); logi; logi = (QP_PartInfo*)orig_logilist.next()) { +- i++; +- if (!logi->isFree()) { +- /*---emit a signal for update the progressbar---*/ +- _libparted->_message = QString(tr("Getting info about partition %1.")) +- .arg(logi->partname()); +- _libparted->emitSigTimer(i*100/totPart, _libparted->message(), QString::null); +- +- /*---get info about this logical partition---*/ +- part = ped_disk_get_partition(disk(), logi->num); +- if (part) get_partfilesystem_info(part, logi); +- else showDebug("%s", "actionlist::scan_partitions, get_partfilesystem_info ko\n"); ++ /*---get the label of this primary partition---*/ ++ if (part) get_partfilesystem_label(part, p); ++ else showDebug("%s", "actionlist::scan_partitions, get_partfilesystem_label ko\n"); ++ } ++ } else { ++ QP_PartInfo *logi; ++ /*---loop for every logical partitions---*/ ++ for (logi = (QP_PartInfo*)orig_logilist.first(); logi; logi = (QP_PartInfo*)orig_logilist.next()) { ++ i++; ++ if (!logi->isFree()) { ++ /*---emit a signal for update the progressbar---*/ ++ _libparted->_message = QString(tr("Getting info about partition %1.")) ++ .arg(logi->partname()); ++ _libparted->emitSigTimer(i*100/totPart, _libparted->message(), QString::null); ++ ++ /*---get info about this logical partition---*/ ++ part = ped_disk_get_partition(disk(), logi->num); ++ if (part) get_partfilesystem_info(part, logi); ++ else showDebug("%s", "actionlist::scan_partitions, get_partfilesystem_info ko\n"); + +- /*---get the label of this logical partition---*/ +- if (part) get_partfilesystem_label(part, logi); +- else showDebug("%s", "actionlist::scan_partitions, get_partfilesystem_label ko\n"); +- } +- } +- } +- } +- +- _libparted->emitSigTimer(100, _libparted->message(), QString::null); ++ /*---get the label of this logical partition---*/ ++ if (part) get_partfilesystem_label(part, logi); ++ else showDebug("%s", "actionlist::scan_partitions, get_partfilesystem_label ko\n"); ++ } ++ } ++ } ++ } ++ ++ _libparted->emitSigTimer(100, _libparted->message(), QString::null); + } + + bool QP_ActionList::get_partfilesystem_info(PedPartition *part, QP_PartInfo *partinfo) { +- showDebug("%s", "actionlist::get_partfilesystem_info\n"); ++ showDebug("%s", "actionlist::get_partfilesystem_info\n"); + +- /*---if the partition is virtual (ie change not committed) we cannot determinate +- * how much the filesystem is fill---*/ +- if (partinfo->_virtual) { +- partinfo->min_size = -1; +- return true; +- } ++ /*---if the partition is virtual (ie change not committed) we cannot determinate ++ * how much the filesystem is fill---*/ ++ if (partinfo->_virtual) { ++ partinfo->min_size = -1; ++ return true; ++ } + +- /*---is the filesystem supported by parted?---*/ +- PedFileSystem *fs = ped_file_system_open(&part->geom); +- if (!fs) { +- /*---exist a wrapper for min_size?---*/ +- if (partinfo->fswrap() && partinfo->fsspec->fswrap()->wrap_min_size) { +- /*---get the min_size from the wrapper---*/ +- partinfo->min_size = partinfo->fsspec->fswrap()->min_size(partinfo->partname()); +- if (partinfo->min_size > (partinfo->end-partinfo->start)) partinfo->min_size=partinfo->end-partinfo->start; ++ /*---is the filesystem supported by parted?---*/ ++ PedFileSystem *fs = ped_file_system_open(&part->geom); ++ if (!fs) { ++ /*---exist a wrapper for min_size?---*/ ++ if (partinfo->fswrap() && partinfo->fsspec->fswrap()->wrap_min_size) { ++ /*---get the min_size from the wrapper---*/ ++ partinfo->min_size = partinfo->fsspec->fswrap()->min_size(partinfo->partname()); ++ if (partinfo->min_size > (partinfo->end-partinfo->start)) partinfo->min_size=partinfo->end-partinfo->start; + } +- else +- /*---get the min_size from space_stats (that is a "df" wrapper)---*/ +- partinfo->min_size = space_stats(partinfo); ++ else ++ /*---get the min_size from space_stats (that is a "df" wrapper)---*/ ++ partinfo->min_size = space_stats(partinfo); + +- return true; +- } ++ return true; ++ } + +- /*---get the minimum filesystem size---*/ +- PedConstraint *resize_constraint = ped_file_system_get_resize_constraint(fs); +- if (resize_constraint) { +- partinfo->min_size = resize_constraint->min_size; +- ped_constraint_destroy (resize_constraint); +- } ++ /*---get the minimum filesystem size---*/ ++ PedConstraint *resize_constraint = ped_file_system_get_resize_constraint(fs); ++ if (resize_constraint) { ++ partinfo->min_size = resize_constraint->min_size; ++ ped_constraint_destroy (resize_constraint); ++ } + +- ped_file_system_close(fs); ++ ped_file_system_close(fs); + +- return true; ++ return true; + } + + bool QP_ActionList::get_partfilesystem_label(PedPartition *part, QP_PartInfo *partinfo) { +- if (partinfo->_virtual) +- return true; ++ if (partinfo->_virtual) ++ return true; + +- partinfo->_label = QP_FSWrap::get_label(part, partinfo->fsspec->name()); ++ partinfo->_label = QP_FSWrap::get_label(part, partinfo->fsspec->name()); + +- return true; ++ return true; + } + + void QP_ActionList::ins_resize(int num, +- PedSector start, +- PedSector end, +- PedGeometry geom, +- PedPartitionType part_type) { +- showDebug("%s", "actionlist::ins_resize\n"); +- +- QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::resize, num, start, end, +- geom, part_type); +- actlist.append(actlistitem); ++ PedSector start, ++ PedSector end, ++ PedGeometry geom, ++ PedPartitionType part_type) { ++ showDebug("%s", "actionlist::ins_resize\n"); ++ ++ QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::resize, num, start, end, ++ geom, part_type); ++ actlist.append(actlistitem); + +- ins_newdisk(); ++ ins_newdisk(); + } + + void QP_ActionList::ins_move(int num, +- PedSector start, +- PedSector end, +- PedGeometry geom, +- PedPartitionType part_type) { +- showDebug("%s", "actionlist::ins_move\n"); +- +- QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::move, num, start, end, +- geom, part_type); +- actlist.append(actlistitem); ++ PedSector start, ++ PedSector end, ++ PedGeometry geom, ++ PedPartitionType part_type) { ++ showDebug("%s", "actionlist::ins_move\n"); ++ ++ QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::move, num, start, end, ++ geom, part_type); ++ actlist.append(actlistitem); + +- ins_newdisk(); ++ ins_newdisk(); + } + + void QP_ActionList::ins_rm(int num) { +- showDebug("%s", "actionlist::ins_rm\n"); ++ showDebug("%s", "actionlist::ins_rm\n"); + +- QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::rm, num); +- actlist.append(actlistitem); ++ QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::rm, num); ++ actlist.append(actlistitem); + +- ins_newdisk(); ++ ins_newdisk(); + } + + void QP_ActionList::ins_mkfs(QP_FileSystemSpec *fsspec, int num, QString label, PedGeometry geom, PedPartitionType part_type) { +- showDebug("%s", "actionlist::ins_mkfs\n"); ++ showDebug("%s", "actionlist::ins_mkfs\n"); + +- QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::format, num, fsspec, label, geom, part_type); +- actlist.append(actlistitem); ++ QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::format, num, fsspec, label, geom, part_type); ++ actlist.append(actlistitem); + +- ins_newdisk(); ++ ins_newdisk(); + } + + void QP_ActionList::ins_mkpart(QTParted::partType type, +- PedSector start, +- PedSector end, +- QP_FileSystemSpec *fsspec, +- QString label, +- PedGeometry geom, +- PedPartitionType part_type) { +- showDebug("%s", "actionlist::ins_mkpart\n"); ++ PedSector start, ++ PedSector end, ++ QP_FileSystemSpec *fsspec, ++ QString label, ++ PedGeometry geom, ++ PedPartitionType part_type) { ++ showDebug("%s", "actionlist::ins_mkpart\n"); + +- QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::create, type, +- start, end, fsspec, label, geom, part_type); +- actlist.append(actlistitem); ++ QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::create, type, ++ start, end, fsspec, label, geom, part_type); ++ actlist.append(actlistitem); + +- ins_newdisk(); ++ ins_newdisk(); + } + + void QP_ActionList::ins_active(int num, bool active) { +- showDebug("%s", "actionlist::ins_active\n"); +- +- QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::active, num, active); +- actlist.append(actlistitem); ++ showDebug("%s", "actionlist::ins_active\n"); ++ ++ QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::active, num, active); ++ actlist.append(actlistitem); + +- ins_newdisk(); ++ ins_newdisk(); + } + + void QP_ActionList::ins_hidden(int num, bool hidden) { +- showDebug("%s", "actionlist::ins_hidden\n"); +- +- QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::hidden, num, hidden); +- actlist.append(actlistitem); ++ showDebug("%s", "actionlist::ins_hidden\n"); ++ ++ QP_ActListItem *actlistitem = new QP_ActListItem(QTParted::hidden, num, hidden); ++ actlist.append(actlistitem); + +- ins_newdisk(); ++ ins_newdisk(); + } + + void QP_ActionList::get_partinfo(QP_PartInfo *partinfo, PedPartition *part) { +- showDebug("%s", "actionlist::get_partinfo\n"); ++ showDebug("%s", "actionlist::get_partinfo\n"); + +- /*---loop for every action saved---*/ +- QP_ActListItem *pl; +- for (pl = (QP_ActListItem *)actlist.first(); pl; pl = (QP_ActListItem *)actlist.next()) { +- /*---if you saved a mkpart (Create) and the geometry match... man: we have a virtual!---*/ +- if ((pl->_action == QTParted::create) +- || (pl->_action == QTParted::resize) +- || (pl->_action == QTParted::move) +- || (pl->_action == QTParted::format)) { +- if ((part->geom.start == pl->_geom.start) +- && (part->geom.end == pl->_geom.end) +- && (part->geom.length == pl->_geom.length) +- && (part->type == pl->_part_type)) { +- partinfo->_virtual = true; ++ /*---loop for every action saved---*/ ++ QP_ActListItem *pl; ++ for (pl = (QP_ActListItem *)actlist.first(); pl; pl = (QP_ActListItem *)actlist.next()) { ++ /*---if you saved a mkpart (Create) and the geometry match... man: we have a virtual!---*/ ++ if ((pl->_action == QTParted::create) ++ || (pl->_action == QTParted::resize) ++ || (pl->_action == QTParted::move) ++ || (pl->_action == QTParted::format)) { ++ if ((part->geom.start == pl->_geom.start) ++ && (part->geom.end == pl->_geom.end) ++ && (part->geom.length == pl->_geom.length) ++ && (part->type == pl->_part_type)) { ++ partinfo->_virtual = true; + +- if (pl->_action == QTParted::create) partinfo->fsspec = pl->_fsspec; +- if (pl->_action == QTParted::format) partinfo->fsspec = pl->_fsspec; +- } +- } +- } ++ if (pl->_action == QTParted::create) partinfo->fsspec = pl->_fsspec; ++ if (pl->_action == QTParted::format) partinfo->fsspec = pl->_fsspec; ++ } ++ } ++ } + } + + bool QP_ActionList::canUndo() { +- return (listdisk.first() != listdisk.last()); ++ return (listdisk.first() != listdisk.last()); + } + + void QP_ActionList::undo() { +- showDebug("%s", "actionlist::undo\n"); ++ showDebug("%s", "actionlist::undo\n"); + +- /*---destroy the state of the disk in this moment---*/ +- ped_disk_destroy(_disk); ++ /*---destroy the state of the disk in this moment---*/ ++ ped_disk_destroy(_disk); + +- /*---undo last operation---*/ +- PedDisk *disk = (PedDisk *)listdisk.last(); +- ped_disk_destroy(disk); +- listdisk.removeLast(); ++ /*---undo last operation---*/ ++ PedDisk *disk = (PedDisk *)listdisk.last(); ++ ped_disk_destroy(disk); ++ listdisk.removeLast(); + +- /*---restore last state---*/ +- _disk = ped_disk_duplicate((PedDisk *)listdisk.last()); //FIXME: if !_disk :( +- if (!_disk) showDebug("%s", "actionlist::undo, ped_disk_duplicate ko\n"); ++ /*---restore last state---*/ ++ _disk = ped_disk_duplicate((PedDisk *)listdisk.last()); //FIXME: if !_disk :( ++ if (!_disk) showDebug("%s", "actionlist::undo, ped_disk_duplicate ko\n"); + +- /*---remove last operation---*/ +- actlist.removeLast(); ++ /*---remove last operation---*/ ++ actlist.removeLast(); + +- /*---the state of the disk... is of course changed---*/ +- emit sigDiskChanged(); ++ /*---the state of the disk... is of course changed---*/ ++ emit sigDiskChanged(); + } + + void QP_ActionList::commit() { +- showDebug("%s", "actionlist::commit\n"); ++ showDebug("%s", "actionlist::commit\n"); + +- //messageState, used to keep "error message" returned by libparted +- QString messageState = QString::null; +- +- /*---undo all disk state---*/ +- while (listdisk.first() != listdisk.last()) { +- PedDisk *disk = (PedDisk *)listdisk.last(); +- ped_disk_destroy(disk); +- listdisk.removeLast(); +- } +- _disk = ped_disk_duplicate((PedDisk *)listdisk.first()); +- if (!_disk) showDebug("%s", "actionlist::commit, ped_disk_duplicate ko\n"); +- +- /*---commit the operations in "batch" mode---*/ +- _libparted->setWrite(true); ++ //messageState, used to keep "error message" returned by libparted ++ QString messageState = QString::null; ++ ++ /*---undo all disk state---*/ ++ while (listdisk.first() != listdisk.last()) { ++ PedDisk *disk = (PedDisk *)listdisk.last(); ++ ped_disk_destroy(disk); ++ listdisk.removeLast(); ++ } ++ _disk = ped_disk_duplicate((PedDisk *)listdisk.first()); ++ if (!_disk) showDebug("%s", "actionlist::commit, ped_disk_duplicate ko\n"); ++ ++ /*---commit the operations in "batch" mode---*/ ++ _libparted->setWrite(true); + +- bool rc = true; +- +- //counter of how much operations are done! +- int i = 0; +- int iTotAct = actlist.count() + 1; +- +- QP_ActListItem *pl; +- for (pl = (QP_ActListItem *)actlist.first(); pl; pl = (QP_ActListItem *)actlist.next()) { +- showDebug("%s", "actionlist::commit, loop for commit\n"); +- +- //---mkpart commit--- +- if (pl->_action == QTParted::create) { +- showDebug("%s", "actionlist::commit, want to commit a create\n"); +- emit sigOperations(tr("Creating partition."), messageState, i++, iTotAct); +- if (!_libparted->mkpartfs(pl->_type, pl->_fsspec, pl->_start, pl->_end, pl->_label)) { +- messageState = _libparted->message(); +- rc = false; +- } +- } +- //---rm commit--- +- else if (pl->_action == QTParted::rm) { +- showDebug("%s", "actionlist::commit, want to commit a rm\n"); +- emit sigOperations(tr("Preparation for removing a partition."), messageState, i++, iTotAct); +- scan_partitions(); +- _libparted->scan_orig_partitions(); ++ bool rc = true; ++ ++ //counter of how much operations are done! ++ int i = 0; ++ int iTotAct = actlist.count() + 1; ++ ++ QP_ActListItem *pl; ++ for (pl = (QP_ActListItem *)actlist.first(); pl; pl = (QP_ActListItem *)actlist.next()) { ++ showDebug("%s", "actionlist::commit, loop for commit\n"); ++ ++ //---mkpart commit--- ++ if (pl->_action == QTParted::create) { ++ showDebug("%s", "actionlist::commit, want to commit a create\n"); ++ emit sigOperations(tr("Creating partition."), messageState, i++, iTotAct); ++ if (!_libparted->mkpartfs(pl->_type, pl->_fsspec, pl->_start, pl->_end, pl->_label)) { ++ messageState = _libparted->message(); ++ rc = false; ++ } ++ } ++ //---rm commit--- ++ else if (pl->_action == QTParted::rm) { ++ showDebug("%s", "actionlist::commit, want to commit a rm\n"); ++ emit sigOperations(tr("Preparation for removing a partition."), messageState, i++, iTotAct); ++ scan_partitions(); ++ _libparted->scan_orig_partitions(); + +- emit sigOperations(tr("Removing a partition."), messageState, i, iTotAct); +- if (!_libparted->rm(pl->_num)) { +- messageState = _libparted->message(); +- rc = false; +- } +- } +- //---resize commit--- +- else if (pl->_action == QTParted::resize) { +- showDebug("%s", "actionlist::commit, want to commit a resize\n"); +- emit sigOperations(tr("Preparation for resizing a partition."), messageState, i++, iTotAct); +- scan_partitions(); +- _libparted->scan_orig_partitions(); ++ emit sigOperations(tr("Removing a partition."), messageState, i, iTotAct); ++ if (!_libparted->rm(pl->_num)) { ++ messageState = _libparted->message(); ++ rc = false; ++ } ++ } ++ //---resize commit--- ++ else if (pl->_action == QTParted::resize) { ++ showDebug("%s", "actionlist::commit, want to commit a resize\n"); ++ emit sigOperations(tr("Preparation for resizing a partition."), messageState, i++, iTotAct); ++ scan_partitions(); ++ _libparted->scan_orig_partitions(); + +- emit sigOperations(tr("Resizing a partition."), messageState, i, iTotAct); +- if (!_libparted->resize(pl->_num, pl->_start, pl->_end)) { +- messageState = _libparted->message(); +- rc = false; +- } +- } +- //---move commit--- +- else if (pl->_action == QTParted::move) { +- showDebug("%s", "actionlist::commit, want to commit a move\n"); +- emit sigOperations(tr("Preparation for moving a partition."), messageState, i++, iTotAct); +- scan_partitions(); +- _libparted->scan_orig_partitions(); ++ emit sigOperations(tr("Resizing a partition."), messageState, i, iTotAct); ++ if (!_libparted->resize(pl->_num, pl->_start, pl->_end)) { ++ messageState = _libparted->message(); ++ rc = false; ++ } ++ } ++ //---move commit--- ++ else if (pl->_action == QTParted::move) { ++ showDebug("%s", "actionlist::commit, want to commit a move\n"); ++ emit sigOperations(tr("Preparation for moving a partition."), messageState, i++, iTotAct); ++ scan_partitions(); ++ _libparted->scan_orig_partitions(); + +- emit sigOperations(tr("Moving a partition."), messageState, i, iTotAct); +- if (!_libparted->move(pl->_num, pl->_start, pl->_end)) { +- messageState = _libparted->message(); +- rc = false; +- } +- } +- //---active commit--- +- else if (pl->_action == QTParted::active) { +- showDebug("%s", "actionlist::commit, want to commit an active\n"); +- emit sigOperations(tr("Preparation for activating a partition."), messageState, i++, iTotAct); +- scan_partitions(); +- _libparted->scan_orig_partitions(); ++ emit sigOperations(tr("Moving a partition."), messageState, i, iTotAct); ++ if (!_libparted->move(pl->_num, pl->_start, pl->_end)) { ++ messageState = _libparted->message(); ++ rc = false; ++ } ++ } ++ //---active commit--- ++ else if (pl->_action == QTParted::active) { ++ showDebug("%s", "actionlist::commit, want to commit an active\n"); ++ emit sigOperations(tr("Preparation for activating a partition."), messageState, i++, iTotAct); ++ scan_partitions(); ++ _libparted->scan_orig_partitions(); + +- emit sigOperations(tr("Activating a partition."), messageState, i, iTotAct); +- if (!_libparted->partition_set_flag_active(pl->_num, pl->_status)) { +- messageState = _libparted->message(); +- rc = false; +- } +- } +- //---active commit--- +- else if (pl->_action == QTParted::hidden) { +- showDebug("%s", "actionlist::commit, want to commit an hidden\n"); +- emit sigOperations(tr("Preparation for hiding a partition."), messageState, i++, iTotAct); +- scan_partitions(); +- _libparted->scan_orig_partitions(); ++ emit sigOperations(tr("Activating a partition."), messageState, i, iTotAct); ++ if (!_libparted->partition_set_flag_active(pl->_num, pl->_status)) { ++ messageState = _libparted->message(); ++ rc = false; ++ } ++ } ++ //---active commit--- ++ else if (pl->_action == QTParted::hidden) { ++ showDebug("%s", "actionlist::commit, want to commit an hidden\n"); ++ emit sigOperations(tr("Preparation for hiding a partition."), messageState, i++, iTotAct); ++ scan_partitions(); ++ _libparted->scan_orig_partitions(); + +- emit sigOperations(tr("Hiding a partition."), messageState, i, iTotAct); +- if (!_libparted->partition_set_flag_hidden(pl->_num, pl->_status)) { +- messageState = _libparted->message(); +- rc = false; +- } +- } +- //---active commit--- +- else if (pl->_action == QTParted::format) { +- showDebug("%s", "actionlist::commit, want to commit a format\n"); +- emit sigOperations(tr("Preparation for formatting a partition."), messageState, i++, iTotAct); +- scan_partitions(); +- _libparted->scan_orig_partitions(); ++ emit sigOperations(tr("Hiding a partition."), messageState, i, iTotAct); ++ if (!_libparted->partition_set_flag_hidden(pl->_num, pl->_status)) { ++ messageState = _libparted->message(); ++ rc = false; ++ } ++ } ++ //---active commit--- ++ else if (pl->_action == QTParted::format) { ++ showDebug("%s", "actionlist::commit, want to commit a format\n"); ++ emit sigOperations(tr("Preparation for formatting a partition."), messageState, i++, iTotAct); ++ scan_partitions(); ++ _libparted->scan_orig_partitions(); + +- emit sigOperations(tr("Formatting a partition."), messageState, i, iTotAct); +- if (!_libparted->mkfs(pl->_num, pl->_fsspec, pl->_label)) { +- messageState = _libparted->message(); +- rc = false; +- } +- } ++ emit sigOperations(tr("Formatting a partition."), messageState, i, iTotAct); ++ if (!_libparted->mkfs(pl->_num, pl->_fsspec, pl->_label)) { ++ messageState = _libparted->message(); ++ rc = false; ++ } ++ } + +- /*---just update GUI---*/ +- qApp->processEvents(); +- +- if (rc == false) { +- break; +- } +- } ++ /*---just update GUI---*/ ++ qApp->processEvents(); ++ ++ if (rc == false) { ++ break; ++ } ++ } + +- actlist.clear(); ++ actlist.clear(); + +- /*---return in test mode---*/ +- _libparted->setWrite(false); ++ /*---return in test mode---*/ ++ _libparted->setWrite(false); + +- /*---remove the disk used---*/ +- ped_disk_destroy(_disk); ++ /*---remove the disk used---*/ ++ ped_disk_destroy(_disk); + +- /*---remove also the original disk---*/ +- ped_disk_destroy((PedDisk *)listdisk.first()); +- listdisk.clear(); ++ /*---remove also the original disk---*/ ++ ped_disk_destroy((PedDisk *)listdisk.first()); ++ listdisk.clear(); + +- /*---prepare the list and the _disk---*/ +- PedDisk *disk = ped_disk_new(_libparted->dev); //FIXME !disk +- if (!disk) showDebug("%s", "actionlist::commit, ped_disk_new ko\n"); +- +- listdisk.append(disk); +- _disk = ped_disk_duplicate(disk); //FIXME !_disk +- if (!_disk) showDebug("%s", "actionlist::commit, ped_disk_duplicate ko\n"); ++ /*---prepare the list and the _disk---*/ ++ PedDisk *disk = ped_disk_new(_libparted->dev); //FIXME !disk ++ if (!disk) showDebug("%s", "actionlist::commit, ped_disk_new ko\n"); ++ ++ listdisk.append(disk); ++ _disk = ped_disk_duplicate(disk); //FIXME !_disk ++ if (!_disk) showDebug("%s", "actionlist::commit, ped_disk_duplicate ko\n"); + +- emit sigOperations(tr("Rescan of the disk."), messageState, i, iTotAct); +- +- showDebug("%s", "actionlist::commit, call scan_partitions\n"); ++ emit sigOperations(tr("Rescan of the disk."), messageState, i, iTotAct); ++ ++ showDebug("%s", "actionlist::commit, call scan_partitions\n"); + +- /*---make a new scan of the partitions---*/ +- scan_partitions(); ++ /*---make a new scan of the partitions---*/ ++ scan_partitions(); + +- emit sigOperations(tr("All operations completed."), messageState, iTotAct, iTotAct); ++ emit sigOperations(tr("All operations completed."), messageState, iTotAct, iTotAct); + +- /*---the state of the disk... is of course changed---*/ +- emit sigDiskChanged(); ++ /*---the state of the disk... is of course changed---*/ ++ emit sigDiskChanged(); + } + + PedDisk * QP_ActionList::disk() { +- return _disk; ++ return _disk; + } + + QP_PartInfo * QP_ActionList::partActive() { +- return _partActive; ++ return _partActive; + } + + /*---this will get if the partition has active flag (ie is bootable)---*/ + void QP_ActionList::partition_get_flags(QP_PartInfo *partinfo, PedPartition *part) { +- if (ped_partition_is_flag_available(part, PED_PARTITION_BOOT)) { +- partinfo->_canBeActive = true; +- bool active = bool(ped_partition_get_flag(part, PED_PARTITION_BOOT)); +- partinfo->_active = active; +- if (active) _partActive = partinfo; +- } ++ if (ped_partition_is_flag_available(part, PED_PARTITION_BOOT)) { ++ partinfo->_canBeActive = true; ++ bool active = bool(ped_partition_get_flag(part, PED_PARTITION_BOOT)); ++ partinfo->_active = active; ++ if (active) _partActive = partinfo; ++ } + +- if (ped_partition_is_flag_available(part, PED_PARTITION_HIDDEN)) { +- partinfo->_canBeHidden = true; +- bool hidden = bool(ped_partition_get_flag(part, PED_PARTITION_HIDDEN)); +- partinfo->_hidden = hidden; +- } ++ if (ped_partition_is_flag_available(part, PED_PARTITION_HIDDEN)) { ++ partinfo->_canBeHidden = true; ++ bool hidden = bool(ped_partition_get_flag(part, PED_PARTITION_HIDDEN)); ++ partinfo->_hidden = hidden; ++ } + } + + void QP_ActionList::ins_newdisk() { +- showDebug("%s", "actionlist::ins_newdisk\n"); ++ showDebug("%s", "actionlist::ins_newdisk\n"); + +- listdisk.append(_disk); +- _disk = ped_disk_duplicate(_disk); //FIXME !_disk +- if (!_disk) showDebug("%s", "actionlist::ins_newdisk, ped_disk_duplicate ko\n"); ++ listdisk.append(_disk); ++ _disk = ped_disk_duplicate(_disk); //FIXME !_disk ++ if (!_disk) showDebug("%s", "actionlist::ins_newdisk, ped_disk_duplicate ko\n"); + +- emit sigDiskChanged(); ++ emit sigDiskChanged(); + } +diff -urNad qtparted-0.4.5~/src/qp_actlist.h qtparted-0.4.5/src/qp_actlist.h +--- qtparted-0.4.5~/src/qp_actlist.h 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_actlist.h 2006-03-01 20:53:21.492252648 +0000 +@@ -1,22 +1,22 @@ + /* +- qtparted - a frontend to libparted for manipulating disk partitions +- Copyright (C) 2002-2003 Vanni Brutto ++ qtparted - a frontend to libparted for manipulating disk partitions ++ Copyright (C) 2002-2003 Vanni Brutto + +- Vanni Brutto ++ Vanni Brutto + +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2 of the License, or +- (at your option) any later version. ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. + +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. + +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software +- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + /* About QP_ActList class +@@ -36,89 +36,87 @@ + + /* move, -> num, start, end + * resize, -> num, start, end +- * rm, -> num ++ * rm, -> num + * create -> start, end, tipo_estesa_logica, fsspec, label + * */ + class QP_ActListItem { + public: +- /*---type (move+resize), num, start, end, geometry, parttype---*/ +- QP_ActListItem(QTParted::actType, int, PedSector, PedSector, PedGeometry, PedPartitionType); ++ /*---type (move+resize), num, start, end, geometry, parttype---*/ ++ QP_ActListItem(QTParted::actType, int, PedSector, PedSector, PedGeometry, PedPartitionType); + +- /*---type, num (rm)---*/ +- QP_ActListItem(QTParted::actType, int); ++ /*---type, num (rm)---*/ ++ QP_ActListItem(QTParted::actType, int); + +- /*---type (format), num, fsspec, label, geometry, parttype---*/ +- QP_ActListItem(QTParted::actType, int, QP_FileSystemSpec *, QString, PedGeometry, PedPartitionType); ++ /*---type (format), num, fsspec, label, geometry, parttype---*/ ++ QP_ActListItem(QTParted::actType, int, QP_FileSystemSpec *, QString, PedGeometry, PedPartitionType); + +- /*---type, num, active---*/ +- QP_ActListItem(QTParted::actType, int, bool); ++ /*---type, num, active---*/ ++ QP_ActListItem(QTParted::actType, int, bool); + +- /*---type, logical/extended, start, end, typoFS, label, geometry, parttype---*/ +- QP_ActListItem(QTParted::actType, +- QTParted::partType, +- PedSector, PedSector, +- QP_FileSystemSpec *, +- QString, +- PedGeometry, +- PedPartitionType); ++ /*---type, logical/extended, start, end, typoFS, label, geometry, parttype---*/ ++ QP_ActListItem(QTParted::actType, ++ QTParted::partType, ++ PedSector, PedSector, ++ QP_FileSystemSpec *, ++ QString, ++ PedGeometry, ++ PedPartitionType); + + //private: +- QTParted::actType _action; +- PedSector _start; +- PedSector _end; +- int _num; +- QTParted::partType _type; +- QP_FileSystemSpec *_fsspec; +- QString _label; +- PedGeometry _geom; +- PedPartitionType _part_type; +- bool _status; //used for boot and hidden flags ++ QTParted::actType _action; ++ PedSector _start; ++ PedSector _end; ++ int _num; ++ QTParted::partType _type; ++ QP_FileSystemSpec *_fsspec; ++ QString _label; ++ PedGeometry _geom; ++ PedPartitionType _part_type; ++ bool _status; //used for boot and hidden flags + }; + + + class QP_ActionList : public QObject { +-friend class QP_LibParted; +-friend class QP_PartInfo; +-Q_OBJECT ++ friend class QP_LibParted; ++ friend class QP_PartInfo; ++ Q_OBJECT + public: +- QP_ActionList(QP_LibParted *); +- ~QP_ActionList(); +- void update_listpartitions(); +- void scan_partitions(); //scan for every partition +- bool get_partfilesystem_info(PedPartition *, QP_PartInfo *); +- bool get_partfilesystem_label(PedPartition *part, QP_PartInfo *partinfo); +- void ins_resize(int, PedSector, PedSector, PedGeometry, PedPartitionType); +- void ins_move(int, PedSector, PedSector, PedGeometry, PedPartitionType); +- void ins_rm(int); +- void ins_mkfs(QP_FileSystemSpec *, int, QString, PedGeometry, PedPartitionType); +- void ins_mkpart(QTParted::partType, PedSector, PedSector, QP_FileSystemSpec *, QString, PedGeometry, PedPartitionType); +- void ins_active(int, bool); +- void ins_hidden(int, bool); +- void get_partinfo(QP_PartInfo *, PedPartition *); +- bool canUndo(); //Does the user can undo/commit? +- void undo(); //undo last operation +- void commit(); //commit all operations +- PedDisk *disk(); //return the actual state of the disk +- QP_PartInfo *partActive(); //return the partinfo that is bootable +- QPtrList partlist; +- QPtrList logilist; ++ QP_ActionList(QP_LibParted *); ++ ~QP_ActionList(); ++ void update_listpartitions(); ++ void scan_partitions(); //scan for every partition ++ bool get_partfilesystem_info(PedPartition *, QP_PartInfo *); ++ bool get_partfilesystem_label(PedPartition *part, QP_PartInfo *partinfo); ++ void ins_resize(int, PedSector, PedSector, PedGeometry, PedPartitionType); ++ void ins_move(int, PedSector, PedSector, PedGeometry, PedPartitionType); ++ void ins_rm(int); ++ void ins_mkfs(QP_FileSystemSpec *, int, QString, PedGeometry, PedPartitionType); ++ void ins_mkpart(QTParted::partType, PedSector, PedSector, QP_FileSystemSpec *, QString, PedGeometry, PedPartitionType); ++ void ins_active(int, bool); ++ void ins_hidden(int, bool); ++ void get_partinfo(QP_PartInfo *, PedPartition *); ++ bool canUndo(); //Does the user can undo/commit? ++ void undo(); //undo last operation ++ void commit(); //commit all operations ++ PedDisk *disk(); //return the actual state of the disk ++ QP_PartInfo *partActive(); //return the partinfo that is bootable ++ QPtrList partlist; ++ QPtrList logilist; + + private: +- void partition_get_flags(QP_PartInfo *, PedPartition *); //will get the active flag +- void ins_newdisk(); +- QPtrList actlist; +- QPtrList listdisk; +- PedDisk *_disk; +- QP_LibParted *_libparted; +- QP_PartInfo *_partActive; //a pointer to the partinfo that is current active (ie bootable) +- QPtrList orig_partlist; +- QPtrList orig_logilist; ++ void partition_get_flags(QP_PartInfo *, PedPartition *); //will get the active flag ++ void ins_newdisk(); ++ QPtrList actlist; ++ QPtrList listdisk; ++ PedDisk *_disk; ++ QP_LibParted *_libparted; ++ QP_PartInfo *_partActive; //a pointer to the partinfo that is current active (ie bootable) ++ QPtrList orig_partlist; ++ QPtrList orig_logilist; + + signals: +- /*---emitted when the state of the disk was changed---*/ +- void sigDiskChanged(); +- void sigOperations(QString, QString, int, int); ++ /*---emitted when the state of the disk was changed---*/ ++ void sigDiskChanged(); ++ void sigOperations(QString, QString, int, int); + }; +- +- + #endif +diff -urNad qtparted-0.4.5~/src/qp_combospin.cpp qtparted-0.4.5/src/qp_combospin.cpp +--- qtparted-0.4.5~/src/qp_combospin.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_combospin.cpp 2006-03-01 20:53:21.492252648 +0000 +@@ -24,50 +24,51 @@ + #include "qp_options.h" + + QP_ComboSpin::QP_ComboSpin(QWidget *parent, const char *name) +- :QWidget(parent, name) { +- layout = new QHBoxLayout(this); //, "layout"); ++ :QWidget(parent, name) ++{ ++ layout = new QHBoxLayout(this); //, "layout"); + +- spinbox = new QP_SpinBox(this, "spinbox"); +- spinbox->setSizePolicy(QSizePolicy((QSizePolicy::SizeType)7, (QSizePolicy::SizeType)0, 0, 0, spinbox->sizePolicy().hasHeightForWidth())); ++ spinbox = new QP_SpinBox(this, "spinbox"); ++ spinbox->setSizePolicy(QSizePolicy((QSizePolicy::SizeType)7, (QSizePolicy::SizeType)0, 0, 0, spinbox->sizePolicy().hasHeightForWidth())); + +- layout->addWidget(spinbox); +- connect(spinbox, SIGNAL(valueChanged(PedSector)), +- this, SIGNAL(valueChanged(PedSector))); ++ layout->addWidget(spinbox); ++ connect(spinbox, SIGNAL(valueChanged(PedSector)), ++ this, SIGNAL(valueChanged(PedSector))); + +- combobox = new QComboBox(false, this, "combobox"); +- combobox->setSizePolicy(QSizePolicy( (QSizePolicy::SizeType)1, (QSizePolicy::SizeType)0, 0, 0, combobox->sizePolicy().hasHeightForWidth())); +- connect(combobox, SIGNAL(activated(int)), +- spinbox, SLOT(setFormat(int))); +- layout->addWidget(combobox); ++ combobox = new QComboBox(false, this, "combobox"); ++ combobox->setSizePolicy(QSizePolicy( (QSizePolicy::SizeType)1, (QSizePolicy::SizeType)0, 0, 0, combobox->sizePolicy().hasHeightForWidth())); ++ connect(combobox, SIGNAL(activated(int)), ++ spinbox, SLOT(setFormat(int))); ++ layout->addWidget(combobox); + +- combobox->clear(); +- combobox->insertItem("MB"); +- combobox->insertItem("GB"); ++ combobox->clear(); ++ combobox->insertItem("MB"); ++ combobox->insertItem("GB"); + } + + QP_ComboSpin::~QP_ComboSpin() { + } + + void QP_ComboSpin::setRange(PedSector min, PedSector max) { +- spinbox->setRange(min, max); ++ spinbox->setRange(min, max); + } + + void QP_ComboSpin::setValue(PedSector val) { +- spinbox->setValue(val); ++ spinbox->setValue(val); + } + + void QP_ComboSpin::setMaxValue(PedSector max) { +- spinbox->setMaxValue(max); ++ spinbox->setMaxValue(max); + } + + void QP_ComboSpin::setMinValue(PedSector min) { +- spinbox->setMinValue(min); ++ spinbox->setMinValue(min); + } + + PedSector QP_ComboSpin::value() { +- return spinbox->pedValue(); ++ return spinbox->pedValue(); + } + + PedSector QP_ComboSpin::maxValue() { +- return spinbox->pedMaxValue(); ++ return spinbox->pedMaxValue(); + } +diff -urNad qtparted-0.4.5~/src/qp_combospin.h qtparted-0.4.5/src/qp_combospin.h +--- qtparted-0.4.5~/src/qp_combospin.h 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_combospin.h 2006-03-01 20:53:21.493252496 +0000 +@@ -33,24 +33,23 @@ + #define QP_COMBOSPIN_H + + class QP_ComboSpin : public QWidget { +-Q_OBJECT ++ Q_OBJECT + public: +- QP_ComboSpin(QWidget *parent = 0L, const char *name = 0L); +- ~QP_ComboSpin(); +- void setRange(PedSector, PedSector); +- void setMaxValue(PedSector); +- void setMinValue(PedSector); +- void setValue(PedSector); +- PedSector value(); +- PedSector maxValue(); ++ QP_ComboSpin(QWidget *parent = 0L, const char *name = 0L); ++ ~QP_ComboSpin(); ++ void setRange(PedSector, PedSector); ++ void setMaxValue(PedSector); ++ void setMinValue(PedSector); ++ void setValue(PedSector); ++ PedSector value(); ++ PedSector maxValue(); + + signals: +- void valueChanged(PedSector); ++ void valueChanged(PedSector); + + protected: +- QHBoxLayout *layout; +- QComboBox *combobox; +- QP_SpinBox *spinbox; ++ QHBoxLayout *layout; ++ QComboBox *combobox; ++ QP_SpinBox *spinbox; + }; +- + #endif +diff -urNad qtparted-0.4.5~/src/qp_devlist.cpp qtparted-0.4.5/src/qp_devlist.cpp +--- qtparted-0.4.5~/src/qp_devlist.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_devlist.cpp 2006-03-01 20:53:21.493252496 +0000 +@@ -248,7 +248,7 @@ + // Workaround for parted detecting CD-ROMs as harddisks + // FIXME remove if/when parted gets fixed + QString p(dev->path); +- if(!p.startsWith("/dev/sd") && (p.contains("/dev/scd") || p.contains("/dev/sr"))) ++ if(!p.startsWith("/dev/sd") && (p.contains("/dev/scd") || p.contains("/dev/sr") || access("/proc/ide/" + p.section('/', 2, 2) + "/cache", R_OK))) + continue; + + QP_Device *device = new QP_Device(_settings); +diff -urNad qtparted-0.4.5~/src/qp_fswrap.cpp qtparted-0.4.5/src/qp_fswrap.cpp +--- qtparted-0.4.5~/src/qp_fswrap.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_fswrap.cpp 2006-03-01 20:53:21.493252496 +0000 +@@ -43,12 +43,15 @@ + + #define my_min(a,b) ((a)<(b) ? (a):(b)) + +-bool QP_FSWrap::fs_open(QString cmdline) { ++bool QP_FSWrap::fs_open(QString cmdline, bool localized) { + +- /*---this force stderr to stdout---*/ ++ /*---this force stderr to stdout and a parsable language---*/ + QString dupcmdline = QString("%1 %2") +- .arg(cmdline) +- .arg(QString("2>&1")); ++ .arg(cmdline) ++ .arg(QString("2>&1")); ++ ++ if(!localized) ++ dupcmdline="LC_ALL=POSIX " + dupcmdline; + + /*---open a pipe from the command line---*/ + fp = popen(dupcmdline, "r"); +@@ -149,7 +152,7 @@ + .arg(lstExternalTools->getPath(MOUNT)) + .arg(szcmdline); + +- if (!fs_open(cmdline)) { ++ if (!fs_open(cmdline, true)) { + _message = QString(NOTFOUND); + return false; + } +diff -urNad qtparted-0.4.5~/src/qp_fswrap.h qtparted-0.4.5/src/qp_fswrap.h +--- qtparted-0.4.5~/src/qp_fswrap.h 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_fswrap.h 2006-03-01 20:53:21.493252496 +0000 +@@ -161,7 +161,7 @@ + protected: + bool qpMount(QString device); + bool qpUMount(QString device); +- bool fs_open(QString cmdline); ++ bool fs_open(QString cmdline, bool localized=false); + char *fs_getline(); + int fs_close(); + QString _message; +diff -urNad qtparted-0.4.5~/src/qp_partition.cpp qtparted-0.4.5/src/qp_partition.cpp +--- qtparted-0.4.5~/src/qp_partition.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_partition.cpp 2006-03-01 20:53:21.493252496 +0000 +@@ -22,8 +22,7 @@ + #include "qp_partition.h" + #include "qp_options.h" + +-QP_Partition::QP_Partition(QP_PartInfo *pinfo, QWidget *parent, const char *name, WFlags f) +- :QP_PartWidget(pinfo, parent, name, f) { ++QP_Partition::QP_Partition(QP_PartInfo *pinfo, QWidget *parent, const char *name, WFlags f):QP_PartWidget(pinfo, parent, name, f) { + } + + QP_Partition::~QP_Partition() { +diff -urNad qtparted-0.4.5~/src/qp_partition.h qtparted-0.4.5/src/qp_partition.h +--- qtparted-0.4.5~/src/qp_partition.h 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_partition.h 2006-03-01 20:53:21.493252496 +0000 +@@ -36,8 +36,8 @@ + Q_OBJECT + + public: +- QP_Partition(QP_PartInfo *, QWidget *parent=0, const char *name=0, WFlags f = 0); +- ~QP_Partition(); ++ QP_Partition(QP_PartInfo *, QWidget *parent=0, const char *name=0, WFlags f = 0); ++ ~QP_Partition(); + }; + + #endif +diff -urNad qtparted-0.4.5~/src/qp_partlist.cpp qtparted-0.4.5/src/qp_partlist.cpp +--- qtparted-0.4.5~/src/qp_partlist.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_partlist.cpp 2006-03-01 20:53:21.494252344 +0000 +@@ -23,29 +23,29 @@ + #include "qp_options.h" + + QP_PartList::QP_PartList(QWidget *parent, const char *name, WFlags f) +- :QWidget(parent, name, f) { ++ :QWidget(parent, name, f) { + } + + QP_PartList::~QP_PartList() { + } + + QP_PartInfo *QP_PartList::selPartInfo() { +- return _selPartInfo; ++ return _selPartInfo; + } + + void QP_PartList::setselPartInfo(QP_PartInfo *partinfo) { +- _selPartInfo = partinfo; ++ _selPartInfo = partinfo; + } + + void QP_PartList::clear() { + } + + QP_Device *QP_PartList::device() { +- return _device; ++ return _device; + } + + void QP_PartList::setDevice(QP_Device *device) { +- _device = device; ++ _device = device; + } + + void QP_PartList::addPrimary(QP_PartInfo *) { +@@ -58,9 +58,9 @@ + } + + float QP_PartList::mb_hdsize() { +- return _mb_hdsize; ++ return _mb_hdsize; + } + + void QP_PartList::set_mb_hdsize(float mb_hdsize) { +- _mb_hdsize = mb_hdsize; ++ _mb_hdsize = mb_hdsize; + } +diff -urNad qtparted-0.4.5~/src/qp_partlist.h qtparted-0.4.5/src/qp_partlist.h +--- qtparted-0.4.5~/src/qp_partlist.h 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_partlist.h 2006-03-01 20:53:21.494252344 +0000 +@@ -34,33 +34,32 @@ + #include "qp_libparted.h" + + class QP_PartList : public QWidget { +-Q_OBJECT +- ++ Q_OBJECT + public: +- QP_PartList(QWidget *parent=0, const char *name=0, WFlags f = 0); +- ~QP_PartList(); +- QP_PartInfo *selPartInfo(); /*---return selected partition ---*/ +- void setselPartInfo(QP_PartInfo *); /*---change the selected partition ---*/ +- void clear(); /*---clear the chart ---*/ +- QP_Device *device(); /*---return the device ---*/ +- void setDevice(QP_Device *); /*---set the Device ---*/ +- void addPrimary(QP_PartInfo *); /*---add a Primary or Extended partition ---*/ +- void addLogical(QP_PartInfo *); /*---add a Logical partition ---*/ +- void draw(); /*---repaint the widget ---*/ +- float mb_hdsize(); /*---return the size of the hardisk ---*/ +- void set_mb_hdsize(float); /*---set the size of the hardisk ---*/ ++ QP_PartList(QWidget *parent=0, const char *name=0, WFlags f = 0); ++ ~QP_PartList(); ++ QP_PartInfo *selPartInfo(); /*---return selected partition ---*/ ++ void setselPartInfo(QP_PartInfo *); /*---change the selected partition ---*/ ++ void clear(); /*---clear the chart ---*/ ++ QP_Device *device(); /*---return the device ---*/ ++ void setDevice(QP_Device *); /*---set the Device ---*/ ++ void addPrimary(QP_PartInfo *); /*---add a Primary or Extended partition ---*/ ++ void addLogical(QP_PartInfo *); /*---add a Logical partition ---*/ ++ void draw(); /*---repaint the widget ---*/ ++ float mb_hdsize(); /*---return the size of the hardisk ---*/ ++ void set_mb_hdsize(float); /*---set the size of the hardisk ---*/ + + private: +- float _mb_hdsize; /*---size of the harddisk in megabyte ---*/ +- QP_Device *_device; /*---the device ---*/ ++ float _mb_hdsize; /*---size of the harddisk in megabyte ---*/ ++ QP_Device *_device; /*---the device ---*/ + + protected: +- QP_PartInfo *_selPartInfo; /*---partition selected ---*/ ++ QP_PartInfo *_selPartInfo; /*---partition selected ---*/ + + signals: +- void sigSelectPart(QP_PartInfo *); /*---emitted when you change the selection ---*/ +- void sigDevicePopup(QPoint); /*---emitted when you want to popup (device)---*/ +- void sigPopup(QPoint); /*---emitted when you want to pop (partition)--*/ ++ void sigSelectPart(QP_PartInfo *); /*---emitted when you change the selection ---*/ ++ void sigDevicePopup(QPoint); /*---emitted when you want to popup (device)---*/ ++ void sigPopup(QPoint); /*---emitted when you want to pop (partition)--*/ + }; + + #endif +diff -urNad qtparted-0.4.5~/src/qp_spinbox.cpp qtparted-0.4.5/src/qp_spinbox.cpp +--- qtparted-0.4.5~/src/qp_spinbox.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_spinbox.cpp 2006-03-01 20:53:21.494252344 +0000 +@@ -25,24 +25,22 @@ + #include "qp_options.h" + + QP_SpinBox::QP_SpinBox(QWidget *parent, const char *name) +- :QSpinBox (parent, name) { +- /*---initialization of the default value---*/ +- _floatminval = 0; +- _floatmaxval = 0; +- _pedminval = 0; +- _pedmaxval = 0; +- _pedvalue = 0; +- step = 1; +- _floatvalue = 0; +- _format = 0; +- _update = true; +- +- /*---format of the displayed string (ie: 999.99)---*/ +- format = "%3.2f"; +- setValue((float)0); +- setSteps(10, 10); +- val = new QDoubleValidator(_floatminval, _floatmaxval, 2, this); +- setValidator (val); ++ :QSpinBox (parent, name) ++ ,_floatminval(0) ++ ,_floatmaxval(0) ++ ,_pedminval(0) ++ ,_pedmaxval(0) ++ ,step(1) ++ ,_floatvalue(0) ++ ,_format(0) ++ ,_update(true) ++{ ++ /*---format of the displayed string (ie: 999.99)---*/ ++ format = "%3.2f"; ++ setValue((float)0); ++ setSteps(10, 10); ++ val = new QDoubleValidator(_floatminval, _floatmaxval, 2, this); ++ setValidator (val); + } + + +@@ -51,189 +49,204 @@ + + + void QP_SpinBox::setFormatString (const char *fmt) { +- format = fmt; ++ format = fmt; + } + + + /*---change between mbyte and gbyte---*/ + void QP_SpinBox::setFormat(int format) { +- _format = format; +- float f_minvalue = 0; +- float f_maxvalue = 0; +- float f_value = 0; ++ _format = format; ++ float f_minvalue = 0; ++ float f_maxvalue = 0; ++ float f_value = 0; + +- if (_format == 0) { f_minvalue = float(_pedminval * 1.0 / MBYTE_SECTORS); +- f_maxvalue = float(_pedmaxval * 1.0 / MBYTE_SECTORS); +- f_value = float(_pedvalue * 1.0 / MBYTE_SECTORS); } else +- if (_format == 1) { f_minvalue = float(_pedminval * 1.0 / GBYTE_SECTORS); +- f_maxvalue = float(_pedmaxval * 1.0 / GBYTE_SECTORS); +- f_value = float(_pedvalue * 1.0 / GBYTE_SECTORS); } ++ if (_format == 0) { ++ f_minvalue = float(_pedminval * 1.0 / MBYTE_SECTORS); ++ f_maxvalue = float(_pedmaxval * 1.0 / MBYTE_SECTORS); ++ f_value = float(_pedvalue * 1.0 / MBYTE_SECTORS); ++ } else if (_format == 1) { ++ f_minvalue = float(_pedminval * 1.0 / GBYTE_SECTORS); ++ f_maxvalue = float(_pedmaxval * 1.0 / GBYTE_SECTORS); ++ f_value = float(_pedvalue * 1.0 / GBYTE_SECTORS); ++ } + +- /*---don't update internal ped values!---*/ +- _update = false; +- setRange(f_minvalue, f_maxvalue); +- setValue(f_value); +- _update = true; ++ /*---don't update internal ped values!---*/ ++ _update = false; ++ setRange(f_minvalue, f_maxvalue); ++ setValue(f_value); ++ _update = true; + } + +- + void QP_SpinBox::setValue(float value) { +- char buf[20]; +- if (_floatminval <= value && value <= _floatmaxval) { +- sprintf (buf, (const char *) format, value); +- _floatvalue = value; +- QSpinBox::setValue(int(value * 100.0)); +- } ++ char buf[20]; ++ if (_floatminval <= value && value <= _floatmaxval) { ++ sprintf (buf, (const char *) format, value); ++ _floatvalue = value; ++ QSpinBox::setValue(int(value * 100.0)); ++ } + } + + + void QP_SpinBox::setValue(PedSector value) { +- if (_pedminval <= value && value <= _pedmaxval) { +- float f_value = 0; ++ if (_pedminval <= value && value <= _pedmaxval) { ++ float f_value = 0; + +- if (_format == 0) f_value = float(value * 1.0 / MBYTE_SECTORS); else +- if (_format == 1) f_value = float(value * 1.0 / GBYTE_SECTORS); ++ if (_format == 0) ++ f_value = float(value * 1.0 / MBYTE_SECTORS); else ++ if (_format == 1) ++ f_value = float(value * 1.0 / GBYTE_SECTORS); + +- _pedvalue = value; ++ _pedvalue = value; + +- /*---don't update internal ped values!---*/ +- _update = false; +- setValue(f_value); +- _update = true; +- } ++ /*---don't update internal ped values!---*/ ++ _update = false; ++ setValue(f_value); ++ _update = true; ++ } + } + + + void QP_SpinBox::setMaxValue(PedSector maxVal) { +- float f_maxvalue = 0; ++ float f_maxvalue = 0; + +- _pedmaxval = maxVal; ++ _pedmaxval = maxVal; + +- if (_format == 0) {f_maxvalue = float(maxVal * 1.0 / MBYTE_SECTORS);} else +- if (_format == 1) {f_maxvalue = float(maxVal * 1.0 / GBYTE_SECTORS);} ++ if (_format == 0) ++ f_maxvalue = float(maxVal * 1.0 / MBYTE_SECTORS); ++ else if (_format == 1) ++ f_maxvalue = float(maxVal * 1.0 / GBYTE_SECTORS); + +- setMaxValue(f_maxvalue); ++ setMaxValue(f_maxvalue); + } + + + void QP_SpinBox::setMinValue(PedSector minVal) { +- float f_minvalue = 0; ++ float f_minvalue = 0; + +- _pedminval = minVal; ++ _pedminval = minVal; + +- if (_format == 0) {f_minvalue = float(minVal * 1.0 / MBYTE_SECTORS);} else +- if (_format == 1) {f_minvalue = float(minVal * 1.0 / GBYTE_SECTORS);} ++ if (_format == 0) ++ f_minvalue = float(minVal * 1.0 / MBYTE_SECTORS); ++ else if (_format == 1) ++ f_minvalue = float(minVal * 1.0 / GBYTE_SECTORS); + +- setMinValue(f_minvalue); ++ setMinValue(f_minvalue); + } + + + void QP_SpinBox::setStep (float s) { +- step = s; +- setSteps ((int)(step * 10.0), (int)(step * 10.0)); ++ step = s; ++ setSteps ((int)(step * 10.0), (int)(step * 10.0)); + } + +- + float QP_SpinBox::getStep() const { +- return step; ++ return step; + } + +- + void QP_SpinBox::setRange(float minVal, float maxVal) { +- if (minVal <= maxVal) { +- _floatminval = minVal; +- _floatmaxval = maxVal; +- QRangeControl::setRange(int(minVal * 100.0), int(maxVal * 100.0)); +- val->setRange(minVal, maxVal, 2); +- } ++ if (minVal <= maxVal) { ++ _floatminval = minVal; ++ _floatmaxval = maxVal; ++ QRangeControl::setRange(int(minVal * 100.0), int(maxVal * 100.0)); ++ val->setRange(minVal, maxVal, 2); ++ } + } + + + void QP_SpinBox::setRange(PedSector minVal, PedSector maxVal) { +- float f_minvalue = 0; +- float f_maxvalue = 0; ++ float f_minvalue = 0; ++ float f_maxvalue = 0; + +- _pedminval = minVal; +- _pedmaxval = maxVal; ++ _pedminval = minVal; ++ _pedmaxval = maxVal; + +- if (_format == 0) { f_minvalue = float(minVal * 1.0 / MBYTE_SECTORS); +- f_maxvalue = float(maxVal * 1.0 / MBYTE_SECTORS); } else +- if (_format == 1) { f_minvalue = float(minVal * 1.0 / GBYTE_SECTORS); +- f_maxvalue = float(maxVal * 1.0 / GBYTE_SECTORS); } ++ if (_format == 0) { f_minvalue = float(minVal * 1.0 / MBYTE_SECTORS); ++ f_maxvalue = float(maxVal * 1.0 / MBYTE_SECTORS); } else ++ if (_format == 1) { f_minvalue = float(minVal * 1.0 / GBYTE_SECTORS); ++ f_maxvalue = float(maxVal * 1.0 / GBYTE_SECTORS); } + +- setRange(f_minvalue, f_maxvalue); ++ setRange(f_minvalue, f_maxvalue); + } + + + void QP_SpinBox::getRange(float &minVal, float &maxVal) { +- minVal = _floatminval; +- maxVal = _floatmaxval; ++ minVal = _floatminval; ++ maxVal = _floatmaxval; + } + + PedSector QP_SpinBox::pedValue() { +- return _pedvalue; ++ return _pedvalue; + } + + PedSector QP_SpinBox::pedMaxValue() { +- return _pedmaxval; ++ return _pedmaxval; + } + + void QP_SpinBox::stepUp() { +- QSpinBox::stepUp(); ++ QSpinBox::stepUp(); + +- int diff = int(_floatmaxval * 100.0) - int(_floatvalue * 100.0); +- if (diff <= 1) _pedvalue = _pedmaxval; ++ int diff = int(_floatmaxval * 100.0) - int(_floatvalue * 100.0); ++ if (diff <= 1) _pedvalue = _pedmaxval; + } + + void QP_SpinBox::stepDown() { +- QSpinBox::stepDown(); ++ QSpinBox::stepDown(); + +- int diff = int(_floatvalue * 100.0) - int(_floatminval * 100.0); +- if (diff <= 1) _pedvalue = _pedminval; ++ int diff = int(_floatvalue * 100.0) - int(_floatminval * 100.0); ++ if (diff <= 1) _pedvalue = _pedminval; + } + + void QP_SpinBox::setMaxValue(float maxvalue) { +- _floatmaxval = maxvalue; +- QSpinBox::setMaxValue(int(maxvalue * 100.0)); ++ _floatmaxval = maxvalue; ++ QSpinBox::setMaxValue(int(maxvalue * 100.0)); + } + + void QP_SpinBox::setMinValue(float minvalue) { +- _floatminval = minvalue; +- QSpinBox::setMinValue(int(minvalue * 100.0)); ++ _floatminval = minvalue; ++ QSpinBox::setMinValue(int(minvalue * 100.0)); + } + + void QP_SpinBox::valueChange() { +- bool rc; +- updateDisplay(); +- mapTextToValue(&rc); ++ bool rc; ++ updateDisplay(); ++ mapTextToValue(&rc); + +- /*---don't update internal ped values!---*/ +- if (_update) +- if (_floatvalue == _floatminval) _pedvalue = _pedminval; else +- if (_floatvalue == _floatmaxval) _pedvalue = _pedmaxval; else { +- if (_format == 0) _pedvalue = PedSector(_floatvalue * MBYTE_SECTORS); else +- if (_format == 1) _pedvalue = PedSector(_floatvalue * GBYTE_SECTORS); +- } ++ /*---don't update internal ped values!---*/ ++ if (_update) { ++ if (_floatvalue == _floatminval) ++ _pedvalue = _pedminval; ++ else if (_floatvalue == _floatmaxval) ++ _pedvalue = _pedmaxval; ++ else { ++ if (_format == 0) ++ _pedvalue = PedSector(_floatvalue * MBYTE_SECTORS); ++ else if (_format == 1) ++ _pedvalue = PedSector(_floatvalue * GBYTE_SECTORS); ++ } ++ } + +- /*---ped value should be beetween min and max---*/ +- if (_pedvalue < _pedminval) _pedvalue = _pedminval; +- if (_pedvalue > _pedmaxval) _pedvalue = _pedmaxval; ++ /*---ped value should be beetween min and max---*/ ++ if (_pedvalue < _pedminval) ++ _pedvalue = _pedminval; + +- emit valueChanged(_pedvalue); ++ if (_pedvalue > _pedmaxval) ++ _pedvalue = _pedmaxval; ++ ++ emit valueChanged(_pedvalue); + } + + + int QP_SpinBox::mapTextToValue(bool *ok) { +- const char *txt = text(); +- _floatvalue = atof(txt); +- *ok = true; +- return int(_floatvalue * 100.0); ++ const char *txt = text(); ++ _floatvalue = atof(txt); ++ *ok = true; ++ return int(_floatvalue * 100.0); + } + + + QString QP_SpinBox::mapValueToText(int v) { +- float f = float(v) / 100.0; +- QString buf; +- buf.sprintf((const char *)format, f); +- return buf; ++ float f = float(v) / 100.0; ++ QString buf; ++ buf.sprintf((const char *)format, f); ++ return buf; + } +diff -urNad qtparted-0.4.5~/src/qp_spinbox.h qtparted-0.4.5/src/qp_spinbox.h +--- qtparted-0.4.5~/src/qp_spinbox.h 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_spinbox.h 2006-03-01 20:53:21.494252344 +0000 +@@ -42,51 +42,50 @@ + typedef long long PedSector; + + class QP_SpinBox : public QSpinBox { +- Q_OBJECT ++ Q_OBJECT + public: +- QP_SpinBox(QWidget *parent = 0L, const char *name = 0L); +- ~QP_SpinBox(); ++ QP_SpinBox(QWidget *parent = 0L, const char *name = 0L); ++ ~QP_SpinBox(); + +- void setFormatString(const char *fmt); ++ void setFormatString(const char *fmt); + +- void setValue(PedSector); +- void setMaxValue(PedSector); +- void setMinValue(PedSector); ++ void setValue(PedSector); ++ void setMaxValue(PedSector); ++ void setMinValue(PedSector); + +- void setStep(float step); +- float getStep() const; ++ void setStep(float step); ++ float getStep() const; + +- void setRange(PedSector minVal, PedSector maxVal); +- void getRange(float &minVal, float &maxVal); +- PedSector pedValue(); +- PedSector pedMaxValue(); ++ void setRange(PedSector minVal, PedSector maxVal); ++ void getRange(float &minVal, float &maxVal); ++ PedSector pedValue(); ++ PedSector pedMaxValue(); + + signals: +- void valueChanged(PedSector); ++ void valueChanged(PedSector); + + public slots: +- virtual void stepUp(); +- virtual void stepDown(); +- void setMaxValue(float); +- void setMinValue(float); +- void setFormat(int); ++ virtual void stepUp(); ++ virtual void stepDown(); ++ void setMaxValue(float); ++ void setMinValue(float); ++ void setFormat(int); + + protected: +- int mapTextToValue(bool *ok); +- QString mapValueToText(int v); +- void valueChange(); ++ int mapTextToValue(bool *ok); ++ QString mapValueToText(int v); ++ void valueChange(); + + private: +- void setRange(float minVal, float maxVal); +- void setValue(float value); +- float step, _floatminval, _floatmaxval, _floatvalue; +- QString format; +- QDoubleValidator *val; +- PedSector _pedminval; +- PedSector _pedmaxval; +- PedSector _pedvalue; +- int _format; +- bool _update; ++ void setRange(float minVal, float maxVal); ++ void setValue(float value); ++ float step, _floatminval, _floatmaxval, _floatvalue; ++ QString format; ++ QDoubleValidator *val; ++ PedSector _pedminval; ++ PedSector _pedmaxval; ++ PedSector _pedvalue; ++ int _format; ++ bool _update; + }; +- + #endif +diff -urNad qtparted-0.4.5~/src/qp_window.cpp qtparted-0.4.5/src/qp_window.cpp +--- qtparted-0.4.5~/src/qp_window.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_window.cpp 2006-03-01 20:53:21.495252192 +0000 +@@ -93,14 +93,14 @@ + /*---the window is so designed: + * + * .------------------------------. +- * |QSplitter | | +- * | | | ++ * |QSplitter | | ++ * | | | + * | +----------+ | +-----------+ | + * | |NavView | | |DiskView | | +- * | | | | | | | +- * | | | | | | | ++ * | | | | | | | ++ * | | | | | | | + * | +----------+ | +-----------+ | +- * | | | ++ * | | | + * `------------------------------' + */ + +@@ -115,16 +115,16 @@ + navSplit->setResizeMode(navview, QSplitter::KeepSize); + /*---connect the selected signal (when user, for example, select /dev/hda)---*/ + connect(navview, SIGNAL(sigSelectDevice(QP_Device *)), +- this, SLOT(slotSelectDevice(QP_Device *))); ++ this, SLOT(slotSelectDevice(QP_Device *))); + + /*---add the DiskView widget---*/ + diskview = new QP_DiskView(navSplit); + /*---emitted when you select a partition---*/ + connect(diskview, SIGNAL(sigSelectPart(QP_PartInfo *)), +- this, SLOT(slotSelectPart(QP_PartInfo *))); ++ this, SLOT(slotSelectPart(QP_PartInfo *))); + /*---emit when the user want to popup the context menu---*/ + connect(diskview, SIGNAL(sigPopup(QPoint)), +- this, SLOT(slotPopup(QPoint))); ++ this, SLOT(slotPopup(QPoint))); + connect(diskview, SIGNAL(sigDevicePopup(QPoint)), + this, SLOT(slotDevicePopup(QPoint))); + /*---connect the sigTimer used for dlgprogress during "update progressbar"---*/ +diff -urNad qtparted-0.4.5~/src/qp_window.h qtparted-0.4.5/src/qp_window.h +--- qtparted-0.4.5~/src/qp_window.h 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/qp_window.h 2006-03-01 20:53:21.495252192 +0000 +@@ -49,89 +49,87 @@ + + + class QP_MainWindow : public QMainWindow { +-Q_OBJECT +- ++ Q_OBJECT + public: +- QP_MainWindow(QP_Settings *, QWidget *parent, const char *name); +- ~QP_MainWindow(); +- void init(); /*---init the mainwindow ---*/ +- void refreshDiskView(); +- void setpopupmenu(QPopupMenu *); +- QPopupMenu *popupmenu(); +- QPopupMenu *mnuDisks; +- QPopupMenu *mnuDevice; +- QAction *actUndo; +- QAction *actCommit; +- QAction *actQuit; +- QAction *actProperty; +- QAction *actCreate; +- QAction *actFormat; +- QAction *actResize; +- QAction *actMove; +- QAction *actDelete; +- QAction *actConfig; +- QAction *actWhatThis; +- QAction *actAbout; +- QAction *actAboutQT; +- QAction *actNavProperty; +- QAction *actNavPartTable; +- QP_DiskView *diskview; +- QP_dlgCreate *dlgcreate; /*---the create dialog ---*/ +- QP_dlgFormat *dlgformat; /*---the format dialog ---*/ +- QP_dlgResize *dlgresize; /*---the resize dialog ---*/ +- QP_dlgProgress *dlgprogress; /*---the progress dialog ---*/ +- QP_dlgConfig *dlgconfig; /*---the configuration dialog ---*/ +- QP_dlgDevProperty *dlgdevprop; /*---the device property dialog---*/ +- QP_NavView *navview; /*---the disk navigation widget---*/ +- QP_Settings *settings; +- ++ QP_MainWindow(QP_Settings *, QWidget *parent, const char *name); ++ ~QP_MainWindow(); ++ void init(); /*---init the mainwindow ---*/ ++ void refreshDiskView(); ++ void setpopupmenu(QPopupMenu *); + + protected: +- void createAction(); +- void addMenuBar(); +- void addStatusBar(); +- void addToolBar(); +- void buildDisksMenu(); +- void loadSettings(); +- void ShowMoveResizeDialog(QTParted::actType moveresize); +- void InitMenu(); +- void InitProgressDialog(); +- void DoneProgressDialog(); ++ QPopupMenu *popupmenu(); ++ QPopupMenu *mnuDisks; ++ QPopupMenu *mnuDevice; ++ QAction *actUndo; ++ QAction *actCommit; ++ QAction *actQuit; ++ QAction *actProperty; ++ QAction *actCreate; ++ QAction *actFormat; ++ QAction *actResize; ++ QAction *actMove; ++ QAction *actDelete; ++ QAction *actConfig; ++ QAction *actWhatThis; ++ QAction *actAbout; ++ QAction *actAboutQT; ++ QAction *actNavProperty; ++ QAction *actNavPartTable; ++ QP_DiskView *diskview; ++ QP_dlgCreate *dlgcreate; /*---the create dialog ---*/ ++ QP_dlgFormat *dlgformat; /*---the format dialog ---*/ ++ QP_dlgResize *dlgresize; /*---the resize dialog ---*/ ++ QP_dlgProgress *dlgprogress; /*---the progress dialog ---*/ ++ QP_dlgConfig *dlgconfig; /*---the configuration dialog ---*/ ++ QP_dlgDevProperty *dlgdevprop; /*---the device property dialog---*/ ++ QP_NavView *navview; /*---the disk navigation widget---*/ ++ QP_Settings *settings; + ++protected: ++ void createAction(); ++ void addMenuBar(); ++ void addStatusBar(); ++ void addToolBar(); ++ void buildDisksMenu(); ++ void loadSettings(); ++ void ShowMoveResizeDialog(QTParted::actType moveresize); ++ void InitMenu(); ++ void InitProgressDialog(); ++ void DoneProgressDialog(); + + private: +- QVBox *central; +- QPopupMenu* _popupmenu; +- QPopupMenu* _navpopupmenu; +- QPopupMenu *mnuOperations; +- int mnuSetActiveID; +- int mnuSetHiddenID; ++ QVBox *central; ++ QPopupMenu* _popupmenu; ++ QPopupMenu* _navpopupmenu; ++ QPopupMenu *mnuOperations; ++ int mnuSetActiveID; ++ int mnuSetHiddenID; + + protected slots: +- void slotCreate(); +- void slotFormat(); +- void slotResize(); +- void slotMove(); +- void slotDelete(); +- void slotConfig(); +- void slotProperty(); +- void slotWhatsThis(); +- void slotAbout(); +- void slotAboutQT(); +- void slotNavProperty(); +- void slotNavPartTable(); +- void slotSelectPart(QP_PartInfo *); +- void slotDevicePopup(QPoint pos); +- void slotPopup(QPoint pos); +- void slotSelectDevice(QP_Device *); +- void slotSetActive(); +- void slotSetHidden(); +- void slotUndo(); +- void slotCommit(); +- void slotDiskChanged(); ++ void slotCreate(); ++ void slotFormat(); ++ void slotResize(); ++ void slotMove(); ++ void slotDelete(); ++ void slotConfig(); ++ void slotProperty(); ++ void slotWhatsThis(); ++ void slotAbout(); ++ void slotAboutQT(); ++ void slotNavProperty(); ++ void slotNavPartTable(); ++ void slotSelectPart(QP_PartInfo *); ++ void slotDevicePopup(QPoint pos); ++ void slotPopup(QPoint pos); ++ void slotSelectDevice(QP_Device *); ++ void slotSetActive(); ++ void slotSetHidden(); ++ void slotUndo(); ++ void slotCommit(); ++ void slotDiskChanged(); + + signals: +- void sigSplashInfo(const QString &); ++ void sigSplashInfo(const QString &); + }; +- + #endif +diff -urNad qtparted-0.4.5~/src/runprog.cpp qtparted-0.4.5/src/runprog.cpp +--- qtparted-0.4.5~/src/runprog.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/runprog.cpp 1970-01-01 00:00:00.000000000 +0000 +@@ -1,160 +0,0 @@ +-/*************************************************************************** +- runprog.cpp - description +- ------------------- +- begin : Wed Sep 4 19:21:54 UTC 2002 +- copyright : (C) 2002 by Francois Dupoux +- email : fdupoux@partimage.org +- ***************************************************************************/ +- +-/*************************************************************************** +- * * +- * This program is free software; you can redistribute it and/or modify * +- * it under the terms of the GNU General Public License as published by * +- * the Free Software Foundation; either version 2 of the License, or * +- * (at your option) any later version. * +- * * +- ***************************************************************************/ +- +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +- +-#include "runprog.h" +-#include "qp_options.h" +- +-//------------------------------------------------ +-/*int doesFileExists2(char *szPath) +-{ +-#ifdef HAVE_FSTAT64 +- struct stat64 fStat; +-#else +- struct stat fStat; +-#endif +- int nFd; +- int nRes; +- +- errno = 0; +-#ifdef HAVE_OPEN64 +- nFd = open64(szPath, O_RDONLY | O_NOFOLLOW | O_LARGEFILE); +-#else +- nFd = open(szPath, O_RDONLY | O_NOFOLLOW | O_LARGEFILE); +-#endif +- //fStream = fopen(szPath, "rb"); +- //if (!fStream) // error +- if (nFd == -1) +- { +- return (errno != ENOENT); +- } +- else // success +- { +-#ifdef HAVE_FSTAT64 +- nRes = fstat64(nFd, &fStat); +-#else +- nRes = fstat(nFd, &fStat); +-#endif +- +- if (nRes == -1) +- return true; // for large files +- //fclose(fStream); +- ::close(nFd); +- return (S_ISREG(fStat.st_mode)); +- } +-} +- +-//------------------------------------------------ +-int locateProgram(char *szResultPath, int nPathLen, char *szBin) +-{ +- long i; +- char *szLocations[] = {"/sbin", "/usr/sbin", "/usr/local/sbin", "/bin", "/usr/bin", "/usr/local/bin", ""}; +- char szTemp[2048]; +- +- for (i=0; *(szLocations[i]); i++) +- { +- snprintf(szTemp, sizeof(szTemp), "%s/%s", szLocations[i], szBin); +- //pi_printf ("--> pgm=%s/%s\n", szLocations[i], szBin); +- if (doesFileExists2(szTemp)) +- { +- snprintf(szResultPath, nPathLen, "%s/%s", szLocations[i], szBin); +- return 0; // okay +- } +- } +- +- return -1; // error +-} +-*/ +- +-//------------------------------------------------ +-int execProgram(char *szProgram, char *argv[], char *szOutput, int nMaxOutput) +-{ +- int nFd[2]; +- int nRes; +- pid_t pid; +- +- // init +- memset(szOutput, 0, nMaxOutput); +- if (pipe(nFd) < 0) +- return -1; +- +- pid = fork(); +- switch (pid) +- { +- case -1: // error +- perror ("fork() in execProgram"); +- return -1; +- +- case 0: // child +- dup2(nFd[1], STDOUT_FILENO); // stdout --> parent process +- dup2(nFd[1], STDERR_FILENO); // stdout --> parent process +- nRes = execve(szProgram, argv, NULL); +- exit(0); +- break; +- +- default: // parent +- read(nFd[0], szOutput, nMaxOutput); +- //pi_printf ("\n\n\n[[[[[[[%s]]]]]]]\n\n\n", szString); +- waitpid(pid, NULL, 0); +- sleep(1); +- break; +- }; +- +- return 0; +-} +- +-//------------------------------------------------ +-//---------------------- USAGE ------------------- +-//------------------------------------------------ +-/* +- nRes = locateProgram(szFullPath, sizeof(szFullPath), g_fs[nFs].szCmdMkfsName); +- if (nRes == -1) +- return CResult("Can't find program %s which is required
to format the partition.
" +- "Please, install %s.
You can search on http://www.freshmeat.net.", +- g_fs[nFs].szCmdMkfsName, g_fs[nFs].szFsTools); +- +- if (szLabel && *szLabel) // not empty +- snprintf (szFullLabel, sizeof(szFullLabel), "%s", szLabel); +- else +- snprintf (szFullLabel, sizeof(szFullLabel), "none"); +- +- argv[0] = g_fs[nFs].szCmdMkfsOpts; +- argv[1] = g_fs[nFs].szCmdMkfsLabelOpts; +- argv[2] = szFullLabel; +- argv[3] = g_fs[nFs].szCmdMkfsOpts; +- argv[4] = szDevice; +- argv[5] = NULL; +- +- // pi_printf debug +- pi_printf ("FORMATTING: path=[%s]\n", szFullPath); +- for (int j=0; j < 4; j++) +- pi_printf ("argv[%d]=%s\n", j, argv[j]); +- +- execProgram(szFullPath, argv, szOutput, sizeof(szOutput)); +-*/ +- +diff -urNad qtparted-0.4.5~/src/runprog.h qtparted-0.4.5/src/runprog.h +--- qtparted-0.4.5~/src/runprog.h 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/runprog.h 1970-01-01 00:00:00.000000000 +0000 +@@ -1,20 +0,0 @@ +-/*************************************************************************** +- runprog.h - description +- ------------------- +- begin : Wed Sep 4 19:21:54 UTC 2002 +- copyright : (C) 2002 by Francois Dupoux +- email : fdupoux@partimage.org +- ***************************************************************************/ +- +-/*************************************************************************** +- * * +- * This program is free software; you can redistribute it and/or modify * +- * it under the terms of the GNU General Public License as published by * +- * the Free Software Foundation; either version 2 of the License, or * +- * (at your option) any later version. * +- * * +- ***************************************************************************/ +- +-//int doesFileExists2(char *szPath); +-//int locateProgram(char *szResultPath, int nPathLen, char *szBin); +-int execProgram(char *szProgram, char *argv[], char *szOutput, int nMaxOutput); +diff -urNad qtparted-0.4.5~/src/statistics.cpp qtparted-0.4.5/src/statistics.cpp +--- qtparted-0.4.5~/src/statistics.cpp 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/statistics.cpp 2006-03-01 20:53:21.495252192 +0000 +@@ -1,16 +1,16 @@ + /*************************************************************************** +- statistics.cpp - description +- ------------------- +- begin : Wed Sep 4 19:21:54 UTC 2002 +- copyright : (C) 2002 by Francois Dupoux +- email : fdupoux@partimage.org ++ statistics.cpp - description ++ ------------------- ++ begin : Wed Sep 4 19:21:54 UTC 2002 ++ copyright : (C) 2002 by Francois Dupoux ++ email : fdupoux@partimage.org + ***************************************************************************/ + + /*************************************************************************** + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * +- * the Free Software Foundation; either version 2 of the License, or * ++ * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + ***************************************************************************/ +@@ -45,8 +45,8 @@ + a = getFsUsedKiloBytes(partinfo); + + /*printf ("device(%s)=%lu KB used\n", partinfo->partname().latin1(), a);*/ +- if (a == 0) return -1; +- else return a * KBYTE_SECTORS; ++ if (a == 0) return -1; ++ else return a * KBYTE_SECTORS; + } + + //------------------------------------------------ +@@ -54,117 +54,76 @@ + // security: if already mounted + umount(szMountPoint); + +- int nRes; +- +- char type[255]; +- +- if (((partinfo->fsspec->name().compare("fat32") == 0) +- || (partinfo->fsspec->name().compare("fat16") == 0))) { +- strcpy(type, "vfat"); +- } else { +- strcpy(type, partinfo->fsspec->name().latin1()); +- } +- nRes=mount(partinfo->partname().latin1(), +- szMountPoint, type, MS_NOATIME | MS_RDONLY, NULL); +- /*fprintf (stderr, "debug: try mount %s as %s --> %d\n", partinfo->partname().latin1(), +- type, nRes);*/ +- if (nRes == 0) // if success +- return 0; // success ++ char type[255]; + +- return -1; // failure ++ if (((partinfo->fsspec->name().compare("fat32") == 0) ++ || (partinfo->fsspec->name().compare("fat16") == 0))) { ++ strcpy(type, "vfat"); ++ } else { ++ strcpy(type, partinfo->fsspec->name().latin1()); ++ } ++ return mount(partinfo->partname().latin1(), ++ szMountPoint, type, MS_NOATIME | MS_RDONLY, NULL); + } + +-//------------------------------------------------ +-int isMounted(QP_PartInfo *partinfo, char *szMountPoint) { +- FILE *f; +- struct mntent *mnt; +- bool bMounted; +- char szBuf1 [MAXPATHLEN+1]; +- char szBuf2 [MAXPATHLEN+1]; +- +- // init +- bMounted = false; +- memset(szBuf1, 0, MAXPATHLEN); +- memset(szBuf2, 0, MAXPATHLEN); +- +- if ((f = setmntent (MOUNTED, "r")) == 0) +- return (-1); +- +- // loop: compare device with each mounted device +- while (((mnt = getmntent (f)) != 0) && (!bMounted)) { +- +- /*---try to see if the shortname match---*/ +- if ((partinfo->shortname().compare(mnt->mnt_fsname) == 0)) { +- bMounted = true; +- strcpy(szMountPoint, mnt->mnt_dir); +- } +- +- /*---if there is devfs try to see if the longname match---*/ +- if (isDevfsEnabled()) { +- if ((partinfo->longname().compare(mnt->mnt_fsname) == 0)) { +- bMounted = true; +- strcpy(szMountPoint, mnt->mnt_dir); +- } +- } +- } ++//--------------------------------------- ++QString mountPoint(QP_PartInfo *partinfo) { ++ FILE *f; ++ struct mntent *mnt; + +- endmntent (f); ++ if ((f = setmntent (MOUNTED, "r")) == 0) ++ return QString::null; + +- return bMounted; ++ // loop: compare device with each mounted device ++ while (((mnt = getmntent (f)) != 0)) { ++ if ((partinfo->shortname().compare(mnt->mnt_fsname) == 0) || (isDevfsEnabled() && (partinfo->longname().compare(mnt->mnt_fsname) == 0))) { ++ endmntent(f); ++ return mnt->mnt_dir; ++ } ++ } ++ endmntent(f); ++ return QString::null; + } + + //------------------------------------------------ + unsigned long getFsUsedKiloBytes(QP_PartInfo *partinfo) { +- struct statfs sfs; +- char szMountPoint[MAXPATHLEN+1]; +- unsigned long long a, b, c; +- int bMounted; +- int bToBeUnmounted; +- int nRes; +- unsigned long lResult = 0; // to be returned ++ struct statfs sfs; ++ unsigned long long a, b, c; ++ bool bToBeUnmounted; ++ unsigned long lResult = 0; // to be returned ++ QString mnt; + +- // init +- memset(szMountPoint, 0, MAXPATHLEN+1); +- bToBeUnmounted = false; ++ // init ++ bToBeUnmounted = false; + +- bMounted = isMounted(partinfo, szMountPoint); +- +- /*---if not mounted -> mount it---*/ +- if (!bMounted) { +- mkdir (TMP_MOUNTPOINT, 755); +- memset(szMountPoint, 0, sizeof(szMountPoint)-1); +- snprintf(szMountPoint, sizeof(szMountPoint)-1, "%s", TMP_MOUNTPOINT); +- nRes = my_mount(partinfo, TMP_MOUNTPOINT); +- /*if (nRes != 0) +- fprintf (stderr, "debug: cannot mount device %s\n", partinfo->partname().latin1());*/ +- bToBeUnmounted = (nRes == 0); +- bMounted =(nRes == 0); +- } ++ mnt = mountPoint(partinfo); ++ ++ /*---if not mounted -> mount it---*/ ++ if (mnt.isEmpty()) { ++ mkdir (TMP_MOUNTPOINT, 755); ++ int nRes = my_mount(partinfo, TMP_MOUNTPOINT); ++ if(nRes != 0) // Can't mount --> can't get statistics ++ return 0L; ++ bToBeUnmounted = (nRes == 0); ++ mnt = TMP_MOUNTPOINT; ++ } + +- // if the partition is mounted (naturally or not) +- if (bMounted) { +- if (statfs(szMountPoint, &sfs) != -1) { +- a = (sfs.f_blocks - sfs.f_bavail); // used blocks count +- b = a * sfs.f_bsize; // used bytes count +- c = b / 1024LL; // user KiloBytes count +- lResult = c; +- } /*else { +- fprintf (stderr, "debug: statfs error on device %s\n", partinfo->partname().latin1()); +- }*/ ++ if (statfs(mnt, &sfs) != -1) { ++ a = (sfs.f_blocks - sfs.f_bavail); // used blocks count ++ b = a * sfs.f_bsize; // used bytes count ++ c = b / 1024LL; // user KiloBytes count ++ lResult = c; ++ } + +- if (bToBeUnmounted) { +- nRes = umount(szMountPoint); +- if (nRes != 0) { +- QString label = QString(QObject::tr("Cannot umount partition device: %1." +- "Please do it by hand first to commit the changes!")) +- .arg(partinfo->partname()); +- QMessageBox::information(NULL, PROG_NAME, label); +- } +- } ++ if (bToBeUnmounted) { ++ int nRes = umount(mnt); ++ if (nRes != 0) { ++ QString label = QObject::tr("Cannot umount partition device: %1." ++ "Please do it by hand first to commit the changes!") ++ .arg(partinfo->partname()); ++ QMessageBox::information(NULL, PROG_NAME, label); ++ } ++ } + +- return lResult; // success +- } else { +- // error -> partition not mounted +- return 0L; // failure +- } ++ return lResult; // success + } +diff -urNad qtparted-0.4.5~/src/statistics.h qtparted-0.4.5/src/statistics.h +--- qtparted-0.4.5~/src/statistics.h 2006-03-01 20:45:18.000000000 +0000 ++++ qtparted-0.4.5/src/statistics.h 2006-03-01 20:53:21.496252040 +0000 +@@ -3,7 +3,9 @@ + ------------------- + begin : Wed Sep 4 19:21:54 UTC 2002 + copyright : (C) 2002 by Francois Dupoux ++ (C) 2005 by Bernhard Rosenkraenzer + email : fdupoux@partimage.org ++ bero@arklinux.org + ***************************************************************************/ + + /*************************************************************************** +@@ -17,7 +19,7 @@ + + #include "qp_libparted.h" + +-int isMounted(QP_PartInfo *, char *szMountPoint); ++QString mountPoint(QP_PartInfo *); + unsigned long getFsUsedKiloBytes(QP_PartInfo *); + int my_mount(QP_PartInfo *, char *szMountPoint); + PedSector space_stats(QP_PartInfo *); --- qtparted-0.4.5.orig/debian/patches/kubuntu_03_fix_desktop_file.dpatch +++ qtparted-0.4.5/debian/patches/kubuntu_03_fix_desktop_file.dpatch @@ -0,0 +1,42 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## kubuntu_04_libparted17.dpatch by Siegfried-Angel Gevatter Pujals (RainCT) +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Fix .desktop file, update it to the current standards and add translations + +@DPATCH@ +diff -urNad qtparted-0.4.5~/data/qtparted.desktop qtparted-0.4.5/data/qtparted.desktop +--- qtparted-0.4.5~/data/qtparted.desktop 2007-12-10 18:58:47.000000000 +0100 ++++ qtparted-0.4.5/data/qtparted.desktop 2007-12-10 19:09:38.000000000 +0100 +@@ -1,17 +1,20 @@ + [Desktop Entry] +-Exec=qtparted +-Name=QTParted +-Icon=qtparted +-Terminal=false ++Version=1.0 + Type=Application +-Comment=Application for partitioning a disk ++Name=QtParted + GenericName=Create, reorganize and remove partitions ++GenericName[ca]=Particionador de discs ++GenericName[es]=Herramienta de gestion de particiones + GenericName[fr]=Créer, réorganiser et effacer des partitions +-Comment[it]=Applicazione per il partizionamento di un disco +-Comment[fr]=Application pour partitionner un disque ++Comment=Application for partitioning a disk ++Comment[ca]=Particioneu els vostres discs ++Comment[de]=Programm zum Partitionieren einer Festplatte ++Comment[es]=Gestiona las particiones de tus discos + Comment[fi]=Kiintolevyn partitiointityökalu +-Encoding=UTF-8 +-Categories=Application;System;QT; ++Comment[fr]=Application pour partitionner un disque ++Comment[it]=Applicazione per il partizionamento di un disco ++Exec=qtparted-root ++Icon=qtparted ++Terminal=false ++Categories=System;Qt; + X-KDE-SubstituteUID=true +- +-Version=0.9.4 --- qtparted-0.4.5.orig/debian/patches/kubuntu_04_libparted17.dpatch +++ qtparted-0.4.5/debian/patches/kubuntu_04_libparted17.dpatch @@ -0,0 +1,20 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## kubuntu_04_libparted17.dpatch by Jonathan Riddell +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +@DPATCH@ +diff -urNad qtparted-0.4.5~/src/qp_fswrap.cpp qtparted-0.4.5/src/qp_fswrap.cpp +--- qtparted-0.4.5~/src/qp_fswrap.cpp 2006-08-31 10:03:02.000000000 +0000 ++++ qtparted-0.4.5/src/qp_fswrap.cpp 2006-08-31 10:03:09.000000000 +0000 +@@ -1002,7 +1002,7 @@ + /*---FAT32 WRAPPER---------------------------------------------------------------*/ + QString QP_FSFat32::_get_label(PedPartition *part) + { +- char buffer[PED_SECTOR_SIZE]; ++ char buffer[PED_SECTOR_SIZE_DEFAULT]; + char label[12]; + + if (!QP_FSWrap::read_sector(part, 0, 1, buffer)) + --- qtparted-0.4.5.orig/debian/patches/kubuntu_07_root_is_sudo.dpatch +++ qtparted-0.4.5/debian/patches/kubuntu_07_root_is_sudo.dpatch @@ -0,0 +1,64 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## kubuntu_07_root_is_sudo.dpatch by Siegfried-Angel Gevatter Pujals (RainCT) +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +@DPATCH@ +diff -urNad qtparted-0.4.5~/src/qp_drivelist.cpp qtparted-0.4.5/src/qp_drivelist.cpp +--- qtparted-0.4.5~/src/qp_drivelist.cpp 2003-08-27 18:13:20.000000000 +0200 ++++ qtparted-0.4.5/src/qp_drivelist.cpp 2007-12-10 20:46:11.000000000 +0100 +@@ -68,7 +68,7 @@ + //QStrList lstdrives = QP_LibParted::device_probe(); + if (devlist->devlist.count() == 0) { + QMessageBox::information(this, "QTParted", +- QString(tr("No device found. Maybe you're not using root user?"))); ++ QString(tr("No device found. Maybe you aren't running QtParted with sudo privilegies?"))); + } + + /*---make the group menu---*/ +diff -urNad qtparted-0.4.5~/ts/qtparted_ca.ts qtparted-0.4.5/ts/qtparted_ca.ts +--- qtparted-0.4.5~/ts/qtparted_ca.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_ca.ts 2007-12-10 20:51:00.000000000 +0100 +@@ -191,7 +191,7 @@ + QP_DriveList + + No device found. Maybe you're not using root user? +- No s'ha trobat cap dispositiu. ¿Pot ser que no estigui identificat com a root? ++ No s'ha trobat cap dispositiu. Pot ser que no estigueu executant el QtParted amb privilegis d'administració? + + + Device +@@ -575,7 +575,7 @@ + Partició activa actualment: %1 + Canvia la partició activa a: %2 + +-¿Està segur de que vol canviar la partició activa? ++Esteu segur de que vol canviar la partició activa? + + + &Format +diff -urNad qtparted-0.4.5~/ts/qtparted_es.ts qtparted-0.4.5/ts/qtparted_es.ts +--- qtparted-0.4.5~/ts/qtparted_es.ts 2007-12-10 18:36:34.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_es.ts 2007-12-10 20:50:37.000000000 +0100 +@@ -191,7 +191,7 @@ + QP_DriveList + + No device found. Maybe you're not using root user? +- No se ha encontrado ningún dispositivo. ¿Puede ser que no esté identificado como root? ++ No se ha encontrado ningún dispositivo. ¿Puede ser que haya ejecutado QtParted sin privilegios de administración? + + + Device +diff -urNad qtparted-0.4.5~/ts/qtparted_fi.ts qtparted-0.4.5/ts/qtparted_fi.ts +--- qtparted-0.4.5~/ts/qtparted_fi.ts 2005-02-04 14:40:52.000000000 +0100 ++++ qtparted-0.4.5/ts/qtparted_fi.ts 2007-12-10 20:46:44.000000000 +0100 +@@ -185,7 +185,7 @@ + + QP_DriveList + +- No device found. Maybe you're not using root user? ++ No device found. Maybe you aren't running QtParted with sudo privilegies? + Laitteita ei löytynyt. Sinulla ei ehkä ole pääkäyttäjän oikeuksia. + + --- qtparted-0.4.5.orig/debian/patches/kubuntu_02_installer_mode.dpatch +++ qtparted-0.4.5/debian/patches/kubuntu_02_installer_mode.dpatch @@ -0,0 +1,446 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## kubuntu_02_installer_mode.dpatch by Jonathan Riddell +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +@DPATCH@ +diff -urNad qtparted-0.4.5~/src/main.cpp qtparted-0.4.5/src/main.cpp +--- qtparted-0.4.5~/src/main.cpp 2006-05-15 18:37:49.000000000 +0300 ++++ qtparted-0.4.5/src/main.cpp 2006-05-15 18:37:50.000000000 +0300 +@@ -54,6 +54,7 @@ + << "Options used by qtparted:" << endl + << " -l, --log=value use 1 to enable log, 0 for disable it." << endl + << " [default = 1])" << endl ++ << " -i, --installer Kubuntu embedded installer mode" << endl + << " -h, --help Show this usage message" << endl + << endl << endl + << program_name << " by Zanac copyright 2003, (C) 2005 Ark Linux" << endl +@@ -78,6 +79,7 @@ + const char *program_name = argv[0]; + + int next_option; ++ bool installer_mode = false; + + /*---Flag log on/off, default 1 = on---*/ + int iLog = 1; +@@ -89,6 +91,7 @@ + const struct option long_options[] = { + { "help", 0, NULL, 'h' }, + { "log", 1, NULL, 'l' }, ++ { "installer",0, NULL, 'i' }, + { NULL, 0, NULL, 0 } // end of getopt array + }; + +@@ -118,6 +121,10 @@ + } + break; + ++ case 'i': ++ installer_mode = true; ++ break; ++ + case '?': // opzione invalida :( + print_usage(program_name); + +@@ -147,14 +154,19 @@ + + QP_Settings settings; + +- mainwindow = new QP_MainWindow(&settings, 0, "QP_MainWindow"); ++ mainwindow = new QP_MainWindow(installer_mode, &settings, 0, "QP_MainWindow"); + app.setMainWidget(mainwindow); ++ if (installer_mode) { ++ cout << mainwindow->winId() << endl; ++ } + + QSplashScreen *splash=new QSplashScreen(QPixmap(DATADIR "/pics/qtp_splash.png"), Qt::WType_Modal | Qt::WStyle_Customize | Qt::WStyle_NoBorder | Qt::WDestructiveClose); + splash->connect(mainwindow, SIGNAL(sigSplashInfo(const QString &)), + SLOT(message(const QString &))); + splash->finish(mainwindow); +- splash->show(); ++ if (!installer_mode) { ++ splash->show(); ++ } + + mainwindow->init(); + +diff -urNad qtparted-0.4.5~/src/qp_drivelist.cpp qtparted-0.4.5/src/qp_drivelist.cpp +--- qtparted-0.4.5~/src/qp_drivelist.cpp 2003-08-27 19:13:20.000000000 +0300 ++++ qtparted-0.4.5/src/qp_drivelist.cpp 2006-05-15 18:37:50.000000000 +0300 +@@ -142,6 +142,24 @@ + } + } + ++void QP_DriveList::slotListSelected2(const QString& name) { ++ /*---scan for every menu in the group---*/ ++ QP_Device *dev; ++ for (dev = (QP_Device *)devlist->devlist.first(); dev; dev = (QP_Device *)devlist->devlist.next()) { ++ /*---get the device node from devlist---*/ ++ QP_DeviceNode *p = (QP_DeviceNode *)dev->data(); ++ ++ /*---the name match, so select it!---*/ ++ if (p->action->text().compare(name) == 0) { ++ p->action->setOn(true); ++ ++ /*---and of course selecte the "selected device"---*/ ++ _selDevice = dev; ++ } ++ } ++ emit sigSelectDevice(_selDevice); ++} ++ + void QP_DriveList::slotActionSelected(QAction *action) { + /*---get the device name (ex. /dev/hda)---*/ + QString name = action->text(); +diff -urNad qtparted-0.4.5~/src/qp_drivelist.h qtparted-0.4.5/src/qp_drivelist.h +--- qtparted-0.4.5~/src/qp_drivelist.h 2003-08-27 19:13:18.000000000 +0300 ++++ qtparted-0.4.5/src/qp_drivelist.h 2006-05-15 18:37:50.000000000 +0300 +@@ -65,6 +65,7 @@ + + public slots: + void slotListSelected(QListViewItem *); ++ void slotListSelected2(const QString&); + void slotActionSelected(QAction *); + void slotPopUp(QListViewItem *, const QPoint &, int); + }; +diff -urNad qtparted-0.4.5~/src/qp_fswrap.cpp qtparted-0.4.5/src/qp_fswrap.cpp +--- qtparted-0.4.5~/src/qp_fswrap.cpp 2006-05-15 18:37:49.000000000 +0300 ++++ qtparted-0.4.5/src/qp_fswrap.cpp 2006-05-15 18:37:50.000000000 +0300 +@@ -38,6 +38,10 @@ + #include "qp_options.h" + #include "qp_debug.h" + ++#include ++#include ++using namespace std; ++ + #define NOTFOUND tr("command not found") + #define TMP_MOUNTPOINT "/tmp/mntqp" + +@@ -434,6 +438,7 @@ + } + + bool QP_FSNtfs::mkpartfs(QString dev, QString label) { ++ cout << "- FORMAT " << dev << " ntfs" << endl; + char szcmdline[200]; + QString cmdline; + +@@ -650,6 +655,7 @@ + } + + bool QP_FSJfs::mkpartfs(QString dev, QString label) { ++ cout << "- FORMAT " << dev << " jfs" << endl; + char szcmdline[200]; + QString cmdline; + +@@ -725,6 +731,7 @@ + } + + bool QP_FSExt3::mkpartfs(QString dev, QString label) { ++ cout << "- FORMAT " << dev << " ext3" << endl; + char szcmdline[200]; + QString cmdline; + +@@ -786,8 +793,10 @@ + } + } + ++ /* this doesn't always work, jriddell + rx = QRegExp("^Writing superblocks and filesystem accounting information: done"); + if (rx.search(line) == 0) ++ */ + success = true; + } + fs_close(); +@@ -837,6 +846,7 @@ + } + + bool QP_FSXfs::mkpartfs(QString dev, QString label) { ++ cout << "- FORMAT " << dev << " xfs" << endl; + char szcmdline[200]; + QString cmdline; + +diff -urNad qtparted-0.4.5~/src/qp_listview.cpp qtparted-0.4.5/src/qp_listview.cpp +--- qtparted-0.4.5~/src/qp_listview.cpp 2005-07-07 00:34:51.000000000 +0300 ++++ qtparted-0.4.5/src/qp_listview.cpp 2006-05-15 18:38:12.000000000 +0300 +@@ -25,6 +25,8 @@ + + #include + ++#include ++ + #define MIN_HDWIDTH 190 + + +diff -urNad qtparted-0.4.5~/src/qp_navview.cpp qtparted-0.4.5/src/qp_navview.cpp +--- qtparted-0.4.5~/src/qp_navview.cpp 2003-08-27 19:13:19.000000000 +0300 ++++ qtparted-0.4.5/src/qp_navview.cpp 2006-05-15 18:37:50.000000000 +0300 +@@ -75,6 +75,10 @@ + QP_NavView::~QP_NavView() { + } + ++void QP_NavView::slotListSelected(const QString& name) { ++ drivelist->slotListSelected2(name); ++} ++ + void QP_NavView::setPopup(QPopupMenu *popup) { + drivelist->setPopup(popup); + } +diff -urNad qtparted-0.4.5~/src/qp_navview.h qtparted-0.4.5/src/qp_navview.h +--- qtparted-0.4.5~/src/qp_navview.h 2003-08-27 19:13:18.000000000 +0300 ++++ qtparted-0.4.5/src/qp_navview.h 2006-05-15 18:37:50.000000000 +0300 +@@ -46,6 +46,9 @@ + QActionGroup *agDevices(); + QP_Device *selDevice(); /*---return the selected device---*/ + ++ void slotListSelected(const QString& name); ++ ++ + protected: + QP_DriveList *drivelist; + QLabel *details; +@@ -53,7 +56,7 @@ + signals: + void sigSelectDevice(QP_Device *); /*---emitted when user select a hard disk---*/ + +-protected slots: ++private slots: + void displayInfo(QP_Device *); + }; + +--- qtparted/src/qp_window.cpp 2006-05-26 19:43:27.424723128 +0000 ++++ qtparted/src/qp_window.cpp 2006-05-26 20:47:28.452798104 +0000 +@@ -31,6 +31,8 @@ + #include + #include + #include ++#include ++#include + #include "qp_common.h" + #include "qp_window.h" + #include "qp_filesystem.h" +@@ -52,10 +54,15 @@ + #include "../data/qtparted.xpm" + + ++#include ++#include ++using namespace std; + +-QP_MainWindow::QP_MainWindow(QP_Settings *qpsettings, QWidget *parent, const char *name):QMainWindow(parent, name) { ++QP_MainWindow::QP_MainWindow(bool _installer_mode, QP_Settings *qpsettings, QWidget *parent, const char *name):QMainWindow(parent, name) { + setCaption(QString("%1 v%2").arg(PACKAGE).arg(VERSION)); + ++ installer_mode = _installer_mode; ++ + /*---load the setting from disk---*/ + settings = qpsettings; + +@@ -63,6 +70,10 @@ + addToolBar(); + addMenuBar(); + addStatusBar(); ++ if (installer_mode) { ++ menuBar()->hide(); ++ statusBar()->hide(); ++ } + + /*---init "enabled" status on menuitem---*/ + InitMenu(); +@@ -136,11 +147,54 @@ + /*---connect the sigDiskChanged used for undo/commit---*/ + connect(diskview, SIGNAL(sigDiskChanged()), + this, SLOT(slotDiskChanged())); ++ ++ if (installer_mode) { ++ navview->hide(); ++ ++ stdinSocket = new QSocketNotifier(0, QSocketNotifier::Read); ++ connect( stdinSocket, SIGNAL(activated(int)), this, SLOT(slotReadStdin(int)) ); ++ ++ stdinSocketException = new QSocketNotifier(0, QSocketNotifier::Exception); ++ connect( stdinSocketException, SIGNAL(activated(int)), this, SLOT(slotStdinException(int)) ); ++ ++ setUsesTextLabel(true); ++ } + } + + QP_MainWindow::~QP_MainWindow() { + } + ++void QP_MainWindow::slotReadStdin(int) { ++ QFile stdinFile; ++ stdinFile.open(IO_ReadOnly, stdin); ++ ++ QString input; ++ stdinFile.readLine(input, 99999); ++ ++ if (input.contains("undo") > 0 && actUndo->isEnabled()) { ++ slotUndo(); ++ } ++ if (input.contains("apply") > 0 && actCommit->isEnabled()) { ++ if (slotCommit()) { ++ cout << "0 OK" << endl; ++ qApp->quit(); ++ } else { ++ cout << "1 Cancel" << endl; ++ } ++ } else if (input.contains("apply")) { ++ cout << "0 OK" << endl; ++ qApp->quit(); ++ } ++ if (input.contains("exit") > 0) { ++ qApp->quit(); ++ } ++ stdinFile.close(); ++} ++ ++void QP_MainWindow::slotStdinException(int) { ++ qApp->quit(); ++} ++ + void QP_MainWindow::init() { + emit sigSplashInfo(tr("Getting devices")); + navview->init(); +@@ -153,6 +207,13 @@ + loadSettings(); + + emit sigSplashInfo(tr("Ready")); ++ if (installer_mode) { ++ deviceDropdown->setCurrentItem(0); ++ if (deviceDropdown->currentText() != "") { ++ slotListSelected(deviceDropdown->currentText()); ++ } ++ cout << "STARTED" << endl; ++ } + } + + void QP_MainWindow::refreshDiskView() { +@@ -442,9 +503,11 @@ + + void QP_MainWindow::addToolBar() { + /*---Operations toolbar---*/ ++ if (!installer_mode) { + QToolBar *toolUndoCommit = new QToolBar(this, "toolUndoCommit"); + actUndo->addTo(toolUndoCommit); + actCommit->addTo(toolUndoCommit); ++ } + + /*---Operations toolbar---*/ + QToolBar *toolOperations = new QToolBar(this, "toolOperations"); +@@ -454,10 +517,40 @@ + actResize->addTo(toolOperations); + actMove->addTo(toolOperations); + actDelete->addTo(toolOperations); ++ if (installer_mode) { ++ actUndo->addTo(toolOperations); ++ actCommit->addTo(toolOperations); ++ } + + /*---What's this toolbar---*/ ++ if (!installer_mode) { + QToolBar *toolWhatThis = new QToolBar(this, "toolWhatThis"); + actWhatThis->addTo(toolWhatThis); ++ } ++ ++ if (installer_mode) { ++ deviceDropdown = new QComboBox(toolOperations, "deviceDropdown"); ++ QP_DevList devlist = QP_DevList(settings); ++ devlist.getDevices(); ++ QP_Device *p; ++ for (p = (QP_Device *)devlist.devlist.first(); ++ p; p = (QP_Device *)devlist.devlist.next()) { ++ ++ /*---get the device name---*/ ++ QString st = p->shortname(); ++ ++ /*---add to the listview---*/ ++ //QListViewItem *item = addDevice(st, ideRoot); ++ deviceDropdown->insertItem(QPixmap(tool_disk), st); ++ } ++ deviceDropdown->show(); ++ connect(deviceDropdown, SIGNAL(activated(const QString&)), ++ this, SLOT(slotListSelected(const QString&))); ++ } ++} ++ ++void QP_MainWindow::slotListSelected(const QString& name) { ++ navview->slotListSelected(name); + } + + void QP_MainWindow::buildDisksMenu() { +@@ -988,7 +1081,7 @@ + diskview->undo(); + } + +-void QP_MainWindow::slotCommit() { ++bool QP_MainWindow::slotCommit() { + QString label = QString(tr("Warning: You're committing all changes. You can lose data!\n" + "Make sure also that you're not commiting a busy device...\n" + "In other word PLEASE UMOUNT ALL PARTITIONS before commiting changes!")); +@@ -1002,9 +1095,9 @@ + + /*---yes, the user is sure :) ---*/ + if (mb.exec() == QMessageBox::No) { +- return; ++ return false; + } +- ++ + /*---show a progress dialog for long operation---*/ + InitProgressDialog(); + +@@ -1012,6 +1105,7 @@ + + /*---destroy the progress dialog---*/ + DoneProgressDialog(); ++ return true; + } + + void QP_MainWindow::slotDiskChanged() { +--- qtparted-0.4.5/src/qp_window.h 2006-05-26 19:47:58.873456648 +0000 ++++ qtparted-0.4.5/src/qp_window.h 2006-05-26 19:45:44.264920256 +0000 +@@ -34,6 +34,8 @@ + #include + #include + #include ++#include ++#include + + #include "qtparted.h" + #include "qp_libparted.h" +@@ -51,7 +53,7 @@ + class QP_MainWindow : public QMainWindow { + Q_OBJECT + public: +- QP_MainWindow(QP_Settings *, QWidget *parent, const char *name); ++ QP_MainWindow(bool _installer_mode, QP_Settings *, QWidget *parent, const char *name); + ~QP_MainWindow(); + void init(); /*---init the mainwindow ---*/ + void refreshDiskView(); +@@ -105,6 +107,11 @@ + QPopupMenu *mnuOperations; + int mnuSetActiveID; + int mnuSetHiddenID; ++ QSocketNotifier* stdinSocket; ++ QSocketNotifier* stdinSocketException; ++ bool installer_mode; ++ QComboBox* deviceDropdown; ++ QP_Device* _selDevice; + + protected slots: + void slotCreate(); +@@ -126,8 +133,11 @@ + void slotSetActive(); + void slotSetHidden(); + void slotUndo(); +- void slotCommit(); ++ bool slotCommit(); + void slotDiskChanged(); ++ void slotReadStdin(int); ++ void slotStdinException(int); ++ void slotListSelected(const QString& name); + + signals: + void sigSplashInfo(const QString &); --- qtparted-0.4.5.orig/debian/rules +++ qtparted-0.4.5/debian/rules @@ -0,0 +1,89 @@ +#!/usr/bin/make -f + +include /usr/share/dpatch/dpatch.make + +export build_dir=$(shell pwd)/debian/qtparted + +# These are used for cross-compiling and for saving the configure script +# from having to guess our platform (since we know it already) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) + +CXXFLAGS = -Wall + +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CXXFLAGS += -O0 +else + CXXFLAGS += -O2 +endif + +export CXXFLAGS + +configure: configure-stamp +configure-stamp: patch + dh_testdir + ./configure --prefix=/usr --with-qt-dir=/usr/share/qt3 \ + --enable-debug=full --disable-reiserfs + + touch configure-stamp + +build: build-stamp + +build-stamp: configure-stamp + dh_testdir + + # Add here commands to compile the package. + $(MAKE) + + touch build-stamp + +clean: unpatch + dh_testdir + dh_testroot + rm -f build-stamp configure-stamp + + [ ! -f Makefile ] || $(MAKE) distclean + # delete autoconf autogenerated stuff + #find . -type f -name Makefile.in -exec rm -f '{}' \; + #rm -f .autoconf_trace aclocal.m4 config.h.in configure qptypes.h + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + # Add here commands to install the package into debian/qtparted. + $(MAKE) install prefix=$(CURDIR)/debian/qtparted/usr + + # FIXME: Cleanup some mistakes by qtparted installation + rm -rf $(CURDIR)/debian/qtparted/usr/man + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_installdocs + dh_installexamples + dh_installmenu + dh_installman + dh_installinfo + dh_installchangelogs ChangeLog + dh_link + dh_strip + dh_compress + dh_fixperms + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install configure --- qtparted-0.4.5.orig/debian/changelog +++ qtparted-0.4.5/debian/changelog @@ -0,0 +1,200 @@ +qtparted (0.4.5-2ubuntu13) hardy; urgency=low + + * Bump standards version to 3.7.3: + - Move Homepage field to source stanza + * Add author information to existing patches + * debian/rules: do not ignore "make clean" errors + * patches/kubuntu_03_fix_desktop_file.dpatch: + - Update to match current FD.o standards + - Add Catalan, German and Spanish translations + * patches/kubuntu_05_german.dpatch: + - Fix mistakes in German translation, thanks to Christian A. Reiter + (LP: #123262) + * patches/kubuntu_06_english.dpatch: + - Fix mistakes in English translation, thanks to Graeme Hewson and + Shane (LP: #87375) + * kubuntu_07_root_is_sudo.dpatch: + - Avoid using the term "root" in the English, Catalan and Spanish + translations + * debian/qtparted-root: + - Add this script to start QtParted with sudo privilegies (LP: #92279) + * postrm: remove configuration files on purge (Closes: #359085) + + -- Siegfried-Angel Gevatter Pujals (RainCT) Mon, 10 Dec 2007 18:41:19 +0100 + +qtparted (0.4.5-2ubuntu12) feisty; urgency=low + + * debian/control: Update maintainer fields according to debian- + maintainer-field spec. + + -- Martin Pitt Fri, 9 Mar 2007 11:58:12 +0000 + +qtparted (0.4.5-2ubuntu11) edgy; urgency=low + + * Build against libparted 1.7 + * Add kubuntu_04_libparted17.dpatch + + -- Jonathan Riddell Thu, 31 Aug 2006 09:44:26 +0000 + +qtparted (0.4.5-2ubuntu10) edgy; urgency=low + + * Removed dependancy kdelibs-bin (merged into kdelibs4c2a) + + -- Sarah Hobbs Tue, 11 Jul 2006 00:44:52 +1000 + +qtparted (0.4.5-2ubuntu9) dapper; urgency=low + + * Update kubuntu_02_installer_mode.dpatch to output "1 Cancel" if + applying changes was cancelled, closes Malone #46404 + + -- Jonathan Riddell Fri, 26 May 2006 19:22:53 +0000 + +qtparted (0.4.5-2ubuntu8) dapper; urgency=low + + * Remove swapoff from kubuntu_02_installer_mode.dpatch + Ubiquity already turns off swap + + -- Jonathan Riddell Mon, 15 May 2006 18:38:23 +0300 + +qtparted (0.4.5-2ubuntu7) dapper; urgency=low + + * Edit kubuntu_02_installer_mode.dpatch + - Turn off swap on disks that are being edited + - Don't segfault if no disks are found + + -- Jonathan Riddell Sat, 13 May 2006 17:32:36 +0300 + +qtparted (0.4.5-2ubuntu6) dapper; urgency=low + + * Don't show splash screen in installer mode + + -- Jonathan Riddell Sat, 13 May 2006 00:18:07 +0300 + +qtparted (0.4.5-2ubuntu5) dapper; urgency=low + + * Modify kubuntu_02_installer_mode.dpatch output ok after + list of formatted partitions, same as gparted's patch + + -- Jonathan Riddell Fri, 12 May 2006 19:02:03 +0300 + +qtparted (0.4.5-2ubuntu4) dapper; urgency=low + + * Update kubuntu_02_installer_mode.dpatch, print out STARTED + when program is loaded so we know when to resize the window + and accept "exit" to quit on stdin. + + -- Jonathan Riddell Fri, 12 May 2006 18:08:22 +0300 + +qtparted (0.4.5-2ubuntu3) dapper; urgency=low + + * Update kubuntu_02_installer_mode.dpatch + - Tidy user interface by using a drop down box for disks, + hiding left hand side, selecting first disk by default, + tidy toolbars and show text under toolbar + - output partitions to be formatted as "- FORMAT /dev/hda2 ext3" + + -- Jonathan Riddell Thu, 4 May 2006 12:54:00 +0000 + +qtparted (0.4.5-2ubuntu2) dapper; urgency=low + + * Add kubuntu_03_fix_desktop_file.dpatch to fix desktop + file (using png icons and using kdesu) + * Add dep on kdelibs-bin + + -- Anthony Mercatante Wed, 30 Mar 2006 20:37:25 +0100 + +qtparted (0.4.5-2ubuntu1) dapper; urgency=low + + * Use dpatch + * Add kubuntu_01_branch_patch.dpatch with fixes from CVS + * Add kubuntu_02_installer_mode.dpatch + - Add --installer command line option + - output WinID on stdout + - accept apply and undo on stdin + - Hide status bar and menu bar + + -- Jonathan Riddell Wed, 1 Mar 2006 21:34:25 +0000 + +qtparted (0.4.5-1) unstable; urgency=low + + * New upstream release + + Closes: #296619, #290885: Keyboard shortcuts incorrectly shown + * Include the following changes from Ubuntu (by Loic Pefferkorn): + + desktop file: + - added GenericName and Version fields. + + debian/control: + - added homepage to description + * Regenerate Makefile.in files to use make instead of unsermake + (also inspired by the Ubuntu version but I moved this to the diff + instead doing it at build time) + * Update libtool files to Debian version to avoid unnecessary + dependencies + * Don't rename the Makefiles from .1 to .8 anymore. Not really worth the + effort + * Use AM_MAINTAINER_MODE in configure.ac + * Use debhelper compat level 5 and increase build-dependencies accordingly + * Don't test for /proc/ide/*/cache to find out wether something is a + harddisk or not. I don't know which specific parted bug upstream + tried to fix, but on my system it actually causes a bug... + + -- Frank Lichtenheld Thu, 24 Nov 2005 12:27:39 +0100 + +qtparted (0.4.4-5) unstable; urgency=low + + * Recompile for CXX transition + + -- Frank Lichtenheld Mon, 29 Aug 2005 02:10:17 +0200 + +qtparted (0.4.4-4) unstable; urgency=medium + + * Recompile with new libparted (Closes: #293945) + * No need to do a full sponsored upload for that, so + just add me to Uploaders for this one + + -- Frank Lichtenheld Tue, 8 Feb 2005 01:03:01 +0100 + +qtparted (0.4.4-3) unstable; urgency=high + + * Removed reiserfs support for now as it seems buggy in the progsreiserfs + implementation. (Closes: #265738, #272611) + * nparted was removed from the suggested packages (Closes: #270034) + * Bumped the copyright year visible in the program (Closes: #269785) + * Changed Depends: gksu to (gksu | kdelibs-data | sux), because menu will + hopefully support sux in the future. (Closes: #265300) + + -- Fabian Franz Tue, 21 Sep 2004 22:11:45 +0200 + +qtparted (0.4.4-2.2) unstable; urgency=high + + * Non-Maintainer Upload. + * Re-upload -2.1 with urgency=high to reach sarge. + + -- Steinar H. Gunderson Tue, 14 Sep 2004 01:26:00 +0200 + +qtparted (0.4.4-2.1) unstable; urgency=low + + * Non-Maintainer Upload. + * Change "ntfstools" Recommends: to "ntfsprogs", which is ntfstools' new + name. (Closes: #267624, #267710) + + -- Steinar H. Gunderson Tue, 14 Sep 2004 01:03:28 +0200 + +qtparted (0.4.4-2) unstable; urgency=low + + * Moved man pages to correct sections. + * Removed duplicate Recommends + * Changed gksu to su-to-root usage. + + -- Fabian Franz Sun, 2 May 2004 03:37:28 +0200 + +qtparted (0.4.4-1) unstable; urgency=low + + * New upstream release. + + -- Fabian Franz Sun, 2 May 2004 01:56:11 +0200 + +qtparted (0.4.3-1) unstable; urgency=low + + * Initial Release. (Closes: #201606) + + -- Fabian Franz Thu, 11 Mar 2004 20:52:30 +0100 --- qtparted-0.4.5.orig/debian/qtparted-root +++ qtparted-0.4.5/debian/qtparted-root @@ -0,0 +1,34 @@ +#! /bin/sh +# +# QtParted Launcher +# +# This little script will execute QtParted with administrator privilegies +# It will try to autodetect which application should be used to gain +# those, choosing between kdesu, kdesudo and gksudo. +# +# By Siegfried-A. Gevatter +# Licensed under the GNU General Public License, version 2 or later +# See '/usr/share/common-licenses/GPL' for more information. +# + +auth="" + +if [ -x /usr/bin/kdesudo ]; then + auth="/usr/bin/kdesudo" +elif [ -x /usr/bin/kdesu ]; then + auth="/usr/bin/kdesu" +fi + +if [ -z $auth ] || [ -n "`ps -A | grep gnome-panel`" ]; then + if [ -x /usr/bin/gksudo ]; then + auth="/usr/bin/gksudo" + elif [ -x /usr/bin/gksu ]; then + auth="/usr/bin/gksu" + fi +fi + +if [ -z $auth ]; then + echo "Warning: Couldn't find any way to obtain sudo privilegies." +fi + +$auth /usr/sbin/qtparted --- qtparted-0.4.5.orig/debian/menu +++ qtparted-0.4.5/debian/menu @@ -0,0 +1,5 @@ +?package(qtparted): needs="X11" section="Apps/System"\ + title="QTParted" \ + command="su-to-root -X -c qtparted" \ + longtitle="A tool for partitioning your hard drives." \ + icon="/usr/share/pixmaps/qtparted.xpm" --- qtparted-0.4.5.orig/debian/install +++ qtparted-0.4.5/debian/install @@ -0,0 +1 @@ +debian/qtparted-root usr/sbin/ --- qtparted-0.4.5.orig/debian/qtparted.manpages +++ qtparted-0.4.5/debian/qtparted.manpages @@ -0,0 +1,3 @@ +doc/qtparted.1 +doc/run_qtparted.1 + --- qtparted-0.4.5.orig/debian/postrm +++ qtparted-0.4.5/debian/postrm @@ -0,0 +1,11 @@ +#!/bin/sh + +set -e + +if [ "$1" = "purge" ]; then + rm -rf /var/log/qtparted-2???????-??h??m??s.log +fi + +#DEBHELPER# + +exit 0 --- qtparted-0.4.5.orig/debian/dirs +++ qtparted-0.4.5/debian/dirs @@ -0,0 +1,2 @@ +usr/bin +usr/sbin --- qtparted-0.4.5.orig/admin/libtool.m4.in +++ qtparted-0.4.5/admin/libtool.m4.in @@ -1,28 +1,13 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -## Copyright 1996, 1997, 1998, 1999, 2000, 2001 +## Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 ## Free Software Foundation, Inc. ## Originally by Gordon Matzigkeit , 1996 ## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## -## As a special exception to the GNU General Public License, if you -## distribute this file as part of a program that contains a -## configuration script generated by Autoconf, you may include it under -## the same distribution terms that you use for the rest of that program. +## This file is free software; the Free Software Foundation gives +## unlimited permission to copy and/or distribute it, with or without +## modifications, as long as this notice is preserved. -# serial 47 AC_PROG_LIBTOOL +# serial 47 Debian 1.5.20-2 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) @@ -82,7 +67,7 @@ LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' +LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Prevent multiple expansion @@ -132,7 +117,7 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' +Xsed='sed -e 1s/^X//' [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] # Same as above, but do not quote variable references. @@ -152,7 +137,7 @@ default_ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except M$VC, +# All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" @@ -200,6 +185,8 @@ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi +_LT_CC_BASENAME([$compiler]) + # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) @@ -245,6 +232,48 @@ ])# _LT_AC_SYS_COMPILER +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +AC_DEFUN([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +]) + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +AC_DEFUN([_LT_COMPILER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +AC_DEFUN([_LT_LINKER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_LINKER_BOILERPLATE + + # _LT_AC_SYS_LIBPATH_AIX # ---------------------- # Links a minimal program and checks the executable @@ -317,15 +346,15 @@ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break @@ -494,14 +523,13 @@ # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.o` in *32-bit*) - LINUX_64_MODE="32" case $host in x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; - ppc64-*linux*) + ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) @@ -513,7 +541,6 @@ esac ;; *64-bit*) - LINUX_64_MODE="64" case $host in x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" @@ -578,7 +605,7 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) @@ -588,8 +615,10 @@ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi @@ -615,11 +644,16 @@ LDFLAGS="$LDFLAGS $3" printf "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized + # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD + $echo "X$_lt_linker_boilerplate" | $Xsed > conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi else $2=yes fi @@ -643,7 +677,7 @@ AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 - testring="ABCD" + teststring="ABCD" case $build_os in msdosdjgpp*) @@ -672,20 +706,53 @@ lt_cv_sys_max_cmd_len=8192; ;; - *) + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + *) # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` - testring=$testring$testring + teststring=$teststring$teststring done - testring= + teststring= # Add a significant safety factor because C++ compilers can tack on massive # amounts of additional arguments before passing them to the linker. # It appears as though 1/2 is a usable value. @@ -781,7 +848,7 @@ }] EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; @@ -835,7 +902,7 @@ lt_cv_dlopen_self=yes ]) ;; - + *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], @@ -924,20 +991,13 @@ mkdir out printf "$lt_simple_compile_test_code" > conftest.$ac_ext - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) @@ -949,13 +1009,18 @@ then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp + $SED '/^$/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi - chmod u+w . - $rm conftest* out/* - rmdir out + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* @@ -1014,8 +1079,8 @@ [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_AC_TAGVAR(hardcode_action, $1)= if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ - test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then + test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existant directories. if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && @@ -1072,7 +1137,7 @@ *) AC_MSG_RESULT([no]) ;; - esac + esac fi ])# AC_LIBTOOL_SYS_LIB_STRIP @@ -1085,7 +1150,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext=".so" +shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -1095,7 +1160,20 @@ version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi need_lib_prefix=unknown hardcode_into_libs=no @@ -1160,7 +1238,7 @@ amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) @@ -1169,7 +1247,7 @@ shlibpath_var=LIBRARY_PATH ;; -bsdi4*) +bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -1185,7 +1263,7 @@ cygwin* | mingw* | pw32*) version_type=windows - shrext=".dll" + shrext_cmds=".dll" need_version=no need_lib_prefix=no @@ -1197,7 +1275,8 @@ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -1227,7 +1306,7 @@ ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac ;; @@ -1250,7 +1329,7 @@ soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -1273,7 +1352,7 @@ dynamic_linker=no ;; -freebsd*-gnu*) +kfreebsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -1285,8 +1364,17 @@ dynamic_linker='GNU ld.so' ;; -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -1304,7 +1392,7 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - freebsd3.[01]* | freebsdelf3.[01]*) + freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; @@ -1331,9 +1419,9 @@ version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) - shrext='.so' + shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH @@ -1348,7 +1436,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) - shrext='.sl' + shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH @@ -1359,7 +1447,7 @@ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) - shrext='.sl' + shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH @@ -1421,22 +1509,19 @@ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, @@ -1446,6 +1531,30 @@ dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + netbsd*) version_type=sunos need_lib_prefix=no @@ -1455,7 +1564,7 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi @@ -1484,7 +1593,11 @@ openbsd*) version_type=sunos need_lib_prefix=no - need_version=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH @@ -1504,7 +1617,7 @@ os2*) libname_spec='$name' - shrext=".dll" + shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' @@ -1650,7 +1763,9 @@ case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -1712,7 +1827,7 @@ # AC_LIBTOOL_WIN32_DLL # -------------------- -# declare package support for building win32 dll's +# declare package support for building win32 DLLs AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_WIN32_DLL @@ -1886,7 +2001,7 @@ if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then @@ -1996,7 +2111,7 @@ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. + # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; @@ -2141,7 +2257,7 @@ hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file - case "$host_cpu" in + case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so @@ -2158,42 +2274,21 @@ ;; irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux*) - case $host_cpu in - alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* ) - lt_cv_deplibs_check_method=pass_all ;; - # the debian people say, arm and glibc 2.3.1 works for them with pass_all - arm* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + lt_cv_deplibs_check_method=pass_all ;; -netbsd*) +netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else @@ -2212,19 +2307,14 @@ ;; openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; @@ -2234,7 +2324,6 @@ solaris*) lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) @@ -2342,13 +2431,13 @@ # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl convenience library and # LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. +# --enable-ltdl-convenience to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# it is assumed to be `libltdl'. LIBLTDL will be prefixed with +# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' +# (note the single quotes!). If your package is not flat and you're not +# using automake, define top_builddir and top_srcdir appropriately in +# the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in @@ -2367,13 +2456,13 @@ # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl installable library and # LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided and an installed libltdl is not found, it is -# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' -# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single -# quotes!). If your package is not flat and you're not using automake, -# define top_builddir and top_srcdir appropriately in the Makefiles. +# --enable-ltdl-install to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# and an installed libltdl is not found, it is assumed to be `libltdl'. +# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and top_srcdir +# appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl @@ -2411,10 +2500,21 @@ # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2487,6 +2587,10 @@ _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # # Check for any special shared library compilation flags. # @@ -2500,7 +2604,7 @@ fi if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : + if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : else AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no @@ -2541,7 +2645,7 @@ # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -2550,48 +2654,11 @@ fi ;; -aix4*) +aix4* | aix5*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi - ;; - darwin* | rhapsody*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; - esac - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; + ;; esac AC_MSG_RESULT([$enable_shared]) @@ -2616,7 +2683,7 @@ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -2645,7 +2712,7 @@ _LT_AC_TAGVAR(compiler_lib_search_path, $1)= # Source file extension for C++ test sources. -ac_ext=cc +ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o @@ -2660,6 +2727,10 @@ # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD @@ -2681,7 +2752,7 @@ CC=${CXX-"c++"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +_LT_CC_BASENAME([$compiler]) # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately @@ -2699,8 +2770,8 @@ # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' @@ -2726,7 +2797,7 @@ # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists @@ -2756,8 +2827,22 @@ exp_sym_flag='-Bexport' no_entry_flag="" else - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + esac + exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi @@ -2774,7 +2859,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) + case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -2795,6 +2880,9 @@ fi esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -2803,15 +2891,16 @@ shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' + shared_flag='${wl}-G' else - shared_flag='-qmkshrobj' + shared_flag='${wl}-bM:SRE' fi fi fi - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. @@ -2820,13 +2909,12 @@ _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX @@ -2840,8 +2928,8 @@ # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -2854,16 +2942,17 @@ esac ;; + cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -2872,70 +2961,81 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - darwin* | rhapsody*) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac fi - ;; - esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; + ;; dgux*) case $cc_basename in - ec++) + ec++*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - ghcx) + ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -2946,14 +3046,14 @@ ;; esac ;; - freebsd[12]*) + freebsd[[12]]*) # C++ shared libraries reported to be fairly broken before switch to ELF _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; - freebsd*) + freebsd* | kfreebsd*-gnu | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_AC_TAGVAR(ld_shlibs, $1)=yes @@ -2970,12 +3070,12 @@ # location of the library. case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - aCC) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + aCC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -2984,11 +3084,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -2998,7 +3098,7 @@ ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' @@ -3014,7 +3114,7 @@ ;; esac fi - case "$host_cpu" in + case $host_cpu in hppa*64*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -3035,17 +3135,17 @@ esac case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - aCC) - case "$host_cpu" in + aCC*) + case $host_cpu in hppa*64*|ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists @@ -3061,12 +3161,12 @@ *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then - case "$host_cpu" in + case $host_cpu in ia64*|hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -3079,9 +3179,9 @@ ;; irix5* | irix6*) case $cc_basename in - CC) + CC*) # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -3092,9 +3192,9 @@ *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi fi _LT_AC_TAGVAR(link_all_deplibs, $1)=yes @@ -3105,14 +3205,14 @@ ;; linux*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -3130,20 +3230,44 @@ # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - icpc) + icpc*) # Intel C++ with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; - cxx) + pgCC*) + # Portland Group C++ compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -3171,7 +3295,7 @@ ;; mvs*) case $cc_basename in - cxx) + cxx*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; @@ -3181,7 +3305,7 @@ ;; esac ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= @@ -3192,15 +3316,31 @@ # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; + openbsd2*) + # C++ shared libraries are fairly broken + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; osf3*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -3210,14 +3350,14 @@ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - RCC) + RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - cxx) + cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -3235,7 +3375,7 @@ *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -3254,13 +3394,13 @@ ;; osf4* | osf5*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -3269,17 +3409,17 @@ # the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - RCC) + RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - cxx) + cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ $rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -3298,7 +3438,7 @@ *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -3322,7 +3462,7 @@ sco*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; @@ -3334,12 +3474,12 @@ ;; sunos4*) case $cc_basename in - CC) + CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - lcc) + lcc*) # Lucid # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -3352,36 +3492,33 @@ ;; solaris*) case $cc_basename in - CC) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The C++ compiler is used as linker so we must use $wl # flag to pass the commands to the underlying system - # linker. + # linker. We must also pass each convience library through + # to the system linker between allextract/defaultextract. + # The C++ compiler will combine linker options so we + # cannot just pass the convience library names through + # without $wl. # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -3389,9 +3526,9 @@ # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; - gcx) + gcx*) # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' @@ -3401,9 +3538,9 @@ if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | grep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -3412,9 +3549,9 @@ else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -3432,7 +3569,7 @@ ;; tandem*) case $cc_basename in - NCC) + NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -3542,7 +3679,7 @@ # The `*' in the case matches for architectures that use `case' in # $output_verbose_cmd can trigger glob expansion during the loop # eval without this substitution. - output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" + output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` for p in `eval $output_verbose_link_cmd`; do case $p in @@ -3582,7 +3719,7 @@ fi ;; - *.$objext|*.$libext) + *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then @@ -3618,6 +3755,21 @@ $rm -f confest.$objext +# PORTME: override above test on systems where it is broken +ifelse([$1],[CXX], +[case $host_os in +solaris*) + case $cc_basename in + CC*) + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun' + ;; + esac +esac +]) + case " $_LT_AC_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac @@ -3668,12 +3820,16 @@ # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${F77-"f77"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +_LT_CC_BASENAME([$compiler]) AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) @@ -3683,7 +3839,7 @@ # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -3691,8 +3847,10 @@ postinstall_cmds='$RANLIB $lib' fi ;; -aix4*) - test "$enable_shared" = yes && enable_static=no +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi ;; esac AC_MSG_RESULT([$enable_shared]) @@ -3743,20 +3901,27 @@ lt_simple_compile_test_code="class foo {}\n" # Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${GCJ-"gcj"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds + ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly @@ -3803,11 +3968,16 @@ # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${RC-"windres"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes AC_LIBTOOL_CONFIG($1) @@ -3833,11 +4003,12 @@ # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST - fi + fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ @@ -3887,7 +4058,7 @@ _LT_AC_TAGVAR(archive_cmds, $1) | \ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ _LT_AC_TAGVAR(module_cmds, $1) | \ - _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ @@ -3942,7 +4113,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -3953,11 +4124,11 @@ SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e s/^X//" +Xsed="$SED -e 1s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= @@ -3988,6 +4159,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -4018,7 +4195,7 @@ NM=$lt_NM # A symbol stripping program -STRIP=$STRIP +STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD @@ -4049,7 +4226,7 @@ libext="$libext" # Shared library suffix (normally ".so"). -shrext='$shrext' +shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" @@ -4064,7 +4241,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -4293,7 +4470,10 @@ # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. - test -f Makefile && make "$ltmain" + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi fi ])# AC_LIBTOOL_CONFIG @@ -4335,9 +4515,6 @@ # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" @@ -4359,6 +4536,13 @@ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; @@ -4366,7 +4550,7 @@ symcode='[[BCDEGQRST]]' ;; solaris* | sysv5*) - symcode='[[BDT]]' + symcode='[[BDRT]]' ;; sysv4) symcode='[[DFNSTU]]' @@ -4384,14 +4568,17 @@ # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) - symcode='[[ABCDGISTW]]' ;; + symcode='[[ABCDGIRSTW]]' ;; esac # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no @@ -4555,7 +4742,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) ;; *) @@ -4580,18 +4767,28 @@ ;; chorus*) case $cc_basename in - cxch68) + cxch68*) # Green Hills C++ Compiler # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; dgux*) case $cc_basename in - ec++) + ec++*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; - ghcx) + ghcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; @@ -4599,22 +4796,22 @@ ;; esac ;; - freebsd*) + freebsd* | kfreebsd*-gnu | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in - CC) + CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; - aCC) + aCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -4629,7 +4826,7 @@ ;; irix5* | irix6* | nonstopux*) case $cc_basename in - CC) + CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. @@ -4640,18 +4837,24 @@ ;; linux*) case $cc_basename in - KCC) + KCC*) # KAI C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; - icpc) + icpc* | ecpc*) # Intel C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - cxx) + ;; + pgCC*) + # Portland Group C++ compiler. + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. @@ -4668,25 +4871,25 @@ ;; mvs*) case $cc_basename in - cxx) + cxx*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) ;; osf3* | osf4* | osf5*) case $cc_basename in - KCC) + KCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; - RCC) + RCC*) # Rational C++ 2.4.1 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; - cxx) + cxx*) # Digital/Compaq C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha @@ -4702,7 +4905,7 @@ ;; sco*) case $cc_basename in - CC) + CC*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; *) @@ -4711,13 +4914,13 @@ ;; solaris*) case $cc_basename in - CC) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; - gcx) + gcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; @@ -4727,12 +4930,12 @@ ;; sunos4*) case $cc_basename in - CC) + CC*) # Sun C++ 4.x _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; - lcc) + lcc*) # Lucid _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; @@ -4742,7 +4945,7 @@ ;; tandem*) case $cc_basename in - NCC) + NCC*) # NonStop-UX NCC 3.20 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; @@ -4813,7 +5016,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -4839,6 +5042,16 @@ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being @@ -4850,7 +5063,7 @@ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -4874,12 +5087,19 @@ ;; linux*) - case $CC in + case $cc_basename in icc* | ecc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; ccc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. @@ -4900,9 +5120,14 @@ ;; solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac ;; sunos4*) @@ -4924,6 +5149,11 @@ fi ;; + unicos*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + uts4*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' @@ -4951,7 +5181,7 @@ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= @@ -4984,7 +5214,10 @@ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + linux*) + _LT_AC_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' @@ -5010,7 +5243,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= - _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* @@ -5027,7 +5260,8 @@ # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= - + # Just being paranoid about ensuring that cc_basename is set. + _LT_CC_BASENAME([$compiler]) case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time @@ -5047,6 +5281,27 @@ # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) @@ -5084,7 +5339,7 @@ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi @@ -5094,13 +5349,13 @@ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -5109,19 +5364,51 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=no else - ld_shlibs=no + _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -5139,8 +5426,8 @@ EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi @@ -5155,24 +5442,19 @@ *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) @@ -5206,9 +5488,20 @@ else _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi @@ -5225,7 +5518,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) + case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -5246,6 +5539,9 @@ fi esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -5254,29 +5550,29 @@ shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' + shared_flag='${wl}-G' else - shared_flag='-qmkshrobj' + shared_flag='${wl}-bM:SRE' fi fi fi - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX @@ -5290,8 +5586,8 @@ # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -5304,7 +5600,7 @@ _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - bsdi4*) + bsdi[[45]]*) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; @@ -5314,69 +5610,69 @@ # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext=".dll" + shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) - if test "$GXX" = yes ; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi ;; dgux*) @@ -5409,8 +5705,8 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $compiler_flags $libobjs $deplibs' + freebsd* | kfreebsd*-gnu | dragonfly*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -5418,7 +5714,7 @@ hpux9*) if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi @@ -5434,16 +5730,16 @@ hpux10* | hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ;; @@ -5453,7 +5749,7 @@ esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' @@ -5486,7 +5782,7 @@ irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' @@ -5496,7 +5792,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -5519,7 +5815,8 @@ _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else @@ -5529,7 +5826,7 @@ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac @@ -5540,14 +5837,14 @@ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def' + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' @@ -5559,13 +5856,13 @@ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -5584,10 +5881,12 @@ solaris*) _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + wlarc='${wl}' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp' + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else + wlarc='' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' @@ -5596,8 +5895,18 @@ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + *) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; @@ -5606,7 +5915,7 @@ if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -5666,9 +5975,9 @@ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -5726,7 +6035,7 @@ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) $rm conftest* printf "$lt_simple_compile_test_code" > conftest.$ac_ext - + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest @@ -5860,7 +6169,7 @@ # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && break + test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in --- qtparted-0.4.5.orig/config.sub +++ qtparted-0.4.5/config.sub @@ -3,7 +3,7 @@ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. -timestamp='2005-05-12' +timestamp='2005-07-08' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -248,6 +248,7 @@ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ @@ -256,13 +257,14 @@ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ + | ms1 \ | msp430 \ | ns16k | ns32k \ - | openrisc | or32 \ + | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ - | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b \ @@ -274,6 +276,9 @@ | z8k) basic_machine=$basic_machine-unknown ;; + m32c) + basic_machine=$basic_machine-unknown + ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown @@ -322,6 +327,7 @@ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ @@ -330,6 +336,7 @@ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ + | ms1-* \ | msp430-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ @@ -337,7 +344,7 @@ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ | sparclite-* \ @@ -352,6 +359,8 @@ | ymp-* \ | z8k-*) ;; + m32c-*) + ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) @@ -762,9 +771,8 @@ basic_machine=hppa1.1-oki os=-proelf ;; - or32 | or32-*) + openrisc | openrisc-*) basic_machine=or32-unknown - os=-coff ;; os400) basic_machine=powerpc-ibm @@ -801,7 +809,7 @@ pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; - pentiumii | pentium2 | pentiumiii | pentium3 | pentiumiv | pentium4) + pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) @@ -813,7 +821,7 @@ pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-* | pentiumiv-* | pentium4-*) + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) @@ -1090,12 +1098,9 @@ we32k) basic_machine=we32k-att ;; - sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) + sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; - sh64) - basic_machine=sh64-unknown - ;; sparc | sparcv8 | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; @@ -1182,7 +1187,8 @@ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* | -skyos*) + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1200,7 +1206,7 @@ os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) @@ -1389,6 +1395,9 @@ *-be) os=-beos ;; + *-haiku) + os=-haiku + ;; *-ibm) os=-aix ;; --- qtparted-0.4.5.orig/aclocal.m4 +++ qtparted-0.4.5/aclocal.m4 @@ -1,42 +1,12319 @@ -# generated automatically by aclocal 1.9.6 -*- Autoconf -*- +# generated automatically by aclocal 1.7.9 -*- Autoconf -*- -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005 Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) +dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +dnl Boston, MA 02111-1307, USA. + +dnl IMPORTANT NOTE: +dnl Please do not modify this file unless you expect your modifications to be +dnl carried into every other module in the repository. +dnl +dnl Single-module modifications are best placed in configure.in for kdelibs +dnl and kdebase or configure.in.in if present. + +# KDE_PATH_X_DIRECT +dnl Internal subroutine of AC_PATH_X. +dnl Set ac_x_includes and/or ac_x_libraries. +AC_DEFUN([KDE_PATH_X_DIRECT], +[ +AC_REQUIRE([KDE_CHECK_LIB64]) + +if test "$ac_x_includes" = NO; then + # Guess where to find include files, by looking for this one X11 .h file. + test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h + + # First, try using that file with no special directory specified. +AC_TRY_CPP([#include <$x_direct_test_include>], +[# We can compile using X headers with no special include directory. +ac_x_includes=], +[# Look for the header file in a standard set of common directories. +# Check X11 before X11Rn because it is often a symlink to the current release. + for ac_dir in \ + /usr/X11/include \ + /usr/X11R6/include \ + /usr/X11R5/include \ + /usr/X11R4/include \ + \ + /usr/include/X11 \ + /usr/include/X11R6 \ + /usr/include/X11R5 \ + /usr/include/X11R4 \ + \ + /usr/local/X11/include \ + /usr/local/X11R6/include \ + /usr/local/X11R5/include \ + /usr/local/X11R4/include \ + \ + /usr/local/include/X11 \ + /usr/local/include/X11R6 \ + /usr/local/include/X11R5 \ + /usr/local/include/X11R4 \ + \ + /usr/X386/include \ + /usr/x386/include \ + /usr/XFree86/include/X11 \ + \ + /usr/include \ + /usr/local/include \ + /usr/unsupported/include \ + /usr/athena/include \ + /usr/local/x11r5/include \ + /usr/lpp/Xamples/include \ + \ + /usr/openwin/include \ + /usr/openwin/share/include \ + ; \ + do + if test -r "$ac_dir/$x_direct_test_include"; then + ac_x_includes=$ac_dir + break + fi + done]) +fi # $ac_x_includes = NO + +if test "$ac_x_libraries" = NO; then + # Check for the libraries. + + test -z "$x_direct_test_library" && x_direct_test_library=Xt + test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc + + # See if we find them without any special options. + # Don't add to $LIBS permanently. + ac_save_LIBS="$LIBS" + LIBS="-l$x_direct_test_library $LIBS" +AC_TRY_LINK([#include ], [${x_direct_test_function}(1)], +[LIBS="$ac_save_LIBS" +# We can link X programs with no special library path. +ac_x_libraries=], +[LIBS="$ac_save_LIBS" +# First see if replacing the include by lib works. +# Check X11 before X11Rn because it is often a symlink to the current release. +for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${kdelibsuff}/` \ + /usr/X11/lib${kdelibsuff} \ + /usr/X11R6/lib${kdelibsuff} \ + /usr/X11R5/lib${kdelibsuff} \ + /usr/X11R4/lib${kdelibsuff} \ + \ + /usr/lib${kdelibsuff}/X11 \ + /usr/lib${kdelibsuff}/X11R6 \ + /usr/lib${kdelibsuff}/X11R5 \ + /usr/lib${kdelibsuff}/X11R4 \ + \ + /usr/local/X11/lib${kdelibsuff} \ + /usr/local/X11R6/lib${kdelibsuff} \ + /usr/local/X11R5/lib${kdelibsuff} \ + /usr/local/X11R4/lib${kdelibsuff} \ + \ + /usr/local/lib${kdelibsuff}/X11 \ + /usr/local/lib${kdelibsuff}/X11R6 \ + /usr/local/lib${kdelibsuff}/X11R5 \ + /usr/local/lib${kdelibsuff}/X11R4 \ + \ + /usr/X386/lib${kdelibsuff} \ + /usr/x386/lib${kdelibsuff} \ + /usr/XFree86/lib${kdelibsuff}/X11 \ + \ + /usr/lib${kdelibsuff} \ + /usr/local/lib${kdelibsuff} \ + /usr/unsupported/lib${kdelibsuff} \ + /usr/athena/lib${kdelibsuff} \ + /usr/local/x11r5/lib${kdelibsuff} \ + /usr/lpp/Xamples/lib${kdelibsuff} \ + /lib/usr/lib${kdelibsuff}/X11 \ + \ + /usr/openwin/lib${kdelibsuff} \ + /usr/openwin/share/lib${kdelibsuff} \ + ; \ +do +dnl Don't even attempt the hair of trying to link an X program! + for ac_extension in a so sl; do + if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then + ac_x_libraries=$ac_dir + break 2 + fi + done +done]) +fi # $ac_x_libraries = NO +]) + + +dnl ------------------------------------------------------------------------ +dnl Find a file (or one of more files in a list of dirs) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_FIND_FILE], +[ +$3=NO +for i in $2; +do + for j in $1; + do + echo "configure: __oline__: $i/$j" >&AC_FD_CC + if test -r "$i/$j"; then + echo "taking that" >&AC_FD_CC + $3=$i + break 2 + fi + done +done +]) + +dnl KDE_FIND_PATH(program-name, variable-name, list-of-dirs, +dnl if-not-found, test-parameter, prepend-path) +dnl +dnl Look for program-name in list-of-dirs+$PATH. +dnl If prepend-path is set, look in $PATH+list-of-dirs instead. +dnl If found, $variable-name is set. If not, if-not-found is evaluated. +dnl test-parameter: if set, the program is executed with this arg, +dnl and only a successful exit code is required. +AC_DEFUN([KDE_FIND_PATH], +[ + AC_MSG_CHECKING([for $1]) + if test -n "$$2"; then + kde_cv_path="$$2"; + else + kde_cache=`echo $1 | sed 'y%./+-%__p_%'` + + AC_CACHE_VAL(kde_cv_path_$kde_cache, + [ + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + dirs="" + for dir in $PATH; do + dirs="$dirs $dir" + done + if test -z "$6"; then dnl Append dirs in PATH (default) + dirs="$3 $dirs" + else dnl Prepend dirs in PATH (if 6th arg is set) + dirs="$dirs $3" + fi + IFS=$kde_save_IFS + + for dir in $dirs; do + if test -x "$dir/$1"; then + if test -n "$5" + then + evalstr="$dir/$1 $5 2>&1 " + if eval $evalstr; then + kde_cv_path="$dir/$1" + break + fi + else + kde_cv_path="$dir/$1" + break + fi + fi + done + + eval "kde_cv_path_$kde_cache=$kde_cv_path" + + ]) + + eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" + + fi + + if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then + AC_MSG_RESULT(not found) + $4 + else + AC_MSG_RESULT($kde_cv_path) + $2=$kde_cv_path + + fi +]) + +AC_DEFUN([KDE_MOC_ERROR_MESSAGE], +[ + AC_MSG_ERROR([No Qt meta object compiler (moc) found! +Please check whether you installed Qt correctly. +You need to have a running moc binary. +configure tried to run $ac_cv_path_moc and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable MOC to the right one before running +configure. +]) +]) + +AC_DEFUN([KDE_UIC_ERROR_MESSAGE], +[ + AC_MSG_WARN([No Qt ui compiler (uic) found! +Please check whether you installed Qt correctly. +You need to have a running uic binary. +configure tried to run $ac_cv_path_uic and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable UIC to the right one before running +configure. +]) +]) + + +AC_DEFUN([KDE_CHECK_UIC_FLAG], +[ + AC_MSG_CHECKING([whether uic supports -$1 ]) + kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` + AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, + [ + cat >conftest.ui < +EOT + ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" + if AC_TRY_EVAL(ac_uic_testrun); then + eval "kde_cv_prog_uic_$kde_cache=yes" + else + eval "kde_cv_prog_uic_$kde_cache=no" + fi + rm -f conftest* + ]) + + if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then + AC_MSG_RESULT([yes]) + : + $3 + else + AC_MSG_RESULT([no]) + : + $4 + fi +]) + + +dnl ------------------------------------------------------------------------ +dnl Find the meta object compiler and the ui compiler in the PATH, +dnl in $QTDIR/bin, and some more usual places +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_MOC_UIC], +[ + AC_REQUIRE([KDE_CHECK_PERL]) + qt_bindirs="" + for dir in $kde_qt_dirs; do + qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" + done + qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" + if test ! "$ac_qt_bindir" = "NO"; then + qt_bindirs="$ac_qt_bindir $qt_bindirs" + fi + + KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) + if test -z "$UIC_NOT_NEEDED"; then + KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) + if test -z "$UIC_PATH" ; then + KDE_UIC_ERROR_MESSAGE + exit 1 + else + UIC=$UIC_PATH + + if test $kde_qtver = 3; then + KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) + KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) + + if test x$ac_uic_supports_libpath = xyes; then + UIC="$UIC -L \$(kde_widgetdir)" + fi + if test x$ac_uic_supports_nounload = xyes; then + UIC="$UIC -nounload" + fi + fi + fi + else + UIC="echo uic not available: " + fi + + AC_SUBST(MOC) + AC_SUBST(UIC) + + UIC_TR="i18n" + if test $kde_qtver = 3; then + UIC_TR="tr2i18n" + fi + + AC_SUBST(UIC_TR) +]) + +AC_DEFUN([KDE_1_CHECK_PATHS], +[ + KDE_1_CHECK_PATH_HEADERS + + KDE_TEST_RPATH= + + if test -n "$USE_RPATH"; then + + if test -n "$kde_libraries"; then + KDE_TEST_RPATH="-R $kde_libraries" + fi + + if test -n "$qt_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" + fi + + if test -n "$x_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" + fi + + KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" + fi + +AC_MSG_CHECKING([for KDE libraries installed]) +ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + AC_MSG_RESULT(yes) +else + AC_MSG_ERROR([your system fails at linking a small KDE application! +Check, if your compiler is installed correctly and if you have used the +same compiler to compile Qt and kdelibs as you did use now. +For more details about this problem, look at the end of config.log.]) +fi + +if eval `KDEDIR= ./conftest 2>&5`; then + kde_result=done +else + kde_result=problems +fi + +KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log +kde_have_all_paths=yes + +KDE_SET_PATHS($kde_result) + +]) + +AC_DEFUN([KDE_SET_PATHS], +[ + kde_cv_all_paths="kde_have_all_paths=\"yes\" \ + kde_htmldir=\"$kde_htmldir\" \ + kde_appsdir=\"$kde_appsdir\" \ + kde_icondir=\"$kde_icondir\" \ + kde_sounddir=\"$kde_sounddir\" \ + kde_datadir=\"$kde_datadir\" \ + kde_locale=\"$kde_locale\" \ + kde_cgidir=\"$kde_cgidir\" \ + kde_confdir=\"$kde_confdir\" \ + kde_kcfgdir=\"$kde_kcfgdir\" \ + kde_mimedir=\"$kde_mimedir\" \ + kde_toolbardir=\"$kde_toolbardir\" \ + kde_wallpaperdir=\"$kde_wallpaperdir\" \ + kde_templatesdir=\"$kde_templatesdir\" \ + kde_bindir=\"$kde_bindir\" \ + kde_servicesdir=\"$kde_servicesdir\" \ + kde_servicetypesdir=\"$kde_servicetypesdir\" \ + kde_moduledir=\"$kde_moduledir\" \ + kde_styledir=\"$kde_styledir\" \ + kde_widgetdir=\"$kde_widgetdir\" \ + xdg_appsdir=\"$xdg_appsdir\" \ + xdg_menudir=\"$xdg_menudir\" \ + xdg_directorydir=\"$xdg_directorydir\" \ + kde_result=$1" +]) + +AC_DEFUN([KDE_SET_DEFAULT_PATHS], +[ +if test "$1" = "default"; then + + if test -z "$kde_htmldir"; then + kde_htmldir='\${datadir}/doc/HTML' + fi + if test -z "$kde_appsdir"; then + kde_appsdir='\${datadir}/applnk' + fi + if test -z "$kde_icondir"; then + kde_icondir='\${datadir}/icons' + fi + if test -z "$kde_sounddir"; then + kde_sounddir='\${datadir}/sounds' + fi + if test -z "$kde_datadir"; then + kde_datadir='\${datadir}/apps' + fi + if test -z "$kde_locale"; then + kde_locale='\${datadir}/locale' + fi + if test -z "$kde_cgidir"; then + kde_cgidir='\${exec_prefix}/cgi-bin' + fi + if test -z "$kde_confdir"; then + kde_confdir='\${datadir}/config' + fi + if test -z "$kde_kcfgdir"; then + kde_kcfgdir='\${datadir}/config.kcfg' + fi + if test -z "$kde_mimedir"; then + kde_mimedir='\${datadir}/mimelnk' + fi + if test -z "$kde_toolbardir"; then + kde_toolbardir='\${datadir}/toolbar' + fi + if test -z "$kde_wallpaperdir"; then + kde_wallpaperdir='\${datadir}/wallpapers' + fi + if test -z "$kde_templatesdir"; then + kde_templatesdir='\${datadir}/templates' + fi + if test -z "$kde_bindir"; then + kde_bindir='\${exec_prefix}/bin' + fi + if test -z "$kde_servicesdir"; then + kde_servicesdir='\${datadir}/services' + fi + if test -z "$kde_servicetypesdir"; then + kde_servicetypesdir='\${datadir}/servicetypes' + fi + if test -z "$kde_moduledir"; then + if test "$kde_qtver" = "2"; then + kde_moduledir='\${libdir}/kde2' + else + kde_moduledir='\${libdir}/kde3' + fi + fi + if test -z "$kde_styledir"; then + kde_styledir='\${libdir}/kde3/plugins/styles' + fi + if test -z "$kde_widgetdir"; then + kde_widgetdir='\${libdir}/kde3/plugins/designer' + fi + if test -z "$xdg_appsdir"; then + xdg_appsdir='\${datadir}/applications/kde' + fi + if test -z "$xdg_menudir"; then + xdg_menudir='\${sysconfdir}/xdg/menus' + fi + if test -z "$xdg_directorydir"; then + xdg_directorydir='\${datadir}/desktop-directories' + fi + + KDE_SET_PATHS(defaults) + +else + + if test $kde_qtver = 1; then + AC_MSG_RESULT([compiling]) + KDE_1_CHECK_PATHS + else + AC_MSG_ERROR([path checking not yet supported for KDE 2]) + fi + +fi +]) + +AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS], +[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || + test -z "$kde_icondir" || test -z "$kde_sounddir" || + test -z "$kde_datadir" || test -z "$kde_locale" || + test -z "$kde_cgidir" || test -z "$kde_confdir" || + test -z "$kde_kcfgdir" || + test -z "$kde_mimedir" || test -z "$kde_toolbardir" || + test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || + test -z "$kde_bindir" || test -z "$kde_servicesdir" || + test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || + test -z "$kde_styledir" || test -z "kde_widgetdir" || + test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" || + test "x$kde_have_all_paths" != "xyes"; then + kde_have_all_paths=no + fi +]) + +AC_DEFUN([KDE_MISSING_PROG_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed KDE correctly. +]) +]) + +AC_DEFUN([KDE_MISSING_ARTS_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed aRts correctly or use +--without-arts to compile without aRts support (this will remove functionality). +]) +]) + +AC_DEFUN([KDE_SET_DEFAULT_BINDIRS], +[ + kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" + test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs" + if test -n "$KDEDIRS"; then + kde_save_IFS=$IFS + IFS=: + for dir in $KDEDIRS; do + kde_default_bindirs="$dir/bin $kde_default_bindirs " + done + IFS=$kde_save_IFS + fi +]) + +AC_DEFUN([KDE_SUBST_PROGRAMS], +[ + AC_ARG_WITH(arts, + AC_HELP_STRING([--without-arts],[build without aRts [default=no]]), + [build_arts=$withval], + [build_arts=yes] + ) + AM_CONDITIONAL(include_ARTS, test "$build_arts" '!=' "no") + if test "$build_arts" = "no"; then + AC_DEFINE(WITHOUT_ARTS, 1, [Defined if compiling without arts]) + fi + + KDE_SET_DEFAULT_BINDIRS + kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs" + KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) + KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) + if test "$build_arts" '!=' "no"; then + KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) + KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) + fi + KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) + + kde32ornewer=1 + kde33ornewer=1 + if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then + kde32ornewer= + kde33ornewer= + else + if test "$kde_qtver" = "3"; then + if test "$kde_qtsubver" -le 1; then + kde32ornewer= + fi + if test "$kde_qtsubver" -le 2 -o `$KDECONFIG --version | grep KDE | sed 's/KDE: \(...\).*/\1/'` = 3.2; then + kde33ornewer= + fi + fi + fi + + if test -n "$kde32ornewer"; then + KDE_FIND_PATH(kconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kconfig_compiler)]) + KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)]) + fi + if test -n "$kde33ornewer"; then + KDE_FIND_PATH(makekdewidgets, MAKEKDEWIDGETS, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(makekdewidgets)]) + AC_SUBST(MAKEKDEWIDGETS) + fi + KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin], [XMLLINT=""]) + + if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then + kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" + test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" + AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) + if test "$KDE_XSL_STYLESHEET" = "NO"; then + KDE_XSL_STYLESHEET="" + else + KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" + fi + fi + + DCOP_DEPENDENCIES='$(DCOPIDL)' + if test -n "$kde32ornewer"; then + KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)' + DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)' + AC_SUBST(KCONFIG_COMPILER) + AC_SUBST(KCFG_DEPENDENCIES) + AC_SUBST(DCOPIDLNG) + fi + AC_SUBST(DCOPIDL) + AC_SUBST(DCOPIDL2CPP) + AC_SUBST(DCOP_DEPENDENCIES) + AC_SUBST(MCOPIDL) + AC_SUBST(ARTSCCONFIG) + AC_SUBST(MEINPROC) + AC_SUBST(KDE_XSL_STYLESHEET) + AC_SUBST(XMLLINT) +])dnl + +AC_DEFUN([AC_CREATE_KFSSTND], +[ +AC_REQUIRE([AC_CHECK_RPATH]) + +AC_MSG_CHECKING([for KDE paths]) +kde_result="" +kde_cached_paths=yes +AC_CACHE_VAL(kde_cv_all_paths, +[ + KDE_SET_DEFAULT_PATHS($1) + kde_cached_paths=no +]) +eval "$kde_cv_all_paths" +KDE_CHECK_PATHS_FOR_COMPLETENESS +if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then + # wrong values were cached, may be, we can set better ones + kde_result= + kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= + kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir= + kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= + kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= + kde_have_all_paths= + kde_styledir= + kde_widgetdir= + xdg_appsdir = xdg_menudir= xdg_directorydir= + KDE_SET_DEFAULT_PATHS($1) + eval "$kde_cv_all_paths" + KDE_CHECK_PATHS_FOR_COMPLETENESS + kde_result="$kde_result (cache overridden)" +fi +if test "$kde_have_all_paths" = "no"; then + AC_MSG_ERROR([configure could not run a little KDE program to test the environment. +Since it had compiled and linked before, it must be a strange problem on your system. +Look at config.log for details. If you are not able to fix this, look at +http://www.kde.org/faq/installation.html or any www.kde.org mirror. +(If you're using an egcs version on Linux, you may update binutils!) +]) +else + rm -f conftest* + AC_MSG_RESULT($kde_result) +fi + +bindir=$kde_bindir + +KDE_SUBST_PROGRAMS + +]) + +AC_DEFUN([AC_SUBST_KFSSTND], +[ +AC_SUBST(kde_htmldir) +AC_SUBST(kde_appsdir) +AC_SUBST(kde_icondir) +AC_SUBST(kde_sounddir) +AC_SUBST(kde_datadir) +AC_SUBST(kde_locale) +AC_SUBST(kde_confdir) +AC_SUBST(kde_kcfgdir) +AC_SUBST(kde_mimedir) +AC_SUBST(kde_wallpaperdir) +AC_SUBST(kde_bindir) +dnl X Desktop Group standards +AC_SUBST(xdg_appsdir) +AC_SUBST(xdg_menudir) +AC_SUBST(xdg_directorydir) +dnl for KDE 2 +AC_SUBST(kde_templatesdir) +AC_SUBST(kde_servicesdir) +AC_SUBST(kde_servicetypesdir) +AC_SUBST(kde_moduledir) +AC_SUBST(kdeinitdir, '$(kde_moduledir)') +AC_SUBST(kde_styledir) +AC_SUBST(kde_widgetdir) +if test "$kde_qtver" = 1; then + kde_minidir="$kde_icondir/mini" +else +# for KDE 1 - this breaks KDE2 apps using minidir, but +# that's the plan ;-/ + kde_minidir="/dev/null" +fi +dnl AC_SUBST(kde_minidir) +dnl AC_SUBST(kde_cgidir) +dnl AC_SUBST(kde_toolbardir) +]) + +AC_DEFUN([KDE_MISC_TESTS], +[ + dnl Checks for libraries. + AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD + AC_SUBST(LIBUTIL) + AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD + AC_SUBST(LIBCOMPAT) + kde_have_crypt= + AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], + AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ + AC_MSG_WARN([you have no crypt in either libcrypt or libc. +You should install libcrypt from another source or configure with PAM +support]) + kde_have_crypt=no + ])) + AC_SUBST(LIBCRYPT) + if test $kde_have_crypt = yes; then + AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) + fi + AC_CHECK_SOCKLEN_T + AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) + if test $ac_cv_lib_dnet_dnet_ntoa = no; then + AC_CHECK_LIB(dnet_stub, dnet_ntoa, + [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) + fi + AC_CHECK_FUNC(inet_ntoa) + if test $ac_cv_func_inet_ntoa = no; then + AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") + fi + AC_CHECK_FUNC(connect) + if test $ac_cv_func_connect = no; then + AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , + $X_EXTRA_LIBS) + fi + + AC_CHECK_FUNC(remove) + if test $ac_cv_func_remove = no; then + AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. + AC_CHECK_FUNC(shmat, , + AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) + + # more headers that need to be explicitly included on darwin + AC_CHECK_HEADERS(sys/types.h stdint.h) + + # sys/bitypes.h is needed for uint32_t and friends on Tru64 + AC_CHECK_HEADERS(sys/bitypes.h) + + # darwin requires a poll emulation library + AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") + + # for some image handling on Mac OS X + AC_CHECK_HEADERS(Carbon/Carbon.h) + + # CoreAudio framework + AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ + AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) + FRAMEWORK_COREAUDIO="-Xlinker -framework -Xlinker CoreAudio" + ]) + + AC_CHECK_RES_INIT + AC_SUBST(LIB_POLL) + AC_SUBST(FRAMEWORK_COREAUDIO) + LIBSOCKET="$X_EXTRA_LIBS" + AC_SUBST(LIBSOCKET) + AC_SUBST(X_EXTRA_LIBS) + AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 + AC_SUBST(LIBUCB) + + case $host in dnl this *is* LynxOS specific + *-*-lynxos* ) + AC_MSG_CHECKING([LynxOS header file wrappers]) + [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] + AC_MSG_RESULT(disabled) + AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS + ;; + esac + + KDE_CHECK_TYPES + KDE_CHECK_LIBDL + KDE_CHECK_STRLCPY + +# darwin needs this to initialize the environment +AC_CHECK_HEADERS(crt_externs.h) +AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) + +AH_VERBATIM(_DARWIN_ENVIRON, +[ +#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) +# include +# include +# define environ (*_NSGetEnviron()) +#endif +]) + +AH_VERBATIM(_AIX_STRINGS_H_BZERO, +[ +/* + * AIX defines FD_SET in terms of bzero, but fails to include + * that defines bzero. + */ + +#if defined(_AIX) +#include +#endif +]) + +AC_CHECK_FUNCS([vsnprintf snprintf]) + +AH_VERBATIM(_TRU64,[ +/* + * On HP-UX, the declaration of vsnprintf() is needed every time ! + */ + +#if !defined(HAVE_VSNPRINTF) || defined(hpux) +#if __STDC__ +#include +#include +#else +#include +#endif +#ifdef __cplusplus +extern "C" +#endif +int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); +#ifdef __cplusplus +extern "C" +#endif +int snprintf(char *str, size_t n, char const *fmt, ...); +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Find the header files and libraries for X-Windows. Extended the +dnl macro AC_PATH_X +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([K_PATH_X], +[ +AC_REQUIRE([KDE_MISC_TESTS])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_ARG_ENABLE( + embedded, + AC_HELP_STRING([--enable-embedded],[link to Qt-embedded, don't use X]), + kde_use_qt_emb=$enableval, + kde_use_qt_emb=no +) + +AC_ARG_ENABLE( + qtopia, + AC_HELP_STRING([--enable-qtopia],[link to Qt-embedded, link to the Qtopia Environment]), + kde_use_qt_emb_palm=$enableval, + kde_use_qt_emb_palm=no +) + +AC_ARG_ENABLE( + mac, + AC_HELP_STRING([--enable-mac],[link to Qt/Mac (don't use X)]), + kde_use_qt_mac=$enableval, + kde_use_qt_mac=no +) + +# used to disable x11-specific stuff on special platforms +AM_CONDITIONAL(include_x11, test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no") + +if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then + +AC_MSG_CHECKING(for X) + +AC_CACHE_VAL(kde_cv_have_x, +[# One or both of the vars are not set, and there is no cached value. +if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then + kde_x_includes=NO +else + kde_x_includes=$x_includes +fi +if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then + kde_x_libraries=NO +else + kde_x_libraries=$x_libraries +fi + +# below we use the standard autoconf calls +ac_x_libraries=$kde_x_libraries +ac_x_includes=$kde_x_includes + +KDE_PATH_X_DIRECT +dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. +dnl Unfortunately, if compiling with the N32 ABI, this is not the correct +dnl location. The correct location is /usr/lib32 or an undefined value +dnl (the linker is smart enough to pick the correct default library). +dnl Things work just fine if you use just AC_PATH_X_DIRECT. +dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to +dnl /usr/openwin/include, which doesn't work. /usr/include does work, so +dnl x_includes should be left alone. +case "$host" in +mips-sgi-irix6*) + ;; +*-*-solaris*) + ;; +*) + _AC_PATH_X_XMKMF + if test -z "$ac_x_includes"; then + ac_x_includes="." + fi + if test -z "$ac_x_libraries"; then + ac_x_libraries="/usr/lib${kdelibsuff}" + fi +esac +#from now on we use our own again + +# when the user already gave --x-includes, we ignore +# what the standard autoconf macros told us. +if test "$kde_x_includes" = NO; then + kde_x_includes=$ac_x_includes +fi + +# for --x-libraries too +if test "$kde_x_libraries" = NO; then + kde_x_libraries=$ac_x_libraries +fi + +if test "$kde_x_includes" = NO; then + AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) +fi + +if test "$kde_x_libraries" = NO; then + AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) +fi + +# Record where we found X for the cache. +kde_cv_have_x="have_x=yes \ + kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" +])dnl + +eval "$kde_cv_have_x" + +if test "$have_x" != yes; then + AC_MSG_RESULT($have_x) + no_x=yes +else + AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) +fi + +if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then + X_INCLUDES="" + x_includes="."; dnl better than nothing :- + else + x_includes=$kde_x_includes + X_INCLUDES="-I$x_includes" +fi + +if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then + X_LDFLAGS="" + x_libraries="/usr/lib"; dnl better than nothing :- + else + x_libraries=$kde_x_libraries + X_LDFLAGS="-L$x_libraries" +fi +all_includes="$X_INCLUDES" +all_libraries="$X_LDFLAGS $LDFLAGS_AS_NEEDED $LDFLAGS_NEW_DTAGS" + +# Check for libraries that X11R6 Xt/Xaw programs need. +ac_save_LDFLAGS="$LDFLAGS" +LDFLAGS="$LDFLAGS $X_LDFLAGS" +# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to +# check for ICE first), but we must link in the order -lSM -lICE or +# we get undefined symbols. So assume we have SM if we have ICE. +# These have to be linked with before -lX11, unlike the other +# libraries we check for below, so use a different variable. +# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. +AC_CHECK_LIB(ICE, IceConnectionNumber, + [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) +LDFLAGS="$ac_save_LDFLAGS" + +LIB_X11='-lX11 $(LIBSOCKET)' + +AC_MSG_CHECKING(for libXext) +AC_CACHE_VAL(kde_cv_have_libXext, +[ +kde_ldflags_safe="$LDFLAGS" +kde_libs_safe="$LIBS" + +LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" +LIBS="-lXext -lX11 $LIBSOCKET" + +AC_TRY_LINK([ +#include +#ifdef STDC_HEADERS +# include +#endif +], +[ +printf("hello Xext\n"); +], +kde_cv_have_libXext=yes, +kde_cv_have_libXext=no +) + +LDFLAGS=$kde_ldflags_safe +LIBS=$kde_libs_safe +]) + +AC_MSG_RESULT($kde_cv_have_libXext) + +if test "$kde_cv_have_libXext" = "no"; then + AC_MSG_ERROR([We need a working libXext to proceed. Since configure +can't find it itself, we stop here assuming that make wouldn't find +them either.]) +fi + +LIB_XEXT="-lXext" +QTE_NORTTI="" + +elif test "$kde_use_qt_emb" = "yes"; then + dnl We're using QT Embedded + CPPFLAGS=-DQWS + CXXFLAGS="$CXXFLAGS -fno-rtti" + QTE_NORTTI="-fno-rtti -DQWS" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +elif test "$kde_use_qt_mac" = "yes"; then + dnl We're using QT/Mac (I use QT_MAC so that qglobal.h doesn't *have* to + dnl be included to get the information) --Sam + CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp" + CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +fi +AC_SUBST(X_PRE_LIBS) +AC_SUBST(LIB_X11) +AC_SUBST(LIB_XRENDER) +AC_SUBST(LIBSM) +AC_SUBST(X_INCLUDES) +AC_SUBST(X_LDFLAGS) +AC_SUBST(x_includes) +AC_SUBST(x_libraries) +AC_SUBST(QTE_NORTTI) +AC_SUBST(LIB_XEXT) + +]) + +AC_DEFUN([KDE_PRINT_QT_PROGRAM], +[ +AC_REQUIRE([KDE_USE_QT]) +cat > conftest.$ac_ext < +#include +EOF +if test "$kde_qtver" = "2"; then +cat >> conftest.$ac_ext < +#include +#include +EOF + +if test $kde_qtsubver -gt 0; then +cat >> conftest.$ac_ext <> conftest.$ac_ext < +#include +#include +EOF +fi + +echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext +cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC +fi + +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" +export LD_LIBRARY_PATH +LIBRARY_PATH="$ac_LIBRARY_PATH" +export LIBRARY_PATH +AC_LANG_RESTORE +]) + +if test "$kde_cv_qt_direct" = "yes"; then + AC_MSG_RESULT(yes) + $1 +else + AC_MSG_RESULT(no) + $2 +fi +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the Qt headers and libraries. +dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) +dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_1_3], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([KDE_USE_QT]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +dnl ------------------------------------------------------------------------ +dnl Add configure flag to enable linking to MT version of Qt library. +dnl ------------------------------------------------------------------------ + +AC_ARG_ENABLE( + mt, + AC_HELP_STRING([--disable-mt],[link to non-threaded Qt (deprecated)]), + kde_use_qt_mt=$enableval, + [ + if test $kde_qtver = 3; then + kde_use_qt_mt=yes + else + kde_use_qt_mt=no + fi + ] +) + +USING_QT_MT="" + +dnl ------------------------------------------------------------------------ +dnl If we not get --disable-qt-mt then adjust some vars for the host. +dnl ------------------------------------------------------------------------ + +KDE_MT_LDFLAGS= +KDE_MT_LIBS= +if test "x$kde_use_qt_mt" = "xyes"; then + KDE_CHECK_THREADING + if test "x$kde_use_threading" = "xyes"; then + CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" + KDE_MT_LDFLAGS="$USE_THREADS" + KDE_MT_LIBS="$LIBPTHREAD" + else + kde_use_qt_mt=no + fi +fi +AC_SUBST(KDE_MT_LDFLAGS) +AC_SUBST(KDE_MT_LIBS) + +kde_qt_was_given=yes + +dnl ------------------------------------------------------------------------ +dnl If we haven't been told how to link to Qt, we work it out for ourselves. +dnl ------------------------------------------------------------------------ +if test -z "$LIBQT_GLOB"; then + if test "x$kde_use_qt_emb" = "xyes"; then + LIBQT_GLOB="libqte.*" + else + LIBQT_GLOB="libqt.*" + fi +fi + +dnl ------------------------------------------------------------ +dnl If we got --enable-embedded then adjust the Qt library name. +dnl ------------------------------------------------------------ +if test "x$kde_use_qt_emb" = "xyes"; then + qtlib="qte" +else + qtlib="qt" +fi + +kde_int_qt="-l$qtlib" + +if test -z "$LIBQPE"; then +dnl ------------------------------------------------------------ +dnl If we got --enable-palmtop then add -lqpe to the link line +dnl ------------------------------------------------------------ + if test "x$kde_use_qt_emb" = "xyes"; then + if test "x$kde_use_qt_emb_palm" = "xyes"; then + LIB_QPE="-lqpe" + else + LIB_QPE="" + fi + else + LIB_QPE="" + fi +fi + +dnl ------------------------------------------------------------------------ +dnl If we got --enable-qt-mt then adjust the Qt library name for the host. +dnl ------------------------------------------------------------------------ + +if test "x$kde_use_qt_mt" = "xyes"; then + LIBQT="-l$qtlib-mt" + kde_int_qt="-l$qtlib-mt" + LIBQT_GLOB="lib$qtlib-mt.*" + USING_QT_MT="using -mt" +else + LIBQT="-l$qtlib" +fi + +if test $kde_qtver != 1; then + + AC_REQUIRE([AC_FIND_PNG]) + AC_REQUIRE([AC_FIND_JPEG]) + LIBQT="$LIBQT $LIBPNG $LIBJPEG" +fi + +if test $kde_qtver = 3; then + AC_REQUIRE([KDE_CHECK_LIBDL]) + LIBQT="$LIBQT $LIBDL" +fi + +AC_MSG_CHECKING([for Qt]) + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" +fi +ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO +qt_libraries="" +qt_includes="" +AC_ARG_WITH(qt-dir, + AC_HELP_STRING([--with-qt-dir=DIR],[where the root of Qt is installed ]), + [ ac_qt_includes="$withval"/include + ac_qt_libraries="$withval"/lib${kdelibsuff} + ac_qt_bindir="$withval"/bin + ]) + +AC_ARG_WITH(qt-includes, + AC_HELP_STRING([--with-qt-includes=DIR],[where the Qt includes are. ]), + [ + ac_qt_includes="$withval" + ]) + +kde_qt_libs_given=no + +AC_ARG_WITH(qt-libraries, + AC_HELP_STRING([--with-qt-libraries=DIR],[where the Qt library is installed.]), + [ ac_qt_libraries="$withval" + kde_qt_libs_given=yes + ]) + +AC_CACHE_VAL(ac_cv_have_qt, +[#try to guess Qt locations + +qt_incdirs="" +for dir in $kde_qt_dirs; do + qt_incdirs="$qt_incdirs $dir/include $dir" +done +qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" +if test ! "$ac_qt_includes" = "NO"; then + qt_incdirs="$ac_qt_includes $qt_incdirs" +fi + +if test "$kde_qtver" != "1"; then + kde_qt_header=qstyle.h +else + kde_qt_header=qglobal.h +fi + +AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) +ac_qt_includes="$qt_incdir" + +qt_libdirs="" +for dir in $kde_qt_dirs; do + qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir" +done +qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" +if test ! "$ac_qt_libraries" = "NO"; then + qt_libdir=$ac_qt_libraries +else + qt_libdirs="$ac_qt_libraries $qt_libdirs" + # if the Qt was given, the chance is too big that libqt.* doesn't exist + qt_libdir=NONE + for dir in $qt_libdirs; do + try="ls -1 $dir/${LIBQT_GLOB}" + if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done +fi +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIBQT="$LIBQT ${kde_int_qt}_incremental" + break + fi +done + +ac_qt_libraries="$qt_libdir" + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + +ac_cxxflags_safe="$CXXFLAGS" +ac_ldflags_safe="$LDFLAGS" +ac_libs_safe="$LIBS" + +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" +LIBS="$LIBS $LIBQT $KDE_MT_LIBS" + +KDE_PRINT_QT_PROGRAM + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* +else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC + ac_qt_libraries="NO" +fi +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +AC_LANG_RESTORE +if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then + ac_cv_have_qt="have_qt=no" + ac_qt_notfound="" + missing_qt_mt="" + if test "$ac_qt_includes" = NO; then + if test "$ac_qt_libraries" = NO; then + ac_qt_notfound="(headers and libraries)"; + else + ac_qt_notfound="(headers)"; + fi + else + if test "x$kde_use_qt_mt" = "xyes"; then + missing_qt_mt=" +Make sure that you have compiled Qt with thread support!" + ac_qt_notfound="(library $qtlib-mt)"; + else + ac_qt_notfound="(library $qtlib)"; + fi + fi + + AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! +For more details about this problem, look at the end of config.log.$missing_qt_mt]) +else + have_qt="yes" +fi +]) + +eval "$ac_cv_have_qt" + +if test "$have_qt" != yes; then + AC_MSG_RESULT([$have_qt]); +else + ac_cv_have_qt="have_qt=yes \ + ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" + AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) + + qt_libraries="$ac_qt_libraries" + qt_includes="$ac_qt_includes" +fi + +if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then + KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) +fi + +AC_SUBST(qt_libraries) +AC_SUBST(qt_includes) + +if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then + QT_INCLUDES="" +else + QT_INCLUDES="-I$qt_includes" + all_includes="$QT_INCLUDES $all_includes" +fi + +if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then + QT_LDFLAGS="" +else + QT_LDFLAGS="-L$qt_libraries" + all_libraries="$QT_LDFLAGS $all_libraries" +fi +test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" + +AC_SUBST(QT_INCLUDES) +AC_SUBST(QT_LDFLAGS) +AC_PATH_QT_MOC_UIC + +KDE_CHECK_QT_JPEG + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' +else +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)' +fi +test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIB_QT="$LIB_QT ${kde_int_qt}_incremental" + break + fi +done + +AC_SUBST(LIB_QT) +AC_SUBST(LIB_QPE) + +AC_SUBST(kde_qtver) +]) + +AC_DEFUN([AC_PATH_QT], +[ +AC_PATH_QT_1_3 +]) + +AC_DEFUN([KDE_CHECK_UIC_PLUGINS], +[ +AC_REQUIRE([AC_PATH_QT_MOC_UIC]) + +if test x$ac_uic_supports_libpath = xyes; then + +AC_MSG_CHECKING([if UIC has KDE plugins available]) +AC_CACHE_VAL(kde_cv_uic_plugins, +[ +cat > actest.ui << EOF + +NewConnectionDialog + + + + testInput + + + + +EOF + + + +kde_cv_uic_plugins=no +kde_line="$UIC_PATH -L $kde_widgetdir" +if test x$ac_uic_supports_nounload = xyes; then + kde_line="$kde_line -nounload" +fi +kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" +if AC_TRY_EVAL(kde_line); then + # if you're trying to debug this check and think it's incorrect, + # better check your installation. The check _is_ correct - your + # installation is not. + if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then + kde_cv_uic_plugins=yes + fi +fi +rm -f actest.ui actest.cpp +]) + +AC_MSG_RESULT([$kde_cv_uic_plugins]) +if test "$kde_cv_uic_plugins" != yes; then + AC_MSG_ERROR([ +you need to install kdelibs first. + +If you did install kdelibs, then the Qt version that is picked up by +this configure is not the same version you used to compile kdelibs. +The Qt Plugin installed by kdelibs is *ONLY* loadable if its the +same Qt version, compiled with the same compiler and the same Qt +configuration settings. +]) +fi +fi +]) + +AC_DEFUN([KDE_CHECK_FINAL], +[ + AC_ARG_ENABLE(final, + AC_HELP_STRING([--enable-final], + [build size optimized apps (experimental - needs lots of memory)]), + kde_use_final=$enableval, kde_use_final=no) + + if test "x$kde_use_final" = "xyes"; then + KDE_USE_FINAL_TRUE="" + KDE_USE_FINAL_FALSE="#" + else + KDE_USE_FINAL_TRUE="#" + KDE_USE_FINAL_FALSE="" + fi + AC_SUBST(KDE_USE_FINAL_TRUE) + AC_SUBST(KDE_USE_FINAL_FALSE) +]) + +AC_DEFUN([KDE_CHECK_CLOSURE], +[ + AC_ARG_ENABLE(closure, + AC_HELP_STRING([--enable-closure],[delay template instantiation]), + kde_use_closure=$enableval, kde_use_closure=no) + + KDE_NO_UNDEFINED="" + if test "x$kde_use_closure" = "xyes"; then + KDE_USE_CLOSURE_TRUE="" + KDE_USE_CLOSURE_FALSE="#" +# CXXFLAGS="$CXXFLAGS $REPO" + else + KDE_USE_CLOSURE_TRUE="#" + KDE_USE_CLOSURE_FALSE="" + KDE_NO_UNDEFINED="" + case $host in + *-*-linux-gnu) + KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], + [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], + [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], + [KDE_NO_UNDEFINED=""])], + [KDE_NO_UNDEFINED=""]) + ;; + esac + fi + AC_SUBST(KDE_USE_CLOSURE_TRUE) + AC_SUBST(KDE_USE_CLOSURE_FALSE) + AC_SUBST(KDE_NO_UNDEFINED) +]) + +dnl Check if the linker supports --enable-new-dtags and --as-needed +AC_DEFUN([KDE_CHECK_NEW_LDFLAGS], +[ + AC_ARG_ENABLE(new_ldflags, + AC_HELP_STRING([--enable-new-ldflags], + [enable the new linker flags]), + kde_use_new_ldflags=$enableval, + kde_use_new_ldflags=no) + + LDFLAGS_AS_NEEDED="" + LDFLAGS_NEW_DTAGS="" + if test "x$kde_use_new_ldflags" = "xyes"; then + LDFLAGS_NEW_DTAGS="" + KDE_CHECK_COMPILER_FLAG([Wl,--enable-new-dtags], + [LDFLAGS_NEW_DTAGS="-Wl,--enable-new-dtags"],) + + KDE_CHECK_COMPILER_FLAG([Wl,--as-needed], + [LDFLAGS_AS_NEEDED="-Wl,--as-needed"],) + fi + AC_SUBST(LDFLAGS_AS_NEEDED) + AC_SUBST(LDFLAGS_NEW_DTAGS) +]) + +AC_DEFUN([KDE_CHECK_NMCHECK], +[ + AC_ARG_ENABLE(nmcheck,AC_HELP_STRING([--enable-nmcheck],[enable automatic namespace cleanness check]), + kde_use_nmcheck=$enableval, kde_use_nmcheck=no) + + if test "$kde_use_nmcheck" = "yes"; then + KDE_USE_NMCHECK_TRUE="" + KDE_USE_NMCHECK_FALSE="#" + else + KDE_USE_NMCHECK_TRUE="#" + KDE_USE_NMCHECK_FALSE="" + fi + AC_SUBST(KDE_USE_NMCHECK_TRUE) + AC_SUBST(KDE_USE_NMCHECK_FALSE) +]) + +AC_DEFUN([KDE_EXPAND_MAKEVAR], [ +savex=$exec_prefix +test "x$exec_prefix" = xNONE && exec_prefix=$prefix +tmp=$$2 +while $1=`eval echo "$tmp"`; test "x$$1" != "x$tmp"; do tmp=$$1; done +exec_prefix=$savex +]) + +dnl ------------------------------------------------------------------------ +dnl Now, the same with KDE +dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) +dnl and $(kde_includes) will be the kdehdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_BASE_PATH_KDE], +[ +AC_REQUIRE([KDE_CHECK_STL]) +AC_REQUIRE([AC_PATH_QT])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_CHECK_RPATH +AC_MSG_CHECKING([for KDE]) + +if test "${prefix}" != NONE; then + kde_includes=${includedir} + KDE_EXPAND_MAKEVAR(ac_kde_includes, includedir) + + kde_libraries=${libdir} + KDE_EXPAND_MAKEVAR(ac_kde_libraries, libdir) + +else + ac_kde_includes= + ac_kde_libraries= + kde_libraries="" + kde_includes="" +fi + +AC_CACHE_VAL(ac_cv_have_kde, +[#try to guess kde locations + +if test "$kde_qtver" = 1; then + kde_check_header="ksock.h" + kde_check_lib="libkdecore.la" +else + kde_check_header="ksharedptr.h" + kde_check_lib="libkio.la" +fi + +if test -z "$1"; then + +kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" +test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" +kde_incdirs="$ac_kde_includes $kde_incdirs" +AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) +ac_kde_includes="$kde_incdir" + +if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then + AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE headers installed. This will fail. +So, check this please and use another prefix!]) +fi + +kde_libdirs="$kde_libs_prefix/lib${kdelibsuff} /usr/lib/kde/lib${kdelibsuff} /usr/local/kde/lib${kdelibsuff} /usr/kde/lib${kdelibsuff} /usr/lib${kdelibsuff}/kde /usr/lib${kdelibsuff}/kde3 /usr/lib${kdelibsuff} /usr/X11R6/lib${kdelibsuff} /usr/local/lib${kdelibsuff} /opt/kde3/lib${kdelibsuff} /opt/kde/lib${kdelibsuff} /usr/X11R6/kde/lib${kdelibsuff}" +test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib${kdelibsuff} $KDEDIR $kde_libdirs" +kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" +AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) +ac_kde_libraries="$kde_libdir" + +kde_widgetdir=NO +dnl this might be somewhere else +AC_FIND_FILE("kde3/plugins/designer/kdewidgets.la", $kde_libdirs, kde_widgetdir) + +if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then +AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE libraries installed. This will fail. +So, check this please and use another prefix!]) +fi + +if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/kdewidgets.la"; then +AC_MSG_ERROR([ +I can't find the designer plugins. These are required and should have been installed +by kdelibs]) +fi + +if test -n "$kde_widgetdir"; then + kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" +fi + + +if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then + ac_cv_have_kde="have_kde=no" +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" +fi + +else dnl test -z $1, e.g. from kdelibs + + ac_cv_have_kde="have_kde=no" + +fi +])dnl + +eval "$ac_cv_have_kde" + +if test "$have_kde" != "yes"; then + if test "${prefix}" = NONE; then + ac_kde_prefix="$ac_default_prefix" + else + ac_kde_prefix="$prefix" + fi + if test "$exec_prefix" = NONE; then + ac_kde_exec_prefix="$ac_kde_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix]) + else + ac_kde_exec_prefix="$exec_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) + fi + + kde_libraries="${libdir}" + kde_includes="${includedir}" + +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" + AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) + + kde_libraries="$ac_kde_libraries" + kde_includes="$ac_kde_includes" +fi +AC_SUBST(kde_libraries) +AC_SUBST(kde_includes) + +if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then + KDE_INCLUDES="" +else + KDE_INCLUDES="-I$kde_includes" + all_includes="$KDE_INCLUDES $all_includes" +fi + +KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" + +KDE_LDFLAGS="-L$kde_libraries" +if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then + all_libraries="$KDE_LDFLAGS $all_libraries" +fi + +AC_SUBST(KDE_LDFLAGS) +AC_SUBST(KDE_INCLUDES) + +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +all_libraries="$all_libraries $USER_LDFLAGS" +all_includes="$all_includes $USER_INCLUDES" +AC_SUBST(all_includes) +AC_SUBST(all_libraries) + +if test -z "$1"; then +KDE_CHECK_UIC_PLUGINS +fi + +ac_kde_libraries="$kde_libdir" + +AC_SUBST(AUTODIRS) + + +]) + +AC_DEFUN([KDE_CHECK_EXTRA_LIBS], +[ +AC_MSG_CHECKING(for extra includes) +AC_ARG_WITH(extra-includes,AC_HELP_STRING([--with-extra-includes=DIR],[adds non standard include paths]), + kde_use_extra_includes="$withval", + kde_use_extra_includes=NONE +) +kde_extra_includes= +if test -n "$kde_use_extra_includes" && \ + test "$kde_use_extra_includes" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_includes; do + kde_extra_includes="$kde_extra_includes $dir" + USER_INCLUDES="$USER_INCLUDES -I$dir" + done + IFS=$ac_save_ifs + kde_use_extra_includes="added" +else + kde_use_extra_includes="no" +fi +AC_SUBST(USER_INCLUDES) + +AC_MSG_RESULT($kde_use_extra_includes) + +kde_extra_libs= +AC_MSG_CHECKING(for extra libs) +AC_ARG_WITH(extra-libs,AC_HELP_STRING([--with-extra-libs=DIR],[adds non standard library paths]), + kde_use_extra_libs=$withval, + kde_use_extra_libs=NONE +) +if test -n "$kde_use_extra_libs" && \ + test "$kde_use_extra_libs" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_libs; do + kde_extra_libs="$kde_extra_libs $dir" + KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" + USER_LDFLAGS="$USER_LDFLAGS -L$dir" + done + IFS=$ac_save_ifs + kde_use_extra_libs="added" +else + kde_use_extra_libs="no" +fi + +AC_SUBST(USER_LDFLAGS) + +AC_MSG_RESULT($kde_use_extra_libs) + +]) + +AC_DEFUN([KDE_1_CHECK_PATH_HEADERS], +[ + AC_MSG_CHECKING([for KDE headers installed]) + AC_LANG_SAVE + AC_LANG_CPLUSPLUS +cat > conftest.$ac_ext < +#endif +#include +#include "confdefs.h" +#include + +int main() { + printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); + printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); + printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); + printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); + printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); + printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); + printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); + printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); + printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); + printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); + printf("kde_wallpaperdir=\\"%s\\"\n", + KApplication::kde_wallpaperdir().data()); + printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); + printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); + printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); + printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); + printf("kde_moduledir=\\"/tmp/dummy\\"\n"); + printf("kde_styledir=\\"/tmp/dummy\\"\n"); + printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); + printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); + printf("xdg_menudir=\\"/tmp/dummy\\"\n"); + printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); + printf("kde_kcfgdir=\\"/tmp/dummy\\"\n"); + return 0; + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$all_includes $CPPFLAGS" + if AC_TRY_EVAL(ac_compile); then + AC_MSG_RESULT(yes) + else + AC_MSG_ERROR([your system is not able to compile a small KDE application! +Check, if you installed the KDE header files correctly. +For more details about this problem, look at the end of config.log.]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_CHECK_KDEQTADDON], +[ +AC_MSG_CHECKING(for kde-qt-addon) +AC_CACHE_VAL(kde_cv_have_kdeqtaddon, +[ + kde_ldflags_safe="$LDFLAGS" + kde_libs_safe="$LIBS" + kde_cxxflags_safe="$CXXFLAGS" + + LIBS="-lkde-qt-addon $LIBQT $LIBS" + CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" + LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" + + AC_TRY_LINK([ + #include + ], + [ + QDomDocument doc; + ], + kde_cv_have_kdeqtaddon=yes, + kde_cv_have_kdeqtaddon=no + ) + + LDFLAGS=$kde_ldflags_safe + LIBS=$kde_libs_safe + CXXFLAGS=$kde_cxxflags_safe +]) + +AC_MSG_RESULT($kde_cv_have_kdeqtaddon) + +if test "$kde_cv_have_kdeqtaddon" = "no"; then + AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. +It is a separate package (and CVS module) named kde-qt-addon.]) +fi +]) + +AC_DEFUN([KDE_CREATE_LIBS_ALIASES], +[ + AC_REQUIRE([KDE_MISC_TESTS]) + AC_REQUIRE([KDE_CHECK_LIBDL]) + AC_REQUIRE([K_PATH_X]) + +if test $kde_qtver = 3; then + case $host in + *cygwin*) lib_kded="-lkdeinit_kded" ;; + *) lib_kded="" ;; + esac + AC_SUBST(LIB_KDED, $lib_kded) + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KJS, "-lkjs") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KABC, "-lkabc") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") + AC_SUBST(LIB_KUTILS, "-lkutils") + AC_SUBST(LIB_KDEPIM, "-lkdepim") + AC_SUBST(LIB_KIMPROXY, "-lkimproxy") + AC_SUBST(LIB_KNEWSTUFF, "-lknewstuff") + AC_SUBST(LIB_KDNSSD, "-lkdnssd") + AC_SUBST(LIB_KUNITTEST, "-lkunittest") +# these are for backward compatibility + AC_SUBST(LIB_KSYCOCA, "-lkio") + AC_SUBST(LIB_KFILE, "-lkio") +elif test $kde_qtver = 2; then + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KSYCOCA, "-lksycoca") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KFILE, "-lkfile") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") +else + AC_SUBST(LIB_KDECORE, "-lkdecore -lXext $(LIB_QT)") + AC_SUBST(LIB_KDEUI, "-lkdeui $(LIB_KDECORE)") + AC_SUBST(LIB_KFM, "-lkfm $(LIB_KDECORE)") + AC_SUBST(LIB_KFILE, "-lkfile $(LIB_KFM) $(LIB_KDEUI)") + AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_KDECORE)") +fi +]) + +AC_DEFUN([AC_PATH_KDE], +[ + AC_BASE_PATH_KDE + AC_ARG_ENABLE(path-check,AC_HELP_STRING([--disable-path-check],[don't try to find out, where to install]), + [ + if test "$enableval" = "no"; + then ac_use_path_checking="default" + else ac_use_path_checking="" + fi + ], + [ + if test "$kde_qtver" = 1; + then ac_use_path_checking="" + else ac_use_path_checking="default" + fi + ] + ) + + AC_CREATE_KFSSTND($ac_use_path_checking) + + AC_SUBST_KFSSTND + KDE_CREATE_LIBS_ALIASES +]) + +dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) +AC_DEFUN([KDE_CHECK_FUNC_EXT], +[ +AC_MSG_CHECKING(for $1) +AC_CACHE_VAL(kde_cv_func_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +save_CXXFLAGS="$CXXFLAGS" +kde_safe_LIBS="$LIBS" +LIBS="$LIBS $X_EXTRA_LIBS" +if test "$GXX" = "yes"; then +CXXFLAGS="$CXXFLAGS -pedantic-errors" +fi +AC_TRY_COMPILE([ +$2 +], +[ +$3 +], +kde_cv_func_$1=yes, +kde_cv_func_$1=no) +CXXFLAGS="$save_CXXFLAGS" +LIBS="$kde_safe_LIBS" +AC_LANG_RESTORE +]) + +AC_MSG_RESULT($kde_cv_func_$1) + +AC_MSG_CHECKING([if $1 needs custom prototype]) +AC_CACHE_VAL(kde_cv_proto_$1, +[ +if test "x$kde_cv_func_$1" = xyes; then + kde_cv_proto_$1=no +else + case "$1" in + setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) + kde_cv_proto_$1="yes - in libkdefakes" + ;; + *) + kde_cv_proto_$1=unknown + ;; + esac +fi + +if test "x$kde_cv_proto_$1" = xunknown; then + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + kde_safe_libs=$LIBS + LIBS="$LIBS $X_EXTRA_LIBS" + AC_TRY_LINK([ +$2 + +extern "C" $4; +], +[ +$3 +], +[ kde_cv_func_$1=yes + kde_cv_proto_$1=yes ], + [kde_cv_proto_$1="$1 unavailable"] +) +LIBS=$kde_safe_libs +AC_LANG_RESTORE +fi +]) +AC_MSG_RESULT($kde_cv_proto_$1) + +if test "x$kde_cv_func_$1" = xyes; then + AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) + $6 +fi +if test "x$kde_cv_proto_$1" = xno; then + AC_DEFINE(HAVE_$5_PROTO, 1, + [Define if you have the $1 prototype]) +fi + +AH_VERBATIM([_HAVE_$5_PROTO], +[ +#if !defined(HAVE_$5_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +$4; +#ifdef __cplusplus +} +#endif +#endif +]) +]) + +AC_DEFUN([AC_CHECK_SETENV], +[ + KDE_CHECK_FUNC_EXT(setenv, [ +#include +], + [setenv("VAR", "VALUE", 1);], + [int setenv (const char *, const char *, int)], + [SETENV]) +]) + +AC_DEFUN([AC_CHECK_UNSETENV], +[ + KDE_CHECK_FUNC_EXT(unsetenv, [ +#include +], + [unsetenv("VAR");], + [void unsetenv (const char *)], + [UNSETENV]) +]) + +AC_DEFUN([AC_CHECK_GETDOMAINNAME], +[ + KDE_CHECK_FUNC_EXT(getdomainname, [ +#include +#include +#include +], + [ +char buffer[200]; +getdomainname(buffer, 200); +], + [#include + int getdomainname (char *, size_t)], + [GETDOMAINNAME]) +]) + +AC_DEFUN([AC_CHECK_GETHOSTNAME], +[ + KDE_CHECK_FUNC_EXT(gethostname, [ +#include +#include +], + [ +char buffer[200]; +gethostname(buffer, 200); +], + [int gethostname (char *, unsigned int)], + [GETHOSTNAME]) +]) + +AC_DEFUN([AC_CHECK_USLEEP], +[ + KDE_CHECK_FUNC_EXT(usleep, [ +#include +], + [ +usleep(200); +], + [int usleep (unsigned int)], + [USLEEP]) +]) + + +AC_DEFUN([AC_CHECK_RANDOM], +[ + KDE_CHECK_FUNC_EXT(random, [ +#include +], + [ +random(); +], + [long int random(void)], + [RANDOM]) + + KDE_CHECK_FUNC_EXT(srandom, [ +#include +], + [ +srandom(27); +], + [void srandom(unsigned int)], + [SRANDOM]) + +]) + +AC_DEFUN([AC_CHECK_INITGROUPS], +[ + KDE_CHECK_FUNC_EXT(initgroups, [ +#include +#include +#include +], + [ +char buffer[200]; +initgroups(buffer, 27); +], + [int initgroups(const char *, gid_t)], + [INITGROUPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMPS], +[ + KDE_CHECK_FUNC_EXT(mkstemps, [ +#include +#include +], + [ +mkstemps("/tmp/aaaXXXXXX", 6); +], + [int mkstemps(char *, int)], + [MKSTEMPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMP], +[ + KDE_CHECK_FUNC_EXT(mkstemp, [ +#include +#include +], + [ +mkstemp("/tmp/aaaXXXXXX"); +], + [int mkstemp(char *)], + [MKSTEMP]) +]) + +AC_DEFUN([AC_CHECK_MKDTEMP], +[ + KDE_CHECK_FUNC_EXT(mkdtemp, [ +#include +#include +], + [ +mkdtemp("/tmp/aaaXXXXXX"); +], + [char *mkdtemp(char *)], + [MKDTEMP]) +]) + + +AC_DEFUN([AC_CHECK_RES_INIT], +[ + AC_MSG_CHECKING([if res_init needs -lresolv]) + kde_libs_safe="$LIBS" + LIBS="$LIBS $X_EXTRA_LIBS -lresolv" + AC_TRY_LINK( + [ +#include +#include +#include +#include + ], + [ + res_init(); + ], + [ + LIBRESOLV="-lresolv" + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) + ], + [ AC_MSG_RESULT(no) ] + ) + LIBS=$kde_libs_safe + AC_SUBST(LIBRESOLV) + + KDE_CHECK_FUNC_EXT(res_init, + [ +#include +#include +#include +#include + ], + [res_init()], + [int res_init(void)], + [RES_INIT]) +]) + +AC_DEFUN([AC_CHECK_STRLCPY], +[ + KDE_CHECK_FUNC_EXT(strlcpy, [ +#include +], +[ char buf[20]; + strlcpy(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcpy(char*, const char*, unsigned long)], + [STRLCPY]) +]) + +AC_DEFUN([AC_CHECK_STRLCAT], +[ + KDE_CHECK_FUNC_EXT(strlcat, [ +#include +], +[ char buf[20]; + buf[0]='\0'; + strlcat(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcat(char*, const char*, unsigned long)], + [STRLCAT]) +]) + +AC_DEFUN([AC_CHECK_RES_QUERY], +[ + KDE_CHECK_FUNC_EXT(res_query, [ +#include +#include +#include +#include +#include +], +[ +res_query(NULL, 0, 0, NULL, 0); +], + [int res_query(const char *, int, int, unsigned char *, int)], + [RES_QUERY]) +]) + +AC_DEFUN([AC_CHECK_DN_SKIPNAME], +[ + KDE_CHECK_FUNC_EXT(dn_skipname, [ +#include +#include +#include +#include +], +[ +dn_skipname (NULL, NULL); +], + [int dn_skipname (unsigned char *, unsigned char *)], + [DN_SKIPNAME]) +]) + + +AC_DEFUN([AC_FIND_GIF], + [AC_MSG_CHECKING([for giflib]) +AC_CACHE_VAL(ac_cv_lib_gif, +[ac_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" +else +LIBS="$all_libraries -lgif" +fi +AC_TRY_LINK(dnl +[ +#ifdef __cplusplus +extern "C" { +#endif +int GifLastError(void); +#ifdef __cplusplus +} +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +], + [return GifLastError();], + eval "ac_cv_lib_gif=yes", + eval "ac_cv_lib_gif=no") +LIBS="$ac_save_LIBS" +])dnl +if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) +else + AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) +fi +]) + +AC_DEFUN([KDE_FIND_JPEG_HELPER], +[ +AC_MSG_CHECKING([for libjpeg$2]) +AC_CACHE_VAL(ac_cv_lib_jpeg_$1, +[ +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" +ac_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[/* Override any gcc2 internal prototype to avoid an error. */ +struct jpeg_decompress_struct; +typedef struct jpeg_decompress_struct * j_decompress_ptr; +typedef int size_t; +#ifdef __cplusplus +extern "C" { +#endif + void jpeg_CreateDecompress(j_decompress_ptr cinfo, + int version, size_t structsize); +#ifdef __cplusplus +} +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +], + [jpeg_CreateDecompress(0L, 0, 0);], + eval "ac_cv_lib_jpeg_$1=-ljpeg$2", + eval "ac_cv_lib_jpeg_$1=no") +LIBS="$ac_save_LIBS" +CFLAGS="$ac_save_CFLAGS" +]) + +if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then + LIBJPEG="$ac_cv_lib_jpeg_$1" + AC_MSG_RESULT($ac_cv_lib_jpeg_$1) +else + AC_MSG_RESULT(no) + $3 +fi + +]) + +AC_DEFUN([AC_FIND_JPEG], +[ +dnl first look for libraries +KDE_FIND_JPEG_HELPER(6b, 6b, + KDE_FIND_JPEG_HELPER(normal, [], + [ + LIBJPEG= + ] + ) +) + +dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h +dnl requires system dependent includes loaded before it) +jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" +AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) +test "x$jpeg_incdir" = xNO && jpeg_incdir= + +dnl if headers _and_ libraries are missing, this is no error, and we +dnl continue with a warning (the user will get no jpeg support in khtml) +dnl if only one is missing, it means a configuration error, but we still +dnl only warn +if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then + AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) +else + if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then + AC_MSG_WARN([ +There is an installation error in jpeg support. You seem to have only one +of either the headers _or_ the libraries installed. You may need to either +provide correct --with-extra-... options, or the development package of +libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ +Disabling JPEG support. +]) + else + AC_MSG_WARN([libjpeg not found. disable JPEG support.]) + fi + jpeg_incdir= + LIBJPEG= +fi + +AC_SUBST(LIBJPEG) +AH_VERBATIM(_AC_CHECK_JPEG, +[/* + * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system + * headers and I'm too lazy to write a configure test as long as only + * unixware is related + */ +#ifdef _UNIXWARE +#define HAVE_BOOLEAN +#endif +]) +]) + +AC_DEFUN([KDE_CHECK_QT_JPEG], +[ +if test -n "$LIBJPEG"; then +AC_MSG_CHECKING([if Qt needs $LIBJPEG]) +AC_CACHE_VAL(kde_cv_qt_jpeg, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS $LIBQT" +LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` +ac_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[#include ], + [ + int argc; + char** argv; + QApplication app(argc, argv);], + eval "kde_cv_qt_jpeg=no", + eval "kde_cv_qt_jpeg=yes") +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +fi +]) + +if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then + AC_MSG_RESULT(yes) + LIBJPEG_QT='$(LIBJPEG)' +else + AC_MSG_RESULT(no) + LIBJPEG_QT= +fi + +]) + +AC_DEFUN([AC_FIND_ZLIB], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for libz]) +AC_CACHE_VAL(ac_cv_lib_z, +[ +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#include +], +[ + char buf[42]; + gzFile f = (gzFile) 0; + /* this would segfault.. but we only link, don't run */ + (void) gzgets(f, buf, sizeof(buf)); + + return (zlibVersion() == ZLIB_VERSION); +], + eval "ac_cv_lib_z='-lz'", + eval "ac_cv_lib_z=no") +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if test ! "$ac_cv_lib_z" = no; then + AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) + LIBZ="$ac_cv_lib_z" + AC_MSG_RESULT($ac_cv_lib_z) +else + AC_MSG_ERROR(not found. + Possibly configure picks up an outdated version + installed by XFree86. Remove it from your system. + + Check your installation and look into config.log) + LIBZ="" +fi +AC_SUBST(LIBZ) +]) + +AC_DEFUN([KDE_TRY_TIFFLIB], +[ +AC_MSG_CHECKING([for libtiff $1]) + +AC_CACHE_VAL(kde_cv_libtiff_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" +else +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" +fi +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl +[ +#include +], + [return (TIFFOpen( "", "r") == 0); ], +[ + kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" +], [ + kde_cv_libtiff_$1=no +]) + +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +]) + +if test "$kde_cv_libtiff_$1" = "no"; then + AC_MSG_RESULT(no) + LIBTIFF="" + $3 +else + LIBTIFF="$kde_cv_libtiff_$1" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) + $2 +fi + +]) + +AC_DEFUN([AC_FIND_TIFF], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +KDE_TRY_TIFFLIB(tiff, [], + KDE_TRY_TIFFLIB(tiff34)) + +AC_SUBST(LIBTIFF) +]) + + +AC_DEFUN([AC_FIND_PNG], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_MSG_CHECKING([for libpng]) +AC_CACHE_VAL(ac_cv_lib_png, +[ +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" +else +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" +fi +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include + ], + [ + png_structp png_ptr = png_create_read_struct( /* image ptr */ + PNG_LIBPNG_VER_STRING, 0, 0, 0 ); + return( png_ptr != 0 ); + ], + eval "ac_cv_lib_png='-lpng $LIBZ -lm'", + eval "ac_cv_lib_png=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) + LIBPNG="$ac_cv_lib_png" + AC_SUBST(LIBPNG) + AC_MSG_RESULT($ac_cv_lib_png) +else + AC_MSG_RESULT(no) + LIBPNG="" + AC_SUBST(LIBPNG) +fi +]) + + +AC_DEFUN([AC_FIND_JASPER], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_MSG_CHECKING([for jasper]) +AC_CACHE_VAL(ac_cv_jasper, +[ +kde_save_LIBS="$LIBS" +LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include + ], + [ + return( jas_init() ); + ], + eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", + eval "ac_cv_jasper=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) + LIB_JASPER="$ac_cv_jasper" + AC_MSG_RESULT($ac_cv_jasper) +else + AC_MSG_RESULT(no) + LIB_JASPER="" +fi +AC_SUBST(LIB_JASPER) +]) + +AC_DEFUN([AC_CHECK_BOOL], +[ + AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) +]) + +AC_DEFUN([AC_CHECK_GNU_EXTENSIONS], +[ +AC_MSG_CHECKING(if you need GNU extensions) +AC_CACHE_VAL(ac_cv_gnu_extensions, +[ +cat > conftest.c << EOF +#include + +#ifdef __GNU_LIBRARY__ +yes +#endif +EOF + +if (eval "$ac_cpp conftest.c") 2>&5 | + egrep "yes" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_gnu_extensions=yes +else + ac_cv_gnu_extensions=no +fi +]) + +AC_MSG_RESULT($ac_cv_gnu_extensions) +if test "$ac_cv_gnu_extensions" = "yes"; then + AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) +fi +]) + +AC_DEFUN([KDE_CHECK_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CXX supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) + CXXFLAGS="$save_CXXFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + +AC_DEFUN([KDE_CHECK_C_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CC supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cc_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_C + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cc_$kde_cache=yes"], []) + CFLAGS="$save_CFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + + +dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables +dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) +dnl it's all white-space separated +AC_DEFUN([AC_REMOVE_FORBIDDEN], +[ __val=$$1 + __forbid=" $2 " + if test -n "$__val"; then + __new="" + ac_save_IFS=$IFS + IFS=" " + for i in $__val; do + case "$__forbid" in + *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; + *) # Careful to not add spaces, where there were none, because otherwise + # libtool gets confused, if we change e.g. CXX + if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; + esac + done + IFS=$ac_save_IFS + $1=$__new + fi +]) + + +AC_DEFUN([KDE_CHECK_FOR_BAD_COMPILER], +[ + AC_MSG_CHECKING([whether $CC is blacklisted]) + + dnl In theory we have tu run this test against $CC and $CXX + dnl in C and in C++ mode, because its perfectly legal for + dnl the user to mix compiler versions, since C has a defined + dnl ABI. + dnl + dnl For now, we assume the user is not on crack. + + AC_TRY_COMPILE([ +#ifdef __GNUC__ +#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 && __GNUC_PATCHLEVEL__ == 0 +choke me +#endif +#endif +], , + kde_bad_compiler=no, + kde_bad_compiler=yes +) + + AC_MSG_RESULT($kde_bad_compiler) + +if test "$kde_bad_compiler" = "yes"; then + AC_MSG_ERROR([ + +This particular compiler version is blacklisted because it +is known to miscompile KDE. Please use a newer version, or +if that is not yet available, choose an older version. + +Please do not report a bug or bother us reporting this +configure error. We know about it, and we introduced +it by intention to avoid untraceable bugs or crashes in KDE. + +]) +fi + +]) + +dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given +AC_DEFUN([AC_VALIDIFY_CXXFLAGS], +[dnl +if test "x$kde_use_qt_emb" != "xyes"; then + AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) +else + AC_REMOVE_FORBIDDEN(CXX, [-rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) +fi +]) + +AC_DEFUN([AC_CHECK_COMPILERS], +[ + AC_ARG_ENABLE(debug, + AC_HELP_STRING([--enable-debug=ARG],[enables debug symbols (yes|no|full) [default=no]]), + [ + case $enableval in + yes) + kde_use_debug_code="yes" + kde_use_debug_define=no + ;; + full) + kde_use_debug_code="full" + kde_use_debug_define=no + ;; + *) + kde_use_debug_code="no" + kde_use_debug_define=yes + ;; + esac + ], + [kde_use_debug_code="no" + kde_use_debug_define=no + ]) + + dnl Just for configure --help + AC_ARG_ENABLE(dummyoption, + AC_HELP_STRING([--disable-debug], + [disables debug output and debug symbols [default=no]]), + [],[]) + + AC_ARG_ENABLE(strict, + AC_HELP_STRING([--enable-strict], + [compiles with strict compiler options (may not work!)]), + [ + if test $enableval = "no"; then + kde_use_strict_options="no" + else + kde_use_strict_options="yes" + fi + ], [kde_use_strict_options="no"]) + + AC_ARG_ENABLE(warnings,AC_HELP_STRING([--disable-warnings],[disables compilation with -Wall and similar]), + [ + if test $enableval = "no"; then + kde_use_warnings="no" + else + kde_use_warnings="yes" + fi + ], [kde_use_warnings="yes"]) + + dnl enable warnings for debug build + if test "$kde_use_debug_code" != "no"; then + kde_use_warnings=yes + fi + + AC_ARG_ENABLE(profile,AC_HELP_STRING([--enable-profile],[creates profiling infos [default=no]]), + [kde_use_profiling=$enableval], + [kde_use_profiling="no"] + ) + + dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS + CFLAGS=" $CFLAGS" + + AC_PROG_CC + + AC_PROG_CPP + + if test "$GCC" = "yes"; then + if test "$kde_use_debug_code" != "no"; then + if test $kde_use_debug_code = "full"; then + CFLAGS="-g3 -fno-inline $CFLAGS" + else + CFLAGS="-g -O2 $CFLAGS" + fi + else + CFLAGS="-O2 $CFLAGS" + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CFLAGS="-DNDEBUG $CFLAGS" + fi + + + case "$host" in + *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; + *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; + esac + + if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then + LDFLAGS="" + fi + + CXXFLAGS=" $CXXFLAGS" + + AC_PROG_CXX + + KDE_CHECK_FOR_BAD_COMPILER + + if test "$GXX" = "yes" || test "$CXX" = "KCC"; then + if test "$kde_use_debug_code" != "no"; then + if test "$CXX" = "KCC"; then + CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" + else + if test "$kde_use_debug_code" = "full"; then + CXXFLAGS="-g3 -fno-inline $CXXFLAGS" + else + CXXFLAGS="-g -O2 $CXXFLAGS" + fi + fi + KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) + + dnl convenience compiler flags + KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) + AC_SUBST(WOVERLOADED_VIRTUAL) + else + if test "$CXX" = "KCC"; then + CXXFLAGS="+K3 $CXXFLAGS" + else + CXXFLAGS="-O2 $CXXFLAGS" + fi + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" + fi + + if test "$kde_use_profiling" = "yes"; then + KDE_CHECK_COMPILER_FLAG(pg, + [ + CFLAGS="-pg $CFLAGS" + CXXFLAGS="-pg $CXXFLAGS" + ]) + fi + + if test "$kde_use_warnings" = "yes"; then + if test "$GCC" = "yes"; then + dnl ### FIXME: remove -Wno-non-virtual-dtor for KDE 4 + CXXFLAGS="-Wall -W -Wpointer-arith -Wno-non-virtual-dtor $CXXFLAGS" + case $host in + *-*-linux-gnu) + CFLAGS="-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" + CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS" + KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"]) + KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) + ;; + esac + KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) + KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) + KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"]) + fi + fi + + if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then + CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" + fi + + AC_ARG_ENABLE(pch, + AC_HELP_STRING([--enable-pch], + [enables precompiled header support (currently only KCC or gcc >=3.4+unsermake) [default=no]]), + [ kde_use_pch=$enableval ],[ kde_use_pch=no ]) + + HAVE_GCC_VISIBILITY=0 + AC_SUBST([HAVE_GCC_VISIBILITY]) + + if test "$GXX" = "yes"; then + KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) + KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) + KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) + KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) + ENABLE_PERMISSIVE_FLAG="-fpermissive" + + if test "$kde_use_pch" = "yes"; then + AC_MSG_CHECKING(whether gcc supports precompiling c header files) + echo >conftest.h + if $CC -x c-header conftest.h >/dev/null 2>/dev/null; then + kde_gcc_supports_pch=yes + AC_MSG_RESULT(yes) + else + kde_gcc_supports_pch=no + AC_MSG_RESULT(no) + fi + if test "$kde_gcc_supports_pch" = "yes"; then + AC_MSG_CHECKING(whether gcc supports precompiling c++ header files) + if $CXX -x c++-header conftest.h >/dev/null 2>/dev/null; then + kde_gcc_supports_pch=yes + AC_MSG_RESULT(yes) + else + kde_gcc_supports_pch=no + AC_MSG_RESULT(no) + fi + fi + rm -f conftest.h conftest.h.gch + fi + fi + AM_CONDITIONAL(unsermake_enable_pch, test "$kde_use_pch" = "yes" && test "$kde_gcc_supports_pch" = "yes") + if test "$CXX" = "KCC"; then + dnl unfortunately we currently cannot disable exception support in KCC + dnl because doing so is binary incompatible and Qt by default links with exceptions :-( + dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) + dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) + + if test "$kde_use_pch" = "yes"; then + dnl TODO: support --pch-dir! + KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) + dnl the below works (but the dir must exist), but it's + dnl useless for a whole package. + dnl The are precompiled headers for each source file, so when compiling + dnl from scratch, it doesn't make a difference, and they take up + dnl around ~5Mb _per_ sourcefile. + dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, + dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) + fi + dnl this flag controls inlining. by default KCC inlines in optimisation mode + dnl all implementations that are defined inside the class {} declaration. + dnl because of templates-compatibility with broken gcc compilers, this + dnl can cause excessive inlining. This flag limits it to a sane level + KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) + KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) + KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) + KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) + dnl Some source files are shared between multiple executables + dnl (or libraries) and some of those need template instantiations. + dnl In that case KCC needs to compile those sources with + dnl --one_instantiation_per_object. To make it easy for us we compile + dnl _all_ objects with that flag (--one_per is a shorthand). + KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) + fi + AC_SUBST(USE_EXCEPTIONS) + dnl obsolete macro - provided to keep things going + USE_RTTI= + AC_SUBST(USE_RTTI) + + case "$host" in + *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; + *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; + *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; + *-*-solaris*) + if test "$GXX" = yes; then + libstdcpp=`$CXX -print-file-name=libstdc++.so` + if test ! -f $libstdcpp; then + AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) + fi + fi + ;; + esac + + AC_VALIDIFY_CXXFLAGS + + AC_PROG_CXXCPP + + if test "$GCC" = yes; then + NOOPT_CFLAGS=-O0 + fi + KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) + + AC_ARG_ENABLE(coverage, + AC_HELP_STRING([--enable-coverage],[use gcc coverage testing]), [ + if test "$am_cv_CC_dependencies_compiler_type" = "gcc3"; then + ac_coverage_compiler="-fprofile-arcs -ftest-coverage" + ac_coverage_linker="-lgcc" + elif test "$am_cv_CC_dependencies_compiler_type" = "gcc"; then + ac_coverage_compiler="-fprofile-arcs -ftest-coverage" + ac_coverage_linker="" + else + AC_MSG_ERROR([coverage with your compiler is not supported]) + fi + CFLAGS="$CFLAGS $ac_coverage_compiler" + CXXFLAGS="$CXXFLAGS $ac_coverage_compiler" + LDFLAGS="$LDFLAGS $ac_coverage_linker" + ]) + + AC_SUBST(NOOPT_CXXFLAGS) + AC_SUBST(NOOPT_CFLAGS) + AC_SUBST(ENABLE_PERMISSIVE_FLAG) + + KDE_CHECK_NEW_LDFLAGS + KDE_CHECK_FINAL + KDE_CHECK_CLOSURE + KDE_CHECK_NMCHECK + + ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) +]) + +AC_DEFUN([KDE_CHECK_VISIBILITY_GCC_BUG], + [ + AC_CACHE_CHECK([for gcc -fvisibility-inlines-hidden bug], kde_cv_val_gcc_visibility_bug, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + safe_CXXFLAGS=$CXXFLAGS + safe_LDFLAGS=$LDFLAGS + CXXFLAGS="$CXXFLAGS -fPIC -fvisibility-inlines-hidden -O0" + LDFLAGS="$LDFLAGS -shared -fPIC" + + AC_TRY_LINK( + [ + /* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=19664 */ + #include + int some_function( void ) __attribute__ ((visibility("default"))); + int some_function( void ) + { + std::string s("blafasel"); + return 0; + } + ], [/* elvis is alive */], + kde_cv_val_gcc_visibility_bug=no, kde_cv_val_gcc_visibility_bug=yes) + + CXXFLAGS=$safe_CXXFLAGS + LDFLAGS=$safe_LDFLAGS + AC_LANG_RESTORE + ] + ) + + if test x$kde_cv_val_gcc_visibility_bug = xno; then + CXXFLAGS="$CXXFLAGS -fvisibility-inlines-hidden" + fi + ] +) + +AC_DEFUN([KDE_CHECK_AND_ADD_HIDDEN_VISIBILITY], +[ + if test "$GXX" = "yes"; then + KDE_CHECK_COMPILER_FLAG(fvisibility=hidden, + [ + CXXFLAGS="$CXXFLAGS -fvisibility=hidden" + KDE_CHECK_VISIBILITY_GCC_BUG + + HAVE_GCC_VISIBILITY=1 + AC_DEFINE_UNQUOTED(__KDE_HAVE_GCC_VISIBILITY, "$HAVE_GCC_VISIBILITY", [define to 1 if -fvisibility is supported]) + ]) + fi +]) + +AC_DEFUN([KDE_ENABLE_HIDDEN_VISIBILITY], +[ + AC_REQUIRE([KDE_CHECK_AND_ADD_HIDDEN_VISIBILITY]) +]) + +AC_DEFUN([KDE_ADD_DEPENDENCIES], +[ + [A]M_DEPENDENCIES(CC) + [A]M_DEPENDENCIES(CXX) +]) + +dnl just a wrapper to clean up configure.in +AC_DEFUN([KDE_PROG_LIBTOOL], +[ +AC_REQUIRE([AC_CHECK_COMPILERS]) +AC_REQUIRE([AC_ENABLE_SHARED]) +AC_REQUIRE([AC_ENABLE_STATIC]) + +AC_REQUIRE([AC_LIBTOOL_DLOPEN]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_OBJEXT +AC_EXEEXT + +AM_PROG_LIBTOOL +AC_LIBTOOL_CXX + +LIBTOOL_SHELL="/bin/sh ./libtool" +# LIBTOOL="$LIBTOOL --silent" +KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" +AC_SUBST(KDE_PLUGIN) + +# This hack ensures that libtool creates shared libs for kunittest plugins. By default check_LTLIBRARIES makes static libs. +KDE_CHECK_PLUGIN="\$(KDE_PLUGIN) -rpath \$(libdir)" +AC_SUBST(KDE_CHECK_PLUGIN) + +# we patch configure quite some so we better keep that consistent for incremental runs +AC_SUBST(AUTOCONF,'$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure') +]) + +AC_DEFUN([KDE_CHECK_LIB64], +[ + kdelibsuff="$kde_libs_suffix" + if test -z "$kdelibsuff"; then + kdelibsuff=no + fi + AC_ARG_ENABLE(libsuffix, + AC_HELP_STRING([--enable-libsuffix], + [/lib directory suffix (64,32,none[=default])]), + kdelibsuff=$enableval) + # TODO: add an auto case that compiles a little C app to check + # where the glibc is + if test "$kdelibsuff" = "no"; then + kdelibsuff= + fi + if test -z "$kdelibsuff"; then + AC_MSG_RESULT([not using lib directory suffix]) + AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) + else + if test "$libdir" = '${exec_prefix}/lib'; then + libdir="$libdir${kdelibsuff}" + AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms + fi + AC_DEFINE_UNQUOTED(KDELIBSUFF, ["${kdelibsuff}"], Suffix for lib directories) + AC_MSG_RESULT([using lib directory suffix $kdelibsuff]) + fi +]) + +AC_DEFUN([KDE_CHECK_TYPES], +[ AC_CHECK_SIZEOF(int, 4)dnl + AC_CHECK_SIZEOF(short)dnl + AC_CHECK_SIZEOF(long, 4)dnl + AC_CHECK_SIZEOF(char *, 4)dnl +])dnl + +dnl Not used - kept for compat only? +AC_DEFUN([KDE_DO_IT_ALL], +[ +AC_CANONICAL_SYSTEM +AC_ARG_PROGRAM +AM_INIT_AUTOMAKE($1, $2) +AM_DISABLE_LIBRARIES +AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) +AC_CHECK_COMPILERS +KDE_PROG_LIBTOOL +AM_KDE_WITH_NLS +AC_PATH_KDE +]) + +AC_DEFUN([AC_CHECK_RPATH], +[ +AC_MSG_CHECKING(for rpath) +AC_ARG_ENABLE(rpath, + AC_HELP_STRING([--disable-rpath],[do not use the rpath feature of ld]), + USE_RPATH=$enableval, USE_RPATH=yes) + +if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then + + KDE_RPATH="-R \$(libdir)" + + if test "$kde_libraries" != "$libdir"; then + KDE_RPATH="$KDE_RPATH -R \$(kde_libraries)" + fi + + if test -n "$qt_libraries"; then + KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" + fi + dnl $x_libraries is set to /usr/lib in case + if test -n "$X_LDFLAGS"; then + X_RPATH="-R \$(x_libraries)" + KDE_RPATH="$KDE_RPATH $X_RPATH" + fi + if test -n "$KDE_EXTRA_RPATH"; then + KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" + fi +fi +AC_SUBST(KDE_EXTRA_RPATH) +AC_SUBST(KDE_RPATH) +AC_SUBST(X_RPATH) +AC_MSG_RESULT($USE_RPATH) +]) + +dnl Check for the type of the third argument of getsockname +AC_DEFUN([AC_CHECK_SOCKLEN_T], +[ + AC_MSG_CHECKING(for socklen_t) + AC_CACHE_VAL(kde_cv_socklen_t, + [ + AC_LANG_PUSH(C++) + kde_cv_socklen_t=no + AC_TRY_COMPILE([ + #include + #include + ], + [ + socklen_t len; + getpeername(0,0,&len); + ], + [ + kde_cv_socklen_t=yes + kde_cv_socklen_t_equiv=socklen_t + ]) + AC_LANG_POP(C++) + ]) + AC_MSG_RESULT($kde_cv_socklen_t) + if test $kde_cv_socklen_t = no; then + AC_MSG_CHECKING([for socklen_t equivalent for socket functions]) + AC_CACHE_VAL(kde_cv_socklen_t_equiv, + [ + kde_cv_socklen_t_equiv=int + AC_LANG_PUSH(C++) + for t in int size_t unsigned long "unsigned long"; do + AC_TRY_COMPILE([ + #include + #include + ], + [ + $t len; + getpeername(0,0,&len); + ], + [ + kde_cv_socklen_t_equiv="$t" + break + ]) + done + AC_LANG_POP(C++) + ]) + AC_MSG_RESULT($kde_cv_socklen_t_equiv) + fi + AC_DEFINE_UNQUOTED(kde_socklen_t, $kde_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined]) + AC_DEFINE_UNQUOTED(ksize_t, $kde_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined (deprecated, use kde_socklen_t)]) +]) + +dnl This is a merge of some macros out of the gettext aclocal.m4 +dnl since we don't need anything, I took the things we need +dnl the copyright for them is: +dnl > +dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. +dnl This Makefile.in is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. +dnl > +dnl for this file it is relicensed under LGPL + +AC_DEFUN([AM_KDE_WITH_NLS], + [ + dnl If we use NLS figure out what method + + AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, + [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + + if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then + AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) + GMSGFMT=":" + fi + MSGFMT=$GMSGFMT + AC_SUBST(GMSGFMT) + AC_SUBST(MSGFMT) + + AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) + + dnl Test whether we really found GNU xgettext. + if test "$XGETTEXT" != ":"; then + dnl If it is no GNU xgettext we define it as : so that the + dnl Makefiles still can work. + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else + AC_MSG_RESULT( + [found xgettext programs is not GNU xgettext; ignore it]) + XGETTEXT=":" + fi + fi + AC_SUBST(XGETTEXT) + + ]) + +# Search path for a program which passes the given test. +# Ulrich Drepper , 1996. + +# serial 1 +# Stephan Kulow: I appended a _KDE against name conflicts + +dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST_KDE], +[# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL(ac_cv_path_$1, +[case "[$]$1" in + /*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in ifelse([$5], , $PATH, [$5]); do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test -n "[$]$1"; then + AC_MSG_RESULT([$]$1) +else + AC_MSG_RESULT(no) +fi +AC_SUBST($1)dnl +]) + + +# Check whether LC_MESSAGES is available in . +# Ulrich Drepper , 1995. + +# serial 1 + +AC_DEFUN([AM_LC_MESSAGES], + [if test $ac_cv_header_locale_h = yes; then + AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, + [AC_TRY_LINK([#include ], [return LC_MESSAGES], + am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) + if test $am_cv_val_LC_MESSAGES = yes; then + AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) + fi + fi]) + +dnl From Jim Meyering. +dnl FIXME: migrate into libit. + +AC_DEFUN([AM_FUNC_OBSTACK], +[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, + [AC_TRY_LINK([#include "obstack.h"], + [struct obstack *mem;obstack_free(mem,(char *) 0)], + am_cv_func_obstack=yes, + am_cv_func_obstack=no)]) + if test $am_cv_func_obstack = yes; then + AC_DEFINE(HAVE_OBSTACK) + else + LIBOBJS="$LIBOBJS obstack.o" + fi +]) + +dnl From Jim Meyering. Use this if you use the GNU error.[ch]. +dnl FIXME: Migrate into libit + +AC_DEFUN([AM_FUNC_ERROR_AT_LINE], +[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, + [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], + am_cv_lib_error_at_line=yes, + am_cv_lib_error_at_line=no)]) + if test $am_cv_lib_error_at_line = no; then + LIBOBJS="$LIBOBJS error.o" + fi + AC_SUBST(LIBOBJS)dnl +]) + +# Macro to add for using GNU gettext. +# Ulrich Drepper , 1995. + +# serial 1 +# Stephan Kulow: I put a KDE in it to avoid name conflicts + +AC_DEFUN([AM_KDE_GNU_GETTEXT], + [AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_RANLIB])dnl + AC_REQUIRE([AC_HEADER_STDC])dnl + AC_REQUIRE([AC_TYPE_OFF_T])dnl + AC_REQUIRE([AC_TYPE_SIZE_T])dnl + AC_REQUIRE([AC_FUNC_ALLOCA])dnl + AC_REQUIRE([AC_FUNC_MMAP])dnl + AC_REQUIRE([AM_KDE_WITH_NLS])dnl + AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) + AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ +__argz_count __argz_stringify __argz_next]) + + AC_MSG_CHECKING(for stpcpy) + AC_CACHE_VAL(kde_cv_func_stpcpy, + [ + kde_safe_cxxflags=$CXXFLAGS + CXXFLAGS="-Werror" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_COMPILE([ + #include + ], + [ + char buffer[200]; + stpcpy(buffer, buffer); + ], + kde_cv_func_stpcpy=yes, + kde_cv_func_stpcpy=no) + AC_LANG_RESTORE + CXXFLAGS=$kde_safe_cxxflags + ]) + AC_MSG_RESULT($kde_cv_func_stpcpy) + if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then + AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) + fi + + AM_LC_MESSAGES + + if test "x$CATOBJEXT" != "x"; then + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else + AC_MSG_CHECKING(for catalogs to be installed) + NEW_LINGUAS= + for lang in ${LINGUAS=$ALL_LINGUAS}; do + case "$ALL_LINGUAS" in + *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; + esac + done + LINGUAS=$NEW_LINGUAS + AC_MSG_RESULT($LINGUAS) + fi + + dnl Construct list of names of catalog files to be constructed. + if test -n "$LINGUAS"; then + for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done + fi + fi + + ]) + +AC_DEFUN([AC_HAVE_XPM], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= + test -z "$XPM_INCLUDE" && XPM_INCLUDE= + + AC_ARG_WITH(xpm,AC_HELP_STRING([--without-xpm],[disable color pixmap XPM tests]), + xpm_test=$withval, xpm_test="yes") + if test "x$xpm_test" = xno; then + ac_cv_have_xpm=no + else + AC_MSG_CHECKING(for XPM) + AC_CACHE_VAL(ac_cv_have_xpm, + [ + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" + else + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" + fi + CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" + test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" + AC_TRY_LINK([#include ],[], + ac_cv_have_xpm="yes",ac_cv_have_xpm="no") + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + ])dnl + + if test "$ac_cv_have_xpm" = no; then + AC_MSG_RESULT(no) + XPM_LDFLAGS="" + XPMINC="" + $2 + else + AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) + if test "$XPM_LDFLAGS" = ""; then + XPMLIB='-lXpm $(LIB_X11)' + else + XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' + fi + if test "$XPM_INCLUDE" = ""; then + XPMINC="" + else + XPMINC="-I$XPM_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + AC_SUBST(XPMINC) + AC_SUBST(XPMLIB) +]) + +AC_DEFUN([AC_HAVE_DPMS], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= + test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= + DPMS_LIB= + + AC_ARG_WITH(dpms,AC_HELP_STRING([--without-dpms],[disable DPMS power saving]), + dpms_test=$withval, dpms_test="yes") + if test "x$dpms_test" = xno; then + ac_cv_have_dpms=no + else + AC_MSG_CHECKING(for DPMS) + dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. + dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". + AC_CACHE_VAL(ac_cv_have_dpms, + [ + if test "x$kde_use_qt_emb" = "xyes" || test "x$kde_use_qt_mac" = "xyes"; then + AC_MSG_RESULT(no) + ac_cv_have_dpms="no" + else + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + ac_save_libs="$LIBS" + LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AC_TRY_LINK([ + #include + #include + #include + #include + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + ac_cv_have_dpms="yes", [ + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" + LIBS="$LIBS -lXdpms" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AC_TRY_LINK([ + #include + #include + #include + #include + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + [ + ac_cv_have_dpms="-lXdpms" + ],ac_cv_have_dpms="no") + ]) + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + LIBS="$ac_save_libs" + fi + ])dnl + + if test "$ac_cv_have_dpms" = no; then + AC_MSG_RESULT(no) + DPMS_LDFLAGS="" + DPMSINC="" + $2 + else + AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) + if test "$ac_cv_have_dpms" = "-lXdpms"; then + DPMS_LIB="-lXdpms" + fi + if test "$DPMS_LDFLAGS" = ""; then + DPMSLIB="$DPMS_LIB "'$(LIB_X11)' + else + DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' + fi + if test "$DPMS_INCLUDE" = ""; then + DPMSINC="" + else + DPMSINC="-I$DPMS_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + ac_save_cflags="$CFLAGS" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AH_TEMPLATE(HAVE_DPMSCAPABLE_PROTO, + [Define if you have the DPMSCapable prototype in ]) + AC_CHECK_DECL(DPMSCapable, + AC_DEFINE(HAVE_DPMSCAPABLE_PROTO),, + [#include ]) + AH_TEMPLATE(HAVE_DPMSINFO_PROTO, + [Define if you have the DPMSInfo prototype in ]) + AC_CHECK_DECL(DPMSInfo, + AC_DEFINE(HAVE_DPMSINFO_PROTO),, + [#include ]) + CFLAGS="$ac_save_cflags" + AC_SUBST(DPMSINC) + AC_SUBST(DPMSLIB) +]) + +AC_DEFUN([AC_HAVE_GL], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$GL_LDFLAGS" && GL_LDFLAGS= + test -z "$GL_INCLUDE" && GL_INCLUDE= + + AC_ARG_WITH(gl,AC_HELP_STRING([--without-gl],[disable 3D GL modes]), + gl_test=$withval, gl_test="yes") + if test "x$kde_use_qt_emb" = "xyes"; then + # GL and Qt Embedded is a no-go for now. + ac_cv_have_gl=no + elif test "x$gl_test" = xno; then + ac_cv_have_gl=no + else + AC_MSG_CHECKING(for GL) + AC_CACHE_VAL(ac_cv_have_gl, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_ldflags=$LDFLAGS + ac_save_cxxflags=$CXXFLAGS + ac_save_libs=$LIBS + LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries" + LIBS="$LIBS -lGL -lGLU" + test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LIBS="$LIBS -lX11" + LIBS="$LIBS $LIB_XEXT -lm $LIBSOCKET" + CXXFLAGS="$CFLAGS $X_INCLUDES" + test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" + AC_TRY_LINK([#include +#include +], [], + ac_cv_have_gl="yes", ac_cv_have_gl="no") + AC_LANG_RESTORE + LDFLAGS=$ac_save_ldflags + CXXFLAGS=$ac_save_cxxflags + LIBS=$ac_save_libs + ])dnl + + if test "$ac_cv_have_gl" = "no"; then + AC_MSG_RESULT(no) + GL_LDFLAGS="" + GLINC="" + $2 + else + AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) + if test "$GL_LDFLAGS" = ""; then + GLLIB='-lGLU -lGL $(LIB_X11)' + else + GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' + fi + if test "$GL_INCLUDE" = ""; then + GLINC="" + else + GLINC="-I$GL_INCLUDE" + fi + AC_MSG_RESULT($ac_cv_have_gl) + $1 + fi + fi + AC_SUBST(GLINC) + AC_SUBST(GLLIB) +]) + + + dnl shadow password and PAM magic - maintained by ossi@kde.org + +AC_DEFUN([KDE_PAM], [ + AC_REQUIRE([KDE_CHECK_LIBDL]) + + want_pam= + AC_ARG_WITH(pam, + AC_HELP_STRING([--with-pam[=ARG]],[enable support for PAM: ARG=[yes|no|service name]]), + [ if test "x$withval" = "xyes"; then + want_pam=yes + pam_service=kde + elif test "x$withval" = "xno"; then + want_pam=no + else + want_pam=yes + pam_service=$withval + fi + ], [ pam_service=kde ]) + + use_pam= + PAMLIBS= + if test "x$want_pam" != xno; then + AC_CHECK_LIB(pam, pam_start, [ + AC_CHECK_HEADER(security/pam_appl.h, + [ pam_header=security/pam_appl.h ], + [ AC_CHECK_HEADER(pam/pam_appl.h, + [ pam_header=pam/pam_appl.h ], + [ + AC_MSG_WARN([PAM detected, but no headers found! +Make sure you have the necessary development packages installed.]) + ] + ) + ] + ) + ], , $LIBDL) + if test -z "$pam_header"; then + if test "x$want_pam" = xyes; then + AC_MSG_ERROR([--with-pam was specified, but cannot compile with PAM!]) + fi + else + AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) + PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" + use_pam=yes + + dnl darwin claims to be something special + if test "$pam_header" = "pam/pam_appl.h"; then + AC_DEFINE(HAVE_PAM_PAM_APPL_H, 1, [Define if your PAM headers are in pam/ instead of security/]) + fi + + dnl test whether struct pam_message is const (Linux) or not (Sun) + AC_MSG_CHECKING(for const pam_message) + AC_EGREP_HEADER([struct pam_message], $pam_header, + [ AC_EGREP_HEADER([const struct pam_message], $pam_header, + [AC_MSG_RESULT([const: Linux-type PAM])], + [AC_MSG_RESULT([nonconst: Sun-type PAM]) + AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] + )], + [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) + fi + fi + + AC_SUBST(PAMLIBS) +]) + +dnl DEF_PAM_SERVICE(arg name, full name, define name) +AC_DEFUN([DEF_PAM_SERVICE], [ + AC_ARG_WITH($1-pam, + AC_HELP_STRING([--with-$1-pam=[val]],[override PAM service from --with-pam for $2]), + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE=$withval + else + AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. +You may want to enforce it by using --with-pam.]) + fi + ], + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE="$pam_service" + fi + ]) + if test -n "$$3_PAM_SERVICE"; then + AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) + AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) + fi + AC_SUBST($3_PAM_SERVICE) +]) + +AC_DEFUN([KDE_SHADOWPASSWD], [ + AC_REQUIRE([KDE_PAM]) + + AC_CHECK_LIB(shadow, getspent, + [ LIBSHADOW="-lshadow" + ac_use_shadow=yes + ], + [ dnl for UnixWare + AC_CHECK_LIB(gen, getspent, + [ LIBGEN="-lgen" + ac_use_shadow=yes + ], + [ AC_CHECK_FUNC(getspent, + [ ac_use_shadow=yes ], + [ ac_use_shadow=no ]) + ]) + ]) + AC_SUBST(LIBSHADOW) + AC_SUBST(LIBGEN) + + AC_MSG_CHECKING([for shadow passwords]) + + AC_ARG_WITH(shadow, + AC_HELP_STRING([--with-shadow],[If you want shadow password support]), + [ if test "x$withval" != "xno"; then + use_shadow=yes + else + use_shadow=no + fi + ], [ + use_shadow="$ac_use_shadow" + ]) + + if test "x$use_shadow" = xyes; then + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) + else + AC_MSG_RESULT(no) + LIBSHADOW= + LIBGEN= + fi + + dnl finally make the relevant binaries setuid root, if we have shadow passwds. + dnl this still applies, if we could use it indirectly through pam. + if test "x$use_shadow" = xyes || + ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then + case $host in + *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) + SETUIDFLAGS="-m 4755 -o root";; + *) + SETUIDFLAGS="-m 4755";; + esac + fi + AC_SUBST(SETUIDFLAGS) + +]) + +AC_DEFUN([KDE_PASSWDLIBS], [ + AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT + AC_REQUIRE([KDE_PAM]) + AC_REQUIRE([KDE_SHADOWPASSWD]) + + if test "x$use_pam" = "xyes"; then + PASSWDLIBS="$PAMLIBS" + else + PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" + fi + + dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but + dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires + dnl root to read, so kcheckpass needs to be root (even when using pam, since pam + dnl may need to read /etc/master.passwd). + case $host in + *-*-freebsd*) + SETUIDFLAGS="-m 4755 -o root" + ;; + *) + ;; + esac + + AC_SUBST(PASSWDLIBS) +]) + +AC_DEFUN([KDE_CHECK_LIBDL], +[ +AC_CHECK_LIB(dl, dlopen, [ +LIBDL="-ldl" +ac_cv_have_dlfcn=yes +]) + +AC_CHECK_LIB(dld, shl_unload, [ +LIBDL="-ldld" +ac_cv_have_shload=yes +]) + +AC_SUBST(LIBDL) +]) + +AC_DEFUN([KDE_CHECK_DLOPEN], +[ +KDE_CHECK_LIBDL +AC_CHECK_HEADERS(dlfcn.h dl.h) +if test "$ac_cv_header_dlfcn_h" = "no"; then + ac_cv_have_dlfcn=no +fi + +if test "$ac_cv_header_dl_h" = "no"; then + ac_cv_have_shload=no +fi + +dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE +dnl (MM) +AC_ARG_ENABLE(dlopen, +AC_HELP_STRING([--disable-dlopen],[link statically [default=no]]), +enable_dlopen=$enableval, +enable_dlopen=yes) + +# override the user's opinion, if we know it better ;) +if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then + enable_dlopen=no +fi + +if test "$ac_cv_have_dlfcn" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) +fi + +if test "$ac_cv_have_shload" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) +fi + +if test "$enable_dlopen" = no ; then + test -n "$1" && eval $1 +else + test -n "$2" && eval $2 +fi + +]) + +AC_DEFUN([KDE_CHECK_DYNAMIC_LOADING], +[ +KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) +KDE_PROG_LIBTOOL +AC_MSG_CHECKING([dynamic loading]) +eval "`egrep '^build_libtool_libs=' libtool`" +if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then + dynamic_loading=yes + AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) +else + dynamic_loading=no +fi +AC_MSG_RESULT($dynamic_loading) +if test "$dynamic_loading" = "yes"; then + $1 +else + $2 +fi +]) + +AC_DEFUN([KDE_ADD_INCLUDES], +[ +if test -z "$1"; then + test_include="Pix.h" +else + test_include="$1" +fi + +AC_MSG_CHECKING([for libg++ ($test_include)]) + +AC_CACHE_VAL(kde_cv_libgpp_includes, +[ +kde_cv_libgpp_includes=no + + for ac_dir in \ + \ + /usr/include/g++ \ + /usr/include \ + /usr/unsupported/include \ + /opt/include \ + $extra_include \ + ; \ + do + if test -r "$ac_dir/$test_include"; then + kde_cv_libgpp_includes=$ac_dir + break + fi + done +]) + +AC_MSG_RESULT($kde_cv_libgpp_includes) +if test "$kde_cv_libgpp_includes" != "no"; then + all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" +fi +]) +]) + +AC_DEFUN([KDE_CHECK_LIBPTHREAD], +[ + dnl This code is here specifically to handle the + dnl various flavors of threading library on FreeBSD + dnl 4-, 5-, and 6-, and the (weird) rules around it. + dnl There may be an environment PTHREAD_LIBS that + dnl specifies what to use; otherwise, search for it. + dnl -pthread is special cased and unsets LIBPTHREAD + dnl below if found. + LIBPTHREAD="" + + if test -n "$PTHREAD_LIBS"; then + if test "x$PTHREAD_LIBS" = "x-pthread" ; then + LIBPTHREAD="PTHREAD" + else + PTHREAD_LIBS_save="$PTHREAD_LIBS" + PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'` + AC_MSG_CHECKING([for pthread_create in $PTHREAD_LIBS]) + KDE_CHECK_LIB($PTHREAD_LIBS, pthread_create, [ + LIBPTHREAD="$PTHREAD_LIBS_save"]) + PTHREAD_LIBS="$PTHREAD_LIBS_save" + fi + fi + + dnl Is this test really needed, in the face of the Tru64 test below? + if test -z "$LIBPTHREAD"; then + AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"]) + fi + + dnl This is a special Tru64 check, see BR 76171 issue #18. + if test -z "$LIBPTHREAD" ; then + AC_MSG_CHECKING([for pthread_create in -lpthread]) + kde_safe_libs=$LIBS + LIBS="$LIBS -lpthread" + AC_TRY_LINK([#include ],[(void)pthread_create(0,0,0,0);],[ + AC_MSG_RESULT(yes) + LIBPTHREAD="-lpthread"],[ + AC_MSG_RESULT(no)]) + LIBS=$kde_safe_libs + fi + + dnl Un-special-case for FreeBSD. + if test "x$LIBPTHREAD" = "xPTHREAD" ; then + LIBPTHREAD="" + fi + + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_PTHREAD_OPTION], +[ + USE_THREADS="" + if test -z "$LIBPTHREAD"; then + KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-D_THREAD_SAFE -pthread"]) + fi + + AH_VERBATIM(__svr_define, [ +#if defined(__SVR4) && !defined(__svr4__) +#define __svr4__ 1 +#endif +]) + case $host_os in + solaris*) + KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) + CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" + ;; + freebsd*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS" + ;; + aix*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" + LIBPTHREAD="$LIBPTHREAD -lc_r" + ;; + linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" + if test "$CXX" = "KCC"; then + CXXFLAGS="$CXXFLAGS --thread_safe" + NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" + fi + ;; + *) + ;; + esac + AC_SUBST(USE_THREADS) + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_THREADING], +[ + AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) + AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) + dnl default is yes if libpthread is found and no if no libpthread is available + if test -z "$LIBPTHREAD"; then + if test -z "$USE_THREADS"; then + kde_check_threading_default=no + else + kde_check_threading_default=yes + fi + else + kde_check_threading_default=yes + fi + AC_ARG_ENABLE(threading,AC_HELP_STRING([--disable-threading],[disables threading even if libpthread found]), + kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) + if test "x$kde_use_threading" = "xyes"; then + AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) + fi +]) + +AC_DEFUN([KDE_TRY_LINK_PYTHON], +[ +if test "$kde_python_link_found" = no; then + +if test "$1" = normal; then + AC_MSG_CHECKING(if a Python application links) +else + AC_MSG_CHECKING(if Python depends on $2) +fi + +AC_CACHE_VAL(kde_cv_try_link_python_$1, +[ +kde_save_cflags="$CFLAGS" +CFLAGS="$CFLAGS $PYTHONINC" +kde_save_libs="$LIBS" +LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" +kde_save_ldflags="$LDFLAGS" +LDFLAGS="$LDFLAGS $PYTHONLIB" + +AC_TRY_LINK( +[ +#include +],[ + PySys_SetArgv(1, 0); +], + [kde_cv_try_link_python_$1=yes], + [kde_cv_try_link_python_$1=no] +) +CFLAGS="$kde_save_cflags" +LIBS="$kde_save_libs" +LDFLAGS="$kde_save_ldflags" +]) + +if test "$kde_cv_try_link_python_$1" = "yes"; then + AC_MSG_RESULT(yes) + kde_python_link_found=yes + if test ! "$1" = normal; then + LIBPYTHON="$LIBPYTHON $2" + fi + $3 +else + AC_MSG_RESULT(no) + $4 +fi + +fi + +]) + +AC_DEFUN([KDE_CHECK_PYTHON_DIR], +[ +AC_MSG_CHECKING([for Python directory]) + +AC_CACHE_VAL(kde_cv_pythondir, +[ + if test -z "$PYTHONDIR"; then + kde_cv_pythondir=/usr/local + else + kde_cv_pythondir="$PYTHONDIR" + fi +]) + +AC_ARG_WITH(pythondir, +AC_HELP_STRING([--with-pythondir=pythondir],[use python installed in pythondir]), +[ + ac_python_dir=$withval +], ac_python_dir=$kde_cv_pythondir +) + +AC_MSG_RESULT($ac_python_dir) +]) + +AC_DEFUN([KDE_CHECK_PYTHON_INTERN], +[ +AC_REQUIRE([KDE_CHECK_LIBDL]) +AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) +AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) + +if test -z "$1"; then + version="1.5" +else + version="$1" +fi + +AC_MSG_CHECKING([for Python$version]) + +python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" +AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) +if test ! -r $python_incdir/Python.h; then + AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) + python_incdir=$python_incdir/python$version + if test ! -r $python_incdir/Python.h; then + python_incdir=no + fi +fi + +PYTHONINC=-I$python_incdir + +python_libdirs="$ac_python_dir/lib$kdelibsuff /usr/lib$kdelibsuff /usr/local /usr/lib$kdelibsuff $kde_extra_libs" +AC_FIND_FILE(libpython$version.so, $python_libdirs, python_libdir) +if test ! -r $python_libdir/libpython$version.so; then + AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) + if test ! -r $python_libdir/libpython$version.a; then + AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) + python_libdir=$python_libdir/python$version/config + if test ! -r $python_libdir/libpython$version.a; then + python_libdir=no + fi + fi +fi + +PYTHONLIB=-L$python_libdir +kde_orig_LIBPYTHON=$LIBPYTHON +if test -z "$LIBPYTHON"; then + LIBPYTHON=-lpython$version +fi + +AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) +python_moddir=$python_moddir/python$version +if test ! -r $python_moddir/copy.py; then + python_moddir=no +fi + +PYTHONMODDIR=$python_moddir + +AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) + +if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then + LIBPYTHON=$kde_orig_LIBPYTHON + test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" + test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" + $2 +else + dnl Note: this test is very weak + kde_python_link_found=no + KDE_TRY_LINK_PYTHON(normal) + KDE_TRY_LINK_PYTHON(m, -lm) + KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) + KDE_TRY_LINK_PYTHON(tcl, -ltcl) + KDE_TRY_LINK_PYTHON(db2, -ldb2) + KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) + KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], + [AC_MSG_WARN([it seems, Python depends on another library. + Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this + and contact the authors to let them know about this problem]) + ]) + + LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" + AC_SUBST(PYTHONINC) + AC_SUBST(PYTHONLIB) + AC_SUBST(LIBPYTHON) + AC_SUBST(PYTHONMODDIR) + AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) +fi + +]) + + +AC_DEFUN([KDE_CHECK_PYTHON], +[ + KDE_CHECK_PYTHON_INTERN("2.4", + [KDE_CHECK_PYTHON_INTERN("2.3", + [KDE_CHECK_PYTHON_INTERN("2.2", + [KDE_CHECK_PYTHON_INTERN("2.1", + [KDE_CHECK_PYTHON_INTERN("2.0", + [KDE_CHECK_PYTHON_INTERN($1, $2) ]) + ]) + ]) + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_STL], +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" + + AC_MSG_CHECKING([if C++ programs can be compiled]) + AC_CACHE_VAL(kde_cv_stl_works, + [ + AC_TRY_COMPILE([ +#include +using namespace std; +],[ + string astring="Hallo Welt."; + astring.erase(0, 6); // now astring is "Welt" + return 0; +], kde_cv_stl_works=yes, + kde_cv_stl_works=no) +]) + + AC_MSG_RESULT($kde_cv_stl_works) + + if test "$kde_cv_stl_works" = "yes"; then + # back compatible + AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) + else + AC_MSG_ERROR([Your Installation isn't able to compile simple C++ programs. +Check config.log for details - if you're using a Linux distribution you might miss +a package named similar to libstdc++-dev.]) + fi + + CXXFLAGS="$ac_save_CXXFLAGS" + AC_LANG_RESTORE +]) + +AC_DEFUN([AC_FIND_QIMGIO], + [AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for qimgio]) +AC_CACHE_VAL(ac_cv_lib_qimgio, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +ac_save_CXXFLAGS="$CXXFLAGS" +LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +AC_TRY_RUN(dnl +[ +#include +#include +int main() { + QString t = "hallo"; + t.fill('t'); + qInitImageIO(); +} +], + ac_cv_lib_qimgio=yes, + ac_cv_lib_qimgio=no, + ac_cv_lib_qimgio=no) +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then + LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) + AC_SUBST(LIBQIMGIO) +else + AC_MSG_RESULT(not found) +fi +]) + +AC_DEFUN([AM_DISABLE_LIBRARIES], +[ + AC_PROVIDE([AM_ENABLE_STATIC]) + AC_PROVIDE([AM_ENABLE_SHARED]) + enable_static=no + enable_shared=yes +]) + + +AC_DEFUN([AC_CHECK_UTMP_FILE], +[ + AC_MSG_CHECKING([for utmp file]) + + AC_CACHE_VAL(kde_cv_utmp_file, + [ + kde_cv_utmp_file=no + + for ac_file in \ + \ + /var/run/utmp \ + /var/adm/utmp \ + /etc/utmp \ + ; \ + do + if test -r "$ac_file"; then + kde_cv_utmp_file=$ac_file + break + fi + done + ]) + + if test "$kde_cv_utmp_file" != "no"; then + AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) + $1 + AC_MSG_RESULT($kde_cv_utmp_file) + else + $2 + AC_MSG_RESULT([non found]) + fi +]) + + +AC_DEFUN([KDE_CREATE_SUBDIRSLIST], +[ + +DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" +TOPSUBDIRS="" + +if test ! -s $srcdir/subdirs; then + dnl Note: Makefile.common creates subdirs, so this is just a fallback + files=`cd $srcdir && ls -1` + dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` + for i in $dirs; do + echo $i >> $srcdir/subdirs + done +fi + +ac_topsubdirs= +if test -s $srcdir/inst-apps; then + ac_topsubdirs="`cat $srcdir/inst-apps`" +elif test -s $srcdir/subdirs; then + ac_topsubdirs="`cat $srcdir/subdirs`" +fi + +for i in $ac_topsubdirs; do + AC_MSG_CHECKING([if $i should be compiled]) + if test -d $srcdir/$i; then + install_it="yes" + for j in $DO_NOT_COMPILE; do + if test $i = $j; then + install_it="no" + fi + done + else + install_it="no" + fi + AC_MSG_RESULT($install_it) + vari=`echo $i | sed -e 's,[[-+.@]],_,g'` + if test $install_it = "yes"; then + TOPSUBDIRS="$TOPSUBDIRS $i" + eval "$vari""_SUBDIR_included=yes" + else + eval "$vari""_SUBDIR_included=no" + fi +done + +AC_SUBST(TOPSUBDIRS) +]) + +AC_DEFUN([KDE_CHECK_NAMESPACES], +[ +AC_MSG_CHECKING(whether C++ compiler supports namespaces) +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +AC_TRY_COMPILE([ +], +[ +namespace Foo { + extern int i; + namespace Bar { + extern int i; + } +} + +int Foo::i = 0; +int Foo::Bar::i = 1; +],[ + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_NAMESPACES) +], [ +AC_MSG_RESULT(no) +]) +AC_LANG_RESTORE +]) + +dnl ------------------------------------------------------------------------ +dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_S_ISSOCK], +[ +AC_MSG_CHECKING(for S_ISSOCK) +AC_CACHE_VAL(ac_cv_have_s_issock, +[ +AC_TRY_LINK( +[ +#include +], +[ +struct stat buff; +int b = S_ISSOCK( buff.st_mode ); +], +ac_cv_have_s_issock=yes, +ac_cv_have_s_issock=no) +]) +AC_MSG_RESULT($ac_cv_have_s_issock) +if test "$ac_cv_have_s_issock" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) +fi + +AH_VERBATIM(_ISSOCK, +[ +#ifndef HAVE_S_ISSOCK +#define HAVE_S_ISSOCK +#define S_ISSOCK(mode) (1==0) +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_KDEMAXPATHLEN], +[ +AC_MSG_CHECKING(for MAXPATHLEN) +AC_CACHE_VAL(ac_cv_maxpathlen, +[ +cat > conftest.$ac_ext < +#endif +#include +#include +#ifndef MAXPATHLEN +#define MAXPATHLEN 1024 +#endif + +KDE_HELLO MAXPATHLEN + +EOF + +ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" + +if AC_TRY_EVAL(ac_try) && test -s conftest.out; then + ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` +else + ac_cv_maxpathlen=1024 +fi + +rm conftest.* + +]) +AC_MSG_RESULT($ac_cv_maxpathlen) +AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) +]) + +AC_DEFUN([KDE_CHECK_HEADER], +[ + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_CHECK_HEADER([$1], [$2], [$3], [$4]) + AC_LANG_RESTORE + CPPFLAGS=$kde_safe_cppflags +]) + +AC_DEFUN([KDE_CHECK_HEADERS], +[ + AH_CHECK_HEADERS([$1]) + AC_LANG_SAVE + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_CPLUSPLUS + AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) + CPPFLAGS=$kde_safe_cppflags + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_FAST_CONFIGURE], +[ + dnl makes configure fast (needs perl) + AC_ARG_ENABLE(fast-perl, AC_HELP_STRING([--disable-fast-perl],[disable fast Makefile generation (needs perl)]), + with_fast_perl=$enableval, with_fast_perl=yes) +]) + +AC_DEFUN([KDE_CONF_FILES], +[ + val= + if test -f $srcdir/configure.files ; then + val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` + fi + CONF_FILES= + if test -n "$val" ; then + for i in $val ; do + CONF_FILES="$CONF_FILES $i" + done + fi + AC_SUBST(CONF_FILES) +])dnl + +dnl This sets the prefix, for arts and kdelibs +dnl Do NOT use in any other module. +dnl It only looks at --prefix, KDEDIR and falls back to /usr/local/kde +AC_DEFUN([KDE_SET_PREFIX_CORE], +[ + unset CDPATH + dnl make $KDEDIR the default for the installation + AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) + + if test "x$prefix" = "xNONE"; then + prefix=$ac_default_prefix + ac_configure_args="$ac_configure_args --prefix=$prefix" + fi + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + kde_libs_prefix='$(prefix)' + kde_libs_htmldir='$(kde_htmldir)' + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + + +AC_DEFUN([KDE_SET_PREFIX], +[ + unset CDPATH + dnl We can't give real code to that macro, only a value. + dnl It only matters for --help, since we set the prefix in this function anyway. + AC_PREFIX_DEFAULT(${KDEDIR:-the kde prefix}) + + KDE_SET_DEFAULT_BINDIRS + if test "x$prefix" = "xNONE"; then + dnl no prefix given: look for kde-config in the PATH and deduce the prefix from it + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + else + dnl prefix given: look for kde-config, preferrably in prefix, otherwise in PATH + kde_save_PATH="$PATH" + PATH="$exec_prefix/bin:$prefix/bin:$PATH" + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + PATH="$kde_save_PATH" + fi + + kde_libs_prefix=`$KDECONFIG --prefix` + if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then + AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. + This means it has been moved since you installed it. + This won't work. Please recompile kdelibs for the new prefix. + ]) + fi + kde_libs_htmldir=`$KDECONFIG --install html --expandvars` + kde_libs_suffix=`$KDECONFIG --libsuffix` + + AC_MSG_CHECKING([where to install]) + if test "x$prefix" = "xNONE"; then + prefix=$kde_libs_prefix + AC_MSG_RESULT([$prefix (as returned by kde-config)]) + else + dnl --prefix was given. Compare prefixes and warn (in configure.in.bot.end) if different + given_prefix=$prefix + AC_MSG_RESULT([$prefix (as requested)]) + fi + + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + given_prefix=`echo "$given_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + AC_SUBST(KDECONFIG) + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + +pushdef([AC_PROG_INSTALL], +[ + dnl our own version, testing for a -p flag + popdef([AC_PROG_INSTALL]) + dnl as AC_PROG_INSTALL works as it works we first have + dnl to save if the user didn't specify INSTALL, as the + dnl autoconf one overwrites INSTALL and we have no chance to find + dnl out afterwards + test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL + test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM + test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT + AC_PROG_INSTALL + + if test -z "$kde_save_INSTALL_given" ; then + # OK, user hasn't given any INSTALL, autoconf found one for us + # now we test, if it supports the -p flag + AC_MSG_CHECKING(for -p flag to install) + rm -f confinst.$$.* > /dev/null 2>&1 + echo "Testtest" > confinst.$$.orig + ac_res=no + if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then + if test -f confinst.$$.new ; then + # OK, -p seems to do no harm to install + INSTALL="${INSTALL} -p" + ac_res=yes + fi + fi + rm -f confinst.$$.* + AC_MSG_RESULT($ac_res) + fi + dnl the following tries to resolve some signs and wonders coming up + dnl with different autoconf/automake versions + dnl e.g.: + dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s + dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) + dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s + dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has + dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the + dnl install-@DIR@PROGRAMS targets to explicitly use that flag + dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as + dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 + dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure + dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from + dnl automake (due to broken Makefile.am or whatever) to install programs, + dnl and so does not see the -s flag in automake > 1.4 + dnl to clean up that mess we: + dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG + dnl which cleans KDE's program with automake > 1.4; + dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems + dnl with automake<=1.4 + dnl note that dues to this sometimes two '-s' flags are used (if KDE + dnl properly uses install-@DIR@PROGRAMS, but I don't care + dnl + dnl And to all this comes, that I even can't write in comments variable + dnl names used by automake, because it is so stupid to think I wanted to + dnl _use_ them, therefor I have written A_M_... instead of AM_ + dnl hmm, I wanted to say something ... ahh yes: Arghhh. + + if test -z "$kde_save_INSTALL_PROGRAM_given" ; then + INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' + fi + if test -z "$kde_save_INSTALL_SCRIPT_given" ; then + INSTALL_SCRIPT='${INSTALL}' + fi +])dnl + +AC_DEFUN([KDE_LANG_CPLUSPLUS], +[AC_LANG_CPLUSPLUS +ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' +pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) +]) + +pushdef([AC_LANG_CPLUSPLUS], +[popdef([AC_LANG_CPLUSPLUS]) +KDE_LANG_CPLUSPLUS +]) + +AC_DEFUN([KDE_CHECK_LONG_LONG], +[ +AC_MSG_CHECKING(for long long) +AC_CACHE_VAL(kde_cv_c_long_long, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_LINK([], [ + long long foo = 0; + foo = foo+1; + ], + kde_cv_c_long_long=yes, kde_cv_c_long_long=no) + AC_LANG_RESTORE +]) +AC_MSG_RESULT($kde_cv_c_long_long) +if test "$kde_cv_c_long_long" = yes; then + AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) +fi +]) + +AC_DEFUN([KDE_CHECK_LIB], +[ + kde_save_LDFLAGS="$LDFLAGS" + dnl AC_CHECK_LIB modifies LIBS, so save it here + kde_save_LIBS="$LIBS" + LDFLAGS="$LDFLAGS $all_libraries" + case $host_os in + aix*) LDFLAGS="-brtl $LDFLAGS" + test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" + ;; + esac + AC_CHECK_LIB($1, $2, $3, $4, $5) + LDFLAGS="$kde_save_LDFLAGS" + LIBS="$kde_save_LIBS" +]) + +AC_DEFUN([KDE_JAVA_PREFIX], +[ + dir=`dirname "$1"` + base=`basename "$1"` + list=`ls -1 $dir 2> /dev/null` + for entry in $list; do + if test -d $dir/$entry/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/bin" + ;; + esac + elif test -d $dir/$entry/jre/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/jre/bin" + ;; + esac + fi + done +]) + +dnl KDE_CHEC_JAVA_DIR(onlyjre) +AC_DEFUN([KDE_CHECK_JAVA_DIR], +[ + +AC_ARG_WITH(java, +AC_HELP_STRING([--with-java=javadir],[use java installed in javadir, --without-java disables]), +[ ac_java_dir=$withval +], ac_java_dir="" +) + +AC_MSG_CHECKING([for Java]) + +dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH +if test "x$ac_java_dir" = "xno"; then + kde_java_bindir=no + kde_java_includedir=no + kde_java_libjvmdir=no + kde_java_libgcjdir=no + kde_java_libhpidir=no +else + if test "x$ac_java_dir" = "x"; then + + + dnl No option set -> collect list of candidate paths + if test -n "$JAVA_HOME"; then + KDE_JAVA_PREFIX($JAVA_HOME) + fi + KDE_JAVA_PREFIX(/usr/j2se) + KDE_JAVA_PREFIX(/usr/lib/j2se) + KDE_JAVA_PREFIX(/usr/j*dk*) + KDE_JAVA_PREFIX(/usr/lib/j*dk*) + KDE_JAVA_PREFIX(/opt/j*sdk*) + KDE_JAVA_PREFIX(/usr/lib/java*) + KDE_JAVA_PREFIX(/usr/java*) + KDE_JAVA_PREFIX(/usr/java/j*dk*) + KDE_JAVA_PREFIX(/usr/java/j*re*) + KDE_JAVA_PREFIX(/usr/lib/SunJava2*) + KDE_JAVA_PREFIX(/usr/lib/SunJava*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava*) + KDE_JAVA_PREFIX(/opt/java*) + + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + for dir in $PATH; do + if test -d "$dir"; then + javadirs="$javadirs $dir" + fi + done + IFS=$kde_save_IFS + jredirs= + + dnl Now javadirs contains a list of paths that exist, all ending with bin/ + for dir in $javadirs; do + dnl Check for the java executable + if test -x "$dir/java"; then + dnl And also check for a libjvm.so somewhere under there + dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big. + if test "$dir" != "/usr/bin"; then + libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + if test ! -f $libjvmdir/libjvm.so; then continue; fi + jredirs="$jredirs $dir" + fi + fi + done + + dnl Now jredirs contains a reduced list, of paths where both java and ../**/libjvm.so was found + JAVAC= + JAVA= + kde_java_bindir=no + for dir in $jredirs; do + JAVA="$dir/java" + kde_java_bindir=$dir + if test -x "$dir/javac"; then + JAVAC="$dir/javac" + break + fi + done + + if test -n "$JAVAC"; then + dnl this substitution might not work - well, we test for jni.h below + kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` + else + kde_java_includedir=no + fi + else + dnl config option set + kde_java_bindir=$ac_java_dir/bin + if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then + kde_java_includedir=no + else + kde_java_includedir=$ac_java_dir/include + fi + fi +fi + +dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" +if test "x$kde_java_bindir" != "xno"; then + + dnl Look for libjvm.so + kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + dnl Look for libgcj.so + kde_java_libgcjdir=`find $kde_java_bindir/.. -name libgcj.so | sed 's,libgcj.so,,'|head -n 1` + dnl Look for libhpi.so and avoid green threads + kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` + + dnl Now check everything's fine under there + dnl the include dir is our flag for having the JDK + if test -d "$kde_java_includedir"; then + if test ! -x "$kde_java_bindir/javac"; then + AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) + fi + if test ! -x "$kde_java_bindir/javah"; then + AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -x "$kde_java_bindir/jar"; then + AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -r "$kde_java_includedir/jni.h"; then + AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) + fi + + jni_includes="-I$kde_java_includedir" + dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. + dnl and under linux here.. + + dnl not needed for gcj + + if test "x$kde_java_libgcjdir" = "x"; then + test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" + test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" + test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" + fi + + else + JAVAC= + jni_includes= + fi + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libjvmdir/libjvm.so"; then + AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) + fi + else + if test ! -r "$kde_java_libgcjdir/libgcj.so"; then + AC_MSG_ERROR([libgcj.so not found under $kde_java_libgcjdir. Use --without-java.]) + fi + fi + + if test ! -x "$kde_java_bindir/java"; then + AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + + dnl not needed for gcj compile + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libhpidir/libhpi.so"; then + AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) + fi + fi + + if test -n "$jni_includes"; then + dnl Check for JNI version + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_cxxflags_safe="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" + + AC_TRY_COMPILE([ + #include + ], + [ + #ifndef JNI_VERSION_1_2 + Syntax Error + #endif + ],[ kde_jni_works=yes ], + [ kde_jni_works=no ]) + + if test $kde_jni_works = no; then + AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. + You need to have Java Development Kit (JDK) version 1.2. + + Use --with-java to specify another location. + Use --without-java to configure without java support. + Or download a newer JDK and try again. + See e.g. http://java.sun.com/products/jdk/1.2 ]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + AC_LANG_RESTORE + + dnl All tests ok, inform and subst the variables + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + if test "x$kde_java_libgcjdir" = "x"; then + JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" + else + JVMLIBS="-L$kde_java_libgcjdir -lgcj" + fi + AC_MSG_RESULT([java JDK in $kde_java_bindir]) + + else + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([java JRE in $kde_java_bindir]) + fi +elif test -d "/Library/Java/Home"; then + kde_java_bindir="/Library/Java/Home/bin" + jni_includes="-I/Library/Java/Home/include" + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + JVMLIBS="-Xlinker -framework -Xlinker JavaVM" + + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([Apple Java Framework]) +else + AC_MSG_RESULT([none found]) +fi + +AC_SUBST(JAVAC) +AC_SUBST(JAVAH) +AC_SUBST(JAR) +AC_SUBST(JVMLIBS) +AC_SUBST(jni_includes) + +# for backward compat +kde_cv_java_includedir=$kde_java_includedir +kde_cv_java_bindir=$kde_java_bindir +]) + +dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. +dnl When the argument list becomes big, as in KDE for AC_OUTPUT in +dnl big packages, m4_foreach is dog-slow. So use our own version of +dnl it. (matz@kde.org) +m4_define([mm_foreach], +[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) +m4_define([mm_car], [[$1]]) +m4_define([mm_car2], [[$@]]) +m4_define([_mm_foreach], +[m4_if(m4_quote($2), [], [], + [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], + mm_car2(m4_shift($2)), + [$3])])]) +m4_define([AC_FOREACH], +[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) + +AC_DEFUN([KDE_NEED_FLEX], +[ +kde_libs_safe=$LIBS +LIBS="$LIBS $USER_LDFLAGS" +AM_PROG_LEX +LIBS=$kde_libs_safe +if test -z "$LEXLIB"; then + AC_MSG_ERROR([You need to have flex installed.]) +fi +AC_SUBST(LEXLIB) +]) + +AC_DEFUN([AC_PATH_QTOPIA], +[ + dnl TODO: use AC_CACHE_VAL + + if test -z "$1"; then + qtopia_minver_maj=1 + qtopia_minver_min=5 + qtopia_minver_pat=0 + else + qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` + qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` + qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` + fi + + qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" + qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" + + AC_REQUIRE([AC_PATH_QT]) + + AC_MSG_CHECKING([for Qtopia]) + + LIB_QTOPIA="-lqpe" + AC_SUBST(LIB_QTOPIA) + + kde_qtopia_dirs="$QPEDIR /opt/Qtopia" + + ac_qtopia_incdir=NO + + AC_ARG_WITH(qtopia-dir, + AC_HELP_STRING([--with-qtopia-dir=DIR],[where the root of Qtopia is installed]), + [ ac_qtopia_incdir="$withval"/include] ) + + qtopia_incdirs="" + for dir in $kde_qtopia_dirs; do + qtopia_incdirs="$qtopia_incdirs $dir/include" + done + + if test ! "$ac_qtopia_incdir" = "NO"; then + qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" + fi + + qtopia_incdir="" + AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) + ac_qtopia_incdir="$qtopia_incdir" + + if test -z "$qtopia_incdir"; then + AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) + fi + + qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; + qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; + qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; + + qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" + qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" + if test "$qtopia_ver" -lt "$qtopia_minver"; then + AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr +is required.]) + fi + + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + ac_cxxflags_safe="$CXXFLAGS" + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" + LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" + LIBS="$LIBS $LIB_QTOPIA $LIBQT" + + cat > conftest.$ac_ext < +#include + +int main( int argc, char **argv ) +{ + QPEApplication app( argc, argv ); + return 0; +} +EOF + + if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* + else + rm -f conftest* + AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at +the end of config.log]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + AC_LANG_RESTORE + + QTOPIA_INCLUDES="-I$qtopia_incdir" + AC_SUBST(QTOPIA_INCLUDES) + + AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) +]) + + +AC_DEFUN([KDE_INIT_DOXYGEN], +[ +AC_MSG_CHECKING([for Qt docs]) +kde_qtdir= +if test "${with_qt_dir+set}" = set; then + kde_qtdir="$with_qt_dir" +fi + +AC_FIND_FILE(qsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) +AC_MSG_RESULT($QTDOCDIR) + +AC_SUBST(QTDOCDIR) + +KDE_FIND_PATH(dot, DOT, [], []) +if test -n "$DOT"; then + KDE_HAVE_DOT="YES" +else + KDE_HAVE_DOT="NO" +fi +AC_SUBST(KDE_HAVE_DOT) +KDE_FIND_PATH(doxygen, DOXYGEN, [], []) +AC_SUBST(DOXYGEN) + +DOXYGEN_PROJECT_NAME="$1" +DOXYGEN_PROJECT_NUMBER="$2" +AC_SUBST(DOXYGEN_PROJECT_NAME) +AC_SUBST(DOXYGEN_PROJECT_NUMBER) + +KDE_HAS_DOXYGEN=no +if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/qsql.html; then + KDE_HAS_DOXYGEN=yes +fi +AC_SUBST(KDE_HAS_DOXYGEN) + +]) + + +AC_DEFUN([AC_FIND_BZIP2], +[ +AC_MSG_CHECKING([for bzDecompress in libbz2]) +AC_CACHE_VAL(ac_cv_lib_bzip2, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#define BZ_NO_STDIO +#include +], + [ bz_stream s; (void) bzDecompress(&s); ], + eval "ac_cv_lib_bzip2='-lbz2'", + eval "ac_cv_lib_bzip2=no") +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +AC_MSG_RESULT($ac_cv_lib_bzip2) + +if test ! "$ac_cv_lib_bzip2" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2" + AC_SUBST(LIBBZ2) + +else + + cxx_shared_flag= + ld_shared_flag= + KDE_CHECK_COMPILER_FLAG(shared, [ + ld_shared_flag="-shared" + ]) + KDE_CHECK_COMPILER_FLAG(fPIC, [ + cxx_shared_flag="-fPIC" + ]) + + AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) + AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + kde_save_LIBS="$LIBS" + LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" + kde_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" + + AC_TRY_LINK(dnl + [ + #define BZ_NO_STDIO + #include + ], + [ bz_stream s; (void) BZ2_bzDecompress(&s); ], + eval "ac_cv_lib_bzip2_prefix='-lbz2'", + eval "ac_cv_lib_bzip2_prefix=no") + LIBS="$kde_save_LIBS" + CXXFLAGS="$kde_save_CXXFLAGS" + AC_LANG_RESTORE + ])dnl + + AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) + + if test ! "$ac_cv_lib_bzip2_prefix" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2_prefix" + AC_SUBST(LIBBZ2) + + AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) + dnl else, we just ignore this + fi + +fi +AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the SSL headers and libraries. +dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) +dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([KDE_CHECK_SSL], +[ +LIBSSL="-lssl -lcrypto" +AC_REQUIRE([KDE_CHECK_LIB64]) + +ac_ssl_includes=NO ac_ssl_libraries=NO +ssl_libraries="" +ssl_includes="" +AC_ARG_WITH(ssl-dir, + AC_HELP_STRING([--with-ssl-dir=DIR],[where the root of OpenSSL is installed]), + [ ac_ssl_includes="$withval"/include + ac_ssl_libraries="$withval"/lib$kdelibsuff + ]) + +want_ssl=yes +AC_ARG_WITH(ssl, + AC_HELP_STRING([--without-ssl],[disable SSL checks]), + [want_ssl=$withval]) + +if test $want_ssl = yes; then + +AC_MSG_CHECKING(for OpenSSL) + +AC_CACHE_VAL(ac_cv_have_ssl, +[#try to guess OpenSSL locations + + ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" + ssl_incdirs="$ac_ssl_includes $ssl_incdirs" + AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) + ac_ssl_includes="$ssl_incdir" + + ssl_libdirs="/usr/lib$kdelibsuff /usr/local/lib$kdelibsuff /usr/ssl/lib$kdelibsuff /usr/local/ssl/lib$kdelibsuff $libdir $prefix/lib$kdelibsuff $exec_prefix/lib$kdelibsuff $kde_extra_libs" + if test ! "$ac_ssl_libraries" = "NO"; then + ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" + fi + + test=NONE + ssl_libdir=NONE + for dir in $ssl_libdirs; do + try="ls -1 $dir/libssl*" + if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done + + ac_ssl_libraries="$ssl_libdir" + + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" + LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" + + AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, + ac_ssl_rsaref="yes" + , + ac_ssl_rsaref="no" + ) + + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then + have_ssl=no + else + have_ssl=yes; + fi + + ]) + + eval "$ac_cv_have_ssl" + + AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) + + AC_MSG_CHECKING([whether OpenSSL uses rsaref]) + AC_MSG_RESULT($ac_ssl_rsaref) + + AC_MSG_CHECKING([for easter eggs]) + AC_MSG_RESULT([none found]) + +else + have_ssl=no +fi + +if test "$have_ssl" = yes; then + AC_MSG_CHECKING(for OpenSSL version) + dnl Check for SSL version + AC_CACHE_VAL(ac_cv_ssl_version, + [ + + cat >conftest.$ac_ext < +#include + int main() { + +#ifndef OPENSSL_VERSION_NUMBER + printf("ssl_version=\\"error\\"\n"); +#else + if (OPENSSL_VERSION_NUMBER < 0x00906000) + printf("ssl_version=\\"old\\"\n"); + else + printf("ssl_version=\\"ok\\"\n"); +#endif + return (0); + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + if test "$ac_ssl_includes" != "/usr/include"; then + CPPFLAGS="$CPPFLAGS -I$ac_ssl_includes" + fi + + if AC_TRY_EVAL(ac_link); then + + if eval `./conftest 2>&5`; then + if test $ssl_version = error; then + AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) + else + if test $ssl_version = old; then + AC_MSG_WARN([OpenSSL version too old. Upgrade to 0.9.6 at least, see http://www.openssl.org. SSL support disabled.]) + have_ssl=no + fi + fi + ac_cv_ssl_version="ssl_version=$ssl_version" + else + AC_MSG_ERROR([Your system couldn't run a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure , attaching your config.log]) + fi + + else + AC_MSG_ERROR([Your system couldn't link a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure , attaching your config.log]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + ]) + + eval "$ac_cv_ssl_version" + AC_MSG_RESULT($ssl_version) +fi + +if test "$have_ssl" != yes; then + LIBSSL=""; +else + AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) + ac_cv_have_ssl="have_ssl=yes \ + ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" + + + ssl_libraries="$ac_ssl_libraries" + ssl_includes="$ac_ssl_includes" + + if test "$ac_ssl_rsaref" = yes; then + LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" + fi + + if test $ssl_version = "old"; then + AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 0.9.6]) + fi +fi + +SSL_INCLUDES= + +if test "$ssl_includes" = "/usr/include"; then + if test -f /usr/kerberos/include/krb5.h; then + SSL_INCLUDES="-I/usr/kerberos/include" + fi +elif test "$ssl_includes" != "/usr/local/include" && test -n "$ssl_includes"; then + SSL_INCLUDES="-I$ssl_includes" +fi + +if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries" || test "$ssl_libraries" = "NONE"; then + SSL_LDFLAGS="" +else + SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" +fi + +AC_SUBST(SSL_INCLUDES) +AC_SUBST(SSL_LDFLAGS) +AC_SUBST(LIBSSL) +]) + +AC_DEFUN([KDE_CHECK_STRLCPY], +[ + AC_REQUIRE([AC_CHECK_STRLCAT]) + AC_REQUIRE([AC_CHECK_STRLCPY]) + AC_CHECK_SIZEOF(size_t) + AC_CHECK_SIZEOF(unsigned long) + + AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) + AC_TRY_COMPILE(,[ + #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG + choke me + #endif + ],AC_MSG_RESULT([yes]),[ + AC_MSG_RESULT(no) + AC_MSG_ERROR([ + Apparently on your system our assumption sizeof size_t == sizeof unsigned long + does not apply. Please mail kde-devel@kde.org with a description of your system! + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_BINUTILS], +[ + AC_MSG_CHECKING([if ld supports unversioned version maps]) + + kde_save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + echo "{ local: extern \"C++\" { foo }; };" > conftest.map + AC_TRY_LINK([int foo;], +[ +#ifdef __INTEL_COMPILER +icc apparently does not support libtools version-info and version-script +at the same time. Dunno where the bug is, but until somebody figured out, +better disable the optional version scripts. +#endif + + foo = 42; +], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) + LDFLAGS="$kde_save_LDFLAGS" + rm -f conftest.map + AM_CONDITIONAL(include_VERSION_SCRIPT, + [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) + + AC_MSG_RESULT($kde_supports_versionmaps) +]) + +AC_DEFUN([AM_PROG_OBJC],[ +AC_CHECK_PROGS(OBJC, gcc, gcc) +test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) +if test "x${OBJCFLAGS-unset}" = xunset; then + OBJCFLAGS="-g -O2" +fi +AC_SUBST(OBJCFLAGS) +_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) +]) + +AC_DEFUN([KDE_CHECK_PERL], +[ + KDE_FIND_PATH(perl, PERL, [$bindir $exec_prefix/bin $prefix/bin], [ + AC_MSG_ERROR([No Perl found in your $PATH. +We need perl to generate some code.]) + ]) + AC_SUBST(PERL) +]) + +AC_DEFUN([KDE_CHECK_LARGEFILE], +[ +AC_SYS_LARGEFILE +if test "$ac_cv_sys_file_offset_bits" != no; then + CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits" +fi + +if test "x$ac_cv_sys_large_files" != "xno"; then + CPPFLAGS="$CPPFLAGS -D_LARGE_FILES=1" +fi + +]) + +dnl A small extension to PKG_CHECK_MODULES (defined in pkg.m4.in) +dnl which allows to search for libs that get installed into the KDE prefix. +dnl +dnl Syntax: KDE_PKG_CHECK_MODULES(KSTUFF, libkexif >= 0.2 glib = 1.3.4, action-if, action-not) +dnl defines KSTUFF_LIBS, KSTUFF_CFLAGS, see pkg-config man page +dnl also defines KSTUFF_PKG_ERRORS on error +AC_DEFUN([KDE_PKG_CHECK_MODULES], [ + + PKG_CONFIG_PATH="$prefix/lib/pkgconfig:$PKG_CONFIG_PATH" + if test "$prefix" != "$kde_libs_prefix"; then + PKG_CONFIG_PATH="$kde_libs_prefix/lib/pkgconfig:$PKG_CONFIG_PATH" + fi + export PKG_CONFIG_PATH + PKG_CHECK_MODULES($1,$2,$3,$4) +]) + +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- + +# serial 47 Debian 1.5.20-2 AC_PROG_LIBTOOL + + +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If this macro is not defined by Autoconf, define it here. +m4_ifdef([AC_PROVIDE_IFELSE], + [], + [m4_define([AC_PROVIDE_IFELSE], + [m4_ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) + + +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) +dnl And a similar setup for Fortran 77 support + AC_PROVIDE_IFELSE([AC_PROG_F77], + [AC_LIBTOOL_F77], + [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +])]) + +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL + + +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL + + +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +AC_REQUIRE([AC_PROG_NM])dnl + +AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl +dnl + +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR + +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e 1s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +AC_CHECK_TOOL(AR, ar, false) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; +esac + +AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +enable_win32_dll=yes, enable_win32_dll=no) + +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP + + +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_AC_SYS_COMPILER + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +AC_DEFUN([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +]) + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +AC_DEFUN([_LT_COMPILER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +AC_DEFUN([_LT_LINKER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_LINKER_BOILERPLATE + + +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX + + +# _LT_AC_SHELL_INIT(ARG) +# ---------------------- +AC_DEFUN([_LT_AC_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_AC_SHELL_INIT + + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[_LT_AC_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null 2>&1 && unset CDPATH + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +])])# _LT_AC_PROG_ECHO_BACKSLASH + + +# _LT_AC_LOCK +# ----------- +AC_DEFUN([_LT_AC_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; + ]) +esac + +need_locks="$enable_libtool_lock" + +])# _LT_AC_LOCK + + +# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +[AC_REQUIRE([LT_AC_PROG_SED]) +AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $rm conftest* +]) + +if test x"[$]$2" = xyes; then + ifelse([$5], , :, [$5]) +else + ifelse([$6], , :, [$6]) +fi +])# AC_LIBTOOL_COMPILER_OPTION + + +# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ------------------------------------------------------------ +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $echo "X$_lt_linker_boilerplate" | $Xsed > conftest.exp + $SED '/^$/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + ifelse([$4], , :, [$4]) +else + ifelse([$5], , :, [$5]) +fi +])# AC_LIBTOOL_LINKER_OPTION + + +# AC_LIBTOOL_SYS_MAX_CMD_LEN +# -------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +[# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + teststring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +])# AC_LIBTOOL_SYS_MAX_CMD_LEN + + +# _LT_AC_CHECK_DLFCN +# -------------------- +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h)dnl +])# _LT_AC_CHECK_DLFCN + + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + + +# AC_LIBTOOL_DLOPEN_SELF +# ------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + + +# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +# --------------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler +AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp + $SED '/^$/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* +]) +])# AC_LIBTOOL_PROG_CC_C_O + + +# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +# ----------------------------------------- +# Check to see if we can do hard links to lock some files if needed +AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +[AC_REQUIRE([_LT_AC_LOCK])dnl + +hard_links="nottested" +if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + + +# AC_LIBTOOL_OBJDIR +# ----------------- +AC_DEFUN([AC_LIBTOOL_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +])# AC_LIBTOOL_OBJDIR + + +# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +# ---------------------------------------------- +# Check hardcoding attributes. +AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_AC_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ + test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_AC_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + + +# AC_LIBTOOL_SYS_LIB_STRIP +# ------------------------ +AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +[striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) +fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +])# AC_LIBTOOL_SYS_LIB_STRIP + + +# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# ----------------------------- +# PORTME Fill in your ld.so characteristics +AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +[AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no +])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +# _LT_AC_TAGCONFIG +# ---------------- +AC_DEFUN([_LT_AC_TAGCONFIG], +[AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], + [include additional configurations @<:@automatic@:>@])], + [tagnames="$withval"]) + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + AC_MSG_WARN([output file `$ofile' does not exist]) + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in + "") ;; + *) AC_MSG_ERROR([invalid tag name: $tagname]) + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + AC_MSG_ERROR([tag name \"$tagname\" already exists]) + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + AC_LIBTOOL_LANG_F77_CONFIG + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + AC_LIBTOOL_LANG_GCJ_CONFIG + else + tagname="" + fi + ;; + + RC) + AC_LIBTOOL_LANG_RC_CONFIG + ;; + + *) + AC_MSG_ERROR([Unsupported tag name: $tagname]) + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi +fi +])# _LT_AC_TAGCONFIG + + +# AC_LIBTOOL_DLOPEN +# ----------------- +# enable checks for dlopen support +AC_DEFUN([AC_LIBTOOL_DLOPEN], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_DLOPEN + + +# AC_LIBTOOL_WIN32_DLL +# -------------------- +# declare package support for building win32 DLLs +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_WIN32_DLL + + +# AC_ENABLE_SHARED([DEFAULT]) +# --------------------------- +# implement the --enable-shared flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([shared], + [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +])# AC_ENABLE_SHARED + + +# AC_DISABLE_SHARED +# ----------------- +#- set the default shared flag to --disable-shared +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no) +])# AC_DISABLE_SHARED + + +# AC_ENABLE_STATIC([DEFAULT]) +# --------------------------- +# implement the --enable-static flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([static], + [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]AC_ENABLE_STATIC_DEFAULT) +])# AC_ENABLE_STATIC + + +# AC_DISABLE_STATIC +# ----------------- +# set the default static flag to --disable-static +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no) +])# AC_DISABLE_STATIC + + +# AC_ENABLE_FAST_INSTALL([DEFAULT]) +# --------------------------------- +# implement the --enable-fast-install flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([fast-install], + [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +])# AC_ENABLE_FAST_INSTALL + + +# AC_DISABLE_FAST_INSTALL +# ----------------------- +# set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no) +])# AC_DISABLE_FAST_INSTALL + + +# AC_LIBTOOL_PICMODE([MODE]) +# -------------------------- +# implement the --with-pic flag +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default) +])# AC_LIBTOOL_PICMODE + + +# AC_PROG_EGREP +# ------------- +# This is predefined starting with Autoconf 2.54, so this conditional +# definition can be removed once we require Autoconf 2.54 or later. +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], + [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi]) + EGREP=$ac_cv_prog_egrep + AC_SUBST([EGREP]) +])]) + + +# AC_PATH_TOOL_PREFIX +# ------------------- +# find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +])# AC_PATH_TOOL_PREFIX + + +# AC_PATH_MAGIC +# ------------- +# find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# AC_PATH_MAGIC + + +# AC_PROG_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([AC_PROG_LD], +[AC_ARG_WITH([gnu-ld], + [AC_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no]) +AC_REQUIRE([LT_AC_PROG_SED])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd* | netbsdelf*-gnu | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +])# AC_DEPLIBS_CHECK_METHOD + + +# AC_PROG_NM +# ---------- +# find the pathname to a BSD-compatible name lister +AC_DEFUN([AC_PROG_NM], +[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/${ac_tool_prefix}nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + esac + fi + done + IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi]) +NM="$lt_cv_path_NM" +])# AC_PROG_NM + + +# AC_CHECK_LIBM +# ------------- +# check for math library +AC_DEFUN([AC_CHECK_LIBM], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +])# AC_CHECK_LIBM + + +# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl convenience library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-convenience to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# it is assumed to be `libltdl'. LIBLTDL will be prefixed with +# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' +# (note the single quotes!). If your package is not flat and you're not +# using automake, define top_builddir and top_srcdir appropriately in +# the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_CONVENIENCE + + +# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl installable library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-install to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# and an installed libltdl is not found, it is assumed to be `libltdl'. +# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and top_srcdir +# appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, lt_dlinit, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + LTDLINCL= + fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_INSTALLABLE + + +# AC_LIBTOOL_CXX +# -------------- +# enable support for C++ libraries +AC_DEFUN([AC_LIBTOOL_CXX], +[AC_REQUIRE([_LT_AC_LANG_CXX]) +])# AC_LIBTOOL_CXX + + +# _LT_AC_LANG_CXX +# --------------- +AC_DEFUN([_LT_AC_LANG_CXX], +[AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +])# _LT_AC_LANG_CXX + +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP + +# AC_LIBTOOL_F77 +# -------------- +# enable support for Fortran 77 libraries +AC_DEFUN([AC_LIBTOOL_F77], +[AC_REQUIRE([_LT_AC_LANG_F77]) +])# AC_LIBTOOL_F77 + + +# _LT_AC_LANG_F77 +# --------------- +AC_DEFUN([_LT_AC_LANG_F77], +[AC_REQUIRE([AC_PROG_F77]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +])# _LT_AC_LANG_F77 + + +# AC_LIBTOOL_GCJ +# -------------- +# enable support for GCJ libraries +AC_DEFUN([AC_LIBTOOL_GCJ], +[AC_REQUIRE([_LT_AC_LANG_GCJ]) +])# AC_LIBTOOL_GCJ + + +# _LT_AC_LANG_GCJ +# --------------- +AC_DEFUN([_LT_AC_LANG_GCJ], +[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], + [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], + [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], + [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +])# _LT_AC_LANG_GCJ + + +# AC_LIBTOOL_RC +# -------------- +# enable support for Windows resource files +AC_DEFUN([AC_LIBTOOL_RC], +[AC_REQUIRE([LT_AC_PROG_RC]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +])# AC_LIBTOOL_RC + + +# AC_LIBTOOL_LANG_C_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +AC_DEFUN([_LT_AC_LANG_C_CONFIG], +[lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + +_LT_AC_SYS_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# +# Check for any special shared library compilation flags. +# +_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +if test "$GCC" = no; then + case $host_os in + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' + ;; + esac +fi +if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then + AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : + else + AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) + _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no + fi +fi + + +# +# Check to make sure the static flag actually works. +# +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) + + +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +# Report which librarie types wil actually be built +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case $host_os in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_C_CONFIG + + +# AC_LIBTOOL_LANG_CXX_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +[AC_LANG_PUSH(C++) +AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Dependencies to place before and after the object being linked: +_LT_AC_TAGVAR(predep_objects, $1)= +_LT_AC_TAGVAR(postdep_objects, $1)= +_LT_AC_TAGVAR(predeps, $1)= +_LT_AC_TAGVAR(postdeps, $1)= +_LT_AC_TAGVAR(compiler_lib_search_path, $1)= + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +else + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + AC_PROG_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +_LT_AC_TAGVAR(ld_shlibs, $1)=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + freebsd[[12]]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + freebsd* | kfreebsd*-gnu | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ;; + gnu*) + ;; + hpux9*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + ia64*|hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + linux*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc*) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC*) + # Portland Group C++ compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + openbsd2*) + # C++ shared libraries are fairly broken + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; + osf3*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + sco*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. We must also pass each convience library through + # to the system linker between allextract/defaultextract. + # The C++ compiler will combine linker options so we + # cannot just pass the convience library names through + # without $wl. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='echo' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +esac +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_AC_TAGVAR(GCC, $1)="$GXX" +_LT_AC_TAGVAR(LD, $1)="$LD" + +AC_LIBTOOL_POSTDEP_PREDEP($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +])# AC_LIBTOOL_LANG_CXX_CONFIG + +# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +# ------------------------ +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <> "$cfgfile" +ifelse([$1], [], +[#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e 1s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG], +[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +# Is the compiler the GNU C compiler? +with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_[]_LT_AC_TAGVAR(LD, $1) + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) + +# Commands used to build and install a shared archive. +archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + +# Set to yes if exported symbols are required. +always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + +# The commands to list exported symbols. +export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + +# Symbols that must always be exported. +include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + +ifelse([$1],[], +[# ### END LIBTOOL CONFIG], +[# ### END LIBTOOL TAG CONFIG: $tagname]) + +__EOF__ + +ifelse([$1],[], [ + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +]) +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi +])# AC_LIBTOOL_CONFIG + + +# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + +_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + + AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris* | sysv5*) + symcode='[[BDRT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[[]] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + + +# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +# --------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= + +AC_MSG_CHECKING([for $compiler option to produce PIC]) + ifelse([$1],[CXX],[ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | kfreebsd*-gnu | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + icpc* | ecpc*) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC*) + # Portland Group C++ compiler. + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + sco*) + case $cc_basename in + CC*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + *) + ;; + esac + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + unixware*) + ;; + vxworks*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + linux*) + case $cc_basename in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' + ;; + + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + unicos*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; +esac +]) + + +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + linux*) + _LT_AC_TAGVAR(link_all_deplibs, $1)=no + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + _LT_CC_BASENAME([$compiler]) + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=no + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + bsdi[[45]]*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi + ;; + + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu | dragonfly*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + wlarc='' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + *) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4.2uw2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv5*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac + fi + ;; +esac +])# AC_LIBTOOL_PROG_LD_SHLIBS + + +# _LT_AC_FILE_LTDLL_C +# ------------------- +# Be careful that the start marker always follows a newline. +AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ +])# _LT_AC_FILE_LTDLL_C + + +# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +# --------------------------------- +AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + + +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) + +AC_DEFUN([LT_AC_PROG_GCJ], +[AC_CHECK_TOOL(GCJ, gcj, no) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS) +]) + +AC_DEFUN([LT_AC_PROG_RC], +[AC_CHECK_TOOL(RC, windres, no) +]) + +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +# LT_AC_PROG_SED +# -------------- +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +AC_DEFUN([LT_AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_MSG_RESULT([$SED]) +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright 1997, 2000, 2001 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 5 + +AC_PREREQ(2.52) + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]) +fi])]) + +# Do all the work for Automake. -*- Autoconf -*- + +# This macro actually does too much some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 10 + +AC_PREREQ([2.54]) + +# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow +# the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl + AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_MISSING_PROG(AMTAR, tar) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl + +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +# Copyright 2002 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.7.9])]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright 2001, 2002 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 2 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# +# Check to make sure that the build environment is sane. +# + +# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 3 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# -*- Autoconf -*- + + +# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 3 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + -# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) +# AM_AUX_DIR_EXPAND -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.9.6])]) +# Copyright 2001 Free Software Foundation, Inc. -# AM_AUX_DIR_EXPAND -*- Autoconf -*- +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to @@ -76,55 +12353,131 @@ # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl +# Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50]) + +AC_DEFUN([AM_AUX_DIR_EXPAND], [ # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) -# AM_CONDITIONAL -*- Autoconf -*- +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# Copyright 2001 Free Software Foundation, Inc. -# serial 7 +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) -if $2; then - $1_TRUE= - $1_FALSE='#' +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# AM_PROG_INSTALL_STRIP + +# Copyright 2001 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# -*- Autoconf -*- +# Copyright (C) 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. else - $1_TRUE='#' - $1_FALSE= + am__leading_dot=_ fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) +# serial 5 -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. -# serial 8 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, @@ -133,6 +12486,7 @@ # CC etc. in the Makefile, will ask for an AC_PROG_CC use... + # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. @@ -191,9 +12545,7 @@ : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + : > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf @@ -221,14 +12573,9 @@ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + # (even with -Werror). So we grep stderr for any message + # that says an option was ignored. + if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi @@ -262,8 +12609,8 @@ # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) +[ --disable-dependency-tracking Speeds up one-time builds + --enable-dependency-tracking Do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' @@ -272,232 +12619,110 @@ AC_SUBST([AMDEPBACKSLASH]) ]) -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -#serial 3 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 12 - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.58])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl +# Generate code to set up dependency tracking. -*- Autoconf -*- -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) -]) +# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc. +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $1 | $1:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) +#serial 2 -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue + # Extract the definition of DEP_FILES from the Makefile without + # running `make'. + DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` + test -z "$DEPDIR" && continue + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n -e '/^U = / s///p' < "$mf"` + test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" + # We invoke sed twice because it is the simplest approach to + # changing $(DEPDIR) to its actual value in the expansion. + for file in `sed -n -e ' + /^DEP_FILES = .*\\\\$/ { + s/^DEP_FILES = // + :loop + s/\\\\$// + p + n + /\\\\$/ b loop + p + } + /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) -# serial 2 +# Check to see how 'make' treats includes. -*- Autoconf -*- -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) +# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. -# Check to see how 'make' treats includes. -*- Autoconf -*- +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. -# serial 3 +# serial 2 # AM_MAKE_INCLUDE() # ----------------- @@ -541,311 +12766,257 @@ rm -f confinc confmf ]) -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# Copyright 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. -# serial 4 +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. +# serial 3 -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) +AC_PREREQ(2.50) -# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. +# AM_PROG_LEX +# ----------- +# Autoconf leaves LEX=: if lex or flex can't be found. Change that to a +# "missing" invocation, for better error output. +AC_DEFUN([AM_PROG_LEX], +[AC_REQUIRE([AM_MISSING_HAS_RUN])dnl +AC_REQUIRE([AC_PROG_LEX])dnl +if test "$LEX" = :; then + LEX=${am_missing_run}flex +fi]) + +# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# +# Copyright © 2004 Scott James Remnant . # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_MKDIR_P -# --------------- -# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. # -# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories -# created by `make install' are always world readable, even if the -# installer happens to have an overly restrictive umask (e.g. 077). -# This was a mistake. There are at least two reasons why we must not -# use `-m 0755': -# - it causes special bits like SGID to be ignored, -# - it may be too restrictive (some setups expect 775 directories). -# -# Do not use -m 0755 and let people choose whatever they expect by -# setting umask. -# -# We cannot accept any implementation of `mkdir' that recognizes `-p'. -# Some implementations (such as Solaris 8's) are not thread-safe: if a -# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' -# concurrently, both version can detect that a/ is missing, but only -# one can create it and the other will error out. Consequently we -# restrict ourselves to GNU make (using the --version option ensures -# this.) -AC_DEFUN([AM_PROG_MKDIR_P], -[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi -AC_SUBST([mkdir_p])]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 3 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) +# PKG_PROG_PKG_CONFIG([MIN-VERSION]) +# ---------------------------------- +AC_DEFUN([PKG_PROG_PKG_CONFIG], +[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi -AC_MSG_RESULT(yes)]) +if test -n "$PKG_CONFIG"; then + _pkg_min_version=m4_default([$1], [0.9.0]) + AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi + +fi[]dnl +])# PKG_PROG_PKG_CONFIG -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# Check to see whether a particular set of modules exists. Similar +# to PKG_CHECK_MODULES(), but does not set variables or print errors. +# +# +# Similar to PKG_CHECK_MODULES, make sure that the first instance of +# this or PKG_CHECK_MODULES is called, or make sure to call +# PKG_CHECK_EXISTS manually +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_EXISTS], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then + m4_ifval([$2], [$2], [:]) +m4_ifvaln([$3], [else + $3])dnl +fi]) + + +# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +# --------------------------------------------- +m4_define([_PKG_CONFIG], +[if test -n "$PKG_CONFIG"; then + if test -n "$$1"; then + pkg_cv_[]$1="$$1" + else + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], + [pkg_failed=yes]) + fi +else + pkg_failed=untried +fi[]dnl +])# _PKG_CONFIG -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# _PKG_SHORT_ERRORS_SUPPORTED +# ----------------------------- +AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi[]dnl +])# _PKG_SHORT_ERRORS_SUPPORTED -# Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +# [ACTION-IF-NOT-FOUND]) # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# +# Note that if there is a possibility the first call to +# PKG_CHECK_MODULES might not happen, you should be sure to include an +# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +# +# +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_MODULES], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +pkg_failed=no +AC_MSG_CHECKING([for $1]) + +_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +and $1[]_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details.]) + +if test $pkg_failed = yes; then + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` + else + $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + + ifelse([$4], , [AC_MSG_ERROR(dnl +[Package requirements ($2) were not met: + +$$1_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +_PKG_TEXT +])], + [$4]) +elif test $pkg_failed = untried; then + ifelse([$4], , [AC_MSG_FAILURE(dnl +[The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. -# serial 2 +_PKG_TEXT -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac +To get pkg-config, see .])], + [$4]) +else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) + ifelse([$3], , :, [$3]) +fi[]dnl +])# PKG_CHECK_MODULES + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# Copyright 1996, 1998, 2000, 2001, 2002 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir +# serial 2 -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR +AC_DEFUN([AM_MAINTAINER_MODE], +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + +# isc-posix.m4 serial 2 (gettext-0.11.2) +dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +# This file is not needed with autoconf-2.53 and newer. Remove it in 2005. + +# This test replaces the one in autoconf. +# Currently this macro should have the same name as the autoconf macro +# because gettext's gettext.m4 (distributed in the automake package) +# still uses it. Otherwise, the use in gettext.m4 makes autoheader +# give these diagnostics: +# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX +# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX + +undefine([AC_ISC_POSIX]) + +AC_DEFUN([AC_ISC_POSIX], + [ + dnl This test replaces the obsolescent AC_ISC_POSIX kludge. + AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) + ] +) -m4_include([acinclude.m4]) --- qtparted-0.4.5.orig/DIFF +++ qtparted-0.4.5/DIFF @@ -0,0 +1,11 @@ +--- src/qp_fswrap.cpp 2006-08-31 10:02:03.000000000 +0000 ++++ src/qp_fswrap.cpp-orig 2006-08-31 10:02:01.000000000 +0000 +@@ -1015,7 +1015,7 @@ + /*---FAT32 WRAPPER---------------------------------------------------------------*/ + QString QP_FSFat32::_get_label(PedPartition *part) + { +- char buffer[PED_SECTOR_SIZE]; ++ char buffer[PED_SECTOR_SIZE_DEFAULT]; + char label[12]; + + if (!QP_FSWrap::read_sector(part, 0, 1, buffer)) --- qtparted-0.4.5.orig/data/qtparted.desktop +++ qtparted-0.4.5/data/qtparted.desktop @@ -1,12 +1,16 @@ [Desktop Entry] -Exec=/usr/sbin/qtparted +Exec=su-to-root -X -c /usr/sbin/qtparted Name=QTParted Icon=qtparted.xpm Terminal=false Type=Application Comment=Application for partitioning a disk +GenericName=Create, reorganize and remove partitions +GenericName[fr]=Créer, réorganiser et effacer des partitions Comment[it]=Applicazione per il partizionamento di un disco Comment[fr]=Application pour partitionner un disque Comment[fi]=Kiintolevyn partitiointityökalu Encoding=UTF-8 Categories=Application;System;QT; + +Version=0.9.4 --- qtparted-0.4.5.orig/data/Makefile.am +++ qtparted-0.4.5/data/Makefile.am @@ -5,7 +5,7 @@ splashdir = $(prefix)/share/qtparted/pics menu_DATA = qtparted.desktop -menudir = $(prefix)/share/applnk/System +menudir = $(prefix)/share/applications script_DATA = run_qtparted scriptdir = $(prefix)/sbin --- qtparted-0.4.5.orig/data/Makefile.in +++ qtparted-0.4.5/data/Makefile.in @@ -1,51 +1,553 @@ -# Makefile.in generated by unsermake -#################################### +# Makefile.in generated by automake 1.7.9 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 1.3 $ +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ -top_builddir = .. -top_srcdir = @top_srcdir@ srcdir = @srcdir@ -.FORWARDS: all install install-data install-exec clean check force-reedit install-data-hook +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. -all: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) all - -install: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install - -install-data: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-data - -install-exec: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-exec - -clean: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) clean - -check: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) check +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFAULT_DEBUG_LEVEL = @DEFAULT_DEBUG_LEVEL@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +FILESYS_EXT3FS_SUPPORT = @FILESYS_EXT3FS_SUPPORT@ +FILESYS_JFS_SUPPORT = @FILESYS_JFS_SUPPORT@ +FILESYS_NTFS_SUPPORT = @FILESYS_NTFS_SUPPORT@ +FILESYS_REISERFS_SUPPORT = @FILESYS_REISERFS_SUPPORT@ +FILESYS_XFS_SUPPORT = @FILESYS_XFS_SUPPORT@ +FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@ +FSPATH_MKFSEXT3 = @FSPATH_MKFSEXT3@ +FSPATH_MKFSJFS = @FSPATH_MKFSJFS@ +FSPATH_MKFSXFS = @FSPATH_MKFSXFS@ +FSPATH_MKNTFS = @FSPATH_MKNTFS@ +FSPATH_MOUNT = @FSPATH_MOUNT@ +FSPATH_NTFSRESIZE = @FSPATH_NTFSRESIZE@ +FSPATH_UMOUNT = @FSPATH_UMOUNT@ +FSPATH_XFS_GROWFS = @FSPATH_XFS_GROWFS@ +HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@ +HOMEPAGE = @HOMEPAGE@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KDE_CHECK_PLUGIN = @KDE_CHECK_PLUGIN@ +KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ +KDE_MT_LIBS = @KDE_MT_LIBS@ +KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@ +KDE_PLUGIN = @KDE_PLUGIN@ +KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ +KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ +KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ +KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ +KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@ +KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@ +LDFLAGS = @LDFLAGS@ +LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@ +LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@ +LIBCOMPAT = @LIBCOMPAT@ +LIBCRYPT = @LIBCRYPT@ +LIBDL = @LIBDL@ +LIBJPEG = @LIBJPEG@ +LIBOBJS = @LIBOBJS@ +LIBPNG = @LIBPNG@ +LIBPTHREAD = @LIBPTHREAD@ +LIBRESOLV = @LIBRESOLV@ +LIBS = @LIBS@ +LIBSM = @LIBSM@ +LIBSOCKET = @LIBSOCKET@ +LIBTOOL = @LIBTOOL@ +LIBUCB = @LIBUCB@ +LIBUTIL = @LIBUTIL@ +LIBZ = @LIBZ@ +LIB_POLL = @LIB_POLL@ +LIB_QPE = @LIB_QPE@ +LIB_QT = @LIB_QT@ +LIB_X11 = @LIB_X11@ +LIB_XEXT = @LIB_XEXT@ +LIB_XRENDER = @LIB_XRENDER@ +LN_S = @LN_S@ +LOGDIR = @LOGDIR@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ +MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ +MAKEINFO = @MAKEINFO@ +MOC = @MOC@ +NOOPT_CFLAGS = @NOOPT_CFLAGS@ +NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ +OBJEXT = @OBJEXT@ +OS = @OS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_QTDIR = @PATH_QTDIR@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +QTE_NORTTI = @QTE_NORTTI@ +QTPARTED_LDFLAGS = @QTPARTED_LDFLAGS@ +QTPARTED_LIBS = @QTPARTED_LIBS@ +QTPARTED_PREFIX = @QTPARTED_PREFIX@ +QTPATH_LRELEASE = @QTPATH_LRELEASE@ +QT_INCLUDES = @QT_INCLUDES@ +QT_LDFLAGS = @QT_LDFLAGS@ +RANLIB = @RANLIB@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +UIC = @UIC@ +UIC_TR = @UIC_TR@ +USER_INCLUDES = @USER_INCLUDES@ +USER_LDFLAGS = @USER_LDFLAGS@ +USE_EXCEPTIONS = @USE_EXCEPTIONS@ +USE_RTTI = @USE_RTTI@ +USE_THREADS = @USE_THREADS@ +VERSION = @VERSION@ +WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_INCLUDES = @X_INCLUDES@ +X_LDFLAGS = @X_LDFLAGS@ +X_PRE_LIBS = @X_PRE_LIBS@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +ac_ct_RANLIB = @ac_ct_RANLIB@ +ac_ct_STRIP = @ac_ct_STRIP@ +all_includes = @all_includes@ +all_libraries = @all_libraries@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +include_x11_FALSE = @include_x11_FALSE@ +include_x11_TRUE = @include_x11_TRUE@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_qtver = @kde_qtver@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +qt_includes = @qt_includes@ +qt_libraries = @qt_libraries@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@ +unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@ +x_includes = @x_includes@ +x_libraries = @x_libraries@ +pix_DATA = qtparted.xpm +pixdir = $(prefix)/share/pixmaps + +splash_DATA = qtp_splash.png qtparted_16.png qtparted_32.png qtparted_64.png +splashdir = $(prefix)/share/qtparted/pics + +menu_DATA = qtparted.desktop +menudir = $(prefix)/share/applications + +script_DATA = run_qtparted +scriptdir = $(prefix)/sbin + +EXTRA_DIST = $(pix_DATA) $(splash_DATA) $(menu_DATA) $(script_DATA) + +DISTCLEANFILES = run_qtparted +MAINTAINERCLEANFILES = Makefile.in run_qtparted +subdir = data +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = run_qtparted +DIST_SOURCES = +DATA = $(menu_DATA) $(pix_DATA) $(script_DATA) $(splash_DATA) + +DIST_COMMON = $(srcdir)/Makefile.in Makefile.am run_qtparted.in +#>- all: all-am +#>+ 1 +all: docs-am all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu data/Makefile +#>+ 3 + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu data/Makefile + cd $(top_srcdir) && perl admin/am_edit data/Makefile.in +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +run_qtparted: $(top_builddir)/config.status run_qtparted.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: +menuDATA_INSTALL = $(INSTALL_DATA) +install-menuDATA: $(menu_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(menudir) + @list='$(menu_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(menuDATA_INSTALL) $$d$$p $(DESTDIR)$(menudir)/$$f"; \ + $(menuDATA_INSTALL) $$d$$p $(DESTDIR)$(menudir)/$$f; \ + done + +uninstall-menuDATA: + @$(NORMAL_UNINSTALL) + @list='$(menu_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(menudir)/$$f"; \ + rm -f $(DESTDIR)$(menudir)/$$f; \ + done +pixDATA_INSTALL = $(INSTALL_DATA) +install-pixDATA: $(pix_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(pixdir) + @list='$(pix_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(pixDATA_INSTALL) $$d$$p $(DESTDIR)$(pixdir)/$$f"; \ + $(pixDATA_INSTALL) $$d$$p $(DESTDIR)$(pixdir)/$$f; \ + done + +uninstall-pixDATA: + @$(NORMAL_UNINSTALL) + @list='$(pix_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(pixdir)/$$f"; \ + rm -f $(DESTDIR)$(pixdir)/$$f; \ + done +scriptDATA_INSTALL = $(INSTALL_DATA) +install-scriptDATA: $(script_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(scriptdir) + @list='$(script_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(scriptDATA_INSTALL) $$d$$p $(DESTDIR)$(scriptdir)/$$f"; \ + $(scriptDATA_INSTALL) $$d$$p $(DESTDIR)$(scriptdir)/$$f; \ + done + +uninstall-scriptDATA: + @$(NORMAL_UNINSTALL) + @list='$(script_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(scriptdir)/$$f"; \ + rm -f $(DESTDIR)$(scriptdir)/$$f; \ + done +splashDATA_INSTALL = $(INSTALL_DATA) +install-splashDATA: $(splash_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(splashdir) + @list='$(splash_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(splashDATA_INSTALL) $$d$$p $(DESTDIR)$(splashdir)/$$f"; \ + $(splashDATA_INSTALL) $$d$$p $(DESTDIR)$(splashdir)/$$f; \ + done + +uninstall-splashDATA: + @$(NORMAL_UNINSTALL) + @list='$(splash_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(splashdir)/$$f"; \ + rm -f $(DESTDIR)$(splashdir)/$$f; \ + done +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) + +top_distdir = .. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(menudir) $(DESTDIR)$(pixdir) $(DESTDIR)$(scriptdir) $(DESTDIR)$(splashdir) +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +#>- clean: clean-am +#>+ 1 +clean: kde-rpo-clean clean-am + +#>- clean-am: clean-generic clean-libtool mostlyclean-am +#>+ 1 +clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-menuDATA install-pixDATA install-scriptDATA \ + install-splashDATA + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-info-am uninstall-menuDATA uninstall-pixDATA \ + uninstall-scriptDATA uninstall-splashDATA + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-menuDATA install-pixDATA \ + install-scriptDATA install-splashDATA install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ + uninstall-info-am uninstall-menuDATA uninstall-pixDATA \ + uninstall-scriptDATA uninstall-splashDATA -force-reedit: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) force-reedit install-data-hook: - @echo 'WARNING: use unsermake instead of make or use a wrapper script, e.g. makeobj!!!' - $(UNSERMAKE) install-data-hook + @for prog in $(script_DATA); do \ + chmod +x $(DESTDIR)$(scriptdir)/$$prog; \ + done +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: -$(top_builddir)/data/Makefile: $(top_builddir)/config.status $(top_srcdir)/data/Makefile.in - cd $(top_builddir) && $(SHELL) ./config.status data/Makefile +#>+ 2 +KDE_DIST=qtparted_32.png Makefile.in qtparted.xpm qtparted.desktop qtp_splash.png qtparted_64.png qtparted_16.png -$(top_builddir)/data/run_qtparted: $(top_builddir)/config.status $(srcdir)/run_qtparted.in - cd $(top_builddir) && $(SHELL) ./config.status data/run_qtparted +#>+ 2 +docs-am: -all: $(top_builddir)/data/Makefile -final: - @echo no programs available to recreate as final. Call in subdirs - -.PHONY: all final +#>+ 6 +force-reedit: + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu data/Makefile + cd $(top_srcdir) && perl admin/am_edit data/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-am + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck