--- scli-0.4.0.orig/debian/watch +++ scli-0.4.0/debian/watch @@ -0,0 +1,3 @@ +version=3 + +ftp://ftp.ibr.cs.tu-bs.de/pub/local/scli/scli-([0-9].*)\.tar\.gz --- scli-0.4.0.orig/debian/changelog +++ scli-0.4.0/debian/changelog @@ -0,0 +1,279 @@ +scli (0.4.0-1) unstable; urgency=low + + * New upstream release + * New "show bridge vlan info" command + * New "show bridge vlan details" command + * Removed the SNMP specific option which are now provided by gsnmp + * Dropped getopt in favour of glib's option parsing library + * Reworked the behaviour on an non-interactive tty (aka protocol mode) + * Using per default udp/ipv4 as transport (Closes: #497815) + * Updated upstream source address in debian/copyright + * Setup watch file + + -- Stefan Bauer Wed, 17 Feb 2010 15:54:04 +0100 + +scli (0.3.1-4) unstable; urgency=low + + * New Maintainer (Closes: #527856) + * Acknowledge NMU changes + * Bump Standards to 3.8.4 + * Make the package lintian clean + * Got rid of empty maintainer scripts + * Add patch to fix warning in scli.1.gz manpage + * Change debhelper dh_clean to dh_prep method in rules file + * Removing misplaced bash script outside of debian/ directory + as it's not part of original source package + + -- Stefan Bauer Tue, 16 Feb 2010 20:40:11 +0100 + +scli (0.3.1-3.1) unstable; urgency=low + + * Non-maintainer upload. + * Update gnet build-dep, closes: #475207 + + -- Riku Voipio Wed, 07 May 2008 12:08:07 +0300 + +scli (0.3.1-3) unstable; urgency=low + + * Build-depend on libsmi2-dev (closes: #465632) + + -- Remco van de Meent Sun, 02 Mar 2008 14:38:07 +0100 + +scli (0.3.1-2) experimental; urgency=low + + * Add libgnet to Build-Depends (closes: #406002) + + -- Remco van de Meent Sun, 7 Jan 2007 22:41:40 +0100 + +scli (0.3.1-1) experimental; urgency=low + + * New upstream release + * Update Standard-Version + + -- Remco van de Meent Thu, 4 Jan 2007 17:17:02 +0100 + +scli (0.3.0-0.1) experimental; urgency=low + + * New upstream release. SNMP engine is split off into libgsnmp0(-dev) + package. + + -- Remco van de Meent Mon, 16 Aug 2004 15:57:23 +0200 + +scli (0.2.12-2) unstable; urgency=low + + * Upgrade to standards-version 3.6.1 + * Updated config.{guess,sub} files + * Updated debian/copyright file to correctly mention upstream author + * Refer to common license file in debian/copyright + * Remove spurious debian/README.Debian file + + -- Remco van de Meent Wed, 4 Aug 2004 11:53:40 +0200 + +scli (0.2.12-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Mon, 2 Sep 2002 09:53:26 +0000 + +scli (0.2.11-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Wed, 3 Jul 2002 21:03:25 +0000 + +scli (0.2.10-2) unstable; urgency=low + + * Fix segfault using upstream CVS patch (closes: #151033) + + -- Remco van de Meent Wed, 26 Jun 2002 11:08:46 +0000 + +scli (0.2.10-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Tue, 25 Jun 2002 15:19:33 +0000 + +scli (0.2.9-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Tue, 28 May 2002 13:57:03 +0000 + +scli (0.2.8-2) unstable; urgency=low + + * Updated description (closes: #140328) + + -- Remco van de Meent Thu, 28 Mar 2002 16:12:27 +0100 + +scli (0.2.8-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Thu, 28 Mar 2002 12:08:54 +0100 + +scli (0.2.7-2) unstable; urgency=low + + * Fixed segfault while processing some cisco router output, closes: + #137080 + + -- Remco van de Meent Thu, 7 Mar 2002 10:23:08 +0100 + +scli (0.2.7-1) unstable; urgency=low + + * New upstream release + * Added quit alias for exit command, closes: #100503 + + -- Remco van de Meent Thu, 28 Feb 2002 10:27:46 +0100 + +scli (0.2.6-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Wed, 19 Dec 2001 17:51:30 +0100 + +scli (0.2.5-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Mon, 10 Dec 2001 19:04:26 +0100 + +scli (0.2.4-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Thu, 22 Nov 2001 13:42:47 +0100 + +scli (0.2.3-2) unstable; urgency=low + + * Updated aclocal and autoconf, closes: #118036 + + -- Remco van de Meent Sun, 18 Nov 2001 16:13:30 +0100 + +scli (0.2.3-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Mon, 1 Oct 2001 10:07:23 +0200 + +scli (0.2.2-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Wed, 26 Sep 2001 11:56:33 +0200 + +scli (0.2.1-1) unstable; urgency=low + + * Initial Release. `scli' is the new name of the `stools' package. + Conflicts and Replaces fields added. + + -- Remco van de Meent Tue, 18 Sep 2001 21:18:36 +0200 + +stools (0.1.20-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Thu, 30 Aug 2001 14:37:17 +0200 + +stools (0.1.19-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Thu, 21 Jun 2001 11:40:43 +0200 + +stools (0.1.18-1) unstable; urgency=low + + * New upstream release + * Added libtoolize and libtool build-depends + + -- Remco van de Meent Wed, 13 Jun 2001 01:24:48 +0200 + +stools (0.1.17-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Mon, 16 Apr 2001 21:31:51 +0200 + +stools (0.1.16-1) unstable; urgency=low + + * New upstream release (also closes: #93290) + + -- Remco van de Meent Tue, 10 Apr 2001 13:48:14 +0200 + +stools (0.1.15-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Mon, 26 Mar 2001 17:24:44 +0200 + +stools (0.1.14-2) unstable; urgency=low + + * Renamed stools-top to scltop. Upstream author wants to use 'stop' for + his binary but that conflicts with another package. This is something we + both agreed on. + + -- Remco van de Meent Tue, 20 Mar 2001 20:30:34 +0100 + +stools (0.1.14-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Thu, 15 Mar 2001 15:38:30 +0100 + +stools (0.1.13-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Fri, 9 Mar 2001 16:53:11 +0100 + +stools (0.1.12-2) unstable; urgency=low + + * Renamed snmp-cli to scli on request of upstream author + * Note: this version was never uploaded to the Debian distribution + + -- Remco van de Meent Mon, 5 Mar 2001 11:49:25 +0100 + +stools (0.1.12-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Thu, 1 Mar 2001 10:59:21 +0100 + +stools (0.1.11-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Tue, 27 Feb 2001 14:04:26 +0100 + +stools (0.1.10-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Wed, 21 Feb 2001 22:44:55 +0100 + +stools (0.1.9-3) unstable; urgency=low + + * Fixed Build-Depends, closes #86522 + + -- Remco van de Meent Sun, 18 Feb 2001 17:49:50 +0100 + +stools (0.1.9-2) unstable; urgency=low + + * Renamed binaries to snmp-* because of conflicting filenames, closes: #86492 + + -- Remco van de Meent Sun, 18 Feb 2001 14:36:05 +0100 + +stools (0.1.9-1) unstable; urgency=low + + * New upstream release + + -- Remco van de Meent Sat, 17 Feb 2001 14:38:33 +0100 + +stools (0.1.7-1) unstable; urgency=low + + * Initial Release (closes: #85983) + + -- Remco van de Meent Wed, 14 Feb 2001 20:46:08 +0100 + +Local variables: +mode: debian-changelog +End: --- scli-0.4.0.orig/debian/dirs +++ scli-0.4.0/debian/dirs @@ -0,0 +1,4 @@ +usr/bin +usr/share/man/man1 +usr/share/info +usr/share/doc/scli --- scli-0.4.0.orig/debian/compat +++ scli-0.4.0/debian/compat @@ -0,0 +1 @@ +7 --- scli-0.4.0.orig/debian/control +++ scli-0.4.0/debian/control @@ -0,0 +1,21 @@ +Source: scli +Section: net +Priority: optional +Maintainer: Stefan Bauer +Build-Depends: debhelper (>= 7.0.15), libgsnmp0-dev (>= 0.3.0), libreadline-dev, libglib2.0-dev, libncurses-dev, libsmi2-dev, libtool, automake1.9, libxml2-dev, libgnet-dev, quilt, texinfo +Standards-Version: 3.8.4 + +Package: scli +Architecture: any +Conflicts: stools +Replaces: stools +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: a collection of SNMP command line management tools + The scli package was written in order to have small and efficient command + line utility to monitor and configure network devices and host systems. The + scli package is based on the SNMP management protocol and it utilizes a + MIB compiler called smidump to generate C stub code. In fact, virtually no + SNMP knowledge is required in order to extend the scli programs with new + features. + . + scli replaces the stools package --- scli-0.4.0.orig/debian/copyright +++ scli-0.4.0/debian/copyright @@ -0,0 +1,30 @@ +This package was first debianized by Remco van de Meent on +Wed, 14 Feb 2001 20:46:08 +0100. + +Package is now maintained by Stefan Bauer + +It was downloaded from ftp://ftp.ibr.cs.tu-bs.de/local/scli/ + +Upstream author: Juergen Schoenwaelder + +Copyright: + + +Copyright (C) 2002 Juergen Schoenwaelder + +scli is free software; you can redistribute it and/or modify it under the +terms of the GNU General Public License as published by the Free Software +Foundation; either version 2 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +more details. + +You should have received a copy of the GNU General Public License along with +this program; if not, write to Free Software Foundation, Inc., 51 Franklin St, +Fifth Floor, Boston, MA 02110-1301, USA. + +The full text of the GNU GPL can be found in /usr/share/common-licenses on +Debian systems. --- scli-0.4.0.orig/debian/docs +++ scli-0.4.0/debian/docs @@ -0,0 +1,4 @@ +NEWS +README +TODO +debian/README.source --- scli-0.4.0.orig/debian/info +++ scli-0.4.0/debian/info @@ -0,0 +1 @@ +doc/scli.info --- scli-0.4.0.orig/debian/README.source +++ scli-0.4.0/debian/README.source @@ -0,0 +1,7 @@ +Building scli for Debian +-------------------------------- + +The scli source package uses quilt to apply and remove its patches. +Please refer to /usr/share/doc/quilt/README.source for information about how to +use quilt for source packages. + --- scli-0.4.0.orig/debian/scli.debhelper.log +++ scli-0.4.0/debian/scli.debhelper.log @@ -0,0 +1,2 @@ +dh_prep +dh_prep --- scli-0.4.0.orig/debian/rules +++ scli-0.4.0/debian/rules @@ -0,0 +1,90 @@ +#!/usr/bin/make -f +# Sample debian/rules that uses debhelper. +# GNU copyright 1997 to 1999 by Joey Hess. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +include /usr/share/quilt/quilt.make + +configure: configure-stamp +configure-stamp: + dh_testdir + # Add here commands to configure the package. + ./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info + + touch configure-stamp + +build: configure-stamp build-stamp +build-stamp: + dh_testdir + + # Add here commands to compile the package. + $(MAKE) + #/usr/bin/docbook-to-man debian/scli.sgml > scli.1 + + touch build-stamp + +clean: unpatch + dh_testdir + dh_testroot + rm -f build-stamp configure-stamp + + # Add here commands to clean up after the build process. + [ ! -f Makefile ] || $(MAKE) distclean + + #libtoolize -c --force + #aclocal + + dh_prep + +install: build + dh_testdir + dh_testroot + dh_prep + dh_installdirs + + # Add here commands to install the package into debian/scli. + $(MAKE) install prefix=$(CURDIR)/debian/scli + +install: $(QUILT_STAMPFN) + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot +# dh_installdebconf + dh_installdocs + dh_installexamples + dh_installmenu +# dh_installlogrotate +# dh_installemacsen +# dh_installpam +# dh_installmime +# dh_installinit + dh_installcron + dh_installman scli/scli.1 + mv -f debian/scli/bin/scli debian/scli/usr/bin/scli + rm -rf debian/scli/bin + rm -rf debian/scli/share + dh_installinfo +# dh_undocumented + dh_installchangelogs ChangeLog + dh_link + dh_strip + dh_compress + dh_fixperms +# dh_makeshlibs + dh_installdeb +# dh_perl + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install configure --- scli-0.4.0.orig/debian/patches/0001-removing-missing-macro-from-manpage.patch +++ scli-0.4.0/debian/patches/0001-removing-missing-macro-from-manpage.patch @@ -0,0 +1,44 @@ +This patch fixes a few formating problems in the manpage +--- scli-0.3.1/scli/scli.1 2007-01-03 00:20:57.000000000 +0100 ++++ scli.1 2010-02-16 21:57:29.000000000 +0100 +@@ -73,7 +73,7 @@ + Show summary of scli options. + .TP + .B \-i, \-\-inet +-Execute in inet mode. This option implies -q, -n and -x. ++Execute in inet mode. This option implies \-q, \-n and \-x. + .TP + .B \-n, \-\-norc + Do not evaluate ~/.sclirc on startup. +@@ -469,10 +469,7 @@ distributed managers. + .B monitor schedule info + .TP + .B monitor disman run +-.PP +-... +-.PP +-... ++ + .PP + languages supported by the distributed manager + .PP +@@ -493,10 +490,6 @@ information about the scheduled actions. + .PP + schedules on the distributed manager + .PP +-... +-.PP +-... +-.PP + The \fIdump schedule\fP command generates a sequence of scli + commands which can be used to restore the schedule configuration. + .PP +@@ -576,8 +569,6 @@ a table which has the following columns: + XMIT MAC transmit errors per second + CARR carrier sense errors per second + .PP +-... +-.PP + The \fImonitor ethernet stats\fP command shows the same information + as the show ethernet stats command. The information is updated + periodically. --- scli-0.4.0.orig/debian/patches/series +++ scli-0.4.0/debian/patches/series @@ -0,0 +1 @@ +0001-removing-missing-macro-from-manpage.patch