--- wput-0.6.orig/doc/wput.1 +++ wput-0.6/doc/wput.1 @@ -0,0 +1,348 @@ +.TH "wput" "1" "0.6" "Hagen Fritsch" "Internet Applications - FTP" +.SH "NAME" +wput \- A wget\-like ftp\-uploader +.SH "SYNOPSIS" +wput [\fIoption\fR]... [\fI\s-1file\s0\fR]... [\fI\s-1URL\s0\fR]... +.SH "DESCRIPTION" +Wput is a free utility that is able to upload files to a ftp-server. +.PP +Wput is non\-interactive and background-capable. It can upload files or whole +directories and is meant to be a robust client even for unstable connections +and will therefore retry to upload a file, if the connection broke. +.PP +Wput supports resuming, so it automatically continues uploading from the point +where the previous upload stopped, meaning that you can kill Wput anytime and +it will (if the remote ftp\-server supports this, being most likely the case) +finish the partial uploaded file. +.PP +Wput supports connections through proxies, allowing you to use it in an +environment that can access the internet only via a proxy or to provide +anonymity by hiding your ip\-address to the server. +For SOCKSv5\-proxies Wput supports also listening mode, allowing you to use +port-mode ftp through a proxy (useful if the remote ftp is behind a firewall +or a gateway). +.PP +Wput supports timestamping, so it will (in the ideal case and if timestamping +is enabled) only upload files, that are newer than the remote-file. +.PP +The upload-rate of Wput can be restricted, so that Wput won't eat all available +bandwidth. +.SH "URL\-Input\-Handling" +URLs are recognized by the ftp://\-prefix +.PP +Wput first reads the URLs from command-line, and associates the first file with +the first URL, the second file with the second URL etc. +It then transmits the file/URL combinations that are already complete. +Afterwards, Wput uses the \-\-input\-file (if any) and reads the URLs using the +same sheme as above. +In situations where more URLs than files are specified, Wput tries to guess the +local filename from the URL. +In case there are more files that URLs remaining, Wput uses the last known URL for each of the files. +.PP +So you can specify e.g. one URL and read all filenames from a file. +Or use \fIwput *.txt ftp://host\fR, to transfer all *.txt-files. +So \fIEXAMPLES\fR for further examples. +.PP +To be on the safe side, it is recommended to supply the files before the URLs. +.SH "Guessing Local File" +If Wput has an URL without a corresponding filename, Wput tries to guess the +local file's location. e.g. using wput ftp://host/directory/path/file, Wput +will look out for /directory/path/file. If not found, Wput looks for ./directory/path/file, ./path/file and ./file. +.SH "OPTIONS" +.Sh "Basic Startup Options" +.IP "\fB\-V\fR" 4 +.IX Item "-V" +.PD 0 +.IP "\fB\-\-version\fR" 4 +.IX Item "--version" +.PD +Display the version of wput. +.IP "\fB\-h\fR" 4 +.IX Item "-h" +.PD 0 +.IP "\fB\-\-help\fR" 4 +.IX Item "--help" +.PD +Print a help screen, with a short description of wput's command-line options. +.IP "\fB\-b\fR" 4 +.IX Item "-b" +.PD 0 +.IP "\fB\-\-background\fR" 4 +.IX Item "--background" +.PD +Go to background immediately after startup. If no output file is given, +wput will redirect its output to "./wputlog" +.Sh "Logging and Input File Options" +.IX Subsection "Logging and Input File Options" +.IP "\fB\-o\fR \fIlogfile\fR" 4 +.IX Item "-o logfile" +.PD 0 +.IP "\fB\-\-output\-file=\fR\fIlogfile\fR" 4 +.IX Item "--output-file=logfile" +.PD +Log all messages to \fIlogfile\fR. +.IP "\fB\-a\fR \fIlogfile\fR" 4 +.IX Item "-a logfile" +.PD 0 +.IP "\fB\-\-append\-output=\fR\fIlogfile\fR" 4 +.IX Item "--append-output=logfile" +.PD +Append all logged messages to \fIlogfile\fR. +.IP "\fB\-q\fR" 4 +.IX Item "-q" +.PD 0 +.IP "\fB\-\-quiet\fR" 4 +.IX Item "--quiet" +.PD +Turn off Wput's output. +.IP "\fB\-v\fR" 4 +.IX Item "-v" +.PD 0 +.IP "\fB\-\-verbose\fR" 4 +.IX Item "--verbose" +.PD +Turn on verbose output. This gives some more information about what Wput +does. If you specify this flag twice, you get debug output. +.IP "\fB\-nv\fR" 4 +.IX Item "-nv" +.PD 0 +.IP "\fB\-\-less\-verbose\fR" 4 +.IX Item "--less-verbose" +.PD +Be less verbose. That means reducing Wput's output to a minimun. Specifiing +this flag more often is equal to the \-\-quiet flag. +Some people also like combining the \-v and \-nv flags, being quite senseless. +.IP "\fB\-i\fR \fIfile\fR" 4 +.IX Item "-i file" +.PD 0 +.IP "\fB\-\-input\-file=\fR\fIfile\fR" 4 +.IX Item "--input-file=file" +.PD +Reads URLs and filenames from \fIfile\fR. If there are URLs on the command-line +too, these will be retrieved first, unless sorting is enabled. +See also the URL-Input-Handling section. +.PD +If \fIfile\fR is \-, the URLs will be read from stdin. +.PD +If you want to pipe the contents of the file that shall be uploaded to +stdin, this cannot be done (yet). But you can use the \-\-input\-pipe flag +and read the contents a) from a named pipe \-I "cat named.pipe; echo > /dev/null" or b) +directly from the command, that outputs the data. (See \-\-input\-pipe) +.PD +Do \fBnot\fR do things like \fIfind | wput ftp://host/ \-i \-\fR! +Wput would upload all files from the current directory (since the first output +of find will be '.') and afterwards each file again (since find postes its name to Wput. And further problematic is that Wput will upload each directory that +is given by find and since find itself recurses all directories, the files +would be uploaded three times (or even more often for further subdirectories). +Use \fIwput ftp://host/\fR to upload everything from the local directory. +Or use \fIfind ! \-type d | wput ftp://host/ \-i \-\fR to tell find, not to +output directories. +.IP "\fB\-s\fR" 4 +.IX Item "-s" +.PD 0 +.IP "\fB\-\-sort\fR" 4 +.IX Item "--sort" +.PD +If sorting is enabled Wput first reads all URLs from any input-devices available +and will sort them before transmitting each file. +.PD +The sorting order is: ip/hostname, port, username, password, directory, filename. +Sorting requires a bit more memory since all data needs to be hold there. +.IP "\fB\-\-basename=\fR\fIpath\fR" 4 +.IX Item "--basename=path" +.PD +This option causes Wput to snip \fIpath\fR from all input\-files when they are +connected to the URL. wput /usr/share/doc.tgz ftp://host/ would create +ftp://host//usr/share/doc.tgz, whereas specifing /usr/share/ as basename will +result in ftp://host/doc.tgz being created. +.IP "\fB\-I\fR \fIcommand\fR" 4 +.IX Item "-I command" +.PD 0 +.IP "\fB\-\-input\-pipe=\fR\fIcommand\fR" 4 +.IX Item "--input-pipe=command" +.PD +If no file/directory can be "guessed" (see "Guessing Local File") from the URL, +the output of \fIcommand\fB is taken as file-input. command is invoked as follows: +.PP +\& command ftp "username" "ip/hostname" port "remote_directory" "remote_filename" +.IP "" 4 +.PD +The hostname is only supplied if the ip cannot be resolved. +If you do not want these parameters to confuse the programm from which you read +the contents, use something like '\-I "cat file; echo > /dev/null"' so that these +parameters are passed to echo and to /dev/null afterwards. +Since the progressbar is not capable of handling unknown filesizes, the filesize +is set to 1 GiB. Therefore the ETA shows a wrong value. +.IP "\fB\-R\fR" 4 +.IX Item "-R" +.PD 0 +.IP "\fB\-\-remove\-source\-files\fR" 4 +.IX Item "--remove-source-files" +.PD +Unlinks/deletes files that have been successfully transmitted. +.Sh "Upload Options" +.IX Subsection "Upload Options" +.IP "\fB\-\-bind\-address=\fR\fI\s-1ADDRESS\s0\fR" 4 +.IX Item "--bind-address=ADDRESS" +When making client \s-1TCP/IP\s0 connections, \f(CW\*(C`bind()\*(C'\fR to \fI\s-1ADDRESS\s0\fR on +the local machine. \fI\s-1ADDRESS\s0\fR may be specified as a hostname or \s-1IP\s0 +address. This option can be useful if your machine is bound to multiple +IPs. +.IP "\fB\-t\fR \fInumber\fR" 4 +.IX Item "-t number" +.PD 0 +.IP "\fB\-\-tries=\fR\fInumber\fR" 4 +.IX Item "--tries=number" +.PD +Set number of retries to \fInumber\fR. Specify \-1 for infinite retrying. +The default is to retry 3 times, with some exceptions on +fatal errors. +.IP "\fB\-nc\fR" 4 +.IX Item "-nc" +.PD 0 +.IP "\fB\-\-dont\-continue\fR" 4 +.IX Item "--dont-continue" +.PD +If this flag is specified, resuming will be turned off, meaning that a remote +file being smaller than the local one will be overwritten. To skip this file, +you have to enable \-\-skip\-existing. +.PD +See also \fIUSAGE.resumehandling\fR +.IP "\fB\-u\fR" 4 +.IX Item "-u" +.PD 0 +.IP "\fB\-\-reupload\fR" 4 +.IX Item "--reupload" +.PD +If this flag is specified, a remote file having the same size as the local one +is to be uploaded. Skipping is default. +.IP "\fB\-\-skip\-larger\fR" 4 +.IX Item "--skip-larger" +.PD +If this flag is specified, a remote file being larger than the local one will +be skipped. Default is reuploading it. +.IP "\fB\-\-skip\-existing\fR" 4 +.IX Item "--skip-existing" +.PD +If this flag is specified, the upload of a file will be skipped if the remote +file already exists. +.IP "\fB\-N\fR" 4 +.IX Item "-N" +.PD 0 +.IP "\fB\-\-timestamping\fR" 4 +.IX Item "--timestamping" +.PD +If timestamping is enabled, Wput will retrieve a directory list and parse it to +determine the remote file\-date. If the local file is newer than the remote one +(there is a default allowed timevariance of 5 seconds, which can be adjusted in +the \fIwputrc\fR-file) it is uploaded, otherwise skipped. +.PD +The local date is dermined by the mtime (time of last modification), using the +current time-zone. This should be equal to the output of ls \-l. +.PD +Since you usually do not want to resume existing files, you should employ the +\-\-reupload \-\-dont-continue flags as well. +.IP "\fB\-l\fR \fIRATE\fR" 4 +.IX Item "-l RATE" +.PD 0 +.IP "\fB\-\-limit\-rate=\fR\fIRATE\fR" 4 +.IX Item "--limit-rate=RATE" +If you don't want Wput to eat up all available bandwidth, specify this flag. +\fIRATE\fR is a numeric value. The units 'K' (for KiB) and 'M' (for MiB) are +understood. +.PD +The upload rate is limited on average, meaning that if you limit the rate to +10K and Wput was just able to send with 5K for the first seconds, it will +send (if possible) afterwards more than 10K until the average rate of 10K is +fulfilled. +.IP "\fB\-\-no\-directories\fR" 4 +.IX Item "--no-directories" +.PD +If Wput is unable to CWD into a directory, it will try to create it. If this +is not the desired behaviour specify this flag to force Wput not to create +any directories. +.IP "\fB\-Y\fR \fIMODE\fR" 4 +.IX Item "-Y MODE" +.PD 0 +.IP "\fB\-\-proxy=\fR\fIMODE\fR" 4 +.IX Item "--proxy=MODE" +.PD +MODE can be either \fIhttp\fR for http-based proxies (such as SQUID), +\fIsocks\fR for SOCKSv5 proxies or \fIoff\fR to disable the proxy. +.IP "\fB\-\-proxy-user=\fR\fINAME\fR" 4 +.IX Item "--proxy-user=NAME" +If the proxy\-server requires authentication, use \fINAME\fR as user-name. +You need to specify \-\-proxy-pass too. These information can also be +stored in the wputrc\-file. +.IP "\fB\-\-proxy-pass=\fR\fIPASS\fR" 4 +.IX Item "--proxy-pass=PASS" +Specifies the password to use for the proxy. +.Sh "FTP Options" +.IX Subsection "FTP Options" +.IP "\fB\-p\fR" 4 +.IX Item "-p" +.PD 0 +.IP "\fB\-\-port\-mode\fR" 4 +.IX Item "--port-mode" +Per default, Wput uses passive mode ftp, which works well for most +configurations. If passive mode fails, Wput automatically falls back to +port mode. +.PD +If you want Wput to start using port mode ftp, specify this flag. +.IP "\fB\-A\fR" 4 +.IX Item "-A" +.PD 0 +.IP "\fB\-\-ascii\fR" 4 +.IX Item "--ascii" +Wput automatically determines which transfer\-format to use, by looking at +the file-extensions. Certain files are recognized as ASCII. These are: +txt, c, java, cpp, sh, f, f90, f77, f95, bas", pro, csh, ksh, conf, htm, html, php, pl, cgi, inf, js, asp, bat, cfm, css, dhtml, diz, h, hpp, ini, mak, nfo, shtml, shtm, tcl, pas +.PD +Specifying this flag forces Wput to use ASCII mode file transfers. +.IP "\fB\-B\fR" 4 +.IX Item "-B" +.PD 0 +.IP "\fB\-\-binary\fR" 4 +.IX Item "--binary" +.PD +Specifiing this flag forces Wput to use BINARY mode file transfers. +.IP "\fB\-\-force-tls\fR" 4 +.IX Item "--force-tls" +If this flag is specified and Wput is linked with the OpenSSL-library, the flag +enforces the usage of TLS: If no TLS\-connection can be established the process +will cancel and not try to go on with an unencrypted connection. +.SH DIAGNOSTICS +Normally, the exit status is 0 if either everything went fine or there was nothing +to do. +If some files were skipped during the upload (due to timestamping or resume\-rules) +the exit status is set to 1. If some files failed to be transmitted due to an +remote error, exit status is 2. If some files failed and some others were skipped, +exit status is 3. For general problems like failure of some system-functions the +exit status is 4. +.SH BUGS +.IX Header "BUGS" +.PD +You are welcome to send bug reports and suggestions about Wput through the Sourceforge Bugtracking System: +http://sourceforge.net/tracker/?group_id=141519 +.PP 0 +Please send all available information that might concern this bug (e.g. +Operating System and what can be done to reproduce the error). Supply also +the debug-output (but remove confidential data if any), which helps a lot +analysing the problem. If you use a wputrc file, it might also be useful +to provide the relevant parts of it. +.PP 0 +If there is a crash due to a segfault or similar, try to run it in a debugger, +e.g. \f(CW\*(C`gdb `which wput` core\*(C'\fR and type \f(CW\*(C`where\*(C'\fR +to get the backtrace. It would also be great help if you could recompile wput +with memory-debugging support (make clean; make memdbg; [make install]) and use +this debug-dump. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +Many options can be set in a wputrc file. For its documentation consult the +sample file provided by Wput. +.PD 0 +There are some USAGE.* files in the doc/ directory of Wput. These contain +further information and samples on how to use Wput. +.SH "AUTHOR" +.IX Header "AUTHOR" +Wput is written by Hagen Fritsch --- wput-0.6.orig/config.sub +++ wput-0.6/config.sub @@ -1,9 +1,10 @@ #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, +# Inc. -timestamp='2004-03-12' +timestamp='2006-09-20' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -21,14 +22,15 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. + # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # @@ -70,7 +72,7 @@ version="\ GNU config.sub ($timestamp) -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -83,11 +85,11 @@ while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; + echo "$timestamp" ; exit ;; --version | -v ) - echo "$version" ; exit 0 ;; + echo "$version" ; exit ;; --help | --h* | -h ) - echo "$usage"; exit 0 ;; + echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. @@ -99,7 +101,7 @@ *local*) # First pass through any local machine types. echo $1 - exit 0;; + exit ;; * ) break ;; @@ -118,8 +120,9 @@ # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in - nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ - kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; @@ -145,7 +148,7 @@ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis) + -apple | -axis | -knuth | -cray) os= basic_machine=$1 ;; @@ -170,6 +173,10 @@ -hiux*) os=-hiuxwe2 ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` @@ -186,6 +193,10 @@ # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` @@ -230,14 +241,16 @@ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ - | m32r | m32rle | m68000 | m68k | m88k | mcore \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ @@ -246,6 +259,7 @@ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ @@ -254,20 +268,24 @@ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ + | mt \ | msp430 \ + | nios | nios2 \ | ns16k | ns32k \ - | openrisc | or32 \ + | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ - | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | score \ + | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ - | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \ - | strongarm \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ - | x86 | xscale | xstormy16 | xtensa \ + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; @@ -278,6 +296,9 @@ ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; + ms1) + basic_machine=mt-unknown + ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and @@ -297,10 +318,10 @@ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* \ - | bs2000-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | cydra-* \ + | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ @@ -308,9 +329,9 @@ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ - | m32r-* | m32rle-* \ + | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | mcore-* \ + | m88110-* | m88k-* | maxq-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ @@ -319,6 +340,7 @@ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ @@ -326,24 +348,28 @@ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ | msp430-* \ - | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ - | xtensa-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa-* \ | ymp-* \ | z8k-*) ;; @@ -445,6 +471,10 @@ basic_machine=j90-cray os=-unicos ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; cr16c) basic_machine=cr16c-unknown os=-elf @@ -452,6 +482,9 @@ crds | unos) basic_machine=m68k-crds ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; @@ -481,6 +514,10 @@ basic_machine=m88k-motorola os=-sysv3 ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx @@ -659,10 +696,6 @@ mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; - mmix*) - basic_machine=mmix-knuth - os=-mmixware - ;; monitor) basic_machine=m68k-rom68k os=-coff @@ -675,6 +708,9 @@ basic_machine=i386-pc os=-msdos ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; mvs) basic_machine=i370-ibm os=-mvs @@ -743,10 +779,6 @@ np1) basic_machine=np1-gould ;; - nv1) - basic_machine=nv1-cray - os=-unicosmp - ;; nsr-tandem) basic_machine=nsr-tandem ;; @@ -754,9 +786,8 @@ basic_machine=hppa1.1-oki os=-proelf ;; - or32 | or32-*) + openrisc | openrisc-*) basic_machine=or32-unknown - os=-coff ;; os400) basic_machine=powerpc-ibm @@ -787,6 +818,12 @@ pc532 | pc532-*) basic_machine=ns32k-pc532 ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; @@ -843,6 +880,10 @@ basic_machine=i586-unknown os=-pw32 ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; rom68k) basic_machine=m68k-rom68k os=-coff @@ -869,6 +910,10 @@ sb1el) basic_machine=mipsisa64sb1el-unknown ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; sei) basic_machine=mips-sei os=-seiux @@ -1029,6 +1074,10 @@ basic_machine=hppa1.1-winbond os=-proelf ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; xps | xps100) basic_machine=xps100-honeywell ;; @@ -1059,6 +1108,9 @@ romp) basic_machine=romp-ibm ;; + mmix) + basic_machine=mmix-knuth + ;; rs6000) basic_machine=rs6000-ibm ;; @@ -1075,13 +1127,10 @@ we32k) basic_machine=we32k-att ;; - sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) + sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; - sh64) - basic_machine=sh64-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b) + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) @@ -1154,20 +1203,23 @@ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*) + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1185,7 +1237,7 @@ os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) @@ -1294,6 +1346,9 @@ -kaos*) os=-kaos ;; + -zvmoe) + os=-zvmoe + ;; -none) ;; *) @@ -1316,6 +1371,12 @@ # system, and we'll never get to this point. case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; *-acorn) os=-riscix1.2 ;; @@ -1325,9 +1386,9 @@ arm*-semi) os=-aout ;; - c4x-* | tic4x-*) - os=-coff - ;; + c4x-* | tic4x-*) + os=-coff + ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 @@ -1371,9 +1432,15 @@ *-be) os=-beos ;; + *-haiku) + os=-haiku + ;; *-ibm) os=-aix ;; + *-knuth) + os=-mmixware + ;; *-wec) os=-proelf ;; @@ -1539,7 +1606,7 @@ esac echo $basic_machine$os -exit 0 +exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) --- wput-0.6.orig/config.guess +++ wput-0.6/config.guess @@ -1,9 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, +# Inc. -timestamp='2004-06-11' +timestamp='2006-07-02' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -17,13 +18,15 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. + # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. @@ -53,7 +56,7 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -66,11 +69,11 @@ while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; + echo "$timestamp" ; exit ;; --version | -v ) - echo "$version" ; exit 0 ;; + echo "$version" ; exit ;; --help | --h* | -h ) - echo "$usage"; exit 0 ;; + echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. @@ -104,7 +107,7 @@ trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; @@ -123,7 +126,7 @@ ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ;' +esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) @@ -196,64 +199,23 @@ # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" - exit 0 ;; - amd64:OpenBSD:*:*) - echo x86_64-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - cats:OpenBSD:*:*) - echo arm-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - luna88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - macppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvmeppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mipseb-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sun3:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; + exit ;; *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit 0 ;; + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; macppc:MirBSD:*:*) - echo powerppc-unknown-mirbsd${UNAME_RELEASE} - exit 0 ;; + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit 0 ;; + exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) @@ -306,40 +268,43 @@ # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit 0 ;; - Alpha*:OpenVMS:*:*) - echo alpha-hp-vms - exit 0 ;; + exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix - exit 0 ;; + exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 - exit 0 ;; + exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 - exit 0;; + exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos - exit 0 ;; + exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos - exit 0 ;; + exit ;; *:OS/390:*:*) echo i370-ibm-openedition - exit 0 ;; + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; *:OS400:*:*) echo powerpc-ibm-os400 - exit 0 ;; + exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp - exit 0;; + exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then @@ -347,32 +312,32 @@ else echo pyramid-pyramid-bsd fi - exit 0 ;; + exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 - exit 0 ;; + exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 - exit 0 ;; - DRS?6000:UNIX_SV:4.2*:7*) + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7 && exit 0 ;; + sparc) echo sparc-icl-nx7; exit ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) @@ -381,10 +346,10 @@ esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; + exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; + exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 @@ -396,10 +361,10 @@ echo sparc-sun-sunos${UNAME_RELEASE} ;; esac - exit 0 ;; + exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; + exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor @@ -410,40 +375,40 @@ # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} - exit 0 ;; + exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; + exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 - exit 0 ;; + exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; + exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; + exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; + exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -467,32 +432,33 @@ exit (-1); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c \ - && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && exit 0 + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; + exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax - exit 0 ;; + exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax - exit 0 ;; + exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax - exit 0 ;; + exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix - exit 0 ;; + exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 - exit 0 ;; + exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 - exit 0 ;; + exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 - exit 0 ;; + exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` @@ -508,29 +474,29 @@ else echo i586-dg-dgux${UNAME_RELEASE} fi - exit 0 ;; + exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 - exit 0 ;; + exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 - exit 0 ;; + exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 - exit 0 ;; + exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd - exit 0 ;; + exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; + exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix - exit 0 ;; + exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` @@ -538,7 +504,7 @@ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit 0 ;; + exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build @@ -553,14 +519,18 @@ exit(0); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 - echo rs6000-ibm-aix3.2.5 + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi - exit 0 ;; + exit ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then @@ -574,28 +544,28 @@ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; + exit ;; *:AIX:*:*) echo rs6000-ibm-aix - exit 0 ;; + exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 - exit 0 ;; + exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 + exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx - exit 0 ;; + exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 - exit 0 ;; + exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd - exit 0 ;; + exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 - exit 0 ;; + exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in @@ -657,9 +627,19 @@ esac if [ ${HP_ARCH} = "hppa2.0w" ] then - # avoid double evaluation of $set_cc_for_build - test -n "$CC_FOR_BUILD" || eval $set_cc_for_build - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else @@ -667,11 +647,11 @@ fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; + exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} - exit 0 ;; + exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -699,166 +679,179 @@ exit (0); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 - exit 0 ;; + exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd - exit 0 ;; + exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd - exit 0 ;; + exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix - exit 0 ;; + exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf - exit 0 ;; + exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf - exit 0 ;; + exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi - exit 0 ;; + exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites - exit 0 ;; + exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd - exit 0 ;; + exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit 0 ;; + exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd - exit 0 ;; + exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd - exit 0 ;; + exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd - exit 0 ;; + exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; *:UNICOS/mp:*:*) - echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; + exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; + exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; + exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; + exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; + exit ;; *:FreeBSD:*:*) - # Determine whether the default compiler uses glibc. - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #if __GLIBC__ >= 2 - LIBC=gnu - #else - LIBC= - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - # GNU/KFreeBSD systems have a "k" prefix to indicate we are using - # FreeBSD's kernel, but not the complete OS. - case ${LIBC} in gnu) kernel_only='k' ;; esac - echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} - exit 0 ;; + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin - exit 0 ;; + exit ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 - exit 0 ;; + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 - exit 0 ;; - x86:Interix*:[34]*) - echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' - exit 0 ;; + exit ;; + x86:Interix*:[3456]*) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T:Interix*:[3456]*) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks - exit 0 ;; + exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix - exit 0 ;; + exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin - exit 0 ;; + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin - exit 0 ;; + exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; + exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit 0 ;; + exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix - exit 0 ;; + exit ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu - exit 0 ;; + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -875,8 +868,12 @@ #endif #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; mips64:Linux:*:*) eval $set_cc_for_build @@ -894,15 +891,22 @@ #endif #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu - exit 0 ;; + exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu - exit 0 ;; + exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; @@ -916,7 +920,7 @@ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit 0 ;; + exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in @@ -924,25 +928,28 @@ PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac - exit 0 ;; + exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu - exit 0 ;; + exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux - exit 0 ;; + exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu - exit 0 ;; + exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent @@ -960,15 +967,15 @@ ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 ;; + exit ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 ;; + exit ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit 0 ;; + exit ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build @@ -985,7 +992,7 @@ LIBC=gnulibc1 # endif #else - #ifdef __INTEL_COMPILER + #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) LIBC=gnu #else LIBC=gnuaout @@ -995,16 +1002,23 @@ LIBC=dietlibc #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 - test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^LIBC/{ + s: ::g + p + }'`" + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 - exit 0 ;; + exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... @@ -1012,27 +1026,27 @@ # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; + exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx - exit 0 ;; + exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop - exit 0 ;; + exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos - exit 0 ;; - i*86:syllable:*:*) + exit ;; + i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable - exit 0 ;; + exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; + exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then @@ -1040,15 +1054,16 @@ else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi - exit 0 ;; - i*86:*:5:[78]*) + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit 0 ;; + exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi - exit 0 ;; + exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv - exit 0 ;; + exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv - exit 0 ;; + exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix - exit 0 ;; + exit ;; M68*:*:R3V[5678]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; + && { echo i486-ncr-sysv4; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 - exit 0 ;; + exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; + exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 - exit 0 ;; + exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 - exit 0 ;; + exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` @@ -1140,68 +1155,72 @@ else echo ns32k-sni-sysv fi - exit 0 ;; + exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 - exit 0 ;; + exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 - exit 0 ;; + exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 - exit 0 ;; + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos - exit 0 ;; + exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; + exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 - exit 0 ;; + exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi - exit 0 ;; + exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos - exit 0 ;; + exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos - exit 0 ;; + exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos - exit 0 ;; + exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Darwin:*:*) - case `uname -p` in - *86) UNAME_PROCESSOR=i686 ;; - powerpc) UNAME_PROCESSOR=powerpc ;; + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit 0 ;; + exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then @@ -1209,22 +1228,25 @@ UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit 0 ;; + exit ;; *:QNX:*:4*) echo i386-pc-qnx - exit 0 ;; + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} - exit 0 ;; + exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux - exit 0 ;; + exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv - exit 0 ;; + exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 @@ -1235,31 +1257,47 @@ UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 - exit 0 ;; + exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 - exit 0 ;; + exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex - exit 0 ;; + exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 - exit 0 ;; + exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 - exit 0 ;; + exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 - exit 0 ;; + exit ;; *:ITS:*:*) echo pdp10-unknown-its - exit 0 ;; + exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} - exit 0 ;; + exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit 0 ;; + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 @@ -1291,7 +1329,7 @@ #endif #if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); + printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) @@ -1380,11 +1418,12 @@ } EOF -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) @@ -1393,22 +1432,22 @@ case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd - exit 0 ;; + exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit 0 ;; + exit ;; c34*) echo c34-convex-bsd - exit 0 ;; + exit ;; c38*) echo c38-convex-bsd - exit 0 ;; + exit ;; c4*) echo c4-convex-bsd - exit 0 ;; + exit ;; esac fi @@ -1419,7 +1458,9 @@ the operating system you are using. It is advised that you download the most up to date version of the config scripts from - ftp://ftp.gnu.org/pub/gnu/config/ + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess +and + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub If the version you run ($0) is already up to date, please send the following data and any information you think might be --- wput-0.6.orig/debian/docs +++ wput-0.6/debian/docs @@ -0,0 +1,6 @@ +doc/USAGE.examples +doc/USAGE.resumehandling +doc/USAGE.urlhandling +doc/passwordfile +doc/wputrc +TODO --- wput-0.6.orig/debian/changelog +++ wput-0.6/debian/changelog @@ -0,0 +1,46 @@ +wput (0.6-1build1) feisty; urgency=low + + * Rebuild to depend on libgnutls13 and not libgnutls12 + + -- Vassilis Pandis Fri, 22 Dec 2006 17:41:17 +0200 + +wput (0.6-1) unstable; urgency=low + + * New upstream release. + * debian/control: + + Updated to Standards-Version 3.7.2. + + Added libgnutls-dev Build-Depends. + * doc/wput.1: + + Fixed hyphen-used-as-minus-sign in manpage. + + Fixed version number in manpage. + + -- Khalid El Fathi Mon, 3 Jul 2006 14:38:17 +0200 + +wput (0.5-3) unstable; urgency=low + + * debian/control: Updated to Standards-Version 3.6.2 and download location. + * debian/copyright: Updated download location and address of Free Software + Foundation. + + -- Khalid El Fathi Wed, 31 Aug 2005 21:48:44 +0200 + +wput (0.5-2) unstable; urgency=low + + * Bug fix: "Typo in description times-tamping->time-stamping" + (Closes: #310896). + + -- Khalid El Fathi Thu, 16 Jun 2005 10:10:57 +0200 + +wput (0.5-1) unstable; urgency=low + + * New upstream release + + -- Khalid El Fathi Mon, 6 Dec 2004 23:57:25 +0100 + +wput (0.4.1-1) unstable; urgency=low + + * Initial Release (Closes: bug#276991). + * This is my first Debian package. ;) + + -- Khalid El Fathi Sun, 17 Oct 2004 23:52:51 +0200 + --- wput-0.6.orig/debian/control +++ wput-0.6/debian/control @@ -0,0 +1,18 @@ +Source: wput +Section: web +Priority: optional +Maintainer: Khalid El Fathi +Build-Depends: debhelper (>= 4.0.0), libgnutls-dev +Standards-Version: 3.7.2 + +Package: wput +Architecture: any +Depends: ${shlibs:Depends} +Description: A tiny wget-like ftp-client for uploading files + Wput is a tiny ftp-client, that uploads files or directories to a + remote ftp-server. + . + Main features are: resuming, time-stamping, wget-like interface, + proxy-support and speed-limit. + . + Homepage: http://wput.sourceforge.net/ --- wput-0.6.orig/debian/copyright +++ wput-0.6/debian/copyright @@ -0,0 +1,25 @@ +This package was debianized by Khalid El Fathi on +Sun, 17 Oct 2004 23:52:51 +0200. + +It was downloaded from http://wput.sourceforge.net/ + +Copyright Holder: Hagen Fritsch + +License: + + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this package; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +On Debian systems, the complete text of the GNU General +Public License can be found in `/usr/share/common-licenses/GPL'. --- wput-0.6.orig/debian/compat +++ wput-0.6/debian/compat @@ -0,0 +1 @@ +4 --- wput-0.6.orig/debian/dirs +++ wput-0.6/debian/dirs @@ -0,0 +1,2 @@ +usr/bin +usr/share/man/man1 --- wput-0.6.orig/debian/rules +++ wput-0.6/debian/rules @@ -0,0 +1,111 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + + +# These are used for cross-compiling and for saving the configure script +# from having to guess our platform (since we know it already) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) + + +CFLAGS = -Wall -g + +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif + +config.status: configure + dh_testdir + # Add here commands to configure the package. + CFLAGS="$(CFLAGS)" ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info + + +build: build-stamp + +build-stamp: config.status + dh_testdir + + # Add here commands to compile the package. + $(MAKE) + #docbook-to-man debian/wput.sgml > wput.1 + + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + rm -f $(CURDIR)/config.status + + # Add here commands to clean up after the build process. + -$(MAKE) distclean +ifneq "$(wildcard /usr/share/misc/config.sub)" "" + cp -f /usr/share/misc/config.sub config.sub +endif +ifneq "$(wildcard /usr/share/misc/config.guess)" "" + cp -f /usr/share/misc/config.guess config.guess +endif + + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + # Add here commands to install the package into debian/wput. + #$(MAKE) install prefix=$(CURDIR)/debian/wput/usr + install $(CURDIR)/wput $(CURDIR)/debian/wput/usr/bin + gzip -9c $(CURDIR)/doc/wput.1 > $(CURDIR)/doc/wput.1.gz + install $(CURDIR)/doc/wput.1.gz $(CURDIR)/debian/wput/usr/share/man/man1/ + + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_installchangelogs ChangeLog + dh_installdocs +# dh_installexamples +# dh_install +# dh_installmenu +# dh_installdebconf +# dh_installlogrotate +# dh_installemacsen +# dh_installpam +# dh_installmime +# dh_installinit +# dh_installcron +# dh_installinfo + dh_installman +# dh_link + dh_strip + dh_compress + dh_fixperms +# dh_perl +# dh_python +# dh_makeshlibs + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install