--- xinetd-2.3.14.orig/debian/xinetd.conf +++ xinetd-2.3.14/debian/xinetd.conf @@ -0,0 +1,14 @@ +# Simple configuration file for xinetd +# +# Some defaults, and include /etc/xinetd.d/ + +defaults +{ + +# Please note that you need a log_type line to be able to use log_on_success +# and log_on_failure. The default is the following : +# log_type = SYSLOG daemon info + +} + +includedir /etc/xinetd.d --- xinetd-2.3.14.orig/debian/NEWS +++ xinetd-2.3.14/debian/NEWS @@ -0,0 +1,19 @@ +xinetd (1:2.3.14-6) unstable; urgency=low + + Thanks to David Madore, xinetd now is able to listen on IPv6 addresses for + inetd.conf compatibility layer. This is now the new default mode for xinetd + in Debian. + + -- Pierre Habouzit Mon, 24 Mar 2008 12:50:42 +0100 + +xinetd (1:2.3.14-3) unstable; urgency=low + + This version enables inetd_compat mode by default, so that we can pretend to + be a real inet-superserver. This way, packages that use update-inetd will + work with xinetd properly. The inetd_compat mode is forced for new + installations only, and can be tweaked in /etc/default/xinetd. + + Note that if the same service is configured in /etc/xinetd.d/ and in + /etc/inetd.conf, the former takes precedence, based on the service id. + + -- Pierre Habouzit Tue, 27 Nov 2007 01:55:29 +0100 --- xinetd-2.3.14.orig/debian/README.Debian +++ xinetd-2.3.14/debian/README.Debian @@ -0,0 +1,17 @@ +README.Debian for xinetd +======================== + + xinetd in debian is supposed to work with -inetd_compat enabled (you can + tweak that in /etc/default/xinetd). + + Package maintainers that support xinetd in addition to xinetd, will drop + files in /etc/xinetd.d/ _and_ add entries in /etc/inetd.conf, + enabling them using update-inetd. + + If both an xinetd service configuration id and an entry in /etc/inetd.conf + match, the xinetd one will hide the inetd.conf one, even if disabled. This + trick is built to simplify the logic in update-inetd, and let the + administrators only touch xinetd configuration and don't have + /etc/inetd.conf mess with that they changed behind their back. + + -- Pierre Habouzit Wed, 28 Nov 2007 11:55:48 +0100 --- xinetd-2.3.14.orig/debian/xinetd.install +++ xinetd-2.3.14/debian/xinetd.install @@ -0,0 +1,2 @@ +debian/xinetd.conf etc/ +debian/xinetd.d etc/ --- xinetd-2.3.14.orig/debian/compat +++ xinetd-2.3.14/debian/compat @@ -0,0 +1 @@ +5 --- xinetd-2.3.14.orig/debian/xinetd.init +++ xinetd-2.3.14/debian/xinetd.init @@ -0,0 +1,77 @@ +#!/bin/sh +### BEGIN INIT INFO +# Provides: inetd +# Required-Start: $local_fs $remote_fs +# Required-Stop: $local_fs $remote_fs +# Should-Start: $syslog +# Should-Stop: $syslog +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Start or stop the xinetd daemon. +### END INIT INFO + +# clear poisonned environment +unset TMPDIR + +NAME=xinetd +DAEMON=/usr/sbin/$NAME +PIDFILE=/var/run/$NAME.pid + +test -x "$DAEMON" || exit 0 + +test -e /etc/default/$NAME && . /etc/default/$NAME +case "$INETD_COMPAT" in + [Yy]*) + XINETD_OPTS="$XINETD_OPTS -inetd_compat" + if perl -MSocket -e 'exit (!socket($sock, AF_INET6, SOCK_STREAM, 0))'; then + XINETD_OPTS="$XINETD_OPTS -inetd_ipv6" + fi + ;; +esac + +. /lib/lsb/init-functions + +checkportmap () { + if grep "^[^ *#]" /etc/xinetd.conf | grep -q 'rpc/'; then + if ! rpcinfo -u localhost portmapper >/dev/null 2>&1; then + echo + echo "WARNING: portmapper inactive - RPC services unavailable!" + echo " Commenting out or removing the RPC services from" + echo " the /etc/xinetd.conf file will remove this message." + echo + fi + fi +} + +case "$1" in + start) + checkportmap + log_daemon_msg "Starting internet superserver" "$NAME" + start-stop-daemon --start --quiet --background --exec "$DAEMON" -- \ + -pidfile "$PIDFILE" $XINETD_OPTS + log_end_msg $? + ;; + stop) + log_daemon_msg "Stopping internet superserver" "$NAME" + start-stop-daemon --stop --signal 3 --quiet --oknodo --exec "$DAEMON" + log_end_msg $? + ;; + reload) + log_daemon_msg "Reloading internet superserver configuration" "$NAME" + start-stop-daemon --stop --signal 1 --quiet --oknodo --exec "$DAEMON" + log_end_msg $? + ;; + restart|force-reload) + $0 stop + $0 start + ;; + status) + status_of_proc -p "$PIDFILE" "$DAEMON" xinetd && exit 0 || exit $? + ;; + *) + echo "Usage: /etc/init.d/xinetd {start|stop|reload|force-reload|restart|status}" + exit 1 + ;; +esac + +exit 0 --- xinetd-2.3.14.orig/debian/README.update-inetd +++ xinetd-2.3.14/debian/README.update-inetd @@ -0,0 +1,72 @@ +(Lack of) update-inetd functionality with xinetd +------------------------------------------------ + +The update-inetd script is used by Debian packages which rely on inetd. The +purpose of the script is to update /etc/inetd.conf so that the network +service(s) provided by the package in question are added or enabled. + +Beginning with 1:2.3.11-2, xinetd is shipped with an optional inetd.conf +compatibility mode. That is, xinetd reads xinetd.conf, then inetd.conf and +adds services accordingly. So, when this mode is used, and that a service +is added by update-inetd to inetd.conf, xinetd can be reloaded, and the +service becomes available through xinetd, without an xinetd.conf +modification. + +To enable the inetd.conf compatibility mode, you can edit +/etc/default/xinetd and add -inetd_compat or -inetd_ipv6 to XINETD_OPTS + +However, you will want to put some services' configurations in xinetd.conf to +customize them. + +Since the update-inetd script currently does not modify /etc/xinetd.conf, +instead telling the user to do this manually, there are two ways of converting +your inetd.conf file into xinetd.conf file : either with the xconv.pl script, +or with the itox program, both provided by xinetd. + + + * Using itox + + The following command will output the appropriate xinetd.conf entry for + this service, so you can add the output to xinetd.conf yourself: + + echo "line from /etc/inetd.conf" | itox + + However, if the service uses a daemon such as /usr/sbin/tcpd, then this + should be specified using the "-daemon_dir" option. This example: + + echo "smtp stream tcp nowait root /usr/sbin/tcpd /usr/sbin/in.smtpd" \ + | itox -daemon_dir /usr/sbin/tcpd + + would produce this: + + service smtp + { + socket_type = stream + protocol = tcp + wait = no + user = root + server = /usr/sbin/in.smtpd + } + + * Using xconv.pl + + Mostly everything said above, regarding itox, also applies to xconv.pl - + the only difference is that xconv.pl is a Perl script, a bit newer than + than itox, and made exactly for the purpose of converting whole + inetd.conf file into xinetd.conf file. It's best to invoke it this way: + + xconv.pl < /etc/inetd.conf > /etc/xinetd.conf + + This will read the whole inetd.conf file and create full xinetd.conf + file. + +You should also read the inetd.conf and xinetd.conf manual pages, and this will +hopefully make more sense. + +Work is currently being done on a new update-inetd which will automatically +take care of everything, but that hasn't been implemented just yet. + + + -- Norbert Veber Tue, 9 June 1998 22:18:25 -0500 + Josip Rodin Wed, 20 Oct 1999 20:56:07 +0200 + Thomas Seyrat Fri, 15 Aug 2003 17:39:58 +0200 --- xinetd-2.3.14.orig/debian/xinetd.prerm +++ xinetd-2.3.14/debian/xinetd.prerm @@ -0,0 +1,13 @@ +#!/bin/sh -e + +if [ -x "`which invoke-rc.d 2>/dev/null`" ]; then + invoke-rc.d xinetd stop +elif [ -x /etc/init.d/xinetd ]; then + /etc/init.d/xinetd stop +fi + +if [ "$1" = "remove" ]; then + echo "Note: all inetd services have been terminated." +fi + +#DEBHELPER# --- xinetd-2.3.14.orig/debian/xinetd.postinst +++ xinetd-2.3.14/debian/xinetd.postinst @@ -0,0 +1,17 @@ +#!/bin/sh -e + +if test "$1" = "configure"; then + if dpkg --compare-versions "$2" lt-nl 1:2.3.14-3; then + sed -i -e "s/INETD_COMPAT=Yes/INETD_COMPAT=No/" /etc/default/xinetd + fi +fi + +if [ -x "`which invoke-rc.d 2>/dev/null`" ]; then + invoke-rc.d xinetd stop +elif [ -x /etc/init.d/xinetd ]; then + /etc/init.d/xinetd stop >&2 +else + start-stop-daemon --quiet --stop --signal 3 --oknodo --exec /usr/sbin/xinetd +fi + +#DEBHELPER# --- xinetd-2.3.14.orig/debian/copyright +++ xinetd-2.3.14/debian/copyright @@ -0,0 +1,61 @@ +xinetd was first debianized by Boris D. Beletsky, and later maintained +by Adam Heath and Norbert Veber. Josip Rodin maintained it for a while, +then Daniel Silverstone. +It is currently maintained by Thomas Seyrat . + +Original source may be found at: http://synack.net/xinetd/ +Another useful URL is http://www.xinetd.org/ + +Upstream maintainer is: Rob Braun + +This software is + +(c) Copyright 1992 by Panagiotis Tsirigotis + +The author (Panagiotis Tsirigotis) grants permission to use, copy, +and distribute this software and its documentation for any purpose +and without fee, provided that the above copyright notice extant in +files in this distribution is not removed from files included in any +redistribution and that this copyright notice is also included in any +redistribution. + +Modifications to this software may be distributed, either by distributing +the modified software or by distributing patches to the original software, +under the following additional terms: + +1. The version number will be modified as follows: + a. The first 3 components of the version number + (i.e ..) will remain unchanged. + b. A new component will be appended to the version number to indicate + the modification level. The form of this component is up to the + author of the modifications. + +2. The author of the modifications will include his/her name by appending it + along with the new version number to this file and will be responsible for + any wrong behavior of the modified software. + +The author makes no representations about the suitability of this +software for any purpose. It is provided "as is" without any express +or implied warranty. + + +Modifications: +Version: 2.1.8.7-current +Copyright 1998-2001 by Rob Braun + +Sensor Addition +Version: 2.1.8.9pre14a +Copyright 2001 by Steve Grubb + +This is an exerpt from an email I received from the original author, allowing +xinetd as maintained by me, to use the higher version numbers: + + I appreciate your maintaining the version string guidelines as specified + in the copyright. But I did not mean them to last as long as they did. + + So, if you want, you may use any 2.N.* (N >= 3) version string for future + xinetd versions that you release. Note that I am excluding the 2.2.* line; + using that would only create confusion. Naming the next release 2.3.0 + would put to rest the confusion about 2.2.1 and 2.1.8.*. + +(by Rob Braun) --- xinetd-2.3.14.orig/debian/xinetd.org-FAQ.html +++ xinetd-2.3.14/debian/xinetd.org-FAQ.html @@ -0,0 +1,263 @@ + + +xinetd faq + + +

xinetd FAQ

+
+ +
+
What is xinetd +
Is it compatible with inetd ? +
Why should I use xinetd? +
Who is responsible for xinetd? +
What's up with xinetd 2.2.1? +
I am not a system administrator; what do I care about an inetd replacement ? +
Where can I get xinetd? +
Has anyone gotten xinetd working with qmail? +
What platforms does xinetd work on? +
How do I use itox? +
Does xinetd support tcpwrappers? +
Does xinetd support IPv6? +
No services start with IPv6! What's the deal? +
What's this setgroups(0, NULL) error? +
Why can't telnetd start normally on Linux? +
How can I use xinetd to wrap SSL around services? +
How do I setup a cvs server with xinetd? +
+
+Q. What is xinetd ?
 +A. xinetd is a replacement for inetd, the internet services daemon.
+
+Q: I am not a system administrator; what do I care about an inetd replacement ? +
+A: xinetd is not just an inetd replacement. Anybody can use it to start servers + that don't require privileged ports because xinetd does not require that the + services in its configuration file be listed in /etc/services. +
+
+Q. Is it compatible with inetd ?
 +A. No, its configuration file has a different format than inetd's one + and it understands different signals. However the signal-to-action + assignment can be changed and a program has been included to convert + inetd.conf to xinetd.conf. +
+
+
+Q. Why should I use it ?
 +A. Because it is a lot better (IMHO) than inetd. Here are the reasons: +
+
+
+
1) It can do access control on all services based on: +
+
a. address of remote host +
b. time of access +
c. name of remote host +
d. domain name of remote host +
+
2) Access control works on all services, whether multi-threaded or + single-threaded and for both the TCP and UDP protocols. + All UDP packets can be checked as well as all TCP connections. + +
3) It provides hard reconfiguration: +
+
a. kills servers for services that are no longer in the + configuration file +
b. kills servers that no longer meet the access control criteria +
+
4) It can prevent denial-of-access attacks by +
+
a. placing limits on the number of servers for each service + (avoids process table overflows) +
b. placing an upper bound on the number of processes it will fork +
c. placing limits on the size of log files it creates +
d. placing limits on the number of connection a single host can initiate +
e. place limits on the rate of incoming connections +
f. discontinue services if the load exceeds specified limit +
+
5) Extensive logging abilities: +
+
a. for every server started it can log: +
+
i) the time when the server was started +
ii) the remote host address +
iii) who was the remote user (if the other end runs a + RFC-931/RFC-1413 server) +
iv) how long the server was running +
(i, ii and iii can be logged for failed attempts too). +
+
b. for some services, if the access control fails, it can + log information about the attempted access (for example, + it can log the user name and command for the rsh service) +
+
6) No limit on number of server arguments +
7) You can bind specifc services to specific IP's on your host machine +
+
+
+Q. Whom should I thank/blame for this program ?
 +A. panos@cs.colorado.edu originally wrote this program, but +I am fielding +bug reports at this time. +
+
+Q. What's up with 2.2.1 version of xinetd? +
+A. The most recent original version of xinetd was 2.1.1 with patches bringing it up to 2.1.8. Nick Hilliard created xinetd 2.2.1, based off an unreleased xinetd 2.2.0 by Panos. The copyright included with xinetd specified the required versioning to be the official release of xinetd (2.1.8 in this case) and a fourth version number tacked on to indicate the modification level. This is the versioning I have adopted. xinetd 2.1.8.X, which is available here, is not based off xinetd 2.2.0 or higher. It was created from the codebase of xinetd 2.1.8, although I have re-implemented some of the features introduced in xinetd-2.2.1. +
+
+Q. Where can I find the latest-and-greatest version ?
 +A. The xinetd source can be obtained from +http://www.synack.net/xinetd +
+
+Q. Has anyone been able to get qmail working with xinetd?
 +A. yes, here is the entry info +
+service smtp
+{
+        flags           = REUSE NAMEINARGS
+        socket_type     = stream
+        protocol        = tcp
+        wait            = no
+        user            = qmaild
+        server          = /usr/sbin/tcpd
+        server_args     = /var/qmail/bin/tcp-env -R /var/qmail/bin/qmail-smtpd
+}
+
Contributed by: Anthony Abby
+This method will allow you to set environment variables and whatnot +in /etc/hosts.allow. Although xinetd can be compiled with libwrap +support, this doesn't mean it can completly replace tcpd's functionality. +xinetd calls host_access(), which performs the access control +documented in host_access(5) man page. This is a subset of the +features offered by tcpd. +
+
+Q. What platforms is xinetd know to work on?
 +A. I have run it on Solaris 2.6 (sparc and x86), Linux, BSDi, and +IRIX 5.3 and 6.2. The original package ran on SunOS 4 and Ultrix. +
+
+Q. How to do setup a chrooted environment for a service?
+A. Here is the config file entry: +
+service telnet_chroot
+{
+        log_on_success  = HOST PID DURATION USERID
+        log_on_failure 	= HOST RECORD USERID
+	no_access 	= 152.30.11.93
+        socket_type     = stream
+        protocol        = tcp
+	port 		= 8000
+        wait            = no
+        user            = root
+        server          = /usr/sbin/chroot
+	server_args 	= /var/public/servers /usr/libexec/telnetd
+}
+
Contributed by: lburns@sasquatch.com +
+
+Q. How do I use itox?
+A. itox reads in a regular inetd.conf file from stdin and writes an xinetd.conf +file to stdout. In general, you use the command:
+itox < /etc/inetd.conf > /etc/xinetd.conf +
+If your inetd.conf does not have explicit paths to each of the +daemons, you must use the -daemon_dir option. Suppose all your +daemons live in /usr/sbin, use the following command:
+ itox -daemon_dir=/usr/sbin < /etc/inetd.conf > /etc/xinetd.conf +
+itox is rather old and hasn't been updated for a while. xconv.pl is a +perl script that is a little better about converting modern inetd.conf +files. It's usage is similar to itox's. +
+
+Q. Does xinetd support libwrap (tcpwrappers)?
+A. Yes. xinetd can be compiled with libwrap support by passing +--with-libwrap as an option to the configure script. +When xinetd is compiled with libwrap support, all services can use the +/etc/hosts.allow and /etc/hosts.deny access control. +xinetd can also be configured to use tcpd in the traditional inetd style. +This requires the use of the NAMEINARGS flag, and the name of the real +daemon be passed in as server_args. Here is an example for using telnet +with tcpd: +
+service telnet
+{
+	flags       = REUSE NAMEINARGS
+	protocol    = tcp
+	socket_type = stream
+	wait        = no
+	user        = telnetd
+	server      = /usr/sbin/tcpd
+	server_args = /usr/sbin/in.telnetd
+}
+
+Q. Does xinetd support IPv6?
+A. Yes. xinetd can be compiled with IPv6 support by adding the +--with-inet6 option to the configure script. +Access control is functional with IPv6. You can use ipv4 mapped +addresses, or give normal dotted quad ipv4 addresses for access +control, and xinetd will map them to ipv6 addresses. +
+
+Q. No services start with IPv6! What's the deal?
+A. When you compile IPv6 support in, all sockets are IPv6 sockets. +If your kernel doesn't understand what an IPv6 socket is, all attempts +to create sockets will fail, and no services will start. Only compile +xinetd with IPv6 support if your kernel supports IPv6. +
+
+Q. What's this setgroups(0, NULL) error?
+A. By default, xinetd does not allow group permissions to the server +processes, and it does this by setting the groups of the child process +to nothing. Some BSD's have a problem with this. To avoid this error, +put the directive groups = yes into your services. This says +to allow the server process to have all the group privleges entitled +to the user the server process is running as. +
+
+Q. Why can't telnetd start normally on Linux?
+A. On some Linux distributions, the telnet daemon starts as a nonprivleged +user, but the user belongs to groups that allow it to open new tty's, and +to update utmp. By default, xinetd does not allow group permissions to the +server process, so telnetd can fail to start properly. To get the server +process to posess the proper groups, use the groups = yes directive +for the telnet service. This will tell xinetd that it is OK for the server +process to start with all the groups the user has access to. +
+
+Q. How do I use xinetd to wrap SSL around services
+A. Use the program +stunnel to wrap SSL around services. This can actually be used +by an inetd. +
+
+Q. How do I setup a cvs server with xinetd? +
+A. A user wrote in with this suggestion:
+
+cvspserver  stream tcp nowait root /usr/bin/cvs cvs --allow-root=/home/pauljohn/cvsroot  --allow-root=/home/pauljohn/cvsmisc pserver
+
+If you want to make the same work under xinetd, you save a config file +in /etc/xinetd.d +called cvspserver, (where the last line tells it the names of your +repositories): +
+service cvspserver
+{
+	socket_type         = stream
+	protocol            = tcp
+	wait                = no
+	user                = root
+	passenv             = 
+	server              = /usr/bin/cvs
+	server_args         = --allow-root=/home/pauljohn/cvsroot --allow-root=/home/pauljohn/cvsmisc pserver -f
+}
+
+All the other cvs setup stuff is the same. This seems to work, afaik. +
+
+ + --- xinetd-2.3.14.orig/debian/xinetd.dirs +++ xinetd-2.3.14/debian/xinetd.dirs @@ -0,0 +1 @@ +etc/xinetd.d --- xinetd-2.3.14.orig/debian/rules +++ xinetd-2.3.14/debian/rules @@ -0,0 +1,105 @@ +#!/usr/bin/make -f +export DEB_BUILD_HARDENING=1 + +CFLAGS=-Wall -Wextra -g $(if $(findstring noopt,$(DEB_BUILD_OPTIONS)),-O0,-O2) +tmp = $(CURDIR)/debian/xinetd + +srcpkg = $(shell dpkg-parsechangelog | sed -ne 's/Source: *//p') +srcver = $(shell dpkg-parsechangelog | sed -ne 's/Version: *\(.*:\)\?\(.*\)-[0-9.]*$$/\2/p') +pkgdir = '$(CURDIR)'/debian/xinetd +#{{{ generic rules + +../$(srcpkg)_$(srcver).orig.tar.gz: + @if git rev-parse --git-dir >/dev/null 2>&1; then \ + echo -n 'Regenerating $(@F)'; \ + git show pristine-tar:$(@F).delta | pristine-tar gentar - $@; \ + echo .; \ + fi + +check-tarball: ../$(srcpkg)_$(srcver).orig.tar.gz + +.PHONY: check-tarball + +#}}} +#{{{ maintainer stuff + +refresh-patches: check-tarball + @dh_testdir + @echo 'refreshing debian/patches:' + @rm -rf '$(CURDIR)'/debian/patches + @mkdir -p '$(CURDIR)'/debian/patches + @cd '$(CURDIR)'/debian/patches && git format-patch upstream..upstream+patches + @echo . + +#}}} + +patch: patch-stamp check-tarball +patch-stamp: + dh_testdir + set -e; test -e patch-stamp || \ + for i in `ls -1 debian/patches/*.patch || :`; do patch -p1 <$$i > /dev/null; done + touch $@ + +unpatch: + dh_testdir + set -e; ! test -e patch-stamp || \ + for i in `ls -1r debian/patches/*.patch || :`; do patch -p1 -R <$$i > /dev/null; done + rm -f patch-stamp + +configure: configure-stamp +configure-stamp: patch + dh_testdir + cp /usr/share/misc/config.* '$(CURDIR)' + CFLAGS="-O2" ./configure --prefix=/usr \ + --mandir=\$${prefix}/share/man \ + --infodir=\$${prefix}/share/info \ + --host=$(DEB_HOST_GNU_TYPE) \ + --build=$(DEB_BUILD_GNU_TYPE) \ + \ + --with-loadavg \ + --with-libwrap + touch $@ + +build: configure-stamp build-stamp +build-stamp: + dh_testdir + $(MAKE) + touch $@ + +clean: unpatch + dh_testdir + dh_testroot + ! test -e Makefile || $(MAKE) distclean + rm -f build-stamp configure-stamp + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + $(MAKE) install prefix=$(pkgdir)/usr + +binary-indep: build install + +binary-arch: build install + dh_testdir + dh_testroot + dh_installchangelogs CHANGELOG + dh_installdocs README debian/README.update-inetd debian/xinetd.org-FAQ.html + dh_installexamples xinetd/sample.conf + dh_installinit -r + dh_installdebconf + dh_install + dh_strip + dh_compress + dh_fixperms + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch + +.PHONY: patch build clean binary-indep binary-arch binary install configure --- xinetd-2.3.14.orig/debian/xinetd.default +++ xinetd-2.3.14/debian/xinetd.default @@ -0,0 +1,12 @@ +# Default settings for xinetd. This file is sourced by /bin/sh from +# /etc/init.d/xinetd + +# enable xinetd Inetd compat mode +INETD_COMPAT=Yes + +# Options to pass to xinetd +# +# -stayalive comes by default : it can be removed if xinetd is expected +# not to start when no service is configured +# +XINETD_OPTS="-stayalive" --- xinetd-2.3.14.orig/debian/control +++ xinetd-2.3.14/debian/control @@ -0,0 +1,30 @@ +Source: xinetd +Section: net +Priority: extra +Maintainer: Ubuntu Core Developers +XSBC-Original-Maintainer: Pierre Habouzit +Standards-Version: 3.7.3 +Build-Depends: debhelper (>> 5.0.0), libwrap0-dev, autotools-dev, lsb-base, hardening-wrapper +Vcs-Git: git://git.madism.org/packages/xinetd.git +Vcs-Browser: http://git.madism.org/?p=packages/xinetd.git +Homepage: http://www.xinetd.org + +Package: xinetd +Architecture: any +Depends: ${shlibs:Depends}, netbase, update-inetd, lsb-base (>= 3.2-14) +Provides: inet-superserver +Conflicts: inet-superserver +Recommends: sysklogd | system-log-daemon, logrotate +Description: replacement for inetd with many enhancements + xinetd has access control mechanisms, extensive logging capabilities, + the ability to make services available based on time, and can place + limits on the number of servers that can be started, among other things. + . + It has the ability to redirect TCP streams to a remote host and port. + This is useful for those of that use IP masquerading, or NAT, and want + to be able to reach your internal hosts. + . + It also has the ability to bind specific services to specific interfaces. + This is useful when you want to make services available for your internal + network, but not the rest of the world. Or to have a different service + running on the same port, but different interfaces. --- xinetd-2.3.14.orig/debian/changelog +++ xinetd-2.3.14/debian/changelog @@ -0,0 +1,645 @@ +xinetd (1:2.3.14-7ubuntu3) lucid; urgency=low + + * rebuild rest of main for armel armv7/thumb2 optimization; + UbuntuSpec:mobile-lucid-arm-gcc-v7-thumb2 + + -- Alexander Sack Sun, 07 Mar 2010 01:11:56 +0100 + +xinetd (1:2.3.14-7ubuntu2) karmic; urgency=low + + * debian/{control,rules}: add and enable hardened build for PIE + (Debian bug 542729). + + -- Kees Cook Thu, 20 Aug 2009 17:55:39 -0700 + +xinetd (1:2.3.14-7ubuntu1) intrepid; urgency=low + + * debian/control: Add Depend on lsb >= 3.2-14, which has the + status_of_proc() function. + * debian/xinetd.init: Add the 'status' action (LP: #251975). + + -- Andres Rodriguez Fri, 25 Jul 2008 13:10:34 -0500 + +xinetd (1:2.3.14-7) unstable; urgency=low + + * Update init.d to test if ipv6 support is built in the kernel before + activating it by default (Closes: 472755). + + -- Pierre Habouzit Wed, 26 Mar 2008 17:46:54 +0100 + +xinetd (1:2.3.14-6) unstable; urgency=low + + * Add patch from David Madore so that xinetd groks an -inetd_ipv6 mode, that + works like -inetd_compat but also listen on IPv6 addresses. + (Closes: 472436). + + * debian/control: + + Bump standards-version to 3.7.3. + + update VCS-{Git,Browser} fields to reflect the reality. + + Fix Homepage field (http:// prefix was missing). + + -- Pierre Habouzit Mon, 24 Mar 2008 12:48:39 +0100 + +xinetd (1:2.3.14-5) unstable; urgency=medium + + * woops fix wrong ordering of the sed arguments, thanks to madduck. + (Closes: 453371). + + -- Pierre Habouzit Thu, 29 Nov 2007 09:29:55 +0100 + +xinetd (1:2.3.14-4) unstable; urgency=low + + * Add Disable-services-with-a-duplicated-id.patch: if a service has the same + id and is configured in both xinetd configuration directories _and_ in + /etc/inetd.conf, the configuration (even if disabled) from xinetd + directories takes precedence. + * /etc/default/xinetd wasn't installed anymore because of a typo: + debian/xinetd.defaults -> debian/xinetd.default. + * debian/xinetd.postrm: don't purge configuration that isn't ours on purge + anymore. + * Don't force inetd_compat for upgrades. + * Update README.Debian with informations wrt -inetd_compat in Debian. + + -- Pierre Habouzit Wed, 28 Nov 2007 12:02:26 +0100 + +xinetd (1:2.3.14-3) unstable; urgency=low + + [ The let's try to provide inet-superserver upload ] + + xinetd has an -inetd_compat mode that renders it suitable for being an + inet-superserver, instead of clumsily divert netkit-inetd. Enabling this + closes: 134955, 188232, 326975, 355417, 373157, 406190, 406660, 448617. + + * debian/NEWS: explain the transition. + + * debian/control: + + add Provides/Conflicts on inet-superserver. + + add dependency on update-inetd. + + add dependency on lsb-base. + + * maintainer scripts: + + preinst: remove diversion of /etc/init.d/inetd. + + other: don't touch /etc/init.d/inetd anymore. + + * debian/xinetd.defaults: enable inetd_compat mode, so that we can + legitimately provide inet-superserver. + + * debian/xinetd.init: + + support the new INETD_COMPAT option. + + be lsb. + + -- Pierre Habouzit Mon, 26 Nov 2007 22:24:09 +0100 + +xinetd (1:2.3.14-2) unstable; urgency=low + + * Adopt package (Closes: 434357), thanks Thomas for your past work. + * debian/control: + + set myself as maintainer. + + add VCS-* headers. + + add Homepage header. + * debian/rules: + + make it slightly more modern. + + use pristine-tar. + + use debian/patches. + * Always use up2date config.{sub,guess}: + + add autotools-dev to the Depends; + + copy config.{guess,sub} from /usr/share/misc/; + * Unset TMPDIR in the initscript (Closes: 379400). + * Capitalize IP in the package Description (Closes: 414288). + * Fix typo in xinetd.conf(5), spurious `+': update + Documentation-fixes.patch (Closes: 413997). + + -- Pierre Habouzit Mon, 26 Nov 2007 18:08:16 +0100 + +xinetd (1:2.3.14-1.1) unstable; urgency=low + + * Non-maintainer upload. + * Update xinetd to use invoke-rc.d (Closes: 427892). + + -- Pierre Habouzit Wed, 18 Jul 2007 18:38:26 +0200 + +xinetd (1:2.3.14-1) unstable; urgency=low + + * New upstream release (closes: #342724). + * Updated config.guess and config.sub (closes: #342448). + * Comment about log_on_* in xinetd.conf (closes: #312663). + * Patch by Leo Weppelman on child.c + (closes: #342559) + * Patch for xconv.pl by Ron Murray to + process "##" lines (closes: #336023). + * Added configuration file for discard internal service + (closes: #309312) + * Bumped Standards-Version to 3.7.2 + * Bumped debhelper compatibility level to 5. + + -- Thomas Seyrat Tue, 9 May 2006 13:32:06 +0200 + +xinetd (1:2.3.13-3) unstable; urgency=low + + * -stayalive option in /etc/default/xinetd instead of init script + to make behaviour change easier. (closes: #294665) + * Applied patch from Andreas Jochens to build + on amd64 with gcc-4.0 (closes: #297911) + * Run /etc/init.d/inetd in postrm only if it exists (closes: #295554) + * Fixed erroneous itox.8 man page (closes: #287814) + * Included xinetd.org FAQ as /usr/share/doc/xinetd/xinetd.org-FAQ.html + * Edited README.update-inetd (closes: #287821) + * Applied patch to xconv.pl by Javier Fernández-Sanguino Peña to fix + - what Amanda needs (closes: #167367) + (http://www.amanda.org/docs/install.html) + - numerically-specified services (closes: #176464) + - TCP Wrappers + + -- Thomas Seyrat Thu, 10 Mar 2005 11:03:24 +0100 + +xinetd (1:2.3.13-2) unstable; urgency=low + + * We now start xinetd with -stayalive by default to keep it + running even if no service is enabled. (closes: #270803) + * Modify Makefile.in to install xinetd.log manpage in section + 5 instead of 8. + + -- Thomas Seyrat Thu, 9 Sep 2004 14:39:20 +0200 + +xinetd (1:2.3.13-1) unstable; urgency=low + + * New upstream release + - fixes factorized addresses in only_from (closes: #212533) + * inetd.conf doesn't get read by default anymore, too much trouble. + Removed -inetd_compat from /etc/default/xinetd (closes: #198585) + * "services" internal service was removed upstream, so we don't + need /etc/xinetd.d/xinetd anymore, nor documentation for these + internal services (closes: #242646) + * Bumped Standards-Version to 3.6.1 + + -- Thomas Seyrat Sun, 18 Apr 2004 13:33:57 +0200 + +xinetd (1:2.3.12-2) unstable; urgency=high + + * -1 was partially fucked up + * Applied patch on nvlists.c from upstream to fix segfault + * Added updated README.update-inetd + * -reuse is not needed anymore since 2.3.4, REUSE is on by default on + all services + * "xadmin" and "servers" internal services were removed upstream, + they don't appear anymore in /etc/xinetd.d/xinetd + * /etc/default/xinetd also gets removed when xinetd is purged + + -- Thomas Seyrat Fri, 15 Aug 2003 16:06:10 +0200 + +xinetd (1:2.3.12-1) unstable; urgency=low + + * New upstream release + * Bumped Standards-Version to 3.6.0 + * Removed README.samba + + -- Thomas Seyrat Thu, 14 Aug 2003 14:21:41 +0200 + +xinetd (1:2.3.11-2) unstable; urgency=low + + * Attempt at using inetd.conf compatibility mode. + - No more "inetd.conf to xinetd.conf" autoconvert, now xinetd + reads inetd.conf after xinetd.conf + - inetd to xinetd transition should be seamless and inetd-started + services are not supposed to be broken (closes: #146908) + - No more debconf (we don't prompt user anymore, we rely on dpkg to + check for an existing xinetd.conf, and to prompt accordingly) + (closes: #183458) + * We install /etc/xinetd.d/, the (disabled) internal services + configuration files (Redhat-style), and the default xinetd.conf + considers them. (closes: #167726) + * Removed logrotate config file (we log through syslog per default) + * Removed logrotate from recommended packages + * Updated and simplified maintainer scripts + * Bumped Standards-Version to 3.5.10 + + -- Thomas Seyrat Mon, 9 Jun 2003 22:50:54 +0200 + +xinetd (1:2.3.11-1) unstable; urgency=high + + * New upstream release + - Steve Grubb fixed memory leaks found with valgrind + (closes: #190217) + * Bumped Standards-Version to 3.5.9 + + -- Thomas Seyrat Sat, 26 Apr 2003 16:26:45 +0200 + +xinetd (1:2.3.10-1) unstable; urgency=low + + * New upstream release + * Bumped Standards-Version to 3.5.8 + * Start daemon with -pidfile /var/run/xinetd.pid (closes: #172770) + + -- Thomas Seyrat Mon, 13 Jan 2003 13:13:42 +0100 + +xinetd (1:2.3.9-1) unstable; urgency=low + + * New upstream release + * Bumped Standards-Version to 3.5.7 + + -- Thomas Seyrat Wed, 2 Oct 2002 10:25:33 +0200 + +xinetd (1:2.3.7-1) unstable; urgency=high + + * New upstream release + - urgency=high to supersede NMU. + - includes security fix corrected in 2.3.6-1.1. + * Applied two patches for 2.3.6 from Steve G. fixing some + "redirect without server line" service issues. (closes: #155990) + + -- Thomas Seyrat Tue, 13 Aug 2002 15:05:05 +0200 + +xinetd (1:2.3.6-1.1) unstable; urgency=high + + * Non-maintainer upload by Security Team + * Applied a patch from SolarDesigner to keep xinetd from leaking the + recently introduced signal pipe into services started from xinetd. + * Applied upstream bugfix to handle IPv6 addresses in config parser + (unfortunately, it was applied upstream to the 2.3.6 tarball which is + now different from ours) + + -- Martin Schulze Tue, 13 Aug 2002 10:44:14 +0200 + +xinetd (1:2.3.6-1) unstable; urgency=low + + * New upstream release (closes: #121044, #149114) + * Removed build dependency on perldoc (upstream now ships xconv.pl manpage). + * Included debconf template french translation. + + -- Thomas Seyrat Mon, 5 Aug 2002 22:17:38 +0200 + +xinetd (1:2.3.5-1) unstable; urgency=low + + * New upstream release + * New maintainer (closes: #153977) + * Minor debian/rules rewriting + * Bumped Standards-Version to 3.5.6.1. + + -- Thomas Seyrat Sun, 28 Jul 2002 16:51:39 +0200 + +xinetd (1:2.3.4-2) unstable; urgency=high + + * The "aarrgghh, why can't upstream test their release?" release + * Three small address parsing fixes -- these are being punted upstream... + xinetd/addr.c:explicit_addr: Set /32 to still be a masked addr + closes: #144672 + xinetd/addr.c:factorized_addr: Restart the parse at the right point + after the syntax check pass. + closes: #141453 + xinetd/addr.c:addrlist_match: Altered the "mask" check to remember to + apply the mask to /both/ halves of the + expression + closes: #145704 + * Small change since I forgot to read the changelog carefully enough... + debian/init: Send HUP to reload config + + -- Daniel Silverstone Fri, 3 May 2002 21:47:35 +0100 + +xinetd (1:2.3.4-1.1) unstable; urgency=low + + * Non-maintainer upload. + * Update config.guess and config.sub (closes: #141653). + + -- Colin Watson Sun, 7 Apr 2002 23:51:53 +0100 + +xinetd (1:2.3.4-1) unstable; urgency=low + + * New upstream version: + Lots and lots. Unsure exactly which bugs + in the debian bts it closes -- I'll need to look + more closely + * Give configure the --with-loadavg parameter. closes: #140619 + + -- Daniel Silverstone Thu, 4 Apr 2002 23:53:54 +0100 + +xinetd (1:2.3.3-4) unstable; urgency=low + + * Corrected reload issue in /etc/init.d/xinetd by making reload + and force-reload the same signal. (follows from removal of + soft reload in 2.3.1) closes: #127676 + + -- Daniel Silverstone Sun, 6 Jan 2002 17:25:45 +0000 + +xinetd (1:2.3.3-3) unstable; urgency=low + + * Integrated fixes to pt_BR template. closes: #120846 + * Integrated fixes to de template + (thanks to Stephan Baeckert of Pyramid Computer GmBH) + * Fixed implicit declaration of malloc() -- This sorts out an ia64 + issue and therefore closes: #124399 + * Fixed spelling mistake in control file (raised by mdz) closes: #125544 + + -- Daniel Silverstone Tue, 18 Dec 2001 08:38:04 +0000 + +xinetd (1:2.3.3-2) unstable; urgency=low + + * Re-introduced debconf independance at the cost + of needing a lintian override. + * Cleared an issue with building on potato WRT pod2man + + -- Daniel Silverstone Tue, 25 Sep 2001 18:52:58 +0100 + +xinetd (1:2.3.3-1) unstable; urgency=high + + * New upstream version + Changes of particular interest include: + o 2.3.1 - Applied Solar Designer's AUDIT patches + - Removed soft-reconfigure. reload is always hard. + o 2.3.2 - Fix a heap overrun issue. + o 2.3.3 - RPC parser works again. + * New Maintainer + * Fixed issue where xinetd.conf stomped on your configs by + making a backup somehow. closes: #110596 + * Removed support for systems without debconf. This introduces + a dependency on debconf - sorry. closes: #90008 + * Introduced a build dependency on perl-doc in order to build the + manpage for xconv.pl + * Provided POD documentation for xconv.pl + * Corrected a dodgy comment in xconv.pl closes: #108754, #108751 + * Included brazilian debconf template translations courtesy of + Andre Luis Lopes closes: #108548 + + -- Daniel Silverstone Fri, 31 Aug 2001 14:49:57 +0100 + +xinetd (1:2.3.0-1) unstable; urgency=high + + * New upstream version (with a sane number, whee!). + * Included the German translation to the templates, closes: #95505. + * Use -reuse by default in the init script, closes: #97732. + * Includes the security fixes that wiggy applied to the stable version, + closes: #101201. + * Now recommends the proper syslogd virtual package, closes: #101629. + * Included the Spanish translation to the templates, closes: #103166. + * Polishing in the packaging. + * Orphaning the package. + + -- Josip Rodin Sun, 15 Jul 2001 02:55:56 +0200 + +xinetd (1:2.1.8.8.p3-2) unstable; urgency=low + + * Added -x checks around lines that kill inetd, portmap, and xinetd init + script, because it can happen that those programs aren't there, + closes: #74759. + * Updated the template message about inetd.conf->xinetd.conf conversion, + closes: #78622. + * Standards-Version: 3.5.2: added DEB_BUILD_OPTIONS handling. + * Added version 2.0.54 to debhelper build-dependency because that's when + dh_installdebconf was introduced. + * Added logrotate among the recommended packages. + + -- Josip Rodin Sat, 17 Mar 2001 16:52:20 +0100 + +xinetd (1:2.1.8.8.p3-1) frozen unstable; urgency=low + + * New upstream version, which includes just a few bugfixes, most of them + that aren't even related to Linux, but there is one which is rather + important: + Fixed a bug in the access lists. If you specified a host by + name in only_from, any connection from a host without + a reverse dns entry would be accepted. + This means that security policies (e.g. denial of access) for such hosts + wouldn't be enforced, which is a very ugly security problem, + closes: #65757. + * Added a clear warning to the postrm in the case when you don't have + an init script for the original inetd anymore, saying you may need + to reinstall netbase package to fix it. As this may happen due to + severe breakage in an old xinetd package, it needs to be said, + closes: #60836. + * Clarified convert-inetd-conf template text to explicitely say that the + config file will get overwritten on every upgrade if you say "Yes" to + the question, and add two lines in postinst to explain how to make it + not regenerate anymore. + * Synced portmapper check with inetd's init script and enhanced the regexp + match to catch " # foo" comments, otherwise it may produce false warning. + * Moved the message about terminating all services to prerm, where it's + actually being done. + * Made update-rc.d run only on initial installs. + * Added debhelper to Build-Depends: and shortened the long description. + + -- Josip Rodin Fri, 16 Jun 2000 20:13:03 +0200 + +xinetd (1:2.1.8.8pre8-1) frozen unstable; urgency=low + + * New upstream version, including only two bug fixes, one of which is a + Y2K fix in the date service (changed TIMEOFFSET macro), closes: #54795. + The second change is minor, a fix for problem when length of banner + name % 32 = 0, and banners fail to work. + + -- Josip Rodin Sun, 16 Jan 2000 17:09:48 +0100 + +xinetd (1:2.1.8.8pre6-1) unstable; urgency=low + + * New upstream version, packaged only to fix the Y2K glitch in the + log file, closes: #53865. + * Adopted/tookover the package :) I hear Norbert is around, but he + hasn't contacted anyone regarding the package yet. + * Introducing debconf support, to ask about converting the config file, + and to warn about update-inetd malfunctioning. However, I didn't remove + the old method of asking the questions yet, just in case debconf + doesn't exist. Only Recommends: debconf. Plus, I had to re-route all + the messages to &2, because of debconf. + * Added the missing `k' in `syslogd' recommendation (doh!). Added + Build-Depends: libwrap0-dev. + * Moved the whole contents of preinst to postinst (that is, stopping of + inetd and portmap, and creating the diversion of inetd init file), + no need to abuse preinst for that. + * Use --background option for start-stop-daemon, to speed up loading, + thus having to depend on dpkg >= 1.4.1.17. + * Fixed some details in postinst, init.d, config, and copyright files. + + -- Josip Rodin Tue, 4 Jan 2000 23:54:08 +0100 + +xinetd (1:2.1.8.7-1) unstable; urgency=low + + * Non-maintainer upload. + * Admitting the sad truth, i.e. marking the package as orphaned. Norbert + hasn't done an upload in some eleven months, and hasn't responded…to + our NMUs and several e-mails in more than two months. :( + * New upstream version. It's from a completely different development + branch, versioned differently, so I had to introduce an epoch. :| + Note that we *have to* use this version because the previous one breaks + its own original license! Closes: #38361 #41386 #41568. + * Updated packaging files for the new autoconf stuff, patched configure.in + and Makefile.in to support install in custom non-existant directories, + included example xinetd.conf file in examples directory. + * Updated docs regarding the new xconv.pl script. Not using it in + postinst, at least not yet. + * Skipped all old patches, except the one for src/itox.c, which is now + forwarded/included in upstream package, with some others. + * Added --with-libwrap to configure flags, to link with libwrap0, as + suggested by the upstream author. From the README file: + When xinetd does access checking, it will first ask libwrap to check + /etc/hosts.allow and /etc/hosts.deny, then if libwrap accepts the + connection, xinetd will consult its own access control mechanism. + * Fixed postrm script to work on purge, and to remove /etc/init.d/inetd + (created in postinst) prior to un-diverting it (otherwise dpkg-divert + would bomb out, overwriting not allowed). + * Moved making the dummy /etc/init.d/inetd script to postinst, to + avoid the lintian error. + * Fixed s/daemon-dir/daemon_dir/ in README.update-inetd file. + * Updated itox.1 manual page, moved it to section 8 and to xinetd/ + directory, and integrated it (and itox) in the Makefile install: rule. + * Updated the init script, made checkportmap() check in /etc/xinetd.conf + file (don't know whether the check is ultimately correct, though). + * Upgraded netbase dependency to 3.16-4, because the fixed update-inetd + script is included since that version. + * Doesn't recommend netstd anymore, apparently it no longer exists, + that closes: #49398 #49438. + + -- Josip Rodin Sat, 16 Oct 1999 19:14:14 +0200 + +xinetd (2.2.1-8.SD1.2) unstable; urgency=low + + * Non-maintainer upload. (diff posted to Bug#45602) + + * Add a dummy /etc/init.d/inetd script so netbase doesn't have to + worry about its files disappearing. (Fixes: Bug#45602) + + -- Anthony Towns Fri, 15 Oct 1999 11:56:03 +1000 + +xinetd (2.2.1-8.SD1.1) unstable; urgency=medium + + * Non-maintainer upload (is Norber Veber MIA?). + * Updated for the new netbase/inetd stuff. + Fixes: #43161 #44537 #44529 #31500 + * Depend on an appropriate netbase version because of the switch to + diverting /etc/init.d/inetd, and not diverting /usr/sbin/update-inetd. + * Un-diverting is done in a sane way, I think. Postinst checks whether the + exact diversion still exists, and preserves the obsolete scripts, with + suffix ".xinetd.old", and then removes the diversion. The obsolete files + made this way are "rm -f"ed in postrm. + * Updated for Policy 3.x. Converted to debhelper for full Policy + compliance. Fixes: #44099 + * Added rm -f /etc/xinetd.conf under purging in postrm, fixes: #36809 + * Included Solar Designer 's SD1 patch from: + ftp://ftp.dataforce.net/pub/solar/xinetd-2.2.1-SD1.diff , fixes: #35166 + * Reworked most of the maintainer scripts. + * The checkportmap() function, from the inetd's init script ought to + be changed to check in /etc/xinetd.conf file. + * Beautified debian/README* files, fixed some oddities in "SEE ALSO" + sections of the man pages. + * If this release doesn't break anything, I'll probably upload the newest + upstream version, from the alive branch. + + -- Josip Rodin Wed, 15 Sep 1999 20:27:55 +0200 + +xinetd (2.2.1-8) frozen unstable; urgency=high + + * Bug #29951, Applied itox patch by Alain Nissen , + it fixes two problems with itox. It now understands user.group + notation, and ignores (no)wait.max. + * Bug #29650, changed a /* */ comment in preinst to a bash # comment :) + * Bug #29945, typo in the itox man page. + * Bug 29648, slattach is no longer killed when xinetd is stopped. + * Fixed a /tmp security problem which occured when xinetd was sent the + HUP signal (patch from Bugtraq by Marc Heuse slightly + modified by me). + + -- Norbert Veber Sat, 5 Dec 1998 02:27:54 -0500 + +xinetd (2.2.1-7) unstable; urgency=low + + * Fixed a spelling mistake in the change log :) + * Fixed #26546, a problem with postinst and the file-rc package + + -- Norbert Veber Sat, 10 Oct 1998 00:46:13 -0400 + +xinetd (2.2.1-6) unstable; urgency=low + + * Fixed #24246, debian/files and debian/substvars is no longer included + with the deb. + * Fixed #24245. This closes a security hole and policy violation in the + build process, also changed to -O2 while compiling. + * Fixes bug 23866 by diverting on both upgrade and install. + + -- Norbert Veber Sat, 25 Jul 1998 14:18:39 -0400 + +xinetd (2.2.1-5) frozen unstable; urgency=low + + * Changed all scripts that stop xinetd so that they use SIGQUIT to kill the + server. SIGTERM is the default, and this causes xinetd to kill all + child processes, which makes remote installation/maintenance impossible. + * Changed postrm so that it calls update-rc.d with the -f option (in case + /etc/init.d/xinetd is still present. + * changed prerm so that it stops /sbin/portmap instead of + /usr/sbin/rpc.portmap (which doesnt exist) + * Wrote a man page for itox + * Fixed /etc/init.d/xinetd reload/restart + * Added /etc/init.d/xinetd to list of conffiles + + -- Norbert Veber Sat, 13 Jun 1998 20:54:58 -0400 + +xinetd (2.2.1-4) frozen unstable; urgency=medium + + * New developer + * Diverted /etc/init.d/netbase, fixes bug #19125 + * /etc/init.d/xinetd now refers to itself by $0, bug #6860 + * /etc/init.d/xinetd now looks for /sbin/portmap, bug #12021, #12047, + #14159, #17247, #18691, #20701, #22161 + * Diverted /usr/sbin/update-inetd, the new update-inetd now tells the user + to manually edit /etc/xinetd.conf. A new update-inetd that changes + the xinetd.conf will eventually be created. + * Created /usr/doc/xinetd/README-update.inetd which describes the above, + and gives pointers on what to put into xinetd.conf. + * Moved back to main (xinetd is free) + * Included ORIGINAL copyright, as is required by the license. + It is in /usr/doc/xinetd/copyright. + * Created /usr/doc/README.samba which describes a fix/workaround to the + xinetd/nmdb bug (#20705 and #17907). + * No longer provides a default xinetd.conf. It is nearly impossible to + generate one that will work on all systems, and still provides + useful services. The user now has the choice of keeping the current + configuration, or converting inetd.conf. + This fixes half of bug #10059. :) + + -- Norbert Veber Tue, 9 June 1998 22:18:25 -0500 + +xinetd (2.2.1-3.1) non-free; urgency=low + + * Developer back to Boris. + + -- Adam Heath Sun, 15 Mar 1998 15:33:59 -0500 + +xinetd (2.2.1-3) non-free; urgency=low + + * Changed distribution. + * Bug#16310 fixed previously. + + -- Adam Heath Sat, 14 Mar 1998 03:31:50 -0500 + +xinetd (2.2.1-2) unstable; urgency=low + + * Fixes lintian bugs. + + -- Adam Heath Mon, 9 Mar 1998 19:33:00 -0500 + +xinetd (2.2.1-1) unstable; urgency=low + + * New upstream version + + -- Adam Heath Wed, 31 Dec 1997 02:53:10 -0500 + +xinetd (2.1.7-3.1) unstable; urgency=low + + * Compiled for libc6 + + -- Adam Heath Tue, 30 Dec 1997 17:50:01 -0500 + +xinetd (2.1.7-3) unstable; urgency=low + + Changed preinst to ask if xinetd will be + set up to load at boot time. + + -- "Boris D. Beletsky" Tue, 31 Oct 1996 23:13:34 +0200 + +xinetd (2.1.7-2) unstable; urgency=low + + fixed bug #5022 (thks to llucius@millcomm.com) + + -- "Boris D. Beletsky" Tue, 29 Oct 1996 03:23:24 +0200 + +xinetd (2.1.7-1) unstable; urgency=low + + * first release + + -- "Boris D. Beletsky" Sun, 23 Oct 1996 07:45:14 +0200 --- xinetd-2.3.14.orig/debian/xinetd.preinst +++ xinetd-2.3.14/debian/xinetd.preinst @@ -0,0 +1,12 @@ +#!/bin/sh -e + +if test "$1" = "upgrade"; then + # version 1:2.3.14-3 is the first one to provide inet-superserver + if dpkg --compare-versions "$2" lt-nl 1:2.3.14-3; then + rm -f /etc/init.d/inetd + dpkg-divert --package xinetd --remove --rename \ + --divert /etc/init.d/inetd.real /etc/init.d/inetd + fi +fi + +#DEBHELPER# --- xinetd-2.3.14.orig/debian/patches/0003-Various-fixes-from-the-previous-maintainer.patch +++ xinetd-2.3.14/debian/patches/0003-Various-fixes-from-the-previous-maintainer.patch @@ -0,0 +1,77 @@ +From a3410b0bc81ab03a889d9ffc14e351badf8372f1 Mon Sep 17 00:00:00 2001 +From: Pierre Habouzit +Date: Mon, 26 Nov 2007 16:02:04 +0100 +Subject: [PATCH] Various fixes from the previous maintainer. + +--- + xinetd/child.c | 20 +++++++++++++++++--- + xinetd/service.c | 8 ++++---- + 2 files changed, 21 insertions(+), 7 deletions(-) + +diff --git a/xinetd/child.c b/xinetd/child.c +index 89ee54c..48e9615 100644 +--- a/xinetd/child.c ++++ b/xinetd/child.c +@@ -284,6 +284,7 @@ void child_process( struct server *serp ) + connection_s *cp = SERVER_CONNECTION( serp ) ; + struct service_config *scp = SVC_CONF( sp ) ; + const char *func = "child_process" ; ++ int fd, null_fd; + + signal_default_state(); + +@@ -296,9 +297,22 @@ void child_process( struct server *serp ) + signals_pending[0] = -1; + signals_pending[1] = -1; + +- Sclose(0); +- Sclose(1); +- Sclose(2); ++ if ( ( null_fd = open( "/dev/null", O_RDONLY ) ) == -1 ) ++ { ++ msg( LOG_ERR, func, "open('/dev/null') failed: %m") ; ++ _exit( 1 ) ; ++ } ++ ++ for ( fd = 0 ; fd <= MAX_PASS_FD ; fd++ ) ++ { ++ if ( fd != null_fd && dup2( null_fd, fd ) == -1 ) ++ { ++ msg( LOG_ERR, func, "dup2(%d, %d) failed: %m") ; ++ _exit( 1 ) ; ++ } ++ } ++ if ( null_fd > MAX_PASS_FD ) ++ (void) Sclose( null_fd ) ; + + + #ifdef DEBUG_SERVER +diff --git a/xinetd/service.c b/xinetd/service.c +index 3d68d78..0132d6c 100644 +--- a/xinetd/service.c ++++ b/xinetd/service.c +@@ -745,8 +745,8 @@ static status_e failed_service(struct service *sp, + return FAILED; + + if ( last == NULL ) { +- last = SAIN( calloc( 1, sizeof(union xsockaddr) ) ); +- SVC_LAST_DGRAM_ADDR(sp) = (union xsockaddr *)last; ++ SVC_LAST_DGRAM_ADDR(sp) = SAIN( calloc( 1, sizeof(union xsockaddr) ) ); ++ last = SAIN( SVC_LAST_DGRAM_ADDR(sp) ); + } + + (void) time( ¤t_time ) ; +@@ -772,8 +772,8 @@ static status_e failed_service(struct service *sp, + return FAILED; + + if( last == NULL ) { +- last = SAIN6(calloc( 1, sizeof(union xsockaddr) ) ); +- SVC_LAST_DGRAM_ADDR( sp ) = (union xsockaddr *)last; ++ SVC_LAST_DGRAM_ADDR(sp) = SAIN6(calloc( 1, sizeof(union xsockaddr) ) ); ++ last = SAIN6(SVC_LAST_DGRAM_ADDR(sp)); + } + + (void) time( ¤t_time ) ; +-- +1.5.3.6.2040.g15e6 + --- xinetd-2.3.14.orig/debian/patches/0001-Documentation-fixes.patch +++ xinetd-2.3.14/debian/patches/0001-Documentation-fixes.patch @@ -0,0 +1,74 @@ +From d6198f79903fad189118abcd1edc860c4c98a404 Mon Sep 17 00:00:00 2001 +From: Pierre Habouzit +Date: Mon, 26 Nov 2007 16:01:01 +0100 +Subject: [PATCH] Documentation fixes. + +Signed-off-by: Pierre Habouzit +--- + xinetd/itox.8 | 15 +++++++++------ + xinetd/xinetd.conf.man | 2 +- + xinetd/xinetd.man | 2 +- + 3 files changed, 11 insertions(+), 8 deletions(-) + +diff --git a/xinetd/itox.8 b/xinetd/itox.8 +index de109db..89a68fb 100644 +--- a/xinetd/itox.8 ++++ b/xinetd/itox.8 +@@ -1,19 +1,22 @@ +-.TH ITOX 8 "October 1999" "xinetd" ++.TH ITOX 8 "March 2005" "xinetd" + .SH NAME + itox \- converts inetd.conf style configuration files to xinetd.conf + .SH SYNOPSIS +-itox [-daemon_dir ] ++itox [-daemon_dir ] + .SH DESCRIPTION + .B itox + takes on its standard input inetd.conf style entries and dumps to + standard output the corresponding xinetd.conf style entries. + .SH OPTIONS + .TP +-.I -daemon_dir +-Specifies the file name of the TCP daemon used in the inetd.conf file. ++.I -daemon_dir ++If you use tcpd, this option specifies the directory where all the daemons are. ++You must specify this option if you use tcpd and the daemon file names are not ++absolute. + .SH EXAMPLES +-itox -daemon_dir /usr/sbin/tcpd < inetd.conf > xinetd.conf ++itox -daemon_dir /usr/sbin < inetd.conf > xinetd.conf + .SH AUTHOR + xinetd and itox were written by Panagiotis Tsirigotis. + .sp +-This man page was written by Norbert Veber . ++This man page was written by Norbert Veber and Thomas Seyrat ++ +diff --git a/xinetd/xinetd.conf.man b/xinetd/xinetd.conf.man +index a006e48..2fa4656 100644 +--- a/xinetd/xinetd.conf.man ++++ b/xinetd/xinetd.conf.man +@@ -228,7 +228,7 @@ determines the program to execute for this service. + determines the arguments passed to the server. In contrast to \fBinetd\fP, + the server name should \fInot\fP be included in \fIserver_args\fP. + .TP +-+.B libwrap ++.B libwrap + overrides the service name passed to libwrap (which defaults to the + server name, the first server_args component with NAMEINARGS, the id + for internal services and the service name for redirected services). +diff --git a/xinetd/xinetd.man b/xinetd/xinetd.man +index d52c2cc..c76c3c6 100644 +--- a/xinetd/xinetd.man ++++ b/xinetd/xinetd.man +@@ -155,7 +155,7 @@ causes an internal state dump (the default dump file is + \fI/var/run/xinetd.dump\fP; + to change the filename, edit \fIconfig.h\fP and recompile). + .TP +-.B SIGIOT ++.B SIGABRT + causes an internal consistency check to verify that the data structures + used by the program have not been corrupted. + When the check is completed +-- +1.5.3.6.2040.g15e6 + --- xinetd-2.3.14.orig/debian/patches/0004-Fix-xinetd.log.man-installation-path.patch +++ xinetd-2.3.14/debian/patches/0004-Fix-xinetd.log.man-installation-path.patch @@ -0,0 +1,25 @@ +From f98b6a9dd2ad4b8e82d34470139174e1331c90b8 Mon Sep 17 00:00:00 2001 +From: Pierre Habouzit +Date: Mon, 26 Nov 2007 16:02:48 +0100 +Subject: [PATCH] Fix xinetd.log.man installation path. + +--- + Makefile.in | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/Makefile.in b/Makefile.in +index 7511efd..f766383 100644 +--- a/Makefile.in ++++ b/Makefile.in +@@ -80,7 +80,7 @@ install: build + $(INSTALL_CMD) -m 755 xinetd/itox $(DAEMONDIR) + $(INSTALL_CMD) -m 755 $(SRCDIR)/xinetd/xconv.pl $(DAEMONDIR) + $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xinetd.conf.man $(MANDIR)/man5/xinetd.conf.5 +- $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xinetd.log.man $(MANDIR)/man8/xinetd.log.8 ++ $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xinetd.log.man $(MANDIR)/man5/xinetd.log.5 + $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xinetd.man $(MANDIR)/man8/xinetd.8 + $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/itox.8 $(MANDIR)/man8/itox.8 + $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xconv.pl.8 $(MANDIR)/man8/xconv.pl.8 +-- +1.5.3.6.2040.g15e6 + --- xinetd-2.3.14.orig/debian/patches/0005-Update-build-system.patch +++ xinetd-2.3.14/debian/patches/0005-Update-build-system.patch @@ -0,0 +1,13384 @@ +From fac6391dfbfb82dc0ea3c5d3822faff7ad57d307 Mon Sep 17 00:00:00 2001 +From: Pierre Habouzit +Date: Mon, 26 Nov 2007 16:03:37 +0100 +Subject: [PATCH] Update build system. + +Signed-off-by: Pierre Habouzit +--- + configure | 8575 +++++++++++++++++++++++++++++++------------------------------ + 1 files changed, 4306 insertions(+), 4269 deletions(-) + +diff --git a/configure b/configure +index 416848d..188bc18 100755 +--- a/configure ++++ b/configure +@@ -1,25 +1,54 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.59. ++# Generated by GNU Autoconf 2.61. + # +-# Copyright (C) 2003 Free Software Foundation, Inc. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## + ## M4sh Initialization. ## + ## --------------------- ## + +-# Be Bourne compatible ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi +-DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +@@ -29,8 +58,43 @@ else + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -44,18 +108,19 @@ do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -63,157 +128,388 @@ fi + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + ++# CDPATH. ++$as_unset CDPATH + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no + fi + ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in ++ case $as_dir in + /*) +- if ("$as_dir/$as_base" -c ' ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || ++ chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -222,7 +518,28 @@ else + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -231,39 +548,27 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH + ++exec 7<&0 &1 + + # Name of the host. + # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +-exec 6>&1 +- + # + # Initializations. + # + ac_default_prefix=/usr/local ++ac_clean_files= + ac_config_libobj_dir=. ++LIBOBJS= + cross_compiling=no + subdirs= + MFLAGS= + MAKEFLAGS= + SHELL=${CONFIG_SHELL-/bin/sh} + +-# Maximum number of lines to put in a shell here document. +-# This variable seems obsolete. It should probably be removed, and +-# only ac_max_sed_lines should be used. +-: ${ac_max_here_lines=38} +- + # Identity of this package. + PACKAGE_NAME= + PACKAGE_TARNAME= +@@ -275,42 +580,115 @@ ac_unique_file="xinetd/main.c" + # Factoring default headers for most tests. + ac_includes_default="\ + #include +-#if HAVE_SYS_TYPES_H ++#ifdef HAVE_SYS_TYPES_H + # include + #endif +-#if HAVE_SYS_STAT_H ++#ifdef HAVE_SYS_STAT_H + # include + #endif +-#if STDC_HEADERS ++#ifdef STDC_HEADERS + # include + # include + #else +-# if HAVE_STDLIB_H ++# ifdef HAVE_STDLIB_H + # include + # endif + #endif +-#if HAVE_STRING_H +-# if !STDC_HEADERS && HAVE_MEMORY_H ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H + # include + # endif + # include + #endif +-#if HAVE_STRINGS_H ++#ifdef HAVE_STRINGS_H + # include + #endif +-#if HAVE_INTTYPES_H ++#ifdef HAVE_INTTYPES_H + # include +-#else +-# if HAVE_STDINT_H +-# include +-# endif + #endif +-#if HAVE_UNISTD_H ++#ifdef HAVE_STDINT_H ++# include ++#endif ++#ifdef HAVE_UNISTD_H + # include + #endif" + +-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA RANLIB ac_ct_RANLIB CPP EGREP LIBOBJS LTLIBOBJS' ++ac_subst_vars='SHELL ++PATH_SEPARATOR ++PACKAGE_NAME ++PACKAGE_TARNAME ++PACKAGE_VERSION ++PACKAGE_STRING ++PACKAGE_BUGREPORT ++exec_prefix ++prefix ++program_transform_name ++bindir ++sbindir ++libexecdir ++datarootdir ++datadir ++sysconfdir ++sharedstatedir ++localstatedir ++includedir ++oldincludedir ++docdir ++infodir ++htmldir ++dvidir ++pdfdir ++psdir ++libdir ++localedir ++mandir ++DEFS ++ECHO_C ++ECHO_N ++ECHO_T ++LIBS ++build_alias ++host_alias ++target_alias ++build ++build_cpu ++build_vendor ++build_os ++host ++host_cpu ++host_vendor ++host_os ++target ++target_cpu ++target_vendor ++target_os ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++ac_ct_CC ++EXEEXT ++OBJEXT ++INSTALL_PROGRAM ++INSTALL_SCRIPT ++INSTALL_DATA ++RANLIB ++CPP ++GREP ++EGREP ++LIBOBJS ++LTLIBOBJS' + ac_subst_files='' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++CPP' ++ + + # Initialize some variables set by options. + ac_init_help= +@@ -337,34 +715,48 @@ x_libraries=NONE + # and all the variables that are supposed to be based on exec_prefix + # by default will actually change. + # Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' +-datadir='${prefix}/share' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' + sysconfdir='${prefix}/etc' + sharedstatedir='${prefix}/com' + localstatedir='${prefix}/var' +-libdir='${exec_prefix}/lib' + includedir='${prefix}/include' + oldincludedir='/usr/include' +-infodir='${prefix}/info' +-mandir='${prefix}/man' ++docdir='${datarootdir}/doc/${PACKAGE}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' + + ac_prev= ++ac_dashdash= + for ac_option + do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then +- eval "$ac_prev=\$ac_option" ++ eval $ac_prev=\$ac_option + ac_prev= + continue + fi + +- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + +- case $ac_option in ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; +@@ -386,33 +778,45 @@ do + --config-cache | -C) + cache_file=config.cache ;; + +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ +- | --da=*) ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- eval "enable_$ac_feature=no" ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "enable_$ac_feature='$ac_optarg'" ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -439,6 +843,12 @@ do + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; +@@ -463,13 +873,16 @@ do + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ + -localstatedir | --localstatedir | --localstatedi | --localstated \ +- | --localstate | --localstat | --localsta | --localst \ +- | --locals | --local | --loca | --loc | --lo) ++ | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) +@@ -534,6 +947,16 @@ do + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; +@@ -586,24 +1009,20 @@ do + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package| sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "with_$ac_package='$ac_optarg'" ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package | sed 's/-/_/g'` +- eval "with_$ac_package=no" ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. +@@ -634,8 +1053,7 @@ Try \`$0 --help' for more information." >&2 + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } +- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` +- eval "$ac_envvar='$ac_optarg'" ++ eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) +@@ -655,27 +1073,19 @@ if test -n "$ac_prev"; then + { (exit 1); exit 1; }; } + fi + +-# Be sure to have absolute paths. +-for ac_var in exec_prefix prefix ++# Be sure to have absolute directory names. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir + do +- eval ac_val=$`echo $ac_var` ++ eval ac_val=\$$ac_var + case $ac_val in +- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; +- esac +-done +- +-# Be sure to have absolute paths. +-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ +- localstatedir libdir includedir oldincludedir infodir mandir +-do +- eval ac_val=$`echo $ac_var` +- case $ac_val in +- [\\/$]* | ?:[\\/]* ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } + done + + # There might be people who depend on the old broken behavior: `$host' +@@ -702,74 +1112,76 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias- + test "$silent" = yes && exec 6>/dev/null + + ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { echo "$as_me: error: Working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes +- # Try the directory containing this script, then its parent. +- ac_confdir=`(dirname "$0") 2>/dev/null || ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$0" || + $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X"$0" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + srcdir=$ac_confdir +- if test ! -r $srcdir/$ac_unique_file; then ++ if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi + else + ac_srcdir_defaulted=no + fi +-if test ! -r $srcdir/$ac_unique_file; then +- if test "$ac_srcdir_defaulted" = yes; then +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 +- { (exit 1); exit 1; }; } +- else +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +- fi + fi +-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || +- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } +-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +-ac_env_build_alias_set=${build_alias+set} +-ac_env_build_alias_value=$build_alias +-ac_cv_env_build_alias_set=${build_alias+set} +-ac_cv_env_build_alias_value=$build_alias +-ac_env_host_alias_set=${host_alias+set} +-ac_env_host_alias_value=$host_alias +-ac_cv_env_host_alias_set=${host_alias+set} +-ac_cv_env_host_alias_value=$host_alias +-ac_env_target_alias_set=${target_alias+set} +-ac_env_target_alias_value=$target_alias +-ac_cv_env_target_alias_set=${target_alias+set} +-ac_cv_env_target_alias_value=$target_alias +-ac_env_CC_set=${CC+set} +-ac_env_CC_value=$CC +-ac_cv_env_CC_set=${CC+set} +-ac_cv_env_CC_value=$CC +-ac_env_CFLAGS_set=${CFLAGS+set} +-ac_env_CFLAGS_value=$CFLAGS +-ac_cv_env_CFLAGS_set=${CFLAGS+set} +-ac_cv_env_CFLAGS_value=$CFLAGS +-ac_env_LDFLAGS_set=${LDFLAGS+set} +-ac_env_LDFLAGS_value=$LDFLAGS +-ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +-ac_cv_env_LDFLAGS_value=$LDFLAGS +-ac_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_env_CPPFLAGS_value=$CPPFLAGS +-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_cv_env_CPPFLAGS_value=$CPPFLAGS +-ac_env_CPP_set=${CPP+set} +-ac_env_CPP_value=$CPP +-ac_cv_env_CPP_set=${CPP+set} +-ac_cv_env_CPP_value=$CPP ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done + + # + # Report the --help message. +@@ -798,9 +1210,6 @@ Configuration: + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +-_ACEOF +- +- cat <<_ACEOF + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] +@@ -818,15 +1227,22 @@ Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] +- --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --infodir=DIR info documentation [PREFIX/info] +- --mandir=DIR man documentation [PREFIX/man] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] + _ACEOF + + cat <<\_ACEOF +@@ -858,126 +1274,95 @@ Some influential environment variables: + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory +- CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have +- headers in a nonstandard directory ++ LIBS libraries to pass to the linker, e.g. -l ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory + CPP C preprocessor + + Use these variables to override the choices made by `configure' or to help + it to find libraries and programs with nonstandard names/locations. + + _ACEOF ++ac_status=$? + fi + + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. +- ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d $ac_dir || continue ++ test -d "$ac_dir" || continue + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac +- +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac +- +- cd $ac_dir +- # Check for guested configure; otherwise get Cygnus style configure. +- if test -f $ac_srcdir/configure.gnu; then +- echo +- $SHELL $ac_srcdir/configure.gnu --help=recursive +- elif test -f $ac_srcdir/configure; then +- echo +- $SHELL $ac_srcdir/configure --help=recursive +- elif test -f $ac_srcdir/configure.ac || +- test -f $ac_srcdir/configure.in; then +- echo +- $ac_configure --help ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 +- fi +- cd $ac_popdir ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } + done + fi + +-test -n "$ac_init_help" && exit 0 ++test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF ++configure ++generated by GNU Autoconf 2.61 + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF +- exit 0 ++ exit + fi +-exec 5>config.log +-cat >&5 <<_ACEOF ++cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by $as_me, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + $ $0 $@ + + _ACEOF ++exec 5>>config.log + { + cat <<_ASUNAME + ## --------- ## +@@ -996,7 +1381,7 @@ uname -v = `(uname -v) 2>/dev/null || echo unknown` + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +-hostinfo = `(hostinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +@@ -1010,6 +1395,7 @@ do + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" + done ++IFS=$as_save_IFS + + } >&5 + +@@ -1031,7 +1417,6 @@ _ACEOF + ac_configure_args= + ac_configure_args0= + ac_configure_args1= +-ac_sep= + ac_must_keep_next=false + for ac_pass in 1 2 + do +@@ -1042,7 +1427,7 @@ do + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ++ *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in +@@ -1064,9 +1449,7 @@ do + -* ) ac_must_keep_next=true ;; + esac + fi +- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" +- # Get rid of the leading space. +- ac_sep=" " ++ ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +@@ -1077,8 +1460,8 @@ $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_ + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there + # would cause problems or look ugly. +-# WARNING: Be sure not to use single quotes in there, as some shells, +-# such as our DU 5.0 friend, will then `close' the trap. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. + trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { +@@ -1091,20 +1474,34 @@ trap 'exit_status=$? + _ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done + (set) 2>&1 | +- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + sed -n \ +- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" +- ;; ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( + *) +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} ++ esac | ++ sort ++) + echo + + cat <<\_ASBOX +@@ -1115,22 +1512,28 @@ _ASBOX + echo + for ac_var in $ac_subst_vars + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +-## ------------- ## +-## Output files. ## +-## ------------- ## ++## ------------------- ## ++## File substitutions. ## ++## ------------------- ## + _ASBOX + echo + for ac_var in $ac_subst_files + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi +@@ -1142,26 +1545,24 @@ _ASBOX + ## ----------- ## + _ASBOX + echo +- sed "/^$/d" confdefs.h | sort ++ cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 +- rm -f core *.core && +- rm -rf conftest* confdefs* conf$$* $ac_clean_files && ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +- ' 0 ++' 0 + for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. +-rm -rf conftest* confdefs.h +-# AIX cpp loses on an empty file, so make sure it contains at least a newline. +-echo >confdefs.h ++rm -f -r conftest* confdefs.h + + # Predefined preprocessor variables. + +@@ -1192,14 +1593,17 @@ _ACEOF + + # Let the site file select an alternate cache file if it wants to. + # Prefer explicitly selected file to automatically selected ones. +-if test -z "$CONFIG_SITE"; then +- if test "x$prefix" != xNONE; then +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" +- else +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +- fi ++if test -n "$CONFIG_SITE"; then ++ set x "$CONFIG_SITE" ++elif test "x$prefix" != xNONE; then ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" ++else ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" + fi +-for ac_site_file in $CONFIG_SITE; do ++shift ++for ac_site_file ++do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 + echo "$as_me: loading site script $ac_site_file" >&6;} +@@ -1215,8 +1619,8 @@ if test -r "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 + echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in +- [\\/]* | ?:[\\/]* ) . $cache_file;; +- *) . ./$cache_file;; ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; + esac + fi + else +@@ -1228,12 +1632,11 @@ fi + # Check that the precious variables saved in the cache have kept the same + # value. + ac_cache_corrupted=false +-for ac_var in `(set) 2>&1 | +- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do ++for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set +- eval ac_old_val="\$ac_cv_env_${ac_var}_value" +- eval ac_new_val="\$ac_env_${ac_var}_value" ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +@@ -1258,8 +1661,7 @@ echo "$as_me: current value: $ac_new_val" >&2;} + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) +- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in +@@ -1276,12 +1678,6 @@ echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start ov + { (exit 1); exit 1; }; } + fi + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- + + + +@@ -1298,108 +1694,163 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + ac_aux_dir= +-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +- if test -f $ac_dir/install-sh; then ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break +- elif test -f $ac_dir/install.sh; then ++ elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break +- elif test -f $ac_dir/shtool; then ++ elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi + done + if test -z "$ac_aux_dir"; then +- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } + fi +-ac_config_guess="$SHELL $ac_aux_dir/config.guess" +-ac_config_sub="$SHELL $ac_aux_dir/config.sub" +-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ + + # Make sure we can run config.sub. +-$ac_config_sub sun4 >/dev/null 2>&1 || +- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +-echo "$as_me: error: cannot run $ac_config_sub" >&2;} ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +-echo "$as_me:$LINENO: checking build system type" >&5 +-echo $ECHO_N "checking build system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } + if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_build_alias=$build_alias +-test -z "$ac_cv_build_alias" && +- ac_cv_build_alias=`$ac_config_guess` +-test -z "$ac_cv_build_alias" && ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 + echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + + fi +-echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +-echo "${ECHO_T}$ac_cv_build" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + build=$ac_cv_build +-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +- +- +-echo "$as_me:$LINENO: checking host system type" >&5 +-echo $ECHO_N "checking host system type... $ECHO_C" >&6 ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } + if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_host_alias=$host_alias +-test -z "$ac_cv_host_alias" && +- ac_cv_host_alias=$ac_cv_build_alias +-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +-echo "${ECHO_T}$ac_cv_host" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + host=$ac_cv_host +-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +- +- +-echo "$as_me:$LINENO: checking target system type" >&5 +-echo $ECHO_N "checking target system type... $ECHO_C" >&6 ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ echo "$as_me:$LINENO: checking target system type" >&5 ++echo $ECHO_N "checking target system type... $ECHO_C" >&6; } + if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_target_alias=$target_alias +-test "x$ac_cv_target_alias" = "x" && +- ac_cv_target_alias=$ac_cv_host_alias +-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} ++ if test "x$target_alias" = x; then ++ ac_cv_target=$ac_cv_host ++else ++ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +-echo "${ECHO_T}$ac_cv_target" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 ++echo "${ECHO_T}$ac_cv_target" >&6; } ++case $ac_cv_target in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 ++echo "$as_me: error: invalid value of canonical target" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + target=$ac_cv_target +-target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_target ++shift ++target_cpu=$1 ++target_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++target_os=$* ++IFS=$ac_save_IFS ++case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + + # The aliases save the names the user supplied, while $host etc. +@@ -1417,8 +1868,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1431,32 +1882,34 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1469,36 +1922,51 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + else + CC="$ac_cv_prog_CC" + fi + + if test -z "$CC"; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1511,74 +1979,34 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- +-fi +-if test -z "$ac_cv_prog_CC"; then +- ac_ct_CC=$CC +- # Extract the first word of "cc", so it can be a program name with args. +-set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_CC"; then +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +- +-fi +-fi +-ac_ct_CC=$ac_cv_prog_ac_ct_CC +-if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC +-else +- CC="$ac_cv_prog_CC" +-fi + ++ fi + fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1592,7 +2020,7 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue +@@ -1603,6 +2031,7 @@ do + fi + done + done ++IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. +@@ -1620,22 +2049,23 @@ fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1648,36 +2078,38 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$CC" && break + done + fi + if test -z "$CC"; then + ac_ct_CC=$CC +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1690,29 +2122,45 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_CC" && break + done + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + fi + + fi +@@ -1725,21 +2173,35 @@ See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C compiler version" >&5 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +@@ -1764,47 +2226,77 @@ ac_clean_files="$ac_clean_files a.out a.exe b.out" + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } + ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 +- (eval $ac_link_default) 2>&5 ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { (ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link_default") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- # Find the output, starting from the most likely. This scheme is +-# not robust to junk in `.', hence go to wildcards (a.*) only as a last +-# resort. +- +-# Be careful to initialize this variable, since it used to be cached. +-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +-ac_cv_exeext= +-# b.out is created by i960 compilers. +-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) +- ;; +- conftest.$ac_ext ) +- # This is the source file. ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) +- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- # FIXME: I believe we export ac_cv_exeext for Libtool, +- # but it would be cool to find out if it's true. Does anybody +- # maintain Libtool? --akim. +- export ac_cv_exeext ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. + break;; + * ) + break;; + esac + done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ + else ++ ac_file='' ++fi ++ ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } ++if test -z "$ac_file"; then + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +@@ -1816,19 +2308,21 @@ See \`config.log' for more details." >&2;} + fi + + ac_exeext=$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_file" >&5 +-echo "${ECHO_T}$ac_file" >&6 + +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -1847,22 +2341,27 @@ See \`config.log' for more details." >&2;} + fi + fi + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + + rm -f a.out a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-echo "${ECHO_T}$cross_compiling" >&6 +- +-echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +@@ -1873,9 +2372,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- export ac_cv_exeext + break;; + * ) break;; + esac +@@ -1889,14 +2387,14 @@ See \`config.log' for more details." >&2;} + fi + + rm -f conftest$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-echo "${ECHO_T}$ac_cv_exeext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } + if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1916,14 +2414,20 @@ main () + } + _ACEOF + rm -f conftest.o conftest.obj +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +@@ -1941,12 +2445,12 @@ fi + + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-echo "${ECHO_T}$ac_cv_objext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1969,50 +2473,49 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } + GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-CFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -2028,38 +2531,118 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cc_g=no ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -2075,12 +2658,12 @@ else + CFLAGS= + fi + fi +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_prog_cc_stdc=no ++ ac_cv_prog_cc_c89=no + ac_save_CC=$CC + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -2114,12 +2697,17 @@ static char *f (char * (*g) (char **, int), char **p, ...) + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated +- as 'x'. The following induces an error, until -std1 is added to get ++ as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something +- that's true only with -std1. */ ++ that's true only with -std. */ + int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ + int test (int i, double x); + struct s1 {int (*f) (int a);}; + struct s2 {int (*f) (double a);}; +@@ -2134,205 +2722,57 @@ return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + return 0; + } + _ACEOF +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX 10.20 and later -Ae +-# HP-UX older versions -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_prog_cc_stdc=$ac_arg +-break ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_c89=$ac_arg + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break + done +-rm -f conftest.$ac_ext conftest.$ac_objext ++rm -f conftest.$ac_ext + CC=$ac_save_CC + + fi +- +-case "x$ac_cv_prog_cc_stdc" in +- x|xno) +- echo "$as_me:$LINENO: result: none needed" >&5 +-echo "${ECHO_T}none needed" >&6 ;; ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; ++ xno) ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; + *) +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 +- CC="$CC $ac_cv_prog_cc_stdc" ;; ++ CC="$CC $ac_cv_prog_cc_c89" ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + esac + +-# Some people use a C++ compiler to compile C. Since we use `exit', +-# in C++ we need to declare it. In case someone uses the same compiler +-# for both compiling C and C++ we need to have the C++ compiler decide +-# the declaration of exit, since it's the most demanding environment. +-cat >conftest.$ac_ext <<_ACEOF +-#ifndef __cplusplus +- choke me +-#endif +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-#include +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-continue +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h +-fi +- +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -2352,8 +2792,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -2375,7 +2815,7 @@ case $as_dir/ in + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -2394,21 +2834,22 @@ case $as_dir/ in + ;; + esac + done ++IFS=$as_save_IFS + + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -2421,8 +2862,8 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. + set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2435,32 +2876,34 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + RANLIB=$ac_cv_prog_RANLIB + if test -n "$RANLIB"; then +- echo "$as_me:$LINENO: result: $RANLIB" >&5 +-echo "${ECHO_T}$RANLIB" >&6 ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. + set dummy ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2473,27 +2916,41 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" + fi + fi + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB + if test -n "$ac_ct_RANLIB"; then +- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- RANLIB=$ac_ct_RANLIB ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ RANLIB=$ac_ct_RANLIB ++ fi + else + RANLIB="$ac_cv_prog_RANLIB" + fi +@@ -2501,8 +2958,8 @@ fi + + + +-echo "$as_me:$LINENO: checking for main in -lcompat" >&5 +-echo $ECHO_N "checking for main in -lcompat... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for main in -lcompat" >&5 ++echo $ECHO_N "checking for main in -lcompat... $ECHO_C" >&6; } + if test "${ac_cv_lib_compat_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2519,46 +2976,43 @@ cat >>conftest.$ac_ext <<_ACEOF + int + main () + { +-main (); ++return main (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_compat_main=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_compat_main=no ++ ac_cv_lib_compat_main=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_compat_main" >&5 +-echo "${ECHO_T}$ac_cv_lib_compat_main" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_compat_main" >&5 ++echo "${ECHO_T}$ac_cv_lib_compat_main" >&6; } + if test $ac_cv_lib_compat_main = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBCOMPAT 1 +@@ -2568,13 +3022,12 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for library containing gethostbyname" >&5 +-echo $ECHO_N "checking for library containing gethostbyname... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for library containing gethostbyname" >&5 ++echo $ECHO_N "checking for library containing gethostbyname... $ECHO_C" >&6; } + if test "${ac_cv_search_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_func_search_save_LIBS=$LIBS +-ac_cv_search_gethostbyname=no + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -2582,125 +3035,82 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char gethostbyname (); + int + main () + { +-gethostbyname (); ++return gethostbyname (); + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++for ac_lib in '' nsl socket resolv; do ++ if test -z "$ac_lib"; then ++ ac_res="none required" ++ else ++ ac_res=-l$ac_lib ++ LIBS="-l$ac_lib $ac_func_search_save_LIBS" ++ fi ++ rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_gethostbyname="none required" ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_search_gethostbyname=$ac_res + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test "$ac_cv_search_gethostbyname" = no; then +- for ac_lib in nsl socket resolv; do +- LIBS="-l$ac_lib $ac_func_search_save_LIBS" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char gethostbyname (); +-int +-main () +-{ +-gethostbyname (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_gethostbyname="-l$ac_lib" +-break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext ++ if test "${ac_cv_search_gethostbyname+set}" = set; then ++ break + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +- done ++done ++if test "${ac_cv_search_gethostbyname+set}" = set; then ++ : ++else ++ ac_cv_search_gethostbyname=no + fi ++rm conftest.$ac_ext + LIBS=$ac_func_search_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_search_gethostbyname" >&5 +-echo "${ECHO_T}$ac_cv_search_gethostbyname" >&6 +-if test "$ac_cv_search_gethostbyname" != no; then +- test "$ac_cv_search_gethostbyname" = "none required" || LIBS="$ac_cv_search_gethostbyname $LIBS" ++{ echo "$as_me:$LINENO: result: $ac_cv_search_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_search_gethostbyname" >&6; } ++ac_res=$ac_cv_search_gethostbyname ++if test "$ac_res" != no; then ++ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + + fi + +-echo "$as_me:$LINENO: checking for library containing getnameinfo" >&5 +-echo $ECHO_N "checking for library containing getnameinfo... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for library containing getnameinfo" >&5 ++echo $ECHO_N "checking for library containing getnameinfo... $ECHO_C" >&6; } + if test "${ac_cv_search_getnameinfo+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_func_search_save_LIBS=$LIBS +-ac_cv_search_getnameinfo=no + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -2708,125 +3118,82 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char getnameinfo (); + int + main () + { +-getnameinfo (); ++return getnameinfo (); + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++for ac_lib in '' nsl socket resolv; do ++ if test -z "$ac_lib"; then ++ ac_res="none required" ++ else ++ ac_res=-l$ac_lib ++ LIBS="-l$ac_lib $ac_func_search_save_LIBS" ++ fi ++ rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_getnameinfo="none required" ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_search_getnameinfo=$ac_res + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test "$ac_cv_search_getnameinfo" = no; then +- for ac_lib in nsl socket resolv; do +- LIBS="-l$ac_lib $ac_func_search_save_LIBS" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char getnameinfo (); +-int +-main () +-{ +-getnameinfo (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_getnameinfo="-l$ac_lib" +-break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext ++ if test "${ac_cv_search_getnameinfo+set}" = set; then ++ break + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +- done ++done ++if test "${ac_cv_search_getnameinfo+set}" = set; then ++ : ++else ++ ac_cv_search_getnameinfo=no + fi ++rm conftest.$ac_ext + LIBS=$ac_func_search_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_search_getnameinfo" >&5 +-echo "${ECHO_T}$ac_cv_search_getnameinfo" >&6 +-if test "$ac_cv_search_getnameinfo" != no; then +- test "$ac_cv_search_getnameinfo" = "none required" || LIBS="$ac_cv_search_getnameinfo $LIBS" ++{ echo "$as_me:$LINENO: result: $ac_cv_search_getnameinfo" >&5 ++echo "${ECHO_T}$ac_cv_search_getnameinfo" >&6; } ++ac_res=$ac_cv_search_getnameinfo ++if test "$ac_res" != no; then ++ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + + fi + +-echo "$as_me:$LINENO: checking for library containing inet_ntop" >&5 +-echo $ECHO_N "checking for library containing inet_ntop... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for library containing inet_ntop" >&5 ++echo $ECHO_N "checking for library containing inet_ntop... $ECHO_C" >&6; } + if test "${ac_cv_search_inet_ntop+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_func_search_save_LIBS=$LIBS +-ac_cv_search_inet_ntop=no + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -2834,115 +3201,73 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char inet_ntop (); + int + main () + { +-inet_ntop (); ++return inet_ntop (); + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++for ac_lib in '' nsl socket resolv; do ++ if test -z "$ac_lib"; then ++ ac_res="none required" ++ else ++ ac_res=-l$ac_lib ++ LIBS="-l$ac_lib $ac_func_search_save_LIBS" ++ fi ++ rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_inet_ntop="none required" ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_search_inet_ntop=$ac_res + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test "$ac_cv_search_inet_ntop" = no; then +- for ac_lib in nsl socket resolv; do +- LIBS="-l$ac_lib $ac_func_search_save_LIBS" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char inet_ntop (); +-int +-main () +-{ +-inet_ntop (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_inet_ntop="-l$ac_lib" +-break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext ++ if test "${ac_cv_search_inet_ntop+set}" = set; then ++ break + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +- done ++done ++if test "${ac_cv_search_inet_ntop+set}" = set; then ++ : ++else ++ ac_cv_search_inet_ntop=no + fi ++rm conftest.$ac_ext + LIBS=$ac_func_search_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_search_inet_ntop" >&5 +-echo "${ECHO_T}$ac_cv_search_inet_ntop" >&6 +-if test "$ac_cv_search_inet_ntop" != no; then +- test "$ac_cv_search_inet_ntop" = "none required" || LIBS="$ac_cv_search_inet_ntop $LIBS" ++{ echo "$as_me:$LINENO: result: $ac_cv_search_inet_ntop" >&5 ++echo "${ECHO_T}$ac_cv_search_inet_ntop" >&6; } ++ac_res=$ac_cv_search_inet_ntop ++if test "$ac_res" != no; then ++ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + + fi + +@@ -2951,9 +3276,9 @@ fi + for ac_func in getnameinfo inet_ntop + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -2979,68 +3304,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -3053,9 +3370,9 @@ done + for ac_func in difftime + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -3081,68 +3398,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -3150,8 +3459,8 @@ _ACEOF + + else + +-echo "$as_me:$LINENO: checking for difftime in -lm" >&5 +-echo $ECHO_N "checking for difftime in -lm... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for difftime in -lm" >&5 ++echo $ECHO_N "checking for difftime in -lm... $ECHO_C" >&6; } + if test "${ac_cv_lib_m_difftime+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3164,56 +3473,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char difftime (); + int + main () + { +-difftime (); ++return difftime (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_m_difftime=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_m_difftime=no ++ ac_cv_lib_m_difftime=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_m_difftime" >&5 +-echo "${ECHO_T}$ac_cv_lib_m_difftime" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_m_difftime" >&5 ++echo "${ECHO_T}$ac_cv_lib_m_difftime" >&6; } + if test $ac_cv_lib_m_difftime = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBM 1 +@@ -3230,9 +3536,9 @@ done + for ac_func in fcvt + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -3258,68 +3564,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -3327,8 +3625,8 @@ _ACEOF + + else + +-echo "$as_me:$LINENO: checking for fcvt in -lm" >&5 +-echo $ECHO_N "checking for fcvt in -lm... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for fcvt in -lm" >&5 ++echo $ECHO_N "checking for fcvt in -lm... $ECHO_C" >&6; } + if test "${ac_cv_lib_m_fcvt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3341,56 +3639,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char fcvt (); + int + main () + { +-fcvt (); ++return fcvt (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_m_fcvt=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_m_fcvt=no ++ ac_cv_lib_m_fcvt=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_m_fcvt" >&5 +-echo "${ECHO_T}$ac_cv_lib_m_fcvt" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_m_fcvt" >&5 ++echo "${ECHO_T}$ac_cv_lib_m_fcvt" >&6; } + if test $ac_cv_lib_m_fcvt = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBM 1 +@@ -3407,9 +3702,9 @@ done + for ac_func in ecvt + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -3435,68 +3730,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -3504,8 +3791,8 @@ _ACEOF + + else + +-echo "$as_me:$LINENO: checking for ecvt in -lm" >&5 +-echo $ECHO_N "checking for ecvt in -lm... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for ecvt in -lm" >&5 ++echo $ECHO_N "checking for ecvt in -lm... $ECHO_C" >&6; } + if test "${ac_cv_lib_m_ecvt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3518,56 +3805,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char ecvt (); + int + main () + { +-ecvt (); ++return ecvt (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_m_ecvt=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_m_ecvt=no ++ ac_cv_lib_m_ecvt=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_m_ecvt" >&5 +-echo "${ECHO_T}$ac_cv_lib_m_ecvt" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_m_ecvt" >&5 ++echo "${ECHO_T}$ac_cv_lib_m_ecvt" >&6; } + if test $ac_cv_lib_m_ecvt = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBM 1 +@@ -3584,9 +3868,9 @@ done + for ac_func in gcvt + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -3612,68 +3896,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -3681,8 +3957,8 @@ _ACEOF + + else + +-echo "$as_me:$LINENO: checking for gcvt in -lm" >&5 +-echo $ECHO_N "checking for gcvt in -lm... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for gcvt in -lm" >&5 ++echo $ECHO_N "checking for gcvt in -lm... $ECHO_C" >&6; } + if test "${ac_cv_lib_m_gcvt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3695,56 +3971,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char gcvt (); + int + main () + { +-gcvt (); ++return gcvt (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_m_gcvt=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_m_gcvt=no ++ ac_cv_lib_m_gcvt=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_m_gcvt" >&5 +-echo "${ECHO_T}$ac_cv_lib_m_gcvt" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_m_gcvt" >&5 ++echo "${ECHO_T}$ac_cv_lib_m_gcvt" >&6; } + if test $ac_cv_lib_m_gcvt = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBM 1 +@@ -3758,8 +4031,8 @@ fi + done + + +-echo "$as_me:$LINENO: checking for strerror" >&5 +-echo $ECHO_N "checking for strerror... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for strerror" >&5 ++echo $ECHO_N "checking for strerror... $ECHO_C" >&6; } + if test "${ac_cv_func_strerror+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3786,68 +4059,59 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef strerror + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char strerror (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_strerror) || defined (__stub___strerror) ++#if defined __stub_strerror || defined __stub___strerror + choke me +-#else +-char (*f) () = strerror; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != strerror; ++return strerror (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_strerror=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_strerror=no ++ ac_cv_func_strerror=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_strerror" >&5 +-echo "${ECHO_T}$ac_cv_func_strerror" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_strerror" >&5 ++echo "${ECHO_T}$ac_cv_func_strerror" >&6; } + if test $ac_cv_func_strerror = yes; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_STRERROR 1 +@@ -3855,8 +4119,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for strcasecmp" >&5 +-echo $ECHO_N "checking for strcasecmp... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for strcasecmp" >&5 ++echo $ECHO_N "checking for strcasecmp... $ECHO_C" >&6; } + if test "${ac_cv_func_strcasecmp+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3883,68 +4147,59 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef strcasecmp + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char strcasecmp (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_strcasecmp) || defined (__stub___strcasecmp) ++#if defined __stub_strcasecmp || defined __stub___strcasecmp + choke me +-#else +-char (*f) () = strcasecmp; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != strcasecmp; ++return strcasecmp (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_strcasecmp=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_strcasecmp=no ++ ac_cv_func_strcasecmp=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_strcasecmp" >&5 +-echo "${ECHO_T}$ac_cv_func_strcasecmp" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_strcasecmp" >&5 ++echo "${ECHO_T}$ac_cv_func_strcasecmp" >&6; } + if test $ac_cv_func_strcasecmp = yes; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_STRCASECMP 1 +@@ -3952,8 +4207,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for socket" >&5 +-echo $ECHO_N "checking for socket... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for socket" >&5 ++echo $ECHO_N "checking for socket... $ECHO_C" >&6; } + if test "${ac_cv_func_socket+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3980,74 +4235,65 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef socket + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char socket (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_socket) || defined (__stub___socket) ++#if defined __stub_socket || defined __stub___socket + choke me +-#else +-char (*f) () = socket; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != socket; ++return socket (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_socket=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_socket=no ++ ac_cv_func_socket=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_socket" >&5 +-echo "${ECHO_T}$ac_cv_func_socket" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_socket" >&5 ++echo "${ECHO_T}$ac_cv_func_socket" >&6; } + if test $ac_cv_func_socket = yes; then + : + else + +-echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 +-echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 ++echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6; } + if test "${ac_cv_lib_socket_socket+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4060,56 +4306,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char socket (); + int + main () + { +-socket (); ++return socket (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_socket_socket=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_socket_socket=no ++ ac_cv_lib_socket_socket=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5 +-echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6; } + if test $ac_cv_lib_socket_socket = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBSOCKET 1 +@@ -4119,8 +4362,8 @@ _ACEOF + + else + +-echo "$as_me:$LINENO: checking for socket in -lnsl" >&5 +-echo $ECHO_N "checking for socket in -lnsl... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for socket in -lnsl" >&5 ++echo $ECHO_N "checking for socket in -lnsl... $ECHO_C" >&6; } + if test "${ac_cv_lib_nsl_socket+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4133,56 +4376,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char socket (); + int + main () + { +-socket (); ++return socket (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_nsl_socket=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_nsl_socket=no ++ ac_cv_lib_nsl_socket=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_socket" >&5 +-echo "${ECHO_T}$ac_cv_lib_nsl_socket" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_socket" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_socket" >&6; } + if test $ac_cv_lib_nsl_socket = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBNSL 1 +@@ -4196,8 +4436,8 @@ fi + + fi + +-echo "$as_me:$LINENO: checking for inet_aton" >&5 +-echo $ECHO_N "checking for inet_aton... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for inet_aton" >&5 ++echo $ECHO_N "checking for inet_aton... $ECHO_C" >&6; } + if test "${ac_cv_func_inet_aton+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4224,74 +4464,65 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef inet_aton + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char inet_aton (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_inet_aton) || defined (__stub___inet_aton) ++#if defined __stub_inet_aton || defined __stub___inet_aton + choke me +-#else +-char (*f) () = inet_aton; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != inet_aton; ++return inet_aton (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_inet_aton=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_inet_aton=no ++ ac_cv_func_inet_aton=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_inet_aton" >&5 +-echo "${ECHO_T}$ac_cv_func_inet_aton" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_inet_aton" >&5 ++echo "${ECHO_T}$ac_cv_func_inet_aton" >&6; } + if test $ac_cv_func_inet_aton = yes; then + : + else + +-echo "$as_me:$LINENO: checking for inet_aton in -lnsl" >&5 +-echo $ECHO_N "checking for inet_aton in -lnsl... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for inet_aton in -lnsl" >&5 ++echo $ECHO_N "checking for inet_aton in -lnsl... $ECHO_C" >&6; } + if test "${ac_cv_lib_nsl_inet_aton+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4304,56 +4535,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char inet_aton (); + int + main () + { +-inet_aton (); ++return inet_aton (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_nsl_inet_aton=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_nsl_inet_aton=no ++ ac_cv_lib_nsl_inet_aton=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_inet_aton" >&5 +-echo "${ECHO_T}$ac_cv_lib_nsl_inet_aton" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_inet_aton" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_inet_aton" >&6; } + if test $ac_cv_lib_nsl_inet_aton = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBNSL 1 +@@ -4363,8 +4591,8 @@ _ACEOF + + else + +-echo "$as_me:$LINENO: checking for inet_aton in -lsocket" >&5 +-echo $ECHO_N "checking for inet_aton in -lsocket... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for inet_aton in -lsocket" >&5 ++echo $ECHO_N "checking for inet_aton in -lsocket... $ECHO_C" >&6; } + if test "${ac_cv_lib_socket_inet_aton+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4377,56 +4605,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char inet_aton (); + int + main () + { +-inet_aton (); ++return inet_aton (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_socket_inet_aton=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_socket_inet_aton=no ++ ac_cv_lib_socket_inet_aton=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_socket_inet_aton" >&5 +-echo "${ECHO_T}$ac_cv_lib_socket_inet_aton" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_inet_aton" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_inet_aton" >&6; } + if test $ac_cv_lib_socket_inet_aton = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBSOCKET 1 +@@ -4436,8 +4661,8 @@ _ACEOF + + else + +-echo "$as_me:$LINENO: checking for inet_aton in -lresolv" >&5 +-echo $ECHO_N "checking for inet_aton in -lresolv... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for inet_aton in -lresolv" >&5 ++echo $ECHO_N "checking for inet_aton in -lresolv... $ECHO_C" >&6; } + if test "${ac_cv_lib_resolv_inet_aton+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4450,56 +4675,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char inet_aton (); + int + main () + { +-inet_aton (); ++return inet_aton (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_resolv_inet_aton=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_resolv_inet_aton=no ++ ac_cv_lib_resolv_inet_aton=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_inet_aton" >&5 +-echo "${ECHO_T}$ac_cv_lib_resolv_inet_aton" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_inet_aton" >&5 ++echo "${ECHO_T}$ac_cv_lib_resolv_inet_aton" >&6; } + if test $ac_cv_lib_resolv_inet_aton = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBRESOLV 1 +@@ -4520,8 +4742,8 @@ fi + + fi + +-echo "$as_me:$LINENO: checking for setenv" >&5 +-echo $ECHO_N "checking for setenv... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for setenv" >&5 ++echo $ECHO_N "checking for setenv... $ECHO_C" >&6; } + if test "${ac_cv_func_setenv+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4548,68 +4770,59 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef setenv + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char setenv (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_setenv) || defined (__stub___setenv) ++#if defined __stub_setenv || defined __stub___setenv + choke me +-#else +-char (*f) () = setenv; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != setenv; ++return setenv (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_setenv=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_setenv=no ++ ac_cv_func_setenv=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_setenv" >&5 +-echo "${ECHO_T}$ac_cv_func_setenv" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_setenv" >&5 ++echo "${ECHO_T}$ac_cv_func_setenv" >&6; } + if test $ac_cv_func_setenv = yes; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_SETENV 1 +@@ -4617,8 +4830,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for strsignal" >&5 +-echo $ECHO_N "checking for strsignal... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for strsignal" >&5 ++echo $ECHO_N "checking for strsignal... $ECHO_C" >&6; } + if test "${ac_cv_func_strsignal+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4645,68 +4858,59 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef strsignal + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char strsignal (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_strsignal) || defined (__stub___strsignal) ++#if defined __stub_strsignal || defined __stub___strsignal + choke me +-#else +-char (*f) () = strsignal; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != strsignal; ++return strsignal (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_strsignal=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_strsignal=no ++ ac_cv_func_strsignal=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_strsignal" >&5 +-echo "${ECHO_T}$ac_cv_func_strsignal" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_strsignal" >&5 ++echo "${ECHO_T}$ac_cv_func_strsignal" >&6; } + if test $ac_cv_func_strsignal = yes; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_STRSIGNAL 1 +@@ -4714,8 +4918,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for sys_siglist in -lc" >&5 +-echo $ECHO_N "checking for sys_siglist in -lc... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for sys_siglist in -lc" >&5 ++echo $ECHO_N "checking for sys_siglist in -lc... $ECHO_C" >&6; } + if test "${ac_cv_lib_c_sys_siglist+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4728,56 +4932,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char sys_siglist (); + int + main () + { +-sys_siglist (); ++return sys_siglist (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_c_sys_siglist=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_c_sys_siglist=no ++ ac_cv_lib_c_sys_siglist=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_c_sys_siglist" >&5 +-echo "${ECHO_T}$ac_cv_lib_c_sys_siglist" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_c_sys_siglist" >&5 ++echo "${ECHO_T}$ac_cv_lib_c_sys_siglist" >&6; } + if test $ac_cv_lib_c_sys_siglist = yes; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_SYS_SIGLIST 1 +@@ -4785,8 +4986,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for gai_strerror" >&5 +-echo $ECHO_N "checking for gai_strerror... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for gai_strerror" >&5 ++echo $ECHO_N "checking for gai_strerror... $ECHO_C" >&6; } + if test "${ac_cv_func_gai_strerror+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4813,68 +5014,59 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef gai_strerror + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char gai_strerror (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_gai_strerror) || defined (__stub___gai_strerror) ++#if defined __stub_gai_strerror || defined __stub___gai_strerror + choke me +-#else +-char (*f) () = gai_strerror; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != gai_strerror; ++return gai_strerror (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_gai_strerror=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_gai_strerror=no ++ ac_cv_func_gai_strerror=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_gai_strerror" >&5 +-echo "${ECHO_T}$ac_cv_func_gai_strerror" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_gai_strerror" >&5 ++echo "${ECHO_T}$ac_cv_func_gai_strerror" >&6; } + if test $ac_cv_func_gai_strerror = yes; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_GAI_STRERROR 1 +@@ -4882,8 +5074,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for freeaddrinfo" >&5 +-echo $ECHO_N "checking for freeaddrinfo... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for freeaddrinfo" >&5 ++echo $ECHO_N "checking for freeaddrinfo... $ECHO_C" >&6; } + if test "${ac_cv_func_freeaddrinfo+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4910,68 +5102,59 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef freeaddrinfo + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char freeaddrinfo (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_freeaddrinfo) || defined (__stub___freeaddrinfo) ++#if defined __stub_freeaddrinfo || defined __stub___freeaddrinfo + choke me +-#else +-char (*f) () = freeaddrinfo; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != freeaddrinfo; ++return freeaddrinfo (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_freeaddrinfo=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_freeaddrinfo=no ++ ac_cv_func_freeaddrinfo=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_freeaddrinfo" >&5 +-echo "${ECHO_T}$ac_cv_func_freeaddrinfo" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_freeaddrinfo" >&5 ++echo "${ECHO_T}$ac_cv_func_freeaddrinfo" >&6; } + if test $ac_cv_func_freeaddrinfo = yes; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_FREEADDRINFO 1 +@@ -4979,8 +5162,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for getaddrinfo" >&5 +-echo $ECHO_N "checking for getaddrinfo... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for getaddrinfo" >&5 ++echo $ECHO_N "checking for getaddrinfo... $ECHO_C" >&6; } + if test "${ac_cv_func_getaddrinfo+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5007,68 +5190,59 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef getaddrinfo + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char getaddrinfo (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_getaddrinfo) || defined (__stub___getaddrinfo) ++#if defined __stub_getaddrinfo || defined __stub___getaddrinfo + choke me +-#else +-char (*f) () = getaddrinfo; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != getaddrinfo; ++return getaddrinfo (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_getaddrinfo=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_getaddrinfo=no ++ ac_cv_func_getaddrinfo=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_getaddrinfo" >&5 +-echo "${ECHO_T}$ac_cv_func_getaddrinfo" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_getaddrinfo" >&5 ++echo "${ECHO_T}$ac_cv_func_getaddrinfo" >&6; } + if test $ac_cv_func_getaddrinfo = yes; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_GETADDRINFO 1 +@@ -5082,8 +5256,8 @@ ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= +@@ -5117,24 +5291,22 @@ cat >>conftest.$ac_ext <<_ACEOF + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else + echo "$as_me: failed program was:" >&5 +@@ -5143,9 +5315,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5155,24 +5328,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +@@ -5183,6 +5354,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -5200,8 +5372,8 @@ fi + else + ac_cv_prog_CPP=$CPP + fi +-echo "$as_me:$LINENO: result: $CPP" >&5 +-echo "${ECHO_T}$CPP" >&6 ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do +@@ -5224,24 +5396,22 @@ cat >>conftest.$ac_ext <<_ACEOF + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else + echo "$as_me: failed program was:" >&5 +@@ -5250,9 +5420,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5262,24 +5433,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +@@ -5290,6 +5459,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -5312,23 +5482,170 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-echo "$as_me:$LINENO: checking for egrep" >&5 +-echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +-if test "${ac_cv_prog_egrep+set}" = set; then ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_GREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_GREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' ++ ac_path_EGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_EGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_EGREP=$EGREP + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +-echo "${ECHO_T}$ac_cv_prog_egrep" >&6 +- EGREP=$ac_cv_prog_egrep + + +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } + if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5352,35 +5669,31 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_header_stdc=no ++ ac_cv_header_stdc=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +@@ -5436,6 +5749,7 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include ++#include + #if ((' ' & 0x0FF) == 0x020) + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +@@ -5455,18 +5769,27 @@ main () + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) +- exit(2); +- exit (0); ++ return 2; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5479,12 +5802,14 @@ sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) + ac_cv_header_stdc=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -5507,9 +5832,9 @@ for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -5523,38 +5848,35 @@ $ac_includes_default + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_Header=no" ++ eval "$as_ac_Header=no" + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +@@ -5579,18 +5901,19 @@ done + for ac_header in sys/types.h sys/termios.h termios.h sys/ioctl.h sys/select.h rpc/rpc.h rpc/rpcent.h sys/file.h ftw.h machine/reg.h netdb.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5601,41 +5924,37 @@ $ac_includes_default + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5644,24 +5963,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -5669,9 +5986,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -5695,25 +6013,19 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -5726,17 +6038,17 @@ fi + done + + if test "${ac_cv_header_sys_resource_h+set}" = set; then +- echo "$as_me:$LINENO: checking for sys/resource.h" >&5 +-echo $ECHO_N "checking for sys/resource.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for sys/resource.h" >&5 ++echo $ECHO_N "checking for sys/resource.h... $ECHO_C" >&6; } + if test "${ac_cv_header_sys_resource_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_resource_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_resource_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_resource_h" >&5 ++echo "${ECHO_T}$ac_cv_header_sys_resource_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking sys/resource.h usability" >&5 +-echo $ECHO_N "checking sys/resource.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking sys/resource.h usability" >&5 ++echo $ECHO_N "checking sys/resource.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5747,41 +6059,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking sys/resource.h presence" >&5 +-echo $ECHO_N "checking sys/resource.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking sys/resource.h presence" >&5 ++echo $ECHO_N "checking sys/resource.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5790,24 +6098,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -5815,9 +6121,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -5841,25 +6148,18 @@ echo "$as_me: WARNING: sys/resource.h: section \"Present But Cannot Be Compi + echo "$as_me: WARNING: sys/resource.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/resource.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: sys/resource.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for sys/resource.h" >&5 +-echo $ECHO_N "checking for sys/resource.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for sys/resource.h" >&5 ++echo $ECHO_N "checking for sys/resource.h... $ECHO_C" >&6; } + if test "${ac_cv_header_sys_resource_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_sys_resource_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_resource_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_resource_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_resource_h" >&5 ++echo "${ECHO_T}$ac_cv_header_sys_resource_h" >&6; } + + fi + if test $ac_cv_header_sys_resource_h = yes; then +@@ -5871,17 +6171,17 @@ fi + + + if test "${ac_cv_header_arpa_inet_h+set}" = set; then +- echo "$as_me:$LINENO: checking for arpa/inet.h" >&5 +-echo $ECHO_N "checking for arpa/inet.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for arpa/inet.h" >&5 ++echo $ECHO_N "checking for arpa/inet.h... $ECHO_C" >&6; } + if test "${ac_cv_header_arpa_inet_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_arpa_inet_h" >&5 +-echo "${ECHO_T}$ac_cv_header_arpa_inet_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_arpa_inet_h" >&5 ++echo "${ECHO_T}$ac_cv_header_arpa_inet_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking arpa/inet.h usability" >&5 +-echo $ECHO_N "checking arpa/inet.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking arpa/inet.h usability" >&5 ++echo $ECHO_N "checking arpa/inet.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5892,41 +6192,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking arpa/inet.h presence" >&5 +-echo $ECHO_N "checking arpa/inet.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking arpa/inet.h presence" >&5 ++echo $ECHO_N "checking arpa/inet.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5935,24 +6231,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -5960,9 +6254,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -5986,25 +6281,18 @@ echo "$as_me: WARNING: arpa/inet.h: section \"Present But Cannot Be Compiled + echo "$as_me: WARNING: arpa/inet.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: arpa/inet.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: arpa/inet.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for arpa/inet.h" >&5 +-echo $ECHO_N "checking for arpa/inet.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for arpa/inet.h" >&5 ++echo $ECHO_N "checking for arpa/inet.h... $ECHO_C" >&6; } + if test "${ac_cv_header_arpa_inet_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_arpa_inet_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_arpa_inet_h" >&5 +-echo "${ECHO_T}$ac_cv_header_arpa_inet_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_arpa_inet_h" >&5 ++echo "${ECHO_T}$ac_cv_header_arpa_inet_h" >&6; } + + fi + if test $ac_cv_header_arpa_inet_h = yes; then +@@ -6016,17 +6304,17 @@ fi + + + if test "${ac_cv_header_grp_h+set}" = set; then +- echo "$as_me:$LINENO: checking for grp.h" >&5 +-echo $ECHO_N "checking for grp.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for grp.h" >&5 ++echo $ECHO_N "checking for grp.h... $ECHO_C" >&6; } + if test "${ac_cv_header_grp_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_grp_h" >&5 +-echo "${ECHO_T}$ac_cv_header_grp_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_grp_h" >&5 ++echo "${ECHO_T}$ac_cv_header_grp_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking grp.h usability" >&5 +-echo $ECHO_N "checking grp.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking grp.h usability" >&5 ++echo $ECHO_N "checking grp.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6037,41 +6325,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking grp.h presence" >&5 +-echo $ECHO_N "checking grp.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking grp.h presence" >&5 ++echo $ECHO_N "checking grp.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6080,24 +6364,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -6105,9 +6387,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -6131,25 +6414,18 @@ echo "$as_me: WARNING: grp.h: section \"Present But Cannot Be Compiled\"" >& + echo "$as_me: WARNING: grp.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: grp.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: grp.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for grp.h" >&5 +-echo $ECHO_N "checking for grp.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for grp.h" >&5 ++echo $ECHO_N "checking for grp.h... $ECHO_C" >&6; } + if test "${ac_cv_header_grp_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_grp_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_grp_h" >&5 +-echo "${ECHO_T}$ac_cv_header_grp_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_grp_h" >&5 ++echo "${ECHO_T}$ac_cv_header_grp_h" >&6; } + + fi + if test $ac_cv_header_grp_h = yes; then +@@ -6161,17 +6437,17 @@ fi + + + if test "${ac_cv_header_rpc_pmap_clnt_h+set}" = set; then +- echo "$as_me:$LINENO: checking for rpc/pmap_clnt.h" >&5 +-echo $ECHO_N "checking for rpc/pmap_clnt.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for rpc/pmap_clnt.h" >&5 ++echo $ECHO_N "checking for rpc/pmap_clnt.h... $ECHO_C" >&6; } + if test "${ac_cv_header_rpc_pmap_clnt_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_rpc_pmap_clnt_h" >&5 +-echo "${ECHO_T}$ac_cv_header_rpc_pmap_clnt_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_rpc_pmap_clnt_h" >&5 ++echo "${ECHO_T}$ac_cv_header_rpc_pmap_clnt_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking rpc/pmap_clnt.h usability" >&5 +-echo $ECHO_N "checking rpc/pmap_clnt.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking rpc/pmap_clnt.h usability" >&5 ++echo $ECHO_N "checking rpc/pmap_clnt.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6182,41 +6458,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking rpc/pmap_clnt.h presence" >&5 +-echo $ECHO_N "checking rpc/pmap_clnt.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking rpc/pmap_clnt.h presence" >&5 ++echo $ECHO_N "checking rpc/pmap_clnt.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6225,24 +6497,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -6250,9 +6520,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -6276,25 +6547,18 @@ echo "$as_me: WARNING: rpc/pmap_clnt.h: section \"Present But Cannot Be Comp + echo "$as_me: WARNING: rpc/pmap_clnt.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: rpc/pmap_clnt.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: rpc/pmap_clnt.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for rpc/pmap_clnt.h" >&5 +-echo $ECHO_N "checking for rpc/pmap_clnt.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for rpc/pmap_clnt.h" >&5 ++echo $ECHO_N "checking for rpc/pmap_clnt.h... $ECHO_C" >&6; } + if test "${ac_cv_header_rpc_pmap_clnt_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_rpc_pmap_clnt_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_rpc_pmap_clnt_h" >&5 +-echo "${ECHO_T}$ac_cv_header_rpc_pmap_clnt_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_rpc_pmap_clnt_h" >&5 ++echo "${ECHO_T}$ac_cv_header_rpc_pmap_clnt_h" >&6; } + + fi + if test $ac_cv_header_rpc_pmap_clnt_h = yes; then +@@ -6306,17 +6570,17 @@ fi + + + if test "${ac_cv_header_sys_socket_h+set}" = set; then +- echo "$as_me:$LINENO: checking for sys/socket.h" >&5 +-echo $ECHO_N "checking for sys/socket.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for sys/socket.h" >&5 ++echo $ECHO_N "checking for sys/socket.h... $ECHO_C" >&6; } + if test "${ac_cv_header_sys_socket_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_socket_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_socket_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_socket_h" >&5 ++echo "${ECHO_T}$ac_cv_header_sys_socket_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking sys/socket.h usability" >&5 +-echo $ECHO_N "checking sys/socket.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking sys/socket.h usability" >&5 ++echo $ECHO_N "checking sys/socket.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6327,41 +6591,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking sys/socket.h presence" >&5 +-echo $ECHO_N "checking sys/socket.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking sys/socket.h presence" >&5 ++echo $ECHO_N "checking sys/socket.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6370,24 +6630,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -6395,9 +6653,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -6421,25 +6680,18 @@ echo "$as_me: WARNING: sys/socket.h: section \"Present But Cannot Be Compile + echo "$as_me: WARNING: sys/socket.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/socket.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: sys/socket.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for sys/socket.h" >&5 +-echo $ECHO_N "checking for sys/socket.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for sys/socket.h" >&5 ++echo $ECHO_N "checking for sys/socket.h... $ECHO_C" >&6; } + if test "${ac_cv_header_sys_socket_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_sys_socket_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_socket_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_socket_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_socket_h" >&5 ++echo "${ECHO_T}$ac_cv_header_sys_socket_h" >&6; } + + fi + if test $ac_cv_header_sys_socket_h = yes; then +@@ -6451,17 +6703,17 @@ fi + + + if test "${ac_cv_header_sys_signal_h+set}" = set; then +- echo "$as_me:$LINENO: checking for sys/signal.h" >&5 +-echo $ECHO_N "checking for sys/signal.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for sys/signal.h" >&5 ++echo $ECHO_N "checking for sys/signal.h... $ECHO_C" >&6; } + if test "${ac_cv_header_sys_signal_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_signal_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_signal_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_signal_h" >&5 ++echo "${ECHO_T}$ac_cv_header_sys_signal_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking sys/signal.h usability" >&5 +-echo $ECHO_N "checking sys/signal.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking sys/signal.h usability" >&5 ++echo $ECHO_N "checking sys/signal.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6472,41 +6724,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking sys/signal.h presence" >&5 +-echo $ECHO_N "checking sys/signal.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking sys/signal.h presence" >&5 ++echo $ECHO_N "checking sys/signal.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6515,24 +6763,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -6540,9 +6786,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -6566,25 +6813,18 @@ echo "$as_me: WARNING: sys/signal.h: section \"Present But Cannot Be Compile + echo "$as_me: WARNING: sys/signal.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/signal.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: sys/signal.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for sys/signal.h" >&5 +-echo $ECHO_N "checking for sys/signal.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for sys/signal.h" >&5 ++echo $ECHO_N "checking for sys/signal.h... $ECHO_C" >&6; } + if test "${ac_cv_header_sys_signal_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_sys_signal_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_signal_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_signal_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_signal_h" >&5 ++echo "${ECHO_T}$ac_cv_header_sys_signal_h" >&6; } + + fi + if test $ac_cv_header_sys_signal_h = yes; then +@@ -6596,17 +6836,17 @@ fi + + + if test "${ac_cv_header_crypt_h+set}" = set; then +- echo "$as_me:$LINENO: checking for crypt.h" >&5 +-echo $ECHO_N "checking for crypt.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for crypt.h" >&5 ++echo $ECHO_N "checking for crypt.h... $ECHO_C" >&6; } + if test "${ac_cv_header_crypt_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_crypt_h" >&5 +-echo "${ECHO_T}$ac_cv_header_crypt_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_crypt_h" >&5 ++echo "${ECHO_T}$ac_cv_header_crypt_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking crypt.h usability" >&5 +-echo $ECHO_N "checking crypt.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking crypt.h usability" >&5 ++echo $ECHO_N "checking crypt.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6617,41 +6857,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking crypt.h presence" >&5 +-echo $ECHO_N "checking crypt.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking crypt.h presence" >&5 ++echo $ECHO_N "checking crypt.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6660,24 +6896,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -6685,9 +6919,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -6711,25 +6946,18 @@ echo "$as_me: WARNING: crypt.h: section \"Present But Cannot Be Compiled\"" + echo "$as_me: WARNING: crypt.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: crypt.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: crypt.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for crypt.h" >&5 +-echo $ECHO_N "checking for crypt.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for crypt.h" >&5 ++echo $ECHO_N "checking for crypt.h... $ECHO_C" >&6; } + if test "${ac_cv_header_crypt_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_crypt_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_crypt_h" >&5 +-echo "${ECHO_T}$ac_cv_header_crypt_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_crypt_h" >&5 ++echo "${ECHO_T}$ac_cv_header_crypt_h" >&6; } + + fi + if test $ac_cv_header_crypt_h = yes; then +@@ -6741,17 +6969,17 @@ fi + + + if test "${ac_cv_header_stdint_h+set}" = set; then +- echo "$as_me:$LINENO: checking for stdint.h" >&5 +-echo $ECHO_N "checking for stdint.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for stdint.h" >&5 ++echo $ECHO_N "checking for stdint.h... $ECHO_C" >&6; } + if test "${ac_cv_header_stdint_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdint_h" >&5 +-echo "${ECHO_T}$ac_cv_header_stdint_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdint_h" >&5 ++echo "${ECHO_T}$ac_cv_header_stdint_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking stdint.h usability" >&5 +-echo $ECHO_N "checking stdint.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking stdint.h usability" >&5 ++echo $ECHO_N "checking stdint.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6762,41 +6990,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking stdint.h presence" >&5 +-echo $ECHO_N "checking stdint.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking stdint.h presence" >&5 ++echo $ECHO_N "checking stdint.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6805,24 +7029,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -6830,9 +7052,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -6856,25 +7079,18 @@ echo "$as_me: WARNING: stdint.h: section \"Present But Cannot Be Compiled\"" + echo "$as_me: WARNING: stdint.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: stdint.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: stdint.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for stdint.h" >&5 +-echo $ECHO_N "checking for stdint.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for stdint.h" >&5 ++echo $ECHO_N "checking for stdint.h... $ECHO_C" >&6; } + if test "${ac_cv_header_stdint_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_stdint_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdint_h" >&5 +-echo "${ECHO_T}$ac_cv_header_stdint_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdint_h" >&5 ++echo "${ECHO_T}$ac_cv_header_stdint_h" >&6; } + + fi + if test $ac_cv_header_stdint_h = yes; then +@@ -6886,17 +7102,17 @@ fi + + + if test "${ac_cv_header_stdbool_h+set}" = set; then +- echo "$as_me:$LINENO: checking for stdbool.h" >&5 +-echo $ECHO_N "checking for stdbool.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for stdbool.h" >&5 ++echo $ECHO_N "checking for stdbool.h... $ECHO_C" >&6; } + if test "${ac_cv_header_stdbool_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5 +-echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5 ++echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking stdbool.h usability" >&5 +-echo $ECHO_N "checking stdbool.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking stdbool.h usability" >&5 ++echo $ECHO_N "checking stdbool.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6907,41 +7123,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking stdbool.h presence" >&5 +-echo $ECHO_N "checking stdbool.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking stdbool.h presence" >&5 ++echo $ECHO_N "checking stdbool.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6950,24 +7162,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -6975,9 +7185,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -7001,25 +7212,18 @@ echo "$as_me: WARNING: stdbool.h: section \"Present But Cannot Be Compiled\" + echo "$as_me: WARNING: stdbool.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: stdbool.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: stdbool.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for stdbool.h" >&5 +-echo $ECHO_N "checking for stdbool.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for stdbool.h" >&5 ++echo $ECHO_N "checking for stdbool.h... $ECHO_C" >&6; } + if test "${ac_cv_header_stdbool_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_stdbool_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5 +-echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5 ++echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6; } + + fi + if test $ac_cv_header_stdbool_h = yes; then +@@ -7031,17 +7235,17 @@ fi + + + if test "${ac_cv_header_sys_filio_h+set}" = set; then +- echo "$as_me:$LINENO: checking for sys/filio.h" >&5 +-echo $ECHO_N "checking for sys/filio.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for sys/filio.h" >&5 ++echo $ECHO_N "checking for sys/filio.h... $ECHO_C" >&6; } + if test "${ac_cv_header_sys_filio_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_filio_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_filio_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_filio_h" >&5 ++echo "${ECHO_T}$ac_cv_header_sys_filio_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking sys/filio.h usability" >&5 +-echo $ECHO_N "checking sys/filio.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking sys/filio.h usability" >&5 ++echo $ECHO_N "checking sys/filio.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -7052,41 +7256,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking sys/filio.h presence" >&5 +-echo $ECHO_N "checking sys/filio.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking sys/filio.h presence" >&5 ++echo $ECHO_N "checking sys/filio.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -7095,24 +7295,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -7120,9 +7318,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -7146,25 +7345,18 @@ echo "$as_me: WARNING: sys/filio.h: section \"Present But Cannot Be Compiled + echo "$as_me: WARNING: sys/filio.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/filio.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: sys/filio.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for sys/filio.h" >&5 +-echo $ECHO_N "checking for sys/filio.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for sys/filio.h" >&5 ++echo $ECHO_N "checking for sys/filio.h... $ECHO_C" >&6; } + if test "${ac_cv_header_sys_filio_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_sys_filio_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_filio_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_filio_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_filio_h" >&5 ++echo "${ECHO_T}$ac_cv_header_sys_filio_h" >&6; } + + fi + if test $ac_cv_header_sys_filio_h = yes; then +@@ -7176,17 +7368,17 @@ fi + + + if test "${ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h+set}" = set; then +- echo "$as_me:$LINENO: checking for DNSServiceDiscovery/DNSServiceDiscovery.h" >&5 +-echo $ECHO_N "checking for DNSServiceDiscovery/DNSServiceDiscovery.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for DNSServiceDiscovery/DNSServiceDiscovery.h" >&5 ++echo $ECHO_N "checking for DNSServiceDiscovery/DNSServiceDiscovery.h... $ECHO_C" >&6; } + if test "${ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h" >&5 +-echo "${ECHO_T}$ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h" >&5 ++echo "${ECHO_T}$ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking DNSServiceDiscovery/DNSServiceDiscovery.h usability" >&5 +-echo $ECHO_N "checking DNSServiceDiscovery/DNSServiceDiscovery.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking DNSServiceDiscovery/DNSServiceDiscovery.h usability" >&5 ++echo $ECHO_N "checking DNSServiceDiscovery/DNSServiceDiscovery.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -7197,41 +7389,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking DNSServiceDiscovery/DNSServiceDiscovery.h presence" >&5 +-echo $ECHO_N "checking DNSServiceDiscovery/DNSServiceDiscovery.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking DNSServiceDiscovery/DNSServiceDiscovery.h presence" >&5 ++echo $ECHO_N "checking DNSServiceDiscovery/DNSServiceDiscovery.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -7240,24 +7428,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -7265,9 +7451,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -7291,25 +7478,18 @@ echo "$as_me: WARNING: DNSServiceDiscovery/DNSServiceDiscovery.h: section \" + echo "$as_me: WARNING: DNSServiceDiscovery/DNSServiceDiscovery.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: DNSServiceDiscovery/DNSServiceDiscovery.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: DNSServiceDiscovery/DNSServiceDiscovery.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for DNSServiceDiscovery/DNSServiceDiscovery.h" >&5 +-echo $ECHO_N "checking for DNSServiceDiscovery/DNSServiceDiscovery.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for DNSServiceDiscovery/DNSServiceDiscovery.h" >&5 ++echo $ECHO_N "checking for DNSServiceDiscovery/DNSServiceDiscovery.h... $ECHO_C" >&6; } + if test "${ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h" >&5 +-echo "${ECHO_T}$ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h" >&5 ++echo "${ECHO_T}$ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h" >&6; } + + fi + if test $ac_cv_header_DNSServiceDiscovery_DNSServiceDiscovery_h = yes; then +@@ -7325,25 +7505,25 @@ fi + + + +-# Check whether --with-howl or --without-howl was given. ++# Check whether --with-howl was given. + if test "${with_howl+set}" = set; then +- withval="$with_howl" +- OLDCFLAGS=$CFLAGS; CFLAGS="-I$withval/include/howl/ $CFLAGS"; ++ withval=$with_howl; OLDCFLAGS=$CFLAGS; CFLAGS="-I$withval/include/howl/ $CFLAGS"; + OLDLDFLAGS=$LDFLAGS; LDFLAGS="-L$withval/lib/ $LDFLAGS"; + OLDCPPFLAGS=$CPPFLAGS; CPPFLAGS="-I$withval/include/howl/ $CPPFLAGS"; + as_ac_Header=`echo "ac_cv_header_$withval/include/howl/howl.h" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $withval/include/howl/howl.h" >&5 +-echo $ECHO_N "checking for $withval/include/howl/howl.h... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $withval/include/howl/howl.h" >&5 ++echo $ECHO_N "checking for $withval/include/howl/howl.h... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $withval/include/howl/howl.h usability" >&5 +-echo $ECHO_N "checking $withval/include/howl/howl.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $withval/include/howl/howl.h usability" >&5 ++echo $ECHO_N "checking $withval/include/howl/howl.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -7354,41 +7534,37 @@ $ac_includes_default + #include <$withval/include/howl/howl.h> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $withval/include/howl/howl.h presence" >&5 +-echo $ECHO_N "checking $withval/include/howl/howl.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $withval/include/howl/howl.h presence" >&5 ++echo $ECHO_N "checking $withval/include/howl/howl.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -7397,24 +7573,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include <$withval/include/howl/howl.h> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -7422,9 +7596,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -7448,25 +7623,19 @@ echo "$as_me: WARNING: $withval/include/howl/howl.h: section \"Present But C + echo "$as_me: WARNING: $withval/include/howl/howl.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $withval/include/howl/howl.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $withval/include/howl/howl.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $withval/include/howl/howl.h" >&5 +-echo $ECHO_N "checking for $withval/include/howl/howl.h... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $withval/include/howl/howl.h" >&5 ++echo $ECHO_N "checking for $withval/include/howl/howl.h... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -7482,8 +7651,8 @@ else + fi + + +- echo "$as_me:$LINENO: checking for sw_discovery_publish in -lhowl" >&5 +-echo $ECHO_N "checking for sw_discovery_publish in -lhowl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for sw_discovery_publish in -lhowl" >&5 ++echo $ECHO_N "checking for sw_discovery_publish in -lhowl... $ECHO_C" >&6; } + if test "${ac_cv_lib_howl_sw_discovery_publish+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7496,63 +7665,60 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char sw_discovery_publish (); + int + main () + { +-sw_discovery_publish (); ++return sw_discovery_publish (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_howl_sw_discovery_publish=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_howl_sw_discovery_publish=no ++ ac_cv_lib_howl_sw_discovery_publish=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_howl_sw_discovery_publish" >&5 +-echo "${ECHO_T}$ac_cv_lib_howl_sw_discovery_publish" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_howl_sw_discovery_publish" >&5 ++echo "${ECHO_T}$ac_cv_lib_howl_sw_discovery_publish" >&6; } + if test $ac_cv_lib_howl_sw_discovery_publish = yes; then + LIBS="-lhowl $LIBS" + else + + OLDLIBS=$LIBS; LIBS="-lpthread $LIBS"; +- echo "$as_me:$LINENO: checking for main in -lhowl" >&5 +-echo $ECHO_N "checking for main in -lhowl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for main in -lhowl" >&5 ++echo $ECHO_N "checking for main in -lhowl... $ECHO_C" >&6; } + if test "${ac_cv_lib_howl_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7569,46 +7735,43 @@ cat >>conftest.$ac_ext <<_ACEOF + int + main () + { +-main (); ++return main (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_howl_main=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_howl_main=no ++ ac_cv_lib_howl_main=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_howl_main" >&5 +-echo "${ECHO_T}$ac_cv_lib_howl_main" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_howl_main" >&5 ++echo "${ECHO_T}$ac_cv_lib_howl_main" >&6; } + if test $ac_cv_lib_howl_main = yes; then + LIBS="-lhowl $LIBS" + else +@@ -7619,10 +7782,11 @@ fi + fi + + +-fi; ++fi ++ + +-echo "$as_me:$LINENO: checking for uint16_t" >&5 +-echo $ECHO_N "checking for uint16_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for uint16_t" >&5 ++echo $ECHO_N "checking for uint16_t... $ECHO_C" >&6; } + if test "${xinetd_cv_type_uint16_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7658,8 +7822,8 @@ fi + rm -f conftest* + + fi +-echo "$as_me:$LINENO: result: $xinetd_cv_type_uint16_t" >&5 +-echo "${ECHO_T}$xinetd_cv_type_uint16_t" >&6 ++{ echo "$as_me:$LINENO: result: $xinetd_cv_type_uint16_t" >&5 ++echo "${ECHO_T}$xinetd_cv_type_uint16_t" >&6; } + if test $xinetd_cv_type_uint16_t = no; then + cat >>confdefs.h <<\_ACEOF + #define uint16_t unsigned short +@@ -7667,8 +7831,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for uint32_t" >&5 +-echo $ECHO_N "checking for uint32_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for uint32_t" >&5 ++echo $ECHO_N "checking for uint32_t... $ECHO_C" >&6; } + if test "${xinetd_cv_type_uint32_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7704,8 +7868,8 @@ fi + rm -f conftest* + + fi +-echo "$as_me:$LINENO: result: $xinetd_cv_type_uint32_t" >&5 +-echo "${ECHO_T}$xinetd_cv_type_uint32_t" >&6 ++{ echo "$as_me:$LINENO: result: $xinetd_cv_type_uint32_t" >&5 ++echo "${ECHO_T}$xinetd_cv_type_uint32_t" >&6; } + if test $xinetd_cv_type_uint32_t = no; then + cat >>confdefs.h <<\_ACEOF + #define uint32_t unsigned int +@@ -7713,8 +7877,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for uint64_t" >&5 +-echo $ECHO_N "checking for uint64_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for uint64_t" >&5 ++echo $ECHO_N "checking for uint64_t... $ECHO_C" >&6; } + if test "${xinetd_cv_type_uint64_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7750,8 +7914,8 @@ fi + rm -f conftest* + + fi +-echo "$as_me:$LINENO: result: $xinetd_cv_type_uint64_t" >&5 +-echo "${ECHO_T}$xinetd_cv_type_uint64_t" >&6 ++{ echo "$as_me:$LINENO: result: $xinetd_cv_type_uint64_t" >&5 ++echo "${ECHO_T}$xinetd_cv_type_uint64_t" >&6; } + if test $xinetd_cv_type_uint64_t = no; then + cat >>confdefs.h <<\_ACEOF + #define uint64_t unsigned long long +@@ -7759,8 +7923,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for uid_t" >&5 +-echo $ECHO_N "checking for uid_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for uid_t" >&5 ++echo $ECHO_N "checking for uid_t... $ECHO_C" >&6; } + if test "${xinetd_cv_type_uid_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7796,8 +7960,8 @@ fi + rm -f conftest* + + fi +-echo "$as_me:$LINENO: result: $xinetd_cv_type_uid_t" >&5 +-echo "${ECHO_T}$xinetd_cv_type_uid_t" >&6 ++{ echo "$as_me:$LINENO: result: $xinetd_cv_type_uid_t" >&5 ++echo "${ECHO_T}$xinetd_cv_type_uid_t" >&6; } + if test $xinetd_cv_type_uid_t = no; then + cat >>confdefs.h <<\_ACEOF + #define uid_t unsigned int +@@ -7805,8 +7969,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for gid_t" >&5 +-echo $ECHO_N "checking for gid_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for gid_t" >&5 ++echo $ECHO_N "checking for gid_t... $ECHO_C" >&6; } + if test "${xinetd_cv_type_gid_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7842,8 +8006,8 @@ fi + rm -f conftest* + + fi +-echo "$as_me:$LINENO: result: $xinetd_cv_type_gid_t" >&5 +-echo "${ECHO_T}$xinetd_cv_type_gid_t" >&6 ++{ echo "$as_me:$LINENO: result: $xinetd_cv_type_gid_t" >&5 ++echo "${ECHO_T}$xinetd_cv_type_gid_t" >&6; } + if test $xinetd_cv_type_gid_t = no; then + cat >>confdefs.h <<\_ACEOF + #define gid_t unsigned int +@@ -7851,8 +8015,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for socklen_t" >&5 +-echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for socklen_t" >&5 ++echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6; } + if test "${xinetd_cv_type_socklen_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7888,8 +8052,8 @@ fi + rm -f conftest* + + fi +-echo "$as_me:$LINENO: result: $xinetd_cv_type_socklen_t" >&5 +-echo "${ECHO_T}$xinetd_cv_type_socklen_t" >&6 ++{ echo "$as_me:$LINENO: result: $xinetd_cv_type_socklen_t" >&5 ++echo "${ECHO_T}$xinetd_cv_type_socklen_t" >&6; } + if test $xinetd_cv_type_socklen_t = no; then + cat >>confdefs.h <<\_ACEOF + #define socklen_t unsigned int +@@ -7897,8 +8061,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for rlim_t" >&5 +-echo $ECHO_N "checking for rlim_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for rlim_t" >&5 ++echo $ECHO_N "checking for rlim_t... $ECHO_C" >&6; } + if test "${xinetd_cv_type_rlim_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7934,8 +8098,8 @@ fi + rm -f conftest* + + fi +-echo "$as_me:$LINENO: result: $xinetd_cv_type_rlim_t" >&5 +-echo "${ECHO_T}$xinetd_cv_type_rlim_t" >&6 ++{ echo "$as_me:$LINENO: result: $xinetd_cv_type_rlim_t" >&5 ++echo "${ECHO_T}$xinetd_cv_type_rlim_t" >&6; } + if test $xinetd_cv_type_rlim_t = no; then + cat >>confdefs.h <<\_ACEOF + #define rlim_t long long +@@ -7944,8 +8108,8 @@ _ACEOF + fi + + +-echo "$as_me:$LINENO: checking for struct addrinfo" >&5 +-echo $ECHO_N "checking for struct addrinfo... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for struct addrinfo" >&5 ++echo $ECHO_N "checking for struct addrinfo... $ECHO_C" >&6; } + if test "${ac_cv_have_struct_addrinfo+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7972,40 +8136,36 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_have_struct_addrinfo="yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_have_struct_addrinfo="no" ++ ac_cv_have_struct_addrinfo="no" + + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_have_struct_addrinfo" >&5 +-echo "${ECHO_T}$ac_cv_have_struct_addrinfo" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_have_struct_addrinfo" >&5 ++echo "${ECHO_T}$ac_cv_have_struct_addrinfo" >&6; } + if test "x$ac_cv_have_struct_addrinfo" = "xyes" ; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_STRUCT_ADDRINFO 1 +@@ -8013,8 +8173,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for struct in6_addr" >&5 +-echo $ECHO_N "checking for struct in6_addr... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for struct in6_addr" >&5 ++echo $ECHO_N "checking for struct in6_addr... $ECHO_C" >&6; } + if test "${ac_cv_have_struct_in6_addr+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8038,40 +8198,36 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_have_struct_in6_addr="yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_have_struct_in6_addr="no" ++ ac_cv_have_struct_in6_addr="no" + + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_have_struct_in6_addr" >&5 +-echo "${ECHO_T}$ac_cv_have_struct_in6_addr" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_have_struct_in6_addr" >&5 ++echo "${ECHO_T}$ac_cv_have_struct_in6_addr" >&6; } + if test "x$ac_cv_have_struct_in6_addr" = "xyes" ; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_STRUCT_IN6_ADDR 1 +@@ -8079,8 +8235,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for struct sockaddr_in6" >&5 +-echo $ECHO_N "checking for struct sockaddr_in6... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for struct sockaddr_in6" >&5 ++echo $ECHO_N "checking for struct sockaddr_in6... $ECHO_C" >&6; } + if test "${ac_cv_have_struct_sockaddr_in6+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8104,40 +8260,36 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_have_struct_sockaddr_in6="yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_have_struct_sockaddr_in6="no" ++ ac_cv_have_struct_sockaddr_in6="no" + + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_have_struct_sockaddr_in6" >&5 +-echo "${ECHO_T}$ac_cv_have_struct_sockaddr_in6" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_have_struct_sockaddr_in6" >&5 ++echo "${ECHO_T}$ac_cv_have_struct_sockaddr_in6" >&6; } + if test "x$ac_cv_have_struct_sockaddr_in6" = "xyes" ; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_STRUCT_SOCKADDR_IN6 1 +@@ -8145,8 +8297,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for struct sockaddr_storage" >&5 +-echo $ECHO_N "checking for struct sockaddr_storage... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for struct sockaddr_storage" >&5 ++echo $ECHO_N "checking for struct sockaddr_storage... $ECHO_C" >&6; } + if test "${ac_cv_have_struct_sockaddr_storage+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8170,40 +8322,36 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_have_struct_sockaddr_storage="yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_have_struct_sockaddr_storage="no" ++ ac_cv_have_struct_sockaddr_storage="no" + + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_have_struct_sockaddr_storage" >&5 +-echo "${ECHO_T}$ac_cv_have_struct_sockaddr_storage" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_have_struct_sockaddr_storage" >&5 ++echo "${ECHO_T}$ac_cv_have_struct_sockaddr_storage" >&6; } + if test "x$ac_cv_have_struct_sockaddr_storage" = "xyes" ; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_STRUCT_SOCKADDR_STORAGE 1 +@@ -8224,23 +8372,22 @@ _ACEOF + _ACEOF + + +- echo "$as_me:$LINENO: checking whether to compile in loadavg" >&5 +-echo $ECHO_N "checking whether to compile in loadavg... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether to compile in loadavg" >&5 ++echo $ECHO_N "checking whether to compile in loadavg... $ECHO_C" >&6; } + +-# Check whether --with-loadavg or --without-loadavg was given. ++# Check whether --with-loadavg was given. + if test "${with_loadavg+set}" = set; then +- withval="$with_loadavg" +- case "$withval" in ++ withval=$with_loadavg; case "$withval" in + no) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + yes) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + +-echo "$as_me:$LINENO: checking for main in -lkstat" >&5 +-echo $ECHO_N "checking for main in -lkstat... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for main in -lkstat" >&5 ++echo $ECHO_N "checking for main in -lkstat... $ECHO_C" >&6; } + if test "${ac_cv_lib_kstat_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8257,46 +8404,43 @@ cat >>conftest.$ac_ext <<_ACEOF + int + main () + { +-main (); ++return main (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_kstat_main=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_kstat_main=no ++ ac_cv_lib_kstat_main=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_kstat_main" >&5 +-echo "${ECHO_T}$ac_cv_lib_kstat_main" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_kstat_main" >&5 ++echo "${ECHO_T}$ac_cv_lib_kstat_main" >&6; } + if test $ac_cv_lib_kstat_main = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBKSTAT 1 +@@ -8307,17 +8451,17 @@ _ACEOF + fi + + if test "${ac_cv_header_kstat_h+set}" = set; then +- echo "$as_me:$LINENO: checking for kstat.h" >&5 +-echo $ECHO_N "checking for kstat.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for kstat.h" >&5 ++echo $ECHO_N "checking for kstat.h... $ECHO_C" >&6; } + if test "${ac_cv_header_kstat_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_kstat_h" >&5 +-echo "${ECHO_T}$ac_cv_header_kstat_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_kstat_h" >&5 ++echo "${ECHO_T}$ac_cv_header_kstat_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking kstat.h usability" >&5 +-echo $ECHO_N "checking kstat.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking kstat.h usability" >&5 ++echo $ECHO_N "checking kstat.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -8328,41 +8472,37 @@ $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking kstat.h presence" >&5 +-echo $ECHO_N "checking kstat.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking kstat.h presence" >&5 ++echo $ECHO_N "checking kstat.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -8371,24 +8511,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -8396,9 +8534,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -8422,25 +8561,18 @@ echo "$as_me: WARNING: kstat.h: section \"Present But Cannot Be Compiled\"" + echo "$as_me: WARNING: kstat.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: kstat.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: kstat.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for kstat.h" >&5 +-echo $ECHO_N "checking for kstat.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for kstat.h" >&5 ++echo $ECHO_N "checking for kstat.h... $ECHO_C" >&6; } + if test "${ac_cv_header_kstat_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_kstat_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_kstat_h" >&5 +-echo "${ECHO_T}$ac_cv_header_kstat_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_kstat_h" >&5 ++echo "${ECHO_T}$ac_cv_header_kstat_h" >&6; } + + fi + if test $ac_cv_header_kstat_h = yes; then +@@ -8457,8 +8589,8 @@ _ACEOF + + ;; + *) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define HAVE_LOADAVG 1 + _ACEOF +@@ -8466,34 +8598,34 @@ _ACEOF + ;; + esac + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi; ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ + ;; + osf*) + LDFLAGS=-oldstyle_liblookup +- echo "$as_me:$LINENO: checking whether to compile in loadavg" >&5 +-echo $ECHO_N "checking whether to compile in loadavg... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether to compile in loadavg" >&5 ++echo $ECHO_N "checking whether to compile in loadavg... $ECHO_C" >&6; } + +-# Check whether --with-loadavg or --without-loadavg was given. ++# Check whether --with-loadavg was given. + if test "${with_loadavg+set}" = set; then +- withval="$with_loadavg" +- case "$withval" in ++ withval=$with_loadavg; case "$withval" in + no) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + yes) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define HAVE_LOADAVG 1 + _ACEOF + + ;; + *) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define HAVE_LOADAVG 1 + _ACEOF +@@ -8501,14 +8633,15 @@ _ACEOF + ;; + esac + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi; ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ + ;; + linux*|freebsd*) + +-echo "$as_me:$LINENO: checking for main in -lcrypt" >&5 +-echo $ECHO_N "checking for main in -lcrypt... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for main in -lcrypt" >&5 ++echo $ECHO_N "checking for main in -lcrypt... $ECHO_C" >&6; } + if test "${ac_cv_lib_crypt_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8525,46 +8658,43 @@ cat >>conftest.$ac_ext <<_ACEOF + int + main () + { +-main (); ++return main (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_crypt_main=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_crypt_main=no ++ ac_cv_lib_crypt_main=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_main" >&5 +-echo "${ECHO_T}$ac_cv_lib_crypt_main" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_main" >&5 ++echo "${ECHO_T}$ac_cv_lib_crypt_main" >&6; } + if test $ac_cv_lib_crypt_main = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBCRYPT 1 +@@ -8575,28 +8705,27 @@ _ACEOF + fi + + +- echo "$as_me:$LINENO: checking whether to compile in loadavg" >&5 +-echo $ECHO_N "checking whether to compile in loadavg... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether to compile in loadavg" >&5 ++echo $ECHO_N "checking whether to compile in loadavg... $ECHO_C" >&6; } + +-# Check whether --with-loadavg or --without-loadavg was given. ++# Check whether --with-loadavg was given. + if test "${with_loadavg+set}" = set; then +- withval="$with_loadavg" +- case "$withval" in ++ withval=$with_loadavg; case "$withval" in + no) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + yes) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define HAVE_LOADAVG 1 + _ACEOF + + ;; + *) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define HAVE_LOADAVG 1 + _ACEOF +@@ -8604,9 +8733,10 @@ _ACEOF + ;; + esac + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi; ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ + ;; + darwin* | "Mac OS"*) + ac_cv_prog_RANLIB="ranlib" +@@ -8616,28 +8746,27 @@ darwin* | "Mac OS"*) + _ACEOF + + CFLAGS="$CFLAGS -no-cpp-precomp" +- echo "$as_me:$LINENO: checking whether to compile in loadavg" >&5 +-echo $ECHO_N "checking whether to compile in loadavg... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether to compile in loadavg" >&5 ++echo $ECHO_N "checking whether to compile in loadavg... $ECHO_C" >&6; } + +-# Check whether --with-loadavg or --without-loadavg was given. ++# Check whether --with-loadavg was given. + if test "${with_loadavg+set}" = set; then +- withval="$with_loadavg" +- case "$withval" in ++ withval=$with_loadavg; case "$withval" in + no) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + yes) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define HAVE_LOADAVG 1 + _ACEOF + + ;; + *) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define HAVE_LOADAVG 1 + _ACEOF +@@ -8645,25 +8774,25 @@ _ACEOF + ;; + esac + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi; ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ + ;; + *bsdi*) +- echo "$as_me:$LINENO: checking whether to compile in loadavg" >&5 +-echo $ECHO_N "checking whether to compile in loadavg... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether to compile in loadavg" >&5 ++echo $ECHO_N "checking whether to compile in loadavg... $ECHO_C" >&6; } + +-# Check whether --with-loadavg or --without-loadavg was given. ++# Check whether --with-loadavg was given. + if test "${with_loadavg+set}" = set; then +- withval="$with_loadavg" +- case "$withval" in ++ withval=$with_loadavg; case "$withval" in + no) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + yes) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define bsdi 1 + _ACEOF +@@ -8674,8 +8803,8 @@ _ACEOF + + ;; + *) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define bsdi 1 + _ACEOF +@@ -8687,15 +8816,16 @@ _ACEOF + ;; + esac + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi; ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ + ;; + esac + + +-echo "$as_me:$LINENO: checking for crypt in -lc" >&5 +-echo $ECHO_N "checking for crypt in -lc... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for crypt in -lc" >&5 ++echo $ECHO_N "checking for crypt in -lc... $ECHO_C" >&6; } + if test "${ac_cv_lib_c_crypt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8708,62 +8838,59 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char crypt (); + int + main () + { +-crypt (); ++return crypt (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_c_crypt=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_c_crypt=no ++ ac_cv_lib_c_crypt=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_c_crypt" >&5 +-echo "${ECHO_T}$ac_cv_lib_c_crypt" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_c_crypt" >&5 ++echo "${ECHO_T}$ac_cv_lib_c_crypt" >&6; } + if test $ac_cv_lib_c_crypt = yes; then + : + else + +- echo "$as_me:$LINENO: checking for crypt in -lcrypt" >&5 +-echo $ECHO_N "checking for crypt in -lcrypt... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for crypt in -lcrypt" >&5 ++echo $ECHO_N "checking for crypt in -lcrypt... $ECHO_C" >&6; } + if test "${ac_cv_lib_crypt_crypt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8776,56 +8903,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char crypt (); + int + main () + { +-crypt (); ++return crypt (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_crypt_crypt=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_crypt_crypt=no ++ ac_cv_lib_crypt_crypt=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_crypt" >&5 +-echo "${ECHO_T}$ac_cv_lib_crypt_crypt" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_crypt" >&5 ++echo "${ECHO_T}$ac_cv_lib_crypt_crypt" >&6; } + if test $ac_cv_lib_crypt_crypt = yes; then + + LIBS="-lcrypt $LIBS" +@@ -8838,8 +8962,8 @@ fi + fi + + +-echo "$as_me:$LINENO: checking for log10 in -lm" >&5 +-echo $ECHO_N "checking for log10 in -lm... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for log10 in -lm" >&5 ++echo $ECHO_N "checking for log10 in -lm... $ECHO_C" >&6; } + if test "${ac_cv_lib_m_log10+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8852,90 +8976,86 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char log10 (); + int + main () + { +-log10 (); ++return log10 (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_m_log10=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_m_log10=no ++ ac_cv_lib_m_log10=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_m_log10" >&5 +-echo "${ECHO_T}$ac_cv_lib_m_log10" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_m_log10" >&5 ++echo "${ECHO_T}$ac_cv_lib_m_log10" >&6; } + if test $ac_cv_lib_m_log10 = yes; then + LIBS="-lm $LIBS" + fi + + +-echo "$as_me:$LINENO: checking whether to default to ipv6" >&5 +-echo $ECHO_N "checking whether to default to ipv6... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to default to ipv6" >&5 ++echo $ECHO_N "checking whether to default to ipv6... $ECHO_C" >&6; } + +-# Check whether --with-inet6 or --without-inet6 was given. ++# Check whether --with-inet6 was given. + if test "${with_inet6+set}" = set; then +- withval="$with_inet6" +- echo "$as_me:$LINENO: result: ignored" >&5 +-echo "${ECHO_T}ignored" >&6 ++ withval=$with_inet6; { echo "$as_me:$LINENO: result: ignored" >&5 ++echo "${ECHO_T}ignored" >&6; } + else +- echo "$as_me:$LINENO: result: ignored" >&5 +-echo "${ECHO_T}ignored" >&6 +-fi; ++ { echo "$as_me:$LINENO: result: ignored" >&5 ++echo "${ECHO_T}ignored" >&6; } ++fi ++ + +-echo "$as_me:$LINENO: checking whether to use libwrap" >&5 +-echo $ECHO_N "checking whether to use libwrap... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to use libwrap" >&5 ++echo $ECHO_N "checking whether to use libwrap... $ECHO_C" >&6; } + +-# Check whether --with-libwrap or --without-libwrap was given. ++# Check whether --with-libwrap was given. + if test "${with_libwrap+set}" = set; then +- withval="$with_libwrap" +- case "$withval" in ++ withval=$with_libwrap; case "$withval" in + no) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + yes) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +- echo "$as_me:$LINENO: checking for request_init in -lwrap" >&5 +-echo $ECHO_N "checking for request_init in -lwrap... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ { echo "$as_me:$LINENO: checking for request_init in -lwrap" >&5 ++echo $ECHO_N "checking for request_init in -lwrap... $ECHO_C" >&6; } + if test "${ac_cv_lib_wrap_request_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8948,56 +9068,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char request_init (); + int + main () + { +-request_init (); ++return request_init (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_wrap_request_init=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_wrap_request_init=no ++ ac_cv_lib_wrap_request_init=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_wrap_request_init" >&5 +-echo "${ECHO_T}$ac_cv_lib_wrap_request_init" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_wrap_request_init" >&5 ++echo "${ECHO_T}$ac_cv_lib_wrap_request_init" >&6; } + if test $ac_cv_lib_wrap_request_init = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -9011,8 +9128,8 @@ _ACEOF + + fi + +- echo "$as_me:$LINENO: checking for yp_get_default_domain in -lnsl" >&5 +-echo $ECHO_N "checking for yp_get_default_domain in -lnsl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for yp_get_default_domain in -lnsl" >&5 ++echo $ECHO_N "checking for yp_get_default_domain in -lnsl... $ECHO_C" >&6; } + if test "${ac_cv_lib_nsl_yp_get_default_domain+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9025,56 +9142,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char yp_get_default_domain (); + int + main () + { +-yp_get_default_domain (); ++return yp_get_default_domain (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_nsl_yp_get_default_domain=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_nsl_yp_get_default_domain=no ++ ac_cv_lib_nsl_yp_get_default_domain=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_yp_get_default_domain" >&5 +-echo "${ECHO_T}$ac_cv_lib_nsl_yp_get_default_domain" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_yp_get_default_domain" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_yp_get_default_domain" >&6; } + if test $ac_cv_lib_nsl_yp_get_default_domain = yes; then + + WRAPLIBS="$WRAPLIBS -lnsl" +@@ -9083,8 +9197,8 @@ fi + LIBS="$WRAPLIBS $LIBS" + ;; + *) +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define LIBWRAP 1 + _ACEOF +@@ -9094,8 +9208,8 @@ _ACEOF + else + WRAPLIBS="$withval" + fi +- echo "$as_me:$LINENO: checking for yp_get_default_domain in -lnsl" >&5 +-echo $ECHO_N "checking for yp_get_default_domain in -lnsl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for yp_get_default_domain in -lnsl" >&5 ++echo $ECHO_N "checking for yp_get_default_domain in -lnsl... $ECHO_C" >&6; } + if test "${ac_cv_lib_nsl_yp_get_default_domain+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9108,56 +9222,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char yp_get_default_domain (); + int + main () + { +-yp_get_default_domain (); ++return yp_get_default_domain (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_nsl_yp_get_default_domain=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_nsl_yp_get_default_domain=no ++ ac_cv_lib_nsl_yp_get_default_domain=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_yp_get_default_domain" >&5 +-echo "${ECHO_T}$ac_cv_lib_nsl_yp_get_default_domain" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_yp_get_default_domain" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_yp_get_default_domain" >&6; } + if test $ac_cv_lib_nsl_yp_get_default_domain = yes; then + + WRAPLIBS="$WRAPLIBS -lnsl" +@@ -9181,63 +9292,62 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + : + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- { { echo "$as_me:$LINENO: error: Could not find the $withval library. You must first install tcp_wrappers." >&5 ++ { { echo "$as_me:$LINENO: error: Could not find the $withval library. You must first install tcp_wrappers." >&5 + echo "$as_me: error: Could not find the $withval library. You must first install tcp_wrappers." >&2;} + { (exit 1); exit 1; }; } + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + ;; + esac + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ ++fi + +-fi; + + + + for ac_header in stdlib.h unistd.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -9248,41 +9358,37 @@ $ac_includes_default + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -9291,24 +9397,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -9316,9 +9420,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -9342,25 +9447,19 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -9376,9 +9475,9 @@ done + for ac_func in getpagesize + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -9404,68 +9503,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -9474,8 +9565,8 @@ _ACEOF + fi + done + +-echo "$as_me:$LINENO: checking for working mmap" >&5 +-echo $ECHO_N "checking for working mmap... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for working mmap" >&5 ++echo $ECHO_N "checking for working mmap... $ECHO_C" >&6; } + if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9517,21 +9608,21 @@ $ac_includes_default + #include + #include + +-#if !STDC_HEADERS && !HAVE_STDLIB_H ++#if !defined STDC_HEADERS && !defined HAVE_STDLIB_H + char *malloc (); + #endif + + /* This mess was copied from the GNU getpagesize.h. */ +-#if !HAVE_GETPAGESIZE ++#ifndef HAVE_GETPAGESIZE + /* Assume that all systems that can run configure have sys/param.h. */ +-# if !HAVE_SYS_PARAM_H ++# ifndef HAVE_SYS_PARAM_H + # define HAVE_SYS_PARAM_H 1 + # endif + + # ifdef _SC_PAGESIZE + # define getpagesize() sysconf(_SC_PAGESIZE) + # else /* no _SC_PAGESIZE */ +-# if HAVE_SYS_PARAM_H ++# ifdef HAVE_SYS_PARAM_H + # include + # ifdef EXEC_PAGESIZE + # define getpagesize() EXEC_PAGESIZE +@@ -9570,15 +9661,15 @@ main () + /* First, make a file with some known garbage in it. */ + data = (char *) malloc (pagesize); + if (!data) +- exit (1); ++ return 1; + for (i = 0; i < pagesize; ++i) + *(data + i) = rand (); + umask (0); + fd = creat ("conftest.mmap", 0600); + if (fd < 0) +- exit (1); ++ return 1; + if (write (fd, data, pagesize) != pagesize) +- exit (1); ++ return 1; + close (fd); + + /* Next, try to mmap the file at a fixed address which already has +@@ -9586,17 +9677,17 @@ main () + we see the same garbage. */ + fd = open ("conftest.mmap", O_RDWR); + if (fd < 0) +- exit (1); ++ return 1; + data2 = (char *) malloc (2 * pagesize); + if (!data2) +- exit (1); +- data2 += (pagesize - ((long) data2 & (pagesize - 1))) & (pagesize - 1); ++ return 1; ++ data2 += (pagesize - ((long int) data2 & (pagesize - 1))) & (pagesize - 1); + if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_FIXED, fd, 0L)) +- exit (1); ++ return 1; + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data2 + i)) +- exit (1); ++ return 1; + + /* Finally, make sure that changes to the mapped area do not + percolate back to the file as seen by read(). (This is a bug on +@@ -9605,24 +9696,33 @@ main () + *(data2 + i) = *(data2 + i) + 1; + data3 = (char *) malloc (pagesize); + if (!data3) +- exit (1); ++ return 1; + if (read (fd, data3, pagesize) != pagesize) +- exit (1); ++ return 1; + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data3 + i)) +- exit (1); ++ return 1; + close (fd); +- exit (0); ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9635,11 +9735,13 @@ sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) + ac_cv_func_mmap_fixed_mapped=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5 +-echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5 ++echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6; } + if test $ac_cv_func_mmap_fixed_mapped = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -9654,9 +9756,9 @@ rm -f conftest.mmap + for ac_func in isatty + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -9682,68 +9784,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -9756,9 +9850,9 @@ done + for ac_func in memcpy + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -9784,68 +9878,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -9858,9 +9944,9 @@ done + for ac_func in waitpid + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -9886,68 +9972,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -9960,9 +10038,9 @@ done + for ac_func in sigvec + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -9988,68 +10066,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -10062,9 +10132,9 @@ done + for ac_func in setsid + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -10090,68 +10160,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -10164,9 +10226,9 @@ done + for ac_func in strftime + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -10192,68 +10254,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -10275,9 +10329,10 @@ mkdir -p libs/include + mkdir -p libs/lib + mkdir -p libs/man + +- ac_config_headers="$ac_config_headers config.h" ++ac_config_headers="$ac_config_headers config.h" ++ ++ac_config_files="$ac_config_files Makefile libs/src/misc/Makefile libs/src/pset/Makefile libs/src/sio/Makefile libs/src/str/Makefile libs/src/xlog/Makefile libs/src/portable/Makefile xinetd/Makefile" + +- ac_config_files="$ac_config_files Makefile libs/src/misc/Makefile libs/src/pset/Makefile libs/src/sio/Makefile libs/src/str/Makefile libs/src/xlog/Makefile libs/src/portable/Makefile xinetd/Makefile" + cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure + # tests run on this system so they can be shared between configure +@@ -10296,39 +10351,58 @@ _ACEOF + + # The following way of writing the cache mishandles newlines in values, + # but we know of no workaround that is simple, portable, and efficient. +-# So, don't put newlines in cache variables' values. ++# So, we kill variables containing newlines. + # Ultrix sh set writes to stderr and can't be redirected directly, + # and sets the high bit in the cache file unless we assign to the vars. +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ + (set) 2>&1 | +- case `(ac_space=' '; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +- ;; ++ ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} | ++ esac | ++ sort ++) | + sed ' ++ /^ac_cv_env_/b end + t clear +- : clear ++ :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end +- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ +- : end' >>confcache +-if diff $cache_file confcache >/dev/null 2>&1; then :; else +- if test -w $cache_file; then +- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else +- echo "not updating unwritable cache $cache_file" ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi + rm -f confcache +@@ -10337,32 +10411,18 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix + # Let make expand exec_prefix. + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +-# trailing colons and then remove the whole line if VPATH becomes empty +-# (actually we leave an empty line to preserve line numbers). +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/; +-s/:*\${srcdir}:*/:/; +-s/:*@srcdir@:*/:/; +-s/^\([^=]*=[ ]*\):*/\1/; +-s/:*$//; +-s/^[^=]*=[ ]*$//; +-}' +-fi +- + DEFS=-DHAVE_CONFIG_H + + ac_libobjs= + ac_ltlibobjs= + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. +- ac_i=`echo "$ac_i" | +- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` +- # 2. Add them. +- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + done + LIBOBJS=$ac_libobjs + +@@ -10393,17 +10453,45 @@ cat >>$CONFIG_STATUS <<\_ACEOF + ## M4sh Initialization. ## + ## --------------------- ## + +-# Be Bourne compatible ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi +-DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +@@ -10413,8 +10501,43 @@ else + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -10428,18 +10551,19 @@ do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -10447,159 +10571,120 @@ fi + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits +- +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh +-fi ++# CDPATH. ++$as_unset CDPATH + + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in +- /*) +- if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || +- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -10608,7 +10693,28 @@ else + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -10617,31 +10723,14 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- + exec 6>&1 + +-# Open the log real soon, to keep \$[0] and so on meaningful, and to ++# Save the log message, to keep $[0] and so on meaningful, and to + # report actual input values of CONFIG_FILES etc. instead of their +-# values after options handling. Logging --version etc. is OK. +-exec 5>>config.log +-{ +- echo +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +-## Running $as_me. ## +-_ASBOX +-} >&5 +-cat >&5 <<_CSEOF +- ++# values after options handling. ++ac_log=" + This file was extended by $as_me, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -10649,30 +10738,19 @@ generated by GNU Autoconf 2.59. Invocation command line was + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +-_CSEOF +-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +-echo >&5 ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ + _ACEOF + ++cat >>$CONFIG_STATUS <<_ACEOF + # Files that config.status was made for. +-if test -n "$ac_config_files"; then +- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_headers"; then +- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_links"; then +- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +-fi ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" + +-if test -n "$ac_config_commands"; then +- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +-fi ++_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +- + ac_cs_usage="\ + \`$as_me' instantiates files from templates according to the + current configuration. +@@ -10680,7 +10758,7 @@ current configuration. + Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit +- -V, --version print version number, then exit ++ -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions +@@ -10696,19 +10774,21 @@ Configuration headers: + $config_headers + + Report bugs to ." +-_ACEOF + ++_ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + ac_cs_version="\\ + config.status +-configured by $0, generated by GNU Autoconf 2.59, +- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 2006 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." +-srcdir=$srcdir +-INSTALL="$INSTALL" ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +@@ -10719,39 +10799,24 @@ while test $# != 0 + do + case $1 in + --*=*) +- ac_option=`expr "x$1" : 'x\([^=]*\)='` +- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; +- -*) ++ *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; +- *) # This is not an option, so the user has probably given explicit +- # arguments. +- ac_option=$1 +- ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; +- --version | --vers* | -V ) +- echo "$ac_cs_version"; exit 0 ;; +- --he | --h) +- # Conflict between --help and --header +- { { echo "$as_me:$LINENO: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2;} +- { (exit 1); exit 1; }; };; +- --help | --hel | -h ) +- echo "$ac_cs_usage"; exit 0 ;; +- --debug | --d* | -d ) ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift +@@ -10761,18 +10826,24 @@ Try \`$0 --help' for more information." >&2;} + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. +- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2;} ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + +- *) ac_config_targets="$ac_config_targets $1" ;; ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; + + esac + shift +@@ -10788,36 +10859,50 @@ fi + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + if \$ac_cs_recheck; then +- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 +- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + fi + + _ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ echo "$ac_log" ++} >&5 + +- +- +- ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# Handling of arguments. + for ac_config_target in $ac_config_targets + do +- case "$ac_config_target" in +- # Handling of arguments. +- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; +- "libs/src/misc/Makefile" ) CONFIG_FILES="$CONFIG_FILES libs/src/misc/Makefile" ;; +- "libs/src/pset/Makefile" ) CONFIG_FILES="$CONFIG_FILES libs/src/pset/Makefile" ;; +- "libs/src/sio/Makefile" ) CONFIG_FILES="$CONFIG_FILES libs/src/sio/Makefile" ;; +- "libs/src/str/Makefile" ) CONFIG_FILES="$CONFIG_FILES libs/src/str/Makefile" ;; +- "libs/src/xlog/Makefile" ) CONFIG_FILES="$CONFIG_FILES libs/src/xlog/Makefile" ;; +- "libs/src/portable/Makefile" ) CONFIG_FILES="$CONFIG_FILES libs/src/portable/Makefile" ;; +- "xinetd/Makefile" ) CONFIG_FILES="$CONFIG_FILES xinetd/Makefile" ;; +- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "libs/src/misc/Makefile") CONFIG_FILES="$CONFIG_FILES libs/src/misc/Makefile" ;; ++ "libs/src/pset/Makefile") CONFIG_FILES="$CONFIG_FILES libs/src/pset/Makefile" ;; ++ "libs/src/sio/Makefile") CONFIG_FILES="$CONFIG_FILES libs/src/sio/Makefile" ;; ++ "libs/src/str/Makefile") CONFIG_FILES="$CONFIG_FILES libs/src/str/Makefile" ;; ++ "libs/src/xlog/Makefile") CONFIG_FILES="$CONFIG_FILES libs/src/xlog/Makefile" ;; ++ "libs/src/portable/Makefile") CONFIG_FILES="$CONFIG_FILES libs/src/portable/Makefile" ;; ++ "xinetd/Makefile") CONFIG_FILES="$CONFIG_FILES xinetd/Makefile" ;; ++ + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 + echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac + done + ++ + # If the user did not use the arguments to specify the items to instantiate, + # then the envvar interface is used. Set only those that are not. + # We use the long form for the default assignment because of an extremely +@@ -10828,565 +10913,517 @@ if $ac_need_defaults; then + fi + + # Have a temporary directory for convenience. Make it in the build tree +-# simply because there is no reason to put it here, and in addition, ++# simply because there is no reason against having it here, and in addition, + # creating and moving files from /tmp can sometimes cause problems. +-# Create a temporary directory, and hook for its removal unless debugging. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. + $debug || + { +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 + } +- + # Create a (secure) tmp directory for tmp files. + + { +- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" + } || + { +- tmp=./confstat$$-$RANDOM +- (umask 077 && mkdir $tmp) ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") + } || + { + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } + } + +-_ACEOF +- +-cat >>$CONFIG_STATUS <<_ACEOF +- + # +-# CONFIG_FILES section. ++# Set up the sed scripts for CONFIG_FILES section. + # + + # No need to generate the scripts if there are no CONFIG_FILES. + # This happens for instance when ./config.status config.h +-if test -n "\$CONFIG_FILES"; then +- # Protect against being on the right side of a sed subst in config.status. +- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; +- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +-s,@SHELL@,$SHELL,;t t +-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +-s,@exec_prefix@,$exec_prefix,;t t +-s,@prefix@,$prefix,;t t +-s,@program_transform_name@,$program_transform_name,;t t +-s,@bindir@,$bindir,;t t +-s,@sbindir@,$sbindir,;t t +-s,@libexecdir@,$libexecdir,;t t +-s,@datadir@,$datadir,;t t +-s,@sysconfdir@,$sysconfdir,;t t +-s,@sharedstatedir@,$sharedstatedir,;t t +-s,@localstatedir@,$localstatedir,;t t +-s,@libdir@,$libdir,;t t +-s,@includedir@,$includedir,;t t +-s,@oldincludedir@,$oldincludedir,;t t +-s,@infodir@,$infodir,;t t +-s,@mandir@,$mandir,;t t +-s,@build_alias@,$build_alias,;t t +-s,@host_alias@,$host_alias,;t t +-s,@target_alias@,$target_alias,;t t +-s,@DEFS@,$DEFS,;t t +-s,@ECHO_C@,$ECHO_C,;t t +-s,@ECHO_N@,$ECHO_N,;t t +-s,@ECHO_T@,$ECHO_T,;t t +-s,@LIBS@,$LIBS,;t t +-s,@build@,$build,;t t +-s,@build_cpu@,$build_cpu,;t t +-s,@build_vendor@,$build_vendor,;t t +-s,@build_os@,$build_os,;t t +-s,@host@,$host,;t t +-s,@host_cpu@,$host_cpu,;t t +-s,@host_vendor@,$host_vendor,;t t +-s,@host_os@,$host_os,;t t +-s,@target@,$target,;t t +-s,@target_cpu@,$target_cpu,;t t +-s,@target_vendor@,$target_vendor,;t t +-s,@target_os@,$target_os,;t t +-s,@CC@,$CC,;t t +-s,@CFLAGS@,$CFLAGS,;t t +-s,@LDFLAGS@,$LDFLAGS,;t t +-s,@CPPFLAGS@,$CPPFLAGS,;t t +-s,@ac_ct_CC@,$ac_ct_CC,;t t +-s,@EXEEXT@,$EXEEXT,;t t +-s,@OBJEXT@,$OBJEXT,;t t +-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +-s,@INSTALL_DATA@,$INSTALL_DATA,;t t +-s,@RANLIB@,$RANLIB,;t t +-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +-s,@CPP@,$CPP,;t t +-s,@EGREP@,$EGREP,;t t +-s,@LIBOBJS@,$LIBOBJS,;t t +-s,@LTLIBOBJS@,$LTLIBOBJS,;t t +-CEOF +- +-_ACEOF +- +- cat >>$CONFIG_STATUS <<\_ACEOF +- # Split the substitutions into bite-sized pieces for seds with +- # small command number limits, like on Digital OSF/1 and HP-UX. +- ac_max_sed_lines=48 +- ac_sed_frag=1 # Number of current file. +- ac_beg=1 # First line for current file. +- ac_end=$ac_max_sed_lines # Line after last line for current file. +- ac_more_lines=: +- ac_sed_cmds= +- while $ac_more_lines; do +- if test $ac_beg -gt 1; then +- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- else +- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- fi +- if test ! -s $tmp/subs.frag; then +- ac_more_lines=false +- else +- # The purpose of the label and of the branching condition is to +- # speed up the sed processing (if there are no `@' at all, there +- # is no need to browse any of the substitutions). +- # These are the two extra sed commands mentioned above. +- (echo ':t +- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" +- else +- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" +- fi +- ac_sed_frag=`expr $ac_sed_frag + 1` +- ac_beg=$ac_end +- ac_end=`expr $ac_end + $ac_max_sed_lines` +- fi +- done +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds=cat ++if test -n "$CONFIG_FILES"; then ++ ++_ACEOF ++ ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++target!$target$ac_delim ++target_cpu!$target_cpu$ac_delim ++target_vendor!$target_vendor$ac_delim ++target_os!$target_os$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++RANLIB!$RANLIB$ac_delim ++CPP!$CPP$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++LIBOBJS!$LIBOBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 65; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +-fi # test -n "$CONFIG_FILES" ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi + ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof + _ACEOF ++ ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ + cat >>$CONFIG_STATUS <<\_ACEOF +-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++fi # test -n "$CONFIG_FILES" ++ ++ ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; + esac + +- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. +- ac_dir=`(dirname "$ac_file") 2>/dev/null || ++ ac_dir=`$as_dirname -- "$ac_file" || + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || + echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || + echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac + ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; +- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac ++_ACEOF + +- if test x"$ac_file" != x-; then +- { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- rm -f "$ac_file" +- fi +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- configure_input= +- else +- configure_input="$ac_file. " +- fi +- configure_input=$configure_input"Generated from `echo $ac_file_in | +- sed 's,.*/,,'` by configure." +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub + $extrasub + _ACEOF + cat >>$CONFIG_STATUS <<\_ACEOF + :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s,@configure_input@,$configure_input,;t t +-s,@srcdir@,$ac_srcdir,;t t +-s,@abs_srcdir@,$ac_abs_srcdir,;t t +-s,@top_srcdir@,$ac_top_srcdir,;t t +-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +-s,@builddir@,$ac_builddir,;t t +-s,@abs_builddir@,$ac_abs_builddir,;t t +-s,@top_builddir@,$ac_top_builddir,;t t +-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +-s,@INSTALL@,$ac_INSTALL,;t t +-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out +- rm -f $tmp/stdin +- if test x"$ac_file" != x-; then +- mv $tmp/out $ac_file +- else +- cat $tmp/out +- rm -f $tmp/out +- fi +- +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- +-# +-# CONFIG_HEADER section. +-# +- +-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +-# NAME is the cpp macro being defined and VALUE is the value it is being given. +-# +-# ac_d sets the value in "#define NAME VALUE" lines. +-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +-ac_dB='[ ].*$,\1#\2' +-ac_dC=' ' +-ac_dD=',;t' +-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +-ac_uB='$,\1#\2define\3' +-ac_uC=' ' +-ac_uD=',;t' +- +-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} ++ ++ rm -f "$tmp/stdin" + case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac +- +- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- # Do quote $f, to prevent DOS paths from being IFS'd. +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +- # Remove the trailing spaces. +- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in +- +-_ACEOF +- +-# Transform confdefs.h into two sed scripts, `conftest.defines' and +-# `conftest.undefs', that substitutes the proper values into +-# config.h.in to produce config.h. The first handles `#define' +-# templates, and the second `#undef' templates. +-# And first: Protect against being on the right side of a sed subst in +-# config.status. Protect against being in an unquoted here document +-# in config.status. +-rm -f conftest.defines conftest.undefs +-# Using a here document instead of a string reduces the quoting nightmare. +-# Putting comments in sed scripts is not portable. +-# +-# `end' is used to avoid that the second main sed command (meant for +-# 0-ary CPP macros) applies to n-ary macro definitions. +-# See the Autoconf documentation for `clear'. +-cat >confdef2sed.sed <<\_ACEOF +-s/[\\&,]/\\&/g +-s,[\\$`],\\&,g +-t clear +-: clear +-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +-t end +-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +-: end +-_ACEOF +-# If some macros were called several times there might be several times +-# the same #defines, which is useless. Nevertheless, we may not want to +-# sort them, since we want the *last* AC-DEFINE to be honored. +-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +-rm -f confdef2sed.sed +- +-# This sed command replaces #undef with comments. This is necessary, for ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # ++_ACEOF ++ ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' ++ ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines ++ ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for + # example, in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. +-cat >>conftest.undefs <<\_ACEOF +-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +-_ACEOF +- +-# Break up conftest.defines because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +-echo ' :' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.defines >/dev/null ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' ++ ++while : + do +- # Write a limited-size here document to $tmp/defines.sed. +- echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#define' lines. +- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def ++_ACEOF ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF +- sed -f $tmp/defines.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break + rm -f conftest.defines + mv conftest.tail conftest.defines + done +-rm -f conftest.defines +-echo ' fi # grep' >>$CONFIG_STATUS +-echo >>$CONFIG_STATUS +- +-# Break up conftest.undefs because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.undefs >/dev/null +-do +- # Write a limited-size here document to $tmp/undefs.sed. +- echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#undef' +- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS +- echo 'CEOF +- sed -f $tmp/undefs.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail +- rm -f conftest.undefs +- mv conftest.tail conftest.undefs +-done +-rm -f conftest.undefs ++rm -f conftest.defines conftest.tail + ++echo "ac_result=$ac_in" >>$CONFIG_STATUS + cat >>$CONFIG_STATUS <<\_ACEOF +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- echo "/* Generated by configure. */" >$tmp/config.h +- else +- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h +- fi +- cat $tmp/in >>$tmp/config.h +- rm -f $tmp/in + if test x"$ac_file" != x-; then +- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 + echo "$as_me: $ac_file is unchanged" >&6;} + else +- ac_dir=`(dirname "$ac_file") 2>/dev/null || +-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X\(//\)[^/]' \| \ +- X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- + rm -f $ac_file +- mv $tmp/config.h $ac_file ++ mv "$tmp/config.h" $ac_file + fi + else +- cat $tmp/config.h +- rm -f $tmp/config.h ++ echo "/* $configure_input */" ++ cat "$ac_result" + fi +-done +-_ACEOF ++ rm -f "$tmp/out12" ++ ;; ++ ++ ++ esac ++ ++done # for ac_tag + +-cat >>$CONFIG_STATUS <<\_ACEOF + + { (exit 0); exit 0; } + _ACEOF +-- +1.5.3.6.2040.g15e6 + --- xinetd-2.3.14.orig/debian/patches/0002-xconv.pl-updates.patch +++ xinetd-2.3.14/debian/patches/0002-xconv.pl-updates.patch @@ -0,0 +1,88 @@ +From 230b222e62166df16f21aff3859dafab3cd3cae7 Mon Sep 17 00:00:00 2001 +From: Pierre Habouzit +Date: Mon, 26 Nov 2007 16:01:43 +0100 +Subject: [PATCH] xconv.pl updates + +--- + xinetd/xconv.pl | 37 ++++++++++++++++++++++++++++++++++++- + 1 files changed, 36 insertions(+), 1 deletions(-) + +diff --git a/xinetd/xconv.pl b/xinetd/xconv.pl +index cc58868..6c0a71d 100755 +--- a/xinetd/xconv.pl ++++ b/xinetd/xconv.pl +@@ -16,8 +16,16 @@ print_defaults; + + while( ) { + ++ $disable = 0; # Default to 'enable' ++ + chomp; + ++ # Check for disable before we check for comments ++ if (m/^\#\#/i) { ++ s/^.*?\s//; ++ $disable = 1; ++ } ++ + # Remove comment lines + if( grep /^#/, $_ ) { + next; +@@ -37,9 +45,12 @@ while( ) { + + print "service $command[0]\n"; + print "{\n"; +- print "\tflags = NAMEINARGS\n"; + print "\tsocket_type = $command[1]\n"; + print "\tprotocol = $command[2]\n"; ++ if( $command[0] =~ /^\d+$/ ) { ++ print "\tport = $command[0]\n"; ++ print "\ttype = UNLISTED\n"; ++ } + if( grep /no/, $command[3] ) { + print "\twait = no\n"; + } else { +@@ -50,9 +61,28 @@ while( ) { + if( defined $user[1] ) { + print "\tgroup = $user[1]\n"; + } ++ # Amanda is a special case, it needs this, see ++ # http://www.amanda.org/docs/install.html and ++ # Bug report #167367 ++ if ( $command[6] =~ /(amandad|amindexd|amidxtaped)/ ) { ++ print "\tgroups = yes\n"; ++ } + if( grep /internal/, $command[5] ) { + print "\ttype = INTERNAL\n"; + print "\tid = $command[0]-$command[1]\n"; ++ } elsif ( $command[5] =~ /\/usr\/sbin\/tcpd/ ){ ++ # Tcp wrapping is already implemented in xinetd ++ print "\tserver = $command[6]\n"; ++ if ( defined $command[7] ) { ++ print "\tserver_args = "; ++ $i = 7; ++ while( defined $command[$i] ) { ++ print "$command[$i] "; ++ $i++; ++ } ++ print "\n"; ++ } ++ + } else { + print "\tserver = $command[5]\n"; + print "\tserver_args = "; +@@ -65,6 +95,11 @@ while( ) { + + print "\n"; + } ++ ++ if ($disable) { ++ print "\tdisable = yes\n"; ++ } ++ + print "}\n"; + print "\n"; + } +-- +1.5.3.6.2040.g15e6 + --- xinetd-2.3.14.orig/debian/patches/0006-Disable-services-from-inetd.conf-if-a-service-with-t.patch +++ xinetd-2.3.14/debian/patches/0006-Disable-services-from-inetd.conf-if-a-service-with-t.patch @@ -0,0 +1,84 @@ +From d588b6530e1382a624898b3f4307f636c72c80a9 Mon Sep 17 00:00:00 2001 +From: Pierre Habouzit +Date: Wed, 28 Nov 2007 10:13:08 +0100 +Subject: [PATCH] Disable services from inetd.conf if a service with the same id exists. + + This way, if a service is enabled in /etc/xinetd* _and_ in +/etc/inetd.conf, the one (even if disabled) from /etc/xinetd* takes +precedence. + +Signed-off-by: Pierre Habouzit +--- + xinetd/inet.c | 22 +++++++++++++++++++--- + 1 files changed, 19 insertions(+), 3 deletions(-) + +diff --git a/xinetd/inet.c b/xinetd/inet.c +index 1cb2ba2..8caab45 100644 +--- a/xinetd/inet.c ++++ b/xinetd/inet.c +@@ -23,6 +23,8 @@ + #include "parsesup.h" + #include "nvlists.h" + ++static psi_h iter ; ++ + static int get_next_inet_entry( int fd, pset_h sconfs, + struct service_config *defaults); + +@@ -32,12 +34,15 @@ void parse_inet_conf_file( int fd, struct configuration *confp ) + struct service_config *default_config = CNF_DEFAULTS( confp ); + + line_count = 0; ++ iter = psi_create (sconfs); + + for( ;; ) + { + if (get_next_inet_entry(fd, sconfs, default_config) == -2) + break; + } ++ ++ psi_destroy(iter); + } + + static int get_next_inet_entry( int fd, pset_h sconfs, +@@ -46,7 +51,7 @@ static int get_next_inet_entry( int fd, pset_h sconfs, + char *p; + str_h strp; + char *line = next_line(fd); +- struct service_config *scp; ++ struct service_config *scp, *tmp; + unsigned u, i; + const char *func = "get_next_inet_entry"; + char *name = NULL, *rpcvers = NULL, *rpcproto = NULL; +@@ -405,7 +410,16 @@ static int get_next_inet_entry( int fd, pset_h sconfs, + SC_SPECIFY( scp, A_SOCKET_TYPE ); + SC_SPECIFY( scp, A_WAIT ); + +- if( ! pset_add(sconfs, scp) ) ++ for ( tmp = SCP( psi_start( iter ) ) ; tmp ; tmp = SCP( psi_next(iter)) ){ ++ if (EQ(SC_ID(scp), SC_ID(tmp))) { ++ parsemsg(LOG_DEBUG, func, "removing duplicate service %s", SC_NAME(scp)); ++ sc_free(scp); ++ scp = NULL; ++ break; ++ } ++ } ++ ++ if( scp && ! pset_add(sconfs, scp) ) + { + out_of_memory( func ); + pset_destroy(args); +@@ -414,7 +428,9 @@ static int get_next_inet_entry( int fd, pset_h sconfs, + } + + pset_destroy(args); +- parsemsg( LOG_DEBUG, func, "added service %s", SC_NAME(scp)); ++ if (scp) { ++ parsemsg( LOG_DEBUG, func, "added service %s", SC_NAME(scp)); ++ } + return 0; + } + +-- +1.5.3.6.2040.g15e6 + --- xinetd-2.3.14.orig/debian/patches/0007-xinetd-should-be-able-to-listen-on-IPv6-even-in-ine.patch +++ xinetd-2.3.14/debian/patches/0007-xinetd-should-be-able-to-listen-on-IPv6-even-in-ine.patch @@ -0,0 +1,110 @@ +From f44b218ccc779ab3f4aed072390ccf129d94b58d Mon Sep 17 00:00:00 2001 +From: David Madore +Date: Mon, 24 Mar 2008 12:45:36 +0100 +Subject: [PATCH] xinetd should be able to listen on IPv6 even in -inetd_compat mode + +xinetd does not bind to IPv6 addresses (and does not seem to have an +option to do so) when used in -inetd_compat mode. As current inetd's +are IPv6-aware, this is a problem: this means xinetd cannot be used as +a drop-in inetd replacement. + +The attached patch is a suggestion: it adds a -inetd_ipv6 global +option that, if used, causes inetd-compatibility lines to have an +implicit "IPv6" option. Perhaps this is not the best solution, but +there should definitely be a way to get inetd.conf to be read in +IPv6-aware mode. +--- + xinetd/confparse.c | 1 + + xinetd/inet.c | 17 +++++++++++++++++ + xinetd/options.c | 3 +++ + xinetd/xinetd.man | 6 ++++++ + 4 files changed, 27 insertions(+), 0 deletions(-) + +diff --git a/xinetd/confparse.c b/xinetd/confparse.c +index db9f431..d7b0bcc 100644 +--- a/xinetd/confparse.c ++++ b/xinetd/confparse.c +@@ -40,6 +40,7 @@ + #include "inet.h" + #include "main.h" + ++extern int inetd_ipv6; + extern int inetd_compat; + + /* +diff --git a/xinetd/inet.c b/xinetd/inet.c +index 8caab45..2e617ae 100644 +--- a/xinetd/inet.c ++++ b/xinetd/inet.c +@@ -25,6 +25,8 @@ + + static psi_h iter ; + ++extern int inetd_ipv6; ++ + static int get_next_inet_entry( int fd, pset_h sconfs, + struct service_config *defaults); + +@@ -360,6 +362,21 @@ static int get_next_inet_entry( int fd, pset_h sconfs, + } + SC_SERVER_ARGV(scp)[u] = p; + } ++ ++ /* Set the IPv6 flag if we were passed the -inetd_ipv6 option */ ++ if ( inetd_ipv6 ) ++ { ++ nvp = nv_find_value( service_flags, "IPv6" ); ++ if ( nvp == NULL ) ++ { ++ parsemsg( LOG_WARNING, func, "inetd.conf - Bad foo %s", name ) ; ++ pset_destroy(args); ++ sc_free(scp); ++ return -1; ++ } ++ M_SET(SC_XFLAGS(scp), nvp->value); ++ } ++ + /* Set the reuse flag, as this is the default for inetd */ + nvp = nv_find_value( service_flags, "REUSE" ); + if ( nvp == NULL ) +diff --git a/xinetd/options.c b/xinetd/options.c +index b058b6a..dc2f3a0 100644 +--- a/xinetd/options.c ++++ b/xinetd/options.c +@@ -30,6 +30,7 @@ int logprocs_option ; + unsigned logprocs_option_arg ; + int stayalive_option=0; + char *program_name ; ++int inetd_ipv6 = 0 ; + int inetd_compat = 0 ; + int dont_fork = 0; + +@@ -128,6 +129,8 @@ int opt_recognize( int argc, char *argv[] ) + fprintf(stderr, "\n"); + exit(0); + } ++ else if ( strcmp ( &argv[ arg ][ 1 ], "inetd_ipv6" ) == 0 ) ++ inetd_ipv6 = 1; + else if ( strcmp ( &argv[ arg ][ 1 ], "inetd_compat" ) == 0 ) + inetd_compat = 1; + } +diff --git a/xinetd/xinetd.man b/xinetd/xinetd.man +index c76c3c6..c9dd803 100644 +--- a/xinetd/xinetd.man ++++ b/xinetd/xinetd.man +@@ -106,6 +106,12 @@ This option causes xinetd to read /etc/inetd.conf in addition to the + standard xinetd config files. /etc/inetd.conf is read after the + standard xinetd config files. + .TP ++.BI \-inetd_ipv6 ++This option causes xinetd to bind to IPv6 (AF_INET6) addresses for ++inetd compatibility lines (see previous option). This only affects ++how /etc/inetd.conf is interpreted and thus only has any effect if ++the \-inetd_compat option is also used. ++.TP + .BI \-cc " interval" + This option instructs + .B xinetd +-- +1.5.5.rc0.127.gb4337 + --- xinetd-2.3.14.orig/debian/xinetd.d/time +++ xinetd-2.3.14/debian/xinetd.d/time @@ -0,0 +1,28 @@ +# default: off +# description: An RFC 868 time server. This protocol provides a +# site-independent, machine readable date and time. The Time service sends back +# to the originating source the time in seconds since midnight on January first +# 1900. +# This is the tcp version. +service time +{ + disable = yes + type = INTERNAL + id = time-stream + socket_type = stream + protocol = tcp + user = root + wait = no +} + +# This is the udp version. +service time +{ + disable = yes + type = INTERNAL + id = time-dgram + socket_type = dgram + protocol = udp + user = root + wait = yes +} --- xinetd-2.3.14.orig/debian/xinetd.d/daytime +++ xinetd-2.3.14/debian/xinetd.d/daytime @@ -0,0 +1,26 @@ +# default: off +# description: An internal xinetd service which gets the current system time +# then prints it out in a format like this: "Wed Nov 13 22:30:27 EST 2002". +# This is the tcp version. +service daytime +{ + disable = yes + type = INTERNAL + id = daytime-stream + socket_type = stream + protocol = tcp + user = root + wait = no +} + +# This is the udp version. +service daytime +{ + disable = yes + type = INTERNAL + id = daytime-dgram + socket_type = dgram + protocol = udp + user = root + wait = yes +} --- xinetd-2.3.14.orig/debian/xinetd.d/chargen +++ xinetd-2.3.14/debian/xinetd.d/chargen @@ -0,0 +1,28 @@ +# default: off +# description: An xinetd internal service which generate characters. The +# xinetd internal service which continuously generates characters until the +# connection is dropped. The characters look something like this: +# !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg +# This is the tcp version. +service chargen +{ + disable = yes + type = INTERNAL + id = chargen-stream + socket_type = stream + protocol = tcp + user = root + wait = no +} + +# This is the udp version. +service chargen +{ + disable = yes + type = INTERNAL + id = chargen-dgram + socket_type = dgram + protocol = udp + user = root + wait = yes +} --- xinetd-2.3.14.orig/debian/xinetd.d/echo +++ xinetd-2.3.14/debian/xinetd.d/echo @@ -0,0 +1,26 @@ +# default: off +# description: An xinetd internal service which echo's characters back to +# clients. +# This is the tcp version. +service echo +{ + disable = yes + type = INTERNAL + id = echo-stream + socket_type = stream + protocol = tcp + user = root + wait = no +} + +# This is the udp version. +service echo +{ + disable = yes + type = INTERNAL + id = echo-dgram + socket_type = dgram + protocol = udp + user = root + wait = yes +} --- xinetd-2.3.14.orig/debian/xinetd.d/discard +++ xinetd-2.3.14/debian/xinetd.d/discard @@ -0,0 +1,25 @@ +# default: off +# description: An RFC 863 discard server. +# This is the tcp version. +service discard +{ + disable = yes + type = INTERNAL + id = discard-stream + socket_type = stream + protocol = tcp + user = root + wait = no +} + +# This is the udp version. +service discard +{ + disable = yes + type = INTERNAL + id = discard-dgram + socket_type = dgram + protocol = udp + user = root + wait = yes +}