--- xserver-xorg-driver-ati-6.5.7.3.orig/man/radeon.man +++ xserver-xorg-driver-ati-6.5.7.3/man/radeon.man @@ -13,10 +13,11 @@ .fi .SH DESCRIPTION .B radeon -is a __xservername__ driver for ATI RADEON based video cards. It contains +is an __xservername__ driver for ATI RADEON based video cards. It contains full support for 8, 15, 16 and 24 bit pixel depths, dual-head setup, flat panel, hardware 2D acceleration, hardware 3D acceleration -(except R300 and R400 series cards), hardware cursor, XV extension, Xinerama extension. +(experimental on R300 and R400 series cards), hardware cursor, XV extension, +and the Xinerama extension. .SH SUPPORTED HARDWARE The .B radeon @@ -162,9 +163,8 @@ others \-\- invalid .TP .BI "Option \*qAGPFastWrite\*q \*q" boolean \*q -Enable AGP fast write. -.br -(used only when DRI is enabled) +Enable AGP fast write. Enabling this option is frequently the cause of +instability. Used only when the DRI is enabled. .br The default is .B off. @@ -512,6 +512,18 @@ possibly unstable. The default is .B XAA. .TP +.BI "Option \*qFBTexPercent\*q \*q" integer \*q +Amount of video RAM to reserve for OpenGL textures, in percent. With EXA, the +remainder of video RAM is reserved for EXA offscreen management. Specifying 0 +results in all offscreen video RAM being reserved for EXA and only GART memory +being available for OpenGL textures. This may improve EXA performance, but +beware that it may cause problems with OpenGL drivers from Mesa versions older +than 6.4. With XAA, specifiying lower percentage than what gets reserved without +this option has no effect, but the driver tries to increase the video RAM +reserved for textures to the amount specified roughly. +Default: +.B 50. +.TP .BI "Option \*qDMAForXv\*q \*q" boolean \*q Try or don't try to use DMA for Xv image transfers. This will reduce CPU usage when playing big videos like DVDs, but may cause instabilities. @@ -558,7 +570,7 @@ using hotkeys (e.g., fn-f7, etc.). Since the driver does not support ACPI, there is no way to validate modes on an output switch and the BIOS can potentially change things behind the driver's back. The default is -.B off. +.B on. .TP .BI "Option \*qVGAAccess\*q \*q" boolean \*q Tell the driver if it can do legacy VGA IOs to the card. This is @@ -593,4 +605,12 @@ __xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), xorgconfig(__appmansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__) .SH AUTHORS .nf -Authors include: ... +Authors include: +Rickard E. (Rik) Faith \fIfaith@precisioninsight.com\fP +Kevin E. Martin \fIkem@freedesktop.org\fP +Alan Hourihane \fIalanh@fairlite.demon.co.uk\fP +Marc Aurele La France \fItsi@xfree86.org\fP +Benjamin Herrenschmidt \fIbenh@kernel.crashing.org\fP +Alex Deucher \fIalexdeucher@gmail.com\fP +Bogdan D. \fIbogdand@users.sourceforge.net\fP +Eric Anholt \fIeric@anholt.net\fP --- xserver-xorg-driver-ati-6.5.7.3.orig/man/ati.man +++ xserver-xorg-driver-ati-6.5.7.3/man/ati.man @@ -14,17 +14,21 @@ .fi .SH DESCRIPTION .B ati -is an __xservername__ driver for ATI video cards. -THIS MAN PAGE NEEDS TO BE FILLED IN. +is an __xservername__ wrapper driver for ATI video cards. It autodetects +whether your hardware has a Radeon, Rage 128, or Mach64 or earlier class of +chipset, and loads the radeon(__drivermansuffix__), +r128(__drivermansuffix__), or atimisc(__drivermansuffix__) driver as +appropriate. .SH SUPPORTED HARDWARE The .B ati -driver supports... +driver supports Radeon, Rage 128, and Mach64 and earlier chipsets by loading +those drivers. See those manpages for specific cards supported. .SH CONFIGURATION DETAILS Please refer to __xconfigfile__(__filemansuffix__) for general configuration -details. This section only covers configuration details specific to this +details, and the specific card driver for driver configuration details. driver. .SH "SEE ALSO" __xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), xorgconfig(__appmansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__) .SH AUTHORS -Authors include: ... +See the individual driver pages for authors. --- xserver-xorg-driver-ati-6.5.7.3.orig/man/Makefile.am +++ xserver-xorg-driver-ati-6.5.7.3/man/Makefile.am @@ -1,4 +1,4 @@ -# $Id: Makefile.am,v 1.7 2005/12/06 22:48:33 kem Exp $ +# $Id: Makefile.am,v 1.6 2005/11/28 22:04:08 alanc Exp $ # # Copyright 2005 Sun Microsystems, Inc. All rights reserved. # --- xserver-xorg-driver-ati-6.5.7.3.orig/man/Makefile.in +++ xserver-xorg-driver-ati-6.5.7.3/man/Makefile.in @@ -14,7 +14,7 @@ @SET_MAKE@ -# $Id: Makefile.am,v 1.7 2005/12/06 22:48:33 kem Exp $ +# $Id: Makefile.am,v 1.6 2005/11/28 22:04:08 alanc Exp $ # # Copyright 2005 Sun Microsystems, Inc. All rights reserved. # --- xserver-xorg-driver-ati-6.5.7.3.orig/man/CVS/Root +++ xserver-xorg-driver-ati-6.5.7.3/man/CVS/Root @@ -0,0 +1 @@ +:pserver:anoncvs@cvs.freedesktop.org:/cvs/xorg --- xserver-xorg-driver-ati-6.5.7.3.orig/man/CVS/Repository +++ xserver-xorg-driver-ati-6.5.7.3/man/CVS/Repository @@ -0,0 +1 @@ +driver/xf86-video-ati/man --- xserver-xorg-driver-ati-6.5.7.3.orig/man/CVS/Entries +++ xserver-xorg-driver-ati-6.5.7.3/man/CVS/Entries @@ -0,0 +1,6 @@ +/r128.man/1.5/Thu Dec 15 23:15:37 2005//Tati-1-0-branch +/radeon.man/1.25.2.2/Thu Apr 6 05:07:36 2006//Tati-1-0-branch +/.cvsignore/1.1/Mon May 1 03:52:01 2006//Tati-1-0-branch +/Makefile.am/1.7/Mon May 1 03:52:01 2006//Tati-1-0-branch +/ati.man/1.2.36.1/Mon May 1 03:52:01 2006//Tati-1-0-branch +D --- xserver-xorg-driver-ati-6.5.7.3.orig/man/CVS/Tag +++ xserver-xorg-driver-ati-6.5.7.3/man/CVS/Tag @@ -0,0 +1 @@ +Tati-1-0-branch --- xserver-xorg-driver-ati-6.5.7.3.orig/man/.cvsignore +++ xserver-xorg-driver-ati-6.5.7.3/man/.cvsignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in --- xserver-xorg-driver-ati-6.5.7.3.orig/src/theatre_detect.h +++ xserver-xorg-driver-ati-6.5.7.3/src/theatre_detect.h @@ -1,5 +1,5 @@ /************************************************************************************* - * $Id: theatre_detect.h,v 1.3 2005/08/28 18:00:23 bogdand Exp $ + * $Id: theatre_detect.h,v 1.2 2005/07/01 22:43:11 daniels Exp $ * * Copyright (C) 2005 Bogdan D. bogdand@users.sourceforge.net * @@ -23,9 +23,6 @@ * authorization from the author. * * $Log: theatre_detect.h,v $ - * Revision 1.3 2005/08/28 18:00:23 bogdand - * Modified the licens type from GPL to a X/MIT one - * * Revision 1.2 2005/07/01 22:43:11 daniels * Change all misc.h and os.h references to . * --- xserver-xorg-driver-ati-6.5.7.3.orig/src/theatre200.h +++ xserver-xorg-driver-ati-6.5.7.3/src/theatre200.h @@ -1,5 +1,5 @@ /************************************************************************************* - * $Id: theatre200.h,v 1.5 2005/12/08 17:54:40 kem Exp $ + * $Id: theatre200.h,v 1.4 2005/11/07 19:28:40 bogdand Exp $ * * Copyright (C) 2005 Bogdan D. bogdand@users.sourceforge.net * @@ -23,9 +23,6 @@ * authorization from the author. * * $Log: theatre200.h,v $ - * Revision 1.5 2005/12/08 17:54:40 kem - * Allow hard-coded paths to be configurable. - * * Revision 1.4 2005/11/07 19:28:40 bogdand * Replaced the variadic macros(gcc) by macros according to C99 standard * --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_reg.h +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_reg.h @@ -307,9 +307,9 @@ # define RADEON_CRTC_DBL_SCAN_EN (1 << 0) # define RADEON_CRTC_INTERLACE_EN (1 << 1) # define RADEON_CRTC_CSYNC_EN (1 << 4) +# define RADEON_CRTC_ICON_EN (1 << 15) # define RADEON_CRTC_CUR_EN (1 << 16) # define RADEON_CRTC_CUR_MODE_MASK (7 << 17) -# define RADEON_CRTC_ICON_EN (1 << 20) # define RADEON_CRTC_EXT_DISP_EN (1 << 24) # define RADEON_CRTC_EN (1 << 25) # define RADEON_CRTC_DISP_REQ_EN_B (1 << 26) @@ -364,6 +364,8 @@ # define RADEON_CRTC_OFFSET__OFFSET_LOCK (1<<31) #define RADEON_CRTC2_OFFSET 0x0324 +# define RADEON_CRTC2_OFFSET__GUI_TRIG_OFFSET (1<<30) +# define RADEON_CRTC2_OFFSET__OFFSET_LOCK (1<<31) #define RADEON_CRTC_OFFSET_CNTL 0x0228 # define RADEON_CRTC_TILE_LINE_SHIFT 0 # define RADEON_CRTC_TILE_LINE_RIGHT_SHIFT 4 @@ -392,6 +394,7 @@ #define R300_CRTC2_TILE_X0_Y0 0x0358 #define RADEON_CRTC2_OFFSET_CNTL 0x0328 +# define RADEON_CRTC2_OFFSET_FLIP_CNTL (1 << 16) # define RADEON_CRTC2_TILE_EN (1 << 15) #define RADEON_CRTC_PITCH 0x022c # define RADEON_CRTC_PITCH__SHIFT 0 @@ -812,6 +815,7 @@ #define RADEON_HOST_DATA_LAST 0x17e0 #define RADEON_HOST_PATH_CNTL 0x0130 # define RADEON_HDP_SOFT_RESET (1 << 26) +# define RADEON_HDP_APER_CNTL (1 << 23) #define RADEON_HTOTAL_CNTL 0x0009 /* PLL */ #define RADEON_HTOTAL2_CNTL 0x002e /* PLL */ @@ -848,6 +852,9 @@ #define RADEON_MAX_LATENCY 0x0f3f /* PCI */ #define RADEON_MC_AGP_LOCATION 0x014c #define RADEON_MC_FB_LOCATION 0x0148 +#define RADEON_MC_STATUS 0x0150 +# define RADEON_MC_IDLE (1 << 2) +# define R300_MC_IDLE (1 << 4) #define RADEON_DISPLAY_BASE_ADDR 0x23c #define RADEON_DISPLAY2_BASE_ADDR 0x33c #define RADEON_OV0_BASE_ADDR 0x43c @@ -925,6 +932,14 @@ # define RADEON_EXCL_VERT_START_MASK 0x000003ff # define RADEON_EXCL_VERT_END_MASK 0x03ff0000 #define RADEON_OV0_FILTER_CNTL 0x04A0 +# define RADEON_FILTER_PROGRAMMABLE_COEF 0x0 +# define RADEON_FILTER_HC_COEF_HORZ_Y 0x1 +# define RADEON_FILTER_HC_COEF_HORZ_UV 0x2 +# define RADEON_FILTER_HC_COEF_VERT_Y 0x4 +# define RADEON_FILTER_HC_COEF_VERT_UV 0x8 +# define RADEON_FILTER_HARDCODED_COEF 0xf +# define RADEON_FILTER_COEF_MASK 0xf + #define RADEON_OV0_FOUR_TAP_COEF_0 0x04B0 #define RADEON_OV0_FOUR_TAP_COEF_1 0x04B4 #define RADEON_OV0_FOUR_TAP_COEF_2 0x04B8 @@ -1012,14 +1027,15 @@ # define RADEON_SCALER_SOURCE_YVYU422 0x00000C00L # define RADEON_SCALER_ADAPTIVE_DEINT 0x00001000L # define RADEON_SCALER_TEMPORAL_DEINT 0x00002000L +# define RADEON_SCALER_CRTC_SEL 0x00004000L # define RADEON_SCALER_SMART_SWITCH 0x00008000L # define RADEON_SCALER_BURST_PER_PLANE 0x007F0000L # define RADEON_SCALER_DOUBLE_BUFFER 0x01000000L # define RADEON_SCALER_DIS_LIMIT 0x08000000L +# define RADEON_SCALER_LIN_TRANS_BYPASS 0x10000000L # define RADEON_SCALER_INT_EMU 0x20000000L # define RADEON_SCALER_ENABLE 0x40000000L # define RADEON_SCALER_SOFT_RESET 0x80000000L -# define RADEON_SCALER_ADAPTIVE_DEINT 0x00001000L #define RADEON_OV0_STEP_BY 0x0484 #define RADEON_OV0_TEST 0x04F8 #define RADEON_OV0_V_INC 0x0424 --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon.h +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon.h @@ -41,6 +41,7 @@ #include "xf86str.h" #include "xf86_ansic.h" #include "compiler.h" +#include "xf86fbman.h" /* PCI support */ #include "xf86Pci.h" @@ -50,7 +51,6 @@ #endif #ifdef USE_XAA #include "xaa.h" -#include "xf86fbman.h" #endif /* Exa and Cursor Support */ @@ -102,7 +102,7 @@ /* ------------------------------------- */ -#define RADEON_DEBUG 0 /* Turn off debugging output */ +#define RADEON_DEBUG 1 /* Turn off debugging output */ #define RADEON_IDLE_RETRY 16 /* Fall out of idle loops after this count */ #define RADEON_TIMEOUT 2000000 /* Fall out of wait loops after this count */ #define RADEON_MMIOSIZE 0x80000 @@ -116,13 +116,13 @@ */ #if RADEON_DEBUG -#define RADEONTRACE(x) \ +#define RADEONTRACE(x) \ do { \ ErrorF("(**) %s(%d): ", RADEON_NAME, pScrn->scrnIndex); \ ErrorF x; \ -} while (0); +} while(0) #else -#define RADEONTRACE(x) +#define RADEONTRACE(x) do { } while(0) #endif @@ -147,10 +147,16 @@ CARD32 cap0_trig_cntl; CARD32 cap1_trig_cntl; CARD32 bus_cntl; - CARD32 surface_cntl; CARD32 bios_4_scratch; CARD32 bios_5_scratch; CARD32 bios_6_scratch; + CARD32 surface_cntl; + CARD32 surfaces[8][3]; + CARD32 mc_agp_location; + CARD32 mc_fb_location; + CARD32 display_base_addr; + CARD32 display2_base_addr; + CARD32 ov0_base_addr; /* Other registers to save for VT switches */ CARD32 dp_datatype; @@ -158,8 +164,6 @@ CARD32 clock_cntl_index; CARD32 amcgpio_en_reg; CARD32 amcgpio_mask; - - CARD32 surfaces[8][3]; /* CRTC registers */ CARD32 crtc_gen_cntl; @@ -274,6 +278,8 @@ CHIP_FAMILY_RV350, CHIP_FAMILY_RV380, /* RV370/RV380/M22/M24 */ CHIP_FAMILY_R420, /* R420/R423/M18 */ + CHIP_FAMILY_RV410, /* RV410, M26 */ + CHIP_FAMILY_RS400, /* xpress 200, 200m (RS400/410/480) */ CHIP_FAMILY_LAST } RADEONChipFamily; @@ -290,7 +296,9 @@ (info->ChipFamily == CHIP_FAMILY_RV350) || \ (info->ChipFamily == CHIP_FAMILY_R350) || \ (info->ChipFamily == CHIP_FAMILY_RV380) || \ - (info->ChipFamily == CHIP_FAMILY_R420)) + (info->ChipFamily == CHIP_FAMILY_R420) || \ + (info->ChipFamily == CHIP_FAMILY_RV410) || \ + (info->ChipFamily == CHIP_FAMILY_RS400)) /* * Errata workarounds @@ -326,6 +334,8 @@ unsigned long MMIOAddr; /* MMIO region physical address */ unsigned long BIOSAddr; /* BIOS physical address */ unsigned int fbLocation; + CARD32 mc_fb_location; + CARD32 mc_agp_location; unsigned char *MMIO; /* Map of MMIO region */ unsigned char *FB; /* Map of frame buffer */ @@ -338,7 +348,8 @@ CARD32 MemCntl; CARD32 BusCntl; unsigned long FbMapSize; /* Size of frame buffer, in bytes */ - unsigned long FbSecureSize; /* Size of secured fb area at end of framebuffer */ + unsigned long FbSecureSize; /* Size of secured fb area at end of + framebuffer */ int Flags; /* Saved copy of mode flags */ /* VE/M6 support */ @@ -399,14 +410,14 @@ #ifdef USE_EXA ExaDriverRec exa; -#endif -#ifdef USE_XAA - XAAInfoRecPtr accel; int engineMode; #define EXA_ENGINEMODE_UNKNOWN 0 #define EXA_ENGINEMODE_2D 1 #define EXA_ENGINEMODE_3D 2 #endif +#ifdef USE_XAA + XAAInfoRecPtr accel; +#endif Bool accelOn; xf86CursorInfoPtr cursor; #ifdef USE_EXA @@ -480,13 +491,18 @@ RADEONFBLayout CurrentLayout; CARD32 dst_pitch_offset; #ifdef XF86DRI - Bool noBackBuffer; + Bool noBackBuffer; Bool directRenderingEnabled; + Bool directRenderingInited; + Bool newMemoryMap; + drmVersionPtr pLibDRMVersion; + drmVersionPtr pKernelDRMVersion; DRIInfoPtr pDRIInfo; int drmFD; int numVisualConfigs; __GLXvisualConfig *pVisualConfigs; RADEONConfigPrivPtr pVisualConfigsPriv; + Bool (*DRICloseScreen)(int, ScreenPtr); drm_handle_t fbHandle; @@ -501,7 +517,6 @@ Bool depthMoves; /* Enable depth moves -- slow! */ Bool allowPageFlip; /* Enable 3d page flipping */ Bool have3DWindows; /* Are there any 3d clients? */ - int drmMinor; drmSize gartSize; drm_handle_t agpMemHandle; /* Handle from drmAgpAlloc */ @@ -573,7 +588,7 @@ int pciGartSize; CARD32 pciGartOffset; - + void *pciGartBackup; #ifdef USE_XAA CARD32 frontPitchOffset; CARD32 backPitchOffset; @@ -766,11 +781,14 @@ #ifdef USE_XAA extern void RADEONAccelInitCP(ScreenPtr pScreen, XAAInfoRecPtr a); #endif +extern Bool RADEONDRIGetVersion(ScrnInfoPtr pScrn); extern Bool RADEONDRIScreenInit(ScreenPtr pScreen); extern void RADEONDRICloseScreen(ScreenPtr pScreen); extern void RADEONDRIResume(ScreenPtr pScreen); extern Bool RADEONDRIFinishScreenInit(ScreenPtr pScreen); extern void RADEONDRIAllocatePCIGARTTable(ScreenPtr pScreen); +extern void RADEONDRIInitPageFlip(ScreenPtr pScreen); +extern void RADEONDRIStop(ScreenPtr pScreen); extern drmBufPtr RADEONCPGetBuffer(ScrnInfoPtr pScrn); extern void RADEONCPFlushIndirect(ScrnInfoPtr pScrn, int discard); --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_exa_render.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_exa_render.c @@ -116,8 +116,8 @@ static struct formatinfo R200TexFormats[] = { {PICT_a8r8g8b8, 0, R200_TXFORMAT_ARGB8888 | R200_TXFORMAT_ALPHA_IN_MAP}, {PICT_x8r8g8b8, 0, R200_TXFORMAT_ARGB8888}, - {PICT_a8r8g8b8, 1, R200_TXFORMAT_RGBA8888 | R200_TXFORMAT_ALPHA_IN_MAP}, - {PICT_x8r8g8b8, 1, R200_TXFORMAT_RGBA8888}, + {PICT_a8b8g8r8, 1, R200_TXFORMAT_RGBA8888 | R200_TXFORMAT_ALPHA_IN_MAP}, + {PICT_x8b8g8r8, 1, R200_TXFORMAT_RGBA8888}, {PICT_r5g6b5, 0, R200_TXFORMAT_RGB565}, {PICT_a1r5g5b5, 0, R200_TXFORMAT_ARGB1555 | R200_TXFORMAT_ALPHA_IN_MAP}, {PICT_x1r5g5b5, 0, R200_TXFORMAT_ARGB1555}, @@ -223,6 +223,11 @@ txpitch = exaGetPixmapPitch(pPix); txoffset = exaGetPixmapOffset(pPix) + info->fbLocation; + if ((txoffset & 0x1f) != 0) + RADEON_FALLBACK(("Bad texture offset 0x%x\n", (int)txoffset)); + if ((txpitch & 0x1f) != 0) + RADEON_FALLBACK(("Bad texture pitch 0x%x\n", (int)txpitch)); + for (i = 0; i < sizeof(R100TexFormats) / sizeof(R100TexFormats[0]); i++) { if (R100TexFormats[i].fmt == pPict->format) @@ -241,11 +246,6 @@ txformat |= RADEON_TXFORMAT_NON_POWER2; txformat |= unit << 24; /* RADEON_TXFORMAT_ST_ROUTE_STQX */ - if ((txoffset & 0x1f) != 0) - RADEON_FALLBACK(("Bad texture offset 0x%x\n", (int)txoffset)); - if ((txpitch & 0x1f) != 0) - RADEON_FALLBACK(("Bad texture pitch 0x%x\n", (int)txpitch)); - switch (pPict->filter) { case PictFilterNearest: txfilter = (RADEON_MAG_FILTER_NEAREST | RADEON_MIN_FILTER_NEAREST); @@ -466,6 +466,11 @@ txpitch = exaGetPixmapPitch(pPix); txoffset = exaGetPixmapOffset(pPix) + info->fbLocation; + if ((txoffset & 0x1f) != 0) + RADEON_FALLBACK(("Bad texture offset 0x%x\n", (int)txoffset)); + if ((txpitch & 0x1f) != 0) + RADEON_FALLBACK(("Bad texture pitch 0x%x\n", (int)txpitch)); + for (i = 0; i < sizeof(R200TexFormats) / sizeof(R200TexFormats[0]); i++) { if (R200TexFormats[i].fmt == pPict->format) @@ -484,11 +489,6 @@ txformat |= R200_TXFORMAT_NON_POWER2; txformat |= unit << R200_TXFORMAT_ST_ROUTE_SHIFT; - if ((txoffset & 0x1f) != 0) - RADEON_FALLBACK(("Bad texture offset 0x%x\n", (int)txoffset)); - if ((txpitch & 0x1f) != 0) - RADEON_FALLBACK(("Bad texture pitch 0x%x\n", (int)txpitch)); - switch (pPict->filter) { case PictFilterNearest: txfilter = (R200_MAG_FILTER_NEAREST | --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_commonfuncs.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_commonfuncs.c @@ -155,9 +155,11 @@ } #endif +#if 0 RADEONTRACE(("WaitForIdle (entering): %d entries, stat=0x%08x\n", INREG(RADEON_RBBM_STATUS) & RADEON_RBBM_FIFOCNT_MASK, INREG(RADEON_RBBM_STATUS))); +#endif /* Wait for the engine to go idle */ RADEONWaitForFifoFunction(pScrn, 64); --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_common.h +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_common.h @@ -31,7 +31,7 @@ * Converted to common header format: * Jens Owen * - * $XdotOrg: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_common.h,v 1.5 2005/01/26 18:23:40 sroland Exp $ + * $XdotOrg: driver/xf86-video-ati/src/radeon_common.h,v 1.8 2006-02-16 23:27:44 benh Exp $ * $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_common.h,v 1.8tsi Exp $ * */ @@ -474,6 +474,7 @@ #define RADEON_SETPARAM_FB_LOCATION 1 #define RADEON_SETPARAM_SWITCH_TILING 2 #define RADEON_SETPARAM_PCIGART_LOCATION 3 +#define RADEON_SETPARAM_NEW_MEMMAP 4 /* 1.14: Clients can allocate/free a surface */ --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_chipset.h +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_chipset.h @@ -33,7 +33,7 @@ { PCI_CHIP_RS300_5835, "ATI Radeon Mobility 9100 IGP (U3) 5835" }, { PCI_CHIP_RS350_7834, "ATI Radeon 9100 PRO IGP 7834" }, { PCI_CHIP_RS350_7835, "ATI Radeon Mobility 9200 IGP 7835" }, - { PCI_CHIP_RV280_5960, "ATI Radeon 9200PRO 5960 (AGP)" }, + { PCI_CHIP_RV280_5960, "ATI Radeon 9250 5960 (AGP)" }, { PCI_CHIP_RV280_5961, "ATI Radeon 9200 5961 (AGP)" }, { PCI_CHIP_RV280_5962, "ATI Radeon 9200 5962 (AGP)" }, { PCI_CHIP_RV280_5964, "ATI Radeon 9200SE 5964 (AGP)" }, @@ -46,7 +46,7 @@ { PCI_CHIP_R300_AG, "ATI FireGL Z1 AG (AGP)" }, { PCI_CHIP_R300_ND, "ATI Radeon 9700 Pro ND (AGP)" }, { PCI_CHIP_R300_NE, "ATI Radeon 9700/9500Pro NE (AGP)" }, - { PCI_CHIP_R300_NF, "ATI Radeon 9700 NF (AGP)" }, + { PCI_CHIP_R300_NF, "ATI Radeon 9600TX NF (AGP)" }, { PCI_CHIP_R300_NG, "ATI FireGL X1 NG (AGP)" }, { PCI_CHIP_RV350_AP, "ATI Radeon 9600 AP (AGP)" }, { PCI_CHIP_RV350_AQ, "ATI Radeon 9600SE AQ (AGP)" }, @@ -72,12 +72,15 @@ { PCI_CHIP_RV380_3E50, "ATI Radeon X600 (RV380) 3E50 (PCIE)" }, { PCI_CHIP_RV380_3E54, "ATI FireGL V3200 (RV380) 3E54 (PCIE)" }, { PCI_CHIP_RV380_3150, "ATI Radeon Mobility X600 (M24) 3150 (PCIE)" }, + { PCI_CHIP_RV380_3152, "ATI Radeon Mobility X300 (M24) 3152 (PCIE)" }, { PCI_CHIP_RV380_3154, "ATI FireGL M24 GL 3154 (PCIE)" }, { PCI_CHIP_RV370_5B60, "ATI Radeon X300 (RV370) 5B60 (PCIE)" }, { PCI_CHIP_RV370_5B62, "ATI Radeon X600 (RV370) 5B62 (PCIE)" }, + { PCI_CHIP_RV370_5B63, "ATI Radeon X550 (RV370) 5B63 (PCIE)" }, { PCI_CHIP_RV370_5B64, "ATI FireGL V3100 (RV370) 5B64 (PCIE)" }, - { PCI_CHIP_RV370_5B65, "ATI FireGL D1100 (RV370) 5B65 (PCIE)" }, - { PCI_CHIP_RV370_5460, "ATI Radeon Mobility M300 (M22) 5460 (PCIE)" }, + { PCI_CHIP_RV370_5B65, "ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE)" }, + { PCI_CHIP_RV370_5460, "ATI Radeon Mobility X300 (M22) 5460 (PCIE)" }, + { PCI_CHIP_RV370_5462, "ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE)" }, { PCI_CHIP_RV370_5464, "ATI FireGL M22 GL 5464 (PCIE)" }, { PCI_CHIP_RS400_5A41, "ATI Radeon XPRESS 200 5A41 (PCIE)" }, { PCI_CHIP_RS400_5A42, "ATI Radeon XPRESS 200M 5A42 (PCIE)" }, @@ -90,6 +93,7 @@ { PCI_CHIP_RV410_5E48, "ATI FireGL V5000 (RV410) (PCIE)" }, { PCI_CHIP_RV410_564A, "ATI Mobility FireGL V5000 (M26) (PCIE)" }, { PCI_CHIP_RV410_564B, "ATI Mobility FireGL V5000 (M26) (PCIE)" }, + { PCI_CHIP_RV410_564F, "ATI Mobility Radeon X700 XL (M26) (PCIE)" }, { PCI_CHIP_RV410_5652, "ATI Mobility Radeon X700 (M26) (PCIE)" }, { PCI_CHIP_RV410_5653, "ATI Mobility Radeon X700 (M26) (PCIE)" }, { PCI_CHIP_RV410_5E4B, "ATI Radeon X700 PRO (RV410) (PCIE)" }, @@ -106,13 +110,14 @@ { PCI_CHIP_R420_JN, "ATI Radeon Mobility 9800 (M18) JN (AGP)" }, { PCI_CHIP_R420_JP, "ATI Radeon X800XT (R420) JP (AGP)" }, { PCI_CHIP_R420_4A4F, "ATI Radeon X800 SE (R420) (AGP)" }, + { PCI_CHIP_R420_4A54, "ATI Radeon AIW X800 VE (R420) JT (AGP)" }, { PCI_CHIP_R423_UH, "ATI Radeon X800 (R423) UH (PCIE)" }, { PCI_CHIP_R423_UI, "ATI Radeon X800PRO (R423) UI (PCIE)" }, { PCI_CHIP_R423_UJ, "ATI Radeon X800LE (R423) UJ (PCIE)" }, { PCI_CHIP_R423_UK, "ATI Radeon X800SE (R423) UK (PCIE)" }, - { PCI_CHIP_R423_UQ, "ATI FireGL V7200 (R423) UQ (PCIE)" }, - { PCI_CHIP_R423_UR, "ATI FireGL V5100 (R423) UR (PCIE)" }, - { PCI_CHIP_R423_UT, "ATI FireGL V7100 (R423) UT (PCIE)" }, + { PCI_CHIP_R423_UQ, "ATI FireGL V5100 (R423) UQ (PCIE)" }, + { PCI_CHIP_R423_UR, "ATI FireGL unknown (R423) UR (PCIE)" }, + { PCI_CHIP_R423_UT, "ATI FireGL unknown (R423) UT (PCIE)" }, { PCI_CHIP_R423_5D57, "ATI Radeon X800XT (R423) 5D57 (PCIE)" }, { PCI_CHIP_R423_5550, "ATI FireGL V7100 (R423) (PCIE)" }, { PCI_CHIP_R430_5D49, "ATI Mobility FireGL V5100 (M28) (PCIE)" }, @@ -123,7 +128,7 @@ { PCI_CHIP_R430_554E, "ATI Radeon X800 SE (R430) (PCIE)" }, { PCI_CHIP_R430_554C, "ATI Radeon X800 XTP (R430) (PCIE)" }, { PCI_CHIP_R480_5D4C, "ATI Radeon X850 5D4C (PCIE)" }, - { PCI_CHIP_R480_5D50, "ATI Radeon FireGL (R480) GL 5D50 (PCIE)" }, + { PCI_CHIP_R480_5D50, "ATI unknown Radeon / FireGL (R480) 5D50 (PCIE)" }, { PCI_CHIP_R480_5D4E, "ATI Radeon X850 SE (R480) (PCIE)" }, { PCI_CHIP_R480_5D4F, "ATI Radeon X850 PRO (R480) (PCIE)" }, { PCI_CHIP_R480_5D52, "ATI Radeon X850 XT (R480) (PCIE)" }, --- xserver-xorg-driver-ati-6.5.7.3.orig/src/ativersion.h +++ xserver-xorg-driver-ati-6.5.7.3/src/ativersion.h @@ -39,7 +39,7 @@ #define ATI_VERSION_MAJOR 6 #define ATI_VERSION_MINOR 5 -#define ATI_VERSION_PATCH 7 +#define ATI_VERSION_PATCH 8 #ifndef ATI_VERSION_EXTRA #define ATI_VERSION_EXTRA "" --- xserver-xorg-driver-ati-6.5.7.3.orig/src/ati.h +++ xserver-xorg-driver-ati-6.5.7.3/src/ati.h @@ -25,7 +25,7 @@ #define ___ATI_H___ 1 #include "xf86Pci.h" -#include "xf86PciInfo.h" +#include "atipciids.h" #include "xf86.h" --- xserver-xorg-driver-ati-6.5.7.3.orig/src/atichip.h +++ xserver-xorg-driver-ati-6.5.7.3/src/atichip.h @@ -108,7 +108,12 @@ ATI_CHIP_RV370, /* RV370/M22 */ ATI_CHIP_RV380, /* RV380/M24 */ ATI_CHIP_R420, /* R420/M18 */ - ATI_CHIP_R423, /* R423 */ + ATI_CHIP_R423, /* R423/M28? */ + ATI_CHIP_R430, /* R430 */ + ATI_CHIP_R480, /* R480/M28? */ + ATI_CHIP_R481, /* R481 */ + ATI_CHIP_RV410, /* RV410, M26 */ + ATI_CHIP_RS400, /* RS400, RS410, RS480, RS482, ... */ ATI_CHIP_Radeon, /* Last among Radeon's */ ATI_CHIP_HDTV /* HDTV */ } ATIChipType; --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_render.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_render.c @@ -315,29 +315,27 @@ { RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; + CARD32 swapper = info->ModeReg.surface_cntl; + + swapper &= ~(RADEON_NONSURF_AP0_SWP_16BPP | RADEON_NONSURF_AP1_SWP_16BPP | + RADEON_NONSURF_AP0_SWP_32BPP | RADEON_NONSURF_AP1_SWP_32BPP); /* Set up byte swapping for the framebuffer aperture as needed */ switch (tex_bytepp) { case 1: - OUTREG(RADEON_SURFACE_CNTL, info->ModeReg.surface_cntl & - ~(RADEON_NONSURF_AP0_SWP_32BPP - | RADEON_NONSURF_AP0_SWP_16BPP)); break; case 2: - OUTREG(RADEON_SURFACE_CNTL, (info->ModeReg.surface_cntl & - ~RADEON_NONSURF_AP0_SWP_32BPP) - | RADEON_NONSURF_AP0_SWP_16BPP); + swapper |= RADEON_NONSURF_AP0_SWP_16BPP | RADEON_NONSURF_AP1_SWP_16BPP; break; case 4: - OUTREG(RADEON_SURFACE_CNTL, (info->ModeReg.surface_cntl & - ~RADEON_NONSURF_AP0_SWP_16BPP) - | RADEON_NONSURF_AP0_SWP_32BPP); + swapper |= RADEON_NONSURF_AP0_SWP_32BPP | RADEON_NONSURF_AP1_SWP_32BPP; break; default: xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "%s: Don't know what to do for " "tex_bytepp == %d!\n", __func__, tex_bytepp); return FALSE; } + OUTREG(RADEON_SURFACE_CNTL, swapper); return TRUE; } --- xserver-xorg-driver-ati-6.5.7.3.orig/src/theatre_detect_module.c +++ xserver-xorg-driver-ati-6.5.7.3/src/theatre_detect_module.c @@ -17,7 +17,7 @@ MODULEVENDORSTRING, MODINFOSTRING1, MODINFOSTRING2, - XF86_VERSION_CURRENT, + XORG_VERSION_CURRENT, 1, 0, 0, ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */ ABI_VIDEODRV_VERSION, --- xserver-xorg-driver-ati-6.5.7.3.orig/src/theatre_detect.c +++ xserver-xorg-driver-ati-6.5.7.3/src/theatre_detect.c @@ -1,5 +1,5 @@ /************************************************************************************* - * $Id: theatre_detect.c,v 1.4 2005/08/28 18:00:23 bogdand Exp $ + * $Id: theatre_detect.c,v 1.3 2005/07/11 02:29:45 ajax Exp $ * * Copyright (C) 2005 Bogdan D. bogdand@users.sourceforge.net * @@ -23,9 +23,6 @@ * authorization from the author. * * $Log: theatre_detect.c,v $ - * Revision 1.4 2005/08/28 18:00:23 bogdand - * Modified the licens type from GPL to a X/MIT one - * * Revision 1.3 2005/07/11 02:29:45 ajax * Prep for modular builds by adding guarded #include "config.h" everywhere. * --- xserver-xorg-driver-ati-6.5.7.3.orig/src/theatre200_module.c +++ xserver-xorg-driver-ati-6.5.7.3/src/theatre200_module.c @@ -13,7 +13,7 @@ MODULEVENDORSTRING, MODINFOSTRING1, MODINFOSTRING2, - XF86_VERSION_CURRENT, + XORG_VERSION_CURRENT, 1, 0, 0, ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */ ABI_VIDEODRV_VERSION, --- xserver-xorg-driver-ati-6.5.7.3.orig/src/theatre200.c +++ xserver-xorg-driver-ati-6.5.7.3/src/theatre200.c @@ -1,5 +1,5 @@ /************************************************************************************* - * $Id: theatre200.c,v 1.5 2005/11/07 19:28:40 bogdand Exp $ + * $Id: theatre200.c,v 1.4 2005/08/28 18:00:23 bogdand Exp $ * * Copyright (C) 2005 Bogdan D. bogdand@users.sourceforge.net * @@ -23,9 +23,6 @@ * authorization from the author. * * $Log: theatre200.c,v $ - * Revision 1.5 2005/11/07 19:28:40 bogdand - * Replaced the variadic macros(gcc) by macros according to C99 standard - * * Revision 1.4 2005/08/28 18:00:23 bogdand * Modified the licens type from GPL to a X/MIT one * --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_dri.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_dri.c @@ -1092,7 +1092,7 @@ drmRadeonMemInitHeap drmHeap; /* Start up the simple memory manager for GART space */ - if (info->drmMinor >= 6) { + if (info->pKernelDRMVersion->version_minor >= 6) { drmHeap.region = RADEON_MEM_REGION_GART; drmHeap.start = 0; drmHeap.size = info->gartTexMapSize; @@ -1109,7 +1109,7 @@ } else { xf86DrvMsg(pScreen->myNum, X_INFO, "[drm] Kernel module too old (1.%d) for GART heap manager\n", - info->drmMinor); + info->pKernelDRMVersion->version_minor); } } @@ -1193,19 +1193,14 @@ } -/* Initialize the screen-specific data structures for the DRI and the - * Radeon. This is the main entry point to the device-specific - * initialization code. It calls device-independent DRI functions to - * create the DRI data structures and initialize the DRI state. - */ -Bool RADEONDRIScreenInit(ScreenPtr pScreen) +/* Get the DRM version and do some basic useability checks of DRI */ +Bool RADEONDRIGetVersion(ScrnInfoPtr pScrn) { - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; RADEONInfoPtr info = RADEONPTR(pScrn); - DRIInfoPtr pDRIInfo; - RADEONDRIPtr pRADEONDRI; - int major, minor, patch; - drmVersionPtr version; + int major, minor, patch, fd; + int req_minor, req_patch; + char *busId; + drmVersionPtr libVersion; /* Check that the GLX, DRI, and DRM modules have been loaded by testing * for known symbols in each module. @@ -1213,16 +1208,17 @@ if (!xf86LoaderCheckSymbol("GlxSetVisualConfigs")) return FALSE; if (!xf86LoaderCheckSymbol("drmAvailable")) return FALSE; if (!xf86LoaderCheckSymbol("DRIQueryVersion")) { - xf86DrvMsg(pScreen->myNum, X_ERROR, - "[dri] RADEONDRIScreenInit failed (libdri.a too old)\n"); + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "[dri] RADEONDRIGetVersion failed (libdri.a too old)\n" + "[dri] Disabling DRI.\n"); return FALSE; } /* Check the DRI version */ DRIQueryVersion(&major, &minor, &patch); if (major != DRIINFO_MAJOR_VERSION || minor < DRIINFO_MINOR_VERSION) { - xf86DrvMsg(pScreen->myNum, X_ERROR, - "[dri] RADEONDRIScreenInit failed because of a version " + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "[dri] RADEONDRIGetVersion failed because of a version " "mismatch.\n" "[dri] libdri version is %d.%d.%d but version %d.%d.x is " "needed.\n" @@ -1232,6 +1228,120 @@ return FALSE; } + /* Check the lib version */ + if (xf86LoaderCheckSymbol("drmGetLibVersion")) + info->pLibDRMVersion = drmGetLibVersion(info->drmFD); + if (info->pLibDRMVersion == NULL) { + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "[dri] RADEONDRIGetVersion failed because libDRM is really " + "way to old to even get a version number out of it.\n" + "[dri] Disabling DRI.\n"); + return FALSE; + } + if (info->pLibDRMVersion->version_major != 1 || + info->pLibDRMVersion->version_minor < 2) { + /* incompatible drm library version */ + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "[dri] RADEONDRIGetVersion failed because of a " + "version mismatch.\n" + "[dri] libdrm.a module version is %d.%d.%d but " + "version 1.2.x is needed.\n" + "[dri] Disabling DRI.\n", + info->pLibDRMVersion->version_major, + info->pLibDRMVersion->version_minor, + info->pLibDRMVersion->version_patchlevel); + drmFreeVersion(info->pLibDRMVersion); + info->pLibDRMVersion = NULL; + return FALSE; + } + + /* Create a bus Id */ + if (xf86LoaderCheckSymbol("DRICreatePCIBusID")) { + busId = DRICreatePCIBusID(info->PciInfo); + } else { + busId = xalloc(64); + sprintf(busId, + "PCI:%d:%d:%d", + info->PciInfo->bus, + info->PciInfo->device, + info->PciInfo->func); + } + + /* Low level DRM open */ + fd = drmOpen(RADEON_DRIVER_NAME, busId); + xfree(busId); + if (fd < 0) { + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "[dri] RADEONDRIGetVersion failed to open the DRM\n" + "[dri] Disabling DRI.\n"); + return FALSE; + } + + /* Get DRM version & close DRM */ + info->pKernelDRMVersion = drmGetVersion(fd); + drmClose(fd); + if (info->pKernelDRMVersion == NULL) { + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "[dri] RADEONDRIGetVersion failed to get the DRM version\n" + "[dri] Disabling DRI.\n"); + return FALSE; + } + + /* Now check if we qualify */ + if (info->ChipFamily >= CHIP_FAMILY_R300) { + req_minor = 17; + req_patch = 0; + } else if (info->IsIGP) { + req_minor = 10; + req_patch = 0; + } else if (info->ChipFamily >= CHIP_FAMILY_R200) { + req_minor = 5; + req_patch = 0; + } else { + req_minor = 3; + req_patch = 0; + } + + /* We don't, bummer ! */ + if (info->pKernelDRMVersion->version_major != 1 || + info->pKernelDRMVersion->version_minor < req_minor || + (info->pKernelDRMVersion->version_minor == req_minor && + info->pKernelDRMVersion->version_patchlevel < req_patch)) { + /* Incompatible drm version */ + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "[dri] RADEONDRIGetVersion failed because of a version " + "mismatch.\n" + "[dri] radeon.o kernel module version is %d.%d.%d " + "but version 1.%d.%d or newer is needed.\n" + "[dri] Disabling DRI.\n", + info->pKernelDRMVersion->version_major, + info->pKernelDRMVersion->version_minor, + info->pKernelDRMVersion->version_patchlevel, + req_minor, + req_patch); + drmFreeVersion(info->pKernelDRMVersion); + info->pKernelDRMVersion = NULL; + return FALSE; + } + + return TRUE; +} + +/* Initialize the screen-specific data structures for the DRI and the + * Radeon. This is the main entry point to the device-specific + * initialization code. It calls device-independent DRI functions to + * create the DRI data structures and initialize the DRI state. + */ +Bool RADEONDRIScreenInit(ScreenPtr pScreen) +{ + ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; + RADEONInfoPtr info = RADEONPTR(pScrn); + DRIInfoPtr pDRIInfo; + RADEONDRIPtr pRADEONDRI; + drmVersionPtr version; + + info->DRICloseScreen = NULL; + switch (info->CurrentLayout.pixel_code) { case 8: case 15: @@ -1350,121 +1460,6 @@ pDRIInfo = NULL; return FALSE; } - - /* Check the DRM lib version. - * drmGetLibVersion was not supported in version 1.0, so check for - * symbol first to avoid possible crash or hang. - */ - if (xf86LoaderCheckSymbol("drmGetLibVersion")) { - version = drmGetLibVersion(info->drmFD); - } else { - /* drmlib version 1.0.0 didn't have the drmGetLibVersion - * entry point. Fake it by allocating a version record - * via drmGetVersion and changing it to version 1.0.0. - */ - version = drmGetVersion(info->drmFD); - version->version_major = 1; - version->version_minor = 0; - version->version_patchlevel = 0; - } - - if (version) { - if (version->version_major != 1 || - version->version_minor < 1) { - /* incompatible drm library version */ - xf86DrvMsg(pScreen->myNum, X_ERROR, - "[dri] RADEONDRIScreenInit failed because of a " - "version mismatch.\n" - "[dri] libdrm.a module version is %d.%d.%d but " - "version 1.1.x is needed.\n" - "[dri] Disabling DRI.\n", - version->version_major, - version->version_minor, - version->version_patchlevel); - drmFreeVersion(version); - RADEONDRICloseScreen(pScreen); - return FALSE; - } - drmFreeVersion(version); - } - - /* Check the radeon DRM version */ - version = drmGetVersion(info->drmFD); - if (version) { - int req_minor, req_patch; - - if (info->IsIGP) { - req_minor = 10; - req_patch = 0; - } else if (info->ChipFamily >= CHIP_FAMILY_R300) { - req_minor = 17; - req_patch = 0; - } else if (info->ChipFamily >= CHIP_FAMILY_R200) { - req_minor = 5; - req_patch = 0; - } else { -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - req_minor = 1; - req_patch = 0; -#else - req_minor = 2; - req_patch = 1; -#endif - } - - if (version->version_major != 1 || - version->version_minor < req_minor || - (version->version_minor == req_minor && - version->version_patchlevel < req_patch)) { - /* Incompatible drm version */ - xf86DrvMsg(pScreen->myNum, X_ERROR, - "[dri] RADEONDRIScreenInit failed because of a version " - "mismatch.\n" - "[dri] radeon.o kernel module version is %d.%d.%d " - "but version 1.%d.%d or newer is needed.\n" - "[dri] Disabling DRI.\n", - version->version_major, - version->version_minor, - version->version_patchlevel, - req_minor, - req_patch); - drmFreeVersion(version); - RADEONDRICloseScreen(pScreen); - return FALSE; - } - - if (version->version_minor < 3) { - xf86DrvMsg(pScreen->myNum, X_WARNING, - "[dri] Some DRI features disabled because of version " - "mismatch.\n" - "[dri] radeon.o kernel module version is %d.%d.%d but " - "1.3.1 or later is preferred.\n", - version->version_major, - version->version_minor, - version->version_patchlevel); - } - info->drmMinor = version->version_minor; - - if (info->allowColorTiling && version->version_minor < 14) { - xf86DrvMsg(pScreen->myNum, X_WARNING, - "[dri] color tiling disabled because of version " - "mismatch.\n" - "[dri] radeon.o kernel module version is %d.%d.%d but " - "1.14.0 or later is required for color tiling.\n", - version->version_major, - version->version_minor, - version->version_patchlevel); - info->allowColorTiling = FALSE; - info->tilingEnabled = FALSE; - /* try to fix up already set mode, crt pitch, ddx major (hope that's ok to do here) */ - /* is this correct scrnIndex? flags? */ - RADEONSwitchMode(pScrn->scrnIndex, pScrn->currentMode, 0); - pScrn->AdjustFrame(pScrn->scrnIndex, pScrn->frameX0, pScrn->frameY0, 0); - pDRIInfo->ddxDriverMajorVersion = RADEON_VERSION_MAJOR; - } - drmFreeVersion(version); - } - /* Initialize AGP */ if (info->cardType==CARD_AGP && !RADEONDRIAgpInit(info, pScreen)) { xf86DrvMsg(pScreen->myNum, X_ERROR, @@ -1516,6 +1511,17 @@ return TRUE; } +static Bool RADEONDRIDoCloseScreen(int scrnIndex, ScreenPtr pScreen) +{ + ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; + RADEONInfoPtr info = RADEONPTR(pScrn); + + RADEONDRICloseScreen(pScreen); + + pScreen->CloseScreen = info->DRICloseScreen; + return (*pScreen->CloseScreen)(scrnIndex, pScreen); +} + /* Finish initializing the device-dependent DRI state, and call * DRIFinishScreenInit() to complete the device-independent DRI * initialization. @@ -1604,14 +1610,34 @@ pRADEONDRI->perctx_sarea_size = info->perctx_sarea_size; #endif - /* Have shadowfb run only while there is 3d active. */ - if (!info->useEXA && info->allowPageFlip /* && info->drmMinor >= 3 */) { - ShadowFBInit( pScreen, RADEONDRIRefreshArea ); + info->directRenderingInited = TRUE; + + /* Wrap CloseScreen */ + info->DRICloseScreen = pScreen->CloseScreen; + pScreen->CloseScreen = RADEONDRIDoCloseScreen; + + return TRUE; +} + +void RADEONDRIInitPageFlip(ScreenPtr pScreen) +{ + ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; + RADEONInfoPtr info = RADEONPTR(pScrn); + + /* Have shadowfb run only while there is 3d active. This must happen late, + * after XAAInit has been called + */ + if (!info->useEXA) { + if (!ShadowFBInit( pScreen, RADEONDRIRefreshArea )) { + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "ShadowFB init failed, Page Flipping disabled\n"); + info->allowPageFlip = 0; + } else + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "ShadowFB initialized for Page Flipping\n"); } else { info->allowPageFlip = 0; } - - return TRUE; } /** @@ -1626,7 +1652,7 @@ ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; RADEONInfoPtr info = RADEONPTR(pScrn); - if (info->drmMinor >= 9) { + if (info->pKernelDRMVersion->version_minor >= 9) { xf86DrvMsg(pScreen->myNum, X_INFO, "[RESUME] Attempting to re-init Radeon hardware.\n"); } else { @@ -1655,18 +1681,16 @@ RADEONDRICPInit(pScrn); } -/* The screen is being closed, so clean up any state and free any - * resources used by the DRI. - */ -void RADEONDRICloseScreen(ScreenPtr pScreen) +void RADEONDRIStop(ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; RADEONInfoPtr info = RADEONPTR(pScrn); - drmRadeonInit drmInfo; RING_LOCALS; - /* Stop the CP */ - if (info->directRenderingEnabled) { + RADEONTRACE(("RADEONDRIStop\n")); + + /* Stop the CP */ + if (info->directRenderingInited) { /* If we've generated any CP commands, we must flush them to the * kernel module now. */ @@ -1679,26 +1703,39 @@ } RADEONCP_STOP(pScrn, info); } + info->directRenderingInited = FALSE; +} + +/* The screen is being closed, so clean up any state and free any + * resources used by the DRI. + */ +void RADEONDRICloseScreen(ScreenPtr pScreen) +{ + ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; + RADEONInfoPtr info = RADEONPTR(pScrn); + drmRadeonInit drmInfo; - if (info->irq) { + RADEONTRACE(("RADEONDRICloseScreen\n")); + + if (info->irq) { drmCtlUninstHandler(info->drmFD); info->irq = 0; info->ModeReg.gen_int_cntl = 0; } - /* De-allocate vertex buffers */ + /* De-allocate vertex buffers */ if (info->buffers) { drmUnmapBufs(info->buffers); info->buffers = NULL; } - /* De-allocate all kernel resources */ + /* De-allocate all kernel resources */ memset(&drmInfo, 0, sizeof(drmRadeonInit)); drmInfo.func = DRM_RADEON_CLEANUP_CP; drmCommandWrite(info->drmFD, DRM_RADEON_CP_INIT, &drmInfo, sizeof(drmRadeonInit)); - /* De-allocate all GART resources */ + /* De-allocate all GART resources */ if (info->gartTex) { drmUnmap(info->gartTex, info->gartTexMapSize); info->gartTex = NULL; @@ -1726,10 +1763,15 @@ info->pciMemHandle = 0; } - /* De-allocate all DRI resources */ + if (info->pciGartBackup) { + xfree(info->pciGartBackup); + info->pciGartBackup = NULL; + } + + /* De-allocate all DRI resources */ DRICloseScreen(pScreen); - /* De-allocate all DRI data structures */ + /* De-allocate all DRI data structures */ if (info->pDRIInfo) { if (info->pDRIInfo->devPrivate) { xfree(info->pDRIInfo->devPrivate); @@ -1748,7 +1790,6 @@ } } - /* Use callbacks from dri.c to support pageflipping mode for a single * 3d context without need for any specific full-screen extension. * @@ -1775,6 +1816,9 @@ int i; RADEONSAREAPrivPtr pSAREAPriv = DRIGetSAREAPrivate(pScrn->pScreen); + if (!info->directRenderingInited) + return; + /* Don't want to do this when no 3d is active and pages are * right-way-round */ @@ -1784,6 +1828,10 @@ #ifdef USE_XAA /* XXX: implement for EXA */ /* pretty much a hack. */ + + /* Make sure accel has been properly inited */ + if (info->accel == NULL || info->accel->SetupForScreenToScreenCopy == NULL) + return; if (info->tilingEnabled) info->dst_pitch_offset |= RADEON_DST_TILE_MACRO; (*info->accel->SetupForScreenToScreenCopy)(pScrn, @@ -1987,12 +2035,21 @@ ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; RADEONInfoPtr info = RADEONPTR(pScrn); - if (info->cardType!=CARD_PCIE || info->drmMinor<19) + if (info->cardType != CARD_PCIE || + info->pKernelDRMVersion->version_minor < 19) return; if (info->FbSecureSize==0) return; info->pciGartSize = RADEON_PCIGART_TABLE_SIZE; + + /* allocate space to back up PCIEGART table */ + info->pciGartBackup = xnfcalloc(1, info->pciGartSize); + if (info->pciGartBackup == NULL) + return; + info->pciGartOffset = (info->FbMapSize - info->FbSecureSize); + + } --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_exa.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_exa.c @@ -438,11 +438,9 @@ depth_size / 1024, info->depthOffset); } - /* Reserve approx. half of remaining offscreen memory for local - * textures. Round down to a whole number of texture regions. - */ - info->textureSize = (info->exa.card.memorySize - - info->exa.card.offScreenBase) / 2; + info->textureSize *= (info->exa.card.memorySize - + info->exa.card.offScreenBase) / 100; + l = RADEONLog2(info->textureSize / RADEON_NR_TEX_REGIONS); if (l < RADEON_LOG_TEX_GRANULARITY) l = RADEON_LOG_TEX_GRANULARITY; --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_vip.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_vip.c @@ -10,7 +10,7 @@ #include "radeon_video.h" #include "xf86.h" -#include "xf86PciInfo.h" +#include "atipciids.h" #include "generic_bus.h" #include "theatre_reg.h" --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_mm_i2c.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_mm_i2c.c @@ -8,9 +8,9 @@ #include "radeon_probe.h" #include #include "radeon_video.h" +#include "atipciids.h" #include "xf86.h" -#include "xf86PciInfo.h" /* i2c stuff */ #include "xf86i2c.h" --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_video.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_video.c @@ -13,7 +13,7 @@ #include "xf86.h" #include "dixstruct.h" -#include "xf86PciInfo.h" +#include "atipciids.h" #include "xf86fbman.h" #include @@ -928,7 +928,7 @@ dwOvGOff = ((INT32)(OvGOff * 2.0)) & 0x1fff; dwOvBOff = ((INT32)(OvBOff * 2.0)) & 0x1fff; - if(info->ChipFamily < CHIP_FAMILY_RADEON) + if(info->ChipFamily == CHIP_FAMILY_RADEON) { dwOvLuma =(((INT32)(OvLuma * 2048.0))&0x7fff)<<17; dwOvRCb = (((INT32)(OvRCb * 2048.0))&0x7fff)<<1; @@ -1115,10 +1115,10 @@ sprintf(tmp, "INSTANCE:%d", pScrn->scrnIndex); pPriv->instance_id = MAKE_ATOM(tmp); - OUTREG(RADEON_OV0_SCALE_CNTL, 0x80000000); + OUTREG(RADEON_OV0_SCALE_CNTL, RADEON_SCALER_SOFT_RESET); OUTREG(RADEON_OV0_AUTO_FLIP_CNTL, 0); /* maybe */ OUTREG(RADEON_OV0_EXCLUSIVE_HORZ, 0); - OUTREG(RADEON_OV0_FILTER_CNTL, 0x0000000f); + OUTREG(RADEON_OV0_FILTER_CNTL, RADEON_FILTER_PROGRAMMABLE_COEF); OUTREG(RADEON_OV0_KEY_CNTL, RADEON_GRAPHIC_KEY_FN_EQ | RADEON_VIDEO_KEY_FN_FALSE | RADEON_CMP_MIX_OR); @@ -2533,12 +2533,17 @@ /* the only place it is documented in is in ATI source code */ /* we need twice as much space for 4 tap filtering.. */ /* under special circumstances turn on 4 tap filtering */ - if(!is_rgb && (step_by_y==1) && (step_by_uv==1) && (h_inc < (1<<12)) && (deinterlacing_method!=METHOD_WEAVE) + /* disable this code for now as it has a DISASTROUS effect on image quality when upscaling + at least on rv250 (only as long as the drw_w*2 <=... requirement is still met of course) */ +#if 0 + if(!is_rgb && (step_by_y==1) && (step_by_uv==1) && (h_inc < (1<<12)) + && (deinterlacing_method!=METHOD_WEAVE) && (drw_w*2 <= pPriv->overlay_scaler_buffer_width)){ step_by_y=0; step_by_uv=1; h_inc_uv = h_inc; } +#endif /* keep everything in 16.16 */ @@ -2569,22 +2574,11 @@ left = (left >> 16) & 7; RADEONWaitForFifo(pScrn, 2); - OUTREG(RADEON_OV0_REG_LOAD_CNTL, 1); + OUTREG(RADEON_OV0_REG_LOAD_CNTL, RADEON_REG_LD_CTL_LOCK); if (info->accelOn) RADEON_SYNC(info, pScrn); - while(!(INREG(RADEON_OV0_REG_LOAD_CNTL) & (1 << 3))); + while(!(INREG(RADEON_OV0_REG_LOAD_CNTL) & RADEON_REG_LD_CTL_LOCK_READBACK)); - dsr=(double)(1<<0xC)/h_inc; - if(dsr<0.25)dsr=0.25; - if(dsr>1.0)dsr=1.0; - tap_set=(int)((dsr-0.25)*100); - for(i=0;i<5;i++){ - OUTREG(RADEON_OV0_FOUR_TAP_COEF_0+i*4, (TapCoeffs[tap_set].coeff[i][0] &0xf) | - ((TapCoeffs[tap_set].coeff[i][1] &0x7f)<<8) | - ((TapCoeffs[tap_set].coeff[i][2] &0x7f)<<16) | - ((TapCoeffs[tap_set].coeff[i][3] &0xf)<<24)); - } - - RADEONWaitForFifo(pScrn, 14); + RADEONWaitForFifo(pScrn, 10); OUTREG(RADEON_OV0_H_INC, h_inc | ((h_inc_uv >> 1) << 16)); OUTREG(RADEON_OV0_STEP_BY, step_by_y | (step_by_uv << 8)); @@ -2623,7 +2617,7 @@ ((dstBox->y1*y_mult) << 16))); OUTREG(RADEON_OV1_Y_X_END, ((dstBox->x2 + x_off) | ((dstBox->y2*y_mult) << 16))); - scaler_src = (1 << 14); + scaler_src = RADEON_SCALER_CRTC_SEL; } else { OUTREG(RADEON_OV0_Y_X_START, ((dstBox->x1 + x_off) | (((dstBox->y1*y_mult) + y_off) << 16))); @@ -2632,7 +2626,9 @@ scaler_src = 0; } - + /* program the tap coefficients for better downscaling quality. + Could do slightly better by using hardcoded coefficients for one axis + in case only the other axis is downscaled (see RADEON_OV0_FILTER_CNTL) */ dsr=(double)(1<<0xC)/h_inc; if(dsr<0.25)dsr=0.25; if(dsr>1.0)dsr=1.0; @@ -2669,31 +2665,26 @@ | RADEON_SCALER_ENABLE | RADEON_SCALER_SMART_SWITCH | (0x7f<<16) | scaler_src; switch(id){ case FOURCC_UYVY: - OUTREG(RADEON_OV0_SCALE_CNTL, RADEON_SCALER_SOURCE_YVYU422 | scale_cntl); - break; + scale_cntl |= RADEON_SCALER_SOURCE_YVYU422; case FOURCC_RGB24: case FOURCC_RGBA32: - OUTREG(RADEON_OV0_SCALE_CNTL, RADEON_SCALER_SOURCE_32BPP | scale_cntl | 0x10000000); - break; - case FOURCC_RGBT16: - OUTREG(RADEON_OV0_SCALE_CNTL, RADEON_SCALER_SOURCE_16BPP - | 0x10000000 - | scale_cntl); - break; + scale_cntl |= RADEON_SCALER_SOURCE_32BPP | RADEON_SCALER_LIN_TRANS_BYPASS; + break; case FOURCC_RGB16: - OUTREG(RADEON_OV0_SCALE_CNTL, RADEON_SCALER_SOURCE_16BPP - | 0x10000000 - | scale_cntl); - break; + scale_cntl |= RADEON_SCALER_SOURCE_16BPP | RADEON_SCALER_LIN_TRANS_BYPASS; + break; + case FOURCC_RGBT16: + scale_cntl |= RADEON_SCALER_SOURCE_15BPP | RADEON_SCALER_LIN_TRANS_BYPASS; + break; case FOURCC_YUY2: case FOURCC_YV12: case FOURCC_I420: default: - OUTREG(RADEON_OV0_SCALE_CNTL, RADEON_SCALER_SOURCE_VYUY422 - | ((info->ChipFamily>=CHIP_FAMILY_R200) ? RADEON_SCALER_TEMPORAL_DEINT :0) - | scale_cntl); - } - + scale_cntl |= RADEON_SCALER_SOURCE_VYUY422 + | ((info->ChipFamily >= CHIP_FAMILY_R200) ? RADEON_SCALER_TEMPORAL_DEINT : 0); + break; + } + OUTREG(RADEON_OV0_SCALE_CNTL, scale_cntl); OUTREG(RADEON_OV0_REG_LOAD_CNTL, 0); } @@ -2783,11 +2774,8 @@ dstPitch=(width*4+0x0f)&(~0x0f); srcPitch=width*4; break; - case FOURCC_RGBT16: - dstPitch=(width*2+0x0f)&(~0x0f); - srcPitch=(width*2+3)&(~0x03); - break; case FOURCC_RGB16: + case FOURCC_RGBT16: dstPitch=(width*2+0x0f)&(~0x0f); srcPitch=(width*2+3)&(~0x03); break; --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_driver.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_driver.c @@ -1,4 +1,5 @@ /* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_driver.c,v 1.117 2004/02/19 22:38:12 tsi Exp $ */ +/* $XdotOrg: driver/xf86-video-ati/src/radeon_driver.c,v 1.92.2.17 2006-04-24 07:46:37 benh Exp $ */ /* * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and * VA Linux Systems Inc., Fremont, California. @@ -90,7 +91,6 @@ /* X and server generic header files */ #include "xf86.h" #include "xf86_OSproc.h" -#include "xf86PciInfo.h" #include "xf86RAC.h" #include "xf86Resources.h" #include "xf86cmap.h" @@ -105,6 +105,7 @@ #define DPMS_SERVER #include +#include "atipciids.h" #include "radeon_chipset.h" #ifndef MAX @@ -129,6 +130,8 @@ static int RADEONValidateMergeModes(ScrnInfoPtr pScrn); static void RADEONSetDynamicClock(ScrnInfoPtr pScrn, int mode); static void RADEONUpdatePanelSize(ScrnInfoPtr pScrn); +static void RADEONSaveMemMapRegisters(ScrnInfoPtr pScrn, RADEONSavePtr save); +static void RADEONAdjustMemMapRegisters(ScrnInfoPtr pScrn, RADEONSavePtr save); /* psuedo xinerama support */ @@ -153,6 +156,7 @@ OPTION_PAGE_FLIP, OPTION_NO_BACKBUFFER, OPTION_XV_DMA, + OPTION_FBTEX_PERCENT, #endif OPTION_PANEL_OFF, OPTION_DDC_MODE, @@ -215,6 +219,7 @@ { OPTION_PAGE_FLIP, "EnablePageFlip", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_NO_BACKBUFFER, "NoBackBuffer", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_XV_DMA, "DMAForXv", OPTV_BOOLEAN, {0}, FALSE }, + { OPTION_FBTEX_PERCENT, "FBTexPercent", OPTV_INTEGER, {0}, FALSE }, #endif { OPTION_PANEL_OFF, "PanelOff", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_DDC_MODE, "DDCMode", OPTV_BOOLEAN, {0}, FALSE }, @@ -519,6 +524,8 @@ {{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RV350*/ {{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RV380*/ {{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_R420*/ + {{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RV410*/ /* FIXME: just values from r420 used... */ + {{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RS400*/ /* FIXME: just values from rv380 used... */ }; #ifdef XFree86LOADER @@ -732,6 +739,7 @@ if (info->FBDev) { info->FB = fbdevHWMapVidmem(pScrn); } else { + RADEONTRACE(("Map: 0x%08x, 0x%08x\n", info->LinearAddr, info->FbMapSize)); info->FB = xf86MapPciMem(pScrn->scrnIndex, VIDMEM_FRAMEBUFFER, info->PciTag, @@ -862,8 +870,14 @@ { RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; + CARD32 crtc_gen_cntl; int i; + crtc_gen_cntl = INREG(RADEON_CRTC_GEN_CNTL); + if ((crtc_gen_cntl & RADEON_CRTC_DISP_REQ_EN_B) || + !(crtc_gen_cntl & RADEON_CRTC_EN)) + return; + /* Clear the CRTC_VBLANK_SAVE bit */ OUTREG(RADEON_CRTC_STATUS, RADEON_CRTC_VBLANK_SAVE_CLEAR); @@ -879,7 +893,13 @@ { RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; + CARD32 crtc2_gen_cntl; int i; + + crtc2_gen_cntl = INREG(RADEON_CRTC2_GEN_CNTL); + if ((crtc2_gen_cntl & RADEON_CRTC2_DISP_REQ_EN_B) || + !(crtc2_gen_cntl & RADEON_CRTC2_EN)) + return; /* Clear the CRTC2_VBLANK_SAVE bit */ OUTREG(RADEON_CRTC2_STATUS, RADEON_CRTC2_VBLANK_SAVE_CLEAR); @@ -1697,7 +1717,7 @@ "Video BIOS not detected, using default clock settings!\n"); /* Default min/max PLL values */ - if (info->ChipFamily == CHIP_FAMILY_R420) { + if (info->ChipFamily == CHIP_FAMILY_R420 || info->ChipFamily == CHIP_FAMILY_RV410) { pll->min_pll_freq = 20000; pll->max_pll_freq = 50000; } else { @@ -1720,6 +1740,15 @@ info->mclk = 200.00; } + if (info->ChipFamily == CHIP_FAMILY_RV100 && !info->HasCRTC2) { + /* Avoid RN50 corruption due to memory bandwidth starvation. + * 18 is an empirical value based on the databook and Windows driver. + */ + pll->max_pll_freq = min(pll->max_pll_freq, + 18 * info->mclk * 100 / pScrn->bitsPerPixel * + info->RamWidth / 16); + } + xf86DrvMsg (pScrn->scrnIndex, X_INFO, "PLL parameters: rf=%d rd=%d min=%ld max=%ld; xclk=%d\n", pll->reference_freq, @@ -2252,83 +2281,89 @@ return TRUE; } -/* Set up MC_FB_LOCATION and related registers */ -static void -RADEONSetFBLocation(ScrnInfoPtr pScrn) +static void RADEONInitMemMapRegisters(ScrnInfoPtr pScrn, RADEONSavePtr save, + RADEONInfoPtr info) { - RADEONInfoPtr info = RADEONPTR(pScrn); - RADEONEntPtr pRADEONEnt = RADEONEntPriv(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - CARD32 mc_fb_location; - CARD32 mc_agp_location = INREG(RADEON_MC_AGP_LOCATION); - CARD32 bus_cntl = INREG(RADEON_BUS_CNTL); - - OUTREG (RADEON_BUS_CNTL, bus_cntl | RADEON_BUS_MASTER_DIS); - RADEONWaitForIdleMMIO(pScrn); - - /* This function has many problems with newer cards. - * Even with older cards, all registers changed here are not - * restored properly when X quits, this will also cause - * various problems, especially with radeonfb. - * Since we don't have DRI support for R300 and above cards, - * we just hardcode these values for now. - * Need to revisit this whole function!!! - */ + save->mc_fb_location = info->mc_fb_location; + save->mc_agp_location = info->mc_agp_location; + save->display_base_addr = info->fbLocation; + save->display2_base_addr = info->fbLocation; + save->ov0_base_addr = info->fbLocation; +} - if (info->IsIGP) { - mc_fb_location = INREG(RADEON_NB_TOM); +static void RADEONInitMemoryMap(ScrnInfoPtr pScrn) +{ + RADEONInfoPtr info = RADEONPTR(pScrn); + unsigned char *RADEONMMIO = info->MMIO; + unsigned long agp_size, agp_base, mem_size; - OUTREG(RADEON_GRPH2_BUFFER_CNTL, - INREG(RADEON_GRPH2_BUFFER_CNTL) & ~0x7f0000); + /* Default to existing values */ + info->mc_fb_location = INREG(RADEON_MC_FB_LOCATION); + info->mc_agp_location = INREG(RADEON_MC_AGP_LOCATION); + + /* We shouldn't use info->videoRam here which might have been clipped + * but the real video RAM instead + */ + mem_size = INREG(RADEON_CONFIG_MEMSIZE); + if (mem_size == 0) + mem_size = 0x800000; - } else #ifdef XF86DRI - if ( info->directRenderingEnabled && info->drmMinor < 10 ) { - mc_fb_location = (INREG(RADEON_CONFIG_APER_SIZE) - 1) & 0xffff0000U; - } else -#endif - { - CARD32 aper0_base = INREG(RADEON_CONFIG_APER_0_BASE); - - mc_fb_location = (aper0_base >> 16) - | ((aper0_base + (INREG(RADEON_CONFIG_APER_SIZE) - 1) - ) & 0xffff0000U); + /* Apply memory map limitation if using an old DRI */ + if (info->directRenderingEnabled && !info->newMemoryMap) { + CARD32 aper_size = INREG(RADEON_CONFIG_APER_SIZE); + if (aper_size < mem_size) + mem_size = aper_size; } +#endif - info->fbLocation = (mc_fb_location & 0xffff) << 16; - - if (((mc_agp_location & 0xffff) << 16) != - ((mc_fb_location & 0xffff0000U) + 0x10000)) { - mc_agp_location = mc_fb_location & 0xffff0000U; - mc_agp_location |= (mc_agp_location + 0x10000) >> 16; - } - - RADEONWaitForIdleMMIO(pScrn); - - OUTREG(RADEON_MC_FB_LOCATION, mc_fb_location); - OUTREG(RADEON_MC_AGP_LOCATION, mc_agp_location); - OUTREG(RADEON_DISPLAY_BASE_ADDR, info->fbLocation); - if (info->HasCRTC2) - OUTREG(RADEON_DISPLAY2_BASE_ADDR, info->fbLocation); - OUTREG(RADEON_OV0_BASE_ADDR, info->fbLocation); - - OUTREG (RADEON_BUS_CNTL, bus_cntl); - RADEONWaitForIdleMMIO(pScrn); - - /* Set display0/1 priority up on r3/4xx in the memory controller for - * high res modes if the user specifies HIGH for displaypriority - * option. - */ - if ((info->DispPriority == 2) && IS_R300_VARIANT) { - CARD32 mc_init_misc_lat_timer = INREG(R300_MC_INIT_MISC_LAT_TIMER); - if (info->MergedFB || pRADEONEnt->HasSecondary) { - mc_init_misc_lat_timer |= 0x1100; /* display 0 and 1 */ - } else { - mc_init_misc_lat_timer |= 0x0100; /* display 0 only */ - } - OUTREG(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer); - } + /* We won't try to change MC_FB_LOCATION when using fbdev */ + if (!info->FBDev) { + if (info->IsIGP) + info->mc_fb_location = INREG(RADEON_NB_TOM); + else +#ifdef XF86DRI + /* Old DRI has restrictions on the memory map */ + if ( info->directRenderingEnabled && + info->pKernelDRMVersion->version_minor < 10 ) + info->mc_fb_location = (mem_size - 1) & 0xffff0000U; + else +#endif + { + CARD32 aper0_base = INREG(RADEON_CONFIG_APER_0_BASE); + /* Recent chips have an "issue" with the memory controller, the + * location must be aligned to the size. We just align it down, + * too bad if we walk over the top of system memory, we don't + * use DMA without a remapped anyway. + * Affected chips are rv280, all r3xx, and all r4xx, but not IGP + */ + if (info->ChipFamily == CHIP_FAMILY_RV280 || + info->ChipFamily == CHIP_FAMILY_R300 || + info->ChipFamily == CHIP_FAMILY_R350 || + info->ChipFamily == CHIP_FAMILY_RV350 || + info->ChipFamily == CHIP_FAMILY_RV380 || + info->ChipFamily == CHIP_FAMILY_R420 || + info->ChipFamily == CHIP_FAMILY_RV410) + aper0_base &= ~(mem_size - 1); + + info->mc_fb_location = (aper0_base >> 16) | + ((aper0_base + mem_size - 1) & 0xffff0000U); + } + } + info->fbLocation = (info->mc_fb_location & 0xffff) << 16; + + /* Just disable the damn AGP apertures for now, it may be + * re-enabled later by the DRM + */ + info->mc_agp_location = 0xffffffc0; + + RADEONTRACE(("RADEONInitMemoryMap() : \n")); + RADEONTRACE((" mem_size : 0x%08lx\n", mem_size)); + RADEONTRACE((" agp_size : 0x%08lx\n", agp_size)); + RADEONTRACE((" agp_base : 0x%08lx\n", agp_base)); + RADEONTRACE((" MC_FB_LOCATION : 0x%08lx\n", info->mc_fb_location)); + RADEONTRACE((" MC_AGP_LOCATION : 0x%08lx\n", info->mc_agp_location)); } static void RADEONGetVRamType(ScrnInfoPtr pScrn) @@ -2357,6 +2392,10 @@ (info->ChipFamily == CHIP_FAMILY_RS200)){ if (tmp & RV100_HALF_MODE) info->RamWidth = 32; else info->RamWidth = 64; + if (!info->HasCRTC2) { + info->RamWidth /= 4; + info->IsDDR = TRUE; + } } else { if (tmp & RADEON_MEM_NUM_CHANNELS_MASK) info->RamWidth = 128; else info->RamWidth = 64; @@ -2367,23 +2406,193 @@ */ } +/* + * Depending on card genertation, chipset bugs, etc... the amount of vram + * accessible to the CPU can vary. This function is our best shot at figuring + * it out. Returns a value in KB. + */ +static CARD32 RADEONGetAccessibleVRAM(ScrnInfoPtr pScrn) +{ + RADEONInfoPtr info = RADEONPTR(pScrn); + EntityInfoPtr pEnt = info->pEnt; + GDevPtr dev = pEnt->device; + MessageType from; + unsigned char *RADEONMMIO = info->MMIO; + CARD32 aper_size = INREG(RADEON_CONFIG_APER_SIZE) / 1024; + +#ifdef XF86DRI + /* If we use the DRI, we need to check if it's a version that has the + * bug of always cropping MC_FB_LOCATION to one aperture, in which case + * we need to limit the amount of accessible video memory + */ + if (info->directRenderingEnabled && + info->pKernelDRMVersion->version_minor < 23) { + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + "[dri] limiting video memory to one aperture of %dK\n", + aper_size); + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + "[dri] detected radeon kernel module version 1.%d but" + " 1.23 or newer is required for full memory mapping.\n", + info->pKernelDRMVersion->version_minor); + info->newMemoryMap = FALSE; + return aper_size; + } + info->newMemoryMap = TRUE; +#endif /* XF86DRI */ + + /* Set HDP_APER_CNTL only on cards that are known not to be broken, + * that is has the 2nd generation multifunction PCI interface + */ + if (info->ChipFamily == CHIP_FAMILY_RV280 || + info->ChipFamily == CHIP_FAMILY_RV350 || + info->ChipFamily == CHIP_FAMILY_RV380 || + info->ChipFamily == CHIP_FAMILY_R420 || + info->ChipFamily == CHIP_FAMILY_RV410) { + OUTREGP (RADEON_HOST_PATH_CNTL, RADEON_HDP_APER_CNTL, + ~RADEON_HDP_APER_CNTL); + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Generation 2 PCI interface, using max accessible memory\n"); + return aper_size * 2; + } + + /* Older cards have all sorts of funny issues to deal with. First + * check if it's a multifunction card by reading the PCI config + * header type... Limit those to one aperture size + */ + if (pciReadByte(info->PciTag, 0xe) & 0x80) { + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Generation 1 PCI interface in multifunction mode" + ", accessible memory limited to one aperture\n"); + return aper_size; + } + + /* Single function older card. We read HDP_APER_CNTL to see how the BIOS + * have set it up. We don't write this as it's broken on some ASICs but + * we expect the BIOS to have done the right thing (might be too optimistic...) + */ + if (INREG(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL) + return aper_size * 2; + + return aper_size; +} + +static Bool RADEONPreInitVRAM(ScrnInfoPtr pScrn) +{ + RADEONInfoPtr info = RADEONPTR(pScrn); + EntityInfoPtr pEnt = info->pEnt; + GDevPtr dev = pEnt->device; + unsigned char *RADEONMMIO = info->MMIO; + MessageType from = X_PROBED; + + if (info->FBDev) + pScrn->videoRam = fbdevHWGetVidmem(pScrn) / 1024; + else if ((info->ChipFamily == CHIP_FAMILY_RS100) || + (info->ChipFamily == CHIP_FAMILY_RS200) || + (info->ChipFamily == CHIP_FAMILY_RS300)) { + CARD32 tom = INREG(RADEON_NB_TOM); + + pScrn->videoRam = (((tom >> 16) - + (tom & 0xffff) + 1) << 6); + + OUTREG(RADEON_CONFIG_MEMSIZE, pScrn->videoRam * 1024); + } else { + CARD32 accessible; + CARD32 bar_size; + + /* Read VRAM size from card */ + pScrn->videoRam = INREG(RADEON_CONFIG_MEMSIZE) / 1024; + + /* Some production boards of m6 will return 0 if it's 8 MB */ + if (pScrn->videoRam == 0) { + pScrn->videoRam = 8192; + OUTREG(RADEON_CONFIG_MEMSIZE, 0x800000); + } + + /* Get accessible memory */ + accessible = RADEONGetAccessibleVRAM(pScrn); + + /* Crop it to the size of the PCI BAR */ + bar_size = (1ul << info->PciInfo->size[0]) / 1024; + if (bar_size == 0) + bar_size = 0x20000; + if (accessible > bar_size) + accessible = bar_size; + + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Detected total video RAM=%dK, accessible=%dK " + "(PCI BAR=%dK)\n", + pScrn->videoRam, accessible, bar_size); + if (pScrn->videoRam > accessible) + pScrn->videoRam = accessible; + } + + info->MemCntl = INREG(RADEON_SDRAM_MODE_REG); + info->BusCntl = INREG(RADEON_BUS_CNTL); + + RADEONGetVRamType(pScrn); + + if (dev->videoRam) { + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Video RAM override, using %d kB instead of %d kB\n", + dev->videoRam, + pScrn->videoRam); + from = X_CONFIG; + pScrn->videoRam = dev->videoRam; + } + + xf86DrvMsg(pScrn->scrnIndex, from, + "Mapped VideoRAM: %d kByte (%d bit %s SDRAM)\n", pScrn->videoRam, info->RamWidth, info->IsDDR?"DDR":"SDR"); + + /* FIXME: For now, split FB into two equal sections. This should + * be able to be adjusted by user with a config option. */ + if (info->IsPrimary) { + pScrn->videoRam /= 2; + info->MergedFB = FALSE; + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Using %dk of videoram for primary head\n", + pScrn->videoRam); + } + + if (info->IsSecondary) { + pScrn->videoRam /= 2; + info->LinearAddr += pScrn->videoRam * 1024; + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Using %dk of videoram for secondary head\n", + pScrn->videoRam); + } + + pScrn->videoRam &= ~1023; + info->FbMapSize = pScrn->videoRam * 1024; + + /* if the card is PCI Express reserve the last 32k for the gart table */ +#ifdef XF86DRI + if (info->cardType == CARD_PCIE && info->directRenderingEnabled) + info->FbSecureSize = RADEON_PCIGART_TABLE_SIZE; + else +#endif + info->FbSecureSize = 0; + + return TRUE; +} + + /* This is called by RADEONPreInit to handle config file overrides for * things like chipset and memory regions. Also determine memory size * and type. If memory type ever needs an override, put it in this * routine. */ -static Bool RADEONPreInitConfig(ScrnInfoPtr pScrn) +static Bool RADEONPreInitChipType(ScrnInfoPtr pScrn) { RADEONInfoPtr info = RADEONPTR(pScrn); EntityInfoPtr pEnt = info->pEnt; GDevPtr dev = pEnt->device; - MessageType from; unsigned char *RADEONMMIO = info->MMIO; + MessageType from = X_PROBED; #ifdef XF86DRI const char *s; #endif - /* Chipset */ + /* Chipset */ from = X_PROBED; if (dev->chipset && *dev->chipset) { info->Chipset = xf86StringToToken(RADEONChipsets, dev->chipset); @@ -2423,10 +2632,11 @@ info->ChipFamily = CHIP_FAMILY_RV100; break; - case PCI_CHIP_RV100_QY: - case PCI_CHIP_RV100_QZ: case PCI_CHIP_RN50_515E: /* RN50 is based on the RV100 but 3D isn't guaranteed to work. YMMV. */ case PCI_CHIP_RN50_5969: + info->HasCRTC2 = FALSE; + case PCI_CHIP_RV100_QY: + case PCI_CHIP_RV100_QZ: info->ChipFamily = CHIP_FAMILY_RV100; /* DELL triple-head configuration. */ @@ -2554,6 +2764,7 @@ break; case PCI_CHIP_RV380_3150: + case PCI_CHIP_RV380_3152: case PCI_CHIP_RV380_3154: info->IsMobility = TRUE; case PCI_CHIP_RV380_3E50: @@ -2562,10 +2773,12 @@ break; case PCI_CHIP_RV370_5460: + case PCI_CHIP_RV370_5462: case PCI_CHIP_RV370_5464: info->IsMobility = TRUE; case PCI_CHIP_RV370_5B60: case PCI_CHIP_RV370_5B62: + case PCI_CHIP_RV370_5B63: case PCI_CHIP_RV370_5B64: case PCI_CHIP_RV370_5B65: info->ChipFamily = CHIP_FAMILY_RV380; @@ -2580,13 +2793,14 @@ case PCI_CHIP_RC410_5A61: case PCI_CHIP_RS480_5954: case PCI_CHIP_RS482_5974: - info->ChipFamily = CHIP_FAMILY_RV380; /*CHIP_FAMILY_RS400*/ - /*info->IsIGP = TRUE;*/ /* ??? */ + info->ChipFamily = CHIP_FAMILY_RS400; + info->IsIGP = TRUE; /*info->HasSingleDAC = TRUE;*/ /* ??? */ break; case PCI_CHIP_RV410_564A: case PCI_CHIP_RV410_564B: + case PCI_CHIP_RV410_564F: case PCI_CHIP_RV410_5652: case PCI_CHIP_RV410_5653: info->IsMobility = TRUE; @@ -2596,7 +2810,7 @@ case PCI_CHIP_RV410_5E4D: case PCI_CHIP_RV410_5E4C: case PCI_CHIP_RV410_5E4F: - info->ChipFamily = CHIP_FAMILY_R420; /* CHIP_FAMILY_RV410*/ + info->ChipFamily = CHIP_FAMILY_RV410; break; case PCI_CHIP_R420_JN: @@ -2654,7 +2868,6 @@ info->HasCRTC2 = FALSE; } - /* Framebuffer */ from = X_PROBED; info->LinearAddr = info->PciInfo->memBase[0] & 0xfe000000; @@ -2691,36 +2904,6 @@ } /* Read registers used to determine options */ - from = X_PROBED; - if (info->FBDev) - pScrn->videoRam = fbdevHWGetVidmem(pScrn) / 1024; - else if ((info->ChipFamily == CHIP_FAMILY_RS100) || - (info->ChipFamily == CHIP_FAMILY_RS200) || - (info->ChipFamily == CHIP_FAMILY_RS300)) { - CARD32 tom = INREG(RADEON_NB_TOM); - - pScrn->videoRam = (((tom >> 16) - - (tom & 0xffff) + 1) << 6); - - OUTREG(RADEON_CONFIG_MEMSIZE, pScrn->videoRam * 1024); - } else { - /* There are different HDP mapping schemes depending on single/multi funciton setting, - * chip family, HDP mode, and the generation of HDP mapping scheme. - * To make things simple, we only allow maximum 128M addressable FB. Anything more than - * 128M is configured as invisible FB to CPU that can only be accessed from chip side. - */ - pScrn->videoRam = INREG(RADEON_CONFIG_MEMSIZE) / 1024; - if (pScrn->videoRam > 128*1024) pScrn->videoRam = 128*1024; - if ((info->ChipFamily == CHIP_FAMILY_RV350) || - (info->ChipFamily == CHIP_FAMILY_RV380) || - (info->ChipFamily == CHIP_FAMILY_R420)) { - OUTREGP (RADEON_HOST_PATH_CNTL, (1<<23), ~(1<<23)); - } - } - - /* Some production boards of m6 will return 0 if it's 8 MB */ - if (pScrn->videoRam == 0) pScrn->videoRam = 8192; - /* Check chip errata */ info->ChipErrata = 0; @@ -2738,46 +2921,6 @@ info->ChipFamily == CHIP_FAMILY_RS200) info->ChipErrata |= CHIP_ERRATA_PLL_DELAY; - info->MemCntl = INREG(RADEON_SDRAM_MODE_REG); - info->BusCntl = INREG(RADEON_BUS_CNTL); - - RADEONGetVRamType(pScrn); - - if (dev->videoRam) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Video RAM override, using %d kB instead of %d kB\n", - dev->videoRam, - pScrn->videoRam); - from = X_CONFIG; - pScrn->videoRam = dev->videoRam; - } - - xf86DrvMsg(pScrn->scrnIndex, from, - "VideoRAM: %d kByte (%d bit %s SDRAM)\n", pScrn->videoRam, info->RamWidth, info->IsDDR?"DDR":"SDR"); - - /* FIXME: For now, split FB into two equal sections. This should - * be able to be adjusted by user with a config option. */ - if (info->IsPrimary) { - pScrn->videoRam /= 2; - info->MergedFB = FALSE; - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Using %dk of videoram for primary head\n", - pScrn->videoRam); - } - - if (info->IsSecondary) { - pScrn->videoRam /= 2; - info->LinearAddr += pScrn->videoRam * 1024; - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Using %dk of videoram for secondary head\n", - pScrn->videoRam); - } - - pScrn->videoRam &= ~1023; - info->FbMapSize = pScrn->videoRam * 1024; - - info->FbSecureSize = 0; - #ifdef XF86DRI /* AGP/PCI */ /* Proper autodetection of an AGP capable device requires examining @@ -2861,10 +3004,6 @@ "Invalid BusType option, using detected type\n"); } } - - /* if the card is PCI Express reserve the last 32k for the gart table */ - if (info->cardType == CARD_PCIE) - info->FbSecureSize = RADEON_PCIGART_TABLE_SIZE; #endif xf86GetOptValBool(info->Options, OPTION_SHOWCACHE, &info->showCache); if (info->showCache) @@ -4185,6 +4324,7 @@ xfree(info->CRT2pScrn->monitor); } xfree(info->CRT2pScrn); + info->CRT2pScrn = NULL; } pScrn->modes = info->CRT1Modes; info->CRT1Modes = NULL; @@ -4338,6 +4478,44 @@ RADEONInfoPtr info = RADEONPTR(pScrn); MessageType from; + info->directRenderingEnabled = FALSE; + info->directRenderingInited = FALSE; + info->CPInUse = FALSE; + info->CPStarted = FALSE; + info->pLibDRMVersion = NULL; + info->pKernelDRMVersion = NULL; + + if (xf86IsEntityShared(info->pEnt->index)) { + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + "Direct Rendering Disabled -- " + "Dual-head configuration is not working with " + "DRI at present.\n" + "Please use the radeon MergedFB option if you " + "want Dual-head with DRI.\n"); + return FALSE; + } + if (info->IsSecondary) + return FALSE; + + if (xf86ReturnOptValBool(info->Options, OPTION_NOACCEL, FALSE)) { + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + "[dri] Acceleration disabled, not initializing the DRI\n"); + return FALSE; + } + + if (!RADEONDRIGetVersion(pScrn)) + return FALSE; + + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "[dri] Found DRI library version %d.%d.%d and kernel" + " module version %d.%d.%d\n", + info->pLibDRMVersion->version_major, + info->pLibDRMVersion->version_minor, + info->pLibDRMVersion->version_patchlevel, + info->pKernelDRMVersion->version_major, + info->pKernelDRMVersion->version_minor, + info->pKernelDRMVersion->version_patchlevel); + if (xf86ReturnOptValBool(info->Options, OPTION_CP_PIO, FALSE)) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Forcing CP into PIO mode\n"); info->CPMode = RADEON_DEFAULT_CP_PIO_MODE; @@ -4454,6 +4632,7 @@ OPTION_NO_BACKBUFFER, FALSE); +#ifdef XF86DRI if (info->noBackBuffer) { info->allowPageFlip = 0; } else if (!xf86LoadSubModule(pScrn, "shadowfb")) { @@ -4475,6 +4654,7 @@ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Page flipping %sabled\n", info->allowPageFlip ? "en" : "dis"); +#endif info->DMAForXv = TRUE; from = xf86GetOptValBool(info->Options, OPTION_XV_DMA, &info->DMAForXv) @@ -4485,26 +4665,82 @@ return TRUE; } -#endif +#endif /* XF86DRI */ -static Bool RADEONPreInitXv(ScrnInfoPtr pScrn) +static void RADEONPreInitColorTiling(ScrnInfoPtr pScrn) { RADEONInfoPtr info = RADEONPTR(pScrn); - CARD16 mm_table; - CARD16 bios_header; - CARD16 pll_info_block; - /* Rescue MM_TABLE before VBIOS is freed */ - info->MM_TABLE_valid = FALSE; - - if((info->VBIOS==NULL)||(info->VBIOS[0]!=0x55)||(info->VBIOS[1]!=0xaa)){ - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Cannot access BIOS or it is not valid.\n" - "\t\tIf your card is TV-in capable you will need to specify options RageTheatreCrystal, RageTheatreTunerPort, \n" - "\t\tRageTheatreSVideoPort and TunerType in /etc/X11/xorg.conf.\n" - ); - info->MM_TABLE_valid = FALSE; - return TRUE; - } + if (IS_R300_VARIANT) { + /* false by default on R3/4xx */ + info->allowColorTiling = xf86ReturnOptValBool(info->Options, + OPTION_COLOR_TILING, FALSE); + info->MaxSurfaceWidth = 3968; /* one would have thought 4096...*/ + info->MaxLines = 4096; + } else { + info->allowColorTiling = xf86ReturnOptValBool(info->Options, + OPTION_COLOR_TILING, TRUE); + info->MaxSurfaceWidth = 2048; + info->MaxLines = 2048; + } + + if (!info->allowColorTiling) + return; + +#ifdef XF86DRI + if (info->directRenderingEnabled && + info->pKernelDRMVersion->version_minor < 14) { + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + "[dri] color tiling disabled because of version " + "mismatch.\n" + "[dri] radeon.o kernel module version is %d.%d.%d but " + "1.14.0 or later is required for color tiling.\n", + info->pKernelDRMVersion->version_major, + info->pKernelDRMVersion->version_minor, + info->pKernelDRMVersion->version_patchlevel); + info->allowColorTiling = FALSE; + return; + } +#endif /* XF86DRI */ + + if ((info->allowColorTiling) && (info->IsSecondary)) { + /* can't have tiling on the 2nd head (as long as it can't use drm). + * We'd never get the surface save/restore (vt switching) right... + */ + xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Color tiling disabled for 2nd head\n"); + info->allowColorTiling = FALSE; + } + else if ((info->allowColorTiling) && (info->FBDev)) { + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + "Color tiling not supported with UseFBDev option\n"); + info->allowColorTiling = FALSE; + } + else if (info->allowColorTiling) { + xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Color tiling enabled by default\n"); + } else { + xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Color tiling disabled\n"); + } +} + + +static Bool RADEONPreInitXv(ScrnInfoPtr pScrn) +{ + RADEONInfoPtr info = RADEONPTR(pScrn); + CARD16 mm_table; + CARD16 bios_header; + CARD16 pll_info_block; + + /* Rescue MM_TABLE before VBIOS is freed */ + info->MM_TABLE_valid = FALSE; + + if((info->VBIOS==NULL)||(info->VBIOS[0]!=0x55)||(info->VBIOS[1]!=0xaa)){ + xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Cannot access BIOS or it is not valid.\n" + "\t\tIf your card is TV-in capable you will need to specify options RageTheatreCrystal, RageTheatreTunerPort, \n" + "\t\tRageTheatreSVideoPort and TunerType in /etc/X11/xorg.conf.\n" + ); + info->MM_TABLE_valid = FALSE; + return TRUE; + } bios_header=info->VBIOS[0x48]; bios_header+=(((int)info->VBIOS[0x49]+0)<<8); @@ -4847,38 +5083,20 @@ RADEONPostInt10Check(pScrn, int10_save); - if (!RADEONPreInitConfig(pScrn)) + if (!RADEONPreInitChipType(pScrn)) goto fail; - if (IS_R300_VARIANT) { - /* false by default on R3/4xx */ - info->allowColorTiling = xf86ReturnOptValBool(info->Options, - OPTION_COLOR_TILING, FALSE); - info->MaxSurfaceWidth = 3968; /* one would have thought 4096...*/ - info->MaxLines = 4096; - } else { - info->allowColorTiling = xf86ReturnOptValBool(info->Options, - OPTION_COLOR_TILING, TRUE); - info->MaxSurfaceWidth = 2048; - info->MaxLines = 2048; - } +#ifdef XF86DRI + /* PreInit DRI first of all since we need that for getting a proper + * memory map + */ + info->directRenderingEnabled = RADEONPreInitDRI(pScrn); +#endif - if ((info->allowColorTiling) && (info->IsSecondary)) { - /* can't have tiling on the 2nd head (as long as it can't use drm). We'd never - get the surface save/restore (vt switching) right... */ - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Color tiling disabled for 2nd head\n"); - info->allowColorTiling = FALSE; - } - else if ((info->allowColorTiling) && (info->FBDev)) { - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Color tiling not supported with UseFBDev option\n"); - info->allowColorTiling = FALSE; - } - else if (info->allowColorTiling) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Color tiling enabled by default\n"); - } else { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Color tiling disabled\n"); - } + if (!RADEONPreInitVRAM(pScrn)) + goto fail; + + RADEONPreInitColorTiling(pScrn); RADEONPreInitDDC(pScrn); @@ -4901,13 +5119,9 @@ if (!RADEONPreInitAccel(pScrn)) goto fail; -#ifdef XF86DRI - if (!RADEONPreInitDRI(pScrn)) goto fail; -#endif - if (!RADEONPreInitXv(pScrn)) goto fail; - /* Free the video bios (if applicable) */ + /* Free the video bios (if applicable) */ if (info->VBIOS) { xfree(info->VBIOS); info->VBIOS = NULL; @@ -4968,7 +5182,7 @@ unsigned char r, g, b; #ifdef XF86DRI - if (info->CPStarted) DRILock(pScrn->pScreen, 0); + if (info->CPStarted && pScrn->pScreen) DRILock(pScrn->pScreen, 0); #endif if (info->accelOn && pScrn->pScreen) @@ -5083,7 +5297,7 @@ } #ifdef XF86DRI - if (info->CPStarted) DRIUnlock(pScrn->pScreen); + if (info->CPStarted && pScrn->pScreen) DRIUnlock(pScrn->pScreen); #endif } @@ -5095,7 +5309,7 @@ RADEONInfoPtr info = RADEONPTR(pScrn); #ifdef XF86DRI - if (info->directRenderingEnabled) { + if (info->directRenderingInited) { FLUSH_RING(); } #endif @@ -5128,6 +5342,7 @@ int depthSize; int l; int scanlines; + int texsizerequest; BoxRec MemBox; FBAreaPtr fbarea; @@ -5178,18 +5393,31 @@ /* Try for front, back, depth, and three framebuffers worth of * pixmap cache. Should be enough for a fullscreen background * image plus some leftovers. - */ + * If the FBTexPercent option was used, try to achieve that percentage instead, + * but still have at least one pixmap buffer (get problems with xvideo/render + * otherwise probably), and never reserve more than 3 offscreen buffers as it's + * probably useless for XAA. + */ + if (info->textureSize >= 0) { + texsizerequest = ((int)info->FbMapSize - 2 * bufferSize - depthSize + - 2 * width_bytes - 16384 - info->FbSecureSize) + /* first divide, then multiply or we'll get an overflow (been there...) */ + / 100 * info->textureSize; + } + else { + texsizerequest = (int)info->FbMapSize / 2; + } info->textureSize = info->FbMapSize - info->FbSecureSize - 5 * bufferSize - depthSize; - /* If that gives us less than half the available memory, let's + /* If that gives us less than the requested memory, let's * be greedy and grab some more. Sorry, I care more about 3D * performance than playing nicely, and you'll get around a full * framebuffer's worth of pixmap cache anyway. */ - if (info->textureSize < (int)info->FbMapSize / 2) { + if (info->textureSize < texsizerequest) { info->textureSize = info->FbMapSize - 4 * bufferSize - depthSize; } - if (info->textureSize < (int)info->FbMapSize / 2) { + if (info->textureSize < texsizerequest) { info->textureSize = info->FbMapSize - 3 * bufferSize - depthSize; } @@ -5199,7 +5427,7 @@ */ if (info->textureSize < 0) { info->textureSize = info->FbMapSize - 2 * bufferSize - depthSize - - 2 * width_bytes - 16384 - info->FbSecureSize; + - 2 * width_bytes - 16384 - info->FbSecureSize; } /* Check to see if there is more room available after the 8192nd @@ -5448,13 +5676,8 @@ RADEONTRACE(("RADEONScreenInit %x %d\n", pScrn->memPhysBase, pScrn->fbOffset)); -#ifdef XF86DRI - /* Turn off the CP for now. */ - info->CPInUse = FALSE; - info->CPStarted = FALSE; - info->directRenderingEnabled = FALSE; -#endif info->accelOn = FALSE; + info->accel = NULL; pScrn->fbOffset = 0; if (info->IsSecondary) pScrn->fbOffset = pScrn->videoRam * 1024; if (!RADEONMapMem(pScrn)) return FALSE; @@ -5476,13 +5699,6 @@ } } -#if 0 - if (info->allowColorTiling && info->useEXA) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Color tiling not supported yet with EXA, disabling\n"); - info->allowColorTiling = FALSE; - } -#endif if (info->allowColorTiling && (pScrn->virtualX > info->MaxSurfaceWidth)) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Color tiling not supported with virtual x resolutions larger than %d, disabling\n", @@ -5503,31 +5719,7 @@ } } - if (!info->IsSecondary) { - /* empty the surfaces */ - unsigned char *RADEONMMIO = info->MMIO; - unsigned int i; - for (i = 0; i < 8; i++) { - OUTREG(RADEON_SURFACE0_INFO + 16 * i, 0); - OUTREG(RADEON_SURFACE0_LOWER_BOUND + 16 * i, 0); - OUTREG(RADEON_SURFACE0_UPPER_BOUND + 16 * i, 0); - } - } - - if (info->FBDev) { - unsigned char *RADEONMMIO = info->MMIO; - - if (!fbdevHWModeInit(pScrn, pScrn->currentMode)) return FALSE; - info->ModeReg.surface_cntl = INREG(RADEON_SURFACE_CNTL); - } else { - if (!RADEONModeInit(pScrn, pScrn->currentMode)) return FALSE; - } - - RADEONSaveScreen(pScreen, SCREEN_SAVER_ON); - - pScrn->AdjustFrame(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0); - - /* Visual setup */ + /* Visual setup */ miClearVisualTypes(); if (!miSetVisualTypes(pScrn->depth, miGetDefaultVisualMask(pScrn->depth), @@ -5536,12 +5728,10 @@ miSetPixmapDepths (); #ifdef XF86DRI - /* Setup DRI after visuals have been - established, but before fbScreenInit is - called. fbScreenInit will eventually - call the driver's InitGLXVisuals call - back. */ - { + /* Setup DRI after visuals have been established, but before fbScreenInit is + * called. fbScreenInit will eventually call the driver's InitGLXVisuals + * call back. */ + if (info->directRenderingEnabled) { /* FIXME: When we move to dynamic allocation of back and depth * buffers, we will want to revisit the following check for 3 * times the virtual size of the screen below. @@ -5550,11 +5740,7 @@ info->CurrentLayout.pixel_bytes); int maxy = info->FbMapSize / width_bytes; - if (xf86ReturnOptValBool(info->Options, OPTION_NOACCEL, FALSE)) { - xf86DrvMsg(scrnIndex, X_WARNING, - "Acceleration disabled, not initializing the DRI\n"); - info->directRenderingEnabled = FALSE; - } else if (maxy <= pScrn->virtualY * 3) { + if (maxy <= pScrn->virtualY * 3) { xf86DrvMsg(scrnIndex, X_ERROR, "Static buffer allocation failed. Disabling DRI.\n"); xf86DrvMsg(scrnIndex, X_ERROR, @@ -5572,22 +5758,63 @@ "\t*** This message has been last modified on 2005-08-07.\n\n" ); info->directRenderingEnabled = RADEONDRIScreenInit(pScreen); - } else if (info->IsSecondary) { - info->directRenderingEnabled = FALSE; - } else if (xf86IsEntityShared(info->pEnt->index)) { - /* Xinerama has sync problem with DRI, disable it for now */ - info->directRenderingEnabled = FALSE; - xf86DrvMsg(scrnIndex, X_WARNING, - "Direct Rendering Disabled -- " - "Dual-head configuration is not working with " - "DRI at present.\n" - "Please use the radeon MergedFB option if you " - "want Dual-head with DRI.\n"); } else { info->directRenderingEnabled = RADEONDRIScreenInit(pScreen); } } + /* Tell DRI about new memory map */ + if (info->directRenderingEnabled && info->newMemoryMap) { + drmRadeonSetParam radeonsetparam; + RADEONTRACE(("DRI New memory map param\n")); + memset(&radeonsetparam, 0, sizeof(drmRadeonSetParam)); + radeonsetparam.param = RADEON_SETPARAM_NEW_MEMMAP; + radeonsetparam.value = 1; + if (drmCommandWrite(info->drmFD, DRM_RADEON_SETPARAM, + &radeonsetparam, sizeof(drmRadeonSetParam)) < 0) { + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + "[drm] failed to enable new memory map\n"); + RADEONDRICloseScreen(pScreen); + info->directRenderingEnabled = FALSE; + } + } + + hasDRI = info->directRenderingEnabled; +#endif /* XF86DRI */ + + /* Initialize the memory map, this basically calculates the values + * we'll use later on for MC_FB_LOCATION & MC_AGP_LOCATION + */ + RADEONInitMemoryMap(pScrn); + + if (!info->IsSecondary) { + /* empty the surfaces */ + unsigned char *RADEONMMIO = info->MMIO; + unsigned int i; + for (i = 0; i < 8; i++) { + OUTREG(RADEON_SURFACE0_INFO + 16 * i, 0); + OUTREG(RADEON_SURFACE0_LOWER_BOUND + 16 * i, 0); + OUTREG(RADEON_SURFACE0_UPPER_BOUND + 16 * i, 0); + } + } + + if (info->FBDev) { + unsigned char *RADEONMMIO = info->MMIO; + + if (!fbdevHWModeInit(pScrn, pScrn->currentMode)) return FALSE; + RADEONSaveMemMapRegisters(pScrn, &info->ModeReg); + info->fbLocation = (info->ModeReg.mc_fb_location & 0xffff) << 16; + info->ModeReg.surface_cntl = INREG(RADEON_SURFACE_CNTL); + info->ModeReg.surface_cntl &= ~RADEON_SURF_TRANSLATION_DIS; + } else { + if (!RADEONModeInit(pScrn, pScrn->currentMode)) return FALSE; + } + + RADEONSaveScreen(pScreen, SCREEN_SAVER_ON); + + pScrn->AdjustFrame(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0); + +#ifdef XF86DRI /* Depth moves are disabled by default since they are extremely slow */ info->depthMoves = xf86ReturnOptValBool(info->Options, OPTION_DEPTH_MOVE, FALSE); @@ -5601,12 +5828,17 @@ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Depth moves disabled by default\n"); } - - hasDRI = info->directRenderingEnabled; #endif - RADEONSetFBLocation(pScrn); + /* Initial setup of surfaces */ + if (!info->IsSecondary) { + RADEONTRACE(("Setting up initial surfaces\n")); + RADEONChangeSurfaces(pScrn); + } + + RADEONTRACE(("Initializing fb layer\n")); + /* Init fb layer */ if (!fbScreenInit(pScreen, info->FB, pScrn->virtualX, pScrn->virtualY, pScrn->xDpi, pScrn->yDpi, pScrn->displayWidth, @@ -5653,14 +5885,49 @@ } #endif /* Memory manager setup */ + + RADEONTRACE(("Setting up accel memmap\n")); + #ifdef USE_EXA - if (info->useEXA && !RADEONSetupMemEXA(pScreen)) - return FALSE; + if (info->useEXA) { +#ifdef XF86DRI + /* Reserve approx. half of offscreen memory for local textures by + * default, can be overridden with Option "FBTexPercent". + * Round down to a whole number of texture regions. + */ + info->textureSize = 50; + + if (xf86GetOptValInteger(info->Options, OPTION_FBTEX_PERCENT, + &(info->textureSize))) { + if (info->textureSize < 0 || info->textureSize > 100) { + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "Illegal texture memory percentage: %dx, setting to default 50%\n", + info->textureSize); + info->textureSize = 50; + } + } +#endif /* XF86DRI */ + + if (!RADEONSetupMemEXA(pScreen)) + return FALSE; + } #endif #if defined(XF86DRI) && defined(USE_XAA) - if (!info->useEXA && hasDRI && !RADEONSetupMemXAA_DRI(scrnIndex, pScreen)) - return FALSE; + if (!info->useEXA && hasDRI) { + info->textureSize = -1; + if (xf86GetOptValInteger(info->Options, OPTION_FBTEX_PERCENT, + &(info->textureSize))) { + if (info->textureSize < 0 || info->textureSize > 100) { + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "Illegal texture memory percentage: %dx, using default behaviour\n", + info->textureSize); + info->textureSize = -1; + } + } + if (!RADEONSetupMemXAA_DRI(scrnIndex, pScreen)) + return FALSE; + } #endif #ifdef USE_XAA @@ -5671,8 +5938,73 @@ info->dst_pitch_offset = (((pScrn->displayWidth * info->CurrentLayout.pixel_bytes / 64) << 22) | ((info->fbLocation + pScrn->fbOffset) >> 10)); - /* Acceleration setup */ + /* Backing store setup */ + RADEONTRACE(("Initializing backing store\n")); + miInitializeBackingStore(pScreen); + xf86SetBackingStore(pScreen); + + /* DRI finalisation */ +#ifdef XF86DRI + if (info->directRenderingEnabled && info->cardType==CARD_PCIE && + info->pciGartOffset && info->pKernelDRMVersion->version_minor >= 19) + { + drmRadeonSetParam radeonsetparam; + RADEONTRACE(("DRI PCIGART param\n")); + memset(&radeonsetparam, 0, sizeof(drmRadeonSetParam)); + radeonsetparam.param = RADEON_SETPARAM_PCIGART_LOCATION; + radeonsetparam.value = info->pciGartOffset; + if (drmCommandWrite(info->drmFD, DRM_RADEON_SETPARAM, + &radeonsetparam, sizeof(drmRadeonSetParam)) < 0) + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "[drm] failed set pci gart location\n"); + } + if (info->directRenderingEnabled) { + RADEONTRACE(("DRI Finishing init !\n")); + info->directRenderingEnabled = RADEONDRIFinishScreenInit(pScreen); + } + if (info->directRenderingEnabled) { + /* DRI final init might have changed the memory map, we need to adjust + * our local image to make sure we restore them properly on mode + * changes or VT switches + */ + RADEONAdjustMemMapRegisters(pScrn, &info->ModeReg); + + if ((info->DispPriority == 1) && (info->cardType==CARD_AGP)) { + /* we need to re-calculate bandwidth because of AGPMode difference. */ + RADEONInitDispBandwidth(pScrn); + } + xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Direct rendering enabled\n"); + + /* we might already be in tiled mode, tell drm about it */ + if (info->directRenderingEnabled && info->tilingEnabled) { + drmRadeonSetParam radeonsetparam; + memset(&radeonsetparam, 0, sizeof(drmRadeonSetParam)); + radeonsetparam.param = RADEON_SETPARAM_SWITCH_TILING; + radeonsetparam.value = info->tilingEnabled ? 1 : 0; + if (drmCommandWrite(info->drmFD, DRM_RADEON_SETPARAM, + &radeonsetparam, sizeof(drmRadeonSetParam)) < 0) + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "[drm] failed changing tiling status\n"); + } + } else { + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + "Direct rendering disabled\n"); + } +#endif + + /* Make sure surfaces are allright since DRI setup may have changed them */ + if (!info->IsSecondary) { + RADEONTRACE(("Setting up final surfaces\n")); + RADEONChangeSurfaces(pScrn); + } + + if(info->MergedFB) + /* need this here to fix up sarea values */ + RADEONAdjustFrameMerged(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0); + + /* Enable aceleration */ if (!xf86ReturnOptValBool(info->Options, OPTION_NOACCEL, FALSE)) { + RADEONTRACE(("Initializing Acceleration\n")); if (RADEONAccelInit(pScreen)) { xf86DrvMsg(scrnIndex, X_INFO, "Acceleration enabled\n"); info->accelOn = TRUE; @@ -5687,12 +6019,19 @@ info->accelOn = FALSE; } - /* DGA setup */ - RADEONDGAInit(pScreen); +#ifdef XF86DRI + /* Init page flipping if enabled now */ + if (info->allowPageFlip) { + RADEONTRACE(("Initializing Page Flipping\n")); + RADEONDRIInitPageFlip(pScreen); + } +#endif - /* Backing store setup */ - miInitializeBackingStore(pScreen); - xf86SetBackingStore(pScreen); + /* Init DPMS */ + RADEONTRACE(("Initializing DPMS\n")); + xf86DPMSInit(pScreen, RADEONDisplayPowerManagementSet, 0); + + RADEONTRACE(("Initializing Cursor\n")); /* Set Silken Mouse */ xf86SetSilkenMouse(pScreen); @@ -5729,7 +6068,8 @@ xf86DrvMsg(scrnIndex, X_INFO, "Using software cursor\n"); } - /* Colormap setup */ + /* Colormap setup */ + RADEONTRACE(("Initializing color map\n")); if (!miCreateDefColormap(pScreen)) return FALSE; if (!xf86HandleColormaps(pScreen, 256, info->dac6bits ? 6 : 8, RADEONLoadPalette, NULL, @@ -5739,18 +6079,10 @@ #endif | CMAP_RELOAD_ON_MODE_SWITCH)) return FALSE; - /* DPMS setup */ - xf86DPMSInit(pScreen, RADEONDisplayPowerManagementSet, 0); - - RADEONInitVideo(pScreen); - - /* Provide SaveScreen */ - pScreen->SaveScreen = RADEONSaveScreen; - - /* Wrap CloseScreen */ - info->CloseScreen = pScreen->CloseScreen; - pScreen->CloseScreen = RADEONCloseScreen; - + /* DGA setup */ + RADEONTRACE(("Initializing DGA\n")); + RADEONDGAInit(pScreen); + /* Wrap some funcs for MergedFB */ if(info->MergedFB) { info->PointerMoved = pScrn->PointerMoved; @@ -5764,80 +6096,213 @@ } } - /* Note unused options */ + /* Init Xv */ + RADEONTRACE(("Initializing Xv\n")); + RADEONInitVideo(pScreen); + + if(info->MergedFB) + /* need this here to fix up sarea values */ + RADEONAdjustFrameMerged(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0); + + /* Provide SaveScreen & wrap BlockHandler and CloseScreen */ + /* Wrap CloseScreen */ + info->CloseScreen = pScreen->CloseScreen; + pScreen->CloseScreen = RADEONCloseScreen; + pScreen->SaveScreen = RADEONSaveScreen; + info->BlockHandler = pScreen->BlockHandler; + pScreen->BlockHandler = RADEONBlockHandler; + + /* Note unused options */ if (serverGeneration == 1) xf86ShowUnusedOptions(pScrn->scrnIndex, pScrn->options); -#ifdef XF86DRI - if (info->cardType==CARD_PCIE && info->pciGartOffset && info->drmMinor>=19) - { - drmRadeonSetParam radeonsetparam; - memset(&radeonsetparam, 0, sizeof(drmRadeonSetParam)); - radeonsetparam.param = RADEON_SETPARAM_PCIGART_LOCATION; - radeonsetparam.value = info->pciGartOffset; - if (drmCommandWrite(info->drmFD, DRM_RADEON_SETPARAM, - &radeonsetparam, sizeof(drmRadeonSetParam)) < 0) - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "[drm] failed set pci gart location\n"); - } + RADEONTRACE(("RADEONScreenInit finished\n")); - /* DRI finalization */ - if (info->directRenderingEnabled) { - /* Now that mi, fb, drm and others have - done their thing, complete the DRI - setup. */ - if (!(info->directRenderingEnabled = RADEONDRIFinishScreenInit(pScreen))) { -#ifdef USE_EXA - if (info->useEXA) { - RADEONDrawInitMMIO(pScreen); + return TRUE; +} + +/* Write memory mapping registers */ +static void RADEONRestoreMemMapRegisters(ScrnInfoPtr pScrn, + RADEONSavePtr restore) +{ + RADEONInfoPtr info = RADEONPTR(pScrn); + unsigned char *RADEONMMIO = info->MMIO; + int i, timeout; + + RADEONTRACE(("RADEONRestoreMemMapRegisters() : \n")); + RADEONTRACE((" MC_FB_LOCATION : 0x%08lx\n", restore->mc_fb_location)); + RADEONTRACE((" MC_AGP_LOCATION : 0x%08lx\n", restore->mc_agp_location)); + + /* Write memory mapping registers only if their value change + * since we must ensure no access is done while they are + * reprogrammed + */ + if (INREG(RADEON_MC_FB_LOCATION) != restore->mc_fb_location || + INREG(RADEON_MC_AGP_LOCATION) != restore->mc_agp_location) { + CARD32 crtc_ext_cntl, crtc_gen_cntl, crtc2_gen_cntl=0, ov0_scale_cntl; + CARD32 old_mc_status, status_idle; + + RADEONTRACE((" Map Changed ! Applying ...\n")); + + /* Make sure engine is idle. We assume the CCE is stopped + * at this point + */ + RADEONWaitForIdleMMIO(pScrn); + + if (info->IsIGP) + goto igp_no_mcfb; + + /* Capture MC_STATUS in case things go wrong ... */ + old_mc_status = INREG(RADEON_MC_STATUS); + + /* Stop display & memory access */ + ov0_scale_cntl = INREG(RADEON_OV0_SCALE_CNTL); + OUTREG(RADEON_OV0_SCALE_CNTL, ov0_scale_cntl & ~RADEON_SCALER_ENABLE); + crtc_ext_cntl = INREG(RADEON_CRTC_EXT_CNTL); + OUTREG(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl | RADEON_CRTC_DISPLAY_DIS); + crtc_gen_cntl = INREG(RADEON_CRTC_GEN_CNTL); + RADEONWaitForVerticalSync(pScrn); + OUTREG(RADEON_CRTC_GEN_CNTL, + (crtc_gen_cntl + & ~(RADEON_CRTC_CUR_EN | RADEON_CRTC_ICON_EN)) + | RADEON_CRTC_DISP_REQ_EN_B | RADEON_CRTC_EXT_DISP_EN); + + if (info->HasCRTC2) { + crtc2_gen_cntl = INREG(RADEON_CRTC2_GEN_CNTL); + RADEONWaitForVerticalSync2(pScrn); + OUTREG(RADEON_CRTC2_GEN_CNTL, + (crtc2_gen_cntl + & ~(RADEON_CRTC2_CUR_EN | RADEON_CRTC2_ICON_EN)) + | RADEON_CRTC2_DISP_REQ_EN_B); + } + + /* Make sure the chip settles down (paranoid !) */ + usleep(100000); + + /* Wait for MC idle */ + if (IS_R300_VARIANT) + status_idle = R300_MC_IDLE; + else + status_idle = RADEON_MC_IDLE; + + timeout = 0; + while (!(INREG(RADEON_MC_STATUS) & status_idle)) { + if (++timeout > 1000000) { + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "Timeout trying to update memory controller settings !\n"); + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "MC_STATUS = 0x%08x (on entry = 0x%08x)\n", + INREG(RADEON_MC_STATUS), old_mc_status); + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "You will probably crash now ... \n"); + /* Nothing we can do except maybe try to kill the server, + * let's wait 2 seconds to leave the above message a chance + * to maybe hit the disk and continue trying to setup despite + * the MC being non-idle + */ + usleep(2000000); } -#endif /* USE_EXA */ -#ifdef USE_XAA - if (!info->useEXA) - RADEONAccelInitMMIO(pScreen, info->accel); -#endif /* USE_XAA */ - } - } - if (info->directRenderingEnabled) { - if ((info->DispPriority == 1) && (info->cardType==CARD_AGP)) { - /* we need to re-calculate bandwidth because of AGPMode difference. */ - RADEONInitDispBandwidth(pScrn); + usleep(10); } - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Direct rendering enabled\n"); - /* we might already be in tiled mode, tell drm about it */ - if (info->directRenderingEnabled && info->tilingEnabled) { - drmRadeonSetParam radeonsetparam; - memset(&radeonsetparam, 0, sizeof(drmRadeonSetParam)); - radeonsetparam.param = RADEON_SETPARAM_SWITCH_TILING; - radeonsetparam.value = info->tilingEnabled ? 1 : 0; - if (drmCommandWrite(info->drmFD, DRM_RADEON_SETPARAM, - &radeonsetparam, sizeof(drmRadeonSetParam)) < 0) + /* Update maps, first clearing out AGP to make sure we don't get + * a temporary overlap + */ + OUTREG(RADEON_MC_AGP_LOCATION, 0xfffffffc); + OUTREG(RADEON_MC_FB_LOCATION, restore->mc_fb_location); + igp_no_mcfb: + OUTREG(RADEON_MC_AGP_LOCATION, restore->mc_agp_location); + /* Make sure map fully reached the chip */ + (void)INREG(RADEON_MC_FB_LOCATION); + + RADEONTRACE((" Map applied, resetting engine ...\n")); + + /* Reset the engine and HDP */ + RADEONEngineReset(pScrn); + + /* Make sure we have sane offsets before re-enabling the CRTCs, disable + * stereo, clear offsets, and wait for offsets to catch up with hw + */ + + OUTREG(RADEON_CRTC_OFFSET_CNTL, RADEON_CRTC_OFFSET_FLIP_CNTL); + OUTREG(RADEON_CRTC_OFFSET, 0); + OUTREG(RADEON_CUR_OFFSET, 0); + timeout = 0; + while(INREG(RADEON_CRTC_OFFSET) & RADEON_CRTC_OFFSET__GUI_TRIG_OFFSET) { + if (timeout++ > 1000000) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "[drm] failed changing tiling status\n"); + "Timeout waiting for CRTC offset to update !\n"); + break; + } + usleep(1000); + } + if (info->HasCRTC2) { + OUTREG(RADEON_CRTC2_OFFSET_CNTL, RADEON_CRTC2_OFFSET_FLIP_CNTL); + OUTREG(RADEON_CRTC2_OFFSET, 0); + OUTREG(RADEON_CUR2_OFFSET, 0); + timeout = 0; + while(INREG(RADEON_CRTC2_OFFSET) & RADEON_CRTC2_OFFSET__GUI_TRIG_OFFSET) { + if (timeout++ > 1000000) { + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "Timeout waiting for CRTC2 offset to update !\n"); + break; + } + usleep(1000); + } } - - } else { - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Direct rendering disabled\n"); } -#endif - if (!info->IsSecondary) - RADEONChangeSurfaces(pScrn); + RADEONTRACE(("Updating display base addresses...\n")); - if(info->MergedFB) { - /* need this here to fix up sarea values */ - RADEONAdjustFrameMerged(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0); - } + OUTREG(RADEON_DISPLAY_BASE_ADDR, restore->display_base_addr); + if (info->HasCRTC2) + OUTREG(RADEON_DISPLAY2_BASE_ADDR, restore->display2_base_addr); + OUTREG(RADEON_OV0_BASE_ADDR, restore->ov0_base_addr); + (void)INREG(RADEON_OV0_BASE_ADDR); - info->BlockHandler = pScreen->BlockHandler; - pScreen->BlockHandler = RADEONBlockHandler; + /* More paranoia delays, wait 100ms */ + usleep(100000); - return TRUE; + RADEONTRACE(("Memory map updated.\n")); + } + +static void RADEONAdjustMemMapRegisters(ScrnInfoPtr pScrn, RADEONSavePtr save) +{ + RADEONInfoPtr info = RADEONPTR(pScrn); + unsigned char *RADEONMMIO = info->MMIO; + CARD32 fb, agp; + int fb_loc_changed; + + fb = INREG(RADEON_MC_FB_LOCATION); + agp = INREG(RADEON_MC_AGP_LOCATION); + fb_loc_changed = (fb != info->mc_fb_location); + + if (fb_loc_changed || agp != info->mc_agp_location) { + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + "DRI init changed memory map, adjusting ...\n"); + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + " MC_FB_LOCATION was: 0x%08lx is: 0x%08lx\n", + info->mc_fb_location, fb); + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, + " MC_AGP_LOCATION was: 0x%08lx is: 0x%08lx\n", + info->mc_agp_location, agp); + info->mc_fb_location = fb; + info->mc_agp_location = agp; + info->fbLocation = (save->mc_fb_location & 0xffff) << 16; + info->dst_pitch_offset = + (((pScrn->displayWidth * info->CurrentLayout.pixel_bytes / 64) + << 22) | ((info->fbLocation + pScrn->fbOffset) >> 10)); + + + RADEONInitMemMapRegisters(pScrn, save, info); + + /* If MC_FB_LOCATION was changed, adjust the various offsets */ + if (fb_loc_changed) + RADEONRestoreMemMapRegisters(pScrn, save); + } } -/* Write common registers (initialized to 0) */ +/* Write common registers */ static void RADEONRestoreCommonRegisters(ScrnInfoPtr pScrn, RADEONSavePtr restore) { @@ -5908,7 +6373,14 @@ RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; - OUTREG(RADEON_CRTC_GEN_CNTL, restore->crtc_gen_cntl); + RADEONTRACE(("Programming CRTC1, offset: 0x%08x\n", + restore->crtc_offset)); + + /* We prevent the CRTC from hitting the memory controller until + * fully programmed + */ + OUTREG(RADEON_CRTC_GEN_CNTL, restore->crtc_gen_cntl | + RADEON_CRTC_DISP_REQ_EN_B); OUTREGP(RADEON_CRTC_EXT_CNTL, restore->crtc_ext_cntl, @@ -5937,6 +6409,8 @@ OUTREG(RADEON_DAC_CNTL2, restore->dac2_cntl); OUTREG(RADEON_CRTC2_GEN_CNTL, restore->crtc2_gen_cntl); } + + OUTREG(RADEON_CRTC_GEN_CNTL, restore->crtc_gen_cntl); } /* Write CRTC2 registers */ @@ -5945,12 +6419,22 @@ { RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; + CARD32 crtc2_gen_cntl; + + RADEONTRACE(("Programming CRTC2, offset: 0x%08x\n", + restore->crtc2_offset)); - OUTREGP(RADEON_CRTC2_GEN_CNTL, - restore->crtc2_gen_cntl, - RADEON_CRTC2_VSYNC_DIS | - RADEON_CRTC2_HSYNC_DIS | - RADEON_CRTC2_DISP_DIS); + crtc2_gen_cntl = INREG(RADEON_CRTC2_GEN_CNTL) & + (RADEON_CRTC2_VSYNC_DIS | + RADEON_CRTC2_HSYNC_DIS | + RADEON_CRTC2_DISP_DIS); + crtc2_gen_cntl |= restore->crtc2_gen_cntl; + + /* We prevent the CRTC from hitting the memory controller until + * fully programmed + */ + OUTREG(RADEON_CRTC2_GEN_CNTL, + crtc2_gen_cntl | RADEON_CRTC2_DISP_REQ_EN_B); OUTREG(RADEON_DAC_CNTL2, restore->dac2_cntl); @@ -5977,6 +6461,9 @@ OUTREG(RADEON_FP_V2_SYNC_STRT_WID, restore->fp2_v_sync_strt_wid); OUTREG(RADEON_FP2_GEN_CNTL, restore->fp2_gen_cntl); } + + OUTREG(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + #if 0 /* Hack for restoring text mode -- fixed elsewhere */ usleep(100000); @@ -6255,6 +6742,35 @@ ~(RADEON_PIX2CLK_SRC_SEL_MASK)); } + +/* restore original surface info (for fb console). */ +static void RADEONRestoreSurfaces(ScrnInfoPtr pScrn, RADEONSavePtr restore) +{ + RADEONInfoPtr info = RADEONPTR(pScrn); + unsigned char *RADEONMMIO = info->MMIO; + unsigned int surfnr; + + for ( surfnr = 0; surfnr < 8; surfnr++ ) { + OUTREG(RADEON_SURFACE0_INFO + 16 * surfnr, restore->surfaces[surfnr][0]); + OUTREG(RADEON_SURFACE0_LOWER_BOUND + 16 * surfnr, restore->surfaces[surfnr][1]); + OUTREG(RADEON_SURFACE0_UPPER_BOUND + 16 * surfnr, restore->surfaces[surfnr][2]); + } +} + +/* save original surface info (for fb console). */ +static void RADEONSaveSurfaces(ScrnInfoPtr pScrn, RADEONSavePtr save) +{ + RADEONInfoPtr info = RADEONPTR(pScrn); + unsigned char *RADEONMMIO = info->MMIO; + unsigned int surfnr; + + for ( surfnr = 0; surfnr < 8; surfnr++ ) { + save->surfaces[surfnr][0] = INREG(RADEON_SURFACE0_INFO + 16 * surfnr); + save->surfaces[surfnr][1] = INREG(RADEON_SURFACE0_LOWER_BOUND + 16 * surfnr); + save->surfaces[surfnr][2] = INREG(RADEON_SURFACE0_UPPER_BOUND + 16 * surfnr); + } +} + void RADEONChangeSurfaces(ScrnInfoPtr pScrn) { /* the idea here is to only set up front buffer as tiled, and back/depth buffer when needed. @@ -6273,6 +6789,9 @@ + RADEON_BUFFER_ALIGN) & ~RADEON_BUFFER_ALIGN); unsigned int depth_pattern, color_pattern, swap_pattern; + if (!info->allowColorTiling) + return; + swap_pattern = 0; #if X_BYTE_ORDER == X_BIG_ENDIAN switch (pScrn->bitsPerPixel) { @@ -6305,8 +6824,9 @@ depth_pattern = R200_SURF_TILE_DEPTH_32BPP; } #ifdef XF86DRI - if (info->directRenderingEnabled && info->allowColorTiling) { + if (info->directRenderingInited) { drmRadeonSurfaceFree drmsurffree; + drmRadeonSurfaceAlloc drmsurfalloc; int retvalue; drmsurffree.address = info->frontOffset; @@ -6327,31 +6847,31 @@ &drmsurffree, sizeof(drmsurffree)); } - if (info->tilingEnabled) { - drmRadeonSurfaceAlloc drmsurfalloc; - drmsurfalloc.size = bufferSize; - drmsurfalloc.address = info->frontOffset; + drmsurfalloc.size = bufferSize; + drmsurfalloc.address = info->frontOffset; + drmsurfalloc.flags = swap_pattern; + if (info->tilingEnabled) { if (IS_R300_VARIANT) - drmsurfalloc.flags = swap_pattern | (width_bytes / 8) | color_pattern; + drmsurfalloc.flags |= (width_bytes / 8) | color_pattern; else - drmsurfalloc.flags = swap_pattern | (width_bytes / 16) | color_pattern; - + drmsurfalloc.flags |= (width_bytes / 16) | color_pattern; + } + retvalue = drmCommandWrite(info->drmFD, DRM_RADEON_SURF_ALLOC, + &drmsurfalloc, sizeof(drmsurfalloc)); + if (retvalue < 0) + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "drm: could not allocate surface for front buffer!\n"); + + if ((info->have3DWindows) && (!info->noBackBuffer)) { + drmsurfalloc.address = info->backOffset; retvalue = drmCommandWrite(info->drmFD, DRM_RADEON_SURF_ALLOC, - &drmsurfalloc, sizeof(drmsurfalloc)); + &drmsurfalloc, sizeof(drmsurfalloc)); if (retvalue < 0) xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "drm: could not allocate surface for front buffer!\n"); - - if ((info->have3DWindows) && (!info->noBackBuffer)) { - drmsurfalloc.address = info->backOffset; - retvalue = drmCommandWrite(info->drmFD, DRM_RADEON_SURF_ALLOC, - &drmsurfalloc, sizeof(drmsurfalloc)); - if (retvalue < 0) - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "drm: could not allocate surface for back buffer!\n"); - } + "drm: could not allocate surface for back buffer!\n"); } + /* rv100 and probably the derivative igps don't have depth tiling on all the time? */ if (info->have3DWindows && ((info->ChipFamily != CHIP_FAMILY_RV100) || (info->ChipFamily != CHIP_FAMILY_RS100) || @@ -6372,16 +6892,16 @@ } else #endif - if (info->allowColorTiling) { - unsigned int surf_info = 0; + { + unsigned int surf_info = swap_pattern; unsigned char *RADEONMMIO = info->MMIO; /* we don't need anything like WaitForFifo, no? */ if (!info->IsSecondary) { if (info->tilingEnabled) { if (IS_R300_VARIANT) - surf_info = swap_pattern | (width_bytes / 8) | color_pattern; + surf_info |= (width_bytes / 8) | color_pattern; else - surf_info = swap_pattern | (width_bytes / 16) | color_pattern; + surf_info |= (width_bytes / 16) | color_pattern; } OUTREG(RADEON_SURFACE0_INFO, surf_info); OUTREG(RADEON_SURFACE0_LOWER_BOUND, 0); @@ -6391,6 +6911,9 @@ surf_info, 0, bufferSize - 1024);*/ } } + + /* Update surface images */ + RADEONSaveSurfaces(pScrn, &info->ModeReg); } #if 0 @@ -6419,35 +6942,6 @@ } #endif -/* restore original surface info (for fb console). */ -static void RADEONRestoreSurfaces(ScrnInfoPtr pScrn, RADEONSavePtr restore) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - unsigned int surfnr; - - for ( surfnr = 0; surfnr < 8; surfnr++ ) { - OUTREG(RADEON_SURFACE0_INFO + 16 * surfnr, restore->surfaces[surfnr][0]); - OUTREG(RADEON_SURFACE0_LOWER_BOUND + 16 * surfnr, restore->surfaces[surfnr][1]); - OUTREG(RADEON_SURFACE0_UPPER_BOUND + 16 * surfnr, restore->surfaces[surfnr][2]); - } -} - -/* save original surface info (for fb console). */ -static void RADEONSaveSurfaces(ScrnInfoPtr pScrn, RADEONSavePtr save) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - unsigned int surfnr; - - for ( surfnr = 0; surfnr < 8; surfnr++ ) { - save->surfaces[surfnr][0] = INREG(RADEON_SURFACE0_INFO + 16 * surfnr); - save->surfaces[surfnr][1] = INREG(RADEON_SURFACE0_LOWER_BOUND + 16 * surfnr); - save->surfaces[surfnr][2] = INREG(RADEON_SURFACE0_UPPER_BOUND + 16 * surfnr); - } -} - - /* Write out state to define a new video mode */ static void RADEONRestoreMode(ScrnInfoPtr pScrn, RADEONSavePtr restore) { @@ -6455,8 +6949,11 @@ RADEONEntPtr pRADEONEnt = RADEONEntPriv(pScrn); static RADEONSaveRec restore0; + RADEONTRACE(("RADEONRestoreMode()\n")); + /* For Non-dual head card, we don't have private field in the Entity */ if (!info->HasCRTC2) { + RADEONRestoreMemMapRegisters(pScrn, restore); RADEONRestoreCommonRegisters(pScrn, restore); RADEONRestoreCrtcRegisters(pScrn, restore); RADEONRestoreFPRegisters(pScrn, restore); @@ -6474,14 +6971,18 @@ * order. Regardless the order of X server issuing the calls, we * have to ensure we set registers in the right order!!! Otherwise * we may get a blank screen. + * + * We always restore MemMap first, the saverec should be up to date + * in all cases */ if (info->IsSecondary) { - if (!pRADEONEnt->RestorePrimary && !info->IsSwitching) - RADEONRestoreCommonRegisters(pScrn, restore); + RADEONRestoreMemMapRegisters(pScrn, restore); + RADEONRestoreCommonRegisters(pScrn, restore); RADEONRestoreCrtc2Registers(pScrn, restore); RADEONRestorePLL2Registers(pScrn, restore); - if(info->IsSwitching) return; + if (info->IsSwitching) + return; pRADEONEnt->IsSecondaryRestored = TRUE; @@ -6494,9 +6995,8 @@ pRADEONEnt->IsSecondaryRestored = FALSE; } } else { - if (!pRADEONEnt->IsSecondaryRestored) - RADEONRestoreCommonRegisters(pScrn, restore); - + RADEONRestoreMemMapRegisters(pScrn, restore); + RADEONRestoreCommonRegisters(pScrn, restore); if (info->MergedFB) { RADEONRestoreCrtc2Registers(pScrn, restore); RADEONRestorePLL2Registers(pScrn, restore); @@ -6520,6 +7020,19 @@ #endif } +/* Read memory map */ +static void RADEONSaveMemMapRegisters(ScrnInfoPtr pScrn, RADEONSavePtr save) +{ + RADEONInfoPtr info = RADEONPTR(pScrn); + unsigned char *RADEONMMIO = info->MMIO; + + save->mc_fb_location = INREG(RADEON_MC_FB_LOCATION); + save->mc_agp_location = INREG(RADEON_MC_AGP_LOCATION); + save->display_base_addr = INREG(RADEON_DISPLAY_BASE_ADDR); + save->display2_base_addr = INREG(RADEON_DISPLAY2_BASE_ADDR); + save->ov0_base_addr = INREG(RADEON_OV0_BASE_ADDR); +} + /* Read common registers */ static void RADEONSaveCommonRegisters(ScrnInfoPtr pScrn, RADEONSavePtr save) { @@ -6703,6 +7216,7 @@ RADEONInfoPtr info = RADEONPTR(pScrn); RADEONTRACE(("RADEONSaveMode(%p)\n", save)); + RADEONSaveMemMapRegisters(pScrn, save); RADEONSaveCommonRegisters(pScrn, save); if (info->IsSecondary) { RADEONSaveCrtc2Registers(pScrn, save); @@ -6731,6 +7245,7 @@ RADEONTRACE(("RADEONSave\n")); if (info->FBDev) { + RADEONSaveMemMapRegisters(pScrn, save); fbdevHWSave(pScrn); return; } @@ -6914,8 +7429,24 @@ int stop_req, max_stop_req; float read_return_rate, time_disp1_drop_priority; - /* R420 family not supported yet */ - if (info->ChipFamily == CHIP_FAMILY_R420) return; + /* + * Set display0/1 priority up on r3/4xx in the memory controller for + * high res modes if the user specifies HIGH for displaypriority + * option. + */ + if ((info->DispPriority == 2) && IS_R300_VARIANT) { + CARD32 mc_init_misc_lat_timer = INREG(R300_MC_INIT_MISC_LAT_TIMER); + if (info->MergedFB || pRADEONEnt->HasSecondary) { + mc_init_misc_lat_timer |= 0x1100; /* display 0 and 1 */ + } else { + mc_init_misc_lat_timer |= 0x0100; /* display 0 only */ + } + OUTREG(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer); + } + + + /* R420 and RV410 family not supported yet */ + if (info->ChipFamily == CHIP_FAMILY_R420 || info->ChipFamily == CHIP_FAMILY_RV410) return; if (pRADEONEnt->pSecondaryScrn) { if (info->IsSecondary) return; @@ -7245,13 +7776,21 @@ ? RADEON_CRTC_INTERLACE_EN : 0)); + /* Don't try to be smart and unconditionally enable the analog output + * for now as the dodgy code to handle it for the second head doesn't + * work. This will be correctly fixed when Alex' megapatch gets in that + * reworks the whole output mapping + */ +#if 0 if ((info->DisplayType == MT_DFP) || (info->DisplayType == MT_LCD)) { save->crtc_ext_cntl = RADEON_VGA_ATI_LINEAR | RADEON_XCRT_CNT_EN; save->crtc_gen_cntl &= ~(RADEON_CRTC_DBL_SCAN_EN | RADEON_CRTC_CSYNC_EN | RADEON_CRTC_INTERLACE_EN); - } else { + } else +#endif + { save->crtc_ext_cntl = (RADEON_VGA_ATI_LINEAR | RADEON_XCRT_CNT_EN | RADEON_CRTC_CRT_ON); @@ -7298,7 +7837,7 @@ ? RADEON_CRTC_V_SYNC_POL : 0)); - save->crtc_offset = 0; + save->crtc_offset = pScrn->fbOffset; save->crtc_offset_cntl = INREG(RADEON_CRTC_OFFSET_CNTL); if (info->tilingEnabled) { if (IS_R300_VARIANT) @@ -7336,7 +7875,9 @@ save->disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN; #if X_BYTE_ORDER == X_BIG_ENDIAN - /* Alhought we current onlu use aperture 0, also setting aperture 1 should not harm -ReneR */ + /* We must set both apertures as they can be both used to map the entire + * video memory. -BenH. + */ switch (pScrn->bitsPerPixel) { case 16: save->surface_cntl |= RADEON_NONSURF_AP0_SWP_16BPP; @@ -7413,7 +7954,6 @@ : 0)); /* Turn CRT on in case the first head is a DFP */ - save->crtc_ext_cntl |= RADEON_CRTC_CRT_ON; save->dac2_cntl = info->SavedReg.dac2_cntl; /* always let TVDAC drive CRT2, we don't support tvout yet */ save->dac2_cntl |= RADEON_DAC2_DAC2_CLK_SEL; @@ -7493,7 +8033,7 @@ /* It seems all fancy options apart from pflip can be safely disabled */ - save->crtc2_offset = 0; + save->crtc2_offset = pScrn->fbOffset; save->crtc2_offset_cntl = INREG(RADEON_CRTC2_OFFSET_CNTL) & RADEON_CRTC_OFFSET_FLIP_CNTL; if (info->tilingEnabled) { if (IS_R300_VARIANT) @@ -7557,7 +8097,9 @@ /* We must set SURFACE_CNTL properly on the second screen too */ save->surface_cntl = 0; #if X_BYTE_ORDER == X_BIG_ENDIAN - /* Alhought we current onlu use aperture 0, also setting aperture 1 should not harm -ReneR */ + /* We must set both apertures as they can be both used to map the entire + * video memory. -BenH. + */ switch (pScrn->bitsPerPixel) { case 16: save->surface_cntl |= RADEON_NONSURF_AP0_SWP_16BPP; @@ -7759,14 +8301,14 @@ } } - info->BiosHotkeys = FALSE; + info->BiosHotkeys = TRUE; /* * Allow the bios to toggle outputs. see below for more. */ - if (xf86ReturnOptValBool(info->Options, OPTION_BIOS_HOTKEYS, FALSE)) { - info->BiosHotkeys = TRUE; + if (xf86ReturnOptValBool(info->Options, OPTION_BIOS_HOTKEYS, TRUE)) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "BIOS HotKeys Enabled\n"); } else { + info->BiosHotkeys = FALSE; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "BIOS HotKeys Disabled\n"); } @@ -7822,8 +8364,9 @@ } /* Define PLL registers for requested video mode */ -static void RADEONInitPLLRegisters(RADEONInfoPtr info, RADEONSavePtr save, - RADEONPLLPtr pll, double dot_clock) +static void RADEONInitPLLRegisters(ScrnInfoPtr pScrn, RADEONInfoPtr info, + RADEONSavePtr save, RADEONPLLPtr pll, + double dot_clock) { unsigned long freq = dot_clock * 100; @@ -7887,8 +8430,9 @@ } /* Define PLL2 registers for requested video mode */ -static void RADEONInitPLL2Registers(RADEONSavePtr save, RADEONPLLPtr pll, - double dot_clock, int no_odd_postdiv) +static void RADEONInitPLL2Registers(ScrnInfoPtr pScrn, RADEONSavePtr save, + RADEONPLLPtr pll, double dot_clock, + int no_odd_postdiv) { unsigned long freq = dot_clock * 100; @@ -8016,19 +8560,19 @@ info->Flags = mode->Flags; + RADEONInitMemMapRegisters(pScrn, save, info); RADEONInitCommonRegisters(save, info); if (info->IsSecondary) { if (!RADEONInitCrtc2Registers(pScrn, save, mode, info)) return FALSE; - RADEONInitPLL2Registers(save, &info->pll, dot_clock, info->DisplayType != MT_CRT); + RADEONInitPLL2Registers(pScrn, save, &info->pll, dot_clock, info->DisplayType != MT_CRT); } else if (info->MergedFB) { - RADEONInitCommonRegisters(save, info); if (!RADEONInitCrtcRegisters(pScrn, save, ((RADEONMergedDisplayModePtr)mode->Private)->CRT1, info)) return FALSE; dot_clock = (((RADEONMergedDisplayModePtr)mode->Private)->CRT1)->Clock / 1000.0; if (dot_clock) { - RADEONInitPLLRegisters(info, save, &info->pll, dot_clock); + RADEONInitPLLRegisters(pScrn, info, save, &info->pll, dot_clock); } else { save->ppll_ref_div = info->SavedReg.ppll_ref_div; save->ppll_div_3 = info->SavedReg.ppll_div_3; @@ -8037,13 +8581,13 @@ RADEONInitCrtc2Registers(pScrn, save, ((RADEONMergedDisplayModePtr)mode->Private)->CRT2, info); dot_clock = (((RADEONMergedDisplayModePtr)mode->Private)->CRT2)->Clock / 1000.0; - RADEONInitPLL2Registers(save, &info->pll, dot_clock, info->MergeType != MT_CRT); + RADEONInitPLL2Registers(pScrn, save, &info->pll, dot_clock, info->MergeType != MT_CRT); } else { if (!RADEONInitCrtcRegisters(pScrn, save, mode, info)) return FALSE; dot_clock = mode->Clock/1000.0; if (dot_clock) { - RADEONInitPLLRegisters(info, save, &info->pll, dot_clock); + RADEONInitPLLRegisters(pScrn, info, save, &info->pll, dot_clock); } else { save->ppll_ref_div = info->SavedReg.ppll_ref_div; save->ppll_div_3 = info->SavedReg.ppll_div_3; @@ -8079,6 +8623,8 @@ { RADEONInfoPtr info = RADEONPTR(pScrn); + RADEONTRACE(("RADEONModeInit()\n")); + if (!RADEONInit(pScrn, mode, &info->ModeReg)) return FALSE; pScrn->vtSema = TRUE; @@ -8099,6 +8645,8 @@ ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; Bool unblank; + RADEONTRACE(("RADEONSaveScreen(%d)\n", mode)); + unblank = xf86IsUnblank(mode); if (unblank) SetTimeSinceLastInputEvent(); @@ -8124,6 +8672,8 @@ } #endif + RADEONTRACE(("RADEONSwitchMode() !n")); + if (info->allowColorTiling) { if (info->MergedFB) { if ((((RADEONMergedDisplayModePtr)mode->Private)->CRT1->Flags & @@ -8237,6 +8787,10 @@ XF86DRISAREAPtr pSAREA; #endif +#if 0 /* Verbose */ + RADEONTRACE(("RADEONDoAdjustFrame(%d,%d,%d)\n", x, y, clone)); +#endif + if (info->showCache && y) { int lastline = info->FbMapSize / ((pScrn->displayWidth * pScrn->bitsPerPixel) / 8); @@ -8288,19 +8842,20 @@ } } else { - Base += y * info->CurrentLayout.displayWidth + x; + int offset = y * info->CurrentLayout.displayWidth + x; switch (info->CurrentLayout.pixel_code) { case 15: - case 16: Base *= 2; break; - case 24: Base *= 3; break; - case 32: Base *= 4; break; + case 16: offset *= 2; break; + case 24: offset *= 3; break; + case 32: offset *= 4; break; } + Base += offset; } Base &= ~7; /* 3 lower bits are always 0 */ #ifdef XF86DRI - if (info->directRenderingEnabled) { + if (info->directRenderingInited) { /* note cannot use pScrn->pScreen since this is unitialized when called from RADEONScreenInit, and we need to call from there to get mergedfb + pageflip working */ /*** NOTE: r3/4xx will need sarea and drm pageflip updates to handle the xytile regs for @@ -8344,7 +8899,7 @@ RADEONInfoPtr info = RADEONPTR(pScrn); #ifdef XF86DRI - if (info->CPStarted) DRILock(pScrn->pScreen, 0); + if (info->CPStarted && pScrn->pScreen) DRILock(pScrn->pScreen, 0); #endif if (info->accelOn) @@ -8359,7 +8914,7 @@ } #ifdef XF86DRI - if (info->CPStarted) DRIUnlock(pScrn->pScreen); + if (info->CPStarted && pScrn->pScreen) DRIUnlock(pScrn->pScreen); #endif } @@ -8386,6 +8941,9 @@ } } + /* Makes sure the engine is idle before doing anything */ + RADEONWaitForIdleMMIO(pScrn); + if (info->FBDev) { unsigned char *RADEONMMIO = info->MMIO; if (!fbdevHWEnterVT(scrnIndex,flags)) return FALSE; @@ -8396,13 +8954,19 @@ } else if (!RADEONModeInit(pScrn, pScrn->currentMode)) return FALSE; - RADEONSetFBLocation(pScrn); if (!info->IsSecondary) RADEONRestoreSurfaces(pScrn, &info->ModeReg); #ifdef XF86DRI if (info->directRenderingEnabled) { - /* get the Radeon back into shape after resume */ + if (info->cardType == CARD_PCIE && info->pKernelDRMVersion->version_minor >= 19 && info->FbSecureSize) + { + /* we need to backup the PCIE GART TABLE from fb memory */ + memcpy(info->FB + info->pciGartOffset, info->pciGartBackup, info->pciGartSize); + } + + /* get the DRI back into shape after resume */ RADEONDRIResume(pScrn->pScreen); + RADEONAdjustMemMapRegisters(pScrn, &info->ModeReg); } #endif /* this will get XVideo going again, but only if XVideo was initialised @@ -8436,9 +9000,15 @@ RADEONTRACE(("RADEONLeaveVT\n")); #ifdef XF86DRI - if (RADEONPTR(pScrn)->directRenderingEnabled) { + if (RADEONPTR(pScrn)->directRenderingInited) { DRILock(pScrn->pScreen, 0); RADEONCP_STOP(pScrn, info); + + if (info->cardType == CARD_PCIE && info->pKernelDRMVersion->version_minor >= 19 && info->FbSecureSize) + { + /* we need to backup the PCIE GART TABLE from fb memory */ + memcpy(info->pciGartBackup, (info->FB + info->pciGartOffset), info->pciGartSize); + } } #endif @@ -8451,9 +9021,9 @@ fbdevHWLeaveVT(scrnIndex,flags); } - if (!info->IsSecondary) - RADEONSaveSurfaces(pScrn, save); RADEONRestore(pScrn); + + RADEONTRACE(("Ok, leaving now...\n")); } /* Called at the end of each server generation. Restore the original @@ -8467,12 +9037,13 @@ RADEONTRACE(("RADEONCloseScreen\n")); + /* Mark acceleration as stopped or we might try to access the engine at + * wrong times, especially if we had DRI, after DRI has been stopped + */ + info->accelOn = FALSE; + #ifdef XF86DRI - /* Disable direct rendering */ - if (info->directRenderingEnabled) { - RADEONDRICloseScreen(pScreen); - info->directRenderingEnabled = FALSE; - } + RADEONDRIStop(pScreen); #endif #ifdef USE_XAA @@ -8486,8 +9057,8 @@ RADEONDisplayPowerManagementSet(pScrn, DPMSModeOn, 0); RADEONRestore(pScrn); } - RADEONUnmapMem(pScrn); + RADEONTRACE(("Disposing accel...\n")); #ifdef USE_EXA if (info->useEXA && info->accelOn) exaDriverFini(pScreen); @@ -8504,11 +9075,15 @@ } #endif /* USE_XAA */ + RADEONTRACE(("Disposing cusor info\n")); if (info->cursor) xf86DestroyCursorInfoRec(info->cursor); info->cursor = NULL; + RADEONTRACE(("Disposing DGA\n")); if (info->DGAModes) xfree(info->DGAModes); info->DGAModes = NULL; + RADEONTRACE(("Unmapping memory\n")); + RADEONUnmapMem(pScrn); pScrn->vtSema = FALSE; @@ -8647,6 +9222,8 @@ if (!pScrn->vtSema) return; + RADEONTRACE(("RADEONDisplayPowerManagementSet(%d,0x%x)\n", PowerManagementMode, flags)); + #ifdef XF86DRI if (info->CPStarted) DRILock(pScrn->pScreen, 0); #endif --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_cursor.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_cursor.c @@ -31,6 +31,9 @@ #include "config.h" #endif +#define RADEONCTRACE(x) +/* #define RADEONCTRACE(x) RADEONTRACE(x) */ + /* * Authors: * Kevin E. Martin @@ -50,6 +53,7 @@ /* Driver data structures */ #include "radeon.h" +#include "radeon_version.h" #include "radeon_reg.h" #include "radeon_macros.h" #include "radeon_mergedfb.h" @@ -81,11 +85,11 @@ #define CURSOR_SWAPPING_DECL_MMIO unsigned char *RADEONMMIO = info->MMIO; #define CURSOR_SWAPPING_START() \ do { \ + COMMON_CURSOR_SWAPPING_START(); \ OUTREG(RADEON_SURFACE_CNTL, \ (info->ModeReg.surface_cntl | \ - RADEON_NONSURF_AP0_SWP_32BPP) & \ - ~RADEON_NONSURF_AP0_SWP_16BPP); \ - COMMON_CURSOR_SWAPPING_START(); \ + RADEON_NONSURF_AP0_SWP_32BPP | RADEON_NONSURF_AP1_SWP_32BPP) & \ + ~(RADEON_NONSURF_AP0_SWP_16BPP | RADEON_NONSURF_AP1_SWP_16BPP)); \ } while (0) #define CURSOR_SWAPPING_END() (OUTREG(RADEON_SURFACE_CNTL, \ info->ModeReg.surface_cntl)) @@ -133,9 +137,9 @@ "Using hardware cursor\n", info->cursor_offset = info->cursorArea->offset); - RADEONTRACE(("%s (0x%08x-0x%08x)\n", __func__, - info->cursor_offset, - info->cursor_offset + info->cursorArea->size)); + RADEONCTRACE(("%s (0x%08x-0x%08x)\n", __func__, + info->cursor_offset, + info->cursor_offset + info->cursorArea->size)); } } #endif @@ -149,6 +153,11 @@ int pixel, i; CURSOR_SWAPPING_DECL_MMIO + RADEONCTRACE(("RADEONSetCursorColors\n")); + + if (info->cursor_offset == 0) + return; + #ifdef ARGB_CURSOR /* Don't recolour cursors set with SetCursorARGB. */ if (info->cursor_argb) @@ -191,11 +200,17 @@ int total_y = pScrn->frameY1 - pScrn->frameY0; int stride = 256; + if (info->cursor_offset == 0) + return; + if(info->MergedFB) { + RADEONCTRACE(("RADEONSetCursorPositionMerged\n")); RADEONSetCursorPositionMerged(pScrn, x, y); return; } + RADEONCTRACE(("RADEONSetCursorPosition\n")); + if (x < 0) xorigin = -x+1; if (y < 0) yorigin = -y+1; if (y > total_y) y = total_y; @@ -210,6 +225,8 @@ OUTREG(RADEON_CUR_HORZ_VERT_POSN, (RADEON_CUR_LOCK | ((xorigin ? 0 : x) << 16) | (yorigin ? 0 : y))); + RADEONCTRACE(("cursor_offset: 0x%x, yorigin: %d, stride: %d\n", + info->cursor_offset, yorigin, stride)); OUTREG(RADEON_CUR_OFFSET, info->cursor_offset + yorigin * stride); } else { OUTREG(RADEON_CUR2_HORZ_VERT_OFF, (RADEON_CUR2_LOCK @@ -238,6 +255,11 @@ CARD8 chunk; CARD32 i, j; + if (info->cursor_offset == 0) + return; + + RADEONCTRACE(("RADEONLoadCursorImage (at %x)\n", info->cursor_offset)); + if (!info->IsSecondary) { save1 = INREG(RADEON_CRTC_GEN_CNTL) & ~(CARD32) (3 << 20); save1 |= (CARD32) (2 << 20); @@ -264,7 +286,7 @@ */ CURSOR_SWAPPING_START(); #define ARGB_PER_CHUNK (8 * sizeof (chunk) / 2) - for (i = 0; i < CURSOR_WIDTH * CURSOR_HEIGHT / ARGB_PER_CHUNK; i++) { + for (i = 0; i < (CURSOR_WIDTH * CURSOR_HEIGHT / ARGB_PER_CHUNK); i++) { chunk = *s++; for (j = 0; j < ARGB_PER_CHUNK; j++, chunk >>= 2) *d++ = mono_cursor_color[chunk & 3]; @@ -288,6 +310,8 @@ RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; + RADEONCTRACE(("RADEONHideCursor\n")); + if (info->IsSecondary || info->MergedFB) OUTREGP(RADEON_CRTC2_GEN_CNTL, 0, ~RADEON_CRTC2_CUR_EN); @@ -301,6 +325,8 @@ RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; + RADEONCTRACE(("RADEONShowCursor\n")); + if (info->IsSecondary || info->MergedFB) OUTREGP(RADEON_CRTC2_GEN_CNTL, RADEON_CRTC2_CUR_EN, ~RADEON_CRTC2_CUR_EN); @@ -351,8 +377,10 @@ CARD32 *image = pCurs->bits->argb; CARD32 *i; - if (!image) - return; /* XXX can't happen */ + RADEONCTRACE(("RADEONLoadCursorARGB\n")); + + if (info->cursor_offset == 0) + return; if (!info->IsSecondary) { save1 = INREG(RADEON_CRTC_GEN_CNTL) & ~(CARD32) (3 << 20); @@ -473,7 +501,7 @@ 256); info->cursor_end = info->cursor_offset + size_bytes; } - RADEONTRACE(("RADEONCursorInit (0x%08x-0x%08x)\n", + RADEONCTRACE(("RADEONCursorInit (0x%08x-0x%08x)\n", info->cursor_offset, info->cursor_end)); } #endif --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_accel.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_accel.c @@ -292,19 +292,19 @@ { RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; - int pitch64; RADEONTRACE(("EngineRestore (%d/%d)\n", info->CurrentLayout.pixel_code, info->CurrentLayout.bitsPerPixel)); - RADEONWaitForFifo(pScrn, 1); - - pitch64 = ((pScrn->displayWidth * (pScrn->bitsPerPixel / 8) + 0x3f)) >> 6; - -/* RADEONWaitForFifo(pScrn, 2); + /* Setup engine location. This shouldn't be necessary since we + * set them appropriately before any accel ops, but let's avoid + * random bogus DMA in case we inadvertently trigger the engine + * in the wrong place (happened). + */ + RADEONWaitForFifo(pScrn, 2); OUTREG(RADEON_DST_PITCH_OFFSET, info->dst_pitch_offset); - OUTREG(RADEON_SRC_PITCH_OFFSET, info->dst_pitch_offset);*/ + OUTREG(RADEON_SRC_PITCH_OFFSET, info->dst_pitch_offset); RADEONWaitForFifo(pScrn, 1); #if X_BYTE_ORDER == X_BIG_ENDIAN @@ -326,9 +326,7 @@ | RADEON_GMC_BRUSH_SOLID_COLOR | RADEON_GMC_SRC_DATATYPE_COLOR)); - RADEONWaitForFifo(pScrn, 7); - OUTREG(RADEON_DST_LINE_START, 0); - OUTREG(RADEON_DST_LINE_END, 0); + RADEONWaitForFifo(pScrn, 5); OUTREG(RADEON_DP_BRUSH_FRGD_CLR, 0xffffffff); OUTREG(RADEON_DP_BRUSH_BKGD_CLR, 0x00000000); OUTREG(RADEON_DP_SRC_FRGD_CLR, 0xffffffff); --- xserver-xorg-driver-ati-6.5.7.3.orig/src/r128_dri.c +++ xserver-xorg-driver-ati-6.5.7.3/src/r128_dri.c @@ -52,7 +52,7 @@ /* X and server generic header files */ #include "xf86.h" #include "windowstr.h" -#include "xf86PciInfo.h" +#include "atipciids.h" #include "shadowfb.h" /* GLX/DRI/DRM definitions */ --- xserver-xorg-driver-ati-6.5.7.3.orig/src/r128_driver.c +++ xserver-xorg-driver-ati-6.5.7.3/src/r128_driver.c @@ -85,7 +85,6 @@ /* X and server generic header files */ #include "xf86.h" #include "xf86_OSproc.h" -#include "xf86PciInfo.h" #include "xf86RAC.h" #include "xf86Resources.h" #include "xf86cmap.h" @@ -103,6 +102,7 @@ #define DPMS_SERVER #include +#include "atipciids.h" #include "r128_chipset.h" #ifndef MAX --- xserver-xorg-driver-ati-6.5.7.3.orig/src/ativga.c +++ xserver-xorg-driver-ati-6.5.7.3/src/ativga.c @@ -1,5 +1,5 @@ /* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ativga.c,v 1.20 2003/04/23 21:51:31 tsi Exp $ */ -/* $XdotOrg: xc/programs/Xserver/hw/xfree86/drivers/ati/ativga.c,v 1.4 2005/06/04 20:26:28 alanc Exp $ */ +/* $XdotOrg: driver/xf86-video-ati/src/ativga.c,v 1.6 2005-07-11 02:29:45 ajax Exp $ */ /* * Copyright 1997 through 2004 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org * --- xserver-xorg-driver-ati-6.5.7.3.orig/src/atipreinit.c +++ xserver-xorg-driver-ati-6.5.7.3/src/atipreinit.c @@ -1,5 +1,5 @@ /* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atipreinit.c,v 1.74 2003/12/22 17:48:09 tsi Exp $ */ -/* $XdotOrg: xc/programs/Xserver/hw/xfree86/drivers/ati/atipreinit.c,v 1.6 2005/06/26 04:38:12 ajax Exp $ */ +/* $XdotOrg: driver/xf86-video-ati/src/atipreinit.c,v 1.9 2005-08-28 18:10:34 ajax Exp $ */ /* * Copyright 1999 through 2004 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org * --- xserver-xorg-driver-ati-6.5.7.3.orig/src/r128_probe.c +++ xserver-xorg-driver-ati-6.5.7.3/src/r128_probe.c @@ -45,8 +45,7 @@ #include "r128_probe.h" #include "r128_version.h" - -#include "xf86PciInfo.h" +#include "atipciids.h" #include "xf86.h" #include "xf86_ansic.h" --- xserver-xorg-driver-ati-6.5.7.3.orig/src/radeon_probe.c +++ xserver-xorg-driver-ati-6.5.7.3/src/radeon_probe.c @@ -44,8 +44,7 @@ #include "radeon_probe.h" #include "radeon_version.h" - -#include "xf86PciInfo.h" +#include "atipciids.h" #include "xf86.h" #include "xf86_ansic.h" @@ -129,12 +128,15 @@ { PCI_CHIP_RV380_3E50, PCI_CHIP_RV380_3E50, RES_SHARED_VGA }, { PCI_CHIP_RV380_3E54, PCI_CHIP_RV380_3E54, RES_SHARED_VGA }, { PCI_CHIP_RV380_3150, PCI_CHIP_RV380_3150, RES_SHARED_VGA }, + { PCI_CHIP_RV380_3152, PCI_CHIP_RV380_3152, RES_SHARED_VGA }, { PCI_CHIP_RV380_3154, PCI_CHIP_RV380_3154, RES_SHARED_VGA }, { PCI_CHIP_RV370_5B60, PCI_CHIP_RV370_5B60, RES_SHARED_VGA }, { PCI_CHIP_RV370_5B62, PCI_CHIP_RV370_5B62, RES_SHARED_VGA }, + { PCI_CHIP_RV370_5B63, PCI_CHIP_RV370_5B63, RES_SHARED_VGA }, { PCI_CHIP_RV370_5B64, PCI_CHIP_RV370_5B64, RES_SHARED_VGA }, { PCI_CHIP_RV370_5B65, PCI_CHIP_RV370_5B65, RES_SHARED_VGA }, { PCI_CHIP_RV370_5460, PCI_CHIP_RV370_5460, RES_SHARED_VGA }, + { PCI_CHIP_RV370_5462, PCI_CHIP_RV370_5462, RES_SHARED_VGA }, { PCI_CHIP_RV370_5464, PCI_CHIP_RV370_5464, RES_SHARED_VGA }, { PCI_CHIP_RS400_5A41, PCI_CHIP_RS400_5A41, RES_SHARED_VGA }, { PCI_CHIP_RS400_5A42, PCI_CHIP_RS400_5A42, RES_SHARED_VGA }, @@ -147,6 +149,7 @@ { PCI_CHIP_RV410_5E48, PCI_CHIP_RV410_5E48, RES_SHARED_VGA }, { PCI_CHIP_RV410_564A, PCI_CHIP_RV410_564A, RES_SHARED_VGA }, { PCI_CHIP_RV410_564B, PCI_CHIP_RV410_564B, RES_SHARED_VGA }, + { PCI_CHIP_RV410_564F, PCI_CHIP_RV410_564F, RES_SHARED_VGA }, { PCI_CHIP_RV410_5652, PCI_CHIP_RV410_5652, RES_SHARED_VGA }, { PCI_CHIP_RV410_5653, PCI_CHIP_RV410_5653, RES_SHARED_VGA }, { PCI_CHIP_RV410_5E4B, PCI_CHIP_RV410_5E4B, RES_SHARED_VGA }, @@ -163,6 +166,7 @@ { PCI_CHIP_R420_JN, PCI_CHIP_R420_JN, RES_SHARED_VGA }, { PCI_CHIP_R420_JP, PCI_CHIP_R420_JP, RES_SHARED_VGA }, { PCI_CHIP_R420_4A4F, PCI_CHIP_R420_4A4F, RES_SHARED_VGA }, + { PCI_CHIP_R420_4A54, PCI_CHIP_R420_4A54, RES_SHARED_VGA }, { PCI_CHIP_R423_UH, PCI_CHIP_R423_UH, RES_SHARED_VGA }, { PCI_CHIP_R423_UI, PCI_CHIP_R423_UI, RES_SHARED_VGA }, { PCI_CHIP_R423_UJ, PCI_CHIP_R423_UJ, RES_SHARED_VGA }, --- xserver-xorg-driver-ati-6.5.7.3.orig/src/atichip.c +++ xserver-xorg-driver-ati-6.5.7.3/src/atichip.c @@ -104,13 +104,18 @@ "ATI Radeon 9200", "ATI Radeon Mobility M9+", "ATI Radeon 9700/9500", - "ATI Radeon 9600", + "ATI Radeon 9600/9550", "ATI Radeon 9800", "ATI Radeon 9800XT", - "ATI Radeon X300/M22", - "ATI Radeon X600/M24", - "ATI Radeon X800/M18", - "ATI Radeon X800 PCIE", + "ATI Radeon X300/X550/M22", + "ATI Radeon X600/X550/M24", + "ATI Radeon X800/M18 AGP", + "ATI Radeon X800/M28 PCIE", + "ATI Radeon X800XL PCIE", + "ATI Radeon X850 PCIE", + "ATI Radeon X850 AGP", + "ATI Radeon X700", + "ATI Xpress 200" "ATI unknown Radeon", "ATI Rage HDTV" }; @@ -642,6 +647,7 @@ case NewChipID('Q', 'Y'): case NewChipID('Q', 'Z'): + case NewChipID('Q', '^'): return ATI_CHIP_RADEONVE; case NewChipID('L', 'Y'): @@ -705,6 +711,7 @@ case NewChipID('Y', 'a'): case NewChipID('Y', 'b'): case NewChipID('Y', 'd'): + case NewChipID('Y', 'e'): return ATI_CHIP_RV280; case NewChipID('\\', 'a'): @@ -735,6 +742,7 @@ case NewChipID('A', 'R'): case NewChipID('A', 'S'): case NewChipID('A', 'T'): + case NewChipID('A', 'U'): case NewChipID('A', 'V'): case NewChipID('N', 'P'): case NewChipID('N', 'Q'): @@ -749,15 +757,18 @@ case NewChipID('[', '\''): case NewChipID('[', 'b'): + case NewChipID('[', 'c'): case NewChipID('[', 'd'): case NewChipID('[', 'e'): case NewChipID('T', '\''): + case NewChipID('T', 'b'): case NewChipID('T', 'd'): return ATI_CHIP_RV370; case NewChipID('>', 'P'): case NewChipID('>', 'T'): case NewChipID('1', 'P'): + case NewChipID('1', 'R'): case NewChipID('1', 'T'): return ATI_CHIP_RV380; @@ -768,19 +779,70 @@ case NewChipID('J', 'L'): case NewChipID('J', 'M'): case NewChipID('J', 'N'): + case NewChipID('J', 'O'): case NewChipID('J', 'P'): + case NewChipID('J', 'T'): return ATI_CHIP_R420; case NewChipID('U', 'H'): case NewChipID('U', 'I'): case NewChipID('U', 'J'): case NewChipID('U', 'K'): + case NewChipID('U', 'P'): case NewChipID('U', 'Q'): case NewChipID('U', 'R'): case NewChipID('U', 'T'): case NewChipID(']', 'W'): + /* those are m28, not 100% certain they are r423 could + be r480 but not r430 as their pci id names indicate... */ + case NewChipID(']', 'H'): + case NewChipID(']', 'I'): + case NewChipID(']', 'J'): return ATI_CHIP_R423; + case NewChipID('U', 'L'): + case NewChipID('U', 'M'): + case NewChipID('U', 'N'): + case NewChipID('U', 'O'): + return ATI_CHIP_R430; + + case NewChipID(']', 'L'): + case NewChipID(']', 'M'): + case NewChipID(']', 'N'): + case NewChipID(']', 'O'): + case NewChipID(']', 'P'): + case NewChipID(']', 'R'): + return ATI_CHIP_R480; + + case NewChipID('K', 'I'): + case NewChipID('K', 'J'): + case NewChipID('K', 'K'): + case NewChipID('K', 'L'): + return ATI_CHIP_R481; + + case NewChipID('^', 'H'): + case NewChipID('^', 'J'): + case NewChipID('^', 'K'): + case NewChipID('^', 'L'): + case NewChipID('^', 'M'): + case NewChipID('^', 'O'): + case NewChipID('V', 'J'): + case NewChipID('V', 'K'): + case NewChipID('V', 'O'): + case NewChipID('V', 'R'): + case NewChipID('V', 'S'): + return ATI_CHIP_RV410; + + case NewChipID('Z', 'A'): + case NewChipID('Z', 'B'): + case NewChipID('Z', 'a'): + case NewChipID('Z', 'b'): + case NewChipID('Y', 'T'): + case NewChipID('Y', 'U'): + case NewChipID('Y', 't'): + case NewChipID('Y', 'u'): + return ATI_CHIP_RS400; + case NewChipID('H', 'D'): return ATI_CHIP_HDTV; --- xserver-xorg-driver-ati-6.5.7.3.orig/src/Makefile.am +++ xserver-xorg-driver-ati-6.5.7.3/src/Makefile.am @@ -138,6 +138,7 @@ atimodule.h \ atimono.h \ atioption.h \ + atipciids.h \ atipreinit.h \ atiprint.h \ atipriv.h \ --- xserver-xorg-driver-ati-6.5.7.3.orig/src/Makefile.in +++ xserver-xorg-driver-ati-6.5.7.3/src/Makefile.in @@ -314,6 +314,7 @@ atimodule.h \ atimono.h \ atioption.h \ + atipciids.h \ atipreinit.h \ atiprint.h \ atipriv.h \ --- xserver-xorg-driver-ati-6.5.7.3.orig/src/CVS/Root +++ xserver-xorg-driver-ati-6.5.7.3/src/CVS/Root @@ -0,0 +1 @@ +:pserver:anoncvs@cvs.freedesktop.org:/cvs/xorg --- xserver-xorg-driver-ati-6.5.7.3.orig/src/CVS/Repository +++ xserver-xorg-driver-ati-6.5.7.3/src/CVS/Repository @@ -0,0 +1 @@ +driver/xf86-video-ati/src --- xserver-xorg-driver-ati-6.5.7.3.orig/src/CVS/Entries +++ xserver-xorg-driver-ati-6.5.7.3/src/CVS/Entries @@ -0,0 +1,164 @@ +/ati.c/1.4/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atiaccel.c/1.4/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atiaccel.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atiadapter.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atiadapter.h/1.2/Fri Apr 23 19:26:46 2004//Tati-1-0-branch +/atiadjust.c/1.4/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atiadjust.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atiaudio.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atiaudio.h/1.2/Fri Apr 23 19:26:46 2004//Tati-1-0-branch +/atibank.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atibank.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atibus.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atibus.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/aticlock.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/aticlock.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/aticonfig.c/1.5/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/aticonfig.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/aticonsole.c/1.7/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/aticonsole.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/aticrtc.h/1.2/Fri Apr 23 19:26:46 2004//Tati-1-0-branch +/aticursor.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/aticursor.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atidac.c/1.4/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atidac.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atidecoder.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atidecoder.h/1.2/Fri Apr 23 19:26:46 2004//Tati-1-0-branch +/atidga.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atidga.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atidri.c/1.6/Fri Oct 21 18:40:18 2005//Tati-1-0-branch +/atidri.h/1.3/Sun Dec 19 06:56:37 2004//Tati-1-0-branch +/atidripriv.h/1.2/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atidsp.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atidsp.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atifillin.c/1.4/Mon Aug 22 03:05:52 2005//Tati-1-0-branch +/atifillin.h/1.3/Mon Aug 22 03:05:52 2005//Tati-1-0-branch +/atii2c.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atii2c.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atiident.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atiident.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atiio.h/1.2/Fri Apr 23 19:26:46 2004//Tati-1-0-branch +/atiload.c/1.4/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atiload.h/1.4/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atilock.c/1.5/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atilock.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atimach64.c/1.6/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atimach64.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atimach64accel.c/1.4/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atimach64accel.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atimach64cursor.c/1.4/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atimach64cursor.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atimach64i2c.c/1.3/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atimach64i2c.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atimach64io.c/1.4/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atimach64io.h/1.4/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atimach64xv.c/1.5/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atimach64xv.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atimisc.c/1.5/Mon Jul 11 02:29:44 2005//Tati-1-0-branch +/atimode.c/1.5/Sun Aug 28 18:10:34 2005//Tati-1-0-branch +/atimode.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atimodule.c/1.6/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atimodule.h/1.2/Fri Apr 23 19:26:46 2004//Tati-1-0-branch +/atimono.h/1.2/Fri Apr 23 19:26:46 2004//Tati-1-0-branch +/atioption.c/1.5/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atioption.h/1.5/Sat Mar 26 00:53:01 2005//Tati-1-0-branch +/atipreinit.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atiprint.c/1.3/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atiprint.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atipriv.h/1.2/Fri Apr 23 19:26:46 2004//Tati-1-0-branch +/atiprobe.c/1.6/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atiprobe.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atiregs.h/1.4/Sun Aug 28 18:10:34 2005//Tati-1-0-branch +/atirgb514.c/1.3/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atirgb514.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atiscreen.c/1.7/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atiscreen.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atistruct.h/1.5/Sun Jul 31 17:19:27 2005//Tati-1-0-branch +/atituner.c/1.3/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atituner.h/1.2/Fri Apr 23 19:26:46 2004//Tati-1-0-branch +/atiutil.c/1.3/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atiutil.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/ativalid.c/1.4/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/ativalid.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/ativga.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/ativgaio.c/1.3/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/ativgaio.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atividmem.c/1.3/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atividmem.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atiwonder.c/1.3/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atiwonder.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atiwonderio.c/1.3/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atiwonderio.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/atixv.c/1.3/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/atixv.h/1.3/Tue Sep 21 18:10:34 2004//Tati-1-0-branch +/generic_bus.h/1.2/Sun Apr 17 23:28:09 2005//Tati-1-0-branch +/mach64_common.h/1.1.3.1/Wed Jun 16 09:25:58 2004//Tati-1-0-branch +/mach64_dri.h/1.1.3.1/Wed Jun 16 09:25:58 2004//Tati-1-0-branch +/mach64_sarea.h/1.2/Wed Apr 20 12:25:22 2005//Tati-1-0-branch +/r128.h/1.5/Sun Dec 19 19:49:33 2004//Tati-1-0-branch +/r128_accel.c/1.7/Wed Dec 14 19:41:28 2005//Tati-1-0-branch +/r128_chipset.h/1.1/Thu Aug 12 02:23:46 2004//Tati-1-0-branch +/r128_common.h/1.3/Wed Apr 20 12:25:22 2005//Tati-1-0-branch +/r128_cursor.c/1.4/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/r128_dga.c/1.4/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/r128_dri.h/1.3/Wed Jun 16 09:43:58 2004//Tati-1-0-branch +/r128_dripriv.h/1.2/Fri Apr 23 19:26:46 2004//Tati-1-0-branch +/r128_misc.c/1.4/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/r128_probe.h/1.7/Sun Dec 19 19:49:33 2004//Tati-1-0-branch +/r128_reg.h/1.5/Mon May 23 09:50:20 2005//Tati-1-0-branch +/r128_sarea.h/1.4/Wed Apr 20 12:25:22 2005//Tati-1-0-branch +/r128_version.h/1.5/Thu Dec 15 00:21:32 2005//Tati-1-0-branch +/r128_video.c/1.5/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/radeon_accelfuncs.c/1.15/Sun Sep 11 20:58:53 2005//Tati-1-0-branch +/radeon_bios.c/1.6/Fri Dec 9 18:25:02 2005//Tati-1-0-branch +/radeon_dga.c/1.5/Sun Sep 11 20:58:53 2005//Tati-1-0-branch +/radeon_dri.h/1.6/Sun Sep 11 08:51:38 2005//Tati-1-0-branch +/radeon_dripriv.h/1.3/Wed Jun 16 09:43:59 2004//Tati-1-0-branch +/radeon_exa_funcs.c/1.3/Sun Sep 18 02:32:23 2005//Tati-1-0-branch +/radeon_macros.h/1.6/Mon May 23 09:50:20 2005//Tati-1-0-branch +/radeon_mergedfb.c/1.15/Wed Nov 9 17:42:57 2005//Tati-1-0-branch +/radeon_mergedfb.h/1.3/Wed Jun 15 23:40:50 2005//Tati-1-0-branch +/radeon_misc.c/1.4/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/radeon_probe.h/1.8/Wed Apr 20 12:25:22 2005//Tati-1-0-branch +/radeon_sarea.h/1.4/Wed Jan 26 18:23:41 2005//Tati-1-0-branch +/radeon_version.h/1.6/Thu Dec 15 00:21:32 2005//Tati-1-0-branch +/radeon_video.h/1.6/Sun Sep 11 20:58:53 2005//Tati-1-0-branch +/theatre.c/1.5/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/theatre.h/1.4/Wed Apr 20 21:07:44 2005//Tati-1-0-branch +/theatre_module.c/1.3/Mon Jul 11 02:29:45 2005//Tati-1-0-branch +/theatre_reg.h/1.3/Sun Apr 17 23:13:45 2005//Tati-1-0-branch +/.cvsignore/1.1/Mon May 1 03:52:02 2006//Tati-1-0-branch +/Makefile.am/1.10.2.1/Mon May 1 04:33:09 2006//Tati-1-0-branch +/ati.h/1.2.36.1/Mon May 1 03:52:01 2006//Tati-1-0-branch +/atichip.c/1.5/Mon May 1 03:52:02 2006//Tati-1-0-branch +/atichip.h/1.6/Mon May 1 03:52:01 2006//Tati-1-0-branch +/atipciids.h/1.1.2.1/Mon May 1 03:52:02 2006//Tati-1-0-branch +/atipreinit.c/1.9/Mon May 1 03:52:02 2006//Tati-1-0-branch +/ativersion.h/1.3.2.1/Mon May 1 04:33:09 2006//Tati-1-0-branch +/ativga.c/1.6/Mon May 1 03:52:02 2006//Tati-1-0-branch +/r128_dri.c/1.10.2.1/Mon May 1 03:52:02 2006//Tati-1-0-branch +/r128_driver.c/1.22.2.1/Mon May 1 03:52:02 2006//Tati-1-0-branch +/r128_probe.c/1.6.4.1/Mon May 1 03:52:02 2006//Tati-1-0-branch +/radeon.h/1.35.2.3/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_accel.c/1.23/Mon May 1 03:52:02 2006//Tati-1-0-branch +/radeon_chipset.h/1.6/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_common.h/1.8/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_commonfuncs.c/1.2/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_cursor.c/1.10/Mon May 1 03:52:02 2006//Tati-1-0-branch +/radeon_dri.c/1.29.2.4/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_driver.c/1.92.2.17/Result of merge//Tati-1-0-branch +/radeon_exa.c/1.8/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_exa_render.c/1.4/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_mm_i2c.c/1.8.4.1/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_probe.c/1.13.2.1/Mon May 1 03:52:02 2006//Tati-1-0-branch +/radeon_reg.h/1.21.2.4/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_render.c/1.18/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_video.c/1.27.4.4/Mon May 1 03:52:01 2006//Tati-1-0-branch +/radeon_vip.c/1.6.4.1/Mon May 1 03:52:01 2006//Tati-1-0-branch +/theatre200.c/1.5/Mon May 1 03:52:01 2006//Tati-1-0-branch +/theatre200.h/1.5/Mon May 1 03:52:01 2006//Tati-1-0-branch +/theatre200_module.c/1.4/Mon May 1 03:52:01 2006//Tati-1-0-branch +/theatre_detect.c/1.4/Mon May 1 03:52:01 2006//Tati-1-0-branch +/theatre_detect.h/1.3/Mon May 1 03:52:01 2006//Tati-1-0-branch +/theatre_detect_module.c/1.4/Mon May 1 03:52:01 2006//Tati-1-0-branch +D --- xserver-xorg-driver-ati-6.5.7.3.orig/src/CVS/Tag +++ xserver-xorg-driver-ati-6.5.7.3/src/CVS/Tag @@ -0,0 +1 @@ +Tati-1-0-branch --- xserver-xorg-driver-ati-6.5.7.3.orig/src/.cvsignore +++ xserver-xorg-driver-ati-6.5.7.3/src/.cvsignore @@ -0,0 +1,6 @@ +.deps +.libs +Makefile +Makefile.in +*.la +*.lo --- xserver-xorg-driver-ati-6.5.7.3.orig/src/atipciids.h +++ xserver-xorg-driver-ati-6.5.7.3/src/atipciids.h @@ -0,0 +1,294 @@ +/* $XdotOrg: driver/xf86-video-ati/src/atipciids.h,v 1.1.2.1 2006-03-12 06:57:12 benh Exp $ */ + +/* + * Copyright (c) 1995-2003 by The XFree86 Project, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the name of the copyright holder(s) + * and author(s) shall not be used in advertising or otherwise to promote + * the sale, use or other dealings in this Software without prior written + * authorization from the copyright holder(s) and author(s). + */ + +/* + * This file is a replacement for xf86PciInfo.h moving ATI related PCI IDs + * locally to the driver module + */ + +#ifndef _ATIPCIIDS_H +#define _ATIPCIIDS_H + +/* PCI Vendor */ +#define PCI_VENDOR_ATI 0x1002 +#define PCI_VENDOR_AMD 0x1022 +#define PCI_VENDOR_DELL 0x1028 + +/* ATI */ +#define PCI_CHIP_RV380_3150 0x3150 +#define PCI_CHIP_RV380_3151 0x3151 +#define PCI_CHIP_RV380_3152 0x3152 +#define PCI_CHIP_RV380_3153 0x3153 +#define PCI_CHIP_RV380_3154 0x3154 +#define PCI_CHIP_RV380_3156 0x3156 +#define PCI_CHIP_RV380_3E50 0x3E50 +#define PCI_CHIP_RV380_3E51 0x3E51 +#define PCI_CHIP_RV380_3E52 0x3E52 +#define PCI_CHIP_RV380_3E53 0x3E53 +#define PCI_CHIP_RV380_3E54 0x3E54 +#define PCI_CHIP_RV380_3E56 0x3E56 +#define PCI_CHIP_RS100_4136 0x4136 +#define PCI_CHIP_RS200_4137 0x4137 +#define PCI_CHIP_R300_AD 0x4144 +#define PCI_CHIP_R300_AE 0x4145 +#define PCI_CHIP_R300_AF 0x4146 +#define PCI_CHIP_R300_AG 0x4147 +#define PCI_CHIP_R350_AH 0x4148 +#define PCI_CHIP_R350_AI 0x4149 +#define PCI_CHIP_R350_AJ 0x414A +#define PCI_CHIP_R350_AK 0x414B +#define PCI_CHIP_RV350_AP 0x4150 +#define PCI_CHIP_RV350_AQ 0x4151 +#define PCI_CHIP_RV360_AR 0x4152 +#define PCI_CHIP_RV350_AS 0x4153 +#define PCI_CHIP_RV350_AT 0x4154 +#define PCI_CHIP_RV350_4155 0x4155 +#define PCI_CHIP_RV350_AV 0x4156 +#define PCI_CHIP_MACH32 0x4158 +#define PCI_CHIP_RS250_4237 0x4237 +#define PCI_CHIP_R200_BB 0x4242 +#define PCI_CHIP_R200_BC 0x4243 +#define PCI_CHIP_RS100_4336 0x4336 +#define PCI_CHIP_RS200_4337 0x4337 +#define PCI_CHIP_MACH64CT 0x4354 +#define PCI_CHIP_MACH64CX 0x4358 +#define PCI_CHIP_RS250_4437 0x4437 +#define PCI_CHIP_MACH64ET 0x4554 +#define PCI_CHIP_MACH64GB 0x4742 +#define PCI_CHIP_MACH64GD 0x4744 +#define PCI_CHIP_MACH64GI 0x4749 +#define PCI_CHIP_MACH64GL 0x474C +#define PCI_CHIP_MACH64GM 0x474D +#define PCI_CHIP_MACH64GN 0x474E +#define PCI_CHIP_MACH64GO 0x474F +#define PCI_CHIP_MACH64GP 0x4750 +#define PCI_CHIP_MACH64GQ 0x4751 +#define PCI_CHIP_MACH64GR 0x4752 +#define PCI_CHIP_MACH64GS 0x4753 +#define PCI_CHIP_MACH64GT 0x4754 +#define PCI_CHIP_MACH64GU 0x4755 +#define PCI_CHIP_MACH64GV 0x4756 +#define PCI_CHIP_MACH64GW 0x4757 +#define PCI_CHIP_MACH64GX 0x4758 +#define PCI_CHIP_MACH64GY 0x4759 +#define PCI_CHIP_MACH64GZ 0x475A +#define PCI_CHIP_RV250_Id 0x4964 +#define PCI_CHIP_RV250_Ie 0x4965 +#define PCI_CHIP_RV250_If 0x4966 +#define PCI_CHIP_RV250_Ig 0x4967 +#define PCI_CHIP_R420_JH 0x4A48 +#define PCI_CHIP_R420_JI 0x4A49 +#define PCI_CHIP_R420_JJ 0x4A4A +#define PCI_CHIP_R420_JK 0x4A4B +#define PCI_CHIP_R420_JL 0x4A4C +#define PCI_CHIP_R420_JM 0x4A4D +#define PCI_CHIP_R420_JN 0x4A4E +#define PCI_CHIP_R420_4A4F 0x4A4F +#define PCI_CHIP_R420_JP 0x4A50 +#define PCI_CHIP_R420_4A54 0x4A54 +#define PCI_CHIP_R481_4B49 0x4B49 +#define PCI_CHIP_R481_4B4A 0x4B4A +#define PCI_CHIP_R481_4B4B 0x4B4B +#define PCI_CHIP_R481_4B4C 0x4B4C +#define PCI_CHIP_MACH64LB 0x4C42 +#define PCI_CHIP_MACH64LD 0x4C44 +#define PCI_CHIP_RAGE128LE 0x4C45 +#define PCI_CHIP_RAGE128LF 0x4C46 +#define PCI_CHIP_MACH64LG 0x4C47 +#define PCI_CHIP_MACH64LI 0x4C49 +#define PCI_CHIP_MACH64LM 0x4C4D +#define PCI_CHIP_MACH64LN 0x4C4E +#define PCI_CHIP_MACH64LP 0x4C50 +#define PCI_CHIP_MACH64LQ 0x4C51 +#define PCI_CHIP_MACH64LR 0x4C52 +#define PCI_CHIP_MACH64LS 0x4C53 +#define PCI_CHIP_RADEON_LW 0x4C57 +#define PCI_CHIP_RADEON_LX 0x4C58 +#define PCI_CHIP_RADEON_LY 0x4C59 +#define PCI_CHIP_RADEON_LZ 0x4C5A +#define PCI_CHIP_RV250_Ld 0x4C64 +#define PCI_CHIP_RV250_Le 0x4C65 +#define PCI_CHIP_RV250_Lf 0x4C66 +#define PCI_CHIP_RV250_Lg 0x4C67 +#define PCI_CHIP_RV250_Ln 0x4C6E +#define PCI_CHIP_RAGE128MF 0x4D46 +#define PCI_CHIP_RAGE128ML 0x4D4C +#define PCI_CHIP_R300_ND 0x4E44 +#define PCI_CHIP_R300_NE 0x4E45 +#define PCI_CHIP_R300_NF 0x4E46 +#define PCI_CHIP_R300_NG 0x4E47 +#define PCI_CHIP_R350_NH 0x4E48 +#define PCI_CHIP_R350_NI 0x4E49 +#define PCI_CHIP_R360_NJ 0x4E4A +#define PCI_CHIP_R350_NK 0x4E4B +#define PCI_CHIP_RV350_NP 0x4E50 +#define PCI_CHIP_RV350_NQ 0x4E51 +#define PCI_CHIP_RV350_NR 0x4E52 +#define PCI_CHIP_RV350_NS 0x4E53 +#define PCI_CHIP_RV350_NT 0x4E54 +#define PCI_CHIP_RV350_NV 0x4E56 +#define PCI_CHIP_RAGE128PA 0x5041 +#define PCI_CHIP_RAGE128PB 0x5042 +#define PCI_CHIP_RAGE128PC 0x5043 +#define PCI_CHIP_RAGE128PD 0x5044 +#define PCI_CHIP_RAGE128PE 0x5045 +#define PCI_CHIP_RAGE128PF 0x5046 +#define PCI_CHIP_RAGE128PG 0x5047 +#define PCI_CHIP_RAGE128PH 0x5048 +#define PCI_CHIP_RAGE128PI 0x5049 +#define PCI_CHIP_RAGE128PJ 0x504A +#define PCI_CHIP_RAGE128PK 0x504B +#define PCI_CHIP_RAGE128PL 0x504C +#define PCI_CHIP_RAGE128PM 0x504D +#define PCI_CHIP_RAGE128PN 0x504E +#define PCI_CHIP_RAGE128PO 0x504F +#define PCI_CHIP_RAGE128PP 0x5050 +#define PCI_CHIP_RAGE128PQ 0x5051 +#define PCI_CHIP_RAGE128PR 0x5052 +#define PCI_CHIP_RAGE128PS 0x5053 +#define PCI_CHIP_RAGE128PT 0x5054 +#define PCI_CHIP_RAGE128PU 0x5055 +#define PCI_CHIP_RAGE128PV 0x5056 +#define PCI_CHIP_RAGE128PW 0x5057 +#define PCI_CHIP_RAGE128PX 0x5058 +#define PCI_CHIP_RADEON_QD 0x5144 +#define PCI_CHIP_RADEON_QE 0x5145 +#define PCI_CHIP_RADEON_QF 0x5146 +#define PCI_CHIP_RADEON_QG 0x5147 +#define PCI_CHIP_R200_QH 0x5148 +#define PCI_CHIP_R200_QI 0x5149 +#define PCI_CHIP_R200_QJ 0x514A +#define PCI_CHIP_R200_QK 0x514B +#define PCI_CHIP_R200_QL 0x514C +#define PCI_CHIP_R200_QM 0x514D +#define PCI_CHIP_R200_QN 0x514E +#define PCI_CHIP_R200_QO 0x514F +#define PCI_CHIP_RV200_QW 0x5157 +#define PCI_CHIP_RV200_QX 0x5158 +#define PCI_CHIP_RV100_QY 0x5159 +#define PCI_CHIP_RV100_QZ 0x515A +#define PCI_CHIP_RN50_515E 0x515E +#define PCI_CHIP_RAGE128RE 0x5245 +#define PCI_CHIP_RAGE128RF 0x5246 +#define PCI_CHIP_RAGE128RG 0x5247 +#define PCI_CHIP_RAGE128RK 0x524B +#define PCI_CHIP_RAGE128RL 0x524C +#define PCI_CHIP_RAGE128SE 0x5345 +#define PCI_CHIP_RAGE128SF 0x5346 +#define PCI_CHIP_RAGE128SG 0x5347 +#define PCI_CHIP_RAGE128SH 0x5348 +#define PCI_CHIP_RAGE128SK 0x534B +#define PCI_CHIP_RAGE128SL 0x534C +#define PCI_CHIP_RAGE128SM 0x534D +#define PCI_CHIP_RAGE128SN 0x534E +#define PCI_CHIP_RAGE128TF 0x5446 +#define PCI_CHIP_RAGE128TL 0x544C +#define PCI_CHIP_RAGE128TR 0x5452 +#define PCI_CHIP_RAGE128TS 0x5453 +#define PCI_CHIP_RAGE128TT 0x5454 +#define PCI_CHIP_RAGE128TU 0x5455 +#define PCI_CHIP_RV370_5460 0x5460 +#define PCI_CHIP_RV370_5461 0x5461 +#define PCI_CHIP_RV370_5462 0x5462 +#define PCI_CHIP_RV370_5463 0x5463 +#define PCI_CHIP_RV370_5464 0x5464 +#define PCI_CHIP_RV370_5465 0x5465 +#define PCI_CHIP_RV370_5466 0x5466 +#define PCI_CHIP_RV370_5467 0x5467 +#define PCI_CHIP_R423_UH 0x5548 +#define PCI_CHIP_R423_UI 0x5549 +#define PCI_CHIP_R423_UJ 0x554A +#define PCI_CHIP_R423_UK 0x554B +#define PCI_CHIP_R430_554C 0x554C +#define PCI_CHIP_R430_554D 0x554D +#define PCI_CHIP_R430_554E 0x554E +#define PCI_CHIP_R430_554F 0x554F +#define PCI_CHIP_R423_5550 0x5550 +#define PCI_CHIP_R423_UQ 0x5551 +#define PCI_CHIP_R423_UR 0x5552 +#define PCI_CHIP_R423_UT 0x5554 +#define PCI_CHIP_RV410_564A 0x564A +#define PCI_CHIP_RV410_564B 0x564B +#define PCI_CHIP_RV410_564F 0x564F +#define PCI_CHIP_RV410_5652 0x5652 +#define PCI_CHIP_RV410_5653 0x5653 +#define PCI_CHIP_MACH64VT 0x5654 +#define PCI_CHIP_MACH64VU 0x5655 +#define PCI_CHIP_MACH64VV 0x5656 +#define PCI_CHIP_RS300_5834 0x5834 +#define PCI_CHIP_RS300_5835 0x5835 +#define PCI_CHIP_RS300_5836 0x5836 +#define PCI_CHIP_RS300_5837 0x5837 +#define PCI_CHIP_RS480_5954 0x5954 +#define PCI_CHIP_RS480_5955 0x5955 +#define PCI_CHIP_RV280_5960 0x5960 +#define PCI_CHIP_RV280_5961 0x5961 +#define PCI_CHIP_RV280_5962 0x5962 +#define PCI_CHIP_RV280_5964 0x5964 +#define PCI_CHIP_RV280_5965 0x5965 +#define PCI_CHIP_RN50_5969 0x5969 +#define PCI_CHIP_RS482_5974 0x5974 +#define PCI_CHIP_RS482_5975 0x5975 +#define PCI_CHIP_RS400_5A41 0x5A41 +#define PCI_CHIP_RS400_5A42 0x5A42 +#define PCI_CHIP_RC410_5A61 0x5A61 +#define PCI_CHIP_RC410_5A62 0x5A62 +#define PCI_CHIP_RV370_5B60 0x5B60 +#define PCI_CHIP_RV370_5B61 0x5B61 +#define PCI_CHIP_RV370_5B62 0x5B62 +#define PCI_CHIP_RV370_5B63 0x5B63 +#define PCI_CHIP_RV370_5B64 0x5B64 +#define PCI_CHIP_RV370_5B65 0x5B65 +#define PCI_CHIP_RV370_5B66 0x5B66 +#define PCI_CHIP_RV370_5B67 0x5B67 +#define PCI_CHIP_RV280_5C61 0x5C61 +#define PCI_CHIP_RV280_5C63 0x5C63 +#define PCI_CHIP_R430_5D48 0x5D48 +#define PCI_CHIP_R430_5D49 0x5D49 +#define PCI_CHIP_R430_5D4A 0x5D4A +#define PCI_CHIP_R480_5D4C 0x5D4C +#define PCI_CHIP_R480_5D4D 0x5D4D +#define PCI_CHIP_R480_5D4E 0x5D4E +#define PCI_CHIP_R480_5D4F 0x5D4F +#define PCI_CHIP_R480_5D50 0x5D50 +#define PCI_CHIP_R480_5D52 0x5D52 +#define PCI_CHIP_R423_5D57 0x5D57 +#define PCI_CHIP_RV410_5E48 0x5E48 +#define PCI_CHIP_RV410_5E4A 0x5E4A +#define PCI_CHIP_RV410_5E4B 0x5E4B +#define PCI_CHIP_RV410_5E4C 0x5E4C +#define PCI_CHIP_RV410_5E4D 0x5E4D +#define PCI_CHIP_RV410_5E4F 0x5E4F +#define PCI_CHIP_RS350_7834 0x7834 +#define PCI_CHIP_RS350_7835 0x7835 + +/* Misc */ +#define PCI_CHIP_AMD761 0x700E + +#endif /* _ATIPCIIDS_H */ --- xserver-xorg-driver-ati-6.5.7.3.orig/README.ati.sgml +++ xserver-xorg-driver-ati-6.5.7.3/README.ati.sgml @@ -15,7 +15,7 @@ -$Id: README.ati.sgml,v 1.3 2005/12/19 09:07:50 alanc Exp $ +$Id: ati.sgml,v 1.3 2005/12/19 07:56:55 alanc Exp $ Based on XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/ati.sgml,v 3.42 2003/01/20 03:43:07 dawes Exp --- xserver-xorg-driver-ati-6.5.7.3.orig/README.ati +++ xserver-xorg-driver-ati-6.5.7.3/README.ati @@ -1,7 +1,6 @@ - $Id: README.ati.sgml,v 1.3 2005/12/19 09:07:50 alanc Exp $ - Based on XFree86: - xc/programs/Xserver/hw/xfree86/doc/sgml/ati.sgml,v 3.42 - 2003/01/20 03:43:07 dawes Exp ATI Adapters README file + $Id: ati.sgml,v 1.2 2004/04/23 19:23:59 eich Exp $ Based on + XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/ati.sgml,v + 3.42 2003/01/20 03:43:07 dawes Exp ATI Adapters README file Marc Aurele La France 2002 February 12 @@ -48,47 +47,43 @@ ______________________________________________________________________ - 11.. SSttaatteemmeenntt ooff iinntteenntt - - Generally speaking, the driver is intended for all ATI video adapters - based on the Mach64 series or older chipsets, providing maximum video - function within hardware limitations. The driver is also intended to - optionally provide the same level of support for generic VGA or 8514/A - adapters. The newer Rage 128 and Radeon chips are not yet supported - by this driver. Rage 128's and Radeon's are, however, supported by - separate drivers, and owners of such adapters should consult the - documentation provided with these drivers. This driver will also - invoke the appropriate driver if it finds Rage 128 and/or Radeon - adapter(s) in the system. This driver is still being actively - developed, meaning that it currently does not yet fully meet these - goals. + 1. Statement of intent + Generally speaking, the driver is intended for all ATI video adapters, + providing maximum video function within hardware limitations. The + driver is also intended to optionally provide the same level of + support for generic VGA or 8514/A adapters. This driver is still + being actively developed, meaning that it currently does not yet fully + meet these goals. The driver will provide - +o accelerated support if an ATI accelerator is detected _a_n_d the user + +o accelerated support if an ATI accelerator is detected and the user has not requested that this support be disabled; otherwise +o accelerated support if a non-ATI 8514/A-capable adapter is detected - _a_n_d the user has requested such support; otherwise + and the user has requested such support; otherwise +o unaccelerated SuperVGA support if an ATI VGA-capable adapter is detected; otherwise +o generic VGA support if a non-ATI VGA-capable adapter is detected - _a_n_d the user has requested such support. + and the user has requested such support. Thus, the level of support provided not only depends on what the driver detects in the system, but also, on what the user specifies - in the xorg.conf file. See the ````xxoorrgg..ccoonnff ssppeecciiffiiccaattiioonnss'''' + in the xorg.conf file. See the ``xorg.conf specifications'' section below for details. If none of the above conditions are met, the ATI driver will essentially disable itself to allow other drivers to examine the system. + Note that I am currently considering removing the driver's support for + generic VGA. If you have any concerns about this, please contact me + at . - 22.. AA nnoottee oonn aacccceelleerraattiioonn + 2. A note on acceleration The meaning of ``acceleration'', as used in this document, needs to be clarified. Two of the many components in an accelerator are the CRT @@ -113,7 +108,7 @@ implies the use of the accelerator's CRTC. - 33.. CCuurrrreenntt iimmpplleemmeennttaattiioonn ffoorr AATTII aaddaapptteerrss + 3. Current implementation for ATI adapters The driver currently supports the SuperVGA capabilities of all ATI adapters except some early Mach8 and Mach32 adapters that do not @@ -134,6 +129,7 @@ and 3D Rage series of adapters using the accelerator CRTC (but not the VGA CRTC). + The newer Rage 128 and Radeon chips are not yet supported by this driver. Rage 128's and Radeon's are, however, supported by separate drivers, and owners of such adapters should consult the documentation @@ -185,7 +181,7 @@ and SuperVGA functionality, but the driver currently only uses the VGA. - The driver _d_o_e_s however support the accelerator CRTC present in all + The driver does however support the accelerator CRTC present in all ATI Mach64 adapters. For 256-colour, and higher depth modes, this support will be used by default, although an xorg.conf option can be specified to use the SuperVGA CRTC instead. A linear video memory @@ -195,7 +191,6 @@ are available to disable this aperture, or (for non-PCI adapters) enable it or move it to some other address. - By default, the driver provides some acceleration for Mach64 if the accelerator CRTC is used, and modes whose colour depth greater than or equal to 8 are to be used. This support is as yet incomplete and can @@ -205,7 +200,7 @@ Mach64 adapters. - 44.. CCuurrrreenntt iimmpplleemmeennttaattiioonn ooff ggeenneerriicc VVGGAA ssuuppppoorrtt ffoorr nnoonn--AATTII aaddaapptteerrss + 4. Current implementation of generic VGA support for non-ATI adapters Support for generic VGA with non-ATI adapters is also implemented, but has undergone only limited testing. The driver will intentionally @@ -233,7 +228,7 @@ +o Colour depths higher than 8 are not available. - 55.. xxoorrgg..ccoonnff ssppeecciiffiiccaattiioonnss + 5. xorg.conf specifications The driver recognises a number of xorg.conf options. In general, all such options should be specified in a ``Device'' section, and affect @@ -252,7 +247,7 @@ assigned to the ``Device'' section which contains them. - 55..11.. DDrriivveerr ````aattii'''' + 5.1. Driver ``ati'' The use of this specification is highly recommended if the ``Device'' section is to be recognised by the driver. In fact, it is almost (but @@ -261,26 +256,25 @@ ``Device'' section. + 5.2. ChipSet ``name'' - 55..22.. CChhiippSSeett ````nnaammee'''' - - The default ChipSet name for this driver is ``_a_t_i''. In this case, + The default ChipSet name for this driver is ``ati''. In this case, any ATI adapter can be associated with the ``Device'' section. If an ATI accelerator is detected and the driver supports it, the accelerator's CRTC will be used to drive the screen. Otherwise, the driver will programme the adapter's SuperVGA CRTC. - If ``_a_t_i_v_g_a'' is specified instead, the driver will ignore any ATI - accelerator it detects, but otherwise operate as if ``_a_t_i'' had been + If ``ativga'' is specified instead, the driver will ignore any ATI + accelerator it detects, but otherwise operate as if ``ati'' had been specified. This specification ensures the VGA CRTC is used. - A ChipSet name of ``_i_b_m_v_g_a'' causes any VGA-capable adapter in the + A ChipSet name of ``ibmvga'' causes any VGA-capable adapter in the system to be associated with the ``Device'' section. It enables the driver's generic VGA support, but only for non-ATI adapters. If an ATI adapter is associated with the ``Device'' section, the driver will - operate as if ``_a_t_i_v_g_a'' had been specified instead. + operate as if ``ativga'' had been specified instead. - A ChipSet name of ``_v_g_a_w_o_n_d_e_r'' is equivalent to ``_a_t_i_v_g_a'', except + A ChipSet name of ``vgawonder'' is equivalent to ``ativga'', except that only VGAWonder-capable adapters can be assigned to the ``Device'' section. This specifically excludes the newer integrated Mach64 controllers. @@ -292,16 +286,16 @@ lockup would occur, it will skip the probe. In some situations, this determination cannot be accurate, and the driver will err on the side of caution, skipping the probe. Specifying a ChipSet name of - ``_m_a_c_h_3_2'' or ``_m_a_c_h_6_4'', as appropriate, will force the driver to + ``mach32'' or ``mach64'', as appropriate, will force the driver to probe for the non-PCI adapter. These ChipSet names should, therefore, only be used when there is in fact such an adapter in the system. - They are otherwise equivalent to ``_a_t_i''. + They are otherwise equivalent to ``ati''. - On non-Intel platforms, only ``_a_t_i'' and ``_m_a_c_h_6_4'' ChipSet values are + On non-Intel platforms, only ``ati'' and ``mach64'' ChipSet values are operative. - 55..33.. CChhiippIIDD && CChhiippRReevv ssppeecciiffiiccaattiioonnss + 5.3. ChipID & ChipRev specifications These specifications will cause the driver to associate the ``Device'' section only with an adapter having the same attributes, or an adapter @@ -314,7 +308,7 @@ specified in the same ``Device'' section. - 55..44.. IIOOBBaassee + 5.4. IOBase This option limits the adapters that can be associated with the ``Device'' section to the one with the specified I/O base. This @@ -322,27 +316,28 @@ adapters. - 55..55.. BBuussIIDD + 5.5. BusID This option limits the adapters that can be associated with the ``Device'' section to the one with the specified PCI Bus ID. This specification excludes non-PCI adapters. - 55..66.. CClloocckkss + + 5.6. Clocks For the purpose of specifying a clock line in your xorg.conf, one of four different situations can occur, as follows. Those configuring the driver's generic VGA support for a non-ATI - adapter, can skip ahead to the ````CClloocckkss ffoorr nnoonn--AATTII aaddaapptteerrss'''' section - below. Those _n_o_t trying to configure the driver for a Mach64 adapter, - can skip ahead to the ````CClloocckkss ffoorr ffiixxeedd cclloocckk ggeenneerraattoorrss oonn AATTII - aaddaapptteerrss'''' section below. + adapter, can skip ahead to the ``Clocks for non-ATI adapters'' section + below. Those not trying to configure the driver for a Mach64 adapter, + can skip ahead to the ``Clocks for fixed clock generators on ATI + adapters'' section below. The very earliest Mach64 adapters use fixed (i.e. non-programmable) clock generators. Very few of these (mostly prototypes) are known to exist, but if you have one of these, you can also skip ahead to the - ````CClloocckkss ffoorr ffiixxeedd cclloocckk ggeenneerraattoorrss oonn AATTII aaddaapptteerrss'''' section below. + ``Clocks for fixed clock generators on ATI adapters'' section below. The two cases that are left deal with programmable clock generators, which are used on the great majority of Mach64 adapters. @@ -351,7 +346,7 @@ run a clock probe with the command ``X -probeonly''. - 55..66..11.. CClloocckkss ffoorr ssuuppppoorrtteedd pprrooggrraammmmaabbllee cclloocckk ggeenneerraattoorrss + 5.6.1. Clocks for supported programmable clock generators At bootup, video BIOS initialisation programmes an initial set of frequencies. Two of these are reserved to allow the setting of modes @@ -367,7 +362,7 @@ generator as needed by the modes used during the X session. - 55..66..22.. CClloocckkss ffoorr uunnssuuppppoorrtteedd pprrooggrraammmmaabbllee cclloocckk ggeenneerraattoorrss + 5.6.2. Clocks for unsupported programmable clock generators This case is unlikely to occur, but is documented for the sake of completeness. @@ -394,6 +389,7 @@ 0.000 40.000 37.500 32.500 20.000 22.450 24.750 25.000 + BIOS setting 3: Clocks 0.000 0.000 0.000 0.000 25.180 28.320 0.000 0.000 @@ -403,10 +399,10 @@ If the driver matches the clocks to the third setting above, function- - ality will be _e_x_t_r_e_m_e_l_y limited (assuming the driver works at all). + ality will be extremely limited (assuming the driver works at all). - 55..66..33.. CClloocckkss ffoorr ffiixxeedd cclloocckk ggeenneerraattoorrss oonn AATTII aaddaapptteerrss + 5.6.3. Clocks for fixed clock generators on ATI adapters This section applies to all VGAWonder and Mach32 adapters, and to early Mach64 prototypes. @@ -482,13 +478,13 @@ all be said to be clones of one of the above) might generate non-zero frequencies for those that are zero above, or vice-versa. - The order of the clocks _i_s very important, although the driver will + The order of the clocks is very important, although the driver will reorder the specified clocks if it deems it appropriate to do so. Mach32 and Mach64 owners should note that this order is different than what they would use for previous accelerated servers. - 55..66..44.. CClloocckkss ffoorr nnoonn--AATTII aaddaapptteerrss + 5.6.4. Clocks for non-ATI adapters If no clocks are specified in the xorg.conf, the driver will probe for four clocks, the second of which will be assumed to be 28.322 MHz. @@ -498,7 +494,7 @@ will be ignored. - 55..77.. OOppttiioonn ````nnooppaanneell__ddiissppllaayy'''' + 5.7. Option ``nopanel_display'' This specification is only effective when the driver detects that the adapter's BIOS has initialised both the digital flat panel and CRT @@ -509,14 +505,14 @@ than the panel can handle. - 55..88.. OOppttiioonn ````ccrrtt__ddiissppllaayy'''' + 5.8. Option ``crt_display'' This specification is only effective when the driver detects that the adapter's BIOS has initialised the digital flat panel interface, but has disabled the CRT interface. In such a situation the driver will normally drive only the panel. This specification causes the driver to instead display the same image on both the panel and the CRT. - 55..99.. OOppttiioonn ````nnooaacccceell'''' + 5.9. Option ``noaccel'' By default, the driver will accelerate draw operations if a Mach64 CRTC is used to drive the display. As implemented in this driver, @@ -524,7 +520,7 @@ option disables this acceleration. - 55..1100.. OOppttiioonn ````nnoolliinneeaarr'''' + 5.10. Option ``nolinear'' By default, the driver will enable a linear video memory aperture for 256-colour and higher depth modes if it is also using a Mach64 @@ -535,20 +531,20 @@ this option is ignored. - 55..1111.. OOppttiioonn ````HHWWCCuurrssoorr'''' aanndd OOppttiioonn ````SSWWCCuurrssoorr'''' + 5.11. Option ``HWCursor'' and Option ``SWCursor'' - Option _`_`_H_W_C_u_r_s_o_r_'_', which is the default, specifies that hardware + Option ``HWCursor'', which is the default, specifies that hardware facilities are to be used to paint the mouse pointer on the screen. - Option _`_`_S_W_C_u_r_s_o_r_'_' specifies that the mouse pointer is to be drawn by + Option ``SWCursor'' specifies that the mouse pointer is to be drawn by software, which is much slower. If both options are specified, option - _`_`_S_W_C_u_r_s_o_r_'_' prevails. Currently, these options are only acted upon + ``SWCursor'' prevails. Currently, these options are only acted upon for 256-colour or higher depth modes, if a Mach64 accelerator CRTC, or a Mach64 integrated controller is being used. In all other situations, a software cursor will be used, regardless of what these options specify. - 55..1122.. OOppttiioonn ````SSiillkkeennMMoouussee'''' + 5.12. Option ``SilkenMouse'' This option is only acted upon when a hardware cursor is being used. It specifies that the cursor's position on the screen is to be updated @@ -557,7 +553,7 @@ when the X server is very busy. - 55..1133.. OOppttiioonn ````sshhaaddoowwffbb'''' + 5.13. Option ``shadowfb'' If this option is enabled, the driver will cause the CPU to do each drawing operation first into a shadow frame buffer in system virtual @@ -574,14 +570,14 @@ frame buffer depth is less than 8, or when acceleration is used. - 55..1144.. OOppttiioonn ````ddppmmss'''' + 5.14. Option ``dpms'' This option enables the driver's support for VESA's Display Power Management Specification. - 55..1155.. OOppttiioonn ````bbaacckkiinnggssttoorree'''' + 5.15. Option ``backingstore'' This is not specifically a driver option. It is used to enable the server's support for backing store, a mechanism by which pixel data @@ -590,7 +586,7 @@ needs to be redisplayed. - 55..1166.. MMeemmBBaassee aaddddrreessss + 5.16. MemBase address This specification is only effective for non-PCI Mach64 adapters, and is used to override the CPU address at which the adapter will map its @@ -605,7 +601,7 @@ driver can not easily change the linear aperture address. - 55..1177.. OOppttiioonn ````RReeffeerreenncceeCClloocckk'''' ````ffrreeqquueennccyy'''' + 5.17. Option ``ReferenceClock'' ``frequency'' This option is only applicable to non-Intel platforms, where an adapter BIOS is not available to the driver. The option specifies the @@ -614,23 +610,23 @@ MHz. - 55..1188.. CClloocckkCChhiipp ````nnaammee'''' + 5.18. ClockChip ``name'' This option is only applicable to non-Intel platforms, where an adapter BIOS is not available to the driver, and the driver cannot reliably determine whether the clock generator the adapter uses is a variant of an ATI 18818 (a.k.a. ICS 2595) or an unsupported clock - generator. The only values that are acted upon are _`_`_A_T_I _1_8_8_1_8_-_0_'_' or - _`_`_A_T_I _1_8_8_1_8_-_1_'_'. From this specification, the driver derives a + generator. The only values that are acted upon are ``ATI 18818-0'' or + ``ATI 18818-1''. From this specification, the driver derives a reference divider of 43 or 46 (respectively) for use in clock programming calculations. The driver's default behaviour, in this case, is to assume an unsupported clock generator, which means it will treat it as a fixed-frequency clock generator, as described under the - heading ````CClloocckkss ffoorr uunnssuuppppoorrtteedd pprrooggrraammmmaabbllee cclloocckk ggeenneerraattoorrss'''' + heading ``Clocks for unsupported programmable clock generators'' above. - 66.. VViiddeeoo mmooddeess + 6. Video modes Mode timings can be derived from the information in X's doc subdirectory. However, it is no longer required to specify such @@ -650,11 +646,11 @@ For a digital flat panel, any sync tolerances should be removed from the corresponding ``Monitor'' section. The driver will automatically calculate these from the mode that is active on server entry. The - driver also inserts timings for a mode called _"_N_a_t_i_v_e _p_a_n_e_l _m_o_d_e_" that + driver also inserts timings for a mode called "Native panel mode" that represents the panel's native resolution. - 77.. KKnnoowwnn pprroobblleemmss aanndd lliimmiittaattiioonnss + 7. Known problems and limitations There are several known problems or limitations related to the ATI driver. They include: @@ -753,11 +749,11 @@ +o 3D operations. - 88.. RReeppoorrttiinngg pprroobblleemmss + 8. Reporting problems If you are experiencing problems that are not already recorded in this document, first ensure that you have the latest current release of - this driver and the Xorg X server. Check the server's log (usually + this driver and the Xorg X server.. Check the server's log (usually found in /var/log/Xorg.0.log) and ftp://ftp.freedesktop.org/pub/Xorg if you are uncertain. @@ -765,23 +761,20 @@ information. Thirdly, a scan through the comp.windows.x.i386unix and - comp.os.linux.x newsgroups, the xorg mailing list archives at - http://lists.freedesktop.org/mailman/listinfo/xorg, and the Xorg bug - database at https://bugs.freedesktop.org/enter_bug.cgi?product=xorg - can also prove useful in resolving problems. + comp.os.linux.x newsgroups and the xorg mailing list using your + favourite archiving service can also prove useful in resolving + problems. - If you are still experiencing problems, you can send _n_o_n_-_H_T_M_L_i_s_e_d e- - mail to . Please be as specific as - possible when describing the problem(s), and include an _u_n_e_d_i_t_e_d copy - of the server's log and the xorg.conf file used. + If you are still experiencing problems, you can send me non-HTMLised + e-mail at . Please be as specific as possible when + describing the problem(s), and include an unedited copy of the + server's log and the xorg.conf file used. - - 99.. DDrriivveerr hhiissttoorryy + 9. Driver history The complete history of the driver is rather cloudy. The following is more than likely to be incomplete and inaccurate. - Apparently, Per Lindqvist first got a driver working with an early ATI adapter under X386 1.1a. This original driver might have actually been based on a non-functional ATI driver written by Thomas Roell @@ -795,12 +788,12 @@ 1992 and ported the code to the X386 part of X11R5. This subsequently became part of XFree86. - Marc Aurele La France took over development and maintenance of the + I (Marc Aurele La France) took over development and maintenance of the driver in the fall of 1993 after Rik got rid of his VGA Wonder adapter. - 1100.. DDrriivveerr vveerrssiioonnss + 10. Driver versions Due to the introduction of loadable drivers in XFree86 4.0, it has become necessary to track driver versions separately. Driver releases --- xserver-xorg-driver-ati-6.5.7.3.orig/ltmain.sh +++ xserver-xorg-driver-ati-6.5.7.3/ltmain.sh @@ -1,7 +1,7 @@ # ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun configure. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # @@ -17,7 +17,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -33,9 +33,6 @@ # function. progpath="$0" -# RH: define SED for historic ltconfig's generated by Libtool 1.3 -[ -z "$SED" ] && SED=sed - # The name of this program: progname=`echo "$progpath" | $SED $basename` modename="$progname" @@ -46,9 +43,14 @@ PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=1.5.6 -TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42)" +VERSION="1.5.22 Debian 1.5.22-2" +TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes. +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi # Check that we have a working $echo. if test "X$1" = X--no-reexec; then @@ -86,14 +88,15 @@ Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' # test EBCDIC or ASCII -case `echo A|tr A '\301'` in - A) # EBCDIC based system - SP2NL="tr '\100' '\n'" - NL2SP="tr '\r\n' '\100\100'" +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + SP2NL='tr \040 \012' + NL2SP='tr \015\012 \040\040' ;; - *) # Assume ASCII based system - SP2NL="tr '\040' '\012'" - NL2SP="tr '\015\012' '\040\040'" + *) # EBCDIC based system + SP2NL='tr \100 \n' + NL2SP='tr \r\n \100\100' ;; esac @@ -110,8 +113,9 @@ fi # Make sure IFS has a sensible default -: ${IFS=" -"} +lt_nl=' +' +IFS=" $lt_nl" if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then $echo "$modename: not configured to build any kind of library" 1>&2 @@ -128,6 +132,8 @@ show="$echo" show_help= execute_dlfiles= +duplicate_deps=no +preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" @@ -135,13 +141,51 @@ # Shell function definitions: # This seems to be the best place for them +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $mkdir "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || { + $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 + exit $EXIT_FAILURE + } + fi + + $echo "X$my_tmpdir" | $Xsed +} + + # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. -func_win32_libid () { +func_win32_libid () +{ win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in @@ -152,12 +196,11 @@ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then win32_nmres=`eval $NM -f posix -A $1 | \ - sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` - if test "X$win32_nmres" = "Ximport" ; then - win32_libid_type="x86 archive import" - else - win32_libid_type="x86 archive static" - fi + $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac fi ;; *DLL*) @@ -181,7 +224,8 @@ # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' -func_infer_tag () { +func_infer_tag () +{ if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do @@ -238,12 +282,116 @@ esac fi } + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + + $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" + $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 + exit $EXIT_FAILURE + fi +} + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + my_status="" + + $show "${rm}r $my_gentop" + $run ${rm}r "$my_gentop" + $show "$mkdir $my_gentop" + $run $mkdir "$my_gentop" + my_status=$? + if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then + exit $my_status + fi + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` + my_xdir="$my_gentop/$my_xlib" + + $show "${rm}r $my_xdir" + $run ${rm}r "$my_xdir" + $show "$mkdir $my_xdir" + $run $mkdir "$my_xdir" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then + exit $exit_status + fi + case $host in + *-darwin*) + $show "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + if test -z "$run"; then + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` + darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` + if test -n "$darwin_arches"; then + darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + $show "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we have a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + lipo -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + ${rm}r unfat-$$ + cd "$darwin_orig_dir" + else + cd "$darwin_orig_dir" + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + fi # $run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + func_extract_archives_result="$my_oldobjs" +} # End of Shell function definitions ##################################### # Darwin sucks eval std_shrext=\"$shrext_cmds\" +disable_libs=no + # Parse our command line options once, thoroughly. while test "$#" -gt 0 do @@ -308,10 +456,10 @@ --version) $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" $echo - $echo "Copyright (C) 2003 Free Software Foundation, Inc." + $echo "Copyright (C) 2005 Free Software Foundation, Inc." $echo "This is free software; see the source for copying conditions. There is NO" $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - exit $EXIT_SUCCESS + exit $? ;; --config) @@ -320,7 +468,7 @@ for tagname in $taglist; do ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" done - exit $EXIT_SUCCESS + exit $? ;; --debug) @@ -345,7 +493,7 @@ else $echo "disable static libraries" fi - exit $EXIT_SUCCESS + exit $? ;; --finish) mode="finish" ;; @@ -360,7 +508,11 @@ preserve_args="$preserve_args $arg" ;; - --tag) prevopt="--tag" prev=tag ;; + --tag) + prevopt="--tag" + prev=tag + preserve_args="$preserve_args --tag" + ;; --tag=*) set tag "$optarg" ${1+"$@"} shift @@ -392,6 +544,18 @@ exit $EXIT_FAILURE fi +case $disable_libs in +no) + ;; +shared) + build_libtool_libs=no + build_old_libs=yes + ;; +static) + build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` + ;; +esac + # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. @@ -402,7 +566,7 @@ # Infer the operation mode. if test -z "$mode"; then $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 - $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2 + $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 case $nonopt in *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) mode=link @@ -468,7 +632,7 @@ for arg do - case "$arg_mode" in + case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" @@ -550,7 +714,10 @@ case $lastarg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. + # in scan sets, and some SunOS ksh mistreat backslash-escaping + # in scan sets (worked around with variable expansion), + # and furthermore cannot handle '|' '&' '(' ')' in scan sets + # at all, so we specify them separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; @@ -624,6 +791,14 @@ esac done + qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` + case $qlibobj in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qlibobj="\"$qlibobj\"" ;; + esac + test "X$libobj" != "X$qlibobj" \ + && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then @@ -696,12 +871,17 @@ $run $rm $removelist exit $EXIT_FAILURE fi - $echo $srcfile > "$lockfile" + $echo "$srcfile" > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi + qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` + case $qsrcfile in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qsrcfile="\"$qsrcfile\"" ;; + esac $run $rm "$libobj" "${libobj}T" @@ -723,18 +903,18 @@ fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then - command="$base_compile $srcfile $pic_flag" + command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code - command="$base_compile $srcfile" + command="$base_compile $qsrcfile" fi if test ! -d "${xdir}$objdir"; then $show "$mkdir ${xdir}$objdir" $run $mkdir ${xdir}$objdir - status=$? - if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then - exit $status + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then + exit $exit_status fi fi @@ -806,9 +986,9 @@ if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code - command="$base_compile $srcfile" + command="$base_compile $qsrcfile" else - command="$base_compile $srcfile $pic_flag" + command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then command="$command -o $obj" @@ -937,6 +1117,7 @@ no_install=no objs= non_pic_objects= + notinst_path= # paths that contain not-installed libtool libraries precious_files_regex= prefer_static_libs=no preload=no @@ -965,14 +1146,15 @@ if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi + prefer_static_libs=yes else if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi + prefer_static_libs=built fi build_libtool_libs=no build_old_libs=yes - prefer_static_libs=yes break ;; esac @@ -1147,6 +1329,11 @@ if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" fi else # Only an error if not doing a dry-run. @@ -1230,6 +1417,13 @@ prev= continue ;; + darwin_framework|darwin_framework_skip) + test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + prev= + continue + ;; *) eval "$prev=\"\$arg\"" prev= @@ -1288,6 +1482,18 @@ continue ;; + -framework|-arch|-isysroot) + case " $CC " in + *" ${arg} ${1} "* | *" ${arg} ${1} "*) + prev=darwin_framework_skip ;; + *) compiler_flags="$compiler_flags $arg" + prev=darwin_framework ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + -inst-prefix-dir) prev=inst_prefix continue @@ -1314,7 +1520,8 @@ absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit $EXIT_FAILURE + absdir="$dir" + notinst_path="$notinst_path $dir" fi dir="$absdir" ;; @@ -1328,10 +1535,15 @@ esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; *) dllsearchpath="$dllsearchpath:$dir";; esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac ;; esac continue @@ -1340,15 +1552,15 @@ -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in - *-*-cygwin* | *-*-pw32* | *-*-beos*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) # These systems don't actually have a C or math library (as such) continue ;; - *-*-mingw* | *-*-os2*) + *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; - *-*-openbsd* | *-*-freebsd*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; @@ -1356,10 +1568,19 @@ # Rhapsody C and math libraries are in the System framework deplibs="$deplibs -framework System" continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; esac elif test "X$arg" = "X-lc_r"; then case $host in - *-*-openbsd* | *-*-freebsd*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; @@ -1369,8 +1590,20 @@ continue ;; + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + -model) + compile_command="$compile_command $arg" + compiler_flags="$compiler_flags $arg" + finalize_command="$finalize_command $arg" + prev=xcompiler + continue + ;; + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) - deplibs="$deplibs $arg" + compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" continue ;; @@ -1379,13 +1612,19 @@ continue ;; - # gcc -m* arguments should be passed to the linker via $compiler_flags - # in order to pass architecture information to the linker - # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo - # but this is not reliable with gcc because gcc may use -mfoo to - # select a different linker, different libraries, etc, while - # -Wl,-mfoo simply passes -mfoo to the linker. - -m*) + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m* pass through architecture-specific compiler args for GCC + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -pg pass through profiling flag for GCC + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ + -t[45]*|-txscale*|@*) + # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` @@ -1396,9 +1635,7 @@ esac compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" - if test "$with_gcc" = "yes" ; then - compiler_flags="$compiler_flags $arg" - fi + compiler_flags="$compiler_flags $arg" continue ;; @@ -1636,6 +1873,11 @@ if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" fi else # Only an error if not doing a dry-run. @@ -1741,9 +1983,9 @@ if test ! -d "$output_objdir"; then $show "$mkdir $output_objdir" $run $mkdir $output_objdir - status=$? - if test "$status" -ne 0 && test ! -d "$output_objdir"; then - exit $status + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then + exit $exit_status fi fi @@ -1806,7 +2048,6 @@ newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv link" @@ -1841,7 +2082,10 @@ case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; esac fi if test "$pass" = dlopen; then @@ -1858,7 +2102,7 @@ compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - deplibs="$deplib $deplibs" + compiler_flags="$compiler_flags $deplib" fi continue ;; @@ -1867,10 +2111,6 @@ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 continue fi - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do for search_ext in .la $std_shrext .so .a; do @@ -1981,7 +2221,22 @@ fi case $linkmode in lib) - if test "$deplibs_check_method" != pass_all; then + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + if eval $echo \"$deplib\" 2>/dev/null \ + | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then $echo $echo "*** Warning: Trying to link with static lib archive $deplib." $echo "*** I have the capability to make that library automatically link in when" @@ -2031,7 +2286,7 @@ esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else - $echo "$modename: cannot find the library \`$lib'" 1>&2 + $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 exit $EXIT_FAILURE fi @@ -2055,6 +2310,8 @@ # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no + avoidtemprpath= + # Read the .la file case $lib in @@ -2153,11 +2410,19 @@ dir="$libdir" absdir="$libdir" fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi fi # $installed = yes name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` @@ -2230,12 +2495,12 @@ if test -n "$library_names" && { test "$prefer_static_libs" = no || test -z "$old_library"; }; then # We need to hardcode the library path - if test -n "$shlibpath_var"; then + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath " in *" $dir "*) ;; *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; + *) temp_rpath="$temp_rpath $absdir" ;; esac fi @@ -2272,8 +2537,12 @@ fi link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes ; then + use_static_libs=no + fi if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + { test "$use_static_libs" = no || test -z "$old_library"; }; then if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes @@ -2386,11 +2655,15 @@ if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in - *-*-sco3.2v5* ) add_dir="-L$dir" ;; + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a module then we can not link against # it, someone is ignoring the new warnings I added - if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then + if /usr/bin/file -L $add 2> /dev/null | + $EGREP ": [^:]* bundle" >/dev/null ; then $echo "** Warning, lib $linklib is a module, not a shared library" if test -z "$old_library" ; then $echo @@ -2421,7 +2694,7 @@ add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then - case "$libdir" in + case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; @@ -2494,7 +2767,7 @@ add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then - case "$libdir" in + case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; @@ -2555,8 +2828,6 @@ fi fi else - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" deplibs="$dir/$old_library $deplibs" link_static=yes fi @@ -2674,12 +2945,12 @@ *) continue ;; esac case " $deplibs " in - *" $depdepl "*) ;; - *) deplibs="$depdepl $deplibs" ;; + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; esac case " $deplibs " in - *" $path "*) ;; - *) deplibs="$deplibs $path" ;; + *" $depdepl "*) ;; + *) deplibs="$depdepl $deplibs" ;; esac done fi # link_all_deplibs != no @@ -2933,6 +3204,11 @@ age="$number_minor" revision="$number_minor" ;; + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE + ;; esac ;; no) @@ -2944,27 +3220,27 @@ # Check that each of the things are valid numbers. case $current in - [0-9]*) ;; + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 + $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac case $revision in - [0-9]*) ;; + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 + $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac case $age in - [0-9]*) ;; + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 + $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; @@ -2990,7 +3266,7 @@ versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" ;; freebsd-aout) @@ -3143,9 +3419,9 @@ # Eliminate all temporary directories. for path in $notinst_path; do - lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` - deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` - dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` + lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` + deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` + dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` done if test -n "$xrpath"; then @@ -3196,9 +3472,14 @@ *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; - *-*-openbsd* | *-*-freebsd*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. @@ -3242,11 +3523,11 @@ int main() { return 0; } EOF $rm conftest - $LTCC -o conftest conftest.c $deplibs + $LTCC $LTCFLAGS -o conftest conftest.c $deplibs if test "$?" -eq 0 ; then ldd_output=`ldd conftest` for i in $deplibs; do - name="`expr $i : '-l\(.*\)'`" + name=`expr $i : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" -ne "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then @@ -3283,11 +3564,11 @@ # Error occurred in the first compile. Let's try to salvage # the situation: Compile a separate program for each library. for i in $deplibs; do - name="`expr $i : '-l\(.*\)'`" + name=`expr $i : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" != "0"; then $rm conftest - $LTCC -o conftest conftest.c $i + $LTCC $LTCFLAGS -o conftest conftest.c $i # Did it work? if test "$?" -eq 0 ; then ldd_output=`ldd conftest` @@ -3335,7 +3616,7 @@ set dummy $deplibs_check_method file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" + name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then @@ -3404,7 +3685,7 @@ set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" + name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then @@ -3534,6 +3815,35 @@ deplibs=$newdeplibs fi + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). library_names= old_library= @@ -3617,6 +3927,7 @@ fi lib="$output_objdir/$realname" + linknames= for link do linknames="$linknames $link" @@ -3645,6 +3956,9 @@ # The command line is too long to execute in one step. $show "using reloadable object file for export list..." skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break fi done IFS="$save_ifs" @@ -3678,67 +3992,13 @@ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi generated="$generated $gentop" - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$xdir"; then - exit $status - fi - # We will extract separately just the conflicting names and we will no - # longer touch any unique names. It is faster to leave these extract - # automatically by $AR in one run. - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 - $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 - $AR t "$xabs" | sort | uniq -cd | while read -r count name - do - i=1 - while test "$i" -le "$count" - do - # Put our $i before any first dot (extension) - # Never overwrite any file - name_to="$name" - while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" - do - name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` - done - $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" - $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? - i=`expr $i + 1` - done - done - fi - - libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" fi fi - + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" @@ -3768,7 +4028,8 @@ fi fi - if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` && + if test "X$skipped_export" != "X:" && + len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else @@ -3787,6 +4048,7 @@ save_libobjs=$libobjs fi save_output=$output + output_la=`$echo "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. @@ -3796,13 +4058,13 @@ delfiles= last_robj= k=1 - output=$output_objdir/$save_output-${k}.$objext + output=$output_objdir/$output_la-${k}.$objext # Loop over the list of objects to be linked. for obj in $save_libobjs do eval test_cmds=\"$reload_cmds $objlist $last_robj\" if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*"` && + { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len"; }; then objlist="$objlist $obj" else @@ -3816,9 +4078,9 @@ # the last one created. eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" fi - last_robj=$output_objdir/$save_output-${k}.$objext + last_robj=$output_objdir/$output_la-${k}.$objext k=`expr $k + 1` - output=$output_objdir/$save_output-${k}.$objext + output=$output_objdir/$output_la-${k}.$objext objlist=$obj len=1 fi @@ -3838,13 +4100,13 @@ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" fi - # Set up a command to remove the reloadale object files + # Set up a command to remove the reloadable object files # after they are used. i=0 while test "$i" -lt "$k" do i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" + delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" done $echo "creating a temporary reloadable object file: $output" @@ -3892,13 +4154,30 @@ IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" - $run eval "$cmd" || exit $? + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + fi + fi + exit $EXIT_SUCCESS fi @@ -3976,64 +4255,10 @@ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" else gentop="$output_objdir/${obj}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi generated="$generated $gentop" - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$xdir"; then - exit $status - fi - # We will extract separately just the conflicting names and we will no - # longer touch any unique names. It is faster to leave these extract - # automatically by $AR in one run. - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 - $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 - $AR t "$xabs" | sort | uniq -cd | while read -r count name - do - i=1 - while test "$i" -le "$count" - do - # Put our $i before any first dot (extension) - # Never overwrite any file - name_to="$name" - while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" - do - name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` - done - $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" - $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? - i=`expr $i + 1` - done - done - fi - - reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi @@ -4134,6 +4359,35 @@ ;; esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" @@ -4178,10 +4432,15 @@ fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; *) dllsearchpath="$dllsearchpath:$libdir";; esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac ;; esac done @@ -4295,13 +4554,25 @@ # Prepare the list of exported symbols if test -z "$export_symbols"; then - export_symbols="$output_objdir/$output.exp" + export_symbols="$output_objdir/$outputname.exp" $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* ) + $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac else - $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' - $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' + $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* ) + $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac fi fi @@ -4352,7 +4623,26 @@ #endif /* The mapping between symbol names and symbols. */ +" + + case $host in + *cygwin* | *mingw* ) + $echo >> "$output_objdir/$dlsyms" "\ +/* DATA imports from DLLs on WIN32 can't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs */ +struct { +" + ;; + * ) + $echo >> "$output_objdir/$dlsyms" "\ const struct { +" + ;; + esac + + + $echo >> "$output_objdir/$dlsyms" "\ const char *name; lt_ptr address; } @@ -4399,16 +4689,29 @@ esac # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + case $host in + *cygwin* | *mingw* ) + if test -f "$output_objdir/${outputname}.def" ; then + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + else + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + fi + ;; + * ) + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + esac ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 @@ -4433,7 +4736,7 @@ # We have no uninstalled library dependencies, so finalize right now. $show "$link_command" $run eval "$link_command" - status=$? + exit_status=$? # Delete the generated files. if test -n "$dlsyms"; then @@ -4441,7 +4744,7 @@ $run $rm "$output_objdir/${outputname}S.${objext}" fi - exit $status + exit $exit_status fi if test -n "$shlibpath_var"; then @@ -4581,10 +4884,12 @@ esac case $host in *cygwin* | *mingw* ) - cwrappersource=`$echo ${objdir}/lt-${output}.c` - cwrapper=`$echo ${output}.exe` - $rm $cwrappersource $cwrapper - trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + output_name=`basename $output` + output_path=`dirname $output` + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $rm $cwrappersource $cwrapper + trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 cat > $cwrappersource < #include #include +#include +#include +#include #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX @@ -4619,15 +4927,19 @@ #endif #ifndef DIR_SEPARATOR -#define DIR_SEPARATOR '/' +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) -#define HAVE_DOS_BASED_FILE_SYSTEM -#ifndef DIR_SEPARATOR_2 -#define DIR_SEPARATOR_2 '\\' -#endif +# define HAVE_DOS_BASED_FILE_SYSTEM +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif #endif #ifndef DIR_SEPARATOR_2 @@ -4637,17 +4949,32 @@ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) +/* -DDEBUG is fairly common in CFLAGS. */ +#undef DEBUG +#if defined DEBUGWRAPPER +# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) +#else +# define DEBUG(format, ...) +#endif + const char *program_name = NULL; void * xmalloc (size_t num); char * xstrdup (const char *string); -char * basename (const char *name); -char * fnqualify(const char *path); +const char * base_name (const char *name); +char * find_executable(const char *wrapper); +int check_executable(const char *path); char * strendzap(char *str, const char *pat); void lt_fatal (const char *message, ...); @@ -4657,29 +4984,51 @@ char **newargz; int i; - program_name = (char *) xstrdup ((char *) basename (argv[0])); + program_name = (char *) xstrdup (base_name (argv[0])); + DEBUG("(main) argv[0] : %s\n",argv[0]); + DEBUG("(main) program_name : %s\n",program_name); newargz = XMALLOC(char *, argc+2); EOF - cat >> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" - newargz[1] = fnqualify(argv[0]); + cat >> $cwrappersource <<"EOF" + newargz[1] = find_executable(argv[0]); + if (newargz[1] == NULL) + lt_fatal("Couldn't find %s", argv[0]); + DEBUG("(main) found exe at : %s\n",newargz[1]); /* we know the script has the same name, without the .exe */ /* so make sure newargz[1] doesn't end in .exe */ strendzap(newargz[1],".exe"); for (i = 1; i < argc; i++) newargz[i+1] = xstrdup(argv[i]); newargz[argc+1] = NULL; + + for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" + cat >> $cwrappersource <<"EOF" + return 127; } void * @@ -4699,48 +5048,148 @@ ; } -char * -basename (const char *name) +const char * +base_name (const char *name) { const char *base; #if defined (HAVE_DOS_BASED_FILE_SYSTEM) /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha (name[0]) && name[1] == ':') + if (isalpha ((unsigned char)name[0]) && name[1] == ':') name += 2; #endif for (base = name; *name; name++) if (IS_DIR_SEPARATOR (*name)) base = name + 1; - return (char *) base; + return base; +} + +int +check_executable(const char * path) +{ + struct stat st; + + DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) && + ( + /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ +#if defined (S_IXOTH) + ((st.st_mode & S_IXOTH) == S_IXOTH) || +#endif +#if defined (S_IXGRP) + ((st.st_mode & S_IXGRP) == S_IXGRP) || +#endif + ((st.st_mode & S_IXUSR) == S_IXUSR)) + ) + return 1; + else + return 0; } +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise */ char * -fnqualify(const char *path) +find_executable (const char* wrapper) { - size_t size; - char *p; + int has_slash = 0; + const char* p; + const char* p_next; + /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; + int tmp_len; + char* concat_name; + + DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); - assert(path != NULL); + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; - /* Is it qualified already? */ + /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha (path[0]) && path[1] == ':') - return xstrdup (path); + if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } #endif - if (IS_DIR_SEPARATOR (path[0])) - return xstrdup (path); - /* prepend the current directory */ - /* doesn't handle '~' */ + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char* path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char* q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR(*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen(tmp); + concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); - size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ - p = XMALLOC(char, size); - sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); - return p; + tmp_len = strlen(tmp); + concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + return NULL; } char * @@ -4784,16 +5233,16 @@ va_end (ap); } EOF - # we should really use a build-platform specific compiler - # here, but OTOH, the wrappers (shell script and this C one) - # are only useful if you want to execute the "real" binary. - # Since the "real" binary is built for $host, then this - # wrapper might as well be built for $host, too. - $run $LTCC -s -o $cwrapper $cwrappersource - ;; - esac - $rm $output - trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource + ;; + esac + $rm $output + trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 $echo > $output "\ #! $SHELL @@ -4814,7 +5263,7 @@ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" @@ -4943,13 +5392,13 @@ # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ - exec \$progdir\\\\\$program \${1+\"\$@\"} + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $echo >> $output "\ - exec \$progdir/\$program \${1+\"\$@\"} + exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac @@ -4959,7 +5408,7 @@ fi else # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 + \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 $echo \"See the $PACKAGE documentation for more information.\" 1>&2 exit $EXIT_FAILURE @@ -4991,71 +5440,73 @@ if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi generated="$generated $gentop" - # Add in members from convenience archives. - for xlib in $addlibs; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$xdir"; then - exit $status - fi - # We will extract separately just the conflicting names and we will no - # longer touch any unique names. It is faster to leave these extract - # automatically by $AR in one run. - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 - $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 - $AR t "$xabs" | sort | uniq -cd | while read -r count name - do - i=1 - while test "$i" -le "$count" - do - # Put our $i before any first dot (extension) - # Never overwrite any file - name_to="$name" - while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" - do - name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` - done - $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" - $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? - i=`expr $i + 1` - done - done - fi - - oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` - done + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + $echo "X$obj" | $Xsed -e 's%^.*/%%' + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "copying selected object files to avoid basename conflicts..." + + if test -z "$gentop"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$gentop"; then + exit $exit_status + fi + fi + + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + counter=`expr $counter + 1` + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + $run ln "$obj" "$gentop/$newobj" || + $run cp "$obj" "$gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac + done + fi + eval cmds=\"$old_archive_cmds\" if len=`expr "X$cmds" : ".*"` && @@ -5069,20 +5520,7 @@ objlist= concat_cmds= save_oldobjs=$oldobjs - # GNU ar 2.10+ was changed to match POSIX; thus no paths are - # encoded into archives. This makes 'ar r' malfunction in - # this piecewise linking case whenever conflicting object - # names appear in distinct ar calls; check, warn and compensate. - if (for obj in $save_oldobjs - do - $echo "X$obj" | $Xsed -e 's%^.*/%%' - done | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2 - $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2 - AR_FLAGS=cq - fi + # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do @@ -5093,7 +5531,7 @@ oldobjs="$objlist $obj" objlist="$objlist $obj" eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*"` && + if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len"; then : else @@ -5290,11 +5728,11 @@ # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then + $echo "X$nonopt" | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -5303,14 +5741,14 @@ shift else install_prog= - arg="$nonopt" + arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -5328,28 +5766,31 @@ do if test -n "$dest"; then files="$files $dest" - dest="$arg" + dest=$arg continue fi case $arg in -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; - -*) ;; - + -*) + ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else - dest="$arg" + dest=$arg continue fi ;; @@ -5358,7 +5799,7 @@ # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -5527,11 +5968,14 @@ if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. for linkname do if test "$linkname" != "$realname"; then - $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" fi done fi @@ -5544,7 +5988,16 @@ IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" - $run eval "$cmd" || exit $? + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } done IFS="$save_ifs" fi @@ -5638,17 +6091,15 @@ notinst_deplibs= relink_command= - # To insure that "foo" is sourced, and not "foo.exe", - # finese the cygwin/MSYS system by explicitly sourcing "foo." - # which disallows the automatic-append-.exe behavior. - case $build in - *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; - *) wrapperdot=${wrapper} ;; - esac + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # # If there is no directory component, then add one. - case $file in - */* | *\\*) . ${wrapperdot} ;; - *) . ./${wrapperdot} ;; + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; esac # Check the variables that should have been set. @@ -5676,34 +6127,21 @@ done relink_command= - # To insure that "foo" is sourced, and not "foo.exe", - # finese the cygwin/MSYS system by explicitly sourcing "foo." - # which disallows the automatic-append-.exe behavior. - case $build in - *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; - *) wrapperdot=${wrapper} ;; - esac + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # # If there is no directory component, then add one. - case $file in - */* | *\\*) . ${wrapperdot} ;; - *) . ./${wrapperdot} ;; + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; esac outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then - tmpdir="/tmp" - test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir="$tmpdir/libtool-$$" - save_umask=`umask` - umask 0077 - if $mkdir "$tmpdir"; then - umask $save_umask - else - umask $save_umask - $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 - continue - fi + tmpdir=`func_mktempdir` file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. @@ -5727,7 +6165,7 @@ fi # remove .exe since cygwin /usr/bin/install will append another - # one anyways + # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in @@ -5827,7 +6265,7 @@ # Exit here if they wanted silent mode. test "$show" = : && exit $EXIT_SUCCESS - $echo "----------------------------------------------------------------------" + $echo "X----------------------------------------------------------------------" | $Xsed $echo "Libraries have been installed in:" for libdir in $libdirs; do $echo " $libdir" @@ -5860,7 +6298,7 @@ $echo $echo "See any operating system documentation about shared libraries for" $echo "more information, such as the ld(1) and ld.so(8) manual pages." - $echo "----------------------------------------------------------------------" + $echo "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS ;; @@ -6077,9 +6515,17 @@ rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - if test "$mode" = uninstall; then + case "$mode" in + clean) + case " $library_names " in + # " " in the beginning catches empty $dlname + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. cmds=$postuninstall_cmds @@ -6112,7 +6558,8 @@ IFS="$save_ifs" fi # FIXME: should reinstall the best remaining shared library. - fi + ;; + esac fi ;; @@ -6397,7 +6844,7 @@ $echo $echo "Try \`$modename --help' for more information about other modes." -exit $EXIT_SUCCESS +exit $? # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting @@ -6411,12 +6858,11 @@ # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes +disable_libs=shared # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` +disable_libs=static # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: --- xserver-xorg-driver-ati-6.5.7.3.orig/configure.ac +++ xserver-xorg-driver-ati-6.5.7.3/configure.ac @@ -22,7 +22,7 @@ AC_PREREQ(2.57) AC_INIT([xf86-video-ati], - 6.5.7.3, + 6.5.8.0, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], xf86-video-ati) --- xserver-xorg-driver-ati-6.5.7.3.orig/config.sub +++ xserver-xorg-driver-ati-6.5.7.3/config.sub @@ -1,9 +1,9 @@ #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. -timestamp='2003-06-18' +timestamp='2005-07-08' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -21,14 +21,15 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. + # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # @@ -70,7 +71,7 @@ version="\ GNU config.sub ($timestamp) -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -83,11 +84,11 @@ while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; + echo "$timestamp" ; exit ;; --version | -v ) - echo "$version" ; exit 0 ;; + echo "$version" ; exit ;; --help | --h* | -h ) - echo "$usage"; exit 0 ;; + echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. @@ -99,7 +100,7 @@ *local*) # First pass through any local machine types. echo $1 - exit 0;; + exit ;; * ) break ;; @@ -118,7 +119,8 @@ # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in - nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ + kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; @@ -144,7 +146,7 @@ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis) + -apple | -axis | -knuth | -cray) os= basic_machine=$1 ;; @@ -228,14 +230,16 @@ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ - | ip2k \ - | m32r | m68000 | m68k | m88k | mcore \ + | ip2k | iq2000 \ + | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ @@ -244,31 +248,37 @@ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ + | ms1 \ | msp430 \ | ns16k | ns32k \ - | openrisc | or32 \ + | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ - | s390 | s390x \ - | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ - | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ + | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b \ | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ - | x86 | xscale | xstormy16 | xtensa \ + | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; + m32c) + basic_machine=$basic_machine-unknown + ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown @@ -296,19 +306,19 @@ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* \ - | bs2000-* \ + | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | cydra-* \ + | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* \ - | m32r-* \ + | ip2k-* | iq2000-* \ + | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | mcore-* \ + | m88110-* | m88k-* | maxq-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ @@ -317,34 +327,40 @@ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | ms1-* \ | msp430-* \ - | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ - | s390-* | s390x-* \ - | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ - | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ - | xtensa-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa-* \ | ymp-* \ | z8k-*) ;; + m32c-*) + ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) @@ -361,6 +377,9 @@ basic_machine=a29k-amd os=-udi ;; + abacus) + basic_machine=abacus-unknown + ;; adobe68k) basic_machine=m68010-adobe os=-scout @@ -378,6 +397,9 @@ amd64) basic_machine=x86_64-pc ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; amdahl) basic_machine=580-amdahl os=-sysv @@ -437,12 +459,27 @@ basic_machine=j90-cray os=-unicos ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16c) + basic_machine=cr16c-unknown + os=-elf + ;; crds | unos) basic_machine=m68k-crds ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; da30 | da30-*) basic_machine=m68k-da30 ;; @@ -465,6 +502,10 @@ basic_machine=m88k-motorola os=-sysv3 ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx @@ -643,10 +684,6 @@ mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; - mmix*) - basic_machine=mmix-knuth - os=-mmixware - ;; monitor) basic_machine=m68k-rom68k os=-coff @@ -727,10 +764,6 @@ np1) basic_machine=np1-gould ;; - nv1) - basic_machine=nv1-cray - os=-unicosmp - ;; nsr-tandem) basic_machine=nsr-tandem ;; @@ -738,9 +771,12 @@ basic_machine=hppa1.1-oki os=-proelf ;; - or32 | or32-*) + openrisc | openrisc-*) basic_machine=or32-unknown - os=-coff + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson @@ -833,6 +869,12 @@ rtpc | rtpc-*) basic_machine=romp-ibm ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; sa29200) basic_machine=a29k-amd os=-udi @@ -956,6 +998,10 @@ tower | tower-32) basic_machine=m68k-ncr ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; udi29k) basic_machine=a29k-amd os=-udi @@ -999,6 +1045,10 @@ basic_machine=hppa1.1-winbond os=-proelf ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; xps | xps100) basic_machine=xps100-honeywell ;; @@ -1029,6 +1079,9 @@ romp) basic_machine=romp-ibm ;; + mmix) + basic_machine=mmix-knuth + ;; rs6000) basic_machine=rs6000-ibm ;; @@ -1045,13 +1098,10 @@ we32k) basic_machine=we32k-att ;; - sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) + sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; - sh64) - basic_machine=sh64-unknown - ;; - sparc | sparcv9 | sparcv9b) + sparc | sparcv8 | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) @@ -1124,19 +1174,21 @@ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei*) + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1154,12 +1206,15 @@ os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; @@ -1172,6 +1227,9 @@ -opened*) os=-openedition ;; + -os400*) + os=-os400 + ;; -wince*) os=-wince ;; @@ -1193,6 +1251,9 @@ -atheos*) os=-atheos ;; + -syllable*) + os=-syllable + ;; -386bsd) os=-bsd ;; @@ -1215,6 +1276,9 @@ -sinix*) os=-sysv4 ;; + -tpf*) + os=-tpf + ;; -triton*) os=-sysv3 ;; @@ -1251,6 +1315,9 @@ -kaos*) os=-kaos ;; + -zvmoe) + os=-zvmoe + ;; -none) ;; *) @@ -1282,9 +1349,9 @@ arm*-semi) os=-aout ;; - c4x-* | tic4x-*) - os=-coff - ;; + c4x-* | tic4x-*) + os=-coff + ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 @@ -1328,9 +1395,15 @@ *-be) os=-beos ;; + *-haiku) + os=-haiku + ;; *-ibm) os=-aix ;; + *-knuth) + os=-mmixware + ;; *-wec) os=-proelf ;; @@ -1463,9 +1536,15 @@ -mvs* | -opened*) vendor=ibm ;; + -os400*) + vendor=ibm + ;; -ptx*) vendor=sequent ;; + -tpf*) + vendor=ibm + ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; @@ -1490,7 +1569,7 @@ esac echo $basic_machine$os -exit 0 +exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) --- xserver-xorg-driver-ati-6.5.7.3.orig/config.guess +++ xserver-xorg-driver-ati-6.5.7.3/config.guess @@ -1,9 +1,9 @@ #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. -timestamp='2003-06-17' +timestamp='2005-08-03' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -17,13 +17,15 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. + # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. @@ -53,7 +55,7 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -66,11 +68,11 @@ while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; + echo "$timestamp" ; exit ;; --version | -v ) - echo "$version" ; exit 0 ;; + echo "$version" ; exit ;; --help | --h* | -h ) - echo "$usage"; exit 0 ;; + echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. @@ -123,7 +125,7 @@ ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ;' +esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) @@ -136,13 +138,6 @@ UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown -## for Red Hat Linux -if test -f /etc/redhat-release ; then - VENDOR=redhat ; -else - VENDOR= ; -fi - # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in @@ -203,50 +198,29 @@ # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" - exit 0 ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - macppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvmeppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mipseb-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sun3:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; + exit ;; *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerppc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; alpha:OSF1:*:*) - if test $UNAME_RELEASE = "V4.0"; then + case $UNAME_RELEASE in + *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - fi + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU @@ -284,42 +258,49 @@ "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac + # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit 0 ;; - Alpha*:OpenVMS:*:*) - echo alpha-hp-vms - exit 0 ;; + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix - exit 0 ;; + exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 - exit 0 ;; + exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 - exit 0;; + exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos - exit 0 ;; + exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos - exit 0 ;; + exit ;; *:OS/390:*:*) echo i370-ibm-openedition - exit 0 ;; + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp - exit 0;; + exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then @@ -327,32 +308,32 @@ else echo pyramid-pyramid-bsd fi - exit 0 ;; + exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 - exit 0 ;; + exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 - exit 0 ;; - DRS?6000:UNIX_SV:4.2*:7*) + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7 && exit 0 ;; + sparc) echo sparc-icl-nx7; exit ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) @@ -361,10 +342,10 @@ esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; + exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; + exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 @@ -376,10 +357,10 @@ echo sparc-sun-sunos${UNAME_RELEASE} ;; esac - exit 0 ;; + exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; + exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor @@ -390,37 +371,40 @@ # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; + exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 - exit 0 ;; + exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; + exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; + exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; + exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -444,32 +428,33 @@ exit (-1); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c \ - && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && exit 0 + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; + exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax - exit 0 ;; + exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax - exit 0 ;; + exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax - exit 0 ;; + exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix - exit 0 ;; + exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 - exit 0 ;; + exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 - exit 0 ;; + exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 - exit 0 ;; + exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` @@ -485,29 +470,29 @@ else echo i586-dg-dgux${UNAME_RELEASE} fi - exit 0 ;; + exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 - exit 0 ;; + exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 - exit 0 ;; + exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 - exit 0 ;; + exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd - exit 0 ;; + exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; + exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix - exit 0 ;; + exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` @@ -515,7 +500,7 @@ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit 0 ;; + exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build @@ -530,14 +515,18 @@ exit(0); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 - echo rs6000-ibm-aix3.2.5 + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi - exit 0 ;; + exit ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then @@ -551,28 +540,28 @@ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; + exit ;; *:AIX:*:*) echo rs6000-ibm-aix - exit 0 ;; + exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 - exit 0 ;; + exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 + exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx - exit 0 ;; + exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 - exit 0 ;; + exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd - exit 0 ;; + exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 - exit 0 ;; + exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in @@ -634,9 +623,19 @@ esac if [ ${HP_ARCH} = "hppa2.0w" ] then - # avoid double evaluation of $set_cc_for_build - test -n "$CC_FOR_BUILD" || eval $set_cc_for_build - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else @@ -644,11 +643,11 @@ fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; + exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} - exit 0 ;; + exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -676,150 +675,166 @@ exit (0); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 - exit 0 ;; + exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd - exit 0 ;; + exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd - exit 0 ;; + exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix - exit 0 ;; + exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf - exit 0 ;; + exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf - exit 0 ;; + exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi - exit 0 ;; + exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites - exit 0 ;; + exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd - exit 0 ;; + exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit 0 ;; + exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd - exit 0 ;; + exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd - exit 0 ;; + exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd - exit 0 ;; + exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; *:UNICOS/mp:*:*) - echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; + exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; + exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) - # Determine whether the default compiler uses glibc. - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #if __GLIBC__ >= 2 - LIBC=gnu - #else - LIBC= - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} - exit 0 ;; + exit ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin - exit 0 ;; + exit ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 - exit 0 ;; + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 - exit 0 ;; + exit ;; x86:Interix*:[34]*) echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' - exit 0 ;; + exit ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks - exit 0 ;; + exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix - exit 0 ;; + exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin - exit 0 ;; + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin - exit 0 ;; + exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; *:GNU:*:*) + # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix - exit 0 ;; + exit ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu - exit 0 ;; + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; ia64:Linux:*:*) - echo ${UNAME_MACHINE}-${VENDOR:-unknown}-linux-gnu - exit 0 ;; + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -837,7 +852,7 @@ #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; mips64:Linux:*:*) eval $set_cc_for_build @@ -856,14 +871,17 @@ #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; ppc:Linux:*:*) - echo powerpc-${VENDOR:-unknown}-linux-gnu - exit 0 ;; + echo powerpc-unknown-linux-gnu + exit ;; ppc64:Linux:*:*) - echo powerpc64-${VENDOR:-unknown}-linux-gnu - exit 0 ;; + echo powerpc64-unknown-linux-gnu + exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; @@ -877,7 +895,7 @@ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit 0 ;; + exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in @@ -885,25 +903,25 @@ PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac - exit 0 ;; + exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu - exit 0 ;; + exit ;; s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-${VENDOR:-ibm}-linux-gnu - exit 0 ;; + echo ${UNAME_MACHINE}-ibm-linux + exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; x86_64:Linux:*:*) - echo x86_64-${VENDOR:-unknown}-linux-gnu - exit 0 ;; + echo x86_64-unknown-linux-gnu + exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent @@ -921,15 +939,15 @@ ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 ;; + exit ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 ;; + exit ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit 0 ;; + exit ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build @@ -952,17 +970,23 @@ LIBC=gnuaout #endif #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - test x"${LIBC}" != x && echo "${UNAME_MACHINE}-${VENDOR:-pc}-linux-${LIBC}" && exit 0 - test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 - exit 0 ;; + exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... @@ -970,24 +994,27 @@ # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; + exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx - exit 0 ;; + exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop - exit 0 ;; + exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos - exit 0 ;; + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; + exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then @@ -995,15 +1022,16 @@ else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi - exit 0 ;; - i*86:*:5:[78]*) + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit 0 ;; + exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi - exit 0 ;; + exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv - exit 0 ;; + exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv - exit 0 ;; + exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix - exit 0 ;; - M68*:*:R3V[567]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; + && { echo i486-ncr-sysv4; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 - exit 0 ;; + exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; + exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 - exit 0 ;; + exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 - exit 0 ;; + exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` @@ -1095,68 +1123,73 @@ else echo ns32k-sni-sysv fi - exit 0 ;; + exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 - exit 0 ;; + exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 - exit 0 ;; + exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 - exit 0 ;; + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos - exit 0 ;; + exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; + exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 - exit 0 ;; + exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi - exit 0 ;; + exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos - exit 0 ;; + exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos - exit 0 ;; + exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos - exit 0 ;; + exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Darwin:*:*) - case `uname -p` in + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in *86) UNAME_PROCESSOR=i686 ;; - powerpc) UNAME_PROCESSOR=powerpc ;; + unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit 0 ;; + exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then @@ -1164,22 +1197,25 @@ UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit 0 ;; + exit ;; *:QNX:*:4*) echo i386-pc-qnx - exit 0 ;; - NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} - exit 0 ;; + exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux - exit 0 ;; + exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv - exit 0 ;; + exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 @@ -1190,28 +1226,44 @@ UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 - exit 0 ;; + exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 - exit 0 ;; + exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex - exit 0 ;; + exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 - exit 0 ;; + exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 - exit 0 ;; + exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 - exit 0 ;; + exit ;; *:ITS:*:*) echo pdp10-unknown-its - exit 0 ;; + exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} - exit 0 ;; + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 @@ -1243,7 +1295,7 @@ #endif #if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); + printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) @@ -1332,11 +1384,12 @@ } EOF -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) @@ -1345,22 +1398,22 @@ case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd - exit 0 ;; + exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit 0 ;; + exit ;; c34*) echo c34-convex-bsd - exit 0 ;; + exit ;; c38*) echo c38-convex-bsd - exit 0 ;; + exit ;; c4*) echo c4-convex-bsd - exit 0 ;; + exit ;; esac fi @@ -1371,7 +1424,9 @@ the operating system you are using. It is advised that you download the most up to date version of the config scripts from - ftp://ftp.gnu.org/pub/gnu/config/ + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess +and + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub If the version you run ($0) is already up to date, please send the following data and any information you think might be --- xserver-xorg-driver-ati-6.5.7.3.orig/compile +++ xserver-xorg-driver-ati-6.5.7.3/compile @@ -28,6 +28,14 @@ # compile PROGRAM [ARGS]... # `-o FOO.o' is removed from the args passed to the actual compile. +# Usage statement added by Billy Biggs . +if [ -z $1 ]; then + echo "Wrapper for compilers which do not understand '-c -o'." + echo "usage: compile PROGRAM [ARGS]..." + echo "'-o FOO.o' is removed from the args passed to the actual compile." + exit 1 +fi + prog=$1 shift --- xserver-xorg-driver-ati-6.5.7.3.orig/aclocal.m4 +++ xserver-xorg-driver-ati-6.5.7.3/aclocal.m4 @@ -900,7 +900,7 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# serial 47 AC_PROG_LIBTOOL +# serial 48 Debian 1.5.22-2 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) @@ -1010,7 +1010,7 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' +Xsed='sed -e 1s/^X//' [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] # Same as above, but do not quote variable references. @@ -1030,7 +1030,7 @@ default_ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except M$VC, +# All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" @@ -1050,6 +1050,7 @@ test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" @@ -1069,15 +1070,17 @@ if test -n "$RANLIB"; then case $host_os in openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi +_LT_CC_BASENAME([$compiler]) + # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) @@ -1118,11 +1121,56 @@ # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_AC_SYS_COMPILER +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +AC_DEFUN([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +]) + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +AC_DEFUN([_LT_COMPILER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +AC_DEFUN([_LT_LINKER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_LINKER_BOILERPLATE + + # _LT_AC_SYS_LIBPATH_AIX # ---------------------- # Links a minimal program and checks the executable @@ -1195,15 +1243,15 @@ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break @@ -1372,7 +1420,7 @@ # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*linux*) @@ -1423,6 +1471,22 @@ CFLAGS="$SAVE_CFLAGS" fi ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) LD="${LD-ld} -64" ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) @@ -1454,7 +1518,7 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) @@ -1464,8 +1528,10 @@ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi @@ -1491,11 +1557,16 @@ LDFLAGS="$LDFLAGS $3" printf "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized + # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi else $2=yes fi @@ -1554,11 +1625,55 @@ lt_cv_sys_max_cmd_len=8192; ;; - *) + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ = "XX$teststring") >/dev/null 2>&1 && new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && @@ -1584,7 +1699,7 @@ # _LT_AC_CHECK_DLFCN -# -------------------- +# ------------------ AC_DEFUN([_LT_AC_CHECK_DLFCN], [AC_CHECK_HEADERS(dlfcn.h)dnl ])# _LT_AC_CHECK_DLFCN @@ -1592,7 +1707,7 @@ # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ +# --------------------------------------------------------------------- AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "$cross_compiling" = yes; then : @@ -1658,17 +1773,19 @@ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } + else + puts (dlerror ()); exit (status); }] EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; + x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed @@ -1680,7 +1797,7 @@ # AC_LIBTOOL_DLOPEN_SELF -# ------------------- +# ---------------------- AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "x$enable_dlopen" != xyes; then @@ -1751,7 +1868,7 @@ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" @@ -1764,7 +1881,7 @@ ]) if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_AC_TRY_DLOPEN_SELF( @@ -1812,7 +1929,7 @@ # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) @@ -1824,11 +1941,13 @@ then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi - chmod u+w . + chmod u+w . 2>&AS_MESSAGE_LOG_FD $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation @@ -1892,8 +2011,8 @@ [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_AC_TAGVAR(hardcode_action, $1)= if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ - test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then + test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existant directories. if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && @@ -2060,7 +2179,7 @@ shlibpath_var=LIBRARY_PATH ;; -bsdi4*) +bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -2088,7 +2207,8 @@ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -2118,7 +2238,7 @@ ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac ;; @@ -2141,7 +2261,7 @@ soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -2176,8 +2296,17 @@ dynamic_linker='GNU ld.so' ;; -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -2195,14 +2324,19 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - freebsd3.[01]* | freebsdelf3.[01]*) + freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; - *) # from 3.2 on + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; esac ;; @@ -2222,7 +2356,7 @@ version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes @@ -2262,6 +2396,18 @@ postinstall_cmds='chmod 555 $lib' ;; +interix3*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; @@ -2319,27 +2465,10 @@ # before this can be enabled. hardcode_into_libs=yes - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - esac - fi - rm -rf conftest* - ;; - esac - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -2351,6 +2480,18 @@ dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + knetbsd*-gnu) version_type=linux need_lib_prefix=no @@ -2400,8 +2541,13 @@ openbsd*) version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no - need_version=yes + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH @@ -2439,13 +2585,6 @@ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; - solaris*) version_type=linux need_lib_prefix=no @@ -2471,7 +2610,7 @@ need_version=yes ;; -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' @@ -2504,6 +2643,29 @@ fi ;; +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -2517,6 +2679,11 @@ esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER @@ -2541,6 +2708,9 @@ AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) fi fi + if test -z "$LTCFLAGS"; then + eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" + fi # Extract list of available tagged configurations in $ofile. # Note that this assumes the entire list is on one line. @@ -2567,7 +2737,9 @@ case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2629,7 +2801,7 @@ # AC_LIBTOOL_WIN32_DLL # -------------------- -# declare package support for building win32 dll's +# declare package support for building win32 DLLs AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_WIN32_DLL @@ -2667,7 +2839,7 @@ # AC_DISABLE_SHARED # ----------------- -#- set the default shared flag to --disable-shared +# set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no) @@ -2803,7 +2975,7 @@ if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then @@ -2913,7 +3085,7 @@ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. + # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; @@ -3050,7 +3231,7 @@ hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file - case "$host_cpu" in + case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so @@ -3066,6 +3247,11 @@ esac ;; +interix3*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; @@ -3078,19 +3264,10 @@ # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; -netbsd*) +netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else @@ -3109,12 +3286,10 @@ ;; openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; @@ -3122,15 +3297,11 @@ lt_cv_deplibs_check_method=pass_all ;; -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - solaris*) lt_cv_deplibs_check_method=pass_all ;; -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' @@ -3151,10 +3322,13 @@ siemens) lt_cv_deplibs_check_method=pass_all ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; esac ;; -sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; esac @@ -3174,36 +3348,43 @@ # Let the user override the test. lt_cv_path_NM="$NM" else - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/${ac_tool_prefix}nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" break ;; *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac ;; esac - esac - fi + fi + done + IFS="$lt_save_ifs" done - IFS="$lt_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" @@ -3235,13 +3416,13 @@ # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl convenience library and # LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. +# --enable-ltdl-convenience to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# it is assumed to be `libltdl'. LIBLTDL will be prefixed with +# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' +# (note the single quotes!). If your package is not flat and you're not +# using automake, define top_builddir and top_srcdir appropriately in +# the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in @@ -3260,13 +3441,13 @@ # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl installable library and # LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided and an installed libltdl is not found, it is -# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' -# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single -# quotes!). If your package is not flat and you're not using automake, -# define top_builddir and top_srcdir appropriately in the Makefiles. +# --enable-ltdl-install to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# and an installed libltdl is not found, it is assumed to be `libltdl'. +# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and top_srcdir +# appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl @@ -3304,10 +3485,21 @@ # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# ------------------ +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -3347,7 +3539,7 @@ # AC_LIBTOOL_RC -# -------------- +# ------------- # enable support for Windows resource files AC_DEFUN([AC_LIBTOOL_RC], [AC_REQUIRE([LT_AC_PROG_RC]) @@ -3380,36 +3572,9 @@ _LT_AC_SYS_COMPILER -# -# Check for any special shared library compilation flags. -# -_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= -if test "$GCC" = no; then - case $host_os in - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' - ;; - esac -fi -if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then - AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) - _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no - fi -fi - - -# -# Check to make sure the static flag actually works. -# -AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), - $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), - [], - [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) - +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) @@ -3419,9 +3584,9 @@ AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF($1) +AC_LIBTOOL_DLOPEN_SELF -# Report which librarie types wil actually be built +# Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) @@ -3430,7 +3595,7 @@ # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -3443,43 +3608,6 @@ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi - ;; - darwin* | rhapsody*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' - ;; - esac - fi - ;; - esac - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi ;; esac AC_MSG_RESULT([$enable_shared]) @@ -3505,7 +3633,7 @@ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3517,6 +3645,7 @@ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= @@ -3534,7 +3663,7 @@ _LT_AC_TAGVAR(compiler_lib_search_path, $1)= # Source file extension for C++ test sources. -ac_ext=cc +ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o @@ -3544,11 +3673,15 @@ lt_simple_compile_test_code="int some_variable = 0;\n" # Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' +lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD @@ -3559,18 +3692,18 @@ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else - unset lt_cv_prog_gnu_ld + $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else - unset lt_cv_path_LD + $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +_LT_CC_BASENAME([$compiler]) # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately @@ -3659,6 +3792,7 @@ ;; esac done + ;; esac exp_sym_flag='-bexport' @@ -3677,7 +3811,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) + case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -3696,8 +3830,12 @@ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi + ;; esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -3724,12 +3862,12 @@ _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX @@ -3738,16 +3876,26 @@ # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + chorus*) case $cc_basename in *) @@ -3766,7 +3914,7 @@ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -3775,70 +3923,81 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - darwin* | rhapsody*) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' - ;; - esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac fi - ;; - esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; + ;; dgux*) case $cc_basename in - ec++) + ec++*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - ghcx) + ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -3849,14 +4008,14 @@ ;; esac ;; - freebsd[12]*) + freebsd[[12]]*) # C++ shared libraries reported to be fairly broken before switch to ELF _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; - freebsd* | kfreebsd*-gnu) + freebsd* | kfreebsd*-gnu | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_AC_TAGVAR(ld_shlibs, $1)=yes @@ -3873,11 +4032,11 @@ # location of the library. case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - aCC) + aCC*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -3887,7 +4046,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then @@ -3901,33 +4060,22 @@ ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then - case "$host_cpu" in - hppa*64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ;; *) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi - case "$host_cpu" in - hppa*64*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - ia64*) + case $host_cpu in + hppa*64*|ia64*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. ;; *) _LT_AC_TAGVAR(hardcode_direct, $1)=yes @@ -3938,14 +4086,17 @@ esac case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - aCC) - case "$host_cpu" in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + aCC*) + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' @@ -3964,9 +4115,12 @@ *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then - case "$host_cpu" in - ia64*|hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' @@ -3980,11 +4134,25 @@ ;; esac ;; + interix3*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; irix5* | irix6*) case $cc_basename in - CC) + CC*) # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -3995,7 +4163,7 @@ *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi @@ -4008,7 +4176,7 @@ ;; linux*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file @@ -4033,17 +4201,41 @@ # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - icpc) + icpc*) # Intel C++ with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; - cxx) + pgCC*) + # Portland Group C++ compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) # Compaq C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' @@ -4074,7 +4266,7 @@ ;; mvs*) case $cc_basename in - cxx) + cxx*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; @@ -4084,7 +4276,7 @@ ;; esac ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= @@ -4095,9 +4287,25 @@ # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; + openbsd2*) + # C++ shared libraries are fairly broken + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; osf3*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file @@ -4113,14 +4321,14 @@ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - RCC) + RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - cxx) + cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -4138,7 +4346,7 @@ *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -4157,7 +4365,7 @@ ;; osf4* | osf5*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file @@ -4172,17 +4380,17 @@ # the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - RCC) + RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - cxx) + cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ $rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -4201,7 +4409,7 @@ *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: @@ -4222,27 +4430,14 @@ # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - sco*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; sunos4*) case $cc_basename in - CC) + CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - lcc) + lcc*) # Lucid # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -4255,36 +4450,33 @@ ;; solaris*) case $cc_basename in - CC) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The C++ compiler is used as linker so we must use $wl # flag to pass the commands to the underlying system - # linker. + # linker. We must also pass each convience library through + # to the system linker between allextract/defaultextract. + # The C++ compiler will combine linker options so we + # cannot just pass the convience library names through + # without $wl. # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -4292,7 +4484,7 @@ # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; - gcx) + gcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' @@ -4330,12 +4522,63 @@ ;; esac ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + # So that behaviour is only enabled if SCOABSPATH is set to a + # non-empty value in the environment. Most likely only useful for + # creating official distributions of packages. + # This is a hack until libtool officially supports absolute path + # names for shared libraries. + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac ;; tandem*) case $cc_basename in - NCC) + NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no @@ -4368,8 +4611,6 @@ AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF($1) AC_LIBTOOL_CONFIG($1) @@ -4387,7 +4628,7 @@ ])# AC_LIBTOOL_LANG_CXX_CONFIG # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) -# ------------------------ +# ------------------------------------ # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary @@ -4441,7 +4682,7 @@ # The `*' in the case matches for architectures that use `case' in # $output_verbose_cmd can trigger glob expansion during the loop # eval without this substitution. - output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" + output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` for p in `eval $output_verbose_link_cmd`; do case $p in @@ -4517,13 +4758,37 @@ $rm -f confest.$objext +# PORTME: override above test on systems where it is broken +ifelse([$1],[CXX], +[case $host_os in +interix3*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_AC_TAGVAR(predep_objects,$1)= + _LT_AC_TAGVAR(postdep_objects,$1)= + _LT_AC_TAGVAR(postdeps,$1)= + ;; + +solaris*) + case $cc_basename in + CC*) + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun' + ;; + esac + ;; +esac +]) + case " $_LT_AC_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac ])# AC_LIBTOOL_POSTDEP_PREDEP # AC_LIBTOOL_LANG_F77_CONFIG -# ------------------------ +# -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. @@ -4567,12 +4832,16 @@ # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${F77-"f77"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +_LT_CC_BASENAME([$compiler]) AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) @@ -4582,7 +4851,7 @@ # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -4591,7 +4860,9 @@ fi ;; aix4* | aix5*) - test "$enable_shared" = yes && enable_static=no + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi ;; esac AC_MSG_RESULT([$enable_shared]) @@ -4601,8 +4872,6 @@ test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - _LT_AC_TAGVAR(GCC, $1)="$G77" _LT_AC_TAGVAR(LD, $1)="$LD" @@ -4612,8 +4881,6 @@ AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP - AC_LIBTOOL_CONFIG($1) @@ -4642,20 +4909,27 @@ lt_simple_compile_test_code="class foo {}\n" # Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${GCJ-"gcj"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds + AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) @@ -4663,8 +4937,6 @@ AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF($1) AC_LIBTOOL_CONFIG($1) @@ -4674,7 +4946,7 @@ # AC_LIBTOOL_LANG_RC_CONFIG -# -------------------------- +# ------------------------- # Ensure that the configuration vars for the Windows resource compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. @@ -4698,11 +4970,16 @@ # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${RC-"windres"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes AC_LIBTOOL_CONFIG($1) @@ -4732,7 +5009,7 @@ # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ @@ -4838,7 +5115,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -4849,11 +5126,11 @@ SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e s/^X//" +Xsed="$SED -e 1s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= @@ -4884,6 +5161,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -4895,6 +5178,9 @@ # A C compiler. LTCC=$lt_LTCC +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + # A language-specific compiler. CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) @@ -4960,7 +5246,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -5234,9 +5520,6 @@ # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" @@ -5258,15 +5541,31 @@ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; -solaris* | sysv5*) +solaris*) symcode='[[BDRT]]' ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; sysv4) symcode='[[DFNSTU]]' ;; @@ -5289,8 +5588,11 @@ # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no @@ -5446,6 +5748,10 @@ # DJGPP does not support shared libraries at all _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ;; + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic @@ -5454,7 +5760,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) ;; *) @@ -5479,18 +5785,28 @@ ;; chorus*) case $cc_basename in - cxch68) + cxch68*) # Green Hills C++ Compiler # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; dgux*) case $cc_basename in - ec++) + ec++*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; - ghcx) + ghcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; @@ -5498,22 +5814,22 @@ ;; esac ;; - freebsd* | kfreebsd*-gnu) + freebsd* | kfreebsd*-gnu | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in - CC) + CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; - aCC) + aCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - case "$host_cpu" in + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -5526,9 +5842,13 @@ ;; esac ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; irix5* | irix6* | nonstopux*) case $cc_basename in - CC) + CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. @@ -5539,18 +5859,24 @@ ;; linux*) case $cc_basename in - KCC) + KCC*) # KAI C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; - icpc) + icpc* | ecpc*) # Intel C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; - cxx) + pgCC*) + # Portland Group C++ compiler. + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. @@ -5567,25 +5893,25 @@ ;; mvs*) case $cc_basename in - cxx) + cxx*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) ;; osf3* | osf4* | osf5*) case $cc_basename in - KCC) + KCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; - RCC) + RCC*) # Rational C++ 2.4.1 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; - cxx) + cxx*) # Digital/Compaq C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha @@ -5599,24 +5925,15 @@ ;; psos*) ;; - sco*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - *) - ;; - esac - ;; solaris*) case $cc_basename in - CC) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; - gcx) + gcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; @@ -5626,12 +5943,12 @@ ;; sunos4*) case $cc_basename in - CC) + CC*) # Sun C++ 4.x _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; - lcc) + lcc*) # Lucid _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; @@ -5641,7 +5958,7 @@ ;; tandem*) case $cc_basename in - NCC) + NCC*) # NonStop-UX NCC 3.20 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; @@ -5649,7 +5966,14 @@ ;; esac ;; - unixware*) + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac ;; vxworks*) ;; @@ -5696,6 +6020,11 @@ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. @@ -5712,7 +6041,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -5738,6 +6067,16 @@ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being @@ -5749,7 +6088,7 @@ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -5773,12 +6112,19 @@ ;; linux*) - case $CC in + case $cc_basename in icc* | ecc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; ccc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. @@ -5793,15 +6139,15 @@ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' - ;; - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac ;; sunos4*) @@ -5810,7 +6156,7 @@ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + sysv4 | sysv4.2uw2* | sysv4.3*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' @@ -5823,6 +6169,17 @@ fi ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + uts4*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' @@ -5850,7 +6207,7 @@ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= @@ -5859,6 +6216,16 @@ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" ;; esac + +# +# Check to make sure the static flag actually works. +# +wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ]) @@ -5883,7 +6250,13 @@ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + kfreebsd*-gnu) + _LT_AC_TAGVAR(link_all_deplibs, $1)=no + ;; + linux*) + _LT_AC_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' @@ -5926,7 +6299,8 @@ # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= - + # Just being paranoid about ensuring that cc_basename is set. + _LT_CC_BASENAME([$compiler]) case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time @@ -5936,6 +6310,10 @@ with_gnu_ld=no fi ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; openbsd*) with_gnu_ld=no ;; @@ -5946,6 +6324,27 @@ # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) @@ -5996,10 +6395,10 @@ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -6008,13 +6407,60 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + interix3*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=no else - ld_shlibs=no + _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= @@ -6024,7 +6470,7 @@ fi ;; - solaris* | sysv5*) + solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 @@ -6045,6 +6491,33 @@ fi ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + sunos4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= @@ -6052,31 +6525,6 @@ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds" - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - if test $supports_anon_versioning = yes; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ -cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ -$echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds" - fi - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' @@ -6087,16 +6535,11 @@ ;; esac - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) @@ -6108,7 +6551,7 @@ # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported @@ -6142,6 +6585,7 @@ break fi done + ;; esac exp_sym_flag='-bexport' @@ -6160,7 +6604,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) + case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -6179,8 +6623,12 @@ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi + ;; esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -6188,11 +6636,11 @@ # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then + if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' - fi + fi fi fi @@ -6206,12 +6654,12 @@ # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX @@ -6220,13 +6668,11 @@ # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -6239,7 +6685,7 @@ _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - bsdi4*) + bsdi[[45]]*) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; @@ -6260,57 +6706,57 @@ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) - if test "$GXX" = yes ; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' - ;; - esac - fi - ;; + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac fi ;; @@ -6344,11 +6790,20 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu) + freebsd* | dragonfly*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # GNU/kFreeBSD uses gcc -shared to do shared libraries. + kfreebsd*-gnu) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(link_all_deplibs, $1)=no ;; hpux9*) @@ -6367,47 +6822,62 @@ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; - hpux10* | hpux11*) + hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else - case "$host_cpu" in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ;; *) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' @@ -6431,7 +6901,7 @@ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -6455,6 +6925,7 @@ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else @@ -6500,7 +6971,7 @@ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -6508,21 +6979,15 @@ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; - sco3.2v5*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - solaris*) _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' if test "$GCC" = yes; then + wlarc='${wl}' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else + wlarc='' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' @@ -6531,8 +6996,18 @@ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + *) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; @@ -6589,36 +7064,45 @@ fi ;; - sysv4.2uw2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; + runpath_var='LD_RUN_PATH' - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - sysv5*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi ;; uts4*) @@ -6636,11 +7120,6 @@ AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - # # Do we need to explicitly link libc? # @@ -6668,6 +7147,7 @@ libobjs=conftest.$ac_objext deplibs= wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= @@ -6793,7 +7273,7 @@ # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && break + test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in @@ -6818,8 +7298,8 @@ fi done done -SED=$lt_cv_path_SED ]) +SED=$lt_cv_path_SED AC_MSG_RESULT([$SED]) ]) @@ -7029,7 +7509,7 @@ fi[]dnl ])# PKG_CHECK_MODULES -dnl $Id: xorg-macros.m4,v 1.8 2005/12/09 15:28:41 kem Exp $ +dnl $Id: xorg-macros.m4,v 1.7 2005/12/09 03:01:09 kem Exp $ dnl dnl Copyright 2005 Sun Microsystems, Inc. All rights reserved. dnl --- xserver-xorg-driver-ati-6.5.7.3.orig/ChangeLog +++ xserver-xorg-driver-ati-6.5.7.3/ChangeLog @@ -1,3 +1,361 @@ +2006-04-24 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONInitCrtcRegisters), + (RADEONInitCrtc2Registers): + Fix enabling of external VGA output on some cards with dual entity + setup instead of MergedFB. This was broken due to bogus manipulations + of a register between the 2 entities. This fix is a big "violent" in + that it always enables the analog output regardless of what is + plugged. It should work though (at the expense of some additional + power consumption). A proper fix should be easy to do once Alex gets + his output mapping rework in. + +2006-04-21 Dave Airlie + + * src/radeon_driver.c: (RADEONRestoreMode): + Bugzilla 6672: fix interrupts on radeon since memmap changes + +2006-04-21 Dave Airlie + + * src/radeon.h: + * src/radeon_dri.c: (RADEONDRICloseScreen), + (RADEONDRIAllocatePCIGARTTable): + * src/radeon_driver.c: (RADEONEnterVT), (RADEONLeaveVT): + Add support for backing up the PCIE GART table on VT switch. + This makes suspend/resume work a lot better on PCIE cards. + + +2006-04-04 Eric Anholt + + * man/ati.man: + * man/radeon.man: + Bug #5632: Fix up ati.4 to explain that it is a wrapper driver for the + other three. While here, touch up radeon.4, and add an authors list + gleaned from checking copyright headers. + +2006-04-01 Alex Deucher + + * src/radeon.h: + * src/radeon_driver.c: (RADEONPreInitModes), (RADEONPreInit), + (RADEONResetDPI), (RADEONSwitchMode): + * src/radeon_mergedfb.c: (RADEONMergedFBCalcDPI), + (RADEONMergedFBSetDpi), (RADEONMergedFBResetDpi): + * src/radeon_mergedfb.h: + - Fix dpi when switching from clone to dualhead with MergedFB. + - Add ConstantDPI option to force a particlar dpi across mode changes + Both based on Thomas Winischhofer's sis code. + +2006-03-27 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONRestoreMemMapRegisters), + (RADEONInit): + Fix a regression of my latest fix that broke color tiling on some + setups. RADEONRestoreMemMapRegisters() must not clear CRTC_OFFSET_CNTL + and friends unconditionally but only when there is a map change or it + will clear them after the DRI updates the AGP location, thus turning + tiling back off on the CRTC. + Also remove a duplicate call to RADEONInitCommonRegisters(). + +2006-03-23 Roland Scheidegger + * src/radeon_reg.h: + * src/radeon_video.c: (RADEONResetVideo), (RADEONDisplayVideo), + (RADEONPutImage): Use programmable tap coefficients for (hopefully) + better video image quality when downscaling. Remove unnecessary code + programming the tap coefficients twice. Disable some code which is + supposed to improve filtering quality but causes very visible image + quality problems at least with rv250 when upscaling. Fix potentially + broken FOURCC_RGB16T format (untested if it was broken, untested if it + works now...). Change some magic numbers to (new) macro defines. + +2006-03-23 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONRestoreMode), + (RADEONInitCrtcRegisters), (RADEONInitCrtc2Registers): + Call RADEONRestoreCommonRegisters() before + RADEONRestoreCrtc2Registers() instead of after. I can't find any good + reason why we did it backward until now and it definitely causes + problems as the workaround for VT switch in + RADEONRestoreCommonRegisters() will break output to the secondary head + in various situations. Also does an unrelated minor update to a + comment. + +2006-03-18 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONRestoreMemMapRegisters), + (RADEONRestoreCrtcRegisters), (RADEONRestoreCrtc2Registers): + * src/radeon_reg.h: + Clear the offsets when updating the memory map instead of when + enabling the CRTCs and try to make that code more reliable. Doesn't + disable the CRTCs beforehand. + +2006-03-18 Roland Scheidegger + * src/radeon_dri.c: (RADEONDRIGetVersion) + * src/radeon_driver.c: (RADEONGetAccessibleVRAM): + * man/radeon_reg.h: + * src/radeon_video.c: + Fix various small cosmetic issues. Change a driver message, get the order + right for requesting drm versions, replace the use of some numbers with + the respective macro defines in radeon_video.c, and add some more macro + defines. None of that really matters. + +2006-03-17 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONGetAccessibleVRAM), + (RADEONPreInitVRAM): + Add missing return statement (the driver would not start randomly), + add RV410 to the list of new generation cards for the memory map + setup and fix a bogus message. + +2006-03-16 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONInitCrtcRegisters), + (RADEONInitCrtc2Registers), (RADEONDoAdjustFrame): + Fix incorrect CRTC2_OFFSET values when using old-style dual head (not + MergedFB). Fixes Xinerama for me. + +2006-03-16 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONWaitForVerticalSync), + (RADEONWaitForVerticalSync2), (RADEONLoadPalette), + (RADEONScreenInit), (RADEONRestoreMemMapRegisters), + (RADEONRestoreCrtcRegisters), (RADEONRestoreCrtc2Registers), + (RADEONDoAdjustFrame), (RADEONCloseScreen): + * src/radeon_reg.h: + Add various workarounds that seem to fix some remaning lockup + scenarios I'm experiencing with the driver when setting the memory + map. Some of the magic delays are a bit dodgy but they seem to work, I + suppose I can't do better now without help from ATI. Also removed some + really too noisy debug messages. + +2006-03-15 Benjamin Herrenschmidt + + * src/radeon.h: + * src/radeon_dri.c: (RADEONDRIScreenInit), + (RADEONDRIDoCloseScreen), (RADEONDRIFinishScreenInit), + (RADEONDRIStop), (RADEONDRICloseScreen): + * src/radeon_driver.c: (RADEONCloseScreen): + Fix various issues with DRI & server recycle by putting DRICloseSreen + in the normal CloseScreen callback chain at a spot that matches the + call to DRIFinishScreenInit in order to unwrap at the right time. + +2006-03-13 Benjamin Herrenschmidt + + * src/radeon_video.c: (RADEONSetTransform): + Fix typo in the function setting the color space transformation + factors for old radeon + +2006-03-13 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONPreInitVRAM), + (RADEONPreInitChipType), (RADEONPreInit): + Earliest fix introduced a bug due to another chicken & egg problem in + card detection. Now split PreInitConfig into PreInitChipType and + PreInitVRAM so that PreInitDRI can be done just in between. Restores + proper AGPx4 functionality (when enabled) + +2006-03-12 Benjamin Herrenschmidt + + * src/ati.h: + * src/r128_dri.c: + * src/r128_driver.c: + * src/r128_probe.c: + * src/radeon_driver.c: + * src/radeon_mm_i2c.c: + * src/radeon_probe.c: + * src/radeon_video.c: + * src/radeon_vip.c: + * src/atipciids.h: + Stop using xf86PciInfo.h, instead use a local copy of the PCI IDs + we need in atipciids.h so we can update the ATI driver independently + of the server when new chips are added + +2006-03-10 Alan Coopersmith + + * src/radeon_driver.c: + Add #ifdef XF86DRI guards around references to info->allowPageFlip + and info->depthMoves, since they are only defined if building with + DRI. + +2006-03-10 Roland Scheidegger + * man/radeon.man: + * src/radeon_driver.c: (RADEONSetupMemXAA_DRI), (RADEONScreenInit): + Use "FBTexPercent" option for XAA too (only for increasing + memory reserved for textures). + +2006-03-10 Benjamin Herrenschmidt + + * src/radeon.h: + * src/radeon_dri.c: (RADEONDRIGartHeapInit), (RADEONDRIGetVersion), + (RADEONDRIScreenInit), (RADEONDRIInitPageFlip), (RADEONDRIResume), + (RADEONDRIAllocatePCIGARTTable): + * src/radeon_driver.c: (RADEONInitMemoryMap), + (RADEONGetAccessibleVRAM), (RADEONPreInitConfig), + (RADEONPreInitDRI), (RADEONPreInitColorTiling), (RADEONPreInit), + (RADEONScreenInit), (RADEONRestoreMode): + More memory map fixes !!! This time, we add a way to get the DRM + kernel module version early, in order to properly limit the + framebuffer size when a module that doesn't support the new map is + loaded. That will improve backward compatibility. I also made the + minimum required kernel module version 1.3 which hopefully shouldn't + be a problem for anybody, and cleaned up the ordering in which we test + for DRM version to enable features + +2006-03-09 Michel Dänzer + + * src/radeon_driver.c: (RADEONGetClockInfo), (RADEONGetVRamType), + (RADEONPreInitConfig): + Bugzilla #5766 + Patch #4636 + - Acknowledge that RN50 only has one CRTC, and use this to distinguish + it from RV100. + - Fix detection of RN50 memory type and bus width. + - Model RN50 memory bandwidth limits by capping the pixel clock range + based on memory clock, bpp and memory bus width. + (ATI Technologies Inc.) + +2006-03-03 Michel Dänzer + + * man/radeon.man: + * src/radeon_driver.c: (RADEONScreenInit): + * src/radeon_exa.c: (RADEONSetupMemEXA): + Add Option "FBTexPercent" to override the amount of video RAM reserved + for OpenGL textures with EXA. + +2006-03-02 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONPreInitConfig): + Fix the fix ... I didn't interpret PciInfo->size properly and forgot + that the function works in Kb not bytes... Ooops. + +2006-03-02 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONInitMemoryMap), + (RADEONPreInitConfig): + Extend the alignement workaround to post-rv280 chips as well (thanks + Hui) and also limit the CPU accessible memory to the size of the PCI + BAR size (yeah, it was passed to the driver, I just got blind for a + while it seems) + +2006-03-01 Benjamin Herrenschmidt + + * src/radeon_driver.c: (RADEONInitMemoryMap), + (RADEONPreInitConfig): + Workaround for rv280 bug which needs the framebuffer memory mapping + to be aligned to its own size. Also add back limit of 128Mb of mapped + fb space for now until I fully sort out what's up with dual function + cards. I would really need to access the PCI BAR sizes here but that + information seem to be missing from the PCI info passed to the driver. + +2006-02-27 Roland Scheidegger + * src/atichip.h: + * src/atichip.c: + * src/radeon_chipset.h: + Add the newly added (and tons of previously forgotten ones) pci ids + to the ati wrapper too (probably not required for it to work as + everything should default to radeon anyway there). + +2006-02-26 Benjamin Herrenschmidt + + * src/radeon.h: + * src/radeon_dri.c: (RADEONDRIFinishScreenInit), + (RADEONDRIInitPageFlip): + * src/radeon_driver.c: (RADEONScreenInit): + Fix page flipping with XAA. The new code ended up calling + ShadowFBInit() before XAAInit(), which breaks ShadowFB. + +2006-02-24 Roland Scheidegger + * src/radeon.h: + * src/radeon_chipset.h: + * src/radeon_driver.c: + * src/radeon_probe.c: + Add pci ids known to exist (see #4284 for instance). There are still + entries which probably don't really exist (cancelled cards and such), + leave them as-is. Fix the name of some entries, mostly based on the + .inf file of the newest catalyst driver. Use own family id for rv410 + and rs400, though there is no different code (yet?). + +2006-02-17 Benjamin Herrenschmidt + + * src/radeon.h: + * src/radeon_common.h: + * src/radeon_commonfuncs.c: (RADEONWaitForIdle): + * src/radeon_cursor.c: (RADEONCursorAllocEXA), + (RADEONSetCursorColors), (RADEONSetCursorPosition), + (RADEONLoadCursorImage), (RADEONHideCursor), (RADEONShowCursor), + (RADEONLoadCursorARGB), (RADEONCursorInit): + * src/radeon_dri.c: (RADEONDRIScreenInit), + (RADEONDRIFinishScreenInit), (RADEONDRICloseScreen), + (RADEONDRIRefreshArea): + * src/radeon_driver.c: (RADEONMapFB), (RADEONInitMemMapRegisters), + (RADEONInitMemoryMap), (RADEONGetAccessibleVRAM), + (RADEONPreInitConfig), (RADEONLoadPalette), (RADEONBlockHandler), + (RADEONScreenInit), (RADEONRestoreMemMapRegisters), + (RADEONAdjustMemMapRegisters), (RADEONRestoreSurfaces), + (RADEONSaveSurfaces), (RADEONChangeSurfaces), (RADEONRestoreMode), + (RADEONSaveMemMapRegisters), (RADEONSaveMode), (RADEONSave), + (RADEONInitDispBandwidth), (RADEONInitPLLRegisters), + (RADEONInitPLL2Registers), (RADEONInit), (RADEONModeInit), + (RADEONSaveScreen), (RADEONSwitchMode), (RADEONDoAdjustFrame), + (RADEONAdjustFrame), (RADEONEnterVT), (RADEONLeaveVT), + (RADEONCloseScreen), (RADEONDisplayPowerManagementSet): + * src/radeon_reg.h: + * src/radeon_render.c: (RADEONSetupRenderByteswap): + Memory map and misc fixes. This completely reworks the way the driver + detects available & accessible video memory and initializes the card + internal memory map. Along the way, I re-ordered some of the stuffs + in pre-init in order to remove some dodgy codepath, fixed various + init, exit and vt switch issues, and overall made the driver more + robust. The full memory map fix requires an updated DRM. The X driver + no longer tries to position the AGP aperture, this becomes entirely + DRM responsibility. + +2006-02-16 Benjamin Herrenschmidt + + * src/radeon_accel.c: (RADEONEngineRestore): + The engine setup would trigger a bogus line write before the proper + addresses are setup, thus causing the card to try to bus master over + the system bus to some stale location (usually 0 but could depend on + whatever was used before X). Remove that useless init bit, and always + setup some good enough engine source & destination pointers in case we + have some other spurrious engine activity going on. + +2006-02-13 Benjamin Herrenschmidt + + * src/radeon_exa_render.c: (R100TextureSetup), (R200TextureSetup): + Fix EXA acceleration of textures with byteswap or tiling + From John Clemens + +2006-02-06 Eric Anholt + + * src/radeon_exa_render.c: + Fix a copy'n'paste-o in the EXA render implementation that resulted in + [ax]8b8g8r8 pict formats not being supported on r200, but no other + issues. + +2006-01-19 Daniel Stone + + * src/radeon_driver.c: + Bug #5656: Set all Radeon XPRESS 200 R[CS]4xx-based chips to + have IsIGP = 1, fixing modesetting issues. + +2006-01-12 Alan Coopersmith + + * src/theatre200_module.c (theatre200VersRec): + * src/theatre_detect_module.c (theatre_detectVersRec): + XF86_VERSION_CURRENT -> XORG_VERSION_CURRENT + +2006-01-12 Alan Coopersmith + + * src/radeon_driver.c (RADEONPreInitModes): + When failing to parse MetaModes, reset CRT2pScrn to NULL after + free'ing it so we don't crash when trying to use it later + (such as in RADEONFreeRec). + +2006-01-08 Adam Jackson + + * src/radeon.h: + Bug #5523: Make radeon compile without USE_XAA. (Tilman Sauerbeck) + 2005-12-20 Kevin E. Martin * configure.ac: --- xserver-xorg-driver-ati-6.5.7.3.orig/configure +++ xserver-xorg-driver-ati-6.5.7.3/configure @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for xf86-video-ati 6.5.7.3. +# Generated by GNU Autoconf 2.59 for xf86-video-ati 6.5.8.0. # # Report bugs to . # @@ -280,15 +280,15 @@ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break @@ -423,8 +423,8 @@ # Identity of this package. PACKAGE_NAME='xf86-video-ati' PACKAGE_TARNAME='xf86-video-ati' -PACKAGE_VERSION='6.5.7.3' -PACKAGE_STRING='xf86-video-ati 6.5.7.3' +PACKAGE_VERSION='6.5.8.0' +PACKAGE_STRING='xf86-video-ati 6.5.8.0' PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg' ac_unique_file="Makefile.am" @@ -974,7 +974,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures xf86-video-ati 6.5.7.3 to adapt to many kinds of systems. +\`configure' configures xf86-video-ati 6.5.8.0 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1040,7 +1040,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of xf86-video-ati 6.5.7.3:";; + short | recursive ) echo "Configuration of xf86-video-ati 6.5.8.0:";; esac cat <<\_ACEOF @@ -1185,14 +1185,14 @@ else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi - cd $ac_popdir + cd "$ac_popdir" done fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF -xf86-video-ati configure 6.5.7.3 +xf86-video-ati configure 6.5.8.0 generated by GNU Autoconf 2.59 Copyright (C) 2003 Free Software Foundation, Inc. @@ -1206,7 +1206,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by xf86-video-ati $as_me 6.5.7.3, which was +It was created by xf86-video-ati $as_me 6.5.8.0, which was generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ @@ -1822,7 +1822,7 @@ # Define the identity of the package. PACKAGE='xf86-video-ati' - VERSION='6.5.7.3' + VERSION='6.5.8.0' cat >>confdefs.h <<_ACEOF @@ -2735,8 +2735,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2794,8 +2793,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2911,8 +2909,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2966,8 +2963,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3012,8 +3008,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3057,8 +3052,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3224,7 +3218,7 @@ # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && break + test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in @@ -3249,10 +3243,10 @@ fi done done -SED=$lt_cv_path_SED fi +SED=$lt_cv_path_SED echo "$as_me:$LINENO: result: $SED" >&5 echo "${ECHO_T}$SED" >&6 @@ -3329,7 +3323,7 @@ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. + # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &6 else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. + # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 @@ -3403,36 +3406,43 @@ # Let the user override the test. lt_cv_path_NM="$NM" else - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/${ac_tool_prefix}nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" break ;; *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac ;; esac - esac - fi + fi + done + IFS="$lt_save_ifs" done - IFS="$lt_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi @@ -3479,7 +3489,7 @@ lt_cv_deplibs_check_method=pass_all ;; -bsdi4*) +bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so @@ -3502,13 +3512,13 @@ lt_cv_deplibs_check_method=pass_all ;; -freebsd* | kfreebsd*-gnu) +freebsd* | kfreebsd*-gnu | dragonfly*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; @@ -3524,7 +3534,7 @@ hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file - case "$host_cpu" in + case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so @@ -3540,6 +3550,11 @@ esac ;; +interix3*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; @@ -3552,19 +3567,10 @@ # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; -netbsd*) +netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else @@ -3583,12 +3589,10 @@ ;; openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; @@ -3596,15 +3600,11 @@ lt_cv_deplibs_check_method=pass_all ;; -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - solaris*) lt_cv_deplibs_check_method=pass_all ;; -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' @@ -3625,10 +3625,13 @@ siemens) lt_cv_deplibs_check_method=pass_all ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; esac ;; -sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*) +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; esac @@ -3646,6 +3649,9 @@ # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + # Allow CC to be a program name with arguments. compiler=$CC @@ -3681,7 +3687,7 @@ ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 3684 "configure"' > conftest.$ac_ext + echo '#line 3690 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -3724,7 +3730,7 @@ ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*linux*) @@ -3801,8 +3807,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3837,6 +3842,26 @@ CFLAGS="$SAVE_CFLAGS" fi ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) LD="${LD-ld} -64" ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + esac @@ -4111,8 +4136,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4282,8 +4306,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4350,8 +4373,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4611,8 +4633,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4670,8 +4691,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4742,8 +4762,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4787,8 +4806,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4923,7 +4941,12 @@ fi -ac_ext=cc + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -5153,6 +5176,8 @@ ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi + ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' @@ -5246,7 +5271,7 @@ # Provide some information about the compiler. -echo "$as_me:5249:" \ +echo "$as_me:5274:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -5292,8 +5317,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5342,8 +5366,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5436,11 +5459,55 @@ lt_cv_sys_max_cmd_len=8192; ;; - *) + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ = "XX$teststring") >/dev/null 2>&1 && new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && @@ -5486,9 +5553,6 @@ # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" @@ -5510,15 +5574,31 @@ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; -solaris* | sysv5*) +solaris*) symcode='[BDRT]' ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; sysv4) symcode='[DFNSTU]' ;; @@ -5541,8 +5621,11 @@ # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no @@ -5704,7 +5787,7 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' +Xsed='sed -e 1s/^X//' sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' # Same as above, but do not quote variable references. @@ -5724,7 +5807,7 @@ default_ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except M$VC, +# All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" @@ -5981,6 +6064,7 @@ test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" @@ -6000,15 +6084,26 @@ if test -n "$RANLIB"; then case $host_os in openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) @@ -6034,7 +6129,7 @@ if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then @@ -6096,7 +6191,7 @@ if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then @@ -6191,68 +6286,25 @@ # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + # Allow CC to be a program name with arguments. compiler=$CC -# -# Check for any special shared library compilation flags. -# -lt_prog_cc_shlib= -if test "$GCC" = no; then - case $host_os in - sco3.2v5*) - lt_prog_cc_shlib='-belf' - ;; - esac -fi -if test -n "$lt_prog_cc_shlib"; then - { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5 -echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;} - if echo "$old_CC $old_CFLAGS " | grep "[ ]$lt_prog_cc_shlib[ ]" >/dev/null; then : - else - { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 -echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} - lt_cv_prog_cc_can_build_shared=no - fi -fi - - -# -# Check to make sure the static flag actually works. -# -echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6 -if test "${lt_prog_compiler_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_prog_compiler_static" - printf "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - else - lt_prog_compiler_static_works=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" - -fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 -echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 - -if test x"$lt_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= -fi - +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* @@ -6277,18 +6329,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6283: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6335: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6287: \$? = $ac_status" >&5 + echo "$as_me:6339: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi @@ -6349,6 +6403,11 @@ lt_prog_compiler_pic='-fno-common' ;; + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. @@ -6365,7 +6424,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -6391,6 +6450,16 @@ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic='-qnocommon' + lt_prog_compiler_wl='-Wl,' + ;; + esac + ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being @@ -6402,7 +6471,7 @@ lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -6426,12 +6495,19 @@ ;; linux*) - case $CC in + case $cc_basename in icc* | ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. @@ -6446,15 +6522,15 @@ lt_prog_compiler_static='-non_shared' ;; - sco3.2v5*) - lt_prog_compiler_pic='-Kpic' - lt_prog_compiler_static='-dn' - ;; - solaris*) - lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac ;; sunos4*) @@ -6463,7 +6539,7 @@ lt_prog_compiler_static='-Bstatic' ;; - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' @@ -6476,6 +6552,17 @@ fi ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' @@ -6510,18 +6597,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6516: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6603: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6520: \$? = $ac_status" >&5 + echo "$as_me:6607: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_prog_compiler_pic_works=yes fi fi @@ -6542,7 +6631,7 @@ fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= @@ -6552,6 +6641,48 @@ ;; esac +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 +if test "${lt_prog_compiler_static_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_static_works=yes + fi + else + lt_prog_compiler_static_works=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 +echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 + +if test x"$lt_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 if test "${lt_cv_prog_compiler_c_o+set}" = set; then @@ -6570,23 +6701,25 @@ # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6576: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6707: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:6580: \$? = $ac_status" >&5 + echo "$as_me:6711: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi - chmod u+w . + chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation @@ -6662,6 +6795,16 @@ # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) @@ -6672,6 +6815,10 @@ with_gnu_ld=no fi ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; openbsd*) with_gnu_ld=no ;; @@ -6682,6 +6829,27 @@ # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) @@ -6732,10 +6900,10 @@ allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -6744,13 +6912,60 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + interix3*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + link_all_deplibs=no else ld_shlibs=no fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= @@ -6760,7 +6975,7 @@ fi ;; - solaris* | sysv5*) + solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <&2 @@ -6781,6 +6996,33 @@ fi ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= @@ -6788,31 +7030,6 @@ hardcode_shlibpath_var=no ;; - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_cmds="$tmp_archive_cmds" - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ -cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ -$echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - else - archive_expsym_cmds="$tmp_archive_cmds" - fi - else - ld_shlibs=no - fi - ;; - *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' @@ -6823,16 +7040,11 @@ ;; esac - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) @@ -6844,7 +7056,7 @@ # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported @@ -6878,6 +7090,7 @@ break fi done + ;; esac exp_sym_flag='-bexport' @@ -6896,7 +7109,7 @@ link_all_deplibs=yes if test "$GCC" = yes; then - case $host_os in aix4.012|aix4.012.*) + case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -6915,8 +7128,12 @@ hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi + ;; esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -6924,11 +7141,11 @@ # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then + if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' - fi + fi fi fi @@ -6964,8 +7181,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6993,12 +7209,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF @@ -7025,8 +7241,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7058,13 +7273,11 @@ # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols=yes # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec=' ' + whole_archive_flag_spec='$convenience' archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -7077,7 +7290,7 @@ ld_shlibs=no ;; - bsdi4*) + bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; @@ -7103,52 +7316,52 @@ ;; darwin* | rhapsody*) - if test "$GXX" = yes ; then + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac archive_cmds_need_lc=no - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag='-flat_namespace -undefined suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - 10.*) - allow_undefined_flag='-undefined dynamic_lookup' - ;; - esac - fi - ;; - esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - module_cmds='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='-all_load $convenience' + whole_archive_flag_spec='' link_all_deplibs=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else - ld_shlibs=no + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs=no + ;; + esac fi ;; @@ -7182,11 +7395,20 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu) + freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # GNU/kFreeBSD uses gcc -shared to do shared libraries. + kfreebsd*-gnu) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no + link_all_deplibs=no ;; hpux9*) @@ -7205,47 +7427,62 @@ export_dynamic_flag_spec='${wl}-E' ;; - hpux10* | hpux11*) + hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*|ia64*) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + hardcode_direct=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; + ia64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; *) archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else - case "$host_cpu" in - hppa*64*|ia64*) - archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_libdir_separator=: - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - ia64*) - hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=no hardcode_shlibpath_var=no - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes ;; *) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: hardcode_direct=yes export_dynamic_flag_spec='${wl}-E' @@ -7269,7 +7506,7 @@ link_all_deplibs=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -7293,6 +7530,7 @@ hardcode_shlibpath_var=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else @@ -7338,7 +7576,7 @@ allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' @@ -7346,21 +7584,15 @@ hardcode_libdir_separator=: ;; - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - solaris*) no_undefined_flag=' -z text' if test "$GCC" = yes; then + wlarc='${wl}' archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else + wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' @@ -7369,8 +7601,18 @@ hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + *) + whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; esac link_all_deplibs=yes ;; @@ -7427,36 +7669,45 @@ fi ;; - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; + runpath_var='LD_RUN_PATH' - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no ;; - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi ;; uts4*) @@ -7475,11 +7726,6 @@ echo "${ECHO_T}$ld_shlibs" >&6 test "$ld_shlibs" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - # # Do we need to explicitly link libc? # @@ -7512,6 +7758,7 @@ libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= @@ -7644,7 +7891,7 @@ shlibpath_var=LIBRARY_PATH ;; -bsdi4*) +bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -7672,7 +7919,8 @@ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -7702,7 +7950,7 @@ ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; @@ -7725,7 +7973,7 @@ soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -7760,8 +8008,17 @@ dynamic_linker='GNU ld.so' ;; -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -7779,14 +8036,19 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - freebsd3.01* | freebsdelf3.01*) + freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; - *) # from 3.2 on + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; esac ;; @@ -7806,7 +8068,7 @@ version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes @@ -7846,6 +8108,18 @@ postinstall_cmds='chmod 555 $lib' ;; +interix3*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; @@ -7903,31 +8177,10 @@ # before this can be enabled. hardcode_into_libs=yes - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) - echo '#line 7910 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - esac - fi - rm -rf conftest* - ;; - esac - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -7939,6 +8192,18 @@ dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + knetbsd*-gnu) version_type=linux need_lib_prefix=no @@ -7988,8 +8253,13 @@ openbsd*) version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no - need_version=yes + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH @@ -8027,13 +8297,6 @@ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; - solaris*) version_type=linux need_lib_prefix=no @@ -8059,7 +8322,7 @@ need_version=yes ;; -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' @@ -8092,6 +8355,29 @@ fi ;; +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -8107,12 +8393,17 @@ echo "${ECHO_T}$dynamic_linker" >&6 test "$dynamic_linker" = no && can_build_shared=no +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 hardcode_action= if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var " || \ - test "X$hardcode_automatic"="Xyes" ; then + test -n "$runpath_var" || \ + test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct" != no && @@ -8238,8 +8529,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8342,8 +8632,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8408,8 +8697,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8502,8 +8790,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8568,8 +8855,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8635,8 +8921,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8702,8 +8987,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8762,7 +9046,7 @@ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" @@ -8778,7 +9062,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed @@ -8864,7 +9150,7 @@ echo "${ECHO_T}$lt_cv_dlopen_self" >&6 if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 if test "${lt_cv_dlopen_self_static+set}" = set; then @@ -8876,7 +9162,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed @@ -8980,7 +9268,7 @@ fi -# Report which librarie types wil actually be built +# Report which library types will actually be built echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $can_build_shared" >&5 @@ -8992,7 +9280,7 @@ # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -9005,43 +9293,6 @@ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi - ;; - darwin* | rhapsody*) - if test "$GCC" = yes; then - archive_cmds_need_lc=no - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag='-flat_namespace -undefined suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - 10.*) - allow_undefined_flag='-undefined dynamic_lookup' - ;; - esac - fi - ;; - esac - output_verbose_link_cmd='echo' - archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' - module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='-all_load $convenience' - link_all_deplibs=yes - else - ld_shlibs=no - fi ;; esac echo "$as_me:$LINENO: result: $enable_shared" >&5 @@ -9067,7 +9318,7 @@ # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ @@ -9171,7 +9422,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -9182,11 +9433,11 @@ SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e s/^X//" +Xsed="$SED -e 1s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= @@ -9216,6 +9467,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -9227,6 +9484,9 @@ # A C compiler. LTCC=$lt_LTCC +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + # A language-specific compiler. CC=$lt_compiler @@ -9292,7 +9552,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -9557,6 +9817,9 @@ echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} fi fi + if test -z "$LTCFLAGS"; then + eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" + fi # Extract list of available tagged configurations in $ofile. # Note that this assumes the entire list is on one line. @@ -9587,7 +9850,9 @@ case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -9607,6 +9872,7 @@ hardcode_libdir_flag_spec_ld_CXX= hardcode_libdir_separator_CXX= hardcode_minus_L_CXX=no +hardcode_shlibpath_var_CXX=unsupported hardcode_automatic_CXX=no module_cmds_CXX= module_expsym_cmds_CXX= @@ -9624,7 +9890,7 @@ compiler_lib_search_path_CXX= # Source file extension for C++ test sources. -ac_ext=cc +ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o @@ -9634,17 +9900,34 @@ lt_simple_compile_test_code="int some_variable = 0;\n" # Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *) { return(0); }\n' +lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + # Allow CC to be a program name with arguments. compiler=$CC +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD @@ -9655,18 +9938,27 @@ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else - unset lt_cv_prog_gnu_ld + $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else - unset lt_cv_path_LD + $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC compiler_CXX=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately @@ -9737,7 +10029,7 @@ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. + # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &6 else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. + # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9978,12 +10274,12 @@ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF @@ -10010,8 +10306,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10043,16 +10338,26 @@ # -berok will link without error, but may produce a broken library. no_undefined_flag_CXX=' ${wl}-bernotok' allow_undefined_flag_CXX=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols_CXX=yes # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_CXX=' ' + whole_archive_flag_spec_CXX='$convenience' archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_CXX=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_CXX=no + fi + ;; + chorus*) case $cc_basename in *) @@ -10071,7 +10376,7 @@ enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -10080,70 +10385,81 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_CXX=no fi ;; - - darwin* | rhapsody*) - if test "$GXX" = yes; then - archive_cmds_need_lc_CXX=no - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag_CXX='-undefined suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_CXX='-flat_namespace -undefined suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_CXX='-flat_namespace -undefined suppress' - ;; - 10.*) - allow_undefined_flag_CXX='-undefined dynamic_lookup' - ;; + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; esac - fi - ;; - esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - module_cmds_CXX='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + archive_cmds_need_lc_CXX=no + hardcode_direct_CXX=no + hardcode_automatic_CXX=yes + hardcode_shlibpath_var_CXX=unsupported + whole_archive_flag_spec_CXX='' + link_all_deplibs_CXX=yes - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - hardcode_direct_CXX=no - hardcode_automatic_CXX=yes - hardcode_shlibpath_var_CXX=unsupported - whole_archive_flag_spec_CXX='-all_load $convenience' - link_all_deplibs_CXX=yes - else - ld_shlibs_CXX=no - fi - ;; + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_CXX=no + ;; + esac + fi + ;; dgux*) case $cc_basename in - ec++) + ec++*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - ghcx) + ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -10154,14 +10470,14 @@ ;; esac ;; - freebsd12*) + freebsd[12]*) # C++ shared libraries reported to be fairly broken before switch to ELF ld_shlibs_CXX=no ;; freebsd-elf*) archive_cmds_need_lc_CXX=no ;; - freebsd* | kfreebsd*-gnu) + freebsd* | kfreebsd*-gnu | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions ld_shlibs_CXX=yes @@ -10178,11 +10494,11 @@ # location of the library. case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - aCC) + aCC*) archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -10192,7 +10508,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then @@ -10206,33 +10522,22 @@ ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then - case "$host_cpu" in - hppa*64*) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + case $host_cpu in + hppa*64*|ia64*) hardcode_libdir_flag_spec_ld_CXX='+b $libdir' - hardcode_libdir_separator_CXX=: - ;; - ia64*) - hardcode_libdir_flag_spec_CXX='-L$libdir' ;; *) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: export_dynamic_flag_spec_CXX='${wl}-E' ;; esac fi - case "$host_cpu" in - hppa*64*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - ;; - ia64*) + case $host_cpu in + hppa*64*|ia64*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. ;; *) hardcode_direct_CXX=yes @@ -10243,14 +10548,17 @@ esac case $cc_basename in - CC) + CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - aCC) - case "$host_cpu" in - hppa*64*|ia64*) - archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + aCC*) + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' @@ -10269,9 +10577,12 @@ *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then - case "$host_cpu" in - ia64*|hppa*64*) - archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' @@ -10285,11 +10596,25 @@ ;; esac ;; + interix3*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; irix5* | irix6*) case $cc_basename in - CC) + CC*) # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -10300,7 +10625,7 @@ *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi @@ -10313,7 +10638,7 @@ ;; linux*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file @@ -10338,17 +10663,41 @@ # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; - icpc) + icpc*) # Intel C++ with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac archive_cmds_need_lc_CXX=no - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; - cxx) + pgCC*) + # Portland Group C++ compiler + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) # Compaq C++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' @@ -10379,7 +10728,7 @@ ;; mvs*) case $cc_basename in - cxx) + cxx*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; @@ -10389,7 +10738,7 @@ ;; esac ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= @@ -10400,9 +10749,25 @@ # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; + openbsd2*) + # C++ shared libraries are fairly broken + ld_shlibs_CXX=no + ;; + openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + export_dynamic_flag_spec_CXX='${wl}-E' + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; osf3*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file @@ -10418,14 +10783,14 @@ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; - RCC) + RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - cxx) + cxx*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: @@ -10443,7 +10808,7 @@ *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: @@ -10462,7 +10827,7 @@ ;; osf4* | osf5*) case $cc_basename in - KCC) + KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file @@ -10477,17 +10842,17 @@ # the KAI C++ compiler. old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; - RCC) + RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - cxx) + cxx*) allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ $rm $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' @@ -10506,7 +10871,7 @@ *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: @@ -10527,27 +10892,14 @@ # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - sco*) - archive_cmds_need_lc_CXX=no - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; sunos4*) case $cc_basename in - CC) + CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; - lcc) + lcc*) # Lucid # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -10560,36 +10912,33 @@ ;; solaris*) case $cc_basename in - CC) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ + archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no case $host_os in - solaris2.0-5 | solaris2.0-5.*) ;; + solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The C++ compiler is used as linker so we must use $wl # flag to pass the commands to the underlying system - # linker. + # linker. We must also pass each convience library through + # to the system linker between allextract/defaultextract. + # The C++ compiler will combine linker options so we + # cannot just pass the convience library names through + # without $wl. # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; esac link_all_deplibs_CXX=yes - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -10597,7 +10946,7 @@ # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; - gcx) + gcx*) # Green Hills C++ Compiler archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' @@ -10635,12 +10984,63 @@ ;; esac ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag_CXX='${wl}-z,text' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + # So that behaviour is only enabled if SCOABSPATH is set to a + # non-empty value in the environment. Most likely only useful for + # creating official distributions of packages. + # This is a hack until libtool officially supports absolute path + # names for shared libraries. + no_undefined_flag_CXX='${wl}-z,text' + allow_undefined_flag_CXX='${wl}-z,nodefs' archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + export_dynamic_flag_spec_CXX='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac ;; tandem*) case $cc_basename in - NCC) + NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -10693,7 +11093,7 @@ # The `*' in the case matches for architectures that use `case' in # $output_verbose_cmd can trigger glob expansion during the loop # eval without this substitution. - output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" + output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` for p in `eval $output_verbose_link_cmd`; do case $p in @@ -10769,6 +11169,29 @@ $rm -f confest.$objext +# PORTME: override above test on systems where it is broken +case $host_os in +interix3*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + predep_objects_CXX= + postdep_objects_CXX= + postdeps_CXX= + ;; + +solaris*) + case $cc_basename in + CC*) + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + postdeps_CXX='-lCstd -lCrun' + ;; + esac + ;; +esac + + case " $postdeps_CXX " in *" -lc "*) archive_cmds_need_lc_CXX=no ;; esac @@ -10816,6 +11239,10 @@ # DJGPP does not support shared libraries at all lt_prog_compiler_pic_CXX= ;; + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_CXX=-Kconform_pic @@ -10824,7 +11251,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) ;; *) @@ -10849,18 +11276,28 @@ ;; chorus*) case $cc_basename in - cxch68) + cxch68*) # Green Hills C++ Compiler # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_CXX='-qnocommon' + lt_prog_compiler_wl_CXX='-Wl,' + ;; + esac + ;; dgux*) case $cc_basename in - ec++) + ec++*) lt_prog_compiler_pic_CXX='-KPIC' ;; - ghcx) + ghcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-pic' ;; @@ -10868,22 +11305,22 @@ ;; esac ;; - freebsd* | kfreebsd*-gnu) + freebsd* | kfreebsd*-gnu | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in - CC) + CC*) lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then lt_prog_compiler_pic_CXX='+Z' fi ;; - aCC) + aCC*) lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - case "$host_cpu" in + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -10896,9 +11333,13 @@ ;; esac ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; irix5* | irix6* | nonstopux*) case $cc_basename in - CC) + CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-non_shared' # CC pic flag -KPIC is the default. @@ -10909,18 +11350,24 @@ ;; linux*) case $cc_basename in - KCC) + KCC*) # KAI C++ Compiler lt_prog_compiler_wl_CXX='--backend -Wl,' lt_prog_compiler_pic_CXX='-fPIC' ;; - icpc) + icpc* | ecpc*) # Intel C++ lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-static' ;; - cxx) + pgCC*) + # Portland Group C++ compiler. + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-fpic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. @@ -10937,25 +11384,25 @@ ;; mvs*) case $cc_basename in - cxx) + cxx*) lt_prog_compiler_pic_CXX='-W c,exportall' ;; *) ;; esac ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) ;; osf3* | osf4* | osf5*) case $cc_basename in - KCC) + KCC*) lt_prog_compiler_wl_CXX='--backend -Wl,' ;; - RCC) + RCC*) # Rational C++ 2.4.1 lt_prog_compiler_pic_CXX='-pic' ;; - cxx) + cxx*) # Digital/Compaq C++ lt_prog_compiler_wl_CXX='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha @@ -10969,24 +11416,15 @@ ;; psos*) ;; - sco*) - case $cc_basename in - CC) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - *) - ;; - esac - ;; solaris*) case $cc_basename in - CC) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; - gcx) + gcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-PIC' ;; @@ -10996,12 +11434,12 @@ ;; sunos4*) case $cc_basename in - CC) + CC*) # Sun C++ 4.x lt_prog_compiler_pic_CXX='-pic' lt_prog_compiler_static_CXX='-Bstatic' ;; - lcc) + lcc*) # Lucid lt_prog_compiler_pic_CXX='-pic' ;; @@ -11011,7 +11449,7 @@ ;; tandem*) case $cc_basename in - NCC) + NCC*) # NonStop-UX NCC 3.20 lt_prog_compiler_pic_CXX='-KPIC' ;; @@ -11019,7 +11457,14 @@ ;; esac ;; - unixware*) + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + esac ;; vxworks*) ;; @@ -11052,18 +11497,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11058: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11503: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11062: \$? = $ac_status" >&5 + echo "$as_me:11507: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_prog_compiler_pic_works_CXX=yes fi fi @@ -11084,7 +11531,7 @@ fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= @@ -11094,6 +11541,48 @@ ;; esac +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 +if test "${lt_prog_compiler_static_works_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_static_works_CXX=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_static_works_CXX=yes + fi + else + lt_prog_compiler_static_works_CXX=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5 +echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6 + +if test x"$lt_prog_compiler_static_works_CXX" = xyes; then + : +else + lt_prog_compiler_static_CXX= +fi + + echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then @@ -11112,23 +11601,25 @@ # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11118: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11607: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11122: \$? = $ac_status" >&5 + echo "$as_me:11611: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi - chmod u+w . + chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation @@ -11183,7 +11674,13 @@ export_symbols_cmds_CXX="$ltdll_cmds" ;; cygwin* | mingw*) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + kfreebsd*-gnu) + link_all_deplibs_CXX=no + ;; + linux*) + link_all_deplibs_CXX=no ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' @@ -11194,11 +11691,6 @@ echo "${ECHO_T}$ld_shlibs_CXX" >&6 test "$ld_shlibs_CXX" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - # # Do we need to explicitly link libc? # @@ -11231,6 +11723,7 @@ libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_CXX + pic_flag=$lt_prog_compiler_pic_CXX compiler_flags=-v linker_flags=-v verstring= @@ -11363,7 +11856,7 @@ shlibpath_var=LIBRARY_PATH ;; -bsdi4*) +bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -11391,7 +11884,8 @@ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -11421,7 +11915,7 @@ ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; @@ -11444,7 +11938,7 @@ soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -11479,8 +11973,17 @@ dynamic_linker='GNU ld.so' ;; -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -11498,14 +12001,19 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - freebsd3.01* | freebsdelf3.01*) + freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; - *) # from 3.2 on + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; esac ;; @@ -11525,7 +12033,7 @@ version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes @@ -11565,6 +12073,18 @@ postinstall_cmds='chmod 555 $lib' ;; +interix3*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; @@ -11622,31 +12142,10 @@ # before this can be enabled. hardcode_into_libs=yes - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) - echo '#line 11629 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - esac - fi - rm -rf conftest* - ;; - esac - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -11658,6 +12157,18 @@ dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + knetbsd*-gnu) version_type=linux need_lib_prefix=no @@ -11707,8 +12218,13 @@ openbsd*) version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no - need_version=yes + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH @@ -11746,13 +12262,6 @@ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; - solaris*) version_type=linux need_lib_prefix=no @@ -11778,7 +12287,7 @@ need_version=yes ;; -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' @@ -11811,6 +12320,29 @@ fi ;; +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -11826,12 +12358,17 @@ echo "${ECHO_T}$dynamic_linker" >&6 test "$dynamic_linker" = no && can_build_shared=no +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || \ - test -n "$runpath_var CXX" || \ - test "X$hardcode_automatic_CXX"="Xyes" ; then + test -n "$runpath_var_CXX" || \ + test "X$hardcode_automatic_CXX" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_CXX" != no && @@ -11863,1200 +12400,374 @@ enable_fast_install=needless fi -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - ;; - *) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - ;; - esac -fi - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_CXX \ + CC_CXX \ + LD_CXX \ + lt_prog_compiler_wl_CXX \ + lt_prog_compiler_pic_CXX \ + lt_prog_compiler_static_CXX \ + lt_prog_compiler_no_builtin_flag_CXX \ + export_dynamic_flag_spec_CXX \ + thread_safe_flag_spec_CXX \ + whole_archive_flag_spec_CXX \ + enable_shared_with_static_runtimes_CXX \ + old_archive_cmds_CXX \ + old_archive_from_new_cmds_CXX \ + predep_objects_CXX \ + postdep_objects_CXX \ + predeps_CXX \ + postdeps_CXX \ + compiler_lib_search_path_CXX \ + archive_cmds_CXX \ + archive_expsym_cmds_CXX \ + postinstall_cmds_CXX \ + postuninstall_cmds_CXX \ + old_archive_from_expsyms_cmds_CXX \ + allow_undefined_flag_CXX \ + no_undefined_flag_CXX \ + export_symbols_cmds_CXX \ + hardcode_libdir_flag_spec_CXX \ + hardcode_libdir_flag_spec_ld_CXX \ + hardcode_libdir_separator_CXX \ + hardcode_automatic_CXX \ + module_cmds_CXX \ + module_expsym_cmds_CXX \ + lt_cv_prog_compiler_c_o_CXX \ + exclude_expsyms_CXX \ + include_expsyms_CXX; do - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; + case $var in + old_archive_cmds_CXX | \ + old_archive_from_new_cmds_CXX | \ + archive_cmds_CXX | \ + archive_expsym_cmds_CXX | \ + module_cmds_CXX | \ + module_expsym_cmds_CXX | \ + old_archive_from_expsyms_cmds_CXX | \ + export_symbols_cmds_CXX | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac - darwin*) - # if libdl is installed we need to link against it - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +cfgfile="$ofile" -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL -fi +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared - ;; +# Whether or not to build static libraries. +build_old_libs=$enable_static - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_CXX -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX -#ifdef __STDC__ -# include -#else -# include -#endif +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install -#undef shl_load +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os -int -main () -{ -return f != shl_load; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# An echo program that does not interpret backslashes. +echo=$lt_echo -ac_cv_func_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# A C compiler. +LTCC=$lt_LTCC -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +# A language-specific compiler. +CC=$lt_compiler_CXX -#ifdef __STDC__ -# include -#else -# include -#endif +# Is the compiler the GNU C compiler? +with_gcc=$GCC_CXX -#undef dlopen +# An ERE matcher. +EGREP=$lt_EGREP -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} -#endif +# The linker used to build libraries. +LD=$lt_LD_CXX -int -main () -{ -return f != dlopen; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Whether we need hard or soft links. +LN_S=$lt_LN_S -ac_cv_func_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +# A BSD-compatible nm program. +NM=$lt_NM -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# A symbol stripping program +STRIP=$lt_STRIP -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -int -main () -{ -dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Used on cygwin: assembler. +AS="$AS" -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi +# The name of the directory that contains temporary libtool files. +objdir=$objdir +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds -fi +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_CXX +# Object file suffix (normally "o"). +objext="$ac_objext" -fi +# Old archive suffix (normally "a"). +libext="$libext" +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' -fi +# Executable file suffix (normally ""). +exeext="$exeext" +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_CXX +pic_mode=$pic_mode -fi +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX -fi +# Must we lock files when doing compilation? +need_locks=$lt_need_locks - ;; - esac +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi +# Do we need a version for libraries? +need_version=$need_version - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +# Whether dlopen is supported. +dlopen_support=$enable_dlopen - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX -#include +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX -#ifdef __cplusplus -extern "C" void exit (int); -#endif +# Library versioning type. +version_type=$version_type -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; +# Format of library name prefix. +libname_spec=$lt_libname_spec - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_CXX +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_CXX +archive_expsym_cmds=$lt_archive_expsym_cmds_CXX +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds -#include +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_CXX +module_expsym_cmds=$lt_module_expsym_cmds_CXX -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_CXX -#ifdef __cplusplus -extern "C" void exit (int); -#endif +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_CXX -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_CXX - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_CXX - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_CXX +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_CXX - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_CXX - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_CXX \ - CC_CXX \ - LD_CXX \ - lt_prog_compiler_wl_CXX \ - lt_prog_compiler_pic_CXX \ - lt_prog_compiler_static_CXX \ - lt_prog_compiler_no_builtin_flag_CXX \ - export_dynamic_flag_spec_CXX \ - thread_safe_flag_spec_CXX \ - whole_archive_flag_spec_CXX \ - enable_shared_with_static_runtimes_CXX \ - old_archive_cmds_CXX \ - old_archive_from_new_cmds_CXX \ - predep_objects_CXX \ - postdep_objects_CXX \ - predeps_CXX \ - postdeps_CXX \ - compiler_lib_search_path_CXX \ - archive_cmds_CXX \ - archive_expsym_cmds_CXX \ - postinstall_cmds_CXX \ - postuninstall_cmds_CXX \ - old_archive_from_expsyms_cmds_CXX \ - allow_undefined_flag_CXX \ - no_undefined_flag_CXX \ - export_symbols_cmds_CXX \ - hardcode_libdir_flag_spec_CXX \ - hardcode_libdir_flag_spec_ld_CXX \ - hardcode_libdir_separator_CXX \ - hardcode_automatic_CXX \ - module_cmds_CXX \ - module_expsym_cmds_CXX \ - lt_cv_prog_compiler_c_o_CXX \ - exclude_expsyms_CXX \ - include_expsyms_CXX; do +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - case $var in - old_archive_cmds_CXX | \ - old_archive_from_new_cmds_CXX | \ - archive_cmds_CXX | \ - archive_expsym_cmds_CXX | \ - module_cmds_CXX | \ - module_expsym_cmds_CXX | \ - old_archive_from_expsyms_cmds_CXX | \ - export_symbols_cmds_CXX | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -cfgfile="$ofile" +# This is the shared library runtime path variable. +runpath_var=$runpath_var - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname +# This is the shared library path variable. +shlibpath_var=$shlibpath_var -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_CXX -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs -# Whether or not to build static libraries. -build_old_libs=$enable_static +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_CXX +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_CXX -# The host system. -host_alias=$host_alias -host=$host +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_CXX -# An echo program that does not interpret backslashes. -echo=$lt_echo +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_CXX -# A C compiler. -LTCC=$lt_LTCC +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" -# A language-specific compiler. -CC=$lt_compiler_CXX - -# Is the compiler the GNU C compiler? -with_gcc=$GCC_CXX - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_LD_CXX - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_CXX - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_CXX -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_CXX - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_CXX -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_CXX -archive_expsym_cmds=$lt_archive_expsym_cmds_CXX -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_CXX -module_expsym_cmds=$lt_module_expsym_cmds_CXX - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_CXX - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_CXX - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_CXX - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_CXX - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_CXX - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_CXX - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_CXX - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_CXX - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_CXX - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_CXX - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_CXX - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_CXX +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_CXX # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec @@ -13166,16 +12877,42 @@ # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + # Allow CC to be a program name with arguments. compiler=$CC +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${F77-"f77"} compiler=$CC compiler_F77=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 @@ -13188,7 +12925,7 @@ # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -13197,7 +12934,9 @@ fi ;; aix4* | aix5*) - test "$enable_shared" = yes && enable_static=no + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi ;; esac echo "$as_me:$LINENO: result: $enable_shared" >&5 @@ -13210,8 +12949,6 @@ echo "$as_me:$LINENO: result: $enable_static" >&5 echo "${ECHO_T}$enable_static" >&6 -test "$ld_shlibs_F77" = no && can_build_shared=no - GCC_F77="$G77" LD_F77="$LD" @@ -13258,6 +12995,11 @@ lt_prog_compiler_pic_F77='-fno-common' ;; + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. @@ -13274,7 +13016,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -13300,6 +13042,16 @@ lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' fi ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_F77='-qnocommon' + lt_prog_compiler_wl_F77='-Wl,' + ;; + esac + ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being @@ -13311,7 +13063,7 @@ lt_prog_compiler_wl_F77='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -13335,12 +13087,19 @@ ;; linux*) - case $CC in + case $cc_basename in icc* | ecc*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-static' ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-fpic' + lt_prog_compiler_static_F77='-Bstatic' + ;; ccc*) lt_prog_compiler_wl_F77='-Wl,' # All Alpha code is PIC. @@ -13355,15 +13114,15 @@ lt_prog_compiler_static_F77='-non_shared' ;; - sco3.2v5*) - lt_prog_compiler_pic_F77='-Kpic' - lt_prog_compiler_static_F77='-dn' - ;; - solaris*) - lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl_F77='-Qoption ld ';; + *) + lt_prog_compiler_wl_F77='-Wl,';; + esac ;; sunos4*) @@ -13372,7 +13131,7 @@ lt_prog_compiler_static_F77='-Bstatic' ;; - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' @@ -13385,9 +13144,20 @@ fi ;; - uts4*) - lt_prog_compiler_pic_F77='-pic' - lt_prog_compiler_static_F77='-Bstatic' + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_can_build_shared_F77=no + ;; + + uts4*) + lt_prog_compiler_pic_F77='-pic' + lt_prog_compiler_static_F77='-Bstatic' ;; *) @@ -13419,18 +13189,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13425: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13195: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13429: \$? = $ac_status" >&5 + echo "$as_me:13199: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_prog_compiler_pic_works_F77=yes fi fi @@ -13451,7 +13223,7 @@ fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_F77= @@ -13461,6 +13233,48 @@ ;; esac +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" +echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 +if test "${lt_prog_compiler_static_works_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_static_works_F77=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_static_works_F77=yes + fi + else + lt_prog_compiler_static_works_F77=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5 +echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6 + +if test x"$lt_prog_compiler_static_works_F77" = xyes; then + : +else + lt_prog_compiler_static_F77= +fi + + echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then @@ -13479,23 +13293,25 @@ # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13485: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13299: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:13489: \$? = $ac_status" >&5 + echo "$as_me:13303: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_F77=yes fi fi - chmod u+w . + chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation @@ -13571,6 +13387,16 @@ # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) @@ -13581,6 +13407,10 @@ with_gnu_ld=no fi ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; openbsd*) with_gnu_ld=no ;; @@ -13591,6 +13421,27 @@ # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_F77='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_F77= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) @@ -13641,10 +13492,10 @@ allow_undefined_flag_F77=unsupported always_export_symbols_F77=no enable_shared_with_static_runtimes_F77=yes - export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -13653,13 +13504,60 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else - ld_shlibs=no + ld_shlibs_F77=no + fi + ;; + + interix3*) + hardcode_direct_F77=no + hardcode_shlibpath_var_F77=no + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + export_dynamic_flag_spec_F77='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + link_all_deplibs_F77=no + else + ld_shlibs_F77=no fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= @@ -13669,7 +13567,7 @@ fi ;; - solaris* | sysv5*) + solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs_F77=no cat <&2 @@ -13690,6 +13588,33 @@ fi ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs_F77=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + esac + ;; + sunos4*) archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= @@ -13697,31 +13622,6 @@ hardcode_shlibpath_var_F77=no ;; - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_cmds_F77="$tmp_archive_cmds" - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - if test $supports_anon_versioning = yes; then - archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ -cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ -$echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - else - archive_expsym_cmds_F77="$tmp_archive_cmds" - fi - else - ld_shlibs_F77=no - fi - ;; - *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' @@ -13732,16 +13632,11 @@ ;; esac - if test "$ld_shlibs_F77" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_F77='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_F77= - fi + if test "$ld_shlibs_F77" = no; then + runpath_var= + hardcode_libdir_flag_spec_F77= + export_dynamic_flag_spec_F77= + whole_archive_flag_spec_F77= fi else # PORTME fill in a description of your system's linker (not GNU ld) @@ -13753,7 +13648,7 @@ # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L_F77=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct_F77=unsupported @@ -13787,6 +13682,7 @@ break fi done + ;; esac exp_sym_flag='-bexport' @@ -13805,7 +13701,7 @@ link_all_deplibs_F77=yes if test "$GCC" = yes; then - case $host_os in aix4.012|aix4.012.*) + case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -13824,8 +13720,12 @@ hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_libdir_separator_F77= fi + ;; esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -13833,11 +13733,11 @@ # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then + if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' - fi + fi fi fi @@ -13863,8 +13763,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -13892,12 +13791,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_F77="-z nodefs" - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF @@ -13914,8 +13813,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -13947,13 +13845,11 @@ # -berok will link without error, but may produce a broken library. no_undefined_flag_F77=' ${wl}-bernotok' allow_undefined_flag_F77=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols_F77=yes # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_F77=' ' + whole_archive_flag_spec_F77='$convenience' archive_cmds_need_lc_F77=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -13966,7 +13862,7 @@ ld_shlibs_F77=no ;; - bsdi4*) + bsdi[45]*) export_dynamic_flag_spec_F77=-rdynamic ;; @@ -13987,57 +13883,57 @@ old_archive_From_new_cmds_F77='true' # FIXME: Should let the user specify the lib program. old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' + fix_srcfile_path_F77='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes_F77=yes ;; darwin* | rhapsody*) - if test "$GXX" = yes ; then - archive_cmds_need_lc_F77=no - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag_F77='-undefined suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_F77='-flat_namespace -undefined suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_F77='-flat_namespace -undefined suppress' - ;; - 10.*) - allow_undefined_flag_F77='-undefined dynamic_lookup' - ;; - esac - fi - ;; + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_cmds_F77='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - module_cmds_F77='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + archive_cmds_need_lc_F77=no hardcode_direct_F77=no hardcode_automatic_F77=yes hardcode_shlibpath_var_F77=unsupported - whole_archive_flag_spec_F77='-all_load $convenience' + whole_archive_flag_spec_F77='' link_all_deplibs_F77=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else - ld_shlibs_F77=no + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_F77=no + ;; + esac fi ;; @@ -14071,13 +13967,22 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu) + freebsd* | dragonfly*) archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_F77='-R$libdir' hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no ;; + # GNU/kFreeBSD uses gcc -shared to do shared libraries. + kfreebsd*-gnu) + archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + link_all_deplibs_F77=no + ;; + hpux9*) if test "$GCC" = yes; then archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' @@ -14094,47 +13999,62 @@ export_dynamic_flag_spec_F77='${wl}-E' ;; - hpux10* | hpux11*) + hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*|ia64*) + archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + + hardcode_direct_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; + ia64*) + archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; *) archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else - case "$host_cpu" in - hppa*64*|ia64*) - archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + case $host_cpu in + hppa*64*) + archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*) - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + + case $host_cpu in + hppa*64*|ia64*) hardcode_libdir_flag_spec_ld_F77='+b $libdir' - hardcode_libdir_separator_F77=: - hardcode_direct_F77=no - hardcode_shlibpath_var_F77=no - ;; - ia64*) - hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_direct_F77=no hardcode_shlibpath_var_F77=no - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes ;; *) - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: hardcode_direct_F77=yes export_dynamic_flag_spec_F77='${wl}-E' @@ -14158,7 +14078,7 @@ link_all_deplibs_F77=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -14182,6 +14102,7 @@ hardcode_shlibpath_var_F77=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' export_dynamic_flag_spec_F77='${wl}-E' else @@ -14227,7 +14148,7 @@ allow_undefined_flag_F77=' -expect_unresolved \*' archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec_F77='-rpath $libdir' @@ -14235,21 +14156,15 @@ hardcode_libdir_separator_F77=: ;; - sco3.2v5*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_F77=no - export_dynamic_flag_spec_F77='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - solaris*) no_undefined_flag_F77=' -z text' if test "$GCC" = yes; then + wlarc='${wl}' archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else + wlarc='' archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' @@ -14258,8 +14173,18 @@ hardcode_shlibpath_var_F77=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; + *) + whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; esac link_all_deplibs_F77=yes ;; @@ -14316,36 +14241,45 @@ fi ;; - sysv4.2uw2*) - archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes - hardcode_minus_L_F77=no + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) + no_undefined_flag_F77='${wl}-z,text' + archive_cmds_need_lc_F77=no hardcode_shlibpath_var_F77=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; + runpath_var='LD_RUN_PATH' - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - no_undefined_flag_F77='${wl}-z ${wl}text' if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_F77=no ;; - sysv5*) - no_undefined_flag_F77=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec_F77= + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag_F77='${wl}-z,text' + allow_undefined_flag_F77='${wl}-z,nodefs' + archive_cmds_need_lc_F77=no hardcode_shlibpath_var_F77=no + hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator_F77=':' + link_all_deplibs_F77=yes + export_dynamic_flag_spec_F77='${wl}-Bexport' runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi ;; uts4*) @@ -14364,11 +14298,6 @@ echo "${ECHO_T}$ld_shlibs_F77" >&6 test "$ld_shlibs_F77" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - # # Do we need to explicitly link libc? # @@ -14401,6 +14330,7 @@ libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_F77 + pic_flag=$lt_prog_compiler_pic_F77 compiler_flags=-v linker_flags=-v verstring= @@ -14533,7 +14463,7 @@ shlibpath_var=LIBRARY_PATH ;; -bsdi4*) +bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -14561,7 +14491,8 @@ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -14591,7 +14522,7 @@ ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; @@ -14614,7 +14545,7 @@ soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -14649,8 +14580,17 @@ dynamic_linker='GNU ld.so' ;; -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -14668,14 +14608,19 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - freebsd3.01* | freebsdelf3.01*) + freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; - *) # from 3.2 on + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; esac ;; @@ -14695,7 +14640,7 @@ version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes @@ -14735,6 +14680,18 @@ postinstall_cmds='chmod 555 $lib' ;; +interix3*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; @@ -14792,31 +14749,10 @@ # before this can be enabled. hardcode_into_libs=yes - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) - echo '#line 14799 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - esac - fi - rm -rf conftest* - ;; - esac - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -14828,6 +14764,18 @@ dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + knetbsd*-gnu) version_type=linux need_lib_prefix=no @@ -14877,8 +14825,13 @@ openbsd*) version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no - need_version=yes + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH @@ -14916,13 +14869,6 @@ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; - solaris*) version_type=linux need_lib_prefix=no @@ -14948,7 +14894,7 @@ need_version=yes ;; -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' @@ -14981,6 +14927,29 @@ fi ;; +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -14996,12 +14965,17 @@ echo "${ECHO_T}$dynamic_linker" >&6 test "$dynamic_linker" = no && can_build_shared=no +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 hardcode_action_F77= if test -n "$hardcode_libdir_flag_spec_F77" || \ - test -n "$runpath_var F77" || \ - test "X$hardcode_automatic_F77"="Xyes" ; then + test -n "$runpath_var_F77" || \ + test "X$hardcode_automatic_F77" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_F77" != no && @@ -15033,36 +15007,6 @@ enable_fast_install=needless fi -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - ;; - *) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - ;; - esac -fi - - # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh @@ -15077,7 +15021,7 @@ # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ @@ -15178,6 +15122,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -15189,6 +15139,9 @@ # A C compiler. LTCC=$lt_LTCC +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + # A language-specific compiler. CC=$lt_compiler_F77 @@ -15254,7 +15207,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -15492,26 +15445,55 @@ lt_simple_compile_test_code="class foo {}\n" # Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }\n' +lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + # Allow CC to be a program name with arguments. compiler=$CC +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${GCJ-"gcj"} compiler=$CC compiler_GCJ=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + # GCJ did not exist at the time GCC didn't implicitly link libc in. archive_cmds_need_lc_GCJ=no +old_archive_cmds_GCJ=$old_archive_cmds + lt_prog_compiler_no_builtin_flag_GCJ= @@ -15534,18 +15516,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15540: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15522: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15544: \$? = $ac_status" >&5 + echo "$as_me:15526: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi @@ -15606,6 +15590,11 @@ lt_prog_compiler_pic_GCJ='-fno-common' ;; + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. @@ -15622,7 +15611,7 @@ hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -15648,6 +15637,16 @@ lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' fi ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_GCJ='-qnocommon' + lt_prog_compiler_wl_GCJ='-Wl,' + ;; + esac + ;; mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being @@ -15659,7 +15658,7 @@ lt_prog_compiler_wl_GCJ='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -15683,12 +15682,19 @@ ;; linux*) - case $CC in + case $cc_basename in icc* | ecc*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-static' ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-fpic' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; ccc*) lt_prog_compiler_wl_GCJ='-Wl,' # All Alpha code is PIC. @@ -15703,15 +15709,15 @@ lt_prog_compiler_static_GCJ='-non_shared' ;; - sco3.2v5*) - lt_prog_compiler_pic_GCJ='-Kpic' - lt_prog_compiler_static_GCJ='-dn' - ;; - solaris*) - lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl_GCJ='-Qoption ld ';; + *) + lt_prog_compiler_wl_GCJ='-Wl,';; + esac ;; sunos4*) @@ -15720,7 +15726,7 @@ lt_prog_compiler_static_GCJ='-Bstatic' ;; - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' @@ -15733,6 +15739,17 @@ fi ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_can_build_shared_GCJ=no + ;; + uts4*) lt_prog_compiler_pic_GCJ='-pic' lt_prog_compiler_static_GCJ='-Bstatic' @@ -15767,18 +15784,20 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15773: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15790: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15777: \$? = $ac_status" >&5 + echo "$as_me:15794: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_prog_compiler_pic_works_GCJ=yes fi fi @@ -15799,7 +15818,7 @@ fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_GCJ= @@ -15809,6 +15828,48 @@ ;; esac +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" +echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 +if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_static_works_GCJ=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_static_works_GCJ=yes + fi + else + lt_prog_compiler_static_works_GCJ=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5 +echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6 + +if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then + : +else + lt_prog_compiler_static_GCJ= +fi + + echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then @@ -15827,23 +15888,25 @@ # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15833: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15894: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:15837: \$? = $ac_status" >&5 + echo "$as_me:15898: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - if test ! -s out/conftest.err; then + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_GCJ=yes fi fi - chmod u+w . + chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation @@ -15919,6 +15982,16 @@ # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) @@ -15929,6 +16002,10 @@ with_gnu_ld=no fi ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; openbsd*) with_gnu_ld=no ;; @@ -15939,6 +16016,27 @@ # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_GCJ= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) @@ -15989,10 +16087,10 @@ allow_undefined_flag_GCJ=unsupported always_export_symbols_GCJ=no enable_shared_with_static_runtimes_GCJ=yes - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then @@ -16001,13 +16099,60 @@ echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else - ld_shlibs=no + ld_shlibs_GCJ=no + fi + ;; + + interix3*) + hardcode_direct_GCJ=no + hardcode_shlibpath_var_GCJ=no + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + export_dynamic_flag_spec_GCJ='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + link_all_deplibs_GCJ=no + else + ld_shlibs_GCJ=no fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= @@ -16017,7 +16162,7 @@ fi ;; - solaris* | sysv5*) + solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs_GCJ=no cat <&2 @@ -16038,6 +16183,33 @@ fi ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs_GCJ=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + esac + ;; + sunos4*) archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= @@ -16045,31 +16217,6 @@ hardcode_shlibpath_var_GCJ=no ;; - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_cmds_GCJ="$tmp_archive_cmds" - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - if test $supports_anon_versioning = yes; then - archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ -cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ -$echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - else - archive_expsym_cmds_GCJ="$tmp_archive_cmds" - fi - else - ld_shlibs_GCJ=no - fi - ;; - *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' @@ -16080,16 +16227,11 @@ ;; esac - if test "$ld_shlibs_GCJ" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_GCJ= - fi + if test "$ld_shlibs_GCJ" = no; then + runpath_var= + hardcode_libdir_flag_spec_GCJ= + export_dynamic_flag_spec_GCJ= + whole_archive_flag_spec_GCJ= fi else # PORTME fill in a description of your system's linker (not GNU ld) @@ -16101,7 +16243,7 @@ # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L_GCJ=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct_GCJ=unsupported @@ -16135,6 +16277,7 @@ break fi done + ;; esac exp_sym_flag='-bexport' @@ -16153,7 +16296,7 @@ link_all_deplibs_GCJ=yes if test "$GCC" = yes; then - case $host_os in aix4.012|aix4.012.*) + case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` @@ -16172,8 +16315,12 @@ hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_libdir_separator_GCJ= fi + ;; esac shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi else # not using gcc if test "$host_cpu" = ia64; then @@ -16181,11 +16328,11 @@ # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then + if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' - fi + fi fi fi @@ -16221,8 +16368,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16250,12 +16396,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_GCJ="-z nodefs" - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF @@ -16282,8 +16428,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16315,13 +16460,11 @@ # -berok will link without error, but may produce a broken library. no_undefined_flag_GCJ=' ${wl}-bernotok' allow_undefined_flag_GCJ=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols_GCJ=yes # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_GCJ=' ' + whole_archive_flag_spec_GCJ='$convenience' archive_cmds_need_lc_GCJ=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; @@ -16334,7 +16477,7 @@ ld_shlibs_GCJ=no ;; - bsdi4*) + bsdi[45]*) export_dynamic_flag_spec_GCJ=-rdynamic ;; @@ -16355,57 +16498,57 @@ old_archive_From_new_cmds_GCJ='true' # FIXME: Should let the user specify the lib program. old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' + fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes_GCJ=yes ;; darwin* | rhapsody*) - if test "$GXX" = yes ; then - archive_cmds_need_lc_GCJ=no - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag_GCJ='-undefined suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' - ;; - 10.*) - allow_undefined_flag_GCJ='-undefined dynamic_lookup' - ;; - esac - fi - ;; + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_cmds_GCJ='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - module_cmds_GCJ='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + archive_cmds_need_lc_GCJ=no hardcode_direct_GCJ=no hardcode_automatic_GCJ=yes hardcode_shlibpath_var_GCJ=unsupported - whole_archive_flag_spec_GCJ='-all_load $convenience' + whole_archive_flag_spec_GCJ='' link_all_deplibs_GCJ=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else - ld_shlibs_GCJ=no + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_GCJ=no + ;; + esac fi ;; @@ -16439,11 +16582,20 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu) + freebsd* | dragonfly*) + archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + # GNU/kFreeBSD uses gcc -shared to do shared libraries. + kfreebsd*-gnu) archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_GCJ='-R$libdir' hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no + link_all_deplibs_GCJ=no ;; hpux9*) @@ -16462,47 +16614,62 @@ export_dynamic_flag_spec_GCJ='${wl}-E' ;; - hpux10* | hpux11*) + hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*|ia64*) + archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + + hardcode_direct_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; + ia64*) + archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; *) archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else - case "$host_cpu" in - hppa*64*|ia64*) - archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + case $host_cpu in + hppa*64*) + archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*) - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + + case $host_cpu in + hppa*64*|ia64*) hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' - hardcode_libdir_separator_GCJ=: - hardcode_direct_GCJ=no - hardcode_shlibpath_var_GCJ=no - ;; - ia64*) - hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_direct_GCJ=no hardcode_shlibpath_var_GCJ=no - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes ;; *) - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: hardcode_direct_GCJ=yes export_dynamic_flag_spec_GCJ='${wl}-E' @@ -16526,7 +16693,7 @@ link_all_deplibs_GCJ=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -16550,6 +16717,7 @@ hardcode_shlibpath_var_GCJ=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' export_dynamic_flag_spec_GCJ='${wl}-E' else @@ -16595,7 +16763,7 @@ allow_undefined_flag_GCJ=' -expect_unresolved \*' archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec_GCJ='-rpath $libdir' @@ -16603,21 +16771,15 @@ hardcode_libdir_separator_GCJ=: ;; - sco3.2v5*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - export_dynamic_flag_spec_GCJ='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - solaris*) no_undefined_flag_GCJ=' -z text' if test "$GCC" = yes; then + wlarc='${wl}' archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else + wlarc='' archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' @@ -16626,8 +16788,18 @@ hardcode_shlibpath_var_GCJ=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; + *) + whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; esac link_all_deplibs_GCJ=yes ;; @@ -16684,36 +16856,45 @@ fi ;; - sysv4.2uw2*) - archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=no + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) + no_undefined_flag_GCJ='${wl}-z,text' + archive_cmds_need_lc_GCJ=no hardcode_shlibpath_var_GCJ=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; + runpath_var='LD_RUN_PATH' - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - no_undefined_flag_GCJ='${wl}-z ${wl}text' if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_GCJ=no ;; - sysv5*) - no_undefined_flag_GCJ=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec_GCJ= + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag_GCJ='${wl}-z,text' + allow_undefined_flag_GCJ='${wl}-z,nodefs' + archive_cmds_need_lc_GCJ=no hardcode_shlibpath_var_GCJ=no + hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator_GCJ=':' + link_all_deplibs_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-Bexport' runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi ;; uts4*) @@ -16732,11 +16913,6 @@ echo "${ECHO_T}$ld_shlibs_GCJ" >&6 test "$ld_shlibs_GCJ" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - # # Do we need to explicitly link libc? # @@ -16769,6 +16945,7 @@ libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_GCJ + pic_flag=$lt_prog_compiler_pic_GCJ compiler_flags=-v linker_flags=-v verstring= @@ -16886,1354 +17063,563 @@ soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.01* | freebsdelf3.01*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case "$host_cpu" in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) - echo '#line 17167 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - esac - fi - rm -rf conftest* - ;; - esac - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -knetbsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=yes - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action_GCJ= -if test -n "$hardcode_libdir_flag_spec_GCJ" || \ - test -n "$runpath_var GCJ" || \ - test "X$hardcode_automatic_GCJ"="Xyes" ; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_GCJ" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && - test "$hardcode_minus_L_GCJ" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_GCJ=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_GCJ=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_GCJ=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 -echo "${ECHO_T}$hardcode_action_GCJ" >&6 - -if test "$hardcode_action_GCJ" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - ;; - *) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - ;; - esac -fi - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef shl_load - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shl_load; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef dlopen - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != dlopen; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + fi + ;; -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -int -main () -{ -dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no -fi + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; -fi + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; -fi +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; +freebsd1*) + dynamic_linker=no + ;; -fi +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; -fi +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' ;; esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; -#include +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi -#ifdef __cplusplus -extern "C" void exit (int); -#endif + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' fi -fi -rm -fr conftest* - + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; -#include +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; -#ifdef __cplusplus -extern "C" void exit (int); -#endif +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; esac - else : - # compilation failed - lt_cv_dlopen_self_static=no fi -fi -rm -fr conftest* + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; +*) + dynamic_linker=no + ;; +esac +echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6 +test "$dynamic_linker" = no && can_build_shared=no +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac +echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +hardcode_action_GCJ= +if test -n "$hardcode_libdir_flag_spec_GCJ" || \ + test -n "$runpath_var_GCJ" || \ + test "X$hardcode_automatic_GCJ" = "Xyes" ; then - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac + # We can hardcode non-existant directories. + if test "$hardcode_direct_GCJ" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && + test "$hardcode_minus_L_GCJ" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_GCJ=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_GCJ=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_GCJ=unsupported +fi +echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +echo "${ECHO_T}$hardcode_action_GCJ" >&6 - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac +if test "$hardcode_action_GCJ" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless fi @@ -18250,7 +17636,7 @@ # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ @@ -18351,6 +17737,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -18362,6 +17754,9 @@ # A C compiler. LTCC=$lt_LTCC +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + # A language-specific compiler. CC=$lt_compiler_GCJ @@ -18427,7 +17822,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -18671,15 +18066,42 @@ # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + # Allow CC to be a program name with arguments. compiler=$CC +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${RC-"windres"} compiler=$CC compiler_RC=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + lt_cv_prog_compiler_c_o_RC=yes # The else clause should only fire when bootstrapping the @@ -18695,7 +18117,7 @@ # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ @@ -18796,6 +18218,12 @@ # The host system. host_alias=$host_alias host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo @@ -18807,6 +18235,9 @@ # A C compiler. LTCC=$lt_LTCC +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + # A language-specific compiler. CC=$lt_compiler_RC @@ -18872,7 +18303,7 @@ # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC -# Must we lock files when doing compilation ? +# Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? @@ -19514,8 +18945,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19573,8 +19003,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19690,8 +19119,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19745,8 +19173,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19791,8 +19218,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19836,8 +19262,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20033,8 +19458,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20095,8 +19519,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20157,8 +19580,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20219,8 +19641,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20281,8 +19702,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20343,8 +19763,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20629,8 +20048,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -21855,7 +21273,7 @@ } >&5 cat >&5 <<_CSEOF -This file was extended by xf86-video-ati $as_me 6.5.7.3, which was +This file was extended by xf86-video-ati $as_me 6.5.8.0, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -21918,7 +21336,7 @@ cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -xf86-video-ati config.status 6.5.7.3 +xf86-video-ati config.status 6.5.8.0 configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" @@ -22391,11 +21809,6 @@ *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ @@ -22434,6 +21847,12 @@ fi;; esac done` || { (exit 1); exit 1; } + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub --- xserver-xorg-driver-ati-6.5.7.3.orig/CVS/Root +++ xserver-xorg-driver-ati-6.5.7.3/CVS/Root @@ -0,0 +1 @@ +:pserver:anoncvs@cvs.freedesktop.org:/cvs/xorg --- xserver-xorg-driver-ati-6.5.7.3.orig/CVS/Repository +++ xserver-xorg-driver-ati-6.5.7.3/CVS/Repository @@ -0,0 +1 @@ +driver/xf86-video-ati --- xserver-xorg-driver-ati-6.5.7.3.orig/CVS/Entries +++ xserver-xorg-driver-ati-6.5.7.3/CVS/Entries @@ -0,0 +1,12 @@ +/COPYING/1.1/Mon Dec 19 16:25:52 2005//Tati-1-0-branch +/Makefile.am/1.2/Mon Oct 3 21:22:07 2005//Tati-1-0-branch +/README.r128/1.1/Tue Oct 4 20:01:03 2005//Tati-1-0-branch +/README.r128.sgml/1.2/Fri Apr 23 19:23:59 2004//Tati-1-0-branch +D/man//// +D/src//// +/.cvsignore/1.1/Mon May 1 03:52:02 2006//Tati-1-0-branch +/ChangeLog/1.29.2.20/Mon May 1 04:33:08 2006//Tati-1-0-branch +/README.ati/1.1/Mon May 1 03:52:02 2006//Tati-1-0-branch +/README.ati.sgml/1.3/Mon May 1 03:52:02 2006//Tati-1-0-branch +/autogen.sh/1.2/Mon May 1 03:52:02 2006//Tati-1-0-branch +/configure.ac/1.19.2.1/Mon May 1 04:33:09 2006//Tati-1-0-branch --- xserver-xorg-driver-ati-6.5.7.3.orig/CVS/Tag +++ xserver-xorg-driver-ati-6.5.7.3/CVS/Tag @@ -0,0 +1 @@ +Tati-1-0-branch --- xserver-xorg-driver-ati-6.5.7.3.orig/.cvsignore +++ xserver-xorg-driver-ati-6.5.7.3/.cvsignore @@ -0,0 +1,19 @@ +Makefile +Makefile.in +*.la +*.lo +aclocal.m4 +autom4te.cache +config.guess +config.h +config.h.in +config.log +config.status +config.sub +configure +depcomp +install-sh +libtool +ltmain.sh +missing +stamp-h1 --- xserver-xorg-driver-ati-6.5.7.3.orig/debian/copyright +++ xserver-xorg-driver-ati-6.5.7.3/debian/copyright @@ -0,0 +1,119 @@ +Copyright 1997 through 2004 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that copyright +notice and this permission notice appear in supporting documentation, and +that the name of Marc Aurele La France not be used in advertising or +publicity pertaining to distribution of the software without specific, +written prior permission. Marc Aurele La France makes no representations +about the suitability of this software for any purpose. It is provided +"as-is" without express or implied warranty. + +MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO +EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR +CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, +DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER +TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +PERFORMANCE OF THIS SOFTWARE. + +Copyright 2000 Gareth Hughes +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, sublicense, +and/or sell copies of the Software, and to permit persons to whom the +Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice (including the next +paragraph) shall be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +GARETH HUGHES BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +(c) 2004 Adam Jackson. Standard MIT license applies. + +Copyright 1999-2000 Precision Insight, Inc., Cedar Park, Texas. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to +deal in the Software without restriction, including without limitation the +rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +sell copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice (including the next +paragraph) shall be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL +PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. + +Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, +Precision Insight, Inc., Cedar Park, Texas, and +VA Linux Systems Inc., Fremont, California. + +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining +a copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation on the rights to use, copy, modify, merge, +publish, distribute, sublicense, and/or sell copies of the Software, +and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial +portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX +SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +Copyright 2003 Alex Deucher. + +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining +a copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation on the rights to use, copy, modify, merge, +publish, distribute, sublicense, and/or sell copies of the Software, +and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial +portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +NON-INFRINGEMENT. IN NO EVENT SHALL ALEX DEUCHER, OR ANY OTHER +CONTRIBUTORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. + +Created by Bogdan D. bogdand@users.sourceforge.net +License: GPL --- xserver-xorg-driver-ati-6.5.7.3.orig/debian/rules +++ xserver-xorg-driver-ati-6.5.7.3/debian/rules @@ -0,0 +1,88 @@ +#!/usr/bin/make -f +# debian/rules for the Debian xserver-xorg-driver-ati package. +# Copyright © 2004 Scott James Remnant +# Copyright © 2005 Daniel Stone + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +CFLAGS = -Wall -g +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif +ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) + INSTALL_PROGRAM += -s +endif + +DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) +ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) + confflags += --build=$(DEB_HOST_GNU_TYPE) +else + confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE) +endif + +# kbd_drv.a isn't phenomenally useful; kbd_drv.so more so +confflags += --disable-static + +build: build-stamp +build-stamp: + dh_testdir + + mkdir obj-$(DEB_BUILD_GNU_TYPE) + cd obj-$(DEB_BUILD_GNU_TYPE) && \ + ../configure --prefix=/usr --mandir=\$${prefix}/share/man \ + --infodir=\$${prefix}/share/info $(confflags) \ + CFLAGS="$(CFLAGS)" + cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) + + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + + rm -f config.cache config.log config.status + rm -f */config.cache */config.log */config.status + rm -f conftest* */conftest* + rm -rf autom4te.cache */autom4te.cache + rm -rf obj-* + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + + dh_installdocs + dh_installchangelogs + dh_install --sourcedir=debian/tmp + dh_link + dh_strip + dh_compress + dh_fixperms + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +# Build architecture-independent files here. +binary-indep: build install +# Nothing to do + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- xserver-xorg-driver-ati-6.5.7.3.orig/debian/changelog +++ xserver-xorg-driver-ati-6.5.7.3/debian/changelog @@ -0,0 +1,84 @@ +xserver-xorg-driver-ati (1:6.5.7.3-0ubuntu7) dapper; urgency=low + + * Update from the ati-1.0-stable branch that makes this driver + exactly the same as 6.5.8 from upstream. + + -- Fabio M. Di Nitto Mon, 01 May 2006 06:39:47 +0200 + +xserver-xorg-driver-ati (1:6.5.7.3-0ubuntu6) dapper; urgency=low + + * Default BIOS hotkeys to enabled [Malone #36769] + + -- Matthew Garrett Sun, 30 Apr 2006 22:38:10 +0100 + +xserver-xorg-driver-ati (1:6.5.7.3-0ubuntu5) dapper; urgency=low + + * Import latest bug fixes: + - freedesktop bugzilla 6672: fix interrupts on radeon since memmap changes + - Add support for backing up the PCIE GART table on VT switch. + This makes suspend/resume work a lot better on PCIE cards. + (Thank to Dave Airlie for the patches and to promptly notify us) + + -- Fabio M. Di Nitto Fri, 21 Apr 2006 07:51:50 +0200 + +xserver-xorg-driver-ati (1:6.5.7.3-0ubuntu4) dapper; urgency=low + + * Import latest bug fix from CVS. + (Closes Ubuntu: #36335) + + -- Fabio M. Di Nitto Mon, 27 Mar 2006 08:09:04 +0200 + +xserver-xorg-driver-ati (1:6.5.7.3-0ubuntu3) dapper; urgency=low + + * Import all bug fixes from ati-1-0-branch. + NOTE: the branch is bug fixes *only*. + This upload should fix a few gazillion bugs in LP. + + -- Fabio M. Di Nitto Thu, 23 Mar 2006 10:39:43 +0100 + +xserver-xorg-driver-ati (1:6.5.7.3-0ubuntu2) dapper; urgency=low + + * Provide xserver-xorg-driver (closes: Malone #29004). + + -- Colin Watson Wed, 15 Mar 2006 12:26:30 +0000 + +xserver-xorg-driver-ati (1:6.5.7.3-0ubuntu1) dapper; urgency=low + + * New upstream release. + * Also install Rage Theatre multimedia modules. + + -- Daniel Stone Wed, 4 Jan 2006 17:21:27 +1100 + +xserver-xorg-driver-ati (1:6.5.7-0ubuntu3) dapper; urgency=low + + * Add missing Build-Depends (x11proto-fonts-dev, x11proto-randr-dev, + x11proto-render-dev, libdrm (>> 1.0.5), x11proto-xf86dri-dev). + + -- Daniel Stone Mon, 5 Dec 2005 14:52:47 +1100 + +xserver-xorg-driver-ati (1:6.5.7-0ubuntu2) dapper; urgency=low + + * Apply patch from https://bugs.freedesktop.org/attachment.cgi?id=3620 to + fix hard crash on powerpc. The patch is also stored in + debian/ppc-fix.patch. + NOTE: according to benh the patch still needs some extra polishing. + + -- Fabio M. Di Nitto Fri, 25 Nov 2005 11:34:33 +0100 + +xserver-xorg-driver-ati (1:6.5.7-0ubuntu1) dapper; urgency=low + + * New upstream release. + + -- Daniel Stone Tue, 22 Nov 2005 13:25:16 +1100 + +xserver-xorg-driver-ati (1:6.5.6.1-1) dapper; urgency=low + + * New upstream release. + + -- Daniel Stone Tue, 25 Oct 2005 18:01:13 +1000 + +xserver-xorg-driver-ati (1:6.5.6-1) breezy; urgency=low + + * First xserver-xorg-driver-ati release. + + -- Daniel Stone Wed, 6 Jul 2005 15:48:17 +1000 --- xserver-xorg-driver-ati-6.5.7.3.orig/debian/xserver-xorg-driver-ati.install +++ xserver-xorg-driver-ati-6.5.7.3/debian/xserver-xorg-driver-ati.install @@ -0,0 +1,3 @@ +usr/lib/xorg/modules/drivers/*.so +usr/lib/xorg/modules/multimedia/*.so +usr/share/man/man4/* --- xserver-xorg-driver-ati-6.5.7.3.orig/debian/control +++ xserver-xorg-driver-ati-6.5.7.3/debian/control @@ -0,0 +1,31 @@ +Source: xserver-xorg-driver-ati +Section: x11 +Priority: optional +Maintainer: Daniel Stone +Build-Depends: debhelper (>= 4.0.0), pkg-config, xserver-xorg-dev, x11proto-gl-dev, x11proto-xext-dev, x11proto-core-dev, x11proto-video-dev, x11proto-xinerama-dev, x11proto-xf86misc-dev, libgl1-mesa-dev | libgl-dev, x11proto-fonts-dev, x11proto-randr-dev, x11proto-render-dev, libdrm-dev (>> 1.0.5), x11proto-xf86dri-dev +Standards-Version: 3.6.1.0 + +Package: xserver-xorg-driver-ati +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends}, xserver-xorg-core (>= 1:0.99.0-1) +Replaces: xserver-xorg (<< 6.8.2-35), xserver-xorg-driver-atimisc, xserver-xorg-driver-r128, xserver-xorg-driver-radeon +Conflicts: xserver-xorg-driver-atimisc, xserver-xorg-driver-r128, xserver-xorg-driver-radeon +Provides: xserver-xorg-driver, xserver-xorg-driver-atimisc, xserver-xorg-driver-r128, xserver-xorg-driver-radeon +Description: X.Org X server -- ATI display driver + This driver for the X.Org X server (see xserver-xorg for a further description) + provides support for the ATI Mach, Rage, Radeon, and FireGL series. It + provides the 'atimisc', 'r128' and 'radeon' sub-drivers. + . + Note that this is not the same as the ATI-provided, binary-only, 'fglrx' + driver, which provides additional 3D functionality for some newer Radeon + cards, but is not supported. + . + This driver provides support for Mach, Rage, Rage128, Radeon, and most + FireGL series ATI cards. + . + More information about X.Org can be found at: + + + . + This module can be found as the module 'driver/xf86-video-ati' at + :pserver:anoncvs@cvs.freedesktop.org:/cvs/xorg --- xserver-xorg-driver-ati-6.5.7.3.orig/debian/compat +++ xserver-xorg-driver-ati-6.5.7.3/debian/compat @@ -0,0 +1 @@ +4 --- xserver-xorg-driver-ati-6.5.7.3.orig/autogen.sh +++ xserver-xorg-driver-ati-6.5.7.3/autogen.sh @@ -0,0 +1,12 @@ +#! /bin/sh + +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd $srcdir + +autoreconf -v --install || exit 1 +cd $ORIGDIR || exit $? + +$srcdir/configure --enable-maintainer-mode "$@"