--- xserver-xorg-input-spaceorb-1.1.1.orig/autogen.sh
+++ xserver-xorg-input-spaceorb-1.1.1/autogen.sh
@@ -0,0 +1,12 @@
+#! /bin/sh
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+ORIGDIR=`pwd`
+cd $srcdir
+
+autoreconf -v --install || exit 1
+cd $ORIGDIR || exit $?
+
+$srcdir/configure --enable-maintainer-mode "$@"
--- xserver-xorg-input-spaceorb-1.1.1.orig/install-sh
+++ xserver-xorg-input-spaceorb-1.1.1/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2006-10-14.15
+scriptversion=2005-05-14.22
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,24 +39,15 @@
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" "" $nl"
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
+# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
@@ -67,13 +58,7 @@
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
+chmodcmd="$chmodprog 0755"
chowncmd=
chgrpcmd=
stripcmd=
@@ -110,7 +95,7 @@
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
-while test $# -ne 0; do
+while test -n "$1"; do
case $1 in
-c) shift
continue;;
@@ -126,15 +111,9 @@
--help) echo "$usage"; exit $?;;
- -m) mode=$2
+ -m) chmodcmd="$chmodprog $2"
shift
shift
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
continue;;
-o) chowncmd="$chownprog $2"
@@ -157,33 +136,25 @@
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
+ *) # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ test -n "$dir_arg$dstarg" && break
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
break;;
-
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
-
- *) break;;
esac
done
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
-fi
-
-if test $# -eq 0; then
+if test -z "$1"; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
@@ -193,33 +164,6 @@
exit 0
fi
-if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
-
for src
do
# Protect names starting with `-'.
@@ -229,11 +173,15 @@
if test -n "$dir_arg"; then
dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
+ src=
+ if test -d "$dst"; then
+ mkdircmd=:
+ chmodcmd=
+ else
+ mkdircmd=$mkdirprog
+ fi
+ else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
@@ -260,188 +208,53 @@
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
+ dst=$dst/`basename "$src"`
fi
fi
- obsolete_mkdir_used=false
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
+ # Make sure that the destination directory exists.
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
+ '
+ IFS="${IFS-$defaultIFS}"
+
+ oIFS=$IFS
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ shift
+ IFS=$oIFS
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix=/ ;;
- -*) prefix=./ ;;
- *) prefix= ;;
- esac
-
- case $posix_glob in
- '')
- if (set -f) 2>/dev/null; then
- posix_glob=true
- else
- posix_glob=false
- fi ;;
- esac
-
- oIFS=$IFS
- IFS=/
- $posix_glob && set -f
- set fnord $dstdir
- shift
- $posix_glob && set +f
- IFS=$oIFS
+ pathcomp=
- prefixes=
-
- for d
- do
- test -z "$d" && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
+ shift
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp"
+ # mkdir can fail with a `File exist' error in case several
+ # install-sh are creating the directory concurrently. This
+ # is OK.
+ test -d "$pathcomp" || exit
fi
- fi
+ pathcomp=$pathcomp/
+ done
fi
if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ $doit $mkdircmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
else
+ dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
@@ -449,9 +262,10 @@
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+ trap '(exit $?); exit' 1 2 13 15
# Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+ $doit $cpprog "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits.
#
@@ -462,10 +276,10 @@
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
# Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
@@ -477,12 +291,11 @@
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
- if test -f "$dst"; then
- $doit $rmcmd -f "$dst" 2>/dev/null \
- || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
- && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
|| {
- echo "$0: cannot unlink or rename $dst" >&2
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit 1
}
else
@@ -491,14 +304,17 @@
} &&
# Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
}
- } || exit 1
-
- trap '' 0
- fi
+ }
+ fi || { (exit 1); exit 1; }
done
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+ (exit 0); exit 0
+}
+
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
--- xserver-xorg-input-spaceorb-1.1.1.orig/depcomp
+++ xserver-xorg-input-spaceorb-1.1.1/depcomp
@@ -1,10 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2006-10-15.18
+scriptversion=2005-07-09.11
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
-# Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -92,20 +91,7 @@
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
@@ -290,46 +276,6 @@
rm -f "$tmpdepfile"
;;
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add `dependent.h:' lines.
- sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -342,13 +288,13 @@
if test "$libtool" = yes; then
# With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
+ # static library. This mecanism is used in libtool 1.4 series to
# handle both shared and static libraries in a single compilation.
# With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
#
# With libtool 1.5 this exception was removed, and libtool now
# generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
+ # compilations output dependencies in in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
--- xserver-xorg-input-spaceorb-1.1.1.orig/Makefile.in
+++ xserver-xorg-input-spaceorb-1.1.1/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -33,11 +33,15 @@
# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -51,31 +55,28 @@
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-subdir = .
DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure COPYING ChangeLog config.guess \
- config.sub depcomp install-sh ltmain.sh missing
+ config.sub depcomp install-sh ltmain.sh missing mkinstalldirs
+subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
@@ -93,6 +94,8 @@
ACLOCAL = @ACLOCAL@
ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
APP_MAN_DIR = @APP_MAN_DIR@
APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
@@ -127,7 +130,6 @@
FILE_MAN_DIR = @FILE_MAN_DIR@
FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
GREP = @GREP@
-INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -141,10 +143,11 @@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MISC_MAN_DIR = @MISC_MAN_DIR@
MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
-MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -155,20 +158,19 @@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
-SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
XORG_CFLAGS = @XORG_CFLAGS@
XORG_LIBS = @XORG_LIBS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -180,7 +182,6 @@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
-builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -209,11 +210,8 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = foreign
SUBDIRS = src man
CLEANFILES = ChangeLog
@@ -259,7 +257,7 @@
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
- $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+ $(MAKE) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@@ -281,6 +279,7 @@
distclean-libtool:
-rm -f libtool
+uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
@@ -313,7 +312,8 @@
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-$(RECURSIVE_CLEAN_TARGETS):
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
@@ -415,22 +415,23 @@
distdir: $(DISTFILES)
$(am__remove_distdir)
- test -d $(distdir) || mkdir $(distdir)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
+ mkdir $(distdir)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -444,7 +445,7 @@
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
@@ -452,8 +453,6 @@
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
@@ -461,7 +460,7 @@
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
@@ -536,7 +535,7 @@
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@@ -607,20 +606,12 @@
install-data-am:
-install-dvi: install-dvi-recursive
-
install-exec-am:
-install-html: install-html-recursive
-
install-info: install-info-recursive
install-man:
-install-pdf: install-pdf-recursive
-
-install-ps: install-ps-recursive
-
installcheck-am:
maintainer-clean: maintainer-clean-recursive
@@ -641,26 +632,24 @@
ps-am:
-uninstall-am:
+uninstall-am: uninstall-info-am
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
+uninstall-info: uninstall-info-recursive
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
- dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
+ check-am clean clean-generic clean-libtool clean-recursive \
+ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+ dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
- distclean-tags distcleancheck distdir distuninstallcheck dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am
+ distclean-recursive distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-exec \
+ install-exec-am install-info install-info-am install-man \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ maintainer-clean-recursive mostlyclean mostlyclean-generic \
+ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
+ tags tags-recursive uninstall uninstall-am uninstall-info-am
.PHONY: ChangeLog
--- xserver-xorg-input-spaceorb-1.1.1.orig/aclocal.m4
+++ xserver-xorg-input-spaceorb-1.1.1/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
+# 2005 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,14 +11,9 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-m4_if(m4_PACKAGE_VERSION, [2.61],,
-[m4_fatal([this file was generated for autoconf 2.61.
-You have another version of autoconf. If you want to use that,
-you should regenerate the build system entirely.], [63])])
-
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-# serial 51 AC_PROG_LIBTOOL
+# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -181,7 +176,7 @@
test -z "$ac_objext" && ac_objext=o
# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
@@ -268,9 +263,8 @@
# Check for compiler boilerplate output or warnings with
# the simple compiler test code.
AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+[ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$rm conftest*
@@ -282,9 +276,8 @@
# Check for linker boilerplate output or warnings with
# the simple link test code.
AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
+[ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$rm conftest*
@@ -300,20 +293,12 @@
# If we don't find anything, use the default library path according
# to the aix ld manual.
AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi],[])
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
])# _LT_AC_SYS_LIBPATH_AIX
@@ -544,17 +529,13 @@
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
*32-bit*)
case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
x86_64-*linux*)
LD="${LD-ld} -m elf_i386"
;;
@@ -571,9 +552,6 @@
;;
*64-bit*)
case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
@@ -645,7 +623,7 @@
AC_CACHE_CHECK([$1], [$2],
[$2=no
ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$3"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -686,12 +664,11 @@
# ------------------------------------------------------------
# Check whether the given compiler option works
AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
+[AC_CACHE_CHECK([$1], [$2],
[$2=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $3"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
@@ -805,27 +782,24 @@
fi
;;
*)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
+ new_result=`expr "X$teststring" : ".*" 2>&1` &&
+ lt_cv_sys_max_cmd_len=$new_result &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on massive
+ # amounts of additional arguments before passing them to the linker.
+ # It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
;;
esac
])
@@ -1052,8 +1026,7 @@
# ---------------------------------
# Check to see if options -c and -o are simultaneously supported by compiler
AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
[_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
[_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
@@ -1061,7 +1034,7 @@
mkdir conftest
cd conftest
mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -1201,7 +1174,6 @@
darwin*)
if test -n "$STRIP" ; then
striplib="$STRIP -x"
- old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
@@ -1219,8 +1191,7 @@
# -----------------------------
# PORTME Fill in your ld.so characteristics
AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
+[AC_MSG_CHECKING([dynamic linker characteristics])
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -1234,58 +1205,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
-m4_if($1,[],[
if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
- sys_lib_search_path_spec=`echo $lt_search_path_spec`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
+fi
need_lib_prefix=unknown
hardcode_into_libs=no
@@ -1442,8 +1375,12 @@
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+ if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+ else
+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+ fi
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -1497,7 +1434,7 @@
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- *) # from 4.6 on, and DragonFly
+ freebsd*) # from 4.6 on
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -1560,7 +1497,7 @@
postinstall_cmds='chmod 555 $lib'
;;
-interix[[3-9]]*)
+interix3*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -1631,7 +1568,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -1644,6 +1581,18 @@
dynamic_linker='GNU/Linux ld.so'
;;
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
netbsd*)
version_type=sunos
need_lib_prefix=no
@@ -1725,10 +1674,6 @@
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
-rdos*)
- dynamic_linker=no
- ;;
-
solaris*)
version_type=linux
need_lib_prefix=no
@@ -1834,8 +1779,7 @@
# _LT_AC_TAGCONFIG
# ----------------
AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_ARG_WITH([tags],
+[AC_ARG_WITH([tags],
[AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
[include additional configurations @<:@automatic@:>@])],
[tagnames="$withval"])
@@ -2096,7 +2040,7 @@
# AC_PATH_TOOL_PREFIX
# -------------------
-# find a file program which can recognize shared library
+# find a file program which can recognise shared library
AC_DEFUN([AC_PATH_TOOL_PREFIX],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_MSG_CHECKING([for $1])
@@ -2159,7 +2103,7 @@
# AC_PATH_MAGIC
# -------------
-# find a file program which can recognize a shared library
+# find a file program which can recognise a shared library
AC_DEFUN([AC_PATH_MAGIC],
[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
@@ -2306,7 +2250,7 @@
# how to check for library dependencies
# -- PORTME fill in with the dynamic library characteristics
AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognize dependent libraries],
+[AC_CACHE_CHECK([how to recognise dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
@@ -2345,15 +2289,9 @@
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
+ # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
darwin* | rhapsody*)
@@ -2398,7 +2336,7 @@
esac
;;
-interix[[3-9]]*)
+interix3*)
# PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
;;
@@ -2418,7 +2356,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-netbsd*)
+netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
@@ -2448,10 +2386,6 @@
lt_cv_deplibs_check_method=pass_all
;;
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
solaris*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -2504,7 +2438,7 @@
lt_cv_path_NM="$NM"
else
lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
@@ -2720,10 +2654,10 @@
_LT_AC_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+lt_simple_compile_test_code="int some_variable = 0;\n"
# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
+lt_simple_link_test_code='int main(){return(0);}\n'
_LT_AC_SYS_COMPILER
@@ -2825,10 +2759,10 @@
_LT_AC_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+lt_simple_compile_test_code="int some_variable = 0;\n"
# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
@@ -2974,7 +2908,7 @@
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
- :
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
else
# We have old collect2
_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
@@ -3133,10 +3067,10 @@
case $cc_basename in
xlc*)
output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
*)
@@ -3219,7 +3153,9 @@
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
- hppa*64*|ia64*) ;;
+ hppa*64*|ia64*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ ;;
*)
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
;;
@@ -3287,7 +3223,7 @@
;;
esac
;;
- interix[[3-9]]*)
+ interix3*)
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
@@ -3407,29 +3343,6 @@
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
- # Not sure whether something based on
- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
- # would be better.
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- esac
- ;;
esac
;;
lynxos*)
@@ -3452,7 +3365,7 @@
;;
esac
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
@@ -3468,20 +3381,16 @@
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
fi
+ output_verbose_link_cmd='echo'
;;
osf3*)
case $cc_basename in
@@ -3643,10 +3552,15 @@
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
+ # The C++ compiler is used as linker so we must use $wl
+ # flag to pass the commands to the underlying system
+ # linker. We must also pass each convience library through
+ # to the system linker between allextract/defaultextract.
+ # The C++ compiler will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
;;
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
@@ -3693,12 +3607,6 @@
fi
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
fi
;;
esac
@@ -3942,7 +3850,7 @@
# PORTME: override above test on systems where it is broken
ifelse([$1],[CXX],
[case $host_os in
-interix[[3-9]]*)
+interix3*)
# Interix 3.5 installs completely hosed .la files for C++, so rather than
# hack all around it, let's just trust "g++" to DTRT.
_LT_AC_TAGVAR(predep_objects,$1)=
@@ -3950,46 +3858,13 @@
_LT_AC_TAGVAR(postdeps,$1)=
;;
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- #
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
- if test "$solaris_use_stlport4" != yes; then
- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
solaris*)
case $cc_basename in
CC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
# Adding this requires a known-good setup of shared libraries for
# Sun compiler versions before 5.6, else PIC objects from an old
# archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
+ _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
;;
esac
;;
@@ -4038,17 +3913,10 @@
_LT_AC_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
+lt_simple_compile_test_code=" subroutine t\n return\n end\n"
# Code to be used in simple link tests
-lt_simple_link_test_code="\
- program t
- end
-"
+lt_simple_link_test_code=" program t\n end\n"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
@@ -4127,10 +3995,10 @@
_LT_AC_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
+lt_simple_compile_test_code="class foo {}\n"
# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
@@ -4183,7 +4051,7 @@
_LT_AC_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
# Code to be used in simple link tests
lt_simple_link_test_code="$lt_simple_compile_test_code"
@@ -4272,7 +4140,6 @@
_LT_AC_TAGVAR(module_cmds, $1) \
_LT_AC_TAGVAR(module_expsym_cmds, $1) \
_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
- _LT_AC_TAGVAR(fix_srcfile_path, $1) \
_LT_AC_TAGVAR(exclude_expsyms, $1) \
_LT_AC_TAGVAR(include_expsyms, $1); do
@@ -4319,7 +4186,7 @@
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
#
# This file is part of GNU Libtool:
@@ -4644,7 +4511,7 @@
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
+fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
# Set to yes if exported symbols are required.
always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
@@ -4727,7 +4594,6 @@
# ---------------------------------
AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([LT_AC_PROG_SED])
AC_REQUIRE([AC_PROG_NM])
AC_REQUIRE([AC_OBJEXT])
# Check for command to grab the raw symbol name followed by C symbol from nm.
@@ -4954,14 +4820,12 @@
# like `-m68040'.
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | cygwin* | os2* | pw32*)
+ mingw* | os2* | pw32*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
;;
darwin* | rhapsody*)
@@ -4973,7 +4837,7 @@
# DJGPP does not support shared libraries at all
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
;;
- interix[[3-9]]*)
+ interix3*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
@@ -5109,14 +4973,6 @@
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- esac
;;
esac
;;
@@ -5133,7 +4989,7 @@
;;
esac
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
;;
osf3* | osf4* | osf5*)
case $cc_basename in
@@ -5237,15 +5093,13 @@
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
;;
@@ -5255,7 +5109,7 @@
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
- interix[[3-9]]*)
+ interix3*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
@@ -5313,7 +5167,7 @@
esac
;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
@@ -5365,22 +5219,6 @@
# All Alpha code is PIC.
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
- ;;
- esac
- ;;
esac
;;
@@ -5390,10 +5228,6 @@
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- rdos*)
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
solaris*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -5488,8 +5322,7 @@
# ------------------------------------
# See if the linker supports building shared libraries.
AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
ifelse([$1],[CXX],[
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
case $host_os in
@@ -5506,7 +5339,10 @@
_LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
;;
cygwin* | mingw*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ linux* | k*bsd*-gnu)
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
;;
*)
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
@@ -5645,7 +5481,7 @@
_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_AC_TAGVAR(always_export_symbols, $1)=no
_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -5663,7 +5499,7 @@
fi
;;
- interix[[3-9]]*)
+ interix3*)
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
@@ -5678,7 +5514,7 @@
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- gnu* | linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
tmp_addflag=
case $cc_basename,$host_cpu in
@@ -5696,29 +5532,21 @@
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
if test $supports_anon_versioning = yes; then
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
else
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
@@ -5751,7 +5579,7 @@
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
_LT_AC_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
@@ -5870,7 +5698,7 @@
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
- :
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
else
# We have old collect2
_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
@@ -5963,7 +5791,7 @@
# The linker will automatically build a .lib file if we build a DLL.
_LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
# FIXME: Should let the user specify the lib program.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
_LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
@@ -6005,10 +5833,10 @@
case $cc_basename in
xlc*)
output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
*)
@@ -6150,7 +5978,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
@@ -6170,28 +5998,24 @@
;;
openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
- fi
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
fi
;;
@@ -6250,16 +6074,17 @@
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
+ # The compiler driver will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl, iff we do not link with $LD.
+ # Luckily, gcc supports the same syntax we need for Sun Studio.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- fi
- ;;
+ case $wlarc in
+ '')
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
+ *)
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ esac ;;
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
;;
@@ -6316,7 +6141,7 @@
fi
;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
_LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -6391,7 +6216,7 @@
# to ld, don't add -lc before -lgcc.
AC_MSG_CHECKING([whether -lc should be explicitly linked in])
$rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
soname=conftest
@@ -6494,30 +6319,6 @@
[AC_CHECK_TOOL(RC, windres, no)
])
-
-# Cheap backport of AS_EXECUTABLE_P and required macros
-# from Autoconf 2.59; we should not use $as_executable_p directly.
-
-# _AS_TEST_PREPARE
-# ----------------
-m4_ifndef([_AS_TEST_PREPARE],
-[m4_defun([_AS_TEST_PREPARE],
-[if test -x / >/dev/null 2>&1; then
- as_executable_p='test -x'
-else
- as_executable_p='test -f'
-fi
-])])# _AS_TEST_PREPARE
-
-# AS_EXECUTABLE_P
-# ---------------
-# Check whether a file is executable.
-m4_ifndef([AS_EXECUTABLE_P],
-[m4_defun([AS_EXECUTABLE_P],
-[AS_REQUIRE([_AS_TEST_PREPARE])dnl
-$as_executable_p $1[]dnl
-])])# AS_EXECUTABLE_P
-
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_SED. When it is available in #
# a released version of Autoconf we should remove this #
@@ -6538,13 +6339,12 @@
test -z "$as_dir" && as_dir=.
for lt_ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
fi
done
done
done
-IFS=$as_save_IFS
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
@@ -6577,7 +6377,6 @@
done
])
SED=$lt_cv_path_SED
-AC_SUBST([SED])
AC_MSG_RESULT([$SED])
])
@@ -6729,7 +6528,7 @@
_PKG_TEXT
-To get pkg-config, see .])],
+To get pkg-config, see .])],
[$4])
else
$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
@@ -7161,35 +6960,6 @@
]) # XORG_LINT_LIBRARY
-# XORG_GCC_VISIBILITY()
-# --------------------------
-# Minimum version: 1.1.6
-#
-# Adds -fvisibility=hidden to CFLAGS if running with gcc 4 or greater.
-#
-
-AC_DEFUN([XORG_VISIBILITY],[
-
-AC_MSG_CHECKING([whether the compiler supports the visibility arg])
-
-dnl Check for gcc4 or greater
-AC_TRY_COMPILE([
-void
-#if defined(__GNUC__) && (__GNUC__ >= 4)
-foo () {};
-#endif
-], [], [
- has_visibility=yes
- CFLAGS="$CFLAGS -fvisibility=hidden"
-], [
- has_visibility=no
-]
-)
-
-AC_MSG_RESULT($has_visibility)
-
-]) # XORG_GCC_VISIBILITY
-
dnl Copyright 2005 Red Hat, Inc
dnl
dnl Permission to use, copy, modify, distribute, and sell this software and its
@@ -7301,7 +7071,7 @@
[Patch version of this package])
])
-# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -7311,29 +7081,14 @@
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.10], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+ [AM_AUTOMAKE_VERSION([1.9.6])])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
@@ -7390,14 +7145,14 @@
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 8
+# serial 7
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
@@ -7406,10 +7161,8 @@
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
if $2; then
$1_TRUE=
$1_FALSE='#'
@@ -7423,14 +7176,15 @@
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 9
+# serial 8
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
@@ -7458,7 +7212,6 @@
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
@@ -7524,7 +7277,6 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -7577,8 +7329,7 @@
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([AMDEPBACKSLASH])
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
@@ -7603,9 +7354,8 @@
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
@@ -7664,8 +7414,8 @@
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -7688,20 +7438,16 @@
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
+[AC_PREREQ([2.58])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
# test whether we have cygpath
@@ -7721,9 +7467,6 @@
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
@@ -7759,10 +7502,6 @@
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
])
])
@@ -7798,7 +7537,7 @@
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
@@ -7905,14 +7644,14 @@
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
+# serial 4
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
@@ -7928,7 +7667,6 @@
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
@@ -7939,7 +7677,7 @@
fi
])
-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -7947,23 +7685,60 @@
# AM_PROG_MKDIR_P
# ---------------
-# Check for `mkdir -p'.
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake. There are at least two reasons why we must not
+# use `-m 0755':
+# - it causes special bits like SGID to be ignored,
+# - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out. Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+AC_SUBST([mkdir_p])])
# Helper functions for option handling. -*- Autoconf -*-
@@ -8075,21 +7850,9 @@
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
--- xserver-xorg-input-spaceorb-1.1.1.orig/missing
+++ xserver-xorg-input-spaceorb-1.1.1/missing
@@ -1,9 +1,9 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2006-05-10.23
+scriptversion=2005-06-08.21
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard , 1996.
@@ -33,8 +33,6 @@
fi
run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
@@ -46,7 +44,7 @@
msg="missing on your system"
-case $1 in
+case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
@@ -79,7 +77,6 @@
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
@@ -109,7 +106,7 @@
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
-case $1 in
+case "$1" in
lex|yacc)
# Not GNU programs, they don't have --version.
;;
@@ -138,7 +135,7 @@
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case $1 in
+case "$1" in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
@@ -167,7 +164,7 @@
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case $f in
+ case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
@@ -195,8 +192,8 @@
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
@@ -217,25 +214,25 @@
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
+ if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
- case $LASTARG in
+ case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if test ! -f y.tab.h; then
+ if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
- if test ! -f y.tab.c; then
+ if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
@@ -247,18 +244,18 @@
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if test $# -ne 1; then
+ if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
- case $LASTARG in
+ case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if test ! -f lex.yy.c; then
+ if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
@@ -270,9 +267,11 @@
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
@@ -290,17 +289,11 @@
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
@@ -324,13 +317,13 @@
fi
firstarg="$1"
if shift; then
- case $firstarg in
+ case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case $firstarg in
+ case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
--- xserver-xorg-input-spaceorb-1.1.1.orig/ltmain.sh
+++ xserver-xorg-input-spaceorb-1.1.1/ltmain.sh
@@ -1,8 +1,8 @@
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit , 1996
#
# This program is free software; you can redistribute it and/or modify
@@ -43,22 +43,14 @@
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.5.24
-TIMESTAMP=" (1.1220.2.455 2007/06/24 02:13:29)"
+VERSION="1.5.22 Debian 1.5.22-4"
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
@@ -113,14 +105,12 @@
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
# We save the old values to restore during execute mode.
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- fi"
-done
+if test "${LC_ALL+set}" = set; then
+ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+ save_LANG="$LANG"; LANG=C; export LANG
+fi
# Make sure IFS has a sensible default
lt_nl='
@@ -146,8 +136,6 @@
preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
#####################################
# Shell function definitions:
@@ -208,13 +196,7 @@
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{
- / I /{
- s,.*,import,
- p
- q
- }
- }'`
+ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
@@ -345,17 +327,7 @@
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xlib_u=$my_xlib
- while :; do
- case " $extracted_archives " in
- *" $my_xlib_u "*)
- extracted_serial=`expr $extracted_serial + 1`
- my_xlib_u=lt$extracted_serial-$my_xlib ;;
- *) break ;;
- esac
- done
- extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib"
$show "${rm}r $my_xdir"
$run ${rm}r "$my_xdir"
@@ -482,12 +454,11 @@
;;
--version)
- echo "\
-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
-
-Copyright (C) 2007 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+ $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+ $echo
+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
+ $echo "This is free software; see the source for copying conditions. There is NO"
+ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
exit $?
;;
@@ -784,10 +755,9 @@
*.class) xform=class ;;
*.cpp) xform=cpp ;;
*.cxx) xform=cxx ;;
- *.[fF][09]?) xform=[fF][09]. ;;
+ *.f90) xform=f90 ;;
*.for) xform=for ;;
*.java) xform=java ;;
- *.obj) xform=obj ;;
esac
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -1168,9 +1138,8 @@
for arg
do
case $arg in
- -all-static | -static | -static-libtool-libs)
- case $arg in
- -all-static)
+ -all-static | -static)
+ if test "X$arg" = "X-all-static"; then
if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
$echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
fi
@@ -1178,20 +1147,12 @@
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
- ;;
- -static)
+ else
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=built
- ;;
- -static-libtool-libs)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- esac
+ fi
build_libtool_libs=no
build_old_libs=yes
break
@@ -1639,7 +1600,7 @@
continue
;;
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
compiler_flags="$compiler_flags $arg"
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
@@ -1659,11 +1620,10 @@
# -m* pass through architecture-specific compiler args for GCC
# -m*, -t[45]*, -txscale* pass through architecture-specific
# compiler args for GCC
- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
- # -F/path gives path to uninstalled frameworks, gcc on darwin
+ # -pg pass through profiling flag for GCC
# @file GCC response files
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+ -t[45]*|-txscale*|@*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
@@ -1691,9 +1651,9 @@
-no-install)
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
# The PATH hackery in wrapper scripts is required on Windows
- # and Darwin in order for the loader to find any dlls it needs.
+ # in order for the loader to find any dlls it needs.
$echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
$echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
fast_install=no
@@ -1752,7 +1712,7 @@
continue
;;
- -static | -static-libtool-libs)
+ -static)
# The effects of -static are defined in a previous loop.
# We used to do the same as -all-static on platforms that
# didn't have a PIC flag, but the assumption that the effects
@@ -2122,7 +2082,10 @@
case $pass in
dlopen) libs="$dlfiles" ;;
dlpreopen) libs="$dlprefiles" ;;
- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ link)
+ libs="$deplibs %DEPLIBS%"
+ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+ ;;
esac
fi
if test "$pass" = dlopen; then
@@ -2134,7 +2097,7 @@
lib=
found=no
case $deplib in
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
@@ -2530,9 +2493,7 @@
if test "$linkmode,$pass" = "prog,link"; then
if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
- test -z "$old_library"; }; then
+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
# We need to hardcode the library path
if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
@@ -3228,7 +3189,7 @@
# which has an extra 1 added just for fun
#
case $version_type in
- darwin|linux|osf|windows|none)
+ darwin|linux|osf|windows)
current=`expr $number_major + $number_minor`
age="$number_minor"
revision="$number_revision"
@@ -3239,10 +3200,14 @@
age="0"
;;
irix|nonstopux)
- current=`expr $number_major + $number_minor`
+ current=`expr $number_major + $number_minor - 1`
age="$number_minor"
revision="$number_minor"
- lt_irix_increment=no
+ ;;
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit $EXIT_FAILURE
;;
esac
;;
@@ -3301,8 +3266,7 @@
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
minor_current=`expr $current + 1`
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
;;
freebsd-aout)
@@ -3316,11 +3280,8 @@
;;
irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
- major=`expr $current - $age`
- else
- major=`expr $current - $age + 1`
- fi
+ major=`expr $current - $age + 1`
+
case $version_type in
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
@@ -3457,11 +3418,11 @@
fi
# Eliminate all temporary directories.
- #for path in $notinst_path; do
- # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
- # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
- #done
+ for path in $notinst_path; do
+ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+ done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
@@ -3562,12 +3523,13 @@
int main() { return 0; }
EOF
$rm conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
+ if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
for i in $deplibs; do
name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
+ if test "$name" != "" && test "$name" -ne "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
@@ -3606,7 +3568,9 @@
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ $LTCC $LTCFLAGS -o conftest conftest.c $i
+ # Did it work?
+ if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
@@ -3638,7 +3602,7 @@
droppeddeps=yes
$echo
$echo "*** Warning! Library $i is needed by this library but I was not able to"
- $echo "*** make it link in! You will probably need to install it or some"
+ $echo "*** make it link in! You will probably need to install it or some"
$echo "*** library that it depends on before this library will be fully"
$echo "*** functional. Installing it before continuing would be even better."
fi
@@ -3924,10 +3888,7 @@
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
if test -n "$hardcode_libdir_flag_spec_ld"; then
- case $archive_cmds in
- *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
- *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
- esac
+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
else
eval dep_rpath=\"$hardcode_libdir_flag_spec\"
fi
@@ -4286,14 +4247,12 @@
reload_conv_objs=
gentop=
# reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
+ # -Wl from whole_archive_flag_spec
wl=
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${obj}x"
generated="$generated $gentop"
@@ -4741,16 +4700,16 @@
case $host in
*cygwin* | *mingw* )
if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
else
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
fi
;;
* )
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
;;
esac
;;
@@ -4765,13 +4724,13 @@
# really was required.
# Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
fi
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
@@ -4858,7 +4817,7 @@
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
else
# fast_install is set to needless
relink_command=
@@ -4895,7 +4854,7 @@
fi
done
relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
fi
# Quote $echo for shipping.
@@ -5302,20 +5261,6 @@
Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
@@ -5458,7 +5403,7 @@
;;
esac
$echo >> $output "\
- \$echo \"\$0: cannot exec \$program \$*\"
+ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
exit $EXIT_FAILURE
fi
else
@@ -5644,7 +5589,7 @@
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
@@ -5989,9 +5934,9 @@
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
else
- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
+ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
$echo "$modename: warning: relinking \`$file'" 1>&2
@@ -6200,7 +6145,7 @@
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
+ relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
$show "$relink_command"
if $run eval "$relink_command"; then :
@@ -6411,10 +6356,8 @@
if test -f "$dir/$objdir/$dlname"; then
dir="$dir/$objdir"
else
- if test ! -f "$dir/$dlname"; then
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
- fi
+ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+ exit $EXIT_FAILURE
fi
;;
@@ -6478,12 +6421,12 @@
fi
# Restore saved environment variables
- for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
- do
- eval "if test \"\${save_$lt_var+set}\" = set; then
- $lt_var=\$save_$lt_var; export $lt_var
- fi"
- done
+ if test "${save_LC_ALL+set}" = set; then
+ LC_ALL="$save_LC_ALL"; export LC_ALL
+ fi
+ if test "${save_LANG+set}" = set; then
+ LANG="$save_LANG"; export LANG
+ fi
# Now prepare to actually exec the command.
exec_cmd="\$cmd$args"
@@ -6840,9 +6783,9 @@
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
+ try to export only the symbols listed in SYMFILE
-export-symbols-regex REGEX
- try to export only the symbols matching REGEX
+ try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
@@ -6856,11 +6799,9 @@
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of uninstalled libtool libraries
- -static-libtool-libs
- do not do any dynamic linking of libtool libraries
+ -static do not do any dynamic linking of libtool libraries
-version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
+ specify library version info [each variable defaults to 0]
All other options (arguments beginning with \`-') are ignored.
--- xserver-xorg-input-spaceorb-1.1.1.orig/config.sub
+++ xserver-xorg-input-spaceorb-1.1.1/config.sub
@@ -4,7 +4,7 @@
# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
# Inc.
-timestamp='2007-04-29'
+timestamp='2006-07-02'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -245,12 +245,12 @@
| bfin \
| c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
- | fido | fr30 | frv \
+ | fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
| m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore | mep \
+ | maxq | mb | microblaze | mcore \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
@@ -276,7 +276,6 @@
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
- | score \
| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
@@ -285,7 +284,7 @@
| tahoe | thumb | tic4x | tic80 | tron \
| v850 | v850e \
| we32k \
- | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+ | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
| z8k)
basic_machine=$basic_machine-unknown
;;
@@ -324,7 +323,7 @@
| clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
- | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| i*86-* | i860-* | i960-* | ia64-* \
@@ -368,7 +367,7 @@
| tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
- | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
| xstormy16-* | xtensa-* \
| ymp-* \
| z8k-*)
@@ -683,10 +682,6 @@
basic_machine=i386-pc
os=-mingw32
;;
- mingw32ce)
- basic_machine=arm-unknown
- os=-mingw32ce
- ;;
miniframe)
basic_machine=m68000-convergent
;;
@@ -914,10 +909,6 @@
sb1el)
basic_machine=mipsisa64sb1el-unknown
;;
- sde)
- basic_machine=mipsisa32-sde
- os=-elf
- ;;
sei)
basic_machine=mips-sei
os=-seiux
@@ -929,9 +920,6 @@
basic_machine=sh-hitachi
os=-hms
;;
- sh5el)
- basic_machine=sh5le-unknown
- ;;
sh64)
basic_machine=sh64-unknown
;;
@@ -1226,7 +1214,7 @@
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
+ | -skyos* | -haiku* | -rdos* | -toppers*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1378,9 +1366,6 @@
# system, and we'll never get to this point.
case $basic_machine in
- score-*)
- os=-elf
- ;;
spu-*)
os=-elf
;;
@@ -1421,9 +1406,6 @@
m68*-cisco)
os=-aout
;;
- mep-*)
- os=-elf
- ;;
mips*-cisco)
os=-elf
;;
--- xserver-xorg-input-spaceorb-1.1.1.orig/config.guess
+++ xserver-xorg-input-spaceorb-1.1.1/config.guess
@@ -4,7 +4,7 @@
# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
# Inc.
-timestamp='2007-05-17'
+timestamp='2006-07-02'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -161,7 +161,6 @@
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
- sh5el) machine=sh5le-unknown ;;
*) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
@@ -330,7 +329,7 @@
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
- i86pc:SunOS:5.*:* | ix86xen:SunOS:5.*:*)
+ i86pc:SunOS:5.*:*)
echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun4*:SunOS:6*:*)
@@ -781,7 +780,7 @@
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
exit ;;
- *:MINGW*:*)
+ i*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit ;;
i*:windows32*:*)
@@ -791,15 +790,12 @@
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
exit ;;
- *:Interix*:[3456]*)
- case ${UNAME_MACHINE} in
- x86)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- EM64T | authenticamd)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
- esac ;;
+ x86:Interix*:[3456]*)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ EM64T:Interix*:[3456]*)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
[345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
echo i${UNAME_MACHINE}-pc-mks
exit ;;
@@ -954,9 +950,6 @@
x86_64:Linux:*:*)
echo x86_64-unknown-linux-gnu
exit ;;
- xtensa:Linux:*:*)
- echo xtensa-unknown-linux-gnu
- exit ;;
i*86:Linux:*:*)
# The BFD linker knows what the default object file format is, so
# first see if it will tell us. cd to the root directory to prevent
@@ -1215,15 +1208,6 @@
SX-6:SUPER-UX:*:*)
echo sx6-nec-superux${UNAME_RELEASE}
exit ;;
- SX-7:SUPER-UX:*:*)
- echo sx7-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8:SUPER-UX:*:*)
- echo sx8-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8R:SUPER-UX:*:*)
- echo sx8r-nec-superux${UNAME_RELEASE}
- exit ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
exit ;;
--- xserver-xorg-input-spaceorb-1.1.1.orig/configure
+++ xserver-xorg-input-spaceorb-1.1.1/configure
@@ -809,7 +809,6 @@
INSTALL_PROGRAM
INSTALL_SCRIPT
INSTALL_DATA
-am__isrc
CYGPATH_W
PACKAGE
VERSION
@@ -856,7 +855,6 @@
CCDEPMODE
am__fastdepCC_TRUE
am__fastdepCC_FALSE
-SED
GREP
EGREP
LN_S
@@ -1996,8 +1994,7 @@
ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-am__api_version='1.10'
-
+am__api_version="1.9"
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
@@ -2149,53 +2146,38 @@
echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
-{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
-if test -z "$MKDIR_P"; then
- if test "${ac_cv_path_mkdir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
- 'mkdir (GNU coreutils) '* | \
- 'mkdir (coreutils) '* | \
- 'mkdir (fileutils) '4.1*)
- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
- break 3;;
- esac
- done
- done
-done
-IFS=$as_save_IFS
-
-fi
-
- if test "${ac_cv_path_mkdir+set}" = set; then
- MKDIR_P="$ac_cv_path_mkdir -p"
+if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
else
- # As a last resort, use the slow shell script. Don't cache a
- # value for MKDIR_P within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- test -d ./--version && rmdir ./--version
- MKDIR_P="$ac_install_sh -d"
+ mkdir_p='$(install_sh) -d'
fi
fi
-{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-echo "${ECHO_T}$MKDIR_P" >&6; }
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
for ac_prog in gawk mawk nawk awk
do
@@ -2278,16 +2260,12 @@
fi
rmdir .tst 2>/dev/null
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- am__isrc=' -I$(srcdir)'
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
- fi
fi
# test whether we have cygpath
@@ -2330,7 +2308,7 @@
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
@@ -2434,7 +2412,7 @@
fi
fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
@@ -2460,7 +2438,9 @@
{ echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
- if test $USE_MAINTAINER_MODE = yes; then
+
+
+if test $USE_MAINTAINER_MODE = yes; then
MAINTAINER_MODE_TRUE=
MAINTAINER_MODE_FALSE='#'
else
@@ -2688,7 +2668,9 @@
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
- if test "x$enable_dependency_tracking" != xno; then
+
+
+if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
AMDEP_FALSE='#'
else
@@ -2697,6 +2679,7 @@
fi
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3683,7 +3666,6 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -3713,7 +3695,9 @@
echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
- if
+
+
+if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
@@ -3738,13 +3722,12 @@
test -z "$as_dir" && as_dir=.
for lt_ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
fi
done
done
done
-IFS=$as_save_IFS
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
@@ -3779,7 +3762,6 @@
fi
SED=$lt_cv_path_SED
-
{ echo "$as_me:$LINENO: result: $SED" >&5
echo "${ECHO_T}$SED" >&6; }
@@ -4141,8 +4123,8 @@
echo "${ECHO_T}no, using $LN_S" >&6; }
fi
-{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
+echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6; }
if test "${lt_cv_deplibs_check_method+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4183,15 +4165,9 @@
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
+ # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
darwin* | rhapsody*)
@@ -4236,7 +4212,7 @@
esac
;;
-interix[3-9]*)
+interix3*)
# PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
;;
@@ -4256,7 +4232,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-netbsd*)
+netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
@@ -4286,10 +4262,6 @@
lt_cv_deplibs_check_method=pass_all
;;
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
solaris*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -4377,7 +4349,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 4380 "configure"' > conftest.$ac_ext
+ echo '#line 4352 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
@@ -4412,8 +4384,7 @@
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
@@ -4424,9 +4395,6 @@
case `/usr/bin/file conftest.o` in
*32-bit*)
case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
x86_64-*linux*)
LD="${LD-ld} -m elf_i386"
;;
@@ -4443,9 +4411,6 @@
;;
*64-bit*)
case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
@@ -5613,7 +5578,6 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -5643,7 +5607,9 @@
echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
- if
+
+
+if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
am__fastdepCXX_TRUE=
@@ -6238,27 +6204,24 @@
fi
;;
*)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
+ new_result=`expr "X$teststring" : ".*" 2>&1` &&
+ lt_cv_sys_max_cmd_len=$new_result &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on massive
+ # amounts of additional arguments before passing them to the linker.
+ # It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
;;
esac
@@ -6275,7 +6238,6 @@
-
# Check for command to grab the raw symbol name followed by C symbol from nm.
{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
@@ -6864,7 +6826,7 @@
test -z "$ac_objext" && ac_objext=o
# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
@@ -7064,10 +7026,10 @@
objext=$objext
# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+lt_simple_compile_test_code="int some_variable = 0;\n"
# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
+lt_simple_link_test_code='int main(){return(0);}\n'
# If no C compiler was specified, use CC.
@@ -7082,13 +7044,13 @@
# save warnings/boilerplate of simple test code
ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$rm conftest*
ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$rm conftest*
@@ -7108,7 +7070,7 @@
else
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-fno-rtti -fno-exceptions"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -7119,11 +7081,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7122: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7084: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:7126: \$? = $ac_status" >&5
+ echo "$as_me:7088: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -7174,15 +7136,13 @@
lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
lt_prog_compiler_pic='-DDLL_EXPORT'
;;
@@ -7192,7 +7152,7 @@
lt_prog_compiler_pic='-fno-common'
;;
- interix[3-9]*)
+ interix3*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
@@ -7250,7 +7210,7 @@
esac
;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
@@ -7302,22 +7262,6 @@
# All Alpha code is PIC.
lt_prog_compiler_static='-non_shared'
;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl=''
- ;;
- esac
- ;;
esac
;;
@@ -7327,10 +7271,6 @@
lt_prog_compiler_static='-non_shared'
;;
- rdos*)
- lt_prog_compiler_static='-non_shared'
- ;;
-
solaris*)
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
@@ -7398,7 +7338,7 @@
else
lt_prog_compiler_pic_works=no
ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -7409,11 +7349,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7412: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7352: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:7416: \$? = $ac_status" >&5
+ echo "$as_me:7356: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -7462,7 +7402,7 @@
lt_prog_compiler_static_works=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
@@ -7502,7 +7442,7 @@
mkdir conftest
cd conftest
mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -7513,11 +7453,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7516: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7456: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:7520: \$? = $ac_status" >&5
+ echo "$as_me:7460: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -7709,7 +7649,7 @@
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -7727,7 +7667,7 @@
fi
;;
- interix[3-9]*)
+ interix3*)
hardcode_direct=no
hardcode_shlibpath_var=no
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
@@ -7742,7 +7682,7 @@
archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- gnu* | linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
tmp_addflag=
case $cc_basename,$host_cpu in
@@ -7760,29 +7700,21 @@
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
+ link_all_deplibs=no
else
ld_shlibs=no
fi
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
@@ -7934,7 +7866,7 @@
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
- :
+ hardcode_direct=yes
else
# We have old collect2
hardcode_direct=unsupported
@@ -8008,18 +7940,11 @@
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -8074,18 +7999,11 @@
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -8139,7 +8057,7 @@
# The linker will automatically build a .lib file if we build a DLL.
old_archive_From_new_cmds='true'
# FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
fix_srcfile_path='`cygpath -w "$srcfile"`'
enable_shared_with_static_runtimes=yes
;;
@@ -8181,10 +8099,10 @@
case $cc_basename in
xlc*)
output_verbose_link_cmd='echo'
- archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
*)
@@ -8326,7 +8244,7 @@
link_all_deplibs=yes
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
@@ -8346,28 +8264,24 @@
;;
openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
else
- ld_shlibs=no
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
fi
;;
@@ -8426,16 +8340,17 @@
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
+ # The compiler driver will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl, iff we do not link with $LD.
+ # Luckily, gcc supports the same syntax we need for Sun Studio.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
- fi
- ;;
+ case $wlarc in
+ '')
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ *)
+ whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ esac ;;
esac
link_all_deplibs=yes
;;
@@ -8492,7 +8407,7 @@
fi
;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
no_undefined_flag='${wl}-z,text'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
@@ -8569,7 +8484,7 @@
{ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
$rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
@@ -8627,55 +8542,17 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[lt_foo]++; }
- if (lt_freq[lt_foo] == 1) { print lt_foo; }
-}'`
- sys_lib_search_path_spec=`echo $lt_search_path_spec`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi
@@ -8835,8 +8712,12 @@
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+ if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+ else
+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+ fi
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -8890,7 +8771,7 @@
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- *) # from 4.6 on, and DragonFly
+ freebsd*) # from 4.6 on
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -8953,7 +8834,7 @@
postinstall_cmds='chmod 555 $lib'
;;
-interix[3-9]*)
+interix3*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -9024,7 +8905,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -9037,6 +8918,18 @@
dynamic_linker='GNU/Linux ld.so'
;;
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
netbsd*)
version_type=sunos
need_lib_prefix=no
@@ -9118,10 +9011,6 @@
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
-rdos*)
- dynamic_linker=no
- ;;
-
solaris*)
version_type=linux
need_lib_prefix=no
@@ -9275,7 +9164,6 @@
darwin*)
if test -n "$STRIP" ; then
striplib="$STRIP -x"
- old_striplib="$STRIP -S"
{ echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
@@ -9862,7 +9750,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext < conftest.$ac_ext <conftest.$ac_ext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$rm conftest*
ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$rm conftest*
@@ -10982,7 +10869,7 @@
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
- :
+ hardcode_direct_CXX=yes
else
# We have old collect2
hardcode_direct_CXX=unsupported
@@ -11056,18 +10943,11 @@
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -11123,18 +11003,11 @@
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -11253,10 +11126,10 @@
case $cc_basename in
xlc*)
output_verbose_link_cmd='echo'
- archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+ archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
*)
@@ -11339,7 +11212,9 @@
hardcode_libdir_separator_CXX=:
case $host_cpu in
- hppa*64*|ia64*) ;;
+ hppa*64*|ia64*)
+ hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
+ ;;
*)
export_dynamic_flag_spec_CXX='${wl}-E'
;;
@@ -11407,7 +11282,7 @@
;;
esac
;;
- interix[3-9]*)
+ interix3*)
hardcode_direct_CXX=no
hardcode_shlibpath_var_CXX=no
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
@@ -11527,29 +11402,6 @@
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- no_undefined_flag_CXX=' -zdefs'
- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
- # Not sure whether something based on
- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
- # would be better.
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
- ;;
- esac
- ;;
esac
;;
lynxos*)
@@ -11572,7 +11424,7 @@
;;
esac
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
@@ -11588,20 +11440,16 @@
ld_shlibs_CXX=no
;;
openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct_CXX=yes
- hardcode_shlibpath_var_CXX=no
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- export_dynamic_flag_spec_CXX='${wl}-E'
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- else
- ld_shlibs_CXX=no
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
fi
+ output_verbose_link_cmd='echo'
;;
osf3*)
case $cc_basename in
@@ -11763,10 +11611,15 @@
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
+ # The C++ compiler is used as linker so we must use $wl
+ # flag to pass the commands to the underlying system
+ # linker. We must also pass each convience library through
+ # to the system linker between allextract/defaultextract.
+ # The C++ compiler will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
;;
esac
link_all_deplibs_CXX=yes
@@ -11813,12 +11666,6 @@
fi
hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
fi
;;
esac
@@ -12010,7 +11857,7 @@
# PORTME: override above test on systems where it is broken
case $host_os in
-interix[3-9]*)
+interix3*)
# Interix 3.5 installs completely hosed .la files for C++, so rather than
# hack all around it, let's just trust "g++" to DTRT.
predep_objects_CXX=
@@ -12018,46 +11865,13 @@
postdeps_CXX=
;;
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- #
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
- if test "$solaris_use_stlport4" != yes; then
- postdeps_CXX='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
solaris*)
case $cc_basename in
CC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
# Adding this requires a known-good setup of shared libraries for
# Sun compiler versions before 5.6, else PIC objects from an old
# archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- postdeps_CXX='-library=Cstd -library=Crun'
- fi
+ postdeps_CXX='-lCstd -lCrun'
;;
esac
;;
@@ -12094,14 +11908,12 @@
# like `-m68040'.
lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | cygwin* | os2* | pw32*)
+ mingw* | os2* | pw32*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
;;
darwin* | rhapsody*)
@@ -12113,7 +11925,7 @@
# DJGPP does not support shared libraries at all
lt_prog_compiler_pic_CXX=
;;
- interix[3-9]*)
+ interix3*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
@@ -12249,14 +12061,6 @@
lt_prog_compiler_static_CXX='-non_shared'
;;
*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
- lt_prog_compiler_wl_CXX='-Qoption ld '
- ;;
- esac
;;
esac
;;
@@ -12273,7 +12077,7 @@
;;
esac
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
;;
osf3* | osf4* | osf5*)
case $cc_basename in
@@ -12371,7 +12175,7 @@
else
lt_prog_compiler_pic_works_CXX=no
ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -12382,11 +12186,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:12385: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:12189: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:12389: \$? = $ac_status" >&5
+ echo "$as_me:12193: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -12435,7 +12239,7 @@
lt_prog_compiler_static_works_CXX=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
@@ -12475,7 +12279,7 @@
mkdir conftest
cd conftest
mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -12486,11 +12290,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:12489: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:12293: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:12493: \$? = $ac_status" >&5
+ echo "$as_me:12297: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -12556,7 +12360,10 @@
export_symbols_cmds_CXX="$ltdll_cmds"
;;
cygwin* | mingw*)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ linux* | k*bsd*-gnu)
+ link_all_deplibs_CXX=no
;;
*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
@@ -12587,7 +12394,7 @@
{ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
$rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
@@ -12645,7 +12452,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
+if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
need_lib_prefix=unknown
hardcode_into_libs=no
@@ -12802,7 +12622,12 @@
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+ if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+ else
+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+ fi
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -12856,7 +12681,7 @@
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- *) # from 4.6 on, and DragonFly
+ freebsd*) # from 4.6 on
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -12919,7 +12744,7 @@
postinstall_cmds='chmod 555 $lib'
;;
-interix[3-9]*)
+interix3*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -12990,7 +12815,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -13003,6 +12828,18 @@
dynamic_linker='GNU/Linux ld.so'
;;
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
netbsd*)
version_type=sunos
need_lib_prefix=no
@@ -13084,10 +12921,6 @@
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
-rdos*)
- dynamic_linker=no
- ;;
-
solaris*)
version_type=linux
need_lib_prefix=no
@@ -13282,7 +13115,6 @@
module_cmds_CXX \
module_expsym_cmds_CXX \
lt_cv_prog_compiler_c_o_CXX \
- fix_srcfile_path_CXX \
exclude_expsyms_CXX \
include_expsyms_CXX; do
@@ -13603,7 +13435,7 @@
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
+fix_srcfile_path="$fix_srcfile_path_CXX"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols_CXX
@@ -13694,17 +13526,10 @@
objext_F77=$objext
# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
+lt_simple_compile_test_code=" subroutine t\n return\n end\n"
# Code to be used in simple link tests
-lt_simple_link_test_code="\
- program t
- end
-"
+lt_simple_link_test_code=" program t\n end\n"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
@@ -13720,13 +13545,13 @@
# save warnings/boilerplate of simple test code
ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$rm conftest*
ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$rm conftest*
@@ -13813,15 +13638,13 @@
lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
lt_prog_compiler_pic_F77='-DDLL_EXPORT'
;;
@@ -13831,7 +13654,7 @@
lt_prog_compiler_pic_F77='-fno-common'
;;
- interix[3-9]*)
+ interix3*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
@@ -13889,7 +13712,7 @@
esac
;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic_F77='-DDLL_EXPORT'
@@ -13941,22 +13764,6 @@
# All Alpha code is PIC.
lt_prog_compiler_static_F77='-non_shared'
;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- lt_prog_compiler_wl_F77='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- lt_prog_compiler_wl_F77=''
- ;;
- esac
- ;;
esac
;;
@@ -13966,10 +13773,6 @@
lt_prog_compiler_static_F77='-non_shared'
;;
- rdos*)
- lt_prog_compiler_static_F77='-non_shared'
- ;;
-
solaris*)
lt_prog_compiler_pic_F77='-KPIC'
lt_prog_compiler_static_F77='-Bstatic'
@@ -14037,7 +13840,7 @@
else
lt_prog_compiler_pic_works_F77=no
ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic_F77"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -14048,11 +13851,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14051: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:13854: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:14055: \$? = $ac_status" >&5
+ echo "$as_me:13858: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -14101,7 +13904,7 @@
lt_prog_compiler_static_works_F77=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
@@ -14141,7 +13944,7 @@
mkdir conftest
cd conftest
mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -14152,11 +13955,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14155: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:13958: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:14159: \$? = $ac_status" >&5
+ echo "$as_me:13962: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -14348,7 +14151,7 @@
allow_undefined_flag_F77=unsupported
always_export_symbols_F77=no
enable_shared_with_static_runtimes_F77=yes
- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -14366,7 +14169,7 @@
fi
;;
- interix[3-9]*)
+ interix3*)
hardcode_direct_F77=no
hardcode_shlibpath_var_F77=no
hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
@@ -14381,7 +14184,7 @@
archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- gnu* | linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
tmp_addflag=
case $cc_basename,$host_cpu in
@@ -14399,29 +14202,21 @@
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
if test $supports_anon_versioning = yes; then
archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
+ link_all_deplibs_F77=no
else
ld_shlibs_F77=no
fi
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
@@ -14573,7 +14368,7 @@
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
- :
+ hardcode_direct_F77=yes
else
# We have old collect2
hardcode_direct_F77=unsupported
@@ -14637,18 +14432,11 @@
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -14693,18 +14481,11 @@
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -14758,7 +14539,7 @@
# The linker will automatically build a .lib file if we build a DLL.
old_archive_From_new_cmds_F77='true'
# FIXME: Should let the user specify the lib program.
- old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
enable_shared_with_static_runtimes_F77=yes
;;
@@ -14800,10 +14581,10 @@
case $cc_basename in
xlc*)
output_verbose_link_cmd='echo'
- archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+ archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
*)
@@ -14945,7 +14726,7 @@
link_all_deplibs_F77=yes
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
@@ -14965,28 +14746,24 @@
;;
openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_F77='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- ;;
- *)
- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- ;;
- esac
- fi
+ hardcode_direct_F77=yes
+ hardcode_shlibpath_var_F77=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_F77='${wl}-E'
else
- ld_shlibs_F77=no
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec_F77='-R$libdir'
+ ;;
+ *)
+ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+ ;;
+ esac
fi
;;
@@ -15045,16 +14822,17 @@
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
+ # The compiler driver will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl, iff we do not link with $LD.
+ # Luckily, gcc supports the same syntax we need for Sun Studio.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
- fi
- ;;
+ case $wlarc in
+ '')
+ whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
+ *)
+ whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ esac ;;
esac
link_all_deplibs_F77=yes
;;
@@ -15111,7 +14889,7 @@
fi
;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
no_undefined_flag_F77='${wl}-z,text'
archive_cmds_need_lc_F77=no
hardcode_shlibpath_var_F77=no
@@ -15188,7 +14966,7 @@
{ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
$rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
@@ -15246,7 +15024,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
+if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
need_lib_prefix=unknown
hardcode_into_libs=no
@@ -15403,7 +15194,12 @@
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+ if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+ else
+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+ fi
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -15457,7 +15253,7 @@
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- *) # from 4.6 on, and DragonFly
+ freebsd*) # from 4.6 on
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -15520,7 +15316,7 @@
postinstall_cmds='chmod 555 $lib'
;;
-interix[3-9]*)
+interix3*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -15591,7 +15387,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -15604,6 +15400,18 @@
dynamic_linker='GNU/Linux ld.so'
;;
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
netbsd*)
version_type=sunos
need_lib_prefix=no
@@ -15685,10 +15493,6 @@
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
-rdos*)
- dynamic_linker=no
- ;;
-
solaris*)
version_type=linux
need_lib_prefix=no
@@ -15883,7 +15687,6 @@
module_cmds_F77 \
module_expsym_cmds_F77 \
lt_cv_prog_compiler_c_o_F77 \
- fix_srcfile_path_F77 \
exclude_expsyms_F77 \
include_expsyms_F77; do
@@ -16204,7 +16007,7 @@
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
+fix_srcfile_path="$fix_srcfile_path_F77"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols_F77
@@ -16262,10 +16065,10 @@
objext_GCJ=$objext
# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
+lt_simple_compile_test_code="class foo {}\n"
# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
@@ -16281,13 +16084,13 @@
# save warnings/boilerplate of simple test code
ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$rm conftest*
ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$rm conftest*
@@ -16328,7 +16131,7 @@
else
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-fno-rtti -fno-exceptions"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -16339,11 +16142,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16342: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16145: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16346: \$? = $ac_status" >&5
+ echo "$as_me:16149: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -16394,15 +16197,13 @@
lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
;;
@@ -16412,7 +16213,7 @@
lt_prog_compiler_pic_GCJ='-fno-common'
;;
- interix[3-9]*)
+ interix3*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
@@ -16470,7 +16271,7 @@
esac
;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
@@ -16522,22 +16323,6 @@
# All Alpha code is PIC.
lt_prog_compiler_static_GCJ='-non_shared'
;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- lt_prog_compiler_wl_GCJ='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- lt_prog_compiler_wl_GCJ=''
- ;;
- esac
- ;;
esac
;;
@@ -16547,10 +16332,6 @@
lt_prog_compiler_static_GCJ='-non_shared'
;;
- rdos*)
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
solaris*)
lt_prog_compiler_pic_GCJ='-KPIC'
lt_prog_compiler_static_GCJ='-Bstatic'
@@ -16618,7 +16399,7 @@
else
lt_prog_compiler_pic_works_GCJ=no
ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -16629,11 +16410,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16632: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16413: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16636: \$? = $ac_status" >&5
+ echo "$as_me:16417: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -16682,7 +16463,7 @@
lt_prog_compiler_static_works_GCJ=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
@@ -16722,7 +16503,7 @@
mkdir conftest
cd conftest
mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -16733,11 +16514,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16736: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16517: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:16740: \$? = $ac_status" >&5
+ echo "$as_me:16521: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -16929,7 +16710,7 @@
allow_undefined_flag_GCJ=unsupported
always_export_symbols_GCJ=no
enable_shared_with_static_runtimes_GCJ=yes
- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -16947,7 +16728,7 @@
fi
;;
- interix[3-9]*)
+ interix3*)
hardcode_direct_GCJ=no
hardcode_shlibpath_var_GCJ=no
hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
@@ -16962,7 +16743,7 @@
archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- gnu* | linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
tmp_addflag=
case $cc_basename,$host_cpu in
@@ -16980,29 +16761,21 @@
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
if test $supports_anon_versioning = yes; then
archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
+ link_all_deplibs_GCJ=no
else
ld_shlibs_GCJ=no
fi
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
@@ -17154,7 +16927,7 @@
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
- :
+ hardcode_direct_GCJ=yes
else
# We have old collect2
hardcode_direct_GCJ=unsupported
@@ -17228,18 +17001,11 @@
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -17294,18 +17060,11 @@
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -17359,7 +17118,7 @@
# The linker will automatically build a .lib file if we build a DLL.
old_archive_From_new_cmds_GCJ='true'
# FIXME: Should let the user specify the lib program.
- old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
enable_shared_with_static_runtimes_GCJ=yes
;;
@@ -17401,10 +17160,10 @@
case $cc_basename in
xlc*)
output_verbose_link_cmd='echo'
- archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+ archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
*)
@@ -17546,7 +17305,7 @@
link_all_deplibs_GCJ=yes
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
@@ -17566,28 +17325,24 @@
;;
openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_GCJ='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- ;;
- *)
- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- ;;
- esac
- fi
+ hardcode_direct_GCJ=yes
+ hardcode_shlibpath_var_GCJ=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_GCJ='${wl}-E'
else
- ld_shlibs_GCJ=no
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
+ ;;
+ *)
+ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+ ;;
+ esac
fi
;;
@@ -17646,16 +17401,17 @@
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
+ # The compiler driver will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl, iff we do not link with $LD.
+ # Luckily, gcc supports the same syntax we need for Sun Studio.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
- fi
- ;;
+ case $wlarc in
+ '')
+ whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
+ *)
+ whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ esac ;;
esac
link_all_deplibs_GCJ=yes
;;
@@ -17712,7 +17468,7 @@
fi
;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
no_undefined_flag_GCJ='${wl}-z,text'
archive_cmds_need_lc_GCJ=no
hardcode_shlibpath_var_GCJ=no
@@ -17789,7 +17545,7 @@
{ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
$rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
@@ -17847,7 +17603,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
+if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
need_lib_prefix=unknown
hardcode_into_libs=no
@@ -18004,7 +17773,12 @@
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+ if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+ else
+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+ fi
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -18058,7 +17832,7 @@
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- *) # from 4.6 on, and DragonFly
+ freebsd*) # from 4.6 on
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -18121,7 +17895,7 @@
postinstall_cmds='chmod 555 $lib'
;;
-interix[3-9]*)
+interix3*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -18192,7 +17966,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -18205,6 +17979,18 @@
dynamic_linker='GNU/Linux ld.so'
;;
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
netbsd*)
version_type=sunos
need_lib_prefix=no
@@ -18286,10 +18072,6 @@
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
-rdos*)
- dynamic_linker=no
- ;;
-
solaris*)
version_type=linux
need_lib_prefix=no
@@ -18484,7 +18266,6 @@
module_cmds_GCJ \
module_expsym_cmds_GCJ \
lt_cv_prog_compiler_c_o_GCJ \
- fix_srcfile_path_GCJ \
exclude_expsyms_GCJ \
include_expsyms_GCJ; do
@@ -18805,7 +18586,7 @@
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
+fix_srcfile_path="$fix_srcfile_path_GCJ"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols_GCJ
@@ -18862,7 +18643,7 @@
objext_RC=$objext
# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
# Code to be used in simple link tests
lt_simple_link_test_code="$lt_simple_compile_test_code"
@@ -18881,13 +18662,13 @@
# save warnings/boilerplate of simple test code
ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$rm conftest*
ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$rm conftest*
@@ -18965,7 +18746,6 @@
module_cmds_RC \
module_expsym_cmds_RC \
lt_cv_prog_compiler_c_o_RC \
- fix_srcfile_path_RC \
exclude_expsyms_RC \
include_expsyms_RC; do
@@ -19286,7 +19066,7 @@
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
+fix_srcfile_path="$fix_srcfile_path_RC"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols_RC
@@ -20128,7 +19908,6 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -20158,7 +19937,9 @@
echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
- if
+
+
+if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
@@ -20532,7 +20313,7 @@
and XORG_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
-To get pkg-config, see .
+To get pkg-config, see .
See \`config.log' for more details." >&5
echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
@@ -20542,7 +20323,7 @@
and XORG_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
-To get pkg-config, see .
+To get pkg-config, see .
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
else
@@ -21343,7 +21124,6 @@
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -21553,7 +21333,6 @@
INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
INSTALL_DATA!$INSTALL_DATA$ac_delim
-am__isrc!$am__isrc$ac_delim
CYGPATH_W!$CYGPATH_W$ac_delim
PACKAGE!$PACKAGE$ac_delim
VERSION!$VERSION$ac_delim
@@ -21600,7 +21379,6 @@
CCDEPMODE!$CCDEPMODE$ac_delim
am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-SED!$SED$ac_delim
GREP!$GREP$ac_delim
EGREP!$EGREP$ac_delim
LN_S!$LN_S$ac_delim
@@ -21610,6 +21388,8 @@
CPP!$CPP$ac_delim
CXX!$CXX$ac_delim
CXXFLAGS!$CXXFLAGS$ac_delim
+ac_ct_CXX!$ac_ct_CXX$ac_delim
+CXXDEPMODE!$CXXDEPMODE$ac_delim
_ACEOF
if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -21651,8 +21431,6 @@
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
cat >conf$$subs.sed <<_ACEOF
-ac_ct_CXX!$ac_ct_CXX$ac_delim
-CXXDEPMODE!$CXXDEPMODE$ac_delim
am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
CXXCPP!$CXXCPP$ac_delim
@@ -21680,7 +21458,7 @@
LTLIBOBJS!$LTLIBOBJS$ac_delim
_ACEOF
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 27; then
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 25; then
break
elif $ac_last_try; then
{ { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
@@ -21907,11 +21685,6 @@
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
- ac_MKDIR_P=$MKDIR_P
- case $MKDIR_P in
- [\\/$]* | ?:[\\/]* ) ;;
- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
- esac
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -21965,7 +21738,6 @@
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
@@ -22130,9 +21902,8 @@
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
--- xserver-xorg-input-spaceorb-1.1.1.orig/mkinstalldirs
+++ xserver-xorg-input-spaceorb-1.1.1/mkinstalldirs
@@ -0,0 +1,158 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+
+scriptversion=2005-06-29.22
+
+# Original author: Noah Friedman
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to or send patches to
+# .
+
+errstatus=0
+dirmode=
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to ."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage"
+ exit $?
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --version)
+ echo "$0 $scriptversion"
+ exit $?
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
+
+for file
+do
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error. This is a problem when calling mkinstalldirs
+# from a parallel make. We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
+case $dirmode in
+ '')
+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ test -d ./-p && rmdir ./-p
+ test -d ./--version && rmdir ./--version
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+ test ! -d ./--version; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ else
+ # Clean up after NextStep and OpenStep mkdir.
+ for d in ./-m ./-p ./--version "./$dirmode";
+ do
+ test -d $d && rmdir $d
+ done
+ fi
+ ;;
+esac
+
+for file
+do
+ case $file in
+ /*) pathcomp=/ ;;
+ *) pathcomp= ;;
+ esac
+ oIFS=$IFS
+ IFS=/
+ set fnord $file
+ shift
+ IFS=$oIFS
+
+ for d
+ do
+ test "x$d" = x && continue
+
+ pathcomp=$pathcomp$d
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
+
+ pathcomp=$pathcomp/
+ done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- xserver-xorg-input-spaceorb-1.1.1.orig/man/Makefile.in
+++ xserver-xorg-input-spaceorb-1.1.1/man/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -41,11 +41,15 @@
# from the copyright holders.
#
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -65,7 +69,7 @@
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
@@ -83,6 +87,8 @@
ACLOCAL = @ACLOCAL@
ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
APP_MAN_DIR = @APP_MAN_DIR@
APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
@@ -117,7 +123,6 @@
FILE_MAN_DIR = @FILE_MAN_DIR@
FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
GREP = @GREP@
-INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -131,10 +136,11 @@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MISC_MAN_DIR = @MISC_MAN_DIR@
MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
-MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -145,20 +151,19 @@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
-SED = sed
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
XORG_CFLAGS = @XORG_CFLAGS@
XORG_LIBS = @XORG_LIBS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -170,7 +175,6 @@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
-builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -199,11 +203,8 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
drivermandir = $(DRIVER_MAN_DIR)
#driverman_PRE = @DRIVER_NAME@.man
@@ -211,6 +212,7 @@
#EXTRA_DIST = @DRIVER_NAME@.man
CLEANFILES = $(driverman_DATA)
+SED = sed
# Strings to replace in man pages
XORGRELSTRING = @PACKAGE_STRING@
@@ -267,9 +269,13 @@
clean-libtool:
-rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
install-drivermanDATA: $(driverman_DATA)
@$(NORMAL_INSTALL)
- test -z "$(drivermandir)" || $(MKDIR_P) "$(DESTDIR)$(drivermandir)"
+ test -z "$(drivermandir)" || $(mkdir_p) "$(DESTDIR)$(drivermandir)"
@list='$(driverman_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
@@ -292,21 +298,22 @@
distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -322,7 +329,7 @@
all-am: Makefile $(DATA)
installdirs:
for dir in "$(DESTDIR)$(drivermandir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
@@ -355,7 +362,7 @@
distclean: distclean-am
-rm -f Makefile
-distclean-am: clean-am distclean-generic
+distclean-am: clean-am distclean-generic distclean-libtool
dvi: dvi-am
@@ -369,20 +376,12 @@
install-data-am: install-drivermanDATA
-install-dvi: install-dvi-am
-
install-exec-am:
-install-html: install-html-am
-
install-info: install-info-am
install-man:
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -401,21 +400,18 @@
ps-am:
-uninstall-am: uninstall-drivermanDATA
-
-.MAKE: install-am install-strip
+uninstall-am: uninstall-drivermanDATA uninstall-info-am
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-drivermanDATA install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- uninstall uninstall-am uninstall-drivermanDATA
+ install-data install-data-am install-drivermanDATA \
+ install-exec install-exec-am install-info install-info-am \
+ install-man install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am uninstall uninstall-am uninstall-drivermanDATA \
+ uninstall-info-am
.man.$(DRIVER_MAN_SUFFIX):
--- xserver-xorg-input-spaceorb-1.1.1.orig/src/Makefile.in
+++ xserver-xorg-input-spaceorb-1.1.1/src/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -34,11 +34,15 @@
# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -58,7 +62,7 @@
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -73,21 +77,17 @@
@DRIVER_NAME@_drv_la_LIBADD =
am_@DRIVER_NAME@_drv_la_OBJECTS = @DRIVER_NAME@.lo
@DRIVER_NAME@_drv_la_OBJECTS = $(am_@DRIVER_NAME@_drv_la_OBJECTS)
-@DRIVER_NAME@_drv_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(@DRIVER_NAME@_drv_la_LDFLAGS) $(LDFLAGS) -o $@
-DEFAULT_INCLUDES = -I. -I$(top_builddir)@am__isrc@
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
+LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(@DRIVER_NAME@_drv_la_SOURCES)
DIST_SOURCES = $(@DRIVER_NAME@_drv_la_SOURCES)
ETAGS = etags
@@ -96,6 +96,8 @@
ACLOCAL = @ACLOCAL@
ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
APP_MAN_DIR = @APP_MAN_DIR@
APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
@@ -130,7 +132,6 @@
FILE_MAN_DIR = @FILE_MAN_DIR@
FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
GREP = @GREP@
-INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -144,10 +145,11 @@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MISC_MAN_DIR = @MISC_MAN_DIR@
MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
-MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -158,20 +160,19 @@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
-SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
XORG_CFLAGS = @XORG_CFLAGS@
XORG_LIBS = @XORG_LIBS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -183,7 +184,6 @@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
-builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -212,11 +212,8 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
# this is obnoxious:
# -module lets us name the module exactly how we want
@@ -262,7 +259,7 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
install-@DRIVER_NAME@_drv_laLTLIBRARIES: $(@DRIVER_NAME@_drv_la_LTLIBRARIES)
@$(NORMAL_INSTALL)
- test -z "$(@DRIVER_NAME@_drv_ladir)" || $(MKDIR_P) "$(DESTDIR)$(@DRIVER_NAME@_drv_ladir)"
+ test -z "$(@DRIVER_NAME@_drv_ladir)" || $(mkdir_p) "$(DESTDIR)$(@DRIVER_NAME@_drv_ladir)"
@list='$(@DRIVER_NAME@_drv_la_LTLIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
f=$(am__strip_dir) \
@@ -273,7 +270,7 @@
uninstall-@DRIVER_NAME@_drv_laLTLIBRARIES:
@$(NORMAL_UNINSTALL)
- @list='$(@DRIVER_NAME@_drv_la_LTLIBRARIES)'; for p in $$list; do \
+ @set -x; list='$(@DRIVER_NAME@_drv_la_LTLIBRARIES)'; for p in $$list; do \
p=$(am__strip_dir) \
echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(@DRIVER_NAME@_drv_ladir)/$$p'"; \
$(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(@DRIVER_NAME@_drv_ladir)/$$p"; \
@@ -288,7 +285,7 @@
rm -f "$${dir}/so_locations"; \
done
@DRIVER_NAME@_drv.la: $(@DRIVER_NAME@_drv_la_OBJECTS) $(@DRIVER_NAME@_drv_la_DEPENDENCIES)
- $(@DRIVER_NAME@_drv_la_LINK) -rpath $(@DRIVER_NAME@_drv_ladir) $(@DRIVER_NAME@_drv_la_OBJECTS) $(@DRIVER_NAME@_drv_la_LIBADD) $(LIBS)
+ $(LINK) -rpath $(@DRIVER_NAME@_drv_ladir) $(@DRIVER_NAME@_drv_la_LDFLAGS) $(@DRIVER_NAME@_drv_la_OBJECTS) $(@DRIVER_NAME@_drv_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
@@ -299,22 +296,22 @@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/@DRIVER_NAME@.Plo@am__quote@
.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -325,6 +322,10 @@
clean-libtool:
-rm -rf .libs _libs
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
+
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -374,21 +375,22 @@
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -404,7 +406,7 @@
all-am: Makefile $(LTLIBRARIES)
installdirs:
for dir in "$(DESTDIR)$(@DRIVER_NAME@_drv_ladir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
@@ -439,7 +441,7 @@
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
+ distclean-libtool distclean-tags
dvi: dvi-am
@@ -453,20 +455,12 @@
install-data-am: install-@DRIVER_NAME@_drv_laLTLIBRARIES
-install-dvi: install-dvi-am
-
install-exec-am:
-install-html: install-html-am
-
install-info: install-info-am
install-man:
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -487,9 +481,8 @@
ps-am:
-uninstall-am: uninstall-@DRIVER_NAME@_drv_laLTLIBRARIES
-
-.MAKE: install-am install-strip
+uninstall-am: uninstall-@DRIVER_NAME@_drv_laLTLIBRARIES \
+ uninstall-info-am
.PHONY: CTAGS GTAGS all all-am check check-am clean \
clean-@DRIVER_NAME@_drv_laLTLIBRARIES clean-generic \
@@ -497,15 +490,13 @@
distclean-generic distclean-libtool distclean-tags distdir dvi \
dvi-am html html-am info info-am install \
install-@DRIVER_NAME@_drv_laLTLIBRARIES install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
+ install-data install-data-am install-exec install-exec-am \
+ install-info install-info-am install-man install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags uninstall uninstall-@DRIVER_NAME@_drv_laLTLIBRARIES \
- uninstall-am
+ uninstall-am uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/compat
+++ xserver-xorg-input-spaceorb-1.1.1/debian/compat
@@ -0,0 +1 @@
+5
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/xserver-xorg-input-spaceorb.links
+++ xserver-xorg-input-spaceorb-1.1.1/debian/xserver-xorg-input-spaceorb.links
@@ -0,0 +1 @@
+usr/share/bug/xserver-xorg-core/script usr/share/bug/xserver-xorg-input-spaceorb/script
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/xserver-xorg-input-spaceorb.manpages
+++ xserver-xorg-input-spaceorb-1.1.1/debian/xserver-xorg-input-spaceorb.manpages
@@ -0,0 +1 @@
+debian/tmp/usr/share/man/man4/*
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/rules
+++ xserver-xorg-input-spaceorb-1.1.1/debian/rules
@@ -0,0 +1,92 @@
+#!/usr/bin/make -f
+# debian/rules for the Debian xserver-xorg-input-spaceorb package.
+# Copyright © 2004 Scott James Remnant
+# Copyright © 2005 Daniel Stone
+# Copyright © 2005 David Nusinow
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+include debian/xsfbs/xsfbs.mk
+
+CFLAGS = -Wall -g
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+ INSTALL_PROGRAM += -s
+endif
+
+DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
+ confflags += --build=$(DEB_HOST_GNU_TYPE)
+else
+ confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
+endif
+
+# kbd_drv.a isn't phenomenally useful; kbd_drv.so more so
+confflags += --disable-static
+
+build: build-stamp
+build-stamp:
+ dh_testdir
+
+ test -d obj-$(DEB_BUILD_GNU_TYPE) || mkdir obj-$(DEB_BUILD_GNU_TYPE)
+ cd obj-$(DEB_BUILD_GNU_TYPE) && \
+ ../configure --prefix=/usr --mandir=\$${prefix}/share/man \
+ --infodir=\$${prefix}/share/info $(confflags) \
+ CFLAGS="$(CFLAGS)"
+ cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE)
+
+ touch build-stamp
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ rm -f config.cache config.log config.status
+ rm -f */config.cache */config.log */config.status
+ rm -f conftest* */conftest*
+ rm -rf autom4te.cache */autom4te.cache
+ rm -rf obj-*
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
+
+# Build architecture-dependent files here.
+binary-arch: build install serverabi
+ dh_testdir
+ dh_testroot
+
+ dh_installdocs
+ dh_installchangelogs ChangeLog
+ dh_install --sourcedir=debian/tmp --list-missing --exclude=spaceorb_drv.la
+ dh_installman
+ dh_link
+ dh_strip
+ dh_compress
+ dh_fixperms
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+# Build architecture-independent files here.
+binary-indep: build install
+# Nothing to do
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/watch
+++ xserver-xorg-input-spaceorb-1.1.1/debian/watch
@@ -0,0 +1,2 @@
+version=3
+http://xorg.freedesktop.org/releases/individual/driver/ xf86-input-spaceorb-(.*)\.tar\.gz
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/control
+++ xserver-xorg-input-spaceorb-1.1.1/debian/control
@@ -0,0 +1,24 @@
+Source: xserver-xorg-input-spaceorb
+Section: x11
+Priority: optional
+Maintainer: Debian X Strike Force
+Uploaders: David Nusinow , Brice Goglin
+Build-Depends: debhelper (>= 5), pkg-config, xserver-xorg-dev (>= 2:1.4), x11proto-core-dev, x11proto-randr-dev, x11proto-input-dev
+Standards-Version: 3.7.2
+XS-Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-input-spaceorb
+XS-Vcs-Browser: http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-input-spaceorb.git
+
+Package: xserver-xorg-input-spaceorb
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, ${xserver:Depends}
+Provides: ${xinpdriver:Provides}
+Replaces: xserver-xorg (<< 6.8.2-35)
+Description: X.Org X server -- SpaceOrb input driver
+ This package provides the driver for SpaceOrb input devices.
+ .
+ More information about X.Org can be found at:
+
+
+
+ .
+ This package is built from the X.org xf86-input-spaceorb driver module.
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/changelog
+++ xserver-xorg-input-spaceorb-1.1.1/debian/changelog
@@ -0,0 +1,120 @@
+xserver-xorg-input-spaceorb (1:1.1.1-2build2) jaunty; urgency=low
+
+ * Rebuild against the new xserver.
+
+ -- Timo Aaltonen Mon, 15 Dec 2008 11:48:48 +0200
+
+xserver-xorg-input-spaceorb (1:1.1.1-2build1) intrepid; urgency=low
+
+ * Rebuild against the new xserver-xorg-dev
+
+ -- Timo Aaltonen Mon, 07 Jul 2008 17:37:24 +0300
+
+xserver-xorg-input-spaceorb (1:1.1.1-2) unstable; urgency=low
+
+ * Upload to unstable
+
+ -- David Nusinow Sun, 16 Sep 2007 15:13:39 -0400
+
+xserver-xorg-input-spaceorb (1:1.1.1-1) experimental; urgency=low
+
+ * New upstream release.
+ * Add upstream URL to debian/copyright.
+ * Build against xserver 1.4.
+ * Generate the Provides field automatically.
+ * Add myself to uploaders, and remove Branden and Fabio with their
+ permission.
+
+ -- Brice Goglin Wed, 12 Sep 2007 12:18:47 +0200
+
+xserver-xorg-input-spaceorb (1:1.1.0-2) unstable; urgency=low
+
+ [ Julien Cristau ]
+ * Add link to xserver-xorg-core bug script, so that bugreports contain
+ the user's config and log files.
+ * Generate the dependency on xserver-xorg-core automatically.
+
+ [ Brice Goglin ]
+ * Install the upstream changelog.
+ * Bump Build-Depends: xserver-xorg-dev to >= 2:1.2.99.902
+ (needed to let xsfbs get access to serverminver).
+ * Add XS-Vcs-*.
+ * Add a link to www.X.org and a reference to the xf86-input-spaceorb
+ module in the long description.
+
+ -- David Nusinow Sun, 22 Apr 2007 11:40:05 -0400
+
+xserver-xorg-input-spaceorb (1:1.1.0-1) unstable; urgency=low
+
+ [ Andres Salomon ]
+ * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build;
+ idempotency fix.
+ * Run dh_install w/ --list-missing.
+
+ [ Drew Parsons ]
+ * New upstream version (X11R7.1).
+ * Standards version 3.7.2.
+ * Use debhelper 5.
+ * [Build-] Depends: xserver-xorg (>= 2:1.1.1-1).
+ * Install man pages with dh_installman.
+ * Exclude spaceorb_drv.la from dh_install.
+
+ -- Drew Parsons Fri, 13 Oct 2006 00:48:53 +1000
+
+xserver-xorg-input-spaceorb (1:1.0.0.5-2) unstable; urgency=low
+
+ * Upload to modular
+
+ -- David Nusinow Sun, 26 Mar 2006 20:25:16 -0500
+
+xserver-xorg-input-spaceorb (1:1.0.0.5-1) experimental; urgency=low
+
+ * First upload to Debian
+ * Change source package, package, and provides names to denote the
+ type of driver and that they are for xserver-xorg
+
+ -- David Nusinow Fri, 13 Jan 2006 00:34:26 -0500
+
+xserver-xorg-input-spaceorb (1:1.0.0.5-0ubuntu1) dapper; urgency=low
+
+ * New upstream release.
+ * Add provides on xserver-xorg-input.
+
+ -- Daniel Stone Wed, 4 Jan 2006 19:45:40 +1100
+
+xserver-xorg-input-spaceorb (1:1.0.0.4-0ubuntu1) dapper; urgency=low
+
+ * New upstream release.
+
+ -- Daniel Stone Mon, 19 Dec 2005 08:58:48 +1100
+
+xserver-xorg-input-spaceorb (1:1.0.0.3-0ubuntu1) dapper; urgency=low
+
+ * New upstream release.
+
+ -- Daniel Stone Mon, 12 Dec 2005 13:40:24 +1100
+
+xserver-xorg-input-spaceorb (1:1.0.0.2-0ubuntu2) dapper; urgency=low
+
+ * Add missing Build-Depends (x11proto-core-dev, x11proto-randr-dev,
+ x11proto-input-dev).
+
+ -- Daniel Stone Mon, 5 Dec 2005 12:50:27 +1100
+
+xserver-xorg-input-spaceorb (1:1.0.0.2-0ubuntu1) dapper; urgency=low
+
+ * New upstream release.
+
+ -- Daniel Stone Tue, 22 Nov 2005 13:23:33 +1100
+
+xserver-xorg-input-spaceorb (1:1.0.0.1-1) dapper; urgency=low
+
+ * New upstream release.
+
+ -- Daniel Stone Tue, 25 Oct 2005 16:57:14 +1000
+
+xserver-xorg-input-spaceorb (1:1.0.0-1) breezy; urgency=low
+
+ * First xserver-xorg-input-spaceorb release.
+
+ -- Daniel Stone Wed, 6 Jul 2005 15:48:17 +1000
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/copyright
+++ xserver-xorg-input-spaceorb-1.1.1/debian/copyright
@@ -0,0 +1,26 @@
+This package was downloaded from
+http://xorg.freedesktop.org/releases/individual/driver/
+
+Copyright (c) 1998 Metro Link Incorporated
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, cpy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+Except as contained in this notice, the name of the Metro Link shall not be
+used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from Metro Link.
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/xserver-xorg-input-spaceorb.install
+++ xserver-xorg-input-spaceorb-1.1.1/debian/xserver-xorg-input-spaceorb.install
@@ -0,0 +1 @@
+usr/lib/xorg/modules/input/*.so
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/xsfbs/xsfbs.sh
+++ xserver-xorg-input-spaceorb-1.1.1/debian/xsfbs/xsfbs.sh
@@ -0,0 +1,900 @@
+# $Id$
+
+# This is the X Strike Force shell library for X Window System package
+# maintainer scripts. It serves to define shell functions commonly used by
+# such packages, and performs some error checking necessary for proper operation
+# of those functions. By itself, it does not "do" much; the maintainer scripts
+# invoke the functions defined here to accomplish package installation and
+# removal tasks.
+
+# If you are reading this within a Debian package maintainer script (e.g.,
+# /var/lib/dpkg)info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
+# skip past this library by scanning forward in this file to the string
+# "GOBSTOPPER".
+
+SOURCE_VERSION=@SOURCE_VERSION@
+OFFICIAL_BUILD=@OFFICIAL_BUILD@
+
+# Use special abnormal exit codes so that problems with this library are more
+# easily tracked down.
+SHELL_LIB_INTERNAL_ERROR=86
+SHELL_LIB_THROWN_ERROR=74
+SHELL_LIB_USAGE_ERROR=99
+
+# old -> new variable names
+if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
+ DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
+fi
+if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
+ DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
+fi
+
+# initial sanity checks
+if [ -z "$THIS_PACKAGE" ]; then
+ cat >&2 < on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of this package.
+EOF
+ exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ -z "$THIS_SCRIPT" ]; then
+ cat >&2 < on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of the
+"$THIS_PACKAGE" package.
+EOF
+ exit $SHELL_LIB_USAGE_ERROR
+fi
+
+ARCHITECTURE="$(dpkg --print-installation-architecture)"
+
+if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
+ RECONFIGURE="true"
+else
+ RECONFIGURE=
+fi
+
+if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
+ FIRSTINST="yes"
+fi
+
+if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
+ UPGRADE="yes"
+fi
+
+trap "message;\
+ message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
+ message;\
+ exit 1" HUP INT QUIT TERM
+
+reject_nondigits () {
+ # syntax: reject_nondigits [ operand ... ]
+ #
+ # scan operands (typically shell variables whose values cannot be trusted) for
+ # characters other than decimal digits and barf if any are found
+ while [ -n "$1" ]; do
+ # does the operand contain anything but digits?
+ if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+ # can't use die(), because it wraps message() which wraps this function
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
+ "possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ shift
+ done
+}
+
+reject_whitespace () {
+ # syntax: reject_whitespace [ operand ]
+ #
+ # scan operand (typically a shell variable whose value cannot be trusted) for
+ # whitespace characters and barf if any are found
+ if [ -n "$1" ]; then
+ # does the operand contain any whitespace?
+ if expr "$1" : "[[:space:]]" > /dev/null 2>&1; then
+ # can't use die(), because I want to avoid forward references
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_whitespace() encountered" \
+ "possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ fi
+}
+
+reject_unlikely_path_chars () {
+ # syntax: reject_unlikely_path_chars [ operand ... ]
+ #
+ # scan operands (typically shell variables whose values cannot be trusted) for
+ # characters unlikely to be seen in a path and which the shell might
+ # interpret and barf if any are found
+ while [ -n "$1" ]; do
+ # does the operand contain any funny characters?
+ if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
+ # can't use die(), because I want to avoid forward references
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
+ "encountered possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ shift
+ done
+}
+
+# Query the terminal to establish a default number of columns to use for
+# displaying messages to the user. This is used only as a fallback in the
+# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
+# the script is running, and this cannot, only being calculated once.)
+DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
+if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+ DEFCOLUMNS=80
+fi
+
+message () {
+ # pretty-print messages of arbitrary length
+ reject_nondigits "$COLUMNS"
+ echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
+}
+
+observe () {
+ # syntax: observe message ...
+ #
+ # issue observational message suitable for logging someday when support for
+ # it exists in dpkg
+ if [ -n "$DEBUG_XORG_PACKAGE" ]; then
+ message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
+ fi
+}
+
+warn () {
+ # syntax: warn message ...
+ #
+ # issue warning message suitable for logging someday when support for
+ # it exists in dpkg; also send to standard error
+ message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
+}
+
+die () {
+ # syntax: die message ...
+ #
+ # exit script with error message
+ message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
+ exit $SHELL_LIB_THROWN_ERROR
+}
+
+internal_error () {
+ # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
+ message "internal error: $*"
+ if [ -n "$OFFICIAL_BUILD" ]; then
+ message "Please report a bug in the $THIS_SCRIPT script of the" \
+ "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+ "Tracking System. Include all messages above that mention the" \
+ "$THIS_PACKAGE package. Visit " \
+ " on the World Wide Web for" \
+ "instructions, read the file" \
+ "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+ "package, or install the reportbug package and use the command of" \
+ "the same name to file a report."
+ fi
+ exit $SHELL_LIB_INTERNAL_ERROR
+}
+
+usage_error () {
+ message "usage error: $*"
+ message "Please report a bug in the $THIS_SCRIPT script of the" \
+ "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+ "Tracking System. Include all messages above that mention the" \
+ "$THIS_PACKAGE package. Visit " \
+ " on the World Wide Web for" \
+ "instructions, read the file" \
+ "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+ "package, or install the reportbug package and use the command of" \
+ "the same name to file a report."
+ exit $SHELL_LIB_USAGE_ERROR
+}
+
+
+maplink () {
+ # returns what symlink should point to; i.e., what the "sane" answer is
+ # Keep this in sync with the debian/*.links files.
+ # This is only needed for symlinks to directories.
+ #
+ # XXX: Most of these look wrong in the X11R7 world and need to be fixed.
+ # If we've stopped using this function, fixing it might enable us to re-enable
+ # it again and catch more errors.
+ case "$1" in
+ /etc/X11/xkb/compiled) echo /var/lib/xkb ;;
+ /etc/X11/xkb/xkbcomp) echo /usr/X11R6/bin/xkbcomp ;;
+ /usr/X11R6/lib/X11/app-defaults) echo /etc/X11/app-defaults ;;
+ /usr/X11R6/lib/X11/fs) echo /etc/X11/fs ;;
+ /usr/X11R6/lib/X11/lbxproxy) echo /etc/X11/lbxproxy ;;
+ /usr/X11R6/lib/X11/proxymngr) echo /etc/X11/proxymngr ;;
+ /usr/X11R6/lib/X11/rstart) echo /etc/X11/rstart ;;
+ /usr/X11R6/lib/X11/twm) echo /etc/X11/twm ;;
+ /usr/X11R6/lib/X11/xdm) echo /etc/X11/xdm ;;
+ /usr/X11R6/lib/X11/xinit) echo /etc/X11/xinit ;;
+ /usr/X11R6/lib/X11/xkb) echo /etc/X11/xkb ;;
+ /usr/X11R6/lib/X11/xserver) echo /etc/X11/xserver ;;
+ /usr/X11R6/lib/X11/xsm) echo /etc/X11/xsm ;;
+ /usr/bin/X11) echo ../X11R6/bin ;;
+ /usr/bin/rstartd) echo ../X11R6/bin/rstartd ;;
+ /usr/include/X11) echo ../X11R6/include/X11 ;;
+ /usr/lib/X11) echo ../X11R6/lib/X11 ;;
+ *) internal_error "maplink() called with unknown path \"$1\"" ;;
+ esac
+}
+
+analyze_path () {
+ # given a supplied set of pathnames, break each one up by directory and do an
+ # ls -dl on each component, cumulatively; i.e.
+ # analyze_path /usr/X11R6/bin -> ls -dl /usr /usr/X11R6 /usr/X11R6/bin
+ # Thanks to Randolph Chung for this clever hack.
+
+ #local f g
+
+ while [ -n "$1" ]; do
+ reject_whitespace "$1"
+ _g=
+ message "Analyzing $1:"
+ for _f in $(echo "$1" | tr / \ ); do
+ if [ -e /$_g$_f ]; then
+ ls -dl /$_g$_f /$_g$_f.dpkg-* 2> /dev/null || true
+ _g=$_g$_f/
+ else
+ message "/$_g$_f: nonexistent; directory contents of /$_g:"
+ ls -l /$_g
+ break
+ fi
+ done
+ shift
+ done
+}
+
+find_culprits () {
+ #local f p dpkg_info_dir possible_culprits smoking_guns bad_packages package \
+ # msg
+
+ reject_whitespace "$1"
+ message "Searching for overlapping packages..."
+ _dpkg_info_dir=/var/lib/dpkg/info
+ if [ -d $_dpkg_info_dir ]; then
+ if [ "$(echo $_dpkg_info_dir/*.list)" != "$_dpkg_info_dir/*.list" ]; then
+ _possible_culprits=$(ls -1 $_dpkg_info_dir/*.list | egrep -v \
+ "(xbase-clients|x11-common|xfs|xlibs)")
+ if [ -n "$_possible_culprits" ]; then
+ _smoking_guns=$(grep -l "$1" $_possible_culprits || true)
+ if [ -n "$_smoking_guns" ]; then
+ _bad_packages=$(printf "\\n")
+ for f in $_smoking_guns; do
+ # too bad you can't nest parameter expansion voodoo
+ p=${f%*.list} # strip off the trailing ".list"
+ _package=${p##*/} # strip off the directories
+ _bad_packages=$(printf "%s\n%s" "$_bad_packages" "$_package")
+ done
+ _msg=$(cat < /dev/null 2>&1; then
+ message "The readlink command was not found. Please install version" \
+ "1.13.1 or later of the debianutils package."
+ readlink () {
+ # returns what symlink in $1 actually points to
+ perl -e '$l = shift; exit 1 unless -l $l; $r = readlink $l; exit 1 unless $r; print "$r\n"' "$1"
+ }
+fi
+
+check_symlink () {
+ # syntax: check_symlink symlink
+ #
+ # See if specified symlink points where it is supposed to. Return 0 if it
+ # does, and 1 if it does not.
+ #
+ # Primarily used by check_symlinks_and_warn() and check_symlinks_and_bomb().
+
+ #local symlink
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "check_symlink() called with wrong number of arguments;" \
+ "expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _symlink="$1"
+
+ if [ "$(maplink "$_symlink")" = "$(readlink "$_symlink")" ]; then
+ return 0
+ else
+ return 1
+ fi
+}
+
+check_symlinks_and_warn () {
+ # syntax: check_symlinks_and_warn symlink ...
+ #
+ # For each argument, check for symlink sanity, and warn if it isn't sane.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install".
+
+ #local errmsg symlink
+
+ # validate arguments
+ if [ $# -lt 1 ]; then
+ usage_error "check_symlinks_and_warn() called with wrong number of" \
+ "arguments; expected at least 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ while [ -n "$1" ]; do
+ _symlink="$1"
+ if [ -L "$_symlink" ]; then
+ if ! check_symlink "$_symlink"; then
+ observe "$_symlink symbolic link points to wrong location" \
+ "$(readlink "$_symlink"); removing"
+ rm "$_symlink"
+ fi
+ elif [ -e "$_symlink" ]; then
+ _errmsg="$_symlink exists and is not a symbolic link; this package cannot"
+ _errmsg="$_errmsg be installed until this"
+ if [ -f "$_symlink" ]; then
+ _errmsg="$_errmsg file"
+ elif [ -d "$_symlink" ]; then
+ _errmsg="$_errmsg directory"
+ else
+ _errmsg="$_errmsg thing"
+ fi
+ _errmsg="$_errmsg is removed"
+ die "$_errmsg"
+ fi
+ shift
+ done
+}
+
+check_symlinks_and_bomb () {
+ # syntax: check_symlinks_and_bomb symlink ...
+ #
+ # For each argument, check for symlink sanity, and bomb if it isn't sane.
+ #
+ # Call this function from a postinst script.
+
+ #local problem symlink
+
+ # validate arguments
+ if [ $# -lt 1 ]; then
+ usage_error "check_symlinks_and_bomb() called with wrong number of"
+ "arguments; expected at least 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ while [ -n "$1" ]; do
+ _problem=
+ _symlink="$1"
+ if [ -L "$_symlink" ]; then
+ if ! check_symlink "$_symlink"; then
+ _problem=yes
+ warn "$_symlink symbolic link points to wrong location" \
+ "$(readlink "$_symlink")"
+ fi
+ elif [ -e "$_symlink" ]; then
+ _problem=yes
+ warn "$_symlink is not a symbolic link"
+ else
+ _problem=yes
+ warn "$_symlink symbolic link does not exist"
+ fi
+ if [ -n "$_problem" ]; then
+ analyze_path "$_symlink" "$(readlink "$_symlink")"
+ find_culprits "$_symlink"
+ die "bad symbolic links on system"
+ fi
+ shift
+ done
+}
+
+font_update () {
+ # run $UPDATECMDS in $FONTDIRS
+
+ #local dir cmd shortcmd x_font_dir_prefix
+
+ _x_font_dir_prefix="/usr/share/fonts/X11"
+
+ if [ -z "$UPDATECMDS" ]; then
+ usage_error "font_update() called but \$UPDATECMDS not set"
+ fi
+ if [ -z "$FONTDIRS" ]; then
+ usage_error "font_update() called but \$FONTDIRS not set"
+ fi
+
+ reject_unlikely_path_chars "$UPDATECMDS"
+ reject_unlikely_path_chars "$FONTDIRS"
+
+ for _dir in $FONTDIRS; do
+ if [ -d "$_x_font_dir_prefix/$_dir" ]; then
+ for _cmd in $UPDATECMDS; do
+ if which "$_cmd" > /dev/null 2>&1; then
+ _shortcmd=${_cmd##*/}
+ observe "running $_shortcmd in $_dir font directory"
+ _cmd_opts=
+ if [ "$_shortcmd" = "update-fonts-alias" ]; then
+ _cmd_opts=--x11r7-layout
+ fi
+ if [ "$_shortcmd" = "update-fonts-dir" ]; then
+ _cmd_opts=--x11r7-layout
+ fi
+ if [ "$_shortcmd" = "update-fonts-scale" ]; then
+ _cmd_opts=--x11r7-layout
+ fi
+ $_cmd $_cmd_opts $_dir || warn "$_cmd $_cmd_opts $_dir" \
+ "failed; font directory data may not" \
+ "be up to date"
+ else
+ warn "$_cmd not found; not updating corresponding $_dir font" \
+ "directory data"
+ fi
+ done
+ else
+ warn "$_dir is not a directory; not updating font directory data"
+ fi
+ done
+}
+
+remove_conffile_prepare () {
+ # syntax: remove_conffile_prepare filename official_md5sum ...
+ #
+ # Check a conffile "filename" against a list of canonical MD5 checksums.
+ # If the file's current MD5 checksum matches one of the "official_md5sum"
+ # operands provided, then prepare the conffile for removal from the system.
+ # We defer actual deletion until the package is configured so that we can
+ # roll this operation back if package installation fails.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install" and verify $2 to ensure the package is being upgraded from a
+ # version (or installed over a version removed-but-not-purged) prior to the
+ # one in which the conffile was obsoleted.
+
+ #local conffile current_checksum
+
+ # validate arguments
+ if [ $# -lt 2 ]; then
+ usage_error "remove_conffile_prepare() called with wrong number of" \
+ "arguments; expected at least 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _conffile="$1"
+ shift
+
+ # does the _conffile even exist?
+ if [ -e "$_conffile" ]; then
+ # calculate its checksum
+ _current_checksum=$(md5sum < "$_conffile" | sed 's/[[:space:]].*//')
+ # compare it to each supplied checksum
+ while [ -n "$1" ]; do
+ if [ "$_current_checksum" = "$1" ]; then
+ # we found a match; move the confffile and stop looking
+ observe "preparing obsolete conffile $_conffile for removal"
+ mv "$_conffile" "$_conffile.$THIS_PACKAGE-tmp"
+ break
+ fi
+ shift
+ done
+ fi
+}
+
+remove_conffile_commit () {
+ # syntax: remove_conffile_commit filename
+ #
+ # Complete the removal of a conffile "filename" that has become obsolete.
+ #
+ # Call this function from a postinst script after having used
+ # remove_conffile_prepare() in the preinst.
+
+ #local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "remove_conffile_commit() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _conffile="$1"
+
+ # if the temporary file created by remove_conffile_prepare() exists, remove it
+ if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "committing removal of obsolete conffile $_conffile"
+ rm "$_conffile.$THIS_PACKAGE-tmp"
+ fi
+}
+
+remove_conffile_rollback () {
+ # syntax: remove_conffile_rollback filename
+ #
+ # Roll back the removal of a conffile "filename".
+ #
+ # Call this function from a postrm script in the event $1 is "abort-upgrade"
+ # or "abort-install" is after having used remove_conffile_prepare() in the
+ # preinst.
+
+ #local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "remove_conffile_rollback() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _conffile="$1"
+
+ # if the temporary file created by remove_conffile_prepare() exists, move it
+ # back
+ if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "rolling back removal of obsolete conffile $_conffile"
+ mv "$_conffile.$THIS_PACKAGE-tmp" "$_conffile"
+ fi
+}
+
+replace_conffile_with_symlink_prepare () {
+ # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
+ # official_md5sum ...
+ #
+ # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
+ # If the file's current MD5 checksum matches one of the "official_md5sum"
+ # operands provided, then prepare the conffile for removal from the system.
+ # We defer actual deletion until the package is configured so that we can
+ # roll this operation back if package installation fails. Otherwise copy it
+ # to newfilename and let dpkg handle it through conffiles mechanism.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install" and verify $2 to ensure the package is being upgraded from a
+ # version (or installed over a version removed-but-not-purged) prior to the
+ # one in which the conffile was obsoleted.
+
+ #local conffile current_checksum
+
+ # validate arguments
+ if [ $# -lt 3 ]; then
+ usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
+ " number of arguments; expected at least 3, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _oldconffile="$1"
+ shift
+ _newconffile="$1"
+ shift
+
+ remove_conffile_prepare "$_oldconffile" "$@"
+ # If $_oldconffile still exists, then md5sums didn't match.
+ # Copy it to new one.
+ if [ -f "$_oldconffile" ]; then
+ cp "$_oldconffile" "$_newconffile"
+ fi
+
+}
+
+replace_conffile_with_symlink_commit () {
+ # syntax: replace_conffile_with_symlink_commit oldfilename
+ #
+ # Complete the removal of a conffile "oldfilename" that has been
+ # replaced by a symlink.
+ #
+ # Call this function from a postinst script after having used
+ # replace_conffile_with_symlink_prepare() in the preinst.
+
+ #local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "replace_conffile_with_symlink_commit() called with wrong" \
+ "number of arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _conffile="$1"
+
+ remove_conffile_commit "$_conffile"
+}
+
+replace_conffile_with_symlink_rollback () {
+ # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename
+ #
+ # Roll back the replacing of a conffile "oldfilename" with symlink to
+ # "newfilename".
+ #
+ # Call this function from a postrm script in the event $1 is "abort-upgrade"
+ # or "abort-install" and verify $2 to ensure the package failed to upgrade
+ # from a version (or install over a version removed-but-not-purged) prior
+ # to the one in which the conffile was obsoleted.
+ # You should have used replace_conffile_with_symlink_prepare() in the
+ # preinst.
+
+ #local conffile
+
+ # validate arguments
+ if [ $# -ne 2 ]; then
+ usage_error "replace_conffile_with_symlink_rollback() called with wrong" \
+ "number of arguments; expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _oldconffile="$1"
+ _newconffile="$2"
+
+ remove_conffile_rollback "$_oldconffile"
+ if [ -f "$_newconffile" ]; then
+ rm "$_newconffile"
+ fi
+}
+
+run () {
+ # syntax: run command [ argument ... ]
+ #
+ # Run specified command with optional arguments and report its exit status.
+ # Useful for commands whose exit status may be nonzero, but still acceptable,
+ # or commands whose failure is not fatal to us.
+ #
+ # NOTE: Do *not* use this function with db_get or db_metaget commands; in
+ # those cases the return value of the debconf command *must* be checked
+ # before the string returned by debconf is used for anything.
+
+ #local retval
+
+ # validate arguments
+ if [ $# -lt 1 ]; then
+ usage_error "run() called with wrong number of arguments; expected at" \
+ "least 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ "$@" || _retval=$?
+
+ if [ ${_retval:-0} -ne 0 ]; then
+ observe "command \"$*\" exited with status $_retval"
+ fi
+}
+
+register_x_lib_dir_with_ld_so () {
+ # syntax: register_x_lib_dir_with_ld_so
+ #
+ # Configure the dynamic loader ld.so to search /usr/X11R6/lib for shared
+ # libraries.
+ #
+ # Call this function from the postinst script of a package that places a
+ # shared library in /usr/X11R6/lib, before invoking ldconfig.
+
+ #local dir ldsoconf
+
+ _dir="/usr/X11R6/lib"
+ _ldsoconf="/etc/ld.so.conf"
+
+ # is the line not already present?
+ if ! fgrep -qsx "$_dir" "$_ldsoconf"; then
+ observe "adding $_dir directory to $_ldsoconf"
+ echo "$_dir" >> "$_ldsoconf"
+ fi
+}
+
+deregister_x_lib_dir_with_ld_so () {
+ # syntax: deregister_x_lib_dir_with_ld_so
+ #
+ # Configure dynamic loader ld.so to not search /usr/X11R6/lib for shared
+ # libraries, if and only if no shared libaries remain there.
+ #
+ # Call this function from the postrm script of a package that places a shared
+ # library in /usr/X11R6/lib, in the event "$1" is "remove", and before
+ # invoking ldconfig.
+
+ #local dir ldsoconf fgrep_status cmp_status
+
+ _dir="/usr/X11R6/lib"
+ _ldsoconf="/etc/ld.so.conf"
+
+ # is the line present?
+ if fgrep -qsx "$_dir" "$_ldsoconf"; then
+ # are there any shared objects in the directory?
+ if [ "$(echo "$_dir"/lib*.so.*.*)" = "$_dir/lib*.so.*.*" ]; then
+ # glob expansion produced nothing, so no shared libraries are present
+ observe "removing $_dir directory from $_ldsoconf"
+ # rewrite the file (very carefully)
+ set +e
+ fgrep -svx "$_dir" "$_ldsoconf" > "$_ldsoconf.dpkg-tmp"
+ _fgrep_status=$?
+ set -e
+ case $_fgrep_status in
+ 0|1) ;; # we don't actually care if any lines matched or not
+ *) die "error reading \"$_ldsoconf\"; fgrep exited with status" \
+ "$_fgrep_status" ;;
+ esac
+ set +e
+ cmp -s "$_ldsoconf.dpkg-tmp" "$_ldsoconf"
+ _cmp_status=$?
+ set -e
+ case $_cmp_status in
+ 0) rm "$_ldsoconf.dpkg-tmp" ;; # files are identical
+ 1) mv "$_ldsoconf.dpkg-tmp" "$_ldsoconf" ;; # files differ
+ *) die "error comparing \"$_ldsoconf.dpkg-tmp\" to \"$_ldsoconf\";" \
+ "cmp exited with status $_cmp_status" ;;
+ esac
+ fi
+ fi
+}
+
+make_symlink_sane () {
+ # syntax: make_symlink_sane symlink target
+ #
+ # Ensure that the symbolic link symlink exists, and points to target.
+ #
+ # If symlink does not exist, create it and point it at target.
+ #
+ # If symlink exists but is not a symbolic link, back it up.
+ #
+ # If symlink exists, is a symbolic link, but points to the wrong location, fix
+ # it.
+ #
+ # If symlink exists, is a symbolic link, and already points to target, do
+ # nothing.
+ #
+ # This function wouldn't be needed if ln had an -I, --idempotent option.
+
+ # Validate arguments.
+ if [ $# -ne 2 ]; then
+ usage_error "make_symlink_sane() called with wrong number of arguments;" \
+ "expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ # We could just use the positional parameters as-is, but that makes things
+ # harder to follow.
+ #local symlink target
+
+ _symlink="$1"
+ _target="$2"
+
+ if [ -L "$_symlink" ] && [ "$(readlink "$_symlink")" = "$_target" ]; then
+ observe "link from $_symlink to $_target already exists"
+ else
+ observe "creating symbolic link from $_symlink to $_target"
+ mkdir -p "${_target%/*}" "${_symlink%/*}"
+ ln -s -b -S ".dpkg-old" "$_target" "$_symlink"
+ fi
+}
+
+migrate_dir_to_symlink () {
+ # syntax: migrate_dir_to_symlink old_location new_location
+ #
+ # Per Debian Policy section 6.5.4, "A directory will never be replaced by a
+ # symbolic link to a directory or vice versa; instead, the existing state
+ # (symlink or not) will be left alone and dpkg will follow the symlink if
+ # there is one."
+ #
+ # We have to do it ourselves.
+ #
+ # This function moves the contents of old_location, a directory, into
+ # new_location, a directory, then makes old_location a symbolic link to
+ # new_location.
+ #
+ # old_location need not exist, but if it does, it must be a directory (or a
+ # symlink to a directory). If it is not, it is backed up. If new_location
+ # exists already and is not a directory, it is backed up.
+ #
+ # This function should be called from a package's preinst so that other
+ # packages unpacked after this one --- but before this package's postinst runs
+ # --- are unpacked into new_location even if their payloads contain
+ # old_location filespecs.
+
+ # Validate arguments.
+ if [ $# -ne 2 ]; then
+ usage_error "migrate_dir_to_symlink() called with wrong number of"
+ "arguments; expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ # We could just use the positional parameters as-is, but that makes things
+ # harder to follow.
+ local _new _old
+
+ _old="$1"
+ _new="$2"
+
+ # Is old location a symlink?
+ if [ -L "$_old" ]; then
+ # Does it already point to new location?
+ if [ "$(readlink "$_old")" = "$_new" ]; then
+ # Nothing to do; migration has already been done.
+ observe "migration of $_old to $_new already done"
+ return 0
+ else
+ # Back it up.
+ warn "backing up symbolic link $_old as $_old.dpkg-old"
+ mv -b "$_old" "$_old.dpkg-old"
+ fi
+ fi
+
+ # Does old location exist, but is not a directory?
+ if [ -e "$_old" ] && ! [ -d "$_old" ]; then
+ # Back it up.
+ warn "backing up non-directory $_old as $_old.dpkg-old"
+ mv -b "$_old" "$_old.dpkg-old"
+ fi
+
+ observe "migrating $_old to $_new"
+
+ # Is new location a symlink?
+ if [ -L "$_new" ]; then
+ # Does it point the wrong way, i.e., back to where we're migrating from?
+ if [ "$(readlink "$_new")" = "$_old" ]; then
+ # Get rid of it.
+ observe "removing symbolic link $_new which points to $_old"
+ rm "$_new"
+ else
+ # Back it up.
+ warn "backing up symbolic link $_new as $_new.dpkg-old"
+ mv -b "$_new" "$_new.dpkg-old"
+ fi
+ fi
+
+ # Does new location exist, but is not a directory?
+ if [ -e "$_new" ] && ! [ -d "$_new" ]; then
+ warn "backing up non-directory $_new as $_new.dpkg-old"
+ mv -b "$_new" "$_new.dpkg-old"
+ fi
+
+ # Create new directory if it does not yet exist.
+ if ! [ -e "$_new" ]; then
+ observe "creating $_new"
+ mkdir -p "$_new"
+ fi
+
+ # Copy files in old location to new location. Back up any filenames that
+ # already exist in the new location with the extension ".dpkg-old".
+ observe "copying files from $_old to $_new"
+ if ! (cd "$_old" && cp -a -b -S ".dpkg-old" . "$_new"); then
+ die "error(s) encountered while copying files from $_old to $_new"
+ fi
+
+ # Remove files at old location.
+ observe "removing $_old"
+ rm -r "$_old"
+
+ # Create symlink from old location to new location.
+ make_symlink_sane "$_old" "$_new"
+}
+
+# vim:set ai et sw=2 ts=2 tw=80:
+
+# GOBSTOPPER: The X Strike Force shell library ends here.
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/xsfbs/xsfbs.mk
+++ xserver-xorg-input-spaceorb-1.1.1/debian/xsfbs/xsfbs.mk
@@ -0,0 +1,388 @@
+#!/usr/bin/make -f
+
+# Debian X Strike Force Build System (XSFBS): Make portion
+
+# Copyright 1996 Stephen Early
+# Copyright 1997 Mark Eichin
+# Copyright 1998-2005, 2007 Branden Robinson
+# Copyright 2005 David Nusinow
+#
+# Licensed under the GNU General Public License, version 2. See the file
+# /usr/share/common-licenses/GPL or .
+
+# Originally by Stephen Early
+# Modified by Mark W. Eichin
+# Modified by Adam Heath
+# Modified by Branden Robinson
+# Modified by Fabio Massimo Di Nitto
+# Modified by David Nusinow
+# Acknowledgements to Manoj Srivastava.
+
+# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
+export DH_OPTIONS
+
+# force quilt to not use ~/.quiltrc
+QUILT = quilt --quiltrc /dev/null
+# force QUILT_PATCHES to the default in case it is exported in the environment
+QUILT_PATCHES = patches/
+
+# Set up parameters for the upstream build environment.
+
+# Determine (source) package name from Debian changelog.
+SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
+ | grep '^Source:' | awk '{print $$2}')
+
+# Determine package version from Debian changelog.
+SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
+ | grep '^Version:' | awk '{print $$2}')
+
+# Determine upstream version number.
+UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
+
+# Determine the source version without the epoch for make-orig-tar-gz
+NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
+
+# Figure out who's building this package.
+BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
+
+# Find out if this is an official build; an official build has nothing but
+# digits, dots, and/or the strings "woody" or "sarge" in the Debian part of the
+# version number. Anything else indicates an unofficial build.
+OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
+
+# Set up parameters for the Debian build environment.
+
+# Determine our architecture.
+BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
+# Work around some old-time dpkg braindamage.
+BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
+# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
+ifdef DEB_HOST_ARCH
+ ARCH:=$(DEB_HOST_ARCH)
+else
+ # dpkg-cross sets the ARCH environment variable; if set, use it.
+ ifdef ARCH
+ ARCH:=$(ARCH)
+ else
+ ARCH:=$(BUILD_ARCH)
+ endif
+endif
+
+# $(STAMP_DIR) houses stamp files for complex targets.
+STAMP_DIR:=stampdir
+
+# $(SOURCE_DIR) houses one or more source trees.
+SOURCE_DIR:=build-tree
+
+# $(SOURCE_TREE) is the location of the source tree to be compiled. If there
+# is more than one, others are found using this name plus a suffix to indicate
+# the purpose of the additional tree (e.g., $(SOURCE_TREE)-custom). The
+# "setup" target is responsible for creating such trees.
+#SOURCE_TREE:=$(SOURCE_DIR)/xc
+#FIXME We need to define this in our debian/rules file
+
+# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
+# their files.
+DEBTREEDIR:=$(CURDIR)/debian/tmp
+
+# All "important" targets have four lines:
+# 1) A target name that is invoked by a package-building tool or the user.
+# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
+# 2) A line delcaring 1) as a phony target (".PHONY:").
+# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
+# depend on other targets.
+# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
+# "$(STAMP_DIR)/" prefix is omitted.
+#
+# This indirection is needed so that the "stamp" files that signify when a rule
+# is done can be located in a separate "stampdir". Recall that make has no way
+# to know when a goal has been met for a phony target (like "build" or
+# "install").
+#
+# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
+# so that the target will not be run again. Removing the file will make Make
+# run the target over.
+
+# All phony targets should be declared as dependencies of .PHONY, even if they
+# do not have "($STAMP_DIR)/"-prefixed counterparts.
+
+# Define a harmless default rule to keep things from going nuts by accident.
+.PHONY: default
+default:
+
+# Set up the $(STAMP_DIR) directory.
+.PHONY: stampdir
+stampdir_targets+=stampdir
+stampdir: $(STAMP_DIR)/stampdir
+$(STAMP_DIR)/stampdir:
+ mkdir $(STAMP_DIR)
+ >$@
+
+# Set up the package build directory as quilt expects to find it.
+.PHONY: prepare
+stampdir_targets+=prepare
+prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare $(STAMP_DIR)/patches $(STAMP_DIR)/log
+$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir
+ if [ ! -e $(STAMP_DIR)/patches ]; then \
+ mkdir $(STAMP_DIR)/patches; \
+ ln -s $(STAMP_DIR)/patches .pc; \
+ echo 2 >$(STAMP_DIR)/patches/.version; \
+ fi; \
+ if [ ! -e $(STAMP_DIR)/log ]; then \
+ mkdir $(STAMP_DIR)/log; \
+ fi; \
+ if [ -e debian/patches ] && [ ! -e patches ]; then \
+ ln -s debian/patches patches; \
+ fi; \
+ >$@
+
+# Apply all patches to the upstream source.
+.PHONY: patch
+stampdir_targets+=patch
+patch: $(STAMP_DIR)/patch
+$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
+ if ! [ `which quilt` ]; then \
+ echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
+ exit 1; \
+ fi; \
+ if $(QUILT) next >/dev/null 2>&1; then \
+ echo -n "Applying patches..."; \
+ if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
+ cat $(STAMP_DIR)/log/patch; \
+ echo "successful."; \
+ else \
+ cat $(STAMP_DIR)/log/patch; \
+ echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
+ exit 1; \
+ fi; \
+ else \
+ echo "No patches to apply"; \
+ fi; \
+ >$@
+
+# Revert all patches to the upstream source.
+.PHONY: unpatch
+unpatch:
+ rm -f $(STAMP_DIR)/patch
+ @echo -n "Unapplying patches..."; \
+ if [ -e $(STAMP_DIR)/patches/applied-patches ]; then \
+ if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
+ cat $(STAMP_DIR)/log/unpatch; \
+ echo "successful."; \
+ else \
+ cat $(STAMP_DIR)/log/unpatch; \
+ echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
+ exit 1; \
+ fi; \
+ else \
+ echo "nothing to do."; \
+ fi
+
+# Clean the generated maintainer scripts.
+.PHONY: cleanscripts
+cleanscripts:
+ rm -f $(STAMP_DIR)/genscripts
+ rm -f debian/*.config \
+ debian/*.postinst \
+ debian/*.postrm \
+ debian/*.preinst \
+ debian/*.prerm
+
+# Clean the package build tree.
+.PHONY: xsfclean
+xsfclean: cleanscripts unpatch
+ dh_testdir
+ rm -f .pc patches
+ rm -rf $(STAMP_DIR) $(SOURCE_DIR)
+ rm -rf imports
+ dh_clean debian/shlibs.local \
+ debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new \
+ debian/po/pothead
+
+# Generate the debconf templates POT file header.
+debian/po/pothead: debian/po/pothead.in
+ sed -e 's/SOURCE_VERSION/$(SOURCE_VERSION)/' \
+ -e 's/DATE/$(shell date "+%F %X%z"/)' <$< >$@
+
+# Update POT and PO files.
+.PHONY: updatepo
+updatepo: debian/po/pothead
+ debian/scripts/debconf-updatepo --pot-header=pothead --verbose
+
+# Use the MANIFEST files to determine whether we're shipping everything we
+# expect to ship, and not shipping anything we don't expect to ship.
+.PHONY: check-manifest
+stampdir_targets+=check-manifest
+check-manifest: $(STAMP_DIR)/check-manifest
+$(STAMP_DIR)/check-manifest: $(STAMP_DIR)/install
+ # Compare manifests.
+ (cd debian/tmp && find -type f | LC_ALL=C sort | cut -c3-) \
+ >debian/MANIFEST.$(ARCH).new
+ # Construct MANIFEST files from MANIFEST.$(ARCH).in and
+ # MANIFEST.$(ARCH).all or MANIFEST.all.
+ if expr "$(findstring -DBuildFonts=NO,$(IMAKE_DEFINES))" \
+ : "-DBuildFonts=NO" >/dev/null 2>&1; then \
+ LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in >debian/MANIFEST.$(ARCH); \
+ else \
+ if [ -e debian/MANIFEST.$(ARCH).all ]; then \
+ LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in debian/MANIFEST.$(ARCH).all >debian/MANIFEST.$(ARCH); \
+ else \
+ LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in debian/MANIFEST.all >debian/MANIFEST.$(ARCH); \
+ fi; \
+ fi
+ # Confirm that the installed file list has not changed.
+ if [ -e debian/MANIFEST.$(ARCH) ]; then \
+ if ! cmp -s debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new; then \
+ diff -U 0 debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new || DIFFSTATUS=$$?; \
+ case $${DIFFSTATUS:-0} in \
+ 0) ;; \
+ 1) if [ -n "$$IGNORE_MANIFEST_CHANGES" ]; then \
+ echo 'MANIFEST check failed; ignoring problem because \$$IGNORE_MANIFEST_CHANGES set' >&2; \
+ echo 'Please ensure that the package maintainer has an up-to-date version of the' >&2; \
+ echo 'MANIFEST.$(ARCH).in file.' >&2; \
+ else \
+ echo 'MANIFEST check failed; please see debian/README' >&2; \
+ exit 1; \
+ fi; \
+ ;; \
+ *) echo "diff reported unexpected exit status $$DIFFSTATUS when performing MANIFEST check" >&2; \
+ exit 1; \
+ ;; \
+ esac; \
+ fi; \
+ fi
+ >$@
+
+# Because we build (and install) different files depending on whether or not
+# any architecture-independent packages are being created, the list of files we
+# expect to see will differ; see the discussion of the "build" target above.
+.PHONY: check-manifest-arch check-manifest-indep
+check-manifest-arch: IMAKE_DEFINES+= -DBuildSpecsDocs=NO -DBuildFonts=NO -DInstallHardcopyDocs=NO
+check-manifest-arch: check-manifest
+check-manifest-indep: check-manifest
+
+# Remove files from the upstream source tree that we don't need, or which have
+# licensing problems. It must be run before creating the .orig.tar.gz.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: prune-upstream-tree
+prune-upstream-tree:
+ # Ensure we're in the correct directory.
+ dh_testdir
+ grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
+
+# Change to what should be the correct directory, ensure it is, and if
+# so, create the .orig.tar.gz file. Exclude the debian directory and its
+# contents, and any .svn directories and their contents (so that we can safely
+# build an .orig.tar.gz from SVN checkout, not just an export).
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+#
+# This rule *IS* the recommended method for creating a new .orig.tar.gz file,
+# for the rare situations when one is needed.
+.PHONY: make-orig-tar-gz
+make-orig-tar-gz: clean prune-upstream-tree
+ ( cd .. \
+ && if [ $(shell basename $(CURDIR)) != $(SOURCE_NAME)-$(NO_EPOCH_VER) ]; then \
+ echo "Our current working directory has the wrong name. Renaming..." >&2; \
+ mv $(CURDIR) $(SOURCE_NAME)-$(NO_EPOCH_VER); \
+ fi; \
+ tar --exclude=debian --exclude=debian/* \
+ --exclude=.svn --exclude=.svn/* \
+ -cf - $(SOURCE_NAME)-$(NO_EPOCH_VER) \
+ | gzip -9 >$(SOURCE_NAME)_$(NO_EPOCH_VER).orig.tar.gz; \
+ )
+
+# Verify that there are no offsets or fuzz in the patches we apply.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: patch-audit
+patch-audit: prepare unpatch
+ @echo -n "Auditing patches..."; \
+ >$(STAMP_DIR)/log/patch; \
+ FUZZY=; \
+ while [ -n "$$($(QUILT) next)" ]; do \
+ RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
+ case "$$RESULT" in \
+ succeeded) \
+ echo "fuzzy patch: $$($(QUILT) top)" \
+ | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
+ FUZZY=yes; \
+ ;; \
+ FAILED) \
+ echo "broken patch: $$($(QUILT) next)" \
+ | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
+ exit 1; \
+ ;; \
+ esac; \
+ done; \
+ if [ -n "$$FUZZY" ]; then \
+ echo "there were fuzzy patches; please fix."; \
+ exit 1; \
+ else \
+ echo "done."; \
+ fi
+
+# Generate the maintainer scripts.
+.PHONY: genscripts
+stampdir_targets+=genscripts
+genscripts: $(STAMP_DIR)/genscripts
+$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
+ for FILE in debian/*.config.in \
+ debian/*.postinst.in \
+ debian/*.postrm.in \
+ debian/*.preinst.in \
+ debian/*.prerm.in; do \
+ if [ -e "$$FILE" ]; then \
+ MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
+ sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
+ | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
+ cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
+ sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
+ | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
+ sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
+ -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
+ -e 's/@DEFAULT_DCRESOLUTIONS@/$(DEFAULT_DCRESOLUTIONS)/' \
+ <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
+ rm $$MAINTSCRIPT.tmp; \
+ fi; \
+ done
+ # Validate syntax of generated shell scripts.
+ #sh debian/scripts/validate-posix-sh debian/*.config \
+ # debian/*.postinst \
+ # debian/*.postrm \
+ # debian/*.preinst \
+ # debian/*.prerm
+ >$@
+
+# Generate the shlibs.local file.
+debian/shlibs.local:
+ cat debian/*.shlibs >$@
+
+SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null)
+VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
+INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
+SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS))
+VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI)
+INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI)
+ifeq ($(PACKAGE),)
+PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
+endif
+
+.PHONY: serverabi
+serverabi:
+ifeq ($(SERVERMINVERS),)
+ @echo error: xserver-xorg-dev needs to be installed
+ @exit 1
+else
+ echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars
+ echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+ echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+endif
+
+include debian/xsfbs/xsfbs-autoreconf.mk
+
+# vim:set noet ai sts=8 sw=8 tw=0:
--- xserver-xorg-input-spaceorb-1.1.1.orig/debian/xsfbs/xsfbs-autoreconf.mk
+++ xserver-xorg-input-spaceorb-1.1.1/debian/xsfbs/xsfbs-autoreconf.mk
@@ -0,0 +1,150 @@
+#!/usr/bin/make -f
+# $Id$
+
+# Automagical conversion of autoreconf results into quilt patches.
+
+# Copyright 2006 Eugene Konev
+#
+# Licensed under the GNU General Public License, version 2. See the file
+# /usr/share/common-licenses/GPL or .
+
+# The idea behind this is storing changes produced by autoreconf as a
+# separate patch on quilt stack (on top of stack actually).
+# The only usable target here is 'autoreconf`. Other targets are not
+# supposed to be called directly. DO NOT invoke them, unless you know what
+# you are doing.
+# The autoreconf target will check if files with names in $(RECONF_CHECKFILES)
+# were changed during patching (from upstream version or from previously
+# autoreconfed version) and call actual autoreconfing if they were.
+# The actual autoreconfing target (doautoreconf) WILL FAIL after
+# calling autoreconf and pushing changes into quilt stack by design. It
+# should never be invoked by automatic build process.
+# The proposed use is adding autoreconf into clean's prerequisites before
+# xsfclean like:
+# - clean: xsfclean
+# + clean: autoreconf xsfclean
+# This will ensure it is called when you build package with dpkg-buildpackage.
+
+# This dir will be used for producing diff of autoreconfed tree
+RECONF_DIR := xsfautoreconf
+
+# This files will be checked for changes
+RECONF_CHECKFILES += configure.ac Makefile.am
+
+# This files will not be hardlinked but copied
+RECONF_NOLINKFILES += aclocal.m4
+
+# This files/dirs will be pruned after autoreconf run
+RECONF_PRUNEFILES += autom4te.cache config.h.in~ aclocal.m4~
+
+# Internal target. Never invoke directly.
+stampdir_target+=check.md5sum
+$(STAMP_DIR)/check.md5sum:
+ dh_testdir
+ $(MAKE) -f debian/rules prepare
+ for F in $(RECONF_CHECKFILES); do \
+ find . -wholename ./$(STAMP_DIR) -prune -o -name $$F -print | \
+ LC_ALL=C sort | xargs --no-run-if-empty md5sum >>$@; \
+ done
+
+# Internal target. Never invoke directly.
+$(STAMP_DIR)/clean.md5sum:
+ dh_testdir
+ $(MAKE) -f debian/rules unpatch
+ rm -f $(STAMP_DIR)/check.md5sum
+ $(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum
+ mv $(STAMP_DIR)/check.md5sum $@
+
+# Internal target. Never invoke directly.
+debian/patches/patched.md5sum:
+ dh_testdir
+ [ -f $(STAMP_DIR)/clean.md5sum ] || \
+ $(MAKE) -f debian/rules $(STAMP_DIR)/clean.md5sum
+
+ $(MAKE) -f debian/rules patch
+ rm -f $(STAMP_DIR)/check.md5sum
+ $(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum
+ if ! diff $(STAMP_DIR)/clean.md5sum \
+ $(STAMP_DIR)/check.md5sum > /dev/null; then \
+ $(MAKE) -f debian/rules doautoreconf; \
+ else \
+ mv $(STAMP_DIR)/check.md5sum $@; \
+ fi
+
+# Internal target. Never invoke directly.
+,PHONY: doautoreconf
+doautoreconf: patch
+ quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1 || true
+ if quilt applied | grep ^autoreconf.diff$$ > /dev/null; then \
+ quilt pop -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \
+ quilt rename -p autoreconf.diff autoreconf-old.diff \
+ >>$(STAMP_DIR)/log/autoreconf 2>&1; \
+ quilt delete autoreconf-old.diff >>$(STAMP_DIR)/log/autoreconf 2>&1; \
+ quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \
+ fi
+
+ if [ -e $(RECONF_DIR) ]; then \
+ echo "ERROR: $(RECONF_DIR) already exists. Cleanup by hand"; \
+ exit 1; \
+ fi
+
+ mkdir -p $(RECONF_DIR)/before
+ find . -maxdepth 1 -mindepth 1 ! -wholename ./$(RECONF_DIR) \
+ -a ! -wholename ./debian -a ! -wholename ./patches \
+ -a ! -wholename ./.pc -a ! -wholename ./$(STAMP_DIR) | \
+ xargs -i{} cp -al {} $(RECONF_DIR)/before/
+
+ for F in $(RECONF_PRUNEFILES); do \
+ find $(RECONF_DIR)/before -name $$F -print | \
+ xargs --no-run-if-empty rm -r; \
+ done
+
+ cp -al $(RECONF_DIR)/before $(RECONF_DIR)/after
+
+ for F in $(RECONF_NOLINKFILES); do \
+ find . -wholename ./$(RECONF_DIR) -prune -o -wholename ./debian \
+ -prune -o -wholename ./$(STAMP_DIR) -prune -o -name $$F \
+ -print | \
+ xargs --no-run-if-empty -i{} cp --remove-destination {} \
+ $(RECONF_DIR)/after/{}; \
+ done
+
+ cd $(RECONF_DIR)/after && autoreconf -v --install && \
+ for F in $(RECONF_PRUNEFILES); do \
+ find . -name $$F -print | \
+ xargs --no-run-if-empty rm -r; \
+ done
+
+ cd $(RECONF_DIR) && diff -Nru before after > autoreconf.diff || true
+
+ quilt import $(RECONF_DIR)/autoreconf.diff \
+ >>$(STAMP_DIR)/log/autoreconf 2>&1
+
+ mv $(STAMP_DIR)/check.md5sum debian/patches/patched.md5sum
+
+ rm -r $(RECONF_DIR) && rm -f patches/autoreconf-old.diff
+
+ @echo
+ @echo "****************************************************************"
+ @echo " This target is made to fail INTENTIONALLY. It should NEVER "
+ @echo " be invoked during automatic builds. "
+ @echo
+ @echo " This target was invoked because you added/removed/changed "
+ @echo " patches which modify either configure.ac or Makefile.am and, "
+ @echo " thus, require autoreconf run. And all autoreconfing should "
+ @echo " happen before uploading. "
+ @echo
+ @echo " (See also debian/xsfbs/xsfbs-autoreconf.mk) "
+ @echo
+ @echo " If you see this message, autoreconfing actually SUCCEEDED, "
+ @echo " and your build should finish successfully, when rerun. "
+ @echo "****************************************************************"
+ @echo
+ exit 1;
+
+.PHONY: autoreconf
+autoreconf: debian/patches/patched.md5sum patch $(STAMP_DIR)/check.md5sum
+ if ! diff $(STAMP_DIR)/check.md5sum \
+ debian/patches/patched.md5sum > /dev/null; then \
+ $(MAKE) -f debian/rules doautoreconf; \
+ fi