--- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/changelog +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/changelog @@ -0,0 +1,61 @@ +xserver-xorg-video-i810-modesetting (1.6.5.git20061014.ac1-1ubuntu4) feisty; urgency=low + + * Brown paper bag bug: Add 13-i915_bios_fails_on_xserver_restart.patch + to debian/patches/series, retest and confirm no regressions + from ubuntu2. + + -- Daniel T Chen Mon, 15 Jan 2007 06:07:53 -0500 + +xserver-xorg-video-i810-modesetting (1.6.5.git20061014.ac1-1ubuntu3) feisty; urgency=low + + * debian/patches/: + - Add 11-xv_lockup.patch from Debian Sid's xserver-xorg-video-i810 + 2:1.7.2-3 source package, + - Add 12-man_page_linearalloc_fix.patch from upstream git + (8548fa53746c9886eccfb67d022136471d8f3316), + - Add 13-i915_bios_fails_on_xserver_restart.patch from upstream git + (33c0fac6d63d9a509a24c7a5e5a46a0d6ee4dc5d). + + -- Daniel T Chen Mon, 15 Jan 2007 05:21:41 -0500 + +xserver-xorg-video-i810-modesetting (1.6.5.git20061014.ac1-1ubuntu2) feisty; urgency=low + + * debian/control: provide xserver-xorg-video instead of + xserver-xorg-video-1.0 + + -- Michael Bienia Wed, 13 Dec 2006 21:18:37 +0100 + +xserver-xorg-video-i810-modesetting (1.6.5.git20061014.ac1-1ubuntu1) feisty; urgency=low + + * debian/control: + - set versioned build-depends on xserver-xorg-dev to (>= 1:1.1.1) + - set versioned depends on xserver-xorg-core to (>= 1:1.1.1) + + -- Michael Bienia Mon, 11 Dec 2006 02:24:11 +0100 + +xserver-xorg-video-i810-modesetting (1.6.5.git20061014.ac1-1) unstable; urgency=low + + * Apply autoreconf -i -f before creating orig.tar.gz source tarball + from upstream git source. This helps maintain correct permissions + for autoconf scripts (including configure). + + -- Drew Parsons Wed, 1 Nov 2006 21:37:25 +1100 + +xserver-xorg-video-i810-modesetting (1.6.5.git20061014-1) unstable; urgency=low + + * Bring into unstable to facilitate wider testing. + Not intended for etch. + + -- Drew Parsons Fri, 27 Oct 2006 13:53:40 +1000 + +xserver-xorg-video-i810-modesetting (1.6.5.git20061014-1~1) experimental; urgency=low + + * Initial packaging of modesetting branch of xf86-video-intel (i810). + This is a development snapshot only at the moment but should + eventually replace the i810 driver in the future. + * Patch 10_i830_modes_M_T_defines.patch enables build for this + version (workaround reported on xorg mailing list). + * configure script and friends generated with "autoreconf --install". + * Upload to experimental using "~1" underversion. + + -- Drew Parsons Sun, 15 Oct 2006 01:31:33 +1000 --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/compat +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/compat @@ -0,0 +1 @@ +5 --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/control +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/control @@ -0,0 +1,40 @@ +Source: xserver-xorg-video-i810-modesetting +Section: x11 +Priority: optional +Maintainer: Debian X Strike Force +Uploaders: David Nusinow , Branden Robinson , Drew Parsons +Build-Depends: debhelper (>= 5), pkg-config, quilt, xserver-xorg-dev (>= 1:1.1.1), x11proto-gl-dev, x11proto-video-dev, libdrm-dev, libgl1-mesa-dev | libgl-dev, libxvmc-dev (>= 1:1.0.1-1), x11proto-core-dev, x11proto-fonts-dev, x11proto-randr-dev, x11proto-render-dev, x11proto-xinerama-dev, libdrm-dev (>> 2.0), x11proto-xf86dri-dev +Standards-Version: 3.7.2 + +Package: xserver-xorg-video-i810-modesetting +Architecture: alpha amd64 arm hppa hurd-i386 i386 ia64 kfreebsd-i386 m68k mips mipsel netbsd-i386 powerpc +Depends: ${shlibs:Depends}, ${misc:Depends}, xserver-xorg-core (>= 1:1.1.1) +Provides: xserver-xorg-video +Conflicts: xserver-xorg-video-i810 +Replaces: xserver-xorg (<< 6.8.2-35), xserver-xorg-video-i810 +Description: X.Org X server -- Intel i8xx, i9xx display driver (modesetting) + This package is a development snapshot, it should be considered experimental. + Please use xserver-xorg-video-i810 instead if you have any doubts. + . + This package provides the development modesetting driver for the Intel i8xx + and i9xx family of chipsets, including i810, i815, i830, i845, + i855, i865, i915, and i945 series chips. + . + This modesetting branch is designed to provide more control over the modes + available to the driver, without having to depend on the VideoBIOS. It will + write extra debugging text to the Xorg log file. The modesetting version may + become the stable i810 in the future but is provided here for your testing + convenience. Please use the stable i810 driver instead if you do not want + to experiment with this driver. + . + This driver is still under heavy development and should therefore be + considered experimental. If in doubt, use the stable driver, + xserver-xorg-video-i810, instead. + . + More information about X.Org can be found at: + + + . + This module may be found as the modesetting branch of module + 'driver/xf86-video-intel' at + git://anongit.freedesktop.org/git/xorg/driver/xf86-video-intel --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/copyright +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/copyright @@ -0,0 +1,114 @@ +Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas. +Copyright © 2002 David Dawes +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sub license, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial portions +of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. +IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR +ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Copyright 2000 by Alan Hourihane, Sychdyn, North Wales, UK. + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that +copyright notice and this permission notice appear in supporting +documentation, and that the name of Alan Hourihane not be used in +advertising or publicity pertaining to distribution of the software without +specific, written prior permission. Alan Hourihane makes no representations +about the suitability of this software for any purpose. It is provided +"as is" without express or implied warranty. + +ALAN HOURIHANE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +EVENT SHALL ALAN HOURIHANE BE LIABLE FOR ANY SPECIAL, INDIRECT OR +CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, +DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER +TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +PERFORMANCE OF THIS SOFTWARE. + +Copyright 2000 Intel Corporation. All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sub license, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial portions +of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. +IN NO EVENT SHALL INTEL, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, +DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR +OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR +THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Copyright 2001 VA Linux Systems Inc., Fremont, California. +Copyright © 2002 by David Dawes + +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +on the rights to use, copy, modify, merge, publish, distribute, sub +license, and/or sell copies of the Software, and to permit persons to whom +the Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice (including the next +paragraph) shall be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL +ATI, VA LINUX SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, +DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR +OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE +USE OR OTHER DEALINGS IN THE SOFTWARE. + +Copyright © 2002 David Dawes + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, sublicense, +and/or sell copies of the Software, and to permit persons to whom the +Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +THE AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. + +Except as contained in this notice, the name of the author(s) shall +not be used in advertising or otherwise to promote the sale, use or other +dealings in this Software without prior written authorization from +the author(s). --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/patches/10_i830_modes_M_T_defines.patch +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/patches/10_i830_modes_M_T_defines.patch @@ -0,0 +1,16 @@ +Index: xserver-xorg-video-i810-modesetting/src/i830_modes.c +=================================================================== +--- xserver-xorg-video-i810-modesetting.orig/src/i830_modes.c 2006-10-15 01:03:35.000000000 +1000 ++++ xserver-xorg-video-i810-modesetting/src/i830_modes.c 2006-10-15 01:04:22.000000000 +1000 +@@ -72,6 +72,11 @@ + + #define C_PRIME (((C - J) * K/256.0) + J) + #define M_PRIME (K/256.0 * M) ++ ++/* workaround for broken build in 1.6.5.git20061014 */ ++# define M_T_PREFERRED 0x08 /* preferred mode within a set */ ++# define M_T_DRIVER 0x40 /* Supplied by the driver (EDID, etc) */ ++ + /* Established timings from EDID standard */ + static struct + { --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/patches/11-xv_lockup.patch +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/patches/11-xv_lockup.patch @@ -0,0 +1,30 @@ +From: Wang Zhenyu +Date: Mon, 30 Oct 2006 06:15:12 +0000 (+0800) +Subject: Bug 8594: Fix Xv hang with G965 +X-Git-Url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-intel.git;a=commitdiff;h=fbb376bd1a4daad4c86e349df98438989ce173f1 + +Bug 8594: Fix Xv hang with G965 +--- + +--- a/src/packed_yuv_wm.g4a ++++ b/src/packed_yuv_wm.g4a +@@ -144,7 +144,7 @@ mac.sat (8) m8<1>F g15<8,8,1>F 1F { alig + */ + mov (8) m1<1>UD g1<8,8,1>UD { align1 mask_disable }; + /* Send framebuffer write message: XXX: acc0? */ +-send (16) 0 null g0<8,8,1>UW write ( ++send (16) 0 acc0<1>UW g0<8,8,1>UW write ( + 0, /* binding table index 0 */ + 8, /* pixel scoreboard clear */ + 4, /* render target write */ +--- a/src/wm_prog.h ++++ b/src/wm_prog.h +@@ -71,7 +71,7 @@ + { 0x00600041, 0x20007fbc, 0x008d0220, 0x40011687 }, + { 0x80600048, 0x21007fbe, 0x008d01e0, 0x3f800000 }, + { 0x00600201, 0x20200022, 0x008d0020, 0x00000000 }, +- { 0x00800031, 0x20001d3c, 0x008d0000, 0x85a04800 }, ++ { 0x00800031, 0x24001d28, 0x008d0000, 0x85a04800 }, + { 0x0000007e, 0x00000000, 0x00000000, 0x00000000 }, + { 0x0000007e, 0x00000000, 0x00000000, 0x00000000 }, + { 0x0000007e, 0x00000000, 0x00000000, 0x00000000 }, --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/patches/12-man_page_linearalloc_fix.patch +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/patches/12-man_page_linearalloc_fix.patch @@ -0,0 +1,20 @@ +From: Alan Hourihane +Date: Mon, 23 Oct 2006 13:23:29 +0000 (+0100) +Subject: Fix manpage to report 8160 instead of 6144 for LinearAlloc. +X-Git-Tag: xf86-video-intel-1.7.3 / xf86-video-i810-1.7.3 +X-Git-Url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-intel.git;a=commitdiff;h=8548fa53746c9886eccfb67d022136471d8f3316 + +Fix manpage to report 8160 instead of 6144 for LinearAlloc. +--- + +--- a/man/i810.man ++++ b/man/i810.man +@@ -201,7 +201,7 @@ Default: 0 degrees. + .BI "Option \*qLinearAlloc\*q \*q" integer \*q + Allows more memory for the offscreen allocator. This usually helps in + situations where HDTV movies are required to play but not enough offscreen +-memory is usually available. Set this to 6144 for upto 1920x1080 HDTV support. ++memory is usually available. Set this to 8160 for upto 1920x1080 HDTV support. + Default 0KB (off). + + .SH "SEE ALSO" --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/patches/13-i915_bios_fails_on_xserver_restart.patch +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/patches/13-i915_bios_fails_on_xserver_restart.patch @@ -0,0 +1,20 @@ +From: Alan Hourihane +Date: Tue, 9 Jan 2007 14:02:47 +0000 (+0000) +Subject: Fix bug #8536, i915 BIOS fails when restarting Xserver. +X-Git-Tag: xf86-video-i810-1.7.4 / xf86-video-intel-1.7.4 +X-Git-Url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-intel.git;a=commitdiff;h=33c0fac6d63d9a509a24c7a5e5a46a0d6ee4dc5d + +Fix bug #8536, i915 BIOS fails when restarting Xserver. +--- + +--- a/src/i830_driver.c ++++ b/src/i830_driver.c +@@ -7087,7 +7087,7 @@ IntelEmitInvarientState(ScrnInfoPtr pScr + I830Ptr pI830 = I830PTR(pScrn); + CARD32 ctx_addr; + +- if (pI830->noAccel) ++ if (pI830->noAccel || !I830IsPrimary(pScrn)) + return; + + ctx_addr = pI830->ContextMem.Start; --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/patches/series +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/patches/series @@ -0,0 +1,4 @@ +10_i830_modes_M_T_defines.patch +11-xv_lockup.patch +12-man_page_linearalloc_fix.patch +13-i915_bios_fails_on_xserver_restart.patch --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/rules +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/rules @@ -0,0 +1,93 @@ +#!/usr/bin/make -f +# debian/rules for the Debian xserver-xorg-driver-i810-modesetting package. +# Copyright © 2004 Scott James Remnant +# Copyright © 2005 Daniel Stone +# Copyright © 2005 David Nusinow + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +include debian/xsfbs/xsfbs.mk + +CFLAGS = -Wall -g +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif +ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) + INSTALL_PROGRAM += -s +endif + +DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) +ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) + confflags += --build=$(DEB_HOST_GNU_TYPE) +else + confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE) +endif + +# kbd_drv.a isn't phenomenally useful; kbd_drv.so more so +confflags += --disable-static + +build: patch build-stamp +build-stamp: + dh_testdir + + test -d obj-$(DEB_BUILD_GNU_TYPE) || mkdir obj-$(DEB_BUILD_GNU_TYPE) + cd obj-$(DEB_BUILD_GNU_TYPE) && \ + ../configure --prefix=/usr --mandir=\$${prefix}/share/man \ + --infodir=\$${prefix}/share/info $(confflags) \ + CFLAGS="$(CFLAGS)" + cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) + + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + + rm -f config.cache config.log config.status + rm -f */config.cache */config.log */config.status + rm -f conftest* */conftest* + rm -rf autom4te.cache */autom4te.cache + rm -rf obj-* + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + + dh_installdocs + dh_installchangelogs + dh_install --sourcedir=debian/tmp --list-missing --exclude=.la --exclude=usr/share/man/man4 + dh_installman + dh_link + dh_strip + dh_compress + dh_fixperms + dh_makeshlibs + dh_shlibdeps + dh_installdeb + dh_gencontrol + dh_md5sums + dh_builddeb + +# Build architecture-independent files here. +binary-indep: build install +# Nothing to do + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/xserver-xorg-video-i810-modesetting.install +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/xserver-xorg-video-i810-modesetting.install @@ -0,0 +1,2 @@ +usr/lib/xorg/modules/drivers/*.so +usr/lib/libI810XvMC.so* --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/xserver-xorg-video-i810-modesetting.manpages +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/xserver-xorg-video-i810-modesetting.manpages @@ -0,0 +1 @@ +debian/tmp/usr/share/man/man4/* --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/xsfbs/xsfbs-autoreconf.mk +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/xsfbs/xsfbs-autoreconf.mk @@ -0,0 +1,150 @@ +#!/usr/bin/make -f +# $Id: xsfbs-autoreconf.mk 2284 2006-06-06 18:02:50Z branden $ + +# Automagical conversion of autoreconf results into quilt patches. + +# Copyright 2006 Eugene Konev +# +# Licensed under the GNU General Public License, version 2. See the file +# /usr/share/common-licenses/GPL or . + +# The idea behind this is storing changes produced by autoreconf as a +# separate patch on quilt stack (on top of stack actually). +# The only usable target here is 'autoreconf`. Other targets are not +# supposed to be called directly. DO NOT invoke them, unless you know what +# you are doing. +# The autoreconf target will check if files with names in $(RECONF_CHECKFILES) +# were changed during patching (from upstream version or from previously +# autoreconfed version) and call actual autoreconfing if they were. +# The actual autoreconfing target (doautoreconf) WILL FAIL after +# calling autoreconf and pushing changes into quilt stack by design. It +# should never be invoked by automatic build process. +# The proposed use is adding autoreconf into clean's prerequisites before +# xsfclean like: +# - clean: xsfclean +# + clean: autoreconf xsfclean +# This will ensure it is called when you build package with dpkg-buildpackage. + +# This dir will be used for producing diff of autoreconfed tree +RECONF_DIR := xsfautoreconf + +# This files will be checked for changes +RECONF_CHECKFILES += configure.ac Makefile.am + +# This files will not be hardlinked but copied +RECONF_NOLINKFILES += aclocal.m4 + +# This files/dirs will be pruned after autoreconf run +RECONF_PRUNEFILES += autom4te.cache config.h.in~ aclocal.m4~ + +# Internal target. Never invoke directly. +stampdir_target+=check.md5sum +$(STAMP_DIR)/check.md5sum: + dh_testdir + $(MAKE) -f debian/rules prepare + for F in $(RECONF_CHECKFILES); do \ + find . -wholename ./$(STAMP_DIR) -prune -o -name $$F -print | \ + LC_ALL=C sort | xargs --no-run-if-empty md5sum >>$@; \ + done + +# Internal target. Never invoke directly. +$(STAMP_DIR)/clean.md5sum: + dh_testdir + $(MAKE) -f debian/rules unpatch + rm -f $(STAMP_DIR)/check.md5sum + $(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum + mv $(STAMP_DIR)/check.md5sum $@ + +# Internal target. Never invoke directly. +debian/patches/patched.md5sum: + dh_testdir + [ -f $(STAMP_DIR)/clean.md5sum ] || \ + $(MAKE) -f debian/rules $(STAMP_DIR)/clean.md5sum + + $(MAKE) -f debian/rules patch + rm -f $(STAMP_DIR)/check.md5sum + $(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum + if ! diff $(STAMP_DIR)/clean.md5sum \ + $(STAMP_DIR)/check.md5sum > /dev/null; then \ + $(MAKE) -f debian/rules doautoreconf; \ + else \ + mv $(STAMP_DIR)/check.md5sum $@; \ + fi + +# Internal target. Never invoke directly. +,PHONY: doautoreconf +doautoreconf: patch + quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1 || true + if quilt applied | grep ^autoreconf.diff$$ > /dev/null; then \ + quilt pop -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \ + quilt rename -p autoreconf.diff autoreconf-old.diff \ + >>$(STAMP_DIR)/log/autoreconf 2>&1; \ + quilt delete autoreconf-old.diff >>$(STAMP_DIR)/log/autoreconf 2>&1; \ + quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \ + fi + + if [ -e $(RECONF_DIR) ]; then \ + echo "ERROR: $(RECONF_DIR) already exists. Cleanup by hand"; \ + exit 1; \ + fi + + mkdir -p $(RECONF_DIR)/before + find . -maxdepth 1 -mindepth 1 ! -wholename ./$(RECONF_DIR) \ + -a ! -wholename ./debian -a ! -wholename ./patches \ + -a ! -wholename ./.pc -a ! -wholename ./$(STAMP_DIR) | \ + xargs -i{} cp -al {} $(RECONF_DIR)/before/ + + for F in $(RECONF_PRUNEFILES); do \ + find $(RECONF_DIR)/before -name $$F -print | \ + xargs --no-run-if-empty rm -r; \ + done + + cp -al $(RECONF_DIR)/before $(RECONF_DIR)/after + + for F in $(RECONF_NOLINKFILES); do \ + find . -wholename ./$(RECONF_DIR) -prune -o -wholename ./debian \ + -prune -o -wholename ./$(STAMP_DIR) -prune -o -name $$F \ + -print | \ + xargs --no-run-if-empty -i{} cp --remove-destination {} \ + $(RECONF_DIR)/after/{}; \ + done + + cd $(RECONF_DIR)/after && autoreconf -v --install && \ + for F in $(RECONF_PRUNEFILES); do \ + find . -name $$F -print | \ + xargs --no-run-if-empty rm -r; \ + done + + cd $(RECONF_DIR) && diff -Nru before after > autoreconf.diff || true + + quilt import $(RECONF_DIR)/autoreconf.diff \ + >>$(STAMP_DIR)/log/autoreconf 2>&1 + + mv $(STAMP_DIR)/check.md5sum debian/patches/patched.md5sum + + rm -r $(RECONF_DIR) && rm -f patches/autoreconf-old.diff + + @echo + @echo "****************************************************************" + @echo " This target is made to fail INTENTIONALLY. It should NEVER " + @echo " be invoked during automatic builds. " + @echo + @echo " This target was invoked because you added/removed/changed " + @echo " patches which modify either configure.ac or Makefile.am and, " + @echo " thus, require autoreconf run. And all autoreconfing should " + @echo " happen before uploading. " + @echo + @echo " (See also debian/xsfbs/xsfbs-autoreconf.mk) " + @echo + @echo " If you see this message, autoreconfing actually SUCCEEDED, " + @echo " and your build should finish successfully, when rerun. " + @echo "****************************************************************" + @echo + exit 1; + +.PHONY: autoreconf +autoreconf: debian/patches/patched.md5sum patch $(STAMP_DIR)/check.md5sum + if ! diff $(STAMP_DIR)/check.md5sum \ + debian/patches/patched.md5sum > /dev/null; then \ + $(MAKE) -f debian/rules doautoreconf; \ + fi --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/xsfbs/xsfbs.mk +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/xsfbs/xsfbs.mk @@ -0,0 +1,359 @@ +#!/usr/bin/make -f +# $Id: xsfbs.mk 2284 2006-06-06 18:02:50Z branden $ + +# Debian rules file for xorg-x11 source package + +# Copyright 1996 Stephen Early +# Copyright 1997 Mark Eichin +# Copyright 1998-2005 Branden Robinson +# Copyright 2005 David Nusinow +# +# Licensed under the GNU General Public License, version 2. See the file +# /usr/share/common-licenses/GPL or . + +# Originally by Stephen Early +# Modified by Mark W. Eichin +# Modified by Adam Heath +# Modified by Branden Robinson +# Modified by Fabio Massimo Di Nitto +# Modified by David Nusinow +# Acknowledgements to Manoj Srivastava. + +# Pass $(DH_OPTIONS) into the environment for debhelper's benefit. +export DH_OPTIONS + +# Set up parameters for the upstream build environment. + +# Determine (source) package name from Debian changelog. +SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \ + | grep '^Source:' | awk '{print $$2}') + +# Determine package version from Debian changelog. +SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \ + | grep '^Version:' | awk '{print $$2}') + +# Determine upstream version number. +UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//') + +# Determine the source version without the epoch for make-orig-tar-gz +NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://') + +# Figure out who's building this package. +BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}}) + +# Find out if this is an official build; an official build has nothing but +# digits, dots, and/or the strings "woody" or "sarge" in the Debian part of the +# version number. Anything else indicates an unofficial build. +OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi) + +# Set up parameters for the Debian build environment. + +# Determine our architecture. +BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH) +# Work around some old-time dpkg braindamage. +BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH)) +# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy. +ifdef DEB_HOST_ARCH + ARCH:=$(DEB_HOST_ARCH) +else + # dpkg-cross sets the ARCH environment variable; if set, use it. + ifdef ARCH + ARCH:=$(ARCH) + else + ARCH:=$(BUILD_ARCH) + endif +endif + +# $(STAMP_DIR) houses stamp files for complex targets. +STAMP_DIR:=stampdir + +# $(SOURCE_DIR) houses one or more source trees. +SOURCE_DIR:=build-tree + +# $(SOURCE_TREE) is the location of the source tree to be compiled. If there +# is more than one, others are found using this name plus a suffix to indicate +# the purpose of the additional tree (e.g., $(SOURCE_TREE)-custom). The +# "setup" target is responsible for creating such trees. +#SOURCE_TREE:=$(SOURCE_DIR)/xc +#FIXME We need to define this in our debian/rules file + +# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place +# their files. +DEBTREEDIR:=$(CURDIR)/debian/tmp + +# All "important" targets have four lines: +# 1) A target name that is invoked by a package-building tool or the user. +# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart. +# 2) A line delcaring 1) as a phony target (".PHONY:"). +# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may +# depend on other targets. +# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the +# "$(STAMP_DIR)/" prefix is omitted. +# +# This indirection is needed so that the "stamp" files that signify when a rule +# is done can be located in a separate "stampdir". Recall that make has no way +# to know when a goal has been met for a phony target (like "build" or +# "install"). +# +# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@" +# so that the target will not be run again. Removing the file will make Make +# run the target over. + +# All phony targets should be declared as dependencies of .PHONY, even if they +# do not have "($STAMP_DIR)/"-prefixed counterparts. + +# Define a harmless default rule to keep things from going nuts by accident. +.PHONY: default +default: + +# Set up the $(STAMP_DIR) directory. +.PHONY: stampdir +stampdir_targets+=stampdir +stampdir: $(STAMP_DIR)/stampdir +$(STAMP_DIR)/stampdir: + mkdir $(STAMP_DIR) + >$@ + +# Set up the package build directory as quilt expects to find it. +.PHONY: prepare +stampdir_targets+=prepare +prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare $(STAMP_DIR)/patches $(STAMP_DIR)/log +$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir + if [ ! -e $(STAMP_DIR)/patches ]; then \ + mkdir $(STAMP_DIR)/patches; \ + ln -s $(STAMP_DIR)/patches .pc; \ + echo 2 >$(STAMP_DIR)/patches/.version; \ + fi; \ + if [ ! -e $(STAMP_DIR)/log ]; then \ + mkdir $(STAMP_DIR)/log; \ + fi; \ + if [ ! -e patches ]; then \ + ln -s debian/patches patches; \ + fi; \ + >$@ + +# Apply all patches to the upstream source. +.PHONY: patch +stampdir_targets+=patch +patch: $(STAMP_DIR)/patch +$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare + if ! [ `which quilt` ]; then \ + echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \ + exit 1; \ + fi; \ + if quilt next; then \ + echo -n "Applying patches..."; \ + if quilt push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \ + echo "successful."; \ + else \ + echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \ + exit 1; \ + fi; \ + else \ + echo "No patches to apply"; \ + fi; \ + >$@ + +# Revert all patches to the upstream source. +.PHONY: unpatch +unpatch: + rm -f $(STAMP_DIR)/patch + @echo -n "Unapplying patches..."; \ + if [ -e $(STAMP_DIR)/patches/applied-patches ]; then \ + if quilt pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \ + echo "successful."; \ + else \ + echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \ + exit 1; \ + fi; \ + else \ + echo "nothing to do."; \ + fi + +# Clean the generated maintainer scripts. +.PHONY: cleanscripts +cleanscripts: + rm -f $(STAMP_DIR)/genscripts + rm -f debian/*.config \ + debian/*.postinst \ + debian/*.postrm \ + debian/*.preinst \ + debian/*.prerm + +# Clean the package build tree. +.PHONY: xsfclean +xsfclean: cleanscripts unpatch + dh_testdir + rm -f .pc patches + rm -rf $(STAMP_DIR) $(SOURCE_DIR) + rm -rf imports + dh_clean debian/shlibs.local \ + debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new \ + debian/po/pothead + +# Generate the debconf templates POT file header. +debian/po/pothead: debian/po/pothead.in + sed -e 's/SOURCE_VERSION/$(SOURCE_VERSION)/' \ + -e 's/DATE/$(shell date "+%F %X%z"/)' <$< >$@ + +# Update POT and PO files. +.PHONY: updatepo +updatepo: debian/po/pothead + debian/scripts/debconf-updatepo --pot-header=pothead --verbose + +# Use the MANIFEST files to determine whether we're shipping everything we +# expect to ship, and not shipping anything we don't expect to ship. +.PHONY: check-manifest +stampdir_targets+=check-manifest +check-manifest: $(STAMP_DIR)/check-manifest +$(STAMP_DIR)/check-manifest: $(STAMP_DIR)/install + # Compare manifests. + (cd debian/tmp && find -type f | LC_ALL=C sort | cut -c3-) \ + >debian/MANIFEST.$(ARCH).new + # Construct MANIFEST files from MANIFEST.$(ARCH).in and + # MANIFEST.$(ARCH).all or MANIFEST.all. + if expr "$(findstring -DBuildFonts=NO,$(IMAKE_DEFINES))" \ + : "-DBuildFonts=NO" >/dev/null 2>&1; then \ + LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in >debian/MANIFEST.$(ARCH); \ + else \ + if [ -e debian/MANIFEST.$(ARCH).all ]; then \ + LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in debian/MANIFEST.$(ARCH).all >debian/MANIFEST.$(ARCH); \ + else \ + LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in debian/MANIFEST.all >debian/MANIFEST.$(ARCH); \ + fi; \ + fi + # Confirm that the installed file list has not changed. + if [ -e debian/MANIFEST.$(ARCH) ]; then \ + if ! cmp -s debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new; then \ + diff -U 0 debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new || DIFFSTATUS=$$?; \ + case $${DIFFSTATUS:-0} in \ + 0) ;; \ + 1) if [ -n "$$IGNORE_MANIFEST_CHANGES" ]; then \ + echo 'MANIFEST check failed; ignoring problem because \$$IGNORE_MANIFEST_CHANGES set' >&2; \ + echo 'Please ensure that the package maintainer has an up-to-date version of the' >&2; \ + echo 'MANIFEST.$(ARCH).in file.' >&2; \ + else \ + echo 'MANIFEST check failed; please see debian/README' >&2; \ + exit 1; \ + fi; \ + ;; \ + *) echo "diff reported unexpected exit status $$DIFFSTATUS when performing MANIFEST check" >&2; \ + exit 1; \ + ;; \ + esac; \ + fi; \ + fi + >$@ + +# Because we build (and install) different files depending on whether or not +# any architecture-independent packages are being created, the list of files we +# expect to see will differ; see the discussion of the "build" target above. +.PHONY: check-manifest-arch check-manifest-indep +check-manifest-arch: IMAKE_DEFINES+= -DBuildSpecsDocs=NO -DBuildFonts=NO -DInstallHardcopyDocs=NO +check-manifest-arch: check-manifest +check-manifest-indep: check-manifest + +# Remove files from the upstream source tree that we don't need, or which have +# licensing problems. It must be run before creating the .orig.tar.gz. +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +.PHONY: prune-upstream-tree +prune-upstream-tree: + # Ensure we're in the correct directory. + dh_testdir + grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf + +# Change to what should be the correct directory, ensure it is, and if +# so, create the .orig.tar.gz file. Exclude the debian directory and its +# contents, and any .svn directories and their contents (so that we can safely +# build an .orig.tar.gz from SVN checkout, not just an export). +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +# +# This rule *IS* the recommended method for creating a new .orig.tar.gz file, +# for the rare situations when one is needed. +.PHONY: make-orig-tar-gz +make-orig-tar-gz: clean prune-upstream-tree + ( cd .. \ + && if [ $(shell basename $(CURDIR)) != $(SOURCE_NAME)-$(NO_EPOCH_VER) ]; then \ + echo "Our current working directory has the wrong name. Renaming..." >&2; \ + mv $(CURDIR) $(SOURCE_NAME)-$(NO_EPOCH_VER); \ + fi; \ + tar --exclude=debian --exclude=debian/* \ + --exclude=.svn --exclude=.svn/* \ + -cf - $(SOURCE_NAME)-$(NO_EPOCH_VER) \ + | gzip -9 >$(SOURCE_NAME)_$(NO_EPOCH_VER).orig.tar.gz; \ + ) + +# Verify that there are no offsets or fuzz in the patches we apply. +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +.PHONY: patch-audit +patch-audit: prepare unpatch + @echo -n "Auditing patches..."; \ + >$(STAMP_DIR)/log/patch; \ + FUZZY=; \ + while [ -n "$$(quilt next)" ]; do \ + RESULT=$$(quilt push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\ + case "$$RESULT" in \ + succeeded) \ + echo "fuzzy patch: $$(quilt top)" \ + | tee -a $(STAMP_DIR)/log/$$(quilt top); \ + FUZZY=yes; \ + ;; \ + FAILED) \ + echo "broken patch: $$(quilt next)" \ + | tee -a $(STAMP_DIR)/log/$$(quilt next); \ + exit 1; \ + ;; \ + esac; \ + done; \ + if [ -n "$$FUZZY" ]; then \ + echo "there were fuzzy patches; please fix."; \ + exit 1; \ + else \ + echo "done."; \ + fi + +# Generate the maintainer scripts. +.PHONY: genscripts +stampdir_targets+=genscripts +genscripts: $(STAMP_DIR)/genscripts +$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir + for FILE in debian/*.config.in \ + debian/*.postinst.in \ + debian/*.postrm.in \ + debian/*.preinst.in \ + debian/*.prerm.in; do \ + if [ -e "$$FILE" ]; then \ + MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \ + sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \ + | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \ + cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \ + sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \ + | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \ + sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \ + -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \ + -e 's/@DEFAULT_DCRESOLUTIONS@/$(DEFAULT_DCRESOLUTIONS)/' \ + <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \ + rm $$MAINTSCRIPT.tmp; \ + fi; \ + done + # Validate syntax of generated shell scripts. + #sh debian/scripts/validate-posix-sh debian/*.config \ + # debian/*.postinst \ + # debian/*.postrm \ + # debian/*.preinst \ + # debian/*.prerm + >$@ + +# Generate the shlibs.local file. +debian/shlibs.local: + cat debian/*.shlibs >$@ + +include debian/xsfbs/xsfbs-autoreconf.mk + +# vim:set noet ai sts=8 sw=8 tw=0: --- xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1.orig/debian/xsfbs/xsfbs.sh +++ xserver-xorg-video-i810-modesetting-1.6.5.git20061014.ac1/debian/xsfbs/xsfbs.sh @@ -0,0 +1,907 @@ +# $Id: xsfbs.sh 2888 2006-08-22 03:04:13Z dnusinow $ + +# This is the X Strike Force shell library for X Window System package +# maintainer scripts. It serves to define shell functions commonly used by +# such packages, and performs some error checking necessary for proper operation +# of those functions. By itself, it does not "do" much; the maintainer scripts +# invoke the functions defined here to accomplish package installation and +# removal tasks. + +# If you are reading this within a Debian package maintainer script (e.g., +# /var/lib/dpkg)info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can +# skip past this library by scanning forward in this file to the string +# "GOBSTOPPER". + +SOURCE_VERSION=@SOURCE_VERSION@ +OFFICIAL_BUILD=@OFFICIAL_BUILD@ + +# Use special abnormal exit codes so that problems with this library are more +# easily tracked down. +SHELL_LIB_INTERNAL_ERROR=86 +SHELL_LIB_THROWN_ERROR=74 +SHELL_LIB_USAGE_ERROR=99 + +# old -> new variable names +if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then + DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE" +fi +if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then + DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF" +fi + +# initial sanity checks +if [ -z "$THIS_PACKAGE" ]; then + cat >&2 < on the World Wide Web for +instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the +"doc-debian" package, or install the "reportbug" package and use the command of +the same name to file a report against version $SOURCE_VERSION of this package. +EOF + exit $SHELL_LIB_USAGE_ERROR +fi + +if [ -z "$THIS_SCRIPT" ]; then + cat >&2 < on the World Wide Web for +instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the +"doc-debian" package, or install the "reportbug" package and use the command of +the same name to file a report against version $SOURCE_VERSION of the +"$THIS_PACKAGE" package. +EOF + exit $SHELL_LIB_USAGE_ERROR +fi + +ARCHITECTURE="$(dpkg --print-installation-architecture)" + +LAPTOP="" +if [ -n "$(which laptop-detect)" ]; then + if laptop-detect >/dev/null; then + LAPTOP=true + fi +fi + +if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then + RECONFIGURE="true" +else + RECONFIGURE= +fi + +if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then + FIRSTINST="yes" +fi + +if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then + UPGRADE="yes" +fi + +trap "message;\ + message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\ + message;\ + exit 1" HUP INT QUIT TERM + +reject_nondigits () { + # syntax: reject_nondigits [ operand ... ] + # + # scan operands (typically shell variables whose values cannot be trusted) for + # characters other than decimal digits and barf if any are found + while [ -n "$1" ]; do + # does the operand contain anything but digits? + if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then + # can't use die(), because it wraps message() which wraps this function + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \ + "possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + shift + done +} + +reject_whitespace () { + # syntax: reject_whitespace [ operand ] + # + # scan operand (typically a shell variable whose value cannot be trusted) for + # whitespace characters and barf if any are found + if [ -n "$1" ]; then + # does the operand contain any whitespace? + if expr "$1" : "[[:space:]]" > /dev/null 2>&1; then + # can't use die(), because I want to avoid forward references + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_whitespace() encountered" \ + "possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + fi +} + +reject_unlikely_path_chars () { + # syntax: reject_unlikely_path_chars [ operand ... ] + # + # scan operands (typically shell variables whose values cannot be trusted) for + # characters unlikely to be seen in a path and which the shell might + # interpret and barf if any are found + while [ -n "$1" ]; do + # does the operand contain any funny characters? + if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then + # can't use die(), because I want to avoid forward references + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \ + "encountered possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + shift + done +} + +# Query the terminal to establish a default number of columns to use for +# displaying messages to the user. This is used only as a fallback in the +# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while +# the script is running, and this cannot, only being calculated once.) +DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true +if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then + DEFCOLUMNS=80 +fi + +message () { + # pretty-print messages of arbitrary length + reject_nondigits "$COLUMNS" + echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2 +} + +observe () { + # syntax: observe message ... + # + # issue observational message suitable for logging someday when support for + # it exists in dpkg + if [ -n "$DEBUG_XORG_PACKAGE" ]; then + message "$THIS_PACKAGE $THIS_SCRIPT note: $*" + fi +} + +warn () { + # syntax: warn message ... + # + # issue warning message suitable for logging someday when support for + # it exists in dpkg; also send to standard error + message "$THIS_PACKAGE $THIS_SCRIPT warning: $*" +} + +die () { + # syntax: die message ... + # + # exit script with error message + message "$THIS_PACKAGE $THIS_SCRIPT error: $*" + exit $SHELL_LIB_THROWN_ERROR +} + +internal_error () { + # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message + message "internal error: $*" + if [ -n "$OFFICIAL_BUILD" ]; then + message "Please report a bug in the $THIS_SCRIPT script of the" \ + "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ + "Tracking System. Include all messages above that mention the" \ + "$THIS_PACKAGE package. Visit " \ + " on the World Wide Web for" \ + "instructions, read the file" \ + "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ + "package, or install the reportbug package and use the command of" \ + "the same name to file a report." + fi + exit $SHELL_LIB_INTERNAL_ERROR +} + +usage_error () { + message "usage error: $*" + message "Please report a bug in the $THIS_SCRIPT script of the" \ + "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ + "Tracking System. Include all messages above that mention the" \ + "$THIS_PACKAGE package. Visit " \ + " on the World Wide Web for" \ + "instructions, read the file" \ + "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ + "package, or install the reportbug package and use the command of" \ + "the same name to file a report." + exit $SHELL_LIB_USAGE_ERROR +} + + +maplink () { + # returns what symlink should point to; i.e., what the "sane" answer is + # Keep this in sync with the debian/*.links files. + # This is only needed for symlinks to directories. + # + # XXX: Most of these look wrong in the X11R7 world and need to be fixed. + # If we've stopped using this function, fixing it might enable us to re-enable + # it again and catch more errors. + case "$1" in + /etc/X11/xkb/compiled) echo /var/lib/xkb ;; + /etc/X11/xkb/xkbcomp) echo /usr/X11R6/bin/xkbcomp ;; + /usr/X11R6/lib/X11/app-defaults) echo /etc/X11/app-defaults ;; + /usr/X11R6/lib/X11/fs) echo /etc/X11/fs ;; + /usr/X11R6/lib/X11/lbxproxy) echo /etc/X11/lbxproxy ;; + /usr/X11R6/lib/X11/proxymngr) echo /etc/X11/proxymngr ;; + /usr/X11R6/lib/X11/rstart) echo /etc/X11/rstart ;; + /usr/X11R6/lib/X11/twm) echo /etc/X11/twm ;; + /usr/X11R6/lib/X11/xdm) echo /etc/X11/xdm ;; + /usr/X11R6/lib/X11/xinit) echo /etc/X11/xinit ;; + /usr/X11R6/lib/X11/xkb) echo /etc/X11/xkb ;; + /usr/X11R6/lib/X11/xserver) echo /etc/X11/xserver ;; + /usr/X11R6/lib/X11/xsm) echo /etc/X11/xsm ;; + /usr/bin/X11) echo ../X11R6/bin ;; + /usr/bin/rstartd) echo ../X11R6/bin/rstartd ;; + /usr/include/X11) echo ../X11R6/include/X11 ;; + /usr/lib/X11) echo ../X11R6/lib/X11 ;; + *) internal_error "maplink() called with unknown path \"$1\"" ;; + esac +} + +analyze_path () { + # given a supplied set of pathnames, break each one up by directory and do an + # ls -dl on each component, cumulatively; i.e. + # analyze_path /usr/X11R6/bin -> ls -dl /usr /usr/X11R6 /usr/X11R6/bin + # Thanks to Randolph Chung for this clever hack. + + #local f g + + while [ -n "$1" ]; do + reject_whitespace "$1" + _g= + message "Analyzing $1:" + for _f in $(echo "$1" | tr / \ ); do + if [ -e /$_g$_f ]; then + ls -dl /$_g$_f /$_g$_f.dpkg-* 2> /dev/null || true + _g=$_g$_f/ + else + message "/$_g$_f: nonexistent; directory contents of /$_g:" + ls -l /$_g + break + fi + done + shift + done +} + +find_culprits () { + #local f p dpkg_info_dir possible_culprits smoking_guns bad_packages package \ + # msg + + reject_whitespace "$1" + message "Searching for overlapping packages..." + _dpkg_info_dir=/var/lib/dpkg/info + if [ -d $_dpkg_info_dir ]; then + if [ "$(echo $_dpkg_info_dir/*.list)" != "$_dpkg_info_dir/*.list" ]; then + _possible_culprits=$(ls -1 $_dpkg_info_dir/*.list | egrep -v \ + "(xbase-clients|x11-common|xfs|xlibs)") + if [ -n "$_possible_culprits" ]; then + _smoking_guns=$(grep -l "$1" $_possible_culprits || true) + if [ -n "$_smoking_guns" ]; then + _bad_packages=$(printf "\\n") + for f in $_smoking_guns; do + # too bad you can't nest parameter expansion voodoo + p=${f%*.list} # strip off the trailing ".list" + _package=${p##*/} # strip off the directories + _bad_packages=$(printf "%s\n%s" "$_bad_packages" "$_package") + done + _msg=$(cat < /dev/null 2>&1; then + message "The readlink command was not found. Please install version" \ + "1.13.1 or later of the debianutils package." + readlink () { + # returns what symlink in $1 actually points to + perl -e '$l = shift; exit 1 unless -l $l; $r = readlink $l; exit 1 unless $r; print "$r\n"' "$1" + } +fi + +check_symlink () { + # syntax: check_symlink symlink + # + # See if specified symlink points where it is supposed to. Return 0 if it + # does, and 1 if it does not. + # + # Primarily used by check_symlinks_and_warn() and check_symlinks_and_bomb(). + + #local symlink + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "check_symlink() called with wrong number of arguments;" \ + "expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _symlink="$1" + + if [ "$(maplink "$_symlink")" = "$(readlink "$_symlink")" ]; then + return 0 + else + return 1 + fi +} + +check_symlinks_and_warn () { + # syntax: check_symlinks_and_warn symlink ... + # + # For each argument, check for symlink sanity, and warn if it isn't sane. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install". + + #local errmsg symlink + + # validate arguments + if [ $# -lt 1 ]; then + usage_error "check_symlinks_and_warn() called with wrong number of" \ + "arguments; expected at least 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + while [ -n "$1" ]; do + _symlink="$1" + if [ -L "$_symlink" ]; then + if ! check_symlink "$_symlink"; then + observe "$_symlink symbolic link points to wrong location" \ + "$(readlink "$_symlink"); removing" + rm "$_symlink" + fi + elif [ -e "$_symlink" ]; then + _errmsg="$_symlink exists and is not a symbolic link; this package cannot" + _errmsg="$_errmsg be installed until this" + if [ -f "$_symlink" ]; then + _errmsg="$_errmsg file" + elif [ -d "$_symlink" ]; then + _errmsg="$_errmsg directory" + else + _errmsg="$_errmsg thing" + fi + _errmsg="$_errmsg is removed" + die "$_errmsg" + fi + shift + done +} + +check_symlinks_and_bomb () { + # syntax: check_symlinks_and_bomb symlink ... + # + # For each argument, check for symlink sanity, and bomb if it isn't sane. + # + # Call this function from a postinst script. + + #local problem symlink + + # validate arguments + if [ $# -lt 1 ]; then + usage_error "check_symlinks_and_bomb() called with wrong number of" + "arguments; expected at least 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + while [ -n "$1" ]; do + _problem= + _symlink="$1" + if [ -L "$_symlink" ]; then + if ! check_symlink "$_symlink"; then + _problem=yes + warn "$_symlink symbolic link points to wrong location" \ + "$(readlink "$_symlink")" + fi + elif [ -e "$_symlink" ]; then + _problem=yes + warn "$_symlink is not a symbolic link" + else + _problem=yes + warn "$_symlink symbolic link does not exist" + fi + if [ -n "$_problem" ]; then + analyze_path "$_symlink" "$(readlink "$_symlink")" + find_culprits "$_symlink" + die "bad symbolic links on system" + fi + shift + done +} + +font_update () { + # run $UPDATECMDS in $FONTDIRS + + #local dir cmd shortcmd x_font_dir_prefix + + _x_font_dir_prefix="/usr/share/fonts/X11" + + if [ -z "$UPDATECMDS" ]; then + usage_error "font_update() called but \$UPDATECMDS not set" + fi + if [ -z "$FONTDIRS" ]; then + usage_error "font_update() called but \$FONTDIRS not set" + fi + + reject_unlikely_path_chars "$UPDATECMDS" + reject_unlikely_path_chars "$FONTDIRS" + + for _dir in $FONTDIRS; do + if [ -d "$_x_font_dir_prefix/$_dir" ]; then + for _cmd in $UPDATECMDS; do + if which "$_cmd" > /dev/null 2>&1; then + _shortcmd=${_cmd##*/} + observe "running $_shortcmd in $_dir font directory" + _cmd_opts= + if [ "$_shortcmd" = "update-fonts-alias" ]; then + _cmd_opts=--x11r7-layout + fi + if [ "$_shortcmd" = "update-fonts-dir" ]; then + _cmd_opts=--x11r7-layout + fi + if [ "$_shortcmd" = "update-fonts-scale" ]; then + _cmd_opts=--x11r7-layout + fi + $_cmd $_cmd_opts $_dir || warn "$_cmd $_cmd_opts $_dir" \ + "failed; font directory data may not" \ + "be up to date" + else + warn "$_cmd not found; not updating corresponding $_dir font" \ + "directory data" + fi + done + else + warn "$_dir is not a directory; not updating font directory data" + fi + done +} + +remove_conffile_prepare () { + # syntax: remove_conffile_prepare filename official_md5sum ... + # + # Check a conffile "filename" against a list of canonical MD5 checksums. + # If the file's current MD5 checksum matches one of the "official_md5sum" + # operands provided, then prepare the conffile for removal from the system. + # We defer actual deletion until the package is configured so that we can + # roll this operation back if package installation fails. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install" and verify $2 to ensure the package is being upgraded from a + # version (or installed over a version removed-but-not-purged) prior to the + # one in which the conffile was obsoleted. + + #local conffile current_checksum + + # validate arguments + if [ $# -lt 2 ]; then + usage_error "remove_conffile_prepare() called with wrong number of" \ + "arguments; expected at least 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _conffile="$1" + shift + + # does the _conffile even exist? + if [ -e "$_conffile" ]; then + # calculate its checksum + _current_checksum=$(md5sum < "$_conffile" | sed 's/[[:space:]].*//') + # compare it to each supplied checksum + while [ -n "$1" ]; do + if [ "$_current_checksum" = "$1" ]; then + # we found a match; move the confffile and stop looking + observe "preparing obsolete conffile $_conffile for removal" + mv "$_conffile" "$_conffile.$THIS_PACKAGE-tmp" + break + fi + shift + done + fi +} + +remove_conffile_commit () { + # syntax: remove_conffile_commit filename + # + # Complete the removal of a conffile "filename" that has become obsolete. + # + # Call this function from a postinst script after having used + # remove_conffile_prepare() in the preinst. + + #local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "remove_conffile_commit() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _conffile="$1" + + # if the temporary file created by remove_conffile_prepare() exists, remove it + if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then + observe "committing removal of obsolete conffile $_conffile" + rm "$_conffile.$THIS_PACKAGE-tmp" + fi +} + +remove_conffile_rollback () { + # syntax: remove_conffile_rollback filename + # + # Roll back the removal of a conffile "filename". + # + # Call this function from a postrm script in the event $1 is "abort-upgrade" + # or "abort-install" is after having used remove_conffile_prepare() in the + # preinst. + + #local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "remove_conffile_rollback() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _conffile="$1" + + # if the temporary file created by remove_conffile_prepare() exists, move it + # back + if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then + observe "rolling back removal of obsolete conffile $_conffile" + mv "$_conffile.$THIS_PACKAGE-tmp" "$_conffile" + fi +} + +replace_conffile_with_symlink_prepare () { + # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \ + # official_md5sum ... + # + # Check a conffile "oldfilename" against a list of canonical MD5 checksums. + # If the file's current MD5 checksum matches one of the "official_md5sum" + # operands provided, then prepare the conffile for removal from the system. + # We defer actual deletion until the package is configured so that we can + # roll this operation back if package installation fails. Otherwise copy it + # to newfilename and let dpkg handle it through conffiles mechanism. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install" and verify $2 to ensure the package is being upgraded from a + # version (or installed over a version removed-but-not-purged) prior to the + # one in which the conffile was obsoleted. + + #local conffile current_checksum + + # validate arguments + if [ $# -lt 3 ]; then + usage_error "replace_conffile_with_symlink_prepare() called with wrong" \ + " number of arguments; expected at least 3, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _oldconffile="$1" + shift + _newconffile="$1" + shift + + remove_conffile_prepare "$_oldconffile" "$@" + # If $_oldconffile still exists, then md5sums didn't match. + # Copy it to new one. + if [ -f "$_oldconffile" ]; then + cp "$_oldconffile" "$_newconffile" + fi + +} + +replace_conffile_with_symlink_commit () { + # syntax: replace_conffile_with_symlink_commit oldfilename + # + # Complete the removal of a conffile "oldfilename" that has been + # replaced by a symlink. + # + # Call this function from a postinst script after having used + # replace_conffile_with_symlink_prepare() in the preinst. + + #local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "replace_conffile_with_symlink_commit() called with wrong" \ + "number of arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _conffile="$1" + + remove_conffile_commit "$_conffile" +} + +replace_conffile_with_symlink_rollback () { + # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename + # + # Roll back the replacing of a conffile "oldfilename" with symlink to + # "newfilename". + # + # Call this function from a postrm script in the event $1 is "abort-upgrade" + # or "abort-install" and verify $2 to ensure the package failed to upgrade + # from a version (or install over a version removed-but-not-purged) prior + # to the one in which the conffile was obsoleted. + # You should have used replace_conffile_with_symlink_prepare() in the + # preinst. + + #local conffile + + # validate arguments + if [ $# -ne 2 ]; then + usage_error "replace_conffile_with_symlink_rollback() called with wrong" \ + "number of arguments; expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _oldconffile="$1" + _newconffile="$2" + + remove_conffile_rollback "$_oldconffile" + if [ -f "$_newconffile" ]; then + rm "$_newconffile" + fi +} + +run () { + # syntax: run command [ argument ... ] + # + # Run specified command with optional arguments and report its exit status. + # Useful for commands whose exit status may be nonzero, but still acceptable, + # or commands whose failure is not fatal to us. + # + # NOTE: Do *not* use this function with db_get or db_metaget commands; in + # those cases the return value of the debconf command *must* be checked + # before the string returned by debconf is used for anything. + + #local retval + + # validate arguments + if [ $# -lt 1 ]; then + usage_error "run() called with wrong number of arguments; expected at" \ + "least 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + "$@" || _retval=$? + + if [ ${_retval:-0} -ne 0 ]; then + observe "command \"$*\" exited with status $_retval" + fi +} + +register_x_lib_dir_with_ld_so () { + # syntax: register_x_lib_dir_with_ld_so + # + # Configure the dynamic loader ld.so to search /usr/X11R6/lib for shared + # libraries. + # + # Call this function from the postinst script of a package that places a + # shared library in /usr/X11R6/lib, before invoking ldconfig. + + #local dir ldsoconf + + _dir="/usr/X11R6/lib" + _ldsoconf="/etc/ld.so.conf" + + # is the line not already present? + if ! fgrep -qsx "$_dir" "$_ldsoconf"; then + observe "adding $_dir directory to $_ldsoconf" + echo "$_dir" >> "$_ldsoconf" + fi +} + +deregister_x_lib_dir_with_ld_so () { + # syntax: deregister_x_lib_dir_with_ld_so + # + # Configure dynamic loader ld.so to not search /usr/X11R6/lib for shared + # libraries, if and only if no shared libaries remain there. + # + # Call this function from the postrm script of a package that places a shared + # library in /usr/X11R6/lib, in the event "$1" is "remove", and before + # invoking ldconfig. + + #local dir ldsoconf fgrep_status cmp_status + + _dir="/usr/X11R6/lib" + _ldsoconf="/etc/ld.so.conf" + + # is the line present? + if fgrep -qsx "$_dir" "$_ldsoconf"; then + # are there any shared objects in the directory? + if [ "$(echo "$_dir"/lib*.so.*.*)" = "$_dir/lib*.so.*.*" ]; then + # glob expansion produced nothing, so no shared libraries are present + observe "removing $_dir directory from $_ldsoconf" + # rewrite the file (very carefully) + set +e + fgrep -svx "$_dir" "$_ldsoconf" > "$_ldsoconf.dpkg-tmp" + _fgrep_status=$? + set -e + case $_fgrep_status in + 0|1) ;; # we don't actually care if any lines matched or not + *) die "error reading \"$_ldsoconf\"; fgrep exited with status" \ + "$_fgrep_status" ;; + esac + set +e + cmp -s "$_ldsoconf.dpkg-tmp" "$_ldsoconf" + _cmp_status=$? + set -e + case $_cmp_status in + 0) rm "$_ldsoconf.dpkg-tmp" ;; # files are identical + 1) mv "$_ldsoconf.dpkg-tmp" "$_ldsoconf" ;; # files differ + *) die "error comparing \"$_ldsoconf.dpkg-tmp\" to \"$_ldsoconf\";" \ + "cmp exited with status $_cmp_status" ;; + esac + fi + fi +} + +make_symlink_sane () { + # syntax: make_symlink_sane symlink target + # + # Ensure that the symbolic link symlink exists, and points to target. + # + # If symlink does not exist, create it and point it at target. + # + # If symlink exists but is not a symbolic link, back it up. + # + # If symlink exists, is a symbolic link, but points to the wrong location, fix + # it. + # + # If symlink exists, is a symbolic link, and already points to target, do + # nothing. + # + # This function wouldn't be needed if ln had an -I, --idempotent option. + + # Validate arguments. + if [ $# -ne 2 ]; then + usage_error "make_symlink_sane() called with wrong number of arguments;" \ + "expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + # We could just use the positional parameters as-is, but that makes things + # harder to follow. + #local symlink target + + _symlink="$1" + _target="$2" + + if [ -L "$_symlink" ] && [ "$(readlink "$_symlink")" = "$_target" ]; then + observe "link from $_symlink to $_target already exists" + else + observe "creating symbolic link from $_symlink to $_target" + mkdir -p "${_target%/*}" "${_symlink%/*}" + ln -s -b -S ".dpkg-old" "$_target" "$_symlink" + fi +} + +migrate_dir_to_symlink () { + # syntax: migrate_dir_to_symlink old_location new_location + # + # Per Debian Policy section 6.5.4, "A directory will never be replaced by a + # symbolic link to a directory or vice versa; instead, the existing state + # (symlink or not) will be left alone and dpkg will follow the symlink if + # there is one." + # + # We have to do it ourselves. + # + # This function moves the contents of old_location, a directory, into + # new_location, a directory, then makes old_location a symbolic link to + # new_location. + # + # old_location need not exist, but if it does, it must be a directory (or a + # symlink to a directory). If it is not, it is backed up. If new_location + # exists already and is not a directory, it is backed up. + # + # This function should be called from a package's preinst so that other + # packages unpacked after this one --- but before this package's postinst runs + # --- are unpacked into new_location even if their payloads contain + # old_location filespecs. + + # Validate arguments. + if [ $# -ne 2 ]; then + usage_error "migrate_dir_to_symlink() called with wrong number of" + "arguments; expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + # We could just use the positional parameters as-is, but that makes things + # harder to follow. + local _new _old + + _old="$1" + _new="$2" + + # Is old location a symlink? + if [ -L "$_old" ]; then + # Does it already point to new location? + if [ "$(readlink "$_old")" = "$_new" ]; then + # Nothing to do; migration has already been done. + observe "migration of $_old to $_new already done" + return 0 + else + # Back it up. + warn "backing up symbolic link $_old as $_old.dpkg-old" + mv -b "$_old" "$_old.dpkg-old" + fi + fi + + # Does old location exist, but is not a directory? + if [ -e "$_old" ] && ! [ -d "$_old" ]; then + # Back it up. + warn "backing up non-directory $_old as $_old.dpkg-old" + mv -b "$_old" "$_old.dpkg-old" + fi + + observe "migrating $_old to $_new" + + # Is new location a symlink? + if [ -L "$_new" ]; then + # Does it point the wrong way, i.e., back to where we're migrating from? + if [ "$(readlink "$_new")" = "$_old" ]; then + # Get rid of it. + observe "removing symbolic link $_new which points to $_old" + rm "$_new" + else + # Back it up. + warn "backing up symbolic link $_new as $_new.dpkg-old" + mv -b "$_new" "$_new.dpkg-old" + fi + fi + + # Does new location exist, but is not a directory? + if [ -e "$_new" ] && ! [ -d "$_new" ]; then + warn "backing up non-directory $_new as $_new.dpkg-old" + mv -b "$_new" "$_new.dpkg-old" + fi + + # Create new directory if it does not yet exist. + if ! [ -e "$_new" ]; then + observe "creating $_new" + mkdir -p "$_new" + fi + + # Copy files in old location to new location. Back up any filenames that + # already exist in the new location with the extension ".dpkg-old". + observe "copying files from $_old to $_new" + if ! (cd "$_old" && cp -a -b -S ".dpkg-old" . "$_new"); then + die "error(s) encountered while copying files from $_old to $_new" + fi + + # Remove files at old location. + observe "removing $_old" + rm -r "$_old" + + # Create symlink from old location to new location. + make_symlink_sane "$_old" "$_new" +} + +# vim:set ai et sw=2 ts=2 tw=80: + +# GOBSTOPPER: The X Strike Force shell library ends here.