--- xserver-xorg-video-radeonhd-1.3.0.orig/README.coding +++ xserver-xorg-video-radeonhd-1.3.0/README.coding @@ -0,0 +1,124 @@ +Developer's Documentation +========================= + +This is a stub only ATM. Please fill in stuff as you find something out that +has been non-trivial (which means that you had to actually think about what +that piece of cra^H^Hode is actually doing). + +There is no explicit style guide ATM. Please consider to code in a similar way +as it is already done. Please add abstraction where it is useful, but don't +overdesign. The AtomBIOS layer is probably a bit overdesigned, but that has +only been understood when the code was already there and working fine. So we'll +keep it that way. + + +Source Code Layout +================== + +All source code files - they still need a oneliner as description... + + +General Stuff +------------- + +rhd.h +rhd_acpi.[ch] +rhd_audio.[ch] +rhd_card.h +rhd_connector.[ch] +rhd_crtc.[ch] +rhd_cursor.[ch] +rhd_driver.c +rhd_edid.c +rhd_hdmi.[ch] +rhd_helper.c +rhd_i2c.[ch] +rhd_id.c +rhd_lut.[ch] +rhd_mc.[ch] +rhd_modes.[ch] +rhd_monitor.[ch] +rhd_output.[ch] +rhd_pll.[ch] +rhd_pm.[ch] +rhd_randr.[ch] +rhd_vga.[ch] +rhd_video.[ch] + +Register Definitions +-------------------- + +r5xx_3dregs.h +r5xx_regs.h +r600_reg.h +r600_reg_auto_r6xx.h +r600_reg_r6xx.h +r600_reg_r7xx.h +rhd_regs.h + +AtomBIOS related +---------------- + +atombios_rev.h: Reverse engineered AtomBIOS table definitions +AtomBios/ +rhd_atombios.[ch] +rhd_atomcrtc.c +rhd_atomout.[ch] +rhd_atompll.c +rhd_atomwrapper.[ch] +rhd_biosscratch.[ch] + +Output Drivers +-------------- +rhd_dac.c +rhd_ddia.c +rhd_dig.c +rhd_lvtma.c +rhd_tmds.c + +Acceleration +------------ + +r5xx_accel.[ch] +r5xx_exa.c +r5xx_xaa.c +r600_exa.c +r600_shader.[ch] +r600_state.h +r600_textured_videofuncs.c +r6xx_accel.[ch] +radeon_exa_render.c +radeon_textured_videofuncs.c +rhd_cs.[ch] +rhd_shadow.[ch] + +3D Support +---------- + +radeon_3d.c +radeon_dri.h +radeon_drm.h +rhd_dri.[ch] + + +Digital blocks +============== + +There are 4 known digital output blocks you can meet on cards: +1) TMDSA (can transmit TMDS) +2) LVTMA (can transmit TMDS or LVDS) +3) DDIA (can transmit TMDS) +4) UNIPHY (can transmit TMDS or LVDS or DisplayPort's signal) + +TMDS signal is used for DVI and HDMI +LVDS signal is used for PANEL +DisplayPort's signal is used for DisplayPort of course + +Generally: +DDIA can be found on RS600, RS690 and RS740 +UNIPHY can be found on DCE 3+ devices (RV620+) +TMDSA can be found on rest of R5xx, R6xx + +Note there are cards with external DisplayPort chip which uses DVO +data protocol with an i2c control bus for communication with GPU + --- xserver-xorg-video-radeonhd-1.3.0.orig/autogen.sh +++ xserver-xorg-video-radeonhd-1.3.0/autogen.sh @@ -0,0 +1,13 @@ +#! /bin/sh + +srcdir=`dirname "$0"` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd "$srcdir" + +rm -rf autom4te.cache +autoreconf --force -v --install || exit 1 +cd "$ORIGDIR" || exit $? + +"$srcdir"/configure --enable-maintainer-mode "$@" --- xserver-xorg-video-radeonhd-1.3.0.orig/ChangeLog +++ xserver-xorg-video-radeonhd-1.3.0/ChangeLog @@ -9340,7 +9340,7 @@ Document Option "RROutputOrder" in man page commit 6419ace7fb8164a4c2d81f8b66e7571ff8279be7 -Merge: ed9065a... 29c9ea3... +Merge: ed9065a 29c9ea3 Author: Matthias Hopf Date: Wed Nov 21 16:06:25 2007 +0100 @@ -9468,7 +9468,7 @@ Nuke '..' from git id so copy/paste to gitk actually works. commit 99fbaeeb443b5474bb99f24541ebfe697484df0d -Merge: 4b20125... dbb073b... +Merge: 4b20125 dbb073b Author: Matthias Hopf Date: Mon Nov 19 20:55:44 2007 +0100 @@ -9648,7 +9648,7 @@ Moved header file inclusion (rhdConnectorType needed for rhd_output.h). commit ac7d8de963b654ced88c2740e0e0649ca6025133 -Merge: bf523a1... e9c24f6... +Merge: bf523a1 e9c24f6 Author: Matthias Hopf Date: Fri Nov 9 21:35:40 2007 +0100 @@ -10251,7 +10251,7 @@ Spell correction. commit cadce1be5a95aa734d42dccd698e02bbcf50df87 -Merge: 950d4ae... e518e62... +Merge: 950d4ae e518e62 Author: Matthias Hopf Date: Wed Oct 24 15:18:49 2007 +0200 @@ -11905,7 +11905,7 @@ Fix missing \n in rhdModeLayoutSelect commit ff6439181657f10f0b20255c2454d7fbf961610c -Merge: d9ef458... 48f0fb8... +Merge: d9ef458 48f0fb8 Author: Egbert Eich Date: Thu Sep 20 17:38:55 2007 +0200 --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/README.source +++ xserver-xorg-video-radeonhd-1.3.0/debian/README.source @@ -0,0 +1,73 @@ +------------------------------------------------------ +Quick Guide To Patching This Package For The Impatient +------------------------------------------------------ + +1. Make sure you have quilt installed +2. Unpack the package as usual with "dpkg-source -x" +3. Run the "patch" target in debian/rules +4. Create a new patch with "quilt new" (see quilt(1)) +5. Edit all the files you want to include in the patch with "quilt edit" + (see quilt(1)). +6. Write the patch with "quilt refresh" (see quilt(1)) +7. Run the "clean" target in debian/rules + +Alternatively, instead of using quilt directly, you can drop the patch in to +debian/patches and add the name of the patch to debian/patches/series. + +------------------------------------ +Guide To The X Strike Force Packages +------------------------------------ + +The X Strike Force team maintains X packages in git repositories on +git.debian.org in the pkg-xorg subdirectory. Most upstream packages +are actually maintained in git repositories as well, so they often +just need to be pulled into git.debian.org in a "upstream-*" branch. +Otherwise, the upstream sources are manually installed in the Debian +git repository. + +The .orig.tar.gz upstream source file could be generated this +"upstream-*" branch in the Debian git repository but it is actually +copied from upstream tarballs directly. + +Due to X.org being highly modular, packaging all X.org applications +as their own independent packages would have created too many Debian +packages. For this reason, some X.org applications have been grouped +into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils, +x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils. +Most packages, including the X.org server itself and all libraries +and drivers are, however maintained independently. + +The Debian packaging is added by creating the "debian-*" git branch +which contains the aforementioned "upstream-*" branch plus the debian/ +repository files. +When a patch has to be applied to the Debian package, two solutions +are involved: +* If the patch is available in one of the upstream branches, it + may be git'cherry-picked into the Debian repository. In this + case, it appears directly in the .diff.gz. +* Otherwise, the patch is added to debian/patches/ which is managed + with quilt as documented in /usr/share/doc/quilt/README.source. + +quilt is actually invoked by the Debian X packaging through a larger +set of scripts called XSFBS. XSFBS brings some other X specific +features such as managing dependencies and conflicts due to the video +and input driver ABIs. +XSFBS itself is maintained in a separate repository at + git://git.debian.org/pkg-xorg/xsfbs.git +and it is pulled inside the other Debian X repositories when needed. + +The XSFBS patching system requires a build dependency on quilt. Also +a dependency on $(STAMP_DIR)/patch has to be added to debian/rules +so that the XSFBS patching occurs before the actual build. So the +very first target of the build (likely the one running autoreconf) +should depend on $(STAMP_DIR)/patch. It should also not depend on +anything so that parallel builds are correctly supported (nothing +should probably run while patching is being done). And finally, the +clean target should depend on the xsfclean target so that patches +are unapplied on clean. + +When the upstream sources contain some DFSG-nonfree files, they are +listed in text files in debian/prune/ in the "debian-*" branch of +the Debian repository. XSFBS' scripts then take care of removing +these listed files during the build so as to generate a modified +DFSG-free .orig.tar.gz tarball. --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/xserver-xorg-video-radeonhd.install +++ xserver-xorg-video-radeonhd-1.3.0/debian/xserver-xorg-video-radeonhd.install @@ -0,0 +1,2 @@ +usr/lib/xorg/modules/drivers/*.so +usr/bin/rhd_conntest --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/xserver-xorg-video-radeonhd.links +++ xserver-xorg-video-radeonhd-1.3.0/debian/xserver-xorg-video-radeonhd.links @@ -0,0 +1 @@ +usr/share/bug/xserver-xorg-core/script usr/share/bug/xserver-xorg-video-radeonhd/script --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/rules +++ xserver-xorg-video-radeonhd-1.3.0/debian/rules @@ -0,0 +1,104 @@ +#!/usr/bin/make -f +# debian/rules for the Debian xserver-xorg-driver-radeonhd package. +# Copyright © 2004 Scott James Remnant +# Copyright © 2005 Daniel Stone +# Copyright © 2005 David Nusinow + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +PACKAGE = xserver-xorg-video-radeonhd + +include debian/xsfbs/xsfbs.mk + +CFLAGS = -Wall -g +ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif +ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) + NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) + MAKEFLAGS += -j$(NUMJOBS) +endif + +DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) +ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) + confflags += --build=$(DEB_HOST_GNU_TYPE) +else + confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE) +endif + +# kbd_drv.a isn't phenomenally useful; kbd_drv.so more so +confflags += --disable-static + +build: build-stamp +build-stamp: $(STAMP_DIR)/patch + dh_testdir + + autoreconf -vfi + + test -d obj-$(DEB_BUILD_GNU_TYPE) || mkdir obj-$(DEB_BUILD_GNU_TYPE) + cd obj-$(DEB_BUILD_GNU_TYPE) && \ + ../configure --prefix=/usr --mandir=\$${prefix}/share/man \ + --infodir=\$${prefix}/share/info $(confflags) \ + --enable-maintainer-mode \ + CFLAGS="$(CFLAGS)" + cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) + + touch build-stamp + +clean: xsfclean + dh_testdir + dh_testroot + rm -f build-stamp + + rm -f config.cache config.log config.status + rm -f */config.cache */config.log */config.status + rm -f conftest* */conftest* + rm -rf autom4te.cache */autom4te.cache + rm -rf obj-* + rm -rf configure config.guess config.sub config.h.in + rm -rf $$(find -name Makefile.in) + rm -rf aclocal.m4 missing depcomp install-sh ltmain.sh + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install + install -d -m 755 debian/tmp/usr/bin + install -m 755 obj-$(DEB_BUILD_GNU_TYPE)/utils/conntest/rhd_conntest debian/tmp/usr/bin/ + +# Build architecture-dependent files here. +binary-arch: install serverabi + dh_testdir + dh_testroot + + dh_installdocs README + dh_installchangelogs ChangeLog + dh_install --sourcedir=debian/tmp --list-missing --exclude=radeonhd_drv.la --exclude=usr/share/man/man4 + install -m 644 utils/conntest/README debian/$(PACKAGE)/usr/share/doc/$(PACKAGE)/README.rhd_conntest + dh_installman + dh_link + dh_strip --dbg-package=$(PACKAGE)-dbg + dh_compress + dh_fixperms + dh_installdeb + dh_shlibdeps -- --warnings=6 + dh_gencontrol + dh_md5sums + dh_builddeb + +# Build architecture-independent files here. +binary-indep: build install +# Nothing to do + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/watch +++ xserver-xorg-video-radeonhd-1.3.0/debian/watch @@ -0,0 +1,2 @@ +version=3 +http://xorg.freedesktop.org/releases/individual/driver/ xf86-video-radeonhd-(.*)\.tar\.gz --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/copyright +++ xserver-xorg-video-radeonhd-1.3.0/debian/copyright @@ -0,0 +1,32 @@ +This package was downloaded from +http://xorg.freedesktop.org/releases/individual/driver/ + +Files contained herein are distributed under the following license: + + * Copyright 2007 Luc Verhaegen + * Copyright 2007 Matthias Hopf + * Copyright 2007 Egbert Eich + * Copyright 2006, 2007 Advanced Micro Devices, Inc. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, sublicense, +and/or sell copies of the Software, and to permit persons to whom the +Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +All licensing questions regarding this software should be directed at the +Xorg mailing list: + +http://lists.freedesktop.org/mailman/listinfo/xorg --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/compat +++ xserver-xorg-video-radeonhd-1.3.0/debian/compat @@ -0,0 +1 @@ +5 --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/control +++ xserver-xorg-video-radeonhd-1.3.0/debian/control @@ -0,0 +1,71 @@ +Source: xserver-xorg-video-radeonhd +Section: x11 +Priority: optional +Maintainer: Debian X Strike Force +Uploaders: David Nusinow , Julien Cristau , Brice Goglin +Build-Depends: + debhelper (>= 5), + quilt, + pkg-config, + xserver-xorg-dev (>= 2:1.7), + x11proto-video-dev, + x11proto-fonts-dev, + x11proto-randr-dev (>= 1.2), + x11proto-render-dev, + automake, + autoconf, + libtool, + xutils-dev, + libpci-dev | pciutils-dev, + dpkg-dev (>= 1.14.17), + libdrm-dev [!hurd-i386], + x11proto-xf86dri-dev, + x11proto-gl-dev, + mesa-common-dev +Standards-Version: 3.8.3 +Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-video-radeonhd +Vcs-Browser: http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-video-radeonhd.git + +Package: xserver-xorg-video-radeonhd +Architecture: any +Depends: + ${shlibs:Depends}, + ${misc:Depends}, + ${xserver:Depends}, +Provides: ${xviddriver:Provides} +Suggests: firmware-linux +Description: X.Org X server -- AMD/ATI r5xx, r6xx display driver + This package provides the driver for the Radeon r5xx and r6xx family + of chipsets, including the X1550, X1300, X1550, X1600, FireGL V3300/V3350, + FireMV 2250, X1800, FireGL V5300/V7200/V7300/V7350, X1300 XT, X1600, + FireGL V3400/V5200 X1300, X1650, X1950 Pro/GT, X1650, X1900, X1950, + FireStream 2U, HD 2900 XT, HD 2400 Pro/XT, HD 2600 Pro/XT, Mobility X1300, + X1350, Mobility X1400, X1450, X2300, Mobility X1600, X1700, Mobility + FireGL V5200, V5250, Mobility X1800, X1900, Mobility FireGL V7100, V7200, + Mobility HD 2300, Mobility HD 2400, Mobility HD 2600, and Radeon X1200. + . + More information about X.Org can be found at: + + + + . + This package is built from the X.org xf86-video-radeonhd driver module. + +Package: xserver-xorg-video-radeonhd-dbg +Architecture: any +Depends: + ${misc:Depends}, + xserver-xorg-video-radeonhd (= ${binary:Version}), +Section: debug +Priority: extra +Description: X.Org X server -- AMD/ATI r5xx, r6xx display driver + This package provides the driver for the Radeon r5xx and r6xx family + of chipsets, including the X1550, X1300, X1550, X1600, FireGL V3300/V3350, + FireMV 2250, X1800, FireGL V5300/V7200/V7300/V7350, X1300 XT, X1600, + FireGL V3400/V5200 X1300, X1650, X1950 Pro/GT, X1650, X1900, X1950, + FireStream 2U, HD 2900 XT, HD 2400 Pro/XT, HD 2600 Pro/XT, Mobility X1300, + X1350, Mobility X1400, X1450, X2300, Mobility X1600, X1700, Mobility + FireGL V5200, V5250, Mobility X1800, X1900, Mobility FireGL V7100, V7200, + Mobility HD 2300, Mobility HD 2400, Mobility HD 2600, and Radeon X1200. + . + This package provides debugging symbols for this Xorg X driver. --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/xserver-xorg-video-radeonhd.manpages +++ xserver-xorg-video-radeonhd-1.3.0/debian/xserver-xorg-video-radeonhd.manpages @@ -0,0 +1 @@ +debian/tmp/usr/share/man/man4/* --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/changelog +++ xserver-xorg-video-radeonhd-1.3.0/debian/changelog @@ -0,0 +1,157 @@ +xserver-xorg-video-radeonhd (1.3.0-2) unstable; urgency=low + + * Add ${misc:Depends} to xserver-xorg-video-radeonhd-dbg's Depends. + * Wrap all Depends while I'm at it. + * Upload to unstable. + + -- Cyril Brulebois Fri, 08 Jan 2010 01:44:43 +0100 + +xserver-xorg-video-radeonhd (1.3.0-1) experimental; urgency=low + + [ Brice Goglin ] + * xserver-xorg-video-radeonhd now suggests firmware-linux since + a firmware may be needed to initialize DRI. + * Move -dbg package to section debug. + * Build against Xserver 1.7. + + [ Timo Aaltonen ] + * New upstream release, closes: #554258. + + Fix FB mapping cleanup to reflect changes to allocation, + closes: #503001. + * Bump Standards-Version to 3.8.3. + + -- Brice Goglin Thu, 03 Dec 2009 18:09:30 +0100 + +xserver-xorg-video-radeonhd (1.2.5-1) unstable; urgency=low + + * New upstream release. + + -- Brice Goglin Fri, 10 Apr 2009 08:09:08 +0200 + +xserver-xorg-video-radeonhd (1.2.4-3) unstable; urgency=low + + * Don't install a pci id list. Should make Xorg consistently pick the + radeon driver unless radeonhd is explicitly chosen in xorg.conf. + * Upload to unstable. + + -- Julien Cristau Thu, 09 Apr 2009 10:48:36 +0100 + +xserver-xorg-video-radeonhd (1.2.4-2) experimental; urgency=low + + * Build against xserver 1.6 rc1. + + -- Brice Goglin Sun, 01 Feb 2009 14:22:45 +0100 + +xserver-xorg-video-radeonhd (1.2.4-1) experimental; urgency=low + + * New upstream release. + * Add myself to Uploaders. + + -- Brice Goglin Thu, 25 Dec 2008 17:20:14 +0100 + +xserver-xorg-video-radeonhd (1.2.3-1) experimental; urgency=low + + * New upstream release. + * Build-depend on libdrm-dev, x11proto-xf86dri-dev, x11proto-gl-dev and + mesa-common-dev to enable DRI. + * Cherry-pick commit e7abdfc0 to fix build for big endian. + * Enable parallel builds using DEB_BUILD_OPTIONS. + + -- Julien Cristau Sun, 19 Oct 2008 21:13:52 +0200 + +xserver-xorg-video-radeonhd (1.2.1-3) experimental; urgency=low + + * Build against xserver 1.5. + + -- Julien Cristau Tue, 09 Sep 2008 23:26:18 +0100 + +xserver-xorg-video-radeonhd (1.2.1-2) unstable; urgency=low + + * Install the upstream README files for the driver and for rhd_conntest in + the package. + * Build-depend on dpkg-dev >= 1.14.17 for dpkg-shlibdeps --warnings + (closes: #477433). + * Change pciutils-dev build-dep to libpci-dev for gratuitous name change. + * Cherry-pick patch applied upstream to fix FTBFS on hurd and kfreebsd. + + -- Julien Cristau Sun, 11 May 2008 13:00:30 +0200 + +xserver-xorg-video-radeonhd (1.2.1-1) unstable; urgency=low + + * New upstream release. + * Refresh patch 01_gen_pci_ids.diff. + * Run dpkg-shlibdeps with --warnings=6. Drivers reference symbols from + /usr/bin/Xorg and other modules, and that's not a bug, so we want + dpkg-shlibdeps to shut up about symbols it can't find. + * Build-depend on pciutils-dev, so we can build and install the rhd_conntest + utility. + + -- Julien Cristau Sun, 20 Apr 2008 22:09:06 +0200 + +xserver-xorg-video-radeonhd (1.2.0-1) unstable; urgency=low + + * New upstream release. + * Update the upstream ChangeLog, closes: #457426. + * Bump Standards-Version to 3.7.3. + * Drop the XS- prefix from Vcs-* control fields. + + -- Brice Goglin Fri, 11 Apr 2008 08:24:17 +0200 + +xserver-xorg-video-radeonhd (1.1.0-1) unstable; urgency=low + + * New upstream release. + + Fix crash in ChangeWindowAttributes(), closes: #447808. + + Fix crash in InitOutput(), closes: #454228. + + -- Brice Goglin Fri, 21 Dec 2007 17:54:54 +0100 + +xserver-xorg-video-radeonhd (1.0.0-1) unstable; urgency=low + + * First upstream release. + * Refresh patch 01_gen_pci_ids.diff. + * Upload to unstable (closes: #453524). + + -- Julien Cristau Sat, 01 Dec 2007 13:44:52 +0100 + +xserver-xorg-video-radeonhd (0.0.4~git20071124-1) experimental; urgency=low + + * Bring back the changes from 0.0.1+git20070920-2 which were missing from + 0.0.1+git20071006-1. + * New git snapshot. + + adds RandR 1.2 support + * Adapt patch 01_gen_pci_ids.diff to new upstream. + * Remove autotools-generated files from the package and regenerate them at + build time. Build-dep on automake, autoconf, libtool, xutils-dev. + + -- Julien Cristau Sat, 24 Nov 2007 23:06:47 +0100 + +xserver-xorg-video-radeonhd (0.0.1+git20071006-1) experimental; urgency=low + + * New upstream release + + Provides support for the MacBook Pro. Thanks Matt Kraai. closes: #445551 + + -- David Nusinow Sat, 06 Oct 2007 18:18:49 -0400 + +xserver-xorg-video-radeonhd (0.0.1+git20070920-2) experimental; urgency=low + + * chmod +x configure in debian/rules clean, to fix FTBFS. Thanks, Luk + Claes! + * Add the upstream changelog. + * Add myself to Uploaders. + + -- Julien Cristau Sat, 22 Sep 2007 17:59:45 +0200 + +xserver-xorg-video-radeonhd (0.0.1+git20070920-1) experimental; urgency=low + + * New upstream release + * Get rid of leftover cruft in the -dbg package's description, + closes: #443312. + * Change arch to any; closes: #443302 + + -- David Nusinow Thu, 20 Sep 2007 21:24:10 -0400 + +xserver-xorg-video-radeonhd (0.0.1+git20070918-1) experimental; urgency=low + + * Upload to experimental + + -- David Nusinow Tue, 18 Sep 2007 22:02:36 -0400 --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/xsfbs/repack.sh +++ xserver-xorg-video-radeonhd-1.3.0/debian/xsfbs/repack.sh @@ -0,0 +1,32 @@ +#!/bin/sh + +set -e + +if ! [ -d debian/prune ]; then + exit 0 +fi + +if [ "x$1" != x--upstream-version ]; then + exit 1 +fi + +version="$2" +filename="$3" + +if [ -z "$version" ] || ! [ -f "$filename" ]; then + exit 1 +fi + +dir="$(pwd)" +tempdir="$(mktemp -d)" + +cd "$tempdir" +tar xf "$dir/$filename" +cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done + +tar czf "$dir/$filename" * +cd "$dir" +rm -rf "$tempdir" +echo "Done pruning upstream tarball" + +exit 0 --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/xsfbs/xsfbs.sh +++ xserver-xorg-video-radeonhd-1.3.0/debian/xsfbs/xsfbs.sh @@ -0,0 +1,622 @@ +# This is the X Strike Force shell library for X Window System package +# maintainer scripts. It serves to define shell functions commonly used by +# such packages, and performs some error checking necessary for proper operation +# of those functions. By itself, it does not "do" much; the maintainer scripts +# invoke the functions defined here to accomplish package installation and +# removal tasks. + +# If you are reading this within a Debian package maintainer script (e.g., +# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can +# skip past this library by scanning forward in this file to the string +# "GOBSTOPPER". + +SOURCE_VERSION=@SOURCE_VERSION@ +OFFICIAL_BUILD=@OFFICIAL_BUILD@ + +# Use special abnormal exit codes so that problems with this library are more +# easily tracked down. +SHELL_LIB_INTERNAL_ERROR=86 +SHELL_LIB_THROWN_ERROR=74 +SHELL_LIB_USAGE_ERROR=99 + +# old -> new variable names +if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then + DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE" +fi +if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then + DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF" +fi + +# initial sanity checks +if [ -z "$THIS_PACKAGE" ]; then + cat >&2 < on the World Wide Web for +instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the +"doc-debian" package, or install the "reportbug" package and use the command of +the same name to file a report against version $SOURCE_VERSION of this package. +EOF + exit $SHELL_LIB_USAGE_ERROR +fi + +if [ -z "$THIS_SCRIPT" ]; then + cat >&2 < on the World Wide Web for +instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the +"doc-debian" package, or install the "reportbug" package and use the command of +the same name to file a report against version $SOURCE_VERSION of the +"$THIS_PACKAGE" package. +EOF + exit $SHELL_LIB_USAGE_ERROR +fi + +if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then + RECONFIGURE="true" +else + RECONFIGURE= +fi + +if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then + FIRSTINST="yes" +fi + +if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then + UPGRADE="yes" +fi + +trap "message;\ + message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\ + message;\ + exit 1" HUP INT QUIT TERM + +reject_nondigits () { + # syntax: reject_nondigits [ operand ... ] + # + # scan operands (typically shell variables whose values cannot be trusted) for + # characters other than decimal digits and barf if any are found + while [ -n "$1" ]; do + # does the operand contain anything but digits? + if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then + # can't use die(), because it wraps message() which wraps this function + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \ + "possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + shift + done +} + +reject_unlikely_path_chars () { + # syntax: reject_unlikely_path_chars [ operand ... ] + # + # scan operands (typically shell variables whose values cannot be trusted) for + # characters unlikely to be seen in a path and which the shell might + # interpret and barf if any are found + while [ -n "$1" ]; do + # does the operand contain any funny characters? + if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then + # can't use die(), because I want to avoid forward references + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \ + "encountered possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + shift + done +} + +# Query the terminal to establish a default number of columns to use for +# displaying messages to the user. This is used only as a fallback in the +# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while +# the script is running, and this cannot, only being calculated once.) +DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true +if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then + DEFCOLUMNS=80 +fi + +message () { + # pretty-print messages of arbitrary length + reject_nondigits "$COLUMNS" + echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2 +} + +observe () { + # syntax: observe message ... + # + # issue observational message suitable for logging someday when support for + # it exists in dpkg + if [ -n "$DEBUG_XORG_PACKAGE" ]; then + message "$THIS_PACKAGE $THIS_SCRIPT note: $*" + fi +} + +warn () { + # syntax: warn message ... + # + # issue warning message suitable for logging someday when support for + # it exists in dpkg; also send to standard error + message "$THIS_PACKAGE $THIS_SCRIPT warning: $*" +} + +die () { + # syntax: die message ... + # + # exit script with error message + message "$THIS_PACKAGE $THIS_SCRIPT error: $*" + exit $SHELL_LIB_THROWN_ERROR +} + +internal_error () { + # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message + message "internal error: $*" + if [ -n "$OFFICIAL_BUILD" ]; then + message "Please report a bug in the $THIS_SCRIPT script of the" \ + "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ + "Tracking System. Include all messages above that mention the" \ + "$THIS_PACKAGE package. Visit " \ + " on the World Wide Web for" \ + "instructions, read the file" \ + "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ + "package, or install the reportbug package and use the command of" \ + "the same name to file a report." + fi + exit $SHELL_LIB_INTERNAL_ERROR +} + +usage_error () { + message "usage error: $*" + message "Please report a bug in the $THIS_SCRIPT script of the" \ + "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ + "Tracking System. Include all messages above that mention the" \ + "$THIS_PACKAGE package. Visit " \ + " on the World Wide Web for" \ + "instructions, read the file" \ + "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ + "package, or install the reportbug package and use the command of" \ + "the same name to file a report." + exit $SHELL_LIB_USAGE_ERROR +} + +font_update () { + # run $UPDATECMDS in $FONTDIRS + + local dir cmd shortcmd x_font_dir_prefix + + x_font_dir_prefix="/usr/share/fonts/X11" + + if [ -z "$UPDATECMDS" ]; then + usage_error "font_update() called but \$UPDATECMDS not set" + fi + if [ -z "$FONTDIRS" ]; then + usage_error "font_update() called but \$FONTDIRS not set" + fi + + reject_unlikely_path_chars "$UPDATECMDS" + reject_unlikely_path_chars "$FONTDIRS" + + for dir in $FONTDIRS; do + if [ -d "$x_font_dir_prefix/$dir" ]; then + for cmd in $UPDATECMDS; do + if which "$cmd" > /dev/null 2>&1; then + shortcmd=${cmd##*/} + observe "running $shortcmd in $dir font directory" + cmd_opts= + if [ "$shortcmd" = "update-fonts-alias" ]; then + cmd_opts=--x11r7-layout + fi + if [ "$shortcmd" = "update-fonts-dir" ]; then + cmd_opts=--x11r7-layout + fi + if [ "$shortcmd" = "update-fonts-scale" ]; then + cmd_opts=--x11r7-layout + fi + $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \ + "failed; font directory data may not" \ + "be up to date" + else + warn "$cmd not found; not updating corresponding $dir font" \ + "directory data" + fi + done + else + warn "$dir is not a directory; not updating font directory data" + fi + done +} + +remove_conffile_prepare () { + # syntax: remove_conffile_prepare filename official_md5sum ... + # + # Check a conffile "filename" against a list of canonical MD5 checksums. + # If the file's current MD5 checksum matches one of the "official_md5sum" + # operands provided, then prepare the conffile for removal from the system. + # We defer actual deletion until the package is configured so that we can + # roll this operation back if package installation fails. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install" and verify $2 to ensure the package is being upgraded from a + # version (or installed over a version removed-but-not-purged) prior to the + # one in which the conffile was obsoleted. + + local conffile current_checksum + + # validate arguments + if [ $# -lt 2 ]; then + usage_error "remove_conffile_prepare() called with wrong number of" \ + "arguments; expected at least 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + shift + + # does the conffile even exist? + if [ -e "$conffile" ]; then + # calculate its checksum + current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//') + # compare it to each supplied checksum + while [ -n "$1" ]; do + if [ "$current_checksum" = "$1" ]; then + # we found a match; move the confffile and stop looking + observe "preparing obsolete conffile $conffile for removal" + mv "$conffile" "$conffile.$THIS_PACKAGE-tmp" + break + fi + shift + done + fi +} + +remove_conffile_lookup () { + # syntax: remove_conffile_lookup package filename + # + # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal + # if it matches the actual file's md5sum. + # + # Call this function when you would call remove_conffile_prepare but only + # want to check against dpkg's status database instead of known checksums. + + local package conffile old_md5sum + + # validate arguments + if [ $# -ne 2 ]; then + usage_error "remove_conffile_lookup() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + package="$1" + conffile="$2" + + if ! [ -e "$conffile" ]; then + return + fi + old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \ + awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')" + if [ -n "$old_md5sum" ]; then + remove_conffile_prepare "$conffile" "$old_md5sum" + fi +} + +remove_conffile_commit () { + # syntax: remove_conffile_commit filename + # + # Complete the removal of a conffile "filename" that has become obsolete. + # + # Call this function from a postinst script after having used + # remove_conffile_prepare() in the preinst. + + local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "remove_conffile_commit() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + + # if the temporary file created by remove_conffile_prepare() exists, remove it + if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then + observe "committing removal of obsolete conffile $conffile" + rm "$conffile.$THIS_PACKAGE-tmp" + fi +} + +remove_conffile_rollback () { + # syntax: remove_conffile_rollback filename + # + # Roll back the removal of a conffile "filename". + # + # Call this function from a postrm script in the event $1 is "abort-upgrade" + # or "abort-install" is after having used remove_conffile_prepare() in the + # preinst. + + local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "remove_conffile_rollback() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + + # if the temporary file created by remove_conffile_prepare() exists, move it + # back + if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then + observe "rolling back removal of obsolete conffile $conffile" + mv "$conffile.$THIS_PACKAGE-tmp" "$conffile" + fi +} + +replace_conffile_with_symlink_prepare () { + # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \ + # official_md5sum ... + # + # Check a conffile "oldfilename" against a list of canonical MD5 checksums. + # If the file's current MD5 checksum matches one of the "official_md5sum" + # operands provided, then prepare the conffile for removal from the system. + # We defer actual deletion until the package is configured so that we can + # roll this operation back if package installation fails. Otherwise copy it + # to newfilename and let dpkg handle it through conffiles mechanism. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install" and verify $2 to ensure the package is being upgraded from a + # version (or installed over a version removed-but-not-purged) prior to the + # one in which the conffile was obsoleted. + + local conffile current_checksum + + # validate arguments + if [ $# -lt 3 ]; then + usage_error "replace_conffile_with_symlink_prepare() called with wrong" \ + " number of arguments; expected at least 3, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + oldconffile="$1" + shift + newconffile="$1" + shift + + remove_conffile_prepare "$_oldconffile" "$@" + # If $oldconffile still exists, then md5sums didn't match. + # Copy it to new one. + if [ -f "$oldconffile" ]; then + cp "$oldconffile" "$newconffile" + fi + +} + +replace_conffile_with_symlink_commit () { + # syntax: replace_conffile_with_symlink_commit oldfilename + # + # Complete the removal of a conffile "oldfilename" that has been + # replaced by a symlink. + # + # Call this function from a postinst script after having used + # replace_conffile_with_symlink_prepare() in the preinst. + + local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "replace_conffile_with_symlink_commit() called with wrong" \ + "number of arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + + remove_conffile_commit "$conffile" +} + +replace_conffile_with_symlink_rollback () { + # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename + # + # Roll back the replacing of a conffile "oldfilename" with symlink to + # "newfilename". + # + # Call this function from a postrm script in the event $1 is "abort-upgrade" + # or "abort-install" and verify $2 to ensure the package failed to upgrade + # from a version (or install over a version removed-but-not-purged) prior + # to the one in which the conffile was obsoleted. + # You should have used replace_conffile_with_symlink_prepare() in the + # preinst. + + local conffile + + # validate arguments + if [ $# -ne 2 ]; then + usage_error "replace_conffile_with_symlink_rollback() called with wrong" \ + "number of arguments; expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + oldconffile="$1" + newconffile="$2" + + remove_conffile_rollback "$_oldconffile" + if [ -f "$newconffile" ]; then + rm "$newconffile" + fi +} + +run () { + # syntax: run command [ argument ... ] + # + # Run specified command with optional arguments and report its exit status. + # Useful for commands whose exit status may be nonzero, but still acceptable, + # or commands whose failure is not fatal to us. + # + # NOTE: Do *not* use this function with db_get or db_metaget commands; in + # those cases the return value of the debconf command *must* be checked + # before the string returned by debconf is used for anything. + + local retval + + # validate arguments + if [ $# -lt 1 ]; then + usage_error "run() called with wrong number of arguments; expected at" \ + "least 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + "$@" || retval=$? + + if [ ${retval:-0} -ne 0 ]; then + observe "command \"$*\" exited with status $retval" + fi +} + +make_symlink_sane () { + # syntax: make_symlink_sane symlink target + # + # Ensure that the symbolic link symlink exists, and points to target. + # + # If symlink does not exist, create it and point it at target. + # + # If symlink exists but is not a symbolic link, back it up. + # + # If symlink exists, is a symbolic link, but points to the wrong location, fix + # it. + # + # If symlink exists, is a symbolic link, and already points to target, do + # nothing. + # + # This function wouldn't be needed if ln had an -I, --idempotent option. + + # Validate arguments. + if [ $# -ne 2 ]; then + usage_error "make_symlink_sane() called with wrong number of arguments;" \ + "expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + # We could just use the positional parameters as-is, but that makes things + # harder to follow. + local symlink target + + symlink="$1" + target="$2" + + if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then + observe "link from $symlink to $target already exists" + else + observe "creating symbolic link from $symlink to $target" + mkdir -p "${target%/*}" "${symlink%/*}" + ln -s -b -S ".dpkg-old" "$target" "$symlink" + fi +} + +migrate_dir_to_symlink () { + # syntax: migrate_dir_to_symlink old_location new_location + # + # Per Debian Policy section 6.5.4, "A directory will never be replaced by a + # symbolic link to a directory or vice versa; instead, the existing state + # (symlink or not) will be left alone and dpkg will follow the symlink if + # there is one." + # + # We have to do it ourselves. + # + # This function moves the contents of old_location, a directory, into + # new_location, a directory, then makes old_location a symbolic link to + # new_location. + # + # old_location need not exist, but if it does, it must be a directory (or a + # symlink to a directory). If it is not, it is backed up. If new_location + # exists already and is not a directory, it is backed up. + # + # This function should be called from a package's preinst so that other + # packages unpacked after this one --- but before this package's postinst runs + # --- are unpacked into new_location even if their payloads contain + # old_location filespecs. + + # Validate arguments. + if [ $# -ne 2 ]; then + usage_error "migrate_dir_to_symlink() called with wrong number of" + "arguments; expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + # We could just use the positional parameters as-is, but that makes things + # harder to follow. + local new old + + old="$1" + new="$2" + + # Is old location a symlink? + if [ -L "$old" ]; then + # Does it already point to new location? + if [ "$(readlink "$old")" = "$new" ]; then + # Nothing to do; migration has already been done. + observe "migration of $old to $new already done" + return 0 + else + # Back it up. + warn "backing up symbolic link $old as $old.dpkg-old" + mv -b "$old" "$old.dpkg-old" + fi + fi + + # Does old location exist, but is not a directory? + if [ -e "$old" ] && ! [ -d "$old" ]; then + # Back it up. + warn "backing up non-directory $old as $old.dpkg-old" + mv -b "$old" "$old.dpkg-old" + fi + + observe "migrating $old to $new" + + # Is new location a symlink? + if [ -L "$new" ]; then + # Does it point the wrong way, i.e., back to where we're migrating from? + if [ "$(readlink "$new")" = "$old" ]; then + # Get rid of it. + observe "removing symbolic link $new which points to $old" + rm "$new" + else + # Back it up. + warn "backing up symbolic link $new as $new.dpkg-old" + mv -b "$new" "$new.dpkg-old" + fi + fi + + # Does new location exist, but is not a directory? + if [ -e "$new" ] && ! [ -d "$new" ]; then + warn "backing up non-directory $new as $new.dpkg-old" + mv -b "$new" "$new.dpkg-old" + fi + + # Create new directory if it does not yet exist. + if ! [ -e "$new" ]; then + observe "creating $new" + mkdir -p "$new" + fi + + # Copy files in old location to new location. Back up any filenames that + # already exist in the new location with the extension ".dpkg-old". + observe "copying files from $old to $new" + if ! (cd "$old" && cp -a -b -S ".dpkg-old" . "$new"); then + die "error(s) encountered while copying files from $old to $new" + fi + + # Remove files at old location. + observe "removing $old" + rm -r "$old" + + # Create symlink from old location to new location. + make_symlink_sane "$old" "$new" +} + +# vim:set ai et sw=2 ts=2 tw=80: + +# GOBSTOPPER: The X Strike Force shell library ends here. --- xserver-xorg-video-radeonhd-1.3.0.orig/debian/xsfbs/xsfbs.mk +++ xserver-xorg-video-radeonhd-1.3.0/debian/xsfbs/xsfbs.mk @@ -0,0 +1,276 @@ +#!/usr/bin/make -f + +# Debian X Strike Force Build System (XSFBS): Make portion + +# Copyright 1996 Stephen Early +# Copyright 1997 Mark Eichin +# Copyright 1998-2005, 2007 Branden Robinson +# Copyright 2005 David Nusinow +# +# Licensed under the GNU General Public License, version 2. See the file +# /usr/share/common-licenses/GPL or . + +# Originally by Stephen Early +# Modified by Mark W. Eichin +# Modified by Adam Heath +# Modified by Branden Robinson +# Modified by Fabio Massimo Di Nitto +# Modified by David Nusinow +# Acknowledgements to Manoj Srivastava. + +# Pass $(DH_OPTIONS) into the environment for debhelper's benefit. +export DH_OPTIONS + +# force quilt to not use ~/.quiltrc and to use debian/patches +QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null + +# Set up parameters for the upstream build environment. + +# Determine (source) package name from Debian changelog. +SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \ + | grep '^Source:' | awk '{print $$2}') + +# Determine package version from Debian changelog. +SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \ + | grep '^Version:' | awk '{print $$2}') + +# Determine upstream version number. +UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//') + +# Determine the source version without the epoch for make-orig-tar-gz +NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://') + +# Figure out who's building this package. +BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}}) + +# Find out if this is an official build; an official build has nothing but +# digits, dots, and/or the codename of a release in the Debian part of the +# version number. Anything else indicates an unofficial build. +OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi) + +# Set up parameters for the Debian build environment. + +# Determine our architecture. +BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH) +# Work around some old-time dpkg braindamage. +BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH)) +# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy. +ifdef DEB_HOST_ARCH + ARCH:=$(DEB_HOST_ARCH) +else + # dpkg-cross sets the ARCH environment variable; if set, use it. + ifdef ARCH + ARCH:=$(ARCH) + else + ARCH:=$(BUILD_ARCH) + endif +endif + +# $(STAMP_DIR) houses stamp files for complex targets. +STAMP_DIR:=stampdir + +# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place +# their files. +DEBTREEDIR:=$(CURDIR)/debian/tmp + +# All "important" targets have four lines: +# 1) A target name that is invoked by a package-building tool or the user. +# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart. +# 2) A line delcaring 1) as a phony target (".PHONY:"). +# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may +# depend on other targets. +# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the +# "$(STAMP_DIR)/" prefix is omitted. +# +# This indirection is needed so that the "stamp" files that signify when a rule +# is done can be located in a separate "stampdir". Recall that make has no way +# to know when a goal has been met for a phony target (like "build" or +# "install"). +# +# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@" +# so that the target will not be run again. Removing the file will make Make +# run the target over. + +# All phony targets should be declared as dependencies of .PHONY, even if they +# do not have "($STAMP_DIR)/"-prefixed counterparts. + +# Define a harmless default rule to keep things from going nuts by accident. +.PHONY: default +default: + +# Set up the $(STAMP_DIR) directory. +.PHONY: stampdir +stampdir_targets+=stampdir +stampdir: $(STAMP_DIR)/stampdir +$(STAMP_DIR)/stampdir: + mkdir $(STAMP_DIR) + >$@ + +# Set up the package build directory as quilt expects to find it. +.PHONY: prepare +stampdir_targets+=prepare +prepare: $(STAMP_DIR)/prepare +$(STAMP_DIR)/prepare: $(STAMP_DIR)/log $(STAMP_DIR)/genscripts + >$@ + +.PHONY: log +stampdir_targets+=log +log: $(STAMP_DIR)/log +$(STAMP_DIR)/log: $(STAMP_DIR)/stampdir + mkdir -p $(STAMP_DIR)/log + +# Apply all patches to the upstream source. +.PHONY: patch +stampdir_targets+=patch +patch: $(STAMP_DIR)/patch +$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare + if ! [ `which quilt` ]; then \ + echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \ + exit 1; \ + fi; \ + if $(QUILT) next >/dev/null 2>&1; then \ + echo -n "Applying patches..."; \ + if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \ + cat $(STAMP_DIR)/log/patch; \ + echo "successful."; \ + else \ + cat $(STAMP_DIR)/log/patch; \ + echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \ + exit 1; \ + fi; \ + else \ + echo "No patches to apply"; \ + fi; \ + >$@ + +# Revert all patches to the upstream source. +.PHONY: unpatch +unpatch: $(STAMP_DIR)/log + rm -f $(STAMP_DIR)/patch + @echo -n "Unapplying patches..."; \ + if $(QUILT) applied >/dev/null 2>/dev/null; then \ + if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \ + cat $(STAMP_DIR)/log/unpatch; \ + echo "successful."; \ + else \ + cat $(STAMP_DIR)/log/unpatch; \ + echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \ + exit 1; \ + fi; \ + else \ + echo "nothing to do."; \ + fi + +# Clean the generated maintainer scripts. +.PHONY: cleanscripts +cleanscripts: + rm -f $(STAMP_DIR)/genscripts + rm -f debian/*.config \ + debian/*.postinst \ + debian/*.postrm \ + debian/*.preinst \ + debian/*.prerm + +# Clean the package build tree. +.PHONY: xsfclean +xsfclean: cleanscripts unpatch + dh_testdir + rm -rf .pc + rm -rf $(STAMP_DIR) + dh_clean + +# Remove files from the upstream source tree that we don't need, or which have +# licensing problems. It must be run before creating the .orig.tar.gz. +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +.PHONY: prune-upstream-tree +prune-upstream-tree: + # Ensure we're in the correct directory. + dh_testdir + grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf + +# Verify that there are no offsets or fuzz in the patches we apply. +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +.PHONY: patch-audit +patch-audit: prepare unpatch + @echo -n "Auditing patches..."; \ + >$(STAMP_DIR)/log/patch; \ + FUZZY=; \ + while [ -n "$$($(QUILT) next)" ]; do \ + RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\ + case "$$RESULT" in \ + succeeded) \ + echo "fuzzy patch: $$($(QUILT) top)" \ + | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \ + FUZZY=yes; \ + ;; \ + FAILED) \ + echo "broken patch: $$($(QUILT) next)" \ + | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \ + exit 1; \ + ;; \ + esac; \ + done; \ + if [ -n "$$FUZZY" ]; then \ + echo "there were fuzzy patches; please fix."; \ + exit 1; \ + else \ + echo "done."; \ + fi + +# Generate the maintainer scripts. +.PHONY: genscripts +stampdir_targets+=genscripts +genscripts: $(STAMP_DIR)/genscripts +$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir + for FILE in debian/*.config.in \ + debian/*.postinst.in \ + debian/*.postrm.in \ + debian/*.preinst.in \ + debian/*.prerm.in; do \ + if [ -e "$$FILE" ]; then \ + MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \ + sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \ + | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \ + cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \ + sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \ + | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \ + sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \ + -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \ + <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \ + rm $$MAINTSCRIPT.tmp; \ + fi; \ + done + # Validate syntax of generated shell scripts. + #sh debian/scripts/validate-posix-sh debian/*.config \ + # debian/*.postinst \ + # debian/*.postrm \ + # debian/*.preinst \ + # debian/*.prerm + >$@ + +SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null) +VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null) +INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null) +SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS)) +VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI) +INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI) +ifeq ($(PACKAGE),) +PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control) +endif + +.PHONY: serverabi +serverabi: install +ifeq ($(SERVERMINVERS),) + @echo error: xserver-xorg-dev needs to be installed + @exit 1 +else + echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars + echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars + echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars +endif + +# vim:set noet ai sts=8 sw=8 tw=0: