RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '783074-1839887', '/home/buildd/filecache-default/05ed72be0d6b3618e2e22266fc9a300b75f69100'] Synching the system clock with the buildd NTP service... 3 Dec 08:46:04 ntpdate[24564]: adjust time server 10.211.37.1 offset 0.000812 sec Unpacking chroot for build 783074-1839887 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '783074-1839887'] Mounting chroot for build 783074-1839887 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '783074-1839887', 'universe'] Attempting OGRE for universe in build-783074-1839887 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '783074-1839887', 'deb http://ftpmaster.internal/ubuntu jaunty main universe'] Overriding sources.list in build-783074-1839887 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '783074-1839887'] Updating debian chroot for build 783074-1839887 Get:1 http://ftpmaster.internal jaunty Release.gpg [189B] Get:2 http://ftpmaster.internal jaunty Release [74.6kB] Ign http://ftpmaster.internal jaunty/main Packages/DiffIndex Get:3 http://ftpmaster.internal jaunty/universe Packages [3311kB] Get:4 http://ftpmaster.internal jaunty/main Packages [1192kB] Fetched 4578kB in 11s (402kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: binutils cpp-4.3 debianutils g++-4.3 gcc-4.3 gcc-4.3-base libc6 libc6-dev libgcc1 libgomp1 libstdc++6 libstdc++6-4.3-dev linux-libc-dev procps 14 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/18.9MB of archives. After this operation, 270kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! debianutils linux-libc-dev libc6-dev libgomp1 gcc-4.3-base libstdc++6 cpp-4.3 binutils gcc-4.3 g++-4.3 libstdc++6-4.3-dev libgcc1 libc6 procps Preconfiguring packages ... Authentication warning overridden. (Reading database ... 9539 files and directories currently installed.) Preparing to replace debianutils 2.30ubuntu1 (using .../debianutils_2.30ubuntu2_armel.deb) ... Unpacking replacement debianutils ... Setting up debianutils (2.30ubuntu2) ... (Reading database ... 9539 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.27-9.18 (using .../linux-libc-dev_2.6.28-1.1_armel.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libc6-dev 2.8+20081027-0ubuntu10 (using .../libc6-dev_2.9-0ubuntu3_armel.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libgomp1 4.3.2-2ubuntu4 (using .../libgomp1_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.3-base 4.3.2-2ubuntu4 (using .../gcc-4.3-base_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement gcc-4.3-base ... Setting up gcc-4.3-base (4.3.2-2ubuntu6) ... (Reading database ... 9550 files and directories currently installed.) Preparing to replace libstdc++6 4.3.2-2ubuntu4 (using .../libstdc++6_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.3.2-2ubuntu6) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place (Reading database ... 9550 files and directories currently installed.) Preparing to replace cpp-4.3 4.3.2-2ubuntu4 (using .../cpp-4.3_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement cpp-4.3 ... Preparing to replace binutils 2.19-0ubuntu2 (using .../binutils_2.19-0ubuntu3_armel.deb) ... Unpacking replacement binutils ... Preparing to replace gcc-4.3 4.3.2-2ubuntu4 (using .../gcc-4.3_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement gcc-4.3 ... Preparing to replace g++-4.3 4.3.2-2ubuntu4 (using .../g++-4.3_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement g++-4.3 ... Preparing to replace libstdc++6-4.3-dev 4.3.2-2ubuntu4 (using .../libstdc++6-4.3-dev_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement libstdc++6-4.3-dev ... Preparing to replace libgcc1 1:4.3.2-2ubuntu4 (using .../libgcc1_1%3a4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.3.2-2ubuntu6) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place (Reading database ... 9550 files and directories currently installed.) Preparing to replace libc6 2.8+20081027-0ubuntu10 (using .../libc6_2.9-0ubuntu3_armel.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.9-0ubuntu3) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place (Reading database ... 9550 files and directories currently installed.) Preparing to replace procps 1:3.2.7-9ubuntu2 (using .../procps_1%3a3.2.7-9ubuntu3_armel.deb) ... Unpacking replacement procps ... Setting up linux-libc-dev (2.6.28-1.1) ... Setting up libc6-dev (2.9-0ubuntu3) ... Setting up libgomp1 (4.3.2-2ubuntu6) ... Setting up cpp-4.3 (4.3.2-2ubuntu6) ... Setting up binutils (2.19-0ubuntu3) ... Setting up gcc-4.3 (4.3.2-2ubuntu6) ... Setting up procps (1:3.2.7-9ubuntu3) ... Installing new version of config file /etc/sysctl.d/10-process-security.conf ... * Setting kernel variables (/etc/sysctl.conf)...  [ OK ] * Setting kernel variables (/etc/sysctl.d/10-console-messages.conf)...  [ OK ] * Setting kernel variables (/etc/sysctl.d/10-network-security.conf)...  [ OK ] * Setting kernel variables (/etc/sysctl.d/10-process-security.conf)...  error: "vm.mmap_min_addr" is an unknown key [fail] * Setting kernel variables (/etc/sysctl.d/10-tcp-timestamps-workaround.conf)...  [ OK ] Setting up libstdc++6-4.3-dev (4.3.2-2ubuntu6) ... Setting up g++-4.3 (4.3.2-2ubuntu6) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place removed: nologin@ modified: mtab RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '783074-1839887', '--nolog', '--batch', '--archive=ubuntu', '--purpose=PRIMARY', '--dist=jaunty', '--comp=universe', 'adjtimex_1.26-1.dsc'] Initiating build Automatic build of adjtimex_1.26-1 on kahikatea by sbuild/armel 1.170.5 Build started at 20081203-0846 ****************************************************************************** adjtimex_1.26-1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 5), po-debconf Checking for already installed source dependencies... debhelper: missing po-debconf: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper po-debconf Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils curl file gettext gettext-base groff-base html2text intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libcroco3 libcurl3 libglib2.0-0 libglib2.0-data libio-compress-base-perl libio-compress-zlib-perl libmagic1 libmail-sendmail-perl libsys-hostname-long-perl libxml2 man-db sgml-base xml-core Suggested packages: wamerican wordlist whois vacation dh-make cvs gettext-doc groff less www-browser libmail-box-perl sgml-base-doc The following NEW packages will be installed: bsdmainutils curl debhelper file gettext gettext-base groff-base html2text intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libcroco3 libcurl3 libglib2.0-0 libglib2.0-data libio-compress-base-perl libio-compress-zlib-perl libmagic1 libmail-sendmail-perl libsys-hostname-long-perl libxml2 man-db po-debconf sgml-base xml-core 0 upgraded, 25 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/7676kB of archives. After this operation, 29.2MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file bsdmainutils gettext-base groff-base libcompress-raw-zlib-perl libio-compress-base-perl libio-compress-zlib-perl libcompress-zlib-perl libxml2 man-db sgml-base xml-core libcurl3 curl html2text libglib2.0-0 libcroco3 gettext intltool-debian po-debconf debhelper libglib2.0-data libsys-hostname-long-perl libmail-sendmail-perl dpkg-preconfigure: unable to re-open stdin: Authentication warning overridden. Selecting previously deselected package libmagic1. (Reading database ... 9550 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_4.26-1_armel.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.26-1_armel.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_6.1.10ubuntu3_armel.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-6ubuntu1_armel.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.18.1.1-21_armel.deb) ... Selecting previously deselected package libcompress-raw-zlib-perl. Unpacking libcompress-raw-zlib-perl (from .../libcompress-raw-zlib-perl_2.015-1_armel.deb) ... Selecting previously deselected package libio-compress-base-perl. Unpacking libio-compress-base-perl (from .../libio-compress-base-perl_2.015-1_all.deb) ... Selecting previously deselected package libio-compress-zlib-perl. Unpacking libio-compress-zlib-perl (from .../libio-compress-zlib-perl_2.015-1_all.deb) ... Selecting previously deselected package libcompress-zlib-perl. Unpacking libcompress-zlib-perl (from .../libcompress-zlib-perl_2.015-1_all.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.6.32.dfsg-5ubuntu1_armel.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.3-1_armel.deb) ... Selecting previously deselected package sgml-base. Unpacking sgml-base (from .../sgml-base_1.26_all.deb) ... Selecting previously deselected package xml-core. Unpacking xml-core (from .../archives/xml-core_0.12_all.deb) ... Selecting previously deselected package libcurl3. Unpacking libcurl3 (from .../libcurl3_7.18.2-7ubuntu2_armel.deb) ... Selecting previously deselected package curl. Unpacking curl (from .../curl_7.18.2-7ubuntu2_armel.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-5_armel.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.19.2-0ubuntu1_armel.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.1-2_armel.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-6ubuntu1_armel.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.15ubuntu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.0.17ubuntu1_all.deb) ... Selecting previously deselected package libglib2.0-data. Unpacking libglib2.0-data (from .../libglib2.0-data_2.19.2-0ubuntu1_all.deb) ... Selecting previously deselected package libsys-hostname-long-perl. Unpacking libsys-hostname-long-perl (from .../libsys-hostname-long-perl_1.4-2_all.deb) ... Selecting previously deselected package libmail-sendmail-perl. Unpacking libmail-sendmail-perl (from .../libmail-sendmail-perl_0.79.16-1_all.deb) ... Setting up libmagic1 (4.26-1) ... Setting up file (4.26-1) ... Setting up bsdmainutils (6.1.10ubuntu3) ... Setting up gettext-base (0.17-6ubuntu1) ... Setting up groff-base (1.18.1.1-21) ... Setting up libcompress-raw-zlib-perl (2.015-1) ... Setting up libio-compress-base-perl (2.015-1) ... Setting up libio-compress-zlib-perl (2.015-1) ... Setting up libcompress-zlib-perl (2.015-1) ... Setting up libxml2 (2.6.32.dfsg-5ubuntu1) ... Setting up man-db (2.5.3-1) ... Building database of manual pages ... ... skipping, since this is a buildd Setting up sgml-base (1.26) ... Setting up xml-core (0.12) ... Setting up libcurl3 (7.18.2-7ubuntu2) ... Setting up curl (7.18.2-7ubuntu2) ... Setting up html2text (1.3.2a-5) ... Setting up libglib2.0-0 (2.19.2-0ubuntu1) ... Setting up libcroco3 (0.6.1-2) ... Setting up gettext (0.17-6ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.15ubuntu1) ... Setting up debhelper (7.0.17ubuntu1) ... Setting up libglib2.0-data (2.19.2-0ubuntu1) ... Setting up libsys-hostname-long-perl (1.4-2) ... Setting up libmail-sendmail-perl (0.79.16-1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place removed: nologin@ modified: mtab Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.9-0ubuntu3 make_3.81-5 dpkg-dev_1.14.22ubuntu1 g++-4.3_4.3.2-2ubuntu6 gcc-4.3_4.3.2-2ubuntu6 binutils_2.19-0ubuntu3 libstdc++6_4.3.2-2ubuntu6 libstdc++6-4.3-dev_4.3.2-2ubuntu6 ------------------------------------------------------------------------------ sh: gcc: command not found dpkg-source: warning: Couldn't determine gcc system type, falling back to default (native compilation) gpg: Signature made Sun Aug 17 22:59:14 2008 BST using RSA key ID E298966D gpg: Can't check signature: public key not found dpkg-source: extracting adjtimex in adjtimex-1.26 dpkg-source: info: unpacking adjtimex_1.26.orig.tar.gz dpkg-source: info: applying adjtimex_1.26-1.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package adjtimex dpkg-buildpackage: source version 1.26-1 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp # clean up after the build process. debconf-updatepo [ ! -f Makefile ] || /usr/bin/make veryclean make[1]: Entering directory `/build/buildd/adjtimex-1.26' rm -f core *.o rm -f adjtimex make[1]: Leaving directory `/build/buildd/adjtimex-1.26' rm -rf adjtimex *.o config.* test -r /usr/share/misc/config.sub && \ cp -f /usr/share/misc/config.sub config.sub make: [clean] Error 1 (ignored) test -r /usr/share/misc/config.guess && \ cp -f /usr/share/misc/config.guess config.guess make: [clean] Error 1 (ignored) dh_clean debian/rules build dh_testdir # configure the package. ./configure --host=arm-linux-gnueabi --build=arm-linux-gnueabi --prefix=/usr --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info creating cache ./config.cache checking for gcc... gcc checking whether the C compiler (gcc -Wall -g -O2 -Wl,-Bsymbolic-functions) works... yes checking whether the C compiler (gcc -Wall -g -O2 -Wl,-Bsymbolic-functions) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking for a BSD compatible install... /usr/bin/install -c checking whether ln -s works... yes checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for limits.h... yes checking for sys/time.h... yes checking for unistd.h... yes checking for working const... yes checking for inline... inline checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for gettimeofday... yes checking for mktime... yes checking for putenv... yes checking for select... yes updating cache ./config.cache creating ./config.status creating Makefile dh_testdir # compile the package. /usr/bin/make CFLAGS="-Wall -g -O2" make[1]: Entering directory `/build/buildd/adjtimex-1.26' cc -Wall -g -O2 -c mat.c cc -Wall -g -O2 -I. -DVERSION=\"1.26\" -o adjtimex adjtimex.c \ mat.o -lm adjtimex.c: In function 'outb': adjtimex.c:519: warning: ignoring return value of 'write', declared with attribute warn_unused_result adjtimex.c: In function 'inb': adjtimex.c:533: warning: ignoring return value of 'read', declared with attribute warn_unused_result adjtimex.c: In function 'valid_system_rate': adjtimex.c:1557: warning: ignoring return value of 'fgets', declared with attribute warn_unused_result adjtimex.c: In function 'valid_cmos_rate': adjtimex.c:1595: warning: ignoring return value of 'fgets', declared with attribute warn_unused_result sed -e 's/@VERSION@/1.26/' \ -e "s/@DATE@/`date +%Y-%m-%d`/" \ adjtimex.lsm.in >adjtimex.lsm make[1]: Leaving directory `/build/buildd/adjtimex-1.26' #/usr/bin/docbook-to-man debian/adjtimex.sgml > adjtimex.1 touch build-stamp /usr/bin/fakeroot debian/rules binary-arch dh_testdir dh_testroot dh_clean -k dh_installdirs # install the package into debian/adjtimex. install -p -o root -g root -m 755 -s adjtimex /build/buildd/adjtimex-1.26/debian/adjtimex/sbin install -p -o root -g root -m 755 debian/adjtimexconfig \ /build/buildd/adjtimex-1.26/debian/adjtimex/usr/sbin/adjtimexconfig dh_testdir dh_testroot dh_installdebconf dh_installdocs dh_installexamples dh_installmenu dh_installinit -n dh_installcron dh_installman adjtimex.8 debian/adjtimexconfig.8 dh_installinfo dh_installchangelogs ChangeLog dh_link dh_strip dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: adjtimex dh_strip debug symbol extraction: packages to act on: adjtimex dh_strip debug symbol extraction: ignored packages: pkgstriptranslations: processing control file: ./debian/adjtimex-dbgsym/DEBIAN/control, package adjtimex-dbgsym, directory ./debian/adjtimex-dbgsym pkgstriptranslations: adjtimex-dbgsym does not contain translations, skipping pkgstriptranslations: preparing translation tarball adjtimex_1.26-1_armel_translations.tar.gz...done (14 files) pkgmaintainermangler: Maintainer field overridden to "Ubuntu MOTU Developers " warning, `/build/buildd/adjtimex-1.26/debian/adjtimex-dbgsym/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `adjtimex-dbgsym' in `../adjtimex-dbgsym_1.26-1_armel.ddeb'. dh_compress dh_fixperms dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb pkgstriptranslations: processing control file: ./debian/adjtimex/DEBIAN/control, package adjtimex, directory ./debian/adjtimex pkgstriptranslations: adjtimex does not contain translations, skipping pkgstriptranslations: tarball already exists pkgmaintainermangler: Maintainer field overridden to "Ubuntu MOTU Developers " warning, `debian/adjtimex/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `adjtimex' in `../adjtimex_1.26-1_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../adjtimex_1.26-1_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code Use of uninitialized value within %f2p in hash element at /usr/bin/dpkg-genchanges line 496. Use of uninitialized value within @_ in list assignment at /usr/share/perl5/Dpkg/Arch.pm line 300. Use of uninitialized value $b in string eq at /usr/share/perl5/Dpkg/Arch.pm line 302. Use of uninitialized value $_ in pattern match (m//) at /usr/share/perl5/Dpkg/Arch.pm line 251. Use of uninitialized value $arch in hash element at /usr/share/perl5/Dpkg/Arch.pm line 258. dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20081203-0847 Publishing chroot-autobuild/build/buildd/adjtimex_1.26-1_armel_translations.tar.gz for rosetta. Publishing debug debs. chroot-autobuild/build/buildd/adjtimex_1.26-1_armel.deb: new debian package, version 2.0. size 58610 bytes: control archive= 8826 bytes. 21 bytes, 1 lines conffiles 169 bytes, 8 lines * config #!/bin/sh 871 bytes, 19 lines control 668 bytes, 10 lines md5sums 2174 bytes, 119 lines * postinst #!/bin/sh 733 bytes, 31 lines * postrm #!/bin/sh 16026 bytes, 100 lines templates Package: adjtimex Version: 1.26-1 Architecture: armel Maintainer: Ubuntu MOTU Developers Original-Maintainer: James R. Van Zandt Installed-Size: 176 Depends: libc6 (>= 2.4), debconf | debconf-2.0 Suggests: ntpdate Section: admin Priority: optional Description: Utility to display or set the kernel time variables This program gives you raw access to the kernel time variables. For a machine connected to the Internet, or equipped with a precision oscillator or radio clock, the best way to keep the system clock correct is with ntpd. However, for a standalone or intermittently connected machine, you may use adjtimex instead to at least correct for systematic drift. adjtimex can optionally adjust the system clock using the CMOS clock as a reference, and can log times for long-term estimation of drift rates. chroot-autobuild/build/buildd/adjtimex_1.26-1_armel.deb: drwxr-xr-x root/root 0 2008-12-03 08:47 ./ drwxr-xr-x root/root 0 2008-12-03 08:47 ./sbin/ -rwxr-xr-x root/root 43040 2008-12-03 08:47 ./sbin/adjtimex drwxr-xr-x root/root 0 2008-12-03 08:47 ./usr/ drwxr-xr-x root/root 0 2008-12-03 08:47 ./usr/sbin/ -rwxr-xr-x root/root 1906 2008-12-03 08:47 ./usr/sbin/adjtimexconfig drwxr-xr-x root/root 0 2008-12-03 08:47 ./usr/share/ drwxr-xr-x root/root 0 2008-12-03 08:47 ./usr/share/man/ drwxr-xr-x root/root 0 2008-12-03 08:47 ./usr/share/man/man8/ -rw-r--r-- root/root 658 2008-12-03 08:47 ./usr/share/man/man8/adjtimexconfig.8.gz -rw-r--r-- root/root 5685 2008-12-03 08:47 ./usr/share/man/man8/adjtimex.8.gz drwxr-xr-x root/root 0 2008-12-03 08:47 ./usr/share/doc/ drwxr-xr-x root/root 0 2008-12-03 08:47 ./usr/share/doc/adjtimex/ -rw-r--r-- root/root 577 2008-12-03 08:47 ./usr/share/doc/adjtimex/README.Debian -rw-r--r-- root/root 6694 2008-12-03 08:47 ./usr/share/doc/adjtimex/changelog.Debian.gz -rw-r--r-- root/root 3069 2007-10-06 18:36 ./usr/share/doc/adjtimex/README.gz -rw-r--r-- root/root 6233 2008-08-17 19:13 ./usr/share/doc/adjtimex/changelog.gz -rw-r--r-- root/root 3740 2004-04-03 20:51 ./usr/share/doc/adjtimex/README.ru.gz -rw-r--r-- root/root 1132 2008-12-03 08:47 ./usr/share/doc/adjtimex/copyright drwxr-xr-x root/root 0 2008-12-03 08:47 ./etc/ drwxr-xr-x root/root 0 2008-12-03 08:47 ./etc/init.d/ -rwxr-xr-x root/root 893 2008-12-03 08:47 ./etc/init.d/adjtimex adjtimex_1.26-1_armel.changes: Format: 1.8 Date: Sun, 17 Aug 2008 17:52:14 -0400 Source: adjtimex Binary: adjtimex Architecture: armel_translations armel Version: 1.26-1 Distribution: jaunty Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: James R. Van Zandt Description: adjtimex - Utility to display or set the kernel time variables Changes: adjtimex (1.26-1) unstable; urgency=low . * New upstream release. Fix a possible hang with the Intersil ISL1208, one of those new non-PC-compatible RTCs. Cleanly exits with an error message, instead of either hang or returning garbage. (Thanks to Alain Guibert). . * debian/control: bump Debian policy version to 3.8.0 (no changes needed) . * debian/rules: use "filter" instead of "findstring" to parse DEB_BUILD_OPTIONS. Checksums-Sha1: 8943234592455f5aa43653b07ccde443fa401a3f 9575 adjtimex_1.26-1_armel_translations.tar.gz d921a234248d3ed370bed202155bc75a09d3e1a6 58610 adjtimex_1.26-1_armel.deb Checksums-Sha256: 4995cb1a9757e833023ef1ca6b0c788baf1ac16f0338497781dbc1ae6e0a4d59 9575 adjtimex_1.26-1_armel_translations.tar.gz 8555d635d8ab26cf5411fbc026afe783f48750e205933cf175ac6b916a9e5783 58610 adjtimex_1.26-1_armel.deb Files: f4a7be5f1299539eee7eef392f618a25 9575 raw-translations - adjtimex_1.26-1_armel_translations.tar.gz 52a8e82e7f98b847293aa8c0610a7c51 58610 admin optional adjtimex_1.26-1_armel.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/adjtimex-1.26 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --root=/home/buildd/build-783074-1839887/chroot-autobuild --purge intltool-debian groff-base libglib2.0-0 libio-compress-base-perl libcurl3 libcompress-zlib-perl gettext file libglib2.0-data xml-core html2text curl gettext-base debhelper sgml-base po-debconf libcroco3 libmagic1 libcompress-raw-zlib-perl libxml2 libio-compress-zlib-perl libsys-hostname-long-perl libmail-sendmail-perl bsdmainutils man-db (Reading database ... 10797 files and directories currently installed.) Removing libcompress-zlib-perl ... Removing libglib2.0-data ... Removing xml-core ... Purging configuration files for xml-core ... dpkg - warning: while removing xml-core, directory `/etc/sgml' not empty so not removed. Removing curl ... Removing debhelper ... Removing sgml-base ... Purging configuration files for sgml-base ... Removing po-debconf ... Removing libio-compress-zlib-perl ... Removing libmail-sendmail-perl ... Removing man-db ... Purging configuration files for man-db ... Removing intltool-debian ... Removing groff-base ... Purging configuration files for groff-base ... Removing libio-compress-base-perl ... Removing libcurl3 ... Purging configuration files for libcurl3 ... Removing gettext ... Removing file ... Purging configuration files for file ... Removing html2text ... Purging configuration files for html2text ... Removing gettext-base ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libcompress-raw-zlib-perl ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libsys-hostname-long-perl ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Processing triggers for libc6 ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20081203-0848 Build needed 00:00:43, 788k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '783074-1839887'] Scanning for processes to kill in build 783074-1839887... Scanning for processes to kill in build /home/buildd/build-783074-1839887/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '783074-1839887'] Unmounting chroot for build 783074-1839887... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '783074-1839887'] Removing build 783074-1839887