Format: 1.8 Date: Tue, 25 Feb 2020 23:58:43 -0700 Source: altos Binary: altos Architecture: arm64 Version: 1.9.2-1 Distribution: focal-proposed Urgency: medium Maintainer: Launchpad Build Daemon Changed-By: Bdale Garbee Description: altos - Altus Metrum firmware and utilities Changes: altos (1.9.2-1) unstable; urgency=medium . [ Bdale Garbee ] * Releasing: capture notes from 1.9.1 release * Releasing: add TeleMetrum v3.0 firmware to production list * doc: update copyright year in footers, note need to check this doc/RELNOTEs * update info on using separate pyro batteries to encourage including a switch * update TeleMega production scripts for v4.0 * include TeleMega v4 in list of firmware included in fat build and LLC repo * update copyright assertion in TeleLaunch manual * update ChangeLog for release 1.9.2 . [ Keith Packard ] * altos: Initial bits for TeleMega v4.0 * altos: Build TeleMega v4.0 bits * altos: Use AO_TICK_TYPE/AO_TICK_SIGNED for lco/pad code * altos: Make debug telemini firmware a bit easier to build * altos: TeleMini beeper is on Tim2 CH4, not Tim3 CH4 * altos: Disable ao_btm debug. Avoids breaking 's' command * altos: Always start application if boot pin isn't in use * Generate altosdroid/app/build.gradle at configure time * Force using opensdk-8 to build altosdroid * Bump altosdroid version to 20, always build release apk * Use 'must' instead of 'should' in reference to switch for pyro battery * altosdroid: Switch to NotificationCompat * altosdroid: Request fine location permission if not already granted * altosdroid: Check if the telem service is running when bluetooth gets enabled * Bump version to build a new android app -- 1.9.1c * altosdroid: Add text size selection * Bump version to build a new android app (23) * altosdroid: Use custom dialog themes for all dialogs * altosdroid: Fix a pile of compile warnings * altosdroid: Change tracker selection dialog * altosdroid: Ignore 'build.gradle', which is built from a .in file * altosdroid: Add helper 'makefile' * altosui: Set idle mode frequency before starting link * altosdroid: When the user switches frequency, look for something there * Bump version to build a new android app (25) * altosdroid: Use select tracker dialog when deleting a tracker * altosdroid: Make frequency changes during idle mode work * altosdroid: Change layout of idle mode dialog a bit * altoslib: Reset consecutive GPS count when GPS bad * altos: Fix wiring mistakes for TeleMega v4.0 * altos: Add new telemetry packet format for TeleMega v4 * altos: Create new log format for TeleMega v4 * altoslib: Add 'gauss' units for magnetic field strength * altosuilib: Add fourth column to info table * altoslib: Store IMU accel ground data in converted values * altoslib: Add support for TeleMega v4 * altoslib: Move 'state_name' API to AltosCalData * altoslib: Report whether GPS data contains new location/sat info * altoslib: Re-initialize cal data for eeprom record set * altoslib: Report raw baro height instead of kalman filtered value * altosuilib: Put units on GPS altitude and height in info table * altoslib: Pass all flight records while reading telem file * doc: updates for 1.9.2 * altosui: Add TeleMega v4.0 firmware to altosui packaged bits * altosuilib: Eliminate a couple java compiler warnings * Bump version for new android upload * altos: Log BMX160 data when present * altos: Copy BMX160 data to data ring * altos: Get BMX160 initialized correctly * altoslib: Remove ADXL375 debug noise * ao-tools: Add TeleMega v4.0 to ao-eeprom * altos: Init BMX160 more carefully * altoslib: Correct IMU axes for telemetry data * ao-tools: Handle TeleMega v4.0 telemetry in ao-telem * altos: Adjust comment about how the BMX160 is oriented * altos/altoslib: BMX160 Y axis gyro direction is opposite from MPU * altoslib: Fix Tmega v4 eeprom parsing * libaltos: Delay freeing serial device until not busy * altoslib: Correct sign of telemega v4 pitch * altoslib: Remove hard-coded accel scale for mega eeprom * altosuilib, altoslib: Add azimuth and compass to reports * altos/telemega-4.0: Fix signs of IMU pitch and mag across * altos/bmx160: Compute µT in bmx160 driver using trim data * altoslib: BMX160 driver now returns µT values for mag sensor * Bump java lib versions in preparation for 1.9.2 * Set doc version and date from package version and release date * Bump version to 1.9.2, android 27 * Bump java lib versions in preparation for 1.9.2 * altoslib: Add TeleMega-v4 adxl375 config to AltosConfigData * Bump version to 1.9.2, android 27 * Set doc version and date from package version and release date * Bump java lib versions in preparation for 1.9.2 * Bump version to 1.9.2, android 27 * altoslib: Remove debug printf from AltosIMU.java * libaltos: Create altos_pause_one_second API * Bump java lib versions in preparation for 1.9.2 * Bump version to 1.9.2, android 27 Checksums-Sha1: 90d2d0d21f323228e23cc3c546bbf0a4c2d029a3 670256 altos-dbgsym_1.9.2-1_arm64.ddeb c9300aef42756c14c2bacc7b8fa20e09764b448f 12057 altos_1.9.2-1_arm64.buildinfo 61f88aa94b37930f6a218a7c1a3597606bf0a0f3 23757520 altos_1.9.2-1_arm64.deb Checksums-Sha256: 6858b938e0d86f2ecc1cdd30a9cd108b82c19b34a1bfe890e435ecd7b7d66f81 670256 altos-dbgsym_1.9.2-1_arm64.ddeb 350695886dce03583e3d6ce5bb7c535d41f610de4c6bb3b1deb9c88da2d049dd 12057 altos_1.9.2-1_arm64.buildinfo 44ccfe6e6b2dd03837accb3a95ac79f13c0666c68aebaddff9f409cf31bbc1f0 23757520 altos_1.9.2-1_arm64.deb Files: 35c72984dbb3e9591b12b9bd67afda53 670256 debug optional altos-dbgsym_1.9.2-1_arm64.ddeb 04d0ed0a2f60289bb84d13c06447e116 12057 electronics optional altos_1.9.2-1_arm64.buildinfo ff896ca6dd0d9da63c46eb2d9442eea4 23757520 electronics optional altos_1.9.2-1_arm64.deb