Format: 1.8 Date: Tue, 25 Feb 2020 23:58:43 -0700 Source: altos Binary: altos Architecture: armhf Version: 1.9.2-1 Distribution: focal-proposed Urgency: medium Maintainer: Launchpad Build Daemon Changed-By: Bdale Garbee Description: altos - Altus Metrum firmware and utilities Changes: altos (1.9.2-1) unstable; urgency=medium . [ Bdale Garbee ] * Releasing: capture notes from 1.9.1 release * Releasing: add TeleMetrum v3.0 firmware to production list * doc: update copyright year in footers, note need to check this doc/RELNOTEs * update info on using separate pyro batteries to encourage including a switch * update TeleMega production scripts for v4.0 * include TeleMega v4 in list of firmware included in fat build and LLC repo * update copyright assertion in TeleLaunch manual * update ChangeLog for release 1.9.2 . [ Keith Packard ] * altos: Initial bits for TeleMega v4.0 * altos: Build TeleMega v4.0 bits * altos: Use AO_TICK_TYPE/AO_TICK_SIGNED for lco/pad code * altos: Make debug telemini firmware a bit easier to build * altos: TeleMini beeper is on Tim2 CH4, not Tim3 CH4 * altos: Disable ao_btm debug. Avoids breaking 's' command * altos: Always start application if boot pin isn't in use * Generate altosdroid/app/build.gradle at configure time * Force using opensdk-8 to build altosdroid * Bump altosdroid version to 20, always build release apk * Use 'must' instead of 'should' in reference to switch for pyro battery * altosdroid: Switch to NotificationCompat * altosdroid: Request fine location permission if not already granted * altosdroid: Check if the telem service is running when bluetooth gets enabled * Bump version to build a new android app -- 1.9.1c * altosdroid: Add text size selection * Bump version to build a new android app (23) * altosdroid: Use custom dialog themes for all dialogs * altosdroid: Fix a pile of compile warnings * altosdroid: Change tracker selection dialog * altosdroid: Ignore 'build.gradle', which is built from a .in file * altosdroid: Add helper 'makefile' * altosui: Set idle mode frequency before starting link * altosdroid: When the user switches frequency, look for something there * Bump version to build a new android app (25) * altosdroid: Use select tracker dialog when deleting a tracker * altosdroid: Make frequency changes during idle mode work * altosdroid: Change layout of idle mode dialog a bit * altoslib: Reset consecutive GPS count when GPS bad * altos: Fix wiring mistakes for TeleMega v4.0 * altos: Add new telemetry packet format for TeleMega v4 * altos: Create new log format for TeleMega v4 * altoslib: Add 'gauss' units for magnetic field strength * altosuilib: Add fourth column to info table * altoslib: Store IMU accel ground data in converted values * altoslib: Add support for TeleMega v4 * altoslib: Move 'state_name' API to AltosCalData * altoslib: Report whether GPS data contains new location/sat info * altoslib: Re-initialize cal data for eeprom record set * altoslib: Report raw baro height instead of kalman filtered value * altosuilib: Put units on GPS altitude and height in info table * altoslib: Pass all flight records while reading telem file * doc: updates for 1.9.2 * altosui: Add TeleMega v4.0 firmware to altosui packaged bits * altosuilib: Eliminate a couple java compiler warnings * Bump version for new android upload * altos: Log BMX160 data when present * altos: Copy BMX160 data to data ring * altos: Get BMX160 initialized correctly * altoslib: Remove ADXL375 debug noise * ao-tools: Add TeleMega v4.0 to ao-eeprom * altos: Init BMX160 more carefully * altoslib: Correct IMU axes for telemetry data * ao-tools: Handle TeleMega v4.0 telemetry in ao-telem * altos: Adjust comment about how the BMX160 is oriented * altos/altoslib: BMX160 Y axis gyro direction is opposite from MPU * altoslib: Fix Tmega v4 eeprom parsing * libaltos: Delay freeing serial device until not busy * altoslib: Correct sign of telemega v4 pitch * altoslib: Remove hard-coded accel scale for mega eeprom * altosuilib, altoslib: Add azimuth and compass to reports * altos/telemega-4.0: Fix signs of IMU pitch and mag across * altos/bmx160: Compute µT in bmx160 driver using trim data * altoslib: BMX160 driver now returns µT values for mag sensor * Bump java lib versions in preparation for 1.9.2 * Set doc version and date from package version and release date * Bump version to 1.9.2, android 27 * Bump java lib versions in preparation for 1.9.2 * altoslib: Add TeleMega-v4 adxl375 config to AltosConfigData * Bump version to 1.9.2, android 27 * Set doc version and date from package version and release date * Bump java lib versions in preparation for 1.9.2 * Bump version to 1.9.2, android 27 * altoslib: Remove debug printf from AltosIMU.java * libaltos: Create altos_pause_one_second API * Bump java lib versions in preparation for 1.9.2 * Bump version to 1.9.2, android 27 Checksums-Sha1: 61cc2a5d27ea250013aeec370ac37abefbf9b1df 661448 altos-dbgsym_1.9.2-1_armhf.ddeb f39e7a4a9b6e4bdb16ce786f63e21899d9126332 11926 altos_1.9.2-1_armhf.buildinfo cf51f321886f7a4b61677ac49af740183916e941 23744368 altos_1.9.2-1_armhf.deb Checksums-Sha256: ad0c76cd63e203f456ed6957c94cf5e2a09cd3d2783afc9ceb6a8812f3bb6117 661448 altos-dbgsym_1.9.2-1_armhf.ddeb eb9b35b0a30413266f028cd864d3560f8439fa5e176aecfa4a07444351f38160 11926 altos_1.9.2-1_armhf.buildinfo 6f14da1d3979996f8e857783375b6dbfe612b7628677536ba1f888b4a6b1326b 23744368 altos_1.9.2-1_armhf.deb Files: 80b4c013951d8f06b472a8943136387a 661448 debug optional altos-dbgsym_1.9.2-1_armhf.ddeb f88d9b5ed7edd249dc09ee695a0b6c7b 11926 electronics optional altos_1.9.2-1_armhf.buildinfo 6d60db8a90ae0b7df564b727cdb9dfd5 23744368 electronics optional altos_1.9.2-1_armhf.deb