RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '1463539-3007936', '/home/buildd/filecache-default/f3db41637b042a98b679976c67b0e58d25a91885'] Synching the system clock with the buildd NTP service... 23 Jan 10:20:27 ntpdate[18856]: adjust time server 10.211.37.1 offset -0.041128 sec Unpacking chroot for build 1463539-3007936 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '1463539-3007936'] Mounting chroot for build 1463539-3007936 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '1463539-3007936', 'universe'] Attempting OGRE for universe in build-1463539-3007936 No OGRE sources.list found. RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '1463539-3007936', 'deb http://ftpmaster.internal/ubuntu lucid main universe'] Overriding sources.list in build-1463539-3007936 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '1463539-3007936'] Updating debian chroot for build 1463539-3007936 Get:1 http://ftpmaster.internal lucid Release.gpg [189B] Get:2 http://ftpmaster.internal lucid Release [57.2kB] Get:3 http://ftpmaster.internal lucid/main Packages [1392kB] Get:4 http://ftpmaster.internal lucid/universe Packages [5386kB] Fetched 6836kB in 7s (884kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: cpp-4.4 g++-4.4 gcc-4.4 gcc-4.4-base libgcc1 libgmp3c2 libgomp1 libgssapi-krb5-2 libk5crypto3 libkrb5-3 libkrb5support0 libplymouth2 libssl0.9.8 libstdc++6 libstdc++6-4.4-dev linux-libc-dev openssl python2.6-minimal 18 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 16.3MB of archives. After this operation, 53.2kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libgomp1 gcc-4.4-base libstdc++6 cpp-4.4 gcc-4.4 g++-4.4 libstdc++6-4.4-dev libgcc1 libgmp3c2 libssl0.9.8 python2.6-minimal libgssapi-krb5-2 libkrb5-3 libkrb5support0 libk5crypto3 openssl libplymouth2 linux-libc-dev Authentication warning overridden. Get:1 http://ftpmaster.internal lucid/main libgomp1 4.4.3-1ubuntu1 [26.8kB] Get:2 http://ftpmaster.internal lucid/main gcc-4.4-base 4.4.3-1ubuntu1 [117kB] Get:3 http://ftpmaster.internal lucid/main libstdc++6 4.4.3-1ubuntu1 [384kB] Get:4 http://ftpmaster.internal lucid/main cpp-4.4 4.4.3-1ubuntu1 [3740kB] Get:5 http://ftpmaster.internal lucid/main gcc-4.4 4.4.3-1ubuntu1 [884kB] Get:6 http://ftpmaster.internal lucid/main g++-4.4 4.4.3-1ubuntu1 [4902kB] Get:7 http://ftpmaster.internal lucid/main libstdc++6-4.4-dev 4.4.3-1ubuntu1 [1567kB] Get:8 http://ftpmaster.internal lucid/main libgcc1 1:4.4.3-1ubuntu1 [44.7kB] Get:9 http://ftpmaster.internal lucid/main libgmp3c2 2:4.3.2+dfsg-1 [290kB] Get:10 http://ftpmaster.internal lucid/main libssl0.9.8 0.9.8k-7ubuntu5 [959kB] Get:11 http://ftpmaster.internal lucid/main python2.6-minimal 2.6.4-4ubuntu1 [1521kB] Get:12 http://ftpmaster.internal lucid/main libgssapi-krb5-2 1.8+dfsg~alpha1-4 [124kB] Get:13 http://ftpmaster.internal lucid/main libkrb5-3 1.8+dfsg~alpha1-4 [374kB] Get:14 http://ftpmaster.internal lucid/main libkrb5support0 1.8+dfsg~alpha1-4 [42.0kB] Get:15 http://ftpmaster.internal lucid/main libk5crypto3 1.8+dfsg~alpha1-4 [109kB] Get:16 http://ftpmaster.internal lucid/main openssl 0.9.8k-7ubuntu5 [402kB] Get:17 http://ftpmaster.internal lucid/main libplymouth2 0.8.0~-7 [79.0kB] Get:18 http://ftpmaster.internal lucid/main linux-libc-dev 2.6.32-11.15 [730kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 16.3MB in 0s (19.1MB/s) (Reading database ... 12784 files and directories currently installed.) Preparing to replace libgomp1 4.4.2-9ubuntu4 (using .../libgomp1_4.4.3-1ubuntu1_powerpc.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.4-base 4.4.2-9ubuntu4 (using .../gcc-4.4-base_4.4.3-1ubuntu1_powerpc.deb) ... Unpacking replacement gcc-4.4-base ... Setting up gcc-4.4-base (4.4.3-1ubuntu1) ... (Reading database ... 12784 files and directories currently installed.) Preparing to replace libstdc++6 4.4.2-9ubuntu4 (using .../libstdc++6_4.4.3-1ubuntu1_powerpc.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.3-1ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12784 files and directories currently installed.) Preparing to replace cpp-4.4 4.4.2-9ubuntu4 (using .../cpp-4.4_4.4.3-1ubuntu1_powerpc.deb) ... Unpacking replacement cpp-4.4 ... Preparing to replace gcc-4.4 4.4.2-9ubuntu4 (using .../gcc-4.4_4.4.3-1ubuntu1_powerpc.deb) ... Unpacking replacement gcc-4.4 ... Preparing to replace g++-4.4 4.4.2-9ubuntu4 (using .../g++-4.4_4.4.3-1ubuntu1_powerpc.deb) ... Unpacking replacement g++-4.4 ... Preparing to replace libstdc++6-4.4-dev 4.4.2-9ubuntu4 (using .../libstdc++6-4.4-dev_4.4.3-1ubuntu1_powerpc.deb) ... Unpacking replacement libstdc++6-4.4-dev ... Preparing to replace libgcc1 1:4.4.2-9ubuntu4 (using .../libgcc1_1%3a4.4.3-1ubuntu1_powerpc.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.3-1ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12784 files and directories currently installed.) Preparing to replace libgmp3c2 2:4.3.1+dfsg-3 (using .../libgmp3c2_2%3a4.3.2+dfsg-1_powerpc.deb) ... Unpacking replacement libgmp3c2 ... Preparing to replace libssl0.9.8 0.9.8k-7ubuntu4 (using .../libssl0.9.8_0.9.8k-7ubuntu5_powerpc.deb) ... Unpacking replacement libssl0.9.8 ... Setting up libssl0.9.8 (0.9.8k-7ubuntu5) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12784 files and directories currently installed.) Preparing to replace python2.6-minimal 2.6.4-1ubuntu2 (using .../python2.6-minimal_2.6.4-4ubuntu1_powerpc.deb) ... Unpacking replacement python2.6-minimal ... Setting up python2.6-minimal (2.6.4-4ubuntu1) ... (Reading database ... 12784 files and directories currently installed.) Preparing to replace libgssapi-krb5-2 1.7+dfsg-4 (using .../libgssapi-krb5-2_1.8+dfsg~alpha1-4_powerpc.deb) ... Unpacking replacement libgssapi-krb5-2 ... Preparing to replace libkrb5-3 1.7+dfsg-4 (using .../libkrb5-3_1.8+dfsg~alpha1-4_powerpc.deb) ... Unpacking replacement libkrb5-3 ... Preparing to replace libkrb5support0 1.7+dfsg-4 (using .../libkrb5support0_1.8+dfsg~alpha1-4_powerpc.deb) ... Unpacking replacement libkrb5support0 ... Preparing to replace libk5crypto3 1.7+dfsg-4 (using .../libk5crypto3_1.8+dfsg~alpha1-4_powerpc.deb) ... Unpacking replacement libk5crypto3 ... Preparing to replace openssl 0.9.8k-7ubuntu4 (using .../openssl_0.9.8k-7ubuntu5_powerpc.deb) ... Unpacking replacement openssl ... Preparing to replace libplymouth2 0.8.0~-6 (using .../libplymouth2_0.8.0~-7_powerpc.deb) ... Unpacking replacement libplymouth2 ... Preparing to replace linux-libc-dev 2.6.32-10.14 (using .../linux-libc-dev_2.6.32-11.15_powerpc.deb) ... Unpacking replacement linux-libc-dev ... Setting up libgomp1 (4.4.3-1ubuntu1) ... Setting up libgmp3c2 (2:4.3.2+dfsg-1) ... Setting up cpp-4.4 (4.4.3-1ubuntu1) ... Setting up gcc-4.4 (4.4.3-1ubuntu1) ... Setting up libkrb5support0 (1.8+dfsg~alpha1-4) ... Setting up libk5crypto3 (1.8+dfsg~alpha1-4) ... Setting up libkrb5-3 (1.8+dfsg~alpha1-4) ... Setting up libgssapi-krb5-2 (1.8+dfsg~alpha1-4) ... Setting up openssl (0.9.8k-7ubuntu5) ... Setting up libplymouth2 (0.8.0~-7) ... Setting up linux-libc-dev (2.6.32-11.15) ... Setting up libstdc++6-4.4-dev (4.4.3-1ubuntu1) ... Setting up g++-4.4 (4.4.3-1ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '1463539-3007936', 'lucid', '--nolog', '--batch', '--archive=ubuntu', '--dist=lucid', '--purpose=PRIMARY', '--comp=universe', 'catdvi_0.14-11build1.dsc'] Initiating build 1463539-3007936 with 2 processor cores. Automatic build of catdvi_0.14-11build1 on adare by sbuild/powerpc 1.170.5 Build started at 20100123-1021 ****************************************************************************** catdvi_0.14-11build1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 5), libkpathsea-dev, autotools-dev, cdbs Checking for already installed source dependencies... debhelper: missing libkpathsea-dev: missing autotools-dev: missing cdbs: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper libkpathsea-dev autotools-dev cdbs Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf automake bsdmainutils fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libexpat1 libglib2.0-0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libkpathsea5 libmagic1 libpcre3 liburi-perl libwww-perl libxml-parser-perl libxml2 m4 man-db po-debconf Suggested packages: autoconf2.13 autoconf-archive gnu-standards autoconf-doc libtool wamerican wordlist whois vacation devscripts doc-base dh-make gettext-doc groff libdata-dump-perl libcrypt-ssleay-perl libio-socket-ssl-perl less www-browser libmail-box-perl Recommended packages: curl wget lynx cvs libglib2.0-data shared-mime-info libmailtools-perl libhtml-format-perl xml-core libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils cdbs debhelper fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libexpat1 libglib2.0-0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libkpathsea-dev libkpathsea5 libmagic1 libpcre3 liburi-perl libwww-perl libxml-parser-perl libxml2 m4 man-db po-debconf 0 upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 12.2MB of archives. After this operation, 37.7MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file libpcre3 libglib2.0-0 libxml2 bsdmainutils gettext-base groff-base libexpat1 liburi-perl libhtml-tagset-perl libhtml-parser-perl libhtml-tree-perl libwww-perl libxml-parser-perl man-db m4 autoconf autotools-dev automake html2text libcroco3 gettext intltool-debian po-debconf debhelper fdupes intltool cdbs libkpathsea5 libkpathsea-dev Authentication warning overridden. Get:1 http://ftpmaster.internal lucid/main libmagic1 5.03-5 [400kB] Get:2 http://ftpmaster.internal lucid/main file 5.03-5 [47.9kB] Get:3 http://ftpmaster.internal lucid/main libpcre3 7.8-3 [215kB] Get:4 http://ftpmaster.internal lucid/main libglib2.0-0 2.23.1-1ubuntu4 [1037kB] Get:5 http://ftpmaster.internal lucid/main libxml2 2.7.6.dfsg-1ubuntu1 [850kB] Get:6 http://ftpmaster.internal lucid/main bsdmainutils 8.0.1ubuntu1 [200kB] Get:7 http://ftpmaster.internal lucid/main gettext-base 0.17-8ubuntu2 [70.4kB] Get:8 http://ftpmaster.internal lucid/main groff-base 1.20.1-6 [1167kB] Get:9 http://ftpmaster.internal lucid/main libexpat1 2.0.1-7ubuntu1 [140kB] Get:10 http://ftpmaster.internal lucid/main liburi-perl 1.50-1ubuntu1 [96.8kB] Get:11 http://ftpmaster.internal lucid/main libhtml-tagset-perl 3.20-2 [13.5kB] Get:12 http://ftpmaster.internal lucid/main libhtml-parser-perl 3.64-1 [114kB] Get:13 http://ftpmaster.internal lucid/main libhtml-tree-perl 3.23-1 [209kB] Get:14 http://ftpmaster.internal lucid/main libwww-perl 5.834-1 [401kB] Get:15 http://ftpmaster.internal lucid/main libxml-parser-perl 2.36-1.1build2 [327kB] Get:16 http://ftpmaster.internal lucid/main man-db 2.5.6-5 [1116kB] Get:17 http://ftpmaster.internal lucid/main m4 1.4.13-3 [245kB] Get:18 http://ftpmaster.internal lucid/main autoconf 2.65-3ubuntu1 [772kB] Get:19 http://ftpmaster.internal lucid/main autotools-dev 20090611.1 [64.1kB] Get:20 http://ftpmaster.internal lucid/main automake 1:1.11-1 [559kB] Get:21 http://ftpmaster.internal lucid/main html2text 1.3.2a-14 [105kB] Get:22 http://ftpmaster.internal lucid/main libcroco3 0.6.2-1 [98.4kB] Get:23 http://ftpmaster.internal lucid/main gettext 0.17-8ubuntu2 [1798kB] Get:24 http://ftpmaster.internal lucid/main intltool-debian 0.35.0+20060710.1 [31.6kB] Get:25 http://ftpmaster.internal lucid/main po-debconf 1.0.16 [224kB] Get:26 http://ftpmaster.internal lucid/main debhelper 7.4.10ubuntu1 [463kB] Get:27 http://ftpmaster.internal lucid/main fdupes 1.50-PR2-2 [20.8kB] Get:28 http://ftpmaster.internal lucid/main intltool 0.41.0-0ubuntu1 [52.5kB] Get:29 http://ftpmaster.internal lucid/main cdbs 0.4.62+nmu1ubuntu4 [1023kB] Get:30 http://ftpmaster.internal lucid/main libkpathsea5 2009-5 [135kB] Get:31 http://ftpmaster.internal lucid/main libkpathsea-dev 2009-5 [178kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 12.2MB in 0s (15.8MB/s) Selecting previously deselected package libmagic1. (Reading database ... 12784 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_5.03-5_powerpc.deb) ... Selecting previously deselected package file. Unpacking file (from .../file_5.03-5_powerpc.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.8-3_powerpc.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.23.1-1ubuntu4_powerpc.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.6.dfsg-1ubuntu1_powerpc.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.0.1ubuntu1_powerpc.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-8ubuntu2_powerpc.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.20.1-6_powerpc.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-7ubuntu1_powerpc.deb) ... Selecting previously deselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.50-1ubuntu1_all.deb) ... Selecting previously deselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously deselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.64-1_powerpc.deb) ... Selecting previously deselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_3.23-1_all.deb) ... Selecting previously deselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_5.834-1_all.deb) ... Selecting previously deselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.36-1.1build2_powerpc.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.6-5_powerpc.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../m4_1.4.13-3_powerpc.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.65-3ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20090611.1_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.11-1_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-14_powerpc.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_powerpc.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-8ubuntu2_powerpc.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.4.10ubuntu1_all.deb) ... Selecting previously deselected package fdupes. Unpacking fdupes (from .../fdupes_1.50-PR2-2_powerpc.deb) ... Selecting previously deselected package intltool. Unpacking intltool (from .../intltool_0.41.0-0ubuntu1_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.62+nmu1ubuntu4_all.deb) ... Selecting previously deselected package libkpathsea5. Unpacking libkpathsea5 (from .../libkpathsea5_2009-5_powerpc.deb) ... Selecting previously deselected package libkpathsea-dev. Unpacking libkpathsea-dev (from .../libkpathsea-dev_2009-5_powerpc.deb) ... Setting up libmagic1 (5.03-5) ... Setting up file (5.03-5) ... Setting up libpcre3 (7.8-3) ... Setting up libglib2.0-0 (2.23.1-1ubuntu4) ... Setting up libxml2 (2.7.6.dfsg-1ubuntu1) ... Setting up bsdmainutils (8.0.1ubuntu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. Setting up gettext-base (0.17-8ubuntu2) ... Setting up groff-base (1.20.1-6) ... Setting up libexpat1 (2.0.1-7ubuntu1) ... Setting up liburi-perl (1.50-1ubuntu1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up libhtml-parser-perl (3.64-1) ... Setting up libhtml-tree-perl (3.23-1) ... Setting up libwww-perl (5.834-1) ... Setting up libxml-parser-perl (2.36-1.1build2) ... Setting up man-db (2.5.6-5) ... Building database of manual pages ... Setting up m4 (1.4.13-3) ... Setting up autoconf (2.65-3ubuntu1) ... Setting up autotools-dev (20090611.1) ... Setting up automake (1:1.11-1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode. Setting up html2text (1.3.2a-14) ... Setting up libcroco3 (0.6.2-1) ... Setting up gettext (0.17-8ubuntu2) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16) ... Setting up debhelper (7.4.10ubuntu1) ... Setting up fdupes (1.50-PR2-2) ... Setting up intltool (0.41.0-0ubuntu1) ... Setting up cdbs (0.4.62+nmu1ubuntu4) ... Setting up libkpathsea5 (2009-5) ... Setting up libkpathsea-dev (2009-5) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.11.1-0ubuntu1 make_3.81-7 dpkg-dev_1.15.4.1ubuntu1 g++-4.4_4.4.3-1ubuntu1 gcc-4.4_4.4.3-1ubuntu1 binutils_2.20-5ubuntu1 libstdc++6_4.4.3-1ubuntu1 libstdc++6-4.4-dev_4.4.3-1ubuntu1 ------------------------------------------------------------------------------ gpgv: Signature made Sat Jan 23 10:14:54 2010 UTC using RSA key ID 9A5323E0 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./catdvi_0.14-11build1.dsc dpkg-source: info: extracting catdvi in catdvi-0.14 dpkg-source: info: unpacking catdvi_0.14.orig.tar.gz dpkg-source: info: applying catdvi_0.14-11build1.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package catdvi dpkg-buildpackage: source version 0.14-11build1 dpkg-buildpackage: host architecture powerpc /usr/bin/fakeroot debian/rules clean test -x debian/rules dh_testroot /usr/bin/make -C . -k distclean make[1]: Entering directory `/build/buildd/catdvi-0.14' GNUmakefile:25: config.mk: No such file or directory GNUmakefile:43: *** Sorry. Stop. make[1]: Leaving directory `/build/buildd/catdvi-0.14' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-build dh_clean rm -f debian/stamp-autotools-files /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/build/buildd/catdvi-0.14' make[1]: Nothing to be done for `reverse-config'. make[1]: Leaving directory `/build/buildd/catdvi-0.14' if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/01_outenc_num_403867.diff Patch debian/patches/01_outenc_num_403867.diff is not applied. if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "reverse-patches" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi for dir in debian/patches ; do \ rm -f $dir/*.log ; \ done if [ -f update-config-stamp ] ; then \ mv d-r-orig/* . ; \ rmdir d-r-orig ; \ rm update-config-stamp ; \ fi debian/rules build test -x debian/rules mkdir -p "." /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/build/buildd/catdvi-0.14' make[1]: Nothing to be done for `reverse-config'. make[1]: Leaving directory `/build/buildd/catdvi-0.14' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/01_outenc_num_403867.diff Trying patch debian/patches/01_outenc_num_403867.diff at level 1 ... success. if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi make[1]: Entering directory `/build/buildd/catdvi-0.14' mkdir d-r-orig cp -p *.d version.h d-r-orig touch update-config-stamp make[1]: Leaving directory `/build/buildd/catdvi-0.14' touch debian/stamp-autotools-files chmod a+x /build/buildd/catdvi-0.14/./configure cd . && CFLAGS="-g -O2 -g -Wall -O2" CXXFLAGS="-g -O2 -g -Wall -O2" CPPFLAGS="" LDFLAGS="-Wl,-Bsymbolic-functions" /build/buildd/catdvi-0.14/./configure --build=powerpc-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/catdvi" --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules --srcdir=. --prefix=/usr --mandir=\${prefix}/share/man creating cache ./config.cache checking for gcc... gcc checking whether the C compiler (gcc -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions) works... yes checking whether the C compiler (gcc -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking for getopt_long... yes checking for kpse_set_program_name in -lkpathsea... yes updating cache ./config.cache creating ./config.status creating config.mk creating version.h /usr/bin/make -C . catdvi make[1]: Entering directory `/build/buildd/catdvi-0.14' set -e; gcc -MM -DCFG_HAS_GETOPT_LONG tfminfo.c | \ sed 's/\(tfminfo\)\.o[ :]*/\1.o tfminfo.d : /g' > tfminfo.d; \ [ -s tfminfo.d ] || rm -f tfminfo.d set -e; gcc -MM -DCFG_HAS_GETOPT_LONG readdvi.c | \ sed 's/\(readdvi\)\.o[ :]*/\1.o readdvi.d : /g' > readdvi.d; \ [ -s readdvi.d ] || rm -f readdvi.d set -e; gcc -MM -DCFG_HAS_GETOPT_LONG page.c | \ sed 's/\(page\)\.o[ :]*/\1.o page.d : /g' > page.d; \ [ -s page.d ] || rm -f page.d gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o adobe2h.o adobe2h.c gcc -Wl,-Bsymbolic-functions adobe2h.o -lkpathsea -o adobe2h ./adobe2h > glyphenm.h set -e; gcc -MM -DCFG_HAS_GETOPT_LONG outenc.c | \ sed 's/\(outenc\)\.o[ :]*/\1.o outenc.d : /g' > outenc.d; \ [ -s outenc.d ] || rm -f outenc.d set -e; gcc -MM -DCFG_HAS_GETOPT_LONG layout.c | \ sed 's/\(layout\)\.o[ :]*/\1.o layout.d : /g' > layout.d; \ [ -s layout.d ] || rm -f layout.d set -e; gcc -MM -DCFG_HAS_GETOPT_LONG kpathsea.c | \ sed 's/\(kpathsea\)\.o[ :]*/\1.o kpathsea.d : /g' > kpathsea.d; \ [ -s kpathsea.d ] || rm -f kpathsea.d set -e; gcc -MM -DCFG_HAS_GETOPT_LONG glyphops.c | \ sed 's/\(glyphops\)\.o[ :]*/\1.o glyphops.d : /g' > glyphops.d; \ [ -s glyphops.d ] || rm -f glyphops.d set -e; gcc -MM -DCFG_HAS_GETOPT_LONG fontinfo.c | \ sed 's/\(fontinfo\)\.o[ :]*/\1.o fontinfo.d : /g' > fontinfo.d; \ [ -s fontinfo.d ] || rm -f fontinfo.d gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o pse2unic.o pse2unic.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o util.o util.c gcc -Wl,-Bsymbolic-functions pse2unic.o util.o -lkpathsea -o pse2unic ./pse2unic -w enc/amssymba.enc enc/amssymba.h enc/amssymba.tex ./pse2unic -w enc/amssymbb.enc enc/amssymbb.h enc/amssymbb.tex ./pse2unic -w enc/blackboard.enc enc/blackboard.h enc/blackboard.tex ./pse2unic -w enc/cork.enc enc/cork.h enc/cork.tex ./pse2unic -w enc/dummy.enc enc/dummy.h enc/dummy.tex ./pse2unic -w enc/euex.enc enc/euex.h enc/euex.tex ./pse2unic -w enc/eufrak.enc enc/eufrak.h enc/eufrak.tex ./pse2unic -w enc/eurosym.enc enc/eurosym.h enc/eurosym.tex ./pse2unic -w enc/latexsym.enc enc/latexsym.h enc/latexsym.tex ./pse2unic -w enc/marvo00.enc enc/marvo00.h enc/marvo00.tex ./pse2unic -w enc/marvo98.enc enc/marvo98.h enc/marvo98.tex ./pse2unic -w enc/ot1.enc enc/ot1.h enc/ot1.tex ./pse2unic -w enc/ot1wofl.enc enc/ot1wofl.h enc/ot1wofl.tex ./pse2unic -w enc/texmext.enc enc/texmext.h enc/texmext.tex ./pse2unic -w enc/texmital.enc enc/texmital.h enc/texmital.tex ./pse2unic: suppressed 2 warnings ./pse2unic -w enc/texmsym.enc enc/texmsym.h enc/texmsym.tex ./pse2unic: suppressed 1 warnings ./pse2unic -w enc/textcomp.enc enc/textcomp.h enc/textcomp.tex ./pse2unic -w enc/textt.enc enc/textt.h enc/textt.tex set -e; gcc -MM -DCFG_HAS_GETOPT_LONG fntenc.c | \ sed 's/\(fntenc\)\.o[ :]*/\1.o fntenc.d : /g' > fntenc.d; \ [ -s fntenc.d ] || rm -f fntenc.d set -e; gcc -MM -DCFG_HAS_GETOPT_LONG catdvi.c | \ sed 's/\(catdvi\)\.o[ :]*/\1.o catdvi.d : /g' > catdvi.d; \ [ -s catdvi.d ] || rm -f catdvi.d set -e; gcc -MM -DCFG_HAS_GETOPT_LONG canvas.c | \ sed 's/\(canvas\)\.o[ :]*/\1.o canvas.d : /g' > canvas.d; \ [ -s canvas.d ] || rm -f canvas.d make[1]: Leaving directory `/build/buildd/catdvi-0.14' make[1]: Entering directory `/build/buildd/catdvi-0.14' gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o catdvi.o catdvi.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o bytesex.o bytesex.c bytesex.c: In function 'efread': bytesex.c:39: warning: format not a string literal and no format arguments gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o fixword.o fixword.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o fntenc.o fntenc.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o fontinfo.o fontinfo.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o outenc.o outenc.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o page.o page.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o readdvi.o readdvi.c readdvi.c: In function 'process_file': readdvi.c:160: warning: 'c' may be used uninitialized in this function gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o regsta.o regsta.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o glyphops.o glyphops.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o linebuf.o linebuf.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o density.o density.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o sparse.o sparse.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o pageref.o pageref.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o vlist.o vlist.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o canvas.o canvas.c gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o layout.o layout.c layout.c: In function 'page_print_sequential': layout.c:315: warning: 'prev_box.x' may be used uninitialized in this function layout.c:315: warning: 'prev_box.font' may be used uninitialized in this function layout.c:315: warning: 'prev_box.y' may be used uninitialized in this function gcc -g -O2 -g -Wall -O2 -DCFG_HAS_GETOPT_LONG -c -o kpathsea.o kpathsea.c gcc -Wl,-Bsymbolic-functions catdvi.o bytesex.o fixword.o fntenc.o fontinfo.o outenc.o page.o readdvi.o regsta.o util.o glyphops.o linebuf.o density.o sparse.o pageref.o vlist.o canvas.o layout.o kpathsea.o -lkpathsea -o catdvi make[1]: Leaving directory `/build/buildd/catdvi-0.14' touch debian/stamp-makefile-build DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/fakeroot debian/rules binary-arch test -x debian/rules dh_testroot dh_clean -k dh_installdirs -A mkdir -p "." DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/make -C . install prefix=/build/buildd/catdvi-0.14/debian/catdvi/usr make[1]: Entering directory `/build/buildd/catdvi-0.14' install catdvi /build/buildd/catdvi-0.14/debian/catdvi/usr/bin/catdvi install catdvi.1 /build/buildd/catdvi-0.14/debian/catdvi/usr/share/man/man1/catdvi.1 make[1]: Leaving directory `/build/buildd/catdvi-0.14' dh_installdirs -pcatdvi dh_installdocs -pcatdvi ./README ./NEWS ./TODO ./AUTHORS dh_installexamples -pcatdvi dh_installman -pcatdvi dh_installinfo -pcatdvi dh_installmenu -pcatdvi dh_installcron -pcatdvi dh_installinit -pcatdvi dh_installdebconf -pcatdvi dh_installemacsen -pcatdvi dh_installcatalogs -pcatdvi dh_installpam -pcatdvi dh_installlogrotate -pcatdvi dh_installlogcheck -pcatdvi dh_installchangelogs -pcatdvi dh_installudev -pcatdvi dh_lintian -pcatdvi dh_install -pcatdvi dh_link -pcatdvi dh_installmime -pcatdvi dh_strip -pcatdvi dh_strip debug symbol extraction: all non-arch-all packages for this build platform powerpc: catdvi dh_strip debug symbol extraction: packages to act on: catdvi dh_strip debug symbol extraction: ignored packages: WARNING: not running pkgbinarymangler for this package, as requested dpkg-deb: building package `catdvi-dbgsym' in `../catdvi-dbgsym_0.14-11build1_powerpc.ddeb'. dh_compress -pcatdvi dh_fixperms -pcatdvi dh_makeshlibs -pcatdvi dh_installdeb -pcatdvi dh_perl -pcatdvi dh_shlibdeps -pcatdvi dh_gencontrol -pcatdvi # symlink identical documentation to depending packages [ -n "$CDBS_NO_DOC_SYMLINKING" ] || \ [ -h debian/catdvi/usr/share/doc ] || \ [ ! -d debian/catdvi/usr/share/doc ] || \ for dep in `perl -ne 'if (/^(Pre-)?Depends:/) {s/^\w+://; foreach (split /,/) { split; print($_[0], "\n"); } }' debian/catdvi/DEBIAN/control`; do \ if [ -d debian/$dep/usr/share/doc ]; then \ echo "Searching for duplicated docs in dependency $dep..."; \ rootdir=`pwd`; \ (cd debian/catdvi/usr/share/doc/catdvi; find -type f ! -name copyright | while read f; do \ thisfile="$rootdir/debian/catdvi/usr/share/doc/catdvi/$f"; \ depfile="$rootdir/debian/$dep/usr/share/doc/$dep/$f"; \ if [ -f $depfile -o -L $depfile ] && zcmp $thisfile $depfile >/dev/null; then \ echo " symlinking $f in catdvi to file in $dep"; \ rm $thisfile; ln -s /usr/share/doc/$dep/$f $thisfile; \ fi; \ done ); \ fi; \ done # symlink identical Gnome help files within packages if [ -z "$CDBS_NO_GNOME_HELP_SYMLINKING" ] && [ -d debian/catdvi/usr/share/gnome/help ]; then \ cd debian/catdvi && LC_ALL=C fdupes -r1nq usr/share/gnome/help | while read s; do \ set -- $(echo $s | tr ' ' '\n' | sort); \ f=$1; shift; \ for d; do \ echo "symlinking duplicate Gnome help file $d to $f"; \ rm $d; ln -s /$f $d; \ done; \ done; \ fi dh_link -p catdvi dh_md5sums -pcatdvi dh_builddeb -pcatdvi pkgstriptranslations: processing control file: ./debian/catdvi/DEBIAN/control, package catdvi, directory ./debian/catdvi pkgstriptranslations: catdvi does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgstriptranslations: static tarball already exists pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " dpkg-deb: warning: 'debian/catdvi/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warnings about the control file(s) dpkg-deb: building package `catdvi' in `../catdvi_0.14-11build1_powerpc.deb'. dpkg-genchanges -B -mUbuntu/powerpc Build Daemon >../catdvi_0.14-11build1_powerpc.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20100123-1021 Publishing debug debs. chroot-autobuild/build/buildd/catdvi_0.14-11build1_powerpc.deb: new debian package, version 2.0. size 57306 bytes: control archive= 1253 bytes. 1322 bytes, 29 lines control 647 bytes, 10 lines md5sums Package: catdvi Version: 0.14-11build1 Architecture: powerpc Maintainer: Ubuntu Developers Original-Maintainer: Bart Martens Installed-Size: 176 Depends: libc6 (>= 2.4), libkpathsea5, texlive-base, texlive-base-bin Recommends: texlive-fonts-recommended Section: tex Priority: extra Homepage: http://catdvi.sourceforge.net/ Description: DVI to plain text translator CatDVI translates a TeX Device Independent (DVI) file into a readable plaintext file. It aims to generate high-quality output that reproduces all aspects of the DVI file within the limits of the output medium. CatDVI uses Unicode internally and can output ASCII, ISO Latin 1 and UTF-8 Unicode. . CatDVI can be used for previewing TeX documents on character-cell displays such as traditional terminals and terminal emulators. It is also possible to use it in generation of plain text documents from TeX source, assuming that the document is written with this conversion in mind. . CatDVI is under development and as such yet incomplete. However, it is quite useful even in its current form and already outperforms some of its competition in some areas. . CatDVI requires that the TFM files for all fonts used in its input DVI files are installed or can be generated by kpathsea. chroot-autobuild/build/buildd/catdvi_0.14-11build1_powerpc.deb: drwxr-xr-x root/root 0 2010-01-23 10:21:39 ./ drwxr-xr-x root/root 0 2010-01-23 10:21:37 ./usr/ drwxr-xr-x root/root 0 2010-01-23 10:21:43 ./usr/bin/ -rwxr-xr-x root/root 97460 2010-01-23 10:21:43 ./usr/bin/catdvi drwxr-xr-x root/root 0 2010-01-23 10:21:37 ./usr/share/ drwxr-xr-x root/root 0 2010-01-23 10:21:37 ./usr/share/man/ drwxr-xr-x root/root 0 2010-01-23 10:21:44 ./usr/share/man/man1/ -rw-r--r-- root/root 3959 2010-01-23 10:21:38 ./usr/share/man/man1/catdvi.1.gz drwxr-xr-x root/root 0 2010-01-23 10:21:37 ./usr/share/doc/ drwxr-xr-x root/root 0 2010-01-23 10:21:44 ./usr/share/doc/catdvi/ -rw-r--r-- root/root 1040 2002-11-17 18:37:09 ./usr/share/doc/catdvi/AUTHORS -rw-r--r-- root/root 1488 2002-11-17 18:38:54 ./usr/share/doc/catdvi/NEWS.gz -rw-r--r-- root/root 2026 2010-01-23 10:21:23 ./usr/share/doc/catdvi/changelog.Debian.gz -rw-r--r-- root/root 3470 2002-11-17 18:38:54 ./usr/share/doc/catdvi/README -rw-r--r-- root/root 3704 2002-11-17 18:37:09 ./usr/share/doc/catdvi/TODO -rw-r--r-- root/root 1678 2010-01-23 10:21:23 ./usr/share/doc/catdvi/copyright -rw-r--r-- root/root 4171 2002-11-24 18:33:46 ./usr/share/doc/catdvi/catdvi.txt.gz -rw-r--r-- root/root 107 2001-02-07 17:02:32 ./usr/share/doc/catdvi/changelog-authors.gz catdvi_0.14-11build1_powerpc.changes: Format: 1.8 Date: Sat, 23 Jan 2010 11:11:39 +0100 Source: catdvi Binary: catdvi Architecture: powerpc Version: 0.14-11build1 Distribution: lucid Urgency: low Maintainer: Ubuntu/powerpc Build Daemon Changed-By: Michael Bienia Description: catdvi - DVI to plain text translator Changes: catdvi (0.14-11build1) lucid; urgency=low . * No-change rebuild for libkpathsea4 → libkpathsea5 transition. (lp: #511502) Checksums-Sha1: 2f3852dee4c622fd3da8532ff963a788be8085eb 57306 catdvi_0.14-11build1_powerpc.deb Checksums-Sha256: d12c572bc58b4da7fe7c375688854eaeeca04ec33e780494e5a993ea1fae1b5f 57306 catdvi_0.14-11build1_powerpc.deb Files: 3927c3d21f8e45dd3c5ef32aa9c29285 57306 tex extra catdvi_0.14-11build1_powerpc.deb Launchpad-Bugs-Fixed: 511502 ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/catdvi-0.14 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge intltool-debian groff-base libglib2.0-0 m4 gettext file libhtml-parser-perl intltool cdbs libwww-perl liburi-perl html2text gettext-base libkpathsea5 debhelper libhtml-tree-perl autotools-dev po-debconf libkpathsea-dev libxml-parser-perl libcroco3 libmagic1 libhtml-tagset-perl libxml2 libexpat1 bsdmainutils fdupes automake libpcre3 man-db autoconf (Reading database ... 14652 files and directories currently installed.) Removing cdbs ... Removing debhelper ... Removing po-debconf ... Removing libkpathsea-dev ... Removing fdupes ... Removing man-db ... Purging configuration files for man-db ... Removing intltool-debian ... Removing groff-base ... Purging configuration files for groff-base ... Removing intltool ... Removing html2text ... Purging configuration files for html2text ... Removing libkpathsea5 ... Purging configuration files for libkpathsea5 ... Removing libxml-parser-perl ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing automake ... Removing autoconf ... Purging configuration files for autoconf ... Removing m4 ... Removing gettext ... Removing file ... Purging configuration files for file ... Removing libwww-perl ... Removing gettext-base ... Removing libhtml-tree-perl ... Removing autotools-dev ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing libhtml-parser-perl ... Removing liburi-perl ... Removing libhtml-tagset-perl ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20100123-1021 Build needed 00:00:26, 2900k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '1463539-3007936'] Scanning for processes to kill in build /home/buildd/build-1463539-3007936/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '1463539-3007936'] Unmounting chroot for build 1463539-3007936... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '1463539-3007936'] Removing build 1463539-3007936