RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '1482756-3043429', '/home/buildd/filecache-default/69315e5c826cb52f9fad21f67604a64b5e7eb55c'] Synching the system clock with the buildd NTP service... 4 Feb 00:35:25 ntpdate[30132]: adjust time server 10.122.37.1 offset 0.000280 sec Unpacking chroot for build 1482756-3043429 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '1482756-3043429'] Mounting chroot for build 1482756-3043429 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '1482756-3043429', 'universe'] Attempting OGRE for universe in build-1482756-3043429 No OGRE sources.list found. RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '1482756-3043429', 'deb http://ftpmaster.internal/ubuntu lucid main universe'] Overriding sources.list in build-1482756-3043429 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '1482756-3043429'] Updating debian chroot for build 1482756-3043429 Get:1 http://ftpmaster.internal lucid Release.gpg [189B] Get:2 http://ftpmaster.internal lucid Release [57.2kB] Get:3 http://ftpmaster.internal lucid/main Packages [1418kB] Get:4 http://ftpmaster.internal lucid/universe Packages [5401kB] Fetched 6877kB in 4s (1640kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: apt apt-transport-https cpp-4.4 g++-4.4 gcc-4.4 gcc-4.4-base gzip libc-bin libc-dev-bin libc6 libc6-dev libgcc1 libgmp3c2 libgomp1 libgssapi-krb5-2 libk5crypto3 libkrb5-3 libkrb5support0 libpam-modules libpam-runtime libpam0g libplymouth2 libpng12-0 libssl0.9.8 libstdc++6 libstdc++6-4.4-dev linux-libc-dev locales login openssl passwd python2.6-minimal tzdata 33 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 35.0MB of archives. After this operation, 20.5kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! gzip login libpam-modules libc-dev-bin libc6-dev libc-bin libc6 linux-libc-dev libgomp1 cpp-4.4 gcc-4.4-base libgcc1 gcc-4.4 g++-4.4 libstdc++6-4.4-dev libstdc++6 libgmp3c2 tzdata apt libpam-runtime libpam0g libssl0.9.8 passwd python2.6-minimal libgssapi-krb5-2 libkrb5-3 libkrb5support0 libk5crypto3 openssl libpng12-0 libplymouth2 locales apt-transport-https Authentication warning overridden. Get:1 http://ftpmaster.internal lucid/main gzip 1.3.12-9ubuntu1 [107kB] Get:2 http://ftpmaster.internal lucid/main login 1:4.1.4.2-1ubuntu2 [324kB] Get:3 http://ftpmaster.internal lucid/main libpam-modules 1.1.1-1ubuntu1 [378kB] Get:4 http://ftpmaster.internal lucid/main libc-dev-bin 2.11.1-0ubuntu2 [222kB] Get:5 http://ftpmaster.internal lucid/main libc6-dev 2.11.1-0ubuntu2 [2689kB] Get:6 http://ftpmaster.internal lucid/main libc-bin 2.11.1-0ubuntu2 [799kB] Get:7 http://ftpmaster.internal lucid/main libc6 2.11.1-0ubuntu2 [4242kB] Get:8 http://ftpmaster.internal lucid/main linux-libc-dev 2.6.32-12.16 [743kB] Get:9 http://ftpmaster.internal lucid/main libgomp1 4.4.3-2ubuntu1 [25.5kB] Get:10 http://ftpmaster.internal lucid/main cpp-4.4 4.4.3-2ubuntu1 [3900kB] Get:11 http://ftpmaster.internal lucid/main gcc-4.4-base 4.4.3-2ubuntu1 [117kB] Get:12 http://ftpmaster.internal lucid/main libgcc1 1:4.4.3-2ubuntu1 [44.9kB] Get:13 http://ftpmaster.internal lucid/main gcc-4.4 4.4.3-2ubuntu1 [2873kB] Get:14 http://ftpmaster.internal lucid/main g++-4.4 4.4.3-2ubuntu1 [5494kB] Get:15 http://ftpmaster.internal lucid/main libstdc++6-4.4-dev 4.4.3-2ubuntu1 [1526kB] Get:16 http://ftpmaster.internal lucid/main libstdc++6 4.4.3-2ubuntu1 [342kB] Get:17 http://ftpmaster.internal lucid/main libgmp3c2 2:4.3.2+dfsg-1 [315kB] Get:18 http://ftpmaster.internal lucid/main tzdata 2010b-1 [682kB] Get:19 http://ftpmaster.internal lucid/main apt 0.7.25ubuntu4 [1792kB] Get:20 http://ftpmaster.internal lucid/main libpam-runtime 1.1.1-1ubuntu1 [114kB] Get:21 http://ftpmaster.internal lucid/main libpam0g 1.1.1-1ubuntu1 [126kB] Get:22 http://ftpmaster.internal lucid/main libssl0.9.8 0.9.8k-7ubuntu5 [968kB] Get:23 http://ftpmaster.internal lucid/main passwd 1:4.1.4.2-1ubuntu2 [954kB] Get:24 http://ftpmaster.internal lucid/main python2.6-minimal 2.6.4-5ubuntu1 [1440kB] Get:25 http://ftpmaster.internal lucid/main libgssapi-krb5-2 1.8+dfsg~alpha1-5 [126kB] Get:26 http://ftpmaster.internal lucid/main libkrb5-3 1.8+dfsg~alpha1-5 [370kB] Get:27 http://ftpmaster.internal lucid/main libkrb5support0 1.8+dfsg~alpha1-5 [42.9kB] Get:28 http://ftpmaster.internal lucid/main libk5crypto3 1.8+dfsg~alpha1-5 [103kB] Get:29 http://ftpmaster.internal lucid/main openssl 0.9.8k-7ubuntu5 [406kB] Get:30 http://ftpmaster.internal lucid/main libpng12-0 1.2.42-1ubuntu1 [180kB] Get:31 http://ftpmaster.internal lucid/main libplymouth2 0.8.0~-8 [82.1kB] Get:32 http://ftpmaster.internal lucid/main locales 2.9+git20090617-4 [3392kB] Get:33 http://ftpmaster.internal lucid/main apt-transport-https 0.7.25ubuntu4 [78.1kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.0MB in 1s (27.6MB/s) (Reading database ... 12782 files and directories currently installed.) Preparing to replace gzip 1.3.12-8ubuntu1 (using .../gzip_1.3.12-9ubuntu1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Setting up gzip (1.3.12-9ubuntu1) ... (Reading database ... 12782 files and directories currently installed.) Preparing to replace login 1:4.1.4.2-1ubuntu1 (using .../login_1%3a4.1.4.2-1ubuntu2_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.4.2-1ubuntu2) ... (Reading database ... 12785 files and directories currently installed.) Preparing to replace libpam-modules 1.1.0-4ubuntu3 (using .../libpam-modules_1.1.1-1ubuntu1_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.1-1ubuntu1) ... (Reading database ... 12786 files and directories currently installed.) Preparing to replace libc-dev-bin 2.11.1-0ubuntu1 (using .../libc-dev-bin_2.11.1-0ubuntu2_amd64.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6-dev 2.11.1-0ubuntu1 (using .../libc6-dev_2.11.1-0ubuntu2_amd64.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-bin 2.11.1-0ubuntu1 (using .../libc-bin_2.11.1-0ubuntu2_amd64.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.11.1-0ubuntu2) ... (Reading database ... 12786 files and directories currently installed.) Preparing to replace libc6 2.11.1-0ubuntu1 (using .../libc6_2.11.1-0ubuntu2_amd64.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.11.1-0ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12786 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.32-10.14 (using .../linux-libc-dev_2.6.32-12.16_amd64.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libgomp1 4.4.2-9ubuntu4 (using .../libgomp1_4.4.3-2ubuntu1_amd64.deb) ... Unpacking replacement libgomp1 ... Preparing to replace cpp-4.4 4.4.2-9ubuntu4 (using .../cpp-4.4_4.4.3-2ubuntu1_amd64.deb) ... Unpacking replacement cpp-4.4 ... Preparing to replace gcc-4.4-base 4.4.2-9ubuntu4 (using .../gcc-4.4-base_4.4.3-2ubuntu1_amd64.deb) ... Unpacking replacement gcc-4.4-base ... Setting up gcc-4.4-base (4.4.3-2ubuntu1) ... (Reading database ... 12785 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.2-9ubuntu4 (using .../libgcc1_1%3a4.4.3-2ubuntu1_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.3-2ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12785 files and directories currently installed.) Preparing to replace gcc-4.4 4.4.2-9ubuntu4 (using .../gcc-4.4_4.4.3-2ubuntu1_amd64.deb) ... Unpacking replacement gcc-4.4 ... Preparing to replace g++-4.4 4.4.2-9ubuntu4 (using .../g++-4.4_4.4.3-2ubuntu1_amd64.deb) ... Unpacking replacement g++-4.4 ... Preparing to replace libstdc++6-4.4-dev 4.4.2-9ubuntu4 (using .../libstdc++6-4.4-dev_4.4.3-2ubuntu1_amd64.deb) ... Unpacking replacement libstdc++6-4.4-dev ... Preparing to replace libstdc++6 4.4.2-9ubuntu4 (using .../libstdc++6_4.4.3-2ubuntu1_amd64.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.3-2ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12785 files and directories currently installed.) Preparing to replace libgmp3c2 2:4.3.1+dfsg-3 (using .../libgmp3c2_2%3a4.3.2+dfsg-1_amd64.deb) ... Unpacking replacement libgmp3c2 ... Preparing to replace tzdata 2009u-1 (using .../tzdata_2010b-1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2010b-1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Feb 4 00:35:59 UTC 2010. Universal Time is now: Thu Feb 4 00:35:59 UTC 2010. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... 12794 files and directories currently installed.) Preparing to replace apt 0.7.25ubuntu2 (using .../apt_0.7.25ubuntu4_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.7.25ubuntu4) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12794 files and directories currently installed.) Preparing to replace libpam-runtime 1.1.0-4ubuntu3 (using .../libpam-runtime_1.1.1-1ubuntu1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.1-1ubuntu1) ... (Reading database ... 12794 files and directories currently installed.) Preparing to replace libpam0g 1.1.0-4ubuntu3 (using .../libpam0g_1.1.1-1ubuntu1_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.1-1ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12794 files and directories currently installed.) Preparing to replace libssl0.9.8 0.9.8k-7ubuntu4 (using .../libssl0.9.8_0.9.8k-7ubuntu5_amd64.deb) ... Unpacking replacement libssl0.9.8 ... Setting up libssl0.9.8 (0.9.8k-7ubuntu5) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12794 files and directories currently installed.) Preparing to replace passwd 1:4.1.4.2-1ubuntu1 (using .../passwd_1%3a4.1.4.2-1ubuntu2_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.4.2-1ubuntu2) ... (Reading database ... 12794 files and directories currently installed.) Preparing to replace python2.6-minimal 2.6.4-1ubuntu2 (using .../python2.6-minimal_2.6.4-5ubuntu1_amd64.deb) ... Unpacking replacement python2.6-minimal ... Setting up python2.6-minimal (2.6.4-5ubuntu1) ... Linking and byte-compiling packages for runtime python2.6... (Reading database ... 12794 files and directories currently installed.) Preparing to replace libgssapi-krb5-2 1.7+dfsg-4 (using .../libgssapi-krb5-2_1.8+dfsg~alpha1-5_amd64.deb) ... Unpacking replacement libgssapi-krb5-2 ... Preparing to replace libkrb5-3 1.7+dfsg-4 (using .../libkrb5-3_1.8+dfsg~alpha1-5_amd64.deb) ... Unpacking replacement libkrb5-3 ... Preparing to replace libkrb5support0 1.7+dfsg-4 (using .../libkrb5support0_1.8+dfsg~alpha1-5_amd64.deb) ... Unpacking replacement libkrb5support0 ... Preparing to replace libk5crypto3 1.7+dfsg-4 (using .../libk5crypto3_1.8+dfsg~alpha1-5_amd64.deb) ... Unpacking replacement libk5crypto3 ... Preparing to replace openssl 0.9.8k-7ubuntu4 (using .../openssl_0.9.8k-7ubuntu5_amd64.deb) ... Unpacking replacement openssl ... Preparing to replace libpng12-0 1.2.41-1 (using .../libpng12-0_1.2.42-1ubuntu1_amd64.deb) ... Unpacking replacement libpng12-0 ... Preparing to replace libplymouth2 0.8.0~-7 (using .../libplymouth2_0.8.0~-8_amd64.deb) ... Unpacking replacement libplymouth2 ... Preparing to replace locales 2.9+git20090617-3 (using .../locales_2.9+git20090617-4_all.deb) ... Unpacking replacement locales ... Preparing to replace apt-transport-https 0.7.25ubuntu2 (using .../apt-transport-https_0.7.25ubuntu4_amd64.deb) ... Unpacking replacement apt-transport-https ... Setting up libc-dev-bin (2.11.1-0ubuntu2) ... Setting up linux-libc-dev (2.6.32-12.16) ... Setting up libc6-dev (2.11.1-0ubuntu2) ... Setting up libgomp1 (4.4.3-2ubuntu1) ... Setting up libgmp3c2 (2:4.3.2+dfsg-1) ... Setting up cpp-4.4 (4.4.3-2ubuntu1) ... Setting up gcc-4.4 (4.4.3-2ubuntu1) ... Setting up libkrb5support0 (1.8+dfsg~alpha1-5) ... Setting up libk5crypto3 (1.8+dfsg~alpha1-5) ... Setting up libkrb5-3 (1.8+dfsg~alpha1-5) ... Setting up libgssapi-krb5-2 (1.8+dfsg~alpha1-5) ... Setting up openssl (0.9.8k-7ubuntu5) ... Setting up libpng12-0 (1.2.42-1ubuntu1) ... Setting up libplymouth2 (0.8.0~-8) ... Setting up locales (2.9+git20090617-4) ... Setting up apt-transport-https (0.7.25ubuntu4) ... Setting up libstdc++6-4.4-dev (4.4.3-2ubuntu1) ... Setting up g++-4.4 (4.4.3-2ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '1482756-3043429', 'lucid', '--nolog', '--batch', '--archive=ubuntu', '--dist=lucid', '--purpose=PRIMARY', '--comp=universe', 'cx-freeze_4.0.1-0ubuntu3.dsc'] Initiating build 1482756-3043429 with 2 processor cores. Automatic build of cx-freeze_4.0.1-0ubuntu3 on yellow by sbuild/amd64 1.170.5 Build started at 20100204-0036 ****************************************************************************** cx-freeze_4.0.1-0ubuntu3.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: cdbs (>= 0.4.49), debhelper (>= 5.0.38), python-all-dev (>= 2.4), python-support (>= 0.5.3), zlib1g-dev, chrpath Checking for already installed source dependencies... cdbs: missing debhelper: missing python-all-dev: missing python-support: missing zlib1g-dev: missing chrpath: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install cdbs debhelper python-all-dev python-support zlib1g-dev chrpath Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf automake autotools-dev bsdmainutils fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libexpat1 libglib2.0-0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libmagic1 libncursesw5 libpcre3 libpython2.6 libsqlite3-0 liburi-perl libwww-perl libxml-parser-perl libxml2 m4 man-db mime-support po-debconf python python-all python-dev python2.6 python2.6-dev Suggested packages: autoconf2.13 autoconf-archive gnu-standards autoconf-doc libtool wamerican wordlist whois vacation devscripts doc-base dh-make gettext-doc groff libdata-dump-perl libcrypt-ssleay-perl libio-socket-ssl-perl less www-browser libmail-box-perl python-doc python-tk python-profiler python2.6-doc python2.6-profiler Recommended packages: curl wget lynx cvs libglib2.0-data shared-mime-info libgpm2 libmailtools-perl libhtml-format-perl xml-core libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils cdbs chrpath debhelper fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libexpat1 libglib2.0-0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libmagic1 libncursesw5 libpcre3 libpython2.6 libsqlite3-0 liburi-perl libwww-perl libxml-parser-perl libxml2 m4 man-db mime-support po-debconf python python-all python-all-dev python-dev python-support python2.6 python2.6-dev zlib1g-dev 0 upgraded, 42 newly installed, 0 to remove and 0 not upgraded. Need to get 21.5MB of archives. After this operation, 67.4MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file libpcre3 libglib2.0-0 libncursesw5 libsqlite3-0 libxml2 mime-support python2.6 python bsdmainutils gettext-base groff-base libexpat1 liburi-perl libhtml-tagset-perl libhtml-parser-perl libhtml-tree-perl libwww-perl libxml-parser-perl man-db python-support m4 autoconf autotools-dev automake html2text libcroco3 gettext intltool-debian po-debconf debhelper fdupes intltool cdbs chrpath libpython2.6 python-all python2.6-dev python-dev python-all-dev zlib1g-dev Authentication warning overridden. Get:1 http://ftpmaster.internal lucid/main libmagic1 5.03-5 [392kB] Get:2 http://ftpmaster.internal lucid/main file 5.03-5 [47.9kB] Get:3 http://ftpmaster.internal lucid/main libpcre3 7.8-3 [216kB] Get:4 http://ftpmaster.internal lucid/main libglib2.0-0 2.23.2-2ubuntu3 [1065kB] Get:5 http://ftpmaster.internal lucid/main libncursesw5 5.7+20090803-2ubuntu2 [229kB] Get:6 http://ftpmaster.internal lucid/main libsqlite3-0 3.6.21-2 [304kB] Get:7 http://ftpmaster.internal lucid/main libxml2 2.7.6.dfsg-1ubuntu1 [871kB] Get:8 http://ftpmaster.internal lucid/main mime-support 3.48-1ubuntu1 [34.6kB] Get:9 http://ftpmaster.internal lucid/main python2.6 2.6.4-5ubuntu1 [2519kB] Get:10 http://ftpmaster.internal lucid/main python 2.6.4-0ubuntu2 [141kB] Get:11 http://ftpmaster.internal lucid/main bsdmainutils 8.0.1ubuntu1 [199kB] Get:12 http://ftpmaster.internal lucid/main gettext-base 0.17-8ubuntu2 [78.4kB] Get:13 http://ftpmaster.internal lucid/main groff-base 1.20.1-6 [1129kB] Get:14 http://ftpmaster.internal lucid/main libexpat1 2.0.1-7ubuntu1 [138kB] Get:15 http://ftpmaster.internal lucid/main liburi-perl 1.50-1ubuntu1 [96.8kB] Get:16 http://ftpmaster.internal lucid/main libhtml-tagset-perl 3.20-2 [13.5kB] Get:17 http://ftpmaster.internal lucid/main libhtml-parser-perl 3.64-1 [114kB] Get:18 http://ftpmaster.internal lucid/main libhtml-tree-perl 3.23-1 [209kB] Get:19 http://ftpmaster.internal lucid/main libwww-perl 5.834-1 [401kB] Get:20 http://ftpmaster.internal lucid/main libxml-parser-perl 2.36-1.1build2 [324kB] Get:21 http://ftpmaster.internal lucid/main man-db 2.5.6-5 [1385kB] Get:22 http://ftpmaster.internal lucid/main python-support 1.0.4ubuntu1 [32.0kB] Get:23 http://ftpmaster.internal lucid/main m4 1.4.13-3 [286kB] Get:24 http://ftpmaster.internal lucid/main autoconf 2.65-3ubuntu1 [772kB] Get:25 http://ftpmaster.internal lucid/main autotools-dev 20090611.1 [64.1kB] Get:26 http://ftpmaster.internal lucid/main automake 1:1.11.1-1 [608kB] Get:27 http://ftpmaster.internal lucid/main html2text 1.3.2a-14 [104kB] Get:28 http://ftpmaster.internal lucid/main libcroco3 0.6.2-1 [101kB] Get:29 http://ftpmaster.internal lucid/main gettext 0.17-8ubuntu2 [1805kB] Get:30 http://ftpmaster.internal lucid/main intltool-debian 0.35.0+20060710.1 [31.6kB] Get:31 http://ftpmaster.internal lucid/main po-debconf 1.0.16 [224kB] Get:32 http://ftpmaster.internal lucid/main debhelper 7.4.11ubuntu1 [463kB] Get:33 http://ftpmaster.internal lucid/main fdupes 1.50-PR2-2 [20.1kB] Get:34 http://ftpmaster.internal lucid/main intltool 0.41.0-0ubuntu1 [52.5kB] Get:35 http://ftpmaster.internal lucid/main cdbs 0.4.62+nmu1ubuntu4 [1023kB] Get:36 http://ftpmaster.internal lucid/main chrpath 0.13-2build1 [14.3kB] Get:37 http://ftpmaster.internal lucid/main libpython2.6 2.6.4-5ubuntu1 [1068kB] Get:38 http://ftpmaster.internal lucid/main python-all 2.6.4-0ubuntu2 [880B] Get:39 http://ftpmaster.internal lucid/main python2.6-dev 2.6.4-5ubuntu1 [4757kB] Get:40 http://ftpmaster.internal lucid/main python-dev 2.6.4-0ubuntu2 [976B] Get:41 http://ftpmaster.internal lucid/main python-all-dev 2.6.4-0ubuntu2 [896B] Get:42 http://ftpmaster.internal lucid/main zlib1g-dev 1:1.2.3.3.dfsg-15ubuntu1 [167kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 21.5MB in 0s (25.1MB/s) Selecting previously deselected package libmagic1. (Reading database ... 12795 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_5.03-5_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_5.03-5_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.8-3_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.23.2-2ubuntu3_amd64.deb) ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20090803-2ubuntu2_amd64.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.6.21-2_amd64.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.6.dfsg-1ubuntu1_amd64.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.48-1ubuntu1_all.deb) ... Selecting previously deselected package python2.6. Unpacking python2.6 (from .../python2.6_2.6.4-5ubuntu1_amd64.deb) ... Selecting previously deselected package python. Unpacking python (from .../python_2.6.4-0ubuntu2_all.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.0.1ubuntu1_amd64.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-8ubuntu2_amd64.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.20.1-6_amd64.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-7ubuntu1_amd64.deb) ... Selecting previously deselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.50-1ubuntu1_all.deb) ... Selecting previously deselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously deselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.64-1_amd64.deb) ... Selecting previously deselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_3.23-1_all.deb) ... Selecting previously deselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_5.834-1_all.deb) ... Selecting previously deselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.36-1.1build2_amd64.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.6-5_amd64.deb) ... Selecting previously deselected package python-support. Unpacking python-support (from .../python-support_1.0.4ubuntu1_all.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../archives/m4_1.4.13-3_amd64.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.65-3ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20090611.1_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.11.1-1_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-14_amd64.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_amd64.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-8ubuntu2_amd64.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.4.11ubuntu1_all.deb) ... Selecting previously deselected package fdupes. Unpacking fdupes (from .../fdupes_1.50-PR2-2_amd64.deb) ... Selecting previously deselected package intltool. Unpacking intltool (from .../intltool_0.41.0-0ubuntu1_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.62+nmu1ubuntu4_all.deb) ... Selecting previously deselected package chrpath. Unpacking chrpath (from .../chrpath_0.13-2build1_amd64.deb) ... Selecting previously deselected package libpython2.6. Unpacking libpython2.6 (from .../libpython2.6_2.6.4-5ubuntu1_amd64.deb) ... Selecting previously deselected package python-all. Unpacking python-all (from .../python-all_2.6.4-0ubuntu2_all.deb) ... Selecting previously deselected package python2.6-dev. Unpacking python2.6-dev (from .../python2.6-dev_2.6.4-5ubuntu1_amd64.deb) ... Selecting previously deselected package python-dev. Unpacking python-dev (from .../python-dev_2.6.4-0ubuntu2_all.deb) ... Selecting previously deselected package python-all-dev. Unpacking python-all-dev (from .../python-all-dev_2.6.4-0ubuntu2_all.deb) ... Selecting previously deselected package zlib1g-dev. Unpacking zlib1g-dev (from .../zlib1g-dev_1%3a1.2.3.3.dfsg-15ubuntu1_amd64.deb) ... Setting up libmagic1 (5.03-5) ... Setting up file (5.03-5) ... Setting up libpcre3 (7.8-3) ... Setting up libglib2.0-0 (2.23.2-2ubuntu3) ... Setting up libncursesw5 (5.7+20090803-2ubuntu2) ... Setting up libsqlite3-0 (3.6.21-2) ... Setting up libxml2 (2.7.6.dfsg-1ubuntu1) ... Setting up mime-support (3.48-1ubuntu1) ... update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode. Setting up python2.6 (2.6.4-5ubuntu1) ... Setting up python (2.6.4-0ubuntu2) ... Setting up bsdmainutils (8.0.1ubuntu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. Setting up gettext-base (0.17-8ubuntu2) ... Setting up groff-base (1.20.1-6) ... Setting up libexpat1 (2.0.1-7ubuntu1) ... Setting up liburi-perl (1.50-1ubuntu1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up libhtml-parser-perl (3.64-1) ... Setting up libhtml-tree-perl (3.23-1) ... Setting up libwww-perl (5.834-1) ... Setting up libxml-parser-perl (2.36-1.1build2) ... Setting up man-db (2.5.6-5) ... Building database of manual pages ... Setting up python-support (1.0.4ubuntu1) ... Setting up m4 (1.4.13-3) ... Setting up autoconf (2.65-3ubuntu1) ... Setting up autotools-dev (20090611.1) ... Setting up automake (1:1.11.1-1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode. Setting up html2text (1.3.2a-14) ... Setting up libcroco3 (0.6.2-1) ... Setting up gettext (0.17-8ubuntu2) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16) ... Setting up debhelper (7.4.11ubuntu1) ... Setting up fdupes (1.50-PR2-2) ... Setting up intltool (0.41.0-0ubuntu1) ... Setting up cdbs (0.4.62+nmu1ubuntu4) ... Setting up chrpath (0.13-2build1) ... Setting up libpython2.6 (2.6.4-5ubuntu1) ... Setting up python-all (2.6.4-0ubuntu2) ... Setting up python2.6-dev (2.6.4-5ubuntu1) ... Setting up python-dev (2.6.4-0ubuntu2) ... Setting up python-all-dev (2.6.4-0ubuntu2) ... Setting up zlib1g-dev (1:1.2.3.3.dfsg-15ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.11.1-0ubuntu2 make_3.81-7 dpkg-dev_1.15.4.1ubuntu1 g++-4.4_4.4.3-2ubuntu1 gcc-4.4_4.4.3-2ubuntu1 binutils_2.20-5ubuntu1 libstdc++6_4.4.3-2ubuntu1 libstdc++6-4.4-dev_4.4.3-2ubuntu1 ------------------------------------------------------------------------------ gpgv: Signature made Thu Feb 4 00:29:26 2010 UTC using DSA key ID 0F932C9C gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./cx-freeze_4.0.1-0ubuntu3.dsc dpkg-source: info: extracting cx-freeze in cx-freeze-4.0.1 dpkg-source: info: unpacking cx-freeze_4.0.1.orig.tar.gz dpkg-source: info: applying cx-freeze_4.0.1-0ubuntu3.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package cx-freeze dpkg-buildpackage: source version 4.0.1-0ubuntu3 dpkg-buildpackage: host architecture amd64 /usr/bin/fakeroot debian/rules clean pyversions: missing XS-Python-Version in control file, fall back to debian/pyversions test -x debian/rules dh_testroot dh_clean for buildver in 2.6; do \ cd /build/buildd/cx-freeze-4.0.1 && cd . && python$buildver setup.py clean -a; \ done running clean 'build/lib.linux-x86_64-2.6' does not exist -- can't clean it 'build/bdist.linux-x86_64' does not exist -- can't clean it 'build/scripts-2.6' does not exist -- can't clean it rm -rf debian/python-module-stampdir find . -name '*.pyc' -exec rm '{}' ';' find . -prune -name '*.egg-info' -exec rm -rf '{}' ';' /usr/bin/make -f debian/rules reverse-config pyversions: missing XS-Python-Version in control file, fall back to debian/pyversions make[1]: Entering directory `/build/buildd/cx-freeze-4.0.1' make[1]: Nothing to be done for `reverse-config'. make[1]: Leaving directory `/build/buildd/cx-freeze-4.0.1' if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/setup_link_libs.patch debian/patches/setup_remove_samples.patch Patch debian/patches/setup_remove_samples.patch is not applied. Patch debian/patches/setup_link_libs.patch is not applied. if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "reverse-patches" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi for dir in debian/patches ; do \ rm -f $dir/*.log ; \ done rm -f debian/pycompat debian/rules build pyversions: missing XS-Python-Version in control file, fall back to debian/pyversions test -x debian/rules mkdir -p "." mkdir -p debian/python-module-stampdir /usr/bin/make -f debian/rules reverse-config pyversions: missing XS-Python-Version in control file, fall back to debian/pyversions make[1]: Entering directory `/build/buildd/cx-freeze-4.0.1' make[1]: Nothing to be done for `reverse-config'. make[1]: Leaving directory `/build/buildd/cx-freeze-4.0.1' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/setup_link_libs.patch debian/patches/setup_remove_samples.patch Trying patch debian/patches/setup_link_libs.patch at level 1 ... success. Trying patch debian/patches/setup_remove_samples.patch at level 1 ... success. if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi pyversions: missing XS-Python-Version in control file, fall back to debian/pyversions make[1]: Entering directory `/build/buildd/cx-freeze-4.0.1' make[1]: Nothing to be done for `update-config'. make[1]: Leaving directory `/build/buildd/cx-freeze-4.0.1' set -e; for buildver in 2.6; do \ cd /build/buildd/cx-freeze-4.0.1 && cd . && python$buildver setup.py build --build-base="/build/buildd/cx-freeze-4.0.1/./build"; \ done running build running build_py creating /build/buildd/cx-freeze-4.0.1/build creating /build/buildd/cx-freeze-4.0.1/build/lib.linux-x86_64-2.6 creating /build/buildd/cx-freeze-4.0.1/build/lib.linux-x86_64-2.6/cx_Freeze copying cx_Freeze/freezer.py -> /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze copying cx_Freeze/windist.py -> /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze copying cx_Freeze/main.py -> /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze copying cx_Freeze/finder.py -> /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze copying cx_Freeze/__init__.py -> /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze copying cx_Freeze/hooks.py -> /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze copying cx_Freeze/dist.py -> /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze running build_ext building 'cx_Freeze.util' extension creating /build/buildd/cx-freeze-4.0.1/build/temp.linux-x86_64-2.6 creating /build/buildd/cx-freeze-4.0.1/build/temp.linux-x86_64-2.6/source gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -O2 -g -Wall -O2 -fPIC -I/usr/include/python2.6 -c source/util.c -o /build/buildd/cx-freeze-4.0.1/./build/temp.linux-x86_64-2.6/source/util.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-Bsymbolic-functions -g -O2 -g -Wall -O2 /build/buildd/cx-freeze-4.0.1/./build/temp.linux-x86_64-2.6/source/util.o -o /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze/util.so creating /build/buildd/cx-freeze-4.0.1/build/temp.linux-x86_64-2.6/source/bases gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -O2 -g -Wall -O2 -fPIC -I/usr/include/python2.6 -c source/bases/Console.c -o /build/buildd/cx-freeze-4.0.1/./build/temp.linux-x86_64-2.6/source/bases/Console.o creating /build/buildd/cx-freeze-4.0.1/build/lib.linux-x86_64-2.6/cx_Freeze/bases gcc -pthread /build/buildd/cx-freeze-4.0.1/./build/temp.linux-x86_64-2.6/source/bases/Console.o -L/usr/lib/python2.6/config -lpython2.6 -o /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze/bases/Console -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -lpthread -ldl -lutil -lm -s gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -O2 -g -Wall -O2 -fPIC -I/usr/include/python2.6 -c source/bases/ConsoleKeepPath.c -o /build/buildd/cx-freeze-4.0.1/./build/temp.linux-x86_64-2.6/source/bases/ConsoleKeepPath.o gcc -pthread /build/buildd/cx-freeze-4.0.1/./build/temp.linux-x86_64-2.6/source/bases/ConsoleKeepPath.o -L/usr/lib/python2.6/config -lpython2.6 -o /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze/bases/ConsoleKeepPath -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -lpthread -ldl -lutil -lm -s running build_scripts creating /build/buildd/cx-freeze-4.0.1/build/scripts-2.6 copying and adjusting cxfreeze -> /build/buildd/cx-freeze-4.0.1/./build/scripts-2.6 changing mode of /build/buildd/cx-freeze-4.0.1/./build/scripts-2.6/cxfreeze from 644 to 755 touch debian/python-module-stampdir/cx-freeze /usr/bin/fakeroot debian/rules binary-arch pyversions: missing XS-Python-Version in control file, fall back to debian/pyversions test -x debian/rules dh_testroot dh_clean -k dh_installdirs -A mkdir -p "." mkdir -p debian/python-module-stampdir set -e; for buildver in 2.6; do \ cd /build/buildd/cx-freeze-4.0.1 && cd . && python$buildver setup.py build --build-base="/build/buildd/cx-freeze-4.0.1/./build"; \ done running build running build_py running build_ext gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -O2 -g -Wall -O2 -fPIC -I/usr/include/python2.6 -c source/bases/Console.c -o /build/buildd/cx-freeze-4.0.1/./build/temp.linux-x86_64-2.6/source/bases/Console.o gcc -pthread /build/buildd/cx-freeze-4.0.1/./build/temp.linux-x86_64-2.6/source/bases/Console.o -L/usr/lib/python2.6/config -lpython2.6 -o /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze/bases/Console -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -lpthread -ldl -lutil -lm -s gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -O2 -g -Wall -O2 -fPIC -I/usr/include/python2.6 -c source/bases/ConsoleKeepPath.c -o /build/buildd/cx-freeze-4.0.1/./build/temp.linux-x86_64-2.6/source/bases/ConsoleKeepPath.o gcc -pthread /build/buildd/cx-freeze-4.0.1/./build/temp.linux-x86_64-2.6/source/bases/ConsoleKeepPath.o -L/usr/lib/python2.6/config -lpython2.6 -o /build/buildd/cx-freeze-4.0.1/./build/lib.linux-x86_64-2.6/cx_Freeze/bases/ConsoleKeepPath -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -lpthread -ldl -lutil -lm -s running build_scripts touch debian/python-module-stampdir/cx-freeze dh_installdirs -pcx-freeze set -e; for buildver in 2.6; do \ cd /build/buildd/cx-freeze-4.0.1 && cd . && python$buildver setup.py install \ --root=/build/buildd/cx-freeze-4.0.1/debian/cx-freeze/ --install-purelib=/usr/lib/python$buildver/site-packages/ \ --install-platlib=/usr/lib/python$buildver/site-packages/ --prefix=/usr --no-compile -O0; \ done running install running build running build_py running build_ext gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -O2 -g -Wall -O2 -fPIC -I/usr/include/python2.6 -c source/bases/Console.c -o build/temp.linux-x86_64-2.6/source/bases/Console.o gcc -pthread build/temp.linux-x86_64-2.6/source/bases/Console.o -L/usr/lib/python2.6/config -lpython2.6 -o build/lib.linux-x86_64-2.6/cx_Freeze/bases/Console -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -lpthread -ldl -lutil -lm -s gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -O2 -g -Wall -O2 -fPIC -I/usr/include/python2.6 -c source/bases/ConsoleKeepPath.c -o build/temp.linux-x86_64-2.6/source/bases/ConsoleKeepPath.o gcc -pthread build/temp.linux-x86_64-2.6/source/bases/ConsoleKeepPath.o -L/usr/lib/python2.6/config -lpython2.6 -o build/lib.linux-x86_64-2.6/cx_Freeze/bases/ConsoleKeepPath -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -lpthread -ldl -lutil -lm -s running build_scripts running install_lib creating /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr creating /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib creating /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6 creating /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages creating /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze copying build/lib.linux-x86_64-2.6/cx_Freeze/freezer.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze copying build/lib.linux-x86_64-2.6/cx_Freeze/windist.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze copying build/lib.linux-x86_64-2.6/cx_Freeze/main.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze copying build/lib.linux-x86_64-2.6/cx_Freeze/finder.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze copying build/lib.linux-x86_64-2.6/cx_Freeze/__init__.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze copying build/lib.linux-x86_64-2.6/cx_Freeze/hooks.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze copying build/lib.linux-x86_64-2.6/cx_Freeze/dist.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze copying build/lib.linux-x86_64-2.6/cx_Freeze/util.so -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze creating /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze/bases copying build/lib.linux-x86_64-2.6/cx_Freeze/bases/Console -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze/bases copying build/lib.linux-x86_64-2.6/cx_Freeze/bases/ConsoleKeepPath -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze/bases running install_scripts creating /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/bin copying build/scripts-2.6/cxfreeze -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/bin changing mode of /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/bin/cxfreeze to 755 running install_egg_info Writing /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze-4.0.1-py2.6.egg-info running install_packagedata creating /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze/initscripts copying initscripts/ConsoleKeepPath.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze/initscripts copying initscripts/SharedLib.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze/initscripts copying initscripts/SharedLibSource.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze/initscripts copying initscripts/ConsoleSetLibPath.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze/initscripts copying initscripts/Console.py -> /build/buildd/cx-freeze-4.0.1/debian/cx-freeze/usr/lib/python2.6/site-packages/cx_Freeze/initscripts chmod -x /build/buildd/cx-freeze-4.0.1/initscripts/*.py chrpath -d /build/buildd/cx-freeze-4.0.1/build/lib.*/cx_Freeze/bases/* dh_installdocs -pcx-freeze doc/cx_Freeze.html dh_installexamples -pcx-freeze samples dh_installman -pcx-freeze debian/cxfreeze.1 dh_installinfo -pcx-freeze dh_installmenu -pcx-freeze dh_installcron -pcx-freeze dh_installinit -pcx-freeze dh_installdebconf -pcx-freeze dh_installemacsen -pcx-freeze dh_installcatalogs -pcx-freeze dh_installpam -pcx-freeze dh_installlogrotate -pcx-freeze dh_installlogcheck -pcx-freeze dh_installchangelogs -pcx-freeze HISTORY.txt dh_installudev -pcx-freeze dh_lintian -pcx-freeze dh_install -pcx-freeze dh_link -pcx-freeze dh_installmime -pcx-freeze dh_pysupport -pcx-freeze -X initscripts dh_strip -pcx-freeze dh_strip debug symbol extraction: all non-arch-all packages for this build platform amd64: cx-freeze dh_strip debug symbol extraction: packages to act on: cx-freeze dh_strip debug symbol extraction: ignored packages: WARNING: not running pkgbinarymangler for this package, as requested dpkg-deb: building package `cx-freeze-dbgsym' in `../cx-freeze-dbgsym_4.0.1-0ubuntu3_amd64.ddeb'. dh_compress -pcx-freeze dh_fixperms -pcx-freeze dh_makeshlibs -pcx-freeze dh_installdeb -pcx-freeze dh_perl -pcx-freeze dh_shlibdeps -pcx-freeze dpkg-shlibdeps: warning: dependency on libdl.so.2 could be avoided if "debian/cx-freeze/usr/share/pyshared/cx_Freeze/bases/ConsoleKeepPath debian/cx-freeze/usr/share/pyshared/cx_Freeze/bases/Console" were not uselessly linked against it (they use none of its symbols). dpkg-shlibdeps: warning: dependency on libm.so.6 could be avoided if "debian/cx-freeze/usr/share/pyshared/cx_Freeze/bases/ConsoleKeepPath debian/cx-freeze/usr/share/pyshared/cx_Freeze/bases/Console" were not uselessly linked against it (they use none of its symbols). dpkg-shlibdeps: warning: dependency on libutil.so.1 could be avoided if "debian/cx-freeze/usr/share/pyshared/cx_Freeze/bases/ConsoleKeepPath debian/cx-freeze/usr/share/pyshared/cx_Freeze/bases/Console" were not uselessly linked against it (they use none of its symbols). dpkg-shlibdeps: warning: dependency on libpthread.so.0 could be avoided if "debian/cx-freeze/usr/lib/pyshared/python2.6/cx_Freeze/util.so debian/cx-freeze/usr/share/pyshared/cx_Freeze/bases/ConsoleKeepPath debian/cx-freeze/usr/share/pyshared/cx_Freeze/bases/Console" were not uselessly linked against it (they use none of its symbols). dh_gencontrol -pcx-freeze dpkg-gencontrol: warning: unused substitution variable ${python:Versions} # symlink identical documentation to depending packages [ -n "$CDBS_NO_DOC_SYMLINKING" ] || \ [ -h debian/cx-freeze/usr/share/doc ] || \ [ ! -d debian/cx-freeze/usr/share/doc ] || \ for dep in `perl -ne 'if (/^(Pre-)?Depends:/) {s/^\w+://; foreach (split /,/) { split; print($_[0], "\n"); } }' debian/cx-freeze/DEBIAN/control`; do \ if [ -d debian/$dep/usr/share/doc ]; then \ echo "Searching for duplicated docs in dependency $dep..."; \ rootdir=`pwd`; \ (cd debian/cx-freeze/usr/share/doc/cx-freeze; find -type f ! -name copyright | while read f; do \ thisfile="$rootdir/debian/cx-freeze/usr/share/doc/cx-freeze/$f"; \ depfile="$rootdir/debian/$dep/usr/share/doc/$dep/$f"; \ if [ -f $depfile -o -L $depfile ] && zcmp $thisfile $depfile >/dev/null; then \ echo " symlinking $f in cx-freeze to file in $dep"; \ rm $thisfile; ln -s /usr/share/doc/$dep/$f $thisfile; \ fi; \ done ); \ fi; \ done # symlink identical Gnome help files within packages if [ -z "$CDBS_NO_GNOME_HELP_SYMLINKING" ] && [ -d debian/cx-freeze/usr/share/gnome/help ]; then \ cd debian/cx-freeze && LC_ALL=C fdupes -r1nq usr/share/gnome/help | while read s; do \ set -- $(echo $s | tr ' ' '\n' | sort); \ f=$1; shift; \ for d; do \ echo "symlinking duplicate Gnome help file $d to $f"; \ rm $d; ln -s /$f $d; \ done; \ done; \ fi dh_link -p cx-freeze dh_md5sums -pcx-freeze dh_builddeb -pcx-freeze pkgstriptranslations: processing control file: ./debian/cx-freeze/DEBIAN/control, package cx-freeze, directory ./debian/cx-freeze pkgstriptranslations: cx-freeze does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgstriptranslations: static tarball already exists pkgmaintainermangler: Not overriding Maintainer for domain ubuntu.com dpkg-deb: building package `cx-freeze' in `../cx-freeze_4.0.1-0ubuntu3_amd64.deb'. dpkg-genchanges -B -mUbuntu/amd64 Build Daemon >../cx-freeze_4.0.1-0ubuntu3_amd64.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20100204-0036 Publishing debug debs. chroot-autobuild/build/buildd/cx-freeze_4.0.1-0ubuntu3_amd64.deb: new debian package, version 2.0. size 51418 bytes: control archive= 2231 bytes. 991 bytes, 19 lines control 3837 bytes, 44 lines md5sums 186 bytes, 7 lines * postinst #!/bin/sh 189 bytes, 7 lines * prerm #!/bin/sh Package: cx-freeze Version: 4.0.1-0ubuntu3 Architecture: amd64 Maintainer: Siegfried-Angel Gevatter Pujals Installed-Size: 416 Depends: libc6 (>= 2.4), libpython2.6 (>= 2.6), python (<< 2.7), python (>= 2.6), python-support (>= 0.90.0), python2.6, python-tk Section: python Priority: optional Homepage: http://cx-freeze.sourceforge.net Description: create standalone executables from Python scripts cx_Freeze is an application which allows you to freeze Python code into executable files, in a way similar to how py2exe and py2app work. . There are three different ways how you can use cx_Freeze: * Use the included cxfreeze command which works well for simple scripts. * Create a distutils setup script which can be used for more complicated configurations or to retain the configuration for future use. * Work directly with the classes and modules used internally by cx_Freeze; this should be reserved for complicated scripts, extending or embedding. chroot-autobuild/build/buildd/cx-freeze_4.0.1-0ubuntu3_amd64.deb: drwxr-xr-x root/root 0 2010-02-04 00:36 ./ drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/ drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/lib/ drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/lib/pyshared/ drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/lib/pyshared/python2.6/ drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/lib/pyshared/python2.6/cx_Freeze/ -rw-r--r-- root/root 6192 2010-02-04 00:36 ./usr/lib/pyshared/python2.6/cx_Freeze/util.so drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/bin/ -rwxr-xr-x root/root 58 2010-02-04 00:36 ./usr/bin/cxfreeze drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/ drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/doc/ drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/doc/cx-freeze/ -rw-r--r-- root/root 23709 2008-10-10 21:21 ./usr/share/doc/cx-freeze/cx_Freeze.html -rw-r--r-- root/root 3469 2010-02-04 00:36 ./usr/share/doc/cx-freeze/copyright drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/doc/cx-freeze/examples/ drwxr-xr-x root/root 0 2008-10-10 21:23 ./usr/share/doc/cx-freeze/examples/samples/ drwxr-xr-x root/root 0 2008-10-10 21:23 ./usr/share/doc/cx-freeze/examples/samples/matplotlib/ -rw-r--r-- root/root 711 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/matplotlib/setup.py -rw-r--r-- root/root 1507 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/matplotlib/test_matplotlib.py drwxr-xr-x root/root 0 2008-10-10 21:23 ./usr/share/doc/cx-freeze/examples/samples/simple/ -rw-r--r-- root/root 234 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/simple/hello.py -rw-r--r-- root/root 600 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/simple/setup.py drwxr-xr-x root/root 0 2008-10-10 21:23 ./usr/share/doc/cx-freeze/examples/samples/relimport/ -rw-r--r-- root/root 12 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/relimport/relimport.py -rw-r--r-- root/root 568 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/relimport/setup.py drwxr-xr-x root/root 0 2008-10-10 21:23 ./usr/share/doc/cx-freeze/examples/samples/relimport/pkg1/ -rw-r--r-- root/root 28 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/relimport/pkg1/sub4.py drwxr-xr-x root/root 0 2008-10-10 21:23 ./usr/share/doc/cx-freeze/examples/samples/relimport/pkg1/pkg2/ -rw-r--r-- root/root 33 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/relimport/pkg1/pkg2/sub5.py -rw-r--r-- root/root 72 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/relimport/pkg1/pkg2/sub3.py -rw-r--r-- root/root 67 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/relimport/pkg1/pkg2/__init__.py -rw-r--r-- root/root 28 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/relimport/pkg1/sub6.py -rw-r--r-- root/root 28 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/relimport/pkg1/sub2.py -rw-r--r-- root/root 47 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/relimport/pkg1/sub1.py -rw-r--r-- root/root 61 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/relimport/pkg1/__init__.py drwxr-xr-x root/root 0 2008-10-10 21:23 ./usr/share/doc/cx-freeze/examples/samples/advanced/ -rw-r--r-- root/root 1007 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/advanced/setup.py -rw-r--r-- root/root 104 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/advanced/advanced_2.py -rw-r--r-- root/root 104 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/advanced/advanced_1.py drwxr-xr-x root/root 0 2008-10-10 21:23 ./usr/share/doc/cx-freeze/examples/samples/advanced/modules/ -rw-r--r-- root/root 31 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/advanced/modules/testfreeze_2.py -rw-r--r-- root/root 31 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/advanced/modules/testfreeze_1.py drwxr-xr-x root/root 0 2008-10-10 21:23 ./usr/share/doc/cx-freeze/examples/samples/wx/ -rw-r--r-- root/root 759 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/wx/setup.py -rw-r--r-- root/root 1121 2008-10-10 21:21 ./usr/share/doc/cx-freeze/examples/samples/wx/wxapp.py -rw-r--r-- root/root 5133 2008-10-10 21:21 ./usr/share/doc/cx-freeze/changelog.gz -rw-r--r-- root/root 384 2010-02-04 00:36 ./usr/share/doc/cx-freeze/changelog.Debian.gz drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/man/ drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/man/man1/ -rw-r--r-- root/root 1377 2010-02-04 00:36 ./usr/share/man/man1/cxfreeze.1.gz drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/pyshared/ drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/pyshared/cx_Freeze/ -rw-r--r-- root/root 234 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/__init__.py -rw-r--r-- root/root 7208 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/main.py drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/pyshared/cx_Freeze/initscripts/ -rwxr-xr-x root/root 726 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/initscripts/SharedLib.py -rwxr-xr-x root/root 1372 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/initscripts/ConsoleSetLibPath.py -rwxr-xr-x root/root 969 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/initscripts/SharedLibSource.py -rwxr-xr-x root/root 604 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/initscripts/ConsoleKeepPath.py -rwxr-xr-x root/root 1166 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/initscripts/Console.py -rw-r--r-- root/root 10036 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/hooks.py -rw-r--r-- root/root 21552 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/freezer.py -rw-r--r-- root/root 16275 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/windist.py drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/pyshared/cx_Freeze/bases/ -rwxr-xr-x root/root 14632 2010-02-04 00:36 ./usr/share/pyshared/cx_Freeze/bases/Console -rwxr-xr-x root/root 14632 2010-02-04 00:36 ./usr/share/pyshared/cx_Freeze/bases/ConsoleKeepPath -rw-r--r-- root/root 10528 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/dist.py -rw-r--r-- root/root 18396 2008-10-10 21:21 ./usr/share/pyshared/cx_Freeze/finder.py -rw-r--r-- root/root 920 2010-02-04 00:36 ./usr/share/pyshared/cx_Freeze-4.0.1-py2.6.egg-info drwxr-xr-x root/root 0 2010-02-04 00:36 ./usr/share/python-support/ -rw-r--r-- root/root 781 2010-02-04 00:36 ./usr/share/python-support/cx-freeze.public cx-freeze_4.0.1-0ubuntu3_amd64.changes: Format: 1.8 Date: Thu, 04 Feb 2010 01:27:40 +0100 Source: cx-freeze Binary: cx-freeze Architecture: amd64 Version: 4.0.1-0ubuntu3 Distribution: lucid Urgency: low Maintainer: Ubuntu/amd64 Build Daemon Changed-By: Matthias Klose Description: cx-freeze - create standalone executables from Python scripts Changes: cx-freeze (4.0.1-0ubuntu3) lucid; urgency=low . * Don't link extension with LOCALMODLIBS. Checksums-Sha1: 1b28b7da7fb953fc81f0fe4539f0f16c4c120104 51418 cx-freeze_4.0.1-0ubuntu3_amd64.deb Checksums-Sha256: 5019ab72534b0a0a9d8190ede373d9b4df48cd273b0c23852f72f9a8fe73031d 51418 cx-freeze_4.0.1-0ubuntu3_amd64.deb Files: 3274019468089d4300f549c483e05f64 51418 python optional cx-freeze_4.0.1-0ubuntu3_amd64.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/cx-freeze-4.0.1 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge groff-base libglib2.0-0 mime-support m4 gettext file zlib1g-dev libhtml-parser-perl intltool libwww-perl liburi-perl libhtml-tree-perl autotools-dev po-debconf python2.6 libxml-parser-perl libcroco3 libhtml-tagset-perl python-support libxml2 chrpath libpython2.6 automake python-all-dev python-all python-dev man-db intltool-debian cdbs html2text gettext-base python2.6-dev debhelper python libmagic1 libexpat1 libsqlite3-0 bsdmainutils fdupes libpcre3 autoconf libncursesw5 (Reading database ... 15394 files and directories currently installed.) Removing zlib1g-dev ... Removing python-support ... Purging configuration files for python-support ... Removing chrpath ... Removing python-all-dev ... Removing python-all ... Removing python-dev ... Removing cdbs ... Removing python2.6-dev ... Removing debhelper ... Removing python ... Purging configuration files for python ... Removing fdupes ... Removing intltool ... Removing po-debconf ... Removing libxml-parser-perl ... Removing libpython2.6 ... Purging configuration files for libpython2.6 ... Removing automake ... Removing man-db ... Purging configuration files for man-db ... Removing intltool-debian ... Removing html2text ... Purging configuration files for html2text ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing autoconf ... Purging configuration files for autoconf ... Removing groff-base ... Purging configuration files for groff-base ... Removing m4 ... Removing gettext ... Removing file ... Purging configuration files for file ... Removing libwww-perl ... Removing libhtml-tree-perl ... Removing autotools-dev ... Removing python2.6 ... Purging configuration files for python2.6 ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing gettext-base ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libsqlite3-0 ... Purging configuration files for libsqlite3-0 ... Removing libncursesw5 ... Purging configuration files for libncursesw5 ... Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing mime-support ... Purging configuration files for mime-support ... Removing libhtml-parser-perl ... Removing liburi-perl ... Removing libhtml-tagset-perl ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20100204-0037 Build needed 00:00:15, 1220k disk space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '1482756-3043429'] Scanning for processes to kill in build /home/buildd/build-1482756-3043429/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '1482756-3043429'] Unmounting chroot for build 1482756-3043429... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '1482756-3043429'] Removing build 1482756-3043429