RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '780896-1837709', '/home/buildd/filecache-default/05ed72be0d6b3618e2e22266fc9a300b75f69100'] Synching the system clock with the buildd NTP service... 29 Nov 07:11:27 ntpdate[806]: adjust time server 10.211.37.1 offset 0.002948 sec Unpacking chroot for build 780896-1837709 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '780896-1837709'] Mounting chroot for build 780896-1837709 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '780896-1837709', 'universe'] Attempting OGRE for universe in build-780896-1837709 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '780896-1837709', 'deb http://ftpmaster.internal/ubuntu jaunty main universe'] Overriding sources.list in build-780896-1837709 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '780896-1837709'] Updating debian chroot for build 780896-1837709 Get:1 http://ftpmaster.internal jaunty Release.gpg [189B] Get:2 http://ftpmaster.internal jaunty Release [74.6kB] Ign http://ftpmaster.internal jaunty/main Packages/DiffIndex Get:3 http://ftpmaster.internal jaunty/universe Packages [2984kB] Get:4 http://ftpmaster.internal jaunty/main Packages [1185kB] Fetched 4243kB in 10s (409kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: debianutils linux-libc-dev 2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/722kB of archives. After this operation, 73.7kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! debianutils linux-libc-dev Authentication warning overridden. (Reading database ... 9539 files and directories currently installed.) Preparing to replace debianutils 2.30ubuntu1 (using .../debianutils_2.30ubuntu2_armel.deb) ... Unpacking replacement debianutils ... Setting up debianutils (2.30ubuntu2) ... (Reading database ... 9539 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.27-9.18 (using .../linux-libc-dev_2.6.28-1.1_armel.deb) ... Unpacking replacement linux-libc-dev ... Setting up linux-libc-dev (2.6.28-1.1) ... modified: mtab RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '780896-1837709', '--nolog', '--batch', '--archive=ubuntu', '--purpose=PRIMARY', '--dist=jaunty', '--comp=universe', 'd52_3.4.1-1.dsc'] Initiating build Automatic build of d52_3.4.1-1 on nageia by sbuild/armel 1.170.5 Build started at 20081129-0711 ****************************************************************************** d52_3.4.1-1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: cdbs, debhelper (>= 5) Checking for already installed source dependencies... cdbs: missing debhelper: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install cdbs debhelper Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf automake autotools-dev bsdmainutils curl fdupes file gettext gettext-base groff-base html2text ifupdown intltool intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libcurl3 libexpat1 libfont-afm-perl libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libio-compress-base-perl libio-compress-zlib-perl libmagic1 libmail-sendmail-perl libmailtools-perl libsys-hostname-long-perl liburi-perl libwww-perl libxml-parser-perl m4 man-db net-tools netbase po-debconf Suggested packages: autoconf2.13 autobook autoconf-archive gnu-standards autoconf-doc libtool wamerican wordlist whois vacation devscripts doc-base dh-make cvs gettext-doc groff iproute dhcp3-client dhcp-client ppp libio-socket-ssl-perl less www-browser libmail-box-perl The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils cdbs curl debhelper fdupes file gettext gettext-base groff-base html2text ifupdown intltool intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libcurl3 libexpat1 libfont-afm-perl libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libio-compress-base-perl libio-compress-zlib-perl libmagic1 libmail-sendmail-perl libmailtools-perl libsys-hostname-long-perl liburi-perl libwww-perl libxml-parser-perl m4 man-db net-tools netbase po-debconf 0 upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/10.1MB of archives. After this operation, 32.8MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file net-tools netbase ifupdown bsdmainutils gettext-base groff-base libcompress-raw-zlib-perl libio-compress-base-perl libio-compress-zlib-perl libcompress-zlib-perl libexpat1 libfont-afm-perl libhtml-tagset-perl liburi-perl libhtml-parser-perl libhtml-tree-perl libhtml-format-perl libmailtools-perl libwww-perl libxml-parser-perl man-db m4 autoconf autotools-dev automake html2text gettext intltool-debian po-debconf debhelper fdupes intltool cdbs libcurl3 curl libsys-hostname-long-perl libmail-sendmail-perl dpkg-preconfigure: unable to re-open stdin: Authentication warning overridden. Selecting previously deselected package libmagic1. (Reading database ... 9550 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_4.26-1_armel.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.26-1_armel.deb) ... Selecting previously deselected package net-tools. Unpacking net-tools (from .../net-tools_1.60-21ubuntu1_armel.deb) ... Selecting previously deselected package netbase. Unpacking netbase (from .../netbase_4.34ubuntu1_all.deb) ... Selecting previously deselected package ifupdown. Unpacking ifupdown (from .../ifupdown_0.6.8ubuntu12_armel.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_6.1.10ubuntu3_armel.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-4ubuntu1_armel.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.18.1.1-21_armel.deb) ... Selecting previously deselected package libcompress-raw-zlib-perl. Unpacking libcompress-raw-zlib-perl (from .../libcompress-raw-zlib-perl_2.015-1_armel.deb) ... Selecting previously deselected package libio-compress-base-perl. Unpacking libio-compress-base-perl (from .../libio-compress-base-perl_2.015-1_all.deb) ... Selecting previously deselected package libio-compress-zlib-perl. Unpacking libio-compress-zlib-perl (from .../libio-compress-zlib-perl_2.015-1_all.deb) ... Selecting previously deselected package libcompress-zlib-perl. Unpacking libcompress-zlib-perl (from .../libcompress-zlib-perl_2.015-1_all.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-4_armel.deb) ... Selecting previously deselected package libfont-afm-perl. Unpacking libfont-afm-perl (from .../libfont-afm-perl_1.20-1_all.deb) ... Selecting previously deselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously deselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.35.dfsg.1-1_all.deb) ... Selecting previously deselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.56-1ubuntu2_armel.deb) ... Selecting previously deselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_3.23-1_all.deb) ... Selecting previously deselected package libhtml-format-perl. Unpacking libhtml-format-perl (from .../libhtml-format-perl_2.04-2_all.deb) ... Selecting previously deselected package libmailtools-perl. Unpacking libmailtools-perl (from .../libmailtools-perl_2.04-1_all.deb) ... Selecting previously deselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_5.820-1_all.deb) ... Selecting previously deselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.36-1.1build2_armel.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.3-1_armel.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../archives/m4_1.4.11-1_armel.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.61-7ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20080123.2_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.10.1-3_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-5_armel.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-4ubuntu1_armel.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.15ubuntu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.0.17ubuntu1_all.deb) ... Selecting previously deselected package fdupes. Unpacking fdupes (from .../fdupes_1.50-PR2-1_armel.deb) ... Selecting previously deselected package intltool. Unpacking intltool (from .../intltool_0.40.5-1_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.52ubuntu9_all.deb) ... Selecting previously deselected package libcurl3. Unpacking libcurl3 (from .../libcurl3_7.18.2-7ubuntu2_armel.deb) ... Selecting previously deselected package curl. Unpacking curl (from .../curl_7.18.2-7ubuntu2_armel.deb) ... Selecting previously deselected package libsys-hostname-long-perl. Unpacking libsys-hostname-long-perl (from .../libsys-hostname-long-perl_1.4-2_all.deb) ... Selecting previously deselected package libmail-sendmail-perl. Unpacking libmail-sendmail-perl (from .../libmail-sendmail-perl_0.79.16-1_all.deb) ... Setting up libmagic1 (4.26-1) ... Setting up file (4.26-1) ... Setting up net-tools (1.60-21ubuntu1) ... Setting up netbase (4.34ubuntu1) ... Setting up ifupdown (0.6.8ubuntu12) ... ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces update-rc.d: warning: /etc/init.d/loopback missing LSB information update-rc.d: see Setting up bsdmainutils (6.1.10ubuntu3) ... Setting up gettext-base (0.17-4ubuntu1) ... Setting up groff-base (1.18.1.1-21) ... Setting up libcompress-raw-zlib-perl (2.015-1) ... Setting up libio-compress-base-perl (2.015-1) ... Setting up libio-compress-zlib-perl (2.015-1) ... Setting up libcompress-zlib-perl (2.015-1) ... Setting up libexpat1 (2.0.1-4) ... Setting up libfont-afm-perl (1.20-1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up liburi-perl (1.35.dfsg.1-1) ... Setting up libhtml-parser-perl (3.56-1ubuntu2) ... Setting up libhtml-tree-perl (3.23-1) ... Setting up libhtml-format-perl (2.04-2) ... Setting up libmailtools-perl (2.04-1) ... Setting up libwww-perl (5.820-1) ... Setting up libxml-parser-perl (2.36-1.1build2) ... Setting up man-db (2.5.3-1) ... Building database of manual pages ... ... skipping, since this is a buildd Setting up m4 (1.4.11-1) ... Setting up autoconf (2.61-7ubuntu1) ... Setting up autotools-dev (20080123.2) ... Setting up automake (1:1.10.1-3) ... Setting up html2text (1.3.2a-5) ... Setting up gettext (0.17-4ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.15ubuntu1) ... Setting up debhelper (7.0.17ubuntu1) ... Setting up fdupes (1.50-PR2-1) ... Setting up intltool (0.40.5-1) ... Setting up cdbs (0.4.52ubuntu9) ... Setting up libcurl3 (7.18.2-7ubuntu2) ... Setting up curl (7.18.2-7ubuntu2) ... Setting up libsys-hostname-long-perl (1.4-2) ... Setting up libmail-sendmail-perl (0.79.16-1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place modified: mtab Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.8+20081027-0ubuntu10 make_3.81-5 dpkg-dev_1.14.22ubuntu1 g++-4.3_4.3.2-2ubuntu4 gcc-4.3_4.3.2-2ubuntu4 binutils_2.19-0ubuntu2 libstdc++6_4.3.2-2ubuntu4 libstdc++6-4.3-dev_4.3.2-2ubuntu4 ------------------------------------------------------------------------------ sh: gcc: command not found dpkg-source: warning: Couldn't determine gcc system type, falling back to default (native compilation) gpg: Signature made Sun Feb 17 15:04:59 2008 GMT using DSA key ID 78D621B4 gpg: Can't check signature: public key not found dpkg-source: extracting d52 in d52-3.4.1 dpkg-source: info: unpacking d52_3.4.1.orig.tar.gz dpkg-source: info: applying d52_3.4.1-1.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package d52 dpkg-buildpackage: source version 3.4.1-1 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean test -x debian/rules dh_testroot dh_clean /usr/bin/make -C . CFLAGS="-g -O2 -g -Wall -O2" CXXFLAGS="-g -O2 -g -Wall -O2" CPPFLAGS="" LDFLAGS="-Wl,-Bsymbolic-functions" -k clean make[1]: Entering directory `/build/buildd/d52-3.4.1' rm -f ./obj/*.o rm -f d52 d48 dz80 make[1]: Leaving directory `/build/buildd/d52-3.4.1' rm -f debian/stamp-makefile-build /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/build/buildd/d52-3.4.1' make[1]: Nothing to be done for `reverse-config'. make[1]: Leaving directory `/build/buildd/d52-3.4.1' if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/10_honor_nostrip.patch Patch debian/patches/10_honor_nostrip.patch is not applied. if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "reverse-patches" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi for dir in debian/patches ; do \ rm -f $dir/*.log ; \ done debian/rules build test -x debian/rules mkdir -p "." /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/build/buildd/d52-3.4.1' make[1]: Nothing to be done for `reverse-config'. make[1]: Leaving directory `/build/buildd/d52-3.4.1' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/10_honor_nostrip.patch Trying patch debian/patches/10_honor_nostrip.patch at level 1 ... 0 ... success. if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi make[1]: Entering directory `/build/buildd/d52-3.4.1' make[1]: Nothing to be done for `update-config'. make[1]: Leaving directory `/build/buildd/d52-3.4.1' /usr/bin/make -C . CFLAGS="-g -O2 -g -Wall -O2" CXXFLAGS="-g -O2 -g -Wall -O2" CPPFLAGS="" LDFLAGS="-Wl,-Bsymbolic-functions" make[1]: Entering directory `/build/buildd/d52-3.4.1' gcc -g -O2 -g -Wall -O2 -c d52.c -o obj/d52.o gcc -g -O2 -g -Wall -O2 -c common.c -o obj/common.o common.c: In function 'readfile': common.c:361: warning: ignoring return value of 'fgets', declared with attribute warn_unused_result gcc -g -O2 -g -Wall -O2 -c d52pass1.c -o obj/d52pass1.o gcc -g -O2 -g -Wall -O2 -c d52pass2.c -o obj/d52pass2.o d52pass2.c: In function 'dodir': d52pass2.c:935: warning: format not a string literal and no format arguments gcc -g -O2 -g -Wall -O2 -c d52table.c -o obj/d52table.o gcc -g -O2 -g -Wall -O2 -c analyze52.c -o obj/analyze52.o gcc -g -O2 -g -Wall -O2 -c analyze.c -o obj/analyze.o gcc -g -O2 -g -Wall -O2 ./obj/d52.o ./obj/common.o ./obj/d52pass1.o ./obj/d52pass2.o ./obj/d52table.o ./obj/analyze52.o ./obj/analyze.o -o d52 gcc -g -O2 -g -Wall -O2 -c d48.c -o obj/d48.o gcc -g -O2 -g -Wall -O2 -c d48pass.c -o obj/d48pass.o gcc -g -O2 -g -Wall -O2 -c d48table.c -o obj/d48table.o gcc -g -O2 -g -Wall -O2 ./obj/d48.o ./obj/common.o ./obj/d48pass.o ./obj/d48table.o -o d48 gcc -g -O2 -g -Wall -O2 -c dz80.c -o obj/dz80.o gcc -g -O2 -g -Wall -O2 -c dz80pass1.c -o obj/dz80pass1.o gcc -g -O2 -g -Wall -O2 -c dz80pass2.c -o obj/dz80pass2.o gcc -g -O2 -g -Wall -O2 -c dz80table.c -o obj/dz80table.o gcc -g -O2 -g -Wall -O2 -c d80table.c -o obj/d80table.o gcc -g -O2 -g -Wall -O2 -c analyzez80.c -o obj/analyzez80.o gcc -g -O2 -g -Wall -O2 ./obj/dz80.o ./obj/common.o ./obj/dz80pass1.o ./obj/dz80pass2.o ./obj/dz80table.o ./obj/d80table.o ./obj/analyzez80.o ./obj/analyze.o -o dz80 make[1]: Leaving directory `/build/buildd/d52-3.4.1' touch debian/stamp-makefile-build DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/fakeroot debian/rules binary-arch test -x debian/rules dh_testroot dh_clean -k dh_installdirs -A mkdir -p "." DEB_MAKE_CHECK_TARGET unset, not running checks DEB_MAKE_INSTALL_TARGET unset, skipping default makefile.mk common-install target dh_installdirs -pd52 install d52 debian/d52/usr/bin install d48 debian/d52/usr/bin install dz80 debian/d52/usr/bin dh_installdocs -pd52 ./README dh_installexamples -pd52 dh_installman -pd52 dh_installinfo -pd52 dh_installmenu -pd52 dh_installcron -pd52 dh_installinit -pd52 dh_installdebconf -pd52 dh_installemacsen -pd52 dh_installcatalogs -pd52 dh_installpam -pd52 dh_installlogrotate -pd52 dh_installlogcheck -pd52 dh_installchangelogs -pd52 dh_installudev -pd52 dh_lintian -pd52 dh_install -pd52 dh_link -pd52 dh_installmime -pd52 dh_strip -pd52 dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: d52 dh_strip debug symbol extraction: packages to act on: d52 dh_strip debug symbol extraction: ignored packages: pkgstriptranslations: processing control file: ./debian/d52-dbgsym/DEBIAN/control, package d52-dbgsym, directory ./debian/d52-dbgsym pkgstriptranslations: d52-dbgsym does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu MOTU Developers " warning, `/build/buildd/d52-3.4.1/debian/d52-dbgsym/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `d52-dbgsym' in `../d52-dbgsym_3.4.1-1_armel.ddeb'. dh_compress -pd52 dh_fixperms -pd52 dh_makeshlibs -pd52 dh_installdeb -pd52 dh_perl -pd52 dh_shlibdeps -pd52 dh_gencontrol -pd52 dpkg-gencontrol: warning: unknown substitution variable ${misc:Depends} # symlink identical documentation to depending packages [ -n "$CDBS_NO_DOC_SYMLINKING" ] || \ [ -h debian/d52/usr/share/doc ] || \ [ ! -d debian/d52/usr/share/doc ] || \ for dep in `perl -ne 'if (/^(Pre-)?Depends:/) {s/^\w+://; foreach (split /,/) { split; print($_[0], "\n"); } }' debian/d52/DEBIAN/control`; do \ if [ -d debian/$dep/usr/share/doc ]; then \ echo "Searching for duplicated docs in dependency $dep..."; \ rootdir=`pwd`; \ (cd debian/d52/usr/share/doc/d52; find -type f ! -name copyright | while read f; do \ thisfile="$rootdir/debian/d52/usr/share/doc/d52/$f"; \ depfile="$rootdir/debian/$dep/usr/share/doc/$dep/$f"; \ if [ -f $depfile -o -L $depfile ] && zcmp $thisfile $depfile >/dev/null; then \ echo " symlinking $f in d52 to file in $dep"; \ rm $thisfile; ln -s /usr/share/doc/$dep/$f $thisfile; \ fi; \ done ); \ fi; \ done # symlink identical Gnome help files within packages if [ -z "$CDBS_NO_GNOME_HELP_SYMLINKING" ] && [ -d debian/d52/usr/share/gnome/help ]; then \ cd debian/d52 && LC_ALL=C fdupes -r1nq usr/share/gnome/help | while read s; do \ set -- $(echo $s | tr ' ' '\n' | sort); \ f=$1; shift; \ for d; do \ echo "symlinking duplicate Gnome help file $d to $f"; \ rm $d; ln -s /$f $d; \ done; \ done; \ fi dh_link -p d52 dh_md5sums -pd52 dh_builddeb -pd52 pkgstriptranslations: processing control file: ./debian/d52/DEBIAN/control, package d52, directory ./debian/d52 pkgstriptranslations: d52 does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu MOTU Developers " warning, `debian/d52/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `d52' in `../d52_3.4.1-1_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../d52_3.4.1-1_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20081129-0713 Publishing debug debs. chroot-autobuild/build/buildd/d52_3.4.1-1_armel.deb: new debian package, version 2.0. size 82842 bytes: control archive= 713 bytes. 584 bytes, 17 lines control 335 bytes, 6 lines md5sums Package: d52 Version: 3.4.1-1 Architecture: armel Maintainer: Ubuntu MOTU Developers Original-Maintainer: Uwe Hermann Installed-Size: 232 Depends: libc6 (>= 2.4) Section: devel Priority: extra Homepage: http://home.pacbell.net/theposts Description: Disassembler for 8052, 8048/8041, and Z80/8080/8085 code Disassembler for microcontroller code which supports various targets. . This package contains: - d52: a disassembler for 8052 code, - d48: a disassembler for 8048/8041 code, - dz80: a disassembler for Z80/8080/8085 code. chroot-autobuild/build/buildd/d52_3.4.1-1_armel.deb: drwxr-xr-x root/root 0 2008-11-29 07:13 ./ drwxr-xr-x root/root 0 2008-11-29 07:13 ./usr/ drwxr-xr-x root/root 0 2008-11-29 07:13 ./usr/share/ drwxr-xr-x root/root 0 2008-11-29 07:13 ./usr/share/doc/ drwxr-xr-x root/root 0 2008-11-29 07:13 ./usr/share/doc/d52/ -rw-r--r-- root/root 2873 2007-09-01 19:06 ./usr/share/doc/d52/README.gz -rw-r--r-- root/root 796 2008-11-29 07:12 ./usr/share/doc/d52/copyright -rw-r--r-- root/root 150 2008-11-29 07:12 ./usr/share/doc/d52/changelog.Debian.gz drwxr-xr-x root/root 0 2008-11-29 07:13 ./usr/bin/ -rwxr-xr-x root/root 68988 2008-11-29 07:13 ./usr/bin/dz80 -rwxr-xr-x root/root 69992 2008-11-29 07:13 ./usr/bin/d52 -rwxr-xr-x root/root 43840 2008-11-29 07:13 ./usr/bin/d48 d52_3.4.1-1_armel.changes: Format: 1.8 Date: Sun, 17 Feb 2008 15:49:36 +0100 Source: d52 Binary: d52 Architecture: armel Version: 3.4.1-1 Distribution: jaunty Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: Uwe Hermann Description: d52 - Disassembler for 8052, 8048/8041, and Z80/8080/8085 code Closes: 466166 Changes: d52 (3.4.1-1) unstable; urgency=low . * Initial release (Closes: #466166). Checksums-Sha1: e55af19605707b4d8f4cc6bcecfdbf395d7475aa 82842 d52_3.4.1-1_armel.deb Checksums-Sha256: 90edece2476b96d21a215debbf9b8066876f15d6907a4767ef5febf9466f86d9 82842 d52_3.4.1-1_armel.deb Files: b1cc343603117267fe6bbccbff8fb700 82842 devel extra d52_3.4.1-1_armel.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/d52-3.4.1 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --root=/home/buildd/build-780896-1837709/chroot-autobuild --purge groff-base m4 libfont-afm-perl libio-compress-base-perl gettext file libhtml-parser-perl intltool libwww-perl liburi-perl curl libhtml-tree-perl ifupdown autotools-dev po-debconf net-tools libmailtools-perl libxml-parser-perl libhtml-tagset-perl libcompress-raw-zlib-perl netbase libsys-hostname-long-perl libmail-sendmail-perl automake man-db intltool-debian libcompress-zlib-perl libcurl3 cdbs html2text gettext-base debhelper libmagic1 libexpat1 libio-compress-zlib-perl bsdmainutils fdupes autoconf libhtml-format-perl (Reading database ... 11528 files and directories currently installed.) Removing curl ... Removing ifupdown ... Purging configuration files for ifupdown ... Removing net-tools ... Removing libmailtools-perl ... Removing libmail-sendmail-perl ... Removing libcompress-zlib-perl ... Removing libcurl3 ... Purging configuration files for libcurl3 ... Removing cdbs ... Removing debhelper ... Removing libio-compress-zlib-perl ... Removing fdupes ... Removing libhtml-format-perl ... Removing libfont-afm-perl ... Removing libio-compress-base-perl ... Removing intltool ... Removing po-debconf ... Removing libxml-parser-perl ... Removing libcompress-raw-zlib-perl ... Removing libsys-hostname-long-perl ... Removing automake ... Removing man-db ... Purging configuration files for man-db ... Removing intltool-debian ... Removing html2text ... Purging configuration files for html2text ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing autoconf ... Purging configuration files for autoconf ... Removing groff-base ... Purging configuration files for groff-base ... Removing m4 ... Removing gettext ... Removing file ... Purging configuration files for file ... Removing libwww-perl ... Removing libhtml-tree-perl ... Removing autotools-dev ... Removing netbase ... Purging configuration files for netbase ... Removing gettext-base ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libhtml-parser-perl ... Removing liburi-perl ... Removing libhtml-tagset-perl ... Processing triggers for libc6 ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20081129-0714 Build needed 00:01:32, 1932k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '780896-1837709'] Scanning for processes to kill in build 780896-1837709... Scanning for processes to kill in build /home/buildd/build-780896-1837709/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '780896-1837709'] Unmounting chroot for build 780896-1837709... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '780896-1837709'] Removing build 780896-1837709