Ubuntu
dbus package

dbus 1.10.18-1ubuntu2 source package in Ubuntu

Changelog

dbus (1.10.18-1ubuntu2) artful; urgency=medium

  * Restore accidentally dropped debian/rules modification
    to not start D-Bus on package installation

dbus (1.10.18-1ubuntu1) artful; urgency=medium

  * Sync with Debian. Remaining changes:
    - Clean up /etc/init/dbus.conf on upgrades. This needs to be kept until
      after 18.04 LTS.
    - Add dont-stop-dbus.patch: Don't stop D-Bus in the service unit
      (see patch header and upstream bug for details). Fixes various
      causes of shutdown hangs, particularly with remote file systems.
      (LP: #1438612) (LP: #1540282)
    - debian/dbus.postinst, debian/rules: Don't start D-Bus on package
      installation, as that doesn't work any more with dont-stop-dbus.patch.
      Instead, start dbus.socket in postinst, which will then start D-Bus
      on demand after package installation.
    - Add aa-get-connection-apparmor-security-context.patch: This is not
      intended for upstream inclusion. It implements a bus method
      (GetConnectionAppArmorSecurityContext) to get a connection's AppArmor
      security context but upstream D-Bus has recently added a generic way of
      getting a connection's security credentials (GetConnectionCredentials).
      Ubuntu should carry this patch until packages in the archive are moved
      over to the new, generic method of getting a connection's credentials.
  * Dropped changes:
    - make-uid-0-immune-to-timeout.patch: Applied in new release
    - debian/dbus.user-session.upstart

dbus (1.10.18-1) unstable; urgency=medium

  * New upstream stable release
    - On SELinux systems, make sure the thread that reads AVC
      notifications retains the ability to write the audit log
      (Closes: #857660)
    - Fix a read overflow and some memory leaks in a unit test
      (no effect on production systems)

dbus (1.10.16-1) unstable; urgency=medium

  * New upstream release
    - Contains a security fix for a potential symlink attack in the
      nonce-tcp transport. That transport is not normally used (or
      recommended) on Unix.

dbus (1.10.14-1) unstable; urgency=medium

  * New upstream release

dbus (1.10.12-1) unstable; urgency=medium

  * New upstream release
  * d/p/backports/Replace-DBUS_USE_TEST_BINARY-with-DBUS_TEST_DBUS_LAUNCH.patch:
    backport a change from 1.11.2 to make the debug build of libdbus
    reproducible under varying build paths
  * Move Debian-specific patches to debian/patches/debian (corresponding
    to "Gbp-pq: Topic debian" on the patch queue branch)
  * debian/*.lintian-overrides:
    - override systemd-service-file-missing-install-key for dbus.service,
      which is intentionally statically enabled
    - override embedded-javascript-library for Doxygen's jquery.js,
      which is not actually libjs-jquery (see #736360)
  * Move to debhelper compat level 10
    - drop options and overrides that are now the default

dbus (1.10.10-1) unstable; urgency=medium

  * New upstream stable release 1.10.10
  * Provide new virtual packages for other packages to depend on:
    - dbus-session-bus: any implementation of the D-Bus well-known session bus
      (provided by: dbus-user-session, dbus-x11)
    - default-dbus-session-bus: the recommended implementation of
      dbus-session-bus (currently provided by: dbus-user-session)
  * Add arm64, mips64el, ppc64el to the list of architectures that
    have valgrind
  * debian/gbp.conf: use DEP-14 branch names
  * Standards-Version: 3.9.8 (no changes needed)
  * debian/rules: fail the build if "make install" installs anything we
    don't package or delete. Only do this for final releases (suite
    in debian/changelog is not UNRELEASED) to facilitate future
    autobuilding of new upstream releases.
  * debian/rules: do not require symbols file to be complete if the
    suite in debian/changelog is UNRELEASED, again to facilitate
    autobuilding new upstream releases.
  * debian/source/options: don't fail dpkg-source on changes to
    build-aux/{compile,depcomp,missing}. We regenerate that directory anyway,
    and during a snapshot build they might become symlinks.
  * debian/rules: do the build in debian/build-* so it's easier to .gitignore
  * debian/.gitignore: update
  * Use the correct systemctl for Debian even if not installed on the build
    system. (Regression in 1.10.2)

 -- Jeremy Bicha <email address hidden>  Sun, 18 Jun 2017 21:44:39 -0400

Upload details

Uploaded by:
Jeremy Bicha on 2017-06-19
Uploaded to:
Artful
Original maintainer:
Ubuntu Developers
Architectures:
any all
Section:
devel
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
dbus_1.10.18.orig.tar.gz 1.9 MiB 6049ddd5f3f3e2618f615f1faeda0a115104423a7996b7aa73e2f36e38cc514a
dbus_1.10.18-1ubuntu2.debian.tar.xz 57.7 KiB c86d927d09c8cbfac254cc3b17685d958e12ebc495b44b26edb748f540cea8a5
dbus_1.10.18-1ubuntu2.dsc 3.1 KiB 090af09d4ac193e68a29b7f590aad7d9c3ebb6ff70ee8fd2f1f958f237ae4961

View changes file

Binary packages built by this source

dbus: simple interprocess messaging system (daemon and utilities)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package contains the D-Bus daemon and related utilities.
 .
 The client-side library can be found in the libdbus-1-3 package, as it is no
 longer contained in this package.

dbus-1-dbg: No summary available for dbus-1-dbg in ubuntu artful.

No description available for dbus-1-dbg in ubuntu artful.

dbus-1-doc: simple interprocess messaging system (documentation)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the API documentation for D-Bus, as well as
 the protocol specification.
 .
 See the dbus description for more information about D-Bus in general.

dbus-tests: simple interprocess messaging system (test infrastructure)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides automated and manual tests for D-Bus, and the
 dbus-test-tool utility. It also provides copies of the D-Bus libraries and
 executables compiled with extra debug information and logging.
 .
 See the dbus package description for more information about D-Bus in general.

dbus-udeb: simple interprocess messaging system (minimal runtime)

 D-Bus is a message bus, used for sending messages between applications.
 .
 This package is a minimal version of the dbus and dbus-x11 packages,
 for use in the Debian installer. It can run a session bus, but is not
 suitable for use as a system bus.

dbus-user-session: simple interprocess messaging system (systemd --user integration)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 On systemd systems, this package opts in to the session model in which
 a user's session starts the first time they log in, and does not end
 until all their login sessions have ended. This model merges all
 parallel non-graphical login sessions (text mode, ssh, cron, etc.), and up
 to one graphical session, into a single "user-session" or "super-session"
 within which all background D-Bus services are shared.
 .
 Multiple graphical sessions per user are not currently supported in this
 mode; as a result, it is particularly suitable for gdm, which responds to
 requests to open a parallel graphical session by switching to the existing
 graphical session and unlocking it.
 .
 To retain dbus' traditional session semantics, in which login sessions
 are artificially isolated from each other, remove this package and install
 dbus-x11 instead.
 .
 See the dbus package description for more information about D-Bus in general.

dbus-x11: simple interprocess messaging system (X11 deps)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the dbus-launch utility which is necessary for
 packages using a D-Bus session bus.
 .
 See the dbus description for more information about D-Bus in general.

libdbus-1-3: simple interprocess messaging system (library)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.

libdbus-1-3-udeb: simple interprocess messaging system (minimal library)

 D-Bus is a message bus, used for sending messages between applications.
 .
 This package is a minimal version of the libdbus-1-3 package,
 for use in the Debian installer.

libdbus-1-dev: simple interprocess messaging system (development headers)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 See the dbus description for more information about D-Bus in general.