Here are some details I forgot to mention: Steps to reproduce: 1. Login user A 2. Login user B 3. Switch to user A 4. After staying for a few seconds on A's desktop, the login screen unexpectedly re-appears. Further attempts to login as A cause the same problem. (This only happens occationally, usually after computer has been running for a long time with B logged in; B's continually running Firefox session leaks a lot of memory. Also, login screen may repaint / flash black several times) 5. The dialog: "Cannot start new display The allowed limit of flexible X servers reached" Has been observed on B after an occurance of the bug Only rebooting / restarting X fixes the problem Expected: I should be able to login on A after logging onto B all the time Possible serious consequences: Data loss for A due to failure to be able to return to session I must stress that it appears the bug only occurs for certain users. I understand this doesn't make it very easy to track down. By the way, I am experiencing bug #195311 as well, usually around the same time I experience this bug. The two problems may be related. ====================================== System details are as follows: (let me know if you need anything else) Ubuntu 7.10 Gusty $uname-a Linux Gandalf 2.6.22-14-generic #1 SMP Tue Feb 12 07:42:25 UTC 2008 i686 GNU/Linux $lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:07.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) 01:07.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04) 01:07.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) 07:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1) $lsmod Module Size Used by binfmt_misc 12936 1 rfcomm 42136 2 l2cap 26240 11 rfcomm bluetooth 57060 4 rfcomm,l2cap nfsd 220912 13 exportfs 7040 1 nfsd lockd 67592 2 nfsd sunrpc 172412 8 nfsd,lockd ppdev 10244 0 cpufreq_stats 7232 0 cpufreq_powersave 2688 0 cpufreq_conservative 8072 0 cpufreq_userspace 5280 0 cpufreq_ondemand 9612 0 freq_table 5792 2 cpufreq_stats,cpufreq_ondemand video 18060 0 ac 6148 0 dock 10656 0 container 5504 0 sbs 19592 0 button 8976 0 battery 11012 0 sbp2 24072 0 lp 12580 0 snd_hda_intel 263840 0 snd_seq_dummy 4740 0 snd_seq_oss 33152 0 snd_emu10k1_synth 8192 0 snd_emux_synth 35456 1 snd_emu10k1_synth snd_seq_virmidi 8064 1 snd_emux_synth snd_seq_midi_emul 7680 1 snd_emux_synth snd_seq_midi 9600 0 agpgart 35016 0 snd_emu10k1 137248 2 snd_emu10k1_synth snd_ac97_codec 100644 1 snd_emu10k1 snd_rawmidi 25728 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1 snd_seq_midi_event 8448 3 snd_seq_oss,snd_seq_virmidi,snd_seq_midi snd_seq 53232 9 snd_seq_dummy,snd_seq_oss,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi,snd_seq_midi_event ac97_bus 3200 1 snd_ac97_codec snd_pcm_oss 44672 0 snd_mixer_oss 17664 1 snd_pcm_oss serio_raw 8068 0 pcspkr 4224 0 snd_pcm 80388 4 snd_hda_intel,snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_seq_device 9228 8 snd_seq_dummy,snd_seq_oss,snd_emu10k1_synth,snd_emux_synth,snd_seq_midi,snd_emu10k1,snd_rawmidi,snd_seq snd_timer 24324 3 snd_emu10k1,snd_seq,snd_pcm snd_util_mem 5760 2 snd_emux_synth,snd_emu10k1 snd_hwdep 10244 2 snd_emux_synth,snd_emu10k1 parport_pc 37412 1 parport 37448 3 ppdev,lp,parport_pc k8temp 6656 0 snd 54660 16 snd_hda_intel,snd_seq_oss,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_rawmidi,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep usblp 15104 0 emu10k1_gp 4736 0 gameport 16776 2 emu10k1_gp psmouse 39952 0 shpchp 34580 0 pci_hotplug 32704 1 shpchp snd_page_alloc 11400 3 snd_hda_intel,snd_emu10k1,snd_pcm soundcore 8800 1 snd ide_cd 32672 0 cdrom 37536 1 ide_cd i2c_nforce2 7040 0 i2c_core 26112 1 i2c_nforce2 ipv6 273892 20 evdev 11136 3 ext3 133896 1 jbd 60456 1 ext3 mbcache 9732 1 ext3 sg 36764 0 sd_mod 30336 3 usb_storage 73024 0 libusual 18448 1 usb_storage sata_nv 20612 2 ohci1394 36528 0 ieee1394 96312 2 sbp2,ohci1394 forcedeth 51592 0 amd74xx 15260 0 [permanent] ide_core 116804 3 ide_cd,usb_storage,amd74xx ata_generic 8452 0 libata 125168 2 sata_nv,ata_generic scsi_mod 147084 5 sbp2,sg,sd_mod,usb_storage,libata ehci_hcd 36492 0 ohci_hcd 22916 0 usbcore 138632 6 usblp,usb_storage,libusual,ehci_hcd,ohci_hcd thermal 14344 0 processor 32072 1 thermal fan 5764 0 fuse 47124 1 apparmor 40728 0 commoncap 8320 1 apparmor $dmesg [ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5c20 [ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261872 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261872 [ 0.000000] On node 0 totalpages: 261872 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32243 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7890 checksum 0 [ 0.000000] ACPI: RSDP 000F7890, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FEF3180, 9B41 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEF0000, 0040 [ 0.000000] ACPI: MCFG 3FEFCE00, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 3FEFCD40, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000) [ 0.000000] Built 1 zonelists. Total pages: 259827 [ 0.000000] Kernel command line: root=UUID=8ab30828-09cc-449c-ac91-2c409642ff02 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2210.270 MHz processor. [ 18.403735] spurious 8259A interrupt: IRQ7. [ 18.404837] Console: colour VGA+ 80x25 [ 18.405131] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 18.405482] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 18.424465] Memory: 1026872k/1047488k available (2015k kernel code, 19916k reserved, 915k data, 364k init, 129984k highmem) [ 18.424474] virtual kernel memory layout: [ 18.424475] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 18.424476] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 18.424477] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 18.424479] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 18.424480] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 18.424481] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB) [ 18.424482] .text : 0xc0100000 - 0xc02f7e86 (2015 kB) [ 18.424484] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 18.424515] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 18.504484] Calibrating delay using timer specific routine.. 4424.06 BogoMIPS (lpj=8848137) [ 18.504506] Security Framework v1.0.0 initialized [ 18.504511] SELinux: Disabled at boot. [ 18.504522] Mount-cache hash table entries: 512 [ 18.504622] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d [ 18.504629] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.504631] CPU: L2 Cache: 512K (64 bytes/line) [ 18.504634] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d [ 18.504642] Compat vDSO mapped to ffffe000. [ 18.504652] Checking 'hlt' instruction... OK. [ 18.520591] SMP alternatives: switching to UP code [ 18.520754] Freeing SMP alternatives: 11k freed [ 18.520981] Early unpacking initramfs... done [ 18.780643] ACPI: Core revision 20070126 [ 18.780728] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.785484] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02 [ 18.785498] Total of 1 processors activated (4424.06 BogoMIPS). [ 18.785729] ENABLING IO-APIC IRQs [ 18.785939] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 18.932268] Brought up 1 CPUs [ 18.932370] Booting paravirtualized kernel on bare hardware [ 18.932414] Time: 2:05:29 Date: 05/12/108 [ 18.932431] NET: Registered protocol family 16 [ 18.932493] EISA bus registered [ 18.932502] ACPI: bus type pci registered [ 18.936930] PCI: PCI BIOS revision 3.00 entry at 0xf1e40, last bus=7 [ 18.936932] PCI: Using configuration type 1 [ 18.936933] Setting up standard PCI resources [ 18.941813] ACPI: EC: Look up EC in DSDT [ 18.950974] ACPI: Interpreter enabled [ 18.950977] ACPI: (supports S0 S1 S3 S4 S5) [ 18.950988] ACPI: Using IOAPIC for interrupt routing [ 18.961785] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.961793] PCI: Probing PCI hardware (bus 00) [ 18.962344] PCI: Transparent bridge - 0000:00:06.0 [ 18.962669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.963003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 19.059467] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.059689] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) [ 19.059911] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 19.060129] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.060352] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.060572] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) [ 19.060789] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.061008] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.061226] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.061445] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 19.061664] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 19.061883] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 19.062102] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.062321] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 19.062540] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 19.062759] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.062978] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 19.063203] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 19.063426] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) [ 19.063676] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 19.063915] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 19.064152] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 19.064392] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 19.064630] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 19.064867] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 19.065105] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 19.065343] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 19.065581] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 19.065822] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 19.066060] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 19.066299] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 19.066538] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 19.066777] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 19.067016] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 19.067255] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 19.067494] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 19.067733] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 19.067971] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 19.068074] Linux Plug and Play Support v0.97 (c) Adam Belay [ 19.068086] pnp: PnP ACPI init [ 19.068092] ACPI: bus type pnp registered [ 19.073709] pnp: PnP ACPI: found 13 devices [ 19.073711] ACPI: ACPI bus type pnp unregistered [ 19.073714] PnPBIOS: Disabled by ACPI PNP [ 19.073751] PCI: Using ACPI for IRQ routing [ 19.073755] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 19.172200] NET: Registered protocol family 8 [ 19.172202] NET: Registered protocol family 20 [ 19.172243] pnp: 00:01: ioport range 0x1000-0x107f has been reserved [ 19.172245] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved [ 19.172248] pnp: 00:01: ioport range 0x1400-0x147f has been reserved [ 19.172250] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved [ 19.172252] pnp: 00:01: ioport range 0x1800-0x187f has been reserved [ 19.172255] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved [ 19.172262] pnp: 00:0b: iomem range 0x0-0x0 could not be reserved [ 19.172266] pnp: 00:0c: iomem range 0xd0000-0xd3fff has been reserved [ 19.172268] pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 19.172271] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 19.172273] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 19.176091] Time: tsc clocksource has been installed. [ 19.202456] PCI: Bridge: 0000:00:06.0 [ 19.202458] IO window: a000-afff [ 19.202461] MEM window: fde00000-fdefffff [ 19.202463] PREFETCH window: disabled. [ 19.202465] PCI: Bridge: 0000:00:0a.0 [ 19.202466] IO window: disabled. [ 19.202468] MEM window: disabled. [ 19.202470] PREFETCH window: disabled. [ 19.202472] PCI: Bridge: 0000:00:0b.0 [ 19.202473] IO window: disabled. [ 19.202475] MEM window: disabled. [ 19.202476] PREFETCH window: disabled. [ 19.202479] PCI: Bridge: 0000:00:0c.0 [ 19.202480] IO window: disabled. [ 19.202482] MEM window: disabled. [ 19.202483] PREFETCH window: disabled. [ 19.202485] PCI: Bridge: 0000:00:0d.0 [ 19.202487] IO window: disabled. [ 19.202488] MEM window: disabled. [ 19.202490] PREFETCH window: disabled. [ 19.202492] PCI: Bridge: 0000:00:0e.0 [ 19.202493] IO window: disabled. [ 19.202495] MEM window: disabled. [ 19.202497] PREFETCH window: disabled. [ 19.202499] PCI: Bridge: 0000:00:0f.0 [ 19.202501] IO window: 9000-9fff [ 19.202503] MEM window: fa000000-fcffffff [ 19.202505] PREFETCH window: e0000000-efffffff [ 19.202513] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 19.202519] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 19.202525] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 19.202530] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 19.202535] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 19.202540] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 19.202546] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 19.202555] NET: Registered protocol family 2 [ 19.240081] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 19.240171] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 19.241287] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 19.241677] TCP: Hash tables configured (established 131072 bind 65536) [ 19.241679] TCP reno registered [ 19.252147] checking if image is initramfs... it is [ 19.703783] Switched to high resolution mode on CPU 0 [ 19.761021] Freeing initrd memory: 7048k freed [ 19.761299] audit: initializing netlink socket (disabled) [ 19.761309] audit(1213236329.152:1): initialized [ 19.761358] highmem bounce pool size: 64 pages [ 19.762598] VFS: Disk quotas dquot_6.5.1 [ 19.762632] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 19.762697] io scheduler noop registered [ 19.762699] io scheduler anticipatory registered [ 19.762700] io scheduler deadline registered [ 19.762711] io scheduler cfq registered (default) [ 19.775692] Boot video device is 0000:07:00.0 [ 19.775758] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 19.775776] assign_interrupt_mode Found MSI capability [ 19.775778] Allocate Port Service[0000:00:0a.0:pcie00] [ 19.775821] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 19.775838] assign_interrupt_mode Found MSI capability [ 19.775840] Allocate Port Service[0000:00:0b.0:pcie00] [ 19.775881] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 19.775898] assign_interrupt_mode Found MSI capability [ 19.775899] Allocate Port Service[0000:00:0c.0:pcie00] [ 19.775941] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 19.775958] assign_interrupt_mode Found MSI capability [ 19.775959] Allocate Port Service[0000:00:0d.0:pcie00] [ 19.775999] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 19.776016] assign_interrupt_mode Found MSI capability [ 19.776018] Allocate Port Service[0000:00:0e.0:pcie00] [ 19.776060] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 19.776077] assign_interrupt_mode Found MSI capability [ 19.776079] Allocate Port Service[0000:00:0f.0:pcie00] [ 19.776161] isapnp: Scanning for PnP cards... [ 20.128614] isapnp: No Plug & Play device found [ 20.145126] Real Time Clock Driver v1.12ac [ 20.145203] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 20.145287] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 20.145736] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 20.146198] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 20.146350] input: Macintosh mouse button emulation as /class/input/input0 [ 20.146401] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 20.146712] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.146716] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 20.146823] mice: PS/2 mouse device common for all mice [ 20.146897] EISA: Probing bus 0 at eisa.0 [ 20.146903] Cannot allocate resource for EISA slot 1 [ 20.146918] EISA: Detected 0 cards. [ 20.147039] TCP cubic registered [ 20.147053] NET: Registered protocol family 1 [ 20.147069] Using IPI No-Shortcut mode [ 20.147222] Magic number: 12:621:55 [ 20.147580] Freeing unused kernel memory: 364k freed [ 20.220972] input: AT Translated Set 2 keyboard as /class/input/input1 [ 21.330120] AppArmor: AppArmor initialized<5>audit(1213236330.652:2): type=1505 info="AppArmor initialized" pid=1269 [ 21.337225] fuse init (API version 7.8) [ 21.342088] Failure registering capabilities with primary security module. [ 21.349853] ACPI: Fan [FAN] (on) [ 21.353677] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 21.354966] ACPI: Thermal Zone [THRM] (40 C) [ 21.883449] usbcore: registered new interface driver usbfs [ 21.883471] usbcore: registered new interface driver hub [ 21.883487] usbcore: registered new device driver usb [ 21.883996] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 21.884417] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 21.884426] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 [ 21.884436] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 21.884439] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 21.884571] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 21.884588] ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000 [ 21.913709] SCSI subsystem initialized [ 21.917298] libata version 2.21 loaded. [ 21.930704] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 21.930708] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 21.951592] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 21.968286] usb usb1: configuration #1 chosen from 1 choice [ 21.968308] hub 1-0:1.0: USB hub found [ 21.968317] hub 1-0:1.0: 10 ports detected [ 22.070697] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 22.070707] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17 [ 22.070717] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 22.070719] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 22.070739] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 22.070760] ehci_hcd 0000:00:02.1: debug port 1 [ 22.070763] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 22.070773] ehci_hcd 0000:00:02.1: irq 17, io mem 0xfe02e000 [ 22.070778] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.070836] usb usb2: configuration #1 chosen from 1 choice [ 22.070855] hub 2-0:1.0: USB hub found [ 22.070861] hub 2-0:1.0: 10 ports detected [ 22.176297] sata_nv 0000:00:05.0: version 3.4 [ 22.176704] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 22.176713] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18 [ 22.176746] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 22.176794] scsi0 : sata_nv [ 22.180933] scsi1 : sata_nv [ 22.181024] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 18 [ 22.181027] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 18 [ 22.469822] usb 2-8: new high speed USB device using ehci_hcd and address 2 [ 22.602745] usb 2-8: configuration #1 chosen from 1 choice [ 22.628005] usbcore: registered new interface driver libusual [ 22.631687] Initializing USB Mass Storage driver... [ 22.631740] scsi2 : SCSI emulation for USB Mass Storage devices [ 22.631781] usbcore: registered new interface driver usb-storage [ 22.631783] USB Mass Storage support registered. [ 22.631858] usb-storage: device found at 2 [ 22.631860] usb-storage: waiting for device to settle before scanning [ 22.645711] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 22.653879] ata1.00: ATA-7: SAMSUNG HD300LJ, ZT100-12, max UDMA7 [ 22.653882] ata1.00: 586072368 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 22.669860] ata1.00: configured for UDMA/133 [ 22.981470] ata2: SATA link down (SStatus 0 SControl 300) [ 22.991739] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD300LJ ZT10 PQ: 0 ANSI: 5 [ 22.992183] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 [ 22.992192] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19 [ 22.992224] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 22.992255] scsi3 : sata_nv [ 22.992283] scsi4 : sata_nv [ 22.992328] ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001cc00 irq 19 [ 22.992331] ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001cc08 irq 19 [ 23.301250] ata3: SATA link down (SStatus 0 SControl 300) [ 23.621030] ata4: SATA link down (SStatus 0 SControl 300) [ 23.631617] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23 [ 23.631621] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 23 (level, low) -> IRQ 16 [ 23.631652] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 23.631678] scsi5 : sata_nv [ 23.631870] scsi6 : sata_nv [ 23.632008] ata5: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c402 bmdma 0x0001b800 irq 16 [ 23.632011] ata6: SATA max UDMA/133 cmd 0x0001c000 ctl 0x0001bc02 bmdma 0x0001b808 irq 16 [ 23.940811] ata5: SATA link down (SStatus 0 SControl 300) [ 24.260591] ata6: SATA link down (SStatus 0 SControl 300) [ 24.270877] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 [ 24.270891] NFORCE-MCP55: chipset revision 161 [ 24.270893] NFORCE-MCP55: not 100% native mode: will probe irqs later [ 24.270898] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller [ 24.270904] ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA [ 24.270913] Probing IDE interface ide0... [ 24.288088] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 24.288099] sd 0:0:0:0: [sda] Write Protect is off [ 24.288101] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.288111] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.288159] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 24.288165] sd 0:0:0:0: [sda] Write Protect is off [ 24.288167] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.288175] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.288179] sda: sda1 sda2 [ 24.328055] sd 0:0:0:0: [sda] Attached SCSI disk [ 24.331274] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 24.472765] Attempting manual resume [ 24.472768] swsusp: Resume From Partition 8:2 [ 24.472769] PM: Checking swsusp image. [ 24.472954] PM: Resume from disk failed. [ 24.506279] kjournald starting. Commit interval 5 seconds [ 24.506288] EXT3-fs: mounted filesystem with ordered data mode. [ 25.004154] hda: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive [ 25.675995] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 25.677671] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 25.677675] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17 [ 25.677680] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 25.677686] forcedeth: using HIGHDMA [ 26.195568] eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:08.0 [ 26.196153] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 26.196162] ACPI: PCI Interrupt 0000:01:07.2[B] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20 [ 26.245931] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 27.514431] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0151142123] [ 27.626477] usb-storage: device scan complete [ 27.627849] scsi 2:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2 [ 27.629734] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 27.629758] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 31.000768] NET: Registered protocol family 10 [ 31.000851] lo: Disabled Privacy Extensions [ 31.548705] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 31.548728] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 32.178982] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 32.178990] Uniform CD-ROM driver Revision: 3.20 [ 32.412485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 32.413865] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.663955] gameport: EMU10K1 is pci0000:01:07.1/gameport0, io 0xa800, speed 59659kHz [ 32.688517] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0811 [ 32.688532] usbcore: registered new interface driver usblp [ 32.688535] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 32.799366] logips2pp: Detected unknown logitech mouse model 127 [ 32.946045] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 32.946056] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21 [ 32.948315] Installing spdif_bug patch: Audigy 2 ZS [SB0350] [ 32.992522] Linux agpgart interface v0.102 (c) Dave Jones [ 33.155025] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 33.155030] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 18 [ 33.155044] PCI: Setting latency timer of device 0000:00:06.1 to 64 [ 33.259961] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2 [ 33.262534] parport_pc 00:08: reported by Plug and Play ACPI [ 33.262557] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 33.263789] input: PC Speaker as /class/input/input3 [ 34.007543] lp0: using parport0 (interrupt-driven). [ 34.129486] Adding 2931852k swap on /dev/sda2. Priority:-1 extents:1 across:2931852k [ 34.450418] EXT3 FS on sda1, internal journal [ 36.691024] input: Power Button (FF) as /class/input/input4 [ 36.694753] ACPI: Power Button (FF) [PWRF] [ 36.724894] input: Power Button (CM) as /class/input/input5 [ 36.728596] ACPI: Power Button (CM) [PWRB] [ 36.805668] No dock devices found. [ 37.021902] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (version 2.00.00) [ 37.025990] powernow-k8: BIOS error - no PSB or ACPI _PSS objects [ 38.442358] Failure registering capabilities with primary security module. [ 39.382472] ppdev: user-space parallel port driver [ 39.923221] audit(1213236349.796:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5201 profile="/usr/sbin/cupsd" [ 41.901707] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 41.901712] apm: overridden by ACPI. [ 41.976425] eth0: no IPv6 routers present [ 42.600957] Installing knfsd (copyright (C) 1996