RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '1247043-2620333', '/home/buildd/filecache-default/66264252e0f187c9bd330e2d995d7372488766f4'] Synching the system clock with the buildd NTP service... 17 Sep 14:55:01 ntpdate[31667]: adjust time server 10.211.37.1 offset 0.000033 sec Unpacking chroot for build 1247043-2620333 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '1247043-2620333'] Mounting chroot for build 1247043-2620333 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '1247043-2620333', 'universe'] Attempting OGRE for universe in build-1247043-2620333 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '1247043-2620333', 'deb http://ftpmaster.internal/ubuntu karmic main universe'] Overriding sources.list in build-1247043-2620333 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '1247043-2620333'] Updating debian chroot for build 1247043-2620333 Get:1 http://ftpmaster.internal karmic Release.gpg [189B] Get:2 http://ftpmaster.internal karmic Release [65.9kB] Get:3 http://ftpmaster.internal karmic/main Packages [1347kB] Get:4 http://ftpmaster.internal karmic/universe Packages [5101kB] Fetched 6515kB in 4s (1497kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: insserv libc-bin libc-dev-bin libudev0 mountall The following packages will be upgraded: bash binutils bsdutils cpp-4.4 g++-4.4 gcc-4.4 gcc-4.4-base hostname initscripts libblkid1 libc6 libc6-dev libdbus-1-3 libgcc1 libgomp1 libncurses5 libpam-modules libpam-runtime libpam0g libstdc++6 libstdc++6-4.4-dev libuuid1 linux-libc-dev lsb-base mount ncurses-base ncurses-bin pkg-create-dbgsym python2.6-minimal sysv-rc sysvinit-utils tzdata upstart util-linux zlib1g 35 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/31.4MB of archives. After this operation, 1303kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! bash hostname mount ncurses-bin lsb-base tzdata util-linux libc-bin libc-dev-bin linux-libc-dev libc6-dev libgomp1 cpp-4.4 gcc-4.4-base libgcc1 gcc-4.4 g++-4.4 libstdc++6-4.4-dev libstdc++6 zlib1g binutils libc6 bsdutils libncurses5 ncurses-base sysvinit-utils libpam-modules libudev0 mountall upstart initscripts insserv sysv-rc libuuid1 libblkid1 libdbus-1-3 libpam-runtime libpam0g python2.6-minimal pkg-create-dbgsym debconf: delaying package configuration, since apt-utils is not installed Authentication warning overridden. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9344 files and directories currently installed.) Preparing to replace bash 4.0-4ubuntu1 (using .../bash_4.0-5ubuntu2_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.0-5ubuntu2) ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9344 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_2.95ubuntu1_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (2.95ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9345 files and directories currently installed.) Preparing to replace mount 2.16-1ubuntu1 (using .../mount_2.16-1ubuntu3_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.16-1ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9345 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20090607-1ubuntu1 (using .../ncurses-bin_5.7+20090803-2ubuntu1_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.7+20090803-2ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9345 files and directories currently installed.) Preparing to replace lsb-base 4.0-0ubuntu3 (using .../lsb-base_4.0-0ubuntu4_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (4.0-0ubuntu4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9345 files and directories currently installed.) Preparing to replace tzdata 2009l-1 (using .../tzdata_2009m-1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2009m-1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Sep 17 13:55:38 UTC 2009. Universal Time is now: Thu Sep 17 13:55:38 UTC 2009. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9345 files and directories currently installed.) Preparing to replace util-linux 2.16-1ubuntu1 (using .../util-linux_2.16-1ubuntu3_amd64.deb) ... Unpacking replacement util-linux ... Setting up util-linux (2.16-1ubuntu3) ... Selecting previously deselected package libc-bin. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9347 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.10.1-0ubuntu12_amd64.deb) ... Replacing files in old package libc6 ... Setting up libc-bin (2.10.1-0ubuntu12) ... Selecting previously deselected package libc-dev-bin. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9353 files and directories currently installed.) Unpacking libc-dev-bin (from .../libc-dev-bin_2.10.1-0ubuntu12_amd64.deb) ... Replacing files in old package libc6-dev ... Preparing to replace linux-libc-dev 2.6.31-8.28 (using .../linux-libc-dev_2.6.31-10.34_amd64.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libc6-dev 2.10.1-0ubuntu8 (using .../libc6-dev_2.10.1-0ubuntu12_amd64.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libgomp1 4.4.1-3ubuntu3 (using .../libgomp1_4.4.1-4ubuntu1_amd64.deb) ... Unpacking replacement libgomp1 ... Preparing to replace cpp-4.4 4.4.1-3ubuntu3 (using .../cpp-4.4_4.4.1-4ubuntu1_amd64.deb) ... Unpacking replacement cpp-4.4 ... Preparing to replace gcc-4.4-base 4.4.1-3ubuntu3 (using .../gcc-4.4-base_4.4.1-4ubuntu1_amd64.deb) ... Unpacking replacement gcc-4.4-base ... Setting up gcc-4.4-base (4.4.1-4ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9359 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.1-3ubuntu3 (using .../libgcc1_1%3a4.4.1-4ubuntu1_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.1-4ubuntu1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9359 files and directories currently installed.) Preparing to replace gcc-4.4 4.4.1-3ubuntu3 (using .../gcc-4.4_4.4.1-4ubuntu1_amd64.deb) ... Unpacking replacement gcc-4.4 ... Preparing to replace g++-4.4 4.4.1-3ubuntu3 (using .../g++-4.4_4.4.1-4ubuntu1_amd64.deb) ... Unpacking replacement g++-4.4 ... Preparing to replace libstdc++6-4.4-dev 4.4.1-3ubuntu3 (using .../libstdc++6-4.4-dev_4.4.1-4ubuntu1_amd64.deb) ... Unpacking replacement libstdc++6-4.4-dev ... Preparing to replace libstdc++6 4.4.1-3ubuntu3 (using .../libstdc++6_4.4.1-4ubuntu1_amd64.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.1-4ubuntu1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9359 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-13ubuntu1 (using .../zlib1g_1%3a1.2.3.3.dfsg-13ubuntu3_amd64.deb) ... Unpacking replacement zlib1g ... Setting up zlib1g (1:1.2.3.3.dfsg-13ubuntu3) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9359 files and directories currently installed.) Preparing to replace binutils 2.19.51.20090827-1ubuntu1 (using .../binutils_2.19.91.20090910-0ubuntu1_amd64.deb) ... Unpacking replacement binutils ... Preparing to replace libc6 2.10.1-0ubuntu8 (using .../libc6_2.10.1-0ubuntu12_amd64.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.10.1-0ubuntu12) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9355 files and directories currently installed.) Preparing to replace bsdutils 1:2.16-1ubuntu1 (using .../bsdutils_1%3a2.16-1ubuntu3_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.16-1ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9355 files and directories currently installed.) Preparing to replace libncurses5 5.7+20090607-1ubuntu1 (using .../libncurses5_5.7+20090803-2ubuntu1_amd64.deb) ... Unpacking replacement libncurses5 ... Setting up libncurses5 (5.7+20090803-2ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9355 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20090607-1ubuntu1 (using .../ncurses-base_5.7+20090803-2ubuntu1_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.7+20090803-2ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9355 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61ubuntu16 (using .../sysvinit-utils_2.87dsf-4ubuntu3_amd64.deb) ... Unpacking replacement sysvinit-utils ... Setting up sysvinit-utils (2.87dsf-4ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9362 files and directories currently installed.) Preparing to replace libpam-modules 1.1.0-1ubuntu1 (using .../libpam-modules_1.1.0-2ubuntu1_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.0-2ubuntu1) ... Installing new version of config file /etc/security/namespace.init ... Selecting previously deselected package libudev0. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9362 files and directories currently installed.) Unpacking libudev0 (from .../libudev0_147~-1_amd64.deb) ... Setting up libudev0 (147~-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Selecting previously deselected package mountall. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9368 files and directories currently installed.) Unpacking mountall (from .../mountall_0.1.6_amd64.deb) ... Setting up mountall (0.1.6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9377 files and directories currently installed.) Preparing to replace upstart 0.6.3-1 (using .../upstart_0.6.3-3_amd64.deb) ... Unpacking replacement upstart ... Setting up upstart (0.6.3-3) ... Installing new version of config file /etc/init/rc-sysinit.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9380 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61ubuntu16 (using .../initscripts_2.87dsf-4ubuntu3_amd64.deb) ... Removing unmodified and obsolete conffile /etc/init.d/bootlogs.sh ... Unpacking replacement initscripts ... dpkg: warning: unable to delete old directory '/etc/network/if-up.d': Directory not empty dpkg: warning: unable to delete old directory '/etc/network': Directory not empty Setting up initscripts (2.87dsf-4ubuntu3) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9375 files and directories currently installed.) Unpacking insserv (from .../insserv_1.12.0-11_amd64.deb) ... De-configuring sysv-rc ... Setting up insserv (1.12.0-11) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9403 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61ubuntu16 (using .../sysv-rc_2.87dsf-4ubuntu3_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.87dsf-4ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9403 files and directories currently installed.) Preparing to replace libuuid1 2.16-1ubuntu1 (using .../libuuid1_2.16-1ubuntu3_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.16-1ubuntu3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9403 files and directories currently installed.) Preparing to replace libblkid1 2.16-1ubuntu1 (using .../libblkid1_2.16-1ubuntu3_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.16-1ubuntu3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9403 files and directories currently installed.) Preparing to replace libdbus-1-3 1.2.16-0ubuntu2 (using .../libdbus-1-3_1.2.16-0ubuntu4_amd64.deb) ... Unpacking replacement libdbus-1-3 ... Setting up libdbus-1-3 (1.2.16-0ubuntu4) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9403 files and directories currently installed.) Preparing to replace libpam-runtime 1.1.0-1ubuntu1 (using .../libpam-runtime_1.1.0-2ubuntu1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.0-2ubuntu1) ... pam-auth-update: Local modifications to /etc/pam.d/common-*, not updating. pam-auth-update: Run pam-auth-update --force to override. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9403 files and directories currently installed.) Preparing to replace libpam0g 1.1.0-1ubuntu1 (using .../libpam0g_1.1.0-2ubuntu1_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.0-2ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9403 files and directories currently installed.) Preparing to replace python2.6-minimal 2.6.2-0ubuntu3 (using .../python2.6-minimal_2.6.2-0ubuntu6_amd64.deb) ... Unpacking replacement python2.6-minimal ... Setting up python2.6-minimal (2.6.2-0ubuntu6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9403 files and directories currently installed.) Preparing to replace pkg-create-dbgsym 0.29 (using .../pkg-create-dbgsym_0.30_all.deb) ... Unpacking replacement pkg-create-dbgsym ... Setting up libc-dev-bin (2.10.1-0ubuntu12) ... Setting up linux-libc-dev (2.6.31-10.34) ... Setting up libc6-dev (2.10.1-0ubuntu12) ... Setting up libgomp1 (4.4.1-4ubuntu1) ... Setting up cpp-4.4 (4.4.1-4ubuntu1) ... Setting up binutils (2.19.91.20090910-0ubuntu1) ... Setting up gcc-4.4 (4.4.1-4ubuntu1) ... Setting up pkg-create-dbgsym (0.30) ... Setting up g++-4.4 (4.4.1-4ubuntu1) ... Setting up libstdc++6-4.4-dev (4.4.1-4ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '1247043-2620333', '--nolog', '--batch', '--archive=ubuntu', '--purpose=PRIMARY', '--dist=karmic', '--comp=universe', 'gmorgan_0.25-5.dsc'] Initiating build 1247043-2620333 with 2 processor cores. Automatic build of gmorgan_0.25-5 on crested by sbuild/amd64 1.170.5 Build started at 20090917-1457 ****************************************************************************** gmorgan_0.25-5.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: cdbs, debhelper (>= 5), autotools-dev, libasound2-dev, libfltk1.1-dev, gettext, automake1.10 Checking for already installed source dependencies... cdbs: missing debhelper: missing autotools-dev: missing libasound2-dev: missing libfltk1.1-dev: missing gettext: missing automake1.10: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install cdbs debhelper autotools-dev libasound2-dev libfltk1.1-dev gettext automake1.10 Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf automake bsdmainutils defoma fdupes file fontconfig-config gettext-base groff-base html2text install-info intltool intltool-debian libasound2 libcroco3 libdrm2 libexpat1 libfltk1.1 libfontconfig1 libfreetype6 libgl1-mesa-glx libglib2.0-0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libjpeg62 libmagic1 libncursesw5 libnewt0.52 libpcre3 libpng12-0 libpopt0 libpthread-stubs0 libpthread-stubs0-dev libpython2.6 libreadline6 libsqlite3-0 libssl0.9.8 liburi-perl libwww-perl libx11-6 libx11-data libx11-dev libxau-dev libxau6 libxcb1 libxcb1-dev libxdamage1 libxdmcp-dev libxdmcp6 libxext6 libxfixes3 libxft2 libxinerama1 libxml-parser-perl libxml2 libxrender1 libxxf86vm1 m4 man-db mime-support netbase po-debconf python2.6 ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf whiptail x11-common x11proto-core-dev x11proto-input-dev x11proto-kb-dev xtrans-dev Suggested packages: autoconf2.13 autobook autoconf-archive gnu-standards autoconf-doc libtool wamerican wordlist whois vacation devscripts doc-base dh-make defoma-doc psfontmgr x-ttcidfont-conf dfontmgr libft-perl cvs gettext-doc groff libasound2-plugins libasound2-doc fltk1.1-doc fluid libglu1-mesa-dev libglu-dev libjpeg62-dev libpng12-0-dev libxext-dev libxft-dev libxinerama-dev zlib1g-dev libz-dev libdata-dump-perl libcrypt-ssleay-perl libio-socket-ssl-perl less www-browser libmail-box-perl python2.6-doc python2.6-profiler Recommended packages: curl wget lynx libgl1-mesa-dev libgl-dev libgl1-mesa-dri libglib2.0-data shared-mime-info libgpm2 libfribidi0 libmailtools-perl libhtml-format-perl libcompress-bzip2-perl xml-core ifupdown libmail-sendmail-perl The following NEW packages will be installed: autoconf automake automake1.10 autotools-dev bsdmainutils cdbs debhelper defoma fdupes file fontconfig-config gettext gettext-base groff-base html2text install-info intltool intltool-debian libasound2 libasound2-dev libcroco3 libdrm2 libexpat1 libfltk1.1 libfltk1.1-dev libfontconfig1 libfreetype6 libgl1-mesa-glx libglib2.0-0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libjpeg62 libmagic1 libncursesw5 libnewt0.52 libpcre3 libpng12-0 libpopt0 libpthread-stubs0 libpthread-stubs0-dev libpython2.6 libreadline6 libsqlite3-0 libssl0.9.8 liburi-perl libwww-perl libx11-6 libx11-data libx11-dev libxau-dev libxau6 libxcb1 libxcb1-dev libxdamage1 libxdmcp-dev libxdmcp6 libxext6 libxfixes3 libxft2 libxinerama1 libxml-parser-perl libxml2 libxrender1 libxxf86vm1 m4 man-db mime-support netbase po-debconf python2.6 ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf whiptail x11-common x11proto-core-dev x11proto-input-dev x11proto-kb-dev xtrans-dev 0 upgraded, 81 newly installed, 0 to remove and 0 not upgraded. Need to get 1634kB/30.2MB of archives. After this operation, 89.7MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! x11-common libxau6 libxdmcp6 libxcb1 libx11-data libx11-6 x11proto-core-dev libxau-dev libxdmcp-dev x11proto-input-dev x11proto-kb-dev xtrans-dev libpthread-stubs0 libpthread-stubs0-dev libxcb1-dev libx11-dev libxfixes3 libmagic1 file libpcre3 libglib2.0-0 libncursesw5 libnewt0.52 libpopt0 libreadline6 libsqlite3-0 libssl0.9.8 libxml2 mime-support netbase python2.6 ucf whiptail bsdmainutils gettext-base groff-base install-info libexpat1 libhtml-tagset-perl liburi-perl libhtml-parser-perl libhtml-tree-perl libwww-perl libxext6 libxml-parser-perl man-db m4 autoconf autotools-dev automake automake1.10 html2text libcroco3 gettext intltool-debian po-debconf debhelper fdupes intltool cdbs defoma ttf-dejavu-core ttf-dejavu-extra ttf-dejavu fontconfig-config libpython2.6 libasound2 libasound2-dev libdrm2 libfreetype6 libfontconfig1 libxdamage1 libxxf86vm1 libgl1-mesa-glx libjpeg62 libpng12-0 libxrender1 libxft2 libxinerama1 libfltk1.1 libfltk1.1-dev Authentication warning overridden. Get:1 http://ftpmaster.internal karmic/main automake1.10 1:1.10.2-2ubuntu1 [527kB] Get:2 http://ftpmaster.internal karmic/main libfltk1.1 1.1.9-6 [463kB] Get:3 http://ftpmaster.internal karmic/main libfltk1.1-dev 1.1.9-6 [644kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1634kB in 0s (20.6MB/s) Selecting previously deselected package x11-common. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9403 files and directories currently installed.) Unpacking x11-common (from .../x11-common_1%3a7.4+3ubuntu5_all.deb) ... Selecting previously deselected package libxau6. Unpacking libxau6 (from .../libxau6_1%3a1.0.4-2_amd64.deb) ... Selecting previously deselected package libxdmcp6. Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.2-3_amd64.deb) ... Selecting previously deselected package libxcb1. Unpacking libxcb1 (from .../libxcb1_1.4-1_amd64.deb) ... Selecting previously deselected package libx11-data. Unpacking libx11-data (from .../libx11-data_2%3a1.2.2-1ubuntu1_all.deb) ... Selecting previously deselected package libx11-6. Unpacking libx11-6 (from .../libx11-6_2%3a1.2.2-1ubuntu1_amd64.deb) ... Setting up x11-common (1:7.4+3ubuntu5) ... Selecting previously deselected package x11proto-core-dev. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9754 files and directories currently installed.) Unpacking x11proto-core-dev (from .../x11proto-core-dev_7.0.15-1_all.deb) ... Selecting previously deselected package libxau-dev. Unpacking libxau-dev (from .../libxau-dev_1%3a1.0.4-2_amd64.deb) ... Selecting previously deselected package libxdmcp-dev. Unpacking libxdmcp-dev (from .../libxdmcp-dev_1%3a1.0.2-3_amd64.deb) ... Selecting previously deselected package x11proto-input-dev. Unpacking x11proto-input-dev (from .../x11proto-input-dev_1.5.0-2ubuntu1_all.deb) ... Selecting previously deselected package x11proto-kb-dev. Unpacking x11proto-kb-dev (from .../x11proto-kb-dev_1.0.3-3ubuntu1_all.deb) ... Selecting previously deselected package xtrans-dev. Unpacking xtrans-dev (from .../xtrans-dev_1.2.4-1_all.deb) ... Selecting previously deselected package libpthread-stubs0. Unpacking libpthread-stubs0 (from .../libpthread-stubs0_0.1-2_amd64.deb) ... Selecting previously deselected package libpthread-stubs0-dev. Unpacking libpthread-stubs0-dev (from .../libpthread-stubs0-dev_0.1-2_amd64.deb) ... Selecting previously deselected package libxcb1-dev. Unpacking libxcb1-dev (from .../libxcb1-dev_1.4-1_amd64.deb) ... Selecting previously deselected package libx11-dev. Unpacking libx11-dev (from .../libx11-dev_2%3a1.2.2-1ubuntu1_amd64.deb) ... Selecting previously deselected package libxfixes3. Unpacking libxfixes3 (from .../libxfixes3_1%3a4.0.3-2build1_amd64.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_5.03-1ubuntu1_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../file_5.03-1ubuntu1_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.8-2ubuntu1_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.21.6-0ubuntu7_amd64.deb) ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20090803-2ubuntu1_amd64.deb) ... Selecting previously deselected package libnewt0.52. Unpacking libnewt0.52 (from .../libnewt0.52_0.52.10-4_amd64.deb) ... Selecting previously deselected package libpopt0. Unpacking libpopt0 (from .../libpopt0_1.14-4_amd64.deb) ... Selecting previously deselected package libreadline6. Unpacking libreadline6 (from .../libreadline6_6.0-2ubuntu2_amd64.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.6.16-1_amd64.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-16ubuntu3_amd64.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.3.dfsg-1ubuntu1_amd64.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.46-1ubuntu1_all.deb) ... Selecting previously deselected package netbase. Unpacking netbase (from .../netbase_4.35ubuntu2_all.deb) ... Selecting previously deselected package python2.6. Unpacking python2.6 (from .../python2.6_2.6.2-0ubuntu6_amd64.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0018ubuntu1_all.deb) ... Moving old data out of the way Selecting previously deselected package whiptail. Unpacking whiptail (from .../whiptail_0.52.10-4_amd64.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_6.1.10ubuntu4_amd64.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-6ubuntu2_amd64.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.20.1-5_amd64.deb) ... Selecting previously deselected package install-info. Unpacking install-info (from .../install-info_4.13a.dfsg.1-4_amd64.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-4ubuntu1_amd64.deb) ... Selecting previously deselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously deselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.37+dfsg-1ubuntu1_all.deb) ... Selecting previously deselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.61-1_amd64.deb) ... Selecting previously deselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_3.23-1_all.deb) ... Selecting previously deselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_5.831-1_all.deb) ... Selecting previously deselected package libxext6. Unpacking libxext6 (from .../libxext6_2%3a1.0.99.1-0ubuntu3_amd64.deb) ... Selecting previously deselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.36-1.1build2_amd64.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.6-2_amd64.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../archives/m4_1.4.13-1_amd64.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.64-1ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20090427.1_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.11-1_all.deb) ... Selecting previously deselected package automake1.10. Unpacking automake1.10 (from .../automake1.10_1%3a1.10.2-2ubuntu1_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-14_amd64.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.1-2_amd64.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-6ubuntu2_amd64.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.3.15ubuntu2_all.deb) ... Selecting previously deselected package fdupes. Unpacking fdupes (from .../fdupes_1.50-PR2-2_amd64.deb) ... Selecting previously deselected package intltool. Unpacking intltool (from .../intltool_0.40.6-2_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.59ubuntu2_all.deb) ... Selecting previously deselected package defoma. Unpacking defoma (from .../defoma_0.11.10-0.2ubuntu1_all.deb) ... Selecting previously deselected package ttf-dejavu-core. Unpacking ttf-dejavu-core (from .../ttf-dejavu-core_2.29-2_all.deb) ... Selecting previously deselected package ttf-dejavu-extra. Unpacking ttf-dejavu-extra (from .../ttf-dejavu-extra_2.29-2_all.deb) ... Selecting previously deselected package ttf-dejavu. Unpacking ttf-dejavu (from .../ttf-dejavu_2.29-2_all.deb) ... Selecting previously deselected package fontconfig-config. Unpacking fontconfig-config (from .../fontconfig-config_2.6.0-1ubuntu12_all.deb) ... Selecting previously deselected package libpython2.6. Unpacking libpython2.6 (from .../libpython2.6_2.6.2-0ubuntu6_amd64.deb) ... Selecting previously deselected package libasound2. Unpacking libasound2 (from .../libasound2_1.0.20-3ubuntu5_amd64.deb) ... Selecting previously deselected package libasound2-dev. Unpacking libasound2-dev (from .../libasound2-dev_1.0.20-3ubuntu5_amd64.deb) ... Selecting previously deselected package libdrm2. Unpacking libdrm2 (from .../libdrm2_2.4.13-1ubuntu1_amd64.deb) ... Selecting previously deselected package libfreetype6. Unpacking libfreetype6 (from .../libfreetype6_2.3.9-5_amd64.deb) ... Selecting previously deselected package libfontconfig1. Unpacking libfontconfig1 (from .../libfontconfig1_2.6.0-1ubuntu12_amd64.deb) ... Selecting previously deselected package libxdamage1. Unpacking libxdamage1 (from .../libxdamage1_1%3a1.1.1-4_amd64.deb) ... Selecting previously deselected package libxxf86vm1. Unpacking libxxf86vm1 (from .../libxxf86vm1_1%3a1.0.2-1_amd64.deb) ... Selecting previously deselected package libgl1-mesa-glx. Unpacking libgl1-mesa-glx (from .../libgl1-mesa-glx_7.6.0~git20090817.7c422387-0ubuntu4_amd64.deb) ... Selecting previously deselected package libjpeg62. Unpacking libjpeg62 (from .../libjpeg62_6b-14build1_amd64.deb) ... Selecting previously deselected package libpng12-0. Unpacking libpng12-0 (from .../libpng12-0_1.2.37-1_amd64.deb) ... Selecting previously deselected package libxrender1. Unpacking libxrender1 (from .../libxrender1_1%3a0.9.4-2_amd64.deb) ... Selecting previously deselected package libxft2. Unpacking libxft2 (from .../libxft2_2.1.13-3ubuntu1_amd64.deb) ... Selecting previously deselected package libxinerama1. Unpacking libxinerama1 (from .../libxinerama1_2%3a1.0.3-2_amd64.deb) ... Selecting previously deselected package libfltk1.1. Unpacking libfltk1.1 (from .../libfltk1.1_1.1.9-6_amd64.deb) ... Selecting previously deselected package libfltk1.1-dev. Unpacking libfltk1.1-dev (from .../libfltk1.1-dev_1.1.9-6_amd64.deb) ... Setting up libxau6 (1:1.0.4-2) ... Setting up libxdmcp6 (1:1.0.2-3) ... Setting up libxcb1 (1.4-1) ... Setting up libx11-data (2:1.2.2-1ubuntu1) ... Setting up libx11-6 (2:1.2.2-1ubuntu1) ... Setting up x11proto-core-dev (7.0.15-1) ... Setting up libxau-dev (1:1.0.4-2) ... Setting up libxdmcp-dev (1:1.0.2-3) ... Setting up x11proto-input-dev (1.5.0-2ubuntu1) ... Setting up x11proto-kb-dev (1.0.3-3ubuntu1) ... Setting up xtrans-dev (1.2.4-1) ... Setting up libpthread-stubs0 (0.1-2) ... Setting up libpthread-stubs0-dev (0.1-2) ... Setting up libxcb1-dev (1.4-1) ... Setting up libx11-dev (2:1.2.2-1ubuntu1) ... Setting up libxfixes3 (1:4.0.3-2build1) ... Setting up libmagic1 (5.03-1ubuntu1) ... Setting up file (5.03-1ubuntu1) ... Setting up libpcre3 (7.8-2ubuntu1) ... Setting up libglib2.0-0 (2.21.6-0ubuntu7) ... Setting up libncursesw5 (5.7+20090803-2ubuntu1) ... Setting up libnewt0.52 (0.52.10-4) ... Setting up libpopt0 (1.14-4) ... Setting up libreadline6 (6.0-2ubuntu2) ... Setting up libsqlite3-0 (3.6.16-1) ... Setting up libssl0.9.8 (0.9.8g-16ubuntu3) ... Setting up libxml2 (2.7.3.dfsg-1ubuntu1) ... Setting up mime-support (3.46-1ubuntu1) ... update-alternatives: warning: /etc/alternatives/view is dangling, it will be updated with best choice. update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode. Setting up netbase (4.35ubuntu2) ... Setting up python2.6 (2.6.2-0ubuntu6) ... Setting up ucf (3.0018ubuntu1) ... Setting up whiptail (0.52.10-4) ... Setting up bsdmainutils (6.1.10ubuntu4) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. Setting up gettext-base (0.17-6ubuntu2) ... Setting up groff-base (1.20.1-5) ... Setting up install-info (4.13a.dfsg.1-4) ... Setting up libexpat1 (2.0.1-4ubuntu1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up liburi-perl (1.37+dfsg-1ubuntu1) ... Setting up libhtml-parser-perl (3.61-1) ... Setting up libhtml-tree-perl (3.23-1) ... Setting up libwww-perl (5.831-1) ... Setting up libxext6 (2:1.0.99.1-0ubuntu3) ... Setting up libxml-parser-perl (2.36-1.1build2) ... Setting up man-db (2.5.6-2) ... Building database of manual pages ... ... skipping, since this is a buildd Setting up m4 (1.4.13-1) ... Setting up autoconf (2.64-1ubuntu1) ... Setting up autotools-dev (20090427.1) ... Setting up automake (1:1.11-1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode. Setting up automake1.10 (1:1.10.2-2ubuntu1) ... Setting up html2text (1.3.2a-14) ... Setting up libcroco3 (0.6.1-2) ... Setting up gettext (0.17-6ubuntu2) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16) ... Setting up debhelper (7.3.15ubuntu2) ... Setting up fdupes (1.50-PR2-2) ... Setting up intltool (0.40.6-2) ... Setting up cdbs (0.4.59ubuntu2) ... Setting up defoma (0.11.10-0.2ubuntu1) ... Setting up ttf-dejavu-core (2.29-2) ... Setting up ttf-dejavu-extra (2.29-2) ... Setting up ttf-dejavu (2.29-2) ... Setting up fontconfig-config (2.6.0-1ubuntu12) ... Setting up libpython2.6 (2.6.2-0ubuntu6) ... Setting up libasound2 (1.0.20-3ubuntu5) ... Setting up libasound2-dev (1.0.20-3ubuntu5) ... Setting up libdrm2 (2.4.13-1ubuntu1) ... Setting up libfreetype6 (2.3.9-5) ... Setting up libfontconfig1 (2.6.0-1ubuntu12) ... Setting up libxdamage1 (1:1.1.1-4) ... Setting up libxxf86vm1 (1:1.0.2-1) ... Setting up libgl1-mesa-glx (7.6.0~git20090817.7c422387-0ubuntu4) ... Setting up libjpeg62 (6b-14build1) ... Setting up libpng12-0 (1.2.37-1) ... Setting up libxrender1 (1:0.9.4-2) ... Setting up libxft2 (2.1.13-3ubuntu1) ... Setting up libxinerama1 (2:1.0.3-2) ... Setting up libfltk1.1 (1.1.9-6) ... Setting up libfltk1.1-dev (1.1.9-6) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.10.1-0ubuntu12 make_3.81-6 dpkg-dev_1.15.3.1ubuntu1 g++-4.4_4.4.1-4ubuntu1 gcc-4.4_4.4.1-4ubuntu1 binutils_2.19.91.20090910-0ubuntu1 libstdc++6_4.4.1-4ubuntu1 libstdc++6-4.4-dev_4.4.1-4ubuntu1 ------------------------------------------------------------------------------ sh: gcc: not found dpkg-source: warning: Couldn't determine gcc system type, falling back to default (native compilation) gpg: Signature made Sat Aug 22 22:18:03 2009 BST using DSA key ID 6868F41F gpg: Can't check signature: public key not found dpkg-source: extracting gmorgan in gmorgan-0.25 dpkg-source: unpacking gmorgan_0.25.orig.tar.gz dpkg-source: applying /home/buildd/build-1247043-2620333/gmorgan_0.25-5.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package gmorgan dpkg-buildpackage: source version 0.25-5 dpkg-buildpackage: host architecture amd64 /usr/bin/fakeroot debian/rules clean test -x debian/rules dh_testroot /usr/bin/make -C . -k distclean make[1]: Entering directory `/build/buildd/gmorgan-0.25' make[1]: *** No rule to make target `distclean'. make[1]: Leaving directory `/build/buildd/gmorgan-0.25' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-build for i in ./config.guess ./config.sub ./config.rpath ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done dh_clean rm -f debian/stamp-autotools-files /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/build/buildd/gmorgan-0.25' for i in ./config.guess ./config.sub ./config.rpath ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done make[1]: Leaving directory `/build/buildd/gmorgan-0.25' if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/01_ftbfs_amd64.diff Patch debian/patches/01_ftbfs_amd64.diff is not applied. if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "reverse-patches" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi for dir in debian/patches ; do \ rm -f $dir/*.log ; \ done for f in po/Makefile.in po/POTFILES po/remove-potcdate.sed aclocal.m4 configure m4/po.m4 ; do [ ! -e $f.d-r-orig ] || mv $f.d-r-orig $f ; done debian/rules build test -x debian/rules mkdir -p "." /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/build/buildd/gmorgan-0.25' for i in ./config.guess ./config.sub ./config.rpath ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done make[1]: Leaving directory `/build/buildd/gmorgan-0.25' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/01_ftbfs_amd64.diff Trying patch debian/patches/01_ftbfs_amd64.diff at level 1 ... 0 ... success. if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi make[1]: Entering directory `/build/buildd/gmorgan-0.25' if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi if test -e /usr/share/gnulib/config/config.rpath ; then \ for i in ./config.rpath ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/gnulib/config/config.rpath $i ; \ fi ; \ done ; \ fi for f in po/Makefile.in po/POTFILES po/remove-potcdate.sed aclocal.m4 configure m4/po.m4 ; do [ -e $f.d-r-orig ] || cp -p $f $f.d-r-orig ; done [ ! -f /usr/share/aclocal/po.m4 ] || cp /usr/share/aclocal/po.m4 m4/po.m4 make[1]: Leaving directory `/build/buildd/gmorgan-0.25' if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi if test -e /usr/share/gnulib/config/config.rpath ; then \ for i in ./config.rpath ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/gnulib/config/config.rpath $i ; \ fi ; \ done ; \ fi for f in po/Makefile.in po/POTFILES po/remove-potcdate.sed aclocal.m4 configure m4/po.m4 ; do [ -e $f.d-r-orig ] || cp -p $f $f.d-r-orig ; done [ ! -f /usr/share/aclocal/po.m4 ] || cp /usr/share/aclocal/po.m4 m4/po.m4 if [ -d ./m4 ]; then m4="-I m4"; fi; if [ -e ./aclocal.m4 ]; then cd . && aclocal-1.10 $m4; fi touch debian/stamp-autotools-files chmod a+x /build/buildd/gmorgan-0.25/./configure cd . && CC="cc" CXX="g++" CFLAGS="-g -O2 -g -Wall -O2" CXXFLAGS="-g -O2 -g -Wall -O2" CPPFLAGS="" LDFLAGS="-Wl,-Bsymbolic-functions" /build/buildd/gmorgan-0.25/./configure --build=x86_64-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/gmorgan" --disable-maintainer-mode --disable-dependency-tracking --srcdir=. checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... none checking for gcc... cc checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking dependency style of cc... none checking whether make sets $(MAKE)... (cached) yes checking for an ANSI C-conforming const... yes checking for inline... inline checking how to run the C preprocessor... cc -E checking for egrep... grep -E checking for ANSI C header files... yes checking for ANSI C header files... (cached) yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking types of arguments for select... int,fd_set *,struct timeval * checking for bzero... yes checking for memset... yes checking for select... yes checking for strdup... yes checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking whether NLS is requested... yes checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for unistd.h... (cached) yes checking alsa/asoundlib.h usability... yes checking alsa/asoundlib.h presence... yes checking for alsa/asoundlib.h... yes checking for fltk-config... /usr/bin/fltk-config configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating data/Makefile config.status: creating data/skins/Makefile config.status: creating data/skins/Blue/Makefile config.status: creating po/Makefile.in config.status: creating m4/Makefile config.status: creating data/skins/Aluminium/Makefile config.status: creating data/skins/Aluminium2/Makefile config.status: creating data/help/Makefile config.status: creating data/skins/DeskAlum/Makefile config.status: creating data/skins/Mini/Makefile config.status: executing depfiles commands config.status: executing default-1 commands config.status: creating po/POTFILES config.status: creating po/Makefile /usr/bin/make -C . make[1]: Entering directory `/build/buildd/gmorgan-0.25' cd . && /bin/bash /build/buildd/gmorgan-0.25/missing --run automake-1.9 --gnu /build/buildd/gmorgan-0.25/missing: line 52: automake-1.9: command not found WARNING: `automake-1.9' is missing on your system. You should only need it if you modified `Makefile.am', `acinclude.m4' or `configure.in'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. cd . && /bin/bash /build/buildd/gmorgan-0.25/missing --run autoconf /bin/bash ./config.status --recheck running /bin/bash /build/buildd/gmorgan-0.25/./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=${prefix}/include --mandir=${prefix}/share/man --infodir=${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --libexecdir=${prefix}/lib/gmorgan --disable-maintainer-mode --disable-dependency-tracking --srcdir=. CC=cc CFLAGS=-g -O2 -g -Wall -O2 CPPFLAGS= CXXFLAGS=-g -O2 -g -Wall -O2 CXX=g++ LDFLAGS=-Wl,-Bsymbolic-functions build_alias=x86_64-linux-gnu --no-create --no-recursion configure: WARNING: unrecognized options: --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... none checking for gcc... cc checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... none checking whether make sets $(MAKE)... (cached) yes checking for an ANSI C-conforming const... yes checking for inline... inline checking how to run the C preprocessor... cc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for ANSI C header files... (cached) yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking types of arguments for select... int,fd_set *,struct timeval * checking for bzero... yes checking for memset... yes checking for select... yes checking for strdup... yes checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking whether NLS is requested... yes checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for unistd.h... (cached) yes checking alsa/asoundlib.h usability... yes checking alsa/asoundlib.h presence... yes checking for alsa/asoundlib.h... yes checking for fltk-config... /usr/bin/fltk-config configure: creating ./config.status configure: WARNING: unrecognized options: --disable-maintainer-mode /bin/bash ./config.status config.status: creating Makefile config.status: WARNING: 'Makefile.in' seems to ignore the --datarootdir setting config.status: creating src/Makefile config.status: WARNING: 'src/Makefile.in' seems to ignore the --datarootdir setting config.status: creating data/Makefile config.status: WARNING: 'data/Makefile.in' seems to ignore the --datarootdir setting config.status: creating data/skins/Makefile config.status: WARNING: 'data/skins/Makefile.in' seems to ignore the --datarootdir setting config.status: creating data/skins/Blue/Makefile config.status: WARNING: 'data/skins/Blue/Makefile.in' seems to ignore the --datarootdir setting config.status: creating po/Makefile.in config.status: creating m4/Makefile config.status: WARNING: 'm4/Makefile.in' seems to ignore the --datarootdir setting config.status: creating data/skins/Aluminium/Makefile config.status: WARNING: 'data/skins/Aluminium/Makefile.in' seems to ignore the --datarootdir setting config.status: creating data/skins/Aluminium2/Makefile config.status: WARNING: 'data/skins/Aluminium2/Makefile.in' seems to ignore the --datarootdir setting config.status: creating data/help/Makefile config.status: WARNING: 'data/help/Makefile.in' seems to ignore the --datarootdir setting config.status: creating data/skins/DeskAlum/Makefile config.status: WARNING: 'data/skins/DeskAlum/Makefile.in' seems to ignore the --datarootdir setting config.status: creating data/skins/Mini/Makefile config.status: WARNING: 'data/skins/Mini/Makefile.in' seems to ignore the --datarootdir setting config.status: executing depfiles commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile make[1]: Leaving directory `/build/buildd/gmorgan-0.25' make[1]: Entering directory `/build/buildd/gmorgan-0.25' Making all in m4 make[2]: Entering directory `/build/buildd/gmorgan-0.25/m4' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/build/buildd/gmorgan-0.25/m4' Making all in src make[2]: Entering directory `/build/buildd/gmorgan-0.25/src' g++ -DLOCALEDIR=\"/usr/share/locale/\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"gmorgan\" -DVERSION=\"0.255555\" -DSTDC_HEADERS=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=\(fd_set\ \*\) -DSELECT_TYPE_ARG5=\(struct\ timeval\ \*\) -DHAVE_BZERO=1 -DHAVE_MEMSET=1 -DHAVE_SELECT=1 -DHAVE_STRDUP=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_UNISTD_H=1 -I. -I. -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -c -o main.o main.C g++ -DLOCALEDIR=\"/usr/share/locale/\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"gmorgan\" -DVERSION=\"0.255555\" -DSTDC_HEADERS=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=\(fd_set\ \*\) -DSELECT_TYPE_ARG5=\(struct\ timeval\ \*\) -DHAVE_BZERO=1 -DHAVE_MEMSET=1 -DHAVE_SELECT=1 -DHAVE_STRDUP=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_UNISTD_H=1 -I. -I. -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -c -o gmorgan.o gmorgan.C g++ -DLOCALEDIR=\"/usr/share/locale/\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"gmorgan\" -DVERSION=\"0.255555\" -DSTDC_HEADERS=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=\(fd_set\ \*\) -DSELECT_TYPE_ARG5=\(struct\ timeval\ \*\) -DHAVE_BZERO=1 -DHAVE_MEMSET=1 -DHAVE_SELECT=1 -DHAVE_STRDUP=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_UNISTD_H=1 -I. -I. -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -c -o gmorgan.fileIO.o gmorgan.fileIO.C g++ -DLOCALEDIR=\"/usr/share/locale/\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"gmorgan\" -DVERSION=\"0.255555\" -DSTDC_HEADERS=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=\(fd_set\ \*\) -DSELECT_TYPE_ARG5=\(struct\ timeval\ \*\) -DHAVE_BZERO=1 -DHAVE_MEMSET=1 -DHAVE_SELECT=1 -DHAVE_STRDUP=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_UNISTD_H=1 -I. -I. -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -c -o gmorgan.MIDIExport.o gmorgan.MIDIExport.C g++ -DLOCALEDIR=\"/usr/share/locale/\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"gmorgan\" -DVERSION=\"0.255555\" -DSTDC_HEADERS=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=\(fd_set\ \*\) -DSELECT_TYPE_ARG5=\(struct\ timeval\ \*\) -DHAVE_BZERO=1 -DHAVE_MEMSET=1 -DHAVE_SELECT=1 -DHAVE_STRDUP=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_UNISTD_H=1 -I. -I. -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -c -o gmorgan.MIDIExport.Song.o gmorgan.MIDIExport.Song.C g++ -DLOCALEDIR=\"/usr/share/locale/\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"gmorgan\" -DVERSION=\"0.255555\" -DSTDC_HEADERS=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=\(fd_set\ \*\) -DSELECT_TYPE_ARG5=\(struct\ timeval\ \*\) -DHAVE_BZERO=1 -DHAVE_MEMSET=1 -DHAVE_SELECT=1 -DHAVE_STRDUP=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_UNISTD_H=1 -I. -I. -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -c -o gmorgan.MIDIImport.o gmorgan.MIDIImport.C g++ -DLOCALEDIR=\"/usr/share/locale/\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"gmorgan\" -DVERSION=\"0.255555\" -DSTDC_HEADERS=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=\(fd_set\ \*\) -DSELECT_TYPE_ARG5=\(struct\ timeval\ \*\) -DHAVE_BZERO=1 -DHAVE_MEMSET=1 -DHAVE_SELECT=1 -DHAVE_STRDUP=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_UNISTD_H=1 -I. -I. -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -c -o gmorgan.MIDIIn.o gmorgan.MIDIIn.C g++ -DLOCALEDIR=\"/usr/share/locale/\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"gmorgan\" -DVERSION=\"0.255555\" -DSTDC_HEADERS=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=\(fd_set\ \*\) -DSELECT_TYPE_ARG5=\(struct\ timeval\ \*\) -DHAVE_BZERO=1 -DHAVE_MEMSET=1 -DHAVE_SELECT=1 -DHAVE_STRDUP=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_UNISTD_H=1 -I. -I. -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -c -o gmorgan.MIDIOUT.o gmorgan.MIDIOUT.C g++ -DLOCALEDIR=\"/usr/share/locale/\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"gmorgan\" -DVERSION=\"0.255555\" -DSTDC_HEADERS=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=\(fd_set\ \*\) -DSELECT_TYPE_ARG5=\(struct\ timeval\ \*\) -DHAVE_BZERO=1 -DHAVE_MEMSET=1 -DHAVE_SELECT=1 -DHAVE_STRDUP=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_UNISTD_H=1 -I. -I. -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -c -o gmorgan.varios.o gmorgan.varios.C g++ -DLOCALEDIR=\"/usr/share/locale/\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"gmorgan\" -DVERSION=\"0.255555\" -DSTDC_HEADERS=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=\(fd_set\ \*\) -DSELECT_TYPE_ARG5=\(struct\ timeval\ \*\) -DHAVE_BZERO=1 -DHAVE_MEMSET=1 -DHAVE_SELECT=1 -DHAVE_STRDUP=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_UNISTD_H=1 -I. -I. -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -c -o GMORGAN.o GMORGAN.cxx GMORGAN.cxx: In member function 'void GMORGAN::cb_Aplica_i(Fl_Button*, void*)': GMORGAN.cxx:22749: warning: 'int fl_ask(const char*, ...)' is deprecated (declared at /usr/include/FL/fl_ask.H:59) GMORGAN.cxx:22749: warning: 'int fl_ask(const char*, ...)' is deprecated (declared at /usr/include/FL/fl_ask.H:59) g++ -I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT -Wl,-Bsymbolic-functions -o gmorgan main.o gmorgan.o gmorgan.fileIO.o gmorgan.MIDIExport.o gmorgan.MIDIExport.Song.o gmorgan.MIDIImport.o gmorgan.MIDIIn.o gmorgan.MIDIOUT.o gmorgan.varios.o GMORGAN.o -Wl,-Bsymbolic-functions -lfltk_images -lfltk -lasound make[2]: Leaving directory `/build/buildd/gmorgan-0.25/src' Making all in data make[2]: Entering directory `/build/buildd/gmorgan-0.25/data' Making all in skins make[3]: Entering directory `/build/buildd/gmorgan-0.25/data/skins' Making all in Blue make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Blue' make[4]: Nothing to be done for `all'. make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Blue' Making all in Aluminium make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium' make[4]: Nothing to be done for `all'. make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium' Making all in Aluminium2 make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium2' make[4]: Nothing to be done for `all'. make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium2' Making all in DeskAlum make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/DeskAlum' make[4]: Nothing to be done for `all'. make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/DeskAlum' Making all in Mini make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Mini' make[4]: Nothing to be done for `all'. make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Mini' make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins' make[4]: Nothing to be done for `all-am'. make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins' make[3]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins' Making all in help make[3]: Entering directory `/build/buildd/gmorgan-0.25/data/help' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/build/buildd/gmorgan-0.25/data/help' make[3]: Entering directory `/build/buildd/gmorgan-0.25/data' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/build/buildd/gmorgan-0.25/data' make[2]: Leaving directory `/build/buildd/gmorgan-0.25/data' Making all in po make[2]: Entering directory `/build/buildd/gmorgan-0.25/po' make[2]: Leaving directory `/build/buildd/gmorgan-0.25/po' make[2]: Entering directory `/build/buildd/gmorgan-0.25' make[2]: Nothing to be done for `all-am'. make[2]: Leaving directory `/build/buildd/gmorgan-0.25' make[1]: Leaving directory `/build/buildd/gmorgan-0.25' touch debian/stamp-makefile-build DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/fakeroot debian/rules binary-arch test -x debian/rules dh_testroot dh_clean -k dh_installdirs -A mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi if test -e /usr/share/gnulib/config/config.rpath ; then \ for i in ./config.rpath ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/gnulib/config/config.rpath $i ; \ fi ; \ done ; \ fi for f in po/Makefile.in po/POTFILES po/remove-potcdate.sed aclocal.m4 configure m4/po.m4 ; do [ -e $f.d-r-orig ] || cp -p $f $f.d-r-orig ; done [ ! -f /usr/share/aclocal/po.m4 ] || cp /usr/share/aclocal/po.m4 m4/po.m4 DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/make -C . install DESTDIR=/build/buildd/gmorgan-0.25/debian/gmorgan/ localedir=/usr/share/locale/ make[1]: Entering directory `/build/buildd/gmorgan-0.25' Making install in m4 make[2]: Entering directory `/build/buildd/gmorgan-0.25/m4' make[3]: Entering directory `/build/buildd/gmorgan-0.25/m4' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/gmorgan-0.25/m4' make[2]: Leaving directory `/build/buildd/gmorgan-0.25/m4' Making install in src make[2]: Entering directory `/build/buildd/gmorgan-0.25/src' make[3]: Entering directory `/build/buildd/gmorgan-0.25/src' test -z "/usr/bin" || /bin/mkdir -p "/build/buildd/gmorgan-0.25/debian/gmorgan//usr/bin" /usr/bin/install -c 'gmorgan' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/bin/gmorgan' make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/gmorgan-0.25/src' make[2]: Leaving directory `/build/buildd/gmorgan-0.25/src' Making install in data make[2]: Entering directory `/build/buildd/gmorgan-0.25/data' Making install in skins make[3]: Entering directory `/build/buildd/gmorgan-0.25/data/skins' Making install in Blue make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Blue' make[5]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Blue' make[5]: Nothing to be done for `install-exec-am'. test -z "/usr/share/gmorgan/skins/Blue" || /bin/mkdir -p "/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/Blue" /usr/bin/install -c -m 644 'sinte.jpg' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/Blue/sinte.jpg' make[5]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Blue' make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Blue' Making install in Aluminium make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium' make[5]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium' make[5]: Nothing to be done for `install-exec-am'. test -z "/usr/share/gmorgan/skins/Aluminium" || /bin/mkdir -p "/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/Aluminium" /usr/bin/install -c -m 644 'BrushedMetal.png' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/Aluminium/BrushedMetal.png' make[5]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium' make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium' Making install in Aluminium2 make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium2' make[5]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium2' make[5]: Nothing to be done for `install-exec-am'. test -z "/usr/share/gmorgan/skins/Aluminium2" || /bin/mkdir -p "/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/Aluminium2" /usr/bin/install -c -m 644 'grey_800.png' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/Aluminium2/grey_800.png' make[5]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium2' make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Aluminium2' Making install in DeskAlum make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/DeskAlum' make[5]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/DeskAlum' make[5]: Nothing to be done for `install-exec-am'. test -z "/usr/share/gmorgan/skins/DeskAlum" || /bin/mkdir -p "/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/DeskAlum" /usr/bin/install -c -m 644 'BrushedMetal.png' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/DeskAlum/BrushedMetal.png' make[5]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/DeskAlum' make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/DeskAlum' Making install in Mini make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Mini' make[5]: Entering directory `/build/buildd/gmorgan-0.25/data/skins/Mini' make[5]: Nothing to be done for `install-exec-am'. test -z "/usr/share/gmorgan/skins/Mini" || /bin/mkdir -p "/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/Mini" /usr/bin/install -c -m 644 'grey_800.png' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/Mini/grey_800.png' make[5]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Mini' make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins/Mini' make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/skins' make[5]: Entering directory `/build/buildd/gmorgan-0.25/data/skins' make[5]: Nothing to be done for `install-exec-am'. test -z "/usr/share/gmorgan/skins" || /bin/mkdir -p "/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins" /usr/bin/install -c -m 644 'skin.txt' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/skins/skin.txt' make[5]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins' make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins' make[3]: Leaving directory `/build/buildd/gmorgan-0.25/data/skins' Making install in help make[3]: Entering directory `/build/buildd/gmorgan-0.25/data/help' make[4]: Entering directory `/build/buildd/gmorgan-0.25/data/help' make[4]: Nothing to be done for `install-exec-am'. test -z "/usr/share/gmorgan/help" || /bin/mkdir -p "/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/help" /usr/bin/install -c -m 644 'help.html' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/help/help.html' /usr/bin/install -c -m 644 'gmorgan_logo.jpg' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/help/gmorgan_logo.jpg' /usr/bin/install -c -m 644 'help-es.html' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/help/help-es.html' make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data/help' make[3]: Leaving directory `/build/buildd/gmorgan-0.25/data/help' make[3]: Entering directory `/build/buildd/gmorgan-0.25/data' make[4]: Entering directory `/build/buildd/gmorgan-0.25/data' make[4]: Nothing to be done for `install-exec-am'. test -z "/usr/share/gmorgan" || /bin/mkdir -p "/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan" /usr/bin/install -c -m 644 'GMDN.txt' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/GMDN.txt' /usr/bin/install -c -m 644 'GMPresetList.txt' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/GMPresetList.txt' /usr/bin/install -c -m 644 'MisPat.gmp' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/MisPat.gmp' /usr/bin/install -c -m 644 'MisProgs.gmo' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/MisProgs.gmo' /usr/bin/install -c -m 644 'MisStyles.gms' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/MisStyles.gms' /usr/bin/install -c -m 644 'Mendigation.gmsong' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/Mendigation.gmsong' /usr/bin/install -c -m 644 'The_Grrl.gmsong' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/The_Grrl.gmsong' /usr/bin/install -c -m 644 'HowInsensate.gmsong' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/HowInsensate.gmsong' /usr/bin/install -c -m 644 'Four.gmsong' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/Four.gmsong' /usr/bin/install -c -m 644 'FourAntiR.gmsong' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/FourAntiR.gmsong' /usr/bin/install -c -m 644 'AllBlues.gmsong' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/AllBlues.gmsong' /usr/bin/install -c -m 644 'StyleLib.lib' '/build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gmorgan/StyleLib.lib' make[4]: Leaving directory `/build/buildd/gmorgan-0.25/data' make[3]: Leaving directory `/build/buildd/gmorgan-0.25/data' make[2]: Leaving directory `/build/buildd/gmorgan-0.25/data' Making install in po make[2]: Entering directory `/build/buildd/gmorgan-0.25/po' /bin/mkdir -p /build/buildd/gmorgan-0.25/debian/gmorgan//usr/share installing es.gmo as /build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/locale//es/LC_MESSAGES/gmorgan.mo installing fr.gmo as /build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/locale//fr/LC_MESSAGES/gmorgan.mo installing de.gmo as /build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/locale//de/LC_MESSAGES/gmorgan.mo if test "gmorgan" = "gettext-tools"; then \ /bin/mkdir -p /build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /build/buildd/gmorgan-0.25/debian/gmorgan//usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory `/build/buildd/gmorgan-0.25/po' make[2]: Entering directory `/build/buildd/gmorgan-0.25' make[3]: Entering directory `/build/buildd/gmorgan-0.25' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/gmorgan-0.25' make[2]: Leaving directory `/build/buildd/gmorgan-0.25' make[1]: Leaving directory `/build/buildd/gmorgan-0.25' dh_installdirs -pgmorgan dh_installdocs -pgmorgan ./README ./NEWS ./AUTHORS dh_installexamples -pgmorgan dh_installman -pgmorgan dh_installinfo -pgmorgan dh_installmenu -pgmorgan dh_installcron -pgmorgan dh_installinit -pgmorgan dh_installdebconf -pgmorgan dh_installemacsen -pgmorgan dh_installcatalogs -pgmorgan dh_installpam -pgmorgan dh_installlogrotate -pgmorgan dh_installlogcheck -pgmorgan dh_installchangelogs -pgmorgan dh_installudev -pgmorgan dh_lintian -pgmorgan dh_install -pgmorgan dh_link -pgmorgan dh_installmime -pgmorgan dh_strip -pgmorgan dh_strip debug symbol extraction: all non-arch-all packages for this build platform amd64: gmorgan dh_strip debug symbol extraction: packages to act on: gmorgan dh_strip debug symbol extraction: ignored packages: WARNING: not running pkgbinarymangler for this package, as requested dpkg-deb: building package `gmorgan-dbgsym' in `../gmorgan-dbgsym_0.25-5_amd64.ddeb'. dh_compress -pgmorgan dh_fixperms -pgmorgan dh_makeshlibs -pgmorgan dh_installdeb -pgmorgan dh_perl -pgmorgan dh_shlibdeps -pgmorgan dh_gencontrol -pgmorgan # symlink identical documentation to depending packages [ -n "$CDBS_NO_DOC_SYMLINKING" ] || \ [ -h debian/gmorgan/usr/share/doc ] || \ [ ! -d debian/gmorgan/usr/share/doc ] || \ for dep in `perl -ne 'if (/^(Pre-)?Depends:/) {s/^\w+://; foreach (split /,/) { split; print($_[0], "\n"); } }' debian/gmorgan/DEBIAN/control`; do \ if [ -d debian/$dep/usr/share/doc ]; then \ echo "Searching for duplicated docs in dependency $dep..."; \ rootdir=`pwd`; \ (cd debian/gmorgan/usr/share/doc/gmorgan; find -type f ! -name copyright | while read f; do \ thisfile="$rootdir/debian/gmorgan/usr/share/doc/gmorgan/$f"; \ depfile="$rootdir/debian/$dep/usr/share/doc/$dep/$f"; \ if [ -f $depfile -o -L $depfile ] && zcmp $thisfile $depfile >/dev/null; then \ echo " symlinking $f in gmorgan to file in $dep"; \ rm $thisfile; ln -s /usr/share/doc/$dep/$f $thisfile; \ fi; \ done ); \ fi; \ done # symlink identical Gnome help files within packages if [ -z "$CDBS_NO_GNOME_HELP_SYMLINKING" ] && [ -d debian/gmorgan/usr/share/gnome/help ]; then \ cd debian/gmorgan && LC_ALL=C fdupes -r1nq usr/share/gnome/help | while read s; do \ set -- $(echo $s | tr ' ' '\n' | sort); \ f=$1; shift; \ for d; do \ echo "symlinking duplicate Gnome help file $d to $f"; \ rm $d; ln -s /$f $d; \ done; \ done; \ fi dh_link -p gmorgan dh_md5sums -pgmorgan dh_builddeb -pgmorgan pkgstriptranslations: processing control file: ./debian/gmorgan/DEBIAN/control, package gmorgan, directory ./debian/gmorgan ./debian/gmorgan/usr/share/applications/gmorgan.desktop: does not have gettext domain, not stripping pkgstriptranslations: preparing translation tarball gmorgan_0.25-5_amd64_translations.tar.gz...done (7 files) pkgstriptranslations: static tarball already exists pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " dpkg-deb: warning: 'debian/gmorgan/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `gmorgan' in `../gmorgan_0.25-5_amd64.deb'. dpkg-genchanges -B -mUbuntu/amd64 Build Daemon >../gmorgan_0.25-5_amd64.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code Use of uninitialized value within %f2p in hash element at /usr/bin/dpkg-genchanges line 501. Use of uninitialized value within @_ in list assignment at /usr/share/perl5/Dpkg/Arch.pm line 299. Use of uninitialized value $b in string eq at /usr/share/perl5/Dpkg/Arch.pm line 301. Use of uninitialized value $_ in pattern match (m//) at /usr/share/perl5/Dpkg/Arch.pm line 250. Use of uninitialized value $arch in hash element at /usr/share/perl5/Dpkg/Arch.pm line 257. dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20090917-1459 Publishing chroot-autobuild/build/buildd/gmorgan_0.25-5_amd64_translations.tar.gz for rosetta. Publishing debug debs. chroot-autobuild/build/buildd/gmorgan_0.25-5_amd64.deb: new debian package, version 2.0. size 691568 bytes: control archive= 1904 bytes. 917 bytes, 18 lines control 2226 bytes, 32 lines md5sums 185 bytes, 7 lines * postinst #!/bin/sh 160 bytes, 5 lines * postrm #!/bin/sh Package: gmorgan Version: 0.25-5 Architecture: amd64 Maintainer: Ubuntu Developers Original-Maintainer: Bart Martens Installed-Size: 2324 Depends: libasound2 (>> 1.0.18), libc6 (>= 2.4), libfltk1.1 (>= 1.1.6), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1) Suggests: timidity Section: sound Priority: optional Homepage: http://gmorgan.sourceforge.net/ Description: MIDI rhythm station emulator software A modern organ for play in real time or sequence, full midi configurable, can export live or sequence performances to MIDI file format. Maintain 500 patterns, 100 Styles, 100 Sound Combiantion in memory. Style Library Pattern BD allows easy new pattern creation, can import MIDI files as patterns, input chords can be controlled by mouse, PC keyboard or MIDI keyboard. Sound edition, chord song sequencer, guided playback and extensive documentation. chroot-autobuild/build/buildd/gmorgan_0.25-5_amd64.deb: drwxr-xr-x root/root 0 2009-09-17 14:59 ./ drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/ drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/bin/ -rwxr-xr-x root/root 1084816 2009-09-17 14:59 ./usr/bin/gmorgan drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/ drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/gmorgan/ drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/gmorgan/skins/ drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/gmorgan/skins/Blue/ -rw-r--r-- root/root 26092 2009-09-17 14:59 ./usr/share/gmorgan/skins/Blue/sinte.jpg drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/gmorgan/skins/Aluminium/ -rw-r--r-- root/root 106456 2009-09-17 14:59 ./usr/share/gmorgan/skins/Aluminium/BrushedMetal.png drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/gmorgan/skins/Aluminium2/ -rw-r--r-- root/root 62655 2009-09-17 14:59 ./usr/share/gmorgan/skins/Aluminium2/grey_800.png drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/gmorgan/skins/DeskAlum/ -rw-r--r-- root/root 106456 2009-09-17 14:59 ./usr/share/gmorgan/skins/DeskAlum/BrushedMetal.png drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/gmorgan/skins/Mini/ -rw-r--r-- root/root 62655 2009-09-17 14:59 ./usr/share/gmorgan/skins/Mini/grey_800.png -rw-r--r-- root/root 14341 2009-09-17 14:59 ./usr/share/gmorgan/skins/skin.txt drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/gmorgan/help/ -rw-r--r-- root/root 48132 2009-09-17 14:59 ./usr/share/gmorgan/help/help.html -rw-r--r-- root/root 11806 2009-09-17 14:59 ./usr/share/gmorgan/help/gmorgan_logo.jpg -rw-r--r-- root/root 59107 2009-09-17 14:59 ./usr/share/gmorgan/help/help-es.html -rw-r--r-- root/root 9539 2009-09-17 14:59 ./usr/share/gmorgan/GMDN.txt -rw-r--r-- root/root 2316 2009-09-17 14:59 ./usr/share/gmorgan/GMPresetList.txt -rw-r--r-- root/root 456882 2009-09-17 14:59 ./usr/share/gmorgan/MisPat.gmp -rw-r--r-- root/root 16487 2009-09-17 14:59 ./usr/share/gmorgan/MisProgs.gmo -rw-r--r-- root/root 12254 2009-09-17 14:59 ./usr/share/gmorgan/MisStyles.gms -rw-r--r-- root/root 4041 2009-09-17 14:59 ./usr/share/gmorgan/Mendigation.gmsong -rw-r--r-- root/root 3969 2009-09-17 14:59 ./usr/share/gmorgan/The_Grrl.gmsong -rw-r--r-- root/root 3949 2009-09-17 14:59 ./usr/share/gmorgan/HowInsensate.gmsong -rw-r--r-- root/root 3937 2009-09-17 14:59 ./usr/share/gmorgan/Four.gmsong -rw-r--r-- root/root 4463 2009-09-17 14:59 ./usr/share/gmorgan/FourAntiR.gmsong -rw-r--r-- root/root 4429 2009-09-17 14:59 ./usr/share/gmorgan/AllBlues.gmsong -rw-r--r-- root/root 25960 2009-09-17 14:59 ./usr/share/gmorgan/StyleLib.lib drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/locale/ drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/locale/es/ drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/locale/es/LC_MESSAGES/ -rw-r--r-- root/root 16266 2009-09-17 14:59 ./usr/share/locale/es/LC_MESSAGES/gmorgan.mo drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/locale/fr/ drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/locale/fr/LC_MESSAGES/ -rw-r--r-- root/root 10368 2009-09-17 14:59 ./usr/share/locale/fr/LC_MESSAGES/gmorgan.mo drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/locale/de/ drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/locale/de/LC_MESSAGES/ -rw-r--r-- root/root 11479 2009-09-17 14:59 ./usr/share/locale/de/LC_MESSAGES/gmorgan.mo drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/doc/ drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/doc/gmorgan/ -rw-r--r-- root/root 21 2005-11-08 15:19 ./usr/share/doc/gmorgan/NEWS.gz -rw-r--r-- root/root 710 2005-11-08 15:19 ./usr/share/doc/gmorgan/AUTHORS -rw-r--r-- root/root 1096 2009-09-17 14:58 ./usr/share/doc/gmorgan/copyright -rw-r--r-- root/root 10549 2005-11-08 15:19 ./usr/share/doc/gmorgan/README.gz -rw-r--r-- root/root 823 2009-09-17 14:58 ./usr/share/doc/gmorgan/changelog.Debian.gz drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/menu/ -rw-r--r-- root/root 106 2009-09-17 14:58 ./usr/share/menu/gmorgan drwxr-xr-x root/root 0 2009-09-17 14:59 ./usr/share/applications/ -rw-r--r-- root/root 177 2009-09-17 14:58 ./usr/share/applications/gmorgan.desktop gmorgan_0.25-5_amd64.changes: Format: 1.8 Date: Sat, 22 Aug 2009 23:09:43 +0200 Source: gmorgan Binary: gmorgan Architecture: amd64 amd64_translations Version: 0.25-5 Distribution: karmic Urgency: low Maintainer: Ubuntu/amd64 Build Daemon Changed-By: Bart Martens Description: gmorgan - MIDI rhythm station emulator software Closes: 543102 Changes: gmorgan (0.25-5) unstable; urgency=low . * Build-Depends: automake1.10. Fixes FTBFS. Closes: #543102. Checksums-Sha1: d00da9d960f1e8b08de6a59a00065f0c6a3186d2 691568 gmorgan_0.25-5_amd64.deb d82bdd4dc776939f31dd33a978cfc4a4f42e8eab 34397 gmorgan_0.25-5_amd64_translations.tar.gz Checksums-Sha256: f92aa5ad43c2802eda8ae31efc15b447aedb918bb9f1e9ae78517c5fc97e6774 691568 gmorgan_0.25-5_amd64.deb 312851760a4cc961e2aa8ede204d55458372b6fe475a3e42847ff4166bbdf3ad 34397 gmorgan_0.25-5_amd64_translations.tar.gz Files: f6ee7e6f69334ef556010481ca886fee 691568 sound optional gmorgan_0.25-5_amd64.deb 3b3c4424c353d77edc1d8a62f30c1a38 34397 raw-translations - gmorgan_0.25-5_amd64_translations.tar.gz ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/gmorgan-0.25 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge groff-base libx11-data m4 libxdmcp-dev fontconfig-config defoma ttf-dejavu-core gettext file libhtml-parser-perl ttf-dejavu libdrm2 liburi-perl libasound2-dev x11-common autotools-dev python2.6 libx11-dev libcroco3 libpopt0 libfreetype6 automake libjpeg62 libssl0.9.8 install-info libxcb1 libgl1-mesa-glx x11proto-input-dev html2text libfltk1.1 libpthread-stubs0 debhelper libfontconfig1 libmagic1 libexpat1 bsdmainutils libxau6 fdupes libx11-6 automake1.10 xtrans-dev libglib2.0-0 mime-support libnewt0.52 x11proto-core-dev whiptail intltool libxdamage1 libxcb1-dev libwww-perl libxdmcp6 libxfixes3 libhtml-tree-perl po-debconf libxml-parser-perl libhtml-tagset-perl libxml2 netbase libpython2.6 libfltk1.1-dev libpng12-0 man-db libxxf86vm1 x11proto-kb-dev intltool-debian libxrender1 libpthread-stubs0-dev ucf cdbs libxau-dev gettext-base ttf-dejavu-extra libxft2 libxext6 libasound2 libsqlite3-0 libreadline6 libxinerama1 libpcre3 autoconf libncursesw5 (Reading database ... 13897 files and directories currently installed.) Removing libasound2-dev ... Removing automake ... update-alternatives: using /usr/bin/automake-1.10 to provide /usr/bin/automake (automake) in auto mode. Removing libfltk1.1-dev ... Purging configuration files for libfltk1.1-dev ... Removing cdbs ... Removing libasound2 ... Purging configuration files for libasound2 ... Removing libx11-dev ... Removing x11proto-input-dev ... Removing libfltk1.1 ... Purging configuration files for libfltk1.1 ... Removing debhelper ... Removing fdupes ... Removing xtrans-dev ... Removing intltool ... Removing libxcb1-dev ... Removing po-debconf ... Removing libxml-parser-perl ... Removing libpython2.6 ... Purging configuration files for libpython2.6 ... Removing libpng12-0 ... Purging configuration files for libpng12-0 ... Removing man-db ... Purging configuration files for man-db ... Removing x11proto-kb-dev ... Removing intltool-debian ... Removing libpthread-stubs0-dev ... Removing libxau-dev ... Removing libxft2 ... Purging configuration files for libxft2 ... Removing libxinerama1 ... Purging configuration files for libxinerama1 ... Removing groff-base ... Purging configuration files for groff-base ... Removing libxdmcp-dev ... Removing gettext ... Removing python2.6 ... Purging configuration files for python2.6 ... dpkg: warning: while removing python2.6, directory '/usr/share/applications' not empty so not removed. Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libjpeg62 ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing libgl1-mesa-glx ... Purging configuration files for libgl1-mesa-glx ... Removing html2text ... Purging configuration files for html2text ... Removing libpthread-stubs0 ... Removing libfontconfig1 ... Purging configuration files for libfontconfig1 ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing automake1.10 ... Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing mime-support ... Purging configuration files for mime-support ... Removing x11proto-core-dev ... Removing libxdamage1 ... Purging configuration files for libxdamage1 ... Removing libwww-perl ... Removing libxfixes3 ... Purging configuration files for libxfixes3 ... Removing libhtml-tree-perl ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing netbase ... Purging configuration files for netbase ... dpkg: warning: while removing netbase, directory '/etc/network' not empty so not removed. Removing libxxf86vm1 ... Purging configuration files for libxxf86vm1 ... Removing libxrender1 ... Purging configuration files for libxrender1 ... Removing gettext-base ... Removing libxext6 ... Purging configuration files for libxext6 ... Removing libsqlite3-0 ... Purging configuration files for libsqlite3-0 ... Removing libreadline6 ... Purging configuration files for libreadline6 ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Removing autoconf ... Purging configuration files for autoconf ... Removing libncursesw5 ... Purging configuration files for libncursesw5 ... Removing m4 ... Removing fontconfig-config ... Purging configuration files for fontconfig-config ... Removing libhtml-parser-perl ... Removing ttf-dejavu ... Removing libdrm2 ... Purging configuration files for libdrm2 ... Removing liburi-perl ... Removing x11-common ... Purging configuration files for x11-common ... Removing autotools-dev ... Removing libfreetype6 ... Purging configuration files for libfreetype6 ... Removing install-info ... Removing libx11-6 ... Purging configuration files for libx11-6 ... Removing libhtml-tagset-perl ... Removing ucf ... Purging configuration files for ucf ... Removing ttf-dejavu-extra ... Purging configuration files for ttf-dejavu-extra ... Removing libx11-data ... dpkg: warning: while removing libx11-data, directory '/usr/share/X11' not empty so not removed. Removing ttf-dejavu-core ... Purging configuration files for ttf-dejavu-core ... dpkg: warning: while removing ttf-dejavu-core, directory '/usr/share/fonts' not empty so not removed. Removing libxcb1 ... Purging configuration files for libxcb1 ... Removing libxau6 ... Purging configuration files for libxau6 ... Removing libxdmcp6 ... Purging configuration files for libxdmcp6 ... Removing defoma ... Purging configuration files for defoma ... dpkg: warning: while removing defoma, directory '/etc/defoma' not empty so not removed. Removing file ... Purging configuration files for file ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing whiptail ... Removing libpopt0 ... Purging configuration files for libpopt0 ... Removing libnewt0.52 ... Purging configuration files for libnewt0.52 ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20090917-1500 Build needed 00:00:32, 11436k disk space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '1247043-2620333'] Scanning for processes to kill in build /home/buildd/build-1247043-2620333/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '1247043-2620333'] Unmounting chroot for build 1247043-2620333... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '1247043-2620333'] Removing build 1247043-2620333