grub2 1.98+20100720-1ubuntu1 source package in Ubuntu

Changelog

grub2 (1.98+20100720-1ubuntu1) maverick; urgency=low

  * Resynchronise with Debian.  Remaining changes:
    - Adjust for default Ubuntu boot options ("quiet splash").
    - Default to hiding the menu; holding down Shift at boot will show it.
    - Set a monochromatic theme for Ubuntu.
    - Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
      recovery mode, quiet option, tweak how memtest86+ is displayed, and
      use UUIDs where appropriate.
    - Fix backslash-escaping in merge_debconf_into_conf.
    - Remove "GNU/Linux" from default distributor string.
    - Add crashkernel= options if kdump and makedumpfile are available.
    - If other operating systems are installed, then automatically unhide
      the menu.  Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
      if available to check whether Shift is pressed.  If it is, show the
      menu, otherwise boot immediately.  If keystatus is not available, then
      fall back to a short delay interruptible with Escape.
    - Allow Shift to interrupt 'sleep --interruptible'.
    - Don't display introductory message about line editing unless we're
      actually offering a shell prompt.  Don't clear the screen just before
      booting if we never drew the menu in the first place.
    - Remove some verbose messages printed before reading the configuration
      file.
    - Suppress progress messages as the kernel and initrd load for
      non-recovery kernel menu entries.
    - Change prepare_grub_to_access_device to handle filesystems
      loop-mounted on file images.
    - Ignore devices loop-mounted from files in 10_linux.
    - Show the boot menu if the previous boot failed, that is if it failed
      to get to the end of one of the normal runlevels.
    - Handle RAID devices containing virtio components.
    - Don't generate /boot/grub/device.map during grub-install or
      grub-mkconfig by default.
    - Adjust upgrade version checks for Ubuntu.
    - Don't display "GRUB loading" unless Shift is held down.
    - Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
      our backport of the grub-doc split.
    - Fix LVM/RAID probing in the absence of /boot/grub/device.map.
    - Look for .mo files in /usr/share/locale-langpack as well, in
      preference.
    - Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
    - Probe all devices in 'grub-probe --target=drive' if
      /boot/grub/device.map is missing.
    - Adjust hostdisk id for hard disks, allowing grub-setup to use its
      standard workaround for broken BIOSes.
    - grub-common Breaks: lupin-support (<< 0.30) due to a grub-mkimage
      syntax change.
    - Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
    - Use qemu rather than qemu-system-i386.
    - Extend the EFI version of grub-install to be able to install into an
      EFI System Partition mounted on /boot/efi in a location that complies
      with the EFI specification.
    - Upgrade the installed core image when upgrading grub-efi-ia32 or
      grub-efi-amd64, although only if /boot/efi/EFI/ubuntu already exists.
    - Make grub-efi-ia32 and grub-efi-amd64 depend on efibootmgr so that
      grub-install works properly.
    - Program vesafb on BIOS systems rather than efifb, and return to
      enabling gfxpayload=keep by default if the kernel has the necessary
      support built-in.

grub2 (1.98+20100720-1) unstable; urgency=low

  * New Bazaar snapshot.
    - Link to Info documentation on changes from GRUB Legacy in README
      (closes: #502623).
    - Add support for mdadm metadata formats 1.x (closes: #492897).

  [ Aaron M. Ucko ]
  * Compare -trunk kernels earlier than numeric ABIs (closes: #568160).

  [ Colin Watson ]
  * Remove /boot/grub/device.map, /boot/grub/grubenv,
    /boot/grub/installed-version, and /boot/grub/locale/ on purge, if
    permitted (closes: #547679).
  * Convert from CDBS to dh.
  * Use exact-version dependencies in grub2 and grub-efi, to reduce
    potential confusion.
  * Raise priority of grub-common and grub-pc to optional (also done in
    archive overrides).
  * Copy-edit debian/presubj.
  * Use 'mktemp -t' rather than hardcoding /tmp (closes: #589537).

  [ Mario 'BitKoenig' Holbe ]
  * Update /etc/grub.d/05_debian_theme to handle multiple entries in
    GRUB_TERMINAL_OUTPUT (closes: #589322).

  [ Updated translations ]
  * Simplified Chinese (zh_CN.po) by YunQiang Su (closes: #589013).
  * Russian (ru.po) by Yuri Kozlov (closes: #589244).
  * Swedish (sv.po) by Martin Bagge / brother (closes: #589259).
  * Bulgarian (bg.po) by Damyan Ivanov (closes: #589272).
  * Indonesian (id.po) by Arief S Fitrianto (closes: #589318).
  * Arabic (ar.po) by Ossama M. Khayat.
  * Basque (eu.po) by Iñaki Larrañaga Murgoitio (closes: #589489).
  * Persian (fa.po) by Bersam Karbasion (closes: #589544).
  * Czech (cs.po) by Miroslav Kure (closes: #589568).
  * Belarusian (be.po) by Viktar Siarheichyk (closes: #589634).
 -- Colin Watson <email address hidden>   Wed, 21 Jul 2010 10:10:21 +0100

Upload details

Uploaded by:
Colin Watson on 2010-07-21
Uploaded to:
Maverick
Original maintainer:
Ubuntu Development Team
Component:
main
Architectures:
i386 kfreebsd-i386 hurd-i386 kopensolaris-i386 amd64 kfreebsd-amd64 powerpc sparc mipsel
Section:
admin
Urgency:
Low Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size MD5 Checksum
grub2_1.98+20100720.orig.tar.gz 2.0 MiB 2803710578d401c04ef6a89301e255b2
grub2_1.98+20100720-1ubuntu1.diff.gz 450.9 KiB 642ae615a7bf03e5c01c9aba90f77b9c
grub2_1.98+20100720-1ubuntu1.dsc 2.9 KiB 4e4d1908d63b3b71cdf371412f6a06ef

View changes file

Binary packages built by this source

grub-common: GRand Unified Bootloader, version 2 (common files)

 This package contains common files shared by the distinct flavours of GRUB.

grub-coreboot: GRand Unified Bootloader, version 2 (Coreboot version)

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub2.
 .
 This package contains a version of GRUB that has been built for use with
 platforms running the Coreboot firmware.

grub-efi: GRand Unified Bootloader, version 2 (dummy package)

 This is a dummy transitional package that depends on either grub-efi-ia32 or
 grub-efi-amd64, depending on the architecture.

grub-efi-amd64: GRand Unified Bootloader, version 2 (EFI-AMD64 version)

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub2.
 .
 This package contains a version of GRUB that has been built for use with
 EFI-AMD64 architecture, such as the one provided by Intel Macs (that is, unless
 a BIOS interface has been activated).

grub-efi-ia32: GRand Unified Bootloader, version 2 (EFI-IA32 version)

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub2.
 .
 This package contains a version of GRUB that has been built for use with
 EFI-IA32 architecture, such as the one provided by Intel Macs (that is, unless
 a BIOS interface has been activated).

grub-emu: GRand Unified Bootloader, version 2 (emulated version)

 This package contains grub-emu, an emulated version of GRUB. It is only
 provided for debugging purposes.

grub-firmware-qemu: GRUB firmware image for QEMU

 This package contains a binary of GRUB that has been built for use as
 firmware for QEMU. It can be used as a replacement for the standard
 PC BIOS provided by the bochsbios package (bios.bin).
 .
 In order to make QEMU use this firmware, simply add `-bios grub.bin' when
 invoking it.
 .
 This package behaves in the same way as GRUB for coreboot, but doesn't
 contain any code from coreboot itself, and is only suitable for QEMU. If
 you want to install GRUB as firmware on real hardware, you need to use the
 grub-coreboot package, and manually combine that with coreboot.

grub-ieee1275: GRand Unified Bootloader, version 2 (Open Firmware version)

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub2.
 .
 This package contains a version of GRUB that has been built for use with
 Open Firmware implementations.

grub-linuxbios: GRand Unified Bootloader, version 2 (dummy package)

 This is a dummy transitional package that depends on grub-coreboot.

grub-pc: GRand Unified Bootloader, version 2 (PC/BIOS version)

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub2.
  - VESA-based graphical mode with background image support and complete 24-bit
    color set.
  - Support for extended charsets. Users can write UTF-8 text to their menu
    entries.
 .
 This package contains a version of GRUB that has been built for use with
 traditional PC/BIOS architecture.

grub-rescue-pc: GRUB bootable rescue images, version 2 (PC/BIOS version)

 This package contains two GRUB rescue images that have been built for use with
 traditional PC/BIOS architecture:
 .
  - grub-rescue-floppy.img: floppy image.
  - grub-rescue-cdrom.iso: El Torito CDROM image.

grub2: GRand Unified Bootloader, version 2 (dummy package)

 This is a dummy transitional package to handle GRUB 2 upgrades. It can be
 safely removed.