RUN: /usr/share/launchpad-buildd/slavebin/slave-prep ['slave-prep'] Forking launchpad-buildd slave process... Kernel version: Linux kishi02 3.2.0-98-highbank #138-Ubuntu SMP PREEMPT Mon Jan 11 13:24:41 UTC 2016 armv7l Buildd toolchain package versions: launchpad-buildd_138 python-lpbuildd_138 sbuild_0.65.2-1ubuntu2~ubuntu12.04.1~ppa8 bzr_2.5.1-0ubuntu2 dpkg-dev_1.16.1.2ubuntu7.7 python-debian_0.1.27ubuntu1~ubuntu12.04.1~ppa2. Syncing the system clock with the buildd NTP service... 15 Jun 12:27:59 ntpdate[3195]: adjust time server 10.211.37.1 offset 0.000003 sec RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', 'PACKAGEBUILD-10022900', '/home/buildd/filecache-default/2569747bf3e651e91ea4c9c8449746fa1ff3dc11'] Unpacking chroot for build PACKAGEBUILD-10022900 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', 'PACKAGEBUILD-10022900'] Mounting chroot for build PACKAGEBUILD-10022900 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', 'PACKAGEBUILD-10022900', 'deb http://ftpmaster.internal/ubuntu yakkety main universe', 'deb http://ftpmaster.internal/ubuntu yakkety-security main universe', 'deb http://ftpmaster.internal/ubuntu yakkety-updates main universe', 'deb http://ftpmaster.internal/ubuntu yakkety-proposed main universe'] Overriding sources.list in build-PACKAGEBUILD-10022900 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', 'PACKAGEBUILD-10022900', 'armhf'] Updating debian chroot for build PACKAGEBUILD-10022900 Get:1 http://ftpmaster.internal/ubuntu yakkety InRelease [247 kB] Get:2 http://ftpmaster.internal/ubuntu yakkety-security InRelease [92.2 kB] Get:3 http://ftpmaster.internal/ubuntu yakkety-updates InRelease [92.2 kB] Get:4 http://ftpmaster.internal/ubuntu yakkety-proposed InRelease [95.7 kB] Get:5 http://ftpmaster.internal/ubuntu yakkety/main armhf Packages [1143 kB] Get:6 http://ftpmaster.internal/ubuntu yakkety/main Translation-en [566 kB] Get:7 http://ftpmaster.internal/ubuntu yakkety/universe armhf Packages [7488 kB] Get:8 http://ftpmaster.internal/ubuntu yakkety/universe Translation-en [4448 kB] Get:9 http://ftpmaster.internal/ubuntu yakkety-security/main armhf Packages [64 B] Get:10 http://ftpmaster.internal/ubuntu yakkety-security/main Translation-en [64 B] Get:11 http://ftpmaster.internal/ubuntu yakkety-security/universe armhf Packages [64 B] Get:12 http://ftpmaster.internal/ubuntu yakkety-security/universe Translation-en [64 B] Get:13 http://ftpmaster.internal/ubuntu yakkety-updates/main armhf Packages [64 B] Get:14 http://ftpmaster.internal/ubuntu yakkety-updates/main Translation-en [64 B] Get:15 http://ftpmaster.internal/ubuntu yakkety-updates/universe armhf Packages [64 B] Get:16 http://ftpmaster.internal/ubuntu yakkety-updates/universe Translation-en [64 B] Get:17 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf Packages [53.0 kB] Get:18 http://ftpmaster.internal/ubuntu yakkety-proposed/main Translation-en [23.0 kB] Get:19 http://ftpmaster.internal/ubuntu yakkety-proposed/universe armhf Packages [279 kB] Get:20 http://ftpmaster.internal/ubuntu yakkety-proposed/universe Translation-en [137 kB] Fetched 14.7 MB in 8s (1649 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following package was automatically installed and is no longer required: libprocps4 Use 'sudo apt autoremove' to remove it. The following NEW packages will be installed: libpng16-16 libprocps5 The following packages will be upgraded: apt apt-transport-https base-files bash binutils bsdutils bzip2 cpp-5 debconf dmsetup dpkg dpkg-dev g++-5 gcc-5 gcc-5-base gcc-6-base grep hostname init init-system-helpers initscripts insserv libapt-pkg5.0 libasan2 libatomic1 libblkid1 libbz2-1.0 libcap2 libcap2-bin libcc1-0 libdebconfclient0 libdevmapper1.02.1 libdpkg-perl libfdisk1 libgcc-5-dev libgcc1 libgcrypt20 libgdbm3 libgnutls30 libgomp1 libgpg-error0 libgssapi-krb5-2 libisl15 libk5crypto3 libkrb5-3 libkrb5support0 libldap-2.4-2 libmount1 libmpfr4 libncurses5 libncursesw5 libperl5.22 libpng12-0 librtmp1 libsasl2-2 libsasl2-modules-db libseccomp2 libselinux1 libsemanage-common libsemanage1 libsepol1 libslang2 libsmartcols1 libsqlite3-0 libstdc++-5-dev libstdc++6 libsystemd0 libtasn1-6 libtinfo5 libubsan0 libudev1 libusb-0.1-4 libuuid1 linux-libc-dev lsb-base make mount ncurses-base ncurses-bin optipng perl perl-base perl-modules-5.22 pkgbinarymangler policyrcd-script-zg2 procps sed systemd systemd-sysv sysv-rc sysvinit-utils tar tzdata ubuntu-keyring util-linux zlib1g 96 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 83.0 MB of archives. After this operation, 171 MB of additional disk space will be used. Get:1 http://ftpmaster.internal/ubuntu yakkety/main armhf base-files armhf 9.6ubuntu2 [56.5 kB] Get:2 http://ftpmaster.internal/ubuntu yakkety/main armhf bash armhf 4.3-14ubuntu2 [502 kB] Get:3 http://ftpmaster.internal/ubuntu yakkety/main armhf bsdutils armhf 1:2.28-5ubuntu2 [51.7 kB] Get:4 http://ftpmaster.internal/ubuntu yakkety/main armhf dpkg armhf 1.18.7ubuntu1 [2067 kB] Get:5 http://ftpmaster.internal/ubuntu yakkety/main armhf grep armhf 2.25-3 [142 kB] Get:6 http://ftpmaster.internal/ubuntu yakkety/main armhf hostname armhf 3.17ubuntu1 [10.9 kB] Get:7 http://ftpmaster.internal/ubuntu yakkety/main armhf libsmartcols1 armhf 2.28-5ubuntu2 [56.1 kB] Get:8 http://ftpmaster.internal/ubuntu yakkety/main armhf libuuid1 armhf 2.28-5ubuntu2 [14.5 kB] Get:9 http://ftpmaster.internal/ubuntu yakkety/main armhf libblkid1 armhf 2.28-5ubuntu2 [93.5 kB] Get:10 http://ftpmaster.internal/ubuntu yakkety/main armhf libfdisk1 armhf 2.28-5ubuntu2 [125 kB] Get:11 http://ftpmaster.internal/ubuntu yakkety/main armhf insserv armhf 1.14.0-5.3ubuntu1 [34.1 kB] Get:12 http://ftpmaster.internal/ubuntu yakkety/main armhf debconf all 1.5.59ubuntu1 [136 kB] Get:13 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf sysv-rc all 2.88dsf-59.6ubuntu1 [18.1 kB] Get:14 http://ftpmaster.internal/ubuntu yakkety/main armhf libgpg-error0 armhf 1.22-2 [29.9 kB] Get:15 http://ftpmaster.internal/ubuntu yakkety/main armhf libgcrypt20 armhf 1.7.0-2 [335 kB] Get:16 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf initscripts armhf 2.88dsf-59.6ubuntu1 [23.4 kB] Get:17 http://ftpmaster.internal/ubuntu yakkety/main armhf util-linux armhf 2.28-5ubuntu2 [821 kB] Get:18 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf sysvinit-utils armhf 2.88dsf-59.6ubuntu1 [20.7 kB] Get:19 http://ftpmaster.internal/ubuntu yakkety/main armhf init-system-helpers all 1.34ubuntu1 [31.9 kB] Get:20 http://ftpmaster.internal/ubuntu yakkety/main armhf libsystemd0 armhf 230-2git1 [193 kB] Get:21 http://ftpmaster.internal/ubuntu yakkety/main armhf systemd armhf 230-2git1 [3143 kB] Get:22 http://ftpmaster.internal/ubuntu yakkety/main armhf perl-modules-5.22 all 5.22.2-1 [2642 kB] Get:23 http://ftpmaster.internal/ubuntu yakkety/main armhf libperl5.22 armhf 5.22.2-1 [2708 kB] Get:24 http://ftpmaster.internal/ubuntu yakkety/main armhf perl armhf 5.22.2-1 [237 kB] Get:25 http://ftpmaster.internal/ubuntu yakkety/main armhf perl-base armhf 5.22.2-1 [1183 kB] Get:26 http://ftpmaster.internal/ubuntu yakkety/main armhf bzip2 armhf 1.0.6-8build1 [31.0 kB] Get:27 http://ftpmaster.internal/ubuntu yakkety/main armhf libbz2-1.0 armhf 1.0.6-8build1 [29.0 kB] Get:28 http://ftpmaster.internal/ubuntu yakkety/main armhf libgdbm3 armhf 1.8.3-14 [15.3 kB] Get:29 http://ftpmaster.internal/ubuntu yakkety/main armhf zlib1g armhf 1:1.2.8.dfsg-2ubuntu5 [45.4 kB] Get:30 http://ftpmaster.internal/ubuntu yakkety/main armhf libcap2 armhf 1:2.25-1 [12.3 kB] Get:31 http://ftpmaster.internal/ubuntu yakkety/main armhf libselinux1 armhf 2.5-3 [56.4 kB] Get:32 http://ftpmaster.internal/ubuntu yakkety/main armhf libmount1 armhf 2.28-5ubuntu2 [103 kB] Get:33 http://ftpmaster.internal/ubuntu yakkety/main armhf libseccomp2 armhf 2.3.1-2ubuntu2 [30.0 kB] Get:34 http://ftpmaster.internal/ubuntu yakkety/main armhf libcap2-bin armhf 1:2.25-1 [20.1 kB] Get:35 http://ftpmaster.internal/ubuntu yakkety/main armhf lsb-base all 9.20160110ubuntu1 [13.7 kB] Get:36 http://ftpmaster.internal/ubuntu yakkety/main armhf mount armhf 2.28-5ubuntu2 [119 kB] Get:37 http://ftpmaster.internal/ubuntu yakkety/main armhf ncurses-bin armhf 6.0+20160319-1ubuntu1 [131 kB] Get:38 http://ftpmaster.internal/ubuntu yakkety/main armhf sed armhf 4.2.2-7.1 [133 kB] Get:39 http://ftpmaster.internal/ubuntu yakkety/main armhf tar armhf 1.29-1 [185 kB] Get:40 http://ftpmaster.internal/ubuntu yakkety/main armhf init armhf 1.34ubuntu1 [4242 B] Get:41 http://ftpmaster.internal/ubuntu yakkety/main armhf ncurses-base all 6.0+20160319-1ubuntu1 [16.7 kB] Get:42 http://ftpmaster.internal/ubuntu yakkety/main armhf gcc-6-base armhf 6.1.1-6ubuntu11 [17.1 kB] Get:43 http://ftpmaster.internal/ubuntu yakkety/main armhf libgcc1 armhf 1:6.1.1-6ubuntu11 [38.6 kB] Get:44 http://ftpmaster.internal/ubuntu yakkety/main armhf libstdc++6 armhf 6.1.1-6ubuntu11 [356 kB] Get:45 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf libapt-pkg5.0 armhf 1.3~exp2 [657 kB] Get:46 http://ftpmaster.internal/ubuntu yakkety/main armhf ubuntu-keyring all 2016.05.13 [16.5 kB] Get:47 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf apt armhf 1.3~exp2 [997 kB] Get:48 http://ftpmaster.internal/ubuntu yakkety/main armhf systemd-sysv armhf 230-2git1 [16.6 kB] Get:49 http://ftpmaster.internal/ubuntu yakkety/main armhf libdebconfclient0 armhf 0.213ubuntu1 [5632 B] Get:50 http://ftpmaster.internal/ubuntu yakkety/main armhf libncurses5 armhf 6.0+20160319-1ubuntu1 [74.3 kB] Get:51 http://ftpmaster.internal/ubuntu yakkety/main armhf libtinfo5 armhf 6.0+20160319-1ubuntu1 [65.6 kB] Get:52 http://ftpmaster.internal/ubuntu yakkety/main armhf libncursesw5 armhf 6.0+20160319-1ubuntu1 [93.8 kB] Get:53 http://ftpmaster.internal/ubuntu yakkety/main armhf libsepol1 armhf 2.5-1 [188 kB] Get:54 http://ftpmaster.internal/ubuntu yakkety/main armhf libsemanage-common all 2.5-1 [6800 B] Get:55 http://ftpmaster.internal/ubuntu yakkety/main armhf libsemanage1 armhf 2.5-1 [69.3 kB] Get:56 http://ftpmaster.internal/ubuntu yakkety/main armhf libudev1 armhf 230-2git1 [53.8 kB] Get:57 http://ftpmaster.internal/ubuntu yakkety/main armhf libdevmapper1.02.1 armhf 2:1.02.124-1ubuntu1 [142 kB] Get:58 http://ftpmaster.internal/ubuntu yakkety/main armhf libusb-0.1-4 armhf 2:0.1.12-30 [15.6 kB] Get:59 http://ftpmaster.internal/ubuntu yakkety/main armhf libprocps5 armhf 2:3.3.11-3ubuntu1 [28.0 kB] Get:60 http://ftpmaster.internal/ubuntu yakkety/main armhf procps armhf 2:3.3.11-3ubuntu1 [215 kB] Get:61 http://ftpmaster.internal/ubuntu yakkety/main armhf tzdata all 2016d-2 [168 kB] Get:62 http://ftpmaster.internal/ubuntu yakkety/main armhf dmsetup armhf 2:1.02.124-1ubuntu1 [73.3 kB] Get:63 http://ftpmaster.internal/ubuntu yakkety/main armhf libtasn1-6 armhf 4.8-1 [36.9 kB] Get:64 http://ftpmaster.internal/ubuntu yakkety/main armhf libgnutls30 armhf 3.4.11-4ubuntu1 [486 kB] Get:65 http://ftpmaster.internal/ubuntu yakkety/main armhf libslang2 armhf 2.3.0-2.3ubuntu1 [375 kB] Get:66 http://ftpmaster.internal/ubuntu yakkety/main armhf libsqlite3-0 armhf 3.13.0-1 [406 kB] Get:67 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf apt-transport-https armhf 1.3~exp2 [23.6 kB] Get:68 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf libgssapi-krb5-2 armhf 1.14.2+dfsg-1 [99.1 kB] Get:69 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf libkrb5-3 armhf 1.14.2+dfsg-1 [230 kB] Get:70 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf libkrb5support0 armhf 1.14.2+dfsg-1 [27.7 kB] Get:71 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf libk5crypto3 armhf 1.14.2+dfsg-1 [77.5 kB] Get:72 http://ftpmaster.internal/ubuntu yakkety/main armhf libsasl2-modules-db armhf 2.1.26.dfsg1-15 [12.9 kB] Get:73 http://ftpmaster.internal/ubuntu yakkety/main armhf libsasl2-2 armhf 2.1.26.dfsg1-15 [42.0 kB] Get:74 http://ftpmaster.internal/ubuntu yakkety/main armhf libldap-2.4-2 armhf 2.4.42+dfsg-2ubuntu4 [138 kB] Get:75 http://ftpmaster.internal/ubuntu yakkety/main armhf libpng16-16 armhf 1.6.22-1 [159 kB] Get:76 http://ftpmaster.internal/ubuntu yakkety/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-1 [49.1 kB] Get:77 http://ftpmaster.internal/ubuntu yakkety/main armhf binutils armhf 2.26-11ubuntu2 [2345 kB] Get:78 http://ftpmaster.internal/ubuntu yakkety/main armhf libgomp1 armhf 6.1.1-6ubuntu11 [67.6 kB] Get:79 http://ftpmaster.internal/ubuntu yakkety/main armhf libatomic1 armhf 6.1.1-6ubuntu11 [6214 B] Get:80 http://ftpmaster.internal/ubuntu yakkety/main armhf libasan2 armhf 5.4.0-4ubuntu1 [240 kB] Get:81 http://ftpmaster.internal/ubuntu yakkety/main armhf libubsan0 armhf 6.1.1-6ubuntu11 [95.1 kB] Get:82 http://ftpmaster.internal/ubuntu yakkety/main armhf g++-5 armhf 5.4.0-4ubuntu1 [25.3 MB] Get:83 http://ftpmaster.internal/ubuntu yakkety/main armhf gcc-5 armhf 5.4.0-4ubuntu1 [5537 kB] Get:84 http://ftpmaster.internal/ubuntu yakkety/main armhf libstdc++-5-dev armhf 5.4.0-4ubuntu1 [1462 kB] Get:85 http://ftpmaster.internal/ubuntu yakkety/main armhf libgcc-5-dev armhf 5.4.0-4ubuntu1 [469 kB] Get:86 http://ftpmaster.internal/ubuntu yakkety/main armhf libcc1-0 armhf 6.1.1-6ubuntu11 [26.0 kB] Get:87 http://ftpmaster.internal/ubuntu yakkety/main armhf cpp-5 armhf 5.4.0-4ubuntu1 [23.7 MB] Get:88 http://ftpmaster.internal/ubuntu yakkety/main armhf gcc-5-base armhf 5.4.0-4ubuntu1 [16.8 kB] Get:89 http://ftpmaster.internal/ubuntu yakkety/main armhf libisl15 armhf 0.17.1-1 [418 kB] Get:90 http://ftpmaster.internal/ubuntu yakkety/main armhf libmpfr4 armhf 3.1.4-2 [170 kB] Get:91 http://ftpmaster.internal/ubuntu yakkety/main armhf dpkg-dev all 1.18.7ubuntu1 [666 kB] Get:92 http://ftpmaster.internal/ubuntu yakkety/main armhf libdpkg-perl all 1.18.7ubuntu1 [202 kB] Get:93 http://ftpmaster.internal/ubuntu yakkety/main armhf make armhf 4.1-9 [137 kB] Get:94 http://ftpmaster.internal/ubuntu yakkety/universe armhf libpng12-0 armhf 1.2.54-6ubuntu1 [106 kB] Get:95 http://ftpmaster.internal/ubuntu yakkety/main armhf linux-libc-dev armhf 4.4.0-25.44 [824 kB] Get:96 http://ftpmaster.internal/ubuntu yakkety/main armhf optipng armhf 0.7.6-1build1 [79.6 kB] Get:97 http://ftpmaster.internal/ubuntu yakkety/main armhf pkgbinarymangler all 130 [43.2 kB] Get:98 http://ftpmaster.internal/ubuntu yakkety/main armhf policyrcd-script-zg2 all 0.1-3 [5610 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 83.0 MB in 5s (15.9 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11908 files and directories currently installed.) Preparing to unpack .../base-files_9.6ubuntu2_armhf.deb ... Unpacking base-files (9.6ubuntu2) over (9.6ubuntu1) ... Setting up base-files (9.6ubuntu2) ... Installing new version of config file /etc/update-motd.d/10-help-text ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11908 files and directories currently installed.) Preparing to unpack .../bash_4.3-14ubuntu2_armhf.deb ... Unpacking bash (4.3-14ubuntu2) over (4.3-14ubuntu1) ... Setting up bash (4.3-14ubuntu2) ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11908 files and directories currently installed.) Preparing to unpack .../bsdutils_1%3a2.28-5ubuntu2_armhf.deb ... Unpacking bsdutils (1:2.28-5ubuntu2) over (1:2.27.1-6ubuntu3) ... Setting up bsdutils (1:2.28-5ubuntu2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11908 files and directories currently installed.) Preparing to unpack .../dpkg_1.18.7ubuntu1_armhf.deb ... Unpacking dpkg (1.18.7ubuntu1) over (1.18.4ubuntu1) ... Setting up dpkg (1.18.7ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11919 files and directories currently installed.) Preparing to unpack .../archives/grep_2.25-3_armhf.deb ... Unpacking grep (2.25-3) over (2.24-1) ... Setting up grep (2.25-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11919 files and directories currently installed.) Preparing to unpack .../hostname_3.17ubuntu1_armhf.deb ... Unpacking hostname (3.17ubuntu1) over (3.16ubuntu2) ... Setting up hostname (3.17ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11919 files and directories currently installed.) Preparing to unpack .../libsmartcols1_2.28-5ubuntu2_armhf.deb ... Unpacking libsmartcols1:armhf (2.28-5ubuntu2) over (2.27.1-6ubuntu3) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libsmartcols1:armhf (2.28-5ubuntu2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11919 files and directories currently installed.) Preparing to unpack .../libuuid1_2.28-5ubuntu2_armhf.deb ... Unpacking libuuid1:armhf (2.28-5ubuntu2) over (2.27.1-6ubuntu3) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libuuid1:armhf (2.28-5ubuntu2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11919 files and directories currently installed.) Preparing to unpack .../libblkid1_2.28-5ubuntu2_armhf.deb ... Unpacking libblkid1:armhf (2.28-5ubuntu2) over (2.27.1-6ubuntu3) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libblkid1:armhf (2.28-5ubuntu2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11919 files and directories currently installed.) Preparing to unpack .../libfdisk1_2.28-5ubuntu2_armhf.deb ... Unpacking libfdisk1:armhf (2.28-5ubuntu2) over (2.27.1-6ubuntu3) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libfdisk1:armhf (2.28-5ubuntu2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11919 files and directories currently installed.) Preparing to unpack .../insserv_1.14.0-5.3ubuntu1_armhf.deb ... Unpacking insserv (1.14.0-5.3ubuntu1) over (1.14.0-5ubuntu3) ... Preparing to unpack .../debconf_1.5.59ubuntu1_all.deb ... Unpacking debconf (1.5.59ubuntu1) over (1.5.58ubuntu1) ... Setting up debconf (1.5.59ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../sysv-rc_2.88dsf-59.6ubuntu1_all.deb ... Unpacking sysv-rc (2.88dsf-59.6ubuntu1) over (2.88dsf-59.3ubuntu2) ... Preparing to unpack .../libgpg-error0_1.22-2_armhf.deb ... Unpacking libgpg-error0:armhf (1.22-2) over (1.21-2ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libgpg-error0:armhf (1.22-2) ... Processing triggers for systemd (229-4ubuntu4) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../libgcrypt20_1.7.0-2_armhf.deb ... Unpacking libgcrypt20:armhf (1.7.0-2) over (1.6.5-2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libgcrypt20:armhf (1.7.0-2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../initscripts_2.88dsf-59.6ubuntu1_armhf.deb ... Unpacking initscripts (2.88dsf-59.6ubuntu1) over (2.88dsf-59.3ubuntu2) ... Preparing to unpack .../sysvinit-utils_2.88dsf-59.6ubuntu1_armhf.deb ... Unpacking sysvinit-utils (2.88dsf-59.6ubuntu1) over (2.88dsf-59.3ubuntu2) ... Preparing to unpack .../util-linux_2.28-5ubuntu2_armhf.deb ... Unpacking util-linux (2.28-5ubuntu2) over (2.27.1-6ubuntu3) ... Setting up util-linux (2.28-5ubuntu2) ... Processing triggers for systemd (229-4ubuntu4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11925 files and directories currently installed.) Preparing to unpack .../init-system-helpers_1.34ubuntu1_all.deb ... Unpacking init-system-helpers (1.34ubuntu1) over (1.29ubuntu1) ... Setting up init-system-helpers (1.34ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11925 files and directories currently installed.) Preparing to unpack .../libsystemd0_230-2git1_armhf.deb ... Unpacking libsystemd0:armhf (230-2git1) over (229-4ubuntu4) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libsystemd0:armhf (230-2git1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11925 files and directories currently installed.) Preparing to unpack .../systemd_230-2git1_armhf.deb ... Unpacking systemd (230-2git1) over (229-4ubuntu4) ... Setting up systemd (230-2git1) ... Installing new version of config file /etc/dbus-1/system.d/org.freedesktop.login1.conf ... Installing new version of config file /etc/dbus-1/system.d/org.freedesktop.systemd1.conf ... Installing new version of config file /etc/pam.d/systemd-user ... Installing new version of config file /etc/systemd/journald.conf ... Installing new version of config file /etc/systemd/logind.conf ... Installing new version of config file /etc/systemd/system.conf ... Installing new version of config file /etc/systemd/user.conf ... addgroup: The group `systemd-journal' already exists as a system group. Exiting. Removing obsolete conffile /etc/systemd/bootchart.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../perl_5.22.2-1_armhf.deb ... Unpacking perl (5.22.2-1) over (5.22.1-9) ... Preparing to unpack .../perl-modules-5.22_5.22.2-1_all.deb ... Unpacking perl-modules-5.22 (5.22.2-1) over (5.22.1-9) ... Preparing to unpack .../libperl5.22_5.22.2-1_armhf.deb ... Unpacking libperl5.22:armhf (5.22.2-1) over (5.22.1-9) ... Preparing to unpack .../perl-base_5.22.2-1_armhf.deb ... Unpacking perl-base (5.22.2-1) over (5.22.1-9) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up perl-base (5.22.2-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../bzip2_1.0.6-8build1_armhf.deb ... Unpacking bzip2 (1.0.6-8build1) over (1.0.6-8) ... Preparing to unpack .../libbz2-1.0_1.0.6-8build1_armhf.deb ... Unpacking libbz2-1.0:armhf (1.0.6-8build1) over (1.0.6-8) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libbz2-1.0:armhf (1.0.6-8build1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../libgdbm3_1.8.3-14_armhf.deb ... Unpacking libgdbm3:armhf (1.8.3-14) over (1.8.3-13.1) ... Preparing to unpack .../zlib1g_1%3a1.2.8.dfsg-2ubuntu5_armhf.deb ... Unpacking zlib1g:armhf (1:1.2.8.dfsg-2ubuntu5) over (1:1.2.8.dfsg-2ubuntu4) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up zlib1g:armhf (1:1.2.8.dfsg-2ubuntu5) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../libcap2_1%3a2.25-1_armhf.deb ... Unpacking libcap2:armhf (1:2.25-1) over (1:2.24-12) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libcap2:armhf (1:2.25-1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../libselinux1_2.5-3_armhf.deb ... Unpacking libselinux1:armhf (2.5-3) over (2.4-3build2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libselinux1:armhf (2.5-3) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../libmount1_2.28-5ubuntu2_armhf.deb ... Unpacking libmount1:armhf (2.28-5ubuntu2) over (2.27.1-6ubuntu3) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libmount1:armhf (2.28-5ubuntu2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../libseccomp2_2.3.1-2ubuntu2_armhf.deb ... Unpacking libseccomp2:armhf (2.3.1-2ubuntu2) over (2.2.3-3ubuntu3) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libseccomp2:armhf (2.3.1-2ubuntu2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11920 files and directories currently installed.) Preparing to unpack .../libcap2-bin_1%3a2.25-1_armhf.deb ... Unpacking libcap2-bin (1:2.25-1) over (1:2.24-12) ... Setting up libcap2-bin (1:2.25-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11921 files and directories currently installed.) Preparing to unpack .../lsb-base_9.20160110ubuntu1_all.deb ... Unpacking lsb-base (9.20160110ubuntu1) over (9.20160110) ... Setting up lsb-base (9.20160110ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11921 files and directories currently installed.) Preparing to unpack .../mount_2.28-5ubuntu2_armhf.deb ... Unpacking mount (2.28-5ubuntu2) over (2.27.1-6ubuntu3) ... Setting up mount (2.28-5ubuntu2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../ncurses-bin_6.0+20160319-1ubuntu1_armhf.deb ... Unpacking ncurses-bin (6.0+20160319-1ubuntu1) over (6.0+20160213-1ubuntu1) ... Setting up ncurses-bin (6.0+20160319-1ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../sed_4.2.2-7.1_armhf.deb ... Unpacking sed (4.2.2-7.1) over (4.2.2-7) ... Setting up sed (4.2.2-7.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../archives/tar_1.29-1_armhf.deb ... Unpacking tar (1.29-1) over (1.28-2.1) ... Setting up tar (1.29-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../init_1.34ubuntu1_armhf.deb ... Unpacking init (1.34ubuntu1) over (1.29ubuntu1) ... Setting up init (1.34ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../ncurses-base_6.0+20160319-1ubuntu1_all.deb ... Unpacking ncurses-base (6.0+20160319-1ubuntu1) over (6.0+20160213-1ubuntu1) ... Setting up ncurses-base (6.0+20160319-1ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../gcc-6-base_6.1.1-6ubuntu11_armhf.deb ... Unpacking gcc-6-base:armhf (6.1.1-6ubuntu11) over (6.0.1-0ubuntu1) ... Setting up gcc-6-base:armhf (6.1.1-6ubuntu11) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libgcc1_1%3a6.1.1-6ubuntu11_armhf.deb ... Unpacking libgcc1:armhf (1:6.1.1-6ubuntu11) over (1:6.0.1-0ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libgcc1:armhf (1:6.1.1-6ubuntu11) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libstdc++6_6.1.1-6ubuntu11_armhf.deb ... Unpacking libstdc++6:armhf (6.1.1-6ubuntu11) over (5.3.1-14ubuntu2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libstdc++6:armhf (6.1.1-6ubuntu11) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libapt-pkg5.0_1.3~exp2_armhf.deb ... Unpacking libapt-pkg5.0:armhf (1.3~exp2) over (1.2.10ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libapt-pkg5.0:armhf (1.3~exp2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../ubuntu-keyring_2016.05.13_all.deb ... Unpacking ubuntu-keyring (2016.05.13) over (2012.05.19) ... Setting up ubuntu-keyring (2016.05.13) ... gpg: key 437D05B5: "Ubuntu Archive Automatic Signing Key " not changed gpg: key FBB75451: "Ubuntu CD Image Automatic Signing Key " not changed gpg: key C0B21F32: "Ubuntu Archive Automatic Signing Key (2012) " not changed gpg: key EFE21092: "Ubuntu CD Image Automatic Signing Key (2012) " not changed gpg: Total number processed: 4 gpg: unchanged: 4 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../apt_1.3~exp2_armhf.deb ... Unpacking apt (1.3~exp2) over (1.2.10ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up apt (1.3~exp2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../systemd-sysv_230-2git1_armhf.deb ... Unpacking systemd-sysv (230-2git1) over (229-4ubuntu4) ... Setting up systemd-sysv (230-2git1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libdebconfclient0_0.213ubuntu1_armhf.deb ... Unpacking libdebconfclient0:armhf (0.213ubuntu1) over (0.198ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libdebconfclient0:armhf (0.213ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libncurses5_6.0+20160319-1ubuntu1_armhf.deb ... Unpacking libncurses5:armhf (6.0+20160319-1ubuntu1) over (6.0+20160213-1ubuntu1) ... Preparing to unpack .../libtinfo5_6.0+20160319-1ubuntu1_armhf.deb ... Unpacking libtinfo5:armhf (6.0+20160319-1ubuntu1) over (6.0+20160213-1ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libtinfo5:armhf (6.0+20160319-1ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libncursesw5_6.0+20160319-1ubuntu1_armhf.deb ... Unpacking libncursesw5:armhf (6.0+20160319-1ubuntu1) over (6.0+20160213-1ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libncursesw5:armhf (6.0+20160319-1ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libsepol1_2.5-1_armhf.deb ... Unpacking libsepol1:armhf (2.5-1) over (2.4-2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libsepol1:armhf (2.5-1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libsemanage-common_2.5-1_all.deb ... Unpacking libsemanage-common (2.5-1) over (2.3-1build3) ... Setting up libsemanage-common (2.5-1) ... Installing new version of config file /etc/selinux/semanage.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libsemanage1_2.5-1_armhf.deb ... Unpacking libsemanage1:armhf (2.5-1) over (2.3-1build3) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libsemanage1:armhf (2.5-1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libudev1_230-2git1_armhf.deb ... Unpacking libudev1:armhf (230-2git1) over (229-4ubuntu4) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libudev1:armhf (230-2git1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libdevmapper1.02.1_2%3a1.02.124-1ubuntu1_armhf.deb ... Unpacking libdevmapper1.02.1:armhf (2:1.02.124-1ubuntu1) over (2:1.02.110-1ubuntu10) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libdevmapper1.02.1:armhf (2:1.02.124-1ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libusb-0.1-4_2%3a0.1.12-30_armhf.deb ... Unpacking libusb-0.1-4:armhf (2:0.1.12-30) over (2:0.1.12-28) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libusb-0.1-4:armhf (2:0.1.12-30) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Selecting previously unselected package libprocps5:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11924 files and directories currently installed.) Preparing to unpack .../libprocps5_2%3a3.3.11-3ubuntu1_armhf.deb ... Unpacking libprocps5:armhf (2:3.3.11-3ubuntu1) ... Preparing to unpack .../procps_2%3a3.3.11-3ubuntu1_armhf.deb ... Running in chroot, ignoring request. invoke-rc.d: policy-rc.d denied execution of stop. Unpacking procps (2:3.3.11-3ubuntu1) over (2:3.3.10-4ubuntu2) ... Preparing to unpack .../tzdata_2016d-2_all.deb ... Unpacking tzdata (2016d-2) over (2016d-0ubuntu0.16.04) ... Preparing to unpack .../dmsetup_2%3a1.02.124-1ubuntu1_armhf.deb ... Unpacking dmsetup (2:1.02.124-1ubuntu1) over (2:1.02.110-1ubuntu10) ... Preparing to unpack .../libtasn1-6_4.8-1_armhf.deb ... Unpacking libtasn1-6:armhf (4.8-1) over (4.7-3) ... Preparing to unpack .../libgnutls30_3.4.11-4ubuntu1_armhf.deb ... Unpacking libgnutls30:armhf (3.4.11-4ubuntu1) over (3.4.10-4ubuntu1) ... Preparing to unpack .../libslang2_2.3.0-2.3ubuntu1_armhf.deb ... Unpacking libslang2:armhf (2.3.0-2.3ubuntu1) over (2.3.0-2ubuntu1) ... Preparing to unpack .../libsqlite3-0_3.13.0-1_armhf.deb ... Unpacking libsqlite3-0:armhf (3.13.0-1) over (3.11.0-1ubuntu1) ... Preparing to unpack .../apt-transport-https_1.3~exp2_armhf.deb ... Unpacking apt-transport-https (1.3~exp2) over (1.2.10ubuntu1) ... Preparing to unpack .../libgssapi-krb5-2_1.14.2+dfsg-1_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.14.2+dfsg-1) over (1.13.2+dfsg-5) ... Preparing to unpack .../libkrb5-3_1.14.2+dfsg-1_armhf.deb ... Unpacking libkrb5-3:armhf (1.14.2+dfsg-1) over (1.13.2+dfsg-5) ... Preparing to unpack .../libkrb5support0_1.14.2+dfsg-1_armhf.deb ... Unpacking libkrb5support0:armhf (1.14.2+dfsg-1) over (1.13.2+dfsg-5) ... Preparing to unpack .../libk5crypto3_1.14.2+dfsg-1_armhf.deb ... Unpacking libk5crypto3:armhf (1.14.2+dfsg-1) over (1.13.2+dfsg-5) ... Preparing to unpack .../libsasl2-modules-db_2.1.26.dfsg1-15_armhf.deb ... Unpacking libsasl2-modules-db:armhf (2.1.26.dfsg1-15) over (2.1.26.dfsg1-14build1) ... Preparing to unpack .../libsasl2-2_2.1.26.dfsg1-15_armhf.deb ... Unpacking libsasl2-2:armhf (2.1.26.dfsg1-15) over (2.1.26.dfsg1-14build1) ... Preparing to unpack .../libldap-2.4-2_2.4.42+dfsg-2ubuntu4_armhf.deb ... Unpacking libldap-2.4-2:armhf (2.4.42+dfsg-2ubuntu4) over (2.4.42+dfsg-2ubuntu3) ... Selecting previously unselected package libpng16-16:armhf. Preparing to unpack .../libpng16-16_1.6.22-1_armhf.deb ... Unpacking libpng16-16:armhf (1.6.22-1) ... Preparing to unpack .../librtmp1_2.4+20151223.gitfa8646d.1-1_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-1) over (2.4+20151223.gitfa8646d-1build1) ... Preparing to unpack .../binutils_2.26-11ubuntu2_armhf.deb ... Unpacking binutils (2.26-11ubuntu2) over (2.26-8ubuntu2) ... Preparing to unpack .../libgomp1_6.1.1-6ubuntu11_armhf.deb ... Unpacking libgomp1:armhf (6.1.1-6ubuntu11) over (5.3.1-14ubuntu2) ... Preparing to unpack .../libatomic1_6.1.1-6ubuntu11_armhf.deb ... Unpacking libatomic1:armhf (6.1.1-6ubuntu11) over (5.3.1-14ubuntu2) ... Preparing to unpack .../libasan2_5.4.0-4ubuntu1_armhf.deb ... Unpacking libasan2:armhf (5.4.0-4ubuntu1) over (5.3.1-14ubuntu2) ... Preparing to unpack .../libubsan0_6.1.1-6ubuntu11_armhf.deb ... Unpacking libubsan0:armhf (6.1.1-6ubuntu11) over (5.3.1-14ubuntu2) ... Preparing to unpack .../g++-5_5.4.0-4ubuntu1_armhf.deb ... Unpacking g++-5 (5.4.0-4ubuntu1) over (5.3.1-14ubuntu2) ... Preparing to unpack .../gcc-5_5.4.0-4ubuntu1_armhf.deb ... Unpacking gcc-5 (5.4.0-4ubuntu1) over (5.3.1-14ubuntu2) ... Preparing to unpack .../libstdc++-5-dev_5.4.0-4ubuntu1_armhf.deb ... Unpacking libstdc++-5-dev:armhf (5.4.0-4ubuntu1) over (5.3.1-14ubuntu2) ... Preparing to unpack .../libgcc-5-dev_5.4.0-4ubuntu1_armhf.deb ... Unpacking libgcc-5-dev:armhf (5.4.0-4ubuntu1) over (5.3.1-14ubuntu2) ... Preparing to unpack .../libcc1-0_6.1.1-6ubuntu11_armhf.deb ... Unpacking libcc1-0:armhf (6.1.1-6ubuntu11) over (5.3.1-14ubuntu2) ... Preparing to unpack .../cpp-5_5.4.0-4ubuntu1_armhf.deb ... Unpacking cpp-5 (5.4.0-4ubuntu1) over (5.3.1-14ubuntu2) ... Preparing to unpack .../gcc-5-base_5.4.0-4ubuntu1_armhf.deb ... Unpacking gcc-5-base:armhf (5.4.0-4ubuntu1) over (5.3.1-14ubuntu2) ... Preparing to unpack .../libisl15_0.17.1-1_armhf.deb ... Unpacking libisl15:armhf (0.17.1-1) over (0.16.1-1) ... Preparing to unpack .../libmpfr4_3.1.4-2_armhf.deb ... Unpacking libmpfr4:armhf (3.1.4-2) over (3.1.4-1) ... Preparing to unpack .../dpkg-dev_1.18.7ubuntu1_all.deb ... Unpacking dpkg-dev (1.18.7ubuntu1) over (1.18.4ubuntu1) ... Preparing to unpack .../libdpkg-perl_1.18.7ubuntu1_all.deb ... Unpacking libdpkg-perl (1.18.7ubuntu1) over (1.18.4ubuntu1) ... Preparing to unpack .../archives/make_4.1-9_armhf.deb ... Unpacking make (4.1-9) over (4.1-6) ... Preparing to unpack .../libpng12-0_1.2.54-6ubuntu1_armhf.deb ... Unpacking libpng12-0:armhf (1.2.54-6ubuntu1) over (1.2.54-1ubuntu1) ... Preparing to unpack .../linux-libc-dev_4.4.0-25.44_armhf.deb ... Unpacking linux-libc-dev:armhf (4.4.0-25.44) over (4.4.0-21.37) ... Preparing to unpack .../optipng_0.7.6-1build1_armhf.deb ... Unpacking optipng (0.7.6-1build1) over (0.7.6-1) ... Preparing to unpack .../pkgbinarymangler_130_all.deb ... Unpacking pkgbinarymangler (130) over (129) ... Preparing to unpack .../policyrcd-script-zg2_0.1-3_all.deb ... Unpacking policyrcd-script-zg2 (0.1-3) over (0.1-2) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Processing triggers for systemd (230-2git1) ... Setting up insserv (1.14.0-5.3ubuntu1) ... Setting up sysvinit-utils (2.88dsf-59.6ubuntu1) ... Setting up sysv-rc (2.88dsf-59.6ubuntu1) ... Setting up initscripts (2.88dsf-59.6ubuntu1) ... Installing new version of config file /etc/init.d/ondemand ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountroot ... Setting up perl-modules-5.22 (5.22.2-1) ... Setting up libgdbm3:armhf (1.8.3-14) ... Setting up libperl5.22:armhf (5.22.2-1) ... Setting up perl (5.22.2-1) ... Setting up bzip2 (1.0.6-8build1) ... Setting up libncurses5:armhf (6.0+20160319-1ubuntu1) ... Setting up libprocps5:armhf (2:3.3.11-3ubuntu1) ... Setting up procps (2:3.3.11-3ubuntu1) ... Installing new version of config file /etc/sysctl.conf ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults Running in chroot, ignoring request. invoke-rc.d: policy-rc.d denied execution of start. Setting up tzdata (2016d-2) ... Current default time zone: 'Etc/UTC' Local time is now: Wed Jun 15 12:30:49 UTC 2016. Universal Time is now: Wed Jun 15 12:30:49 UTC 2016. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up dmsetup (2:1.02.124-1ubuntu1) ... Setting up libtasn1-6:armhf (4.8-1) ... Setting up libgnutls30:armhf (3.4.11-4ubuntu1) ... Setting up libslang2:armhf (2.3.0-2.3ubuntu1) ... Setting up libsqlite3-0:armhf (3.13.0-1) ... Setting up apt-transport-https (1.3~exp2) ... Setting up libkrb5support0:armhf (1.14.2+dfsg-1) ... Setting up libk5crypto3:armhf (1.14.2+dfsg-1) ... Setting up libkrb5-3:armhf (1.14.2+dfsg-1) ... Setting up libgssapi-krb5-2:armhf (1.14.2+dfsg-1) ... Setting up libsasl2-modules-db:armhf (2.1.26.dfsg1-15) ... Setting up libsasl2-2:armhf (2.1.26.dfsg1-15) ... Setting up libldap-2.4-2:armhf (2.4.42+dfsg-2ubuntu4) ... Setting up libpng16-16:armhf (1.6.22-1) ... Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-1) ... Setting up binutils (2.26-11ubuntu2) ... Setting up libgomp1:armhf (6.1.1-6ubuntu11) ... Setting up libatomic1:armhf (6.1.1-6ubuntu11) ... Setting up gcc-5-base:armhf (5.4.0-4ubuntu1) ... Setting up libasan2:armhf (5.4.0-4ubuntu1) ... Setting up libubsan0:armhf (6.1.1-6ubuntu11) ... Setting up libisl15:armhf (0.17.1-1) ... Setting up libmpfr4:armhf (3.1.4-2) ... Setting up cpp-5 (5.4.0-4ubuntu1) ... Setting up libcc1-0:armhf (6.1.1-6ubuntu11) ... Setting up libgcc-5-dev:armhf (5.4.0-4ubuntu1) ... Setting up gcc-5 (5.4.0-4ubuntu1) ... Setting up libstdc++-5-dev:armhf (5.4.0-4ubuntu1) ... Setting up g++-5 (5.4.0-4ubuntu1) ... Setting up libdpkg-perl (1.18.7ubuntu1) ... Setting up make (4.1-9) ... Setting up dpkg-dev (1.18.7ubuntu1) ... Setting up libpng12-0:armhf (1.2.54-6ubuntu1) ... Setting up linux-libc-dev:armhf (4.4.0-25.44) ... Setting up optipng (0.7.6-1build1) ... Setting up pkgbinarymangler (130) ... Setting up policyrcd-script-zg2 (0.1-3) ... Processing triggers for systemd (230-2git1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', 'PACKAGEBUILD-10022900', 'armhf', 'yakkety-proposed', '-c', 'chroot:autobuild', '--arch=armhf', '--dist=yakkety-proposed', '--purge=never', '--nolog', 'kexec-tools_2.0.10-2ubuntu1.dsc'] Initiating build PACKAGEBUILD-10022900 with 4 jobs across 4 processor cores. Kernel reported to sbuild: 3.2.0-98-highbank #138-Ubuntu SMP PREEMPT Mon Jan 11 13:24:41 UTC 2016 armv7l sbuild (Debian sbuild) 0.65.2 (24 Mar 2015) on kishi02.buildd ╔══════════════════════════════════════════════════════════════════════════════╗ ║ kexec-tools 1:2.0.10-2ubuntu1 (armhf) 15 Jun 2016 12:30 ║ ╚══════════════════════════════════════════════════════════════════════════════╝ Package: kexec-tools Version: 1:2.0.10-2ubuntu1 Source Version: 1:2.0.10-2ubuntu1 Distribution: yakkety-proposed Machine Architecture: armhf Host Architecture: armhf Build Architecture: armhf I: NOTICE: Log filtering will replace 'build/kexec-tools-0U0WEv/kexec-tools-2.0.10' with '«PKGBUILDDIR»' I: NOTICE: Log filtering will replace 'build/kexec-tools-0U0WEv' with '«BUILDDIR»' I: NOTICE: Log filtering will replace 'home/buildd/build-PACKAGEBUILD-10022900/chroot-autobuild' with '«CHROOT»' ┌──────────────────────────────────────────────────────────────────────────────┐ │ Fetch source files │ └──────────────────────────────────────────────────────────────────────────────┘ Local sources ───────────── kexec-tools_2.0.10-2ubuntu1.dsc exists in .; copying to chroot Check architectures ─────────────────── Check dependencies ────────────────── Merged Build-Depends: build-essential, fakeroot Filtered Build-Depends: build-essential, fakeroot dpkg-deb: building package 'sbuild-build-depends-core-dummy' in '/«BUILDDIR»/resolver-HZllP5/apt_archive/sbuild-build-depends-core-dummy.deb'. Ign:1 copy:/«BUILDDIR»/resolver-HZllP5/apt_archive ./ InRelease Get:2 copy:/«BUILDDIR»/resolver-HZllP5/apt_archive ./ Release [2119 B] Ign:3 copy:/«BUILDDIR»/resolver-HZllP5/apt_archive ./ Release.gpg Get:4 copy:/«BUILDDIR»/resolver-HZllP5/apt_archive ./ Sources [208 B] Get:5 copy:/«BUILDDIR»/resolver-HZllP5/apt_archive ./ Packages [528 B] Fetched 2855 B in 0s (97.5 kB/s) Reading package lists... W: The repository 'copy:/«BUILDDIR»/resolver-HZllP5/apt_archive ./ Release' is not signed. Reading package lists... ┌──────────────────────────────────────────────────────────────────────────────┐ │ Install core build dependencies (apt-based resolver) │ └──────────────────────────────────────────────────────────────────────────────┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: libprocps4 Use 'sudo apt autoremove' to remove it. The following NEW packages will be installed: sbuild-build-depends-core-dummy 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 772 B of archives. After this operation, 0 B of additional disk space will be used. WARNING: The following packages cannot be authenticated! sbuild-build-depends-core-dummy Authentication warning overridden. Get:1 copy:/«BUILDDIR»/resolver-HZllP5/apt_archive ./ sbuild-build-depends-core-dummy 0.invalid.0 [772 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 772 B in 0s (0 B/s) Selecting previously unselected package sbuild-build-depends-core-dummy. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11972 files and directories currently installed.) Preparing to unpack .../sbuild-build-depends-core-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ... Setting up sbuild-build-depends-core-dummy (0.invalid.0) ... Merged Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, init, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, tar, util-linux, libc6-dev | libc-dev, gcc (>= 4:5.2), g++ (>= 4:5.2), make, dpkg-dev (>= 1.17.11), debhelper (>= 7.0.0), dh-autoreconf, po-debconf Filtered Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, init, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, tar, util-linux, libc6-dev | libc-dev, gcc (>= 4:5.2), g++ (>= 4:5.2), make, dpkg-dev (>= 1.17.11), debhelper (>= 7.0.0), dh-autoreconf, po-debconf dpkg-deb: building package 'sbuild-build-depends-kexec-tools-dummy' in '/«BUILDDIR»/resolver-GN_bQ6/apt_archive/sbuild-build-depends-kexec-tools-dummy.deb'. Ign:1 copy:/«BUILDDIR»/resolver-GN_bQ6/apt_archive ./ InRelease Get:2 copy:/«BUILDDIR»/resolver-GN_bQ6/apt_archive ./ Release [2119 B] Ign:3 copy:/«BUILDDIR»/resolver-GN_bQ6/apt_archive ./ Release.gpg Get:4 copy:/«BUILDDIR»/resolver-GN_bQ6/apt_archive ./ Sources [461 B] Get:5 copy:/«BUILDDIR»/resolver-GN_bQ6/apt_archive ./ Packages [703 B] Fetched 3283 B in 0s (112 kB/s) Reading package lists... W: The repository 'copy:/«BUILDDIR»/resolver-GN_bQ6/apt_archive ./ Release' is not signed. Reading package lists... ┌──────────────────────────────────────────────────────────────────────────────┐ │ Install kexec-tools build dependencies (apt-based resolver) │ └──────────────────────────────────────────────────────────────────────────────┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: libprocps4 Use 'sudo apt autoremove' to remove it. The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasprintf0v5 libcroco3 libfile-stripnondeterminism-perl libglib2.0-0 libicu57 libmagic1 libpipeline1 libsigsegv2 libtimedate-perl libtool libunistring0 libxml2 m4 man-db po-debconf Suggested packages: autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois vacation dh-make gettext-doc groff libtool-doc gfortran | fortran95-compiler gcj-jdk less www-browser libmail-box-perl Recommended packages: curl | wget | lynx-cur libasprintf-dev libgettextpo-dev libglib2.0-data shared-mime-info xdg-user-dirs libltdl-dev xml-core libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasprintf0v5 libcroco3 libfile-stripnondeterminism-perl libglib2.0-0 libicu57 libmagic1 libpipeline1 libsigsegv2 libtimedate-perl libtool libunistring0 libxml2 m4 man-db po-debconf sbuild-build-depends-kexec-tools-dummy 0 upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 15.5 MB of archives. After this operation, 56.9 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! sbuild-build-depends-kexec-tools-dummy Authentication warning overridden. Get:1 copy:/«BUILDDIR»/resolver-GN_bQ6/apt_archive ./ sbuild-build-depends-kexec-tools-dummy 0.invalid.0 [946 B] Get:2 http://ftpmaster.internal/ubuntu yakkety/main armhf groff-base armhf 1.22.3-7 [1023 kB] Get:3 http://ftpmaster.internal/ubuntu yakkety/main armhf bsdmainutils armhf 9.0.6ubuntu3 [169 kB] Get:4 http://ftpmaster.internal/ubuntu yakkety/main armhf libpipeline1 armhf 1.4.1-2 [21.0 kB] Get:5 http://ftpmaster.internal/ubuntu yakkety/main armhf man-db armhf 2.7.5-1 [836 kB] Get:6 http://ftpmaster.internal/ubuntu yakkety/main armhf libunistring0 armhf 0.9.3-5.2ubuntu1 [250 kB] Get:7 http://ftpmaster.internal/ubuntu yakkety/main armhf libmagic1 armhf 1:5.25-2ubuntu1 [211 kB] Get:8 http://ftpmaster.internal/ubuntu yakkety/main armhf file armhf 1:5.25-2ubuntu1 [20.9 kB] Get:9 http://ftpmaster.internal/ubuntu yakkety/main armhf libasprintf0v5 armhf 0.19.7-2ubuntu3 [6158 B] Get:10 http://ftpmaster.internal/ubuntu yakkety/main armhf gettext-base armhf 0.19.7-2ubuntu3 [44.5 kB] Get:11 http://ftpmaster.internal/ubuntu yakkety/main armhf libglib2.0-0 armhf 2.48.1-1 [977 kB] Get:12 http://ftpmaster.internal/ubuntu yakkety/main armhf libicu57 armhf 57.1-1 [7424 kB] Get:13 http://ftpmaster.internal/ubuntu yakkety/main armhf libxml2 armhf 2.9.3+dfsg1-1.2 [602 kB] Get:14 http://ftpmaster.internal/ubuntu yakkety/main armhf libsigsegv2 armhf 2.10-5 [13.3 kB] Get:15 http://ftpmaster.internal/ubuntu yakkety/main armhf m4 armhf 1.4.17-5 [179 kB] Get:16 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf autoconf all 2.69-10 [321 kB] Get:17 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf autotools-dev all 20160430.1 [39.6 kB] Get:18 http://ftpmaster.internal/ubuntu yakkety/main armhf automake all 1:1.15-4ubuntu1 [510 kB] Get:19 http://ftpmaster.internal/ubuntu yakkety/main armhf autopoint all 0.19.7-2ubuntu3 [406 kB] Get:20 http://ftpmaster.internal/ubuntu yakkety/main armhf libcroco3 armhf 0.6.11-1 [70.0 kB] Get:21 http://ftpmaster.internal/ubuntu yakkety/main armhf gettext armhf 0.19.7-2ubuntu3 [1013 kB] Get:22 http://ftpmaster.internal/ubuntu yakkety/main armhf intltool-debian all 0.35.0+20060710.4 [24.9 kB] Get:23 http://ftpmaster.internal/ubuntu yakkety/main armhf po-debconf all 1.0.19 [234 kB] Get:24 http://ftpmaster.internal/ubuntu yakkety/main armhf libarchive-zip-perl all 1.57-1 [84.0 kB] Get:25 http://ftpmaster.internal/ubuntu yakkety/main armhf libfile-stripnondeterminism-perl all 0.019-1 [11.1 kB] Get:26 http://ftpmaster.internal/ubuntu yakkety/main armhf libtimedate-perl all 2.3000-2 [37.5 kB] Get:27 http://ftpmaster.internal/ubuntu yakkety/main armhf dh-strip-nondeterminism all 0.019-1 [4858 B] Get:28 http://ftpmaster.internal/ubuntu yakkety/main armhf libtool all 2.4.6-0.1 [193 kB] Get:29 http://ftpmaster.internal/ubuntu yakkety/main armhf dh-autoreconf all 12 [15.8 kB] Get:30 http://ftpmaster.internal/ubuntu yakkety/main armhf debhelper all 9.20160403ubuntu1 [711 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 15.5 MB in 0s (15.8 MB/s) Selecting previously unselected package groff-base. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11972 files and directories currently installed.) Preparing to unpack .../groff-base_1.22.3-7_armhf.deb ... Unpacking groff-base (1.22.3-7) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../bsdmainutils_9.0.6ubuntu3_armhf.deb ... Unpacking bsdmainutils (9.0.6ubuntu3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../libpipeline1_1.4.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.4.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../man-db_2.7.5-1_armhf.deb ... Unpacking man-db (2.7.5-1) ... Selecting previously unselected package libunistring0:armhf. Preparing to unpack .../libunistring0_0.9.3-5.2ubuntu1_armhf.deb ... Unpacking libunistring0:armhf (0.9.3-5.2ubuntu1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../libmagic1_1%3a5.25-2ubuntu1_armhf.deb ... Unpacking libmagic1:armhf (1:5.25-2ubuntu1) ... Selecting previously unselected package file. Preparing to unpack .../file_1%3a5.25-2ubuntu1_armhf.deb ... Unpacking file (1:5.25-2ubuntu1) ... Selecting previously unselected package libasprintf0v5:armhf. Preparing to unpack .../libasprintf0v5_0.19.7-2ubuntu3_armhf.deb ... Unpacking libasprintf0v5:armhf (0.19.7-2ubuntu3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../gettext-base_0.19.7-2ubuntu3_armhf.deb ... Unpacking gettext-base (0.19.7-2ubuntu3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../libglib2.0-0_2.48.1-1_armhf.deb ... Unpacking libglib2.0-0:armhf (2.48.1-1) ... Selecting previously unselected package libicu57:armhf. Preparing to unpack .../libicu57_57.1-1_armhf.deb ... Unpacking libicu57:armhf (57.1-1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../libxml2_2.9.3+dfsg1-1.2_armhf.deb ... Unpacking libxml2:armhf (2.9.3+dfsg1-1.2) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../libsigsegv2_2.10-5_armhf.deb ... Unpacking libsigsegv2:armhf (2.10-5) ... Selecting previously unselected package m4. Preparing to unpack .../archives/m4_1.4.17-5_armhf.deb ... Unpacking m4 (1.4.17-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../autoconf_2.69-10_all.deb ... Unpacking autoconf (2.69-10) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../autotools-dev_20160430.1_all.deb ... Unpacking autotools-dev (20160430.1) ... Selecting previously unselected package automake. Preparing to unpack .../automake_1%3a1.15-4ubuntu1_all.deb ... Unpacking automake (1:1.15-4ubuntu1) ... Selecting previously unselected package autopoint. Preparing to unpack .../autopoint_0.19.7-2ubuntu3_all.deb ... Unpacking autopoint (0.19.7-2ubuntu3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../libcroco3_0.6.11-1_armhf.deb ... Unpacking libcroco3:armhf (0.6.11-1) ... Selecting previously unselected package gettext. Preparing to unpack .../gettext_0.19.7-2ubuntu3_armhf.deb ... Unpacking gettext (0.19.7-2ubuntu3) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../intltool-debian_0.35.0+20060710.4_all.deb ... Unpacking intltool-debian (0.35.0+20060710.4) ... Selecting previously unselected package po-debconf. Preparing to unpack .../po-debconf_1.0.19_all.deb ... Unpacking po-debconf (1.0.19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../libarchive-zip-perl_1.57-1_all.deb ... Unpacking libarchive-zip-perl (1.57-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../libfile-stripnondeterminism-perl_0.019-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (0.019-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../libtimedate-perl_2.3000-2_all.deb ... Unpacking libtimedate-perl (2.3000-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../dh-strip-nondeterminism_0.019-1_all.deb ... Unpacking dh-strip-nondeterminism (0.019-1) ... Selecting previously unselected package libtool. Preparing to unpack .../libtool_2.4.6-0.1_all.deb ... Unpacking libtool (2.4.6-0.1) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../dh-autoreconf_12_all.deb ... Unpacking dh-autoreconf (12) ... Selecting previously unselected package debhelper. Preparing to unpack .../debhelper_9.20160403ubuntu1_all.deb ... Unpacking debhelper (9.20160403ubuntu1) ... Selecting previously unselected package sbuild-build-depends-kexec-tools-dummy. Preparing to unpack .../sbuild-build-depends-kexec-tools-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-kexec-tools-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libarchive-zip-perl (1.57-1) ... Setting up libtimedate-perl (2.3000-2) ... Setting up libsigsegv2:armhf (2.10-5) ... Setting up groff-base (1.22.3-7) ... Setting up libglib2.0-0:armhf (2.48.1-1) ... No schema files found: doing nothing. Setting up libpipeline1:armhf (1.4.1-2) ... Setting up m4 (1.4.17-5) ... Setting up libicu57:armhf (57.1-1) ... Setting up libxml2:armhf (2.9.3+dfsg1-1.2) ... Setting up libmagic1:armhf (1:5.25-2ubuntu1) ... Setting up libcroco3:armhf (0.6.11-1) ... Setting up autotools-dev (20160430.1) ... Setting up libunistring0:armhf (0.9.3-5.2ubuntu1) ... Setting up libasprintf0v5:armhf (0.19.7-2ubuntu3) ... Setting up bsdmainutils (9.0.6ubuntu3) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up autopoint (0.19.7-2ubuntu3) ... Setting up libfile-stripnondeterminism-perl (0.019-1) ... Setting up gettext-base (0.19.7-2ubuntu3) ... Setting up autoconf (2.69-10) ... Setting up file (1:5.25-2ubuntu1) ... Setting up automake (1:1.15-4ubuntu1) ... update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode Setting up man-db (2.7.5-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libtool (2.4.6-0.1) ... Setting up gettext (0.19.7-2ubuntu3) ... Setting up intltool-debian (0.35.0+20060710.4) ... Setting up po-debconf (1.0.19) ... Setting up dh-autoreconf (12) ... Setting up dh-strip-nondeterminism (0.019-1) ... Setting up debhelper (9.20160403ubuntu1) ... Setting up sbuild-build-depends-kexec-tools-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... ┌──────────────────────────────────────────────────────────────────────────────┐ │ Build environment │ └──────────────────────────────────────────────────────────────────────────────┘ Kernel: Linux 3.2.0-98-highbank armhf (armv7l) Toolchain package versions: binutils_2.26-11ubuntu2 dpkg-dev_1.18.7ubuntu1 g++-5_5.4.0-4ubuntu1 gcc-5_5.4.0-4ubuntu1 libc6-dev_2.23-0ubuntu3 libstdc++-5-dev_5.4.0-4ubuntu1 libstdc++6_6.1.1-6ubuntu11 linux-libc-dev_4.4.0-25.44 Package versions: adduser_3.113+nmu3ubuntu4 advancecomp_1.20-1 apt_1.3~exp2 apt-transport-https_1.3~exp2 autoconf_2.69-10 automake_1:1.15-4ubuntu1 autopoint_0.19.7-2ubuntu3 autotools-dev_20160430.1 base-files_9.6ubuntu2 base-passwd_3.5.39 bash_4.3-14ubuntu2 binutils_2.26-11ubuntu2 bsdmainutils_9.0.6ubuntu3 bsdutils_1:2.28-5ubuntu2 build-essential_12.1ubuntu2 bzip2_1.0.6-8build1 ca-certificates_20160104ubuntu1 coreutils_8.25-2ubuntu2 cpp_4:5.3.1-1ubuntu1 cpp-5_5.4.0-4ubuntu1 dash_0.5.8-2.1ubuntu2 debconf_1.5.59ubuntu1 debhelper_9.20160403ubuntu1 debianutils_4.7 dh-autoreconf_12 dh-strip-nondeterminism_0.019-1 diffutils_1:3.3-3 dmsetup_2:1.02.124-1ubuntu1 dpkg_1.18.7ubuntu1 dpkg-dev_1.18.7ubuntu1 e2fslibs_1.42.13-1ubuntu1 e2fsprogs_1.42.13-1ubuntu1 fakeroot_1.20.2-1ubuntu1 file_1:5.25-2ubuntu1 findutils_4.6.0+git+20160126-2 g++_4:5.3.1-1ubuntu1 g++-5_5.4.0-4ubuntu1 gcc_4:5.3.1-1ubuntu1 gcc-5_5.4.0-4ubuntu1 gcc-5-base_5.4.0-4ubuntu1 gcc-6-base_6.1.1-6ubuntu11 gettext_0.19.7-2ubuntu3 gettext-base_0.19.7-2ubuntu3 gnupg_1.4.20-1ubuntu3 gpgv_1.4.20-1ubuntu3 grep_2.25-3 groff-base_1.22.3-7 gzip_1.6-4ubuntu1 hostname_3.17ubuntu1 init_1.34ubuntu1 init-system-helpers_1.34ubuntu1 initscripts_2.88dsf-59.6ubuntu1 insserv_1.14.0-5.3ubuntu1 intltool-debian_0.35.0+20060710.4 libacl1_2.2.52-3 libapparmor1_2.10.95-0ubuntu2 libapt-pkg5.0_1.3~exp2 libarchive-zip-perl_1.57-1 libasan2_5.4.0-4ubuntu1 libasn1-8-heimdal_1.7~git20150920+dfsg-4ubuntu1 libasprintf0v5_0.19.7-2ubuntu3 libatomic1_6.1.1-6ubuntu11 libattr1_1:2.4.47-2 libaudit-common_1:2.4.5-1ubuntu2 libaudit1_1:2.4.5-1ubuntu2 libblkid1_2.28-5ubuntu2 libbz2-1.0_1.0.6-8build1 libc-bin_2.23-0ubuntu3 libc-dev-bin_2.23-0ubuntu3 libc6_2.23-0ubuntu3 libc6-dev_2.23-0ubuntu3 libcap2_1:2.25-1 libcap2-bin_1:2.25-1 libcc1-0_6.1.1-6ubuntu11 libcomerr2_1.42.13-1ubuntu1 libcroco3_0.6.11-1 libcryptsetup4_2:1.6.6-5ubuntu2 libcurl3-gnutls_7.47.0-1ubuntu2 libdb5.3_5.3.28-11 libdebconfclient0_0.213ubuntu1 libdevmapper1.02.1_2:1.02.124-1ubuntu1 libdpkg-perl_1.18.7ubuntu1 libfakeroot_1.20.2-1ubuntu1 libfdisk1_2.28-5ubuntu2 libffi6_3.2.1-4 libfile-stripnondeterminism-perl_0.019-1 libgcc-5-dev_5.4.0-4ubuntu1 libgcc1_1:6.1.1-6ubuntu11 libgcrypt20_1.7.0-2 libgdbm3_1.8.3-14 libglib2.0-0_2.48.1-1 libgmp10_2:6.1.0+dfsg-2 libgnutls30_3.4.11-4ubuntu1 libgomp1_6.1.1-6ubuntu11 libgpg-error0_1.22-2 libgssapi-krb5-2_1.14.2+dfsg-1 libgssapi3-heimdal_1.7~git20150920+dfsg-4ubuntu1 libhcrypto4-heimdal_1.7~git20150920+dfsg-4ubuntu1 libheimbase1-heimdal_1.7~git20150920+dfsg-4ubuntu1 libheimntlm0-heimdal_1.7~git20150920+dfsg-4ubuntu1 libhogweed4_3.2-1 libhx509-5-heimdal_1.7~git20150920+dfsg-4ubuntu1 libicu57_57.1-1 libidn11_1.32-3ubuntu1 libisl15_0.17.1-1 libk5crypto3_1.14.2+dfsg-1 libkeyutils1_1.5.9-8ubuntu1 libkmod2_22-1ubuntu4 libkrb5-26-heimdal_1.7~git20150920+dfsg-4ubuntu1 libkrb5-3_1.14.2+dfsg-1 libkrb5support0_1.14.2+dfsg-1 libldap-2.4-2_2.4.42+dfsg-2ubuntu4 liblockfile-bin_1.09-6ubuntu1 liblockfile1_1.09-6ubuntu1 liblz4-1_0.0~r131-2ubuntu2 liblzma5_5.1.1alpha+20120614-2ubuntu2 libmagic1_1:5.25-2ubuntu1 libmount1_2.28-5ubuntu2 libmpc3_1.0.3-1 libmpfr4_3.1.4-2 libncurses5_6.0+20160319-1ubuntu1 libncursesw5_6.0+20160319-1ubuntu1 libnettle6_3.2-1 libp11-kit0_0.23.2-3 libpam-modules_1.1.8-3.2ubuntu2 libpam-modules-bin_1.1.8-3.2ubuntu2 libpam-runtime_1.1.8-3.2ubuntu2 libpam0g_1.1.8-3.2ubuntu2 libpcre3_2:8.38-3.1 libperl5.22_5.22.2-1 libpipeline1_1.4.1-2 libpng12-0_1.2.54-6ubuntu1 libpng16-16_1.6.22-1 libprocps4_2:3.3.10-4ubuntu2 libprocps5_2:3.3.11-3ubuntu1 libreadline6_6.3-8ubuntu2 libroken18-heimdal_1.7~git20150920+dfsg-4ubuntu1 librtmp1_2.4+20151223.gitfa8646d.1-1 libsasl2-2_2.1.26.dfsg1-15 libsasl2-modules-db_2.1.26.dfsg1-15 libseccomp2_2.3.1-2ubuntu2 libselinux1_2.5-3 libsemanage-common_2.5-1 libsemanage1_2.5-1 libsepol1_2.5-1 libsigsegv2_2.10-5 libslang2_2.3.0-2.3ubuntu1 libsmartcols1_2.28-5ubuntu2 libsqlite3-0_3.13.0-1 libss2_1.42.13-1ubuntu1 libssl1.0.0_1.0.2g-1ubuntu4 libstdc++-5-dev_5.4.0-4ubuntu1 libstdc++6_6.1.1-6ubuntu11 libsystemd0_230-2git1 libtasn1-6_4.8-1 libtimedate-perl_2.3000-2 libtinfo5_6.0+20160319-1ubuntu1 libtool_2.4.6-0.1 libubsan0_6.1.1-6ubuntu11 libudev1_230-2git1 libunistring0_0.9.3-5.2ubuntu1 libusb-0.1-4_2:0.1.12-30 libustr-1.0-1_1.0.4-5 libuuid1_2.28-5ubuntu2 libwind0-heimdal_1.7~git20150920+dfsg-4ubuntu1 libxml2_2.9.3+dfsg1-1.2 linux-libc-dev_4.4.0-25.44 lockfile-progs_0.1.17 login_1:4.2-3.1ubuntu5 lsb-base_9.20160110ubuntu1 m4_1.4.17-5 make_4.1-9 man-db_2.7.5-1 mawk_1.3.3-17ubuntu2 mount_2.28-5ubuntu2 multiarch-support_2.23-0ubuntu3 ncurses-base_6.0+20160319-1ubuntu1 ncurses-bin_6.0+20160319-1ubuntu1 openssl_1.0.2g-1ubuntu4 optipng_0.7.6-1build1 passwd_1:4.2-3.1ubuntu5 patch_2.7.5-1 perl_5.22.2-1 perl-base_5.22.2-1 perl-modules-5.22_5.22.2-1 pkg-create-dbgsym_0.72 pkgbinarymangler_130 po-debconf_1.0.19 policyrcd-script-zg2_0.1-3 procps_2:3.3.11-3ubuntu1 readline-common_6.3-8ubuntu2 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-kexec-tools-dummy_0.invalid.0 sed_4.2.2-7.1 sensible-utils_0.0.9 systemd_230-2git1 systemd-sysv_230-2git1 sysv-rc_2.88dsf-59.6ubuntu1 sysvinit-utils_2.88dsf-59.6ubuntu1 tar_1.29-1 tzdata_2016d-2 ubuntu-keyring_2016.05.13 util-linux_2.28-5ubuntu2 xz-utils_5.1.1alpha+20120614-2ubuntu2 zlib1g_1:1.2.8.dfsg-2ubuntu5 ┌──────────────────────────────────────────────────────────────────────────────┐ │ Build │ └──────────────────────────────────────────────────────────────────────────────┘ Unpack source ───────────── gpgv: Signature made Wed Jun 15 12:23:22 2016 UTC using RSA key ID 75BDD52E gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./kexec-tools_2.0.10-2ubuntu1.dsc dpkg-source: info: extracting kexec-tools in kexec-tools-2.0.10 dpkg-source: info: unpacking kexec-tools_2.0.10.orig.tar.gz dpkg-source: info: unpacking kexec-tools_2.0.10-2ubuntu1.debian.tar.xz dpkg-source: info: applying debianize.patch dpkg-source: info: applying static_binary_warning.patch dpkg-source: info: applying distclean_fix.patch dpkg-source: info: applying add_debian_readme.patch dpkg-source: info: applying coldreboot.patch dpkg-source: info: applying linker-option.patch dpkg-source: info: applying powerpcspe_support.patch dpkg-source: info: applying allow-external-build-date.patch dpkg-source: info: applying format-security.patch dpkg-source: info: applying lp1546260-fix-purgatory-fail-gcc5.patch Check disc space ──────────────── Sufficient free space for build User Environment ──────────────── DEB_BUILD_OPTIONS=parallel=4 HOME=/home/buildd LANG=C.UTF-8 LANGUAGE=en_GB: LOGNAME=buildd MAIL=/var/mail/buildd OLDPWD=/ PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games PWD=/«PKGBUILDDIR» SHELL=/bin/sh SUDO_COMMAND=/usr/sbin/chroot /«CHROOT» su buildd -s /bin/sh -c cd '/«PKGBUILDDIR»' && 'env' SUDO_GID=2501 SUDO_UID=2001 SUDO_USER=buildd TERM=unknown USER=buildd USERNAME=root dpkg-buildpackage ───────────────── dpkg-buildpackage: info: source package kexec-tools dpkg-buildpackage: info: source version 1:2.0.10-2ubuntu1 dpkg-buildpackage: info: source distribution yakkety dpkg-source --before-build kexec-tools-2.0.10 dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh_testdir # Add here commands to configure the package. dh_autoreconf CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" CFLAGS="-g -O2 -fstack-protector-strong -Wformat -Werror=format-security" LDFLAGS="-Wl,-Bsymbolic-functions -Wl,-z,relro" ./configure --prefix=/usr --sbindir=/sbin --mandir=/usr/share/man --datadir=/usr/share checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking build system type... armv7l-unknown-linux-gnueabihf checking host system type... armv7l-unknown-linux-gnueabihf checking target system type... armv7l-unknown-linux-gnueabihf checking how to run the C preprocessor... gcc -E checking for ld... ld checking for as... as checking for objcopy... objcopy checking for ar... ar checking for strip... strip checking whether gcc accepts -fno-zero-initialized-in-bss... Yes checking for a BSD-compatible install... /usr/bin/install -c checking for mkdir... mkdir checking for rm... rm checking for cp... cp checking for ln... ln checking for tar... tar checking for rpmbuild... no checking for sed... sed checking for find... find checking for xargs... xargs checking for dirname... dirname checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking lzma.h usability... no checking lzma.h presence... no checking for lzma.h... no checking xenctrl.h usability... no checking xenctrl.h presence... no checking for xenctrl.h... no configure: creating ./config.status config.status: creating Makefile config.status: creating include/config.h touch configure-stamp dh_testdir dh_testroot rm -f build-stamp configure-stamp rm -fr tmp-source # Add here commands to clean up after the build process. /usr/bin/make dist-clean make[1]: Entering directory '/«PKGBUILDDIR»' rm -f util_lib/compute_ip_checksum.o util_lib/sha256.o util_lib/compute_ip_checksum.d util_lib/sha256.d libutil.a util/bin-to-hex.o bin/bin-to-hex purgatory/purgatory.o purgatory/printf.o purgatory/string.o purgatory/sha256.o purgatory/purgatory.d purgatory/printf.d purgatory/string.d purgatory/sha256.d purgatory/purgatory.ro purgatory/purgatory.ro.sym purgatory/purgatory.map kexec/kexec.o kexec/ifdown.o kexec/kexec-elf.o kexec/kexec-elf-exec.o kexec/kexec-elf-core.o kexec/kexec-elf-rel.o kexec/kexec-elf-boot.o kexec/kexec-iomem.o kexec/firmware_memmap.o kexec/crashdump.o kexec/crashdump-xen.o kexec/phys_arch.o kexec/kernel_version.o kexec/lzma.o kexec/zlib.o kexec/kexec-xen.o kexec/proc_iomem.o kexec/virt_to_phys.o kexec/arch/arm/phys_to_virt.o kexec/add_segment.o kexec/add_buffer.o kexec/arch_reuse_initrd.o kexec/kexec-uImage.o kexec/fs2dt.o kexec/arch/arm/kexec-elf-rel-arm.o kexec/arch/arm/kexec-zImage-arm.o kexec/arch/arm/kexec-uImage-arm.o kexec/arch/arm/kexec-arm.o kexec/arch/arm/crashdump-arm.o kexec/fs2dt.o kexec/libfdt/fdt.o kexec/libfdt/fdt_ro.o kexec/libfdt/fdt_wip.o kexec/libfdt/fdt_sw.o kexec/libfdt/fdt_rw.o kexec/libfdt/fdt_strerror.o kexec/libfdt/fdt.o kexec/libfdt/fdt_ro.o kexec/libfdt/fdt_wip.o kexec/libfdt/fdt_sw.o kexec/libfdt/fdt_rw.o kexec/libfdt/fdt_strerror.o kexec/purgatory.o kexec/kexec.d kexec/ifdown.d kexec/kexec-elf.d kexec/kexec-elf-exec.d kexec/kexec-elf-core.d kexec/kexec-elf-rel.d kexec/kexec-elf-boot.d kexec/kexec-iomem.d kexec/firmware_memmap.d kexec/crashdump.d kexec/crashdump-xen.d kexec/phys_arch.d kexec/kernel_version.d kexec/lzma.d kexec/zlib.d kexec/kexec-xen.d kexec/proc_iomem.d kexec/virt_to_phys.d kexec/arch/arm/phys_to_virt.d kexec/add_segment.d kexec/add_buffer.d kexec/arch_reuse_initrd.d kexec/kexec-uImage.d kexec/fs2dt.d kexec/arch/arm/kexec-elf-rel-arm.d kexec/arch/arm/kexec-zImage-arm.d kexec/arch/arm/kexec-uImage-arm.d kexec/arch/arm/kexec-arm.d kexec/arch/arm/crashdump-arm.d kexec/fs2dt.d kexec/libfdt/fdt.d kexec/libfdt/fdt_ro.d kexec/libfdt/fdt_wip.d kexec/libfdt/fdt_sw.d kexec/libfdt/fdt_rw.d kexec/libfdt/fdt_strerror.d kexec/libfdt/fdt.d kexec/libfdt/fdt_ro.d kexec/libfdt/fdt_wip.d kexec/libfdt/fdt_sw.d kexec/libfdt/fdt_rw.d kexec/libfdt/fdt_strerror.d kexec/purgatory.d kexec/purgatory.c build/sbin/kexec build/share/man/man8/kexec.8 kdump/kdump.o kdump/kdump.d build/sbin/kdump build/share/man/man8/kdump.8 vmcore-dmesg/vmcore-dmesg.o vmcore-dmesg/vmcore-dmesg.d build/sbin/vmcore-dmesg build/share/man/man8/vmcore-dmesg.8 rm -rf build rm -f kexec-tools-2.0.10.tar kexec-tools-2.0.10.tar.gz rm -f config.log config.status config.cache Makefile include/config.h include/stamp-h* rm -f include/config.h.in configure kexec-tools.spec rm -rf autom4te.cache make[1]: Leaving directory '/«PKGBUILDDIR»' dh_autoreconf_clean dh_clean debconf-updatepo debian/rules build-arch dh_testdir # Add here commands to configure the package. dh_autoreconf CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" CFLAGS="-g -O2 -fstack-protector-strong -Wformat -Werror=format-security" LDFLAGS="-Wl,-Bsymbolic-functions -Wl,-z,relro" ./configure --prefix=/usr --sbindir=/sbin --mandir=/usr/share/man --datadir=/usr/share checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking build system type... armv7l-unknown-linux-gnueabihf checking host system type... armv7l-unknown-linux-gnueabihf checking target system type... armv7l-unknown-linux-gnueabihf checking how to run the C preprocessor... gcc -E checking for ld... ld checking for as... as checking for objcopy... objcopy checking for ar... ar checking for strip... strip checking whether gcc accepts -fno-zero-initialized-in-bss... Yes checking for a BSD-compatible install... /usr/bin/install -c checking for mkdir... mkdir checking for rm... rm checking for cp... cp checking for ln... ln checking for tar... tar checking for rpmbuild... no checking for sed... sed checking for find... find checking for xargs... xargs checking for dirname... dirname checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking lzma.h usability... no checking lzma.h presence... no checking for lzma.h... no checking xenctrl.h usability... no checking xenctrl.h presence... no checking for xenctrl.h... no configure: creating ./config.status config.status: creating Makefile config.status: creating include/config.h touch configure-stamp dh_testdir # Add here commands to compile the package. /usr/bin/make -j 4 make[1]: Entering directory '/«PKGBUILDDIR»' gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/kexec.o kexec/kexec.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/ifdown.o kexec/ifdown.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/kexec-elf.o kexec/kexec-elf.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/kexec-elf-exec.o kexec/kexec-elf-exec.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/kexec-elf-core.o kexec/kexec-elf-core.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/kexec-elf-rel.o kexec/kexec-elf-rel.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/kexec-elf-boot.o kexec/kexec-elf-boot.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/kexec-iomem.o kexec/kexec-iomem.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/firmware_memmap.o kexec/firmware_memmap.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/crashdump.o kexec/crashdump.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/crashdump-xen.o kexec/crashdump-xen.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/phys_arch.o kexec/phys_arch.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/kernel_version.o kexec/kernel_version.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/lzma.o kexec/lzma.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/zlib.o kexec/zlib.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/kexec-xen.o kexec/kexec-xen.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/proc_iomem.o kexec/proc_iomem.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/virt_to_phys.o kexec/virt_to_phys.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/arch/arm/phys_to_virt.o kexec/arch/arm/phys_to_virt.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/add_segment.o kexec/add_segment.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/add_buffer.o kexec/add_buffer.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/kexec-uImage.o kexec/kexec-uImage.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -include ./kexec/arch/arm/crashdump-arm.h -include ./kexec/arch/arm/kexec-arm.h -c -MD -o kexec/fs2dt.o kexec/fs2dt.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/arch_reuse_initrd.o kexec/arch_reuse_initrd.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/arch/arm/kexec-elf-rel-arm.o kexec/arch/arm/kexec-elf-rel-arm.c kexec/kexec-uImage.c: In function ‘uImage_load’: kexec/kexec-uImage.c:270:26: warning: pointer targets in passing argument 1 of ‘uImage_gz_load’ differ in signedness [-Wpointer-sign] return uImage_gz_load(img_buf, img_len, image); ^ kexec/kexec-uImage.c:227:12: note: expected ‘const char *’ but argument is of type ‘const unsigned char *’ static int uImage_gz_load(const char *UNUSED(buf), off_t UNUSED(len), ^ gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/arch/arm/kexec-zImage-arm.o kexec/arch/arm/kexec-zImage-arm.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/arch/arm/kexec-uImage-arm.o kexec/arch/arm/kexec-uImage-arm.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/arch/arm/kexec-arm.o kexec/arch/arm/kexec-arm.c kexec/arch/arm/kexec-uImage-arm.c: In function ‘uImage_arm_probe’: kexec/arch/arm/kexec-uImage-arm.c:14:29: warning: pointer targets in passing argument 1 of ‘uImage_probe_kernel’ differ in signedness [-Wpointer-sign] return uImage_probe_kernel(buf, len, IH_ARCH_ARM); ^ In file included from kexec/arch/arm/kexec-uImage-arm.c:8:0: ./include/kexec-uImage.h:12:5: note: expected ‘const unsigned char *’ but argument is of type ‘const char *’ int uImage_probe_kernel(const unsigned char *buf, off_t len, unsigned int arch); ^ gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/arch/arm/crashdump-arm.o kexec/arch/arm/crashdump-arm.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/libfdt/fdt.o kexec/libfdt/fdt.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/libfdt/fdt_ro.o kexec/libfdt/fdt_ro.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/libfdt/fdt_wip.o kexec/libfdt/fdt_wip.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/libfdt/fdt_sw.o kexec/libfdt/fdt_sw.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/libfdt/fdt_rw.o kexec/libfdt/fdt_rw.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/libfdt/fdt_strerror.o kexec/libfdt/fdt_strerror.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -Os -fno-builtin -ffreestanding -fno-zero-initialized-in-bss -fno-PIC -fno-PIE -fno-stack-protector -I./purgatory/include -I./purgatory/arch/arm/include -I./util_lib/include -I./include -Iinclude -I/usr/lib/gcc/arm-linux-gnueabihf/5/include -c -MD -o purgatory/purgatory.o purgatory/purgatory.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -Os -fno-builtin -ffreestanding -fno-zero-initialized-in-bss -fno-PIC -fno-PIE -fno-stack-protector -I./purgatory/include -I./purgatory/arch/arm/include -I./util_lib/include -I./include -Iinclude -I/usr/lib/gcc/arm-linux-gnueabihf/5/include -c -MD -o purgatory/printf.o purgatory/printf.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -Os -fno-builtin -ffreestanding -fno-zero-initialized-in-bss -fno-PIC -fno-PIE -fno-stack-protector -I./purgatory/include -I./purgatory/arch/arm/include -I./util_lib/include -I./include -Iinclude -I/usr/lib/gcc/arm-linux-gnueabihf/5/include -c -MD -o purgatory/string.o purgatory/string.c mkdir -p purgatory gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -Os -fno-builtin -ffreestanding -fno-zero-initialized-in-bss -fno-PIC -fno-PIE -fno-stack-protector -O0 -I./purgatory/include -I./purgatory/arch/arm/include -I./util_lib/include -I./include -Iinclude -I/usr/lib/gcc/arm-linux-gnueabihf/5/include -c -o purgatory/sha256.o util_lib/sha256.c gcc -O2 -Wall -o bin/bin-to-hex util/bin-to-hex.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -I./util_lib/include -c -MD -o util_lib/compute_ip_checksum.o util_lib/compute_ip_checksum.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -I./util_lib/include -c -MD -o util_lib/sha256.o util_lib/sha256.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -c -MD -o kdump/kdump.o kdump/kdump.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -c -MD -o vmcore-dmesg/vmcore-dmesg.o vmcore-dmesg/vmcore-dmesg.c cp kexec/kexec.8 build/share/man/man8/kexec.8 mkdir -p build/share/man/man8 cp kdump/kdump.8 build/share/man/man8/kdump.8 mkdir -p build/share/man/man8 cp vmcore-dmesg/vmcore-dmesg.8 build/share/man/man8/vmcore-dmesg.8 cp kexec/coldreboot.8 build/share/man/man8/coldreboot.8 cp kexec/coldreboot build/sbin/coldreboot /bin/chmod 755 build/sbin/coldreboot mkdir -p purgatory gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -Os -fno-builtin -ffreestanding -fno-zero-initialized-in-bss -fno-PIC -fno-PIE -fno-stack-protector -Wl,--no-undefined -nostartfiles -nostdlib -nodefaultlibs -e purgatory_start -r -Wl,-Map=purgatory/purgatory.map -o purgatory/purgatory.ro.sym purgatory/purgatory.o purgatory/printf.o purgatory/string.o purgatory/sha256.o /usr/bin/ld: warning: cannot find entry symbol purgatory_start; defaulting to 00000000 strip --strip-debug -o purgatory/purgatory.ro purgatory/purgatory.ro.sym mkdir -p kexec bin/bin-to-hex purgatory < purgatory/purgatory.ro > kexec/purgatory.c gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -I./include -I./util_lib/include -Iinclude/ -I./kexec/libfdt -I./kexec/arch/arm/include -c -MD -o kexec/purgatory.o kexec/purgatory.c gcc -Wl,-Bsymbolic-functions -Wl,-z,relro -o build/sbin/kdump kdump/kdump.o -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes gcc -Wl,-Bsymbolic-functions -Wl,-z,relro -o build/sbin/vmcore-dmesg vmcore-dmesg/vmcore-dmesg.o -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes ar rs libutil.a util_lib/compute_ip_checksum.o util_lib/sha256.o ar: creating libutil.a gcc -Wl,-Bsymbolic-functions -Wl,-z,relro -o build/sbin/kexec kexec/kexec.o kexec/ifdown.o kexec/kexec-elf.o kexec/kexec-elf-exec.o kexec/kexec-elf-core.o kexec/kexec-elf-rel.o kexec/kexec-elf-boot.o kexec/kexec-iomem.o kexec/firmware_memmap.o kexec/crashdump.o kexec/crashdump-xen.o kexec/phys_arch.o kexec/kernel_version.o kexec/lzma.o kexec/zlib.o kexec/kexec-xen.o kexec/proc_iomem.o kexec/virt_to_phys.o kexec/arch/arm/phys_to_virt.o kexec/add_segment.o kexec/add_buffer.o kexec/arch_reuse_initrd.o kexec/kexec-uImage.o kexec/fs2dt.o kexec/arch/arm/kexec-elf-rel-arm.o kexec/arch/arm/kexec-zImage-arm.o kexec/arch/arm/kexec-uImage-arm.o kexec/arch/arm/kexec-arm.o kexec/arch/arm/crashdump-arm.o kexec/libfdt/fdt.o kexec/libfdt/fdt_ro.o kexec/libfdt/fdt_wip.o kexec/libfdt/fdt_sw.o kexec/libfdt/fdt_rw.o kexec/libfdt/fdt_strerror.o kexec/purgatory.o libutil.a -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -fno-strict-aliasing -Wall -Wstrict-prototypes make[1]: Leaving directory '/«PKGBUILDDIR»' touch build-stamp fakeroot debian/rules binary-arch dh_testdir dh_testroot dh_prep dh_installdirs # Add here commands to install the package into debian/tmp. /usr/bin/make install DESTDIR=/«PKGBUILDDIR»/debian/kexec-tools make[1]: Entering directory '/«PKGBUILDDIR»' for file in build/sbin/kexec build/sbin/kdump build/sbin/vmcore-dmesg build/share/man/man8/kexec.8 build/share/man/man8/kdump.8 build/share/man/man8/vmcore-dmesg.8 build/share/man/man8/coldreboot.8 build/sbin/coldreboot ; do \ if test `dirname $file` = "build/sbin" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//sbin/; \ /usr/bin/install -c -m 755 $file /«PKGBUILDDIR»/debian/kexec-tools//sbin/; \ fi; \ if test `dirname $file` = "build/bin" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/bin/; \ /usr/bin/install -c -m 755 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/bin/; \ fi; \ if test `dirname $file` = "build/libexec" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/libexec/; \ /usr/bin/install -c -m 755 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/libexec/; \ fi; \ if test `dirname $file` = "build/share" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/; \ fi; \ if test `dirname $file` = "build/etc" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/etc/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/etc/; \ fi; \ if test `dirname $file` = "build/com" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/com/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/com/; \ fi; \ if test `dirname $file` = "build/var" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/var/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/var/; \ fi; \ if test `dirname $file` = "build/lib" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/lib/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/lib/; \ fi; \ if test `dirname $file` = "build/info" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/info/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/info/; \ fi; \ if test `dirname $file` = "build/share/man/man1" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man1; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man1; \ fi; \ if test `dirname $file` = "build/share/man/man2" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man2; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man2; \ fi; \ if test `dirname $file` = "build/share/man/man3" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man3/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man3/; \ fi; \ if test `dirname $file` = "build/share/man/man4" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man4/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man4/; \ fi; \ if test `dirname $file` = "build/share/man/man5" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man5/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man5/; \ fi; \ if test `dirname $file` = "build/share/man/man6" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man6/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man6/; \ fi; \ if test `dirname $file` = "build/share/man/man7" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man7/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man7/; \ fi; \ if test `dirname $file` = "build/share/man/man8" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man8/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/man/man8/; \ fi; \ if test `dirname $file` = "build/include" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/include/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/include/; \ fi; \ if test `dirname $file` = "build/share/kexec-tools" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/share/kexec-tools/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/share/kexec-tools/; \ fi; \ if test `dirname $file` = "build/lib/kexec-tools" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/lib/kexec-tools/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/lib/kexec-tools/; \ fi; \ if test `dirname $file` = "" ; then \ mkdir -p /«PKGBUILDDIR»/debian/kexec-tools//usr/include/kexec-tools/; \ /usr/bin/install -c -m 644 $file /«PKGBUILDDIR»/debian/kexec-tools//usr/include/kexec-tools/; \ fi; \ done make[1]: Leaving directory '/«PKGBUILDDIR»' [ ! -f /«PKGBUILDDIR»/debian/kexec-tools/usr/lib/kexec-tools-testing/kexec_test.static ] || strip /«PKGBUILDDIR»/debian/kexec-tools/usr/lib/kexec-tools-testing/kexec_test.static install -D -m 0755 debian/kexec-tools/sbin/kexec debian/kexec-tools-udeb/sbin/kexec dh_testdir dh_testroot dh_installchangelogs dh_installdocs dh_installdebconf dh_installinit -r --name=kexec dh_installinit -r --name=kexec-load dh_installexamples dh_lintian dh_install dh_installman dh_link dh_strip dh_strip debug symbol extraction: enabling -a due to Build-Debug-Symbols: yes in /CurrentlyBuilding dh_strip debug symbol extraction: all non-arch-all packages for this build platform armhf: kexec-tools kexec-tools-udeb dh_strip debug symbol extraction: packages to act on: kexec-tools kexec-tools-udeb dh_strip debug symbol extraction: ignored packages: dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dpkg-gencontrol: warning: package kexec-tools: unused substitution variable ${misc:Depends} /usr/bin/pkg_create_dbgsym: deferring build of .ddeb to dh_gencontrol dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe /usr/bin/pkg_create_dbgsym: deferring build of .ddeb to dh_gencontrol dh_compress dh_fixperms dh_installdeb dh_shlibdeps dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/kexec-tools/sbin/kexec debian/kexec-tools/sbin/vmcore-dmesg debian/kexec-tools/sbin/kdump were not linked against ld-linux-armhf.so.3 (they use none of the library's symbols) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/kexec-tools-udeb/sbin/kexec was not linked against ld-linux-armhf.so.3 (it uses none of the library's symbols) dh_gencontrol dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dh_gencontrol debug symbol wrapper: all non-arch-all packages for this build platform armhf: kexec-tools kexec-tools-udeb dh_gencontrol debug symbol wrapper: packages to act on: kexec-tools kexec-tools-udeb dh_gencontrol debug symbol wrapper: ignored packages: dh_gencontrol debug symbol wrapper: processing package kexec-tools (pkgdir debian/kexec-tools, ddeb package dir debian/kexec-tools-dbgsym) dh_gencontrol debug symbol wrapper: building kexec-tools-dbgsym_2.0.10-2ubuntu1_armhf.ddeb dpkg-deb: building package 'kexec-tools-dbgsym' in '../kexec-tools-dbgsym_2.0.10-2ubuntu1_armhf.ddeb'. dh_gencontrol debug symbol wrapper: dpkg-distaddfile kexec-tools-dbgsym_2.0.10-2ubuntu1_armhf.ddeb admin extra dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe dh_gencontrol debug symbol wrapper: processing package kexec-tools-udeb (pkgdir debian/kexec-tools-udeb, ddeb package dir debian/kexec-tools-udeb-dbgsym) dh_gencontrol debug symbol wrapper: building kexec-tools-udeb-dbgsym_2.0.10-2ubuntu1_armhf.ddeb dpkg-deb: building package 'kexec-tools-udeb-dbgsym' in '../kexec-tools-udeb-dbgsym_2.0.10-2ubuntu1_armhf.ddeb'. dh_gencontrol debug symbol wrapper: dpkg-distaddfile kexec-tools-udeb-dbgsym_2.0.10-2ubuntu1_armhf.ddeb debian-installer extra dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe dh_md5sums dh_builddeb INFO: Disabling pkgsanitychecks for udeb INFO: pkgstriptranslations version 130 INFO: pkgstriptranslations version 130 pkgstriptranslations: processing kexec-tools (in debian/kexec-tools); do_strip: 1, oemstrip: pkgstriptranslations: kexec-tools does not contain translations, skipping dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe pkgstriptranslations: preparing translation tarball kexec-tools_2.0.10-2ubuntu1_armhf_translations.tar.gz...done pkgmaintainermangler: Not overriding Maintainer for domain lists.ubuntu.com pkgmaintainermangler: Not overriding Maintainer for domain lists.ubuntu.com pkgstripfiles: processing control file: debian/kexec-tools-udeb/DEBIAN/control, package kexec-tools-udeb, directory debian/kexec-tools-udeb INFO: pkgstripfiles: waiting for lock (kexec-tools-udeb) ... pkgstripfiles: processing control file: debian/kexec-tools/DEBIAN/control, package kexec-tools, directory debian/kexec-tools pkgstripfiles: Truncating usr/share/doc/kexec-tools/changelog.Debian.gz to topmost ten records pkgstripfiles: Running PNG optimization (using 4 cpus) for package kexec-tools ... pkgstripfiles: No PNG files. dpkg-deb: building package 'kexec-tools' in '../kexec-tools_2.0.10-2ubuntu1_armhf.deb'. pkgstripfiles: Running PNG optimization (using 4 cpus) for package kexec-tools-udeb ... pkgstripfiles: No PNG files. dpkg-deb: building package 'kexec-tools-udeb' in 'debian/.debhelper/scratch-space/build-kexec-tools-udeb/kexec-tools-udeb_2.0.10-2ubuntu1_armhf.deb'. Renaming kexec-tools-udeb_2.0.10-2ubuntu1_armhf.deb to kexec-tools-udeb_2.0.10-2ubuntu1_armhf.udeb dpkg-genchanges --build=any -mLaunchpad Build Daemon >../kexec-tools_2.0.10-2ubuntu1_armhf.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build kexec-tools-2.0.10 dpkg-buildpackage: info: binary-only upload (no source included) ──────────────────────────────────────────────────────────────────────────────── Build finished at 20160615-1232 Finished ──────── I: Built successfully ┌──────────────────────────────────────────────────────────────────────────────┐ │ Post Build Chroot │ └──────────────────────────────────────────────────────────────────────────────┘ ┌──────────────────────────────────────────────────────────────────────────────┐ │ Changes │ └──────────────────────────────────────────────────────────────────────────────┘ kexec-tools_2.0.10-2ubuntu1_armhf.changes: ────────────────────────────────────────── Format: 1.8 Date: Thu, 02 Jun 2016 13:22:49 +0200 Source: kexec-tools Binary: kexec-tools kexec-tools-udeb Architecture: armhf armhf_translations Version: 1:2.0.10-2ubuntu1 Distribution: yakkety-proposed Urgency: medium Maintainer: Launchpad Build Daemon Changed-By: Louis Bouchard Description: kexec-tools - tools to support fast kexec reboots kexec-tools-udeb - tools to support fast kexec reboots (udeb) (udeb) Launchpad-Bugs-Fixed: 1587479 Changes: kexec-tools (1:2.0.10-2ubuntu1) yakkety; urgency=medium . * Merge from Debian unstable.(LP: #1587479) Remaining changes: - Default to not kexecing a kernel on boot in the automatically generated conffile - Don't call db_stop from the postinst. - Adjust INITCONFFILE to vmlinux if used - Use format-security.patch instead of const_string_warning.patch - Drop unneeded patches (all fixed upstream and not in series) : d/p/fix-callback-functions-given-to-kexec_iomem_for_each_line.patch d/p/kdump_makefile.patch d/p/kexec-p-fails-to-load-kernels-with-version-x.y.patch - [PowerPC64] Fix failure in purgatory when compiled with gcc5 Application of upstream fixes so kexec-tools work with gcc5 on PowerPC64 commit 4a2ae3a39c64dc43e9d094be9541253234ff4822, 1e423dc297d10eb7ff25c829d2856ef12fc81d77, 3debb8cf3272216119cb2e59a4963ce3c18fe8e3 * New changes: - Add maintainer script helper to handle removal of conffile /etc/default/grub.d/kexec-tools.cfg has been removed. Handle it properly - Add Breaks: statement toward kdump-tools Starting with kdump-tools 1:1.5.9-6, this package takes over the addition of crashkernel= parameter which has been removed from kexec-tools. Make sure that it is upgraded accordingly. * Dropped changes from previous merge - Add and install kdump init script and initramfs snippet : kdump script in initramfs replaced by kexec-tools long ago - Call to update-grub to update boot args with crashkernel= : Now handled by kexec-tools (>= 1:1.5.9-6) Checksums-Sha1: 9a5bba8b054603350438d561af25bcf4f37b509f 114608 kexec-tools-dbgsym_2.0.10-2ubuntu1_armhf.ddeb 2d256fdb01a1d2b49feb65118bb413f47352eb4e 97404 kexec-tools-udeb-dbgsym_2.0.10-2ubuntu1_armhf.ddeb 6d847994fe8d605c8ae9848a0dec198a442657d2 38934 kexec-tools-udeb_2.0.10-2ubuntu1_armhf.udeb 2d3c735ff1dccb4fb6411da949bfe182a7bedd98 61484 kexec-tools_2.0.10-2ubuntu1_armhf.deb e10877d283cc19027e4b8e267495b28ed829a41e 7464 kexec-tools_2.0.10-2ubuntu1_armhf_translations.tar.gz Checksums-Sha256: 0a76ea56993b849ecd14cc0efda52b2957f8dffb2f851ee4f5084908ef0abf6b 114608 kexec-tools-dbgsym_2.0.10-2ubuntu1_armhf.ddeb a0d03c3ba355dd1eab1d24b9e5715eb17ec4057472d7374da50fcbaee0f4e1fb 97404 kexec-tools-udeb-dbgsym_2.0.10-2ubuntu1_armhf.ddeb 12c1017f8dc2fe4a2e18e6382a997c9293be5cb7e196df16c54abbf3425976f5 38934 kexec-tools-udeb_2.0.10-2ubuntu1_armhf.udeb 187276734b8ea1c92dbc10ccc5071d395e666a37ba8e038add2f664ba1eb546f 61484 kexec-tools_2.0.10-2ubuntu1_armhf.deb d2de4a46a087bf8b8d8dfd3f47d140dbd48b4a5e4a47178a6496ea0a95a4ee14 7464 kexec-tools_2.0.10-2ubuntu1_armhf_translations.tar.gz Files: 876c847de35f0639699d489b8dc770f2 114608 admin extra kexec-tools-dbgsym_2.0.10-2ubuntu1_armhf.ddeb e2de5355ef4ed317f90269a7cfa36275 97404 debian-installer extra kexec-tools-udeb-dbgsym_2.0.10-2ubuntu1_armhf.ddeb bcdffa35f7091e433dbac29f23b81843 38934 debian-installer optional kexec-tools-udeb_2.0.10-2ubuntu1_armhf.udeb d3becad0919bbc63858d9752b7623505 61484 admin optional kexec-tools_2.0.10-2ubuntu1_armhf.deb c8ad555e8dd8876eb41ddd716732c165 7464 raw-translations - kexec-tools_2.0.10-2ubuntu1_armhf_translations.tar.gz Original-Maintainer: Khalid Aziz Package-Type: udeb ┌──────────────────────────────────────────────────────────────────────────────┐ │ Package contents │ └──────────────────────────────────────────────────────────────────────────────┘ kexec-tools-udeb_2.0.10-2ubuntu1_armhf.udeb ─────────────────────────────────────────── new debian package, version 2.0. size 38934 bytes: control archive= 390 bytes. 366 bytes, 11 lines control Package: kexec-tools-udeb Source: kexec-tools Version: 1:2.0.10-2ubuntu1 Architecture: armhf Maintainer: Ubuntu Developers Installed-Size: 85 Depends: libc6-udeb (>= 2.23) Section: debian-installer Priority: optional Description: tools to support fast kexec reboots (udeb) Original-Maintainer: Khalid Aziz drwxr-xr-x root/root 0 2016-06-15 12:32 ./ drwxr-xr-x root/root 0 2016-06-15 12:32 ./sbin/ -rwxr-xr-x root/root 83948 2016-06-15 12:32 ./sbin/kexec kexec-tools_2.0.10-2ubuntu1_armhf.deb ───────────────────────────────────── new debian package, version 2.0. size 61484 bytes: control archive= 5720 bytes. 41 bytes, 2 lines conffiles 682 bytes, 29 lines * config #!/bin/sh 620 bytes, 15 lines control 888 bytes, 14 lines md5sums 5147 bytes, 160 lines * postinst #!/bin/sh 2021 bytes, 77 lines * postrm #!/bin/sh 1104 bytes, 47 lines * preinst #!/bin/sh 603 bytes, 17 lines * prerm #!/bin/sh 4569 bytes, 41 lines templates Package: kexec-tools Version: 1:2.0.10-2ubuntu1 Architecture: armhf Maintainer: Ubuntu Developers Installed-Size: 164 Depends: libc6 (>= 2.7), debconf (>= 0.5) | debconf-2.0, debconf Breaks: kdump-tools (<< 1:1.5.9-6) Section: admin Priority: optional Homepage: http://kernel.org/pub/linux/utils/kernel/kexec/ Description: tools to support fast kexec reboots This package provides tools to load a kernel into memory and then "reboot" directly into that kernel using the kexec system call, bypassing the normal boot process. Original-Maintainer: Khalid Aziz drwxr-xr-x root/root 0 2016-06-15 12:32 ./ drwxr-xr-x root/root 0 2016-06-15 12:32 ./etc/ drwxr-xr-x root/root 0 2016-06-15 12:32 ./etc/init.d/ -rwxr-xr-x root/root 997 2016-06-08 13:42 ./etc/init.d/kexec -rwxr-xr-x root/root 3199 2016-06-08 13:42 ./etc/init.d/kexec-load drwxr-xr-x root/root 0 2016-06-15 12:32 ./sbin/ -rwxr-xr-x root/root 99 2016-06-15 12:32 ./sbin/coldreboot -rwxr-xr-x root/root 5636 2016-06-15 12:32 ./sbin/kdump -rwxr-xr-x root/root 83948 2016-06-15 12:32 ./sbin/kexec -rwxr-xr-x root/root 13876 2016-06-15 12:32 ./sbin/vmcore-dmesg drwxr-xr-x root/root 0 2016-06-15 12:32 ./usr/ drwxr-xr-x root/root 0 2016-06-15 12:32 ./usr/share/ drwxr-xr-x root/root 0 2016-06-15 12:32 ./usr/share/doc/ drwxr-xr-x root/root 0 2016-06-15 12:32 ./usr/share/doc/kexec-tools/ -rw-r--r-- root/root 2810 2010-07-29 09:22 ./usr/share/doc/kexec-tools/News -rw-r--r-- root/root 663 2016-06-08 13:42 ./usr/share/doc/kexec-tools/README.Debian -rw-r--r-- root/root 528 2010-07-29 09:22 ./usr/share/doc/kexec-tools/TODO -rw-r--r-- root/root 1899 2016-06-15 12:32 ./usr/share/doc/kexec-tools/changelog.Debian.gz -rw-r--r-- root/root 1175 2016-06-08 13:42 ./usr/share/doc/kexec-tools/copyright drwxr-xr-x root/root 0 2016-06-15 12:32 ./usr/share/lintian/ drwxr-xr-x root/root 0 2016-06-15 12:32 ./usr/share/lintian/overrides/ -rw-r--r-- root/root 368 2016-06-08 13:42 ./usr/share/lintian/overrides/kexec-tools drwxr-xr-x root/root 0 2016-06-15 12:32 ./usr/share/man/ drwxr-xr-x root/root 0 2016-06-15 12:32 ./usr/share/man/man8/ -rw-r--r-- root/root 397 2016-06-15 12:32 ./usr/share/man/man8/coldreboot.8.gz -rw-r--r-- root/root 810 2016-06-15 12:32 ./usr/share/man/man8/kdump.8.gz -rw-r--r-- root/root 2347 2016-06-15 12:32 ./usr/share/man/man8/kexec.8.gz -rw-r--r-- root/root 883 2016-06-15 12:32 ./usr/share/man/man8/vmcore-dmesg.8.gz ┌──────────────────────────────────────────────────────────────────────────────┐ │ Post Build │ └──────────────────────────────────────────────────────────────────────────────┘ ┌──────────────────────────────────────────────────────────────────────────────┐ │ Cleanup │ └──────────────────────────────────────────────────────────────────────────────┘ Not removing build depends: as requested Keeping session: ┌──────────────────────────────────────────────────────────────────────────────┐ │ Summary │ └──────────────────────────────────────────────────────────────────────────────┘ Build Architecture: armhf Build-Space: 6064 Build-Time: 66 Distribution: yakkety-proposed Host Architecture: armhf Install-Time: 46 Job: kexec-tools_2.0.10-2ubuntu1.dsc Machine Architecture: armhf Package: kexec-tools Package-Time: 117 Source-Version: 1:2.0.10-2ubuntu1 Space: 6064 Status: successful Version: 1:2.0.10-2ubuntu1 ──────────────────────────────────────────────────────────────────────────────── Finished at 20160615-1232 Build needed 00:01:57, 6064k disc space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['scan-for-processes', 'PACKAGEBUILD-10022900'] Scanning for processes to kill in build /home/buildd/build-PACKAGEBUILD-10022900/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', 'PACKAGEBUILD-10022900'] Unmounting chroot for build PACKAGEBUILD-10022900... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', 'PACKAGEBUILD-10022900'] Removing build PACKAGEBUILD-10022900