RUN: /usr/share/launchpad-buildd/slavebin/slave-prep ['slave-prep'] Forking launchpad-buildd slave process... Kernel version: Linux denneed01 3.13.0-33-powerpc64-smp #58-Ubuntu SMP Tue Jul 29 20:07:36 UTC 2014 ppc64 Buildd toolchain package versions: launchpad-buildd_125 python-lpbuildd_125 dpkg-dev_1.17.5ubuntu5.3. Syncing the system clock with the buildd NTP service... 24 Oct 17:10:56 ntpdate[15894]: adjust time server 10.211.37.1 offset 0.007381 sec RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', 'PACKAGEBUILD-6493150', '/home/buildd/filecache-default/0061a8ccefd4153f7b486906afe8086864d2a65e'] Unpacking chroot for build PACKAGEBUILD-6493150 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', 'PACKAGEBUILD-6493150'] Mounting chroot for build PACKAGEBUILD-6493150 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', 'PACKAGEBUILD-6493150', 'deb http://ftpmaster.internal/ubuntu vivid main universe', 'deb http://ftpmaster.internal/ubuntu vivid-security main universe', 'deb http://ftpmaster.internal/ubuntu vivid-updates main universe', 'deb http://ftpmaster.internal/ubuntu vivid-proposed main universe'] Overriding sources.list in build-PACKAGEBUILD-6493150 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', 'PACKAGEBUILD-6493150', 'powerpc'] Updating debian chroot for build PACKAGEBUILD-6493150 Ign http://ftpmaster.internal vivid InRelease Ign http://archive-team.internal vivid InRelease Ign http://ftpmaster.internal vivid-security InRelease Ign http://archive-team.internal vivid Release.gpg Ign http://ftpmaster.internal vivid-updates InRelease Get:1 http://archive-team.internal vivid Release [742 B] Ign http://ftpmaster.internal vivid-proposed InRelease Get:2 http://ftpmaster.internal vivid Release.gpg [933 B] Get:3 http://ftpmaster.internal vivid-security Release.gpg [933 B] Get:4 http://ftpmaster.internal vivid-updates Release.gpg [933 B] Get:5 http://ftpmaster.internal vivid-proposed Release.gpg [933 B] Get:6 http://ftpmaster.internal vivid Release [112 kB] Get:7 http://archive-team.internal vivid/main powerpc Packages Get:8 http://ftpmaster.internal vivid-security Release [59.7 kB] Ign http://archive-team.internal vivid/main Translation-en Get:9 http://ftpmaster.internal vivid-updates Release [59.7 kB] Get:10 http://ftpmaster.internal vivid-proposed Release [59.7 kB] Get:11 http://ftpmaster.internal vivid/main powerpc Packages [1298 kB] Get:12 http://ftpmaster.internal vivid/universe powerpc Packages [6070 kB] Get:13 http://ftpmaster.internal vivid/main Translation-en [769 kB] Get:14 http://ftpmaster.internal vivid/universe Translation-en [4273 kB] Get:15 http://ftpmaster.internal vivid-security/main powerpc Packages [14 B] Get:16 http://ftpmaster.internal vivid-security/universe powerpc Packages [14 B] Get:17 http://ftpmaster.internal vivid-security/main Translation-en [14 B] Get:18 http://ftpmaster.internal vivid-security/universe Translation-en [14 B] Get:19 http://ftpmaster.internal vivid-updates/main powerpc Packages [14 B] Get:20 http://ftpmaster.internal vivid-updates/universe powerpc Packages [14 B] Get:21 http://ftpmaster.internal vivid-updates/main Translation-en [14 B] Get:22 http://ftpmaster.internal vivid-updates/universe Translation-en [14 B] Get:23 http://ftpmaster.internal vivid-proposed/main powerpc Packages [39.4 kB] Get:24 http://ftpmaster.internal vivid-proposed/universe powerpc Packages [179 kB] Get:25 http://ftpmaster.internal vivid-proposed/main Translation-en [27.0 kB] Get:26 http://ftpmaster.internal vivid-proposed/universe Translation-en [154 kB] Fetched 13.1 MB in 10s (1261 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: base-files binutils ca-certificates cpp-4.9 g++-4.9 gcc-4.9 gcc-4.9-base grep libacl1 libasan1 libatomic1 libdb5.3 libgcc-4.9-dev libgcc1 libgmp10 libgomp1 libgssapi-krb5-2 libk5crypto3 libkrb5-3 libkrb5support0 libplymouth4 libsasl2-2 libsasl2-modules-db libstdc++-4.9-dev libstdc++6 libubsan0 plymouth tzdata 28 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 28.1 MB of archives. After this operation, 121 kB of additional disk space will be used. Get:1 http://ftpmaster.internal/ubuntu/ vivid/main base-files powerpc 7.2ubuntu8 [68.4 kB] Get:2 http://ftpmaster.internal/ubuntu/ vivid/main grep powerpc 2.20-4 [137 kB] Get:3 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libubsan0 powerpc 4.9.1-19ubuntu1 [78.5 kB] Get:4 http://ftpmaster.internal/ubuntu/ vivid-proposed/main gcc-4.9-base powerpc 4.9.1-19ubuntu1 [15.8 kB] Get:5 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libstdc++6 powerpc 4.9.1-19ubuntu1 [289 kB] Get:6 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libgomp1 powerpc 4.9.1-19ubuntu1 [37.5 kB] Get:7 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libatomic1 powerpc 4.9.1-19ubuntu1 [7364 B] Get:8 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libasan1 powerpc 4.9.1-19ubuntu1 [175 kB] Get:9 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libgcc-4.9-dev powerpc 4.9.1-19ubuntu1 [424 kB] Get:10 http://ftpmaster.internal/ubuntu/ vivid-proposed/main cpp-4.9 powerpc 4.9.1-19ubuntu1 [4473 kB] Get:11 http://ftpmaster.internal/ubuntu/ vivid-proposed/main binutils powerpc 2.24.90.20141023-1ubuntu1 [2233 kB] Get:12 http://ftpmaster.internal/ubuntu/ vivid-proposed/main gcc-4.9 powerpc 4.9.1-19ubuntu1 [4884 kB] Get:13 http://ftpmaster.internal/ubuntu/ vivid-proposed/main g++-4.9 powerpc 4.9.1-19ubuntu1 [12.3 MB] Get:14 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libstdc++-4.9-dev powerpc 4.9.1-19ubuntu1 [1105 kB] Get:15 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libgcc1 powerpc 1:4.9.1-19ubuntu1 [35.2 kB] Get:16 http://ftpmaster.internal/ubuntu/ vivid/main libgmp10 powerpc 2:6.0.0+dfsg-6 [198 kB] Get:17 http://ftpmaster.internal/ubuntu/ vivid/main libacl1 powerpc 2.2.52-2 [15.3 kB] Get:18 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libdb5.3 powerpc 5.3.28-6 [582 kB] Get:19 http://ftpmaster.internal/ubuntu/ vivid-proposed/main plymouth powerpc 0.9.0-0ubuntu8 [87.6 kB] Get:20 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libplymouth4 powerpc 0.9.0-0ubuntu8 [75.6 kB] Get:21 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libgssapi-krb5-2 powerpc 1.12.1+dfsg-11 [102 kB] Get:22 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libkrb5-3 powerpc 1.12.1+dfsg-11 [237 kB] Get:23 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libkrb5support0 powerpc 1.12.1+dfsg-11 [29.3 kB] Get:24 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libk5crypto3 powerpc 1.12.1+dfsg-11 [82.4 kB] Get:25 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libsasl2-modules-db powerpc 2.1.26.dfsg1-12 [13.9 kB] Get:26 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libsasl2-2 powerpc 2.1.26.dfsg1-12 [44.3 kB] Get:27 http://ftpmaster.internal/ubuntu/ vivid/main tzdata all 2014i-1 [182 kB] Get:28 http://ftpmaster.internal/ubuntu/ vivid-proposed/main ca-certificates all 20141019 [192 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 28.1 MB in 16s (1712 kB/s) (Reading database ... 11338 files and directories currently installed.) Preparing to unpack .../base-files_7.2ubuntu8_powerpc.deb ... Unpacking base-files (7.2ubuntu8) over (7.2ubuntu7) ... Setting up base-files (7.2ubuntu8) ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Installing new version of config file /etc/lsb-release ... Installing new version of config file /etc/os-release ... (Reading database ... 11338 files and directories currently installed.) Preparing to unpack .../grep_2.20-4_powerpc.deb ... Unpacking grep (2.20-4) over (2.20-3) ... Setting up grep (2.20-4) ... (Reading database ... 11338 files and directories currently installed.) Preparing to unpack .../libubsan0_4.9.1-19ubuntu1_powerpc.deb ... Unpacking libubsan0:powerpc (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Preparing to unpack .../gcc-4.9-base_4.9.1-19ubuntu1_powerpc.deb ... Unpacking gcc-4.9-base:powerpc (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Setting up gcc-4.9-base:powerpc (4.9.1-19ubuntu1) ... (Reading database ... 11338 files and directories currently installed.) Preparing to unpack .../libstdc++6_4.9.1-19ubuntu1_powerpc.deb ... Unpacking libstdc++6:powerpc (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Setting up libstdc++6:powerpc (4.9.1-19ubuntu1) ... Processing triggers for libc-bin (2.19-10ubuntu2) ... (Reading database ... 11338 files and directories currently installed.) Preparing to unpack .../libgomp1_4.9.1-19ubuntu1_powerpc.deb ... Unpacking libgomp1:powerpc (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Preparing to unpack .../libatomic1_4.9.1-19ubuntu1_powerpc.deb ... Unpacking libatomic1:powerpc (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Preparing to unpack .../libasan1_4.9.1-19ubuntu1_powerpc.deb ... Unpacking libasan1:powerpc (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Preparing to unpack .../libgcc-4.9-dev_4.9.1-19ubuntu1_powerpc.deb ... Unpacking libgcc-4.9-dev:powerpc (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Preparing to unpack .../cpp-4.9_4.9.1-19ubuntu1_powerpc.deb ... Unpacking cpp-4.9 (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Preparing to unpack .../binutils_2.24.90.20141023-1ubuntu1_powerpc.deb ... Unpacking binutils (2.24.90.20141023-1ubuntu1) over (2.24.90.20141014-0ubuntu3) ... Preparing to unpack .../gcc-4.9_4.9.1-19ubuntu1_powerpc.deb ... Unpacking gcc-4.9 (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Preparing to unpack .../g++-4.9_4.9.1-19ubuntu1_powerpc.deb ... Unpacking g++-4.9 (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Preparing to unpack .../libstdc++-4.9-dev_4.9.1-19ubuntu1_powerpc.deb ... Unpacking libstdc++-4.9-dev:powerpc (4.9.1-19ubuntu1) over (4.9.1-16ubuntu6) ... Preparing to unpack .../libgcc1_1%3a4.9.1-19ubuntu1_powerpc.deb ... Unpacking libgcc1:powerpc (1:4.9.1-19ubuntu1) over (1:4.9.1-16ubuntu6) ... Setting up libgcc1:powerpc (1:4.9.1-19ubuntu1) ... Processing triggers for libc-bin (2.19-10ubuntu2) ... (Reading database ... 11342 files and directories currently installed.) Preparing to unpack .../libgmp10_2%3a6.0.0+dfsg-6_powerpc.deb ... Unpacking libgmp10:powerpc (2:6.0.0+dfsg-6) over (2:6.0.0+dfsg-4build1) ... Preparing to unpack .../libacl1_2.2.52-2_powerpc.deb ... Unpacking libacl1:powerpc (2.2.52-2) over (2.2.52-1.1) ... Setting up libacl1:powerpc (2.2.52-2) ... Processing triggers for libc-bin (2.19-10ubuntu2) ... (Reading database ... 11342 files and directories currently installed.) Preparing to unpack .../libdb5.3_5.3.28-6_powerpc.deb ... Unpacking libdb5.3:powerpc (5.3.28-6) over (5.3.28-5) ... Setting up libdb5.3:powerpc (5.3.28-6) ... Processing triggers for libc-bin (2.19-10ubuntu2) ... (Reading database ... 11342 files and directories currently installed.) Preparing to unpack .../plymouth_0.9.0-0ubuntu8_powerpc.deb ... Unpacking plymouth (0.9.0-0ubuntu8) over (0.9.0-0ubuntu7) ... Preparing to unpack .../libplymouth4_0.9.0-0ubuntu8_powerpc.deb ... Unpacking libplymouth4:powerpc (0.9.0-0ubuntu8) over (0.9.0-0ubuntu7) ... Preparing to unpack .../libgssapi-krb5-2_1.12.1+dfsg-11_powerpc.deb ... Unpacking libgssapi-krb5-2:powerpc (1.12.1+dfsg-11) over (1.12.1+dfsg-10) ... Preparing to unpack .../libkrb5-3_1.12.1+dfsg-11_powerpc.deb ... Unpacking libkrb5-3:powerpc (1.12.1+dfsg-11) over (1.12.1+dfsg-10) ... Preparing to unpack .../libkrb5support0_1.12.1+dfsg-11_powerpc.deb ... Unpacking libkrb5support0:powerpc (1.12.1+dfsg-11) over (1.12.1+dfsg-10) ... Preparing to unpack .../libk5crypto3_1.12.1+dfsg-11_powerpc.deb ... Unpacking libk5crypto3:powerpc (1.12.1+dfsg-11) over (1.12.1+dfsg-10) ... Preparing to unpack .../libsasl2-modules-db_2.1.26.dfsg1-12_powerpc.deb ... Unpacking libsasl2-modules-db:powerpc (2.1.26.dfsg1-12) over (2.1.26.dfsg1-11) ... Preparing to unpack .../libsasl2-2_2.1.26.dfsg1-12_powerpc.deb ... Unpacking libsasl2-2:powerpc (2.1.26.dfsg1-12) over (2.1.26.dfsg1-11) ... Preparing to unpack .../tzdata_2014i-1_all.deb ... Unpacking tzdata (2014i-1) over (2014h-2) ... Setting up tzdata (2014i-1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Oct 24 21:11:32 UTC 2014. Universal Time is now: Fri Oct 24 21:11:32 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... 11345 files and directories currently installed.) Preparing to unpack .../ca-certificates_20141019_all.deb ... Unpacking ca-certificates (20141019) over (20140325) ... Setting up libubsan0:powerpc (4.9.1-19ubuntu1) ... Setting up libgomp1:powerpc (4.9.1-19ubuntu1) ... Setting up libatomic1:powerpc (4.9.1-19ubuntu1) ... Setting up libasan1:powerpc (4.9.1-19ubuntu1) ... Setting up libgcc-4.9-dev:powerpc (4.9.1-19ubuntu1) ... Setting up libgmp10:powerpc (2:6.0.0+dfsg-6) ... Setting up cpp-4.9 (4.9.1-19ubuntu1) ... Setting up binutils (2.24.90.20141023-1ubuntu1) ... Setting up gcc-4.9 (4.9.1-19ubuntu1) ... Setting up libstdc++-4.9-dev:powerpc (4.9.1-19ubuntu1) ... Setting up g++-4.9 (4.9.1-19ubuntu1) ... Setting up libplymouth4:powerpc (0.9.0-0ubuntu8) ... Setting up plymouth (0.9.0-0ubuntu8) ... update-initramfs: deferring update (trigger activated) Setting up libkrb5support0:powerpc (1.12.1+dfsg-11) ... Setting up libk5crypto3:powerpc (1.12.1+dfsg-11) ... Setting up libkrb5-3:powerpc (1.12.1+dfsg-11) ... Setting up libgssapi-krb5-2:powerpc (1.12.1+dfsg-11) ... Setting up libsasl2-modules-db:powerpc (2.1.26.dfsg1-12) ... Setting up libsasl2-2:powerpc (2.1.26.dfsg1-12) ... Setting up ca-certificates (20141019) ... Processing triggers for libc-bin (2.19-10ubuntu2) ... Processing triggers for initramfs-tools (0.103ubuntu8) ... Processing triggers for ca-certificates (20141019) ... Updating certificates in /etc/ssl/certs... 10 added, 5 removed; done. Running hooks in /etc/ca-certificates/update.d....done. RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', 'PACKAGEBUILD-6493150', 'powerpc', 'vivid-proposed', '--nolog', '--batch', '--archive=ubuntu', '--dist=vivid-proposed', '--purpose=PRIMARY', '--architecture=powerpc', '--comp=universe', 'libcoro-perl_6.410-1.dsc'] Initiating build PACKAGEBUILD-6493150 with 8 jobs across 8 processor cores. Kernel reported to sbuild: 3.13.0-33-powerpc64-smp #58-Ubuntu SMP Tue Jul 29 20:07:36 UTC 2014 ppc Automatic build of libcoro-perl_6.410-1 on denneed01 by sbuild/powerpc 1.170.5 Build started at 20141024-1711 ****************************************************************************** libcoro-perl_6.410-1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 9.20120312), libanyevent-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl Checking for already installed source dependencies... debhelper: missing libanyevent-perl: missing libcommon-sense-perl: missing libev-perl: missing libevent-perl: missing libguard-perl: missing perl: already installed (5.20.1-1) Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper libanyevent-perl libcommon-sense-perl libev-perl libevent-perl libguard-perl Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils dh-apparmor file gettext gettext-base groff-base intltool-debian libasprintf0c2 libcroco3 libglib2.0-0 libmagic1 libpipeline1 libunistring0 libxml2 man-db po-debconf Suggested packages: wamerican wordlist whois vacation dh-make apparmor-easyprof gettext-doc groff libio-async-perl libjson-perl libjson-xs-perl libnet-ssleay-perl libpoe-perl libtask-weaken-perl less www-browser libmail-box-perl Recommended packages: curl wget lynx-cur libasprintf-dev libgettextpo-dev libasync-interrupt-perl libglib2.0-data shared-mime-info xdg-user-dirs xml-core libmail-sendmail-perl The following NEW packages will be installed: bsdmainutils debhelper dh-apparmor file gettext gettext-base groff-base intltool-debian libanyevent-perl libasprintf0c2 libcommon-sense-perl libcroco3 libev-perl libevent-perl libglib2.0-0 libguard-perl libmagic1 libpipeline1 libunistring0 libxml2 man-db po-debconf 0 upgraded, 22 newly installed, 0 to remove and 0 not upgraded. Need to get 6970 kB of archives. After this operation, 26.0 MB of additional disk space will be used. Get:1 http://ftpmaster.internal/ubuntu/ vivid/main libmagic1 powerpc 1:5.19-1ubuntu1.1 [200 kB] Get:2 http://ftpmaster.internal/ubuntu/ vivid/main libasprintf0c2 powerpc 0.19.2-2ubuntu1 [6384 B] Get:3 http://ftpmaster.internal/ubuntu/ vivid/main libglib2.0-0 powerpc 2.42.0-2 [950 kB] Get:4 http://ftpmaster.internal/ubuntu/ vivid/main libpipeline1 powerpc 1.3.1-1 [22.3 kB] Get:5 http://ftpmaster.internal/ubuntu/ vivid/main libxml2 powerpc 2.9.1+dfsg1-4ubuntu1 [483 kB] Get:6 http://ftpmaster.internal/ubuntu/ vivid/main groff-base powerpc 1.22.2-8 [1217 kB] Get:7 http://ftpmaster.internal/ubuntu/ vivid/main bsdmainutils powerpc 9.0.5ubuntu1 [202 kB] Get:8 http://ftpmaster.internal/ubuntu/ vivid/main man-db powerpc 2.7.0.2-2 [839 kB] Get:9 http://ftpmaster.internal/ubuntu/ vivid/main libcroco3 powerpc 0.6.8-3 [70.7 kB] Get:10 http://ftpmaster.internal/ubuntu/ vivid/main libunistring0 powerpc 0.9.3-5ubuntu3 [252 kB] Get:11 http://ftpmaster.internal/ubuntu/ vivid/main file powerpc 1:5.19-1ubuntu1.1 [20.0 kB] Get:12 http://ftpmaster.internal/ubuntu/ vivid/main gettext-base powerpc 0.19.2-2ubuntu1 [44.9 kB] Get:13 http://ftpmaster.internal/ubuntu/ vivid/main gettext powerpc 0.19.2-2ubuntu1 [795 kB] Get:14 http://ftpmaster.internal/ubuntu/ vivid/main intltool-debian all 0.35.0+20060710.1 [31.6 kB] Get:15 http://ftpmaster.internal/ubuntu/ vivid/main po-debconf all 1.0.16+nmu3 [207 kB] Get:16 http://ftpmaster.internal/ubuntu/ vivid/main dh-apparmor all 2.8.98-0ubuntu2 [11.0 kB] Get:17 http://ftpmaster.internal/ubuntu/ vivid/main debhelper all 9.20141003ubuntu1 [726 kB] Get:18 http://ftpmaster.internal/ubuntu/ vivid-proposed/universe libanyevent-perl powerpc 7.070-3 [379 kB] Get:19 http://ftpmaster.internal/ubuntu/ vivid-proposed/main libcommon-sense-perl powerpc 3.73-2 [20.7 kB] Get:20 http://ftpmaster.internal/ubuntu/ vivid/universe libev-perl powerpc 4.17-1build1 [227 kB] Get:21 http://ftpmaster.internal/ubuntu/ vivid/universe libevent-perl powerpc 1.23-1build1 [250 kB] Get:22 http://ftpmaster.internal/ubuntu/ vivid/universe libguard-perl powerpc 1.022-2build1 [15.4 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 6970 kB in 7s (940 kB/s) Selecting previously unselected package libmagic1:powerpc. (Reading database ... 11350 files and directories currently installed.) Preparing to unpack .../libmagic1_1%3a5.19-1ubuntu1.1_powerpc.deb ... Unpacking libmagic1:powerpc (1:5.19-1ubuntu1.1) ... Selecting previously unselected package libasprintf0c2:powerpc. Preparing to unpack .../libasprintf0c2_0.19.2-2ubuntu1_powerpc.deb ... Unpacking libasprintf0c2:powerpc (0.19.2-2ubuntu1) ... Selecting previously unselected package libglib2.0-0:powerpc. Preparing to unpack .../libglib2.0-0_2.42.0-2_powerpc.deb ... Unpacking libglib2.0-0:powerpc (2.42.0-2) ... Selecting previously unselected package libpipeline1:powerpc. Preparing to unpack .../libpipeline1_1.3.1-1_powerpc.deb ... Unpacking libpipeline1:powerpc (1.3.1-1) ... Selecting previously unselected package libxml2:powerpc. Preparing to unpack .../libxml2_2.9.1+dfsg1-4ubuntu1_powerpc.deb ... Unpacking libxml2:powerpc (2.9.1+dfsg1-4ubuntu1) ... Selecting previously unselected package groff-base. Preparing to unpack .../groff-base_1.22.2-8_powerpc.deb ... Unpacking groff-base (1.22.2-8) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../bsdmainutils_9.0.5ubuntu1_powerpc.deb ... Unpacking bsdmainutils (9.0.5ubuntu1) ... Selecting previously unselected package man-db. Preparing to unpack .../man-db_2.7.0.2-2_powerpc.deb ... Unpacking man-db (2.7.0.2-2) ... Selecting previously unselected package libcroco3:powerpc. Preparing to unpack .../libcroco3_0.6.8-3_powerpc.deb ... Unpacking libcroco3:powerpc (0.6.8-3) ... Selecting previously unselected package libunistring0:powerpc. Preparing to unpack .../libunistring0_0.9.3-5ubuntu3_powerpc.deb ... Unpacking libunistring0:powerpc (0.9.3-5ubuntu3) ... Selecting previously unselected package file. Preparing to unpack .../file_1%3a5.19-1ubuntu1.1_powerpc.deb ... Unpacking file (1:5.19-1ubuntu1.1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../gettext-base_0.19.2-2ubuntu1_powerpc.deb ... Unpacking gettext-base (0.19.2-2ubuntu1) ... Selecting previously unselected package gettext. Preparing to unpack .../gettext_0.19.2-2ubuntu1_powerpc.deb ... Unpacking gettext (0.19.2-2ubuntu1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../intltool-debian_0.35.0+20060710.1_all.deb ... Unpacking intltool-debian (0.35.0+20060710.1) ... Selecting previously unselected package po-debconf. Preparing to unpack .../po-debconf_1.0.16+nmu3_all.deb ... Unpacking po-debconf (1.0.16+nmu3) ... Selecting previously unselected package dh-apparmor. Preparing to unpack .../dh-apparmor_2.8.98-0ubuntu2_all.deb ... Unpacking dh-apparmor (2.8.98-0ubuntu2) ... Selecting previously unselected package debhelper. Preparing to unpack .../debhelper_9.20141003ubuntu1_all.deb ... Unpacking debhelper (9.20141003ubuntu1) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../libanyevent-perl_7.070-3_powerpc.deb ... Unpacking libanyevent-perl (7.070-3) ... Selecting previously unselected package libcommon-sense-perl. Preparing to unpack .../libcommon-sense-perl_3.73-2_powerpc.deb ... Unpacking libcommon-sense-perl (3.73-2) ... Selecting previously unselected package libev-perl. Preparing to unpack .../libev-perl_4.17-1build1_powerpc.deb ... Unpacking libev-perl (4.17-1build1) ... Selecting previously unselected package libevent-perl. Preparing to unpack .../libevent-perl_1.23-1build1_powerpc.deb ... Unpacking libevent-perl (1.23-1build1) ... Selecting previously unselected package libguard-perl. Preparing to unpack .../libguard-perl_1.022-2build1_powerpc.deb ... Unpacking libguard-perl (1.022-2build1) ... Setting up libmagic1:powerpc (1:5.19-1ubuntu1.1) ... Setting up libasprintf0c2:powerpc (0.19.2-2ubuntu1) ... Setting up libglib2.0-0:powerpc (2.42.0-2) ... No schema files found: doing nothing. Setting up libpipeline1:powerpc (1.3.1-1) ... Setting up libxml2:powerpc (2.9.1+dfsg1-4ubuntu1) ... Setting up groff-base (1.22.2-8) ... Setting up bsdmainutils (9.0.5ubuntu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up man-db (2.7.0.2-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libcroco3:powerpc (0.6.8-3) ... Setting up libunistring0:powerpc (0.9.3-5ubuntu3) ... Setting up file (1:5.19-1ubuntu1.1) ... Setting up gettext-base (0.19.2-2ubuntu1) ... Setting up gettext (0.19.2-2ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16+nmu3) ... Setting up dh-apparmor (2.8.98-0ubuntu2) ... Setting up debhelper (9.20141003ubuntu1) ... Setting up libanyevent-perl (7.070-3) ... Setting up libcommon-sense-perl (3.73-2) ... Setting up libev-perl (4.17-1build1) ... Setting up libevent-perl (1.23-1build1) ... Setting up libguard-perl (1.022-2build1) ... Processing triggers for libc-bin (2.19-10ubuntu2) ... Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.19-10ubuntu2 make_4.0-8 dpkg-dev_1.17.13ubuntu1 gcc-4.9_4.9.1-19ubuntu1 g++-4.9_4.9.1-19ubuntu1 binutils_2.24.90.20141023-1ubuntu1 libstdc++-4.9-dev_4.9.1-19ubuntu1 libstdc++6_4.9.1-19ubuntu1 ------------------------------------------------------------------------------ dpkg-source: warning: -sn is not a valid option for Dpkg::Source::Package::V3::Quilt gpgv: Signature made Mon Sep 15 17:40:23 2014 UTC using RSA key ID 8649AA06 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./libcoro-perl_6.410-1.dsc dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.410 dpkg-source: info: unpacking libcoro-perl_6.410.orig.tar.gz dpkg-source: info: unpacking libcoro-perl_6.410-1.debian.tar.xz dpkg-source: info: applying fix-wrong-path-for-interpreter.patch dpkg-source: info: applying whatis.patch dpkg-source: info: applying spelling.patch dpkg-source: info: applying fix-ftbfs-with-longjmp.patch dpkg-buildpackage: source package libcoro-perl dpkg-buildpackage: source version 6.410-1 dpkg-buildpackage: source distribution unstable dpkg-source --before-build libcoro-perl-6.410 dpkg-buildpackage: host architecture powerpc /usr/bin/fakeroot debian/rules clean dh clean dh_testdir dh_auto_clean dh_clean debian/rules build-arch dh build-arch dh_testdir -a dh_auto_configure -a *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Event version 1.23 found, building Event support. EV version 4.17 found, building EV support. Checking if your kit is complete... Looks good *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has a number of configuration options. Due to its maturity, the defaults that Coro chooses are usually fine, so you can decide to skip these questions. Only if something went wrong you should select 'n' here and manually configure Coro, and, of course, report this to the maintainer :) Skip further questions and use defaults (y/n)? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a number of methods to implement coroutines at the C level. The default chosen is based on your current confguration and is correct in most cases, but you still can chose between these alternatives: u The unix 'ucontext.h' functions are relatively new and not implemented or well-tested in older unices. They allow very fast coroutine creation and reasonably fast switching. They are, however, usually slower than the other alternatives due to an extra syscall done by swapcontext. And while nominally most portable (it's the only POSIX-standardised interface for coroutines), ucontext functions are, as usual, broken on most/all BSDs. s If the ucontext functions are not working or you don't want to use them for other reasons you can try a workaround using setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine creation is rather slow, but switching is very fast (often much faster than with the ucontext functions). Unfortunately, glibc-2.1 and below don't even feature a working sigaltstack. You cannot use this implementation if some other code uses SIGUSR2 or you plan to create coroutines from an alternative signal stack, as both are being used for coroutine creation. a Handcoded assembly. This is the fastest and most compatible method, with the least side effects, if it works, that is. It has been tested on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64 systems using the SVR ELF ABI (it is also reported to be working on Strawberry Perl for Windows using MinGW). This is the recommended method on supported platforms. When it doesn't work, use another method, such as (s)etjmp/longjmp. l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need this hack. Since it is very linux-specific it is also quite fast and recommended even for newer versions; when it works, that is (currently x86 and a few others only. If it compiles, it's usually ok). Newer glibc versions (>= 2.5) stop working with this implementation however. i IRIX. For some reason, SGI really does not like to follow POSIX (does that surprise you?), so this workaround might be needed (it's fast), although [s] and [u] should also work now. w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry Perl), although, as there is no standard on how to do this under windows, different environments might work differently. Doh. f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower and uses a lot more memory, but should be working all the time. p Use pthread API. Try to avoid this option, it was only created to make a point about the programming language shootout. It is unlikely to work with perls that have windows process emulation enabled ("perl threads"). It is also likely the slowest method of implementing coroutines. It might work fine as a last resort, however, as the pthread API is slightly better tested than ucontext functions for example. Of course, not on BSDs, who usually have very broken pthread implementations. Coro tries hard to come up with a suitable default for most systems, so pressing return at the prompt usually does the right thing. If you experience problems (e.g. make test fails) then you should experiment with this setting. Use which implementation, etjmp, ctx, sm, rix, inux,

threads, indows, iber? [s] s Using setjmp/longjmp/sigaltstack implementation Trying to detect stack growth direction (for TEST_sigaltstack) You might see some warnings, this should not concern you. ***************************************************************************** If the testsuite fails PLEASE provide the following information to Marc Lehmann : operating system name, version, architecture name and this string '(skaddr)|(sksize)'. Thanks a lot! ***************************************************************************** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Per-context stack size factor: Depending on your settings, Coro tries to share the C stacks is creates as much as possible, but sometimes it needs to allocate a new one. This setting controls the maximum size that gets allocated, and should not be set too high, as memory and address space still is wasted even if it's not fully used. The value entered will be multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8 on 64-bit systems. A setting of 16384 (the default) therefore corresponds to a 64k..128k stack, which usually is ample space (you might even want to try 8192 or lower if your program creates many coroutines). On systems supporting mmap and dynamic memory management, the actual memory usually gets allocated on demand, but with many large stacks you can still run out of address space on your typical 32 bit platform (not to forget the pagetables). Some perls (mostly threaded ones and perl compiled under linux 2.6) and some programs (inefficient regexes can use a lot of stack space) may need much, much more: If Coro segfaults with weird backtraces (e.g. in a function prologue) or in t/10_bugs.t, you might want to increase this to 65536 or more. The default should be fine, and can be changed at runtime with Coro::State::cctx_stacksize. C stack size factor? [16384] 16384 using a stacksize of 16384 * sizeof(void*) *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can optionally put a guard area before each stack segment: When the stack is too small and the access is not too far outside the stack (i.e. within the guard area), then the program will safely segfault instead of running into other data. The cost is some additional overhead with is usually negligible, and extra use of address space. The guard area size currently needs to be specified in pages (typical pagesizes are 4k and 8k). The guard area is only enabled on a few hardcoded architectures and is ignored on others. The actual preprocessor expression disables this feature if: !__i386 && !__x86_64 && !__powerpc && !__m68k && !__alpha && !__mips && !__sparc64 The default, as usual, should be just fine. Number of guard pages (0 disables)? [4] 4 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can tell valgrind about its stacks and so reduce spurious warnings where valgrind would otherwise complain about possible stack switches. Enabling this does not incur noticable runtime or memory overhead, but it requires that you have the header file available. Valgrind support is completely optional, so disabling it is the safe choice. Enable valgrind support (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use (or even trick) some perl functions into doing what it needs instead of relying on (some) of its own functions. This might increase chances that it compiles and works, but it could just as well result in memory leaks, crashes or silent data corruption. It certainly does result in slightly slower speed and higher memory consumption, though, so YOU SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT. Prefer perl functions over coro functions (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a simple JIT compiler to compile a part of the thread switch function at runtime. On perls with windows process emulation (most!), this results in a 50% speed improvement. On sane perls, the gain is much less, usually around 5%. If you enable this option, then the JIT will be enabled, on compatible operating systems and CPUs (currently only x86/amd64 on certain unix clones). Otherwise, it will be disabled. It should be safe to leave on - this setting is only here so you can switch it off in case of problems. Note that some broken kernels (often calling themselves "hardened") break all JIT generation by manipulating some system calls. If you get bus errors or segmentation faults immediately when the JIT is enabled but not without, then note that disabling the JIT only fixes some symptoms, not the underlying problem, and you might run into other problems later. Try to use the JIT compiler, if available? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has experimental support for cloning states. This can be used to implement a scheme-like call/cc. However, this doesn't add to the expressiveness in general, and is likely perl-version specific (and perl 5.12 deliberately removed support for it). As such, it is disabled by default. Enable it when you want to play around with it, but note that it isn't supported, and unlikely ever will be. It exists mainly to prove that it could be done - if only it were useful for something. Implement Coro::State->clone method (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Generating a Unix-style Makefile Writing Makefile for Coro::State Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro::Event Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro::EV Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro Writing MYMETA.yml and MYMETA.json dh_auto_build -a make[1]: Entering directory '/build/buildd/libcoro-perl-6.410' cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm cp Coro/Util.pm blib/lib/Coro/Util.pm cp Coro/Channel.pm blib/lib/Coro/Channel.pm cp Coro/LWP.pm blib/lib/Coro/LWP.pm cp Coro/Signal.pm blib/lib/Coro/Signal.pm cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h cp Coro/Socket.pm blib/lib/Coro/Socket.pm cp Coro/Timer.pm blib/lib/Coro/Timer.pm cp Coro/Specific.pm blib/lib/Coro/Specific.pm cp Coro.pm blib/lib/Coro.pm cp Coro/Storable.pm blib/lib/Coro/Storable.pm cp Coro/Debug.pm blib/lib/Coro/Debug.pm cp Coro/State.pm blib/lib/Coro/State.pm cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm cp Coro/AIO.pm blib/lib/Coro/AIO.pm cp Coro/Select.pm blib/lib/Coro/Select.pm cp Coro/BDB.pm blib/lib/Coro/BDB.pm cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl cp Coro/Handle.pm blib/lib/Coro/Handle.pm cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/Coro' Skip ../blib/lib/Coro/RWLock.pm (unchanged) Skip ../blib/lib/Coro/Debug.pm (unchanged) Skip ../blib/lib/Coro/Util.pm (unchanged) Skip ../blib/lib/Coro/AnyEvent.pm (unchanged) Skip ../blib/lib/Coro/Select.pm (unchanged) Skip ../blib/lib/Coro/Handle.pm (unchanged) Skip ../blib/lib/Coro/MakeMaker.pm (unchanged) Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged) Skip ../blib/lib/Coro/LWP.pm (unchanged) Skip ../blib/lib/Coro/Socket.pm (unchanged) Skip ../blib/lib/Coro/Storable.pm (unchanged) Skip ../blib/lib/Coro/Signal.pm (unchanged) Skip ../blib/lib/Coro/State.pm (unchanged) Skip ../blib/lib/Coro/Specific.pm (unchanged) cp Intro.pod ../blib/lib/Coro/Intro.pod Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged) Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged) Skip ../blib/lib/Coro/AIO.pm (unchanged) Skip ../blib/lib/Coro/Semaphore.pm (unchanged) Skip ../blib/lib/Coro/Channel.pm (unchanged) Skip ../blib/lib/Coro/Timer.pm (unchanged) Skip ../blib/lib/Coro/BDB.pm (unchanged) Running Mkbootstrap for Coro::State () chmod 644 State.bs /usr/bin/perl /usr/share/perl/5.20.1/ExtUtils/xsubpp -typemap /usr/share/perl/5.20/ExtUtils/typemap -typemap typemap State.xs > State.xsc && mv State.xsc State.c Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3669 cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -DVERSION=\"6.41\" -DXS_VERSION=\"6.41\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.20/CORE" -DCORO_SJLJ -D_FORTIFY_SOURCE=0 -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c :0:0: warning: "_FORTIFY_SOURCE" redefined :0:0: note: this is the location of the previous definition In file included from /usr/lib/powerpc-linux-gnu/perl/5.20/CORE/perl.h:5089:0, from State.xs:12: State.xs: In function 'boot_Coro__State': State.xs:3851:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] sv_setiv (sv, (IV)&coroapi); ^ /usr/lib/powerpc-linux-gnu/perl/5.20/CORE/embed.h:628:46: note: in definition of macro 'sv_setiv' #define sv_setiv(a,b) Perl_sv_setiv(aTHX_ a,b) ^ rm -f ../blib/arch/auto/Coro/State/State.so cc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector State.o -o ../blib/arch/auto/Coro/State/State.so \ \ chmod 755 ../blib/arch/auto/Coro/State/State.so /usr/bin/perl -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying ../blib/man3/Coro::AIO.3pm Manifying ../blib/man3/Coro::AnyEvent.3pm Manifying ../blib/man3/Coro::BDB.3pm Manifying ../blib/man3/Coro::Channel.3pm Manifying ../blib/man3/Coro::Debug.3pm Manifying ../blib/man3/Coro::Handle.3pm Manifying ../blib/man3/Coro::Intro.3pm Manifying ../blib/man3/Coro::LWP.3pm Manifying ../blib/man3/Coro::MakeMaker.3pm Manifying ../blib/man3/Coro::RWLock.3pm Manifying ../blib/man3/Coro::Select.3pm Manifying ../blib/man3/Coro::Semaphore.3pm Manifying ../blib/man3/Coro::SemaphoreSet.3pm Manifying ../blib/man3/Coro::Signal.3pm Manifying ../blib/man3/Coro::Socket.3pm Manifying ../blib/man3/Coro::Specific.3pm Manifying ../blib/man3/Coro::State.3pm Manifying ../blib/man3/Coro::Storable.3pm Manifying ../blib/man3/Coro::Timer.3pm Manifying ../blib/man3/Coro::Util.3pm make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/Coro' make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/Event' cp Event.pm ../blib/lib/Coro/Event.pm Running Mkbootstrap for Coro::Event () chmod 644 Event.bs /usr/bin/perl /usr/share/perl/5.20.1/ExtUtils/xsubpp -typemap /usr/share/perl/5.20/ExtUtils/typemap Event.xs > Event.xsc && mv Event.xsc Event.c cc -c -I/usr/lib/powerpc-linux-gnu/perl5/5.20/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -DVERSION=\"6.41\" -DXS_VERSION=\"6.41\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.20/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c In file included from Event.xs:8:0: Event.xs: In function 'boot_Coro__Event': /usr/lib/powerpc-linux-gnu/perl5/5.20/Event/EventAPI.h:252:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] GEventAPI = (struct EventAPI*) SvIV(sv); \ ^ Event.xs:82:9: note: in expansion of macro 'I_EVENT_API' I_EVENT_API ("Coro::Event"); ^ /usr/lib/powerpc-linux-gnu/perl5/5.20/Event/EventAPI.h:252:23: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32' [-Wformat=] GEventAPI = (struct EventAPI*) SvIV(sv); \ ^ Event.xs:82:9: note: in expansion of macro 'I_EVENT_API' I_EVENT_API ("Coro::Event"); ^ In file included from Event.xs:9:0: ../Coro/CoroAPI.h:98:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] GCoroAPI = (struct CoroAPI*) SvIV (sv); \ ^ Event.xs:83:2: note: in expansion of macro 'I_CORO_API' I_CORO_API ("Coro::Event"); ^ rm -f ../blib/arch/auto/Coro/Event/Event.so cc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector Event.o -o ../blib/arch/auto/Coro/Event/Event.so \ \ chmod 755 ../blib/arch/auto/Coro/Event/Event.so /usr/bin/perl -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying ../blib/man3/Coro::Event.3pm make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/Event' make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/EV' cp EV.pm ../blib/lib/Coro/EV.pm Running Mkbootstrap for Coro::EV () chmod 644 EV.bs /usr/bin/perl /usr/share/perl/5.20.1/ExtUtils/xsubpp -typemap /usr/share/perl/5.20/ExtUtils/typemap EV.xs > EV.xsc && mv EV.xsc EV.c cc -c -I/usr/lib/powerpc-linux-gnu/perl5/5.20/EV -I/usr/lib/powerpc-linux-gnu/perl5/5.20 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -DVERSION=\"6.41\" -DXS_VERSION=\"6.41\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.20/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c In file included from EV.xs:9:0: EV.xs: In function 'boot_Coro__EV': /usr/lib/powerpc-linux-gnu/perl5/5.20/EV/EVAPI.h:195:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] GEVAPI = (struct EVAPI*) SvIV (sv); \ ^ EV.xs:294:9: note: in expansion of macro 'I_EV_API' I_EV_API ("Coro::EV"); ^ In file included from EV.xs:10:0: ../Coro/CoroAPI.h:98:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] GCoroAPI = (struct CoroAPI*) SvIV (sv); \ ^ EV.xs:295:2: note: in expansion of macro 'I_CORO_API' I_CORO_API ("Coro::EV"); ^ rm -f ../blib/arch/auto/Coro/EV/EV.so cc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector EV.o -o ../blib/arch/auto/Coro/EV/EV.so \ \ chmod 755 ../blib/arch/auto/Coro/EV/EV.so /usr/bin/perl -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying ../blib/man3/Coro::EV.3pm make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/EV' Manifying blib/man3/Coro.3pm make[1]: Leaving directory '/build/buildd/libcoro-perl-6.410' dh_auto_test -a make[1]: Entering directory '/build/buildd/libcoro-perl-6.410' make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/Coro' Running Mkbootstrap for Coro::State () chmod 644 State.bs make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/Coro' make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/Event' Running Mkbootstrap for Coro::Event () chmod 644 Event.bs make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/Event' make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/EV' Running Mkbootstrap for Coro::EV () chmod 644 EV.bs make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/EV' PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_basic.t .......... ok t/01_process.t ........ ok t/02_channel.t ........ ok t/03_channel.t ........ ok t/04_rwlock.t ......... ok t/05_specific.t ....... ok t/06_prio.t ........... ok t/07_eval.t ........... ok t/08_join.t ........... ok t/10_bugs.t ........... ok t/11_deadlock.t ....... ok t/12_exit.t ........... ok t/13_diewarn.t ........ ok t/14_load.t ........... ok t/15_semaphore.t ...... ok t/16_signal.t ......... ok t/17_rouse.t .......... ok t/18_winder.t ......... ok t/19_handle.t ......... ok t/20_mutual_cancel.t .. ok All tests successful. Files=20, Tests=196, 1 wallclock secs ( 0.08 usr 0.04 sys + 0.36 cusr 0.12 csys = 0.60 CPU) Result: PASS make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/Coro' No tests defined for Coro::State extension. make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/Coro' make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/Event' PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... ok t/01_unblock.t .. ok All tests successful. Files=2, Tests=17, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.12 cusr 0.10 csys = 0.24 CPU) Result: PASS make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/Event' make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/EV' PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... ok t/01_unblock.t .. ok All tests successful. Files=2, Tests=17, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.08 cusr 0.08 csys = 0.18 CPU) Result: PASS make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/EV' make[1]: Leaving directory '/build/buildd/libcoro-perl-6.410' /usr/bin/fakeroot debian/rules binary-arch dh binary-arch dh_testroot -a dh_prep -a dh_auto_install -a make[1]: Entering directory '/build/buildd/libcoro-perl-6.410' make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/Coro' make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/Coro' make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/Event' make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/Event' make[2]: Entering directory '/build/buildd/libcoro-perl-6.410/EV' make[2]: Leaving directory '/build/buildd/libcoro-perl-6.410/EV' Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/auto/Coro/State/State.so Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/auto/Coro/Event/Event.so Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/auto/Coro/EV/EV.so Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Select.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/jit-x86-unix.pl Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/SemaphoreSet.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Timer.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/BDB.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/EV.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/MakeMaker.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/AIO.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/AnyEvent.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/State.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/jit-amd64-unix.pl Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/LWP.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Handle.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Signal.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Channel.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Socket.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Intro.pod Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Util.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/CoroAPI.h Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Semaphore.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/RWLock.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Specific.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Event.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Debug.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Storable.pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm Installing /build/buildd/libcoro-perl-6.410/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm make[1]: Leaving directory '/build/buildd/libcoro-perl-6.410' dh_installdocs -a dh_installchangelogs -a dh_installexamples -a dh_installman -a dh_perl -a dh_link -a dh_compress -a dh_fixperms -a dh_strip -a dh_strip debug symbol extraction: not enabling -a because /CurrentlyBuilding exists dh_strip debug symbol extraction: all non-arch-all packages for this build platform powerpc: libcoro-perl dh_strip debug symbol extraction: packages to act on: libcoro-perl dh_strip debug symbol extraction: ignored packages: Using buildid for compat level >= 9 dpkg-gencontrol: warning: -is is deprecated; it is without effect dpkg-gencontrol: warning: -ip is deprecated; it is without effect dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dpkg-gencontrol: warning: package libcoro-perl: unused substitution variable ${perl:Depends} /usr/bin/pkg_create_dbgsym: building ddeb package dpkg-deb: building package `libcoro-perl-dbgsym' in `../libcoro-perl-dbgsym_6.410-1_powerpc.ddeb'. dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dpkg-gencontrol: warning: package libcoro-perl: unused substitution variable ${misc:Pre-Depends} dh_md5sums -a dh_builddeb -a INFO: pkgstriptranslations version 121 pkgstriptranslations: processing libcoro-perl (in debian/libcoro-perl); do_strip: , oemstrip: pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libcoro-perl/DEBIAN/control, package libcoro-perl, directory debian/libcoro-perl pkgstripfiles: Truncating usr/share/doc/libcoro-perl/changelog.Debian.gz to topmost ten records pkgstripfiles: PNG optimization for package libcoro-perl took 0 s dpkg-deb: warning: 'debian/libcoro-perl/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `libcoro-perl' in `../libcoro-perl_6.410-1_powerpc.deb'. dpkg-genchanges -B -mUbuntu Build Daemon >../libcoro-perl_6.410-1_powerpc.changes dpkg-genchanges: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build libcoro-perl-6.410 dpkg-buildpackage: binary-only upload (no source included) ****************************************************************************** Build finished at 20141024-1712 Publishing debug debs. chroot-autobuild/build/buildd/libcoro-perl_6.410-1_powerpc.deb: new debian package, version 2.0. size 207902 bytes: control archive=3033 bytes. 1423 bytes, 27 lines control 5352 bytes, 67 lines md5sums Package: libcoro-perl Version: 6.410-1 Architecture: powerpc Maintainer: Ubuntu Developers Original-Maintainer: Debian Perl Group Installed-Size: 506 Depends: perl (>= 5.20.1-1), perlapi-5.20.1, libc6 (>= 2.4), libanyevent-perl, libcommon-sense-perl, libguard-perl Recommends: libanyevent-perl (>= 7), libev-perl, libevent-perl, libio-aio-perl (>= 3.1) Section: perl Priority: optional Homepage: https://metacpan.org/release/Coro Description: Perl framework implementing coroutines Coro is a collection of modules which manages continuations in general, most often in the form of cooperative threads (also called coros, or simply "coro" in the documentation). They do not actually execute at the same time, even on machines with multiple processors. . The specific flavor of thread offered by this module also guarantees you that it will not switch between threads unless necessary. It switches at easily- identified points in your program, so locking and parallel access are rarely an issue, making threaded programming much safer and easier than using other threading models. . Coro provides a full shared address space, which makes communication between threads very easy. A parallel matrix multiplication benchmark runs over 300 times faster on a single core than perl's ithreads on a quad core using all four cores. chroot-autobuild/build/buildd/libcoro-perl_6.410-1_powerpc.deb: drwxr-xr-x root/root 0 2014-10-24 17:12 ./ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/lib/ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/5.20/ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/5.20/auto/ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/5.20/auto/Coro/ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/5.20/auto/Coro/State/ -rw-r--r-- root/root 83900 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/5.20/auto/Coro/State/State.so drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/5.20/auto/Coro/Event/ -rw-r--r-- root/root 13736 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/5.20/auto/Coro/Event/Event.so drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/5.20/auto/Coro/EV/ -rw-r--r-- root/root 13756 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/5.20/auto/Coro/EV/EV.so drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/ -rw-r--r-- root/root 3787 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Select.pm -rwxr-xr-x root/root 2977 2014-10-24 17:11 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/jit-x86-unix.pl -rw-r--r-- root/root 4089 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/SemaphoreSet.pm -rw-r--r-- root/root 1617 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Timer.pm -rw-r--r-- root/root 1476 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/BDB.pm -rw-r--r-- root/root 2579 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/EV.pm -rw-r--r-- root/root 2506 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/MakeMaker.pm -rw-r--r-- root/root 4602 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/AIO.pm -rw-r--r-- root/root 13549 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/AnyEvent.pm -rw-r--r-- root/root 18990 2014-10-24 17:11 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/State.pm -rwxr-xr-x root/root 2769 2014-10-24 17:11 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/jit-amd64-unix.pl -rw-r--r-- root/root 3976 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/LWP.pm -rw-r--r-- root/root 13780 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Handle.pm -rw-r--r-- root/root 2254 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Signal.pm -rw-r--r-- root/root 4013 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Channel.pm -rw-r--r-- root/root 5431 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Socket.pm -rw-r--r-- root/root 26830 2014-10-24 17:11 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Intro.pod -rw-r--r-- root/root 5527 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Util.pm -rw-r--r-- root/root 3737 2012-07-02 16:08 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/CoroAPI.h -rw-r--r-- root/root 4366 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Semaphore.pm -rw-r--r-- root/root 2140 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/RWLock.pm -rw-r--r-- root/root 1790 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Specific.pm -rw-r--r-- root/root 5391 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Event.pm -rw-r--r-- root/root 16417 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Debug.pm -rw-r--r-- root/root 3724 2014-09-06 16:10 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro/Storable.pm -rw-r--r-- root/root 45318 2014-10-24 17:11 ./usr/lib/powerpc-linux-gnu/perl5/5.20/Coro.pm drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/share/ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/share/man/ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/share/man/man3/ -rw-r--r-- root/root 2715 2014-10-24 17:12 ./usr/share/man/man3/Coro::MakeMaker.3pm.gz -rw-r--r-- root/root 2410 2014-10-24 17:12 ./usr/share/man/man3/Coro::BDB.3pm.gz -rw-r--r-- root/root 2863 2014-10-24 17:12 ./usr/share/man/man3/Coro::Socket.3pm.gz -rw-r--r-- root/root 2817 2014-10-24 17:12 ./usr/share/man/man3/Coro::Storable.3pm.gz -rw-r--r-- root/root 4567 2014-10-24 17:12 ./usr/share/man/man3/Coro::Debug.3pm.gz -rw-r--r-- root/root 3536 2014-10-24 17:12 ./usr/share/man/man3/Coro::Event.3pm.gz -rw-r--r-- root/root 12328 2014-10-24 17:12 ./usr/share/man/man3/Coro::Intro.3pm.gz -rw-r--r-- root/root 2881 2014-10-24 17:12 ./usr/share/man/man3/Coro::SemaphoreSet.3pm.gz -rw-r--r-- root/root 2656 2014-10-24 17:12 ./usr/share/man/man3/Coro::Signal.3pm.gz -rw-r--r-- root/root 3340 2014-10-24 17:12 ./usr/share/man/man3/Coro::Semaphore.3pm.gz -rw-r--r-- root/root 2482 2014-10-24 17:12 ./usr/share/man/man3/Coro::Specific.3pm.gz -rw-r--r-- root/root 3254 2014-10-24 17:12 ./usr/share/man/man3/Coro::Util.3pm.gz -rw-r--r-- root/root 3397 2014-10-24 17:12 ./usr/share/man/man3/Coro::LWP.3pm.gz -rw-r--r-- root/root 6181 2014-10-24 17:12 ./usr/share/man/man3/Coro::AnyEvent.3pm.gz -rw-r--r-- root/root 2373 2014-10-24 17:12 ./usr/share/man/man3/Coro::RWLock.3pm.gz -rw-r--r-- root/root 3316 2014-10-24 17:12 ./usr/share/man/man3/Coro::Channel.3pm.gz -rw-r--r-- root/root 9392 2014-10-24 17:12 ./usr/share/man/man3/Coro::State.3pm.gz -rw-r--r-- root/root 3590 2014-10-24 17:12 ./usr/share/man/man3/Coro::AIO.3pm.gz -rw-r--r-- root/root 18119 2014-10-24 17:12 ./usr/share/man/man3/Coro.3pm.gz -rw-r--r-- root/root 2349 2014-10-24 17:12 ./usr/share/man/man3/Coro::Timer.3pm.gz -rw-r--r-- root/root 2865 2014-10-24 17:12 ./usr/share/man/man3/Coro::Select.3pm.gz -rw-r--r-- root/root 2885 2014-10-24 17:12 ./usr/share/man/man3/Coro::EV.3pm.gz -rw-r--r-- root/root 3960 2014-10-24 17:12 ./usr/share/man/man3/Coro::Handle.3pm.gz drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/share/doc/ drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/share/doc/libcoro-perl/ -rw-r--r-- root/root 957 2014-10-24 17:12 ./usr/share/doc/libcoro-perl/changelog.Debian.gz -rw-r--r-- root/root 6874 2014-09-15 13:39 ./usr/share/doc/libcoro-perl/copyright -rw-r--r-- root/root 1207 2008-03-02 11:10 ./usr/share/doc/libcoro-perl/README.linux-glibc -rw-r--r-- root/root 277 2005-03-03 12:20 ./usr/share/doc/libcoro-perl/README -rw-r--r-- root/root 227 2014-09-15 13:39 ./usr/share/doc/libcoro-perl/NEWS.Debian.gz drwxr-xr-x root/root 0 2014-10-24 17:12 ./usr/share/doc/libcoro-perl/examples/ -rw-r--r-- root/root 1714 2011-12-12 10:18 ./usr/share/doc/libcoro-perl/examples/bench -rw-r--r-- root/root 665 2006-11-06 14:40 ./usr/share/doc/libcoro-perl/examples/prodcons2 -rw-r--r-- root/root 618 2001-07-16 20:24 ./usr/share/doc/libcoro-perl/examples/prodcons1 -rw-r--r-- root/root 620 2006-11-06 14:40 ./usr/share/doc/libcoro-perl/examples/prodcons3 -rw-r--r-- root/root 316 2008-11-23 23:56 ./usr/share/doc/libcoro-perl/examples/dns -rw-r--r-- root/root 752 2007-04-14 11:06 ./usr/share/doc/libcoro-perl/examples/readline -rw-r--r-- root/root 240 2001-07-22 22:14 ./usr/share/doc/libcoro-perl/examples/attributes -rw-r--r-- root/root 3188 2008-06-03 09:35 ./usr/share/doc/libcoro-perl/examples/myhttpd.gz -rw-r--r-- root/root 1222 2008-11-23 23:56 ./usr/share/doc/libcoro-perl/examples/event -rw-r--r-- root/root 526 2008-11-24 02:55 ./usr/share/doc/libcoro-perl/examples/lwp libcoro-perl_6.410-1_powerpc.changes: Format: 1.8 Date: Mon, 15 Sep 2014 19:39:11 +0200 Source: libcoro-perl Binary: libcoro-perl Architecture: powerpc Version: 6.410-1 Distribution: vivid-proposed Urgency: medium Maintainer: Ubuntu Build Daemon Changed-By: gregor herrmann Description: libcoro-perl - Perl framework implementing coroutines Changes: libcoro-perl (6.410-1) unstable; urgency=medium . [ Salvatore Bonaccorso ] * Update Vcs-Browser URL to cgit web frontend . [ gregor herrmann ] * New upstream release. * Refresh fix-ftbfs-with-longjmp.patch (offset). Checksums-Sha1: 73290c74dcf3a590fe50f6d3c26ead4807d92114 207902 libcoro-perl_6.410-1_powerpc.deb Checksums-Sha256: 6e9d731e174d4437171fd4d76bac232255e2a13efdc8d28111976b436d476eeb 207902 libcoro-perl_6.410-1_powerpc.deb Files: 21f4eb0bc1dadcd736a47c2c440d6c4b 207902 perl optional libcoro-perl_6.410-1_powerpc.deb ****************************************************************************** Built successfully ****************************************************************************** Finished at 20141024-1712 Build needed 00:00:15, 4156k disk space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['scan-for-processes', 'PACKAGEBUILD-6493150'] Scanning for processes to kill in build /home/buildd/build-PACKAGEBUILD-6493150/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', 'PACKAGEBUILD-6493150'] Unmounting chroot for build PACKAGEBUILD-6493150... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', 'PACKAGEBUILD-6493150'] Removing build PACKAGEBUILD-6493150