https://launchpad.net/ubuntu/+source/libcoro-perl/6.520-1build1/+build/15602599 RUN: /usr/share/launchpad-buildd/slavebin/slave-prep Forking launchpad-buildd slave process... Kernel version: Linux lcy01-amd64-029 4.4.0-138-generic #164-Ubuntu SMP Tue Oct 2 17:16:02 UTC 2018 x86_64 Buildd toolchain package versions: launchpad-buildd_165 python-lpbuildd_165 sbuild_0.67.0-2ubuntu7.1 bzr-builder_0.7.3+bzr174~ppa13~ubuntu14.10.1 bzr_2.7.0-2ubuntu3.1 git-build-recipe_0.3.4~git201611291343.dcee459~ubuntu16.04.1 git_1:2.7.4-0ubuntu1.5 dpkg-dev_1.18.4ubuntu1.5 python-debian_0.1.27ubuntu2. Syncing the system clock with the buildd NTP service... 3 Nov 11:10:24 ntpdate[1815]: adjust time server 10.211.37.1 offset 0.000353 sec RUN: /usr/share/launchpad-buildd/slavebin/in-target unpack-chroot --backend=chroot --series=disco --arch=amd64 PACKAGEBUILD-15602599 /home/buildd/filecache-default/b71572c9405b6ce6ff1d1ad001cf764bb07f52ae Creating target for build PACKAGEBUILD-15602599 RUN: /usr/share/launchpad-buildd/slavebin/in-target mount-chroot --backend=chroot --series=disco --arch=amd64 PACKAGEBUILD-15602599 Starting target for build PACKAGEBUILD-15602599 RUN: /usr/share/launchpad-buildd/slavebin/in-target override-sources-list --backend=chroot --series=disco --arch=amd64 PACKAGEBUILD-15602599 'deb http://ftpmaster.internal/ubuntu disco main universe' 'deb http://ftpmaster.internal/ubuntu disco-security main universe' 'deb http://ftpmaster.internal/ubuntu disco-updates main universe' 'deb http://ftpmaster.internal/ubuntu disco-proposed main universe' Overriding sources.list in build-PACKAGEBUILD-15602599 RUN: /usr/share/launchpad-buildd/slavebin/in-target update-debian-chroot --backend=chroot --series=disco --arch=amd64 PACKAGEBUILD-15602599 Updating target for build PACKAGEBUILD-15602599 Get:1 http://ftpmaster.internal/ubuntu disco InRelease [243 kB] Get:2 http://ftpmaster.internal/ubuntu disco-security InRelease [65.4 kB] Get:3 http://ftpmaster.internal/ubuntu disco-updates InRelease [65.4 kB] Get:4 http://ftpmaster.internal/ubuntu disco-proposed InRelease [93.2 kB] Get:5 http://ftpmaster.internal/ubuntu disco/main amd64 Packages [1019 kB] Get:6 http://ftpmaster.internal/ubuntu disco/main Translation-en [513 kB] Get:7 http://ftpmaster.internal/ubuntu disco/universe amd64 Packages [8789 kB] Get:8 http://ftpmaster.internal/ubuntu disco/universe Translation-en [5057 kB] Get:9 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 Packages [57.9 kB] Get:10 http://ftpmaster.internal/ubuntu disco-proposed/main Translation-en [35.0 kB] Get:11 http://ftpmaster.internal/ubuntu disco-proposed/universe amd64 Packages [296 kB] Get:12 http://ftpmaster.internal/ubuntu disco-proposed/universe Translation-en [180 kB] Fetched 16.4 MB in 4s (3666 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: libgdbm5 libperl5.26 perl-modules-5.26 Use 'sudo apt autoremove' to remove them. The following NEW packages will be installed: libgdbm6 libperl5.28 perl-modules-5.28 The following packages will be upgraded: base-files binutils binutils-common binutils-x86-64-linux-gnu cpp cpp-8 dmsetup g++ g++-8 gcc gcc-8 gcc-8-base libapparmor1 libasan5 libatomic1 libbinutils libcap-ng0 libcc1-0 libdevmapper1.02.1 libgcc-8-dev libgcc1 libgdbm-compat4 libgomp1 libitm1 libkmod2 liblsan0 libmpx2 libquadmath0 libstdc++-8-dev libstdc++6 libtsan0 libubsan1 linux-libc-dev perl perl-base tzdata 36 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 41.3 MB of archives. After this operation, 48.6 MB of additional disk space will be used. Get:1 http://ftpmaster.internal/ubuntu disco/main amd64 base-files amd64 10.1ubuntu8 [60.1 kB] Get:2 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 perl-modules-5.28 all 5.28.0-3 [2818 kB] Get:3 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 libgdbm6 amd64 1.18.1-1 [27.8 kB] Get:4 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 libgdbm-compat4 amd64 1.18.1-1 [6148 B] Get:5 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 libperl5.28 amd64 5.28.0-3 [3804 kB] Get:6 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 perl amd64 5.28.0-3 [204 kB] Get:7 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 perl-base amd64 5.28.0-3 [1510 kB] Get:8 http://ftpmaster.internal/ubuntu disco/main amd64 libquadmath0 amd64 8.2.0-9ubuntu1 [134 kB] Get:9 http://ftpmaster.internal/ubuntu disco/main amd64 libubsan1 amd64 8.2.0-9ubuntu1 [121 kB] Get:10 http://ftpmaster.internal/ubuntu disco/main amd64 libitm1 amd64 8.2.0-9ubuntu1 [28.1 kB] Get:11 http://ftpmaster.internal/ubuntu disco/main amd64 libasan5 amd64 8.2.0-9ubuntu1 [364 kB] Get:12 http://ftpmaster.internal/ubuntu disco/main amd64 gcc-8-base amd64 8.2.0-9ubuntu1 [18.6 kB] Get:13 http://ftpmaster.internal/ubuntu disco/main amd64 libstdc++6 amd64 8.2.0-9ubuntu1 [399 kB] Get:14 http://ftpmaster.internal/ubuntu disco/main amd64 libgomp1 amd64 8.2.0-9ubuntu1 [76.4 kB] Get:15 http://ftpmaster.internal/ubuntu disco/main amd64 libatomic1 amd64 8.2.0-9ubuntu1 [9076 B] Get:16 http://ftpmaster.internal/ubuntu disco/main amd64 liblsan0 amd64 8.2.0-9ubuntu1 [132 kB] Get:17 http://ftpmaster.internal/ubuntu disco/main amd64 libtsan0 amd64 8.2.0-9ubuntu1 [288 kB] Get:18 http://ftpmaster.internal/ubuntu disco/main amd64 libmpx2 amd64 8.2.0-9ubuntu1 [11.7 kB] Get:19 http://ftpmaster.internal/ubuntu disco/main amd64 cpp-8 amd64 8.2.0-9ubuntu1 [7222 kB] Get:20 http://ftpmaster.internal/ubuntu disco/main amd64 libcc1-0 amd64 8.2.0-9ubuntu1 [39.5 kB] Get:21 http://ftpmaster.internal/ubuntu disco/main amd64 gcc-8 amd64 8.2.0-9ubuntu1 [7999 kB] Get:22 http://ftpmaster.internal/ubuntu disco/main amd64 g++-8 amd64 8.2.0-9ubuntu1 [8115 kB] Get:23 http://ftpmaster.internal/ubuntu disco/main amd64 libstdc++-8-dev amd64 8.2.0-9ubuntu1 [1538 kB] Get:24 http://ftpmaster.internal/ubuntu disco/main amd64 libgcc-8-dev amd64 8.2.0-9ubuntu1 [2304 kB] Get:25 http://ftpmaster.internal/ubuntu disco/main amd64 libgcc1 amd64 1:8.2.0-9ubuntu1 [40.7 kB] Get:26 http://ftpmaster.internal/ubuntu disco/main amd64 libbinutils amd64 2.31.1-7ubuntu1 [483 kB] Get:27 http://ftpmaster.internal/ubuntu disco/main amd64 binutils-common amd64 2.31.1-7ubuntu1 [194 kB] Get:28 http://ftpmaster.internal/ubuntu disco/main amd64 binutils amd64 2.31.1-7ubuntu1 [3392 B] Get:29 http://ftpmaster.internal/ubuntu disco/main amd64 binutils-x86-64-linux-gnu amd64 2.31.1-7ubuntu1 [1829 kB] Get:30 http://ftpmaster.internal/ubuntu disco/main amd64 libcap-ng0 amd64 0.7.9-1build1 [10.9 kB] Get:31 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 libdevmapper1.02.1 amd64 2:1.02.145-4.1ubuntu4 [127 kB] Get:32 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 dmsetup amd64 2:1.02.145-4.1ubuntu4 [74.6 kB] Get:33 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 libapparmor1 amd64 2.12-4ubuntu9 [30.1 kB] Get:34 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 libkmod2 amd64 25-1ubuntu1.1 [41.8 kB] Get:35 http://ftpmaster.internal/ubuntu disco/main amd64 tzdata all 2018g-1 [188 kB] Get:36 http://ftpmaster.internal/ubuntu disco/main amd64 g++ amd64 4:8.2.0-2ubuntu2 [1608 B] Get:37 http://ftpmaster.internal/ubuntu disco/main amd64 gcc amd64 4:8.2.0-2ubuntu2 [5224 B] Get:38 http://ftpmaster.internal/ubuntu disco/main amd64 cpp amd64 4:8.2.0-2ubuntu2 [27.6 kB] Get:39 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 linux-libc-dev amd64 4.18.0-11.12 [1039 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 41.3 MB in 1s (50.9 MB/s) (Reading database ... 12650 files and directories currently installed.) Preparing to unpack .../base-files_10.1ubuntu8_amd64.deb ... Unpacking base-files (10.1ubuntu8) over (10.1ubuntu7) ... Setting up base-files (10.1ubuntu8) ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Installing new version of config file /etc/lsb-release ... (Reading database ... 12650 files and directories currently installed.) Preparing to unpack .../0-perl_5.28.0-3_amd64.deb ... Unpacking perl (5.28.0-3) over (5.26.2-7) ... Selecting previously unselected package perl-modules-5.28. Preparing to unpack .../1-perl-modules-5.28_5.28.0-3_all.deb ... Unpacking perl-modules-5.28 (5.28.0-3) ... Selecting previously unselected package libgdbm6:amd64. Preparing to unpack .../2-libgdbm6_1.18.1-1_amd64.deb ... Unpacking libgdbm6:amd64 (1.18.1-1) ... Preparing to unpack .../3-libgdbm-compat4_1.18.1-1_amd64.deb ... Unpacking libgdbm-compat4:amd64 (1.18.1-1) over (1.14.1-6) ... Selecting previously unselected package libperl5.28:amd64. Preparing to unpack .../4-libperl5.28_5.28.0-3_amd64.deb ... Unpacking libperl5.28:amd64 (5.28.0-3) ... Preparing to unpack .../5-perl-base_5.28.0-3_amd64.deb ... Unpacking perl-base (5.28.0-3) over (5.26.2-7) ... Setting up perl-base (5.28.0-3) ... (Reading database ... 14539 files and directories currently installed.) Preparing to unpack .../libquadmath0_8.2.0-9ubuntu1_amd64.deb ... Unpacking libquadmath0:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../libubsan1_8.2.0-9ubuntu1_amd64.deb ... Unpacking libubsan1:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../libitm1_8.2.0-9ubuntu1_amd64.deb ... Unpacking libitm1:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../libasan5_8.2.0-9ubuntu1_amd64.deb ... Unpacking libasan5:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../gcc-8-base_8.2.0-9ubuntu1_amd64.deb ... Unpacking gcc-8-base:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Setting up gcc-8-base:amd64 (8.2.0-9ubuntu1) ... (Reading database ... 14539 files and directories currently installed.) Preparing to unpack .../libstdc++6_8.2.0-9ubuntu1_amd64.deb ... Unpacking libstdc++6:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Setting up libstdc++6:amd64 (8.2.0-9ubuntu1) ... (Reading database ... 14539 files and directories currently installed.) Preparing to unpack .../00-libgomp1_8.2.0-9ubuntu1_amd64.deb ... Unpacking libgomp1:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../01-libatomic1_8.2.0-9ubuntu1_amd64.deb ... Unpacking libatomic1:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../02-liblsan0_8.2.0-9ubuntu1_amd64.deb ... Unpacking liblsan0:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../03-libtsan0_8.2.0-9ubuntu1_amd64.deb ... Unpacking libtsan0:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../04-libmpx2_8.2.0-9ubuntu1_amd64.deb ... Unpacking libmpx2:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../05-cpp-8_8.2.0-9ubuntu1_amd64.deb ... Unpacking cpp-8 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../06-libcc1-0_8.2.0-9ubuntu1_amd64.deb ... Unpacking libcc1-0:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../07-gcc-8_8.2.0-9ubuntu1_amd64.deb ... Unpacking gcc-8 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../08-g++-8_8.2.0-9ubuntu1_amd64.deb ... Unpacking g++-8 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../09-libstdc++-8-dev_8.2.0-9ubuntu1_amd64.deb ... Unpacking libstdc++-8-dev:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../10-libgcc-8-dev_8.2.0-9ubuntu1_amd64.deb ... Unpacking libgcc-8-dev:amd64 (8.2.0-9ubuntu1) over (8.2.0-7ubuntu1) ... Preparing to unpack .../11-libgcc1_1%3a8.2.0-9ubuntu1_amd64.deb ... Unpacking libgcc1:amd64 (1:8.2.0-9ubuntu1) over (1:8.2.0-7ubuntu1) ... Setting up libgcc1:amd64 (1:8.2.0-9ubuntu1) ... (Reading database ... 14539 files and directories currently installed.) Preparing to unpack .../libbinutils_2.31.1-7ubuntu1_amd64.deb ... Unpacking libbinutils:amd64 (2.31.1-7ubuntu1) over (2.31.1-6ubuntu1) ... Preparing to unpack .../binutils-common_2.31.1-7ubuntu1_amd64.deb ... Unpacking binutils-common:amd64 (2.31.1-7ubuntu1) over (2.31.1-6ubuntu1) ... Preparing to unpack .../binutils_2.31.1-7ubuntu1_amd64.deb ... Unpacking binutils (2.31.1-7ubuntu1) over (2.31.1-6ubuntu1) ... Preparing to unpack .../binutils-x86-64-linux-gnu_2.31.1-7ubuntu1_amd64.deb ... Unpacking binutils-x86-64-linux-gnu (2.31.1-7ubuntu1) over (2.31.1-6ubuntu1) ... Preparing to unpack .../libcap-ng0_0.7.9-1build1_amd64.deb ... Unpacking libcap-ng0:amd64 (0.7.9-1build1) over (0.7.9-1) ... Setting up libcap-ng0:amd64 (0.7.9-1build1) ... (Reading database ... 14539 files and directories currently installed.) Preparing to unpack .../0-libdevmapper1.02.1_2%3a1.02.145-4.1ubuntu4_amd64.deb ... Unpacking libdevmapper1.02.1:amd64 (2:1.02.145-4.1ubuntu4) over (2:1.02.145-4.1ubuntu3) ... Preparing to unpack .../1-dmsetup_2%3a1.02.145-4.1ubuntu4_amd64.deb ... Unpacking dmsetup (2:1.02.145-4.1ubuntu4) over (2:1.02.145-4.1ubuntu3) ... Preparing to unpack .../2-libapparmor1_2.12-4ubuntu9_amd64.deb ... Unpacking libapparmor1:amd64 (2.12-4ubuntu9) over (2.12-4ubuntu8) ... Preparing to unpack .../3-libkmod2_25-1ubuntu1.1_amd64.deb ... Unpacking libkmod2:amd64 (25-1ubuntu1.1) over (25-1ubuntu1) ... Preparing to unpack .../4-tzdata_2018g-1_all.deb ... Unpacking tzdata (2018g-1) over (2018e-1) ... Preparing to unpack .../5-g++_4%3a8.2.0-2ubuntu2_amd64.deb ... Unpacking g++ (4:8.2.0-2ubuntu2) over (4:8.2.0-1ubuntu1) ... Preparing to unpack .../6-gcc_4%3a8.2.0-2ubuntu2_amd64.deb ... Unpacking gcc (4:8.2.0-2ubuntu2) over (4:8.2.0-1ubuntu1) ... Preparing to unpack .../7-cpp_4%3a8.2.0-2ubuntu2_amd64.deb ... Unpacking cpp (4:8.2.0-2ubuntu2) over (4:8.2.0-1ubuntu1) ... Preparing to unpack .../8-linux-libc-dev_4.18.0-11.12_amd64.deb ... Unpacking linux-libc-dev:amd64 (4.18.0-11.12) over (4.18.0-10.11) ... Setting up libquadmath0:amd64 (8.2.0-9ubuntu1) ... Setting up cpp-8 (8.2.0-9ubuntu1) ... Setting up libgomp1:amd64 (8.2.0-9ubuntu1) ... Setting up libatomic1:amd64 (8.2.0-9ubuntu1) ... Setting up cpp (4:8.2.0-2ubuntu2) ... Setting up libcc1-0:amd64 (8.2.0-9ubuntu1) ... Setting up tzdata (2018g-1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Nov 3 11:10:48 UTC 2018. Universal Time is now: Sat Nov 3 11:10:48 UTC 2018. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libtsan0:amd64 (8.2.0-9ubuntu1) ... Setting up linux-libc-dev:amd64 (4.18.0-11.12) ... Setting up libdevmapper1.02.1:amd64 (2:1.02.145-4.1ubuntu4) ... Setting up libkmod2:amd64 (25-1ubuntu1.1) ... Setting up liblsan0:amd64 (8.2.0-9ubuntu1) ... Setting up libgdbm6:amd64 (1.18.1-1) ... Setting up binutils-common:amd64 (2.31.1-7ubuntu1) ... Setting up libmpx2:amd64 (8.2.0-9ubuntu1) ... Setting up perl-modules-5.28 (5.28.0-3) ... Processing triggers for libc-bin (2.28-0ubuntu1) ... Setting up libapparmor1:amd64 (2.12-4ubuntu9) ... Setting up dmsetup (2:1.02.145-4.1ubuntu4) ... Setting up libgdbm-compat4:amd64 (1.18.1-1) ... Setting up libasan5:amd64 (8.2.0-9ubuntu1) ... Setting up libitm1:amd64 (8.2.0-9ubuntu1) ... Setting up libubsan1:amd64 (8.2.0-9ubuntu1) ... Setting up libbinutils:amd64 (2.31.1-7ubuntu1) ... Setting up libperl5.28:amd64 (5.28.0-3) ... Setting up perl (5.28.0-3) ... Setting up libgcc-8-dev:amd64 (8.2.0-9ubuntu1) ... Setting up binutils-x86-64-linux-gnu (2.31.1-7ubuntu1) ... Setting up libstdc++-8-dev:amd64 (8.2.0-9ubuntu1) ... Setting up binutils (2.31.1-7ubuntu1) ... Setting up gcc-8 (8.2.0-9ubuntu1) ... Setting up g++-8 (8.2.0-9ubuntu1) ... Setting up gcc (4:8.2.0-2ubuntu2) ... Setting up g++ (4:8.2.0-2ubuntu2) ... Processing triggers for libc-bin (2.28-0ubuntu1) ... RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package PACKAGEBUILD-15602599 amd64 disco-proposed -c chroot:build-PACKAGEBUILD-15602599 --arch=amd64 --dist=disco-proposed --nolog -A libcoro-perl_6.520-1build1.dsc Initiating build PACKAGEBUILD-15602599 with 4 jobs across 4 processor cores. Kernel reported to sbuild: 4.4.0-138-generic #164-Ubuntu SMP Tue Oct 2 17:16:02 UTC 2018 x86_64 sbuild (Debian sbuild) 0.67.0 (26 Dec 2015) on lcy01-amd64-029.buildd +==============================================================================+ | libcoro-perl 6.520-1build1 (amd64) 03 Nov 2018 11:10 | +==============================================================================+ Package: libcoro-perl Version: 6.520-1build1 Source Version: 6.520-1build1 Distribution: disco-proposed Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 I: NOTICE: Log filtering will replace 'build/libcoro-perl-_1xeGU/libcoro-perl-6.520' with '<>' I: NOTICE: Log filtering will replace 'build/libcoro-perl-_1xeGU' with '<>' I: NOTICE: Log filtering will replace 'home/buildd/build-PACKAGEBUILD-15602599/chroot-autobuild' with '<>' +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- libcoro-perl_6.520-1build1.dsc exists in .; copying to chroot Check architectures ------------------- Check dependencies ------------------ Merged Build-Depends: build-essential, fakeroot Filtered Build-Depends: build-essential, fakeroot dpkg-deb: building package 'sbuild-build-depends-core-dummy' in '/<>/resolver-yN5TVF/apt_archive/sbuild-build-depends-core-dummy.deb'. Ign:1 copy:/<>/resolver-yN5TVF/apt_archive ./ InRelease Get:2 copy:/<>/resolver-yN5TVF/apt_archive ./ Release [2119 B] Ign:3 copy:/<>/resolver-yN5TVF/apt_archive ./ Release.gpg Get:4 copy:/<>/resolver-yN5TVF/apt_archive ./ Sources [214 B] Get:5 copy:/<>/resolver-yN5TVF/apt_archive ./ Packages [527 B] Fetched 2860 B in 0s (219 kB/s) Reading package lists... Reading package lists... +------------------------------------------------------------------------------+ | Install core build dependencies (apt-based resolver) | +------------------------------------------------------------------------------+ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libgdbm5 libperl5.26 perl-modules-5.26 Use 'apt autoremove' to remove them. The following NEW packages will be installed: sbuild-build-depends-core-dummy 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 852 B of archives. After this operation, 0 B of additional disk space will be used. Get:1 copy:/<>/resolver-yN5TVF/apt_archive ./ sbuild-build-depends-core-dummy 0.invalid.0 [852 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 852 B in 0s (0 B/s) Selecting previously unselected package sbuild-build-depends-core-dummy. (Reading database ... 14539 files and directories currently installed.) Preparing to unpack .../sbuild-build-depends-core-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ... Setting up sbuild-build-depends-core-dummy (0.invalid.0) ... Merged Build-Depends: debhelper (>= 10), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl Filtered Build-Depends: debhelper (>= 10), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl dpkg-deb: building package 'sbuild-build-depends-libcoro-perl-dummy' in '/<>/resolver-XaC97F/apt_archive/sbuild-build-depends-libcoro-perl-dummy.deb'. Ign:1 copy:/<>/resolver-XaC97F/apt_archive ./ InRelease Get:2 copy:/<>/resolver-XaC97F/apt_archive ./ Release [2119 B] Ign:3 copy:/<>/resolver-XaC97F/apt_archive ./ Release.gpg Get:4 copy:/<>/resolver-XaC97F/apt_archive ./ Sources [258 B] Get:5 copy:/<>/resolver-XaC97F/apt_archive ./ Packages [580 B] Fetched 2957 B in 0s (234 kB/s) Reading package lists... Reading package lists... +------------------------------------------------------------------------------+ | Install libcoro-perl build dependencies (apt-based resolver) | +------------------------------------------------------------------------------+ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libperl5.26 perl-modules-5.26 Use 'apt autoremove' to remove them. The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libanyevent-perl libarchive-zip-perl libbsd0 libcanary-stability-perl libcommon-sense-perl libcroco3 libelf1 libev-perl libevent-perl libfile-stripnondeterminism-perl libglib2.0-0 libguard-perl libicu60 libmagic-mgc libmagic1 libpipeline1 libsigsegv2 libtimedate-perl libtool libxml2 m4 man-db po-debconf Suggested packages: autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois vacation dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libio-async-perl libjson-perl | libjson-xs-perl libnet-ssleay-perl libpoe-perl libtask-weaken-perl libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libasync-interrupt-perl libarchive-cpio-perl libglib2.0-data shared-mime-info xdg-user-dirs libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libanyevent-perl libarchive-zip-perl libbsd0 libcanary-stability-perl libcommon-sense-perl libcroco3 libelf1 libev-perl libevent-perl libfile-stripnondeterminism-perl libglib2.0-0 libguard-perl libicu60 libmagic-mgc libmagic1 libpipeline1 libsigsegv2 libtimedate-perl libtool libxml2 m4 man-db po-debconf sbuild-build-depends-libcoro-perl-dummy 0 upgraded, 38 newly installed, 0 to remove and 0 not upgraded. Need to get 17.6 MB of archives. After this operation, 65.2 MB of additional disk space will be used. Get:1 copy:/<>/resolver-XaC97F/apt_archive ./ sbuild-build-depends-libcoro-perl-dummy 0.invalid.0 [904 B] Get:2 http://ftpmaster.internal/ubuntu disco/main amd64 libbsd0 amd64 0.9.1-1 [44.6 kB] Get:3 http://ftpmaster.internal/ubuntu disco/main amd64 bsdmainutils amd64 11.1.2ubuntu2 [181 kB] Get:4 http://ftpmaster.internal/ubuntu disco/main amd64 groff-base amd64 1.22.3-10 [1153 kB] Get:5 http://ftpmaster.internal/ubuntu disco/main amd64 libpipeline1 amd64 1.5.0-1 [25.3 kB] Get:6 http://ftpmaster.internal/ubuntu disco/main amd64 man-db amd64 2.8.4-2 [1029 kB] Get:7 http://ftpmaster.internal/ubuntu disco/main amd64 libmagic-mgc amd64 1:5.34-2 [197 kB] Get:8 http://ftpmaster.internal/ubuntu disco/main amd64 libmagic1 amd64 1:5.34-2 [72.3 kB] Get:9 http://ftpmaster.internal/ubuntu disco/main amd64 file amd64 1:5.34-2 [22.8 kB] Get:10 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 libelf1 amd64 0.170-0.5.0ubuntu1 [43.5 kB] Get:11 http://ftpmaster.internal/ubuntu disco/main amd64 libglib2.0-0 amd64 2.58.1-2 [1176 kB] Get:12 http://ftpmaster.internal/ubuntu disco/main amd64 libicu60 amd64 60.2-6ubuntu1 [8055 kB] Get:13 http://ftpmaster.internal/ubuntu disco/main amd64 libxml2 amd64 2.9.4+dfsg1-7ubuntu1 [625 kB] Get:14 http://ftpmaster.internal/ubuntu disco/main amd64 gettext-base amd64 0.19.8.1-8 [50.1 kB] Get:15 http://ftpmaster.internal/ubuntu disco/main amd64 libsigsegv2 amd64 2.12-2 [13.9 kB] Get:16 http://ftpmaster.internal/ubuntu disco/main amd64 m4 amd64 1.4.18-1ubuntu1 [199 kB] Get:17 http://ftpmaster.internal/ubuntu disco/main amd64 autoconf all 2.69-11 [322 kB] Get:18 http://ftpmaster.internal/ubuntu disco/main amd64 autotools-dev all 20180224.1 [39.6 kB] Get:19 http://ftpmaster.internal/ubuntu disco-proposed/main amd64 automake all 1:1.16.1-3 [522 kB] Get:20 http://ftpmaster.internal/ubuntu disco/main amd64 autopoint all 0.19.8.1-8 [412 kB] Get:21 http://ftpmaster.internal/ubuntu disco/main amd64 libtool all 2.4.6-4 [196 kB] Get:22 http://ftpmaster.internal/ubuntu disco/main amd64 dh-autoreconf all 19 [16.1 kB] Get:23 http://ftpmaster.internal/ubuntu disco/main amd64 libarchive-zip-perl all 1.63-1 [84.8 kB] Get:24 http://ftpmaster.internal/ubuntu disco/main amd64 libfile-stripnondeterminism-perl all 0.042-1 [15.2 kB] Get:25 http://ftpmaster.internal/ubuntu disco/main amd64 libtimedate-perl all 2.3000-2 [37.5 kB] Get:26 http://ftpmaster.internal/ubuntu disco/main amd64 dh-strip-nondeterminism all 0.042-1 [5188 B] Get:27 http://ftpmaster.internal/ubuntu disco/main amd64 dwz amd64 0.12-2 [77.7 kB] Get:28 http://ftpmaster.internal/ubuntu disco/main amd64 libcroco3 amd64 0.6.12-2 [81.3 kB] Get:29 http://ftpmaster.internal/ubuntu disco/main amd64 gettext amd64 0.19.8.1-8 [896 kB] Get:30 http://ftpmaster.internal/ubuntu disco/main amd64 intltool-debian all 0.35.0+20060710.4 [24.9 kB] Get:31 http://ftpmaster.internal/ubuntu disco/main amd64 po-debconf all 1.0.20 [232 kB] Get:32 http://ftpmaster.internal/ubuntu disco/main amd64 debhelper all 11.3.2ubuntu1 [883 kB] Get:33 http://ftpmaster.internal/ubuntu disco-proposed/universe amd64 libanyevent-perl amd64 7.140-2build1 [364 kB] Get:34 http://ftpmaster.internal/ubuntu disco/universe amd64 libcanary-stability-perl amd64 2006-1 [6576 B] Get:35 http://ftpmaster.internal/ubuntu disco-proposed/universe amd64 libcommon-sense-perl amd64 3.74-2build4 [20.2 kB] Get:36 http://ftpmaster.internal/ubuntu disco-proposed/universe amd64 libev-perl amd64 4.22-1build3 [231 kB] Get:37 http://ftpmaster.internal/ubuntu disco-proposed/universe amd64 libevent-perl amd64 1.26-1build3 [250 kB] Get:38 http://ftpmaster.internal/ubuntu disco-proposed/universe amd64 libguard-perl amd64 1.023-1build4 [15.1 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 17.6 MB in 0s (44.7 MB/s) Selecting previously unselected package libbsd0:amd64. (Reading database ... 14539 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-1_amd64.deb ... Unpacking libbsd0:amd64 (0.9.1-1) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2ubuntu2_amd64.deb ... Unpacking bsdmainutils (11.1.2ubuntu2) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.3-10_amd64.deb ... Unpacking groff-base (1.22.3-10) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../03-libpipeline1_1.5.0-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.0-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.8.4-2_amd64.deb ... Unpacking man-db (2.8.4-2) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../05-libmagic-mgc_1%3a5.34-2_amd64.deb ... Unpacking libmagic-mgc (1:5.34-2) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../06-libmagic1_1%3a5.34-2_amd64.deb ... Unpacking libmagic1:amd64 (1:5.34-2) ... Selecting previously unselected package file. Preparing to unpack .../07-file_1%3a5.34-2_amd64.deb ... Unpacking file (1:5.34-2) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../08-libelf1_0.170-0.5.0ubuntu1_amd64.deb ... Unpacking libelf1:amd64 (0.170-0.5.0ubuntu1) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../09-libglib2.0-0_2.58.1-2_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.58.1-2) ... Selecting previously unselected package libicu60:amd64. Preparing to unpack .../10-libicu60_60.2-6ubuntu1_amd64.deb ... Unpacking libicu60:amd64 (60.2-6ubuntu1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../11-libxml2_2.9.4+dfsg1-7ubuntu1_amd64.deb ... Unpacking libxml2:amd64 (2.9.4+dfsg1-7ubuntu1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../12-gettext-base_0.19.8.1-8_amd64.deb ... Unpacking gettext-base (0.19.8.1-8) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../13-libsigsegv2_2.12-2_amd64.deb ... Unpacking libsigsegv2:amd64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../14-m4_1.4.18-1ubuntu1_amd64.deb ... Unpacking m4 (1.4.18-1ubuntu1) ... Selecting previously unselected package autoconf. Preparing to unpack .../15-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../16-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../17-automake_1%3a1.16.1-3_all.deb ... Unpacking automake (1:1.16.1-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../18-autopoint_0.19.8.1-8_all.deb ... Unpacking autopoint (0.19.8.1-8) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.6-4_all.deb ... Unpacking libtool (2.4.6-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.63-1_all.deb ... Unpacking libarchive-zip-perl (1.63-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_0.042-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (0.042-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../23-libtimedate-perl_2.3000-2_all.deb ... Unpacking libtimedate-perl (2.3000-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_0.042-1_all.deb ... Unpacking dh-strip-nondeterminism (0.042-1) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.12-2_amd64.deb ... Unpacking dwz (0.12-2) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../26-libcroco3_0.6.12-2_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-2) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.19.8.1-8_amd64.deb ... Unpacking gettext (0.19.8.1-8) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.4_all.deb ... Unpacking intltool-debian (0.35.0+20060710.4) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.20_all.deb ... Unpacking po-debconf (1.0.20) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_11.3.2ubuntu1_all.deb ... Unpacking debhelper (11.3.2ubuntu1) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../31-libanyevent-perl_7.140-2build1_amd64.deb ... Unpacking libanyevent-perl (7.140-2build1) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../32-libcanary-stability-perl_2006-1_amd64.deb ... Unpacking libcanary-stability-perl (2006-1) ... Selecting previously unselected package libcommon-sense-perl. Preparing to unpack .../33-libcommon-sense-perl_3.74-2build4_amd64.deb ... Unpacking libcommon-sense-perl (3.74-2build4) ... Selecting previously unselected package libev-perl. Preparing to unpack .../34-libev-perl_4.22-1build3_amd64.deb ... Unpacking libev-perl (4.22-1build3) ... Selecting previously unselected package libevent-perl. Preparing to unpack .../35-libevent-perl_1.26-1build3_amd64.deb ... Unpacking libevent-perl (1.26-1build3) ... Selecting previously unselected package libguard-perl. Preparing to unpack .../36-libguard-perl_1.023-1build4_amd64.deb ... Unpacking libguard-perl (1.023-1build4) ... Selecting previously unselected package sbuild-build-depends-libcoro-perl-dummy. Preparing to unpack .../37-sbuild-build-depends-libcoro-perl-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ... Setting up libevent-perl (1.26-1build3) ... Setting up libcommon-sense-perl (3.74-2build4) ... Setting up libicu60:amd64 (60.2-6ubuntu1) ... Setting up libcanary-stability-perl (2006-1) ... Setting up libarchive-zip-perl (1.63-1) ... Setting up libanyevent-perl (7.140-2build1) ... Setting up libtimedate-perl (2.3000-2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up libelf1:amd64 (0.170-0.5.0ubuntu1) ... Setting up groff-base (1.22.3-10) ... Setting up libglib2.0-0:amd64 (2.58.1-2) ... No schema files found: doing nothing. Setting up libev-perl (4.22-1build3) ... Setting up gettext-base (0.19.8.1-8) ... Setting up libpipeline1:amd64 (1.5.0-1) ... Setting up m4 (1.4.18-1ubuntu1) ... Setting up libbsd0:amd64 (0.9.1-1) ... Setting up libxml2:amd64 (2.9.4+dfsg1-7ubuntu1) ... Setting up libmagic-mgc (1:5.34-2) ... Setting up libmagic1:amd64 (1:5.34-2) ... Setting up libcroco3:amd64 (0.6.12-2) ... Processing triggers for libc-bin (2.28-0ubuntu1) ... Setting up dwz (0.12-2) ... Setting up autotools-dev (20180224.1) ... Setting up bsdmainutils (11.1.2ubuntu2) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libguard-perl (1.023-1build4) ... Setting up autopoint (0.19.8.1-8) ... Setting up libfile-stripnondeterminism-perl (0.042-1) ... Setting up gettext (0.19.8.1-8) ... Setting up autoconf (2.69-11) ... Setting up file (1:5.34-2) ... Setting up intltool-debian (0.35.0+20060710.4) ... Setting up automake (1:1.16.1-3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up man-db (2.8.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libtool (2.4.6-4) ... Setting up po-debconf (1.0.20) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (0.042-1) ... Setting up debhelper (11.3.2ubuntu1) ... Setting up sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.28-0ubuntu1) ... +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 4.4.0-138-generic amd64 (x86_64) Toolchain package versions: binutils_2.31.1-7ubuntu1 dpkg-dev_1.19.0.5ubuntu5 g++-8_8.2.0-9ubuntu1 gcc-8_8.2.0-9ubuntu1 libc6-dev_2.28-0ubuntu1 libstdc++-8-dev_8.2.0-9ubuntu1 libstdc++6_8.2.0-9ubuntu1 linux-libc-dev_4.18.0-11.12 Package versions: adduser_3.117ubuntu1 advancecomp_2.1-1 apt_1.7.0 autoconf_2.69-11 automake_1:1.16.1-3 autopoint_0.19.8.1-8 autotools-dev_20180224.1 base-files_10.1ubuntu8 base-passwd_3.5.45 bash_4.4.18-2ubuntu3 binutils_2.31.1-7ubuntu1 binutils-common_2.31.1-7ubuntu1 binutils-x86-64-linux-gnu_2.31.1-7ubuntu1 bsdmainutils_11.1.2ubuntu2 bsdutils_1:2.32-0.1ubuntu2 build-essential_12.5ubuntu2 bzip2_1.0.6-9 ca-certificates_20180409 coreutils_8.28-1ubuntu2 cpp_4:8.2.0-2ubuntu2 cpp-8_8.2.0-9ubuntu1 dash_0.5.8-2.10 debconf_1.5.69 debhelper_11.3.2ubuntu1 debianutils_4.8.6 dh-autoreconf_19 dh-strip-nondeterminism_0.042-1 diffutils_1:3.6-1 dmsetup_2:1.02.145-4.1ubuntu4 dpkg_1.19.0.5ubuntu5 dpkg-dev_1.19.0.5ubuntu5 dwz_0.12-2 e2fslibs_1.44.4-2 e2fsprogs_1.44.4-2 fakeroot_1.22-2ubuntu1 fdisk_2.32-0.1ubuntu2 file_1:5.34-2 findutils_4.6.0+git+20180808-2 g++_4:8.2.0-2ubuntu2 g++-8_8.2.0-9ubuntu1 gcc_4:8.2.0-2ubuntu2 gcc-8_8.2.0-9ubuntu1 gcc-8-base_8.2.0-9ubuntu1 gettext_0.19.8.1-8 gettext-base_0.19.8.1-8 gpg_2.2.8-3ubuntu1 gpg-agent_2.2.8-3ubuntu1 gpgconf_2.2.8-3ubuntu1 gpgv_2.2.8-3ubuntu1 grep_3.1-2ubuntu1 groff-base_1.22.3-10 gzip_1.6-5ubuntu2 hostname_3.20 init_1.54 init-system-helpers_1.54 initscripts_2.88dsf-59.3ubuntu2 insserv_1.14.0-5ubuntu3 intltool-debian_0.35.0+20060710.4 libacl1_2.2.52-3build1 libanyevent-perl_7.140-2build1 libapparmor1_2.12-4ubuntu9 libapt-pkg5.0_1.7.0 libarchive-zip-perl_1.63-1 libargon2-1_0~20171227-0.1 libasan5_8.2.0-9ubuntu1 libassuan0_2.5.1-2 libatomic1_8.2.0-9ubuntu1 libattr1_1:2.4.47-2build1 libaudit-common_1:2.8.3-1ubuntu2 libaudit1_1:2.8.3-1ubuntu2 libbinutils_2.31.1-7ubuntu1 libblkid1_2.32-0.1ubuntu2 libbsd0_0.9.1-1 libbz2-1.0_1.0.6-9 libc-bin_2.28-0ubuntu1 libc-dev-bin_2.28-0ubuntu1 libc6_2.28-0ubuntu1 libc6-dev_2.28-0ubuntu1 libcanary-stability-perl_2006-1 libcap-ng0_0.7.9-1build1 libcap2_1:2.25-1.2 libcc1-0_8.2.0-9ubuntu1 libcom-err2_1.44.4-2 libcomerr2_1.44.4-2 libcommon-sense-perl_3.74-2build4 libcroco3_0.6.12-2 libcryptsetup12_2:2.0.4-2ubuntu2 libdb5.3_5.3.28+dfsg1-0.1 libdebconfclient0_0.244ubuntu1 libdevmapper1.02.1_2:1.02.145-4.1ubuntu4 libdpkg-perl_1.19.0.5ubuntu5 libelf1_0.170-0.5.0ubuntu1 libev-perl_4.22-1build3 libevent-perl_1.26-1build3 libext2fs2_1.44.4-2 libfakeroot_1.22-2ubuntu1 libfdisk1_2.32-0.1ubuntu2 libffi6_3.2.1-8 libfile-stripnondeterminism-perl_0.042-1 libgcc-8-dev_8.2.0-9ubuntu1 libgcc1_1:8.2.0-9ubuntu1 libgcrypt20_1.8.3-1ubuntu1 libgdbm-compat4_1.18.1-1 libgdbm5_1.14.1-6 libgdbm6_1.18.1-1 libglib2.0-0_2.58.1-2 libgmp10_2:6.1.2+dfsg-3 libgnutls30_3.6.4-2ubuntu1 libgomp1_8.2.0-9ubuntu1 libgpg-error0_1.32-1 libguard-perl_1.023-1build4 libhogweed4_3.4-1 libicu60_60.2-6ubuntu1 libidn11_1.33-2.2ubuntu1 libidn2-0_2.0.5-1 libip4tc0_1.6.1-2ubuntu2 libisl19_0.20-2 libitm1_8.2.0-9ubuntu1 libjson-c3_0.12.1-1.3 libkmod2_25-1ubuntu1.1 liblockfile-bin_1.14-1.1 liblockfile1_1.14-1.1 liblsan0_8.2.0-9ubuntu1 liblz4-1_1.8.2-1ubuntu1 liblzma5_5.2.2-1.3 libmagic-mgc_1:5.34-2 libmagic1_1:5.34-2 libmount1_2.32-0.1ubuntu2 libmpc3_1.1.0-1 libmpfr6_4.0.1-1 libmpx2_8.2.0-9ubuntu1 libncurses6_6.1+20180210-4ubuntu1 libncursesw6_6.1+20180210-4ubuntu1 libnettle6_3.4-1 libnpth0_1.6-1 libp11-kit0_0.23.14-2 libpam-modules_1.1.8-3.6ubuntu2 libpam-modules-bin_1.1.8-3.6ubuntu2 libpam-runtime_1.1.8-3.6ubuntu2 libpam0g_1.1.8-3.6ubuntu2 libpcre3_2:8.39-11 libperl5.26_5.26.2-7 libperl5.28_5.28.0-3 libpipeline1_1.5.0-1 libpng16-16_1.6.34-2 libprocps7_2:3.3.15-2ubuntu1 libquadmath0_8.2.0-9ubuntu1 libreadline7_7.0-5 libseccomp2_2.3.3-3ubuntu1 libselinux1_2.8-1build1 libsemanage-common_2.8-1build1 libsemanage1_2.8-1build1 libsepol1_2.8-1 libsigsegv2_2.12-2 libslang2_2.3.2-1ubuntu1 libsmartcols1_2.32-0.1ubuntu2 libsqlite3-0_3.24.0-1 libss2_1.44.4-2 libssl1.1_1.1.1-1ubuntu2 libstdc++-8-dev_8.2.0-9ubuntu1 libstdc++6_8.2.0-9ubuntu1 libsystemd0_239-7ubuntu10 libtasn1-6_4.13-3 libtimedate-perl_2.3000-2 libtinfo6_6.1+20180210-4ubuntu1 libtool_2.4.6-4 libtsan0_8.2.0-9ubuntu1 libubsan1_8.2.0-9ubuntu1 libudev1_239-7ubuntu10 libunistring2_0.9.10-1ubuntu1 libusb-0.1-4_2:0.1.12-32 libuuid1_2.32-0.1ubuntu2 libxml2_2.9.4+dfsg1-7ubuntu1 libzstd1_1.3.5+dfsg-1ubuntu1 linux-libc-dev_4.18.0-11.12 lockfile-progs_0.1.17build1 login_1:4.5-1ubuntu1 lsb-base_9.20170808ubuntu1 m4_1.4.18-1ubuntu1 make_4.2.1-1.2 man-db_2.8.4-2 mawk_1.3.3-17ubuntu3 mount_2.32-0.1ubuntu2 multiarch-support_2.28-0ubuntu1 ncurses-base_6.1+20180210-4ubuntu1 ncurses-bin_6.1+20180210-4ubuntu1 openssl_1.1.1-1ubuntu2 optipng_0.7.6-1.1 passwd_1:4.5-1ubuntu1 patch_2.7.6-3 perl_5.28.0-3 perl-base_5.28.0-3 perl-modules-5.26_5.26.2-7 perl-modules-5.28_5.28.0-3 pinentry-curses_1.1.0-1build2 pkgbinarymangler_143 po-debconf_1.0.20 policyrcd-script-zg2_0.1-3 procps_2:3.3.15-2ubuntu1 readline-common_7.0-5 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-libcoro-perl-dummy_0.invalid.0 sed_4.5-1 sensible-utils_0.0.12 systemd_239-7ubuntu10 systemd-sysv_239-7ubuntu10 sysv-rc_2.88dsf-59.3ubuntu2 sysvinit-utils_2.88dsf-59.10ubuntu2 tar_1.30+dfsg-2 tzdata_2018g-1 ubuntu-keyring_2018.09.18.1 util-linux_2.32-0.1ubuntu2 xz-utils_5.2.2-1.3 zlib1g_1:1.2.11.dfsg-0ubuntu2 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- gpgv: Signature made Sat Nov 3 01:55:47 2018 UTC gpgv: using RSA key 8BC600805AAC660FEB4D198383401A30B1CDE58F gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libcoro-perl_6.520-1build1.dsc dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.520 dpkg-source: info: unpacking libcoro-perl_6.520.orig.tar.gz dpkg-source: info: unpacking libcoro-perl_6.520-1build1.debian.tar.xz dpkg-source: info: applying fix-wrong-path-for-interpreter.patch dpkg-source: info: applying whatis.patch dpkg-source: info: applying spelling.patch Check disc space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf DEB_BUILD_OPTIONS=parallel=4 HOME=/sbuild-nonexistent LANG=C.UTF-8 LC_ALL=C.UTF-8 LOGNAME=buildd PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games SCHROOT_ALIAS_NAME=build-PACKAGEBUILD-15602599 SCHROOT_CHROOT_NAME=build-PACKAGEBUILD-15602599 SCHROOT_COMMAND=env SCHROOT_GID=2501 SCHROOT_GROUP=buildd SCHROOT_SESSION_ID=build-PACKAGEBUILD-15602599 SCHROOT_UID=2001 SCHROOT_USER=buildd SHELL=/bin/sh TERM=unknown USER=buildd V=1 dpkg-buildpackage ----------------- dpkg-buildpackage: info: source package libcoro-perl dpkg-buildpackage: info: source version 6.520-1build1 dpkg-buildpackage: info: source distribution disco dpkg-source --before-build libcoro-perl-6.520 dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-z,now" *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.028000, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Coro. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Coro, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Coro with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Event version 1.26 found, building Event support. EV version 4.22 found, building EV support. Checking if your kit is complete... Looks good *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has a number of configuration options. Due to its maturity, the defaults that Coro chooses are usually fine, so you can decide to skip these questions. Only if something went wrong you should select 'n' here and manually configure Coro, and, of course, report this to the maintainer :) Skip further questions and use defaults (y/n)? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a number of methods to implement coroutines at the C level. The default chosen is based on your current confguration and is correct in most cases, but you still can chose between these alternatives: u The unix 'ucontext.h' functions are relatively new and not implemented or well-tested in older unices. They allow very fast coroutine creation and reasonably fast switching. They are, however, usually slower than the other alternatives due to an extra syscall done by swapcontext. And while nominally most portable (it's the only POSIX-standardised interface for coroutines), ucontext functions are, as usual, broken on most/all BSDs. s If the ucontext functions are not working or you don't want to use them for other reasons you can try a workaround using setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine creation is rather slow, but switching is very fast (often much faster than with the ucontext functions). Unfortunately, glibc-2.1 and below don't even feature a working sigaltstack. You cannot use this implementation if some other code uses SIGUSR2 or you plan to create coroutines from an alternative signal stack, as both are being used for coroutine creation. a Handcoded assembly. This is the fastest and most compatible method, with the least side effects, if it works, that is. It has been tested on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64 systems using the SVR ELF ABI (it is also reported to be working on Strawberry Perl for Windows using MinGW). This is the recommended method on supported platforms. When it doesn't work, use another method, such as (s)etjmp/longjmp. l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need this hack. Since it is very linux-specific it is also quite fast and recommended even for newer versions; when it works, that is (currently x86 and a few others only. If it compiles, it's usually ok). Newer glibc versions (>= 2.5) stop working with this implementation however. i IRIX. For some reason, SGI really does not like to follow POSIX (does that surprise you?), so this workaround might be needed (it's fast), although [s] and [u] should also work now. w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry Perl), although, as there is no standard on how to do this under windows, different environments might work differently. Doh. f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower and uses a lot more memory, but should be working all the time. p Use pthread API. Try to avoid this option, it was only created to make a point about the programming language shootout. It is unlikely to work with perls that have windows process emulation enabled ("perl threads"). It is also likely the slowest method of implementing coroutines. It might work fine as a last resort, however, as the pthread API is slightly better tested than ucontext functions for example. Of course, not on BSDs, who usually have very broken pthread implementations. Coro tries hard to come up with a suitable default for most systems, so pressing return at the prompt usually does the right thing. If you experience problems (e.g. make test fails) then you should experiment with this setting. Use which implementation, etjmp, ctx, sm, rix, inux,

threads, indows, iber? [a] a Using handcoded assembler implementation *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Per-context stack size factor: Depending on your settings, Coro tries to share the C stacks is creates as much as possible, but sometimes it needs to allocate a new one. This setting controls the maximum size that gets allocated, and should not be set too high, as memory and address space still is wasted even if it's not fully used. The value entered will be multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8 on 64-bit systems. A setting of 16384 (the default) therefore corresponds to a 64k..128k stack, which usually is ample space (you might even want to try 8192 or lower if your program creates many coroutines). On systems supporting mmap and dynamic memory management, the actual memory usually gets allocated on demand, but with many large stacks you can still run out of address space on your typical 32 bit platform (not to forget the pagetables). Some perls (mostly threaded ones and perl compiled under linux 2.6) and some programs (inefficient regexes can use a lot of stack space) may need much, much more: If Coro segfaults with weird backtraces (e.g. in a function prologue) or in t/10_bugs.t, you might want to increase this to 65536 or more. The default should be fine, and can be changed at runtime with Coro::State::cctx_stacksize. C stack size factor? [16384] 16384 using a stacksize of 16384 * sizeof(void*) *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can optionally put a guard area before each stack segment: When the stack is too small and the access is not too far outside the stack (i.e. within the guard area), then the program will safely segfault instead of running into other data. The cost is some additional overhead with is usually negligible, and extra use of address space. The guard area size currently needs to be specified in pages (typical pagesizes are 4k and 8k). The guard area is only enabled on a few hardcoded architectures and is ignored on others. The actual preprocessor expression disables this feature if: !__i386 && !__x86_64 && !__powerpc && !__m68k && !__alpha && !__mips && !__sparc64 The default, as usual, should be just fine. Number of guard pages (0 disables)? [4] 4 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can tell valgrind about its stacks and so reduce spurious warnings where valgrind would otherwise complain about possible stack switches. Enabling this does not incur noticable runtime or memory overhead, but it requires that you have the header file available. Valgrind support is completely optional, so disabling it is the safe choice. Enable valgrind support (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use (or even trick) some perl functions into doing what it needs instead of relying on (some) of its own functions. This might increase chances that it compiles and works, but it could just as well result in memory leaks, crashes or silent data corruption. It certainly does result in slightly slower speed and higher memory consumption, though, so YOU SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT. Prefer perl functions over coro functions (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a simple JIT compiler to compile a part of the thread switch function at runtime. On perls with windows process emulation (most!), this results in a 50% speed improvement. On sane perls, the gain is much less, usually around 5%. If you enable this option, then the JIT will be enabled, on compatible operating systems and CPUs (currently only x86/amd64 on certain unix clones). Otherwise, it will be disabled. It should be safe to leave on - this setting is only here so you can switch it off in case of problems. Note that some broken kernels (often calling themselves "hardened") break all JIT generation by manipulating some system calls. If you get bus errors or segmentation faults immediately when the JIT is enabled but not without, then note that disabling the JIT only fixes some symptoms, not the underlying problem, and you might run into other problems later. Try to use the JIT compiler, if available? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has experimental support for cloning states. This can be used to implement a scheme-like call/cc. However, this doesn't add to the expressiveness in general, and is likely perl-version specific (and perl 5.12 deliberately removed support for it). As such, it is disabled by default. Enable it when you want to play around with it, but note that it isn't supported, and unlikely ever will be. It exists mainly to prove that it could be done - if only it were useful for something. Implement Coro::State->clone method (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro Writing MYMETA.yml and MYMETA.json dh_auto_build make -j4 make[1]: Entering directory '/<>' make[2]: Entering directory '/<>/Coro' Running Mkbootstrap for State () "/usr/bin/perl" "/usr/share/perl/5.28.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' -typemap '/<>/Coro/typemap' State.xs > State.xsc cp Coro/Util.pm blib/lib/Coro/Util.pm cp Coro/Specific.pm blib/lib/Coro/Specific.pm cp Coro/Debug.pm blib/lib/Coro/Debug.pm cp Coro/Select.pm blib/lib/Coro/Select.pm cp Coro/LWP.pm blib/lib/Coro/LWP.pm cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl cp Coro/AIO.pm blib/lib/Coro/AIO.pm cp Coro/BDB.pm blib/lib/Coro/BDB.pm cp Coro/Handle.pm blib/lib/Coro/Handle.pm cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm cp Coro/Storable.pm blib/lib/Coro/Storable.pm cp Coro/State.pm blib/lib/Coro/State.pm cp Coro.pm blib/lib/Coro.pm cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm cp Coro/Socket.pm blib/lib/Coro/Socket.pm cp Coro/Channel.pm blib/lib/Coro/Channel.pm cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm cp Coro/Timer.pm blib/lib/Coro/Timer.pm cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm cp Coro/Signal.pm blib/lib/Coro/Signal.pm chmod 644 "State.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Skip ../blib/lib/Coro/Select.pm (unchanged) Skip ../blib/lib/Coro/LWP.pm (unchanged) Skip ../blib/lib/Coro/Util.pm (unchanged) cp Intro.pod ../blib/lib/Coro/Intro.pod Skip ../blib/lib/Coro/Semaphore.pm (unchanged) Skip ../blib/lib/Coro/Timer.pm (unchanged) Skip ../blib/lib/Coro/AnyEvent.pm (unchanged) Skip ../blib/lib/Coro/Specific.pm (unchanged) Skip ../blib/lib/Coro/State.pm (unchanged) Skip ../blib/lib/Coro/Signal.pm (unchanged) Skip ../blib/lib/Coro/Storable.pm (unchanged) Skip ../blib/lib/Coro/AIO.pm (unchanged) Skip ../blib/lib/Coro/RWLock.pm (unchanged) Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged) Skip ../blib/lib/Coro/MakeMaker.pm (unchanged) Skip ../blib/lib/Coro/Debug.pm (unchanged) Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged) Skip ../blib/lib/Coro/Channel.pm (unchanged) Skip ../blib/lib/Coro/BDB.pm (unchanged) Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged) Skip ../blib/lib/Coro/Handle.pm (unchanged) Skip ../blib/lib/Coro/Socket.pm (unchanged) Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3889 mv State.xsc State.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.52\" -DXS_VERSION=\"6.52\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.28/CORE" -DCORO_ASM -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c rm -f ../blib/arch/auto/Coro/State/State.so x86_64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \ \ chmod 755 ../blib/arch/auto/Coro/State/State.so Manifying 20 pod documents make[2]: Leaving directory '/<>/Coro' make[2]: Entering directory '/<>/Event' Running Mkbootstrap for Event () "/usr/bin/perl" "/usr/share/perl/5.28.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' Event.xs > Event.xsc chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 cp Event.pm ../blib/lib/Coro/Event.pm mv Event.xsc Event.c x86_64-linux-gnu-gcc -c -I/usr/lib/x86_64-linux-gnu/perl5/5.28/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.52\" -DXS_VERSION=\"6.52\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.28/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c rm -f ../blib/arch/auto/Coro/Event/Event.so x86_64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \ \ chmod 755 ../blib/arch/auto/Coro/Event/Event.so Manifying 1 pod document make[2]: Leaving directory '/<>/Event' make[2]: Entering directory '/<>/EV' Running Mkbootstrap for EV () "/usr/bin/perl" "/usr/share/perl/5.28.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' EV.xs > EV.xsc chmod 644 "EV.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 cp EV.pm ../blib/lib/Coro/EV.pm mv EV.xsc EV.c x86_64-linux-gnu-gcc -c -I/usr/lib/x86_64-linux-gnu/perl5/5.28/EV -I/usr/lib/x86_64-linux-gnu/perl5/5.28 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.52\" -DXS_VERSION=\"6.52\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.28/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c rm -f ../blib/arch/auto/Coro/EV/EV.so x86_64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \ \ chmod 755 ../blib/arch/auto/Coro/EV/EV.so Manifying 1 pod document make[2]: Leaving directory '/<>/EV' Manifying 20 pod documents make[1]: Leaving directory '/<>' dh_auto_test make -j4 test TEST_VERBOSE=1 make[1]: Entering directory '/<>' make[2]: Entering directory '/<>/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[2]: Leaving directory '/<>/Coro' make[2]: Entering directory '/<>/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[2]: Leaving directory '/<>/Event' make[2]: Entering directory '/<>/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[2]: Leaving directory '/<>/EV' make[2]: Entering directory '/<>/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 No tests defined for Coro::State extension. make[2]: Leaving directory '/<>/Coro' make[2]: Entering directory '/<>/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.10 cusr 0.05 csys = 0.19 CPU) Result: PASS make[2]: Leaving directory '/<>/Event' make[2]: Entering directory '/<>/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.07 cusr 0.05 csys = 0.15 CPU) Result: PASS make[2]: Leaving directory '/<>/EV' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_basic.t .......... 1..9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok t/01_process.t ........ 1..13 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok t/02_channel.t ........ 1..19 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok t/03_channel.t ........ 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/04_rwlock.t ......... 1..15 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok t/05_specific.t ....... 1..8 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok t/06_prio.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/07_eval.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/08_join.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/10_bugs.t ........... 1..3 ok 1 ok 2 ok 3 ok t/11_deadlock.t ....... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/12_exit.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/13_diewarn.t ........ 1..7 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok t/14_load.t ........... 1..17 ok 1 # Coro::State () ok 2 # Coro () ok 3 # Coro::MakeMaker () ok 4 # Coro::Signal () ok 5 # Coro::Semaphore () ok 6 # Coro::SemaphoreSet () ok 7 # Coro::Channel () ok 8 # Coro::Specific () ok 9 # Coro::RWLock () ok 10 # Coro::AnyEvent () ok 11 # Coro::Timer () ok 12 # Coro::Util () ok 13 # Coro::Select () ok 14 # Coro::Handle () ok 15 # Coro::Socket () ok 16 # Coro::Storable () ok 17 # Coro::Debug () ok t/15_semaphore.t ...... 1..6 ok 1 # 998 ok 2 ok 3 ok 4 ok 5 ok 6 ok t/16_signal.t ......... 1..18 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok t/17_rouse.t .......... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/18_winder.t ......... 1..17 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok t/19_handle.t ......... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/20_mutual_cancel.t .. 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok All tests successful. Files=20, Tests=196, 0 wallclock secs ( 0.11 usr 0.03 sys + 0.49 cusr 0.09 csys = 0.72 CPU) Result: PASS make[1]: Leaving directory '/<>' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j4 install DESTDIR=/<>/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/<>' make[2]: Entering directory '/<>/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[2]: Leaving directory '/<>/Coro' make[2]: Entering directory '/<>/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[2]: Leaving directory '/<>/Event' make[2]: Entering directory '/<>/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[2]: Leaving directory '/<>/EV' Manifying 20 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/Event/Event.so Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/State/State.so Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/EV/EV.so Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/State.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Debug.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/AIO.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Event.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Timer.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Util.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Handle.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Storable.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Signal.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Channel.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/LWP.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/BDB.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Socket.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/MakeMaker.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/jit-amd64-unix.pl Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Semaphore.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/EV.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Select.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Intro.pod Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/RWLock.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/CoroAPI.h Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/SemaphoreSet.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/AnyEvent.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Specific.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/jit-x86-unix.pl Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro.3pm make[1]: Leaving directory '/<>' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb INFO: pkgstriptranslations version 143 INFO: pkgstriptranslations version 143 pkgstriptranslations: processing libcoro-perl (in debian/libcoro-perl); do_strip: , oemstrip: pkgstriptranslations: processing libcoro-perl-dbgsym (in debian/.debhelper/libcoro-perl/dbgsym-root); do_strip: , oemstrip: pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libcoro-perl/DEBIAN/control, package libcoro-perl, directory debian/libcoro-perl pkgstripfiles: Truncating usr/share/doc/libcoro-perl/changelog.Debian.gz to topmost ten records pkgstripfiles: processing control file: debian/.debhelper/libcoro-perl/dbgsym-root/DEBIAN/control, package libcoro-perl-dbgsym, directory debian/.debhelper/libcoro-perl/dbgsym-root dpkg-deb: building package 'libcoro-perl-dbgsym' in 'debian/.debhelper/scratch-space/build-libcoro-perl/libcoro-perl-dbgsym_6.520-1build1_amd64.deb'. pkgstripfiles: Running PNG optimization (using 4 cpus) for package libcoro-perl ... pkgstripfiles: No PNG files. dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.520-1build1_amd64.deb'. Renaming libcoro-perl-dbgsym_6.520-1build1_amd64.deb to libcoro-perl-dbgsym_6.520-1build1_amd64.ddeb dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary -mLaunchpad Build Daemon >../libcoro-perl_6.520-1build1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build libcoro-perl-6.520 dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 20181103-1111 Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Post Build Chroot | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libcoro-perl_6.520-1build1_amd64.changes: ----------------------------------------- Format: 1.8 Date: Fri, 02 Nov 2018 19:45:42 -0600 Source: libcoro-perl Binary: libcoro-perl Architecture: amd64 Version: 6.520-1build1 Distribution: disco-proposed Urgency: medium Maintainer: Launchpad Build Daemon Changed-By: Adam Conrad Description: libcoro-perl - Perl framework implementing coroutines Changes: libcoro-perl (6.520-1build1) disco; urgency=medium . * No-change rebuild for the perl 5.28 transition. Checksums-Sha1: 64707f1d3cc19fc0948e32448083bb09d8853dc1 207552 libcoro-perl-dbgsym_6.520-1build1_amd64.ddeb 86429faddd8f80bcc5c2eee83990b0b7bece19fa 5205 libcoro-perl_6.520-1build1_amd64.buildinfo 4b8cb8b71965ac1b33d775331d2fe246858af0ab 199568 libcoro-perl_6.520-1build1_amd64.deb Checksums-Sha256: a7fd55241179edfc72b14890afdfcc0b9ff0d8a7611bc3dc4ab9cbccf72358e6 207552 libcoro-perl-dbgsym_6.520-1build1_amd64.ddeb 7b06ce8cce5033a75e3eba2ee794cf58857c010ba8061261c1c254e8025bd077 5205 libcoro-perl_6.520-1build1_amd64.buildinfo a225fa1733e9dd1acef474c18111385870570aeed03947012ac141cc2392d817 199568 libcoro-perl_6.520-1build1_amd64.deb Files: 61cb4e30ef382896bebdb52abb7635c2 207552 debug optional libcoro-perl-dbgsym_6.520-1build1_amd64.ddeb e445108b5f584a3970909c1cf6dd6efc 5205 perl optional libcoro-perl_6.520-1build1_amd64.buildinfo 6dbfe51e62dce30f243a5e2761209531 199568 perl optional libcoro-perl_6.520-1build1_amd64.deb +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libcoro-perl_6.520-1build1_amd64.deb ------------------------------------ new debian package, version 2.0. size 199568 bytes: control archive=2916 bytes. 1645 bytes, 32 lines control 5242 bytes, 66 lines md5sums Package: libcoro-perl Version: 6.520-1build1 Architecture: amd64 Maintainer: Ubuntu Developers Original-Maintainer: Debian Perl Group Installed-Size: 476 Depends: perl (>= 5.28.0-3), perlapi-5.28.0, libc6 (>= 2.4), libanyevent-perl, libcommon-sense-perl, libguard-perl Recommends: libev-perl, libevent-perl, libio-aio-perl, libnet-http-perl Section: perl Priority: optional Multi-Arch: same Homepage: https://metacpan.org/release/Coro Description: Perl framework implementing coroutines Coro is a collection of modules which manages continuations in general, most often in the form of cooperative threads (also called coros, or simply "coro" in the documentation). They do not actually execute at the same time, even on machines with multiple processors. . The specific flavor of thread offered by this module also guarantees you that it will not switch between threads unless necessary. It switches at easily- identified points in your program, so locking and parallel access are rarely an issue, making threaded programming much safer and easier than using other threading models. . Coro provides a full shared address space, which makes communication between threads very easy. A parallel matrix multiplication benchmark runs over 300 times faster on a single core than perl's ithreads on a quad core using all four cores. . This version of Coro has been patched by the Debian Project to provide compatibility with Perl 5.22 and Perl 5.24. Please send bug reports to Debian () and not the original author. drwxr-xr-x root/root 0 2018-11-03 01:45 ./ drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/ drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/lib/ drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/ drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/ drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/ -rw-r--r-- root/root 45566 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro.pm drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/ -rw-r--r-- root/root 4642 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/AIO.pm -rw-r--r-- root/root 13590 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/AnyEvent.pm -rw-r--r-- root/root 1516 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/BDB.pm -rw-r--r-- root/root 4053 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Channel.pm -rw-r--r-- root/root 4677 2015-06-28 22:31 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/CoroAPI.h -rw-r--r-- root/root 16457 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Debug.pm -rw-r--r-- root/root 2616 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/EV.pm -rw-r--r-- root/root 5431 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Event.pm -rw-r--r-- root/root 13820 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Handle.pm -rw-r--r-- root/root 26831 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Intro.pod -rw-r--r-- root/root 4016 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/LWP.pm -rw-r--r-- root/root 3750 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/MakeMaker.pm -rw-r--r-- root/root 2180 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/RWLock.pm -rw-r--r-- root/root 3827 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Select.pm -rw-r--r-- root/root 4408 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Semaphore.pm -rw-r--r-- root/root 4199 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/SemaphoreSet.pm -rw-r--r-- root/root 2294 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Signal.pm -rw-r--r-- root/root 5471 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Socket.pm -rw-r--r-- root/root 1830 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Specific.pm -rw-r--r-- root/root 19437 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/State.pm -rw-r--r-- root/root 3764 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Storable.pm -rw-r--r-- root/root 1657 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Timer.pm -rw-r--r-- root/root 5567 2018-08-14 16:50 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Util.pm -rwxr-xr-x root/root 2769 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/jit-amd64-unix.pl -rwxr-xr-x root/root 2977 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/jit-x86-unix.pl drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/auto/ drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/ drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/EV/ -rw-r--r-- root/root 18200 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/EV/EV.so drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/Event/ -rw-r--r-- root/root 14016 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/Event/Event.so drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/State/ -rw-r--r-- root/root 84256 2018-11-03 01:45 ./usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/State/State.so drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/share/ drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/share/doc/ drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/share/doc/libcoro-perl/ -rw-r--r-- root/root 227 2018-08-18 11:08 ./usr/share/doc/libcoro-perl/NEWS.Debian.gz -rw-r--r-- root/root 277 2005-03-03 17:20 ./usr/share/doc/libcoro-perl/README -rw-r--r-- root/root 1207 2008-03-02 16:10 ./usr/share/doc/libcoro-perl/README.linux-glibc -rw-r--r-- root/root 1608 2018-11-03 01:45 ./usr/share/doc/libcoro-perl/changelog.Debian.gz -rw-r--r-- root/root 6871 2018-08-18 11:08 ./usr/share/doc/libcoro-perl/copyright drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/share/doc/libcoro-perl/examples/ -rw-r--r-- root/root 1714 2011-12-12 15:18 ./usr/share/doc/libcoro-perl/examples/bench -rw-r--r-- root/root 316 2008-11-24 04:56 ./usr/share/doc/libcoro-perl/examples/dns -rw-r--r-- root/root 1222 2008-11-24 04:56 ./usr/share/doc/libcoro-perl/examples/event -rw-r--r-- root/root 526 2008-11-24 07:55 ./usr/share/doc/libcoro-perl/examples/lwp -rw-r--r-- root/root 3188 2008-06-03 13:35 ./usr/share/doc/libcoro-perl/examples/myhttpd.gz -rw-r--r-- root/root 618 2001-07-17 00:24 ./usr/share/doc/libcoro-perl/examples/prodcons1 -rw-r--r-- root/root 665 2006-11-06 19:40 ./usr/share/doc/libcoro-perl/examples/prodcons2 -rw-r--r-- root/root 620 2006-11-06 19:40 ./usr/share/doc/libcoro-perl/examples/prodcons3 -rw-r--r-- root/root 752 2007-04-14 15:06 ./usr/share/doc/libcoro-perl/examples/readline drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/share/man/ drwxr-xr-x root/root 0 2018-11-03 01:45 ./usr/share/man/man3/ -rw-r--r-- root/root 17634 2018-11-03 01:45 ./usr/share/man/man3/Coro.3pm.gz -rw-r--r-- root/root 2925 2018-11-03 01:45 ./usr/share/man/man3/Coro::AIO.3pm.gz -rw-r--r-- root/root 5475 2018-11-03 01:45 ./usr/share/man/man3/Coro::AnyEvent.3pm.gz -rw-r--r-- root/root 1740 2018-11-03 01:45 ./usr/share/man/man3/Coro::BDB.3pm.gz -rw-r--r-- root/root 2651 2018-11-03 01:45 ./usr/share/man/man3/Coro::Channel.3pm.gz -rw-r--r-- root/root 3912 2018-11-03 01:45 ./usr/share/man/man3/Coro::Debug.3pm.gz -rw-r--r-- root/root 2218 2018-11-03 01:45 ./usr/share/man/man3/Coro::EV.3pm.gz -rw-r--r-- root/root 2871 2018-11-03 01:45 ./usr/share/man/man3/Coro::Event.3pm.gz -rw-r--r-- root/root 3290 2018-11-03 01:45 ./usr/share/man/man3/Coro::Handle.3pm.gz -rw-r--r-- root/root 11687 2018-11-03 01:45 ./usr/share/man/man3/Coro::Intro.3pm.gz -rw-r--r-- root/root 2728 2018-11-03 01:45 ./usr/share/man/man3/Coro::LWP.3pm.gz -rw-r--r-- root/root 2500 2018-11-03 01:45 ./usr/share/man/man3/Coro::MakeMaker.3pm.gz -rw-r--r-- root/root 1711 2018-11-03 01:45 ./usr/share/man/man3/Coro::RWLock.3pm.gz -rw-r--r-- root/root 2198 2018-11-03 01:45 ./usr/share/man/man3/Coro::Select.3pm.gz -rw-r--r-- root/root 2673 2018-11-03 01:45 ./usr/share/man/man3/Coro::Semaphore.3pm.gz -rw-r--r-- root/root 2220 2018-11-03 01:45 ./usr/share/man/man3/Coro::SemaphoreSet.3pm.gz -rw-r--r-- root/root 1995 2018-11-03 01:45 ./usr/share/man/man3/Coro::Signal.3pm.gz -rw-r--r-- root/root 2199 2018-11-03 01:45 ./usr/share/man/man3/Coro::Socket.3pm.gz -rw-r--r-- root/root 1813 2018-11-03 01:45 ./usr/share/man/man3/Coro::Specific.3pm.gz -rw-r--r-- root/root 8878 2018-11-03 01:45 ./usr/share/man/man3/Coro::State.3pm.gz -rw-r--r-- root/root 2155 2018-11-03 01:45 ./usr/share/man/man3/Coro::Storable.3pm.gz -rw-r--r-- root/root 1682 2018-11-03 01:45 ./usr/share/man/man3/Coro::Timer.3pm.gz -rw-r--r-- root/root 2589 2018-11-03 01:45 ./usr/share/man/man3/Coro::Util.3pm.gz +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not removing build depends: as requested +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build-Space: 5380 Build-Time: 15 Distribution: disco-proposed Host Architecture: amd64 Install-Time: 11 Job: libcoro-perl_6.520-1build1.dsc Machine Architecture: amd64 Package: libcoro-perl Package-Time: 26 Source-Version: 6.520-1build1 Space: 5380 Status: successful Version: 6.520-1build1 -------------------------------------------------------------------------------- Finished at 20181103-1111 Build needed 00:00:26, 5380k disc space RUN: /usr/share/launchpad-buildd/slavebin/in-target scan-for-processes --backend=chroot --series=disco --arch=amd64 PACKAGEBUILD-15602599 Scanning for processes to kill in build PACKAGEBUILD-15602599