RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '778029-1834842', '/home/buildd/filecache-default/05ed72be0d6b3618e2e22266fc9a300b75f69100'] Synching the system clock with the buildd NTP service... 25 Nov 18:32:44 ntpdate[5173]: adjust time server 10.211.37.1 offset 0.000685 sec Unpacking chroot for build 778029-1834842 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '778029-1834842'] Mounting chroot for build 778029-1834842 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '778029-1834842', 'universe'] Attempting OGRE for universe in build-778029-1834842 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '778029-1834842', 'deb http://ftpmaster.internal/ubuntu jaunty main universe'] Overriding sources.list in build-778029-1834842 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '778029-1834842'] Updating debian chroot for build 778029-1834842 Get:1 http://ftpmaster.internal jaunty Release.gpg [189B] Get:2 http://ftpmaster.internal jaunty Release [74.6kB] Ign http://ftpmaster.internal jaunty/main Packages/DiffIndex Get:3 http://ftpmaster.internal jaunty/universe Packages [2439kB] Get:4 http://ftpmaster.internal jaunty/main Packages [1177kB] Fetched 3691kB in 9s (395kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '778029-1834842', '--nolog', '--batch', '--archive=ubuntu', '--purpose=PRIMARY', '--dist=jaunty', '--comp=universe', 'libcrypt-eksblowfish-perl_0.005-1.dsc'] Initiating build Automatic build of libcrypt-eksblowfish-perl_0.005-1 on prumnopitys by sbuild/armel 1.170.5 Build started at 20081125-1833 ****************************************************************************** libcrypt-eksblowfish-perl_0.005-1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 4.0.0), perl (>= 5.8.4-8), libxsloader-perl, libmodule-build-perl Checking for already installed source dependencies... debhelper: missing perl: already installed (5.10.0-17ubuntu1 >= 5.8.4-8 is satisfied) libxsloader-perl: already installed (=*=PROVIDED=*=) libmodule-build-perl: already installed (=*=PROVIDED=*=) Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils curl file gettext gettext-base groff-base html2text intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libcurl3 libio-compress-base-perl libio-compress-zlib-perl libmagic1 libmail-sendmail-perl libsys-hostname-long-perl man-db po-debconf Suggested packages: wamerican wordlist whois vacation dh-make cvs gettext-doc groff less www-browser libmail-box-perl The following NEW packages will be installed: bsdmainutils curl debhelper file gettext gettext-base groff-base html2text intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libcurl3 libio-compress-base-perl libio-compress-zlib-perl libmagic1 libmail-sendmail-perl libsys-hostname-long-perl man-db po-debconf 0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/6045kB of archives. After this operation, 21.6MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file bsdmainutils gettext-base groff-base libcompress-raw-zlib-perl libio-compress-base-perl libio-compress-zlib-perl libcompress-zlib-perl man-db libcurl3 curl html2text gettext intltool-debian po-debconf debhelper libsys-hostname-long-perl libmail-sendmail-perl dpkg-preconfigure: unable to re-open stdin: Authentication warning overridden. Selecting previously deselected package libmagic1. (Reading database ... 9539 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_4.26-1_armel.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.26-1_armel.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_6.1.10ubuntu3_armel.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-4ubuntu1_armel.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.18.1.1-21_armel.deb) ... Selecting previously deselected package libcompress-raw-zlib-perl. Unpacking libcompress-raw-zlib-perl (from .../libcompress-raw-zlib-perl_2.015-1_armel.deb) ... Selecting previously deselected package libio-compress-base-perl. Unpacking libio-compress-base-perl (from .../libio-compress-base-perl_2.015-1_all.deb) ... Selecting previously deselected package libio-compress-zlib-perl. Unpacking libio-compress-zlib-perl (from .../libio-compress-zlib-perl_2.015-1_all.deb) ... Selecting previously deselected package libcompress-zlib-perl. Unpacking libcompress-zlib-perl (from .../libcompress-zlib-perl_2.015-1_all.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.3-1_armel.deb) ... Selecting previously deselected package libcurl3. Unpacking libcurl3 (from .../libcurl3_7.18.2-7ubuntu2_armel.deb) ... Selecting previously deselected package curl. Unpacking curl (from .../curl_7.18.2-7ubuntu2_armel.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-5_armel.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-4ubuntu1_armel.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.15ubuntu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.0.17ubuntu1_all.deb) ... Selecting previously deselected package libsys-hostname-long-perl. Unpacking libsys-hostname-long-perl (from .../libsys-hostname-long-perl_1.4-2_all.deb) ... Selecting previously deselected package libmail-sendmail-perl. Unpacking libmail-sendmail-perl (from .../libmail-sendmail-perl_0.79.16-1_all.deb) ... Setting up libmagic1 (4.26-1) ... Setting up file (4.26-1) ... Setting up bsdmainutils (6.1.10ubuntu3) ... Setting up gettext-base (0.17-4ubuntu1) ... Setting up groff-base (1.18.1.1-21) ... Setting up libcompress-raw-zlib-perl (2.015-1) ... Setting up libio-compress-base-perl (2.015-1) ... Setting up libio-compress-zlib-perl (2.015-1) ... Setting up libcompress-zlib-perl (2.015-1) ... Setting up man-db (2.5.3-1) ... Building database of manual pages ... ... skipping, since this is a buildd Setting up libcurl3 (7.18.2-7ubuntu2) ... Setting up curl (7.18.2-7ubuntu2) ... Setting up html2text (1.3.2a-5) ... Setting up gettext (0.17-4ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.15ubuntu1) ... Setting up debhelper (7.0.17ubuntu1) ... Setting up libsys-hostname-long-perl (1.4-2) ... Setting up libmail-sendmail-perl (0.79.16-1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place modified: mtab Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.8+20081027-0ubuntu10 make_3.81-5 dpkg-dev_1.14.22ubuntu1 g++-4.3_4.3.2-2ubuntu4 gcc-4.3_4.3.2-2ubuntu4 binutils_2.19-0ubuntu2 libstdc++6_4.3.2-2ubuntu4 libstdc++6-4.3-dev_4.3.2-2ubuntu4 ------------------------------------------------------------------------------ sh: gcc: command not found dpkg-source: warning: Couldn't determine gcc system type, falling back to default (native compilation) gpg: Signature made Thu May 8 23:15:32 2008 BST using DSA key ID 54C1C1C9 gpg: Can't check signature: public key not found dpkg-source: extracting libcrypt-eksblowfish-perl in libcrypt-eksblowfish-perl-0.005 dpkg-source: info: unpacking libcrypt-eksblowfish-perl_0.005.orig.tar.gz dpkg-source: info: applying libcrypt-eksblowfish-perl_0.005-1.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package libcrypt-eksblowfish-perl dpkg-buildpackage: source version 0.005-1 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean dh_testdir dh_testroot dh_clean build-stamp install-stamp # Add commands to clean up after the build process here [ ! -f Build ] || /usr/bin/perl Build --allow_mb_mismatch 1 distclean debian/rules build dh_testdir # Add commands to compile the package here /usr/bin/perl Build.PL installdirs=vendor Checking whether your kit is complete... Looks good Checking prerequisites... Looks good Creating new 'Build' script for 'Crypt-Eksblowfish' version '0.005' OPTIMIZE="-Wall -g -O2" /usr/bin/perl Build Copying lib/Crypt/Eksblowfish/Bcrypt.pm -> blib/lib/Crypt/Eksblowfish/Bcrypt.pm Copying lib/Crypt/Eksblowfish/Uklblowfish.pm -> blib/lib/Crypt/Eksblowfish/Uklblowfish.pm Copying lib/Crypt/Eksblowfish/Subkeyed.pm -> blib/lib/Crypt/Eksblowfish/Subkeyed.pm Copying lib/Crypt/Eksblowfish/Blowfish.pm -> blib/lib/Crypt/Eksblowfish/Blowfish.pm Copying lib/Crypt/Eksblowfish.pm -> blib/lib/Crypt/Eksblowfish.pm Copying lib/Crypt/Eksblowfish/Family.pm -> blib/lib/Crypt/Eksblowfish/Family.pm lib/Crypt/Eksblowfish.xs -> lib/Crypt/Eksblowfish.c cc -I/usr/lib/perl/5.10/CORE -DXS_VERSION="0.005" -DVERSION="0.005" -fPIC -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -o lib/Crypt/Eksblowfish.o lib/Crypt/Eksblowfish.c lib/Crypt/Eksblowfish.xs: In function 'XS_Crypt__Eksblowfish__Subkeyed_new_from_subkeys': lib/Crypt/Eksblowfish.xs:689: warning: format not a string literal and no format arguments lib/Crypt/Eksblowfish.xs: In function 'XS_Crypt__Eksblowfish__Subkeyed_new_initial': lib/Crypt/Eksblowfish.xs:732: warning: format not a string literal and no format arguments lib/Crypt/Eksblowfish.xs: In function 'XS_Crypt__Eksblowfish_new': lib/Crypt/Eksblowfish.xs:762: warning: format not a string literal and no format arguments lib/Crypt/Eksblowfish.xs: In function 'XS_Crypt__Eksblowfish__Blowfish_new': lib/Crypt/Eksblowfish.xs:784: warning: format not a string literal and no format arguments lib/Crypt/Eksblowfish.xs: In function 'XS_Crypt__Eksblowfish__Uklblowfish_new': lib/Crypt/Eksblowfish.xs:805: warning: format not a string literal and no format arguments ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/Crypt/Eksblowfish/Eksblowfish.bs') cc -shared -O2 -g -L/usr/local/lib -o blib/arch/auto/Crypt/Eksblowfish/Eksblowfish.so lib/Crypt/Eksblowfish.o Manifying blib/lib/Crypt/Eksblowfish/Subkeyed.pm -> blib/libdoc/Crypt::Eksblowfish::Subkeyed.3pm Manifying blib/lib/Crypt/Eksblowfish/Blowfish.pm -> blib/libdoc/Crypt::Eksblowfish::Blowfish.3pm Manifying blib/lib/Crypt/Eksblowfish/Bcrypt.pm -> blib/libdoc/Crypt::Eksblowfish::Bcrypt.3pm Manifying blib/lib/Crypt/Eksblowfish/Uklblowfish.pm -> blib/libdoc/Crypt::Eksblowfish::Uklblowfish.3pm Manifying blib/lib/Crypt/Eksblowfish.pm -> blib/libdoc/Crypt::Eksblowfish.3pm Manifying blib/lib/Crypt/Eksblowfish/Family.pm -> blib/libdoc/Crypt::Eksblowfish::Family.3pm /usr/bin/perl Build test t/base64.........ok t/bcrypt.........ok t/bcrypt_hash....ok t/blowfish.......ok t/eksblowfish....ok t/family.........ok t/pod_cvg........skipped all skipped: Test::Pod::Coverage not available t/pod_syn........skipped all skipped: Test::Pod not available t/subkey.........ok t/uklblowfish....ok t/utf8...........ok All tests successful, 2 tests skipped. Files=11, Tests=1151, 11 wallclock secs (10.27 cusr + 0.20 csys = 10.47 CPU) touch build-stamp /usr/bin/fakeroot debian/rules binary-arch dh_testdir dh_testroot dh_clean -k # Add commands to install the package into /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl here /usr/bin/perl Build install destdir=/build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl create_packlist=0 Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/lib/perl5/auto/Crypt/Eksblowfish/Eksblowfish.bs Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/lib/perl5/auto/Crypt/Eksblowfish/Eksblowfish.so Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/lib/perl5/Crypt/Eksblowfish.pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/lib/perl5/Crypt/Eksblowfish/Uklblowfish.pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/lib/perl5/Crypt/Eksblowfish/Bcrypt.pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/lib/perl5/Crypt/Eksblowfish/Blowfish.pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/lib/perl5/Crypt/Eksblowfish/Family.pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/lib/perl5/Crypt/Eksblowfish/Subkeyed.pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/share/man/man3/Crypt::Eksblowfish::Subkeyed.3pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/share/man/man3/Crypt::Eksblowfish::Family.3pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/share/man/man3/Crypt::Eksblowfish::Uklblowfish.3pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/share/man/man3/Crypt::Eksblowfish::Blowfish.3pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/share/man/man3/Crypt::Eksblowfish.3pm Installing /build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl/usr/share/man/man3/Crypt::Eksblowfish::Bcrypt.3pm touch install-stamp dh_testdir dh_testroot dh_installdocs README dh_installexamples dh_installchangelogs Changes dh_shlibdeps dh_strip dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: libcrypt-eksblowfish-perl dh_strip debug symbol extraction: packages to act on: libcrypt-eksblowfish-perl dh_strip debug symbol extraction: ignored packages: pkgstriptranslations: processing control file: ./debian/libcrypt-eksblowfish-perl-dbgsym/DEBIAN/control, package libcrypt-eksblowfish-perl-dbgsym, directory ./debian/libcrypt-eksblowfish-perl-dbgsym pkgstriptranslations: libcrypt-eksblowfish-perl-dbgsym does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu MOTU Developers " warning, `/build/buildd/libcrypt-eksblowfish-perl-0.005/debian/libcrypt-eksblowfish-perl-dbgsym/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `libcrypt-eksblowfish-perl-dbgsym' in `../libcrypt-eksblowfish-perl-dbgsym_0.005-1_armel.ddeb'. dh_perl dh_compress dh_fixperms dh_installdeb dh_gencontrol dpkg-gencontrol: warning: unknown substitution variable ${misc:Depends} dh_md5sums dh_builddeb pkgstriptranslations: processing control file: ./debian/libcrypt-eksblowfish-perl/DEBIAN/control, package libcrypt-eksblowfish-perl, directory ./debian/libcrypt-eksblowfish-perl pkgstriptranslations: libcrypt-eksblowfish-perl does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu MOTU Developers " warning, `debian/libcrypt-eksblowfish-perl/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `libcrypt-eksblowfish-perl' in `../libcrypt-eksblowfish-perl_0.005-1_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../libcrypt-eksblowfish-perl_0.005-1_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20081125-1834 Publishing debug debs. chroot-autobuild/build/buildd/libcrypt-eksblowfish-perl_0.005-1_armel.deb: new debian package, version 2.0. size 49556 bytes: control archive= 1501 bytes. 1406 bytes, 27 lines control 1499 bytes, 18 lines md5sums Package: libcrypt-eksblowfish-perl Version: 0.005-1 Architecture: armel Maintainer: Ubuntu MOTU Developers Original-Maintainer: Ivan Kohler Installed-Size: 176 Depends: perl (>= 5.10.0-17ubuntu1), perlapi-5.10.0, libc6 (>= 2.4), libxsloader-perl Section: perl Priority: optional Description: Perl module implementing the Eksblowfish block cipher An object of this type encapsulates a keyed instance of the Eksblowfish block cipher, ready to encrypt and decrypt. . Eksblowfish is a variant of the Blowfish cipher, modified to make the key setup very expensive. ("Eks" stands for "expensive key schedule".) This doesn't make it significantly cryptographically stronger, but is intended to hinder brute-force attacks. It also makes it unsuitable for any application requiring key agility. It was designed by Niels Provos and David Mazieres for password hashing in OpenBSD. See Crypt::Eksblowfish::Bcrypt for the hash algorithm. . Eksblowfish is a parameterised (family-keyed) cipher. It takes a cost parameter that controls how expensive the key scheduling is. It also takes a family key, known as the "salt". Cost and salt parameters together define a cipher family. Within each family, a key determines an encryption function in the usual way. See Crypt::Eksblowfish::Family for a way to encapsulate an Eksblowfish cipher family. chroot-autobuild/build/buildd/libcrypt-eksblowfish-perl_0.005-1_armel.deb: drwxr-xr-x root/root 0 2008-11-25 18:34 ./ drwxr-xr-x root/root 0 2008-11-25 18:33 ./usr/ drwxr-xr-x root/root 0 2008-11-25 18:33 ./usr/share/ drwxr-xr-x root/root 0 2008-11-25 18:33 ./usr/share/doc/ drwxr-xr-x root/root 0 2008-11-25 18:34 ./usr/share/doc/libcrypt-eksblowfish-perl/ -rw-r--r-- root/root 939 2008-11-25 18:33 ./usr/share/doc/libcrypt-eksblowfish-perl/copyright -rw-r--r-- root/root 1087 2008-04-06 01:22 ./usr/share/doc/libcrypt-eksblowfish-perl/changelog.gz -rw-r--r-- root/root 658 2008-11-25 18:33 ./usr/share/doc/libcrypt-eksblowfish-perl/changelog.Debian.gz -rw-r--r-- root/root 1526 2008-04-06 01:22 ./usr/share/doc/libcrypt-eksblowfish-perl/README drwxr-xr-x root/root 0 2008-11-25 18:33 ./usr/share/man/ drwxr-xr-x root/root 0 2008-11-25 18:34 ./usr/share/man/man3/ -rw-r--r-- root/root 4507 2008-11-25 18:33 ./usr/share/man/man3/Crypt::Eksblowfish::Subkeyed.3pm.gz -rw-r--r-- root/root 3306 2008-11-25 18:33 ./usr/share/man/man3/Crypt::Eksblowfish::Blowfish.3pm.gz -rw-r--r-- root/root 3283 2008-11-25 18:33 ./usr/share/man/man3/Crypt::Eksblowfish::Bcrypt.3pm.gz -rw-r--r-- root/root 4073 2008-11-25 18:33 ./usr/share/man/man3/Crypt::Eksblowfish::Uklblowfish.3pm.gz -rw-r--r-- root/root 3576 2008-11-25 18:33 ./usr/share/man/man3/Crypt::Eksblowfish.3pm.gz -rw-r--r-- root/root 3007 2008-11-25 18:33 ./usr/share/man/man3/Crypt::Eksblowfish::Family.3pm.gz drwxr-xr-x root/root 0 2008-11-25 18:33 ./usr/lib/ drwxr-xr-x root/root 0 2008-11-25 18:33 ./usr/lib/perl5/ drwxr-xr-x root/root 0 2008-11-25 18:33 ./usr/lib/perl5/Crypt/ -rw-r--r-- root/root 4503 2008-11-25 18:33 ./usr/lib/perl5/Crypt/Eksblowfish.pm drwxr-xr-x root/root 0 2008-11-25 18:33 ./usr/lib/perl5/Crypt/Eksblowfish/ -rw-r--r-- root/root 5697 2008-11-25 18:33 ./usr/lib/perl5/Crypt/Eksblowfish/Uklblowfish.pm -rw-r--r-- root/root 4974 2008-11-25 18:33 ./usr/lib/perl5/Crypt/Eksblowfish/Bcrypt.pm -rw-r--r-- root/root 4029 2008-11-25 18:33 ./usr/lib/perl5/Crypt/Eksblowfish/Blowfish.pm -rw-r--r-- root/root 3761 2008-11-25 18:33 ./usr/lib/perl5/Crypt/Eksblowfish/Family.pm -rw-r--r-- root/root 6898 2008-11-25 18:33 ./usr/lib/perl5/Crypt/Eksblowfish/Subkeyed.pm drwxr-xr-x root/root 0 2008-11-25 18:33 ./usr/lib/perl5/auto/ drwxr-xr-x root/root 0 2008-11-25 18:33 ./usr/lib/perl5/auto/Crypt/ drwxr-xr-x root/root 0 2008-11-25 18:34 ./usr/lib/perl5/auto/Crypt/Eksblowfish/ -rw-r--r-- root/root 0 2008-11-25 18:33 ./usr/lib/perl5/auto/Crypt/Eksblowfish/Eksblowfish.bs -rw-r--r-- root/root 30160 2008-11-25 18:34 ./usr/lib/perl5/auto/Crypt/Eksblowfish/Eksblowfish.so libcrypt-eksblowfish-perl_0.005-1_armel.changes: Format: 1.8 Date: Wed, 07 May 2008 19:57:56 -0700 Source: libcrypt-eksblowfish-perl Binary: libcrypt-eksblowfish-perl Architecture: armel Version: 0.005-1 Distribution: jaunty Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: Ivan Kohler Description: libcrypt-eksblowfish-perl - Perl module implementing the Eksblowfish block cipher Changes: libcrypt-eksblowfish-perl (0.005-1) unstable; urgency=low . * New upstream release. Checksums-Sha1: 57fd124badd2856bf191f94a1f1a8542791573ab 49556 libcrypt-eksblowfish-perl_0.005-1_armel.deb Checksums-Sha256: c043e4e183b4c23bb2262f73213a864f7ca2afd1af459165792de36b7262b9df 49556 libcrypt-eksblowfish-perl_0.005-1_armel.deb Files: e0b11e3e9c27465d49e256bc2e24d3de 49556 perl optional libcrypt-eksblowfish-perl_0.005-1_armel.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/libcrypt-eksblowfish-perl-0.005 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --root=/home/buildd/build-778029-1834842/chroot-autobuild --purge intltool-debian groff-base libio-compress-base-perl libcurl3 libcompress-zlib-perl gettext file html2text curl gettext-base debhelper po-debconf libmagic1 libcompress-raw-zlib-perl libio-compress-zlib-perl libsys-hostname-long-perl bsdmainutils libmail-sendmail-perl man-db (Reading database ... 10685 files and directories currently installed.) Removing libcompress-zlib-perl ... Removing curl ... Removing debhelper ... Removing po-debconf ... Removing libio-compress-zlib-perl ... Removing libmail-sendmail-perl ... Removing man-db ... Purging configuration files for man-db ... Removing intltool-debian ... Removing groff-base ... Purging configuration files for groff-base ... Removing libio-compress-base-perl ... Removing libcurl3 ... Purging configuration files for libcurl3 ... Removing gettext ... Removing file ... Purging configuration files for file ... Removing html2text ... Purging configuration files for html2text ... Removing gettext-base ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libcompress-raw-zlib-perl ... Removing libsys-hostname-long-perl ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Processing triggers for libc6 ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20081125-1834 Build needed 00:00:54, 888k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '778029-1834842'] Scanning for processes to kill in build 778029-1834842... Scanning for processes to kill in build /home/buildd/build-778029-1834842/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '778029-1834842'] Unmounting chroot for build 778029-1834842... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '778029-1834842'] Removing build 778029-1834842