RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', 'f6e33a4ab63709a992b2c78dc5444d1722f22ea4', '/home/buildd/filecache-default/8b669016202bc91bd6cca25d2a92d8606492bf56'] Synching the system clock with the buildd NTP service... 8 May 12:13:46 ntpdate[1303]: adjust time server 10.211.37.1 offset 0.000035 sec Unpacking chroot for build f6e33a4ab63709a992b2c78dc5444d1722f22ea4 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', 'f6e33a4ab63709a992b2c78dc5444d1722f22ea4'] Mounting chroot for build f6e33a4ab63709a992b2c78dc5444d1722f22ea4 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', 'f6e33a4ab63709a992b2c78dc5444d1722f22ea4', 'deb http://ftpmaster.internal/ubuntu oneiric main universe'] Overriding sources.list in build-f6e33a4ab63709a992b2c78dc5444d1722f22ea4 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', 'f6e33a4ab63709a992b2c78dc5444d1722f22ea4', 'amd64'] Updating debian chroot for build f6e33a4ab63709a992b2c78dc5444d1722f22ea4 Ign http://ftpmaster.internal oneiric InRelease Get:1 http://ftpmaster.internal oneiric Release.gpg [198 B] Get:2 http://ftpmaster.internal oneiric Release [39.8 kB] Get:3 http://ftpmaster.internal oneiric/main amd64 Packages [1571 kB] Get:4 http://ftpmaster.internal oneiric/universe amd64 Packages [6078 kB] Ign http://ftpmaster.internal oneiric/main TranslationIndex Ign http://ftpmaster.internal oneiric/universe TranslationIndex Ign http://ftpmaster.internal oneiric/main Translation-en Ign http://ftpmaster.internal oneiric/universe Translation-en Fetched 7689 kB in 1s (3900 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: binutils cpp-4.6 g++-4.6 gcc-4.6 gcc-4.6-base libgcc1 libgomp1 libquadmath0 libstdc++6 libstdc++6-4.6-dev 10 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 24.0 MB of archives. After this operation, 2204 kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libgomp1 gcc-4.6-base libgcc1 cpp-4.6 libquadmath0 libstdc++6-4.6-dev g++-4.6 gcc-4.6 libstdc++6 binutils Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ oneiric/main libgomp1 amd64 4.6.0-6ubuntu3 [25.5 kB] Get:2 http://ftpmaster.internal/ubuntu/ oneiric/main gcc-4.6-base amd64 4.6.0-6ubuntu3 [14.9 kB] Get:3 http://ftpmaster.internal/ubuntu/ oneiric/main libgcc1 amd64 1:4.6.0-6ubuntu3 [42.5 kB] Get:4 http://ftpmaster.internal/ubuntu/ oneiric/main cpp-4.6 amd64 4.6.0-6ubuntu3 [4777 kB] Get:5 http://ftpmaster.internal/ubuntu/ oneiric/main libquadmath0 amd64 4.6.0-6ubuntu3 [126 kB] Get:6 http://ftpmaster.internal/ubuntu/ oneiric/main libstdc++6-4.6-dev amd64 4.6.0-6ubuntu3 [1644 kB] Get:7 http://ftpmaster.internal/ubuntu/ oneiric/main g++-4.6 amd64 4.6.0-6ubuntu3 [6920 kB] Get:8 http://ftpmaster.internal/ubuntu/ oneiric/main gcc-4.6 amd64 4.6.0-6ubuntu3 [7519 kB] Get:9 http://ftpmaster.internal/ubuntu/ oneiric/main libstdc++6 amd64 4.6.0-6ubuntu3 [328 kB] Get:10 http://ftpmaster.internal/ubuntu/ oneiric/main binutils amd64 2.21.51.20110421-0ubuntu6 [2567 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 24.0 MB in 0s (26.0 MB/s) (Reading database ... 14236 files and directories currently installed.) Preparing to replace libgomp1 4.6.0-6ubuntu2 (using .../libgomp1_4.6.0-6ubuntu3_amd64.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.6-base 4.6.0-6ubuntu2 (using .../gcc-4.6-base_4.6.0-6ubuntu3_amd64.deb) ... Unpacking replacement gcc-4.6-base ... Setting up gcc-4.6-base (4.6.0-6ubuntu3) ... (Reading database ... 14236 files and directories currently installed.) Preparing to replace libgcc1 1:4.6.0-6ubuntu2 (using .../libgcc1_1%3a4.6.0-6ubuntu3_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.6.0-6ubuntu3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14236 files and directories currently installed.) Preparing to replace cpp-4.6 4.6.0-6ubuntu2 (using .../cpp-4.6_4.6.0-6ubuntu3_amd64.deb) ... Unpacking replacement cpp-4.6 ... Preparing to replace libquadmath0 4.6.0-6ubuntu2 (using .../libquadmath0_4.6.0-6ubuntu3_amd64.deb) ... Unpacking replacement libquadmath0 ... Preparing to replace libstdc++6-4.6-dev 4.6.0-6ubuntu2 (using .../libstdc++6-4.6-dev_4.6.0-6ubuntu3_amd64.deb) ... Unpacking replacement libstdc++6-4.6-dev ... Preparing to replace g++-4.6 4.6.0-6ubuntu2 (using .../g++-4.6_4.6.0-6ubuntu3_amd64.deb) ... Unpacking replacement g++-4.6 ... Preparing to replace gcc-4.6 4.6.0-6ubuntu2 (using .../gcc-4.6_4.6.0-6ubuntu3_amd64.deb) ... Unpacking replacement gcc-4.6 ... Preparing to replace libstdc++6 4.6.0-6ubuntu2 (using .../libstdc++6_4.6.0-6ubuntu3_amd64.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.6.0-6ubuntu3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14249 files and directories currently installed.) Preparing to replace binutils 2.21.51.20110421-0ubuntu5 (using .../binutils_2.21.51.20110421-0ubuntu6_amd64.deb) ... Unpacking replacement binutils ... Setting up libgomp1 (4.6.0-6ubuntu3) ... Setting up cpp-4.6 (4.6.0-6ubuntu3) ... Setting up libquadmath0 (4.6.0-6ubuntu3) ... Setting up binutils (2.21.51.20110421-0ubuntu6) ... Setting up gcc-4.6 (4.6.0-6ubuntu3) ... Setting up libstdc++6-4.6-dev (4.6.0-6ubuntu3) ... Setting up g++-4.6 (4.6.0-6ubuntu3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', 'f6e33a4ab63709a992b2c78dc5444d1722f22ea4', 'amd64', 'oneiric', '--nolog', '--batch', '--archive=ubuntu', '--dist=oneiric', '--purpose=PRIMARY', '--architecture=amd64', '--comp=universe', 'libdevice-usb-perl_0.35-1build1.dsc'] Initiating build f6e33a4ab63709a992b2c78dc5444d1722f22ea4 with 8 processor cores. Automatic build of libdevice-usb-perl_0.35-1build1 on allspice by sbuild/amd64 1.170.5 Build started at 20110508-1214 ****************************************************************************** libdevice-usb-perl_0.35-1build1.dsc exists in cwd sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 8), perl, libinline-perl, libusb-dev, libtest-pod-perl, libtest-pod-coverage-perl sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) Checking for already installed source dependencies... debhelper: missing perl: already installed (5.12.3-6ubuntu4) libinline-perl: missing libusb-dev: missing libtest-pod-perl: missing libtest-pod-coverage-perl: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper libinline-perl libusb-dev libtest-pod-perl libtest-pod-coverage-perl Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils file gettext gettext-base groff-base html2text intltool-debian libcroco3 libdevel-symdump-perl libio-stringy-perl libmagic1 libparse-recdescent-perl libpipeline1 libpod-coverage-perl libunistring0 libxml2 man-db po-debconf Suggested packages: wamerican wordlist whois vacation dh-make gettext-doc groff less www-browser libmail-box-perl Recommended packages: curl wget lynx-cur xml-core libmail-sendmail-perl The following NEW packages will be installed: bsdmainutils debhelper file gettext gettext-base groff-base html2text intltool-debian libcroco3 libdevel-symdump-perl libinline-perl libio-stringy-perl libmagic1 libparse-recdescent-perl libpipeline1 libpod-coverage-perl libtest-pod-coverage-perl libtest-pod-perl libunistring0 libusb-dev libxml2 man-db po-debconf 0 upgraded, 23 newly installed, 0 to remove and 0 not upgraded. Need to get 6166 kB of archives. After this operation, 21.6 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file bsdmainutils gettext-base groff-base libpipeline1 libxml2 man-db html2text libcroco3 libunistring0 gettext intltool-debian po-debconf debhelper libdevel-symdump-perl libparse-recdescent-perl libinline-perl libio-stringy-perl libpod-coverage-perl libtest-pod-coverage-perl libtest-pod-perl libusb-dev Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ oneiric/main libmagic1 amd64 5.04-5ubuntu2 [205 kB] Get:2 http://ftpmaster.internal/ubuntu/ oneiric/main file amd64 5.04-5ubuntu2 [22.7 kB] Get:3 http://ftpmaster.internal/ubuntu/ oneiric/main bsdmainutils amd64 8.2.2 [199 kB] Get:4 http://ftpmaster.internal/ubuntu/ oneiric/main gettext-base amd64 0.18.1.1-3ubuntu1 [80.6 kB] Get:5 http://ftpmaster.internal/ubuntu/ oneiric/main groff-base amd64 1.21-5 [1052 kB] Get:6 http://ftpmaster.internal/ubuntu/ oneiric/main libpipeline1 amd64 1.2.0-1 [26.1 kB] Get:7 http://ftpmaster.internal/ubuntu/ oneiric/main libxml2 amd64 2.7.8.dfsg-2 [664 kB] Get:8 http://ftpmaster.internal/ubuntu/ oneiric/main man-db amd64 2.6.0.2-1 [731 kB] Get:9 http://ftpmaster.internal/ubuntu/ oneiric/main html2text amd64 1.3.2a-15 [104 kB] Get:10 http://ftpmaster.internal/ubuntu/ oneiric/main libcroco3 amd64 0.6.2-1 [101 kB] Get:11 http://ftpmaster.internal/ubuntu/ oneiric/main libunistring0 amd64 0.9.3-4 [426 kB] Get:12 http://ftpmaster.internal/ubuntu/ oneiric/main gettext amd64 0.18.1.1-3ubuntu1 [1329 kB] Get:13 http://ftpmaster.internal/ubuntu/ oneiric/main intltool-debian all 0.35.0+20060710.1 [31.6 kB] Get:14 http://ftpmaster.internal/ubuntu/ oneiric/main po-debconf all 1.0.16+nmu1 [212 kB] Get:15 http://ftpmaster.internal/ubuntu/ oneiric/main debhelper all 8.1.6ubuntu1 [484 kB] Get:16 http://ftpmaster.internal/ubuntu/ oneiric/main libdevel-symdump-perl all 2.08-4 [13.8 kB] Get:17 http://ftpmaster.internal/ubuntu/ oneiric/universe libparse-recdescent-perl all 1.965001+dfsg-1 [154 kB] Get:18 http://ftpmaster.internal/ubuntu/ oneiric/universe libinline-perl all 0.47-1 [155 kB] Get:19 http://ftpmaster.internal/ubuntu/ oneiric/main libio-stringy-perl all 2.110-4 [94.7 kB] Get:20 http://ftpmaster.internal/ubuntu/ oneiric/main libpod-coverage-perl all 0.21-1 [22.3 kB] Get:21 http://ftpmaster.internal/ubuntu/ oneiric/main libtest-pod-coverage-perl all 1.08-3 [10.8 kB] Get:22 http://ftpmaster.internal/ubuntu/ oneiric/main libtest-pod-perl all 1.44-1 [10.6 kB] Get:23 http://ftpmaster.internal/ubuntu/ oneiric/main libusb-dev amd64 2:0.1.12-17 [35.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 6166 kB in 0s (17.8 MB/s) Selecting previously deselected package libmagic1. (Reading database ... 14249 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_5.04-5ubuntu2_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../file_5.04-5ubuntu2_amd64.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.2.2_amd64.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.18.1.1-3ubuntu1_amd64.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.21-5_amd64.deb) ... Selecting previously deselected package libpipeline1. Unpacking libpipeline1 (from .../libpipeline1_1.2.0-1_amd64.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.8.dfsg-2_amd64.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.6.0.2-1_amd64.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-15_amd64.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_amd64.deb) ... Selecting previously deselected package libunistring0. Unpacking libunistring0 (from .../libunistring0_0.9.3-4_amd64.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.18.1.1-3ubuntu1_amd64.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16+nmu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_8.1.6ubuntu1_all.deb) ... Selecting previously deselected package libdevel-symdump-perl. Unpacking libdevel-symdump-perl (from .../libdevel-symdump-perl_2.08-4_all.deb) ... Selecting previously deselected package libparse-recdescent-perl. Unpacking libparse-recdescent-perl (from .../libparse-recdescent-perl_1.965001+dfsg-1_all.deb) ... Selecting previously deselected package libinline-perl. Unpacking libinline-perl (from .../libinline-perl_0.47-1_all.deb) ... Selecting previously deselected package libio-stringy-perl. Unpacking libio-stringy-perl (from .../libio-stringy-perl_2.110-4_all.deb) ... Selecting previously deselected package libpod-coverage-perl. Unpacking libpod-coverage-perl (from .../libpod-coverage-perl_0.21-1_all.deb) ... Selecting previously deselected package libtest-pod-coverage-perl. Unpacking libtest-pod-coverage-perl (from .../libtest-pod-coverage-perl_1.08-3_all.deb) ... Selecting previously deselected package libtest-pod-perl. Unpacking libtest-pod-perl (from .../libtest-pod-perl_1.44-1_all.deb) ... Selecting previously deselected package libusb-dev. Unpacking libusb-dev (from .../libusb-dev_2%3a0.1.12-17_amd64.deb) ... Setting up libmagic1 (5.04-5ubuntu2) ... Setting up file (5.04-5ubuntu2) ... Setting up bsdmainutils (8.2.2) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode. Setting up gettext-base (0.18.1.1-3ubuntu1) ... Setting up groff-base (1.21-5) ... Setting up libpipeline1 (1.2.0-1) ... Setting up libxml2 (2.7.8.dfsg-2) ... Setting up man-db (2.6.0.2-1) ... Building database of manual pages ... Setting up html2text (1.3.2a-15) ... Setting up libcroco3 (0.6.2-1) ... Setting up libunistring0 (0.9.3-4) ... Setting up gettext (0.18.1.1-3ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16+nmu1) ... Setting up debhelper (8.1.6ubuntu1) ... Setting up libdevel-symdump-perl (2.08-4) ... Setting up libparse-recdescent-perl (1.965001+dfsg-1) ... Setting up libinline-perl (0.47-1) ... Setting up libio-stringy-perl (2.110-4) ... Setting up libpod-coverage-perl (0.21-1) ... Setting up libtest-pod-coverage-perl (1.08-3) ... Setting up libtest-pod-perl (1.44-1) ... Setting up libusb-dev (2:0.1.12-17) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.13-2ubuntu1 make_3.81-8ubuntu1 dpkg-dev_1.16.0~ubuntu8 gcc-4.6_4.6.0-6ubuntu3 g++-4.6_4.6.0-6ubuntu3 binutils_2.21.51.20110421-0ubuntu6 libstdc++6-4.6-dev_4.6.0-6ubuntu3 libstdc++6_4.6.0-6ubuntu3 ------------------------------------------------------------------------------ dpkg-source: warning: -sn is not a valid option for Dpkg::Source::Package::V3::quilt gpgv: Signature made Sun May 8 11:58:12 2011 UTC using RSA key ID 7D86500B gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./libdevice-usb-perl_0.35-1build1.dsc dpkg-source: info: extracting libdevice-usb-perl in libdevice-usb-perl-0.35 dpkg-source: info: unpacking libdevice-usb-perl_0.35.orig.tar.gz dpkg-source: info: unpacking libdevice-usb-perl_0.35-1build1.debian.tar.gz dpkg-source: info: applying disable-tests dpkg-source: info: applying fix-typo dpkg-source: info: applying fix-buildsystem dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package libdevice-usb-perl dpkg-buildpackage: source version 0.35-1build1 dpkg-source --before-build libdevice-usb-perl-0.35 dpkg-buildpackage: host architecture amd64 /usr/bin/fakeroot debian/rules clean dh clean dh_testdir dh_auto_clean dh_clean debian/rules build dh build dh_testdir dh_auto_configure Checking if your kit is complete... Looks good Writing Makefile for Device::USB dh_auto_build make[1]: Entering directory `/build/buildd/libdevice-usb-perl-0.35' cp lib/Device/USB/Bus.pm blib/lib/Device/USB/Bus.pm cp lib/Device/USB/Device.pm blib/lib/Device/USB/Device.pm cp lib/Device/USB/DevEndpoint.pm blib/lib/Device/USB/DevEndpoint.pm cp lib/Device/USB/DevInterface.pm blib/lib/Device/USB/DevInterface.pm cp lib/Device/USB/FAQ.pod blib/lib/Device/USB/FAQ.pod cp lib/Device/USB/DevConfig.pm blib/lib/Device/USB/DevConfig.pm cp lib/Device/USB.pm blib/lib/Device/USB.pm /usr/bin/perl -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB -e1 0.35 blib/arch Starting Build Preprocess Stage Finished Build Preprocess Stage Starting Build Parse Stage Finished Build Parse Stage Starting Build Glue 1 Stage Finished Build Glue 1 Stage Starting Build Glue 2 Stage Finished Build Glue 2 Stage Starting Build Glue 3 Stage Finished Build Glue 3 Stage Starting Build Compile Stage Starting "perl Makefile.PL" Stage Writing Makefile for Device::USB Finished "perl Makefile.PL" Stage Starting "make" Stage make[2]: Entering directory `/build/buildd/libdevice-usb-perl-0.35/_Inline/build/Device/USB' /usr/bin/perl /usr/share/perl/5.12/ExtUtils/xsubpp -typemap /usr/share/perl/5.12/ExtUtils/typemap USB.xs > USB.xsc && mv USB.xsc USB.c cc -c -I/build/buildd/libdevice-usb-perl-0.35 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"0.35\" -DXS_VERSION=\"0.35\" -fPIC "-I/usr/lib/perl/5.12/CORE" USB.c Running Mkbootstrap for Device::USB () chmod 644 USB.bs rm -f blib/arch/auto/Device/USB/USB.so cc -shared -O2 -g -L/usr/local/lib -fstack-protector USB.o -o blib/arch/auto/Device/USB/USB.so \ -lusb \ chmod 755 blib/arch/auto/Device/USB/USB.so cp USB.bs blib/arch/auto/Device/USB/USB.bs chmod 644 blib/arch/auto/Device/USB/USB.bs make[2]: Leaving directory `/build/buildd/libdevice-usb-perl-0.35/_Inline/build/Device/USB' Finished "make" Stage Starting "make install" Stage make[2]: Entering directory `/build/buildd/libdevice-usb-perl-0.35/_Inline/build/Device/USB' Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/buildd/libdevice-usb-perl-0.35/blib/arch/auto/Device/USB/USB.so Installing /build/buildd/libdevice-usb-perl-0.35/blib/arch/auto/Device/USB/USB.bs make[2]: Leaving directory `/build/buildd/libdevice-usb-perl-0.35/_Inline/build/Device/USB' Finished "make install" Stage Starting Cleaning Up Stage Finished Cleaning Up Stage Finished Build Compile Stage Manifying blib/man3/Device::USB::Bus.3pm Manifying blib/man3/Device::USB::DevEndpoint.3pm Manifying blib/man3/Device::USB::Device.3pm Manifying blib/man3/Device::USB::FAQ.3pm Manifying blib/man3/Device::USB::DevInterface.3pm Manifying blib/man3/Device::USB::DevConfig.3pm Manifying blib/man3/Device::USB.3pm make[1]: Leaving directory `/build/buildd/libdevice-usb-perl-0.35' dh_auto_test make[1]: Entering directory `/build/buildd/libdevice-usb-perl-0.35' PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t # Testing Device::USB 0.35, Perl 5.012003, /usr/bin/perl t/00-load.t ....................... ok t/01-create-usb.t ................. ok t/02-find_busses_devices.t ........ ok t/03-list_busses.t ................ ok t/04-find_device.t ................ ok t/05-find_device_if.t ............. ok t/06-list_devices.t ............... ok t/07-list_devices_if.t ............ ok t/08-get_busses.t ................. ok t/09-usb-bus.t .................... ok t/10-usb-device-accessors.t ....... ok t/11-usb-device-methods.t ......... ok t/12-constants.t .................. ok t/13-bus_find_device_if.t ......... ok t/14-bus_list_devices_if.t ........ ok t/15-usb_dev_configuration.t ...... skipped: No devices found. t/16-usb_dev_interface.t .......... skipped: No devices found. t/17-usb_dev_endpoint.t ........... skipped: No devices found. t/18-usb_device-configurations.t .. ok t/boilerplate.t ................... ok t/pod-coverage.t .................. ok t/pod.t ........................... ok All tests successful. Files=22, Tests=111, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.93 cusr 0.08 csys = 1.07 CPU) Result: PASS make[1]: Leaving directory `/build/buildd/libdevice-usb-perl-0.35' /usr/bin/fakeroot debian/rules binary-arch dh binary-arch dh_testroot -a dh_prep -a dh_installdirs -a dh_auto_install -a make[1]: Entering directory `/build/buildd/libdevice-usb-perl-0.35' Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/lib/perl5/auto/Device/USB/USB.so Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/lib/perl5/auto/Device/USB/USB.bs Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/lib/perl5/Device/USB.pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/lib/perl5/Device/USB/Device.pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/lib/perl5/Device/USB/Bus.pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/lib/perl5/Device/USB/DevInterface.pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/lib/perl5/Device/USB/DevEndpoint.pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/lib/perl5/Device/USB/FAQ.pod Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/lib/perl5/Device/USB/DevConfig.pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevInterface.3pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::FAQ.3pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB.3pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevEndpoint.3pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevConfig.3pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Bus.3pm Installing /build/buildd/libdevice-usb-perl-0.35/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Device.3pm make[1]: Leaving directory `/build/buildd/libdevice-usb-perl-0.35' dh_install -a dh_installdocs -a dh_installchangelogs -a dh_installexamples -a dh_installman -a dh_installcatalogs -a dh_installcron -a dh_installdebconf -a dh_installemacsen -a dh_installifupdown -a dh_installinfo -a dh_installinit -a Duplicate specification "O=s" for option "O" dh_installmenu -a dh_installmime -a dh_installmodules -a dh_installlogcheck -a dh_installlogrotate -a dh_installpam -a dh_installppp -a dh_installudev -a dh_installwm -a dh_installxfonts -a dh_installgsettings -a dh_bugfiles -a dh_ucf -a dh_lintian -a dh_gconf -a dh_icons -a dh_perl -a dh_usrlocal -a dh_link -a dh_compress -a dh_fixperms -a dh_strip -a dh_strip debug symbol extraction: all non-arch-all packages for this build platform amd64: libdevice-usb-perl dh_strip debug symbol extraction: packages to act on: libdevice-usb-perl dh_strip debug symbol extraction: ignored packages: dpkg-deb: building package `libdevice-usb-perl-dbgsym' in `../libdevice-usb-perl-dbgsym_0.35-1build1_amd64.ddeb'. dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dh_md5sums -a dh_builddeb -a INFO: pkgstriptranslations version 97 pkgstriptranslations: processing control file: ./debian/libdevice-usb-perl/DEBIAN/control, package libdevice-usb-perl, directory ./debian/libdevice-usb-perl pkgstriptranslations: libdevice-usb-perl does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libdevice-usb-perl/DEBIAN/control, package libdevice-usb-perl, directory debian/libdevice-usb-perl dpkg-deb: warning: 'debian/libdevice-usb-perl/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `libdevice-usb-perl' in `../libdevice-usb-perl_0.35-1build1_amd64.deb'. dpkg-genchanges -B -mUbuntu/amd64 Build Daemon >../libdevice-usb-perl_0.35-1build1_amd64.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-source --after-build libdevice-usb-perl-0.35 dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20110508-1215 Publishing debug debs. chroot-autobuild/build/buildd/libdevice-usb-perl_0.35-1build1_amd64.deb: new debian package, version 2.0. size 67208 bytes: control archive= 1214 bytes. 769 bytes, 15 lines control 1439 bytes, 19 lines md5sums Package: libdevice-usb-perl Version: 0.35-1build1 Architecture: amd64 Maintainer: Ubuntu Developers Original-Maintainer: Debian Perl Group Installed-Size: 252 Depends: libc6 (>= 2.4), libusb-0.1-4 (>= 2:0.1.12), perl (>= 5.12.3-6ubuntu4), perlapi-5.12.3, libinline-perl Section: perl Priority: optional Homepage: http://search.cpan.org/dist/Device-USB/ Description: Perl module to access USB devices using libusb Device::USB provides a Perl interface to the C library libusb. This library supports a relatively full set of functionality to access a USB device. In addition, Device::USB provides a few convenience features that are intended to produce a more Perl-ish interface. chroot-autobuild/build/buildd/libdevice-usb-perl_0.35-1build1_amd64.deb: drwxr-xr-x root/root 0 2011-05-08 12:15 ./ drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/ drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/share/ drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/share/doc/ drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/share/doc/libdevice-usb-perl/ drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/share/doc/libdevice-usb-perl/examples/ -rw-r--r-- root/root 3124 2006-10-13 02:33 ./usr/share/doc/libdevice-usb-perl/examples/dump_usb.pl -rw-r--r-- root/root 1098 2010-08-10 02:18 ./usr/share/doc/libdevice-usb-perl/copyright -rw-r--r-- root/root 240 2011-05-08 11:58 ./usr/share/doc/libdevice-usb-perl/changelog.Debian.gz drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/share/man/ drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/share/man/man3/ -rw-r--r-- root/root 3283 2011-05-08 12:15 ./usr/share/man/man3/Device::USB::DevConfig.3pm.gz -rw-r--r-- root/root 3014 2011-05-08 12:15 ./usr/share/man/man3/Device::USB::DevEndpoint.3pm.gz -rw-r--r-- root/root 3300 2011-05-08 12:15 ./usr/share/man/man3/Device::USB::DevInterface.3pm.gz -rw-r--r-- root/root 5297 2011-05-08 12:15 ./usr/share/man/man3/Device::USB::Device.3pm.gz -rw-r--r-- root/root 3813 2011-05-08 12:15 ./usr/share/man/man3/Device::USB::FAQ.3pm.gz -rw-r--r-- root/root 4918 2011-05-08 12:15 ./usr/share/man/man3/Device::USB.3pm.gz -rw-r--r-- root/root 3379 2011-05-08 12:15 ./usr/share/man/man3/Device::USB::Bus.3pm.gz drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/lib/ drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/lib/perl5/ drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/lib/perl5/Device/ -rw-r--r-- root/root 26115 2011-05-08 12:15 ./usr/lib/perl5/Device/USB.pm drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/lib/perl5/Device/USB/ -rw-r--r-- root/root 17699 2009-04-02 12:00 ./usr/lib/perl5/Device/USB/Device.pm -rw-r--r-- root/root 4488 2006-09-17 22:53 ./usr/lib/perl5/Device/USB/Bus.pm -rw-r--r-- root/root 4269 2008-06-02 00:45 ./usr/lib/perl5/Device/USB/DevInterface.pm -rw-r--r-- root/root 3173 2008-06-02 00:45 ./usr/lib/perl5/Device/USB/DevEndpoint.pm -rw-r--r-- root/root 4398 2006-09-03 22:43 ./usr/lib/perl5/Device/USB/FAQ.pod -rw-r--r-- root/root 4058 2008-06-02 00:45 ./usr/lib/perl5/Device/USB/DevConfig.pm drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/lib/perl5/auto/ drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/lib/perl5/auto/Device/ drwxr-xr-x root/root 0 2011-05-08 12:15 ./usr/lib/perl5/auto/Device/USB/ -rw-r--r-- root/root 56040 2011-05-08 12:15 ./usr/lib/perl5/auto/Device/USB/USB.so -rw-r--r-- root/root 0 2011-05-08 12:15 ./usr/lib/perl5/auto/Device/USB/USB.bs libdevice-usb-perl_0.35-1build1_amd64.changes: Format: 1.8 Date: Sun, 08 May 2011 12:58:05 +0100 Source: libdevice-usb-perl Binary: libdevice-usb-perl Architecture: amd64 Version: 0.35-1build1 Distribution: oneiric Urgency: low Maintainer: Ubuntu/amd64 Build Daemon Changed-By: Colin Watson Description: libdevice-usb-perl - Perl module to access USB devices using libusb Changes: libdevice-usb-perl (0.35-1build1) oneiric; urgency=low . * Rebuild for Perl 5.12. Checksums-Sha1: d86cede9367b3b8b7ef5f892c566d55c4ab3df1b 67208 libdevice-usb-perl_0.35-1build1_amd64.deb Checksums-Sha256: 414930777684bafc29cbdd2cc586726265e9b5db16d01fd22a82b514cbdd9ab5 67208 libdevice-usb-perl_0.35-1build1_amd64.deb Files: 8b5f00e750547150561ac6b030b62a00 67208 perl optional libdevice-usb-perl_0.35-1build1_amd64.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/libdevice-usb-perl-0.35 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge intltool-debian groff-base libusb-dev libtest-pod-perl gettext file html2text libpod-coverage-perl gettext-base debhelper libio-stringy-perl po-debconf libunistring0 libdevel-symdump-perl libcroco3 libmagic1 libpipeline1 libxml2 bsdmainutils man-db libinline-perl libparse-recdescent-perl libtest-pod-coverage-perl (Reading database ... 15735 files and directories currently installed.) Removing libusb-dev ... Removing libtest-pod-perl ... Removing debhelper ... Removing libio-stringy-perl ... Removing po-debconf ... Removing man-db ... Purging configuration files for man-db ... Removing catpages as well as /var/cache/man hierarchy. Removing libinline-perl ... Removing libparse-recdescent-perl ... Removing libtest-pod-coverage-perl ... Removing intltool-debian ... Removing groff-base ... Purging configuration files for groff-base ... Removing gettext ... Removing file ... Removing html2text ... Purging configuration files for html2text ... Removing libpod-coverage-perl ... Removing gettext-base ... Removing libunistring0 ... Purging configuration files for libunistring0 ... Removing libdevel-symdump-perl ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libpipeline1 ... Purging configuration files for libpipeline1 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20110508-1215 Build needed 00:00:09, 1168k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', 'f6e33a4ab63709a992b2c78dc5444d1722f22ea4'] Scanning for processes to kill in build /home/buildd/build-f6e33a4ab63709a992b2c78dc5444d1722f22ea4/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', 'f6e33a4ab63709a992b2c78dc5444d1722f22ea4'] Unmounting chroot for build f6e33a4ab63709a992b2c78dc5444d1722f22ea4... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', 'f6e33a4ab63709a992b2c78dc5444d1722f22ea4'] Removing build f6e33a4ab63709a992b2c78dc5444d1722f22ea4