RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '351273-832183', '/home/buildd/filecache-default/11a72c053c97b86376551adebb63420ff26a61b6'] Unpacking chroot for build 351273-832183 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '351273-832183'] Mounting chroot for build 351273-832183 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '351273-832183', 'main'] Attempting OGRE for main in build-351273-832183 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '351273-832183'] Updating debian chroot for build 351273-832183 Get:1 http://ftpmaster.internal gutsy Release.gpg [191B] Get:2 http://ftpmaster.internal gutsy Release [57.2kB] Get:3 http://ftpmaster.internal gutsy/main Packages [1055kB] Fetched 1112kB in 1s (933kB/s) Reading package lists... Reading package lists... Building dependency tree... The following NEW packages will be installed: libdevmapper1.02.1 The following packages will be upgraded: apt base-files bash belocs-locales-bin binutils bsdutils ccache coreutils cpio cpp cpp-4.1 dash debianutils diff dmsetup dpkg dpkg-dev e2fslibs e2fsprogs fakeroot findutils g++ g++-4.1 gcc gcc-4.1 gcc-4.1-base gcc-4.2-base gzip initscripts lib64gcc1 libblkid1 libc6 libc6-dev libc6-dev-sparc64 libc6-sparc64 libcomerr2 libdb4.3 libgcc1 libncurses5 libpam-foreground libselinux1 libsepol1 libslang2 libss2 libstdc++6 libstdc++6-4.1-dev libuuid1 linux-libc-dev login lsb-base mktemp mount ncurses-base ncurses-bin passwd python2.5-minimal sed sysv-rc sysvutils tar tzdata util-linux zlib1g 63 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/37.0MB of archives. After unpacking 1241kB of additional disk space will be used. (Reading database ... 9607 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.22-1.5 (using .../linux-libc-dev_2.6.22-6.13_sparc.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libc6-dev-sparc64 2.5-2ubuntu1 (using .../libc6-dev-sparc64_2.5-11ubuntu1_sparc.deb) ... Unpacking replacement libc6-dev-sparc64 ... Preparing to replace libc6-dev 2.5-2ubuntu1 (using .../libc6-dev_2.5-11ubuntu1_sparc.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc6-sparc64 2.5-2ubuntu1 (using .../libc6-sparc64_2.5-11ubuntu1_sparc.deb) ... Unpacking replacement libc6-sparc64 ... Preparing to replace lib64gcc1 1:4.2-20070425-0ubuntu1 (using .../lib64gcc1_1%3a4.2-20070609-1ubuntu1_sparc.deb) ... Unpacking replacement lib64gcc1 ... Preparing to replace libc6 2.5-2ubuntu1 (using .../libc6_2.5-11ubuntu1_sparc.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.5-11ubuntu1) ... Installing new version of config file /etc/init.d/glibc.sh ... (Reading database ... 9599 files and directories currently installed.) Preparing to replace gcc-4.2-base 4.2-20070425-0ubuntu1 (using .../gcc-4.2-base_4.2-20070609-1ubuntu1_sparc.deb) ... Unpacking replacement gcc-4.2-base ... Preparing to replace libgcc1 1:4.2-20070425-0ubuntu1 (using .../libgcc1_1%3a4.2-20070609-1ubuntu1_sparc.deb) ... Unpacking replacement libgcc1 ... Setting up gcc-4.2-base (4.2-20070609-1ubuntu1) ... Setting up libgcc1 (4.2-20070609-1ubuntu1) ... (Reading database ... 9599 files and directories currently installed.) Preparing to replace libstdc++6 4.2-20070425-0ubuntu1 (using .../libstdc++6_4.2-20070609-1ubuntu1_sparc.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.2-20070609-1ubuntu1) ... (Reading database ... 9599 files and directories currently installed.) Preparing to replace base-files 4.0ubuntu1 (using .../base-files_4.0.0ubuntu1_sparc.deb) ... Unpacking replacement base-files ... Setting up base-files (4.0.0ubuntu1) ... (Reading database ... 9601 files and directories currently installed.) Preparing to replace debianutils 2.18 (using .../debianutils_2.21_sparc.deb) ... Unpacking replacement debianutils ... Setting up debianutils (2.21) ... (Reading database ... 9601 files and directories currently installed.) Preparing to replace bash 3.2-0ubuntu7 (using .../bash_3.2-0ubuntu8_sparc.deb) ... Unpacking replacement bash ... Setting up bash (3.2-0ubuntu8) ... (Reading database ... 9601 files and directories currently installed.) Preparing to replace bsdutils 1:2.12r-17ubuntu2 (using .../bsdutils_1%3a2.12r-19ubuntu1_sparc.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (2.12r-19ubuntu1) ... (Reading database ... 9601 files and directories currently installed.) Preparing to replace libsepol1 2.0.1-1 (using .../libsepol1_2.0.3-1_sparc.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.0.3-1) ... (Reading database ... 9601 files and directories currently installed.) Preparing to replace libselinux1 1.32-3ubuntu1 (using .../libselinux1_2.0.15-2ubuntu1_sparc.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.0.15-2ubuntu1) ... (Reading database ... 9601 files and directories currently installed.) Preparing to replace coreutils 5.97-5.2ubuntu3 (using .../coreutils_5.97-5.3ubuntu1_sparc.deb) ... Unpacking replacement coreutils ... Setting up coreutils (5.97-5.3ubuntu1) ... (Reading database ... 9601 files and directories currently installed.) Preparing to replace diff 2.8.1-11ubuntu4 (using .../diff_2.8.1-12ubuntu1_sparc.deb) ... Unpacking replacement diff ... Setting up diff (2.8.1-12ubuntu1) ... (Reading database ... 9601 files and directories currently installed.) Preparing to replace dpkg 1.13.24ubuntu6 (using .../dpkg_1.14.4+svn20070602r802-0ubuntu1_sparc.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.14.4+svn20070602r802-0ubuntu1) ... (Reading database ... 9603 files and directories currently installed.) Preparing to replace e2fslibs 1.39+1.40-WIP-2006.11.14+dfsg-2ubuntu1 (using .../e2fslibs_1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1_sparc.deb) ... Unpacking replacement e2fslibs ... Setting up e2fslibs (1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1) ... (Reading database ... 9603 files and directories currently installed.) Preparing to replace e2fsprogs 1.39+1.40-WIP-2006.11.14+dfsg-2ubuntu1 (using .../e2fsprogs_1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1_sparc.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1) ... (Reading database ... 9603 files and directories currently installed.) Preparing to replace findutils 4.2.28-2 (using .../findutils_4.2.31-1_sparc.deb) ... Unpacking replacement findutils ... Setting up findutils (4.2.31-1) ... (Reading database ... 9603 files and directories currently installed.) Preparing to replace gzip 1.3.9-2 (using .../gzip_1.3.12-2_sparc.deb) ... Unpacking replacement gzip ... Setting up gzip (1.3.12-2) ... (Reading database ... 9604 files and directories currently installed.) Preparing to replace login 1:4.0.18.1-6ubuntu1 (using .../login_1%3a4.0.18.1-9_sparc.deb) ... Unpacking replacement login ... Setting up login (4.0.18.1-9) ... Installing new version of config file /etc/login.defs ... (Reading database ... 9604 files and directories currently installed.) Preparing to replace mktemp 1.5-2 (using .../mktemp_1.5-3_sparc.deb) ... Unpacking replacement mktemp ... Setting up mktemp (1.5-3) ... (Reading database ... 9604 files and directories currently installed.) Preparing to replace mount 2.12r-17ubuntu2 (using .../mount_2.12r-19ubuntu1_sparc.deb) ... Unpacking replacement mount ... Setting up mount (2.12r-19ubuntu1) ... (Reading database ... 9604 files and directories currently installed.) Preparing to replace ncurses-bin 5.5-5ubuntu2 (using .../ncurses-bin_5.6-3ubuntu1_sparc.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.6-3ubuntu1) ... (Reading database ... 9605 files and directories currently installed.) Preparing to replace sed 4.1.5-1 (using .../archives/sed_4.1.5-2_sparc.deb) ... Unpacking replacement sed ... Setting up sed (4.1.5-2) ... (Reading database ... 9605 files and directories currently installed.) Preparing to replace sysvutils 2.86.ds1-14.1ubuntu18 (using .../sysvutils_2.86.ds1-14.1ubuntu20_sparc.deb) ... Unpacking replacement sysvutils ... Setting up sysvutils (2.86.ds1-14.1ubuntu20) ... (Reading database ... 9605 files and directories currently installed.) Preparing to replace tar 1.16-2 (using .../tar_1.16.1-1_sparc.deb) ... Unpacking replacement tar ... Setting up tar (1.16.1-1) ... (Reading database ... 9605 files and directories currently installed.) Preparing to replace lsb-base 3.1-22ubuntu3 (using .../lsb-base_3.1-23.1ubuntu1_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (3.1-23.1ubuntu1) ... (Reading database ... 9605 files and directories currently installed.) Preparing to replace tzdata 2007e-6ubuntu1 (using .../tzdata_2007f-3ubuntu1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2007f-3ubuntu1) ... Current default timezone: 'Africa/Abidjan' Local time is now: Fri Jun 22 11:29:42 GMT 2007. Universal Time is now: Fri Jun 22 11:29:42 UTC 2007. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... 9605 files and directories currently installed.) Preparing to replace util-linux 2.12r-17ubuntu2 (using .../util-linux_2.12r-19ubuntu1_sparc.deb) ... Unpacking replacement util-linux ... Setting up util-linux (2.12r-19ubuntu1) ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... 9605 files and directories currently installed.) Preparing to replace libncurses5 5.5-5ubuntu2 (using .../libncurses5_5.6-3ubuntu1_sparc.deb) ... Unpacking replacement libncurses5 ... Setting up libncurses5 (5.6-3ubuntu1) ... (Reading database ... 9605 files and directories currently installed.) Preparing to replace ncurses-base 5.5-5ubuntu2 (using .../ncurses-base_5.6-3ubuntu1_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.6-3ubuntu1) ... (Reading database ... 9605 files and directories currently installed.) Preparing to replace dash 0.5.3-5ubuntu2 (using .../dash_0.5.3-8ubuntu1_sparc.deb) ... Unpacking replacement dash ... Preparing to replace apt 0.6.46.4ubuntu10 (using .../apt_0.7.2ubuntu2_sparc.deb) ... Unpacking replacement apt ... Setting up apt (0.7.2ubuntu2) ... Installing new version of config file /etc/cron.daily/apt ... Selecting previously deselected package libdevmapper1.02.1. (Reading database ... 9607 files and directories currently installed.) Unpacking libdevmapper1.02.1 (from .../libdevmapper1.02.1_2%3a1.02.18-1ubuntu6_sparc.deb) ... Preparing to replace libblkid1 1.39+1.40-WIP-2006.11.14+dfsg-2ubuntu1 (using .../libblkid1_1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1_sparc.deb) ... Unpacking replacement libblkid1 ... Setting up libdevmapper1.02.1 (1.02.18-1ubuntu6) ... Setting up libblkid1 (1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1) ... (Reading database ... 9612 files and directories currently installed.) Preparing to replace libcomerr2 1.39+1.40-WIP-2006.11.14+dfsg-2ubuntu1 (using .../libcomerr2_1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1_sparc.deb) ... Unpacking replacement libcomerr2 ... Setting up libcomerr2 (1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1) ... (Reading database ... 9612 files and directories currently installed.) Preparing to replace libss2 1.39+1.40-WIP-2006.11.14+dfsg-2ubuntu1 (using .../libss2_1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1_sparc.deb) ... Unpacking replacement libss2 ... Setting up libss2 (1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1) ... (Reading database ... 9612 files and directories currently installed.) Preparing to replace libuuid1 1.39+1.40-WIP-2006.11.14+dfsg-2ubuntu1 (using .../libuuid1_1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1_sparc.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (1.39+1.40-WIP-2007.04.07+dfsg-2ubuntu1) ... (Reading database ... 9612 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3-13ubuntu4 (using .../zlib1g_1%3a1.2.3-15ubuntu1_sparc.deb) ... Unpacking replacement zlib1g ... Preparing to replace python2.5-minimal 2.5.1-1ubuntu2 (using .../python2.5-minimal_2.5.1-1ubuntu3_sparc.deb) ... Unpacking replacement python2.5-minimal ... Setting up zlib1g (1.2.3-15ubuntu1) ... Setting up python2.5-minimal (2.5.1-1ubuntu3) ... (Reading database ... 9612 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-14.1ubuntu18 (using .../sysv-rc_2.86.ds1-14.1ubuntu20_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.86.ds1-14.1ubuntu20) ... (Reading database ... 9612 files and directories currently installed.) Preparing to replace cpio 2.7-2 (using .../archives/cpio_2.8-1_sparc.deb) ... Unpacking replacement cpio ... Preparing to replace belocs-locales-bin 2.4-2ubuntu2 (using .../belocs-locales-bin_2.4-2.2ubuntu1_sparc.deb) ... Unpacking replacement belocs-locales-bin ... Preparing to replace passwd 1:4.0.18.1-6ubuntu1 (using .../passwd_1%3a4.0.18.1-9_sparc.deb) ... Unpacking replacement passwd ... Preparing to replace initscripts 2.86.ds1-14.1ubuntu18 (using .../initscripts_2.86.ds1-14.1ubuntu20_sparc.deb) ... Unpacking replacement initscripts ... Preparing to replace libdb4.3 4.3.29-6build1 (using .../libdb4.3_4.3.29-8_sparc.deb) ... Unpacking replacement libdb4.3 ... Preparing to replace libpam-foreground 0.3 (using .../libpam-foreground_0.3-0ubuntu1_sparc.deb) ... Unpacking replacement libpam-foreground ... Preparing to replace libslang2 2.0.6-4build1 (using .../libslang2_2.0.7-1_sparc.deb) ... Unpacking replacement libslang2 ... Preparing to replace binutils 2.17.20070426cvs-2ubuntu3 (using .../binutils_2.17.20070426cvs-7ubuntu2_sparc.deb) ... Unpacking replacement binutils ... Preparing to replace ccache 2.4-7build1 (using .../ccache_2.4-8_sparc.deb) ... Unpacking replacement ccache ... Preparing to replace g++-4.1 4.1.2-3ubuntu3 (using .../g++-4.1_4.1.2-12ubuntu1_sparc.deb) ... Unpacking replacement g++-4.1 ... Preparing to replace libstdc++6-4.1-dev 4.1.2-3ubuntu3 (using .../libstdc++6-4.1-dev_4.1.2-12ubuntu1_sparc.deb) ... Unpacking replacement libstdc++6-4.1-dev ... Preparing to replace gcc-4.1 4.1.2-3ubuntu3 (using .../gcc-4.1_4.1.2-12ubuntu1_sparc.deb) ... Unpacking replacement gcc-4.1 ... Preparing to replace cpp-4.1 4.1.2-3ubuntu3 (using .../cpp-4.1_4.1.2-12ubuntu1_sparc.deb) ... Unpacking replacement cpp-4.1 ... Preparing to replace gcc-4.1-base 4.1.2-3ubuntu3 (using .../gcc-4.1-base_4.1.2-12ubuntu1_sparc.deb) ... Unpacking replacement gcc-4.1-base ... Preparing to replace cpp 4:4.1.2-1ubuntu3 (using .../cpp_4%3a4.1.2-1ubuntu4_sparc.deb) ... Unpacking replacement cpp ... Preparing to replace dmsetup 2:1.02.08-1ubuntu10 (using .../dmsetup_2%3a1.02.18-1ubuntu6_sparc.deb) ... Unpacking replacement dmsetup ... Preparing to replace dpkg-dev 1.13.24ubuntu6 (using .../dpkg-dev_1.14.4+svn20070602r802-0ubuntu1_all.deb) ... Unpacking replacement dpkg-dev ... Preparing to replace fakeroot 1.5.10ubuntu2 (using .../fakeroot_1.7.1ubuntu1_sparc.deb) ... Unpacking replacement fakeroot ... Preparing to replace gcc 4:4.1.2-1ubuntu3 (using .../gcc_4%3a4.1.2-1ubuntu4_sparc.deb) ... Removing old gcc doc directory. Unpacking replacement gcc ... Preparing to replace g++ 4:4.1.2-1ubuntu3 (using .../g++_4%3a4.1.2-1ubuntu4_sparc.deb) ... Unpacking replacement g++ ... Setting up linux-libc-dev (2.6.22-6.13) ... Setting up libc6-sparc64 (2.5-11ubuntu1) ... Setting up libc6-dev (2.5-11ubuntu1) ... Setting up libc6-dev-sparc64 (2.5-11ubuntu1) ... Setting up lib64gcc1 (4.2-20070609-1ubuntu1) ... Setting up dash (0.5.3-8ubuntu1) ... Setting up cpio (2.8-1) ... Setting up belocs-locales-bin (2.4-2.2ubuntu1) ... Setting up passwd (4.0.18.1-9) ... Installing new version of config file /etc/default/useradd ... Setting up initscripts (2.86.ds1-14.1ubuntu20) ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Setting up libdb4.3 (4.3.29-8) ... Setting up libpam-foreground (0.3-0ubuntu1) ... Setting up libslang2 (2.0.7-1) ... Setting up binutils (2.17.20070426cvs-7ubuntu2) ... Setting up ccache (2.4-8) ... Setting up gcc-4.1-base (4.1.2-12ubuntu1) ... Setting up cpp-4.1 (4.1.2-12ubuntu1) ... Setting up gcc-4.1 (4.1.2-12ubuntu1) ... Setting up cpp (4.1.2-1ubuntu4) ... Setting up dmsetup (1.02.18-1ubuntu6) ... Setting up dpkg-dev (1.14.4+svn20070602r802-0ubuntu1) ... Setting up fakeroot (1.7.1ubuntu1) ... Setting up gcc (4.1.2-1ubuntu4) ... Setting up g++-4.1 (4.1.2-12ubuntu1) ... Setting up g++ (4.1.2-1ubuntu4) ... Setting up libstdc++6-4.1-dev (4.1.2-12ubuntu1) ... RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '351273-832183', '-dautobuild', '--nolog', '--batch', '--archive=ubuntu', '--comp=main', 'libieee1284_0.2.10-6.dsc'] Initiating build Automatic build of libieee1284_0.2.10-6 on artigas by sbuild/sparc 1.170.5 Build started at 20070622-1230 ****************************************************************************** libieee1284_0.2.10-6.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 5.0.37.2), dpatch, python-all-dev (>= 2.3.5-11), python-support (>= 0.4), autotools-dev, chrpath Checking for already installed source dependencies... debhelper: missing dpatch: missing python-all-dev: missing python-support: missing autotools-dev: missing chrpath: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper dpatch python-all-dev python-support autotools-dev chrpath Reading package lists... Building dependency tree... The following extra packages will be installed: file gettext gettext-base html2text intltool-debian libbz2-1.0 libmagic1 libncursesw5 libreadline5 libsqlite3-0 libssl0.9.8 mime-support po-debconf python python-all python-dev python2.4 python2.4-dev python2.4-minimal python2.5 python2.5-dev readline-common Suggested packages: dh-make curl cvs gettext-doc python-doc python-tk python-profiler python2.4-doc python2.5-doc Recommended packages: patchutils libgpmg1 libmail-sendmail-perl libcompress-zlib-perl The following NEW packages will be installed: autotools-dev chrpath debhelper dpatch file gettext gettext-base html2text intltool-debian libbz2-1.0 libmagic1 libncursesw5 libreadline5 libsqlite3-0 libssl0.9.8 mime-support po-debconf python python-all python-all-dev python-dev python-support python2.4 python2.4-dev python2.4-minimal python2.5 python2.5-dev readline-common 0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/16.3MB of archives. After unpacking 55.7MB of additional disk space will be used. Selecting previously deselected package gettext-base. (Reading database ... 9618 files and directories currently installed.) Unpacking gettext-base (from .../gettext-base_0.16.1-1ubuntu2_sparc.deb) ... Selecting previously deselected package libbz2-1.0. Unpacking libbz2-1.0 (from .../libbz2-1.0_1.0.3-7_sparc.deb) ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.6-3ubuntu1_sparc.deb) ... Selecting previously deselected package readline-common. Unpacking readline-common (from .../readline-common_5.2-3_all.deb) ... Selecting previously deselected package libreadline5. Unpacking libreadline5 (from .../libreadline5_5.2-3_sparc.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.3.17-1_sparc.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8e-5_sparc.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.39-1_all.deb) ... Selecting previously deselected package python2.5. Unpacking python2.5 (from .../python2.5_2.5.1-1ubuntu3_sparc.deb) ... Selecting previously deselected package python. Unpacking python (from .../python_2.5.1-1ubuntu2_all.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_4.21-1_sparc.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.21-1_sparc.deb) ... Selecting previously deselected package python-support. Unpacking python-support (from .../python-support_0.6.4ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20070306.1_all.deb) ... Selecting previously deselected package chrpath. Unpacking chrpath (from .../chrpath_0.13-2_sparc.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-3_sparc.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.16.1-1ubuntu2_sparc.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.9_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_5.0.50ubuntu1_all.deb) ... Selecting previously deselected package dpatch. Unpacking dpatch (from .../archives/dpatch_2.0.25_all.deb) ... Selecting previously deselected package python2.4-minimal. Unpacking python2.4-minimal (from .../python2.4-minimal_2.4.4-4ubuntu1_sparc.deb) ... Selecting previously deselected package python2.4. Unpacking python2.4 (from .../python2.4_2.4.4-4ubuntu1_sparc.deb) ... Selecting previously deselected package python-all. Unpacking python-all (from .../python-all_2.5.1-1ubuntu2_all.deb) ... Selecting previously deselected package python2.5-dev. Unpacking python2.5-dev (from .../python2.5-dev_2.5.1-1ubuntu3_sparc.deb) ... Selecting previously deselected package python-dev. Unpacking python-dev (from .../python-dev_2.5.1-1ubuntu2_all.deb) ... Selecting previously deselected package python2.4-dev. Unpacking python2.4-dev (from .../python2.4-dev_2.4.4-4ubuntu1_sparc.deb) ... Selecting previously deselected package python-all-dev. Unpacking python-all-dev (from .../python-all-dev_2.5.1-1ubuntu2_all.deb) ... Setting up gettext-base (0.16.1-1ubuntu2) ... Setting up libbz2-1.0 (1.0.3-7) ... Setting up libncursesw5 (5.6-3ubuntu1) ... Setting up readline-common (5.2-3) ... Setting up libreadline5 (5.2-3) ... Setting up libsqlite3-0 (3.3.17-1) ... Setting up libssl0.9.8 (0.9.8e-5) ... Setting up mime-support (3.39-1) ... Setting up python2.5 (2.5.1-1ubuntu3) ... Setting up python (2.5.1-1ubuntu2) ... Setting up libmagic1 (4.21-1) ... Setting up file (4.21-1) ... Setting up python-support (0.6.4ubuntu1) ... Setting up autotools-dev (20070306.1) ... Setting up chrpath (0.13-2) ... Setting up html2text (1.3.2a-3) ... Setting up gettext (0.16.1-1ubuntu2) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.9) ... Setting up debhelper (5.0.50ubuntu1) ... Setting up dpatch (2.0.25) ... Setting up python2.4-minimal (2.4.4-4ubuntu1) ... Setting up python2.4 (2.4.4-4ubuntu1) ... Setting up python-all (2.5.1-1ubuntu2) ... Setting up python2.5-dev (2.5.1-1ubuntu3) ... Setting up python-dev (2.5.1-1ubuntu2) ... Setting up python2.4-dev (2.4.4-4ubuntu1) ... Setting up python-all-dev (2.5.1-1ubuntu2) ... Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.5-11ubuntu1 make_3.81-3build1 dpkg-dev_1.14.4+svn20070602r802-0ubuntu1 linux-kernel-headers_=*=PROVIDED=*= gcc-4.1_4.1.2-12ubuntu1 g++-4.1_4.1.2-12ubuntu1 binutils_2.17.20070426cvs-7ubuntu2 libstdc++6-4.1-dev_4.1.2-12ubuntu1 libstdc++6_4.2-20070609-1ubuntu1 ------------------------------------------------------------------------------ dpkg-source: extracting libieee1284 in libieee1284-0.2.10 dpkg-source: unpacking libieee1284_0.2.10.orig.tar.gz dpkg-source: applying /home/buildd/build-351273-832183/libieee1284_0.2.10-6.diff.gz dpkg-buildpackage: source package is libieee1284 dpkg-buildpackage: source version is 0.2.10-6 dpkg-buildpackage: host architecture sparc dpkg-buildpackage: source version without epoch 0.2.10-6 /usr/bin/fakeroot debian/rules clean pyversions: missing XS-Python-Version in control file, fall back to debian/pyversions dh_testdir dh_testroot rm -f build-stamp autotools-stamp configure-stamp # Add here commands to clean up after the build process. /usr/bin/make distclean make[1]: Entering directory `/build/buildd/libieee1284-0.2.10' make[1]: *** No rule to make target `distclean'. Stop. make[1]: Leaving directory `/build/buildd/libieee1284-0.2.10' make: [real-clean] Error 2 (ignored) rm -f debian/libieee1284-3.docs rm -f config.sub config.guess dh_clean dpatch deapply-all 10_kfreebsd-amd64 not applied to ./ . rm -rf patch-stamp patch-stampT debian/patched debian/rules build pyversions: missing XS-Python-Version in control file, fall back to debian/pyversions test -d debian/patched || install -d debian/patched dpatch apply-all applying patch 10_kfreebsd-amd64 to ./ ... ok. dpatch cat-all >>patch-stampT mv -f patch-stampT patch-stamp rm -f config.sub config.guess ln -s /usr/share/misc/config.sub config.sub ln -s /usr/share/misc/config.guess config.guess touch autotools-stamp dh_testdir # Add here commands to configure the package. ./configure --without-python --prefix=/usr \ --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking whether gcc and cc understand -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking build system type... sparc-unknown-linux-gnu checking host system type... sparc-unknown-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 65536 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... cat: /etc/ld.so.conf.d/*.conf: No such file or directory GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... cat: /etc/ld.so.conf.d/*.conf: No such file or directory GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking sys/io.h usability... no checking sys/io.h presence... no checking for sys/io.h... no checking whether to build python bindings... (cached) no configure: creating ./config.status config.status: creating Makefile config.status: creating libieee1284.spec config.status: creating include/config.h config.status: executing depfiles commands touch configure-stamp dh_testdir # Add here commands to compile the package. /usr/bin/make make[1]: Entering directory `/build/buildd/libieee1284-0.2.10' cd . && /bin/bash /build/buildd/libieee1284-0.2.10/missing --run aclocal-1.9 /build/buildd/libieee1284-0.2.10/missing: line 52: aclocal-1.9: command not found WARNING: `aclocal-1.9' is missing on your system. You should only need it if you modified `acinclude.m4' or `configure.in'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. cd . && /bin/bash /build/buildd/libieee1284-0.2.10/missing --run automake-1.9 --gnu /build/buildd/libieee1284-0.2.10/missing: line 52: automake-1.9: command not found WARNING: `automake-1.9' is missing on your system. You should only need it if you modified `Makefile.am', `acinclude.m4' or `configure.in'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. cd . && /bin/bash /build/buildd/libieee1284-0.2.10/missing --run autoconf /build/buildd/libieee1284-0.2.10/missing: line 52: autoconf: command not found WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. /bin/bash ./config.status --recheck running CONFIG_SHELL=/bin/bash /bin/bash ./configure --without-python --prefix=/usr --mandir=${prefix}/share/man --infodir=${prefix}/share/info --no-create --no-recursion checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking whether gcc and cc understand -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking build system type... sparc-unknown-linux-gnu checking host system type... sparc-unknown-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 65536 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... cat: /etc/ld.so.conf.d/*.conf: No such file or directory GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... cat: /etc/ld.so.conf.d/*.conf: No such file or directory GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking sys/io.h usability... no checking sys/io.h presence... no checking for sys/io.h... no checking whether to build python bindings... (cached) no configure: creating ./config.status /bin/bash ./config.status config.status: creating Makefile config.status: creating libieee1284.spec config.status: creating include/config.h config.status: include/config.h is unchanged config.status: executing depfiles commands make[1]: Leaving directory `/build/buildd/libieee1284-0.2.10' make[1]: Entering directory `/build/buildd/libieee1284-0.2.10' depbase=`echo src/detect.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/detect.lo -MD -MP -MF "$depbase.Tpo" -c -o src/detect.lo src/detect.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi mkdir src/.libs gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/detect.lo -MD -MP -MF src/.deps/detect.Tpo -c src/detect.c -fPIC -DPIC -o src/.libs/detect.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/detect.lo -MD -MP -MF src/.deps/detect.Tpo -c src/detect.c -o src/detect.o >/dev/null 2>&1 depbase=`echo src/ports.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/ports.lo -MD -MP -MF "$depbase.Tpo" -c -o src/ports.lo src/ports.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/ports.lo -MD -MP -MF src/.deps/ports.Tpo -c src/ports.c -fPIC -DPIC -o src/.libs/ports.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/ports.lo -MD -MP -MF src/.deps/ports.Tpo -c src/ports.c -o src/ports.o >/dev/null 2>&1 depbase=`echo src/deviceid.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/deviceid.lo -MD -MP -MF "$depbase.Tpo" -c -o src/deviceid.lo src/deviceid.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/deviceid.lo -MD -MP -MF src/.deps/deviceid.Tpo -c src/deviceid.c -fPIC -DPIC -o src/.libs/deviceid.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/deviceid.lo -MD -MP -MF src/.deps/deviceid.Tpo -c src/deviceid.c -o src/deviceid.o >/dev/null 2>&1 depbase=`echo src/state.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/state.lo -MD -MP -MF "$depbase.Tpo" -c -o src/state.lo src/state.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/state.lo -MD -MP -MF src/.deps/state.Tpo -c src/state.c -fPIC -DPIC -o src/.libs/state.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/state.lo -MD -MP -MF src/.deps/state.Tpo -c src/state.c -o src/state.o >/dev/null 2>&1 depbase=`echo src/delay.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/delay.lo -MD -MP -MF "$depbase.Tpo" -c -o src/delay.lo src/delay.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/delay.lo -MD -MP -MF src/.deps/delay.Tpo -c src/delay.c -fPIC -DPIC -o src/.libs/delay.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/delay.lo -MD -MP -MF src/.deps/delay.Tpo -c src/delay.c -o src/delay.o >/dev/null 2>&1 depbase=`echo src/default.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/default.lo -MD -MP -MF "$depbase.Tpo" -c -o src/default.lo src/default.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/default.lo -MD -MP -MF src/.deps/default.Tpo -c src/default.c -fPIC -DPIC -o src/.libs/default.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/default.lo -MD -MP -MF src/.deps/default.Tpo -c src/default.c -o src/default.o >/dev/null 2>&1 depbase=`echo src/access_io.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/access_io.lo -MD -MP -MF "$depbase.Tpo" -c -o src/access_io.lo src/access_io.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/access_io.lo -MD -MP -MF src/.deps/access_io.Tpo -c src/access_io.c -fPIC -DPIC -o src/.libs/access_io.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/access_io.lo -MD -MP -MF src/.deps/access_io.Tpo -c src/access_io.c -o src/access_io.o >/dev/null 2>&1 depbase=`echo src/access_ppdev.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/access_ppdev.lo -MD -MP -MF "$depbase.Tpo" -c -o src/access_ppdev.lo src/access_ppdev.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/access_ppdev.lo -MD -MP -MF src/.deps/access_ppdev.Tpo -c src/access_ppdev.c -fPIC -DPIC -o src/.libs/access_ppdev.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/access_ppdev.lo -MD -MP -MF src/.deps/access_ppdev.Tpo -c src/access_ppdev.c -o src/access_ppdev.o >/dev/null 2>&1 depbase=`echo src/access_lpt.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/access_lpt.lo -MD -MP -MF "$depbase.Tpo" -c -o src/access_lpt.lo src/access_lpt.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/access_lpt.lo -MD -MP -MF src/.deps/access_lpt.Tpo -c src/access_lpt.c -fPIC -DPIC -o src/.libs/access_lpt.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/access_lpt.lo -MD -MP -MF src/.deps/access_lpt.Tpo -c src/access_lpt.c -o src/access_lpt.o >/dev/null 2>&1 depbase=`echo src/interface.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/interface.lo -MD -MP -MF "$depbase.Tpo" -c -o src/interface.lo src/interface.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/interface.lo -MD -MP -MF src/.deps/interface.Tpo -c src/interface.c -fPIC -DPIC -o src/.libs/interface.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/interface.lo -MD -MP -MF src/.deps/interface.Tpo -c src/interface.c -o src/interface.o >/dev/null 2>&1 depbase=`echo src/debug.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/debug.lo -MD -MP -MF "$depbase.Tpo" -c -o src/debug.lo src/debug.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/debug.lo -MD -MP -MF src/.deps/debug.Tpo -c src/debug.c -fPIC -DPIC -o src/.libs/debug.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/debug.lo -MD -MP -MF src/.deps/debug.Tpo -c src/debug.c -o src/debug.o >/dev/null 2>&1 depbase=`echo src/conf.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \ if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/conf.lo -MD -MP -MF "$depbase.Tpo" -c -o src/conf.lo src/conf.c; \ then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/conf.lo -MD -MP -MF src/.deps/conf.Tpo -c src/conf.c -fPIC -DPIC -o src/.libs/conf.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT src/conf.lo -MD -MP -MF src/.deps/conf.Tpo -c src/conf.c -o src/conf.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -o libieee1284.la -rpath /usr/lib -version-info 5:2:2 -export-symbols ./libieee1284.sym src/detect.lo src/ports.lo src/deviceid.lo src/state.lo src/delay.lo src/default.lo src/access_io.lo src/access_ppdev.lo src/access_lpt.lo src/interface.lo src/debug.lo src/conf.lo mkdir .libs echo "{ global:" > .libs/libieee1284.ver cat ./libieee1284.sym | sed -e "s/\(.*\)/\1;/" >> .libs/libieee1284.ver echo "local: *; };" >> .libs/libieee1284.ver gcc -shared src/.libs/detect.o src/.libs/ports.o src/.libs/deviceid.o src/.libs/state.o src/.libs/delay.o src/.libs/default.o src/.libs/access_io.o src/.libs/access_ppdev.o src/.libs/access_lpt.o src/.libs/interface.o src/.libs/debug.o src/.libs/conf.o -Wl,-soname -Wl,libieee1284.so.3 -Wl,-version-script -Wl,.libs/libieee1284.ver -o .libs/libieee1284.so.3.2.2 (cd .libs && rm -f libieee1284.so.3 && ln -s libieee1284.so.3.2.2 libieee1284.so.3) (cd .libs && rm -f libieee1284.so && ln -s libieee1284.so.3.2.2 libieee1284.so) ar cru .libs/libieee1284.a src/detect.o src/ports.o src/deviceid.o src/state.o src/delay.o src/default.o src/access_io.o src/access_ppdev.o src/access_lpt.o src/interface.o src/debug.o src/conf.o ranlib .libs/libieee1284.a creating libieee1284.la (cd .libs && rm -f libieee1284.la && ln -s ../libieee1284.la libieee1284.la) depbase=`echo tests/test.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \ if gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -g -O2 -MT tests/test.o -MD -MP -MF "$depbase.Tpo" -c -o tests/test.o tests/test.c; \ then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -o libieee1284_test tests/test.o libieee1284.la gcc -g -O2 -o .libs/libieee1284_test tests/test.o ./.libs/libieee1284.so creating libieee1284_test make[1]: Leaving directory `/build/buildd/libieee1284-0.2.10' touch build-stamp /usr/bin/fakeroot debian/rules binary-arch pyversions: missing XS-Python-Version in control file, fall back to debian/pyversions dh_testdir dh_testroot dh_clean -k dh_installdirs # Add here commands to install the package into debian/tmp /usr/bin/make install prefix=/build/buildd/libieee1284-0.2.10/debian/tmp/usr make[1]: Entering directory `/build/buildd/libieee1284-0.2.10' cd . && /bin/bash /build/buildd/libieee1284-0.2.10/missing --run autoheader /build/buildd/libieee1284-0.2.10/missing: line 52: autoheader: command not found WARNING: `autoheader' is missing on your system. You should only need it if you modified `acconfig.h' or `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. rm -f include/stamp-h1 touch include/config.h.in cd . && /bin/bash ./config.status include/config.h config.status: creating include/config.h config.status: include/config.h is unchanged make[2]: Entering directory `/build/buildd/libieee1284-0.2.10' test -z "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib" || mkdir -p -- "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib" /bin/bash ./libtool --mode=install /usr/bin/install -c 'libieee1284.la' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/libieee1284.la' /usr/bin/install -c .libs/libieee1284.so.3.2.2 /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/libieee1284.so.3.2.2 (cd /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib && rm -f libieee1284.so.3 && ln -s libieee1284.so.3.2.2 libieee1284.so.3) (cd /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib && rm -f libieee1284.so && ln -s libieee1284.so.3.2.2 libieee1284.so) /usr/bin/install -c .libs/libieee1284.lai /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/libieee1284.la /usr/bin/install -c .libs/libieee1284.a /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/libieee1284.a chmod 644 /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/libieee1284.a ranlib /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/libieee1284.a libtool: install: warning: remember to run `libtool --finish /usr/lib' test -z "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/bin" || mkdir -p -- "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/bin" /bin/bash ./libtool --mode=install /usr/bin/install -c 'libieee1284_test' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/bin/libieee1284_test' libtool: install: warning: `libieee1284.la' has not been installed in `/usr/lib' /usr/bin/install -c .libs/libieee1284_test /build/buildd/libieee1284-0.2.10/debian/tmp/usr/bin/libieee1284_test test -z "" || mkdir -p -- "" test -z "" || mkdir -p -- "" test -z "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/include" || mkdir -p -- "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/include" /usr/bin/install -c -m 644 'include/ieee1284.h' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/include/ieee1284.h' test -z "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3" || mkdir -p -- "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3" /usr/bin/install -c -m 644 './doc/libieee1284.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/libieee1284.3' /usr/bin/install -c -m 644 './doc/parport.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/parport.3' /usr/bin/install -c -m 644 './doc/parport_list.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/parport_list.3' /usr/bin/install -c -m 644 './doc/ieee1284_find_ports.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_find_ports.3' /usr/bin/install -c -m 644 './doc/ieee1284_free_ports.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_free_ports.3' /usr/bin/install -c -m 644 './doc/ieee1284_get_deviceid.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_get_deviceid.3' /usr/bin/install -c -m 644 './doc/ieee1284_open.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_open.3' /usr/bin/install -c -m 644 './doc/ieee1284_close.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_close.3' /usr/bin/install -c -m 644 './doc/ieee1284_ref.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_ref.3' /usr/bin/install -c -m 644 './doc/ieee1284_unref.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_unref.3' /usr/bin/install -c -m 644 './doc/ieee1284_claim.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_claim.3' /usr/bin/install -c -m 644 './doc/ieee1284_release.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_release.3' /usr/bin/install -c -m 644 './doc/ieee1284_read_data.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_read_data.3' /usr/bin/install -c -m 644 './doc/ieee1284_write_data.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_write_data.3' /usr/bin/install -c -m 644 './doc/ieee1284_data_dir.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_data_dir.3' /usr/bin/install -c -m 644 './doc/ieee1284_wait_data.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_wait_data.3' /usr/bin/install -c -m 644 './doc/ieee1284_read_status.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_read_status.3' /usr/bin/install -c -m 644 './doc/ieee1284_wait_status.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_wait_status.3' /usr/bin/install -c -m 644 './doc/ieee1284_read_control.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_read_control.3' /usr/bin/install -c -m 644 './doc/ieee1284_write_control.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_write_control.3' /usr/bin/install -c -m 644 './doc/ieee1284_frob_control.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_frob_control.3' /usr/bin/install -c -m 644 './doc/ieee1284_do_nack_handshake.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_do_nack_handshake.3' /usr/bin/install -c -m 644 './doc/ieee1284_negotiate.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_negotiate.3' /usr/bin/install -c -m 644 './doc/ieee1284_terminate.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_terminate.3' /usr/bin/install -c -m 644 './doc/ieee1284_ecp_fwd_to_rev.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_ecp_fwd_to_rev.3' /usr/bin/install -c -m 644 './doc/ieee1284_ecp_rev_to_fwd.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_ecp_rev_to_fwd.3' /usr/bin/install -c -m 644 './doc/ieee1284_nibble_read.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_nibble_read.3' /usr/bin/install -c -m 644 './doc/ieee1284_compat_write.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_compat_write.3' /usr/bin/install -c -m 644 './doc/ieee1284_byte_read.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_byte_read.3' /usr/bin/install -c -m 644 './doc/ieee1284_epp_read_data.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_epp_read_data.3' /usr/bin/install -c -m 644 './doc/ieee1284_epp_write_data.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_epp_write_data.3' /usr/bin/install -c -m 644 './doc/ieee1284_epp_read_addr.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_epp_read_addr.3' /usr/bin/install -c -m 644 './doc/ieee1284_epp_write_addr.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_epp_write_addr.3' /usr/bin/install -c -m 644 './doc/ieee1284_ecp_read_data.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_ecp_read_data.3' /usr/bin/install -c -m 644 './doc/ieee1284_ecp_write_data.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_ecp_write_data.3' /usr/bin/install -c -m 644 './doc/ieee1284_ecp_read_addr.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_ecp_read_addr.3' /usr/bin/install -c -m 644 './doc/ieee1284_ecp_write_addr.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_ecp_write_addr.3' /usr/bin/install -c -m 644 './doc/ieee1284_get_irq_fd.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_get_irq_fd.3' /usr/bin/install -c -m 644 './doc/ieee1284_set_timeout.3' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/share/man/man3/ieee1284_set_timeout.3' test -z "" || mkdir -p -- "" make[2]: Leaving directory `/build/buildd/libieee1284-0.2.10' make[1]: Leaving directory `/build/buildd/libieee1284-0.2.10' PYTHON=/usr/bin/python2.4 ./configure --with-python --prefix=/usr \ --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking whether gcc and cc understand -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking build system type... sparc-unknown-linux-gnu checking host system type... sparc-unknown-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 65536 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... cat: /etc/ld.so.conf.d/*.conf: No such file or directory GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... cat: /etc/ld.so.conf.d/*.conf: No such file or directory GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking sys/io.h usability... no checking sys/io.h presence... no checking for sys/io.h... no checking whether to build python bindings... (cached) yes checking for python version... 2.4 checking for python platform... linux2 checking for python script directory... ${prefix}/lib/python2.4/site-packages checking for python extension module directory... ${exec_prefix}/lib/python2.4/site-packages configure: creating ./config.status config.status: creating Makefile config.status: creating libieee1284.spec config.status: creating include/config.h config.status: include/config.h is unchanged config.status: executing depfiles commands /usr/bin/make clean-pyexecLTLIBRARIES make[1]: Entering directory `/build/buildd/libieee1284-0.2.10' test -z "src/ieee1284module.la" || rm -f src/ieee1284module.la rm -f "src/so_locations" make[1]: Leaving directory `/build/buildd/libieee1284-0.2.10' /usr/bin/make src/ieee1284module.la make[1]: Entering directory `/build/buildd/libieee1284-0.2.10' if /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -I/usr/include/python2.4 -fpic -g -O2 -MT src/src_ieee1284module_la-ieee1284module.lo -MD -MP -MF "src/.deps/src_ieee1284module_la-ieee1284module.Tpo" -c -o src/src_ieee1284module_la-ieee1284module.lo `test -f 'src/ieee1284module.c' || echo './'`src/ieee1284module.c; \ then mv -f "src/.deps/src_ieee1284module_la-ieee1284module.Tpo" "src/.deps/src_ieee1284module_la-ieee1284module.Plo"; else rm -f "src/.deps/src_ieee1284module_la-ieee1284module.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -I/usr/include/python2.4 -fpic -g -O2 -MT src/src_ieee1284module_la-ieee1284module.lo -MD -MP -MF src/.deps/src_ieee1284module_la-ieee1284module.Tpo -c src/ieee1284module.c -fPIC -DPIC -o src/.libs/src_ieee1284module_la-ieee1284module.o gcc -DHAVE_CONFIG_H -I. -I. -I./include -I./include -I/usr/include/python2.4 -fpic -g -O2 -MT src/src_ieee1284module_la-ieee1284module.lo -MD -MP -MF src/.deps/src_ieee1284module_la-ieee1284module.Tpo -c src/ieee1284module.c -o src/src_ieee1284module_la-ieee1284module.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -o src/ieee1284module.la -rpath /usr/lib/python2.4/site-packages -module -avoid-version src/src_ieee1284module_la-ieee1284module.lo libieee1284.la gcc -shared src/.libs/src_ieee1284module_la-ieee1284module.o -Wl,--rpath -Wl,/build/buildd/libieee1284-0.2.10/.libs ./.libs/libieee1284.so -Wl,-soname -Wl,ieee1284module.so -o src/.libs/ieee1284module.so ar cru src/.libs/ieee1284module.a src/src_ieee1284module_la-ieee1284module.o ranlib src/.libs/ieee1284module.a creating src/ieee1284module.la (cd src/.libs && rm -f ieee1284module.la && ln -s ../ieee1284module.la ieee1284module.la) make[1]: Leaving directory `/build/buildd/libieee1284-0.2.10' /usr/bin/make install-pyexecLTLIBRARIES prefix=/build/buildd/libieee1284-0.2.10/debian/tmp/usr make[1]: Entering directory `/build/buildd/libieee1284-0.2.10' test -z "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.4/site-packages" || mkdir -p -- "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.4/site-packages" /bin/bash ./libtool --mode=install /usr/bin/install -c 'src/ieee1284module.la' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.4/site-packages/ieee1284module.la' libtool: install: warning: relinking `src/ieee1284module.la' (cd /build/buildd/libieee1284-0.2.10; /bin/bash ./libtool --tag=CC --mode=relink gcc -g -O2 -o src/ieee1284module.la -rpath /usr/lib/python2.4/site-packages -module -avoid-version src/src_ieee1284module_la-ieee1284module.lo libieee1284.la -inst-prefix-dir /build/buildd/libieee1284-0.2.10/debian/tmp) gcc -shared src/.libs/src_ieee1284module_la-ieee1284module.o -L/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib -L/usr/lib -lieee1284 -Wl,-soname -Wl,ieee1284module.so -o src/.libs/ieee1284module.so /usr/bin/install -c src/.libs/ieee1284module.soT /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.4/site-packages/ieee1284module.so /usr/bin/install -c src/.libs/ieee1284module.lai /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.4/site-packages/ieee1284module.la /usr/bin/install -c src/.libs/ieee1284module.a /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.4/site-packages/ieee1284module.a chmod 644 /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.4/site-packages/ieee1284module.a ranlib /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.4/site-packages/ieee1284module.a libtool: install: warning: remember to run `libtool --finish /usr/lib/python2.4/site-packages' make[1]: Leaving directory `/build/buildd/libieee1284-0.2.10' # remove rpath from the python module chrpath -d /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.4/site-packages/ieee1284module.so PYTHON=/usr/bin/python2.5 ./configure --with-python --prefix=/usr \ --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking whether gcc and cc understand -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking build system type... sparc-unknown-linux-gnu checking host system type... sparc-unknown-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 65536 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... cat: /etc/ld.so.conf.d/*.conf: No such file or directory GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... cat: /etc/ld.so.conf.d/*.conf: No such file or directory GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking sys/io.h usability... no checking sys/io.h presence... no checking for sys/io.h... no checking whether to build python bindings... (cached) yes checking for python version... 2.5 checking for python platform... linux2 checking for python script directory... ${prefix}/lib/python2.5/site-packages checking for python extension module directory... ${exec_prefix}/lib/python2.5/site-packages configure: creating ./config.status config.status: creating Makefile config.status: creating libieee1284.spec config.status: creating include/config.h config.status: include/config.h is unchanged config.status: executing depfiles commands /usr/bin/make clean-pyexecLTLIBRARIES make[1]: Entering directory `/build/buildd/libieee1284-0.2.10' test -z "src/ieee1284module.la" || rm -f src/ieee1284module.la rm -f "src/so_locations" make[1]: Leaving directory `/build/buildd/libieee1284-0.2.10' /usr/bin/make src/ieee1284module.la make[1]: Entering directory `/build/buildd/libieee1284-0.2.10' /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -o src/ieee1284module.la -rpath /usr/lib/python2.5/site-packages -module -avoid-version src/src_ieee1284module_la-ieee1284module.lo libieee1284.la rm -fr src/.libs/ieee1284module.a src/.libs/ieee1284module.la src/.libs/ieee1284module.lai src/.libs/ieee1284module.so src/.libs/ieee1284module.soT gcc -shared src/.libs/src_ieee1284module_la-ieee1284module.o -Wl,--rpath -Wl,/build/buildd/libieee1284-0.2.10/.libs ./.libs/libieee1284.so -Wl,-soname -Wl,ieee1284module.so -o src/.libs/ieee1284module.so ar cru src/.libs/ieee1284module.a src/src_ieee1284module_la-ieee1284module.o ranlib src/.libs/ieee1284module.a creating src/ieee1284module.la (cd src/.libs && rm -f ieee1284module.la && ln -s ../ieee1284module.la ieee1284module.la) make[1]: Leaving directory `/build/buildd/libieee1284-0.2.10' /usr/bin/make install-pyexecLTLIBRARIES prefix=/build/buildd/libieee1284-0.2.10/debian/tmp/usr make[1]: Entering directory `/build/buildd/libieee1284-0.2.10' test -z "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.5/site-packages" || mkdir -p -- "/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.5/site-packages" /bin/bash ./libtool --mode=install /usr/bin/install -c 'src/ieee1284module.la' '/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.5/site-packages/ieee1284module.la' libtool: install: warning: relinking `src/ieee1284module.la' (cd /build/buildd/libieee1284-0.2.10; /bin/bash ./libtool --tag=CC --mode=relink gcc -g -O2 -o src/ieee1284module.la -rpath /usr/lib/python2.5/site-packages -module -avoid-version src/src_ieee1284module_la-ieee1284module.lo libieee1284.la -inst-prefix-dir /build/buildd/libieee1284-0.2.10/debian/tmp) gcc -shared src/.libs/src_ieee1284module_la-ieee1284module.o -L/build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib -L/usr/lib -lieee1284 -Wl,-soname -Wl,ieee1284module.so -o src/.libs/ieee1284module.so /usr/bin/install -c src/.libs/ieee1284module.soT /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.5/site-packages/ieee1284module.so /usr/bin/install -c src/.libs/ieee1284module.lai /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.5/site-packages/ieee1284module.la /usr/bin/install -c src/.libs/ieee1284module.a /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.5/site-packages/ieee1284module.a chmod 644 /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.5/site-packages/ieee1284module.a ranlib /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.5/site-packages/ieee1284module.a libtool: install: warning: remember to run `libtool --finish /usr/lib/python2.5/site-packages' make[1]: Leaving directory `/build/buildd/libieee1284-0.2.10' # remove rpath from the python module chrpath -d /build/buildd/libieee1284-0.2.10/debian/tmp/usr/lib/python2.5/site-packages/ieee1284module.so dh_testdir dh_testroot dh_install --sourcedir=debian/tmp cp debian/libieee1284-3.docs.in debian/libieee1284-3.docs dh_installdocs dh_installman dh_installinfo dh_installchangelogs ChangeLog dh_link dh_strip dh_strip debug symbol extraction: all non-arch-all packages for this build platform sparc: libieee1284-3-dev libieee1284-3 python-ieee1284 dh_strip debug symbol extraction: packages to act on: libieee1284-3-dev libieee1284-3 python-ieee1284 dh_strip debug symbol extraction: ignored packages: pkgstriptranslations: processing control file: ./debian/libieee1284-3-dbgsym/DEBIAN/control, package libieee1284-3-dbgsym, directory ./debian/libieee1284-3-dbgsym pkgstriptranslations: libieee1284-3-dbgsym does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Core Developers " warning, `/build/buildd/libieee1284-0.2.10/debian/libieee1284-3-dbgsym/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `libieee1284-3-dbgsym' in `../libieee1284-3-dbgsym_0.2.10-6_sparc.ddeb'. pkgstriptranslations: processing control file: ./debian/python-ieee1284-dbgsym/DEBIAN/control, package python-ieee1284-dbgsym, directory ./debian/python-ieee1284-dbgsym pkgstriptranslations: python-ieee1284-dbgsym does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Core Developers " warning, `/build/buildd/libieee1284-0.2.10/debian/python-ieee1284-dbgsym/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `python-ieee1284-dbgsym' in `../python-ieee1284-dbgsym_0.2.10-6_sparc.ddeb'. dh_compress dh_fixperms dh_makeshlibs dh_pysupport dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb pkgstriptranslations: processing control file: ./debian/libieee1284-3-dev/DEBIAN/control, package libieee1284-3-dev, directory ./debian/libieee1284-3-dev pkgstriptranslations: libieee1284-3-dev does not contain translations, skipping pkgstriptranslations: processing control file: ./debian/libieee1284-3/DEBIAN/control, package libieee1284-3, directory ./debian/libieee1284-3 pkgstriptranslations: libieee1284-3 does not contain translations, skipping pkgstriptranslations: processing control file: ./debian/python-ieee1284/DEBIAN/control, package python-ieee1284, directory ./debian/python-ieee1284 pkgstriptranslations: python-ieee1284 does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Core Developers " warning, `debian/libieee1284-3-dev/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `libieee1284-3-dev' in `../libieee1284-3-dev_0.2.10-6_sparc.deb'. pkgstriptranslations: processing control file: ./debian/libieee1284-3-dev/DEBIAN/control, package libieee1284-3-dev, directory ./debian/libieee1284-3-dev pkgstriptranslations: libieee1284-3-dev does not contain translations, skipping pkgstriptranslations: processing control file: ./debian/libieee1284-3/DEBIAN/control, package libieee1284-3, directory ./debian/libieee1284-3 pkgstriptranslations: libieee1284-3 does not contain translations, skipping pkgstriptranslations: processing control file: ./debian/python-ieee1284/DEBIAN/control, package python-ieee1284, directory ./debian/python-ieee1284 pkgstriptranslations: python-ieee1284 does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Core Developers " warning, `debian/libieee1284-3/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `libieee1284-3' in `../libieee1284-3_0.2.10-6_sparc.deb'. pkgstriptranslations: processing control file: ./debian/libieee1284-3-dev/DEBIAN/control, package libieee1284-3-dev, directory ./debian/libieee1284-3-dev pkgstriptranslations: libieee1284-3-dev does not contain translations, skipping pkgstriptranslations: processing control file: ./debian/libieee1284-3/DEBIAN/control, package libieee1284-3, directory ./debian/libieee1284-3 pkgstriptranslations: libieee1284-3 does not contain translations, skipping pkgstriptranslations: processing control file: ./debian/python-ieee1284/DEBIAN/control, package python-ieee1284, directory ./debian/python-ieee1284 pkgstriptranslations: python-ieee1284 does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Core Developers " warning, `debian/python-ieee1284/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `python-ieee1284' in `../python-ieee1284_0.2.10-6_sparc.deb'. dpkg-genchanges -B -mUbuntu/sparc Build Daemon dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20070622-1232 Publishing debug debs. chroot-autobuild/build/buildd/libieee1284-3-dev_0.2.10-6_sparc.deb: new debian package, version 2.0. size 54410 bytes: control archive= 1405 bytes. 790 bytes, 20 lines control 1849 bytes, 25 lines md5sums Package: libieee1284-3-dev Source: libieee1284 Version: 0.2.10-6 Architecture: sparc Maintainer: Ubuntu Core Developers Original-Maintainer: Julien BLACHE Installed-Size: 212 Depends: libieee1284-3 (= 0.2.10-6) Section: libdevel Priority: optional Description: cross-platform library for parallel port access [development files] This library was designed to ease the use of the parallel port. It will automatically figure out which access method is available, depending on the running kernel and the permissions of the process. . It handles particular queries to the devices, like fetching the Device ID of a device. . This package contains the development files needed to build your applications using the libieee1284. chroot-autobuild/build/buildd/libieee1284-3_0.2.10-6_sparc.deb: new debian package, version 2.0. size 28104 bytes: control archive= 962 bytes. 646 bytes, 17 lines control 428 bytes, 6 lines md5sums 135 bytes, 7 lines * postinst #!/bin/sh 132 bytes, 7 lines * postrm #!/bin/sh 28 bytes, 1 lines shlibs Package: libieee1284-3 Source: libieee1284 Version: 0.2.10-6 Architecture: sparc Maintainer: Ubuntu Core Developers Original-Maintainer: Julien BLACHE Installed-Size: 104 Depends: libc6 (>= 2.5-5) Section: libs Priority: optional Description: cross-platform library for parallel port access This library was designed to ease the use of the parallel port. It will automatically figure out which access method is available, depending on the running kernel and the permissions of the process. . It handles particular queries to the devices, like fetching the Device ID of a device. chroot-autobuild/build/buildd/python-ieee1284_0.2.10-6_sparc.deb: new debian package, version 2.0. size 18328 bytes: control archive= 881 bytes. 611 bytes, 14 lines control 437 bytes, 5 lines md5sums 239 bytes, 7 lines * postinst #!/bin/sh 216 bytes, 7 lines * prerm #!/bin/sh Package: python-ieee1284 Source: libieee1284 Version: 0.2.10-6 Architecture: sparc Maintainer: Ubuntu Core Developers Original-Maintainer: Julien BLACHE Installed-Size: 124 Depends: libc6 (>= 2.5-5), libieee1284-3, python-support (>= 0.3.4), python (<< 2.6), python (>= 2.4) Provides: python2.4-ieee1284, python2.5-ieee1284 Section: python Priority: optional Description: Python bindings to libieee1284 This module offers bindings to libieee1284, a cross-platform library for parallel port access. The library runs on Linux, BSD, Windows, Solaris. chroot-autobuild/build/buildd/libieee1284-3-dev_0.2.10-6_sparc.deb: drwxr-xr-x root/root 0 2007-06-22 12:31:55 ./ drwxr-xr-x root/root 0 2007-06-22 12:31:49 ./usr/ drwxr-xr-x root/root 0 2007-06-22 12:31:53 ./usr/lib/ -rw-r--r-- root/root 58276 2007-06-22 12:31:53 ./usr/lib/libieee1284.a -rw-r--r-- root/root 812 2007-06-22 12:31:18 ./usr/lib/libieee1284.la drwxr-xr-x root/root 0 2007-06-22 12:31:49 ./usr/include/ -rw-r--r-- root/root 9572 2007-06-22 12:31:19 ./usr/include/ieee1284.h drwxr-xr-x root/root 0 2007-06-22 12:31:49 ./usr/share/ drwxr-xr-x root/root 0 2007-06-22 12:31:19 ./usr/share/man/ drwxr-xr-x root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ -rw-r--r-- root/root 569 2007-06-22 12:31:19 ./usr/share/man/man3/parport.3.gz -rw-r--r-- root/root 747 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_find_ports.3.gz -rw-r--r-- root/root 618 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_free_ports.3.gz -rw-r--r-- root/root 1734 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_get_deviceid.3.gz -rw-r--r-- root/root 1488 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_open.3.gz -rw-r--r-- root/root 623 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_close.3.gz -rw-r--r-- root/root 750 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_ref.3.gz -rw-r--r-- root/root 780 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_claim.3.gz -rw-r--r-- root/root 1242 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_read_data.3.gz -rw-r--r-- root/root 1402 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_read_status.3.gz -rw-r--r-- root/root 1841 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_negotiate.3.gz -rw-r--r-- root/root 1111 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_get_irq_fd.3.gz -rw-r--r-- root/root 1812 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_nibble_read.3.gz -rw-r--r-- root/root 1784 2007-06-22 12:31:19 ./usr/share/man/man3/libieee1284.3.gz -rw-r--r-- root/root 501 2007-06-22 12:31:19 ./usr/share/man/man3/parport_list.3.gz -rw-r--r-- root/root 553 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_release.3.gz -rw-r--r-- root/root 1556 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_read_control.3.gz -rw-r--r-- root/root 769 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_ecp_fwd_to_rev.3.gz -rw-r--r-- root/root 780 2007-06-22 12:31:19 ./usr/share/man/man3/ieee1284_set_timeout.3.gz drwxr-xr-x root/root 0 2007-06-22 12:31:49 ./usr/share/doc/ drwxr-xr-x root/root 0 2007-06-22 12:31:54 ./usr/share/doc/libieee1284-3-dev/ -rw-r--r-- root/root 1137 2007-06-22 12:30:43 ./usr/share/doc/libieee1284-3-dev/copyright -rw-r--r-- root/root 6712 2005-03-22 13:22:05 ./usr/share/doc/libieee1284-3-dev/changelog.gz -rw-r--r-- root/root 1267 2007-06-22 12:30:43 ./usr/share/doc/libieee1284-3-dev/changelog.Debian.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:50 ./usr/lib/libieee1284.so -> libieee1284.so.3.2.2 lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_unref.3.gz -> ieee1284_ref.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_write_data.3.gz -> ieee1284_read_data.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_data_dir.3.gz -> ieee1284_read_data.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_terminate.3.gz -> ieee1284_negotiate.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_frob_control.3.gz -> ieee1284_read_control.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_do_nack_handshake.3.gz -> ieee1284_read_control.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_ecp_rev_to_fwd.3.gz -> ieee1284_ecp_fwd_to_rev.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_wait_data.3.gz -> ieee1284_read_data.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_byte_read.3.gz -> ieee1284_nibble_read.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_epp_write_data.3.gz -> ieee1284_nibble_read.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_epp_read_addr.3.gz -> ieee1284_nibble_read.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_epp_write_addr.3.gz -> ieee1284_nibble_read.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_ecp_write_data.3.gz -> ieee1284_nibble_read.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_compat_write.3.gz -> ieee1284_nibble_read.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_ecp_write_addr.3.gz -> ieee1284_nibble_read.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_write_control.3.gz -> ieee1284_read_control.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_epp_read_data.3.gz -> ieee1284_nibble_read.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_ecp_read_addr.3.gz -> ieee1284_nibble_read.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_ecp_read_data.3.gz -> ieee1284_nibble_read.3.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:54 ./usr/share/man/man3/ieee1284_wait_status.3.gz -> ieee1284_read_status.3.gz chroot-autobuild/build/buildd/libieee1284-3_0.2.10-6_sparc.deb: drwxr-xr-x root/root 0 2007-06-22 12:31:54 ./ drwxr-xr-x root/root 0 2007-06-22 12:31:49 ./usr/ drwxr-xr-x root/root 0 2007-06-22 12:31:53 ./usr/lib/ -rw-r--r-- root/root 38936 2007-06-22 12:31:53 ./usr/lib/libieee1284.so.3.2.2 drwxr-xr-x root/root 0 2007-06-22 12:31:49 ./usr/share/ drwxr-xr-x root/root 0 2007-06-22 12:31:49 ./usr/share/doc/ drwxr-xr-x root/root 0 2007-06-22 12:31:54 ./usr/share/doc/libieee1284-3/ -rw-r--r-- root/root 2262 2002-09-19 09:19:50 ./usr/share/doc/libieee1284-3/README -rw-r--r-- root/root 556 2004-08-09 10:21:05 ./usr/share/doc/libieee1284-3/TODO -rw-r--r-- root/root 1137 2007-06-22 12:30:43 ./usr/share/doc/libieee1284-3/copyright -rw-r--r-- root/root 6712 2005-03-22 13:22:05 ./usr/share/doc/libieee1284-3/changelog.gz -rw-r--r-- root/root 1267 2007-06-22 12:30:43 ./usr/share/doc/libieee1284-3/changelog.Debian.gz lrwxrwxrwx root/root 0 2007-06-22 12:31:50 ./usr/lib/libieee1284.so.3 -> libieee1284.so.3.2.2 chroot-autobuild/build/buildd/python-ieee1284_0.2.10-6_sparc.deb: drwxr-xr-x root/root 0 2007-06-22 12:31:54 ./ drwxr-xr-x root/root 0 2007-06-22 12:31:49 ./usr/ drwxr-xr-x root/root 0 2007-06-22 12:31:55 ./usr/lib/ drwxr-xr-x root/root 0 2007-06-22 12:31:55 ./usr/lib/python-support/ drwxr-xr-x root/root 0 2007-06-22 12:31:55 ./usr/lib/python-support/python-ieee1284/ drwxr-xr-x root/root 0 2007-06-22 12:31:55 ./usr/lib/python-support/python-ieee1284/python2.5/ -rw-r--r-- root/root 21748 2007-06-22 12:31:53 ./usr/lib/python-support/python-ieee1284/python2.5/ieee1284module.so drwxr-xr-x root/root 0 2007-06-22 12:31:55 ./usr/lib/python-support/python-ieee1284/python2.4/ -rw-r--r-- root/root 21748 2007-06-22 12:31:53 ./usr/lib/python-support/python-ieee1284/python2.4/ieee1284module.so drwxr-xr-x root/root 0 2007-06-22 12:31:55 ./usr/share/ drwxr-xr-x root/root 0 2007-06-22 12:31:49 ./usr/share/doc/ drwxr-xr-x root/root 0 2007-06-22 12:31:54 ./usr/share/doc/python-ieee1284/ -rw-r--r-- root/root 1137 2007-06-22 12:30:43 ./usr/share/doc/python-ieee1284/copyright -rw-r--r-- root/root 6712 2005-03-22 13:22:05 ./usr/share/doc/python-ieee1284/changelog.gz -rw-r--r-- root/root 1267 2007-06-22 12:30:43 ./usr/share/doc/python-ieee1284/changelog.Debian.gz drwxr-xr-x root/root 0 2007-06-22 12:31:55 ./usr/share/python-support/ drwxr-xr-x root/root 0 2007-06-22 12:31:55 ./usr/share/python-support/python-ieee1284/ libieee1284_0.2.10-6_sparc.changes: Format: 1.7 Date: Wed, 20 Jun 2007 21:07:23 +0200 Source: libieee1284 Binary: libieee1284-3-dev python-ieee1284 libieee1284-3 Architecture: sparc Version: 0.2.10-6 Distribution: autobuild Urgency: low Maintainer: Ubuntu/sparc Build Daemon Changed-By: Julien BLACHE Description: libieee1284-3 - cross-platform library for parallel port access libieee1284-3-dev - cross-platform library for parallel port access [development file python-ieee1284 - Python bindings to libieee1284 Changes: libieee1284 (0.2.10-6) unstable; urgency=low . * debian/control: + Use ${binary:Version} instead of ${Source-Version}. Files: dc07d032250f72f51a857ba94e66f897 54410 libdevel optional libieee1284-3-dev_0.2.10-6_sparc.deb fad13d45fb0961f56e924ce235510853 28104 libs optional libieee1284-3_0.2.10-6_sparc.deb 3c966fa328621679900ee1b6073f8714 18328 python optional python-ieee1284_0.2.10-6_sparc.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/libieee1284-0.2.10 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --root=/home/buildd/build-351273-832183/chroot-autobuild --purge intltool-debian mime-support readline-common gettext file dpatch python2.5 python2.4 html2text python2.4-dev gettext-base debhelper autotools-dev po-debconf python libmagic1 libreadline5 libbz2-1.0 python-support python2.4-minimal libsqlite3-0 python2.5-dev chrpath python-all-dev python-all python-dev libssl0.9.8 libncursesw5 (Reading database ... 12012 files and directories currently installed.) Removing dpatch ... Purging configuration files for dpatch ... Removing debhelper ... Removing autotools-dev ... Removing po-debconf ... Removing python-support ... Purging configuration files for python-support ... Removing chrpath ... Removing python-all-dev ... Removing python-all ... Removing python-dev ... Removing intltool-debian ... Removing gettext ... Removing file ... Purging configuration files for file ... Removing html2text ... Purging configuration files for html2text ... Removing python2.4-dev ... Removing gettext-base ... Removing python ... Purging configuration files for python ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing python2.5-dev ... Removing python2.5 ... Purging configuration files for python2.5 ... Removing python2.4 ... Purging configuration files for python2.4 ... Removing libreadline5 ... Purging configuration files for libreadline5 ... Removing libbz2-1.0 ... Purging configuration files for libbz2-1.0 ... Removing python2.4-minimal ... Unlinking and removing bytecode for runtime python2.4 Purging configuration files for python2.4-minimal ... Removing libsqlite3-0 ... Purging configuration files for libsqlite3-0 ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing libncursesw5 ... Purging configuration files for libncursesw5 ... Removing mime-support ... Purging configuration files for mime-support ... Removing readline-common ... Purging configuration files for readline-common ... ****************************************************************************** Finished at 20070622-1232 Build needed 00:01:17, 4836k disk space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '351273-832183'] Scanning for processes to kill in build 351273-832183... Scanning for processes to kill in build /home/buildd/build-351273-832183/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '351273-832183'] Unmounting chroot for build 351273-832183... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '351273-832183'] Removing build 351273-832183