RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '760997-1815131', '/home/buildd/filecache-default/d1f3d964cb4177bc7330894159c6f3c2b5321741'] Synching the system clock with the buildd NTP service... 6 Nov 10:41:24 ntpdate[15958]: adjust time server 10.211.37.1 offset 0.000679 sec Unpacking chroot for build 760997-1815131 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '760997-1815131'] Mounting chroot for build 760997-1815131 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '760997-1815131', 'universe'] Attempting OGRE for universe in build-760997-1815131 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '760997-1815131', 'deb http://ftpmaster.internal/ubuntu jaunty main universe'] Overriding sources.list in build-760997-1815131 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '760997-1815131'] Updating debian chroot for build 760997-1815131 Get:1 http://ftpmaster.internal jaunty Release.gpg [189B] Get:2 http://ftpmaster.internal jaunty Release [65.9kB] Get:3 http://ftpmaster.internal jaunty/main Packages [1257kB] Get:4 http://ftpmaster.internal jaunty/universe Packages [4545kB] Fetched 5868kB in 7s (809kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: libpam-foreground 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/8116B of archives. After this operation, 28.7kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libpam-foreground Authentication warning overridden. (Reading database ... 10689 files and directories currently installed.) Preparing to replace libpam-foreground 0.4-1 (using .../libpam-foreground_0.5_i386.deb) ... Unpacking replacement libpam-foreground ... Setting up libpam-foreground (0.5) ... unknown: apt/apt.conf.d/99buildd RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '760997-1815131', '--nolog', '--batch', '--archive=ubuntu', '-A', '--purpose=PRIMARY', '--dist=jaunty', '--comp=universe', 'libiptables-parse-perl_0.7-1.dsc'] Initiating build Automatic build of libiptables-parse-perl_0.7-1 on vernadsky by sbuild/i386 1.170.5 Build started at 20081106-1041 ****************************************************************************** libiptables-parse-perl_0.7-1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 5) Build-Depends-Indep: perl (>= 5.6.10-12) Checking for already installed source dependencies... debhelper: missing perl: already installed (5.10.0-17ubuntu1 >= 5.6.10-12 is satisfied) Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: dmsetup libdevmapper1.02.1 sysvutils perl-doc Use 'apt-get autoremove' to remove them. The following extra packages will be installed: bsdmainutils file gettext gettext-base groff-base html2text intltool-debian libmagic1 man-db po-debconf Suggested packages: wamerican wordlist whois vacation dh-make cvs gettext-doc groff less www-browser libmail-box-perl Recommended packages: curl wget lynx libmail-sendmail-perl libcompress-zlib-perl The following NEW packages will be installed: bsdmainutils debhelper file gettext gettext-base groff-base html2text intltool-debian libmagic1 man-db po-debconf 0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/5311kB of archives. After this operation, 19.7MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file bsdmainutils gettext-base groff-base man-db html2text gettext intltool-debian po-debconf debhelper debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Authentication warning overridden. Selecting previously deselected package libmagic1. (Reading database ... 10691 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_4.26-1_i386.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.26-1_i386.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_6.1.10ubuntu3_i386.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-3ubuntu2_i386.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.18.1.1-21_i386.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.2-3_i386.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-5_i386.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-3ubuntu2_i386.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.15ubuntu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.0.17ubuntu1_all.deb) ... Setting up libmagic1 (4.26-1) ... Setting up file (4.26-1) ... Setting up bsdmainutils (6.1.10ubuntu3) ... Setting up gettext-base (0.17-3ubuntu2) ... Setting up groff-base (1.18.1.1-21) ... Setting up man-db (2.5.2-3) ... Building database of manual pages ... ... skipping, since this is a buildd Setting up html2text (1.3.2a-5) ... Setting up gettext (0.17-3ubuntu2) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.15ubuntu1) ... Setting up debhelper (7.0.17ubuntu1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place unknown: apt/apt.conf.d/99buildd Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.8+20081027-0ubuntu6 make_3.81-5 dpkg-dev_1.14.22ubuntu1 g++-4.3_4.3.2-2ubuntu1 gcc-4.3_4.3.2-2ubuntu1 binutils_2.19-0ubuntu1 libstdc++6_4.3.2-2ubuntu1 libstdc++6-4.3-dev_4.3.2-2ubuntu1 ------------------------------------------------------------------------------ sh: gcc: not found dpkg-source: warning: Couldn't determine gcc system type, falling back to default (native compilation) gpg: Signature made Sun Oct 19 14:24:31 2008 BST using DSA key ID 00F3CFE4 gpg: Can't check signature: public key not found dpkg-source: extracting libiptables-parse-perl in libiptables-parse-perl-0.7 dpkg-source: unpacking libiptables-parse-perl_0.7.orig.tar.gz dpkg-source: applying /home/buildd/build-760997-1815131/libiptables-parse-perl_0.7-1.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package libiptables-parse-perl dpkg-buildpackage: source version 0.7-1 dpkg-buildpackage: host architecture i386 /usr/bin/fakeroot debian/rules clean dh_testdir dh_testroot dh_clean build-stamp install-stamp # Add commands to clean up after the build process here [ ! -f Makefile ] || /usr/bin/make realclean debian/rules build dh_testdir # Add commands to compile the package here /usr/bin/perl Makefile.PL INSTALLDIRS=vendor Checking if your kit is complete... Looks good Writing Makefile for IPTables::Parse /usr/bin/make make[1]: Entering directory `/build/buildd/libiptables-parse-perl-0.7' cp lib/IPTables/Parse.pm blib/lib/IPTables/Parse.pm Manifying blib/man3/IPTables::Parse.3pm make[1]: Leaving directory `/build/buildd/libiptables-parse-perl-0.7' /usr/bin/make test make[1]: Entering directory `/build/buildd/libiptables-parse-perl-0.7' PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/IPTables-Parse....ok All tests successful. Files=1, Tests=1, 0 wallclock secs ( 0.02 cusr + 0.03 csys = 0.05 CPU) make[1]: Leaving directory `/build/buildd/libiptables-parse-perl-0.7' touch build-stamp /usr/bin/fakeroot debian/rules binary dh_testdir dh_testroot dh_clean -k # Add commands to install the package into /build/buildd/libiptables-parse-perl-0.7/debian/libiptables-parse-perl here /usr/bin/make install DESTDIR=/build/buildd/libiptables-parse-perl-0.7/debian/libiptables-parse-perl PREFIX=/usr make[1]: Entering directory `/build/buildd/libiptables-parse-perl-0.7' Installing /build/buildd/libiptables-parse-perl-0.7/debian/libiptables-parse-perl/usr/share/perl5/IPTables/Parse.pm Installing /build/buildd/libiptables-parse-perl-0.7/debian/libiptables-parse-perl/usr/share/man/man3/IPTables::Parse.3pm make[1]: Leaving directory `/build/buildd/libiptables-parse-perl-0.7' [ ! -d /build/buildd/libiptables-parse-perl-0.7/debian/libiptables-parse-perl/usr/lib/perl5 ] || \ rmdir --ignore-fail-on-non-empty --parents --verbose \ /build/buildd/libiptables-parse-perl-0.7/debian/libiptables-parse-perl/usr/lib/perl5 touch install-stamp dh_testdir dh_testroot dh_installdocs dh_installchangelogs Changes dh_perl dh_compress dh_fixperms dh_installdeb dh_gencontrol dpkg-gencontrol: warning: unknown substitution variable ${misc:Depends} dh_md5sums dh_builddeb pkgstriptranslations: processing control file: ./debian/libiptables-parse-perl/DEBIAN/control, package libiptables-parse-perl, directory ./debian/libiptables-parse-perl pkgstriptranslations: libiptables-parse-perl does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu MOTU Developers " warning, `debian/libiptables-parse-perl/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `libiptables-parse-perl' in `../libiptables-parse-perl_0.7-1_all.deb'. dpkg-genchanges -b -mUbuntu/i386 Build Daemon >../libiptables-parse-perl_0.7-1_i386.changes dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20081106-1041 chroot-autobuild/build/buildd/libiptables-parse-perl_0.7-1_all.deb: new debian package, version 2.0. size 13468 bytes: control archive= 879 bytes. 859 bytes, 19 lines control 400 bytes, 5 lines md5sums Package: libiptables-parse-perl Version: 0.7-1 Architecture: all Maintainer: Ubuntu MOTU Developers Original-Maintainer: Debian Perl Group Installed-Size: 84 Depends: perl (>= 5.6.0-16) Conflicts: psad (<= 2.1.2-1) Replaces: psad (<= 2.1.2-1) Section: perl Priority: optional Homepage: http://www.cipherdyne.com/modules/ Description: Perl extension for parsing iptables firewall rulesets The IPTables::Parse package provides an interface to parse iptables rules on Linux systems through the direct execution of iptables commands, or from parsing a file that contains an iptables policy listing. You can get the current policy applied to a table/chain, look for a specific user-defined chain, check for a default DROP policy, or determing whether or not logging rules exist. chroot-autobuild/build/buildd/libiptables-parse-perl_0.7-1_all.deb: drwxr-xr-x root/root 0 2008-11-06 10:41 ./ drwxr-xr-x root/root 0 2008-11-06 10:41 ./usr/ drwxr-xr-x root/root 0 2008-11-06 10:41 ./usr/share/ drwxr-xr-x root/root 0 2008-11-06 10:41 ./usr/share/man/ drwxr-xr-x root/root 0 2008-11-06 10:41 ./usr/share/man/man3/ -rw-r--r-- root/root 3764 2008-11-06 10:41 ./usr/share/man/man3/IPTables::Parse.3pm.gz drwxr-xr-x root/root 0 2008-11-06 10:41 ./usr/share/perl5/ drwxr-xr-x root/root 0 2008-11-06 10:41 ./usr/share/perl5/IPTables/ -rw-r--r-- root/root 27153 2008-10-18 04:59 ./usr/share/perl5/IPTables/Parse.pm drwxr-xr-x root/root 0 2008-11-06 10:41 ./usr/share/doc/ drwxr-xr-x root/root 0 2008-11-06 10:41 ./usr/share/doc/libiptables-parse-perl/ -rw-r--r-- root/root 949 2008-11-06 10:41 ./usr/share/doc/libiptables-parse-perl/copyright -rw-r--r-- root/root 592 2008-10-18 04:59 ./usr/share/doc/libiptables-parse-perl/changelog.gz -rw-r--r-- root/root 312 2008-11-06 10:41 ./usr/share/doc/libiptables-parse-perl/changelog.Debian.gz libiptables-parse-perl_0.7-1_i386.changes: Format: 1.8 Date: Sat, 18 Oct 2008 10:47:35 +0200 Source: libiptables-parse-perl Binary: libiptables-parse-perl Architecture: all Version: 0.7-1 Distribution: jaunty Urgency: low Maintainer: Ubuntu/i386 Build Daemon Changed-By: Franck Joncourt Description: libiptables-parse-perl - Perl extension for parsing iptables firewall rulesets Changes: libiptables-parse-perl (0.7-1) unstable; urgency=low . * New upstream release * Bumped up Standards-Version to 3.8.0 (no changes). * Updated debian/copyright according to: http://wiki.debian.org/Proposals/CopyrightFormat Checksums-Sha1: c1dafb44b9dc5346330cd3485dd3b21e07968eaf 13468 libiptables-parse-perl_0.7-1_all.deb Checksums-Sha256: f714cf87d1b6a22dd33c656d9d7323ebb9fbf5c9f605378a243a81e7a880debe 13468 libiptables-parse-perl_0.7-1_all.deb Files: 7604451ab202965506518dd5057cd6e5 13468 perl optional libiptables-parse-perl_0.7-1_all.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/libiptables-parse-perl-0.7 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --root=/home/buildd/build-760997-1815131/chroot-autobuild --purge po-debconf intltool-debian groff-base libmagic1 gettext file bsdmainutils html2text gettext-base man-db debhelper (Reading database ... 11690 files and directories currently installed.) Removing debhelper ... Removing po-debconf ... Removing intltool-debian ... Removing gettext ... Removing file ... Purging configuration files for file ... Removing html2text ... Purging configuration files for html2text ... Removing gettext-base ... Removing man-db ... Purging configuration files for man-db ... Removing catpages as well as /var/cache/man hierarchy. dpkg - warning: while removing man-db, directory `/usr/share/doc/man-db/examples' not empty so not removed. dpkg - warning: while removing man-db, directory `/usr/share/doc/man-db' not empty so not removed. dpkg - warning: while removing man-db, directory `/usr/share/man-db' not empty so not removed. dpkg - warning: while removing man-db, directory `/usr/share/bug/man-db' not empty so not removed. dpkg - warning: while removing man-db, directory `/usr/lib/man-db' not empty so not removed. Removing groff-base ... Purging configuration files for groff-base ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Processing triggers for libc6 ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20081106-1042 Build needed 00:00:04, 336k disk space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '760997-1815131'] Scanning for processes to kill in build 760997-1815131... Scanning for processes to kill in build /home/buildd/build-760997-1815131/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '760997-1815131'] Unmounting chroot for build 760997-1815131... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '760997-1815131'] Removing build 760997-1815131