RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '605143-1558123', '/home/buildd/filecache-default/98a2b69f1174728d2ef8128d800d902108b5367f'] Synching the system clock with the buildd NTP service... 22 May 03:35:45 ntpdate[22618]: adjust time server 10.122.37.1 offset -0.000080 sec Unpacking chroot for build 605143-1558123 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '605143-1558123'] Mounting chroot for build 605143-1558123 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '605143-1558123', 'universe'] Attempting OGRE for universe in build-605143-1558123 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '605143-1558123', 'deb http://ftpmaster.internal/ubuntu intrepid main restricted universe'] Overriding sources.list in build-605143-1558123 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '605143-1558123'] Updating debian chroot for build 605143-1558123 Get:1 http://ftpmaster.internal intrepid Release.gpg [191B] Get:2 http://ftpmaster.internal intrepid Release [65.9kB] Get:3 http://ftpmaster.internal intrepid/main Packages [1152kB] Get:4 http://ftpmaster.internal intrepid/restricted Packages [1732B] Get:5 http://ftpmaster.internal intrepid/universe Packages [4211kB] Fetched 5431kB in 7s (688kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages have been kept back: perl perl-base perl-modules 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '605143-1558123', '--nolog', '--batch', '--archive=ubuntu', '--purpose=PRIMARY', '--dist=intrepid', '--comp=universe', 'liblrdf_0.4.0-1.1.dsc'] Initiating build Automatic build of liblrdf_0.4.0-1.1 on primero by sbuild/hppa 1.170.5 Build started at 20080522-0336 ****************************************************************************** liblrdf_0.4.0-1.1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>> 4.1.0), cdbs, dh-buildinfo, libraptor1-dev (>= 0.9.11), ladspa-sdk Checking for already installed source dependencies... debhelper: missing cdbs: missing dh-buildinfo: missing libraptor1-dev: missing ladspa-sdk: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper cdbs dh-buildinfo libraptor1-dev ladspa-sdk Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf automake1.7 autotools-dev bsdmainutils comerr-dev fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcurl3 libcurl4-openssl-dev libexpat1 libgcrypt11 libglib2.0-0 libgnutls13 libgpg-error0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libidn11 libidn11-dev libkadm55 libkeyutils1 libkrb5-dev libkrb53 libldap-2.4-2 libldap2-dev liblzo2-2 libmagic1 libopencdk10 libpcre3 libraptor1 libsasl2-2 libsasl2-modules libssl-dev libssl0.9.8 libtasn1-3 liburi-perl libwww-perl libxml-parser-perl libxml2 libxml2-dev libxslt1-dev libxslt1.1 m4 man-db pkg-config po-debconf zlib1g-dev Suggested packages: autobook autoconf-archive autoconf-doc autoconf2.13 gnu-standards libtool vacation wamerican wordlist whois devscripts doc-base dh-make cvs gettext-doc groff libcurl3-dbg rng-tools gnutls-bin krb5-doc krb5-user libraptor1-doc libsasl2-modules-gssapi-mit libsasl2-modules-gssapi-heimdal libsasl2-modules-ldap libsasl2-modules-otp libsasl2-modules-sql libio-socket-ssl-perl less www-browser Recommended packages: automake automaken curl wget lynx libglib2.0-data raptor-utils libcompress-zlib-perl libhtml-format-perl libmailtools-perl xml-core libmail-box-perl libmail-sendmail-perl The following NEW packages will be installed: autoconf automake1.7 autotools-dev bsdmainutils cdbs comerr-dev debhelper dh-buildinfo fdupes file gettext gettext-base groff-base html2text intltool intltool-debian ladspa-sdk libcurl3 libcurl4-openssl-dev libexpat1 libgcrypt11 libglib2.0-0 libgnutls13 libgpg-error0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libidn11 libidn11-dev libkadm55 libkeyutils1 libkrb5-dev libkrb53 libldap-2.4-2 libldap2-dev liblzo2-2 libmagic1 libopencdk10 libpcre3 libraptor1 libraptor1-dev libsasl2-2 libsasl2-modules libssl-dev libssl0.9.8 libtasn1-3 liburi-perl libwww-perl libxml-parser-perl libxml2 libxml2-dev libxslt1-dev libxslt1.1 m4 man-db pkg-config po-debconf zlib1g-dev 0 upgraded, 58 newly installed, 0 to remove and 3 not upgraded. Need to get 1091kB/22.1MB of archives. After unpacking 62.0MB of additional disk space will be used. Get:1 http://ftpmaster.internal intrepid/universe ladspa-sdk 1.1-6 [44.3kB] Get:2 http://ftpmaster.internal intrepid/main libraptor1 1.4.17-1 [170kB] Get:3 http://ftpmaster.internal intrepid/main libxslt1-dev 1.1.22-1ubuntu1 [643kB] Get:4 http://ftpmaster.internal intrepid/main libraptor1-dev 1.4.17-1 [233kB] Fetched 1091kB in 0s (2217kB/s) Selecting previously deselected package gettext-base. (Reading database ... 9565 files and directories currently installed.) Unpacking gettext-base (from .../gettext-base_0.17-2ubuntu1_hppa.deb) ... Selecting previously deselected package libgpg-error0. Unpacking libgpg-error0 (from .../libgpg-error0_1.4-2ubuntu7_hppa.deb) ... Selecting previously deselected package libgcrypt11. Unpacking libgcrypt11 (from .../libgcrypt11_1.2.4-2ubuntu7_hppa.deb) ... Selecting previously deselected package liblzo2-2. Unpacking liblzo2-2 (from .../liblzo2-2_2.03-1_hppa.deb) ... Selecting previously deselected package libopencdk10. Unpacking libopencdk10 (from .../libopencdk10_0.6.6-1ubuntu1_hppa.deb) ... Selecting previously deselected package libtasn1-3. Unpacking libtasn1-3 (from .../libtasn1-3_1.4-1_hppa.deb) ... Selecting previously deselected package libgnutls13. Unpacking libgnutls13 (from .../libgnutls13_2.0.4-1ubuntu2_hppa.deb) ... Selecting previously deselected package libidn11. Unpacking libidn11 (from .../libidn11_1.8-1_hppa.deb) ... Selecting previously deselected package libkeyutils1. Unpacking libkeyutils1 (from .../libkeyutils1_1.2-7_hppa.deb) ... Selecting previously deselected package libkrb53. Unpacking libkrb53 (from .../libkrb53_1.6.dfsg.3~beta1-2ubuntu1_hppa.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-10ubuntu1_hppa.deb) ... Selecting previously deselected package libsasl2-modules. Unpacking libsasl2-modules (from .../libsasl2-modules_2.1.22.dfsg1-18ubuntu2_hppa.deb) ... Selecting previously deselected package libsasl2-2. Unpacking libsasl2-2 (from .../libsasl2-2_2.1.22.dfsg1-18ubuntu2_hppa.deb) ... Selecting previously deselected package libldap-2.4-2. Unpacking libldap-2.4-2 (from .../libldap-2.4-2_2.4.7-6ubuntu3_hppa.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_6.1.10ubuntu2_hppa.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_4.24-2_hppa.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.24-2_hppa.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.18.1.1-20_hppa.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-0ubuntu1_hppa.deb) ... Selecting previously deselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously deselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.35.dfsg.1-1_all.deb) ... Selecting previously deselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.56-1_hppa.deb) ... Selecting previously deselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_3.23-1_all.deb) ... Selecting previously deselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_5.812-1_all.deb) ... Selecting previously deselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.36-1.1build1_hppa.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.2-1_hppa.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../archives/m4_1.4.11-1_hppa.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.61-7_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20080123.1_all.deb) ... Selecting previously deselected package automake1.7. Unpacking automake1.7 (from .../automake1.7_1.7.9-9_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-3build2_hppa.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-2ubuntu1_hppa.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.13_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.0.8ubuntu1_all.deb) ... Selecting previously deselected package fdupes. Unpacking fdupes (from .../fdupes_1.50-PR2-1_hppa.deb) ... Selecting previously deselected package intltool. Unpacking intltool (from .../intltool_0.37.1-1ubuntu1_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.52ubuntu1_all.deb) ... Selecting previously deselected package dh-buildinfo. Unpacking dh-buildinfo (from .../dh-buildinfo_0.9_all.deb) ... Selecting previously deselected package ladspa-sdk. Unpacking ladspa-sdk (from .../ladspa-sdk_1.1-6_hppa.deb) ... Selecting previously deselected package libcurl3. Unpacking libcurl3 (from .../libcurl3_7.18.0-1ubuntu2_hppa.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.4-1ubuntu1_hppa.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.16.3-2_hppa.deb) ... Selecting previously deselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.22-1_hppa.deb) ... Selecting previously deselected package libidn11-dev. Unpacking libidn11-dev (from .../libidn11-dev_1.8-1_hppa.deb) ... Selecting previously deselected package comerr-dev. Unpacking comerr-dev (from .../comerr-dev_2.1-1.40.8-2ubuntu2_hppa.deb) ... Selecting previously deselected package libkadm55. Unpacking libkadm55 (from .../libkadm55_1.6.dfsg.3~beta1-2ubuntu1_hppa.deb) ... Selecting previously deselected package libkrb5-dev. Unpacking libkrb5-dev (from .../libkrb5-dev_1.6.dfsg.3~beta1-2ubuntu1_hppa.deb) ... Selecting previously deselected package libldap2-dev. Unpacking libldap2-dev (from .../libldap2-dev_2.4.7-6ubuntu3_hppa.deb) ... Selecting previously deselected package zlib1g-dev. Unpacking zlib1g-dev (from .../zlib1g-dev_1%3a1.2.3.3.dfsg-12ubuntu1_hppa.deb) ... Selecting previously deselected package libssl-dev. Unpacking libssl-dev (from .../libssl-dev_0.9.8g-10ubuntu1_hppa.deb) ... Selecting previously deselected package libcurl4-openssl-dev. Unpacking libcurl4-openssl-dev (from .../libcurl4-openssl-dev_7.18.0-1ubuntu2_hppa.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.6.31.dfsg-2ubuntu1_hppa.deb) ... Selecting previously deselected package libxslt1.1. Unpacking libxslt1.1 (from .../libxslt1.1_1.1.22-1ubuntu1_hppa.deb) ... Selecting previously deselected package libraptor1. Unpacking libraptor1 (from .../libraptor1_1.4.17-1_hppa.deb) ... Selecting previously deselected package libxml2-dev. Unpacking libxml2-dev (from .../libxml2-dev_2.6.31.dfsg-2ubuntu1_hppa.deb) ... Selecting previously deselected package libxslt1-dev. Unpacking libxslt1-dev (from .../libxslt1-dev_1.1.22-1ubuntu1_hppa.deb) ... Selecting previously deselected package libraptor1-dev. Unpacking libraptor1-dev (from .../libraptor1-dev_1.4.17-1_hppa.deb) ... Setting up gettext-base (0.17-2ubuntu1) ... Setting up libgpg-error0 (1.4-2ubuntu7) ... Setting up libgcrypt11 (1.2.4-2ubuntu7) ... Setting up liblzo2-2 (2.03-1) ... Setting up libopencdk10 (0.6.6-1ubuntu1) ... Setting up libtasn1-3 (1.4-1) ... Setting up libgnutls13 (2.0.4-1ubuntu2) ... Setting up libidn11 (1.8-1) ... Setting up libkeyutils1 (1.2-7) ... Setting up libkrb53 (1.6.dfsg.3~beta1-2ubuntu1) ... Setting up libssl0.9.8 (0.9.8g-10ubuntu1) ... Setting up bsdmainutils (6.1.10ubuntu2) ... Setting up libmagic1 (4.24-2) ... Setting up file (4.24-2) ... Setting up groff-base (1.18.1.1-20) ... Setting up libexpat1 (2.0.1-0ubuntu1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up liburi-perl (1.35.dfsg.1-1) ... Setting up libhtml-parser-perl (3.56-1) ... Setting up libhtml-tree-perl (3.23-1) ... Setting up libwww-perl (5.812-1) ... Setting up libxml-parser-perl (2.36-1.1build1) ... Setting up man-db (2.5.2-1) ... Building database of manual pages ... Setting up m4 (1.4.11-1) ... Setting up autoconf (2.61-7) ... Setting up autotools-dev (20080123.1) ... Setting up automake1.7 (1.7.9-9) ... Setting up html2text (1.3.2a-3build2) ... Setting up gettext (0.17-2ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.13) ... Setting up debhelper (7.0.8ubuntu1) ... Setting up fdupes (1.50-PR2-1) ... Setting up intltool (0.37.1-1ubuntu1) ... Setting up cdbs (0.4.52ubuntu1) ... Setting up dh-buildinfo (0.9) ... Setting up ladspa-sdk (1.1-6) ... Setting up libpcre3 (7.4-1ubuntu1) ... Setting up libglib2.0-0 (2.16.3-2) ... Setting up pkg-config (0.22-1) ... Setting up libidn11-dev (1.8-1) ... Setting up comerr-dev (2.1-1.40.8-2ubuntu2) ... Setting up libkadm55 (1.6.dfsg.3~beta1-2ubuntu1) ... Setting up libkrb5-dev (1.6.dfsg.3~beta1-2ubuntu1) ... Setting up zlib1g-dev (1.2.3.3.dfsg-12ubuntu1) ... Setting up libssl-dev (0.9.8g-10ubuntu1) ... Setting up libxml2 (2.6.31.dfsg-2ubuntu1) ... Setting up libxslt1.1 (1.1.22-1ubuntu1) ... Setting up libxml2-dev (2.6.31.dfsg-2ubuntu1) ... Setting up libxslt1-dev (1.1.22-1ubuntu1) ... Setting up libsasl2-modules (2.1.22.dfsg1-18ubuntu2) ... Setting up libsasl2-2 (2.1.22.dfsg1-18ubuntu2) ... Setting up libldap-2.4-2 (2.4.7-6ubuntu3) ... Setting up libcurl3 (7.18.0-1ubuntu2) ... Setting up libldap2-dev (2.4.7-6ubuntu3) ... Setting up libcurl4-openssl-dev (7.18.0-1ubuntu2) ... Setting up libraptor1 (1.4.17-1) ... Setting up libraptor1-dev (1.4.17-1) ... Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.6.1-6ubuntu2 make_3.81-4 dpkg-dev_1.14.16.6ubuntu3 gcc-4.3_4.3.0-4ubuntu1 g++-4.3_4.3.0-4ubuntu1 binutils_2.18.50.20080509-0ubuntu1 libstdc++6_4.3.0-4ubuntu1 libstdc++6-4.3-dev_4.3.0-4ubuntu1 ------------------------------------------------------------------------------ dpkg-source: extracting liblrdf in liblrdf-0.4.0 dpkg-source: unpacking liblrdf_0.4.0.orig.tar.gz dpkg-source: applying /home/buildd/build-605143-1558123/liblrdf_0.4.0-1.1.diff.gz dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: source package liblrdf dpkg-buildpackage: source version 0.4.0-1.1 dpkg-buildpackage: host architecture hppa /usr/bin/fakeroot debian/rules clean test -x debian/rules test "`id -u`" = 0 for i in ./config.guess ./config.sub ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done /usr/bin/make -C . -k distclean make[1]: Entering directory `/build/buildd/liblrdf-0.4.0' make[1]: *** No rule to make target `distclean'. make[1]: Leaving directory `/build/buildd/liblrdf-0.4.0' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-build rm -f debian/stamp-autotools-files dh_clean debian/rules build test -x debian/rules mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi touch debian/stamp-autotools-files chmod a+x /build/buildd/liblrdf-0.4.0/./configure cd . && CC="cc" CXX="g++" CFLAGS="-g -O2 -g -Wall -O2" CXXFLAGS="-g -O2 -g -Wall -O2" CPPFLAGS="" LDFLAGS="-Wl,-Bsymbolic-functions" /build/buildd/liblrdf-0.4.0/./configure --build=hppa-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/liblrdf" --disable-maintainer-mode --disable-dependency-tracking --srcdir=. checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for gawk... (cached) mawk checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking for style of include used by make... GNU checking dependency style of cc... none checking how to run the C preprocessor... cc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking build system type... hppa-unknown-linux-gnu checking host system type... hppa-unknown-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for egrep... grep -E checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for epcf90... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for gfortran... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc static flag works... yes checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes appending configuration tag "F77" to libtool checking for ANSI C header files... (cached) yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking for pkg-config... /usr/bin/pkg-config checking for raptor >= 0.9.11... yes checking RAPTOR_CFLAGS... checking RAPTOR_LIBS... -lraptor checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking for vprintf... yes checking for _doprnt... no checking for getcwd... yes checking for strcasecmp... yes checking for strchr... yes checking for strdup... yes checking for strerror... yes checking for strncasecmp... yes checking for strrchr... yes configure: creating ./config.status config.status: creating lrdf.pc config.status: creating Makefile config.status: creating src/Makefile config.status: creating examples/Makefile config.status: creating config.h config.status: executing depfiles commands /usr/bin/make -C . make[1]: Entering directory `/build/buildd/liblrdf-0.4.0' cd . && /bin/bash /build/buildd/liblrdf-0.4.0/missing --run autoheader touch ./config.h.in cd . && /bin/bash ./config.status config.h config.status: creating config.h /usr/bin/make all-recursive make[2]: Entering directory `/build/buildd/liblrdf-0.4.0' Making all in src make[3]: Entering directory `/build/buildd/liblrdf-0.4.0/src' /bin/bash ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -Wall -g -I.. -c -o lrdf.lo `test -f 'lrdf.c' || echo './'`lrdf.c mkdir .libs cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -Wall -g -I.. -c lrdf.c -fPIC -DPIC -o .libs/lrdf.o lrdf.c: In function 'lrdf_read_file_intl': lrdf.c:596: warning: pointer targets in passing argument 1 of 'raptor_new_uri' differ in signedness lrdf.c:597: warning: pointer targets in passing argument 1 of 'raptor_new_uri' differ in signedness cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -Wall -g -I.. -c lrdf.c -o lrdf.o >/dev/null 2>&1 /bin/bash ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -Wall -g -I.. -c -o lrdf_multi.lo `test -f 'lrdf_multi.c' || echo './'`lrdf_multi.c cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -Wall -g -I.. -c lrdf_multi.c -fPIC -DPIC -o .libs/lrdf_multi.o cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -Wall -g -I.. -c lrdf_multi.c -o lrdf_multi.o >/dev/null 2>&1 /bin/bash ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -Wall -g -I.. -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -Wall -g -I.. -c md5.c -fPIC -DPIC -o .libs/md5.o cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -Wall -g -I.. -c md5.c -o md5.o >/dev/null 2>&1 /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -Wall -g -I.. -Wl,-Bsymbolic-functions -o liblrdf.la -rpath /usr/lib lrdf.lo lrdf_multi.lo md5.lo -lraptor -lraptor cc -shared .libs/lrdf.o .libs/lrdf_multi.o .libs/md5.o /usr/lib/libraptor.so -Wl,-Bsymbolic-functions -Wl,-soname -Wl,liblrdf.so.0 -o .libs/liblrdf.so.0.0.0 (cd .libs && rm -f liblrdf.so.0 && ln -s liblrdf.so.0.0.0 liblrdf.so.0) (cd .libs && rm -f liblrdf.so && ln -s liblrdf.so.0.0.0 liblrdf.so) ar cru .libs/liblrdf.a lrdf.o lrdf_multi.o md5.o ranlib .libs/liblrdf.a creating liblrdf.la (cd .libs && rm -f liblrdf.la && ln -s ../liblrdf.la liblrdf.la) make[3]: Leaving directory `/build/buildd/liblrdf-0.4.0/src' Making all in examples make[3]: Entering directory `/build/buildd/liblrdf-0.4.0/examples' cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'showdefaults.c' || echo './'`showdefaults.c showdefaults.c: In function 'main': showdefaults.c:43: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o showdefaults showdefaults.o ../src/liblrdf.la mkdir .libs cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/showdefaults showdefaults.o ../src/.libs/liblrdf.so creating showdefaults cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'showtaxonomy.c' || echo './'`showtaxonomy.c /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o showtaxonomy showtaxonomy.o ../src/liblrdf.la cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/showtaxonomy showtaxonomy.o ../src/.libs/liblrdf.so creating showtaxonomy cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'dumpstatements.c' || echo './'`dumpstatements.c /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o dumpstatements dumpstatements.o ../src/liblrdf.la cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/dumpstatements dumpstatements.o ../src/.libs/liblrdf.so creating dumpstatements cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'export_test.c' || echo './'`export_test.c /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o export_test export_test.o ../src/liblrdf.la cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/export_test export_test.o ../src/.libs/liblrdf.so creating export_test cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'subclass_test.c' || echo './'`subclass_test.c /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o subclass_test subclass_test.o ../src/liblrdf.la cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/subclass_test subclass_test.o ../src/.libs/liblrdf.so creating subclass_test cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'add_test.c' || echo './'`add_test.c /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o add_test add_test.o ../src/liblrdf.la cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/add_test add_test.o ../src/.libs/liblrdf.so creating add_test cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'instances_test.c' || echo './'`instances_test.c /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o instances_test instances_test.o ../src/liblrdf.la cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/instances_test instances_test.o ../src/.libs/liblrdf.so creating instances_test cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'remove_test.c' || echo './'`remove_test.c remove_test.c: In function 'main': remove_test.c:15: warning: unused variable 'i' remove_test.c:13: warning: unused variable 'ulist' /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o remove_test remove_test.o ../src/liblrdf.la cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/remove_test remove_test.o ../src/.libs/liblrdf.so creating remove_test cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'multi_test.c' || echo './'`multi_test.c /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o multi_test multi_test.o ../src/liblrdf.la cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/multi_test multi_test.o ../src/.libs/liblrdf.so creating multi_test cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'setting_test.c' || echo './'`setting_test.c setting_test.c: In function 'main': setting_test.c:44: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o setting_test setting_test.o ../src/liblrdf.la cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/setting_test setting_test.o ../src/.libs/liblrdf.so creating setting_test cc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -c `test -f 'scale_test.c' || echo './'`scale_test.c /bin/bash ../libtool --mode=link cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o scale_test scale_test.o ../src/liblrdf.la cc -g -O2 -g -Wall -O2 -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o .libs/scale_test scale_test.o ../src/.libs/liblrdf.so creating scale_test make[3]: Leaving directory `/build/buildd/liblrdf-0.4.0/examples' make[3]: Entering directory `/build/buildd/liblrdf-0.4.0' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/build/buildd/liblrdf-0.4.0' make[2]: Leaving directory `/build/buildd/liblrdf-0.4.0' make[1]: Leaving directory `/build/buildd/liblrdf-0.4.0' touch debian/stamp-makefile-build DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/fakeroot debian/rules binary-arch test -x debian/rules test "`id -u`" = 0 dh_clean -k dh_installdirs -A mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/make -C . install DESTDIR=/build/buildd/liblrdf-0.4.0/debian/tmp/ make[1]: Entering directory `/build/buildd/liblrdf-0.4.0' Making install in src make[2]: Entering directory `/build/buildd/liblrdf-0.4.0/src' make[3]: Entering directory `/build/buildd/liblrdf-0.4.0/src' /bin/bash ../mkinstalldirs /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib mkdir -p -- /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib /bin/bash ../libtool --mode=install /usr/bin/install -c liblrdf.la /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib/liblrdf.la /usr/bin/install -c .libs/liblrdf.so.0.0.0 /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib/liblrdf.so.0.0.0 (cd /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib && rm -f liblrdf.so.0 && ln -s liblrdf.so.0.0.0 liblrdf.so.0) (cd /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib && rm -f liblrdf.so && ln -s liblrdf.so.0.0.0 liblrdf.so) /usr/bin/install -c .libs/liblrdf.lai /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib/liblrdf.la /usr/bin/install -c .libs/liblrdf.a /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib/liblrdf.a ranlib /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib/liblrdf.a chmod 644 /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib/liblrdf.a libtool: install: warning: remember to run `libtool --finish /usr/lib' make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/liblrdf-0.4.0/src' make[2]: Leaving directory `/build/buildd/liblrdf-0.4.0/src' Making install in examples make[2]: Entering directory `/build/buildd/liblrdf-0.4.0/examples' make[3]: Entering directory `/build/buildd/liblrdf-0.4.0/examples' make[3]: Nothing to be done for `install-exec-am'. /bin/bash ../mkinstalldirs /build/buildd/liblrdf-0.4.0/debian/tmp//usr/share/ladspa/rdf mkdir -p -- /build/buildd/liblrdf-0.4.0/debian/tmp//usr/share/ladspa/rdf /usr/bin/install -c -m 644 ladspa.rdfs /build/buildd/liblrdf-0.4.0/debian/tmp//usr/share/ladspa/rdf/ladspa.rdfs make[3]: Leaving directory `/build/buildd/liblrdf-0.4.0/examples' make[2]: Leaving directory `/build/buildd/liblrdf-0.4.0/examples' make[2]: Entering directory `/build/buildd/liblrdf-0.4.0' make[3]: Entering directory `/build/buildd/liblrdf-0.4.0' make[3]: Nothing to be done for `install-exec-am'. /bin/bash ./mkinstalldirs /build/buildd/liblrdf-0.4.0/debian/tmp//usr/include mkdir -p -- /build/buildd/liblrdf-0.4.0/debian/tmp//usr/include /usr/bin/install -c -m 644 lrdf.h /build/buildd/liblrdf-0.4.0/debian/tmp//usr/include/lrdf.h /usr/bin/install -c -m 644 lrdf_types.h /build/buildd/liblrdf-0.4.0/debian/tmp//usr/include/lrdf_types.h /bin/bash ./mkinstalldirs /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib/pkgconfig mkdir -p -- /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib/pkgconfig /usr/bin/install -c -m 644 lrdf.pc /build/buildd/liblrdf-0.4.0/debian/tmp//usr/lib/pkgconfig/lrdf.pc make[3]: Leaving directory `/build/buildd/liblrdf-0.4.0' make[2]: Leaving directory `/build/buildd/liblrdf-0.4.0' make[1]: Leaving directory `/build/buildd/liblrdf-0.4.0' dh_installdirs -pliblrdf0-dev dh_installdirs -pliblrdf0 dh_installdocs -pliblrdf0-dev ./README ./NEWS ./AUTHORS dh_installexamples -pliblrdf0-dev dh_installman -pliblrdf0-dev dh_installinfo -pliblrdf0-dev dh_installmenu -pliblrdf0-dev dh_installcron -pliblrdf0-dev dh_installinit -pliblrdf0-dev dh_installdebconf -pliblrdf0-dev dh_installemacsen -pliblrdf0-dev dh_installcatalogs -pliblrdf0-dev dh_installpam -pliblrdf0-dev dh_installlogrotate -pliblrdf0-dev dh_installlogcheck -pliblrdf0-dev dh_installchangelogs -pliblrdf0-dev dh_installudev -pliblrdf0-dev dh_lintian -pliblrdf0-dev dh_install -pliblrdf0-dev dh_link -pliblrdf0-dev dh_installmime -pliblrdf0-dev dh_installdocs -pliblrdf0 ./README ./NEWS ./AUTHORS dh_installexamples -pliblrdf0 dh_installman -pliblrdf0 dh_installinfo -pliblrdf0 dh_installmenu -pliblrdf0 dh_installcron -pliblrdf0 dh_installinit -pliblrdf0 dh_installdebconf -pliblrdf0 dh_installemacsen -pliblrdf0 dh_installcatalogs -pliblrdf0 dh_installpam -pliblrdf0 dh_installlogrotate -pliblrdf0 dh_installlogcheck -pliblrdf0 dh_installchangelogs -pliblrdf0 dh_installudev -pliblrdf0 dh_lintian -pliblrdf0 dh_install -pliblrdf0 dh_link -pliblrdf0 dh_installmime -pliblrdf0 dh_buildinfo dh_strip -pliblrdf0-dev dh_strip debug symbol extraction: all non-arch-all packages for this build platform hppa: liblrdf0-dev liblrdf0 dh_strip debug symbol extraction: packages to act on: liblrdf0-dev dh_strip debug symbol extraction: ignored packages: dh_compress -pliblrdf0-dev dh_fixperms -pliblrdf0-dev dh_makeshlibs -pliblrdf0-dev dh_strip -pliblrdf0 dh_strip debug symbol extraction: all non-arch-all packages for this build platform hppa: liblrdf0-dev liblrdf0 dh_strip debug symbol extraction: packages to act on: liblrdf0 dh_strip debug symbol extraction: ignored packages: pkgstriptranslations: processing control file: ./debian/liblrdf0-dbgsym/DEBIAN/control, package liblrdf0-dbgsym, directory ./debian/liblrdf0-dbgsym pkgstriptranslations: liblrdf0-dbgsym does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball dpkg-deb: building package `liblrdf0-dbgsym' in `../liblrdf0-dbgsym_0.4.0-1.1_hppa.ddeb'. dh_compress -pliblrdf0 dh_fixperms -pliblrdf0 dh_makeshlibs -pliblrdf0 dh_installdeb -pliblrdf0-dev dh_perl -pliblrdf0-dev dh_shlibdeps -pliblrdf0-dev dh_installdeb -pliblrdf0 dh_perl -pliblrdf0 dh_shlibdeps -pliblrdf0 dh_gencontrol -pliblrdf0-dev # symlink identical documentation to depending packages [ -n "$CDBS_NO_DOC_SYMLINKING" ] || \ [ -h debian/liblrdf0-dev/usr/share/doc ] || \ [ ! -d debian/liblrdf0-dev/usr/share/doc ] || \ for dep in `perl -ne 'if (/^(Pre-)?Depends:/) {s/^\w+://; foreach (split /,/) { split; print($_[0], "\n"); } }' debian/liblrdf0-dev/DEBIAN/control`; do \ if [ -d debian/$dep/usr/share/doc ]; then \ echo "Searching for duplicated docs in dependency $dep..."; \ rootdir=`pwd`; \ (cd debian/liblrdf0-dev/usr/share/doc/liblrdf0-dev; find -type f ! -name copyright | while read f; do \ thisfile="$rootdir/debian/liblrdf0-dev/usr/share/doc/liblrdf0-dev/$f"; \ depfile="$rootdir/debian/$dep/usr/share/doc/$dep/$f"; \ if [ -f $depfile -o -L $depfile ] && zcmp $thisfile $depfile >/dev/null; then \ echo " symlinking $f in liblrdf0-dev to file in $dep"; \ rm $thisfile; ln -s /usr/share/doc/$dep/$f $thisfile; \ fi; \ done ); \ fi; \ done Searching for duplicated docs in dependency liblrdf0... symlinking ./README in liblrdf0-dev to file in liblrdf0 symlinking ./AUTHORS in liblrdf0-dev to file in liblrdf0 symlinking ./buildinfo.gz in liblrdf0-dev to file in liblrdf0 symlinking ./NEWS.gz in liblrdf0-dev to file in liblrdf0 symlinking ./changelog.Debian.gz in liblrdf0-dev to file in liblrdf0 # symlink identical Gnome help files within packages if [ -z "$CDBS_NO_GNOME_HELP_SYMLINKING" ] && [ -d debian/liblrdf0-dev/usr/share/gnome/help ]; then \ cd debian/liblrdf0-dev && LC_ALL=C fdupes -r1nq usr/share/gnome/help | while read s; do \ set -- $(echo $s | tr ' ' '\n' | sort); \ f=$1; shift; \ for d; do \ echo "symlinking duplicate Gnome help file $d to $f"; \ rm $d; ln -s /$f $d; \ done; \ done; \ fi dh_link -p liblrdf0-dev dh_md5sums -pliblrdf0-dev dh_builddeb -pliblrdf0-dev pkgstriptranslations: processing control file: ./debian/liblrdf0-dev/DEBIAN/control, package liblrdf0-dev, directory ./debian/liblrdf0-dev pkgstriptranslations: liblrdf0-dev does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball dpkg-deb: building package `liblrdf0-dev' in `../liblrdf0-dev_0.4.0-1.1_hppa.deb'. dh_gencontrol -pliblrdf0 # symlink identical documentation to depending packages [ -n "$CDBS_NO_DOC_SYMLINKING" ] || \ [ -h debian/liblrdf0/usr/share/doc ] || \ [ ! -d debian/liblrdf0/usr/share/doc ] || \ for dep in `perl -ne 'if (/^(Pre-)?Depends:/) {s/^\w+://; foreach (split /,/) { split; print($_[0], "\n"); } }' debian/liblrdf0/DEBIAN/control`; do \ if [ -d debian/$dep/usr/share/doc ]; then \ echo "Searching for duplicated docs in dependency $dep..."; \ rootdir=`pwd`; \ (cd debian/liblrdf0/usr/share/doc/liblrdf0; find -type f ! -name copyright | while read f; do \ thisfile="$rootdir/debian/liblrdf0/usr/share/doc/liblrdf0/$f"; \ depfile="$rootdir/debian/$dep/usr/share/doc/$dep/$f"; \ if [ -f $depfile -o -L $depfile ] && zcmp $thisfile $depfile >/dev/null; then \ echo " symlinking $f in liblrdf0 to file in $dep"; \ rm $thisfile; ln -s /usr/share/doc/$dep/$f $thisfile; \ fi; \ done ); \ fi; \ done # symlink identical Gnome help files within packages if [ -z "$CDBS_NO_GNOME_HELP_SYMLINKING" ] && [ -d debian/liblrdf0/usr/share/gnome/help ]; then \ cd debian/liblrdf0 && LC_ALL=C fdupes -r1nq usr/share/gnome/help | while read s; do \ set -- $(echo $s | tr ' ' '\n' | sort); \ f=$1; shift; \ for d; do \ echo "symlinking duplicate Gnome help file $d to $f"; \ rm $d; ln -s /$f $d; \ done; \ done; \ fi dh_link -p liblrdf0 dh_md5sums -pliblrdf0 dh_builddeb -pliblrdf0 pkgstriptranslations: processing control file: ./debian/liblrdf0-dev/DEBIAN/control, package liblrdf0-dev, directory ./debian/liblrdf0-dev pkgstriptranslations: liblrdf0-dev does not contain translations, skipping pkgstriptranslations: processing control file: ./debian/liblrdf0/DEBIAN/control, package liblrdf0, directory ./debian/liblrdf0 pkgstriptranslations: liblrdf0 does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball dpkg-deb: building package `liblrdf0' in `../liblrdf0_0.4.0-1.1_hppa.deb'. dpkg-genchanges -B -mUbuntu/hppa Build Daemon >../liblrdf_0.4.0-1.1_hppa.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20080522-0340 Publishing debug debs. chroot-autobuild/build/buildd/liblrdf0-dev_0.4.0-1.1_hppa.deb: new debian package, version 2.0. size 19762 bytes: control archive= 726 bytes. 612 bytes, 19 lines control 295 bytes, 5 lines md5sums Package: liblrdf0-dev Source: liblrdf Version: 0.4.0-1.1 Architecture: hppa Maintainer: Robert Jordens Installed-Size: 120 Depends: ladspa-sdk, liblrdf0 (= 0.4.0-1.1), libraptor1-dev Conflicts: liblrdf-dev Provides: liblrdf-dev Section: libdevel Priority: optional Description: liblrdf0 development files Liblrdf can read RDF/XML and N3 files and export N3 files. It also has a light taxonomic inference capablility. . It can also be used for general RDF manipulation. . This package holds static libraries and headers needed by developers who wish to use liblrdf0 in their programs. chroot-autobuild/build/buildd/liblrdf0_0.4.0-1.1_hppa.deb: new debian package, version 2.0. size 22152 bytes: control archive= 960 bytes. 503 bytes, 15 lines control 534 bytes, 8 lines md5sums 135 bytes, 7 lines * postinst #!/bin/sh 132 bytes, 7 lines * postrm #!/bin/sh 19 bytes, 1 lines shlibs Package: liblrdf0 Source: liblrdf Version: 0.4.0-1.1 Architecture: hppa Maintainer: Robert Jordens Installed-Size: 112 Depends: libc6 (>= 2.6.1-1), libraptor1 (>= 1.4.16) Suggests: liblrdf0-dev (= 0.4.0-1.1) Section: libs Priority: optional Description: a library to manipulate RDF files describing LADSPA plugins Liblrdf can read RDF/XML and N3 files and export N3 files. It also has a light taxonomic inference capablility. . It can also be used for general RDF manipulation. chroot-autobuild/build/buildd/liblrdf0-dev_0.4.0-1.1_hppa.deb: drwxr-xr-x root/root 0 2008-05-22 03:40:07 ./ drwxr-xr-x root/root 0 2008-05-22 03:40:10 ./usr/ drwxr-xr-x root/root 0 2008-05-22 03:40:02 ./usr/bin/ drwxr-xr-x root/root 0 2008-05-22 03:40:02 ./usr/sbin/ drwxr-xr-x root/root 0 2008-05-22 03:40:05 ./usr/share/ drwxr-xr-x root/root 0 2008-05-22 03:40:05 ./usr/share/doc/ drwxr-xr-x root/root 0 2008-05-22 03:40:29 ./usr/share/doc/liblrdf0-dev/ -rw-r--r-- root/root 1023 2008-05-22 03:38:46 ./usr/share/doc/liblrdf0-dev/copyright drwxr-xr-x root/root 0 2008-05-22 03:40:10 ./usr/include/ -rw-r--r-- root/root 6931 2008-05-22 03:40:04 ./usr/include/lrdf.h -rw-r--r-- root/root 1119 2008-05-22 03:40:04 ./usr/include/lrdf_types.h drwxr-xr-x root/root 0 2008-05-22 03:40:28 ./usr/lib/ -rw-r--r-- root/root 33714 2008-05-22 03:40:18 ./usr/lib/liblrdf.a drwxr-xr-x root/root 0 2008-05-22 03:40:10 ./usr/lib/pkgconfig/ -rw-r--r-- root/root 244 2008-05-22 03:40:04 ./usr/lib/pkgconfig/lrdf.pc lrwxrwxrwx root/root 0 2008-05-22 03:40:29 ./usr/share/doc/liblrdf0-dev/README -> ../liblrdf0/README lrwxrwxrwx root/root 0 2008-05-22 03:40:28 ./usr/share/doc/liblrdf0-dev/AUTHORS -> ../liblrdf0/AUTHORS lrwxrwxrwx root/root 0 2008-05-22 03:40:28 ./usr/share/doc/liblrdf0-dev/buildinfo.gz -> ../liblrdf0/buildinfo.gz lrwxrwxrwx root/root 0 2008-05-22 03:40:28 ./usr/share/doc/liblrdf0-dev/NEWS.gz -> ../liblrdf0/NEWS.gz lrwxrwxrwx root/root 0 2008-05-22 03:40:28 ./usr/share/doc/liblrdf0-dev/changelog.Debian.gz -> ../liblrdf0/changelog.Debian.gz lrwxrwxrwx root/root 0 2008-05-22 03:40:28 ./usr/lib/liblrdf.so -> liblrdf.so.0.0.0 chroot-autobuild/build/buildd/liblrdf0_0.4.0-1.1_hppa.deb: drwxr-xr-x root/root 0 2008-05-22 03:40:13 ./ drwxr-xr-x root/root 0 2008-05-22 03:40:16 ./usr/ drwxr-xr-x root/root 0 2008-05-22 03:40:17 ./usr/share/ drwxr-xr-x root/root 0 2008-05-22 03:40:11 ./usr/share/doc/ drwxr-xr-x root/root 0 2008-05-22 03:40:23 ./usr/share/doc/liblrdf0/ -rw-r--r-- root/root 244 2004-11-09 03:12:31 ./usr/share/doc/liblrdf0/README -rw-r--r-- root/root 72 2004-12-19 22:58:20 ./usr/share/doc/liblrdf0/AUTHORS -rw-r--r-- root/root 1023 2008-05-22 03:38:46 ./usr/share/doc/liblrdf0/copyright -rw-r--r-- root/root 2498 2008-05-22 03:40:18 ./usr/share/doc/liblrdf0/buildinfo.gz -rw-r--r-- root/root 37 2004-11-09 03:12:31 ./usr/share/doc/liblrdf0/NEWS.gz -rw-r--r-- root/root 1132 2008-05-22 03:38:46 ./usr/share/doc/liblrdf0/changelog.Debian.gz drwxr-xr-x root/root 0 2008-05-22 03:40:17 ./usr/share/ladspa/ drwxr-xr-x root/root 0 2008-05-22 03:40:17 ./usr/share/ladspa/rdf/ -rw-r--r-- root/root 7825 2008-05-22 03:40:04 ./usr/share/ladspa/rdf/ladspa.rdfs drwxr-xr-x root/root 0 2008-05-22 03:40:32 ./usr/lib/ -rw-r--r-- root/root 29336 2008-05-22 03:40:23 ./usr/lib/liblrdf.so.0.0.0 lrwxrwxrwx root/root 0 2008-05-22 03:40:32 ./usr/lib/liblrdf.so.0 -> liblrdf.so.0.0.0 liblrdf_0.4.0-1.1_hppa.changes: Format: 1.7 Date: Sat, 03 May 2008 01:23:09 -0400 Source: liblrdf Binary: liblrdf0-dev liblrdf0 Architecture: hppa Version: 0.4.0-1.1 Distribution: intrepid Urgency: low Maintainer: Ubuntu/hppa Build Daemon Changed-By: Eric Dorland Description: liblrdf0 - a library to manipulate RDF files describing LADSPA plugins liblrdf0-dev - liblrdf0 development files Closes: 473327 Changes: liblrdf (0.4.0-1.1) unstable; urgency=low . * NMU. * debian/control: Stop needlessly build depending on automake1.8. (Closes: #473327) Files: a7cc4bec84fcf617b493545ce1dcea85 19762 libdevel optional liblrdf0-dev_0.4.0-1.1_hppa.deb b1b00bc9c11f9677f8aa413e5fb3752d 22152 libs optional liblrdf0_0.4.0-1.1_hppa.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/liblrdf-0.4.0 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --root=/home/buildd/build-605143-1558123/chroot-autobuild --purge groff-base libglib2.0-0 m4 libsasl2-2 gettext file zlib1g-dev libhtml-parser-perl intltool libtasn1-3 libldap2-dev libwww-perl liburi-perl comerr-dev libhtml-tree-perl autotools-dev po-debconf libxml-parser-perl libopencdk10 libkrb5-dev libhtml-tagset-perl libxml2 liblzo2-2 pkg-config man-db libssl0.9.8 libkadm55 intltool-debian ladspa-sdk libldap-2.4-2 libcurl3 libxml2-dev automake1.7 cdbs libgpg-error0 html2text libgcrypt11 gettext-base debhelper libraptor1-dev dh-buildinfo libidn11 libkeyutils1 libcurl4-openssl-dev libxslt1.1 libmagic1 libraptor1 libgnutls13 libsasl2-modules libexpat1 libssl-dev bsdmainutils libidn11-dev fdupes libpcre3 libxslt1-dev autoconf libkrb53 (Reading database ... 13613 files and directories currently installed.) Removing ladspa-sdk ... Removing cdbs ... Removing libraptor1-dev ... Removing dh-buildinfo ... Removing libcurl4-openssl-dev ... Removing libraptor1 ... Purging configuration files for libraptor1 ... Removing libssl-dev ... Removing libidn11-dev ... Removing fdupes ... Removing libxslt1-dev ... Removing intltool ... Removing libldap2-dev ... Removing libxml-parser-perl ... Removing libkrb5-dev ... Removing pkg-config ... Removing libkadm55 ... Purging configuration files for libkadm55 ... Removing libcurl3 ... Purging configuration files for libcurl3 ... Removing libxml2-dev ... Removing automake1.7 ... Removing debhelper ... Removing libidn11 ... Purging configuration files for libidn11 ... Removing libxslt1.1 ... Purging configuration files for libxslt1.1 ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing autoconf ... Purging configuration files for autoconf ... Removing libkrb53 ... Purging configuration files for libkrb53 ... Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing m4 ... Removing file ... Purging configuration files for file ... Removing zlib1g-dev ... Removing libwww-perl ... Removing comerr-dev ... Removing libhtml-tree-perl ... Removing autotools-dev ... Removing po-debconf ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing man-db ... Purging configuration files for man-db ... Removing catpages as well as /var/cache/man hierarchy. Removing intltool-debian ... Removing libldap-2.4-2 ... Purging configuration files for libldap-2.4-2 ... Removing html2text ... Purging configuration files for html2text ... Removing libkeyutils1 ... Purging configuration files for libkeyutils1 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libgnutls13 ... Purging configuration files for libgnutls13 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Removing groff-base ... Purging configuration files for groff-base ... Removing gettext ... Removing libhtml-parser-perl ... Removing libtasn1-3 ... Purging configuration files for libtasn1-3 ... Removing liburi-perl ... Removing libopencdk10 ... Purging configuration files for libopencdk10 ... Removing libhtml-tagset-perl ... Removing liblzo2-2 ... Purging configuration files for liblzo2-2 ... Removing libgcrypt11 ... Purging configuration files for libgcrypt11 ... Removing gettext-base ... Removing libgpg-error0 ... Purging configuration files for libgpg-error0 ... Removing libsasl2-2 ... Purging configuration files for libsasl2-2 ... Removing libsasl2-modules ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... ****************************************************************************** Finished at 20080522-0341 Build needed 00:01:50, 3360k disk space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '605143-1558123'] Scanning for processes to kill in build 605143-1558123... Scanning for processes to kill in build /home/buildd/build-605143-1558123/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '605143-1558123'] Unmounting chroot for build 605143-1558123... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '605143-1558123'] Removing build 605143-1558123