RUN: /usr/share/launchpad-buildd/slavebin/slave-prep ['slave-prep'] Forking launchpad-buildd slave process... Kernel version: Linux sagari 3.2.0-97-powerpc64-smp #137-Ubuntu SMP Thu Dec 17 15:33:13 UTC 2015 ppc64 Buildd toolchain package versions: launchpad-buildd_137 python-lpbuildd_137 sbuild_0.65.2-1ubuntu2~ubuntu12.04.1~ppa7 bzr_2.5.1-0ubuntu2 dpkg-dev_1.16.1.2ubuntu7.7 python-debian_0.1.27ubuntu1~ubuntu12.04.1~ppa2. Syncing the system clock with the buildd NTP service... 7 Feb 23:26:03 ntpdate[9133]: adjust time server 10.211.37.1 offset 0.000071 sec RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', 'PACKAGEBUILD-8981103', '/home/buildd/filecache-default/59b2027bd898a08257bdf6a14dda09a63b60b4fb'] Unpacking chroot for build PACKAGEBUILD-8981103 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', 'PACKAGEBUILD-8981103'] Mounting chroot for build PACKAGEBUILD-8981103 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', 'PACKAGEBUILD-8981103', 'deb http://ftpmaster.internal/ubuntu xenial main universe', 'deb http://ftpmaster.internal/ubuntu xenial-security main universe', 'deb http://ftpmaster.internal/ubuntu xenial-updates main universe', 'deb http://ftpmaster.internal/ubuntu xenial-proposed main universe'] Overriding sources.list in build-PACKAGEBUILD-8981103 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', 'PACKAGEBUILD-8981103', 'powerpc'] Updating debian chroot for build PACKAGEBUILD-8981103 Get:1 http://ftpmaster.internal xenial InRelease [237 kB] Get:2 http://ftpmaster.internal xenial-security InRelease [82.2 kB] Get:3 http://ftpmaster.internal xenial-updates InRelease [82.2 kB] Get:4 http://ftpmaster.internal xenial-proposed InRelease [237 kB] Get:5 http://ftpmaster.internal xenial/main powerpc Packages [1440 kB] Get:6 http://ftpmaster.internal xenial/universe powerpc Packages [7046 kB] Get:7 http://ftpmaster.internal xenial/main Translation-en [853 kB] Get:8 http://ftpmaster.internal xenial/universe Translation-en [4838 kB] Get:9 http://ftpmaster.internal xenial-security/main powerpc Packages [28 B] Get:10 http://ftpmaster.internal xenial-security/universe powerpc Packages [28 B] Get:11 http://ftpmaster.internal xenial-security/main Translation-en [28 B] Get:12 http://ftpmaster.internal xenial-security/universe Translation-en [28 B] Get:13 http://ftpmaster.internal xenial-updates/main powerpc Packages [28 B] Get:14 http://ftpmaster.internal xenial-updates/universe powerpc Packages [28 B] Get:15 http://ftpmaster.internal xenial-updates/main Translation-en [28 B] Get:16 http://ftpmaster.internal xenial-updates/universe Translation-en [28 B] Get:17 http://ftpmaster.internal xenial-proposed/main powerpc Packages [74.9 kB] Get:18 http://ftpmaster.internal xenial-proposed/universe powerpc Packages [491 kB] Get:19 http://ftpmaster.internal xenial-proposed/main Translation-en [44.7 kB] Get:20 http://ftpmaster.internal xenial-proposed/universe Translation-en [273 kB] Fetched 15.7 MB in 6s (2567 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libapt-pkg4.16 libisl13 libprocps3 udev Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: perl-modules* The following NEW packages will be installed: init-system-helpers libapt-pkg5.0 libisl15 libperl5.22 libprocps4 perl-modules-5.22 The following packages will be upgraded: advancecomp apt apt-transport-https base-files base-passwd binutils bsdutils ca-certificates cpp cpp-5 debconf debianutils diffutils dmsetup dpkg dpkg-dev e2fslibs e2fsprogs findutils g++ g++-5 gcc gcc-5 gcc-5-base gnupg gpgv hostname init initscripts libacl1 libapparmor1 libasan2 libasn1-8-heimdal libatomic1 libaudit-common libaudit1 libblkid1 libc-bin libc-dev-bin libc6 libc6-dev libcap2 libcap2-bin libcc1-0 libcomerr2 libcurl3-gnutls libdbus-1-3 libdebconfclient0 libdevmapper1.02.1 libdpkg-perl libfdisk1 libffi6 libgcc-5-dev libgcc1 libgcrypt20 libgmp10 libgnutls-deb0-28 libgomp1 libgpg-error0 libgssapi-krb5-2 libgssapi3-heimdal libhcrypto4-heimdal libheimbase1-heimdal libheimntlm0-heimdal libhogweed4 libhx509-5-heimdal libidn11 libk5crypto3 libkeyutils1 libkrb5-26-heimdal libkrb5-3 libkrb5support0 libldap-2.4-2 libmount1 libmpfr4 libncurses5 libncursesw5 libnettle6 libnih-dbus1 libnih1 libp11-kit0 libpcre3 libpng12-0 libreadline6 libroken18-heimdal librtmp1 libseccomp2 libselinux1 libsemanage-common libsemanage1 libsepol1 libsmartcols1 libsqlite3-0 libss2 libssl1.0.0 libstdc++-5-dev libstdc++6 libsystemd0 libtasn1-6 libtinfo5 libubsan0 libudev1 libusb-0.1-4 libuuid1 libwind0-heimdal linux-libc-dev login lsb-base make mount multiarch-support ncurses-base ncurses-bin openssl passwd perl perl-base pkg-create-dbgsym pkgbinarymangler procps readline-common systemd systemd-sysv sysv-rc sysvinit-utils tar tzdata udev util-linux 129 upgraded, 6 newly installed, 1 to remove and 0 not upgraded. Need to get 124 MB of archives. After this operation, 269 MB of additional disk space will be used. Get:1 http://ftpmaster.internal/ubuntu/ xenial/main base-files powerpc 9.4ubuntu3 [62.2 kB] Get:2 http://ftpmaster.internal/ubuntu/ xenial-proposed/main bsdutils powerpc 1:2.27.1-1ubuntu4 [51.0 kB] Get:3 http://ftpmaster.internal/ubuntu/ xenial/main debianutils powerpc 4.7 [85.1 kB] Get:4 http://ftpmaster.internal/ubuntu/ xenial/main diffutils powerpc 1:3.3-3 [148 kB] Get:5 http://ftpmaster.internal/ubuntu/ xenial/main dpkg powerpc 1.18.4ubuntu1 [2058 kB] Get:6 http://ftpmaster.internal/ubuntu/ xenial/main libc6-dev powerpc 2.21-0ubuntu5 [1793 kB] Get:7 http://ftpmaster.internal/ubuntu/ xenial/main libc-dev-bin powerpc 2.21-0ubuntu5 [61.5 kB] Get:8 http://ftpmaster.internal/ubuntu/ xenial-proposed/main linux-libc-dev powerpc 4.4.0-4.19 [818 kB] Get:9 http://ftpmaster.internal/ubuntu/ xenial/main libcap2 powerpc 1:2.24-12 [12.5 kB] Get:10 http://ftpmaster.internal/ubuntu/ xenial/main libc-bin powerpc 2.21-0ubuntu5 [1272 kB] Get:11 http://ftpmaster.internal/ubuntu/ xenial/main libgomp1 powerpc 5.3.1-8ubuntu2 [51.0 kB] Get:12 http://ftpmaster.internal/ubuntu/ xenial/main libatomic1 powerpc 5.3.1-8ubuntu2 [7196 B] Get:13 http://ftpmaster.internal/ubuntu/ xenial/main libasan2 powerpc 5.3.1-8ubuntu2 [232 kB] Get:14 http://ftpmaster.internal/ubuntu/ xenial/main gcc-5-base powerpc 5.3.1-8ubuntu2 [16.6 kB] Get:15 http://ftpmaster.internal/ubuntu/ xenial/main libgcc1 powerpc 1:5.3.1-8ubuntu2 [27.1 kB] Get:16 http://ftpmaster.internal/ubuntu/ xenial/main libubsan0 powerpc 5.3.1-8ubuntu2 [95.8 kB] Get:17 http://ftpmaster.internal/ubuntu/ xenial/main libisl15 powerpc 0.16.1-1 [428 kB] Get:18 http://ftpmaster.internal/ubuntu/ xenial/main cpp-5 powerpc 5.3.1-8ubuntu2 [26.5 MB] Get:19 http://ftpmaster.internal/ubuntu/ xenial/main libcc1-0 powerpc 5.3.1-8ubuntu2 [40.7 kB] Get:20 http://ftpmaster.internal/ubuntu/ xenial-proposed/main binutils powerpc 2.26-3ubuntu1 [2224 kB] Get:21 http://ftpmaster.internal/ubuntu/ xenial/main g++-5 powerpc 5.3.1-8ubuntu2 [28.6 MB] Get:22 http://ftpmaster.internal/ubuntu/ xenial/main gcc-5 powerpc 5.3.1-8ubuntu2 [26.7 MB] Get:23 http://ftpmaster.internal/ubuntu/ xenial/main libgcc-5-dev powerpc 5.3.1-8ubuntu2 [500 kB] Get:24 http://ftpmaster.internal/ubuntu/ xenial/main libstdc++-5-dev powerpc 5.3.1-8ubuntu2 [1381 kB] Get:25 http://ftpmaster.internal/ubuntu/ xenial/main libstdc++6 powerpc 5.3.1-8ubuntu2 [402 kB] Get:26 http://ftpmaster.internal/ubuntu/ xenial/main libgmp10 powerpc 2:6.1.0+dfsg-2 [199 kB] Get:27 http://ftpmaster.internal/ubuntu/ xenial/main libmpfr4 powerpc 3.1.3-2 [175 kB] Get:28 http://ftpmaster.internal/ubuntu/ xenial/main libc6 powerpc 2.21-0ubuntu5 [5095 kB] Get:29 http://ftpmaster.internal/ubuntu/ xenial/main e2fslibs powerpc 1.42.13-1ubuntu1 [187 kB] Get:30 http://ftpmaster.internal/ubuntu/ xenial/main e2fsprogs powerpc 1.42.13-1ubuntu1 [753 kB] Get:31 http://ftpmaster.internal/ubuntu/ xenial/main findutils powerpc 4.6.0-2 [273 kB] Get:32 http://ftpmaster.internal/ubuntu/ xenial/main hostname powerpc 3.16ubuntu2 [11.3 kB] Get:33 http://ftpmaster.internal/ubuntu/ xenial-proposed/main init-system-helpers all 1.28ubuntu1 [31.2 kB] Get:34 http://ftpmaster.internal/ubuntu/ xenial/main sysvinit-utils powerpc 2.88dsf-59.3ubuntu2 [21.5 kB] Get:35 http://ftpmaster.internal/ubuntu/ xenial/main perl-modules-5.22 all 5.22.1-5 [2639 kB] Get:36 http://ftpmaster.internal/ubuntu/ xenial/main libperl5.22 powerpc 5.22.1-5 [2723 kB] Get:37 http://ftpmaster.internal/ubuntu/ xenial/main perl powerpc 5.22.1-5 [237 kB] Get:38 http://ftpmaster.internal/ubuntu/ xenial/main perl-base powerpc 5.22.1-5 [1168 kB] Get:39 http://ftpmaster.internal/ubuntu/ xenial-proposed/main init powerpc 1.28ubuntu1 [4394 B] Get:40 http://ftpmaster.internal/ubuntu/ xenial/main login powerpc 1:4.2-3.1ubuntu2 [302 kB] Get:41 http://ftpmaster.internal/ubuntu/ xenial-proposed/main libsmartcols1 powerpc 2.27.1-1ubuntu4 [57.5 kB] Get:42 http://ftpmaster.internal/ubuntu/ xenial/main libaudit-common all 1:2.4.5-1ubuntu2 [3884 B] Get:43 http://ftpmaster.internal/ubuntu/ xenial/main libaudit1 powerpc 1:2.4.5-1ubuntu2 [34.6 kB] Get:44 http://ftpmaster.internal/ubuntu/ xenial/main libpcre3 powerpc 2:8.38-1ubuntu1 [197 kB] Get:45 http://ftpmaster.internal/ubuntu/ xenial/main libselinux1 powerpc 2.4-3build1 [50.1 kB] Get:46 http://ftpmaster.internal/ubuntu/ xenial/main libsepol1 powerpc 2.4-2 [155 kB] Get:47 http://ftpmaster.internal/ubuntu/ xenial-proposed/main libsemanage-common all 2.4-3build1 [6594 B] Get:48 http://ftpmaster.internal/ubuntu/ xenial-proposed/main libsemanage1 powerpc 2.4-3build1 [67.8 kB] Get:49 http://ftpmaster.internal/ubuntu/ xenial-proposed/main libfdisk1 powerpc 2.27.1-1ubuntu4 [126 kB] Get:50 http://ftpmaster.internal/ubuntu/ xenial/main libtinfo5 powerpc 6.0+20151024-2ubuntu2 [69.7 kB] Get:51 http://ftpmaster.internal/ubuntu/ xenial/main libncurses5 powerpc 6.0+20151024-2ubuntu2 [80.9 kB] Get:52 http://ftpmaster.internal/ubuntu/ xenial/main libncursesw5 powerpc 6.0+20151024-2ubuntu2 [101 kB] Get:53 http://ftpmaster.internal/ubuntu/ xenial/main sysv-rc all 2.88dsf-59.3ubuntu2 [18.2 kB] Get:54 http://ftpmaster.internal/ubuntu/ xenial/main libsystemd0 powerpc 228-5ubuntu3 [184 kB] Get:55 http://ftpmaster.internal/ubuntu/ xenial-proposed/main util-linux powerpc 2.27.1-1ubuntu4 [781 kB] Get:56 http://ftpmaster.internal/ubuntu/ xenial/main libudev1 powerpc 228-5ubuntu3 [53.9 kB] Get:57 http://ftpmaster.internal/ubuntu/ xenial/main udev powerpc 228-5ubuntu3 [945 kB] Get:58 http://ftpmaster.internal/ubuntu/ xenial/main systemd powerpc 228-5ubuntu3 [3248 kB] Get:59 http://ftpmaster.internal/ubuntu/ xenial/main initscripts powerpc 2.88dsf-59.3ubuntu2 [24.6 kB] Get:60 http://ftpmaster.internal/ubuntu/ xenial-proposed/main libacl1 powerpc 2.2.52-3 [15.3 kB] Get:61 http://ftpmaster.internal/ubuntu/ xenial/main libprocps4 powerpc 2:3.3.10-4ubuntu2 [30.1 kB] Get:62 http://ftpmaster.internal/ubuntu/ xenial/main debconf all 1.5.58ubuntu1 [136 kB] Get:63 http://ftpmaster.internal/ubuntu/ xenial/main procps powerpc 2:3.3.10-4ubuntu2 [212 kB] Get:64 http://ftpmaster.internal/ubuntu/ xenial/main libapparmor1 powerpc 2.10-0ubuntu12 [26.3 kB] Get:65 http://ftpmaster.internal/ubuntu/ xenial-proposed/main libmount1 powerpc 2.27.1-1ubuntu4 [101 kB] Get:66 http://ftpmaster.internal/ubuntu/ xenial/main libseccomp2 powerpc 2.2.3-2ubuntu3 [35.3 kB] Get:67 http://ftpmaster.internal/ubuntu/ xenial/main libcap2-bin powerpc 1:2.24-12 [19.7 kB] Get:68 http://ftpmaster.internal/ubuntu/ xenial/main lsb-base all 9.20160110 [13.5 kB] Get:69 http://ftpmaster.internal/ubuntu/ xenial/main passwd powerpc 1:4.2-3.1ubuntu2 [731 kB] Get:70 http://ftpmaster.internal/ubuntu/ xenial-proposed/main libuuid1 powerpc 2.27.1-1ubuntu4 [15.9 kB] Get:71 http://ftpmaster.internal/ubuntu/ xenial-proposed/main libblkid1 powerpc 2.27.1-1ubuntu4 [99.4 kB] Get:72 http://ftpmaster.internal/ubuntu/ xenial/main tzdata all 2016a-1 [168 kB] Get:73 http://ftpmaster.internal/ubuntu/ xenial-proposed/main mount powerpc 2.27.1-1ubuntu4 [115 kB] Get:74 http://ftpmaster.internal/ubuntu/ xenial/main ncurses-bin powerpc 6.0+20151024-2ubuntu2 [129 kB] Get:75 http://ftpmaster.internal/ubuntu/ xenial/main tar powerpc 1.28-2.1 [192 kB] Get:76 http://ftpmaster.internal/ubuntu/ xenial/main libapt-pkg5.0 powerpc 1.1.10 [658 kB] Get:77 http://ftpmaster.internal/ubuntu/ xenial/main apt powerpc 1.1.10 [955 kB] Get:78 http://ftpmaster.internal/ubuntu/ xenial/main gpgv powerpc 1.4.20-1ubuntu1 [146 kB] Get:79 http://ftpmaster.internal/ubuntu/ xenial/main readline-common all 6.3-8ubuntu2 [51.4 kB] Get:80 http://ftpmaster.internal/ubuntu/ xenial/main libreadline6 powerpc 6.3-8ubuntu2 [97.7 kB] Get:81 http://ftpmaster.internal/ubuntu/ xenial/main libusb-0.1-4 powerpc 2:0.1.12-28 [15.6 kB] Get:82 http://ftpmaster.internal/ubuntu/ xenial/main gnupg powerpc 1.4.20-1ubuntu1 [578 kB] Get:83 http://ftpmaster.internal/ubuntu/ xenial/main libdebconfclient0 powerpc 0.198ubuntu1 [6314 B] Get:84 http://ftpmaster.internal/ubuntu/ xenial/main base-passwd powerpc 3.5.39 [51.1 kB] Get:85 http://ftpmaster.internal/ubuntu/ xenial/main ncurses-base all 6.0+20151024-2ubuntu2 [17.2 kB] Get:86 http://ftpmaster.internal/ubuntu/ xenial/main systemd-sysv powerpc 228-5ubuntu3 [16.7 kB] Get:87 http://ftpmaster.internal/ubuntu/ xenial/main libdbus-1-3 powerpc 1.10.6-1ubuntu1 [143 kB] Get:88 http://ftpmaster.internal/ubuntu/ xenial/main libnih-dbus1 powerpc 1.0.3-4.3ubuntu1 [13.1 kB] Get:89 http://ftpmaster.internal/ubuntu/ xenial/main libnih1 powerpc 1.0.3-4.3ubuntu1 [43.8 kB] Get:90 http://ftpmaster.internal/ubuntu/ xenial/main libcomerr2 powerpc 1.42.13-1ubuntu1 [65.5 kB] Get:91 http://ftpmaster.internal/ubuntu/ xenial/main libdevmapper1.02.1 powerpc 2:1.02.110-1ubuntu4 [120 kB] Get:92 http://ftpmaster.internal/ubuntu/ xenial/main libgpg-error0 powerpc 1.21-1 [33.4 kB] Get:93 http://ftpmaster.internal/ubuntu/ xenial/main libgcrypt20 powerpc 1.6.4-5 [306 kB] Get:94 http://ftpmaster.internal/ubuntu/ xenial/main libss2 powerpc 1.42.13-1ubuntu1 [69.6 kB] Get:95 http://ftpmaster.internal/ubuntu/ xenial/main multiarch-support powerpc 2.21-0ubuntu5 [7182 B] Get:96 http://ftpmaster.internal/ubuntu/ xenial/main libffi6 powerpc 3.2.1-4 [17.0 kB] Get:97 http://ftpmaster.internal/ubuntu/ xenial/main libhogweed4 powerpc 3.2-1 [130 kB] Get:98 http://ftpmaster.internal/ubuntu/ xenial/main libnettle6 powerpc 3.2-1 [114 kB] Get:99 http://ftpmaster.internal/ubuntu/ xenial/main libp11-kit0 powerpc 0.23.2-3 [84.8 kB] Get:100 http://ftpmaster.internal/ubuntu/ xenial/main libtasn1-6 powerpc 4.7-3 [39.4 kB] Get:101 http://ftpmaster.internal/ubuntu/ xenial/main libgnutls-deb0-28 powerpc 3.3.20-1ubuntu1 [415 kB] Get:102 http://ftpmaster.internal/ubuntu/ xenial/main libpng12-0 powerpc 1.2.54-1ubuntu1 [110 kB] Get:103 http://ftpmaster.internal/ubuntu/ xenial/main libsqlite3-0 powerpc 3.10.2-1 [348 kB] Get:104 http://ftpmaster.internal/ubuntu/ xenial/main libssl1.0.0 powerpc 1.0.2f-2ubuntu1 [718 kB] Get:105 http://ftpmaster.internal/ubuntu/ xenial/main libgssapi-krb5-2 powerpc 1.13.2+dfsg-4 [102 kB] Get:106 http://ftpmaster.internal/ubuntu/ xenial/main libkrb5-3 powerpc 1.13.2+dfsg-4 [239 kB] Get:107 http://ftpmaster.internal/ubuntu/ xenial/main libkrb5support0 powerpc 1.13.2+dfsg-4 [29.0 kB] Get:108 http://ftpmaster.internal/ubuntu/ xenial/main libk5crypto3 powerpc 1.13.2+dfsg-4 [81.5 kB] Get:109 http://ftpmaster.internal/ubuntu/ xenial/main libkeyutils1 powerpc 1.5.9-8ubuntu1 [9890 B] Get:110 http://ftpmaster.internal/ubuntu/ xenial/main libidn11 powerpc 1.32-3ubuntu1 [42.8 kB] Get:111 http://ftpmaster.internal/ubuntu/ xenial/main libroken18-heimdal powerpc 1.7~git20150920+dfsg-4ubuntu1 [38.7 kB] Get:112 http://ftpmaster.internal/ubuntu/ xenial/main libasn1-8-heimdal powerpc 1.7~git20150920+dfsg-4ubuntu1 [129 kB] Get:113 http://ftpmaster.internal/ubuntu/ xenial/main libhcrypto4-heimdal powerpc 1.7~git20150920+dfsg-4ubuntu1 [80.2 kB] Get:114 http://ftpmaster.internal/ubuntu/ xenial/main libheimbase1-heimdal powerpc 1.7~git20150920+dfsg-4ubuntu1 [26.4 kB] Get:115 http://ftpmaster.internal/ubuntu/ xenial/main libwind0-heimdal powerpc 1.7~git20150920+dfsg-4ubuntu1 [47.1 kB] Get:116 http://ftpmaster.internal/ubuntu/ xenial/main libhx509-5-heimdal powerpc 1.7~git20150920+dfsg-4ubuntu1 [91.9 kB] Get:117 http://ftpmaster.internal/ubuntu/ xenial/main libkrb5-26-heimdal powerpc 1.7~git20150920+dfsg-4ubuntu1 [174 kB] Get:118 http://ftpmaster.internal/ubuntu/ xenial/main libheimntlm0-heimdal powerpc 1.7~git20150920+dfsg-4ubuntu1 [14.8 kB] Get:119 http://ftpmaster.internal/ubuntu/ xenial/main libgssapi3-heimdal powerpc 1.7~git20150920+dfsg-4ubuntu1 [82.2 kB] Get:120 http://ftpmaster.internal/ubuntu/ xenial/main libldap-2.4-2 powerpc 2.4.42+dfsg-2ubuntu1 [141 kB] Get:121 http://ftpmaster.internal/ubuntu/ xenial/main librtmp1 powerpc 2.4+20151223.gitfa8646d-1 [50.0 kB] Get:122 http://ftpmaster.internal/ubuntu/ xenial/main libcurl3-gnutls powerpc 7.47.0-1ubuntu1 [166 kB] Get:123 http://ftpmaster.internal/ubuntu/ xenial/main apt-transport-https powerpc 1.1.10 [25.1 kB] Get:124 http://ftpmaster.internal/ubuntu/ xenial/main openssl powerpc 1.0.2f-2ubuntu1 [465 kB] Get:125 http://ftpmaster.internal/ubuntu/ xenial-proposed/main ca-certificates all 20160104 [191 kB] Get:126 http://ftpmaster.internal/ubuntu/ xenial/main advancecomp powerpc 1.20-1 [143 kB] Get:127 http://ftpmaster.internal/ubuntu/ xenial/main cpp powerpc 4:5.2.1-16ubuntu2 [27.6 kB] Get:128 http://ftpmaster.internal/ubuntu/ xenial/main dmsetup powerpc 2:1.02.110-1ubuntu4 [52.4 kB] Get:129 http://ftpmaster.internal/ubuntu/ xenial/main dpkg-dev all 1.18.4ubuntu1 [584 kB] Get:130 http://ftpmaster.internal/ubuntu/ xenial/main libdpkg-perl all 1.18.4ubuntu1 [195 kB] Get:131 http://ftpmaster.internal/ubuntu/ xenial/main make powerpc 4.1-5 [141 kB] Get:132 http://ftpmaster.internal/ubuntu/ xenial/main gcc powerpc 4:5.2.1-16ubuntu2 [5228 B] Get:133 http://ftpmaster.internal/ubuntu/ xenial/main g++ powerpc 4:5.2.1-16ubuntu2 [1512 B] Get:134 http://ftpmaster.internal/ubuntu/ xenial/main pkg-create-dbgsym all 0.70 [9046 B] Get:135 http://ftpmaster.internal/ubuntu/ xenial/main pkgbinarymangler all 129 [43.0 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 124 MB in 6s (20.3 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11511 files and directories currently installed.) Preparing to unpack .../base-files_9.4ubuntu3_powerpc.deb ... Unpacking base-files (9.4ubuntu3) over (7.2ubuntu11) ... Setting up base-files (9.4ubuntu3) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Installing new version of config file /etc/lsb-release ... Updating /etc/profile to current default. Updating /etc/nsswitch.conf to current default. Updating /root/.profile to current default. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11513 files and directories currently installed.) Preparing to unpack .../bsdutils_1%3a2.27.1-1ubuntu4_powerpc.deb ... Unpacking bsdutils (1:2.27.1-1ubuntu4) over (1:2.26.2-6ubuntu3) ... Setting up bsdutils (1:2.27.1-1ubuntu4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11513 files and directories currently installed.) Preparing to unpack .../debianutils_4.7_powerpc.deb ... Unpacking debianutils (4.7) over (4.5.1) ... Setting up debianutils (4.7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11513 files and directories currently installed.) Preparing to unpack .../diffutils_1%3a3.3-3_powerpc.deb ... Unpacking diffutils (1:3.3-3) over (1:3.3-1) ... Setting up diffutils (1:3.3-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11513 files and directories currently installed.) Preparing to unpack .../dpkg_1.18.4ubuntu1_powerpc.deb ... Unpacking dpkg (1.18.4ubuntu1) over (1.18.2ubuntu5) ... Setting up dpkg (1.18.4ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11513 files and directories currently installed.) Preparing to unpack .../libc6-dev_2.21-0ubuntu5_powerpc.deb ... Unpacking libc6-dev:powerpc (2.21-0ubuntu5) over (2.21-0ubuntu4) ... Preparing to unpack .../libc-dev-bin_2.21-0ubuntu5_powerpc.deb ... Unpacking libc-dev-bin (2.21-0ubuntu5) over (2.21-0ubuntu4) ... Preparing to unpack .../linux-libc-dev_4.4.0-4.19_powerpc.deb ... Unpacking linux-libc-dev:powerpc (4.4.0-4.19) over (4.2.0-16.19) ... Preparing to unpack .../libcap2_1%3a2.24-12_powerpc.deb ... Unpacking libcap2:powerpc (1:2.24-12) over (1:2.24-9) ... Setting up libcap2:powerpc (1:2.24-12) ... Processing triggers for libc-bin (2.21-0ubuntu4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11523 files and directories currently installed.) Preparing to unpack .../libc-bin_2.21-0ubuntu5_powerpc.deb ... Unpacking libc-bin (2.21-0ubuntu5) over (2.21-0ubuntu4) ... Setting up libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11523 files and directories currently installed.) Preparing to unpack .../libgomp1_5.3.1-8ubuntu2_powerpc.deb ... Unpacking libgomp1:powerpc (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Preparing to unpack .../libatomic1_5.3.1-8ubuntu2_powerpc.deb ... Unpacking libatomic1:powerpc (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Preparing to unpack .../libasan2_5.3.1-8ubuntu2_powerpc.deb ... Unpacking libasan2:powerpc (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Preparing to unpack .../gcc-5-base_5.3.1-8ubuntu2_powerpc.deb ... Unpacking gcc-5-base:powerpc (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up gcc-5-base:powerpc (5.3.1-8ubuntu2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11523 files and directories currently installed.) Preparing to unpack .../libgcc1_1%3a5.3.1-8ubuntu2_powerpc.deb ... Unpacking libgcc1:powerpc (1:5.3.1-8ubuntu2) over (1:5.2.1-22ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libgcc1:powerpc (1:5.3.1-8ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11523 files and directories currently installed.) Preparing to unpack .../libubsan0_5.3.1-8ubuntu2_powerpc.deb ... Unpacking libubsan0:powerpc (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Selecting previously unselected package libisl15:powerpc. Preparing to unpack .../libisl15_0.16.1-1_powerpc.deb ... Unpacking libisl15:powerpc (0.16.1-1) ... Preparing to unpack .../cpp-5_5.3.1-8ubuntu2_powerpc.deb ... Unpacking cpp-5 (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Preparing to unpack .../libcc1-0_5.3.1-8ubuntu2_powerpc.deb ... Unpacking libcc1-0:powerpc (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Preparing to unpack .../binutils_2.26-3ubuntu1_powerpc.deb ... Unpacking binutils (2.26-3ubuntu1) over (2.25.1-6ubuntu1) ... Preparing to unpack .../g++-5_5.3.1-8ubuntu2_powerpc.deb ... Unpacking g++-5 (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Preparing to unpack .../gcc-5_5.3.1-8ubuntu2_powerpc.deb ... Unpacking gcc-5 (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Preparing to unpack .../libgcc-5-dev_5.3.1-8ubuntu2_powerpc.deb ... Unpacking libgcc-5-dev:powerpc (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Preparing to unpack .../libstdc++-5-dev_5.3.1-8ubuntu2_powerpc.deb ... Unpacking libstdc++-5-dev:powerpc (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Preparing to unpack .../libstdc++6_5.3.1-8ubuntu2_powerpc.deb ... Unpacking libstdc++6:powerpc (5.3.1-8ubuntu2) over (5.2.1-22ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libstdc++6:powerpc (5.3.1-8ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11495 files and directories currently installed.) Preparing to unpack .../libgmp10_2%3a6.1.0+dfsg-2_powerpc.deb ... Unpacking libgmp10:powerpc (2:6.1.0+dfsg-2) over (2:6.0.0+dfsg-7) ... Preparing to unpack .../libmpfr4_3.1.3-2_powerpc.deb ... Unpacking libmpfr4:powerpc (3.1.3-2) over (3.1.3-1) ... Preparing to unpack .../libc6_2.21-0ubuntu5_powerpc.deb ... Unpacking libc6:powerpc (2.21-0ubuntu5) over (2.21-0ubuntu4) ... Setting up libc6:powerpc (2.21-0ubuntu5) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11495 files and directories currently installed.) Preparing to unpack .../e2fslibs_1.42.13-1ubuntu1_powerpc.deb ... Unpacking e2fslibs:powerpc (1.42.13-1ubuntu1) over (1.42.12-1ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up e2fslibs:powerpc (1.42.13-1ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11495 files and directories currently installed.) Preparing to unpack .../e2fsprogs_1.42.13-1ubuntu1_powerpc.deb ... Unpacking e2fsprogs (1.42.13-1ubuntu1) over (1.42.12-1ubuntu2) ... Setting up e2fsprogs (1.42.13-1ubuntu1) ... Installing new version of config file /etc/mke2fs.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11496 files and directories currently installed.) Preparing to unpack .../findutils_4.6.0-2_powerpc.deb ... Unpacking findutils (4.6.0-2) over (4.4.2-9build1) ... Setting up findutils (4.6.0-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11497 files and directories currently installed.) Preparing to unpack .../hostname_3.16ubuntu2_powerpc.deb ... Unpacking hostname (3.16ubuntu2) over (3.15ubuntu2) ... Setting up hostname (3.16ubuntu2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11497 files and directories currently installed.) Preparing to unpack .../sysvinit-utils_2.88dsf-59.3ubuntu2_powerpc.deb ... Unpacking sysvinit-utils (2.88dsf-59.3ubuntu2) over (2.88dsf-59.2ubuntu2) ... Selecting previously unselected package init-system-helpers. Preparing to unpack .../init-system-helpers_1.28ubuntu1_all.deb ... Unpacking init-system-helpers (1.28ubuntu1) ... Replacing files in old package sysv-rc (2.88dsf-59.2ubuntu2) ... Setting up init-system-helpers (1.28ubuntu1) ... dpkg: perl-modules: dependency problems, but removing anyway as you requested: perl depends on perl-modules (>= 5.20.2-6). (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11505 files and directories currently installed.) Removing perl-modules (5.20.2-6) ... Purging configuration files for perl-modules (5.20.2-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10777 files and directories currently installed.) Preparing to unpack .../perl_5.22.1-5_powerpc.deb ... Unpacking perl (5.22.1-5) over (5.20.2-6) ... Selecting previously unselected package perl-modules-5.22. Preparing to unpack .../perl-modules-5.22_5.22.1-5_all.deb ... Unpacking perl-modules-5.22 (5.22.1-5) ... Selecting previously unselected package libperl5.22:powerpc. Preparing to unpack .../libperl5.22_5.22.1-5_powerpc.deb ... Unpacking libperl5.22:powerpc (5.22.1-5) ... Preparing to unpack .../perl-base_5.22.1-5_powerpc.deb ... Unpacking perl-base (5.22.1-5) over (5.20.2-6) ... Setting up perl-base (5.22.1-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../init_1.28ubuntu1_powerpc.deb ... Unpacking init (1.28ubuntu1) over (1.23ubuntu3) ... Setting up init (1.28ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../login_1%3a4.2-3.1ubuntu2_powerpc.deb ... Unpacking login (1:4.2-3.1ubuntu2) over (1:4.1.5.1-1.1ubuntu7) ... Setting up login (1:4.2-3.1ubuntu2) ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/pam.d/su ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libsmartcols1_2.27.1-1ubuntu4_powerpc.deb ... Unpacking libsmartcols1:powerpc (2.27.1-1ubuntu4) over (2.26.2-6ubuntu3) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libsmartcols1:powerpc (2.27.1-1ubuntu4) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libaudit-common_1%3a2.4.5-1ubuntu2_all.deb ... Unpacking libaudit-common (1:2.4.5-1ubuntu2) over (1:2.4.2-1ubuntu1) ... Setting up libaudit-common (1:2.4.5-1ubuntu2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libaudit1_1%3a2.4.5-1ubuntu2_powerpc.deb ... Unpacking libaudit1:powerpc (1:2.4.5-1ubuntu2) over (1:2.4.2-1ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libaudit1:powerpc (1:2.4.5-1ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libpcre3_2%3a8.38-1ubuntu1_powerpc.deb ... Unpacking libpcre3:powerpc (2:8.38-1ubuntu1) over (2:8.35-7.1ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libpcre3:powerpc (2:8.38-1ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libselinux1_2.4-3build1_powerpc.deb ... Unpacking libselinux1:powerpc (2.4-3build1) over (2.3-2build1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libselinux1:powerpc (2.4-3build1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libsepol1_2.4-2_powerpc.deb ... Unpacking libsepol1:powerpc (2.4-2) over (2.3-2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libsepol1:powerpc (2.4-2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libsemanage-common_2.4-3build1_all.deb ... Unpacking libsemanage-common (2.4-3build1) over (2.3-1build2) ... Setting up libsemanage-common (2.4-3build1) ... Installing new version of config file /etc/selinux/semanage.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libsemanage1_2.4-3build1_powerpc.deb ... Unpacking libsemanage1:powerpc (2.4-3build1) over (2.3-1build2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libsemanage1:powerpc (2.4-3build1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libfdisk1_2.27.1-1ubuntu4_powerpc.deb ... Unpacking libfdisk1:powerpc (2.27.1-1ubuntu4) over (2.26.2-6ubuntu3) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libfdisk1:powerpc (2.27.1-1ubuntu4) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libtinfo5_6.0+20151024-2ubuntu2_powerpc.deb ... Unpacking libtinfo5:powerpc (6.0+20151024-2ubuntu2) over (5.9+20150516-2ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libtinfo5:powerpc (6.0+20151024-2ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libncurses5_6.0+20151024-2ubuntu2_powerpc.deb ... Unpacking libncurses5:powerpc (6.0+20151024-2ubuntu2) over (5.9+20150516-2ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libncurses5:powerpc (6.0+20151024-2ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libncursesw5_6.0+20151024-2ubuntu2_powerpc.deb ... Unpacking libncursesw5:powerpc (6.0+20151024-2ubuntu2) over (5.9+20150516-2ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libncursesw5:powerpc (6.0+20151024-2ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../sysv-rc_2.88dsf-59.3ubuntu2_all.deb ... Unpacking sysv-rc (2.88dsf-59.3ubuntu2) over (2.88dsf-59.2ubuntu2) ... Setting up sysvinit-utils (2.88dsf-59.3ubuntu2) ... Setting up sysv-rc (2.88dsf-59.3ubuntu2) ... Processing triggers for systemd (225-1ubuntu9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12079 files and directories currently installed.) Preparing to unpack .../libsystemd0_228-5ubuntu3_powerpc.deb ... Unpacking libsystemd0:powerpc (228-5ubuntu3) over (225-1ubuntu9) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libsystemd0:powerpc (228-5ubuntu3) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12079 files and directories currently installed.) Preparing to unpack .../util-linux_2.27.1-1ubuntu4_powerpc.deb ... Unpacking util-linux (2.27.1-1ubuntu4) over (2.26.2-6ubuntu3) ... Setting up util-linux (2.27.1-1ubuntu4) ... Installing new version of config file /etc/init/hwclock-save.conf ... Installing new version of config file /etc/init/hwclock.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12087 files and directories currently installed.) Preparing to unpack .../libudev1_228-5ubuntu3_powerpc.deb ... Unpacking libudev1:powerpc (228-5ubuntu3) over (225-1ubuntu9) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libudev1:powerpc (228-5ubuntu3) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12087 files and directories currently installed.) Preparing to unpack .../udev_228-5ubuntu3_powerpc.deb ... Unpacking udev (228-5ubuntu3) over (225-1ubuntu9) ... Preparing to unpack .../systemd_228-5ubuntu3_powerpc.deb ... Unpacking systemd (228-5ubuntu3) over (225-1ubuntu9) ... Setting up systemd (228-5ubuntu3) ... Installing new version of config file /etc/pam.d/systemd-user ... Installing new version of config file /etc/systemd/journald.conf ... Installing new version of config file /etc/systemd/logind.conf ... Installing new version of config file /etc/systemd/system.conf ... addgroup: The group `systemd-journal' already exists as a system group. Exiting. Removing obsolete conffile /etc/X11/xinit/xinitrc.d/50-systemd-user.sh ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../initscripts_2.88dsf-59.3ubuntu2_powerpc.deb ... Unpacking initscripts (2.88dsf-59.3ubuntu2) over (2.88dsf-59.2ubuntu2) ... Processing triggers for systemd (228-5ubuntu3) ... Setting up initscripts (2.88dsf-59.3ubuntu2) ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/default/rcS ... Processing triggers for systemd (228-5ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libacl1_2.2.52-3_powerpc.deb ... Unpacking libacl1:powerpc (2.2.52-3) over (2.2.52-2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libacl1:powerpc (2.2.52-3) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Selecting previously unselected package libprocps4:powerpc. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12081 files and directories currently installed.) Preparing to unpack .../libprocps4_2%3a3.3.10-4ubuntu2_powerpc.deb ... Unpacking libprocps4:powerpc (2:3.3.10-4ubuntu2) ... Preparing to unpack .../debconf_1.5.58ubuntu1_all.deb ... Unpacking debconf (1.5.58ubuntu1) over (1.5.57ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up debconf (1.5.58ubuntu1) ... Removing obsolete conffile /etc/bash_completion.d/debconf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12088 files and directories currently installed.) Preparing to unpack .../procps_2%3a3.3.10-4ubuntu2_powerpc.deb ... Running in chroot, ignoring request. invoke-rc.d: policy-rc.d denied execution of stop. Unpacking procps (2:3.3.10-4ubuntu2) over (1:3.3.9-1ubuntu8) ... Preparing to unpack .../libapparmor1_2.10-0ubuntu12_powerpc.deb ... Unpacking libapparmor1:powerpc (2.10-0ubuntu12) over (2.10-0ubuntu6) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libapparmor1:powerpc (2.10-0ubuntu12) ... Processing triggers for systemd (228-5ubuntu3) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12091 files and directories currently installed.) Preparing to unpack .../libmount1_2.27.1-1ubuntu4_powerpc.deb ... Unpacking libmount1:powerpc (2.27.1-1ubuntu4) over (2.26.2-6ubuntu3) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libmount1:powerpc (2.27.1-1ubuntu4) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12091 files and directories currently installed.) Preparing to unpack .../libseccomp2_2.2.3-2ubuntu3_powerpc.deb ... Unpacking libseccomp2:powerpc (2.2.3-2ubuntu3) over (2.2.3-2ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libseccomp2:powerpc (2.2.3-2ubuntu3) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12091 files and directories currently installed.) Preparing to unpack .../libcap2-bin_1%3a2.24-12_powerpc.deb ... Unpacking libcap2-bin (1:2.24-12) over (1:2.24-9) ... Setting up libcap2-bin (1:2.24-12) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12091 files and directories currently installed.) Preparing to unpack .../lsb-base_9.20160110_all.deb ... Unpacking lsb-base (9.20160110) over (4.1+Debian11ubuntu8) ... Setting up lsb-base (9.20160110) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12091 files and directories currently installed.) Preparing to unpack .../passwd_1%3a4.2-3.1ubuntu2_powerpc.deb ... Unpacking passwd (1:4.2-3.1ubuntu2) over (1:4.1.5.1-1.1ubuntu7) ... Setting up passwd (1:4.2-3.1ubuntu2) ... Installing new version of config file /etc/init/passwd.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12093 files and directories currently installed.) Preparing to unpack .../libuuid1_2.27.1-1ubuntu4_powerpc.deb ... Unpacking libuuid1:powerpc (2.27.1-1ubuntu4) over (2.26.2-6ubuntu3) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libuuid1:powerpc (2.27.1-1ubuntu4) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12093 files and directories currently installed.) Preparing to unpack .../libblkid1_2.27.1-1ubuntu4_powerpc.deb ... Unpacking libblkid1:powerpc (2.27.1-1ubuntu4) over (2.26.2-6ubuntu3) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libblkid1:powerpc (2.27.1-1ubuntu4) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12093 files and directories currently installed.) Preparing to unpack .../tzdata_2016a-1_all.deb ... Unpacking tzdata (2016a-1) over (2015g-1) ... Setting up tzdata (2016a-1) ... Current default time zone: 'Etc/UTC' Local time is now: Sun Feb 7 23:28:45 UTC 2016. Universal Time is now: Sun Feb 7 23:28:45 UTC 2016. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12093 files and directories currently installed.) Preparing to unpack .../mount_2.27.1-1ubuntu4_powerpc.deb ... Unpacking mount (2.27.1-1ubuntu4) over (2.26.2-6ubuntu3) ... Setting up mount (2.27.1-1ubuntu4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12093 files and directories currently installed.) Preparing to unpack .../ncurses-bin_6.0+20151024-2ubuntu2_powerpc.deb ... Unpacking ncurses-bin (6.0+20151024-2ubuntu2) over (5.9+20150516-2ubuntu1) ... Setting up ncurses-bin (6.0+20151024-2ubuntu2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12089 files and directories currently installed.) Preparing to unpack .../tar_1.28-2.1_powerpc.deb ... Unpacking tar (1.28-2.1) over (1.27.1-2) ... Setting up tar (1.28-2.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12089 files and directories currently installed.) Preparing to unpack .../apt_1.1.10_powerpc.deb ... Unpacking apt (1.1.10) over (1.0.10.2ubuntu1) ... Selecting previously unselected package libapt-pkg5.0:powerpc. Preparing to unpack .../libapt-pkg5.0_1.1.10_powerpc.deb ... Unpacking libapt-pkg5.0:powerpc (1.1.10) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libapt-pkg5.0:powerpc (1.1.10) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12117 files and directories currently installed.) Preparing to unpack .../gpgv_1.4.20-1ubuntu1_powerpc.deb ... Unpacking gpgv (1.4.20-1ubuntu1) over (1.4.18-7ubuntu1) ... Setting up gpgv (1.4.20-1ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12117 files and directories currently installed.) Preparing to unpack .../readline-common_6.3-8ubuntu2_all.deb ... Unpacking readline-common (6.3-8ubuntu2) over (6.3-8ubuntu1) ... Setting up readline-common (6.3-8ubuntu2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12117 files and directories currently installed.) Preparing to unpack .../libreadline6_6.3-8ubuntu2_powerpc.deb ... Unpacking libreadline6:powerpc (6.3-8ubuntu2) over (6.3-8ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libreadline6:powerpc (6.3-8ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12117 files and directories currently installed.) Preparing to unpack .../libusb-0.1-4_2%3a0.1.12-28_powerpc.deb ... Unpacking libusb-0.1-4:powerpc (2:0.1.12-28) over (2:0.1.12-27) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libusb-0.1-4:powerpc (2:0.1.12-28) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12116 files and directories currently installed.) Preparing to unpack .../gnupg_1.4.20-1ubuntu1_powerpc.deb ... Unpacking gnupg (1.4.20-1ubuntu1) over (1.4.18-7ubuntu1) ... Setting up gnupg (1.4.20-1ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12115 files and directories currently installed.) Preparing to unpack .../libdebconfclient0_0.198ubuntu1_powerpc.deb ... Unpacking libdebconfclient0:powerpc (0.198ubuntu1) over (0.192ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libdebconfclient0:powerpc (0.198ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12115 files and directories currently installed.) Preparing to unpack .../base-passwd_3.5.39_powerpc.deb ... Unpacking base-passwd (3.5.39) over (3.5.38) ... Setting up base-passwd (3.5.39) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12115 files and directories currently installed.) Preparing to unpack .../ncurses-base_6.0+20151024-2ubuntu2_all.deb ... Unpacking ncurses-base (6.0+20151024-2ubuntu2) over (5.9+20150516-2ubuntu1) ... Setting up ncurses-base (6.0+20151024-2ubuntu2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12116 files and directories currently installed.) Preparing to unpack .../systemd-sysv_228-5ubuntu3_powerpc.deb ... Unpacking systemd-sysv (228-5ubuntu3) over (225-1ubuntu9) ... Setting up systemd-sysv (228-5ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12116 files and directories currently installed.) Preparing to unpack .../libdbus-1-3_1.10.6-1ubuntu1_powerpc.deb ... Unpacking libdbus-1-3:powerpc (1.10.6-1ubuntu1) over (1.10.0-1ubuntu1) ... Preparing to unpack .../libnih-dbus1_1.0.3-4.3ubuntu1_powerpc.deb ... Unpacking libnih-dbus1:powerpc (1.0.3-4.3ubuntu1) over (1.0.3-4ubuntu27) ... Preparing to unpack .../libnih1_1.0.3-4.3ubuntu1_powerpc.deb ... Unpacking libnih1:powerpc (1.0.3-4.3ubuntu1) over (1.0.3-4ubuntu27) ... Preparing to unpack .../libcomerr2_1.42.13-1ubuntu1_powerpc.deb ... Unpacking libcomerr2:powerpc (1.42.13-1ubuntu1) over (1.42.12-1ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libcomerr2:powerpc (1.42.13-1ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12116 files and directories currently installed.) Preparing to unpack .../libdevmapper1.02.1_2%3a1.02.110-1ubuntu4_powerpc.deb ... Unpacking libdevmapper1.02.1:powerpc (2:1.02.110-1ubuntu4) over (2:1.02.99-1ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libdevmapper1.02.1:powerpc (2:1.02.110-1ubuntu4) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12116 files and directories currently installed.) Preparing to unpack .../libgpg-error0_1.21-1_powerpc.deb ... Unpacking libgpg-error0:powerpc (1.21-1) over (1.19-2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libgpg-error0:powerpc (1.21-1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12116 files and directories currently installed.) Preparing to unpack .../libgcrypt20_1.6.4-5_powerpc.deb ... Unpacking libgcrypt20:powerpc (1.6.4-5) over (1.6.3-2ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libgcrypt20:powerpc (1.6.4-5) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12116 files and directories currently installed.) Preparing to unpack .../libss2_1.42.13-1ubuntu1_powerpc.deb ... Unpacking libss2:powerpc (1.42.13-1ubuntu1) over (1.42.12-1ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libss2:powerpc (1.42.13-1ubuntu1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12116 files and directories currently installed.) Preparing to unpack .../multiarch-support_2.21-0ubuntu5_powerpc.deb ... Unpacking multiarch-support (2.21-0ubuntu5) over (2.21-0ubuntu4) ... Setting up multiarch-support (2.21-0ubuntu5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12116 files and directories currently installed.) Preparing to unpack .../libffi6_3.2.1-4_powerpc.deb ... Unpacking libffi6:powerpc (3.2.1-4) over (3.2.1-3) ... Preparing to unpack .../libhogweed4_3.2-1_powerpc.deb ... Unpacking libhogweed4:powerpc (3.2-1) over (3.1.1-4) ... Preparing to unpack .../libnettle6_3.2-1_powerpc.deb ... Unpacking libnettle6:powerpc (3.2-1) over (3.1.1-4) ... Preparing to unpack .../libp11-kit0_0.23.2-3_powerpc.deb ... Unpacking libp11-kit0:powerpc (0.23.2-3) over (0.23.1-3) ... Preparing to unpack .../libtasn1-6_4.7-3_powerpc.deb ... Unpacking libtasn1-6:powerpc (4.7-3) over (4.5-2) ... Preparing to unpack .../libgnutls-deb0-28_3.3.20-1ubuntu1_powerpc.deb ... Unpacking libgnutls-deb0-28:powerpc (3.3.20-1ubuntu1) over (3.3.15-5ubuntu2) ... Preparing to unpack .../libpng12-0_1.2.54-1ubuntu1_powerpc.deb ... Unpacking libpng12-0:powerpc (1.2.54-1ubuntu1) over (1.2.51-0ubuntu3) ... Preparing to unpack .../libsqlite3-0_3.10.2-1_powerpc.deb ... Unpacking libsqlite3-0:powerpc (3.10.2-1) over (3.8.11.1-1) ... Preparing to unpack .../libssl1.0.0_1.0.2f-2ubuntu1_powerpc.deb ... Unpacking libssl1.0.0:powerpc (1.0.2f-2ubuntu1) over (1.0.2d-0ubuntu1) ... Preparing to unpack .../libgssapi-krb5-2_1.13.2+dfsg-4_powerpc.deb ... Unpacking libgssapi-krb5-2:powerpc (1.13.2+dfsg-4) over (1.13.2+dfsg-2) ... Preparing to unpack .../libkrb5-3_1.13.2+dfsg-4_powerpc.deb ... Unpacking libkrb5-3:powerpc (1.13.2+dfsg-4) over (1.13.2+dfsg-2) ... Preparing to unpack .../libkrb5support0_1.13.2+dfsg-4_powerpc.deb ... Unpacking libkrb5support0:powerpc (1.13.2+dfsg-4) over (1.13.2+dfsg-2) ... Preparing to unpack .../libk5crypto3_1.13.2+dfsg-4_powerpc.deb ... Unpacking libk5crypto3:powerpc (1.13.2+dfsg-4) over (1.13.2+dfsg-2) ... Preparing to unpack .../libkeyutils1_1.5.9-8ubuntu1_powerpc.deb ... Unpacking libkeyutils1:powerpc (1.5.9-8ubuntu1) over (1.5.9-5ubuntu1) ... Preparing to unpack .../libidn11_1.32-3ubuntu1_powerpc.deb ... Unpacking libidn11:powerpc (1.32-3ubuntu1) over (1.28-1ubuntu2) ... Preparing to unpack .../libroken18-heimdal_1.7~git20150920+dfsg-4ubuntu1_powerpc.deb ... Unpacking libroken18-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) over (1.6~rc2+dfsg-10ubuntu1) ... Preparing to unpack .../libasn1-8-heimdal_1.7~git20150920+dfsg-4ubuntu1_powerpc.deb ... Unpacking libasn1-8-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) over (1.6~rc2+dfsg-10ubuntu1) ... Preparing to unpack .../libhcrypto4-heimdal_1.7~git20150920+dfsg-4ubuntu1_powerpc.deb ... Unpacking libhcrypto4-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) over (1.6~rc2+dfsg-10ubuntu1) ... Preparing to unpack .../libheimbase1-heimdal_1.7~git20150920+dfsg-4ubuntu1_powerpc.deb ... Unpacking libheimbase1-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) over (1.6~rc2+dfsg-10ubuntu1) ... Preparing to unpack .../libwind0-heimdal_1.7~git20150920+dfsg-4ubuntu1_powerpc.deb ... Unpacking libwind0-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) over (1.6~rc2+dfsg-10ubuntu1) ... Preparing to unpack .../libhx509-5-heimdal_1.7~git20150920+dfsg-4ubuntu1_powerpc.deb ... Unpacking libhx509-5-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) over (1.6~rc2+dfsg-10ubuntu1) ... Preparing to unpack .../libkrb5-26-heimdal_1.7~git20150920+dfsg-4ubuntu1_powerpc.deb ... Unpacking libkrb5-26-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) over (1.6~rc2+dfsg-10ubuntu1) ... Preparing to unpack .../libheimntlm0-heimdal_1.7~git20150920+dfsg-4ubuntu1_powerpc.deb ... Unpacking libheimntlm0-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) over (1.6~rc2+dfsg-10ubuntu1) ... Preparing to unpack .../libgssapi3-heimdal_1.7~git20150920+dfsg-4ubuntu1_powerpc.deb ... Unpacking libgssapi3-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) over (1.6~rc2+dfsg-10ubuntu1) ... Preparing to unpack .../libldap-2.4-2_2.4.42+dfsg-2ubuntu1_powerpc.deb ... Unpacking libldap-2.4-2:powerpc (2.4.42+dfsg-2ubuntu1) over (2.4.41+dfsg-1ubuntu2) ... Preparing to unpack .../librtmp1_2.4+20151223.gitfa8646d-1_powerpc.deb ... Unpacking librtmp1:powerpc (2.4+20151223.gitfa8646d-1) over (2.4+20150115.gita107cef-1build1) ... Preparing to unpack .../libcurl3-gnutls_7.47.0-1ubuntu1_powerpc.deb ... Unpacking libcurl3-gnutls:powerpc (7.47.0-1ubuntu1) over (7.43.0-1ubuntu2) ... Preparing to unpack .../apt-transport-https_1.1.10_powerpc.deb ... Unpacking apt-transport-https (1.1.10) over (1.0.10.2ubuntu1) ... Preparing to unpack .../openssl_1.0.2f-2ubuntu1_powerpc.deb ... Unpacking openssl (1.0.2f-2ubuntu1) over (1.0.2d-0ubuntu1) ... Preparing to unpack .../ca-certificates_20160104_all.deb ... Unpacking ca-certificates (20160104) over (20150426ubuntu1) ... Preparing to unpack .../advancecomp_1.20-1_powerpc.deb ... Unpacking advancecomp (1.20-1) over (1.19-1) ... Preparing to unpack .../cpp_4%3a5.2.1-16ubuntu2_powerpc.deb ... Unpacking cpp (4:5.2.1-16ubuntu2) over (4:5.2.1-3ubuntu1) ... Preparing to unpack .../dmsetup_2%3a1.02.110-1ubuntu4_powerpc.deb ... Unpacking dmsetup (2:1.02.110-1ubuntu4) over (2:1.02.99-1ubuntu1) ... Preparing to unpack .../dpkg-dev_1.18.4ubuntu1_all.deb ... Unpacking dpkg-dev (1.18.4ubuntu1) over (1.18.2ubuntu5) ... Preparing to unpack .../libdpkg-perl_1.18.4ubuntu1_all.deb ... Unpacking libdpkg-perl (1.18.4ubuntu1) over (1.18.2ubuntu5) ... Preparing to unpack .../make_4.1-5_powerpc.deb ... Unpacking make (4.1-5) over (4.0-8.2) ... Preparing to unpack .../gcc_4%3a5.2.1-16ubuntu2_powerpc.deb ... Removing old gcc doc directory. Unpacking gcc (4:5.2.1-16ubuntu2) over (4:5.2.1-3ubuntu1) ... Preparing to unpack .../g++_4%3a5.2.1-16ubuntu2_powerpc.deb ... Unpacking g++ (4:5.2.1-16ubuntu2) over (4:5.2.1-3ubuntu1) ... Preparing to unpack .../pkg-create-dbgsym_0.70_all.deb ... Unpacking pkg-create-dbgsym (0.70) over (0.69) ... Preparing to unpack .../pkgbinarymangler_129_all.deb ... Unpacking pkgbinarymangler (129) over (122) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up libc-dev-bin (2.21-0ubuntu5) ... Setting up linux-libc-dev:powerpc (4.4.0-4.19) ... Setting up libc6-dev:powerpc (2.21-0ubuntu5) ... Setting up libgomp1:powerpc (5.3.1-8ubuntu2) ... Setting up libatomic1:powerpc (5.3.1-8ubuntu2) ... Setting up libasan2:powerpc (5.3.1-8ubuntu2) ... Setting up libubsan0:powerpc (5.3.1-8ubuntu2) ... Setting up libgmp10:powerpc (2:6.1.0+dfsg-2) ... Setting up libisl15:powerpc (0.16.1-1) ... Setting up libmpfr4:powerpc (3.1.3-2) ... Setting up cpp-5 (5.3.1-8ubuntu2) ... Setting up libcc1-0:powerpc (5.3.1-8ubuntu2) ... Setting up binutils (2.26-3ubuntu1) ... Setting up libgcc-5-dev:powerpc (5.3.1-8ubuntu2) ... Setting up gcc-5 (5.3.1-8ubuntu2) ... Setting up libstdc++-5-dev:powerpc (5.3.1-8ubuntu2) ... Setting up g++-5 (5.3.1-8ubuntu2) ... Setting up perl-modules-5.22 (5.22.1-5) ... Setting up libperl5.22:powerpc (5.22.1-5) ... Setting up perl (5.22.1-5) ... Setting up libprocps4:powerpc (2:3.3.10-4ubuntu2) ... Setting up procps (2:3.3.10-4ubuntu2) ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults Running in chroot, ignoring request. invoke-rc.d: policy-rc.d denied execution of start. Setting up udev (228-5ubuntu3) ... Installing new version of config file /etc/init.d/udev ... addgroup: The group `input' already exists as a system group. Exiting. Running in chroot, ignoring request. invoke-rc.d: policy-rc.d denied execution of restart. Removing obsolete conffile /etc/init.d/lvm2 ... Setting up apt (1.1.10) ... Installing new version of config file /etc/apt/apt.conf.d/01-vendor-ubuntu ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/kernel/postinst.d/apt-auto-removal ... usermod: no changes Setting up libdbus-1-3:powerpc (1.10.6-1ubuntu1) ... Setting up libnih1:powerpc (1.0.3-4.3ubuntu1) ... Setting up libnih-dbus1:powerpc (1.0.3-4.3ubuntu1) ... Setting up libffi6:powerpc (3.2.1-4) ... Setting up libnettle6:powerpc (3.2-1) ... Setting up libhogweed4:powerpc (3.2-1) ... Setting up libp11-kit0:powerpc (0.23.2-3) ... Setting up libtasn1-6:powerpc (4.7-3) ... Setting up libgnutls-deb0-28:powerpc (3.3.20-1ubuntu1) ... Setting up libpng12-0:powerpc (1.2.54-1ubuntu1) ... Setting up libsqlite3-0:powerpc (3.10.2-1) ... Setting up libssl1.0.0:powerpc (1.0.2f-2ubuntu1) ... Setting up libkrb5support0:powerpc (1.13.2+dfsg-4) ... Setting up libk5crypto3:powerpc (1.13.2+dfsg-4) ... Setting up libkeyutils1:powerpc (1.5.9-8ubuntu1) ... Setting up libkrb5-3:powerpc (1.13.2+dfsg-4) ... Setting up libgssapi-krb5-2:powerpc (1.13.2+dfsg-4) ... Setting up libidn11:powerpc (1.32-3ubuntu1) ... Setting up libroken18-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) ... Setting up libasn1-8-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) ... Setting up libhcrypto4-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) ... Setting up libheimbase1-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) ... Setting up libwind0-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) ... Setting up libhx509-5-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) ... Setting up libkrb5-26-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) ... Setting up libheimntlm0-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) ... Setting up libgssapi3-heimdal:powerpc (1.7~git20150920+dfsg-4ubuntu1) ... Setting up libldap-2.4-2:powerpc (2.4.42+dfsg-2ubuntu1) ... Setting up librtmp1:powerpc (2.4+20151223.gitfa8646d-1) ... Setting up libcurl3-gnutls:powerpc (7.47.0-1ubuntu1) ... Setting up apt-transport-https (1.1.10) ... Setting up openssl (1.0.2f-2ubuntu1) ... Setting up ca-certificates (20160104) ... Setting up advancecomp (1.20-1) ... Setting up cpp (4:5.2.1-16ubuntu2) ... Setting up dmsetup (2:1.02.110-1ubuntu4) ... Setting up libdpkg-perl (1.18.4ubuntu1) ... Setting up make (4.1-5) ... Setting up dpkg-dev (1.18.4ubuntu1) ... Setting up gcc (4:5.2.1-16ubuntu2) ... Setting up g++ (4:5.2.1-16ubuntu2) ... Setting up pkg-create-dbgsym (0.70) ... Setting up pkgbinarymangler (129) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Processing triggers for systemd (228-5ubuntu3) ... Processing triggers for ca-certificates (20160104) ... Updating certificates in /etc/ssl/certs... 6 added, 20 removed; done. Running hooks in /etc/ca-certificates/update.d... done. RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', 'PACKAGEBUILD-8981103', 'powerpc', 'xenial-proposed', '-c', 'chroot:autobuild', '--arch=powerpc', '--dist=xenial-proposed', '--purge=never', '--nolog', 'libverilog-perl_3.418-1.dsc'] Initiating build PACKAGEBUILD-8981103 with 24 jobs across 24 processor cores. Kernel reported to sbuild: 3.2.0-97-powerpc64-smp #137-Ubuntu SMP Thu Dec 17 15:33:13 UTC 2015 ppc sbuild (Debian sbuild) 0.65.2 (24 Mar 2015) on sagari.buildd ╔══════════════════════════════════════════════════════════════════════════════╗ ║ libverilog-perl 3.418-1 (powerpc) 07 Feb 2016 23:29 ║ ╚══════════════════════════════════════════════════════════════════════════════╝ Package: libverilog-perl Version: 3.418-1 Source Version: 3.418-1 Distribution: xenial-proposed Machine Architecture: powerpc Host Architecture: powerpc Build Architecture: powerpc I: NOTICE: Log filtering will replace 'build/libverilog-perl-VsG5X9/libverilog-perl-3.418' with '«PKGBUILDDIR»' I: NOTICE: Log filtering will replace 'build/libverilog-perl-VsG5X9' with '«BUILDDIR»' I: NOTICE: Log filtering will replace 'home/buildd/build-PACKAGEBUILD-8981103/chroot-autobuild' with '«CHROOT»' ┌──────────────────────────────────────────────────────────────────────────────┐ │ Fetch source files │ └──────────────────────────────────────────────────────────────────────────────┘ Local sources ───────────── libverilog-perl_3.418-1.dsc exists in .; copying to chroot Check architectures ─────────────────── Check dependencies ────────────────── Merged Build-Depends: build-essential, fakeroot Filtered Build-Depends: build-essential, fakeroot dpkg-deb: building package 'sbuild-build-depends-core-dummy' in '/«BUILDDIR»/resolver-341sBu/apt_archive/sbuild-build-depends-core-dummy.deb'. Get:1 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ InRelease Ign:1 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ InRelease Get:2 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Release [2119 B] Get:2 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Release [2119 B] Get:3 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Release.gpg Ign:3 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Release.gpg Get:4 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Sources [208 B] Get:5 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Packages [527 B] Ign:4 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Sources Ign:5 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Packages Get:4 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Sources [208 B] Get:5 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Packages [527 B] Reading package lists... W: The repository 'file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ Release' is not signed. Reading package lists... ┌──────────────────────────────────────────────────────────────────────────────┐ │ Install core build dependencies (apt-based resolver) │ └──────────────────────────────────────────────────────────────────────────────┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libapt-pkg4.16 libisl13 libprocps3 udev Use 'sudo apt autoremove' to remove them. The following NEW packages will be installed: sbuild-build-depends-core-dummy 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/772 B of archives. After this operation, 0 B of additional disk space will be used. WARNING: The following packages cannot be authenticated! sbuild-build-depends-core-dummy Authentication warning overridden. Get:1 file:/«BUILDDIR»/resolver-341sBu/apt_archive ./ sbuild-build-depends-core-dummy 0.invalid.0 [772 B] debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sbuild-build-depends-core-dummy. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12096 files and directories currently installed.) Preparing to unpack .../sbuild-build-depends-core-dummy.deb ... Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ... Setting up sbuild-build-depends-core-dummy (0.invalid.0) ... Merged Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, init, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, tar, util-linux, libc6-dev | libc-dev, gcc (>= 4:5.2), g++ (>= 4:5.2), make, dpkg-dev (>= 1.17.11), debhelper (>= 9.20120312), perl, flex, bison, libtest-pod-perl, libbit-vector-perl Filtered Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, init, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, tar, util-linux, libc6-dev | libc-dev, gcc (>= 4:5.2), g++ (>= 4:5.2), make, dpkg-dev (>= 1.17.11), debhelper (>= 9.20120312), perl, flex, bison, libtest-pod-perl, libbit-vector-perl dpkg-deb: building package 'sbuild-build-depends-libverilog-perl-dummy' in '/«BUILDDIR»/resolver-TiWe3q/apt_archive/sbuild-build-depends-libverilog-perl-dummy.deb'. Get:1 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ InRelease Ign:1 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ InRelease Get:2 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Release [2119 B] Get:2 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Release [2119 B] Get:3 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Release.gpg Ign:3 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Release.gpg Get:4 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Sources [460 B] Get:5 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Packages [730 B] Ign:4 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Sources Ign:5 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Packages Get:4 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Sources [460 B] Get:5 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Packages [730 B] Reading package lists... W: The repository 'file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ Release' is not signed. Reading package lists... ┌──────────────────────────────────────────────────────────────────────────────┐ │ Install libverilog-perl build dependencies (apt-based resolver) │ └──────────────────────────────────────────────────────────────────────────────┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libapt-pkg4.16 libisl13 libprocps3 udev Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: autotools-dev bison bsdmainutils debhelper dh-strip-nondeterminism file flex gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasprintf0v5 libbison-dev libbit-vector-perl libcarp-clan-perl libcroco3 libfile-stripnondeterminism-perl libfl-dev libglib2.0-0 libicu55 libmagic1 libpipeline1 libsigsegv2 libtest-pod-perl libtimedate-perl libunistring0 libxml2 m4 man-db po-debconf Suggested packages: bison-doc wamerican | wordlist whois vacation dh-make gettext-doc autopoint groff less www-browser libmail-box-perl Recommended packages: curl | wget | lynx-cur libasprintf-dev libgettextpo-dev libglib2.0-data shared-mime-info xdg-user-dirs xml-core libmail-sendmail-perl The following NEW packages will be installed: autotools-dev bison bsdmainutils debhelper dh-strip-nondeterminism file flex gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasprintf0v5 libbison-dev libbit-vector-perl libcarp-clan-perl libcroco3 libfile-stripnondeterminism-perl libfl-dev libglib2.0-0 libicu55 libmagic1 libpipeline1 libsigsegv2 libtest-pod-perl libtimedate-perl libunistring0 libxml2 m4 man-db po-debconf sbuild-build-depends-libverilog-perl-dummy 0 upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 15.2 MB/15.2 MB of archives. After this operation, 63.4 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! sbuild-build-depends-libverilog-perl-dummy Authentication warning overridden. Get:1 file:/«BUILDDIR»/resolver-TiWe3q/apt_archive ./ sbuild-build-depends-libverilog-perl-dummy 0.invalid.0 [972 B] Get:2 http://ftpmaster.internal/ubuntu xenial/main powerpc groff-base powerpc 1.22.3-7 [1201 kB] Get:3 http://ftpmaster.internal/ubuntu xenial/main powerpc bsdmainutils powerpc 9.0.6ubuntu2 [172 kB] Get:4 http://ftpmaster.internal/ubuntu xenial/main powerpc libpipeline1 powerpc 1.4.1-2 [24.2 kB] Get:5 http://ftpmaster.internal/ubuntu xenial/main powerpc man-db powerpc 2.7.5-1 [835 kB] Get:6 http://ftpmaster.internal/ubuntu xenial/main powerpc libsigsegv2 powerpc 2.10-4 [13.7 kB] Get:7 http://ftpmaster.internal/ubuntu xenial/main powerpc m4 powerpc 1.4.17-5 [185 kB] Get:8 http://ftpmaster.internal/ubuntu xenial/main powerpc libfl-dev powerpc 2.6.0-4 [12.6 kB] Get:9 http://ftpmaster.internal/ubuntu xenial/main powerpc flex powerpc 2.6.0-4 [277 kB] Get:10 http://ftpmaster.internal/ubuntu xenial/main powerpc libunistring0 powerpc 0.9.3-5.2ubuntu1 [254 kB] Get:11 http://ftpmaster.internal/ubuntu xenial/main powerpc libmagic1 powerpc 1:5.25-2ubuntu1 [214 kB] Get:12 http://ftpmaster.internal/ubuntu xenial/main powerpc file powerpc 1:5.25-2ubuntu1 [21.1 kB] Get:13 http://ftpmaster.internal/ubuntu xenial/main powerpc libasprintf0v5 powerpc 0.19.7-2ubuntu2 [6588 B] Get:14 http://ftpmaster.internal/ubuntu xenial/main powerpc gettext-base powerpc 0.19.7-2ubuntu2 [44.8 kB] Get:15 http://ftpmaster.internal/ubuntu xenial/main powerpc libglib2.0-0 powerpc 2.47.5-1 [966 kB] Get:16 http://ftpmaster.internal/ubuntu xenial/main powerpc libicu55 powerpc 55.1-7 [7454 kB] Get:17 http://ftpmaster.internal/ubuntu xenial/main powerpc libxml2 powerpc 2.9.3+dfsg1-1 [573 kB] Get:18 http://ftpmaster.internal/ubuntu xenial/main powerpc autotools-dev all 20150820.1 [39.8 kB] Get:19 http://ftpmaster.internal/ubuntu xenial/main powerpc libbison-dev powerpc 2:3.0.4.dfsg-1 [338 kB] Get:20 http://ftpmaster.internal/ubuntu xenial/main powerpc bison powerpc 2:3.0.4.dfsg-1 [236 kB] Get:21 http://ftpmaster.internal/ubuntu xenial/main powerpc libcroco3 powerpc 0.6.11-1 [69.3 kB] Get:22 http://ftpmaster.internal/ubuntu xenial/main powerpc gettext powerpc 0.19.7-2ubuntu2 [1019 kB] Get:23 http://ftpmaster.internal/ubuntu xenial/main powerpc intltool-debian all 0.35.0+20060710.4 [24.9 kB] Get:24 http://ftpmaster.internal/ubuntu xenial/main powerpc po-debconf all 1.0.19 [234 kB] Get:25 http://ftpmaster.internal/ubuntu xenial/main powerpc libarchive-zip-perl all 1.56-2 [84.1 kB] Get:26 http://ftpmaster.internal/ubuntu xenial/main powerpc libfile-stripnondeterminism-perl all 0.015-1 [10.3 kB] Get:27 http://ftpmaster.internal/ubuntu xenial/main powerpc libtimedate-perl all 2.3000-2 [37.5 kB] Get:28 http://ftpmaster.internal/ubuntu xenial/main powerpc dh-strip-nondeterminism all 0.015-1 [4864 B] Get:29 http://ftpmaster.internal/ubuntu xenial/main powerpc debhelper all 9.20160115ubuntu2 [740 kB] Get:30 http://ftpmaster.internal/ubuntu xenial/main powerpc libcarp-clan-perl all 6.04-2 [11.6 kB] Get:31 http://ftpmaster.internal/ubuntu xenial/main powerpc libbit-vector-perl powerpc 7.4-1build1 [133 kB] Get:32 http://ftpmaster.internal/ubuntu xenial/main powerpc libtest-pod-perl all 1.51-1 [10.9 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 15.2 MB in 0s (43.4 MB/s) Selecting previously unselected package groff-base. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12096 files and directories currently installed.) Preparing to unpack .../groff-base_1.22.3-7_powerpc.deb ... Unpacking groff-base (1.22.3-7) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../bsdmainutils_9.0.6ubuntu2_powerpc.deb ... Unpacking bsdmainutils (9.0.6ubuntu2) ... Selecting previously unselected package libpipeline1:powerpc. Preparing to unpack .../libpipeline1_1.4.1-2_powerpc.deb ... Unpacking libpipeline1:powerpc (1.4.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../man-db_2.7.5-1_powerpc.deb ... Unpacking man-db (2.7.5-1) ... Selecting previously unselected package libsigsegv2:powerpc. Preparing to unpack .../libsigsegv2_2.10-4_powerpc.deb ... Unpacking libsigsegv2:powerpc (2.10-4) ... Selecting previously unselected package m4. Preparing to unpack .../m4_1.4.17-5_powerpc.deb ... Unpacking m4 (1.4.17-5) ... Selecting previously unselected package libfl-dev. Preparing to unpack .../libfl-dev_2.6.0-4_powerpc.deb ... Unpacking libfl-dev (2.6.0-4) ... Selecting previously unselected package flex. Preparing to unpack .../flex_2.6.0-4_powerpc.deb ... Unpacking flex (2.6.0-4) ... Selecting previously unselected package libunistring0:powerpc. Preparing to unpack .../libunistring0_0.9.3-5.2ubuntu1_powerpc.deb ... Unpacking libunistring0:powerpc (0.9.3-5.2ubuntu1) ... Selecting previously unselected package libmagic1:powerpc. Preparing to unpack .../libmagic1_1%3a5.25-2ubuntu1_powerpc.deb ... Unpacking libmagic1:powerpc (1:5.25-2ubuntu1) ... Selecting previously unselected package file. Preparing to unpack .../file_1%3a5.25-2ubuntu1_powerpc.deb ... Unpacking file (1:5.25-2ubuntu1) ... Selecting previously unselected package libasprintf0v5:powerpc. Preparing to unpack .../libasprintf0v5_0.19.7-2ubuntu2_powerpc.deb ... Unpacking libasprintf0v5:powerpc (0.19.7-2ubuntu2) ... Selecting previously unselected package gettext-base. Preparing to unpack .../gettext-base_0.19.7-2ubuntu2_powerpc.deb ... Unpacking gettext-base (0.19.7-2ubuntu2) ... Selecting previously unselected package libglib2.0-0:powerpc. Preparing to unpack .../libglib2.0-0_2.47.5-1_powerpc.deb ... Unpacking libglib2.0-0:powerpc (2.47.5-1) ... Selecting previously unselected package libicu55:powerpc. Preparing to unpack .../libicu55_55.1-7_powerpc.deb ... Unpacking libicu55:powerpc (55.1-7) ... Selecting previously unselected package libxml2:powerpc. Preparing to unpack .../libxml2_2.9.3+dfsg1-1_powerpc.deb ... Unpacking libxml2:powerpc (2.9.3+dfsg1-1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../autotools-dev_20150820.1_all.deb ... Unpacking autotools-dev (20150820.1) ... Selecting previously unselected package libbison-dev:powerpc. Preparing to unpack .../libbison-dev_2%3a3.0.4.dfsg-1_powerpc.deb ... Unpacking libbison-dev:powerpc (2:3.0.4.dfsg-1) ... Selecting previously unselected package bison. Preparing to unpack .../bison_2%3a3.0.4.dfsg-1_powerpc.deb ... Unpacking bison (2:3.0.4.dfsg-1) ... Selecting previously unselected package libcroco3:powerpc. Preparing to unpack .../libcroco3_0.6.11-1_powerpc.deb ... Unpacking libcroco3:powerpc (0.6.11-1) ... Selecting previously unselected package gettext. Preparing to unpack .../gettext_0.19.7-2ubuntu2_powerpc.deb ... Unpacking gettext (0.19.7-2ubuntu2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../intltool-debian_0.35.0+20060710.4_all.deb ... Unpacking intltool-debian (0.35.0+20060710.4) ... Selecting previously unselected package po-debconf. Preparing to unpack .../po-debconf_1.0.19_all.deb ... Unpacking po-debconf (1.0.19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../libarchive-zip-perl_1.56-2_all.deb ... Unpacking libarchive-zip-perl (1.56-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../libfile-stripnondeterminism-perl_0.015-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (0.015-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../libtimedate-perl_2.3000-2_all.deb ... Unpacking libtimedate-perl (2.3000-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../dh-strip-nondeterminism_0.015-1_all.deb ... Unpacking dh-strip-nondeterminism (0.015-1) ... Selecting previously unselected package debhelper. Preparing to unpack .../debhelper_9.20160115ubuntu2_all.deb ... Unpacking debhelper (9.20160115ubuntu2) ... Selecting previously unselected package libcarp-clan-perl. Preparing to unpack .../libcarp-clan-perl_6.04-2_all.deb ... Unpacking libcarp-clan-perl (6.04-2) ... Selecting previously unselected package libbit-vector-perl. Preparing to unpack .../libbit-vector-perl_7.4-1build1_powerpc.deb ... Unpacking libbit-vector-perl (7.4-1build1) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../libtest-pod-perl_1.51-1_all.deb ... Unpacking libtest-pod-perl (1.51-1) ... Selecting previously unselected package sbuild-build-depends-libverilog-perl-dummy. Preparing to unpack .../sbuild-build-depends-libverilog-perl-dummy.deb ... Unpacking sbuild-build-depends-libverilog-perl-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... Setting up groff-base (1.22.3-7) ... Setting up bsdmainutils (9.0.6ubuntu2) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libpipeline1:powerpc (1.4.1-2) ... Setting up man-db (2.7.5-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libsigsegv2:powerpc (2.10-4) ... Setting up m4 (1.4.17-5) ... Setting up libfl-dev (2.6.0-4) ... Setting up flex (2.6.0-4) ... Setting up libunistring0:powerpc (0.9.3-5.2ubuntu1) ... Setting up libmagic1:powerpc (1:5.25-2ubuntu1) ... Setting up file (1:5.25-2ubuntu1) ... Setting up libasprintf0v5:powerpc (0.19.7-2ubuntu2) ... Setting up gettext-base (0.19.7-2ubuntu2) ... Setting up libglib2.0-0:powerpc (2.47.5-1) ... No schema files found: doing nothing. Setting up libicu55:powerpc (55.1-7) ... Setting up libxml2:powerpc (2.9.3+dfsg1-1) ... Setting up autotools-dev (20150820.1) ... Setting up libbison-dev:powerpc (2:3.0.4.dfsg-1) ... Setting up bison (2:3.0.4.dfsg-1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up libcroco3:powerpc (0.6.11-1) ... Setting up gettext (0.19.7-2ubuntu2) ... Setting up intltool-debian (0.35.0+20060710.4) ... Setting up po-debconf (1.0.19) ... Setting up libarchive-zip-perl (1.56-2) ... Setting up libfile-stripnondeterminism-perl (0.015-1) ... Setting up libtimedate-perl (2.3000-2) ... Setting up libcarp-clan-perl (6.04-2) ... Setting up libbit-vector-perl (7.4-1build1) ... Setting up libtest-pod-perl (1.51-1) ... Setting up debhelper (9.20160115ubuntu2) ... Setting up sbuild-build-depends-libverilog-perl-dummy (0.invalid.0) ... Setting up dh-strip-nondeterminism (0.015-1) ... Processing triggers for libc-bin (2.21-0ubuntu5) ... ┌──────────────────────────────────────────────────────────────────────────────┐ │ Build environment │ └──────────────────────────────────────────────────────────────────────────────┘ Kernel: Linux 3.2.0-97-powerpc64-smp powerpc (ppc) Toolchain package versions: binutils_2.26-3ubuntu1 dpkg-dev_1.18.4ubuntu1 g++-5_5.3.1-8ubuntu2 gcc-5_5.3.1-8ubuntu2 libc6-dev_2.21-0ubuntu5 libstdc++-5-dev_5.3.1-8ubuntu2 libstdc++6_5.3.1-8ubuntu2 linux-libc-dev_4.4.0-4.19 Package versions: adduser_3.113+nmu3ubuntu4 advancecomp_1.20-1 apt_1.1.10 apt-transport-https_1.1.10 autotools-dev_20150820.1 base-files_9.4ubuntu3 base-passwd_3.5.39 bash_4.3-14ubuntu1 binutils_2.26-3ubuntu1 bison_2:3.0.4.dfsg-1 bsdmainutils_9.0.6ubuntu2 bsdutils_1:2.27.1-1ubuntu4 build-essential_12.1ubuntu2 bzip2_1.0.6-8 ca-certificates_20160104 coreutils_8.23-4ubuntu2 cpp_4:5.2.1-16ubuntu2 cpp-5_5.3.1-8ubuntu2 dash_0.5.7-4ubuntu2 debconf_1.5.58ubuntu1 debhelper_9.20160115ubuntu2 debianutils_4.7 dh-strip-nondeterminism_0.015-1 diffutils_1:3.3-3 dmsetup_2:1.02.110-1ubuntu4 dpkg_1.18.4ubuntu1 dpkg-dev_1.18.4ubuntu1 e2fslibs_1.42.13-1ubuntu1 e2fsprogs_1.42.13-1ubuntu1 fakeroot_1.20.2-1ubuntu1 file_1:5.25-2ubuntu1 findutils_4.6.0-2 flex_2.6.0-4 g++_4:5.2.1-16ubuntu2 g++-5_5.3.1-8ubuntu2 gcc_4:5.2.1-16ubuntu2 gcc-5_5.3.1-8ubuntu2 gcc-5-base_5.3.1-8ubuntu2 gettext_0.19.7-2ubuntu2 gettext-base_0.19.7-2ubuntu2 gnupg_1.4.20-1ubuntu1 gpgv_1.4.20-1ubuntu1 grep_2.21-2 groff-base_1.22.3-7 gzip_1.6-4ubuntu1 hostname_3.16ubuntu2 init_1.28ubuntu1 init-system-helpers_1.28ubuntu1 initscripts_2.88dsf-59.3ubuntu2 insserv_1.14.0-5ubuntu3 intltool-debian_0.35.0+20060710.4 libacl1_2.2.52-3 libapparmor1_2.10-0ubuntu12 libapt-pkg4.16_1.0.10.2ubuntu1 libapt-pkg5.0_1.1.10 libarchive-zip-perl_1.56-2 libasan2_5.3.1-8ubuntu2 libasn1-8-heimdal_1.7~git20150920+dfsg-4ubuntu1 libasprintf0v5_0.19.7-2ubuntu2 libatomic1_5.3.1-8ubuntu2 libattr1_1:2.4.47-2 libaudit-common_1:2.4.5-1ubuntu2 libaudit1_1:2.4.5-1ubuntu2 libbison-dev_2:3.0.4.dfsg-1 libbit-vector-perl_7.4-1build1 libblkid1_2.27.1-1ubuntu4 libbz2-1.0_1.0.6-8 libc-bin_2.21-0ubuntu5 libc-dev-bin_2.21-0ubuntu5 libc6_2.21-0ubuntu5 libc6-dev_2.21-0ubuntu5 libcap2_1:2.24-12 libcap2-bin_1:2.24-12 libcarp-clan-perl_6.04-2 libcc1-0_5.3.1-8ubuntu2 libcomerr2_1.42.13-1ubuntu1 libcroco3_0.6.11-1 libcryptsetup4_2:1.6.6-5ubuntu2 libcurl3-gnutls_7.47.0-1ubuntu1 libdb5.3_5.3.28-11 libdbus-1-3_1.10.6-1ubuntu1 libdebconfclient0_0.198ubuntu1 libdevmapper1.02.1_2:1.02.110-1ubuntu4 libdpkg-perl_1.18.4ubuntu1 libfakeroot_1.20.2-1ubuntu1 libfdisk1_2.27.1-1ubuntu4 libffi6_3.2.1-4 libfile-stripnondeterminism-perl_0.015-1 libfl-dev_2.6.0-4 libgcc-5-dev_5.3.1-8ubuntu2 libgcc1_1:5.3.1-8ubuntu2 libgcrypt20_1.6.4-5 libgdbm3_1.8.3-13.1 libglib2.0-0_2.47.5-1 libgmp10_2:6.1.0+dfsg-2 libgnutls-deb0-28_3.3.20-1ubuntu1 libgomp1_5.3.1-8ubuntu2 libgpg-error0_1.21-1 libgssapi-krb5-2_1.13.2+dfsg-4 libgssapi3-heimdal_1.7~git20150920+dfsg-4ubuntu1 libhcrypto4-heimdal_1.7~git20150920+dfsg-4ubuntu1 libheimbase1-heimdal_1.7~git20150920+dfsg-4ubuntu1 libheimntlm0-heimdal_1.7~git20150920+dfsg-4ubuntu1 libhogweed4_3.2-1 libhx509-5-heimdal_1.7~git20150920+dfsg-4ubuntu1 libicu55_55.1-7 libidn11_1.32-3ubuntu1 libisl13_0.14-2 libisl15_0.16.1-1 libk5crypto3_1.13.2+dfsg-4 libkeyutils1_1.5.9-8ubuntu1 libkmod2_21-1ubuntu1 libkrb5-26-heimdal_1.7~git20150920+dfsg-4ubuntu1 libkrb5-3_1.13.2+dfsg-4 libkrb5support0_1.13.2+dfsg-4 libldap-2.4-2_2.4.42+dfsg-2ubuntu1 liblockfile-bin_1.09-6ubuntu1 liblockfile1_1.09-6ubuntu1 liblzma5_5.1.1alpha+20120614-2ubuntu2 libmagic1_1:5.25-2ubuntu1 libmount1_2.27.1-1ubuntu4 libmpc3_1.0.3-1 libmpfr4_3.1.3-2 libncurses5_6.0+20151024-2ubuntu2 libncursesw5_6.0+20151024-2ubuntu2 libnettle6_3.2-1 libnih-dbus1_1.0.3-4.3ubuntu1 libnih1_1.0.3-4.3ubuntu1 libp11-kit0_0.23.2-3 libpam-modules_1.1.8-3.1ubuntu3 libpam-modules-bin_1.1.8-3.1ubuntu3 libpam-runtime_1.1.8-3.1ubuntu3 libpam0g_1.1.8-3.1ubuntu3 libpcre3_2:8.38-1ubuntu1 libperl5.22_5.22.1-5 libpipeline1_1.4.1-2 libpng12-0_1.2.54-1ubuntu1 libprocps3_1:3.3.9-1ubuntu8 libprocps4_2:3.3.10-4ubuntu2 libreadline6_6.3-8ubuntu2 libroken18-heimdal_1.7~git20150920+dfsg-4ubuntu1 librtmp1_2.4+20151223.gitfa8646d-1 libsasl2-2_2.1.26.dfsg1-14 libsasl2-modules-db_2.1.26.dfsg1-14 libseccomp2_2.2.3-2ubuntu3 libselinux1_2.4-3build1 libsemanage-common_2.4-3build1 libsemanage1_2.4-3build1 libsepol1_2.4-2 libsigsegv2_2.10-4 libslang2_2.3.0-2ubuntu1 libsmartcols1_2.27.1-1ubuntu4 libsqlite3-0_3.10.2-1 libss2_1.42.13-1ubuntu1 libssl1.0.0_1.0.2f-2ubuntu1 libstdc++-5-dev_5.3.1-8ubuntu2 libstdc++6_5.3.1-8ubuntu2 libsystemd0_228-5ubuntu3 libtasn1-6_4.7-3 libtest-pod-perl_1.51-1 libtimedate-perl_2.3000-2 libtinfo5_6.0+20151024-2ubuntu2 libubsan0_5.3.1-8ubuntu2 libudev1_228-5ubuntu3 libunistring0_0.9.3-5.2ubuntu1 libusb-0.1-4_2:0.1.12-28 libustr-1.0-1_1.0.4-5 libuuid1_2.27.1-1ubuntu4 libwind0-heimdal_1.7~git20150920+dfsg-4ubuntu1 libxml2_2.9.3+dfsg1-1 linux-libc-dev_4.4.0-4.19 lockfile-progs_0.1.17 login_1:4.2-3.1ubuntu2 lsb-base_9.20160110 m4_1.4.17-5 make_4.1-5 man-db_2.7.5-1 mawk_1.3.3-17ubuntu2 mount_2.27.1-1ubuntu4 multiarch-support_2.21-0ubuntu5 ncurses-base_6.0+20151024-2ubuntu2 ncurses-bin_6.0+20151024-2ubuntu2 openssl_1.0.2f-2ubuntu1 optipng_0.7.5-1 passwd_1:4.2-3.1ubuntu2 patch_2.7.5-1 perl_5.22.1-5 perl-base_5.22.1-5 perl-modules-5.22_5.22.1-5 pkg-create-dbgsym_0.70 pkgbinarymangler_129 po-debconf_1.0.19 policyrcd-script-zg2_0.1-2 procps_2:3.3.10-4ubuntu2 readline-common_6.3-8ubuntu2 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-libverilog-perl-dummy_0.invalid.0 sed_4.2.2-6.1 sensible-utils_0.0.9 systemd_228-5ubuntu3 systemd-sysv_228-5ubuntu3 sysv-rc_2.88dsf-59.3ubuntu2 sysvinit-utils_2.88dsf-59.3ubuntu2 tar_1.28-2.1 tzdata_2016a-1 ubuntu-keyring_2012.05.19 udev_228-5ubuntu3 util-linux_2.27.1-1ubuntu4 xz-utils_5.1.1alpha+20120614-2ubuntu2 zlib1g_1:1.2.8.dfsg-2ubuntu4 ┌──────────────────────────────────────────────────────────────────────────────┐ │ Build │ └──────────────────────────────────────────────────────────────────────────────┘ Unpack source ───────────── gpgv: Signature made Sun Feb 7 15:50:46 2016 UTC using RSA key ID 8649AA06 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./libverilog-perl_3.418-1.dsc dpkg-source: info: extracting libverilog-perl in libverilog-perl-3.418 dpkg-source: info: unpacking libverilog-perl_3.418.orig.tar.gz dpkg-source: info: unpacking libverilog-perl_3.418-1.debian.tar.xz dpkg-source: info: applying autopkgtest.patch Check disc space ──────────────── Sufficient free space for build User Environment ──────────────── DEB_BUILD_OPTIONS=parallel=24 HOME=/home/buildd LANG=C LOGNAME=buildd MAIL=/var/mail/buildd OLDPWD=/ PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games PWD=/«PKGBUILDDIR» SHELL=/bin/sh SUDO_COMMAND=/usr/sbin/chroot /«CHROOT» su buildd -s /bin/sh -c cd '/«PKGBUILDDIR»' && 'env' SUDO_GID=2501 SUDO_UID=2001 SUDO_USER=buildd TERM=unknown USER=buildd USERNAME=root dpkg-buildpackage ───────────────── dpkg-buildpackage: source package libverilog-perl dpkg-buildpackage: source version 3.418-1 dpkg-buildpackage: source distribution unstable dpkg-source --before-build libverilog-perl-3.418 dpkg-buildpackage: host architecture powerpc fakeroot debian/rules clean dh clean dh_testdir dh_auto_clean dh_clean debian/rules build-arch dh build-arch dh_testdir -a dh_update_autotools_config -a dh_auto_configure -a perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=powerpc-linux-gnu-gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Verilog::Parser Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Verilog::Preproc Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Verilog::Language Writing MYMETA.yml and MYMETA.json dh_auto_build -a make -j1 make[1]: Entering directory '/«PKGBUILDDIR»' cp Netlist/Subclass.pm blib/lib/Verilog/Netlist/Subclass.pm cp EditFiles.pm blib/lib/Verilog/EditFiles.pm cp Netlist/File.pm blib/lib/Verilog/Netlist/File.pm cp Netlist/Module.pm blib/lib/Verilog/Netlist/Module.pm cp Netlist/Pin.pm blib/lib/Verilog/Netlist/Pin.pm cp Netlist/Defparam.pm blib/lib/Verilog/Netlist/Defparam.pm cp Netlist/ModPort.pm blib/lib/Verilog/Netlist/ModPort.pm cp Verilog-Perl.pod blib/lib/Verilog/Verilog-Perl.pod cp Netlist/ContAssign.pm blib/lib/Verilog/Netlist/ContAssign.pm cp Getopt.pm blib/lib/Verilog/Getopt.pm cp Std.pm blib/lib/Verilog/Std.pm cp Netlist/Net.pm blib/lib/Verilog/Netlist/Net.pm cp Netlist/Interface.pm blib/lib/Verilog/Netlist/Interface.pm cp Netlist/Cell.pm blib/lib/Verilog/Netlist/Cell.pm cp Netlist/Port.pm blib/lib/Verilog/Netlist/Port.pm cp Netlist.pm blib/lib/Verilog/Netlist.pm cp Language.pm blib/lib/Verilog/Language.pm cp Netlist/Logger.pm blib/lib/Verilog/Netlist/Logger.pm make[2]: Entering directory '/«PKGBUILDDIR»/Parser' cp SigParser.pm ../blib/lib/Verilog/SigParser.pm cp Parser.pm ../blib/lib/Verilog/Parser.pm "/usr/bin/perl" "/usr/share/perl/5.22.1/ExtUtils/xsubpp" -C++ -typemap "/usr/share/perl/5.22/ExtUtils/typemap" -typemap "typemap" Parser.xs > Parser.xsc && mv Parser.xsc Parser.c rm -rf VParseBison.c VParseBison.cpp bison --version | head -1 bison (GNU Bison) 3.0.4 Note: toolhash ignores VParseBison.output; remove gen/ if you want to debug the grammar Note: If the next command fails, you probably need to install Bison 1.875 or newer "/usr/bin/perl" ../Preproc/toolhash --verbose --name bisonpre --vercmd bison --skip-cmd 1 \ --in VParseBison.y bisonpre \ --out VParseBison.c VParseBison.h \ --cmd "/usr/bin/perl" bisonpre --yacc bison --debug --verbose --d -p VParseBison -k VParseBison.y -o VParseBison.c edit VParseBison.y VParseBison_pretmp.y bison -t -d -k -v --report=itemset --report=lookahead -p VParseBison -b VParseBison_pretmp -o VParseBison_pretmp.c VParseBison_pretmp.y edit VParseBison_pretmp.output VParseBison.output edit VParseBison_pretmp.c VParseBison.c edit VParseBison_pretmp.h VParseBison.h toolhash: Cache hit running bisonpre mv VParseBison.c VParseBison.cpp "/usr/bin/perl" callbackgen callbackgen edited Parser_callbackgen.cpp "/usr/bin/perl" ../Preproc/xsubppfix < Parser.c > Parser_cleaned.cpp g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" Parser_cleaned.cpp Running Mkbootstrap for Verilog::Parser () chmod 644 "Parser.bs" g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" ../Preproc/VFileLine.cpp flex --version flex 2.6.0 "/usr/bin/perl" ../Preproc/toolhash --verbose --in VParseLex.l --out VParseLex_pretmp.cpp --cmd flex -d -oVParseLex_pretmp.cpp VParseLex.l toolhash: Cache hit running flex "/usr/bin/perl" ../Preproc/flexfix VParseLex < VParseLex_pretmp.cpp > VParseLex.cpp g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" VParseLex.cpp g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" VParse.cpp g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" VParseBison.cpp g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" VSymTable.cpp g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" VAst.cpp rm -f ../blib/arch/auto/Verilog/Parser/Parser.so powerpc-linux-gnu-gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong VFileLine.o VParseLex.o VParse.o VParseBison.o VSymTable.o VAst.o -o ../blib/arch/auto/Verilog/Parser/Parser.so Parser_cleaned.o \ -lstdc++ \ chmod 755 ../blib/arch/auto/Verilog/Parser/Parser.so "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Parser.bs ../blib/arch/auto/Verilog/Parser/Parser.bs 644 Manifying 2 pod documents make[2]: Leaving directory '/«PKGBUILDDIR»/Parser' make[2]: Entering directory '/«PKGBUILDDIR»/Preproc' cp Preproc.pm ../blib/lib/Verilog/Preproc.pm "/usr/bin/perl" "/usr/share/perl/5.22.1/ExtUtils/xsubpp" -C++ -typemap "/usr/share/perl/5.22/ExtUtils/typemap" -typemap "typemap" Preproc.xs > Preproc.xsc && mv Preproc.xsc Preproc.c "/usr/bin/perl" ../Preproc/xsubppfix < Preproc.c > Preproc_cleaned.cpp g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" Preproc_cleaned.cpp Running Mkbootstrap for Verilog::Preproc () chmod 644 "Preproc.bs" g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" VFileLine.cpp g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" VPreProc.cpp flex --version flex 2.6.0 "/usr/bin/perl" ../Preproc/toolhash --verbose --in VPreLex.l --out VPreLex_pretmp.cpp --cmd flex -oVPreLex_pretmp.cpp VPreLex.l toolhash: Cache hit running flex "/usr/bin/perl" ../Preproc/flexfix VPreLex < VPreLex_pretmp.cpp > VPreLex.cpp g++ -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I../Preproc -O -g -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"3.418\" -DXS_VERSION=\"3.418\" -fPIC "-I/usr/lib/powerpc-linux-gnu/perl/5.22/CORE" VPreLex.cpp rm -f ../blib/arch/auto/Verilog/Preproc/Preproc.so powerpc-linux-gnu-gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong VFileLine.o VPreProc.o VPreLex.o -o ../blib/arch/auto/Verilog/Preproc/Preproc.so Preproc_cleaned.o \ -lstdc++ \ chmod 755 ../blib/arch/auto/Verilog/Preproc/Preproc.so "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Preproc.bs ../blib/arch/auto/Verilog/Preproc/Preproc.bs 644 Manifying 1 pod document make[2]: Leaving directory '/«PKGBUILDDIR»/Preproc' cp vsplitmodule blib/script/vsplitmodule "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/vsplitmodule cp vppreproc blib/script/vppreproc "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/vppreproc cp vpassert blib/script/vpassert "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/vpassert cp vrename blib/script/vrename "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/vrename cp vhier blib/script/vhier "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/vhier Manifying 4 pod documents Manifying 18 pod documents make[1]: Leaving directory '/«PKGBUILDDIR»' dh_auto_test -a make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/«PKGBUILDDIR»' make[2]: Entering directory '/«PKGBUILDDIR»/Parser' Running Mkbootstrap for Verilog::Parser () chmod 644 "Parser.bs" Manifying 2 pod documents make[2]: Leaving directory '/«PKGBUILDDIR»/Parser' make[2]: Entering directory '/«PKGBUILDDIR»/Preproc' Running Mkbootstrap for Verilog::Preproc () chmod 644 "Preproc.bs" Manifying 1 pod document make[2]: Leaving directory '/«PKGBUILDDIR»/Preproc' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_pod.t ........... 1..26 ok 1 - POD test for blib/lib/Verilog/Std.pm ok 2 - POD test for blib/lib/Verilog/Preproc.pm ok 3 - POD test for blib/lib/Verilog/Language.pm ok 4 - POD test for blib/lib/Verilog/Verilog-Perl.pod ok 5 - POD test for blib/lib/Verilog/Getopt.pm ok 6 - POD test for blib/lib/Verilog/SigParser.pm ok 7 - POD test for blib/lib/Verilog/Netlist.pm ok 8 - POD test for blib/lib/Verilog/Parser.pm ok 9 - POD test for blib/lib/Verilog/EditFiles.pm ok 10 - POD test for blib/lib/Verilog/Netlist/Pin.pm ok 11 - POD test for blib/lib/Verilog/Netlist/Logger.pm ok 12 - POD test for blib/lib/Verilog/Netlist/File.pm ok 13 - POD test for blib/lib/Verilog/Netlist/Defparam.pm ok 14 - POD test for blib/lib/Verilog/Netlist/Subclass.pm ok 15 - POD test for blib/lib/Verilog/Netlist/ContAssign.pm ok 16 - POD test for blib/lib/Verilog/Netlist/Net.pm ok 17 - POD test for blib/lib/Verilog/Netlist/Module.pm ok 18 - POD test for blib/lib/Verilog/Netlist/Cell.pm ok 19 - POD test for blib/lib/Verilog/Netlist/Interface.pm ok 20 - POD test for blib/lib/Verilog/Netlist/ModPort.pm ok 21 - POD test for blib/lib/Verilog/Netlist/Port.pm ok 22 - POD test for blib/script/vpassert ok 23 - POD test for blib/script/vrename ok 24 - POD test for blib/script/vhier ok 25 - POD test for blib/script/vppreproc ok 26 - POD test for blib/script/vsplitmodule (no pod) ok t/01_manifest.t ...... 1..1 # Running under perl version 5.022001 for linux # Current time local: Sun Feb 7 23:31:54 2016 # Current time GMT: Sun Feb 7 23:31:54 2016 # Using Test.pm version 1.26 ok 1 # skip author only test (harmless) ok t/02_help.t .......... 1..15 Doc test of: blib/script/vhier ok 1 - exe exists: blib/script/vhier ok 2 - help result for: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib blib/script/vhier --help 2>&1 ok 3 - version result for: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib blib/script/vhier --version 2>&1 Doc test of: blib/script/vpassert ok 4 - exe exists: blib/script/vpassert ok 5 - help result for: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib blib/script/vpassert --help 2>&1 ok 6 - version result for: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib blib/script/vpassert --version 2>&1 Doc test of: blib/script/vppreproc ok 7 - exe exists: blib/script/vppreproc ok 8 - help result for: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib blib/script/vppreproc --help 2>&1 ok 9 - version result for: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib blib/script/vppreproc --version 2>&1 Doc test of: blib/script/vrename ok 10 - exe exists: blib/script/vrename ok 11 - help result for: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib blib/script/vrename --help 2>&1 ok 12 - version result for: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib blib/script/vrename --version 2>&1 Doc test of: blib/script/vsplitmodule ok 13 - exe exists: blib/script/vsplitmodule ok 14 # skip vsplitmodule is only example (harmless) ok 15 # skip vsplitmodule is only example (harmless) ok t/03_spaces.t ........ 1..180 # Running under perl version 5.022001 for linux # Current time local: Sun Feb 7 23:31:55 2016 # Current time GMT: Sun Feb 7 23:31:55 2016 # Using Test.pm version 1.26 ok 1 Space test of: .gitignore ok 2 Space test of: COPYING ok 3 Space test of: Changes ok 4 Space test of: EditFiles.pm ok 5 Space test of: Getopt.pm ok 6 Space test of: Language.pm ok 7 Space test of: MANIFEST ok 8 Space test of: MANIFEST.SKIP ok 9 Space test of: META.yml ok 10 Space test of: Makefile.PL ok 11 Space test of: Netlist.pm ok 12 Space test of: Netlist/Cell.pm ok 13 Space test of: Netlist/ContAssign.pm ok 14 Space test of: Netlist/Defparam.pm ok 15 Space test of: Netlist/File.pm ok 16 Space test of: Netlist/Interface.pm ok 17 Space test of: Netlist/Logger.pm ok 18 Space test of: Netlist/ModPort.pm ok 19 Space test of: Netlist/Module.pm ok 20 Space test of: Netlist/Net.pm ok 21 Space test of: Netlist/Pin.pm ok 22 Space test of: Netlist/Port.pm ok 23 Space test of: Netlist/Subclass.pm ok 24 Space test of: Parser/.gitignore ok 25 Space test of: Parser/Makefile.PL ok 26 Space test of: Parser/Parser.pm ok 27 Space test of: Parser/Parser.xs ok 28 Space test of: Parser/SigParser.pm ok 29 Space test of: Parser/VAst.cpp ok 30 Space test of: Parser/VAst.h ok 31 Space test of: Parser/VParse.cpp ok 32 Space test of: Parser/VParse.h ok 33 Space test of: Parser/VParseBison.y ok 34 Space test of: Parser/VParseGrammar.h ok 35 Space test of: Parser/VParseLex.h ok 36 Space test of: Parser/VParseLex.l ok 37 Space test of: Parser/VSymTable.cpp ok 38 Space test of: Parser/VSymTable.h ok 39 Space test of: Parser/bisonpre ok 40 Space test of: Parser/callbackgen ok 41 Space test of: Parser/gen/bisonpre-0 ok 42 Space test of: Parser/gen/bisonpre-1 ok 43 # skip File doesn't need check (harmless) Space test of: Parser/gen/bisonpre-2 ok 44 # skip File doesn't need check (harmless) Space test of: Parser/gen/bisonpre-s ok 45 Space test of: Parser/gen/flex-0 ok 46 Space test of: Parser/gen/flex-1 ok 47 # skip File doesn't need check (harmless) Space test of: Parser/typemap ok 48 Space test of: Preproc/.gitignore ok 49 Space test of: Preproc/Makefile.PL ok 50 Space test of: Preproc/Preproc.pm ok 51 Space test of: Preproc/Preproc.xs ok 52 Space test of: Preproc/VFileLine.cpp ok 53 Space test of: Preproc/VFileLine.h ok 54 Space test of: Preproc/VPreLex.h ok 55 Space test of: Preproc/VPreLex.l ok 56 Space test of: Preproc/VPreProc.cpp ok 57 Space test of: Preproc/VPreProc.h ok 58 Space test of: Preproc/flexfix ok 59 Space test of: Preproc/gen/flex-0 ok 60 Space test of: Preproc/gen/flex-1 ok 61 # skip File doesn't need check (harmless) Space test of: Preproc/toolhash ok 62 Space test of: Preproc/typemap ok 63 Space test of: Preproc/xsubppfix ok 64 ok 65 # skip File doesn't need check (harmless) Space test of: Std.pm ok 66 Space test of: Verilog-Perl.pod ok 67 Space test of: t/00_pod.t ok 68 Space test of: t/01_manifest.t ok 69 Space test of: t/02_help.t ok 70 Space test of: t/03_spaces.t ok 71 Space test of: t/04_critic.t ok 72 Space test of: t/05_yaml.t ok 73 Space test of: t/10_keywords.t ok 74 Space test of: t/12_splitbus.t ok 75 Space test of: t/14_numbers.t ok 76 Space test of: t/16_std.t ok 77 Space test of: t/20_getopt.opt ok 78 Space test of: t/20_getopt.t ok 79 Space test of: t/30_preproc.out ok 80 # skip File doesn't need check (harmless) Space test of: t/30_preproc.t ok 81 Space test of: t/30_preproc_nows.out ok 82 # skip File doesn't need check (harmless) Space test of: t/30_preproc_on.out ok 83 # skip File doesn't need check (harmless) Space test of: t/30_preproc_sub.out ok 84 # skip File doesn't need check (harmless) Space test of: t/30_preproc_syn.out ok 85 # skip File doesn't need check (harmless) Space test of: t/32_noinc.t ok 86 Space test of: t/32_noinc.v ok 87 Space test of: t/33_gzip.t ok 88 Space test of: t/34_parser.out ok 89 # skip File doesn't need check (harmless) Space test of: t/34_parser.t ok 90 Space test of: t/35_sigparser.out ok 91 Space test of: t/35_sigparser.t ok 92 Space test of: t/36_sigmany.t ok 93 Space test of: t/40_netlist.t ok 94 Space test of: t/41_example.t ok 95 Space test of: t/42_dumpcheck.t ok 96 Space test of: t/42_dumpcheck_1.out ok 97 Space test of: t/42_dumpcheck_1v.out ok 98 Space test of: t/42_dumpcheck_2.out ok 99 Space test of: t/42_dumpcheck_2e.out ok 100 Space test of: t/42_dumpcheck_2v.out ok 101 Space test of: t/42_dumpcheck_sv.out ok 102 Space test of: t/42_dumpcheck_v2k.out ok 103 Space test of: t/42_dumpcheck_v2kv.out ok 104 Space test of: t/44_create.t ok 105 Space test of: t/46_link.t ok 106 Space test of: t/48_leak.t ok 107 Space test of: t/49_largeish.t ok 108 Space test of: t/50_vrename.out ok 109 # skip File doesn't need check (harmless) Space test of: t/50_vrename.t ok 110 Space test of: t/51_vrename_kwd.t ok 111 Space test of: t/51_vrename_kwd.v ok 112 Space test of: t/51_vrename_kwd_chg.out ok 113 Space test of: t/51_vrename_kwd_chg2.out ok 114 Space test of: t/51_vrename_kwd_chg2.vrename ok 115 Space test of: t/51_vrename_kwd_list.out ok 116 Space test of: t/56_editfiles.t ok 117 Space test of: t/56_editfiles.v ok 118 Space test of: t/56_editfiles_a.out ok 119 Space test of: t/56_editfiles_b.out ok 120 Space test of: t/56_editfiles_edit.out ok 121 Space test of: t/58_vsplitmodule.t ok 122 Space test of: t/60_vpassert.out ok 123 # skip File doesn't need check (harmless) Space test of: t/60_vpassert.t ok 124 Space test of: t/80_vppreproc.t ok 125 Space test of: t/80_vppreproc_cmped.out ok 126 # skip File doesn't need check (harmless) Space test of: t/80_vppreproc_defines.out ok 127 # skip File doesn't need check (harmless) Space test of: t/80_vppreproc_none.out ok 128 # skip File doesn't need check (harmless) Space test of: t/80_vppreproc_rel_file.out ok 129 # skip File doesn't need check (harmless) Space test of: t/80_vppreproc_simple.out ok 130 Space test of: t/85_vhier.t ok 131 Space test of: t/85_vhier_cells.out ok 132 Space test of: t/85_vhier_forest.out ok 133 Space test of: t/85_vhier_inpfiles.out ok 134 Space test of: t/85_vhier_modfiles.out ok 135 Space test of: t/85_vhier_resolvefiles.out ok 136 Space test of: t/85_vhier_topmodule.out ok 137 Space test of: t/85_vhier_xml.out ok 138 Space test of: t/86_vhier_tick.t ok 139 Space test of: t/test_utils.pl ok 140 Space test of: verilog/example.v ok 141 Space test of: verilog/inc1.v ok 142 Space test of: verilog/inc2.v ok 143 Space test of: verilog/inc_def09.v ok 144 Space test of: verilog/inc_ifdef.v ok 145 Space test of: verilog/inc_nonl.v ok 146 Space test of: verilog/parser_bugs.v ok 147 Space test of: verilog/parser_sv.v ok 148 Space test of: verilog/parser_sv09.v ok 149 Space test of: verilog/pinorder.v ok 150 Space test of: verilog/pli.v ok 151 Space test of: verilog/t_80_bar/bar.f ok 152 Space test of: verilog/t_80_bar/bar.v ok 153 Space test of: verilog/t_80_foo.f ok 154 Space test of: verilog/t_80_foo.v ok 155 Space test of: verilog/t_86_vhier_tick.v ok 156 Space test of: verilog/t_86_vhier_tick_sub.v ok 157 Space test of: verilog/t_preproc_inc3.vh ok 158 Space test of: verilog/t_preproc_inc4.vh ok 159 Space test of: verilog/test.v ok 160 Space test of: verilog/test.vrename ok 161 Space test of: verilog/v_comments.v ok 162 Space test of: verilog/v_gate.v ok 163 Space test of: verilog/v_hier_noport.v ok 164 Space test of: verilog/v_hier_sub.v ok 165 Space test of: verilog/v_hier_subprim.v ok 166 Space test of: verilog/v_hier_subsub.v ok 167 Space test of: verilog/v_hier_top.v ok 168 Space test of: verilog/v_hier_top2.v ok 169 Space test of: verilog/v_recursive.v ok 170 Space test of: verilog/v_sv_intf.v ok 171 Space test of: verilog/v_sv_mod.v ok 172 Space test of: verilog/v_sv_pgm.v ok 173 Space test of: verilog/v_sv_pkg.v ok 174 Space test of: verilog/v_v2k.v ok 175 Space test of: vhier ok 176 Space test of: vpassert ok 177 Space test of: vppreproc ok 178 Space test of: vrename ok 179 Space test of: vsplitmodule ok 180 ok t/04_critic.t ........ 1..1 # Running under perl version 5.022001 for linux # Current time local: Sun Feb 7 23:31:56 2016 # Current time GMT: Sun Feb 7 23:31:56 2016 # Using Test.pm version 1.26 ok 1 # skip author only test (harmless) ok t/05_yaml.t .......... 1..1 # Running under perl version 5.022001 for linux # Current time local: Sun Feb 7 23:31:56 2016 # Current time GMT: Sun Feb 7 23:31:56 2016 # Using Test.pm version 1.26 ok 1 # skip author only test (harmless) ok t/10_keywords.t ...... 1..25 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 - language_maximum ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok t/12_splitbus.t ...... 1..5 ok 1 - use ok 2 ok 3 ok 4 ok 5 ok t/14_numbers.t ....... 1..32 ok 1 - use ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 Bit::Vector 5823 -> got 32 000016bf =? exp 32 exp 000016bf ok 13 - number of bits ok 14 - value 80'h47cb_40d7_b50f_0147_1a85 -> got 80 47cb40d7b50f01471a85 =? exp 80 exp 47cb40d7b50f01471a85 ok 15 - number of bits ok 16 - value 83'o227525534413441101057616251 -> got 83 097aad721721208bf1ca9 =? exp 83 exp 097aad721721208bf1ca9 ok 17 - number of bits ok 18 - value 70'b1011010111111001010111111111111001110000011000101110010100110101101101 -> got 70 2d7e57ff9c18b94d6d =? exp 70 exp 2d7e57ff9c18b94d6d ok 19 - number of bits ok 20 - value 90'd46548__4046747316__6145438700 -> got 90 003d9b368496d10ab0043ec =? exp 90 exp 003d9b368496d10ab0043ec ok 21 - number of bits ok 22 - value Math::BigInt ok 23 # skip Math::BigInt not installed (harmless) ok 24 # skip Math::BigInt not installed (harmless) ok 25 # skip Math::BigInt not installed (harmless) ok 26 # skip Math::BigInt not installed (harmless) ok 27 # skip Math::BigInt not installed (harmless) ok 28 # skip Math::BigInt not installed (harmless) ok 29 # skip Math::BigInt not installed (harmless) ok 30 # skip Math::BigInt not installed (harmless) ok 31 # skip Math::BigInt not installed (harmless) ok 32 # skip Math::BigInt not installed (harmless) ok t/16_std.t ........... 1..3 ok 1 - use ok 2 ok 3 ok t/20_getopt.t ........ 1..15 ok 1 - use ok 2 - new ok 3 parameter(+libext+t) libext t parameter(+incdir+t) incdir t parameter(+define+foo=bar) Define foo = bar parameter(+define+foo2) Define foo2 = parameter(+define+foo3=3+foo4) Define foo3 = 3 Define foo4 = parameter(-v) parameter(libdir) library libdir parameter(-y) parameter(moddir) module_dir moddir parameter(-Dbaz=bar) Define baz = bar parameter(-Iincdir2) incdir incdir2 parameter(-f) parameter($DOT/t/20_getopt.opt) *parameter_file ./t/20_getopt.opt parameter(-Dread_opt_file=1) Define read_opt_file = 1 parameter(-y) parameter(y_library_path) module_dir y_library_path parameter(-F) parameter($DOT/t/20_getopt.opt) *parameter_file ./t/20_getopt.opt parameter(-Dread_opt_file=1) Define read_opt_file = 1 parameter(-y) parameter(y_library_path) module_dir t/y_library_path parameter(passthru) passthru ok 4 ok 5 depend_files t/20_getopt.t fp t/20_getopt.t ok 6 OUT: +define+baz=bar +define+foo=bar +define+foo2 +define+foo3=3 +define+foo4 +define+read_opt_file=1 +libext+.v+t +incdir+. +incdir+t +incdir+incdir2 -y . -y moddir -y y_library_path -y t/y_library_path -v libdir ok 7 parameter(+define+baz=bar) Define baz = bar parameter(+define+foo=bar) Define foo = bar parameter(+define+foo2) Define foo2 = parameter(+define+foo3=3) Define foo3 = 3 parameter(+define+foo4) Define foo4 = parameter(+define+read_opt_file=1) Define read_opt_file = 1 parameter(+libext+.v+t) libext .v libext t parameter(+incdir+.) incdir . parameter(+incdir+t) incdir t parameter(+incdir+incdir2) incdir incdir2 parameter(-y) parameter(.) module_dir . parameter(-y) parameter(moddir) module_dir moddir parameter(-y) parameter(y_library_path) module_dir y_library_path parameter(-y) parameter(t/y_library_path) module_dir t/y_library_path parameter(-v) parameter(libdir) library libdir LEFT: LEFT: +define+baz=bar +define+foo=bar +define+foo2 +define+foo3=3 +define+foo4 +define+read_opt_file=1 +libext+.v+t +incdir+. +incdir+t +incdir+incdir2 -y . -y moddir -y y_library_path -y t/y_library_path -v libdir ok 8 parameter(+libext+t) parameter(+incdir+t) parameter(+define+foo=bar) parameter(+define+foo2) parameter(+define+foo3=3+foo4) parameter(-v) parameter(libdir) parameter(-y) parameter(moddir) parameter(-Dbaz=bar) Define baz = bar parameter(-Iincdir2) incdir incdir2 parameter(-f) parameter($DOT/t/20_getopt.opt) *parameter_file ./t/20_getopt.opt parameter(-Dread_opt_file=1) Define read_opt_file = 1 parameter(-y) parameter(y_library_path) parameter(-F) parameter($DOT/t/20_getopt.opt) *parameter_file ./t/20_getopt.opt parameter(-Dread_opt_file=1) Define read_opt_file = 1 parameter(-y) parameter(y_library_path) parameter(passthru) LEFT: +libext+t +incdir+t +define+foo=bar +define+foo2 +define+foo3=3+foo4 -v libdir -y moddir -y y_library_path -y y_library_path passthru ok 9 parameter(+libext+t) libext t parameter(+incdir+t) incdir t parameter(+define+foo=bar) Define foo = bar parameter(+define+foo2) Define foo2 = parameter(+define+foo3=3+foo4) Define foo3 = 3 Define foo4 = parameter(-v) parameter(libdir) library libdir parameter(-y) parameter(moddir) module_dir moddir parameter(-Dbaz=bar) parameter(-Iincdir2) parameter(-f) parameter($DOT/t/20_getopt.opt) *parameter_file ./t/20_getopt.opt parameter(-Dread_opt_file=1) parameter(-y) parameter(y_library_path) module_dir y_library_path parameter(-F) parameter($DOT/t/20_getopt.opt) *parameter_file ./t/20_getopt.opt parameter(-Dread_opt_file=1) parameter(-y) parameter(y_library_path) module_dir t/y_library_path parameter(passthru) LEFT: -Dbaz=bar -Iincdir2 -Dread_opt_file=1 -Dread_opt_file=1 passthru ok 10 parameter(+define+foo=bar) Define foo = bar parameter(+define+foo=baz) Define foo = baz ok 11 incdir ARRAY(0x109061f8) module_dir ARRAY(0x109062d0) ok 12 ok 13 ok 14 ok 15 ok t/30_preproc.t ....... 1..19 ok 1 - use Verilog::Getopt ok 2 - use Verilog::Preproc ok 3 - new ok 4 - parsed ok 5 - diff ok 6 - new_on ok 7 - parsed_on ok 8 - diff_on ok 9 - new_syn ok 10 - parsed_syn ok 11 - diff_syn ok 12 - new_nows ok 13 - parsed_nows ok 14 - diff_nows ok 15 - new_sub ok 16 - parsed_sub ok 17 - diff_sub ok 18 ok 19 - getall does same callbacks ok t/32_noinc.t ......... 1..7 ok 1 - use ok 2 - new ok 3 - open ok 4 ok 5 - new ok 6 - open ok 7 ok t/33_gzip.t .......... 1..4 ok 1 - use ok 2 - gzip test creation ok 3 - open ok 4 - decompress found text ok t/34_parser.t ........ 1..7 ok 1 - use ok 2 - new ok 3 - selftest ok 4 ok 5 ok 6 - diff ok 7 - coverage ok t/35_sigparser.t ..... 1..4 ok 1 - use ok 2 - read ok 3 - diff ok 4 - coverage ok t/36_sigmany.t ....... 1..3 # Running under perl version 5.022001 for linux # Current time local: Sun Feb 7 23:31:56 2016 # Current time GMT: Sun Feb 7 23:31:56 2016 # Using Test.pm version 1.26 ok 1 ok 2 # skip VERILOG_TEST_FILES not set (harmless) ====================================================================== read verilog/example.v ====================================================================== read verilog/parser_bugs.v ====================================================================== read verilog/parser_sv.v ====================================================================== read verilog/parser_sv09.v ====================================================================== read verilog/pinorder.v ====================================================================== read verilog/pli.v ====================================================================== read verilog/t_80_foo.v ====================================================================== read verilog/t_86_vhier_tick.v ====================================================================== read verilog/t_86_vhier_tick_sub.v ====================================================================== read verilog/test.v ====================================================================== read verilog/v_comments.v ====================================================================== read verilog/v_gate.v ====================================================================== read verilog/v_hier_noport.v ====================================================================== read verilog/v_hier_sub.v ====================================================================== read verilog/v_hier_subprim.v ====================================================================== read verilog/v_hier_subsub.v ====================================================================== read verilog/v_hier_top.v ====================================================================== read verilog/v_hier_top2.v ====================================================================== read verilog/v_recursive.v ====================================================================== read verilog/v_sv_intf.v ====================================================================== read verilog/v_sv_mod.v ====================================================================== read verilog/v_sv_pgm.v ====================================================================== read verilog/v_sv_pkg.v ====================================================================== read verilog/v_v2k.v ok 3 ok t/40_netlist.t ....... 1..17 ok 1 - use Level tests ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok t/41_example.t ....... 1..2 ok 1 - use Checking example in Netlist.pm Dump Module:$root Kwd:root_module File:verilog/v_hier_top.v Net:GLOBAL_PARAM DeclT:localparam NetT: DataT: Array: Value:1 Module:v_hier_noport Kwd:module File:verilog/v_hier_noport.v Net:internal DeclT:var NetT: DataT:reg Array: Module:v_hier_sub Kwd:module File:verilog/v_hier_sub.v Port:avec Dir:in DataT:[3:0] Array: Port:clk Dir:in DataT: Array: Port:qvec Dir:out DataT:[3:0] Array: Net:FROM_DEFPARAM DeclT:parameter NetT: DataT: Array: Value:1 Net:K DeclT:genvar NetT: DataT: Array: Net:K_UNUSED DeclT:genvar NetT: DataT: Array: Net:a1 I DeclT:net NetT:supply1 DataT: Array: Net:avec O DeclT:port NetT: DataT:[3:0] Array: 3:0 Net:clk O DeclT:port NetT: DataT: Array: Net:qvec I DeclT:port NetT: DataT:[3:0] Array: 3:0 Cell:subsub0 is-a:v_hier_subsub .IGNORED('sh20) Module:v_hier_subsub Kwd:module File:verilog/v_hier_subsub.v Pin:a Net:a1 Port:a Dir:in DataT:signed Array: Net:a1 I DeclT:net NetT:supply1 DataT: Array: Pin:q Net:qvec[0] Port:q Dir:out DataT: Array: Cell:subsub2 is-a:v_hier_subsub Module:v_hier_subsub Kwd:module File:verilog/v_hier_subsub.v Pin:a Net:1'b0 Port:a Dir:in DataT:signed Array: Pin:q Net:qvec[2] Port:q Dir:out DataT: Array: Module:v_hier_subsub Kwd:module File:verilog/v_hier_subsub.v Port:a Dir:in DataT:signed Array: Port:q Dir:out DataT: Array: Net:IGNORED DeclT:parameter NetT: DataT: Array: Value:0 Net:a O DeclT:port NetT: DataT:signed Array: Net:q I DeclT:port NetT:wire DataT: Array: Module:v_hier_top Kwd:module File:verilog/v_hier_top.v Port:clk Dir:in DataT: Array: Net:WC_p1 DeclT:localparam NetT: DataT:[0:0] Array: 0:0 Value:0 Net:WC_p3 DeclT:localparam NetT: DataT:[2:0] Array: 2:0 Value:0 Net:WC_p32 DeclT:localparam NetT: DataT: Array: Value:0 Net:WC_p4 DeclT:localparam NetT: DataT:[-1:2] Array: -1:2 Value:0 Net:WC_pint DeclT:localparam NetT: DataT:integer Array: Value:0 Net:WC_w1 DeclT:net NetT:wire DataT: Array: Net:WC_w1b DeclT:net NetT:wire DataT:[0:0] Array: 0:0 Net:WC_w3 DeclT:net NetT:wire DataT:[2:0] Array: 2:0 Net:WC_w4 DeclT:net NetT:wire DataT:[-1:2] Array: -1:2 Net:asn_clk DeclT:net NetT:wire DataT: Array: Net:clk O DeclT:port NetT: DataT: Array: Cell:missing is-a:missing Cell:recursive is-a:v_recursive .DEPTH(3) Module:v_recursive Kwd:module File:verilog/v_recursive.v Cell:sub is-a:v_hier_sub Module:v_hier_sub Kwd:module File:verilog/v_hier_sub.v Pin:avec Net:{avec[3],avec[2:0]} Port:avec Dir:in DataT:[3:0] Array: Pin:clk Net:1'b0 Port:clk Dir:in DataT: Array: Pin:qvec Net:qvec[3:0] Port:qvec Dir:out DataT:[3:0] Array: Defparam:defparam lhs:sub.FROM_DEFPARAM rhs:2 ContAssign:assign lhs:asn_clk rhs:clk Module:v_hier_top2 Kwd:module File:verilog/v_hier_top2.v Port:clk Dir:in DataT: Array: Port:iosig Dir:inout DataT:[2:0] Array: Net:clk O DeclT:port NetT: DataT: Array: Net:iosig DeclT:port NetT: DataT:[2:0] Array: 2:0 Cell:noport is-a:v_hier_noport Module:v_hier_noport Kwd:module File:verilog/v_hier_noport.v Module:v_recursive Kwd:module File:verilog/v_recursive.v Net:DEPTH DeclT:parameter NetT: DataT: Array: Value:1 Cell:recurse is-a:v_recursive .DEPTH(DEPTH-1) Module:v_recursive Kwd:module File:verilog/v_recursive.v ok 2 - done ok t/42_dumpcheck.t ..... 1..14 ok 1 - use Dump ok 2 ok 3 ok 4 Dump ok 5 ok 6 ok 7 Dump ok 8 ok 9 ok 10 Edit tests ok 11 ok 12 Dump ok 13 ok 14 ok t/44_create.t ........ 1..2 ok 1 - use module a ( x, y); b i_b (.w(y), .z(x)); endmodule ok 2 - done ok t/46_link.t .......... 1..2 ok 1 - use Dump Module:buffer Kwd:module File:verilog/v_gate.v Port:A Dir:in DataT: Array: Port:Z Dir:out DataT: Array: Net:A O DeclT:port NetT: DataT: Array: Net:Z I DeclT:port NetT: DataT: Array: Cell:u_buf is-a:buf Pin:pin1 Net:Z Net:Z I DeclT:port NetT: DataT: Array: Pin:pin2 Net:A Net:A O DeclT:port NetT: DataT: Array: Module:gate Kwd:module File:verilog/v_gate.v Port:A Dir:in DataT: Array: Port:Z Dir:out DataT: Array: Net:A IO DeclT:port NetT: DataT: Array: Net:Z IO DeclT:port NetT: DataT: Array: Cell:u_buf is-a:buffer Module:buffer Kwd:module File:verilog/v_gate.v Pin:A Net:A Port:A Dir:in DataT: Array: Net:A IO DeclT:port NetT: DataT: Array: Pin:Z Net:Z Port:Z Dir:out DataT: Array: Net:Z IO DeclT:port NetT: DataT: Array: ok 2 - done ok t/48_leak.t .......... 1..2 # Running under perl version 5.022001 for linux # Current time local: Sun Feb 7 23:31:57 2016 # Current time GMT: Sun Feb 7 23:31:57 2016 # Using Test.pm version 1.26 0: Memory 15.086 MB Alloced 0.359 MB ok 1 ok 2 ok t/49_largeish.t ...... 1..4 Wrote test_dir/largeish_1.v: 0.000 MB Wrote test_dir/largeish_2.v: 0.031 MB Wrote test_dir/largeish_3.v: 0.359 MB For sigparser test_dir/largeish_2.v: File 0.036 MB, 0.024 s, 16.211 MB, Alloced 0.465 MB, 12.8 Alloc/FileB 0.7 s/MB For sigparser test_dir/largeish_3.v: File 0.362 MB, 0.238 s, 18.438 MB, Alloced 2.691 MB, 7.4 Alloc/FileB 0.7 s/MB ok 1 - run complete ok 2 - complexity For netlist test_dir/largeish_2.v: File 0.036 MB, 0.056 s, 17.238 MB, Alloced -1.199 MB, -33.0 Alloc/FileB 1.6 s/MB For netlist test_dir/largeish_3.v: File 0.362 MB, 0.583 s, 28.820 MB, Alloced 10.383 MB, 28.6 Alloc/FileB 1.6 s/MB ok 3 - run complete ok 4 - complexity ok t/50_vrename.t ....... 1..6 Checking vrename... /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vrename -changefile=test_dir/signals.vrename -list -xref verilog/test.v parse file verilog/test.v Wrote test_dir/signals.vrename (Changes list, 5 signals) ok 1 - vrename list ok 2 - diff /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vrename -change --changefile verilog/test.vrename -o test_dir verilog/test.v Read verilog/test.vrename Wrote verilog/test.v (3 signals matched) ok 3 - vrename change ok 4 - diff /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vrename -changefile=test_dir/signals.vrename -list --crypt -o test_dir verilog/test.v parse file verilog/test.v Wrote test_dir/signals.vrename (Changes list, 5 signals) /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vrename -changefile=test_dir/signals.vrename -change --crypt -o test_dir verilog/test.v Read test_dir/signals.vrename Encrypted verilog/test.v (1 signals matched) ok 5 - vrename crypt ok 6 - output exists ok t/51_vrename_kwd.t ... 1..6 Checking vrename... /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vrename -changefile=test_dir/51_vrename_kwd_list.vrename -list --changelang --language 1364-1995 t/51_vrename_kwd.v parse file t/51_vrename_kwd.v Wrote test_dir/51_vrename_kwd_list.vrename (Changes list, 6 signals) ok 1 - vrename list ok 2 - diff /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vrename -change --changefile=test_dir/51_vrename_kwd_list.vrename -o test_dir t/51_vrename_kwd.v Read test_dir/51_vrename_kwd_list.vrename Wrote t/51_vrename_kwd.v (1 signals matched) ok 3 - vrename change same ok 4 - diff /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vrename -change --changefile=t/51_vrename_kwd_chg2.vrename -o test_dir t/51_vrename_kwd.v Read t/51_vrename_kwd_chg2.vrename Wrote t/51_vrename_kwd.v (1 signals matched) ok 5 - vrename change ok 6 - diff ok t/56_editfiles.t ..... 1..9 ok 1 ok 2 - new test_dir/56_editfiles.v (Changed) ok 3 - edit_file ok 4 - diff Reading t/56_editfiles.v... ok 5 - read_and_split Writing test_dir/editout/a.v... Writing test_dir/editout/b.v... ok 6 - write_files ok 7 - diff ok 8 - diff Writing test_dir/editout/0LINT.sh... ok 9 - write_lint ok t/58_vsplitmodule.t .. 1..2 Checking vsplitmodule... /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vsplitmodule Reading t/32_noinc.v... Reading t/51_vrename_kwd.v... Reading t/56_editfiles.v... Writing test_dir/32_noinc.v... Writing test_dir/51_vrename_kwd.v... Writing test_dir/a.v... Writing test_dir/b.v... Writing test_dir/0LINT.sh... ok 1 - vsplitmodule ok 2 - vsplitmodule output ok t/60_vpassert.t ...... 1..6 Checking vpassert... /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vpassert --minimum --nostop --date --axiom --verilator --vcs --synthcov -o test_dir/.vpassert -y verilog/ VPASSERT (or overall flags) changed... Two minutes... VPASSERT'ing file (1) verilog/inc_nonl.v (New) (no-output) VPASSERT'ing file (2) verilog/v_sv_pgm.v (New) (no-output) VPASSERT'ing file (3) verilog/v_sv_mod.v (New) (no-output) VPASSERT'ing file (4) verilog/example.v (New) VPASSERT'ing file (5) verilog/v_hier_top2.v (New) (no-output) VPASSERT'ing file (6) verilog/v_hier_subprim.v (New) (no-output) VPASSERT'ing file (7) verilog/parser_sv09.v (New) (no-output) VPASSERT'ing file (8) verilog/inc_def09.v (New) (no-output) VPASSERT'ing file (9) verilog/t_80_foo.v (New) (no-output) VPASSERT'ing file (10) verilog/parser_bugs.v (New) (no-output) VPASSERT'ing file (11) verilog/v_comments.v (New) (no-output) VPASSERT'ing file (12) verilog/v_sv_pkg.v (New) (no-output) VPASSERT'ing file (13) verilog/inc_ifdef.v (New) (no-output) VPASSERT'ing file (14) verilog/t_86_vhier_tick_sub.v (New) (no-output) VPASSERT'ing file (15) verilog/v_v2k.v (New) (no-output) VPASSERT'ing file (16) verilog/v_hier_sub.v (New) (no-output) VPASSERT'ing file (17) verilog/parser_sv.v (New) (no-output) VPASSERT'ing file (18) verilog/test.v (New) (no-output) VPASSERT'ing file (19) verilog/v_hier_top.v (New) (no-output) VPASSERT'ing file (20) verilog/v_recursive.v (New) (no-output) VPASSERT'ing file (21) verilog/t_86_vhier_tick.v (New) (no-output) VPASSERT'ing file (22) verilog/v_hier_noport.v (New) (no-output) VPASSERT'ing file (23) verilog/v_gate.v (New) (no-output) VPASSERT'ing file (24) verilog/pli.v (New) VPASSERT'ing file (25) verilog/v_hier_subsub.v (New) (no-output) VPASSERT'ing file (26) verilog/pinorder.v (New) (no-output) VPASSERT'ing file (27) verilog/v_sv_intf.v (New) (no-output) VPASSERT'ing file (28) verilog/inc2.v (New) (no-output) VPASSERT'ing file (29) verilog/inc1.v (New) (no-output) VPASSERT generated 29 new file(s) ok 1 - vpassert ran ok 2 - pli.v created Line count: inc1.v: 548 =? 548 Line count: inc2.v: 5 =? 5 Line count: inc_def09.v: 72 =? 72 Line count: inc_ifdef.v: 39 =? 39 Line count: inc_nonl.v: 1 =? 1 Line count: parser_bugs.v: 512 =? 512 Line count: parser_sv.v: 418 =? 418 Line count: parser_sv09.v: 37 =? 37 Line count: pinorder.v: 50 =? 50 Line count: t_80_foo.v: 9 =? 9 Line count: t_86_vhier_tick.v: 9 =? 9 Line count: t_86_vhier_tick_sub.v: 5 =? 5 Line count: test.v: 28 =? 28 Line count: v_comments.v: 33 =? 33 Line count: v_gate.v: 10 =? 10 Line count: v_hier_noport.v: 6 =? 6 Line count: v_hier_sub.v: 40 =? 40 Line count: v_hier_subprim.v: 35 =? 35 Line count: v_hier_subsub.v: 14 =? 14 Line count: v_hier_top.v: 45 =? 45 Line count: v_hier_top2.v: 14 =? 14 Line count: v_recursive.v: 7 =? 7 Line count: v_sv_intf.v: 14 =? 14 Line count: v_sv_mod.v: 21 =? 21 Line count: v_sv_pgm.v: 6 =? 6 Line count: v_sv_pkg.v: 11 =? 11 Line count: v_v2k.v: 20 =? 20 ok 3 - lines output ok 4 - diff output /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vpassert --date --verilator --vcs --call-error '$callError' --call-info '$callInfo' --call-warn '$callWarn' -o test_dir/.vpassertcall -y verilog/ VPASSERT (or overall flags) changed... Two minutes... VPASSERT'ing file (1) verilog/inc_nonl.v (New) (no-output) VPASSERT'ing file (2) verilog/v_sv_pgm.v (New) (no-output) VPASSERT'ing file (3) verilog/v_sv_mod.v (New) (no-output) VPASSERT'ing file (4) verilog/example.v (New) VPASSERT'ing file (5) verilog/v_hier_top2.v (New) (no-output) VPASSERT'ing file (6) verilog/v_hier_subprim.v (New) (no-output) VPASSERT'ing file (7) verilog/parser_sv09.v (New) (no-output) VPASSERT'ing file (8) verilog/inc_def09.v (New) (no-output) VPASSERT'ing file (9) verilog/t_80_foo.v (New) (no-output) VPASSERT'ing file (10) verilog/parser_bugs.v (New) (no-output) VPASSERT'ing file (11) verilog/v_comments.v (New) (no-output) VPASSERT'ing file (12) verilog/v_sv_pkg.v (New) (no-output) VPASSERT'ing file (13) verilog/inc_ifdef.v (New) (no-output) VPASSERT'ing file (14) verilog/t_86_vhier_tick_sub.v (New) (no-output) VPASSERT'ing file (15) verilog/v_v2k.v (New) (no-output) VPASSERT'ing file (16) verilog/v_hier_sub.v (New) (no-output) VPASSERT'ing file (17) verilog/parser_sv.v (New) (no-output) VPASSERT'ing file (18) verilog/test.v (New) (no-output) VPASSERT'ing file (19) verilog/v_hier_top.v (New) (no-output) VPASSERT'ing file (20) verilog/v_recursive.v (New) (no-output) VPASSERT'ing file (21) verilog/t_86_vhier_tick.v (New) (no-output) VPASSERT'ing file (22) verilog/v_hier_noport.v (New) (no-output) VPASSERT'ing file (23) verilog/v_gate.v (New) (no-output) VPASSERT'ing file (24) verilog/pli.v (New) VPASSERT'ing file (25) verilog/v_hier_subsub.v (New) (no-output) VPASSERT'ing file (26) verilog/pinorder.v (New) (no-output) VPASSERT'ing file (27) verilog/v_sv_intf.v (New) (no-output) VPASSERT'ing file (28) verilog/inc2.v (New) (no-output) VPASSERT'ing file (29) verilog/inc1.v (New) (no-output) VPASSERT generated 29 new file(s) ok 5 - diff ok 6 # skip author only test (harmless) ok t/80_vppreproc.t ..... 1..15 Checking vppreproc... /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vppreproc -y verilog inc2.v > test_dir/vppreproc_none.v ok 1 - run command ok 2 - vppreproc output from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vppreproc -y verilog inc2.v > test_dir/vppreproc_none.v ok 3 - diff /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vppreproc --nocomment --pedantic -y verilog inc2.v > test_dir/vppreproc_cmped.v ok 4 - run command ok 5 - vppreproc output from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vppreproc --nocomment --pedantic -y verilog inc2.v > test_dir/vppreproc_cmped.v ok 6 - diff /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vppreproc --simple -y verilog inc2.v > test_dir/vppreproc_simple.v ok 7 - run command ok 8 - vppreproc output from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vppreproc --simple -y verilog inc2.v > test_dir/vppreproc_simple.v ok 9 - diff /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vppreproc --dump-defines -y verilog inc2.v > test_dir/vppreproc_defines.v ok 10 - run command ok 11 - vppreproc output from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vppreproc --dump-defines -y verilog inc2.v > test_dir/vppreproc_defines.v ok 12 - diff /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vppreproc -f verilog/t_80_foo.f -y verilog inc2.v > test_dir/vppreproc_rel_file.v ok 13 - run command ok 14 - vppreproc output from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vppreproc -f verilog/t_80_foo.f -y verilog inc2.v > test_dir/vppreproc_rel_file.v ok 15 - diff ok t/85_vhier.t ......... 1..15 Checking vhier... /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --cells --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 1 - vhier outputted from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --cells --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 2 - vhier file compare /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --input-files --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 3 - vhier outputted from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --input-files --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 4 - vhier file compare /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --resolve-files --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 5 - vhier outputted from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --resolve-files --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 6 - vhier file compare /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --module-files --language 2001 --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 7 - vhier outputted from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --module-files --language 2001 --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 8 - vhier file compare /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --module-files --top-module v_hier_sub --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 9 - vhier outputted from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --module-files --top-module v_hier_sub --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 10 - vhier file compare /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --forest --instance --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 11 - vhier outputted from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --forest --instance --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 12 - vhier file compare /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --xml --cells --input-files --module-files --missing-modules --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 13 - vhier outputted from: /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --xml --cells --input-files --module-files --missing-modules --nomissing -y verilog v_hier_top.v -o test_dir/vhier.out ok 14 - vhier file compare ok 15 # skip author only XML test (harmless) ok t/86_vhier_tick.t .... 1..2 ok 1 - /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --input-files -y verilog t_86_vhier_tick.v ok 2 - /usr/bin/perl -Iblib/arch -Iblib/lib -IPreproc/blib/arch -IPreproc/blib/lib ./vhier --input-files -y verilog t_86_vhier_tick.v ok All tests successful. Files=32, Tests=452, 9 wallclock secs ( 0.16 usr 0.06 sys + 7.62 cusr 0.64 csys = 8.48 CPU) Result: PASS make[2]: Entering directory '/«PKGBUILDDIR»/Parser' No tests defined for Verilog::Parser extension. make[2]: Leaving directory '/«PKGBUILDDIR»/Parser' make[2]: Entering directory '/«PKGBUILDDIR»/Preproc' No tests defined for Verilog::Preproc extension. make[2]: Leaving directory '/«PKGBUILDDIR»/Preproc' make[1]: Leaving directory '/«PKGBUILDDIR»' fakeroot debian/rules binary-arch dh binary-arch dh_testroot -a dh_prep -a debian/rules override_dh_auto_install make[1]: Entering directory '/«PKGBUILDDIR»' dh_auto_install make -j1 install DESTDIR=/«PKGBUILDDIR»/debian/libverilog-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/«PKGBUILDDIR»' make[3]: Entering directory '/«PKGBUILDDIR»/Parser' Manifying 2 pod documents make[3]: Leaving directory '/«PKGBUILDDIR»/Parser' make[3]: Entering directory '/«PKGBUILDDIR»/Preproc' Manifying 1 pod document make[3]: Leaving directory '/«PKGBUILDDIR»/Preproc' Manifying 4 pod documents Manifying 18 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/auto/Verilog/Preproc/Preproc.so Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/auto/Verilog/Parser/Parser.so Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Std.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Preproc.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Language.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Verilog-Perl.pod Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Getopt.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/SigParser.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Parser.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/EditFiles.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Pin.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Logger.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/File.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Defparam.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Subclass.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/ContAssign.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Net.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Module.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Cell.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Interface.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/ModPort.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Port.pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man1/vhier.1p Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man1/vpassert.1p Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man1/vrename.1p Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man1/vppreproc.1p Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::Pin.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Preproc.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::EditFiles.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::Interface.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::Port.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::Defparam.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::Cell.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::Logger.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::Net.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::Module.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Parser.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::ContAssign.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Language.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::ModPort.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Std.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::SigParser.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::Subclass.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Getopt.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Verilog-Perl.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/share/man/man3/Verilog::Netlist::File.3pm Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/bin/vpassert Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/bin/vrename Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/bin/vhier Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/bin/vppreproc Installing /«PKGBUILDDIR»/debian/libverilog-perl/usr/bin/vsplitmodule make[2]: Leaving directory '/«PKGBUILDDIR»' rm /«PKGBUILDDIR»/debian/libverilog-perl/usr/bin/vsplitmodule make[1]: Leaving directory '/«PKGBUILDDIR»' dh_installdocs -a dh_installchangelogs -a dh_installexamples -a dh_installman -a dh_lintian -a dh_perl -a dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_strip -a dh_strip debug symbol extraction: enabling -a due to Build-Debug-Symbols: yes in /CurrentlyBuilding dh_strip debug symbol extraction: all non-arch-all packages for this build platform powerpc: libverilog-perl dh_strip debug symbol extraction: packages to act on: libverilog-perl dh_strip debug symbol extraction: ignored packages: Using buildid for compat level >= 9 dpkg-gencontrol: warning: -is is deprecated; it is without effect dpkg-gencontrol: warning: -ip is deprecated; it is without effect dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dpkg-gencontrol: warning: package libverilog-perl: unused substitution variable ${perl:Depends} /usr/bin/pkg_create_dbgsym: deferring build of .ddeb to dh_gencontrol dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dh_gencontrol debug symbol wrapper: all non-arch-all packages for this build platform powerpc: libverilog-perl dh_gencontrol debug symbol wrapper: packages to act on: libverilog-perl dh_gencontrol debug symbol wrapper: ignored packages: dh_gencontrol debug symbol wrapper: processing package libverilog-perl (pkgdir debian/libverilog-perl, ddeb package dir debian/libverilog-perl-dbgsym) dh_gencontrol debug symbol wrapper: building libverilog-perl-dbgsym_3.418-1_powerpc.ddeb dpkg-deb: building package 'libverilog-perl-dbgsym' in '../libverilog-perl-dbgsym_3.418-1_powerpc.ddeb'. dh_gencontrol debug symbol wrapper: dpkg-distaddfile libverilog-perl-dbgsym_3.418-1_powerpc.ddeb perl extra dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe dh_md5sums -a dh_builddeb -a INFO: pkgstriptranslations version 129 pkgstriptranslations: processing libverilog-perl (in debian/libverilog-perl); do_strip: , oemstrip: pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libverilog-perl/DEBIAN/control, package libverilog-perl, directory debian/libverilog-perl pkgstripfiles: Truncating usr/share/doc/libverilog-perl/changelog.Debian.gz to topmost ten records pkgstripfiles: Running PNG optimization (using 24 cpus) for package libverilog-perl ... pkgstripfiles: No PNG files. dpkg-deb: building package 'libverilog-perl' in '../libverilog-perl_3.418-1_powerpc.deb'. dpkg-genchanges -B -mLaunchpad Build Daemon >../libverilog-perl_3.418-1_powerpc.changes dpkg-genchanges: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build libverilog-perl-3.418 dpkg-buildpackage: binary-only upload (no source included) ──────────────────────────────────────────────────────────────────────────────── Build finished at 20160207-2332 Finished ──────── I: Built successfully ┌──────────────────────────────────────────────────────────────────────────────┐ │ Post Build Chroot │ └──────────────────────────────────────────────────────────────────────────────┘ ┌──────────────────────────────────────────────────────────────────────────────┐ │ Changes │ └──────────────────────────────────────────────────────────────────────────────┘ libverilog-perl_3.418-1_powerpc.changes: ──────────────────────────────────────── Format: 1.8 Date: Sun, 07 Feb 2016 16:49:29 +0100 Source: libverilog-perl Binary: libverilog-perl Architecture: powerpc Version: 3.418-1 Distribution: xenial-proposed Urgency: medium Maintainer: Launchpad Build Daemon Changed-By: gregor herrmann Description: libverilog-perl - framework providing Verilog support Changes: libverilog-perl (3.418-1) unstable; urgency=medium . [ gregor herrmann ] * Rename autopkgtest configuration file(s) as per new pkg-perl- autopkgtest schema. . [ Salvatore Bonaccorso ] * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * New upstream release. * Update years of upstream and packaging copyright. * Declare compliance with Debian Policy 3.9.7. * Add lintian override for a false positive spelling-error-in-manpage tag. Checksums-Sha1: 5f9f436d6229df8df3e85a6f853e3f47b9e8e791 866328 libverilog-perl-dbgsym_3.418-1_powerpc.ddeb 3f0c50f87673ed1b8ee03c92527eb4e6179c377a 384072 libverilog-perl_3.418-1_powerpc.deb Checksums-Sha256: 3c876d6ec0213d6885e55b6e5e8dd19b23573ae4249815ad63ae57f613f0768c 866328 libverilog-perl-dbgsym_3.418-1_powerpc.ddeb 1285282b56773153a0ceb45dfdd0341647f21d053ac3414962c6c21d6b874c9d 384072 libverilog-perl_3.418-1_powerpc.deb Files: 205d368b16affbf9eedd953fff925886 866328 perl extra libverilog-perl-dbgsym_3.418-1_powerpc.ddeb cc3df942ed23134d3168adcf7e9ceb6d 384072 perl optional libverilog-perl_3.418-1_powerpc.deb ┌──────────────────────────────────────────────────────────────────────────────┐ │ Package contents │ └──────────────────────────────────────────────────────────────────────────────┘ libverilog-perl_3.418-1_powerpc.deb ─────────────────────────────────── new debian package, version 2.0. size 384072 bytes: control archive= 2571 bytes. 1457 bytes, 30 lines control 4692 bytes, 56 lines md5sums Package: libverilog-perl Version: 3.418-1 Architecture: powerpc Maintainer: Ubuntu Developers Original-Maintainer: Debian Perl Group Installed-Size: 1618 Depends: perl (>= 5.22.1-5), perlapi-5.22.1, libc6 (>= 2.4), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Section: perl Priority: optional Homepage: https://metacpan.org/release/Verilog-Perl Description: framework providing Verilog support Verilog is a Perl framework providing Verilog support in the Perl language. It includes: . * Verilog::Getopt, which parses command line options similar to C++ and VCS * Verilog::Language, which knows the language keywords and parses numbers. * Verilog::Netlist, which builds netlists out of Verilog files. This allows easy scripts to determine things such as the hierarchy of modules. * Verilog::Parser, which invokes callbacks for language tokens * Verilog::Preproc, preprocesses the language, and allows reading post-processed files right from Perl without temporary files. . It also includes a variety of useful utilities: . * vpassert inserts PLIish warnings and assertions for any simulator * vppreproc preprocesses the complete Verilog 2001 and SystemVerilog language * vrename renames and cross-references Verilog symbols. It creates Verilog cross references and makes it easy to rename signal and module names over multiple files. drwxr-xr-x root/root 0 2016-02-07 23:32 ./ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/bin/ -rwxr-xr-x root/root 15150 2016-02-07 23:31 ./usr/bin/vhier -rwxr-xr-x root/root 51317 2016-02-07 23:31 ./usr/bin/vpassert -rwxr-xr-x root/root 7543 2016-02-07 23:31 ./usr/bin/vppreproc -rwxr-xr-x root/root 18863 2016-02-07 23:31 ./usr/bin/vrename drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/lib/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/perl5/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/perl5/5.22/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/ -rw-r--r-- root/root 11103 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/EditFiles.pm -rw-r--r-- root/root 21967 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Getopt.pm -rw-r--r-- root/root 21146 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Language.pm -rw-r--r-- root/root 19544 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist.pm drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/ -rw-r--r-- root/root 7573 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Cell.pm -rw-r--r-- root/root 3275 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/ContAssign.pm -rw-r--r-- root/root 3240 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Defparam.pm -rw-r--r-- root/root 16126 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/File.pm -rw-r--r-- root/root 10098 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Interface.pm -rw-r--r-- root/root 4264 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Logger.pm -rw-r--r-- root/root 7077 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/ModPort.pm -rw-r--r-- root/root 14826 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Module.pm -rw-r--r-- root/root 11895 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Net.pm -rw-r--r-- root/root 7437 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Pin.pm -rw-r--r-- root/root 5443 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Port.pm -rw-r--r-- root/root 8832 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Netlist/Subclass.pm -rw-r--r-- root/root 15607 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Parser.pm -rw-r--r-- root/root 13268 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Preproc.pm -rw-r--r-- root/root 13709 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/SigParser.pm -rw-r--r-- root/root 3429 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Std.pm -rw-r--r-- root/root 11061 2016-02-02 23:36 ./usr/lib/powerpc-linux-gnu/perl5/5.22/Verilog/Verilog-Perl.pod drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/perl5/5.22/auto/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/perl5/5.22/auto/Verilog/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/perl5/5.22/auto/Verilog/Parser/ -rw-r--r-- root/root 986200 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/perl5/5.22/auto/Verilog/Parser/Parser.so drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/perl5/5.22/auto/Verilog/Preproc/ -rw-r--r-- root/root 198688 2016-02-07 23:32 ./usr/lib/powerpc-linux-gnu/perl5/5.22/auto/Verilog/Preproc/Preproc.so drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/share/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/share/doc/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/share/doc/libverilog-perl/ -rw-r--r-- root/root 1118 2016-02-07 23:32 ./usr/share/doc/libverilog-perl/changelog.Debian.gz -rw-r--r-- root/root 11457 2016-02-07 15:49 ./usr/share/doc/libverilog-perl/copyright drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/share/doc/libverilog-perl/examples/ -rwxr-xr-x root/root 3338 2013-01-12 13:29 ./usr/share/doc/libverilog-perl/examples/vsplitmodule drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/share/lintian/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/share/lintian/overrides/ -rw-r--r-- root/root 344 2016-02-07 15:49 ./usr/share/lintian/overrides/libverilog-perl drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/share/man/ drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/share/man/man1/ -rw-r--r-- root/root 3207 2016-02-07 23:32 ./usr/share/man/man1/vhier.1p.gz -rw-r--r-- root/root 4838 2016-02-07 23:32 ./usr/share/man/man1/vpassert.1p.gz -rw-r--r-- root/root 2980 2016-02-07 23:32 ./usr/share/man/man1/vppreproc.1p.gz -rw-r--r-- root/root 2953 2016-02-07 23:32 ./usr/share/man/man1/vrename.1p.gz drwxr-xr-x root/root 0 2016-02-07 23:32 ./usr/share/man/man3/ -rw-r--r-- root/root 2712 2016-02-07 23:32 ./usr/share/man/man3/Verilog::EditFiles.3pm.gz -rw-r--r-- root/root 3625 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Getopt.3pm.gz -rw-r--r-- root/root 2868 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Language.3pm.gz -rw-r--r-- root/root 5239 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist.3pm.gz -rw-r--r-- root/root 2163 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::Cell.3pm.gz -rw-r--r-- root/root 1855 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::ContAssign.3pm.gz -rw-r--r-- root/root 1850 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::Defparam.3pm.gz -rw-r--r-- root/root 1884 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::File.3pm.gz -rw-r--r-- root/root 2362 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::Interface.3pm.gz -rw-r--r-- root/root 2083 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::Logger.3pm.gz -rw-r--r-- root/root 2207 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::ModPort.3pm.gz -rw-r--r-- root/root 3020 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::Module.3pm.gz -rw-r--r-- root/root 2645 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::Net.3pm.gz -rw-r--r-- root/root 2165 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::Pin.3pm.gz -rw-r--r-- root/root 2166 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::Port.3pm.gz -rw-r--r-- root/root 2122 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Netlist::Subclass.3pm.gz -rw-r--r-- root/root 4615 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Parser.3pm.gz -rw-r--r-- root/root 4534 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Preproc.3pm.gz -rw-r--r-- root/root 4752 2016-02-07 23:32 ./usr/share/man/man3/Verilog::SigParser.3pm.gz -rw-r--r-- root/root 1654 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Std.3pm.gz -rw-r--r-- root/root 5290 2016-02-07 23:32 ./usr/share/man/man3/Verilog::Verilog-Perl.3pm.gz ┌──────────────────────────────────────────────────────────────────────────────┐ │ Post Build │ └──────────────────────────────────────────────────────────────────────────────┘ ┌──────────────────────────────────────────────────────────────────────────────┐ │ Cleanup │ └──────────────────────────────────────────────────────────────────────────────┘ Not removing build depends: as requested Keeping session: ┌──────────────────────────────────────────────────────────────────────────────┐ │ Summary │ └──────────────────────────────────────────────────────────────────────────────┘ Build Architecture: powerpc Build-Space: 27608 Build-Time: 117 Distribution: xenial-proposed Host Architecture: powerpc Install-Time: 36 Job: libverilog-perl_3.418-1.dsc Machine Architecture: powerpc Package: libverilog-perl Package-Time: 153 Source-Version: 3.418-1 Space: 27608 Status: successful Version: 3.418-1 ──────────────────────────────────────────────────────────────────────────────── Finished at 20160207-2332 Build needed 00:02:33, 27608k disc space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['scan-for-processes', 'PACKAGEBUILD-8981103'] Scanning for processes to kill in build /home/buildd/build-PACKAGEBUILD-8981103/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', 'PACKAGEBUILD-8981103'] Unmounting chroot for build PACKAGEBUILD-8981103... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', 'PACKAGEBUILD-8981103'] Removing build PACKAGEBUILD-8981103