linux-armadaxp 3.2.0-1602.5 source package in Ubuntu


linux-armadaxp (3.2.0-1602.5) precise; urgency=low

  [ Ike Panhc ]

  * Remove unnecessary debug message
    - LP: #960340
  * Rebase onto Ubuntu-3.2.0-22.35

  [ Stefan Bader ]

  * d-i: Fix module name for dm-raid45
    - LP: #969248

  [ Upstream Kernel Changes ]

  * ARM: 7178/1: fault.c: Port OOM changes into do_page_fault
    - LP: #951043

  [ Ubuntu: 3.2.0-22.35 ]

  * Revert "SAUCE: hotkey quirks for various Zeptro Znote and Fujitsu Amilo
  * SAUCE: (no-up) elide some ioctl warnings which are known benign
    - LP: #972355
  * SAUCE (no-up) Provide a param for allowing the BIOS to handle changing
    the brightness on AC/battery status changes.
    - LP: #949311
  * SAUCE (drop after 3.4) Quirk for enabling backlight hotkeys on Samsung
    - LP: #875893
  * SAUCE: PCI: Allow pcie_aspm=force to work even when FADT indicates it
    is unsupported
    - LP: #962038
  * SAUCE: (drop after 3.5) drm/i915: reinstate GM45 TV detection fix
    - LP: #638939
  * SAUCE: SECCOMP: audit: always report seccomp violations
  * SAUCE: SECCOMP: adjust prctl constant
  * [Config] Enable CONFIG_USBIP_CORE=m
    - LP: #900384
  * Rebase to v3.2.14
  * [Config] Updateconfigs after rebase to v3.2.14
  * d-i: Fix module name for dm-raid45
    - LP: #969248
  * SAUCE: remove __initdata from vesafb_fix
    - LP: #969309
  * Revert "sched: tg->se->load should be initialised to tg->shares"
  * toshiba_acpi: make one-bit bitfields unsigned
    - LP: #810015
  * ACPI: EC: Add ec_get_handle()
    - LP: #810015
  * toshiba_acpi: Support alternate hotkey interfaces
    - LP: #810015
  * toshiba_acpi: Support additional hotkey scancodes
    - LP: #810015
  * toshiba_acpi: Refuse to load on machines with buggy INFO
    - LP: #810015
  * ata_piix: Add Toshiba Satellite Pro A120 to the quirks list due to
    broken suspend functionality.
    - LP: #886850
  * sweep the floors and convert some .get_drvinfo routines to strlcpy
    - LP: #921793
  * be2net: init (vf)_if_handle/vf_pmac_id to handle failure scenarios
    - LP: #921793
  * be2net: stop checking the UE registers after an EEH error
    - LP: #921793
  * be2net: don't log more than one error on detecting EEH/UE errors
    - LP: #921793
  * be2net: stop issuing FW cmds if any cmd times out
    - LP: #921793
  * be2net: Fix TX queue create for Lancer
    - LP: #921793
  * be2net: add register dump feature for Lancer
    - LP: #921793
  * be2net: Add EEPROM dump feature for Lancer
    - LP: #921793
  * be2net: Fix VLAN promiscous mode for Lancer
    - LP: #921793
  * be2net: Use V1 query link status command for lancer
    - LP: #921793
  * be2net: Move to new SR-IOV implementation in Lancer
    - LP: #921793
  * be2net: Fix error recovery paths
    - LP: #921793
  * be2net: Add error handling for Lancer
    - LP: #921793
  * be2net: Use new hash key
    - LP: #921793
  * be2net: Fix non utilization of RX queues
    - LP: #921793
  * be2net: netpoll support
    - LP: #921793
  * be2net: update some counters to display via ethtool
    - LP: #921793
  * be2net: workaround to fix a bug in BE
    - LP: #921793
  * be2net: fix ethtool ringparam reporting
    - LP: #921793
  * be2net: refactor/cleanup vf configuration code
    - LP: #921793
  * be2net: Add support for Skyhawk cards
    - LP: #921793
  * be2net: Fix INTx processing for Lancer
    - LP: #921793
  * be2net: fix range check for set_qos for a VF
    - LP: #921793
  * be2net: query link status in be_open()
    - LP: #921793
  * netdev: make net_device_ops const
    - LP: #921793
  * be2net: create RSS rings even in multi-channel configs
    - LP: #921793
  * ethtool: Null-terminate filename passed to ethtool_ops::flash_device
    - LP: #921793
  * sched: Fix nohz load accounting
    - LP: #838811
  * ACPICA: Fix regression in FADT revision checks
    - LP: #883441
  * asus-wmi: move WAPF variable into quirks_entry
    - LP: #969576
  * eeepc-wmi: refine quirks handling
    - LP: #969576
  * drm/i915: Sanitize BIOS debugging bits from PIPECONF
    - LP: #968307
  * drivers: hv: Get rid of some unnecessary code
  * drivers: hv: kvp: Add/cleanup connector defines
  * drivers: hv: kvp: Move the contents of hv_kvp.h to hyperv.h
  * net/hyperv: Convert camel cased variables in rndis_filter.c to lower
  * net/hyperv: Correct the assignment in netvsc_recv_callback()
  * net/hyperv: Remove the unnecessary memset in rndis_filter_send()
  * tools: hv: Use hyperv.h to get the KVP definitions
  * drivers: hv: Cleanup the kvp related state in hyperv.h
  * drivers: hv: kvp: Cleanup the kernel/user protocol
  * drivers: hv: Increase the number of VCPUs supported in the guest
  * net/hyperv: Fix data corruption in rndis_filter_receive()
  * net/hyperv: Add support for vlan trunking from guests
  * Drivers: hv: Add new message types to enhance KVP
  * net/hyperv: fix erroneous NETDEV_TX_BUSY use
  * NLS: improve UTF8 -> UTF16 string conversion routine
  * Drivers: hv: Support the newly introduced KVP messages in the driver
  * Tools: hv: Fully support the new KVP verbs in the user level daemon
  * Tools: hv: Support enumeration from all the pools
  * Drivers: scsi: storvsc: Properly handle errors from the host
  * net: mv643xx_eth: fix build error
    - LP: #921793
  * rebase to v3.2.14
 -- Ike Panhc <email address hidden>   Tue, 03 Apr 2012 14:42:15 +0800

Upload details

Uploaded by:
Ike Panhc on 2012-04-05
Sponsored by:
Jani Monoses
Uploaded to:
Original maintainer:
Ubuntu Kernel Team
Low Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Precise release on 2012-04-05 main devel


Precise: [FULLYBUILT] armhf


File Size SHA-256 Checksum
linux-armadaxp_3.2.0-1602.5.tar.gz 102.0 MiB 9ef1bb773a0a757601e95fc5384fe3d22243c50628a56c3f244b8060dac7239d
linux-armadaxp_3.2.0-1602.5.dsc 3.7 KiB 1370b5f6adf8b9e09c9d6b4b0a6ff6bc9844c3bbbeb38028d715db5b091d4cbe

Available diffs

View changes file

Binary packages built by this source

block-modules-3.2.0-1602-armadaxp-di: Block storage devices

 This package contains the block storage devices, including DAC960 and

crypto-modules-3.2.0-1602-armadaxp-di: crypto modules

 This package contains crypto modules.

fs-core-modules-3.2.0-1602-armadaxp-di: Base filesystem modules

 This includes jfs, reiserfs and xfs.

fs-secondary-modules-3.2.0-1602-armadaxp-di: Extra filesystem modules

 This includes support for Windows NTFS and MacOS HFS/HFSPlus

input-modules-3.2.0-1602-armadaxp-di: Support for various input methods
irda-modules-3.2.0-1602-armadaxp-di: Support for Infrared protocols
kernel-image-3.2.0-1602-armadaxp-di: Linux kernel binary image for the Debian installer

 This package contains the kernel image for the Debian installer
 boot images. It does _not_ provide a usable kernel for your full
 Debian system.

linux-headers-3.2.0-1602: Header files related to Linux kernel version 3.2.0

 This package provides kernel header files for version 3.2.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-armadaxp-headers-3.2.0-1602/debian.README.gz for details

linux-headers-3.2.0-1602-armadaxp: Linux kernel headers for version 3.2.0 on Marvell Armada XP based systems

 This package provides kernel header files for version 3.2.0 on
 Marvell Armada XP based systems.
 This is for sites that want the latest kernel headers. Please read
 /usr/share/doc/linux-armadaxp-headers-3.2.0-1602/debian.README.gz for details.

linux-image-3.2.0-1602-armadaxp: Linux kernel image for version 3.2.0 on Marvell Armada XP based systems

 This package contains the Linux kernel image for version 3.2.0 on
 Marvell Armada XP based systems.
 Also includes the corresponding file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 Supports Marvell Armada XP processors.
 Targeted towards boards
 You likely do not want to install this package directly. Instead, install
 the linux-armadaxp meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

md-modules-3.2.0-1602-armadaxp-di: Multi-device support (raid, device-mapper, lvm)
mouse-modules-3.2.0-1602-armadaxp-di: Mouse support

 This package contains mouse drivers for the Linux kernel.

nic-modules-3.2.0-1602-armadaxp-di: Network interface support
nic-shared-modules-3.2.0-1602-armadaxp-di: nic shared modules

  This package contains modules which support nic modules

nic-usb-modules-3.2.0-1602-armadaxp-di: USB network interface support
parport-modules-3.2.0-1602-armadaxp-di: Parallel port support
plip-modules-3.2.0-1602-armadaxp-di: PLIP (parallel port) networking support
ppp-modules-3.2.0-1602-armadaxp-di: PPP (serial port) networking support
scsi-modules-3.2.0-1602-armadaxp-di: SCSI storage support
squashfs-modules-3.2.0-1602-armadaxp-di: squashfs modules

 This package contains squashfs modules.

storage-core-modules-3.2.0-1602-armadaxp-di: Core storage support

 Includes core SCSI, LibATA, USB-Storage. Also includes related block
 devices for CD, Disk and Tape medium (and IDE Floppy).

usb-modules-3.2.0-1602-armadaxp-di: Core USB support