Ubuntu

“linux-armadaxp” 3.2.0-1612.17 source package in Ubuntu

Changelog

linux-armadaxp (3.2.0-1612.17) precise-proposed; urgency=low

  [ Jani Monoses ]

  * Release Tracking Bug
    -LP: #1087212
  * Rebase on Ubuntu-3.2.0-35.55 and add B0 support.

  * [Config] Config updates for ArmadaXP B0.
  * Uncomment MACHINE_START entry for ARMADA_XP_RDSRV

  [ Upstream Kernel Changes ]

  * DSMP cleanup to be able to compile without IO coherancy, compile time
    errors found, and needed to get fixed
  * OSS: Multi-line cache operations update
  * OSS: fix multi-line operations align address and size from KW2
  * Add macros for NFP rate limiting support
  * DSMP fixing the nameing in arch/arm/mm/proc-sheeva_pj4bv7.S
  * Clear ldstm workarounf in case No errata
  * This patch adds the MMU initialisation for the LPAE page table format.
    The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new
    proc-v7lpae.S file contains the initialisation, context switch and
    save/restore code for ARMv7 with the LPAE. The TTBRx split is based on
    the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit
    mappings (supersections) and a few other memory types in mmu.c are
    conditionally compiled. by Catalin Marinas <email address hidden>
  * DSMP 64K support
  * AXP: fixing ERRATA implmention typo
  * ArmadaXP B0 support patch
  * DSMP B0 support - Added support for errata 6124
  * Fix the Makefile for LPAE
  * LPAE: add proc-sheeva_pj4bv7lpae.S

  [ Ubuntu: 3.2.0-35.55 ]

  * Release Tracking Bug
    - LP: #1086856
  * Revert "SAUCE: ata_piix: add a disable_driver option"
    - LP: #1079084
  * Revert "SAUCE: ata_piix: defer disks to the Hyper-V drivers by default"
    - LP: #1079084
  * SAUCE: ata_piix: add a disable_driver option
    - LP: #1079084, #994870
  * libata: add a host flag to ignore detected ATA devices
    - LP: #1079084
  * ata_piix: defer disks to the Hyper-V drivers by default
    - LP: #1079084, #929545, #942316

  [ Ubuntu: 3.2.0-35.54 ]

  * Release Tracking Bug
    - LP: #1086349
  * Revert "SAUCE: SECCOMP: audit: always report seccomp violations"
    - LP: #1079469
  * SAUCE: SECCOMP: audit: fix build on archs without CONFIG_AUDITSYSCALL
    - LP: #1079469
  * seccomp: forcing auditing of kill condition
    - LP: #1079469
  * Bluetooth: Avoid calling undefined smp_conn_security()
    - LP: #1081676
  * x86: Remove the ancient and deprecated disable_hlt() and enable_hlt()
    facility
    - LP: #1081676
  * drm/nouveau: silence modesetting spam on pre-gf8 chipsets
    - LP: #1081676
  * drm/nouveau: fix suspend/resume when in headless mode
    - LP: #1081676
  * drm/nouveau: headless mode by default if pci class != vga display
    - LP: #1081676
  * nfsd: add get_uint for u32's
    - LP: #1081676
  * ALSA: PCM: Fix some races at disconnection
    - LP: #1081676
  * ALSA: usb-audio: Fix races at disconnection
    - LP: #1081676
  * ALSA: usb-audio: Use rwsem for disconnect protection
    - LP: #1081676
  * ALSA: usb-audio: Fix races at disconnection in mixer_quirks.c
    - LP: #1081676
  * ALSA: Add a reference counter to card instance
    - LP: #1081676
  * ALSA: Avoid endless sleep after disconnect
    - LP: #1081676
  * drm/radeon: fix typo in evergreen_mc_resume()
    - LP: #1081676
  * USB: mos7840: remove unused variable
    - LP: #1081676
  * rtnetlink: Fix problem with buffer allocation
    - LP: #1081676
  * rtnetlink: fix rtnl_calcit() and rtnl_dump_ifinfo()
    - LP: #1081676
  * gpio-timberdale: fix a potential wrapping issue
    - LP: #1081676
  * cfg80211: fix antenna gain handling
    - LP: #1081676
  * drm/i915: fix overlay on i830M
    - LP: #1081676
  * drm/i915: fixup infoframe support for sdvo
    - LP: #1081676
  * drm/i915: clear the entire sdvo infoframe buffer
    - LP: #1081676
  * crypto: cryptd - disable softirqs in cryptd_queue_worker to prevent
    data corruption
    - LP: #1081676
  * ARM: at91: at91sam9g10: fix SOC type detection
    - LP: #1081676
  * ARM: at91/i2c: change id to let i2c-gpio work
    - LP: #1081676
  * mac80211: Only process mesh config header on frames that RA_MATCH
    - LP: #1081676
  * mac80211: don't inspect Sequence Control field on control frames
    - LP: #1081676
  * mac80211: fix SSID copy on IBSS JOIN
    - LP: #1081676
  * wireless: drop invalid mesh address extension frames
    - LP: #1081676
  * mac80211: check management frame header length
    - LP: #1081676
  * mac80211: verify that skb data is present
    - LP: #1081676
  * mac80211: make sure data is accessible in EAPOL check
    - LP: #1081676
  * ath9k: fix stale pointers potentially causing access to free'd skbs
    - LP: #1081676
  * floppy: do put_disk on current dr if blk_init_queue fails
    - LP: #1081676
  * floppy: properly handle failure on add_disk loop
    - LP: #1081676
  * xen/gntdev: don't leak memory from IOCTL_GNTDEV_MAP_GRANT_REF
    - LP: #1081676
  * rt2800: validate step value for temperature compensation
    - LP: #1081676
  * ath9k: Test for TID only in BlockAcks while checking tx status
    - LP: #1081676
  * module: fix out-by-one error in kallsyms
    - LP: #1081676
  * Input: tsc40 - remove wrong announcement of pressure support
    - LP: #1081676
  * HID: microsoft: fix invalid rdesc for 3k kbd
    - LP: #1081676
  * xen/mmu: Use Xen specific TLB flush instead of the generic one.
    - LP: #1081676
  * NFS: Wait for session recovery to finish before returning
    - LP: #1081676
  * NFSv4.1: We must release the sequence id when we fail to get a session
    slot
    - LP: #1081676
  * NFSv4: nfs4_locku_done must release the sequence id
    - LP: #1081676
  * NFS: fix bug in legacy DNS resolver.
    - LP: #1081676
  * nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd
    timeouts
    - LP: #1081676
  * nfs: Show original device name verbatim in /proc/*/mount{s,info}
    - LP: #1081676
  * target: Don't return success from module_init() if setup fails
    - LP: #1081676
  * target: Avoid integer overflow in se_dev_align_max_sectors()
    - LP: #1081676
  * iscsi-target: Fix missed wakeup race in TX thread
    - LP: #1081676
  * DRM/Radeon: Fix Load Detection on legacy primary DAC.
    - LP: #1081676
  * cifs: fix potential buffer overrun in cifs.idmap handling code
    - LP: #1081676
  * ALSA: hda: Cirrus: Fix coefficient index for beep configuration
    - LP: #1081676
  * ALSA: HDA: Fix digital microphone on CS420x
    - LP: #1081676
  * ALSA: hda - Force to reset IEC958 status bits for AD codecs
    - LP: #1081676, #359361
  * hwmon: (w83627ehf) Force initial bank selection
    - LP: #1081676
  * drm: restore open_count if drm_setup fails
    - LP: #1081676
  * ALSA: hda - Fix empty DAC filling in patch_via.c
    - LP: #1081676
  * ALSA: hda - Fix invalid connections in VT1802 codec
    - LP: #1081676
  * ALSA: hda - Add new codec ALC668 and ALC900 (default name ALC1150)
    - LP: #1081676
  * ALSA: Fix card refcount unbalance
    - LP: #1081676
  * xfs: fix reading of wrapped log data
    - LP: #1081676
  * fanotify: fix missing break
    - LP: #1081676
  * mm: bugfix: set current->reclaim_state to NULL while returning from
    kswapd()
    - LP: #1081676
  * drm/vmwgfx: Fix hibernation device reset
    - LP: #1081676
  * drm/vmwgfx: Fix a case where the code would BUG when trying to pin GMR
    memory
    - LP: #1081676
  * sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter()
    - LP: #1081676
  * netlink: use kfree_rcu() in netlink_release()
    - LP: #1081676
  * tcp: fix FIONREAD/SIOCINQ
    - LP: #1081676
  * ipv6: Set default hoplimit as zero.
    - LP: #1081676
  * net: usb: Fix memory leak on Tx data path
    - LP: #1081676
  * l2tp: fix oops in l2tp_eth_create() error path
    - LP: #1081676
  * af-packet: fix oops when socket is not present
    - LP: #1081676
  * ipv6: send unsolicited neighbour advertisements to all-nodes
    - LP: #1081676
  * r8169: allow multicast packets on sub-8168f chipset.
    - LP: #1081676
  * r8169: Fix WoL on RTL8168d/8111d.
    - LP: #1081676
  * r8169: use unlimited DMA burst for TX
    - LP: #1081676
  * sky2: Fix for interrupt handler
    - LP: #1081676
  * ALSA: usb-audio: Fix mutex deadlock at disconnection
    - LP: #1081676
  * Linux 3.2.34
    - LP: #1081676
  * bonding: Bonding driver does not consider the gso_max_size/gso_max_segs
    setting of slave devices.
    - LP: #1078184
  * mm/hotplug: correctly add new zone to all other nodes' zone lists
    - LP: #1079860
    - CVE-2012-5517
  * thinkpad-acpi: fix issuing duplicated key events for brightness up/down
    - LP: #841315
  * Bluetooth: ath3k: Add support for VAIO VPCEH [0489:e027]
    - LP: #898826
 -- Jani Monoses <email address hidden>   Mon, 19 Nov 2012 15:44:02 +0200

Upload details

Uploaded by:
Jani Monoses on 2012-12-06
Uploaded to:
Precise
Original maintainer:
Ubuntu Kernel Team
Component:
main
Architectures:
armhf
Section:
devel
Urgency:
Low Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Builds

Precise: [FULLYBUILT] armhf

Downloads

File Size MD5 Checksum
linux-armadaxp_3.2.0-1612.17.tar.gz 101.6 MiB a17f626f9d319cce38924f30d072d269
linux-armadaxp_3.2.0-1612.17.dsc 1.7 KiB 5d0b6416dc15664a0200d333a4464ce1

Available diffs

Binary packages built by this source

block-modules-3.2.0-1612-armadaxp-di: Block storage devices

 This package contains the block storage devices, including DAC960 and
 paraide.

crypto-modules-3.2.0-1612-armadaxp-di: crypto modules

 This package contains crypto modules.

fs-core-modules-3.2.0-1612-armadaxp-di: Base filesystem modules

 This includes jfs, reiserfs and xfs.

fs-secondary-modules-3.2.0-1612-armadaxp-di: Extra filesystem modules

 This includes support for Windows NTFS and MacOS HFS/HFSPlus

input-modules-3.2.0-1612-armadaxp-di: Support for various input methods
irda-modules-3.2.0-1612-armadaxp-di: Support for Infrared protocols
kernel-image-3.2.0-1612-armadaxp-di: Linux kernel binary image for the Debian installer

 This package contains the kernel image for the Debian installer
 boot images. It does _not_ provide a usable kernel for your full
 Debian system.

linux-headers-3.2.0-1612: Header files related to Linux kernel version 3.2.0

 This package provides kernel header files for version 3.2.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-armadaxp-headers-3.2.0-1612/debian.README.gz for details

linux-headers-3.2.0-1612-armadaxp: Linux kernel headers for version 3.2.0 on Marvell Armada XP based systems

 This package provides kernel header files for version 3.2.0 on
 Marvell Armada XP based systems.
 .
 This is for sites that want the latest kernel headers. Please read
 /usr/share/doc/linux-armadaxp-headers-3.2.0-1612/debian.README.gz for details.

linux-image-3.2.0-1612-armadaxp: Linux kernel image for version 3.2.0 on Marvell Armada XP based systems

 This package contains the Linux kernel image for version 3.2.0 on
 Marvell Armada XP based systems.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Marvell Armada XP processors.
 .
 Targeted towards boards
 .
 You likely do not want to install this package directly. Instead, install
 the linux-armadaxp meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

md-modules-3.2.0-1612-armadaxp-di: Multi-device support (raid, device-mapper, lvm)
mouse-modules-3.2.0-1612-armadaxp-di: Mouse support

 This package contains mouse drivers for the Linux kernel.

nic-modules-3.2.0-1612-armadaxp-di: Network interface support
nic-shared-modules-3.2.0-1612-armadaxp-di: nic shared modules

  This package contains modules which support nic modules

nic-usb-modules-3.2.0-1612-armadaxp-di: USB network interface support
parport-modules-3.2.0-1612-armadaxp-di: Parallel port support
plip-modules-3.2.0-1612-armadaxp-di: PLIP (parallel port) networking support
ppp-modules-3.2.0-1612-armadaxp-di: PPP (serial port) networking support
scsi-modules-3.2.0-1612-armadaxp-di: SCSI storage support
squashfs-modules-3.2.0-1612-armadaxp-di: squashfs modules

 This package contains squashfs modules.

storage-core-modules-3.2.0-1612-armadaxp-di: Core storage support

 Includes core SCSI, LibATA, USB-Storage. Also includes related block
 devices for CD, Disk and Tape medium (and IDE Floppy).

usb-modules-3.2.0-1612-armadaxp-di: Core USB support