linux-raspi 5.4.0-1008.8 source package in Ubuntu

Changelog

linux-raspi (5.4.0-1008.8) focal; urgency=medium

  * focal/linux-raspi: 5.4.0-1008.8 -proposed tracker (LP: #1870495)

  *  focal/linux-raspi: Upstream raspberrypi patchset 2020-04-07 (LP: #1871361)
    - drm/v3d: Replace wait_for macros to remove use of msleep (#3510)
    - Reduce noise from rpi poe hat fan
    - add Sensirion SPS30 to i2c-sensor overlay
    - media: add V4L2_CTRL_TYPE_AREA control type
    - media: add V4L2_CID_UNIT_CELL_SIZE control
    - media: v4l2-common: add pixel encoding support
    - media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info
    - media: vb2: add V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF
    - media: v4l2-mem2mem: support held capture buffers
    - media: videodev2.h: add V4L2_DEC_CMD_FLUSH
    - media: v4l2-mem2mem: add stateless_(try_)decoder_cmd ioctl helpers
    - media: v4l2-mem2mem: add new_frame detection
    - media: Documentation: media: Document V4L2_CTRL_TYPE_AREA
    - media: v4l: Add definitions for HEVC stateless decoding
    - media: v4l2-mem2mem: Fix hold buf flag checks
    - media: pixfmt: Document the HEVC slice pixel format
    - media: uapi: hevc: Add scaling matrix control
    - media: uapi: hevc: Add segment address field
    - media: hevc_ctrls: Add slice param dependent slice segment
    - media: uapi: Add hevc ctrls for WPP decoding
    - media: videodev2.h: Add a format for column YUV4:2:0 modes
    - media: v4l2-mem2mem: allow request job buffer processing after job finish
    - media: dt-bindings: media: Add binding for the Raspberry PI HEVC decoder
    - staging: media: Add Raspberry Pi V4L2 H265 decoder
    - dtoverlays: Add overlay to enable the HEVC V4L2 driver
    - defconfig: Add V4L2 HEVC driver to bcm2711_defconfig
    - mmc: sdhci: Silence MMC warnings
    - Revert "v3d_drv: Allow clock retrieval by name"
    - Revert "clk-raspberrypi: Also support v3d clock"
    - Revert "clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks"
    - dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema
    - dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding
    - i2c: brcmstb: Support BCM2711 HDMI BSC controllers
    - i2c: brcmstb: Allow to compile it on BCM2835
    - [Config] raspi: Set I2C_BRCMSTB=m
    - dt-bindings: clock: Add a binding for the RPi Firmware clocks
    - clk: bcm: rpi: Allow the driver to be probed by DT
    - clk: bcm: rpi: Statically init clk_init_data
    - clk: bcm: rpi: Use clk_hw_register for pllb_arm
    - clk: bcm: rpi: Remove global pllb_arm clock pointer
    - clk: bcm: rpi: Make sure pllb_arm is removed
    - clk: bcm: rpi: Remove pllb_arm_lookup global pointer
    - clk: bcm: rpi: Switch to clk_hw_register_clkdev
    - clk: bcm: rpi: Make sure the clkdev lookup is removed
    - clk: bcm: rpi: Create a data structure for the clocks
    - clk: bcm: rpi: Add clock id to data
    - clk: bcm: rpi: Pass the clocks data to the firmware function
    - clk: bcm: rpi: Rename is_prepared function
    - clk: bcm: rpi: Split pllb clock hooks
    - clk: bcm: rpi: Make the PLLB registration function return a clk_hw
    - clk: bcm: rpi: Add DT provider for the clocks
    - clk: bcm: rpi: Discover the firmware clocks
    - ARM: dts: bcm2711: Add firmware clocks node
    - reset: Move reset-simple header out of drivers/reset
    - reset: simple: Add reset callback
    - dt-bindings: clock: Add BCM2711 DVP binding
    - clk: bcm: Add BCM2711 DVP driver
    - [Config] raspi: Set RESET_SIMPLE=y
    - ARM: dts: bcm2711: Add HDMI DVP
    - dt-bindings: display: Convert VC4 bindings to schemas
    - dt-bindings: display: vc4: dpi: Add missing clock-names property
    - dt-bindings: display: vc4: dsi: Add missing clock properties
    - dt-bindings: display: vc4: hdmi: Add missing clock-names property
    - dt-bindings: display: vc4: Document BCM2711 VC5
    - drm/vc4: drv: Add include guards
    - drm/vc4: drv: Support BCM2711
    - drm/vc4: drv: Add support for the BCM2711 HVS5
    - drm/vc4: plane: Improve LBM usage
    - drm/vc4: plane: Move planes creation to its own function
    - drm/vc4: plane: Move additional planes creation to driver
    - drm/vc4: plane: Register all the planes at once
    - drm/vc4: plane: Create overlays for any CRTC
    - drm/vc4: plane: Create more planes
    - drm/vc4: crtc: Rename SoC data structures
    - drm/vc4: crtc: Move crtc state to common header
    - drm/vc4: crtc: Deal with different number of pixel per clock
    - drm/vc4: crtc: Use a shared interrupt
    - drm/vc4: crtc: Turn static const variable into a define
    - drm/vc4: crtc: Move the cob allocation outside of bind
    - drm/vc4: crtc: Rename HVS channel to output
    - drm/vc4: crtc: Use local chan variable
    - drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable
    - drm/vc4: crtc: Assign output to channel automatically
    - drm/vc4: crtc: Add FIFO depth to vc4_crtc_data
    - drm/vc4: crtc: Add function to compute FIFO level bits
    - drm/vc4: crtc: Rename HDMI encoder type to HDMI0
    - drm/vc4: crtc: Add HDMI1 encoder type
    - drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt
    - drm/vc4: crtc: Disable color management for HVS5
    - dt-bindings: display: vc4: pv: Add BCM2711 pixel valves
    - drm/vc4: crtc: Add BCM2711 pixelvalves
    - drm/vc4: hdmi: Use debugfs private field
    - drm/vc4: hdmi: Move structure to header
    - drm/vc4: hdmi: rework connectors and encoders
    - drm/vc4: hdmi: Rename hdmi to vc4_hdmi
    - drm/vc4: hdmi: Move accessors to vc4_hdmi
    - drm/vc4: hdmi: Use local vc4_hdmi directly
    - drm/vc4: hdmi: Add container_of macros for encoders and connectors
    - drm/vc4: hdmi: Pass vc4_hdmi to CEC code
    - drm/vc4: hdmi: Remove vc4_dev hdmi pointer
    - drm/vc4: hdmi: Remove vc4_hdmi_connector
    - drm/vc4: hdmi: Introduce resource init and variant
    - drm/vc4: hdmi: Implement a register layout abstraction
    - drm/vc4: hdmi: Add reset callback
    - drm/vc4: hdmi: Add PHY init and disable function
    - drm/vc4: hdmi: Add PHY RNG enable / disable function
    - drm/vc4: hdmi: Add a CSC setup callback
    - drm/vc4: hdmi: Add a set_timings callback
    - drm/vc4: hdmi: Add HDMI ID
    - drm/vc4: hdmi: Deal with multiple debugfs files
    - drm/vc4: hdmi: Add an audio support flag
    - drm/vc4: hdmi: Move CEC init to its own function
    - drm/vc4: hdmi: Add CEC support flag
    - drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define
    - drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid
    - drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate
    - drm/vc4: hdmi: Support the BCM2711 HDMI controllers
    - dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings
    - ARM: dts: bcm2711: Enable the display pipeline
    - [DOWNSTREAM] ARM: dts: rpi4: Disable KMS driver by default
    - dtoverlays: Add Pi4 version of vc4-kms-v3d
    - drm: Checking of the pitch is only valid for linear formats
    - drm/vc4: Add support for DRM_FORMAT_P030 to vc4 planes
    - Fixup P030 support
    - drm/vc4: The check for assigned HVS channels is not applicable firmware_kms
    - dt: Update v3d to use firmware_clocks.
    - drm/vc4: Reset audio infoframe on encoder_enable if previously streaming
    - drm/vc4: Set the b-frame marker to the match ALSA's default.
    - dts: Add reg-names for the HDMI registers on bcm2835
    - dt: Add HDMI audio dma values to bcm2711.dtsi
    - drm/vc4: Use reg-names to configure HDMI audio.
    - drm/vc4: Add audio initialisation for Pi4.
    - drm/vc4: Enable audio on Pi4.
    - drm/vc4: Alter the HDMI state machine clock calc to allow for 1920x1200
    - dtoverlays: Remove comment about vc4-kms-v3d locking up X from README
    - drm/vc4: Kick the core clock up during a mode change
    - drm/vc4: Fixup for firmware KMS
    - drm/vc4: Fixup plane init within firmware-kms
    - drm/vc4-hdmi: Give the HDMI audio instances different names
    - i2c: brcmstb: The interrupt line is optional, so use
      platform_get_irq_optional
    - dt: Drop I2C for Pi4 HDMI interfaces to 97.5kHz.
    - overlays: Add missing rpi-poe parameters
    - vc4_hdmi_phy: Fix offset calculation
    - overlays: Add overlay_map
    - overlays: Formally rename/deprecate old overlays
    - overlays: Add vc4-kms-v3d-pi4 to overlay_map
    - Add upstream and upstream-pi4 to overlay_map

  [ Ubuntu: 5.4.0-23.27 ]

  * Miscellaneous Ubuntu changes
    - [Packaging] Enable riscv64 build

  [ Ubuntu: 5.4.0-22.26 ]

  * focal/linux: 5.4.0-22.26 -proposed tracker (LP: #1870502)
  * Packaging resync (LP: #1786013)
    - [Packaging] update variants
    - [Packaging] update helper scripts
    - update dkms package versions
  * [SFC-0316]sync mainline kernel 5.7rc1 SFC patchset into ubuntu HWE kernel
    branch (LP: #1867588)
    - spi: Allow SPI controller override device buswidth
    - spi: HiSilicon v3xx: Properly set CMD_CONFIG for Dual/Quad modes
    - spi: HiSilicon v3xx: Use DMI quirk to set controller buswidth override bits
  * [hns3-0316]sync mainline kernel 5.6rc4  hns3 patchset into ubuntu HWE kernel
    branch (LP: #1867586)
    - net: hns3: fix VF VLAN table entries inconsistent issue
    - net: hns3: fix RMW issue for VLAN filter switch
    - net: hns3: clear port base VLAN when unload PF
  * [sas-0316]sync mainline kernel 5.6rc1 roce patchset into ubuntu HWE kernel
    branch (LP: #1867587)
    - scsi: hisi_sas: use threaded irq to process CQ interrupts
    - scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with
      spin_lock/spin_unlock
    - scsi: hisi_sas: Replace magic number when handle channel interrupt
    - scsi: hisi_sas: Modify the file permissions of trigger_dump to write only
    - scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic
      affinity
    - scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask
  * Revert "nvme_fc: add module to ops template to allow module references"
    (LP: #1869947)
    - SAUCE: Revert "nvme_fc: add module to ops template to allow module
      references"
  * suspend only works once on ThinkPad X1 Carbon gen 7 (LP: #1865570)
    - Revert "UBUNTU: SAUCE: e1000e: Disable s0ix flow for X1 Carbon 7th"
    - SAUCE: e1000e: bump up timeout to wait when ME un-configure ULP mode
  * Focal update: v5.4.29 upstream stable release (LP: #1870142)
    - mmc: core: Allow host controllers to require R1B for CMD6
    - mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard
    - mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command
    - mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
    - mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
    - ACPI: PM: s2idle: Rework ACPI events synchronization
    - cxgb4: fix throughput drop during Tx backpressure
    - cxgb4: fix Txq restart check during backpressure
    - geneve: move debug check after netdev unregister
    - hsr: fix general protection fault in hsr_addr_is_self()
    - ipv4: fix a RCU-list lock in inet_dump_fib()
    - macsec: restrict to ethernet devices
    - mlxsw: pci: Only issue reset when system is ready
    - mlxsw: spectrum_mr: Fix list iteration in error path
    - net/bpfilter: fix dprintf usage for /dev/kmsg
    - net: cbs: Fix software cbs to consider packet sending time
    - net: dsa: Fix duplicate frames flooded by learning
    - net: dsa: mt7530: Change the LINK bit to reflect the link status
    - net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop
    - net: ena: Add PCI shutdown handler to allow safe kexec
    - net: mvneta: Fix the case where the last poll did not process all rx
    - net/packet: tpacket_rcv: avoid a producer race condition
    - net: phy: dp83867: w/a for fld detect threshold bootstrapping issue
    - net: phy: mdio-bcm-unimac: Fix clock handling
    - net: phy: mdio-mux-bcm-iproc: check clk_prepare_enable() return value
    - net: qmi_wwan: add support for ASKEY WWHC050
    - net/sched: act_ct: Fix leak of ct zone template on replace
    - net_sched: cls_route: remove the right filter from hashtable
    - net_sched: hold rtnl lock in tcindex_partial_destroy_work()
    - net_sched: keep alloc_hash updated after hash allocation
    - net: stmmac: dwmac-rk: fix error path in rk_gmac_probe
    - NFC: fdp: Fix a signedness bug in fdp_nci_send_patch()
    - r8169: re-enable MSI on RTL8168c
    - slcan: not call free_netdev before rtnl_unlock in slcan_open
    - tcp: also NULL skb->dev when copy was needed
    - tcp: ensure skb->dev is NULL before leaving TCP stack
    - tcp: repair: fix TCP_QUEUE_SEQ implementation
    - vxlan: check return value of gro_cells_init()
    - bnxt_en: Fix Priority Bytes and Packets counters in ethtool -S.
    - bnxt_en: fix memory leaks in bnxt_dcbnl_ieee_getets()
    - bnxt_en: Return error if bnxt_alloc_ctx_mem() fails.
    - bnxt_en: Free context memory after disabling PCI in probe error path.
    - bnxt_en: Reset rings if ring reservation fails during open()
    - net: ip_gre: Separate ERSPAN newlink / changelink callbacks
    - net: ip_gre: Accept IFLA_INFO_DATA-less configuration
    - hsr: use rcu_read_lock() in hsr_get_node_{list/status}()
    - hsr: add restart routine into hsr_get_node_list()
    - hsr: set .netnsok flag
    - net/mlx5: DR, Fix postsend actions write length
    - net/mlx5e: Enhance ICOSQ WQE info fields
    - net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset
    - net/mlx5e: Fix ICOSQ recovery flow with Striding RQ
    - net/mlx5e: Do not recover from a non-fatal syndrome
    - cgroup-v1: cgroup_pidlist_next should update position index
    - nfs: add minor version to nfs_server_key for fscache
    - cpupower: avoid multiple definition with gcc -fno-common
    - drivers/of/of_mdio.c:fix of_mdiobus_register()
    - cgroup1: don't call release_agent when it is ""
    - [Config] updateconfigs for DPAA_ERRATUM_A050385
    - dt-bindings: net: FMan erratum A050385
    - arm64: dts: ls1043a: FMan erratum A050385
    - fsl/fman: detect FMan erratum A050385
    - drm/amd/display: update soc bb for nv14
    - drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20
    - drm/exynos: Fix cleanup of IOMMU related objects
    - iommu/vt-d: Silence RCU-list debugging warnings
    - s390/qeth: don't reset default_out_queue
    - s390/qeth: handle error when backing RX buffer
    - scsi: ipr: Fix softlockup when rescanning devices in petitboot
    - mac80211: Do not send mesh HWMP PREQ if HWMP is disabled
    - dpaa_eth: Remove unnecessary boolean expression in dpaa_get_headroom
    - sxgbe: Fix off by one in samsung driver strncpy size arg
    - net: hns3: fix "tc qdisc del" failed issue
    - iommu/vt-d: Fix debugfs register reads
    - iommu/vt-d: Populate debugfs if IOMMUs are detected
    - iwlwifi: mvm: fix non-ACPI function
    - i2c: hix5hd2: add missed clk_disable_unprepare in remove
    - Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()
    - Input: fix stale timestamp on key autorepeat events
    - Input: synaptics - enable RMI on HP Envy 13-ad105ng
    - Input: avoid BIT() macro usage in the serio.h UAPI header
    - IB/rdmavt: Free kernel completion queue when done
    - RDMA/core: Fix missing error check on dev_set_name()
    - gpiolib: Fix irq_disable() semantics
    - RDMA/nl: Do not permit empty devices names during RDMA_NLDEV_CMD_NEWLINK/SET
    - RDMA/mad: Do not crash if the rdma device does not have a umad interface
    - ceph: check POOL_FLAG_FULL/NEARFULL in addition to OSDMAP_FULL/NEARFULL
    - ceph: fix memory leak in ceph_cleanup_snapid_map()
    - ARM: dts: dra7: Add bus_dma_limit for L3 bus
    - ARM: dts: omap5: Add bus_dma_limit for L3 bus
    - x86/ioremap: Fix CONFIG_EFI=n build
    - perf probe: Fix to delete multiple probe event
    - perf probe: Do not depend on dwfl_module_addrsym()
    - rtlwifi: rtl8188ee: Fix regression due to commit d1d1a96bdb44
    - tools: Let O= makes handle a relative path with -C option
    - scripts/dtc: Remove redundant YYLOC global declaration
    - scsi: sd: Fix optimal I/O size for devices that change reported values
    - nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute type
    - mac80211: drop data frames without key on encrypted links
    - mac80211: mark station unauthorized before key removal
    - mm/swapfile.c: move inode_lock out of claim_swapfile
    - drivers/base/memory.c: indicate all memory blocks as removable
    - mm/sparse: fix kernel crash with pfn_section_valid check
    - mm: fork: fix kernel_stack memcg stats for various stack implementations
    - gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk
    - gpiolib: acpi: Rework honor_wakeup option into an ignore_wake option
    - gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT + AXP288 model
    - bpf: Fix cgroup ref leak in cgroup_bpf_inherit on out-of-memory
    - RDMA/core: Ensure security pkey modify is not lost
    - afs: Fix handling of an abort from a service handler
    - genirq: Fix reference leaks on irq affinity notifiers
    - xfrm: handle NETDEV_UNREGISTER for xfrm device
    - vti[6]: fix packet tx through bpf_redirect() in XinY cases
    - RDMA/mlx5: Fix the number of hwcounters of a dynamic counter
    - RDMA/mlx5: Fix access to wrong pointer while performing flush due to error
    - RDMA/mlx5: Block delay drop to unprivileged users
    - xfrm: fix uctx len check in verify_sec_ctx_len
    - xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire
    - xfrm: policy: Fix doulbe free in xfrm_policy_timer
    - afs: Fix client call Rx-phase signal handling
    - afs: Fix some tracing details
    - afs: Fix unpinned address list during probing
    - ieee80211: fix HE SPR size calculation
    - mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX
    - netfilter: flowtable: reload ip{v6}h in nf_flow_tuple_ip{v6}
    - netfilter: nft_fwd_netdev: validate family and chain type
    - netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
    - i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status()
    - bpf, x32: Fix bug with JMP32 JSET BPF_X checking upper bits
    - bpf: Initialize storage pointers to NULL to prevent freeing garbage pointer
    - bpf/btf: Fix BTF verification of enum members in struct/union
    - bpf, sockmap: Remove bucket->lock from sock_{hash|map}_free
    - ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection
    - vti6: Fix memory leak of skb if input policy check fails
    - r8169: fix PHY driver check on platforms w/o module softdeps
    - clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
    - USB: serial: option: add support for ASKEY WWHC050
    - USB: serial: option: add BroadMobi BM806U
    - USB: serial: option: add Wistron Neweb D19Q1
    - USB: cdc-acm: restore capability check order
    - USB: serial: io_edgeport: fix slab-out-of-bounds read in
      edge_interrupt_callback
    - usb: musb: fix crash with highmen PIO and usbmon
    - media: flexcop-usb: fix endpoint sanity check
    - media: usbtv: fix control-message timeouts
    - staging: kpc2000: prevent underflow in cpld_reconfigure()
    - staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device table
    - staging: wlan-ng: fix ODEBUG bug in prism2sta_disconnect_usb
    - staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
    - ahci: Add Intel Comet Lake H RAID PCI ID
    - libfs: fix infoleak in simple_attr_read()
    - media: ov519: add missing endpoint sanity checks
    - media: dib0700: fix rc endpoint lookup
    - media: stv06xx: add missing descriptor sanity checks
    - media: xirlink_cit: add missing descriptor sanity checks
    - media: v4l2-core: fix a use-after-free bug of sd->devnode
    - update wireguard dkms package version
    - [Config] updateconfigs for NET_REDIRECT
    - net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build
    - Linux 5.4.29
  * Restore kernel control of PCIe DPC via option (LP: #1869423)
    - PCI/DPC: Add "pcie_ports=dpc-native" to allow DPC without AER control
  * swap storms kills interactive use (LP: #1861359)
    - SAUCE: mm/page_alloc.c: disable memory reclaim watermark boosting by default
  * sysfs: incorrect network device permissions on network namespace change
    (LP: #1865359)
    - sysfs: add sysfs_file_change_owner()
    - sysfs: add sysfs_link_change_owner()
    - sysfs: add sysfs_group{s}_change_owner()
    - sysfs: add sysfs_change_owner()
    - device: add device_change_owner()
    - drivers/base/power: add dpm_sysfs_change_owner()
    - net-sysfs: add netdev_change_owner()
    - net-sysfs: add queue_change_owner()
    - net: fix sysfs permssions when device changes network namespace
    - sysfs: fix static inline declaration of sysfs_groups_change_owner()
  * Kernel Oops - general protection fault: 0000 [#1] SMP PTI after
    disconnecting thunderbolt docking station (LP: #1864754)
    - SAUCE: ptp: free ptp clock properly
  * [Selftests] Apply various fixes and improvements (LP: #1870543)
    - SAUCE: selftests: net: ip_defrag: limit packet to 1000 fragments
    - SAUCE: kselftest/runner: avoid using timeout if timeout is disabled
    - SAUCE: selftests/seccomp -- Disable timeout for seccomp tests
  * Focal update: v5.4.28 upstream stable release (LP: #1869061)
    - locks: fix a potential use-after-free problem when wakeup a waiter
    - locks: reinstate locks_delete_block optimization
    - spi: spi-omap2-mcspi: Support probe deferral for DMA channels
    - drm/mediatek: Find the cursor plane instead of hard coding it
    - phy: ti: gmii-sel: fix set of copy-paste errors
    - phy: ti: gmii-sel: do not fail in case of gmii
    - ARM: dts: dra7-l4: mark timer13-16 as pwm capable
    - spi: qup: call spi_qup_pm_resume_runtime before suspending
    - powerpc: Include .BTF section
    - cifs: fix potential mismatch of UNC paths
    - cifs: add missing mount option to /proc/mounts
    - ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
    - spi: pxa2xx: Add CS control clock quirk
    - spi/zynqmp: remove entry that causes a cs glitch
    - drm/exynos: dsi: propagate error value and silence meaningless warning
    - drm/exynos: dsi: fix workaround for the legacy clock name
    - drm/exynos: hdmi: don't leak enable HDMI_EN regulator if probe fails
    - drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition
    - drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer
    - altera-stapl: altera_get_note: prevent write beyond end of 'key'
    - dm bio record: save/restore bi_end_io and bi_integrity
    - dm integrity: use dm_bio_record and dm_bio_restore
    - riscv: avoid the PIC offset of static percpu data in module beyond 2G limits
    - ASoC: stm32: sai: manage rebind issue
    - spi: spi_register_controller(): free bus id on error paths
    - riscv: Force flat memory model with no-mmu
    - riscv: Fix range looking for kernel image memblock
    - drm/amdgpu: clean wptr on wb when gpu recovery
    - drm/amd/display: Clear link settings on MST disable connector
    - drm/amd/display: fix dcc swath size calculations on dcn1
    - xenbus: req->body should be updated before req->state
    - xenbus: req->err should be updated before req->state
    - block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
    - parse-maintainers: Mark as executable
    - binderfs: use refcount for binder control devices too
    - Revert "drm/fbdev: Fallback to non tiled mode if all tiles not present"
    - usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
    - USB: serial: option: add ME910G1 ECM composition 0x110b
    - usb: host: xhci-plat: add a shutdown
    - USB: serial: pl2303: add device-id for HP LD381
    - usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
    - usb: typec: ucsi: displayport: Fix NULL pointer dereference
    - usb: typec: ucsi: displayport: Fix a potential race during registration
    - USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
    - USB: cdc-acm: fix rounding error in TIOCSSERIAL
    - ALSA: line6: Fix endless MIDI read loop
    - ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662
    - ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662
    - ALSA: seq: virmidi: Fix running status after receiving sysex
    - ALSA: seq: oss: Fix running status after receiving sysex
    - ALSA: pcm: oss: Avoid plugin buffer overflow
    - ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
    - tty: fix compat TIOCGSERIAL leaking uninitialized memory
    - tty: fix compat TIOCGSERIAL checking wrong function ptr
    - iio: chemical: sps30: fix missing triggered buffer dependency
    - iio: st_sensors: remap SMO8840 to LIS2DH12
    - iio: trigger: stm32-timer: disable master mode when stopping
    - iio: accel: adxl372: Set iio_chan BE
    - iio: magnetometer: ak8974: Fix negative raw values in sysfs
    - iio: adc: stm32-dfsdm: fix sleep in atomic context
    - iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
    - iio: light: vcnl4000: update sampling periods for vcnl4200
    - iio: light: vcnl4000: update sampling periods for vcnl4040
    - mmc: rtsx_pci: Fix support for speed-modes that relies on tuning
    - mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
    - mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier
    - CIFS: fiemap: do not return EINVAL if get nothing
    - kbuild: Disable -Wpointer-to-enum-cast
    - staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
    - staging: greybus: loopback_test: fix poll-mask build breakage
    - staging/speakup: fix get_word non-space look-ahead
    - intel_th: msu: Fix the unexpected state warning
    - intel_th: Fix user-visible error codes
    - intel_th: pci: Add Elkhart Lake CPU support
    - modpost: move the namespace field in Module.symvers last
    - rtc: max8907: add missing select REGMAP_IRQ
    - arm64: compat: Fix syscall number of compat_clock_getres
    - xhci: Do not open code __print_symbolic() in xhci trace events
    - btrfs: fix log context list corruption after rename whiteout error
    - drm/amd/amdgpu: Fix GPR read from debugfs (v2)
    - drm/lease: fix WARNING in idr_destroy
    - stm class: sys-t: Fix the use of time_after()
    - memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
    - mm, memcg: fix corruption on 64-bit divisor in memory.high throttling
    - mm, memcg: throttle allocators based on ancestral memory.high
    - mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case
    - mm: do not allow MADV_PAGEOUT for CoW pages
    - epoll: fix possible lost wakeup on epoll_ctl() path
    - mm: slub: be more careful about the double cmpxchg of freelist
    - mm, slub: prevent kmalloc_node crashes and memory leaks
    - page-flags: fix a crash at SetPageError(THP_SWAP)
    - x86/mm: split vmalloc_sync_all()
    - futex: Fix inode life-time issue
    - futex: Unbreak futex hashing
    - arm64: smp: fix smp_send_stop() behaviour
    - arm64: smp: fix crash_smp_send_stop() behaviour
    - nvmet-tcp: set MSG_MORE only if we actually have more to send
    - drm/bridge: dw-hdmi: fix AVI frame colorimetry
    - staging: greybus: loopback_test: fix potential path truncation
    - staging: greybus: loopback_test: fix potential path truncations
    - Linux 5.4.28
  * Pop sound from build-in speaker during cold boot and resume from S3
    (LP: #1866357) // Focal update: v5.4.28 upstream stable release
    (LP: #1869061)
    - ALSA: hda/realtek: Fix pop noise on ALC225
  * Focal update: v5.4.28 upstream stable release (LP: #1869061)
    - perf/x86/amd: Add support for Large Increment per Cycle Events
    - EDAC/amd64: Add family ops for Family 19h Models 00h-0Fh
    - x86/MCE/AMD, EDAC/mce_amd: Add new Load Store unit McaType
    - EDAC/mce_amd: Always load on SMCA systems
    - x86/amd_nb: Add Family 19h PCI IDs
    - EDAC/amd64: Drop some family checks for newer systems
  * Update mpt3sas Driver to 33.100.00.00 for Ubuntu 20.04 (LP: #1863574)
    - scsi: mpt3sas: Register trace buffer based on NVDATA settings
    - scsi: mpt3sas: Display message before releasing diag buffer
    - scsi: mpt3sas: Free diag buffer without any status check
    - scsi: mpt3sas: Maintain owner of buffer through UniqueID
    - scsi: mpt3sas: clear release bit when buffer reregistered
    - scsi: mpt3sas: Reuse diag buffer allocated at load time
    - scsi: mpt3sas: Add app owned flag support for diag buffer
    - scsi: mpt3sas: Fail release cmnd if diag buffer is released
    - scsi: mpt3sas: Use Component img header to get Package ver
    - scsi: mpt3sas: Fix module parameter max_msix_vectors
    - scsi: mpt3sas: Bump mpt3sas driver version to 32.100.00.00
    - scsi: mpt3sas: Clean up some indenting
    - scsi: mpt3sas: change allocation option
    - scsi: mpt3sas: Update MPI Headers to v02.00.57
    - scsi: mpt3sas: Add support for NVMe shutdown
    - scsi: mpt3sas: renamed _base_after_reset_handler function
    - scsi: mpt3sas: Add support IOCs new state named COREDUMP
    - scsi: mpt3sas: Handle CoreDump state from watchdog thread
    - scsi: mpt3sas: print in which path firmware fault occurred
    - scsi: mpt3sas: Optimize mpt3sas driver logging
    - scsi: mpt3sas: Print function name in which cmd timed out
    - scsi: mpt3sas: Remove usage of device_busy counter
    - scsi: mpt3sas: Update drive version to 33.100.00.00
  * Ubuntu 20.04: megaraid_sas driver update to version 07.713.01.00-rc1
    (LP: #1863581)
    - scsi: megaraid_sas: Unique names for MSI-X vectors
    - scsi: megaraid_sas: remove unused variables 'debugBlk','fusion'
    - compat_ioctl: use correct compat_ptr() translation in drivers
    - scsi: megaraid_sas: Make poll_aen_lock static
    - scsi: megaraid_sas: Reset adapter if FW is not in READY state after device
      resume
    - scsi: megaraid_sas: Set no_write_same only for Virtual Disk
    - scsi: megaraid_sas: Update optimal queue depth for SAS and NVMe devices
    - scsi: megaraid_sas: Do not kill host bus adapter, if adapter is already dead
    - scsi: megaraid_sas: Do not kill HBA if JBOD Seqence map or RAID map is
      disabled
    - scsi: megaraid_sas: Do not set HBA Operational if FW is not in operational
      state
    - scsi: megaraid_sas: Re-Define enum DCMD_RETURN_STATUS
    - scsi: megaraid_sas: Limit the number of retries for the IOCTLs causing
      firmware fault
    - scsi: megaraid_sas: Use Block layer API to check SCSI device in-flight IO
      requests
    - scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1
    - scsi: megaraid_sas: fixup MSIx interrupt setup during resume

 -- Juerg Haefliger <email address hidden>  Wed, 08 Apr 2020 08:34:24 +0200

Upload details

Uploaded by:
Juerg Haefliger on 2020-04-08
Uploaded to:
Focal
Original maintainer:
Ubuntu Kernel Team
Architectures:
armhf arm64
Section:
devel
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Focal release on 2020-04-21 main devel

Builds

Focal: [FULLYBUILT] arm64 [FULLYBUILT] armhf

Downloads

File Size SHA-256 Checksum
linux-raspi_5.4.0.orig.tar.gz 162.4 MiB 805f3ed93854317814c59caf2dbfd2097745685f95c8c18b509c9347dcc7d51f
linux-raspi_5.4.0-1008.8.diff.gz 6.8 MiB 193ac682b1849d687366f2463e76a5a9405002ca0079866fa3e82b90bf358e72
linux-raspi_5.4.0-1008.8.dsc 3.7 KiB a33f0c00a23ada6e85d1c3875cdf7ffa1da0017b6e11a3f9d2e0729bd7ece0d1

View changes file

Binary packages built by this source

linux-buildinfo-5.4.0-1008-raspi: No summary available for linux-buildinfo-5.4.0-1008-raspi in ubuntu groovy.

No description available for linux-buildinfo-5.4.0-1008-raspi in ubuntu groovy.

linux-headers-5.4.0-1008-raspi: No summary available for linux-headers-5.4.0-1008-raspi in ubuntu groovy.

No description available for linux-headers-5.4.0-1008-raspi in ubuntu groovy.

linux-image-5.4.0-1008-raspi: No summary available for linux-image-5.4.0-1008-raspi in ubuntu groovy.

No description available for linux-image-5.4.0-1008-raspi in ubuntu groovy.

linux-image-5.4.0-1008-raspi-dbgsym: Linux kernel debug image for version 5.4.0 on ARMv8 SMP

 This package provides the kernel debug image for version 5.4.0 on
 ARMv8 SMP.
 .
 This is for sites that wish to debug the kernel.
 .
 The kernel image contained in this package is NOT meant to boot from. It
 is uncompressed, and unstripped. This package also includes the
 unstripped modules.

linux-modules-5.4.0-1008-raspi: Linux kernel extra modules for version 5.4.0 on ARMv8 SMP

 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-raspi meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

linux-raspi-headers-5.4.0-1008: Header files related to Linux kernel version 5.4.0

 This package provides kernel header files for version 5.4.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-raspi-headers-5.4.0-1008/debian.README.gz for details

linux-raspi-tools-5.4.0-1008: Linux kernel version specific tools for version 5.4.0-1008

 This package provides the architecture dependant parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version 5.4.0-1008 on
 ARMv8.
 You probably want to install linux-tools-5.4.0-1008-<flavour>.

linux-tools-5.4.0-1008-raspi: Linux kernel version specific tools for version 5.4.0-1008

 This package provides the architecture dependant parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version 5.4.0-1008 on
 ARMv8.