Ubuntu
linux-source-2.6.17 package

cannot install drivers to Soundblaster AudigySL

Bug #42718 reported by kripken on 2006-05-03
10
Affects Status Importance Assigned to Milestone
​ linux-source-2.6.17 (Ubuntu)
Invalid
Low
Unassigned
Also affects project (?) Also affects distribution/package Nominate for series

Bug Description

I have no sound since I reinstalled ubuntu. It worked fine on the Live-CD and in windows after I installed some drivers, but in ubuntu it just does'nt work!

1)
root@m-desktop:/home/m4rt1na# tail -2/proc/asound/oss/sndstat

tail: invalid option -- 2
Try `tail --help' for more information.

The same line but without 2:

Midi devices:
0: CA0106 MPU-401 (UART)

Timers:
31: system timer

Mixers:
0: mixer00
1: Realtek ALC655 rev 0
root@m-desktop:/home/m4rt1na#

2)amixer
root@m-desktop:/home/m4rt1na# amixer
Simple mixer control 'Line in',0
  Capabilities: cvolume cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 255
  Front Left: Capture 207 [81%] [on]
  Front Right: Capture 207 [81%] [on]
Simple mixer control 'Mic',0
  Capabilities: cvolume cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 255
  Front Left: Capture 0 [0%] [off]
  Front Right: Capture 0 [0%] [off]
Simple mixer control 'Phone',0
  Capabilities: cvolume cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 255
  Front Left: Capture 207 [81%] [off]
  Front Right: Capture 207 [81%] [off]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958 Center/LFE',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%]
  Front Right: Playback 255 [100%]
Simple mixer control 'IEC958 Front',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%]
  Front Right: Playback 255 [100%]
Simple mixer control 'IEC958 Rear',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%]
  Front Right: Playback 255 [100%]
Simple mixer control 'IEC958 Unknown',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%]
  Front Right: Playback 255 [100%]
Simple mixer control 'Aux',0
  Capabilities: cvolume cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 255
  Front Left: Capture 207 [81%] [off]
  Front Right: Capture 207 [81%] [off]
Simple mixer control 'Analog Center/LFE',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 190 [75%]
  Front Right: Playback 190 [75%]
Simple mixer control 'Analog Front',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 160 [63%]
  Front Right: Playback 160 [63%]
Simple mixer control 'Analog Rear',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 115 [45%]
  Front Right: Playback 115 [45%]
Simple mixer control 'Analog Side',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 110 [43%]
  Front Right: Playback 110 [43%]
Simple mixer control 'CAPTURE feedback',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 135 [53%]
  Front Right: Playback 135 [53%]
Simple mixer control 'Digital Capture Source',0
  Capabilities: enum
  Items: 'IEC958 out' 'i2s mixer out' 'IEC958 in' 'i2s in' 'AC97 in' 'SRC out'
  Item0: 'i2s in'
Simple mixer control 'Shared Mic/Line in',0
  Capabilities: enum
  Items: 'Line in' 'Mic in'
  Item0: 'Line in'

3) lscpi -nv

root@m-desktop:/home/m4rt1na# lspci -nv
00:00.0 0600: 1106:0296
        Subsystem: 1106:0296
        Flags: bus master, 66MHz, medium devsel, latency 8
        Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [80] AGP version 3.5
        Capabilities: [50] Power Management version 2

00:00.1 0600: 1106:1296
        Subsystem: 1106:1296
        Flags: bus master, medium devsel, latency 0

00:00.2 0600: 1106:2296
        Subsystem: 1106:2296
        Flags: bus master, medium devsel, latency 0

00:00.3 0600: 1106:3296
        Subsystem: 1106:3296
        Flags: bus master, medium devsel, latency 0

00:00.4 0600: 1106:4296
        Subsystem: 1106:4296
        Flags: bus master, medium devsel, latency 0

00:00.7 0600: 1106:7296
        Subsystem: 1106:7296
        Flags: bus master, medium devsel, latency 0

00:01.0 0604: 1106:b198
        Flags: bus master, 66MHz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: f3e00000-f7efffff
        Prefetchable memory behind bridge: d3d00000-f3cfffff
        Capabilities: [70] Power Management version 2

00:09.0 0401: 1102:0007
        Subsystem: 1102:100a
        Flags: bus master, medium devsel, latency 64, IRQ 193
        I/O ports at ec00 [size=32]
        Capabilities: [dc] Power Management version 2

00:0f.0 0101: 1106:3149 (rev 80) (prog-if 8f)
        Subsystem: 1106:3149
        Flags: bus master, medium devsel, latency 64, IRQ 169
        I/O ports at e880 [size=8]
        I/O ports at e800 [size=4]
        I/O ports at e480 [size=8]
        I/O ports at e400 [size=4]
        I/O ports at e080 [size=16]
        I/O ports at d800 [size=256]
        Capabilities: [c0] Power Management version 2

00:0f.1 0101: 1106:0571 (rev 06) (prog-if 8a)
        Subsystem: 1106:0571
        Flags: bus master, medium devsel, latency 32, IRQ 169
        I/O ports at fc00 [size=16]
        Capabilities: [c0] Power Management version 2

00:10.0 0c03: 1106:3038 (rev 81)
        Subsystem: 1106:3038
        Flags: bus master, medium devsel, latency 64, IRQ 177
        I/O ports at e000 [size=32]
        Capabilities: [80] Power Management version 2

00:10.1 0c03: 1106:3038 (rev 81)
        Subsystem: 1106:3038
        Flags: bus master, medium devsel, latency 64, IRQ 177
        I/O ports at dc00 [size=32]
        Capabilities: [80] Power Management version 2

00:10.2 0c03: 1106:3038 (rev 81)
        Subsystem: 1106:3038
        Flags: bus master, medium devsel, latency 64, IRQ 177
        I/O ports at d480 [size=32]
        Capabilities: [80] Power Management version 2

00:10.3 0c03: 1106:3038 (rev 81)
        Subsystem: 1106:3038
        Flags: bus master, medium devsel, latency 64, IRQ 177
        I/O ports at d400 [size=32]
        Capabilities: [80] Power Management version 2

00:10.4 0c03: 1106:3104 (rev 86) (prog-if 20)
        Subsystem: 1106:3104
        Flags: bus master, medium devsel, latency 64, IRQ 177
        Memory at f7fffc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

00:11.0 0601: 1106:3227
        Subsystem: 1106:3227
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: [c0] Power Management version 2

00:11.5 0401: 1106:3059 (rev 60)
        Subsystem: 1019:aa01
        Flags: medium devsel, IRQ 201
        I/O ports at d000 [size=256]
        Capabilities: [c0] Power Management version 2

00:12.0 0200: 1106:3065 (rev 78)
        Subsystem: 1106:0102
        Flags: bus master, medium devsel, latency 64, IRQ 185
        I/O ports at c800 [size=256]
        Memory at f7fff800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2

01:00.0 0300: 10de:0221 (rev a1)
        Subsystem: 1043:81c7
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
        Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
        Expansion ROM at f7ee0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0

4) asoundconf list

root@m-desktop:/home/m4rt1na# asoundconf list
Names of available sound cards:
CA0106
V8237

5)
root@m-desktop:/home/m4rt1na# cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
cat: /root/.asoundrc*: No such file or directory

6)dmesg
root@m-desktop:/home/m4rt1na# dmesg
[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
[17179569.184000] BIOS-e820: 000000001ffc0000 - 000000001ffce000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001ffce000 - 000000001fff0000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 131008
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 126912 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f8f50
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x10000521 MSFT 0x00000097) @ 0x1ffc0000
[17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x10000521 MSFT 0x00000097) @ 0x1ffc0200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x10000521 MSFT 0x00000097) @ 0x1ffc0390
[17179569.184000] ACPI: OEMB (v001 A M I AMI_OEM 0x10000521 MSFT 0x00000097) @ 0x1ffce040
[17179569.184000] ACPI: DSDT (v001 1ACAJ 1ACAJ000 0x00000000 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 3059.969 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.188000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.188000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179569.200000] Memory: 509672k/524032k available (1910k kernel code, 13836k reserved, 1070k data, 308k init, 0k highmem)
[17179569.200000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.280000] Calibrating delay using timer specific routine.. 6127.04 BogoMIPS (lpj=12254080)
[17179569.280000] Security Framework v1.0.0 initialized
[17179569.280000] SELinux: Disabled at boot.
[17179569.280000] Mount-cache hash table entries: 512
[17179569.280000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000000
[17179569.280000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000000
[17179569.280000] monitor/mwait feature present.
[17179569.280000] using mwait in idle threads.
[17179569.280000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179569.280000] CPU: L2 cache: 256K
[17179569.280000] CPU: Hyper-Threading is disabled
[17179569.280000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000651d 00000000 00000000
[17179569.280000] Checking 'hlt' instruction... OK.
[17179569.296000] SMP alternatives: switching to UP code
[17179569.296000] Freeing SMP alternatives: 16k freed
[17179569.296000] checking if image is initramfs... it is
[17179569.748000] Freeing initrd memory: 5563k freed
[17179569.748000] ACPI: Core revision 20060707
[17179569.748000] ACPI: Looking for DSDT ... not found!
[17179569.752000] CPU0: Intel(R) Celeron(R) CPU 3.06GHz stepping 01
[17179569.752000] Total of 1 processors activated (6127.04 BogoMIPS).
[17179569.752000] ENABLING IO-APIC IRQs
[17179569.752000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179569.896000] Brought up 1 CPUs
[17179569.896000] migration_cost=0
[17179569.896000] NET: Registered protocol family 16
[17179569.896000] EISA bus registered
[17179569.896000] ACPI: bus type pci registered
[17179569.896000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[17179569.896000] PCI: Using configuration type 1
[17179569.896000] Setting up standard PCI resources
[17179569.908000] ACPI: Interpreter enabled
[17179569.908000] ACPI: Using IOAPIC for interrupt routing
[17179569.912000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179569.912000] PCI: Probing PCI hardware (bus 00)
[17179569.916000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[17179569.916000] PCI: Quirk-MSI-K8T Soundcard On
[17179569.916000] PCI: Unexpected Value in PCI-Register: no Change!
[17179569.916000] Boot video device is 0000:01:00.0
[17179569.916000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179569.932000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179569.940000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179569.940000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179569.944000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179569.944000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179569.944000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179569.944000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179569.944000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179569.944000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179569.944000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179569.944000] pnp: PnP ACPI init
[17179569.952000] pnp: PnP ACPI: found 13 devices
[17179569.952000] PnPBIOS: Disabled by ACPI PNP
[17179569.952000] PCI: Using ACPI for IRQ routing
[17179569.952000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179569.956000] pnp: 00:08: ioport range 0xa00-0xa0f has been reserved
[17179569.956000] pnp: 00:08: ioport range 0xa10-0xa1f has been reserved
[17179569.956000] pnp: 00:08: ioport range 0xa20-0xa2f has been reserved
[17179569.956000] pnp: 00:08: ioport range 0xa30-0xa3f has been reserved
[17179569.956000] pnp: 00:08: ioport range 0xa40-0xa4f has been reserved
[17179569.956000] PCI: Bridge: 0000:00:01.0
[17179569.956000] IO window: disabled.
[17179569.956000] MEM window: f3e00000-f7efffff
[17179569.956000] PREFETCH window: d3d00000-f3cfffff
[17179569.956000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179569.956000] NET: Registered protocol family 2
[17179569.996000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179569.996000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179569.996000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179569.996000] TCP: Hash tables configured (established 16384 bind 8192)
[17179569.996000] TCP reno registered
[17179569.996000] audit: initializing netlink socket (disabled)
[17179569.996000] audit(1170524705.996:1): initialized
[17179569.996000] VFS: Disk quotas dquot_6.5.1
[17179569.996000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179569.996000] Initializing Cryptographic API
[17179569.996000] io scheduler noop registered
[17179569.996000] io scheduler anticipatory registered
[17179569.996000] io scheduler deadline registered
[17179569.996000] io scheduler cfq registered (default)
[17179569.996000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179569.996000] isapnp: Scanning for PnP cards...
[17179570.348000] isapnp: No Plug & Play device found
[17179570.396000] Real Time Clock Driver v1.12ac
[17179570.396000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179570.396000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.400000] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.400000] mice: PS/2 mouse device common for all mice
[17179570.400000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.400000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.400000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.400000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179570.400000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179570.400000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.400000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.400000] EISA: Probing bus 0 at eisa.0
[17179570.400000] EISA: Detected 0 cards.
[17179570.400000] TCP bic registered
[17179570.400000] NET: Registered protocol family 1
[17179570.400000] NET: Registered protocol family 8
[17179570.400000] NET: Registered protocol family 20
[17179570.400000] Using IPI No-Shortcut mode
[17179570.400000] ACPI: (supports S0 S1 S3 S4 S5)
[17179570.400000] Freeing unused kernel memory: 308k freed
[17179570.448000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.508000] Capability LSM initialized
[17179571.548000] ACPI: Processor [CPU1] (supports 16 throttling states)
[17179571.548000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179571.548000] ACPI: Getting cpuindex for acpiid 0x2
[17179572.100000] SCSI subsystem initialized
[17179572.100000] libata version 1.20 loaded.
[17179572.104000] sata_via 0000:00:0f.0: version 1.1
[17179572.104000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[17179572.104000] PCI: Via IRQ fixup for 0000:00:0f.0, from 5 to 9
[17179572.104000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179572.108000] ata1: SATA max UDMA/133 cmd 0xE880 ctl 0xE802 bmdma 0xE080 irq 169
[17179572.108000] ata2: SATA max UDMA/133 cmd 0xE480 ctl 0xE402 bmdma 0xE088 irq 169
[17179572.272000] scsi0 : sata_via
[17179572.548000] ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
[17179572.548000] ata2: dev 0 ATA-6, max UDMA/133, 390721968 sectors: LBA48
[17179572.556000] ata2: dev 0 configured for UDMA/133
[17179572.556000] scsi1 : sata_via
[17179572.556000] Vendor: ATA Model: ST3200822AS Rev: 3.01
[17179572.556000] Type: Direct-Access ANSI SCSI revision: 05
[17179572.564000] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[17179572.564000] sda: Write Protect is off
[17179572.564000] sda: Mode Sense: 00 3a 00 00
[17179572.564000] SCSI device sda: drive cache: write back
[17179572.564000] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[17179572.564000] sda: Write Protect is off
[17179572.564000] sda: Mode Sense: 00 3a 00 00
[17179572.564000] SCSI device sda: drive cache: write back
[17179572.564000] sda: sda1 sda2
[17179572.588000] sd 1:0:0:0: Attached scsi disk sda
[17179572.700000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179572.700000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179572.700000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179572.700000] VP_IDE: chipset revision 6
[17179572.700000] VP_IDE: not 100% native mode: will probe irqs later
[17179572.700000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179572.700000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
[17179572.700000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[17179572.700000] Probing IDE interface ide0...
[17179573.268000] Probing IDE interface ide1...
[17179574.132000] hdc: DVDRW 16X16X, ATAPI CD/DVD-ROM drive
[17179574.804000] ide1 at 0x170-0x177,0x376 on irq 15
[17179574.824000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[17179574.824000] Uniform CD-ROM driver Revision: 3.20
[17179574.880000] Probing IDE interface ide0...
[17179574.936000] usbcore: registered new driver usbfs
[17179574.936000] usbcore: registered new driver hub
[17179574.940000] USB Universal Host Controller Interface driver v3.0
[17179574.940000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[17179574.940000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1
[17179574.940000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179574.940000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179574.940000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e000
[17179574.940000] usb usb1: configuration #1 chosen from 1 choice
[17179574.940000] hub 1-0:1.0: USB hub found
[17179574.940000] hub 1-0:1.0: 2 ports detected
[17179575.044000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[17179575.044000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1
[17179575.044000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179575.044000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179575.044000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000dc00
[17179575.044000] usb usb2: configuration #1 chosen from 1 choice
[17179575.044000] hub 2-0:1.0: USB hub found
[17179575.044000] hub 2-0:1.0: 2 ports detected
[17179575.148000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
[17179575.148000] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 1
[17179575.148000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179575.148000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179575.148000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d480
[17179575.148000] usb usb3: configuration #1 chosen from 1 choice
[17179575.148000] hub 3-0:1.0: USB hub found
[17179575.148000] hub 3-0:1.0: 2 ports detected
[17179575.252000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
[17179575.252000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1
[17179575.252000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179575.252000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179575.252000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000d400
[17179575.252000] usb usb4: configuration #1 chosen from 1 choice
[17179575.252000] hub 4-0:1.0: USB hub found
[17179575.252000] hub 4-0:1.0: 2 ports detected
[17179575.364000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[17179575.364000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1
[17179575.364000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179575.364000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179575.364000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xf7fffc00
[17179575.364000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179575.364000] usb usb5: configuration #1 chosen from 1 choice
[17179575.364000] hub 5-0:1.0: USB hub found
[17179575.364000] hub 5-0:1.0: 8 ports detected
[17179575.412000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[17179575.536000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179575.536000] EXT3-fs: write access will be enabled during recovery.
[17179576.796000] usb 1-2: new low speed USB device using uhci_hcd and address 3
[17179576.976000] usb 1-2: configuration #1 chosen from 1 choice
[17179576.988000] usbcore: registered new driver hiddev
[17179577.004000] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input1
[17179577.004000] input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.0-2
[17179577.004000] usbcore: registered new driver usbhid
[17179577.004000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179596.660000] kjournald starting. Commit interval 5 seconds
[17179596.660000] EXT3-fs: sda1: orphan cleanup on readonly fs
[17179596.660000] ext3_orphan_cleanup: deleting unreferenced inode 1336107
[17179596.660000] ext3_orphan_cleanup: deleting unreferenced inode 1336103
[17179596.660000] ext3_orphan_cleanup: deleting unreferenced inode 1336101
[17179596.680000] ext3_orphan_cleanup: deleting unreferenced inode 1336099
[17179596.684000] ext3_orphan_cleanup: deleting unreferenced inode 1336094
[17179596.684000] ext3_orphan_cleanup: deleting unreferenced inode 1336090
[17179596.684000] ext3_orphan_cleanup: deleting unreferenced inode 1336088
[17179596.684000] ext3_orphan_cleanup: deleting unreferenced inode 1336086
[17179596.684000] ext3_orphan_cleanup: deleting unreferenced inode 1336084
[17179596.688000] ext3_orphan_cleanup: deleting unreferenced inode 1336081
[17179596.688000] ext3_orphan_cleanup: deleting unreferenced inode 1336079
[17179596.688000] ext3_orphan_cleanup: deleting unreferenced inode 1336077
[17179596.688000] ext3_orphan_cleanup: deleting unreferenced inode 1336073
[17179596.696000] ext3_orphan_cleanup: deleting unreferenced inode 117401
[17179596.700000] ext3_orphan_cleanup: deleting unreferenced inode 117396
[17179596.700000] ext3_orphan_cleanup: deleting unreferenced inode 117349
[17179596.700000] ext3_orphan_cleanup: deleting unreferenced inode 1333014
[17179596.704000] EXT3-fs: sda1: 17 orphan inodes deleted
[17179596.704000] EXT3-fs: recovery complete.
[17179596.808000] EXT3-fs: mounted filesystem with ordered data mode.
[17179604.652000] Linux agpgart interface v0.101 (c) Dave Jones
[17179604.656000] agpgart: Detected VIA P4M800 chipset
[17179604.660000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179604.688000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179604.692000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179604.844000] input: PC Speaker as /class/input/input2
[17179604.916000] Floppy drive(s): fd0 is 1.44M
[17179604.936000] FDC 0 is a post-1991 82077
[17179605.068000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179605.068000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
[17179605.068000] PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 9
[17179605.072000] eth0: VIA Rhine II at 0x1c800, 00:14:2a:32:a9:44, IRQ 185.
[17179605.180000] eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
[17179605.272000] parport: PnPBIOS parport detected.
[17179605.272000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179605.400000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 193
[17179605.400000] Model 100a Rev 00000000 Serial 100a1102
[17179605.476000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
[17179605.476000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9
[17179605.476000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179605.640000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[17179605.644000] ts: Compaq touchscreen protocol output
[17179606.224000] NET: Registered protocol family 17
[17179606.344000] lp0: using parport0 (interrupt-driven).
[17179606.440000] EXT3 FS on sda1, internal journal
[17179608.360000] kjournald starting. Commit interval 5 seconds
[17179608.372000] EXT3 FS on sda2, internal journal
[17179608.372000] EXT3-fs: mounted filesystem with ordered data mode.
[17179609.800000] NET: Registered protocol family 10
[17179609.800000] lo: Disabled Privacy Extensions
[17179609.800000] IPv6 over IPv4 tunneling driver
[17179613.812000] ACPI: Power Button (FF) [PWRF]
[17179613.812000] ACPI: Sleep Button (CM) [SLPB]
[17179613.812000] ACPI: Power Button (CM) [PWRB]
[17179613.932000] ibm_acpi: ec object not found
[17179613.956000] pcc_acpi: loading...
[17179616.084000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179616.084000] apm: overridden by ACPI.
[17179620.084000] Bluetooth: Core ver 2.8
[17179620.084000] NET: Registered protocol family 31
[17179620.084000] Bluetooth: HCI device and connection manager initialized
[17179620.084000] Bluetooth: HCI socket layer initialized
[17179620.100000] Bluetooth: L2CAP ver 2.8
[17179620.100000] Bluetooth: L2CAP socket layer initialized
[17179620.104000] Bluetooth: RFCOMM socket layer initialized
[17179620.104000] Bluetooth: RFCOMM TTY layer initialized
[17179620.104000] Bluetooth: RFCOMM ver 1.7

7) cat /proc/interrupts

root@m-desktop:/home/m4rt1na# cat /proc/interrupts
           CPU0
  0: 5100329 IO-APIC-edge timer
  1: 27706 IO-APIC-edge i8042
  7: 2 IO-APIC-edge parport0
  8: 3 IO-APIC-edge rtc
  9: 0 IO-APIC-level acpi
 15: 182373 IO-APIC-edge ide1
169: 48069 IO-APIC-level libata
177: 736928 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5
185: 347405 IO-APIC-level eth0
193: 46 IO-APIC-level snd_ca0106
201: 0 IO-APIC-level VIA8237
NMI: 0
LOC: 5100007
ERR: 0
MIS: 0

I have gnome and in the right upper corner there's a soundcontrol, I have a red cross over mine and it can't be changed. "No volume control GSstreamer plugins and/or no devices found"

When I open Mp3files with xmms it says
"please check that your soundcard is configured properly, you have a correct output plugin selected, no other program is blocking the soundcard"

/DiOXiN

See original description
kripken (kripkenstein) wrote :

I forgot to mention that this is in Dapper.

inos (guehring+ubuntu) wrote :

same problem on T20 (cs46xx) using Dapper kernel 2.6.15-23-386
i tryed with alsa, esd and with all options available without success

ciasaboark (ciasaboark) wrote :

I can confirm this on dapper using a soundblaster live. Sound output works fine, and mic input works (i can hear my own voice over the speakers), but recording mic input in any application fails. Only silence is recorded. Mic and capture are both set as the record device, neither are muted, and sound is turned up to 100%. I've seen posts with similar problems on the ubuntu formums, but so far there isn't a solution. If it is a kernel problem it affects as far back as 2.6.15-20 (current is 2.6.15-26). If its not, then I have no idea what package the bug is in.

Ram Sambamurthy (ram-sambamurthy) wrote :

i'm using thinkpad t42. i installed skype and tested using skype's echo service. i could hear the response but couldn't hear myself.

so what i did was go to System>Preferences>Multimedia Systems Selector. The tab shows "Audio".

i changed the default Input Plugin from "ALSA ..." to "OSS..." and the microphone worked.

i read in the help button of the same dialog that different applications use different sound architectures. apparently skype is using OSS instead of ALSA. (this is my conclusion and not verified technically)

hope this helps

Jame (lliyan) wrote : Re: Sound capture on Thinkpad T20, T21, T22 not working

Several months past after this post, now I am using Ubuntu 6.06. No matter "ALSA ..." or "OSS..." , the sound recorder does't work yet. (died after pressing the record button).

I have to up-regulated the importance.

Help.....

Jame (lliyan) wrote :

This problem co-occurs in sound recorder (genome media) and skype.

Jame (lliyan) wrote :

 It is a bug in ubuntu, because it is ok in MEPIS.

Jame (lliyan) wrote :

Thank Capriccio for the following information.
The skype can be worked properly now.

1. backup your existing /etc/modprobe.d/alsa-base
2. append the following to the end of the file:
    options snd-hda-intel model=ref
3. reload your modules or reboot.
4. Audio system set to "OSS" in the skype option.

But Gnome-Media sound-recorder doesn't work yet.

Tony Yarusso (tonyyarusso) wrote :

Confirmed on a Thinkpad T43 with kernel version 2.6.17-10 on Edgy. **This is a regression! Worked on Breezy!**

Tony Yarusso (tonyyarusso) wrote :

Note that this is a regression bug, not a first-check of functionality.

Changed in linux-source-2.6.15:
status: Unconfirmed → Confirmed
Daniel T Chen (crimsun) wrote :

There seems to be _tremendous_ confusion regarding the inability to capture audible audio in Linux on PCI sound devices. For the sake of good bug reporting practices, I'm going to enumerate several commands, the output from which all audio bug reports should include.

1) tail -2 /proc/asound/oss/sndstat

The above command lists the codecs involved. The output from this command is _vital_. Different codecs pushing the same driver (say, intel8x0, emu10k1, or hda-intel) exhibit a huge variation in errata. This bug report alone covers _four_ distinct codecs, none of which are solely to blame. See the following point:

2) amixer

It is _imperative_ that you include the amixer output from your preferred (the one that's giving you said recording problems) audio device. The community has spent years documenting known mixer issues on http://alsa.opensrc.org/ (see drivers). For instance, many of the codecs driving cs46xx, emu10k1, and intel8x0 require multiple elements to be selected, unmuted, and raised to audible levels.

3) lspci -nv

The actual {sub,}{vendor,device} IDs are important. That's how we track whether something exists as a quirk or needs to be added/modified.

4) asoundconf list

This script command (which is really just filtered cat /proc/asound/cards) lists the enumerated sound devices on your system.

5) cat /etc/asound.conf ~/.asoundrc*

We need to know if you've modified any runtime configuration files that affect how alsa-lib interacts with your sound devices. The nonexistence of the above files is not a problem.

6) dmesg

Many codecs and drivers, upon initialisation, will spit something via printk() into the kernel ring buffer. Any diagnostic messages will appear in this output.

And last but certainly not least:

7) cat /proc/interrupts

Sound devices require resources. We need to see if those resources are properly assigned.

Changed in linux-source-2.6.17:
importance: Medium → Low
status: Confirmed → Needs Info
inos (guehring+ubuntu) wrote :

Thinkpad T20 Type 2647-BBG
kernel version 2.6.17-10 on Edgy

same as with dapper

with alsa as intup plugin
plugin test in media setting -> total freez
using gnome-sound-recorder -> total freez

inos (guehring+ubuntu) wrote :

is there any progress??

using sound capture is essential!

DiOXiN (martinaj) on 2007-02-03
description: updated
DiOXiN (martinaj) on 2007-02-03
description: updated
description: updated
Launchpad Janitor (janitor) wrote :

[Expired for linux-source-2.6.17 (Ubuntu) because there has been no activity for 60 days.]

To post a comment you must log in.
This report contains Public information  Edit
Everyone can see this information.
Subscribing...

Other bug subscribers