Ubuntu

“linux” 3.5.0-28.48 source package in Ubuntu

Changelog

linux (3.5.0-28.48) quantal-proposed; urgency=low

  [Brad Figg]

  * Release Tracking Bug
    - LP: #1172023

  [ Steve Conklin ]

  * Revert "drm/i915: GFX_MODE Flush TLB Invalidate Mode must be '1' for
    scanline waits"
    - LP: #1140716

  [ Upstream Kernel Changes ]

  * fbcon: fix locking harder
    - LP: #1167114

linux (3.5.0-28.47) quantal-proposed; urgency=low

  [Steve Conklin]

  * Release Tracking Bug
    - LP: #1166876

  [ Adam Lee ]

  * SAUCE: Bluetooth: Add support for 105b:e065
    - LP: #1161261

  [ John Johansen ]

  * SAUCE: (no-up) apparmor: Fix quieting of audit messages for network
    mediation
    - LP: #1163259

  [ Upstream Kernel Changes ]

  * NFSv4: Fix the string length returned by the idmapper
    - LP: #1101292
  * Input: cypress_ps2 - fix trackpadi found in Dell XPS12
    - LP: #1103594
  * omap_vout: find_vma() needs ->mmap_sem held
    - LP: #1164714
  * nfsd: Fix memleak
    - LP: #1164714
  * iommu/amd: Initialize device table after dma_ops
    - LP: #1164714
  * svcrpc: make svc_age_temp_xprts enqueue under sv_lock
    - LP: #1164714
  * target: Add missing mapped_lun bounds checking during make_mappedlun
    setup
    - LP: #1164714
  * xen-blkback: do not leak mode property
    - LP: #1164714
  * btrfs: Init io_lock after cloning btrfs device struct
    - LP: #1164714
  * NFS: Don't allow NFS silly-renamed files to be deleted, no signal
    - LP: #1164714
  * SUNRPC: Don't start the retransmission timer when out of socket space
    - LP: #1164714
  * storvsc: Initialize the sglist
    - LP: #1164714
  * dc395x: uninitialized variable in device_alloc()
    - LP: #1164714
  * ALSA: bt87x: Make load_all parameter working again
    - LP: #1164714
  * ARM: VFP: fix emulation of second VFP instruction
    - LP: #1164714
  * ARM: fix scheduling while atomic warning in alignment handling code
    - LP: #1164714
  * doc, xen: Mention 'earlyprintk=xen' in the documentation.
    - LP: #1164714
  * doc, kernel-parameters: Document 'console=hvc<n>'
    - LP: #1164714
  * sony-laptop: fully enable SNY controlled modems
    - LP: #1164714
  * x86: Make sure we can boot in the case the BDA contains pure garbage
    - LP: #1164714
  * cifs: ensure that cifs_get_root() only traverses directories
    - LP: #1164714
  * iscsi-target: Fix immediate queue starvation regression with DATAIN
    - LP: #1164714
  * ocfs2: fix ocfs2_init_security_and_acl() to initialize acl correctly
    - LP: #1164714
  * ocfs2: ac->ac_allow_chain_relink=0 won't disable group relink
    - LP: #1164714
  * block: fix ext_devt_idr handling
    - LP: #1164714
  * idr: fix a subtle bug in idr_get_next()
    - LP: #1164714
  * block: fix synchronization and limit check in blk_alloc_devt()
    - LP: #1164714
  * firewire: add minor number range check to fw_device_init()
    - LP: #1164714
  * idr: fix top layer handling
    - LP: #1164714
  * sysctl: fix null checking in bin_dn_node_address()
    - LP: #1164714
  * nbd: fsync and kill block device on shutdown
    - LP: #1164714
  * target/pscsi: Fix page increment
    - LP: #1164714
  * xen/pat: Disable PAT using pat_enabled value.
    - LP: #1164714
  * xen/pci: We don't do multiple MSI's.
    - LP: #1164714
  * xenbus: fix compile failure on ARM with Xen enabled
    - LP: #1164714
  * dm snapshot: add missing module aliases
    - LP: #1164714
  * ext4: convert number of blocks to clusters properly
    - LP: #1164714
  * ata_piix: reenable MS Virtual PC guests
    - LP: #1164714
  * nfsd: add get_uint for u32's
    - LP: #1164714
  * asus-laptop: Do not call HWRS on init
    - LP: #1164714
  * ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs
    - LP: #1164714
  * ata_piix: Add Device IDs for Intel Wellsburg PCH
    - LP: #1164714
  * ata_piix: Add Device IDs for Intel Lynx Point-LP PCH
    - LP: #1164714
  * fs: cachefiles: add support for large files in filesystem caching
    - LP: #1164714
  * fuse: don't WARN when nlink is zero
    - LP: #1164714
  * usb hid quirks for Masterkit MA901 usb radio
    - LP: #1164714
  * pstore: Avoid deadlock in panic and emergency-restart path
    - LP: #1164714
  * unbreak automounter support on 64-bit kernel with 32-bit userspace (v2)
    - LP: #1164714
  * workqueue: consider work function when searching for busy work items
    - LP: #1164714
  * zram: Fix deadlock bug in partial read/write
    - LP: #1164714
  * md: protect against crash upon fsync on ro array
    - LP: #1164714
  * md: fix two bugs when attempting to resize RAID0 array.
    - LP: #1164714
  * md: raid0: fix error return from create_stripe_zones.
    - LP: #1164714
  * ath9k: fix RSSI dummy marker value
    - LP: #1164714
  * ath9k_htc: fix signal strength handling issues
    - LP: #1164714
  * ath9k_hw: improve reset reliability after errors
    - LP: #1164714
  * mwifiex: correct sleep delay counter
    - LP: #1164714
  * libertas: fix crash for SD8688
    - LP: #1164714
  * hw_random: make buffer usable in scatterlist.
    - LP: #1164714
  * drm/i915: Don't clobber crtc->fb when queue_flip fails
    - LP: #1164714
  * ARM: 7657/1: head: fix swapper and idmap population with LPAE and
    big-endian
    - LP: #1164714
  * ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit
    - LP: #1164714
  * userns: Stop oopsing in key_change_session_keyring
    - LP: #1164714
  * hwmon: (pmbus/ltc2978) Fix peak attribute handling
    - LP: #1164714
  * hwmon: (pmbus/ltc2978) Use detected chip ID to select supported
    functionality
    - LP: #1164714
  * hwmon: (sht15) Check return value of regulator_enable()
    - LP: #1164714
  * random: fix locking dependency with the tasklist_lock
    - LP: #1164714
  * ALSA: vmaster: Fix slave change notification
    - LP: #1164714
  * ALSA: ice1712: Initialize card->private_data properly
    - LP: #1164714
  * drm/radeon: add primary dac adj quirk for R200 board
    - LP: #1164714
  * dmi_scan: fix missing check for _DMI_ signature in smbios_present()
    - LP: #1164714
  * Btrfs: account for orphan inodes properly during cleanup
    - LP: #1164714
  * HID: logitech-dj: do not directly call hid_output_raw_report() during
    probe
    - LP: #1164714
  * ftrace: Update the kconfig for DYNAMIC_FTRACE
    - LP: #1164714
  * e1000e: fix pci-device enable-counter balance
    - LP: #1164714
  * Fix memory leak in cpufreq stats.
    - LP: #1164714
  * Btrfs: fix panic when recovering tree log
    - LP: #1164714
  * xen/pciback: Don't disable a PCI device that is already disabled.
    - LP: #1164714
  * vfs: fix pipe counter breakage
    - LP: #1164714
  * Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and
    security keys
    - LP: #1164714
  * drm/i915: Increase the RC6p threshold.
    - LP: #1164714
  * USB: Handle warm reset failure on empty port.
    - LP: #1164714
  * USB: Don't use EHCI port sempahore for USB 3.0 hubs.
    - LP: #1164714
  * USB: Prepare for refactoring by adding extra udev checks.
    - LP: #1164714
  * USB: Rip out recursive call on warm port reset.
    - LP: #1164714
  * USB: Fix connected device switch to Inactive state.
    - LP: #1164714
  * Linux 3.5.7.8
    - LP: #1164714
  * USB: option: add Huawei E5331
    - LP: #1164714
  * USB: storage: fix Huawei mode switching regression
    - LP: #1164714
  * USB: added support for Cinterion's products AH6 and PLS8
    - LP: #1164714
  * ALSA: seq: Fix missing error handling in snd_seq_timer_open()
    - LP: #1164714
  * usb: cp210x new Vendor/Device IDs
    - LP: #1164714
  * staging: vt6656: Fix oops on resume from suspend.
    - LP: #1164714
  * qcaux: add Franklin U600
    - LP: #1164714
  * ext3: Fix format string issues
    - LP: #1164714
  * tty/serial: Add support for Altera serial port
    - LP: #1164714
  * Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards
    - LP: #1164714
  * serial: 8250_pci: add support for another kind of NetMos Technology PCI
    9835 Multi-I/O Controller
    - LP: #1164714
  * tty: serial: fix typo "ARCH_S5P6450"
    - LP: #1164714
  * usb: serial: Add Rigblaster Advantage to device table
    - LP: #1164714
  * w1: fix oops when w1_search is called from netlink connector
    - LP: #1164714
  * USB: cdc-wdm: fix buffer overflow
    - LP: #1164714
  * hwmon: (lineage-pem) Add missing terminating entry for
    pem_[input|fan]_attributes
    - LP: #1164714
  * hwmon: (pmbus/ltc2978) Fix temperature reporting
    - LP: #1164714
  * btrfs: use rcu_barrier() to wait for bdev puts at unmount
    - LP: #1164714
  * hwmon: (sht15) Fix memory leak if regulator_enable() fails
    - LP: #1164714
  * TTY: do not reset master's packet mode
    - LP: #1164714
  * virtio: rng: disallow multiple device registrations, fixes crashes
    - LP: #1164714
  * block: use i_size_write() in bd_set_size()
    - LP: #1164714
  * loopdev: fix a deadlock
    - LP: #1164714
  * loopdev: remove an user triggerable oops
    - LP: #1164714
  * proc connector: reject unprivileged listener bumps
    - LP: #1164714
  * s390: critical section cleanup vs. machine checks
    - LP: #1164714
  * s390/mm: fix flush_tlb_kernel_range()
    - LP: #1164714
  * powerpc: Fix STAB initialization
    - LP: #1164714
  * powerpc: Fix cputable entry for 970MP rev 1.0
    - LP: #1164714
  * atmel_lcdfb: fix 16-bpp modes on older SOCs
    - LP: #1164714
  * selinux: use GFP_ATOMIC under spin_lock
    - LP: #1164714
  * perf,x86: fix kernel crash with PEBS/BTS after suspend/resume
    - LP: #1164714
  * perf,x86: fix link failure for non-Intel configs
    - LP: #1164714
  * perf,x86: fix wrmsr_on_cpu() warning on suspend/resume
    - LP: #1164714
  * l2tp: Restore socket refcount when sendmsg succeeds
    - LP: #1164714
  * rds: limit the size allocated by rds_message_alloc()
    - LP: #1164714
  * net: ipv6: Don't purge default router if accept_ra=2
    - LP: #1164714
  * tcp: fix double-counted receiver RTT when leaving receiver fast path
    - LP: #1164714
  * tun: add a missing nf_reset() in tun_net_xmit()
    - LP: #1164714
  * macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode.
    - LP: #1164714
  * netlabel: correctly list all the static label mappings
    - LP: #1164714
  * netlabel: fix build problems when CONFIG_IPV6=n
    - LP: #1164714
  * bridging: fix rx_handlers return code
    - LP: #1164714
  * ipv6: stop multicast forwarding to process interface scoped addresses
    - LP: #1164714
  * rtnl: fix info leak on RTM_GETLINK request for VF devices
    - LP: #1164714
  * dcbnl: fix various netlink info leaks
    - LP: #1164714
  * 6lowpan: Fix endianness issue in is_addr_link_local().
    - LP: #1164714
  * ahci: Add Device IDs for Intel Lynx Point-LP PCH
    - LP: #1164714
  * ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs
    - LP: #1164714
  * ahci: Add Device IDs for Intel Wellsburg PCH
    - LP: #1164714
  * HID: add support for Sony RF receiver with USB product id 0x0374
    - LP: #1164714
  * HID: clean up quirk for Sony RF receivers
    - LP: #1164714
  * rt2x00: error in configurations with mesh support disabled
    - LP: #1164714
  * mwifiex: fix potential out-of-boundary access to ibss rate table
    - LP: #1164714
  * rtlwifi: rtl8192cu: Fix schedule while atomic bug splat
    - LP: #1164714
  * rtlwifi: rtl8192cu: Fix problem that prevents reassociation
    - LP: #1164714
  * vhost/net: fix heads usage of ubuf_info
    - LP: #1164714
  * udf: avoid info leak on export
    - LP: #1164714
  * isofs: avoid info leak on export
    - LP: #1164714
  * key: Fix resource leak
    - LP: #1164714
  * ext4: fix the wrong number of the allocated blocks in
    ext4_split_extent()
    - LP: #1164714
  * jbd2: fix use after free in jbd2_journal_dirty_metadata()
    - LP: #1164714
  * ext4: use atomic64_t for the per-flexbg free_clusters count
    - LP: #1164714
  * tracing: Fix race in snapshot swapping
    - LP: #1164714
  * cifs: delay super block destruction until all cifsFileInfo objects are
    gone
    - LP: #1164714
  * drm/i915: restrict kernel address leak in debugfs
    - LP: #1164714
  * drm/i915: bounds check execbuffer relocation count
    - LP: #1164714
    - CVE-2013-0913
  * tracing: Fix free of probe entry by calling call_rcu_sched()
    - LP: #1164714
  * tracing: Keep overwrite in sync between regular and snapshot buffers
    - LP: #1164714
  * USB: xhci: correctly enable interrupts
    - LP: #1164714
  * usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 player
    - LP: #1164714
  * drm/radeon: fix backend map setup on 1 RB trinity boards
    - LP: #1164714
  * drm/radeon/benchmark: make sure bo blit copy exists before using it
    - LP: #1164714
  * drm/radeon: add support for Richland APUs
    - LP: #1164714
  * drm/radeon: add Richland pci ids
    - LP: #1164714
  * ALSA: hda/cirrus - Fix the digital beep registration
    - LP: #1164714
  * USB: xhci - fix bit definitions for IMAN register
    - LP: #1164714
  * x86-64: Fix the failure case in copy_user_handle_tail()
    - LP: #1164714
  * target/iscsi: Fix mutual CHAP auth on big-endian arches
    - LP: #1164714
  * target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/Os
    - LP: #1164714
  * ALSA: snd-usb: mixer: propagate errors up the call chain
    - LP: #1164714
  * ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()
    - LP: #1164714
  * ext4: fix data=journal fast mount/umount hang
    - LP: #1164714
  * ALSA: hda - Fix typo in checking IEC958 emphasis bit
    - LP: #1164714
  * usb: gadget: udc-core: fix a regression during gadget driver unbinding
    - LP: #1164714
  * usb: gadget: ffs: fix enable multiple instances
    - LP: #1164714
  * dm thin: fix discard corruption
    - LP: #1164714
  * dm verity: avoid deadlock
    - LP: #1164714
  * drm/mgag200: Bug fix: Modified pll algorithm for EH project
    - LP: #1164714
  * cifs: ignore everything in SPNEGO blob after mechTypes
    - LP: #1164714
  * USB: cdc-acm: fix device unregistration
    - LP: #1164714
  * USB: garmin_gps: fix memory leak on disconnect
    - LP: #1164714
  * USB: io_ti: fix get_icount for two port adapters
    - LP: #1164714
  * USB: serial: fix interface refcounting
    - LP: #1164714
  * i2c: tegra: check the clk_prepare_enable() return value
    - LP: #1164714
  * mm/hugetlb: fix total hugetlbfs pages count when using memory
    overcommit accouting
    - LP: #1164714
  * drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR
    - LP: #1164714
  * KMS: fix EDID detailed timing vsync parsing
    - LP: #1164714
  * KMS: fix EDID detailed timing frame rate
    - LP: #1164714
  * tg3: 5715 does not link up when autoneg off
    - LP: #1164714
  * sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline
    option
    - LP: #1164714
  * sfc: Disable VF queues during register self-test
    - LP: #1164714
  * sfc: Really disable flow control while flushing
    - LP: #1164714
  * sfc: Convert firmware subtypes to native byte order in
    efx_mcdi_get_board_cfg()
    - LP: #1164714
  * sfc: Add parentheses around use of bitfield macro arguments
    - LP: #1164714
  * sfc: Fix MCDI structure field lookup
    - LP: #1164714
  * sfc: Avoid generating over-length MC_CMD_FLUSH_RX_QUEUES request
    - LP: #1164714
  * sfc: Work-around flush timeout when flushes have completed
    - LP: #1164714
  * sfc: lock TX queues when calling netif_device_detach()
    - LP: #1164714
  * sfc: Correctly initialise reset_method in siena_test_chip()
    - LP: #1164714
  * sfc: Fix timekeeping in efx_mcdi_poll()
    - LP: #1164714
  * sfc: Properly sync RX DMA buffer when it is not the last in the page
    - LP: #1164714
  * sfc: Fix efx_rx_buf_offset() in the presence of swiotlb
    - LP: #1164714
  * sfc: Correct efx_rx_buffer::page_offset when EFX_PAGE_IP_ALIGN != 0
    - LP: #1164714
  * sfc: Detach net device when stopping queues for reconfiguration
    - LP: #1164714
  * sfc: Only use TX push if a single descriptor is to be written
    - LP: #1164714
  * sfc: Disable soft interrupt handling during efx_device_detach_sync()
    - LP: #1164714
  * sctp: don't break the loop while meeting the active_path so as to find
    the matched transport
    - LP: #1164714
  * netconsole: don't call __netpoll_cleanup() while atomic
    - LP: #1164714
  * net/ipv4: Ensure that location of timestamp option is stored
    - LP: #1164714
  * bonding: don't call update_speed_duplex() under spinlocks
    - LP: #1164714
  * sctp: Use correct sideffect command in duplicate cookie handling
    - LP: #1164714
  * ipv4: fix definition of FIB_TABLE_HASHSZ
    - LP: #1164714
  * rtnetlink: Mask the rta_type when range checking
    - LP: #1164714
  * tcp: fix skb_availroom()
    - LP: #1164714
  * inet: limit length of fragment queue hash table bucket lists
    - LP: #1164714
  * bnx2x: fix occasional statistics off-by-4GB error
    - LP: #1164714
  * signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear
    sa_restorer
    - LP: #1164714
  * kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER
    - LP: #1164714
  * vfs,proc: guarantee unique inodes in /proc
    - LP: #1164714
  * Linux 3.5.7.9
    - LP: #1164714
  * KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME
    (CVE-2013-1796)
    - LP: #1158254
    - CVE-2013-1796
  * KVM: Fix bounds checking in ioapic indirect register reads
    (CVE-2013-1798)
    - LP: #1158262
    - CVE-2013-1798
  * KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions
    (CVE-2013-1797)
    - LP: #1158258
    - CVE-2013-1797
  * drm/i915: "Flush Me Harder" required on gen6+
    - LP: #1140716
  * drm/i915: PIPE_CONTROL_TLB_INVALIDATE
    - LP: #1140716
  * drm/i915: Apply post-sync write for pipe control invalidates
    - LP: #1140716
  * drm/i915: TLB invalidation with MI_FLUSH_DW requires a post-sync op v3
    - LP: #1140716
  * drm/i915: PIPE_CONTROL TLB invalidate requires CS stall
    - LP: #1140716
 -- Brad Figg <email address hidden>   Tue, 23 Apr 2013 14:01:06 -0700

Upload details

Uploaded by:
Brad Figg on 2013-04-23
Uploaded to:
Quantal
Original maintainer:
Ubuntu Kernel Team
Component:
main
Architectures:
all i386 amd64 powerpc ppc64 armel armhf
Section:
devel
Urgency:
Low Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size MD5 Checksum
linux_3.5.0.orig.tar.gz 97.5 MiB 83dbbf2c25e61d3b5b8aaf7101dafd92
linux_3.5.0-28.48.diff.gz 4.0 MiB ffe08599b357ccccfa83c0e055da2532
linux_3.5.0-28.48.dsc 7.8 KiB ff204b65aed7d269b67a3e0ff4fbfa14

Binary packages built by this source

block-modules-3.5.0-28-generic-di: Block storage devices

 This package contains the block storage devices, including DAC960 and
 paraide.

block-modules-3.5.0-28-highbank-di: Block storage devices

 This package contains the block storage devices, including DAC960 and
 paraide.

block-modules-3.5.0-28-omap-di: Block storage devices

 This package contains the block storage devices, including DAC960 and
 paraide.

block-modules-3.5.0-28-powerpc-smp-di: Block storage devices

 This package contains the block storage devices, including DAC960 and
 paraide.

block-modules-3.5.0-28-powerpc64-smp-di: Block storage devices

 This package contains the block storage devices, including DAC960 and
 paraide.

crypto-modules-3.5.0-28-generic-di: crypto modules

 This package contains crypto modules.

crypto-modules-3.5.0-28-highbank-di: crypto modules

 This package contains crypto modules.

crypto-modules-3.5.0-28-omap-di: crypto modules

 This package contains crypto modules.

crypto-modules-3.5.0-28-powerpc-smp-di: crypto modules

 This package contains crypto modules.

crypto-modules-3.5.0-28-powerpc64-smp-di: crypto modules

 This package contains crypto modules.

fat-modules-3.5.0-28-generic-di: FAT filesystem support

 This includes Windows FAT and VFAT support.

fat-modules-3.5.0-28-highbank-di: FAT filesystem support

 This includes Windows FAT and VFAT support.

fat-modules-3.5.0-28-omap-di: FAT filesystem support

 This includes Windows FAT and VFAT support.

fat-modules-3.5.0-28-powerpc-smp-di: FAT filesystem support

 This includes Windows FAT and VFAT support.

fat-modules-3.5.0-28-powerpc64-smp-di: FAT filesystem support

 This includes Windows FAT and VFAT support.

fb-modules-3.5.0-28-generic-di: Framebuffer modules
firewire-core-modules-3.5.0-28-generic-di: Firewire (IEEE-1394) Support
firewire-core-modules-3.5.0-28-powerpc-smp-di: Firewire (IEEE-1394) Support
firewire-core-modules-3.5.0-28-powerpc64-smp-di: Firewire (IEEE-1394) Support
floppy-modules-3.5.0-28-generic-di: Floppy driver support
floppy-modules-3.5.0-28-powerpc-smp-di: Floppy driver support
floppy-modules-3.5.0-28-powerpc64-smp-di: Floppy driver support
fs-core-modules-3.5.0-28-generic-di: Base filesystem modules

 This includes jfs, reiserfs and xfs.

fs-core-modules-3.5.0-28-highbank-di: Base filesystem modules

 This includes jfs, reiserfs and xfs.

fs-core-modules-3.5.0-28-omap-di: Base filesystem modules

 This includes jfs, reiserfs and xfs.

fs-core-modules-3.5.0-28-powerpc-smp-di: Base filesystem modules

 This includes jfs, reiserfs and xfs.

fs-core-modules-3.5.0-28-powerpc64-smp-di: Base filesystem modules

 This includes jfs, reiserfs and xfs.

fs-secondary-modules-3.5.0-28-generic-di: Extra filesystem modules

 This includes support for Windows NTFS and MacOS HFS/HFSPlus

fs-secondary-modules-3.5.0-28-highbank-di: Extra filesystem modules

 This includes support for Windows NTFS and MacOS HFS/HFSPlus

fs-secondary-modules-3.5.0-28-omap-di: Extra filesystem modules

 This includes support for Windows NTFS and MacOS HFS/HFSPlus

fs-secondary-modules-3.5.0-28-powerpc-smp-di: Extra filesystem modules

 This includes support for Windows NTFS and MacOS HFS/HFSPlus

fs-secondary-modules-3.5.0-28-powerpc64-smp-di: Extra filesystem modules

 This includes support for Windows NTFS and MacOS HFS/HFSPlus

input-modules-3.5.0-28-generic-di: Support for various input methods
input-modules-3.5.0-28-highbank-di: Support for various input methods
input-modules-3.5.0-28-omap-di: Support for various input methods
input-modules-3.5.0-28-powerpc-smp-di: Support for various input methods
input-modules-3.5.0-28-powerpc64-smp-di: Support for various input methods
ipmi-modules-3.5.0-28-generic-di: ipmi modules
ipmi-modules-3.5.0-28-omap-di: ipmi modules
ipmi-modules-3.5.0-28-powerpc-smp-di: ipmi modules
ipmi-modules-3.5.0-28-powerpc64-smp-di: ipmi modules
irda-modules-3.5.0-28-generic-di: Support for Infrared protocols
irda-modules-3.5.0-28-highbank-di: Support for Infrared protocols
irda-modules-3.5.0-28-omap-di: Support for Infrared protocols
irda-modules-3.5.0-28-powerpc-smp-di: Support for Infrared protocols
irda-modules-3.5.0-28-powerpc64-smp-di: Support for Infrared protocols
kernel-image-3.5.0-28-generic-di: Linux kernel binary image for the Debian installer

 This package contains the kernel image for the Debian installer
 boot images. It does _not_ provide a usable kernel for your full
 Debian system.

kernel-image-3.5.0-28-highbank-di: Linux kernel binary image for the Debian installer

 This package contains the kernel image for the Debian installer
 boot images. It does _not_ provide a usable kernel for your full
 Debian system.

kernel-image-3.5.0-28-omap-di: Linux kernel binary image for the Debian installer

 This package contains the kernel image for the Debian installer
 boot images. It does _not_ provide a usable kernel for your full
 Debian system.

kernel-image-3.5.0-28-powerpc-smp-di: Linux kernel binary image for the Debian installer

 This package contains the kernel image for the Debian installer
 boot images. It does _not_ provide a usable kernel for your full
 Debian system.

kernel-image-3.5.0-28-powerpc64-smp-di: Linux kernel binary image for the Debian installer

 This package contains the kernel image for the Debian installer
 boot images. It does _not_ provide a usable kernel for your full
 Debian system.

linux-doc: Linux kernel specific documentation for version 3.5.0

 This package provides the various documents in the 3.5.0 kernel
 Documentation/ subdirectory. These document kernel subsystems, APIs, device
 drivers, and so on. See
 /usr/share/doc/linux-doc/00-INDEX for a list of what is
 contained in each file.

linux-headers-3.5.0-28: Header files related to Linux kernel version 3.5.0

 This package provides kernel header files for version 3.5.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-3.5.0-28/debian.README.gz for details

linux-headers-3.5.0-28-generic: Linux kernel headers for version 3.5.0 on 32 bit x86 SMP

 This package provides kernel header files for version 3.5.0 on
 32 bit x86 SMP.
 .
 This is for sites that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-3.5.0-28/debian.README.gz for details.

linux-headers-3.5.0-28-highbank: Linux kernel headers for version 3.5.0 on Calxeda highbank ARM Server

 This package provides kernel header files for version 3.5.0 on
 Calxeda highbank ARM Server.
 .
 This is for sites that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-3.5.0-28/debian.README.gz for details.

linux-headers-3.5.0-28-omap: Linux kernel headers for version 3.5.0 on TI OMAP3-based ARM (hard float) systems

 This package provides kernel header files for version 3.5.0 on
 TI OMAP3-based ARM (hard float) systems.
 .
 This is for sites that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-3.5.0-28/debian.README.gz for details.

linux-headers-3.5.0-28-powerpc-smp: Linux kernel headers for version 3.5.0 on 32-bit PowerPC SMP

 This package provides kernel header files for version 3.5.0 on
 32-bit PowerPC SMP.
 .
 This is for sites that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-3.5.0-28/debian.README.gz for details.

linux-headers-3.5.0-28-powerpc64-smp: Linux kernel headers for version 3.5.0 on 64-bit PowerPC SMP

 This package provides kernel header files for version 3.5.0 on
 64-bit PowerPC SMP.
 .
 This is for sites that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-3.5.0-28/debian.README.gz for details.

linux-image-3.5.0-28-generic: Linux kernel image for version 3.5.0 on 32 bit x86 SMP

 This package contains the Linux kernel image for version 3.5.0 on
 32 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

linux-image-3.5.0-28-highbank: Linux kernel image for version 3.5.0 on Calxeda highbank ARM Server

 This package contains the Linux kernel image for version 3.5.0 on
 Calxeda highbank ARM Server.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Calxeda highbank processors.
 .
 Targeted towards Calxeda highbank ARM Server
 .
 You likely do not want to install this package directly. Instead, install
 the linux-highbank meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

linux-image-3.5.0-28-omap: Linux kernel image for version 3.5.0 on TI OMAP3-based ARM (hard float) systems

 This package contains the Linux kernel image for version 3.5.0 on
 TI OMAP3-based ARM (hard float) systems.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports TI OMAP3 processors.
 .
 Targeted towards boards such as Beagleboard, Gumstix, IGEPv2, etc.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-omap meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

linux-image-3.5.0-28-powerpc-smp: Linux kernel image for version 3.5.0 on 32-bit PowerPC SMP

 This package contains the Linux kernel image for version 3.5.0 on
 32-bit PowerPC SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports 32-bit PowerPC SMP processors.
 .
 Geared toward desktop or server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-powerpc-smp meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

linux-image-3.5.0-28-powerpc64-smp: Linux kernel image for version 3.5.0 on 64-bit PowerPC SMP

 This package contains the Linux kernel image for version 3.5.0 on
 64-bit PowerPC SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports 64-bit PowerPC SMP processors.
 .
 Geared toward desktop or server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-powerpc64-smp meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

linux-image-extra-3.5.0-28-generic: Linux kernel image for version 3.5.0 on 32 bit x86 SMP

 This package contains the Linux kernel image for version 3.5.0 on
 32 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

linux-libc-dev: Linux Kernel Headers for development

 This package provides headers from the Linux kernel. These headers
 are used by the installed headers for GNU glibc and other system
 libraries. They are NOT meant to be used to build third-party modules for
 your kernel. Use linux-headers-* packages for that.

linux-source-3.5.0: Linux kernel source for version 3.5.0 with Ubuntu patches

 This package provides the source code for the Linux kernel version
 3.5.0.
 .
 This package is mainly meant for other packages to use, in order to build
 custom flavours.
 .
 If you wish to use this package to create a custom Linux kernel, then it
 is suggested that you investigate the package kernel-package, which has
 been designed to ease the task of creating kernel image packages.
 .
 If you are simply trying to build third-party modules for your kernel,
 you do not want this package. Install the appropriate linux-headers
 package instead.

linux-tools-3.5.0-28: Linux kernel version specific tools for version 3.5.0-28

 This package provides the architecture dependant parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version 3.5.0-28 on
 ARM (hard float).

linux-tools-common: Linux kernel version specific tools for version 3.5.0

 This package provides the architecture independent parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version 3.5.0.

md-modules-3.5.0-28-generic-di: Multi-device support (raid, device-mapper, lvm)
md-modules-3.5.0-28-highbank-di: Multi-device support (raid, device-mapper, lvm)
md-modules-3.5.0-28-omap-di: Multi-device support (raid, device-mapper, lvm)
md-modules-3.5.0-28-powerpc-smp-di: Multi-device support (raid, device-mapper, lvm)
md-modules-3.5.0-28-powerpc64-smp-di: Multi-device support (raid, device-mapper, lvm)
message-modules-3.5.0-28-generic-di: Fusion and i2o storage modules

 This package containes the fusion and i2o storage modules.

message-modules-3.5.0-28-powerpc-smp-di: Fusion and i2o storage modules

 This package containes the fusion and i2o storage modules.

message-modules-3.5.0-28-powerpc64-smp-di: Fusion and i2o storage modules

 This package containes the fusion and i2o storage modules.

mouse-modules-3.5.0-28-generic-di: Mouse support

 This package contains mouse drivers for the Linux kernel.

mouse-modules-3.5.0-28-highbank-di: Mouse support

 This package contains mouse drivers for the Linux kernel.

mouse-modules-3.5.0-28-omap-di: Mouse support

 This package contains mouse drivers for the Linux kernel.

mouse-modules-3.5.0-28-powerpc-smp-di: Mouse support

 This package contains mouse drivers for the Linux kernel.

mouse-modules-3.5.0-28-powerpc64-smp-di: Mouse support

 This package contains mouse drivers for the Linux kernel.

multipath-modules-3.5.0-28-generic-di: DM-Multipath support

  This package contains modules for device-mapper multipath support.

multipath-modules-3.5.0-28-omap-di: DM-Multipath support

  This package contains modules for device-mapper multipath support.

multipath-modules-3.5.0-28-powerpc-smp-di: DM-Multipath support

  This package contains modules for device-mapper multipath support.

multipath-modules-3.5.0-28-powerpc64-smp-di: DM-Multipath support

  This package contains modules for device-mapper multipath support.

nfs-modules-3.5.0-28-generic-di: NFS filesystem drivers

 Includes the NFS client driver, and supporting modules.

nfs-modules-3.5.0-28-highbank-di: NFS filesystem drivers

 Includes the NFS client driver, and supporting modules.

nfs-modules-3.5.0-28-omap-di: NFS filesystem drivers

 Includes the NFS client driver, and supporting modules.

nfs-modules-3.5.0-28-powerpc-smp-di: NFS filesystem drivers

 Includes the NFS client driver, and supporting modules.

nfs-modules-3.5.0-28-powerpc64-smp-di: NFS filesystem drivers

 Includes the NFS client driver, and supporting modules.

nic-modules-3.5.0-28-generic-di: Network interface support
nic-modules-3.5.0-28-highbank-di: Network interface support
nic-modules-3.5.0-28-omap-di: Network interface support
nic-modules-3.5.0-28-powerpc-smp-di: Network interface support
nic-modules-3.5.0-28-powerpc64-smp-di: Network interface support
nic-pcmcia-modules-3.5.0-28-generic-di: PCMCIA network interface support
nic-pcmcia-modules-3.5.0-28-powerpc-smp-di: PCMCIA network interface support
nic-pcmcia-modules-3.5.0-28-powerpc64-smp-di: PCMCIA network interface support
nic-shared-modules-3.5.0-28-generic-di: nic shared modules

  This package contains modules which support nic modules

nic-shared-modules-3.5.0-28-highbank-di: nic shared modules

  This package contains modules which support nic modules

nic-shared-modules-3.5.0-28-omap-di: nic shared modules

  This package contains modules which support nic modules

nic-shared-modules-3.5.0-28-powerpc-smp-di: nic shared modules

  This package contains modules which support nic modules

nic-shared-modules-3.5.0-28-powerpc64-smp-di: nic shared modules

  This package contains modules which support nic modules

nic-usb-modules-3.5.0-28-generic-di: USB network interface support
nic-usb-modules-3.5.0-28-highbank-di: USB network interface support
nic-usb-modules-3.5.0-28-omap-di: USB network interface support
nic-usb-modules-3.5.0-28-powerpc-smp-di: USB network interface support
nic-usb-modules-3.5.0-28-powerpc64-smp-di: USB network interface support
parport-modules-3.5.0-28-generic-di: Parallel port support
parport-modules-3.5.0-28-highbank-di: Parallel port support
parport-modules-3.5.0-28-omap-di: Parallel port support
parport-modules-3.5.0-28-powerpc-smp-di: Parallel port support
parport-modules-3.5.0-28-powerpc64-smp-di: Parallel port support
pata-modules-3.5.0-28-generic-di: PATA support modules
pata-modules-3.5.0-28-powerpc-smp-di: PATA support modules
pata-modules-3.5.0-28-powerpc64-smp-di: PATA support modules
pcmcia-modules-3.5.0-28-generic-di: PCMCIA Modules
pcmcia-modules-3.5.0-28-powerpc-smp-di: PCMCIA Modules
pcmcia-modules-3.5.0-28-powerpc64-smp-di: PCMCIA Modules
pcmcia-storage-modules-3.5.0-28-generic-di: PCMCIA storage support
pcmcia-storage-modules-3.5.0-28-powerpc-smp-di: PCMCIA storage support
pcmcia-storage-modules-3.5.0-28-powerpc64-smp-di: PCMCIA storage support
plip-modules-3.5.0-28-generic-di: PLIP (parallel port) networking support
plip-modules-3.5.0-28-highbank-di: PLIP (parallel port) networking support
plip-modules-3.5.0-28-omap-di: PLIP (parallel port) networking support
plip-modules-3.5.0-28-powerpc-smp-di: PLIP (parallel port) networking support
plip-modules-3.5.0-28-powerpc64-smp-di: PLIP (parallel port) networking support
ppp-modules-3.5.0-28-generic-di: PPP (serial port) networking support
ppp-modules-3.5.0-28-highbank-di: PPP (serial port) networking support
ppp-modules-3.5.0-28-omap-di: PPP (serial port) networking support
ppp-modules-3.5.0-28-powerpc-smp-di: PPP (serial port) networking support
ppp-modules-3.5.0-28-powerpc64-smp-di: PPP (serial port) networking support
sata-modules-3.5.0-28-generic-di: SATA storage support
sata-modules-3.5.0-28-omap-di: SATA storage support
sata-modules-3.5.0-28-powerpc-smp-di: SATA storage support
sata-modules-3.5.0-28-powerpc64-smp-di: SATA storage support
scsi-modules-3.5.0-28-generic-di: SCSI storage support
scsi-modules-3.5.0-28-highbank-di: SCSI storage support
scsi-modules-3.5.0-28-omap-di: SCSI storage support
scsi-modules-3.5.0-28-powerpc-smp-di: SCSI storage support
scsi-modules-3.5.0-28-powerpc64-smp-di: SCSI storage support
serial-modules-3.5.0-28-generic-di: Serial port support
serial-modules-3.5.0-28-powerpc-smp-di: Serial port support
serial-modules-3.5.0-28-powerpc64-smp-di: Serial port support
speakup-modules-3.5.0-28-generic-di: speakup modules

 This package contains speakup modules.

speakup-modules-3.5.0-28-highbank-di: speakup modules

 This package contains speakup modules.

speakup-modules-3.5.0-28-omap-di: speakup modules

 This package contains speakup modules.

speakup-modules-3.5.0-28-powerpc-smp-di: speakup modules

 This package contains speakup modules.

speakup-modules-3.5.0-28-powerpc64-smp-di: speakup modules

 This package contains speakup modules.

squashfs-modules-3.5.0-28-generic-di: squashfs modules

 This package contains squashfs modules.

squashfs-modules-3.5.0-28-highbank-di: squashfs modules

 This package contains squashfs modules.

squashfs-modules-3.5.0-28-omap-di: squashfs modules

 This package contains squashfs modules.

squashfs-modules-3.5.0-28-powerpc-smp-di: squashfs modules

 This package contains squashfs modules.

squashfs-modules-3.5.0-28-powerpc64-smp-di: squashfs modules

 This package contains squashfs modules.

storage-core-modules-3.5.0-28-generic-di: Core storage support

 Includes core SCSI, LibATA, USB-Storage. Also includes related block
 devices for CD, Disk and Tape medium (and IDE Floppy).

storage-core-modules-3.5.0-28-highbank-di: Core storage support

 Includes core SCSI, LibATA, USB-Storage. Also includes related block
 devices for CD, Disk and Tape medium (and IDE Floppy).

storage-core-modules-3.5.0-28-omap-di: Core storage support

 Includes core SCSI, LibATA, USB-Storage. Also includes related block
 devices for CD, Disk and Tape medium (and IDE Floppy).

storage-core-modules-3.5.0-28-powerpc-smp-di: Core storage support

 Includes core SCSI, LibATA, USB-Storage. Also includes related block
 devices for CD, Disk and Tape medium (and IDE Floppy).

storage-core-modules-3.5.0-28-powerpc64-smp-di: Core storage support

 Includes core SCSI, LibATA, USB-Storage. Also includes related block
 devices for CD, Disk and Tape medium (and IDE Floppy).

usb-modules-3.5.0-28-generic-di: Core USB support
usb-modules-3.5.0-28-highbank-di: Core USB support
usb-modules-3.5.0-28-omap-di: Core USB support
usb-modules-3.5.0-28-powerpc-smp-di: Core USB support
usb-modules-3.5.0-28-powerpc64-smp-di: Core USB support
virtio-modules-3.5.0-28-generic-di: VirtIO Modules

 Includes modules for VirtIO (virtual machine, generally kvm guests)

vlan-modules-3.5.0-28-generic-di: vlan modules

 This package contains vlan (8021.Q) modules.

vlan-modules-3.5.0-28-highbank-di: vlan modules

 This package contains vlan (8021.Q) modules.

vlan-modules-3.5.0-28-omap-di: vlan modules

 This package contains vlan (8021.Q) modules.

vlan-modules-3.5.0-28-powerpc-smp-di: vlan modules

 This package contains vlan (8021.Q) modules.

vlan-modules-3.5.0-28-powerpc64-smp-di: vlan modules

 This package contains vlan (8021.Q) modules.