RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', 'c7fd87cbec7e413ff9a2f2784d130bd7b549ad19', '/home/buildd/filecache-default/0ece8653dc8cc619c0a0d1f8659694af0eeda76f'] Synching the system clock with the buildd NTP service... 15 May 22:15:06 ntpdate[11768]: adjust time server 10.211.37.1 offset -0.000009 sec Unpacking chroot for build c7fd87cbec7e413ff9a2f2784d130bd7b549ad19 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', 'c7fd87cbec7e413ff9a2f2784d130bd7b549ad19'] Mounting chroot for build c7fd87cbec7e413ff9a2f2784d130bd7b549ad19 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', 'c7fd87cbec7e413ff9a2f2784d130bd7b549ad19', 'universe'] Attempting OGRE for universe in build-c7fd87cbec7e413ff9a2f2784d130bd7b549ad19 No OGRE sources.list found. RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', 'c7fd87cbec7e413ff9a2f2784d130bd7b549ad19', 'deb http://ftpmaster.internal/ubuntu maverick main universe'] Overriding sources.list in build-c7fd87cbec7e413ff9a2f2784d130bd7b549ad19 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', 'c7fd87cbec7e413ff9a2f2784d130bd7b549ad19'] Updating debian chroot for build c7fd87cbec7e413ff9a2f2784d130bd7b549ad19 Get:1 http://ftpmaster.internal maverick Release.gpg [189B] Get:2 http://ftpmaster.internal maverick Release [57.3kB] Get:3 http://ftpmaster.internal maverick/main Packages [1379kB] Get:4 http://ftpmaster.internal maverick/universe Packages [5362kB] Fetched 6799kB in 9s (716kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: gcc-4.5-base The following packages will be upgraded: apt apt-transport-https base-files binutils build-essential cpp-4.4 debianutils diffutils g++-4.4 gcc-4.4 gcc-4.4-base gcc-4.4-multilib grep insserv klibc-utils lib64gcc1 lib64gomp1 libc-bin libc-dev-bin libc6 libc6-dev libc6-dev-sparc64 libc6-sparc64 libgcc1 libgnutls26 libgomp1 libidn11 libkeyutils1 libklibc libnih-dbus1 libnih1 libpam-modules libpam-runtime libpam0g libpcre3 libreadline6 libselinux1 libstdc++6 libstdc++6-4.4-dev libtasn1-3 linux-libc-dev manpages manpages-dev mountall perl perl-base perl-modules pkg-create-dbgsym readline-common sed tar tzdata 52 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 45.2MB of archives. After this operation, 2834kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libpam-modules base-files debianutils diffutils grep perl-modules libc-dev-bin libc6-dev libc6-dev-sparc64 libc6-sparc64 libc-bin libc6 linux-libc-dev gcc-4.5-base libgcc1 tzdata perl perl-base sed tar libstdc++6 apt libpam-runtime libpam0g libselinux1 libtasn1-3 libgnutls26 libidn11 libkeyutils1 readline-common libreadline6 lib64gcc1 libgomp1 lib64gomp1 gcc-4.4-multilib libstdc++6-4.4-dev g++-4.4 gcc-4.4 cpp-4.4 binutils gcc-4.4-base insserv klibc-utils libklibc libnih-dbus1 libnih1 libpcre3 mountall apt-transport-https manpages build-essential manpages-dev pkg-create-dbgsym Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ maverick/main libpam-modules 1.1.1-3ubuntu2 [375kB] Get:2 http://ftpmaster.internal/ubuntu/ maverick/main base-files 5.0.0ubuntu21 [69.8kB] Get:3 http://ftpmaster.internal/ubuntu/ maverick/main debianutils 3.2.3 [49.6kB] Get:4 http://ftpmaster.internal/ubuntu/ maverick/main diffutils 1:3.0-1 [149kB] Get:5 http://ftpmaster.internal/ubuntu/ maverick/main grep 2.6.3-3 [227kB] Get:6 http://ftpmaster.internal/ubuntu/ maverick/main perl-modules 5.10.1-12ubuntu1 [3480kB] Get:7 http://ftpmaster.internal/ubuntu/ maverick/main libc-dev-bin 2.11.1-0ubuntu8 [218kB] Get:8 http://ftpmaster.internal/ubuntu/ maverick/main libc6-dev 2.11.1-0ubuntu8 [2930kB] Get:9 http://ftpmaster.internal/ubuntu/ maverick/main libc6-dev-sparc64 2.11.1-0ubuntu8 [2631kB] Get:10 http://ftpmaster.internal/ubuntu/ maverick/main libc6-sparc64 2.11.1-0ubuntu8 [4335kB] Get:11 http://ftpmaster.internal/ubuntu/ maverick/main libc-bin 2.11.1-0ubuntu8 [748kB] Get:12 http://ftpmaster.internal/ubuntu/ maverick/main libc6 2.11.1-0ubuntu8 [4367kB] Get:13 http://ftpmaster.internal/ubuntu/ maverick/main linux-libc-dev 2.6.34-2.9 [774kB] Get:14 http://ftpmaster.internal/ubuntu/ maverick/main gcc-4.5-base 4.5.0-2ubuntu3 [116kB] Get:15 http://ftpmaster.internal/ubuntu/ maverick/main libgcc1 1:4.5.0-2ubuntu3 [30.3kB] Get:16 http://ftpmaster.internal/ubuntu/ maverick/main tzdata 2010j-1 [682kB] Get:17 http://ftpmaster.internal/ubuntu/ maverick/main perl 5.10.1-12ubuntu1 [4015kB] Get:18 http://ftpmaster.internal/ubuntu/ maverick/main perl-base 5.10.1-12ubuntu1 [955kB] Get:19 http://ftpmaster.internal/ubuntu/ maverick/main sed 4.2.1-7 [178kB] Get:20 http://ftpmaster.internal/ubuntu/ maverick/main tar 1.23-1 [408kB] Get:21 http://ftpmaster.internal/ubuntu/ maverick/main libstdc++6 4.5.0-2ubuntu3 [332kB] Get:22 http://ftpmaster.internal/ubuntu/ maverick/main apt 0.7.25.3ubuntu8 [1810kB] Get:23 http://ftpmaster.internal/ubuntu/ maverick/main libpam-runtime 1.1.1-3ubuntu2 [115kB] Get:24 http://ftpmaster.internal/ubuntu/ maverick/main libpam0g 1.1.1-3ubuntu2 [122kB] Get:25 http://ftpmaster.internal/ubuntu/ maverick/main libselinux1 2.0.94-1 [84.8kB] Get:26 http://ftpmaster.internal/ubuntu/ maverick/main libtasn1-3 2.6-1 [45.3kB] Get:27 http://ftpmaster.internal/ubuntu/ maverick/main libgnutls26 2.8.6-1 [369kB] Get:28 http://ftpmaster.internal/ubuntu/ maverick/main libidn11 1.18-1 [168kB] Get:29 http://ftpmaster.internal/ubuntu/ maverick/main libkeyutils1 1.4-1 [6476B] Get:30 http://ftpmaster.internal/ubuntu/ maverick/main readline-common 6.1-2 [54.0kB] Get:31 http://ftpmaster.internal/ubuntu/ maverick/main libreadline6 6.1-2 [148kB] Get:32 http://ftpmaster.internal/ubuntu/ maverick/main lib64gcc1 1:4.5.0-2ubuntu3 [34.2kB] Get:33 http://ftpmaster.internal/ubuntu/ maverick/main libgomp1 4.5.0-2ubuntu3 [21.8kB] Get:34 http://ftpmaster.internal/ubuntu/ maverick/main lib64gomp1 4.5.0-2ubuntu3 [21.0kB] Get:35 http://ftpmaster.internal/ubuntu/ maverick/main gcc-4.4-multilib 4.4.4-1ubuntu2 [76.9kB] Get:36 http://ftpmaster.internal/ubuntu/ maverick/main libstdc++6-4.4-dev 4.4.4-1ubuntu2 [1532kB] Get:37 http://ftpmaster.internal/ubuntu/ maverick/main g++-4.4 4.4.4-1ubuntu2 [4262kB] Get:38 http://ftpmaster.internal/ubuntu/ maverick/main gcc-4.4 4.4.4-1ubuntu2 [686kB] Get:39 http://ftpmaster.internal/ubuntu/ maverick/main cpp-4.4 4.4.4-1ubuntu2 [3109kB] Get:40 http://ftpmaster.internal/ubuntu/ maverick/main binutils 2.20.1-9ubuntu1 [2179kB] Get:41 http://ftpmaster.internal/ubuntu/ maverick/main gcc-4.4-base 4.4.4-1ubuntu2 [119kB] Get:42 http://ftpmaster.internal/ubuntu/ maverick/main insserv 1.14.0-2 [74.2kB] Get:43 http://ftpmaster.internal/ubuntu/ maverick/main klibc-utils 1.5.18-1 [187kB] Get:44 http://ftpmaster.internal/ubuntu/ maverick/main libklibc 1.5.18-1 [57.2kB] Get:45 http://ftpmaster.internal/ubuntu/ maverick/main libnih-dbus1 1.0.2-1 [14.5kB] Get:46 http://ftpmaster.internal/ubuntu/ maverick/main libnih1 1.0.2-1 [131kB] Get:47 http://ftpmaster.internal/ubuntu/ maverick/main libpcre3 8.02-1 [238kB] Get:48 http://ftpmaster.internal/ubuntu/ maverick/main mountall 2.15 [56.0kB] Get:49 http://ftpmaster.internal/ubuntu/ maverick/main apt-transport-https 0.7.25.3ubuntu8 [80.7kB] Get:50 http://ftpmaster.internal/ubuntu/ maverick/main manpages 3.24-1 [722kB] Get:51 http://ftpmaster.internal/ubuntu/ maverick/main build-essential 11.5 [7234B] Get:52 http://ftpmaster.internal/ubuntu/ maverick/main manpages-dev 3.24-1 [1567kB] Get:53 http://ftpmaster.internal/ubuntu/ maverick/main pkg-create-dbgsym 0.43 [13.1kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 45.2MB in 2s (16.2MB/s) (Reading database ... 13677 files and directories currently installed.) Preparing to replace libpam-modules 1.1.1-2ubuntu2 (using .../libpam-modules_1.1.1-3ubuntu2_sparc.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.1-3ubuntu2) ... (Reading database ... 13678 files and directories currently installed.) Preparing to replace base-files 5.0.0ubuntu20 (using .../base-files_5.0.0ubuntu21_sparc.deb) ... Unpacking replacement base-files ... Setting up base-files (5.0.0ubuntu21) ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Installing new version of config file /etc/lsb-release ... (Reading database ... 13678 files and directories currently installed.) Preparing to replace debianutils 3.2.2 (using .../debianutils_3.2.3_sparc.deb) ... Unpacking replacement debianutils ... Setting up debianutils (3.2.3) ... (Reading database ... 13678 files and directories currently installed.) Preparing to replace diffutils 1:2.8.1-18 (using .../diffutils_1%3a3.0-1_sparc.deb) ... Unpacking replacement diffutils ... Setting up diffutils (1:3.0-1) ... (Reading database ... 13678 files and directories currently installed.) Preparing to replace grep 2.5.4-4build1 (using .../grep_2.6.3-3_sparc.deb) ... Unpacking replacement grep ... Setting up grep (2.6.3-3) ... (Reading database ... 13678 files and directories currently installed.) Preparing to replace perl-modules 5.10.1-8ubuntu2 (using .../perl-modules_5.10.1-12ubuntu1_all.deb) ... Unpacking replacement perl-modules ... Preparing to replace libc-dev-bin 2.11.1-0ubuntu7 (using .../libc-dev-bin_2.11.1-0ubuntu8_sparc.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6-dev 2.11.1-0ubuntu7 (using .../libc6-dev_2.11.1-0ubuntu8_sparc.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc6-dev-sparc64 2.11.1-0ubuntu7 (using .../libc6-dev-sparc64_2.11.1-0ubuntu8_sparc.deb) ... Unpacking replacement libc6-dev-sparc64 ... Preparing to replace libc6-sparc64 2.11.1-0ubuntu7 (using .../libc6-sparc64_2.11.1-0ubuntu8_sparc.deb) ... Unpacking replacement libc6-sparc64 ... Preparing to replace libc-bin 2.11.1-0ubuntu7 (using .../libc-bin_2.11.1-0ubuntu8_sparc.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.11.1-0ubuntu8) ... (Reading database ... 13679 files and directories currently installed.) Preparing to replace libc6 2.11.1-0ubuntu7 (using .../libc6_2.11.1-0ubuntu8_sparc.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.11.1-0ubuntu8) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13679 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.32-21.32 (using .../linux-libc-dev_2.6.34-2.9_sparc.deb) ... Unpacking replacement linux-libc-dev ... Selecting previously deselected package gcc-4.5-base. Unpacking gcc-4.5-base (from .../gcc-4.5-base_4.5.0-2ubuntu3_sparc.deb) ... Setting up gcc-4.5-base (4.5.0-2ubuntu3) ... (Reading database ... 13689 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.3-4ubuntu5 (using .../libgcc1_1%3a4.5.0-2ubuntu3_sparc.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.5.0-2ubuntu3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13689 files and directories currently installed.) Preparing to replace tzdata 2010i-1 (using .../tzdata_2010j-1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2010j-1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat May 15 21:16:44 UTC 2010. Universal Time is now: Sat May 15 21:16:44 UTC 2010. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... 13692 files and directories currently installed.) Preparing to replace perl 5.10.1-8ubuntu2 (using .../perl_5.10.1-12ubuntu1_sparc.deb) ... Unpacking replacement perl ... Replacing files in old package perl-base ... Preparing to replace perl-base 5.10.1-8ubuntu2 (using .../perl-base_5.10.1-12ubuntu1_sparc.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-12ubuntu1) ... (Reading database ... 13692 files and directories currently installed.) Preparing to replace sed 4.2.1-6 (using .../archives/sed_4.2.1-7_sparc.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-7) ... (Reading database ... 13692 files and directories currently installed.) Preparing to replace tar 1.22-2 (using .../archives/tar_1.23-1_sparc.deb) ... Unpacking replacement tar ... Setting up tar (1.23-1) ... (Reading database ... 13692 files and directories currently installed.) Preparing to replace libstdc++6 4.4.3-4ubuntu5 (using .../libstdc++6_4.5.0-2ubuntu3_sparc.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.5.0-2ubuntu3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13692 files and directories currently installed.) Preparing to replace apt 0.7.25.3ubuntu7 (using .../apt_0.7.25.3ubuntu8_sparc.deb) ... Unpacking replacement apt ... Setting up apt (0.7.25.3ubuntu8) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13692 files and directories currently installed.) Preparing to replace libpam-runtime 1.1.1-2ubuntu2 (using .../libpam-runtime_1.1.1-3ubuntu2_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.1-3ubuntu2) ... (Reading database ... 13692 files and directories currently installed.) Preparing to replace libpam0g 1.1.1-2ubuntu2 (using .../libpam0g_1.1.1-3ubuntu2_sparc.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.1-3ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13692 files and directories currently installed.) Preparing to replace libselinux1 2.0.89-4 (using .../libselinux1_2.0.94-1_sparc.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.0.94-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13692 files and directories currently installed.) Preparing to replace libtasn1-3 2.4-1 (using .../libtasn1-3_2.6-1_sparc.deb) ... Unpacking replacement libtasn1-3 ... Preparing to replace libgnutls26 2.8.5-2 (using .../libgnutls26_2.8.6-1_sparc.deb) ... Unpacking replacement libgnutls26 ... Preparing to replace libidn11 1.15-2 (using .../libidn11_1.18-1_sparc.deb) ... Unpacking replacement libidn11 ... Preparing to replace libkeyutils1 1.2-12 (using .../libkeyutils1_1.4-1_sparc.deb) ... Unpacking replacement libkeyutils1 ... Preparing to replace readline-common 6.1-1 (using .../readline-common_6.1-2_all.deb) ... Unpacking replacement readline-common ... Preparing to replace libreadline6 6.1-1 (using .../libreadline6_6.1-2_sparc.deb) ... Unpacking replacement libreadline6 ... Preparing to replace lib64gcc1 1:4.4.3-4ubuntu5 (using .../lib64gcc1_1%3a4.5.0-2ubuntu3_sparc.deb) ... Unpacking replacement lib64gcc1 ... Preparing to replace libgomp1 4.4.3-4ubuntu5 (using .../libgomp1_4.5.0-2ubuntu3_sparc.deb) ... Unpacking replacement libgomp1 ... Preparing to replace lib64gomp1 4.4.3-4ubuntu5 (using .../lib64gomp1_4.5.0-2ubuntu3_sparc.deb) ... Unpacking replacement lib64gomp1 ... Preparing to replace gcc-4.4-multilib 4.4.3-4ubuntu5 (using .../gcc-4.4-multilib_4.4.4-1ubuntu2_sparc.deb) ... Unpacking replacement gcc-4.4-multilib ... Preparing to replace libstdc++6-4.4-dev 4.4.3-4ubuntu5 (using .../libstdc++6-4.4-dev_4.4.4-1ubuntu2_sparc.deb) ... Unpacking replacement libstdc++6-4.4-dev ... Preparing to replace g++-4.4 4.4.3-4ubuntu5 (using .../g++-4.4_4.4.4-1ubuntu2_sparc.deb) ... Unpacking replacement g++-4.4 ... Preparing to replace gcc-4.4 4.4.3-4ubuntu5 (using .../gcc-4.4_4.4.4-1ubuntu2_sparc.deb) ... Unpacking replacement gcc-4.4 ... Preparing to replace cpp-4.4 4.4.3-4ubuntu5 (using .../cpp-4.4_4.4.4-1ubuntu2_sparc.deb) ... Unpacking replacement cpp-4.4 ... Preparing to replace binutils 2.20.1-3ubuntu5 (using .../binutils_2.20.1-9ubuntu1_sparc.deb) ... Unpacking replacement binutils ... Preparing to replace gcc-4.4-base 4.4.3-4ubuntu5 (using .../gcc-4.4-base_4.4.4-1ubuntu2_sparc.deb) ... Unpacking replacement gcc-4.4-base ... Preparing to replace insserv 1.12.0-14 (using .../insserv_1.14.0-2_sparc.deb) ... Unpacking replacement insserv ... Preparing to replace klibc-utils 1.5.17-4ubuntu1 (using .../klibc-utils_1.5.18-1_sparc.deb) ... Unpacking replacement klibc-utils ... Preparing to replace libklibc 1.5.17-4ubuntu1 (using .../libklibc_1.5.18-1_sparc.deb) ... Unpacking replacement libklibc ... Preparing to replace libnih-dbus1 1.0.1-1 (using .../libnih-dbus1_1.0.2-1_sparc.deb) ... Unpacking replacement libnih-dbus1 ... Preparing to replace libnih1 1.0.1-1 (using .../libnih1_1.0.2-1_sparc.deb) ... Unpacking replacement libnih1 ... Preparing to replace libpcre3 7.8-3build1 (using .../libpcre3_8.02-1_sparc.deb) ... Unpacking replacement libpcre3 ... Preparing to replace mountall 2.14 (using .../mountall_2.15_sparc.deb) ... Unpacking replacement mountall ... Preparing to replace apt-transport-https 0.7.25.3ubuntu7 (using .../apt-transport-https_0.7.25.3ubuntu8_sparc.deb) ... Unpacking replacement apt-transport-https ... Preparing to replace manpages 3.23-1 (using .../manpages_3.24-1_all.deb) ... Unpacking replacement manpages ... Preparing to replace build-essential 11.4build1 (using .../build-essential_11.5_sparc.deb) ... Unpacking replacement build-essential ... Preparing to replace manpages-dev 3.23-1 (using .../manpages-dev_3.24-1_all.deb) ... Unpacking replacement manpages-dev ... Preparing to replace pkg-create-dbgsym 0.42 (using .../pkg-create-dbgsym_0.43_all.deb) ... Unpacking replacement pkg-create-dbgsym ... Setting up libc-dev-bin (2.11.1-0ubuntu8) ... Setting up linux-libc-dev (2.6.34-2.9) ... Setting up libc6-dev (2.11.1-0ubuntu8) ... Setting up libc6-sparc64 (2.11.1-0ubuntu8) ... Setting up libc6-dev-sparc64 (2.11.1-0ubuntu8) ... Setting up libtasn1-3 (2.6-1) ... Setting up libgnutls26 (2.8.6-1) ... Setting up libidn11 (1.18-1) ... Setting up libkeyutils1 (1.4-1) ... Setting up readline-common (6.1-2) ... Setting up libreadline6 (6.1-2) ... Setting up lib64gcc1 (1:4.5.0-2ubuntu3) ... Setting up libgomp1 (4.5.0-2ubuntu3) ... Setting up lib64gomp1 (4.5.0-2ubuntu3) ... Setting up gcc-4.4-base (4.4.4-1ubuntu2) ... Setting up cpp-4.4 (4.4.4-1ubuntu2) ... Setting up binutils (2.20.1-9ubuntu1) ... Setting up gcc-4.4 (4.4.4-1ubuntu2) ... Setting up gcc-4.4-multilib (4.4.4-1ubuntu2) ... Setting up insserv (1.14.0-2) ... Installing new version of config file /etc/insserv.conf ... Setting up libklibc (1.5.18-1) ... Setting up klibc-utils (1.5.18-1) ... Setting up libnih1 (1.0.2-1) ... Setting up libnih-dbus1 (1.0.2-1) ... Setting up libpcre3 (8.02-1) ... Setting up mountall (2.15) ... Setting up apt-transport-https (0.7.25.3ubuntu8) ... Setting up manpages (3.24-1) ... Setting up build-essential (11.5) ... Setting up manpages-dev (3.24-1) ... Setting up pkg-create-dbgsym (0.43) ... Setting up perl-modules (5.10.1-12ubuntu1) ... Setting up perl (5.10.1-12ubuntu1) ... Setting up g++-4.4 (4.4.4-1ubuntu2) ... Setting up libstdc++6-4.4-dev (4.4.4-1ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', 'c7fd87cbec7e413ff9a2f2784d130bd7b549ad19', 'maverick', '--nolog', '--batch', '--archive=ubuntu', '--dist=maverick', '--purpose=PRIMARY', '--comp=universe', 'mach_0.9.1-3.dsc'] Initiating build c7fd87cbec7e413ff9a2f2784d130bd7b549ad19 with 0 processor cores. Automatic build of mach_0.9.1-3 on sejong by sbuild/sparc 1.170.5 Build started at 20100515-2218 ****************************************************************************** mach_0.9.1-3.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 5), cdbs, python (>= 2.2), autotools-dev, python-support (>= 0.5.3), libselinux1-dev [!hurd-i386 !kfreebsd-amd64 !kfreebsd-i386] Checking for already installed source dependencies... debhelper: missing cdbs: missing python: missing autotools-dev: missing python-support: missing libselinux1-dev: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper cdbs python autotools-dev python-support libselinux1-dev Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf automake bsdmainutils fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libexpat1 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libmagic1 libncursesw5 libsepol1-dev libsqlite3-0 liburi-perl libwww-perl libxml-parser-perl libxml2 m4 man-db mime-support po-debconf python2.6 Suggested packages: autoconf2.13 autoconf-archive gnu-standards autoconf-doc libtool wamerican wordlist whois vacation devscripts doc-base dh-make gettext-doc groff libdata-dump-perl libcrypt-ssleay-perl libio-socket-ssl-perl less www-browser libmail-box-perl python-doc python-tk python-profiler python2.6-doc python2.6-profiler Recommended packages: curl wget lynx cvs libgpm2 libmailtools-perl libhtml-format-perl xml-core libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils cdbs debhelper fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libexpat1 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libmagic1 libncursesw5 libselinux1-dev libsepol1-dev libsqlite3-0 liburi-perl libwww-perl libxml-parser-perl libxml2 m4 man-db mime-support po-debconf python python-support python2.6 0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 14.9MB of archives. After this operation, 48.9MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file libncursesw5 libsqlite3-0 mime-support python2.6 python bsdmainutils gettext-base groff-base libexpat1 liburi-perl libhtml-tagset-perl libhtml-parser-perl libhtml-tree-perl libwww-perl libxml-parser-perl libxml2 man-db python-support m4 autoconf autotools-dev automake html2text libcroco3 gettext intltool-debian po-debconf debhelper fdupes intltool cdbs libsepol1-dev libselinux1-dev Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ maverick/main libmagic1 5.03-5ubuntu1 [400kB] Get:2 http://ftpmaster.internal/ubuntu/ maverick/main file 5.03-5ubuntu1 [48.2kB] Get:3 http://ftpmaster.internal/ubuntu/ maverick/main libncursesw5 5.7+20090803-2ubuntu3 [216kB] Get:4 http://ftpmaster.internal/ubuntu/ maverick/main libsqlite3-0 3.6.23.1-2 [365kB] Get:5 http://ftpmaster.internal/ubuntu/ maverick/main mime-support 3.48-1ubuntu1 [34.6kB] Get:6 http://ftpmaster.internal/ubuntu/ maverick/main python2.6 2.6.5-1ubuntu6 [2488kB] Get:7 http://ftpmaster.internal/ubuntu/ maverick/main python 2.6.5-0ubuntu1 [148kB] Get:8 http://ftpmaster.internal/ubuntu/ maverick/main bsdmainutils 8.0.1ubuntu1 [196kB] Get:9 http://ftpmaster.internal/ubuntu/ maverick/main gettext-base 0.17-8ubuntu3 [70.3kB] Get:10 http://ftpmaster.internal/ubuntu/ maverick/main groff-base 1.20.1-10 [1119kB] Get:11 http://ftpmaster.internal/ubuntu/ maverick/main libexpat1 2.0.1-7ubuntu1 [133kB] Get:12 http://ftpmaster.internal/ubuntu/ maverick/main liburi-perl 1.54-1 [98.1kB] Get:13 http://ftpmaster.internal/ubuntu/ maverick/main libhtml-tagset-perl 3.20-2 [13.5kB] Get:14 http://ftpmaster.internal/ubuntu/ maverick/main libhtml-parser-perl 3.65-1 [112kB] Get:15 http://ftpmaster.internal/ubuntu/ maverick/main libhtml-tree-perl 3.23-2 [208kB] Get:16 http://ftpmaster.internal/ubuntu/ maverick/main libwww-perl 5.835-1 [402kB] Get:17 http://ftpmaster.internal/ubuntu/ maverick/main libxml-parser-perl 2.36-1.1build3 [324kB] Get:18 http://ftpmaster.internal/ubuntu/ maverick/main libxml2 2.7.6.dfsg-1ubuntu1 [829kB] Get:19 http://ftpmaster.internal/ubuntu/ maverick/main man-db 2.5.7-3 [1093kB] Get:20 http://ftpmaster.internal/ubuntu/ maverick/main python-support 1.0.7ubuntu1 [33.0kB] Get:21 http://ftpmaster.internal/ubuntu/ maverick/main m4 1.4.14-2 [276kB] Get:22 http://ftpmaster.internal/ubuntu/ maverick/main autoconf 2.65-3ubuntu1 [772kB] Get:23 http://ftpmaster.internal/ubuntu/ maverick/main autotools-dev 20100122.1 [70.7kB] Get:24 http://ftpmaster.internal/ubuntu/ maverick/main automake 1:1.11.1-1 [608kB] Get:25 http://ftpmaster.internal/ubuntu/ maverick/main html2text 1.3.2a-14build1 [100kB] Get:26 http://ftpmaster.internal/ubuntu/ maverick/main libcroco3 0.6.2-1 [95.2kB] Get:27 http://ftpmaster.internal/ubuntu/ maverick/main gettext 0.17-8ubuntu3 [1768kB] Get:28 http://ftpmaster.internal/ubuntu/ maverick/main intltool-debian 0.35.0+20060710.1 [31.6kB] Get:29 http://ftpmaster.internal/ubuntu/ maverick/main po-debconf 1.0.16 [224kB] Get:30 http://ftpmaster.internal/ubuntu/ maverick/main debhelper 7.4.19ubuntu1 [467kB] Get:31 http://ftpmaster.internal/ubuntu/ maverick/main fdupes 1.50-PR2-2build1 [20.0kB] Get:32 http://ftpmaster.internal/ubuntu/ maverick/main intltool 0.41.0-0ubuntu1 [52.5kB] Get:33 http://ftpmaster.internal/ubuntu/ maverick/main cdbs 0.4.83ubuntu1 [1201kB] Get:34 http://ftpmaster.internal/ubuntu/ maverick/main libsepol1-dev 2.0.40-2 [538kB] Get:35 http://ftpmaster.internal/ubuntu/ maverick/main libselinux1-dev 2.0.94-1 [312kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 14.9MB in 0s (15.3MB/s) Selecting previously deselected package libmagic1. (Reading database ... 13703 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_5.03-5ubuntu1_sparc.deb) ... Selecting previously deselected package file. Unpacking file (from .../file_5.03-5ubuntu1_sparc.deb) ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20090803-2ubuntu3_sparc.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.6.23.1-2_sparc.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.48-1ubuntu1_all.deb) ... Selecting previously deselected package python2.6. Unpacking python2.6 (from .../python2.6_2.6.5-1ubuntu6_sparc.deb) ... Selecting previously deselected package python. Unpacking python (from .../python_2.6.5-0ubuntu1_all.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.0.1ubuntu1_sparc.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-8ubuntu3_sparc.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.20.1-10_sparc.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-7ubuntu1_sparc.deb) ... Selecting previously deselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.54-1_all.deb) ... Selecting previously deselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously deselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.65-1_sparc.deb) ... Selecting previously deselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_3.23-2_all.deb) ... Selecting previously deselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_5.835-1_all.deb) ... Selecting previously deselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.36-1.1build3_sparc.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.6.dfsg-1ubuntu1_sparc.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.7-3_sparc.deb) ... Selecting previously deselected package python-support. Unpacking python-support (from .../python-support_1.0.7ubuntu1_all.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../archives/m4_1.4.14-2_sparc.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.65-3ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20100122.1_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.11.1-1_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-14build1_sparc.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_sparc.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-8ubuntu3_sparc.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.4.19ubuntu1_all.deb) ... Selecting previously deselected package fdupes. Unpacking fdupes (from .../fdupes_1.50-PR2-2build1_sparc.deb) ... Selecting previously deselected package intltool. Unpacking intltool (from .../intltool_0.41.0-0ubuntu1_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.83ubuntu1_all.deb) ... Selecting previously deselected package libsepol1-dev. Unpacking libsepol1-dev (from .../libsepol1-dev_2.0.40-2_sparc.deb) ... Selecting previously deselected package libselinux1-dev. Unpacking libselinux1-dev (from .../libselinux1-dev_2.0.94-1_sparc.deb) ... Setting up libmagic1 (5.03-5ubuntu1) ... Setting up file (5.03-5ubuntu1) ... Setting up libncursesw5 (5.7+20090803-2ubuntu3) ... Setting up libsqlite3-0 (3.6.23.1-2) ... Setting up mime-support (3.48-1ubuntu1) ... update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode. Setting up python2.6 (2.6.5-1ubuntu6) ... Setting up python (2.6.5-0ubuntu1) ... Setting up bsdmainutils (8.0.1ubuntu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. Setting up gettext-base (0.17-8ubuntu3) ... Setting up groff-base (1.20.1-10) ... Setting up libexpat1 (2.0.1-7ubuntu1) ... Setting up liburi-perl (1.54-1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up libhtml-parser-perl (3.65-1) ... Setting up libhtml-tree-perl (3.23-2) ... Setting up libwww-perl (5.835-1) ... Setting up libxml-parser-perl (2.36-1.1build3) ... Setting up libxml2 (2.7.6.dfsg-1ubuntu1) ... Setting up man-db (2.5.7-3) ... Building database of manual pages ... Setting up python-support (1.0.7ubuntu1) ... Setting up m4 (1.4.14-2) ... Setting up autoconf (2.65-3ubuntu1) ... Setting up autotools-dev (20100122.1) ... Setting up automake (1:1.11.1-1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode. Setting up html2text (1.3.2a-14build1) ... Setting up libcroco3 (0.6.2-1) ... Setting up gettext (0.17-8ubuntu3) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16) ... Setting up debhelper (7.4.19ubuntu1) ... Setting up fdupes (1.50-PR2-2build1) ... Setting up intltool (0.41.0-0ubuntu1) ... Setting up cdbs (0.4.83ubuntu1) ... Setting up libsepol1-dev (2.0.40-2) ... Setting up libselinux1-dev (2.0.94-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.11.1-0ubuntu8 make_3.81-7ubuntu1 dpkg-dev_1.15.5.6ubuntu4 gcc-4.4_4.4.4-1ubuntu2 g++-4.4_4.4.4-1ubuntu2 binutils_2.20.1-9ubuntu1 libstdc++6_4.5.0-2ubuntu3 libstdc++6-4.4-dev_4.4.4-1ubuntu2 ------------------------------------------------------------------------------ gpgv: Signature made Mon Apr 19 10:16:32 2010 UTC using DSA key ID 2B0920C0 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./mach_0.9.1-3.dsc dpkg-source: info: extracting mach in mach-0.9.1 dpkg-source: info: unpacking mach_0.9.1.orig.tar.gz dpkg-source: info: applying mach_0.9.1-3.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package mach dpkg-buildpackage: source version 0.9.1-3 dpkg-buildpackage: host architecture sparc /usr/bin/fakeroot debian/rules clean test -x debian/rules dh_testroot rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . -k distclean make[1]: Entering directory `/build/buildd/mach-0.9.1' make[1]: *** No rule to make target `distclean'. make[1]: Leaving directory `/build/buildd/mach-0.9.1' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-autotools rmdir --ignore-fail-on-non-empty . rmdir: failed to remove `.': Invalid argument make: [makefile-clean] Error 1 (ignored) for i in ./config.guess ./config.sub ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done dh_clean /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/build/buildd/mach-0.9.1' for i in ./config.guess ./config.sub ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done make[1]: Leaving directory `/build/buildd/mach-0.9.1' if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "reverse-patches" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi for dir in debian/patches ; do \ rm -f $dir/*.log ; \ done rm -f debian/cdbs-install-list debian/cdbs-package-list debian/stamp-copyright-check debian/stamp-buildinfo rm -f debian/stamp-autotools-files debian/rules build test -x debian/rules mkdir -p "." WARNING: copyright-check disabled - touch debian/copyright_hints to enable. touch debian/stamp-copyright-check /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/build/buildd/mach-0.9.1' for i in ./config.guess ./config.sub ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done make[1]: Leaving directory `/build/buildd/mach-0.9.1' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi make[1]: Entering directory `/build/buildd/mach-0.9.1' if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi make[1]: Leaving directory `/build/buildd/mach-0.9.1' if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi touch debian/stamp-autotools-files chmod a+x /build/buildd/mach-0.9.1/./configure mkdir -p . cd . && CFLAGS="-g -O2 -g -Wall -O2" CXXFLAGS="-g -O2 -g -Wall -O2" CPPFLAGS="" LDFLAGS="-Wl,-Bsymbolic-functions" /build/buildd/mach-0.9.1/./configure --build=sparc-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/mach" --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules --srcdir=. --enable-selinux --sbindir=/usr/lib/mach/sbin configure: configuring mach for release checking build system type... sparc-unknown-linux-gnu checking host system type... sparc-unknown-linux-gnu checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for a sed that does not truncate output... /bin/sed checking for egrep... grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for epcf90... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for gfortran... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 65536 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking dependency style of g++... none configure: Storing configuration files in /etc configure: Using localstatedir /var configure: Using libdir /usr/lib configure: Using rootsdir /var/lib/mach/roots configure: Using archivesdir /var/cache/mach/archives configure: Using statesdir /var/lib/mach/states configure: Using build username machbuild configure: Using build groupname machbuild configure: Using default root checking if the system is running selinux... yes configure: Compiling with SELinux support: yes configure: Using default root configure: Placing mach-helper in /usr/lib/mach/sbin checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ANSI C... (cached) none needed configure: Looking for Python version >= 2.2 checking for python... /usr/bin/python checking "/usr/bin/python":... okay checking local Python configuration... looks good configure: creating ./config.status config.status: creating Makefile config.status: creating etc/Makefile config.status: creating etc/conf config.status: creating etc/dist.d/Makefile config.status: creating m4/Makefile config.status: creating mach.spec config.status: creating scripts/Makefile config.status: creating scripts/mach config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands touch debian/stamp-autotools /usr/bin/make -C . make[1]: Entering directory `/build/buildd/mach-0.9.1' /usr/bin/make all-recursive make[2]: Entering directory `/build/buildd/mach-0.9.1' Making all in scripts make[3]: Entering directory `/build/buildd/mach-0.9.1/scripts' chmod +x mach make[3]: Leaving directory `/build/buildd/mach-0.9.1/scripts' Making all in etc make[3]: Entering directory `/build/buildd/mach-0.9.1/etc' Making all in dist.d make[4]: Entering directory `/build/buildd/mach-0.9.1/etc/dist.d' make[4]: Nothing to be done for `all'. make[4]: Leaving directory `/build/buildd/mach-0.9.1/etc/dist.d' make[4]: Entering directory `/build/buildd/mach-0.9.1/etc' make[4]: Nothing to be done for `all-am'. make[4]: Leaving directory `/build/buildd/mach-0.9.1/etc' make[3]: Leaving directory `/build/buildd/mach-0.9.1/etc' Making all in src make[3]: Entering directory `/build/buildd/mach-0.9.1/src' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Werror -g -O2 -g -Wall -O2 -c -o selinux-mach.lo selinux-mach.c mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Werror -g -O2 -g -Wall -O2 -c selinux-mach.c -fPIC -DPIC -o .libs/selinux-mach.o /bin/bash ../libtool --tag=CC --mode=link gcc -Wall -Werror -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o libselinux-mach.la -rpath /usr/lib selinux-mach.lo gcc -shared .libs/selinux-mach.o -Wl,-Bsymbolic-functions -Wl,-soname -Wl,libselinux-mach.so.0 -o .libs/libselinux-mach.so.0.0.0 (cd .libs && rm -f libselinux-mach.so.0 && ln -s libselinux-mach.so.0.0.0 libselinux-mach.so.0) (cd .libs && rm -f libselinux-mach.so && ln -s libselinux-mach.so.0.0.0 libselinux-mach.so) creating libselinux-mach.la (cd .libs && rm -f libselinux-mach.la && ln -s ../libselinux-mach.la libselinux-mach.la) gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Werror -g -O2 -g -Wall -O2 -c mach-helper.c /bin/bash ../libtool --tag=CC --mode=link gcc -Wall -Werror -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o mach-helper mach-helper.o gcc -Wall -Werror -g -O2 -g -Wall -O2 -Wl,-Bsymbolic-functions -o mach-helper mach-helper.o make[3]: Leaving directory `/build/buildd/mach-0.9.1/src' Making all in m4 make[3]: Entering directory `/build/buildd/mach-0.9.1/m4' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/build/buildd/mach-0.9.1/m4' make[3]: Entering directory `/build/buildd/mach-0.9.1' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/build/buildd/mach-0.9.1' make[2]: Leaving directory `/build/buildd/mach-0.9.1' make[1]: Leaving directory `/build/buildd/mach-0.9.1' touch debian/stamp-makefile-build DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/fakeroot debian/rules binary-arch test -x debian/rules dh_testroot dh_clean -k dh_installdirs -A mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi DEB_MAKE_CHECK_TARGET unset, not running checks WARNING: buildinfo disabled - dh_buildinfo (from dh-buildinfo package) is missing. touch debian/stamp-buildinfo /usr/bin/make -C . install DESTDIR=/build/buildd/mach-0.9.1/debian/mach/ make[1]: Entering directory `/build/buildd/mach-0.9.1' Making install in scripts make[2]: Entering directory `/build/buildd/mach-0.9.1/scripts' make[3]: Entering directory `/build/buildd/mach-0.9.1/scripts' test -z "/usr/bin" || mkdir -p -- "/build/buildd/mach-0.9.1/debian/mach//usr/bin" /usr/bin/install -c 'mach' '/build/buildd/mach-0.9.1/debian/mach//usr/bin/mach' make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/mach-0.9.1/scripts' make[2]: Leaving directory `/build/buildd/mach-0.9.1/scripts' Making install in etc make[2]: Entering directory `/build/buildd/mach-0.9.1/etc' Making install in dist.d make[3]: Entering directory `/build/buildd/mach-0.9.1/etc/dist.d' make[4]: Entering directory `/build/buildd/mach-0.9.1/etc/dist.d' make[4]: Nothing to be done for `install-exec-am'. test -z "/etc/mach/dist.d" || mkdir -p -- "/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d" /usr/bin/install -c -m 644 'redhat-70-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/redhat-70-i386' /usr/bin/install -c -m 644 'redhat-71-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/redhat-71-i386' /usr/bin/install -c -m 644 'redhat-72-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/redhat-72-i386' /usr/bin/install -c -m 644 'redhat-73-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/redhat-73-i386' /usr/bin/install -c -m 644 'redhat-80-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/redhat-80-i386' /usr/bin/install -c -m 644 'redhat-9-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/redhat-9-i386' /usr/bin/install -c -m 644 'fedora-1-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-1-i386' /usr/bin/install -c -m 644 'fedora-2-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-2-i386' /usr/bin/install -c -m 644 'fedora-3-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-3-i386' /usr/bin/install -c -m 644 'fedora-3-x86_64' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-3-x86_64' /usr/bin/install -c -m 644 'fedora-4-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-4-i386' /usr/bin/install -c -m 644 'fedora-4-x86_64' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-4-x86_64' /usr/bin/install -c -m 644 'fedora-5-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-5-i386' /usr/bin/install -c -m 644 'fedora-5-x86_64' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-5-x86_64' /usr/bin/install -c -m 644 'fedora-6-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-6-i386' /usr/bin/install -c -m 644 'fedora-6-x86_64' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-6-x86_64' /usr/bin/install -c -m 644 'fedora-development-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-development-i386' /usr/bin/install -c -m 644 'fedora-development-x86_64' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/fedora-development-x86_64' /usr/bin/install -c -m 644 'centos-4-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/centos-4-i386' /usr/bin/install -c -m 644 'centos-4-x86_64' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/centos-4-x86_64' /usr/bin/install -c -m 644 'cnc-9-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/cnc-9-i386' /usr/bin/install -c -m 644 'suse-81-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/suse-81-i386' /usr/bin/install -c -m 644 'suse-82-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/suse-82-i386' /usr/bin/install -c -m 644 'suse-90-i386' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/suse-90-i386' /usr/bin/install -c -m 644 'yellowdog-23-ppc' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/yellowdog-23-ppc' /usr/bin/install -c -m 644 'yellowdog-30-ppc' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/yellowdog-30-ppc' /usr/bin/install -c -m 644 'davedina' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/dist.d/davedina' make[4]: Leaving directory `/build/buildd/mach-0.9.1/etc/dist.d' make[3]: Leaving directory `/build/buildd/mach-0.9.1/etc/dist.d' make[3]: Entering directory `/build/buildd/mach-0.9.1/etc' make[4]: Entering directory `/build/buildd/mach-0.9.1/etc' make[4]: Nothing to be done for `install-exec-am'. test -z "/etc/mach" || mkdir -p -- "/build/buildd/mach-0.9.1/debian/mach//etc/mach" /usr/bin/install -c -m 644 'conf' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/conf' /usr/bin/install -c -m 644 'location' '/build/buildd/mach-0.9.1/debian/mach//etc/mach/location' make[4]: Leaving directory `/build/buildd/mach-0.9.1/etc' make[3]: Leaving directory `/build/buildd/mach-0.9.1/etc' make[2]: Leaving directory `/build/buildd/mach-0.9.1/etc' Making install in src make[2]: Entering directory `/build/buildd/mach-0.9.1/src' make[3]: Entering directory `/build/buildd/mach-0.9.1/src' test -z "/usr/lib" || mkdir -p -- "/build/buildd/mach-0.9.1/debian/mach//usr/lib" /bin/bash ../libtool --mode=install /usr/bin/install -c 'libselinux-mach.la' '/build/buildd/mach-0.9.1/debian/mach//usr/lib/libselinux-mach.la' /usr/bin/install -c .libs/libselinux-mach.so.0.0.0 /build/buildd/mach-0.9.1/debian/mach//usr/lib/libselinux-mach.so.0.0.0 (cd /build/buildd/mach-0.9.1/debian/mach//usr/lib && { ln -s -f libselinux-mach.so.0.0.0 libselinux-mach.so.0 || { rm -f libselinux-mach.so.0 && ln -s libselinux-mach.so.0.0.0 libselinux-mach.so.0; }; }) (cd /build/buildd/mach-0.9.1/debian/mach//usr/lib && { ln -s -f libselinux-mach.so.0.0.0 libselinux-mach.so || { rm -f libselinux-mach.so && ln -s libselinux-mach.so.0.0.0 libselinux-mach.so; }; }) /usr/bin/install -c .libs/libselinux-mach.lai /build/buildd/mach-0.9.1/debian/mach//usr/lib/libselinux-mach.la libtool: install: warning: remember to run `libtool --finish /usr/lib' test -z "/usr/lib/mach/sbin" || mkdir -p -- "/build/buildd/mach-0.9.1/debian/mach//usr/lib/mach/sbin" /bin/bash ../libtool --mode=install /usr/bin/install -c 'mach-helper' '/build/buildd/mach-0.9.1/debian/mach//usr/lib/mach/sbin/mach-helper' /usr/bin/install -c mach-helper /build/buildd/mach-0.9.1/debian/mach//usr/lib/mach/sbin/mach-helper make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/mach-0.9.1/src' make[2]: Leaving directory `/build/buildd/mach-0.9.1/src' Making install in m4 make[2]: Entering directory `/build/buildd/mach-0.9.1/m4' make[3]: Entering directory `/build/buildd/mach-0.9.1/m4' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/mach-0.9.1/m4' make[2]: Leaving directory `/build/buildd/mach-0.9.1/m4' make[2]: Entering directory `/build/buildd/mach-0.9.1' make[3]: Entering directory `/build/buildd/mach-0.9.1' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/mach-0.9.1' make[2]: Leaving directory `/build/buildd/mach-0.9.1' make[1]: Leaving directory `/build/buildd/mach-0.9.1' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/mach.substvars dh_installdirs -pmach dh_installdocs -pmach ./README ./NEWS ./TODO ./AUTHORS FORGETMENOT RELEASE mach.doap dh_installexamples -pmach dh_installman -pmach dh_installinfo -pmach dh_installmenu -pmach dh_installcron -pmach dh_installinit -pmach Duplicate specification "O=s" for option "O" dh_installdebconf -pmach dh_installemacsen -pmach dh_installcatalogs -pmach dh_installpam -pmach dh_installlogrotate -pmach dh_installlogcheck -pmach dh_installchangelogs -pmach dh_installudev -pmach dh_lintian -pmach dh_install -pmach dh_link -pmach dh_installmime -pmach # generate ; /usr/bin/mach is a Python script dh_pysupport -pmach # set SUID root, group executable, and world readable; the upstream # build doesn't adjust permissions # XXX the permissions are also fixed in debian/mach.postinst since # "chgrp" resets these chmod 4754 debian/mach/usr/lib/mach/sbin/mach-helper # drop useless and dangerous *.la files rm -f debian/mach/usr/lib/libselinux-mach.la dh_strip -pmach dh_strip debug symbol extraction: all non-arch-all packages for this build platform sparc: mach dh_strip debug symbol extraction: packages to act on: mach dh_strip debug symbol extraction: ignored packages: WARNING: not running pkgbinarymangler for this package, as requested dpkg-deb: building package `mach-dbgsym' in `../mach-dbgsym_0.9.1-3_sparc.ddeb'. dh_compress -pmach dh_fixperms -pmach -X usr/lib/mach/sbin/mach-helper dh_makeshlibs -pmach dh_installdeb -pmach dh_perl -pmach dh_shlibdeps -pmach dh_gencontrol -pmach # symlink identical documentation to depending packages [ -n "$CDBS_NO_DOC_SYMLINKING" ] || \ [ -h debian/mach/usr/share/doc ] || \ [ -h debian/mach/usr/share/doc/mach ] || \ [ ! -d debian/mach/usr/share/doc ] || \ for dep in `perl -ne 'if (/^(Pre-)?Depends:/) {s/^\w+://; foreach (split /,/) { split; print($_[0], "\n"); } }' debian/mach/DEBIAN/control`; do \ if [ -d debian/$dep/usr/share/doc ]; then \ echo "Searching for duplicated docs in dependency $dep..."; \ rootdir=`pwd`; \ (cd debian/mach/usr/share/doc/mach; find -type f ! -name copyright | while read f; do \ thisfile="$rootdir/debian/mach/usr/share/doc/mach/$f"; \ depfile="$rootdir/debian/$dep/usr/share/doc/$dep/$f"; \ if [ -f $depfile -o -L $depfile ] && zcmp $thisfile $depfile >/dev/null; then \ echo " symlinking $f in mach to file in $dep"; \ rm $thisfile; ln -s /usr/share/doc/$dep/$f $thisfile; \ fi; \ done ); \ fi; \ done # symlink identical Gnome help files within packages if [ -z "$CDBS_NO_GNOME_HELP_SYMLINKING" ] && [ -d debian/mach/usr/share/gnome/help ]; then \ cd debian/mach && LC_ALL=C fdupes -r1nq usr/share/gnome/help | while read s; do \ set -- $(echo $s | tr ' ' '\n' | sort); \ f=$1; shift; \ for d; do \ echo "symlinking duplicate Gnome help file $d to $f"; \ rm $d; ln -s /$f $d; \ done; \ done; \ fi dh_link -p mach dh_md5sums -pmach dh_builddeb -pmach pkgstriptranslations: processing control file: ./debian/mach/DEBIAN/control, package mach, directory ./debian/mach pkgstriptranslations: mach does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " dpkg-deb: warning: 'debian/mach/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warnings about the control file(s) dpkg-deb: building package `mach' in `../mach_0.9.1-3_sparc.deb'. dpkg-genchanges -B -mUbuntu/sparc Build Daemon >../mach_0.9.1-3_sparc.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20100515-2221 Publishing debug debs. chroot-autobuild/build/buildd/mach_0.9.1-3_sparc.deb: new debian package, version 2.0. size 59042 bytes: control archive= 2711 bytes. 934 bytes, 30 lines conffiles 1553 bytes, 42 lines control 884 bytes, 14 lines md5sums 2014 bytes, 61 lines * postinst #!/bin/sh 132 bytes, 7 lines * postrm #!/bin/sh 1030 bytes, 37 lines * prerm #!/bin/sh 23 bytes, 1 lines shlibs Package: mach Version: 0.9.1-3 Architecture: sparc Maintainer: Ubuntu Developers Original-Maintainer: Loïc Minier Installed-Size: 456 Depends: libc6 (>= 2.6), python, rpm (>= 4.1), yum | apt-rpm-client (>= 0.5.5cnc2), python-rpm, adduser Recommends: cpio, gnupg Section: admin Priority: optional Description: make a chroot of a rpm-based distribution mach allows you to set up clean roots from scratch for any distribution or distribution variation supported. . This clean build root can be used for several goals: - making clean packages - set up chroots for services to run it - make disk images of clean roots (for example for UML) . Currently, mach works for rpm-based distributions that can work with apt for rpm. . Included at this moment is the necessary information to set up: - Fedora 1, 2, 3, 4, 5, 6, and development - Red Hat 7.0, 7.1, 7.2, 7.3, 8, and 9 - CentOS 4 - Dave/Dina - Conectiva 9 - SuSE 8.1, 8.2, and 9.0 - Yellowdog 2.3, and 3.0 . Some handy features of mach include: - "caching" of downloaded packages using the build hosts's apt the build root - ensures clean packages by reverting to the base set of build packages - uses apt to resolve dependencies - parsing of BuildRequires to install necessary packages for building - build ordering when doing multiple builds - support for flavours of distribution - multiple build roots - locking of buildroot to avoid concurrent builds - optional signing of built packages chroot-autobuild/build/buildd/mach_0.9.1-3_sparc.deb: drwxr-xr-x root/root 0 2010-05-15 22:20 ./ drwxr-xr-x root/root 0 2010-05-15 22:20 ./var/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./var/cache/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./var/cache/mach/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./var/lib/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./var/lib/mach/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./var/lib/mach/roots/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./var/lib/mach/states/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./usr/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./usr/bin/ -rwxr-xr-x root/root 99238 2010-05-15 22:20 ./usr/bin/mach drwxr-xr-x root/root 0 2010-05-15 22:21 ./usr/lib/ -rw-r--r-- root/root 9456 2010-05-15 22:20 ./usr/lib/libselinux-mach.so.0.0.0 drwxr-xr-x root/root 0 2010-05-15 22:20 ./usr/lib/mach/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./usr/lib/mach/sbin/ -rwsr-xr-- root/root 9788 2010-05-15 22:20 ./usr/lib/mach/sbin/mach-helper drwxr-xr-x root/root 0 2010-05-15 22:20 ./usr/share/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./usr/share/doc/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./usr/share/doc/mach/ -rw-r--r-- root/root 1743 2007-01-07 21:33 ./usr/share/doc/mach/NEWS.gz -rw-r--r-- root/root 1221 2007-01-07 21:35 ./usr/share/doc/mach/mach.doap.gz -rw-r--r-- root/root 57 2005-02-05 08:53 ./usr/share/doc/mach/AUTHORS -rw-r--r-- root/root 824 2005-02-05 08:53 ./usr/share/doc/mach/FORGETMENOT -rw-r--r-- root/root 3207 2007-01-07 21:37 ./usr/share/doc/mach/RELEASE -rw-r--r-- root/root 2163 2010-05-15 22:20 ./usr/share/doc/mach/README.Debian -rw-r--r-- root/root 1123 2010-05-15 22:20 ./usr/share/doc/mach/TODO.Debian -rw-r--r-- root/root 1185 2010-05-15 22:20 ./usr/share/doc/mach/copyright -rw-r--r-- root/root 4251 2007-01-07 21:36 ./usr/share/doc/mach/README.gz -rw-r--r-- root/root 2252 2007-01-07 21:37 ./usr/share/doc/mach/TODO.gz -rw-r--r-- root/root 503 2010-05-15 22:20 ./usr/share/doc/mach/changelog.Debian.gz drwxr-xr-x root/root 0 2010-05-15 22:20 ./etc/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./etc/mach/ drwxr-xr-x root/root 0 2010-05-15 22:20 ./etc/mach/dist.d/ -rw-r--r-- root/root 2138 2010-05-15 22:20 ./etc/mach/dist.d/redhat-70-i386 -rw-r--r-- root/root 2184 2010-05-15 22:20 ./etc/mach/dist.d/redhat-71-i386 -rw-r--r-- root/root 3008 2010-05-15 22:20 ./etc/mach/dist.d/redhat-72-i386 -rw-r--r-- root/root 2908 2010-05-15 22:20 ./etc/mach/dist.d/redhat-73-i386 -rw-r--r-- root/root 7113 2010-05-15 22:20 ./etc/mach/dist.d/redhat-80-i386 -rw-r--r-- root/root 6939 2010-05-15 22:20 ./etc/mach/dist.d/redhat-9-i386 -rw-r--r-- root/root 6272 2010-05-15 22:20 ./etc/mach/dist.d/fedora-1-i386 -rw-r--r-- root/root 6547 2010-05-15 22:20 ./etc/mach/dist.d/fedora-2-i386 -rw-r--r-- root/root 6632 2010-05-15 22:20 ./etc/mach/dist.d/fedora-3-i386 -rw-r--r-- root/root 6682 2010-05-15 22:20 ./etc/mach/dist.d/fedora-3-x86_64 -rw-r--r-- root/root 5692 2010-05-15 22:20 ./etc/mach/dist.d/fedora-4-i386 -rw-r--r-- root/root 5828 2010-05-15 22:20 ./etc/mach/dist.d/fedora-4-x86_64 -rw-r--r-- root/root 5597 2010-05-15 22:20 ./etc/mach/dist.d/fedora-5-i386 -rw-r--r-- root/root 5646 2010-05-15 22:20 ./etc/mach/dist.d/fedora-5-x86_64 -rw-r--r-- root/root 5597 2010-05-15 22:20 ./etc/mach/dist.d/fedora-6-i386 -rw-r--r-- root/root 5646 2010-05-15 22:20 ./etc/mach/dist.d/fedora-6-x86_64 -rw-r--r-- root/root 2959 2010-05-15 22:20 ./etc/mach/dist.d/fedora-development-i386 -rw-r--r-- root/root 3074 2010-05-15 22:20 ./etc/mach/dist.d/fedora-development-x86_64 -rw-r--r-- root/root 5165 2010-05-15 22:20 ./etc/mach/dist.d/centos-4-i386 -rw-r--r-- root/root 5214 2010-05-15 22:20 ./etc/mach/dist.d/centos-4-x86_64 -rw-r--r-- root/root 1238 2010-05-15 22:20 ./etc/mach/dist.d/cnc-9-i386 -rw-r--r-- root/root 1287 2010-05-15 22:20 ./etc/mach/dist.d/suse-81-i386 -rw-r--r-- root/root 1345 2010-05-15 22:20 ./etc/mach/dist.d/suse-82-i386 -rw-r--r-- root/root 1306 2010-05-15 22:20 ./etc/mach/dist.d/suse-90-i386 -rw-r--r-- root/root 2104 2010-05-15 22:20 ./etc/mach/dist.d/yellowdog-23-ppc -rw-r--r-- root/root 2087 2010-05-15 22:20 ./etc/mach/dist.d/yellowdog-30-ppc -rw-r--r-- root/root 1342 2010-05-15 22:20 ./etc/mach/dist.d/davedina -rw-r--r-- root/root 5162 2010-05-15 22:20 ./etc/mach/dist.d/centos-5-i386 -rw-r--r-- root/root 1296 2010-05-15 22:20 ./etc/mach/conf -rw-r--r-- root/root 2042 2010-05-15 22:20 ./etc/mach/location lrwxrwxrwx root/root 0 2010-05-15 22:21 ./usr/lib/libselinux-mach.so.0 -> libselinux-mach.so.0.0.0 lrwxrwxrwx root/root 0 2010-05-15 22:21 ./usr/lib/libselinux-mach.so -> libselinux-mach.so.0.0.0 mach_0.9.1-3_sparc.changes: Format: 1.8 Date: Mon, 19 Apr 2010 10:04:40 +0200 Source: mach Binary: mach Architecture: sparc Version: 0.9.1-3 Distribution: maverick Urgency: low Maintainer: Ubuntu/sparc Build Daemon Changed-By: Loïc Minier Description: mach - make a chroot of a rpm-based distribution Closes: 559714 Changes: mach (0.9.1-3) unstable; urgency=low . * Wrap build-deps and deps. * Bump up Standards-Version to 3.8.4. * Switch to my @debian.org address and use utf-8. * Don't repeat Priority/Section in the binary package entry. * Add watch file. * Only build-dep and enable selinux on linux, disable it otherwise; thanks Cyril Brulebois; closes: #559714. * Don't create /var/tmp/mach. Checksums-Sha1: dbfb9ee5d1601cf1de32eb20533c81c0ecdc02a0 59042 mach_0.9.1-3_sparc.deb Checksums-Sha256: 825852d5223b6bd679511c33dce1d0c066c7193e793785ad3b7d5284924289c0 59042 mach_0.9.1-3_sparc.deb Files: 8e4dad17fe3d01f67581e8167f9eb303 59042 admin optional mach_0.9.1-3_sparc.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/mach-0.9.1 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge groff-base mime-support m4 gettext file libhtml-parser-perl intltool libselinux1-dev libwww-perl liburi-perl libhtml-tree-perl autotools-dev po-debconf python2.6 libxml-parser-perl libcroco3 libhtml-tagset-perl python-support libxml2 automake libsepol1-dev man-db intltool-debian cdbs html2text gettext-base debhelper python libmagic1 libexpat1 libsqlite3-0 bsdmainutils fdupes autoconf libncursesw5 (Reading database ... 16340 files and directories currently installed.) Removing libselinux1-dev ... Removing python-support ... Purging configuration files for python-support ... Removing libsepol1-dev ... Removing cdbs ... Removing debhelper ... Removing python ... Purging configuration files for python ... Removing fdupes ... Removing intltool ... Removing po-debconf ... Removing python2.6 ... Purging configuration files for python2.6 ... Removing libxml-parser-perl ... Removing automake ... Removing man-db ... Purging configuration files for man-db ... Removing catpages as well as /var/cache/man hierarchy. Removing intltool-debian ... Removing html2text ... Purging configuration files for html2text ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing libsqlite3-0 ... Purging configuration files for libsqlite3-0 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing autoconf ... Purging configuration files for autoconf ... Removing libncursesw5 ... Purging configuration files for libncursesw5 ... Removing groff-base ... Purging configuration files for groff-base ... Removing mime-support ... Purging configuration files for mime-support ... Removing m4 ... Removing gettext ... Removing file ... Purging configuration files for file ... Removing libwww-perl ... Removing libhtml-tree-perl ... Removing autotools-dev ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing gettext-base ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libhtml-parser-perl ... Removing liburi-perl ... Removing libhtml-tagset-perl ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20100515-2221 Build needed 00:00:44, 3176k disk space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', 'c7fd87cbec7e413ff9a2f2784d130bd7b549ad19'] Scanning for processes to kill in build /home/buildd/build-c7fd87cbec7e413ff9a2f2784d130bd7b549ad19/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', 'c7fd87cbec7e413ff9a2f2784d130bd7b549ad19'] Unmounting chroot for build c7fd87cbec7e413ff9a2f2784d130bd7b549ad19... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', 'c7fd87cbec7e413ff9a2f2784d130bd7b549ad19'] Removing build c7fd87cbec7e413ff9a2f2784d130bd7b549ad19