RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', 'b3bc89fe41cf989a0606b5b618913b759a917443', '/home/buildd/filecache-default/185546b3f9e19debe6e8eae994b2de1aab1a184f'] Synching the system clock with the buildd NTP service... 18 Aug 17:10:48 ntpdate[19779]: adjust time server 10.211.37.1 offset 0.000883 sec Unpacking chroot for build b3bc89fe41cf989a0606b5b618913b759a917443 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', 'b3bc89fe41cf989a0606b5b618913b759a917443'] Mounting chroot for build b3bc89fe41cf989a0606b5b618913b759a917443 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', 'b3bc89fe41cf989a0606b5b618913b759a917443', 'deb http://ftpmaster.internal/ubuntu oneiric main universe'] Overriding sources.list in build-b3bc89fe41cf989a0606b5b618913b759a917443 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', 'b3bc89fe41cf989a0606b5b618913b759a917443', 'armel'] Updating debian chroot for build b3bc89fe41cf989a0606b5b618913b759a917443 Ign http://ftpmaster.internal oneiric InRelease Get:1 http://ftpmaster.internal oneiric Release.gpg [198 B] Get:2 http://ftpmaster.internal oneiric Release [39.8 kB] Get:3 http://ftpmaster.internal oneiric/main armel Packages [1605 kB] Get:4 http://ftpmaster.internal oneiric/universe armel Packages [6253 kB] Ign http://ftpmaster.internal oneiric/main TranslationIndex Ign http://ftpmaster.internal oneiric/universe TranslationIndex Fetched 7898 kB in 47s (166 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: libudev0 udev 2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 328 kB of archives. After this operation, 0 B of additional disk space will be used. WARNING: The following packages cannot be authenticated! libudev0 udev Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ oneiric/main libudev0 armel 173-0ubuntu2 [26.8 kB] Get:2 http://ftpmaster.internal/ubuntu/ oneiric/main udev armel 173-0ubuntu2 [301 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 328 kB in 0s (967 kB/s) (Reading database ... 13961 files and directories currently installed.) Preparing to replace libudev0 173-0ubuntu1 (using .../libudev0_173-0ubuntu2_armel.deb) ... Unpacking replacement libudev0 ... Preparing to replace udev 173-0ubuntu1 (using .../udev_173-0ubuntu2_armel.deb) ... Adding 'diversion of /sbin/udevadm to /sbin/udevadm.upgrade by fake-udev' Unpacking replacement udev ... Setting up libudev0 (173-0ubuntu2) ... Setting up udev (173-0ubuntu2) ... Removing 'diversion of /sbin/udevadm to /sbin/udevadm.upgrade by fake-udev' update-initramfs: deferring update (trigger activated) Processing triggers for libc-bin ... ldconfig deferred processing now taking place Processing triggers for initramfs-tools ... RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', 'b3bc89fe41cf989a0606b5b618913b759a917443', 'armel', 'oneiric', '--nolog', '--batch', '--archive=ubuntu', '--dist=oneiric', '--purpose=PRIMARY', '--architecture=armel', '--comp=universe', 'motion_3.2.12-2ubuntu1.dsc'] Initiating build b3bc89fe41cf989a0606b5b618913b759a917443 with 0 processor cores. Automatic build of motion_3.2.12-2ubuntu1 on genip by sbuild/armel 1.170.5 Build started at 20110818-1714 ****************************************************************************** motion_3.2.12-2ubuntu1.dsc exists in cwd sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 6), autotools-dev, libjpeg62-dev, zlib1g-dev, libavcodec-dev, libavformat-dev, libpq-dev, libmysqlclient-dev, libv4l-dev sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) Checking for already installed source dependencies... debhelper: missing autotools-dev: missing libjpeg62-dev: missing zlib1g-dev: missing libavcodec-dev: missing libavformat-dev: missing libpq-dev: missing libmysqlclient-dev: missing libv4l-dev: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper autotools-dev libjpeg62-dev zlib1g-dev libavcodec-dev libavformat-dev libpq-dev libmysqlclient-dev libv4l-dev Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils comerr-dev file gettext gettext-base groff-base html2text intltool-debian krb5-multidev libavcodec53 libavformat53 libavutil-dev libavutil51 libcroco3 libgsm1 libgssrpc4 libjack-jackd2-0 libjpeg62 libkadm5clnt-mit8 libkadm5srv-mit8 libkdb5-5 libkrb5-dev libmagic1 libmysqlclient16 libogg0 liborc-0.4-0 libpipeline1 libpq5 libschroedinger-1.0-0 libspeex1 libssl-dev libtheora0 libunistring0 libv4l-0 libva1 libvorbis0a libvorbisenc2 libvpx0 libxml2 man-db mysql-common po-debconf Suggested packages: wamerican wordlist whois vacation doc-base dh-make gettext-doc groff krb5-doc libfaad-dev libgsm1-dev libogg-dev libschroedinger-dev libspeex-dev libtheora-dev libvorbis-dev libx11-dev libxext-dev libraw1394-dev libdc1394-22-dev krb5-user jackd2 postgresql-doc-9.0 speex pkg-config less www-browser libmail-box-perl Recommended packages: curl wget lynx-cur libssl-doc xml-core libmail-sendmail-perl The following NEW packages will be installed: autotools-dev bsdmainutils comerr-dev debhelper file gettext gettext-base groff-base html2text intltool-debian krb5-multidev libavcodec-dev libavcodec53 libavformat-dev libavformat53 libavutil-dev libavutil51 libcroco3 libgsm1 libgssrpc4 libjack-jackd2-0 libjpeg62 libjpeg62-dev libkadm5clnt-mit8 libkadm5srv-mit8 libkdb5-5 libkrb5-dev libmagic1 libmysqlclient-dev libmysqlclient16 libogg0 liborc-0.4-0 libpipeline1 libpq-dev libpq5 libschroedinger-1.0-0 libspeex1 libssl-dev libtheora0 libunistring0 libv4l-0 libv4l-dev libva1 libvorbis0a libvorbisenc2 libvpx0 libxml2 man-db mysql-common po-debconf zlib1g-dev 0 upgraded, 51 newly installed, 0 to remove and 0 not upgraded. Need to get 24.1 MB of archives. After this operation, 63.9 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libpipeline1 libgssrpc4 libkadm5clnt-mit8 libkdb5-5 libkadm5srv-mit8 libogg0 libspeex1 libjpeg62 libv4l-0 libvorbis0a libvorbisenc2 libmagic1 file bsdmainutils gettext-base groff-base libxml2 man-db autotools-dev html2text libcroco3 libunistring0 gettext intltool-debian po-debconf debhelper comerr-dev krb5-multidev libjack-jackd2-0 libavutil51 libgsm1 liborc-0.4-0 libschroedinger-1.0-0 libtheora0 libva1 libvpx0 libavcodec53 libavutil-dev libavcodec-dev libavformat53 libavformat-dev libjpeg62-dev mysql-common libmysqlclient16 zlib1g-dev libmysqlclient-dev libpq5 libssl-dev libkrb5-dev libpq-dev libv4l-dev Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ oneiric/main libpipeline1 armel 1.2.0-3 [20.6 kB] Get:2 http://ftpmaster.internal/ubuntu/ oneiric/main libgssrpc4 armel 1.9.1+dfsg-1ubuntu1 [50.4 kB] Get:3 http://ftpmaster.internal/ubuntu/ oneiric/main libkadm5clnt-mit8 armel 1.9.1+dfsg-1ubuntu1 [31.4 kB] Get:4 http://ftpmaster.internal/ubuntu/ oneiric/main libkdb5-5 armel 1.9.1+dfsg-1ubuntu1 [29.1 kB] Get:5 http://ftpmaster.internal/ubuntu/ oneiric/main libkadm5srv-mit8 armel 1.9.1+dfsg-1ubuntu1 [43.2 kB] Get:6 http://ftpmaster.internal/ubuntu/ oneiric/main libogg0 armel 1.2.2~dfsg-1ubuntu1 [14.0 kB] Get:7 http://ftpmaster.internal/ubuntu/ oneiric/main libspeex1 armel 1.2~rc1-1ubuntu2 [49.6 kB] Get:8 http://ftpmaster.internal/ubuntu/ oneiric/main libjpeg62 armel 6b1-1ubuntu2 [72.9 kB] Get:9 http://ftpmaster.internal/ubuntu/ oneiric/main libv4l-0 armel 0.8.5-1ubuntu1 [97.7 kB] Get:10 http://ftpmaster.internal/ubuntu/ oneiric/main libvorbis0a armel 1.3.2-1ubuntu2 [92.7 kB] Get:11 http://ftpmaster.internal/ubuntu/ oneiric/main libvorbisenc2 armel 1.3.2-1ubuntu2 [114 kB] Get:12 http://ftpmaster.internal/ubuntu/ oneiric/main libmagic1 armel 5.04-5ubuntu3 [199 kB] Get:13 http://ftpmaster.internal/ubuntu/ oneiric/main file armel 5.04-5ubuntu3 [19.5 kB] Get:14 http://ftpmaster.internal/ubuntu/ oneiric/main bsdmainutils armel 8.2.3 [194 kB] Get:15 http://ftpmaster.internal/ubuntu/ oneiric/main gettext-base armel 0.18.1.1-3ubuntu1 [56.1 kB] Get:16 http://ftpmaster.internal/ubuntu/ oneiric/main groff-base armel 1.21-6 [934 kB] Get:17 http://ftpmaster.internal/ubuntu/ oneiric/main libxml2 armel 2.7.8.dfsg-4 [559 kB] Get:18 http://ftpmaster.internal/ubuntu/ oneiric/main man-db armel 2.6.0.2-2 [675 kB] Get:19 http://ftpmaster.internal/ubuntu/ oneiric/main autotools-dev all 20110511.1 [44.7 kB] Get:20 http://ftpmaster.internal/ubuntu/ oneiric/main html2text armel 1.3.2a-15 [94.3 kB] Get:21 http://ftpmaster.internal/ubuntu/ oneiric/main libcroco3 armel 0.6.2-1 [89.5 kB] Get:22 http://ftpmaster.internal/ubuntu/ oneiric/main libunistring0 armel 0.9.3-4 [394 kB] Get:23 http://ftpmaster.internal/ubuntu/ oneiric/main gettext armel 0.18.1.1-3ubuntu1 [1156 kB] Get:24 http://ftpmaster.internal/ubuntu/ oneiric/main intltool-debian all 0.35.0+20060710.1 [31.6 kB] Get:25 http://ftpmaster.internal/ubuntu/ oneiric/main po-debconf all 1.0.16+nmu1 [212 kB] Get:26 http://ftpmaster.internal/ubuntu/ oneiric/main debhelper all 8.9.0ubuntu1 [487 kB] Get:27 http://ftpmaster.internal/ubuntu/ oneiric/main comerr-dev armel 2.1-1.41.14-1ubuntu3 [42.4 kB] Get:28 http://ftpmaster.internal/ubuntu/ oneiric/main krb5-multidev armel 1.9.1+dfsg-1ubuntu1 [90.8 kB] Get:29 http://ftpmaster.internal/ubuntu/ oneiric/main libjack-jackd2-0 armel 1.9.7~dfsg-1ubuntu1 [97.0 kB] Get:30 http://ftpmaster.internal/ubuntu/ oneiric/main libavutil51 armel 4:0.7.1-1ubuntu2 [116 kB] Get:31 http://ftpmaster.internal/ubuntu/ oneiric/main libgsm1 armel 1.0.13-3 [33.5 kB] Get:32 http://ftpmaster.internal/ubuntu/ oneiric/main liborc-0.4-0 armel 1:0.4.14-1 [153 kB] Get:33 http://ftpmaster.internal/ubuntu/ oneiric/main libschroedinger-1.0-0 armel 1.0.10-2.1 [244 kB] Get:34 http://ftpmaster.internal/ubuntu/ oneiric/main libtheora0 armel 1.1.1+dfsg.1-3 [367 kB] Get:35 http://ftpmaster.internal/ubuntu/ oneiric/main libva1 armel 1.0.12-2 [32.6 kB] Get:36 http://ftpmaster.internal/ubuntu/ oneiric/main libvpx0 armel 0.9.6-1 [216 kB] Get:37 http://ftpmaster.internal/ubuntu/ oneiric/main libavcodec53 armel 4:0.7.1-1ubuntu2 [5568 kB] Get:38 http://ftpmaster.internal/ubuntu/ oneiric/main libavutil-dev armel 4:0.7.1-1ubuntu2 [95.0 kB] Get:39 http://ftpmaster.internal/ubuntu/ oneiric/main libavcodec-dev armel 4:0.7.1-1ubuntu2 [3170 kB] Get:40 http://ftpmaster.internal/ubuntu/ oneiric/main libavformat53 armel 4:0.7.1-1ubuntu2 [896 kB] Get:41 http://ftpmaster.internal/ubuntu/ oneiric/main libavformat-dev armel 4:0.7.1-1ubuntu2 [616 kB] Get:42 http://ftpmaster.internal/ubuntu/ oneiric/main libjpeg62-dev armel 6b1-1ubuntu2 [176 kB] Get:43 http://ftpmaster.internal/ubuntu/ oneiric/main mysql-common all 5.1.58-1ubuntu1 [11.6 kB] Get:44 http://ftpmaster.internal/ubuntu/ oneiric/main libmysqlclient16 armel 5.1.58-1ubuntu1 [1702 kB] Get:45 http://ftpmaster.internal/ubuntu/ oneiric/main zlib1g-dev armel 1:1.2.3.4.dfsg-3ubuntu3 [161 kB] Get:46 http://ftpmaster.internal/ubuntu/ oneiric/main libmysqlclient-dev armel 5.1.58-1ubuntu1 [2975 kB] Get:47 http://ftpmaster.internal/ubuntu/ oneiric/main libpq5 armel 9.0.4-1build1 [70.4 kB] Get:48 http://ftpmaster.internal/ubuntu/ oneiric/main libssl-dev armel 1.0.0d-2ubuntu2 [1219 kB] Get:49 http://ftpmaster.internal/ubuntu/ oneiric/main libkrb5-dev armel 1.9.1+dfsg-1ubuntu1 [12.4 kB] Get:50 http://ftpmaster.internal/ubuntu/ oneiric/main libpq-dev armel 9.0.4-1build1 [186 kB] Get:51 http://ftpmaster.internal/ubuntu/ oneiric/main libv4l-dev armel 0.8.5-1ubuntu1 [87.2 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 24.1 MB in 8s (2995 kB/s) Selecting previously deselected package libpipeline1. (Reading database ... 13961 files and directories currently installed.) Unpacking libpipeline1 (from .../libpipeline1_1.2.0-3_armel.deb) ... Selecting previously deselected package libgssrpc4. Unpacking libgssrpc4 (from .../libgssrpc4_1.9.1+dfsg-1ubuntu1_armel.deb) ... Selecting previously deselected package libkadm5clnt-mit8. Unpacking libkadm5clnt-mit8 (from .../libkadm5clnt-mit8_1.9.1+dfsg-1ubuntu1_armel.deb) ... Selecting previously deselected package libkdb5-5. Unpacking libkdb5-5 (from .../libkdb5-5_1.9.1+dfsg-1ubuntu1_armel.deb) ... Selecting previously deselected package libkadm5srv-mit8. Unpacking libkadm5srv-mit8 (from .../libkadm5srv-mit8_1.9.1+dfsg-1ubuntu1_armel.deb) ... Selecting previously deselected package libogg0. Unpacking libogg0 (from .../libogg0_1.2.2~dfsg-1ubuntu1_armel.deb) ... Selecting previously deselected package libspeex1. Unpacking libspeex1 (from .../libspeex1_1.2~rc1-1ubuntu2_armel.deb) ... Selecting previously deselected package libjpeg62. Unpacking libjpeg62 (from .../libjpeg62_6b1-1ubuntu2_armel.deb) ... Selecting previously deselected package libv4l-0. Unpacking libv4l-0 (from .../libv4l-0_0.8.5-1ubuntu1_armel.deb) ... Selecting previously deselected package libvorbis0a. Unpacking libvorbis0a (from .../libvorbis0a_1.3.2-1ubuntu2_armel.deb) ... Selecting previously deselected package libvorbisenc2. Unpacking libvorbisenc2 (from .../libvorbisenc2_1.3.2-1ubuntu2_armel.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_5.04-5ubuntu3_armel.deb) ... Selecting previously deselected package file. Unpacking file (from .../file_5.04-5ubuntu3_armel.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.2.3_armel.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.18.1.1-3ubuntu1_armel.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.21-6_armel.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.8.dfsg-4_armel.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.6.0.2-2_armel.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20110511.1_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-15_armel.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_armel.deb) ... Selecting previously deselected package libunistring0. Unpacking libunistring0 (from .../libunistring0_0.9.3-4_armel.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.18.1.1-3ubuntu1_armel.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16+nmu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_8.9.0ubuntu1_all.deb) ... Selecting previously deselected package comerr-dev. Unpacking comerr-dev (from .../comerr-dev_2.1-1.41.14-1ubuntu3_armel.deb) ... Selecting previously deselected package krb5-multidev. Unpacking krb5-multidev (from .../krb5-multidev_1.9.1+dfsg-1ubuntu1_armel.deb) ... Selecting previously deselected package libjack-jackd2-0. Unpacking libjack-jackd2-0 (from .../libjack-jackd2-0_1.9.7~dfsg-1ubuntu1_armel.deb) ... Selecting previously deselected package libavutil51. Unpacking libavutil51 (from .../libavutil51_4%3a0.7.1-1ubuntu2_armel.deb) ... Selecting previously deselected package libgsm1. Unpacking libgsm1 (from .../libgsm1_1.0.13-3_armel.deb) ... Selecting previously deselected package liborc-0.4-0. Unpacking liborc-0.4-0 (from .../liborc-0.4-0_1%3a0.4.14-1_armel.deb) ... Selecting previously deselected package libschroedinger-1.0-0. Unpacking libschroedinger-1.0-0 (from .../libschroedinger-1.0-0_1.0.10-2.1_armel.deb) ... Selecting previously deselected package libtheora0. Unpacking libtheora0 (from .../libtheora0_1.1.1+dfsg.1-3_armel.deb) ... Selecting previously deselected package libva1. Unpacking libva1 (from .../libva1_1.0.12-2_armel.deb) ... Selecting previously deselected package libvpx0. Unpacking libvpx0 (from .../libvpx0_0.9.6-1_armel.deb) ... Selecting previously deselected package libavcodec53. Unpacking libavcodec53 (from .../libavcodec53_4%3a0.7.1-1ubuntu2_armel.deb) ... Selecting previously deselected package libavutil-dev. Unpacking libavutil-dev (from .../libavutil-dev_4%3a0.7.1-1ubuntu2_armel.deb) ... Selecting previously deselected package libavcodec-dev. Unpacking libavcodec-dev (from .../libavcodec-dev_4%3a0.7.1-1ubuntu2_armel.deb) ... Selecting previously deselected package libavformat53. Unpacking libavformat53 (from .../libavformat53_4%3a0.7.1-1ubuntu2_armel.deb) ... Selecting previously deselected package libavformat-dev. Unpacking libavformat-dev (from .../libavformat-dev_4%3a0.7.1-1ubuntu2_armel.deb) ... Selecting previously deselected package libjpeg62-dev. Unpacking libjpeg62-dev (from .../libjpeg62-dev_6b1-1ubuntu2_armel.deb) ... Selecting previously deselected package mysql-common. Unpacking mysql-common (from .../mysql-common_5.1.58-1ubuntu1_all.deb) ... Selecting previously deselected package libmysqlclient16. Unpacking libmysqlclient16 (from .../libmysqlclient16_5.1.58-1ubuntu1_armel.deb) ... Selecting previously deselected package zlib1g-dev. Unpacking zlib1g-dev (from .../zlib1g-dev_1%3a1.2.3.4.dfsg-3ubuntu3_armel.deb) ... Selecting previously deselected package libmysqlclient-dev. Unpacking libmysqlclient-dev (from .../libmysqlclient-dev_5.1.58-1ubuntu1_armel.deb) ... Selecting previously deselected package libpq5. Unpacking libpq5 (from .../libpq5_9.0.4-1build1_armel.deb) ... Selecting previously deselected package libssl-dev. Unpacking libssl-dev (from .../libssl-dev_1.0.0d-2ubuntu2_armel.deb) ... Selecting previously deselected package libkrb5-dev. Unpacking libkrb5-dev (from .../libkrb5-dev_1.9.1+dfsg-1ubuntu1_armel.deb) ... Selecting previously deselected package libpq-dev. Unpacking libpq-dev (from .../libpq-dev_9.0.4-1build1_armel.deb) ... Selecting previously deselected package libv4l-dev. Unpacking libv4l-dev (from .../libv4l-dev_0.8.5-1ubuntu1_armel.deb) ... Setting up libpipeline1 (1.2.0-3) ... Setting up libgssrpc4 (1.9.1+dfsg-1ubuntu1) ... Setting up libkadm5clnt-mit8 (1.9.1+dfsg-1ubuntu1) ... Setting up libkdb5-5 (1.9.1+dfsg-1ubuntu1) ... Setting up libkadm5srv-mit8 (1.9.1+dfsg-1ubuntu1) ... Setting up libogg0 (1.2.2~dfsg-1ubuntu1) ... Setting up libspeex1 (1.2~rc1-1ubuntu2) ... Setting up libjpeg62 (6b1-1ubuntu2) ... Setting up libv4l-0 (0.8.5-1ubuntu1) ... Setting up libvorbis0a (1.3.2-1ubuntu2) ... Setting up libvorbisenc2 (1.3.2-1ubuntu2) ... Setting up libmagic1 (5.04-5ubuntu3) ... Setting up file (5.04-5ubuntu3) ... Setting up bsdmainutils (8.2.3) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode. Setting up gettext-base (0.18.1.1-3ubuntu1) ... Setting up groff-base (1.21-6) ... Setting up libxml2 (2.7.8.dfsg-4) ... Setting up man-db (2.6.0.2-2) ... Building database of manual pages ... Setting up autotools-dev (20110511.1) ... Setting up html2text (1.3.2a-15) ... Setting up libcroco3 (0.6.2-1) ... Setting up libunistring0 (0.9.3-4) ... Setting up gettext (0.18.1.1-3ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16+nmu1) ... Setting up debhelper (8.9.0ubuntu1) ... Setting up comerr-dev (2.1-1.41.14-1ubuntu3) ... Setting up krb5-multidev (1.9.1+dfsg-1ubuntu1) ... Setting up libjack-jackd2-0 (1.9.7~dfsg-1ubuntu1) ... Setting up libavutil51 (4:0.7.1-1ubuntu2) ... Setting up libgsm1 (1.0.13-3) ... Setting up liborc-0.4-0 (1:0.4.14-1) ... Setting up libschroedinger-1.0-0 (1.0.10-2.1) ... Setting up libtheora0 (1.1.1+dfsg.1-3) ... Setting up libva1 (1.0.12-2) ... Setting up libvpx0 (0.9.6-1) ... Setting up libavcodec53 (4:0.7.1-1ubuntu2) ... Setting up libavutil-dev (4:0.7.1-1ubuntu2) ... Setting up libavcodec-dev (4:0.7.1-1ubuntu2) ... Setting up libavformat53 (4:0.7.1-1ubuntu2) ... Setting up libavformat-dev (4:0.7.1-1ubuntu2) ... Setting up libjpeg62-dev (6b1-1ubuntu2) ... Setting up mysql-common (5.1.58-1ubuntu1) ... Setting up libmysqlclient16 (5.1.58-1ubuntu1) ... Setting up zlib1g-dev (1:1.2.3.4.dfsg-3ubuntu3) ... Setting up libmysqlclient-dev (5.1.58-1ubuntu1) ... Setting up libpq5 (9.0.4-1build1) ... Setting up libssl-dev (1.0.0d-2ubuntu2) ... Setting up libkrb5-dev (1.9.1+dfsg-1ubuntu1) ... Setting up libpq-dev (9.0.4-1build1) ... Setting up libv4l-dev (0.8.5-1ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.13-16ubuntu4 make_3.81-8.1ubuntu1 dpkg-dev_1.16.0.3ubuntu3 gcc-4.6_4.6.1-7ubuntu1 g++-4.6_4.6.1-7ubuntu1 binutils_2.21.53.20110810-0ubuntu1 libstdc++6_4.6.1-7ubuntu1 libstdc++6-4.6-dev_4.6.1-7ubuntu1 ------------------------------------------------------------------------------ dpkg-source: warning: -sn is not a valid option for Dpkg::Source::Package::V3::quilt gpgv: Signature made Thu Aug 18 17:06:42 2011 UTC using RSA key ID 7D86500B gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./motion_3.2.12-2ubuntu1.dsc dpkg-source: info: extracting motion in motion-3.2.12 dpkg-source: info: unpacking motion_3.2.12.orig.tar.gz dpkg-source: info: unpacking motion_3.2.12-2ubuntu1.debian.tar.gz dpkg-source: info: applying libav-api.patch dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package motion dpkg-buildpackage: source version 3.2.12-2ubuntu1 dpkg-source --before-build motion-3.2.12 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp [ ! -f Makefile ] || /usr/bin/make distclean rm -f config.sub config.guess config.log config.status dh_clean debian/rules build dh_testdir cp -f /usr/share/misc/config.guess config.guess cp -f /usr/share/misc/config.sub config.sub # Add here commands to configure the package. CFLAGS="-Wall -g -O2" LDFLAGS="-Wl,--as-needed" ./configure \ --prefix=/usr \ --bindir=\${prefix}/bin \ --build=arm-linux-gnueabi \ --host=arm-linux-gnueabi \ --datadir=\${prefix}/share \ --mandir=\${datadir}/man \ --infodir=\${datadir}/info \ --sysconfdir=/etc/motion \ --with-ffmpeg \ --with-mysql \ --with-pgsql \ --without-optimizecpu \ --without-jpeg-mmx checking for Darwin... no checking for *BSD... no checking for arm-linux-gnueabi-gcc... arm-linux-gnueabi-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-linux-gnueabi-gcc accepts -g... yes checking for arm-linux-gnueabi-gcc option to accept ISO C89... none needed checking threads... yes checking for libjpeg-mmx... skipping checking for libjpeg... checking for jpeg_set_defaults in -ljpeg... yes checking for ffmpeg autodetecting... found in /usr/lib checking for ffmpeg headers in /usr... found /usr/include/libavformat/avformat.h checking file_protocol is defined in ffmpeg ?... no checking for mysql support... testing checking autodect mysql headers... yes checking autodect mysql libs... /usr/lib checking for mysql_init in -lmysqlclient... yes checking for PostgreSQL... testing checking autodect pgsql headers... yes /usr/include/postgresql checking autodect pgsql libs... /usr/lib checking for PQconnectStart in -lpq... yes checking how to run the C preprocessor... arm-linux-gnueabi-gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking for unistd.h... (cached) yes checking for stdint.h... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/mman.h usability... yes checking sys/mman.h presence... yes checking for sys/mman.h... yes checking linux/videodev.h usability... no checking linux/videodev.h presence... no checking for linux/videodev.h... no checking linux/videodev2.h usability... yes checking linux/videodev2.h presence... yes checking for linux/videodev2.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking for sys/types.h... (cached) yes checking for get_current_dir_name... yes checking for struct v4l2_buffer... no checking for V42L support... no checking for V42L *old* support... testing checking for linux/videodev2.h... (cached) yes checking size of short... 2 checking size of int... 4 checking size of long int... 4 checking size of long long... 8 checking size of int *... 4 checking size of void *... 4 checking for an ANSI C-conforming const... yes checking for bswap instruction... yes configure: creating ./config.status config.status: creating thread1.conf config.status: creating thread2.conf config.status: creating thread3.conf config.status: creating thread4.conf config.status: creating motion-dist.conf config.status: creating motion.init-FreeBSD.sh config.status: creating motion.init-Debian config.status: creating motion.init-Fedora config.status: creating motion.spec config.status: creating Makefile config.status: creating config.h ******************************* Configure status motion 3.2.12 ******************************* OS : Linux pthread Support: Yes jpeg Support: Yes V4L included: Yes V4L2 supported: Yes FFmpeg Support: Yes MYSQL Support: Yes PostgreSQL Support: Yes CFLAGS: -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP LIBS: -lm -lpthread -ljpeg -L/usr/lib -lavformat -lavcodec -lavutil -lm -lz -L/usr/lib -lmysqlclient -lz -L/usr/lib -lpq LDFLAGS: -Wl,--as-needed -L/usr/lib Install prefix: /usr touch configure-stamp dh_testdir /usr/bin/make make[1]: Entering directory `/build/buildd/motion-3.2.12' Welcome to the setup procedure for Motion, the motion detection daemon! If you get error messages during this procedure, please report them to the mailing list. The Motion Guide contains all information you should need to get Motion up and running. Run "make updateguide" to download the latest version of the Motion Guide. Version: 3.2.12 Platform: Linux (if this is incorrect, please read README.FreeBSD) Generating dependencies, please wait... Compiling Motion object files... -------------------------------------------------------------------------------- arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o motion.o motion.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o conf.o conf.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o draw.o draw.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o jpegutils.o jpegutils.c jpegutils.c: In function 'decode_jpeg_gray_raw': jpegutils.c:777:20: warning: variable 'hsf' set but not used [-Wunused-but-set-variable] arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o video.o video.c video.c: In function 'v4l_open_vidpipe': video.c:445:15: warning: variable 'ostatus' set but not used [-Wunused-but-set-variable] video.c:441:15: warning: variable 'loop' set but not used [-Wunused-but-set-variable] arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o video2.o video2.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o video_common.o video_common.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o netcam.o netcam.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o netcam_ftp.o netcam_ftp.c netcam_ftp.c: In function 'ftp_send_type': netcam_ftp.c:813:20: warning: variable 'utype' set but not used [-Wunused-but-set-variable] arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o netcam_jpeg.o netcam_jpeg.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o netcam_wget.o netcam_wget.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o track.o track.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o alg.o alg.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o event.o event.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o picture.o picture.c picture.c: In function 'put_ppm_bgr24_file': picture.c:332:9: warning: variable 'warningkiller' set but not used [-Wunused-but-set-variable] arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o rotate.o rotate.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o webhttpd.o webhttpd.c webhttpd.c: In function 'send_template_raw': webhttpd.c:218:13: warning: variable 'nwrite' set but not used [-Wunused-but-set-variable] webhttpd.c: In function 'send_template_end_client': webhttpd.c:224:13: warning: variable 'nwrite' set but not used [-Wunused-but-set-variable] webhttpd.c: In function 'response_client': webhttpd.c:230:13: warning: variable 'nwrite' set but not used [-Wunused-but-set-variable] arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o webcam.o webcam.c arm-linux-gnueabi-gcc -Wall -g -O2 -D_REENTRANT -DHAVE_FFMPEG -I/usr/include -DFFMPEG_NEW_INCLUDES -DHAVE_FFMPEG_NEW -I/usr/include/mysql -I/usr/include/postgresql -DMOTION_V4L2 -DMOTION_V4L2_OLD -DTYPE_32BIT="int" -DHAVE_BSWAP -Wall -DVERSION=\"3.2.12\" -Dsysconfdir=\"/etc/motion\" -c -o ffmpeg.o ffmpeg.c ffmpeg.c:26:10: warning: #warning ************************************************** [-Wcpp] ffmpeg.c:27:10: warning: #warning Your version of FFmpeg is newer than version 0.4.8 [-Wcpp] ffmpeg.c:28:10: warning: #warning Newer versions of ffmpeg do not support MPEG1 with [-Wcpp] ffmpeg.c:29:10: warning: #warning non-standard framerate. MPEG1 will be disabled for [-Wcpp] ffmpeg.c:30:10: warning: #warning normal video output. You can still use mpeg4 and [-Wcpp] ffmpeg.c:31:10: warning: #warning and mpeg4ms which are both better in terms of size [-Wcpp] ffmpeg.c:32:10: warning: #warning and quality. MPEG1 is always used for timelapse. [-Wcpp] ffmpeg.c:33:10: warning: #warning Please read the Motion Guide for more information. [-Wcpp] ffmpeg.c:34:10: warning: #warning Note that this is not an error message! [-Wcpp] ffmpeg.c:35:10: warning: #warning ************************************************** [-Wcpp] ffmpeg.c:183:5: warning: initialization from incompatible pointer type [enabled by default] ffmpeg.c:183:5: warning: (near initialization for 'file_protocol.url_write') [enabled by default] ffmpeg.c: In function 'mpeg1_write_trailer': ffmpeg.c:202:5: warning: 'put_buffer' is deprecated (declared at /usr/include/libavformat/avio.h:255) [-Wdeprecated-declarations] ffmpeg.c:203:5: warning: 'put_flush_packet' is deprecated (declared at /usr/include/libavformat/avio.h:292) [-Wdeprecated-declarations] ffmpeg.c: In function 'ffmpeg_init': ffmpeg.c:232:5: warning: 'av_register_protocol2' is deprecated (declared at /usr/include/libavformat/avio.h:211) [-Wdeprecated-declarations] ffmpeg.c: In function 'ffmpeg_open': ffmpeg.c:420:5: warning: 'av_set_parameters' is deprecated (declared at /usr/include/libavformat/avformat.h:1336) [-Wdeprecated-declarations] ffmpeg.c:501:9: warning: 'url_fopen' is deprecated (declared at /usr/include/libavformat/avio.h:278) [-Wdeprecated-declarations] ffmpeg.c:511:17: warning: 'url_fopen' is deprecated (declared at /usr/include/libavformat/avio.h:278) [-Wdeprecated-declarations] ffmpeg.c:532:5: warning: 'av_write_header' is deprecated (declared at /usr/include/libavformat/avformat.h:1394) [-Wdeprecated-declarations] ffmpeg.c: In function 'ffmpeg_close': ffmpeg.c:599:9: warning: 'url_fclose' is deprecated (declared at /usr/include/libavformat/avio.h:279) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- Motion object files compiled. Linking Motion... -------------------------------------------------------------------------------- arm-linux-gnueabi-gcc -Wl,--as-needed -L/usr/lib -o motion motion.o conf.o draw.o jpegutils.o video.o video2.o video_common.o netcam.o netcam_ftp.o netcam_jpeg.o netcam_wget.o track.o alg.o event.o picture.o rotate.o webhttpd.o webcam.o ffmpeg.o -lm -lpthread -ljpeg -L/usr/lib -lavformat -lavcodec -lavutil -lm -lz -L/usr/lib -lmysqlclient -lz -L/usr/lib -lpq -------------------------------------------------------------------------------- Motion has been linked. Build complete, run "make install" to install Motion! make[1]: Leaving directory `/build/buildd/motion-3.2.12' touch build-stamp /usr/bin/fakeroot debian/rules binary-arch dh_testdir dh_testroot dh_clean -k dh_clean: dh_clean -k is deprecated; use dh_prep instead dh_installdirs # Add here commands to install the package into debian/motion. /usr/bin/make install DESTDIR=/build/buildd/motion-3.2.12/debian/motion make[1]: Entering directory `/build/buildd/motion-3.2.12' Installing files... -------------------------------------------------------------------------------- mkdir -p /build/buildd/motion-3.2.12/debian/motion/usr/bin mkdir -p /build/buildd/motion-3.2.12/debian/motion/usr/share/man/man1 mkdir -p /build/buildd/motion-3.2.12/debian/motion/etc/motion mkdir -p /build/buildd/motion-3.2.12/debian/motion/usr/share/doc/motion-3.2.12 mkdir -p /build/buildd/motion-3.2.12/debian/motion/usr/share/motion-3.2.12/examples install motion.1 /build/buildd/motion-3.2.12/debian/motion/usr/share/man/man1 install CHANGELOG COPYING CREDITS INSTALL README motion_guide.html /build/buildd/motion-3.2.12/debian/motion/usr/share/doc/motion-3.2.12 install *.conf motion.init-Debian motion.init-Fedora motion.init-FreeBSD.sh /build/buildd/motion-3.2.12/debian/motion/usr/share/motion-3.2.12/examples install motion-dist.conf /build/buildd/motion-3.2.12/debian/motion/etc/motion for prog in motion; \ do \ (install $prog /build/buildd/motion-3.2.12/debian/motion/usr/bin ); \ done -------------------------------------------------------------------------------- Install complete! The default configuration file, motion-dist.conf, has been installed to /etc/motion. You need to rename/copy it to /etc/motion/motion.conf for Motion to find it. More configuration examples as well as init scripts can be found in /usr/share/motion-3.2.12/examples. make[1]: Leaving directory `/build/buildd/motion-3.2.12' # Offer a minimal default config file. cp thread*.conf debian/motion/etc/motion cp debian/NEWS debian/motion/usr/share/doc/motion # Remove unwanted/misplaced files. rm -rf /build/buildd/motion-3.2.12/debian/motion/usr/share/doc/motion* rm -f /build/buildd/motion-3.2.12/debian/motion/etc/motion/motion-dist.conf # Fix mode Daemon cat /build/buildd/motion-3.2.12/motion-dist.conf | sed 's/^daemon on/daemon off/g' > motion.conf mv motion.conf /build/buildd/motion-3.2.12/debian/motion/etc/motion/motion.conf # Fix path directory for pictures and films cat /build/buildd/motion-3.2.12/debian/motion/etc/motion/motion.conf | sed 's/target_dir \/usr\/local\/apache2\/htdocs\/cam1/target_dir \/tmp\/motion/g' > motion.conf mv motion.conf /build/buildd/motion-3.2.12/debian/motion/etc/motion/motion.conf # Fix default format encoding cat /build/buildd/motion-3.2.12/debian/motion/etc/motion/motion.conf | sed 's/^ffmpeg_video_codec mpeg4/ffmpeg_video_codec swf/g' > motion.conf mv motion.conf /build/buildd/motion-3.2.12/debian/motion/etc/motion/motion.conf # Remove dir/files unnecessary rm -rf /build/buildd/motion-3.2.12/debian/motion/usr/share/motion-3.2.12 dh_testdir dh_testroot dh_installchangelogs CHANGELOG dh_installdocs dh_installinit --init-script=motion \ --update-rcd-params='start 60 2 3 4 5 . stop 60 0 1 6 .' dh_installman debian/motion.1 dh_installdebconf dh_link dh_strip dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: motion dh_strip debug symbol extraction: packages to act on: motion dh_strip debug symbol extraction: ignored packages: dpkg-deb: warning: '/build/buildd/motion-3.2.12/debian/motion-dbgsym/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `motion-dbgsym' in `../motion-dbgsym_3.2.12-2ubuntu1_armel.ddeb'. dh_compress dh_fixperms dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb INFO: pkgstriptranslations version 101 pkgstriptranslations: processing control file: ./debian/motion/DEBIAN/control, package motion, directory ./debian/motion pkgstriptranslations: motion does not contain translations, skipping pkgmaintainermangler: Not overriding Maintainer for domain lists.ubuntu.com pkgstripfiles: processing control file: debian/motion/DEBIAN/control, package motion, directory debian/motion .. removing usr/share/doc/motion/changelog.gz .. removing usr/share/doc/motion/CHANGELOG.gz pkgstripfiles: Truncating changelog to topmost ten records dpkg-deb: warning: 'debian/motion/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `motion' in `../motion_3.2.12-2ubuntu1_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../motion_3.2.12-2ubuntu1_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-source --after-build motion-3.2.12 dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20110818-1718 Publishing debug debs. chroot-autobuild/build/buildd/motion_3.2.12-2ubuntu1_armel.deb: new debian package, version 2.0. size 215596 bytes: control archive= 5909 bytes. 163 bytes, 7 lines conffiles 180 bytes, 12 lines * config #!/bin/sh 1302 bytes, 29 lines control 725 bytes, 11 lines md5sums 1129 bytes, 58 lines * postinst #!/bin/sh 616 bytes, 37 lines * postrm #!/bin/sh 626 bytes, 39 lines * prerm #!/bin/sh 9067 bytes, 67 lines templates Package: motion Version: 3.2.12-2ubuntu1 Architecture: armel Maintainer: Ubuntu Developers Installed-Size: 816 Depends: libavcodec53 (>= 4:0.7-1) | libavcodec-extra-53 (>= 4:0.7-1), libavformat53 (>= 4:0.7-1) | libavformat-extra-53 (>= 4:0.7-1), libavutil51 (>= 4:0.7-1) | libavutil-extra-51 (>= 4:0.7-1), libc6 (>= 2.11), libjpeg62 (>= 6b1), libmysqlclient16 (>= 5.1.50-1), libpq5 (>= 8.4~), debconf (>= 0.5) | debconf-2.0, adduser, debconf Recommends: ffmpeg Suggests: mysql-client, postgresql-client Section: graphics Priority: optional Homepage: http://motion.sf.net Description: V4L capture program supporting motion detection Motion is a program that monitors the video signal from one or more cameras and is able to detect if a significant part of the picture has changed. Or in other words, it can detect motion. . Motion is a command line based tool. It has no graphical user interface. Everything is setup either via the command line or via configuration files. . The output from motion can be: - jpg files - ppm format files - mpeg video sequences . Also, motion has its own minimalistic web server. Thus, you can access the webcam output from motion via a browser. Original-Maintainer: Juan Angulo Moreno chroot-autobuild/build/buildd/motion_3.2.12-2ubuntu1_armel.deb: drwxr-xr-x root/root 0 2011-08-18 17:18 ./ drwxr-xr-x root/root 0 2011-08-18 17:17 ./etc/ drwxr-xr-x root/root 0 2011-08-18 17:17 ./etc/default/ -rw-r--r-- root/root 67 2010-04-10 14:50 ./etc/default/motion drwxr-xr-x root/root 0 2011-08-18 17:17 ./etc/init.d/ -rwxr-xr-x root/root 2274 2010-08-09 20:58 ./etc/init.d/motion drwxr-xr-x root/root 0 2011-08-18 17:17 ./etc/motion/ -rw-r--r-- root/root 2625 2011-08-18 17:17 ./etc/motion/thread4.conf -rw-r--r-- root/root 2107 2011-08-18 17:17 ./etc/motion/thread2.conf -rw-r--r-- root/root 2110 2011-08-18 17:17 ./etc/motion/thread3.conf -rw-r--r-- root/root 23993 2011-08-18 17:17 ./etc/motion/motion.conf -rw-r--r-- root/root 2107 2011-08-18 17:17 ./etc/motion/thread1.conf drwxr-xr-x root/root 0 2011-08-18 17:17 ./usr/ drwxr-xr-x root/root 0 2011-08-18 17:17 ./usr/share/ drwxr-xr-x root/root 0 2011-08-18 17:17 ./usr/share/man/ drwxr-xr-x root/root 0 2011-08-18 17:18 ./usr/share/man/man1/ -rw-r--r-- root/root 9584 2011-08-18 17:18 ./usr/share/man/man1/motion.1.gz drwxr-xr-x root/root 0 2011-08-18 17:17 ./usr/share/doc/ drwxr-xr-x root/root 0 2011-08-18 17:18 ./usr/share/doc/motion/ -rw-r--r-- root/root 1032 2010-06-01 06:48 ./usr/share/doc/motion/FAQ -rw-r--r-- root/root 536 2010-04-10 14:50 ./usr/share/doc/motion/copyright -rw-r--r-- root/root 381 2010-04-10 14:50 ./usr/share/doc/motion/README.Debian -rw-r--r-- root/root 2487 2010-06-01 06:48 ./usr/share/doc/motion/README -rw-r--r-- root/root 273 2010-04-10 14:50 ./usr/share/doc/motion/NEWS.Debian.gz -rw-r--r-- root/root 1424 2011-08-18 17:18 ./usr/share/doc/motion/changelog.Debian.gz -rw-r--r-- root/root 24775 2010-06-01 06:48 ./usr/share/doc/motion/CREDITS.gz -rw-r--r-- root/root 577 2010-06-01 06:48 ./usr/share/doc/motion/README.axis_2100 -rw-r--r-- root/root 380503 2010-06-01 06:48 ./usr/share/doc/motion/motion_guide.html drwxr-xr-x root/root 0 2011-08-18 17:18 ./usr/bin/ -rwxr-xr-x root/root 161892 2011-08-18 17:18 ./usr/bin/motion motion_3.2.12-2ubuntu1_armel.changes: Format: 1.8 Date: Thu, 18 Aug 2011 18:03:26 +0100 Source: motion Binary: motion Architecture: armel Version: 3.2.12-2ubuntu1 Distribution: oneiric Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: Colin Watson Description: motion - V4L capture program supporting motion detection Launchpad-Bugs-Fixed: 756211 Changes: motion (3.2.12-2ubuntu1) oneiric; urgency=low . [ Daniel Polehn ] * Use linux/videodev2.h and libv4l1-videodev.h rather than linux/videodev.h (LP: #756211). * Update to current libav API. Checksums-Sha1: 4e6d5a5cb843350fe0679f720b7c3ced61e81871 215596 motion_3.2.12-2ubuntu1_armel.deb Checksums-Sha256: 5ad4c244850b2dd21daaa0633bb1462ea0cdc3d8b19fa23950a214bf44890f35 215596 motion_3.2.12-2ubuntu1_armel.deb Files: a9f5fba8cda5eceb1ec6321f583b0916 215596 graphics optional motion_3.2.12-2ubuntu1_armel.deb Original-Maintainer: Juan Angulo Moreno ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/motion-3.2.12 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge groff-base gettext file zlib1g-dev libogg0 libkadm5srv-mit8 libgsm1 libavcodec53 libpq-dev comerr-dev libavformat53 autotools-dev po-debconf libjack-jackd2-0 libvorbis0a libkrb5-dev libcroco3 libspeex1 libvorbisenc2 libxml2 libva1 libmysqlclient16 krb5-multidev libjpeg62 man-db libv4l-dev libpq5 libavutil-dev intltool-debian libschroedinger-1.0-0 libv4l-0 html2text libvpx0 libjpeg62-dev gettext-base debhelper libmysqlclient-dev libunistring0 libkdb5-5 liborc-0.4-0 libmagic1 libkadm5clnt-mit8 libpipeline1 libavcodec-dev libssl-dev bsdmainutils libavformat-dev libtheora0 libavutil51 libgssrpc4 mysql-common (Reading database ... 15772 files and directories currently installed.) Removing libpq-dev ... Removing autotools-dev ... Removing libkrb5-dev ... Removing krb5-multidev ... Removing libv4l-dev ... Removing libpq5 ... Purging configuration files for libpq5 ... Removing libv4l-0 ... Purging configuration files for libv4l-0 ... Removing libjpeg62-dev ... Removing debhelper ... Removing libmysqlclient-dev ... Removing libkadm5clnt-mit8 ... Purging configuration files for libkadm5clnt-mit8 ... Removing libssl-dev ... Removing libavformat-dev ... Removing file ... Removing zlib1g-dev ... Removing libkadm5srv-mit8 ... Purging configuration files for libkadm5srv-mit8 ... Removing comerr-dev ... Removing libavformat53 ... Purging configuration files for libavformat53 ... Removing po-debconf ... Removing libmysqlclient16 ... Purging configuration files for libmysqlclient16 ... Removing libjpeg62 ... Removing man-db ... Purging configuration files for man-db ... Removing catpages as well as /var/cache/man hierarchy. Removing intltool-debian ... Removing html2text ... Purging configuration files for html2text ... Removing libkdb5-5 ... Purging configuration files for libkdb5-5 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libpipeline1 ... Purging configuration files for libpipeline1 ... Removing libavcodec-dev ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing libgssrpc4 ... Purging configuration files for libgssrpc4 ... Removing mysql-common ... Purging configuration files for mysql-common ... Removing groff-base ... Purging configuration files for groff-base ... Removing gettext ... Removing libavcodec53 ... Purging configuration files for libavcodec53 ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libspeex1 ... Purging configuration files for libspeex1 ... Removing libvorbisenc2 ... Purging configuration files for libvorbisenc2 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libva1 ... Purging configuration files for libva1 ... Removing libavutil-dev ... Removing libschroedinger-1.0-0 ... Purging configuration files for libschroedinger-1.0-0 ... Removing libvpx0 ... Purging configuration files for libvpx0 ... Removing gettext-base ... Removing libunistring0 ... Purging configuration files for libunistring0 ... Removing liborc-0.4-0 ... Purging configuration files for liborc-0.4-0 ... Removing libtheora0 ... Purging configuration files for libtheora0 ... Removing libavutil51 ... Purging configuration files for libavutil51 ... Removing libgsm1 ... Purging configuration files for libgsm1 ... Removing libjack-jackd2-0 ... Purging configuration files for libjack-jackd2-0 ... Removing libvorbis0a ... Purging configuration files for libvorbis0a ... Removing libogg0 ... Purging configuration files for libogg0 ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20110818-1718 Build needed 00:02:37, 5680k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', 'b3bc89fe41cf989a0606b5b618913b759a917443'] Scanning for processes to kill in build /home/buildd/build-b3bc89fe41cf989a0606b5b618913b759a917443/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', 'b3bc89fe41cf989a0606b5b618913b759a917443'] Unmounting chroot for build b3bc89fe41cf989a0606b5b618913b759a917443... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', 'b3bc89fe41cf989a0606b5b618913b759a917443'] Removing build b3bc89fe41cf989a0606b5b618913b759a917443