Ubuntu
nut package

nut 2.7.4-5.1ubuntu1 source package in Ubuntu

Changelog

nut (2.7.4-5.1ubuntu1) bionic; urgency=medium

  * Merge with Debian unstable. Remaining changes:
    - remove Build-Depends on libpowerman0-dev
    - remove nut-powerman-pdu
      + debian/nut-powerman-pdu.{install,manpages}: dropped for now
    - debian/nut-{cgi,server}.postinst: fix 'adduser' logic to be
      unconditional, since adduser is guaranteed to be idempotent.
    - debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
      debian/rules: Install apport hooks for all top-level nut packages.
    - Disable systemd unit; it does not check nut.conf whether nut is
      configured, and thus fails to start (and the package install).  The
      init.d script works well enough for the time being.
    - debian/tests/test-nut.py: in the CVE_2012_2944 test, give nut at most
      + 5 seconds to shut down, instead of expecting it to be shut down
        immediately after sending the killall.
      + Additional indication on how to run tests for xenial+
    - debian/tests/control : Fix dep8 test failures:
       + Drop python-unit from dep8 dependencies since the python-test
         package has now been removed. The unittest module has shipped with
         Python since 2.1.
       + Add dep8 test dependency on python, since Python 2 is required and
         is not necessarily installed by default any more.
    - debian/libnutclient0.symbols: Correct symbols file for ppc64el.
    - fix cflags/ldflags mismatch (LP #1711092)
  * Drop:
    - udevd is called systemd-udevd (LP #1540008)
      [ Fixed in Debian 2.7.4-5.1 ]
    - d/libnutclient0.symbols: fix symbols in regard to gcc-7
      (LP #1711091)
      [ Fixed in Debian 2.7.4-5.1 ]

nut (2.7.4-5.1) unstable; urgency=medium

  * Non-maintainer upload.

  [ Laurent Bigonville ]
  * debian/nut-server.postinst: The udevd process is called systemd-udevd for
    quite sometimes already, properly detect whether it's running or not, this
    should fix the devices permissions for USB UPS's (LP: #1540008)
  * debian/rules: Mask ups-monitor, this is not a real LSB initscript but it's
    a symlink to the nut-client one. The purpose of this was to offer a common
    interface to shutdown the UPS in case of power loss, this is not necessary
    with systemd as this functionality is handeled by the
    /lib/systemd/system-shutdown/nutshutdown script now.

  [ Michael Stapelberg ]
  * Update symbols file for gcc-7 (Closes: #853579)

 -- Nishanth Aravamudan <email address hidden>  Fri, 03 Nov 2017 16:34:18 -0700

Upload details

Uploaded by:
Nish Aravamudan
Sponsored by:
Christian Ehrhardt 
Uploaded to:
Bionic
Original maintainer:
Ubuntu Developers
Architectures:
any all
Section:
admin
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
nut_2.7.4.orig.tar.gz 2.4 MiB 980e82918c52d364605c0703a5dcf01f74ad2ef06e3d365949e43b7d406d25a7
nut_2.7.4-5.1ubuntu1.debian.tar.xz 58.9 KiB aca2d4316d84b844a14bbe42753f15c9da7b4bbe2348467fe29d2c53ea7f94e0
nut_2.7.4-5.1ubuntu1.dsc 3.2 KiB 363af74c7d0644e35fbb88d93fa520e35b5df6ba080eff823be9a9006549b0cc

View changes file

Binary packages built by this source

libnutclient-dev: network UPS tools - development files

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides the development files for the new client library.

libnutclient0: network UPS tools - new client library

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides the new shared client library.

libnutclient0-dbgsym: debug symbols for libnutclient0
libups-nut-perl: network UPS tools - Perl bindings for NUT server

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides Perl bindings to connect to NUT server.

libupsclient-dev: network UPS tools - development files

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides the development files.

libupsclient4: network UPS tools - client library

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides the shared client library.

libupsclient4-dbgsym: debug symbols for libupsclient4
nut: network UPS tools - metapackage

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package is a metapackage that installs both nut-server and nut-client,
 in most cases it is sufficient for a basic UPS monitoring system.

nut-cgi: network UPS tools - web interface

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides an HTTP interface for Network UPS Tools which makes
 it possible to monitor the core NUT system with a web browser.

nut-cgi-dbgsym: debug symbols for nut-cgi
nut-client: network UPS tools - clients

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides NUT's clients that allows the user to control
 and monitor the UPS.

nut-client-dbgsym: debug symbols for nut-client
nut-doc: network UPS tools - documentation

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package contains FAQ, user, developer and packager documentation.

nut-ipmi: network UPS tools - IPMI driver

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package currently provides nut-ipmipsu, a driver which allows the user to
 monitor IPMI power supply units (PSU) found in servers of popular brands, such
 as Dell, HP, IBM. It adds an IPMI interface to the core NUT system.

nut-ipmi-dbgsym: debug symbols for nut-ipmi
nut-monitor: network UPS tools - GUI application to monitor UPS status

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides nut-monitor, a GUI application to monitor UPS status.

nut-server: network UPS tools - core system

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides NUT's core system, and the serial and USB UPS
 drivers.

nut-server-dbgsym: debug symbols for nut-server
nut-snmp: network UPS tools - SNMP driver

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides snmp-ups, the SNMP multi-MIB driver for UPS, which
 supports various MIBs including IETF, MGE, and APC. It adds an SNMP
 Manager interface to the core NUT system.

nut-snmp-dbgsym: debug symbols for nut-snmp
nut-xml: network UPS tools - XML/HTTP driver

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides netxml-ups, which supports UPS models from
 Eaton or MGE that use an XML/HTTP-based Network Management Card or
 Proxy.

nut-xml-dbgsym: debug symbols for nut-xml
python-nut: network UPS tools - Python bindings for NUT server

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides Python bindings to connect to NUT server.