nut 2.7.4-7ubuntu1 source package in Ubuntu

Changelog

nut (2.7.4-7ubuntu1) cosmic; urgency=medium

  * Merge with Debian unstable (LP: #1774147). Remaining changes:
    - remove Build-Depends on libpowerman0-dev
    - remove nut-powerman-pdu
      + debian/control: remove nut-powerman-pdu package
      + debian/nut-powerman-pdu.{install,manpages}: dropped for now
    - debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
      debian/rules: Install apport hooks for all top-level nut packages.
    - debian/tests/test-nut.py: in the CVE_2012_2944 test, give nut at most
      + 5 seconds to shut down, instead of expecting it to be shut down
        immediately after sending the killall.
      + Additional indication on how to run tests for xenial+
    - debian/tests/control : Fix dep8 test failures:
       + Drop python-unit from dep8 dependencies since the python-test
         package has now been removed. The unittest module has shipped with
         Python since 2.1.
       + Add dep8 test dependency on python, since Python 2 is required and
         is not necessarily installed by default any more.
    - d/nut-server.postinst, d/nut-cgi.postinst: ensure nut is member of group
      dialout (This existed, but was missed in the Changelog).
    - debian/libnutclient0.symbols: Correct symbols file for ppc64el.
      (Reduced as it is partially in Debian now)
  * Dropped Changes
    - fix cflags/ldflags mismatch (LP #1711092)
      (no more needed)
    - debian/nut-{cgi,server}.postinst: fix 'adduser' logic to be
      unconditional, since adduser is guaranteed to be idempotent.
      (was a non functional comment only change)

nut (2.7.4-7) unstable; urgency=medium

  * debian/libnutclient0.symbols: Fix symbols file, this should fix FTBFS on
    most architectures.

nut (2.7.4-6) unstable; urgency=medium

  * debian/control: Switch dependency from python-gobject to python-gobject-2,
    the former is a transitional package (Closes: #890158)
  * debian/libnutclient0.symbols: Update the symbols file to fix the FTBFS on
    ppc64 and sparc64 architectures
  * debian/control: Add python-notify to the recommended packages of
    nut-monitor, it can displays notification in case the UPS is on battery
  * debian/control: Bump debhelper build-dependency and drop dh-systemd
  * debian/rules: Assign DEB_HOST_ARCH_OS with ?= instead of :? to please
    lintian
  * debian/libnutclient0.symbols: Fix version of symbols introduced in last
    NMU
  * Add python3-nut package
  * debian/control: Bump Standards-Version to 4.1.3 and bump existing packages
    from the extra priority to optional as the former is deprecated
  * debian/nut-server.lintian-overrides: Add overrides for
    udev-rule-missing-subsystem, the SUBSYSTEM check is at the top of the file

 -- Christian Ehrhardt <email address hidden>  Wed, 30 May 2018 10:44:42 +0200

Upload details

Uploaded by:
 Christian Ehrhardt  on 2018-05-31
Uploaded to:
Cosmic
Original maintainer:
Ubuntu Developers
Architectures:
any all
Section:
admin
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Cosmic release on 2018-05-31 main admin

Downloads

File Size SHA-256 Checksum
nut_2.7.4.orig.tar.gz 2.4 MiB 980e82918c52d364605c0703a5dcf01f74ad2ef06e3d365949e43b7d406d25a7
nut_2.7.4-7ubuntu1.debian.tar.xz 58.7 KiB ba9d1c3c9b864c7a6806063b95946e8fb435c053f16b9cd82d9b4f2fb81d7bca
nut_2.7.4-7ubuntu1.dsc 3.3 KiB 16ccf9f58540822f20545b2d40e204ab150b64180fe769e5897cb20b754270b0

View changes file

Binary packages built by this source

libnutclient-dev: network UPS tools - development files

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides the development files for the new client library.

libnutclient0: network UPS tools - new client library

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides the new shared client library.

libnutclient0-dbgsym: debug symbols for libnutclient0
libups-nut-perl: network UPS tools - Perl bindings for NUT server

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides Perl bindings to connect to NUT server.

libupsclient-dev: network UPS tools - development files

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides the development files.

libupsclient4: network UPS tools - client library

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides the shared client library.

libupsclient4-dbgsym: debug symbols for libupsclient4
nut: network UPS tools - metapackage

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package is a metapackage that installs both nut-server and nut-client,
 in most cases it is sufficient for a basic UPS monitoring system.

nut-cgi: network UPS tools - web interface

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides an HTTP interface for Network UPS Tools which makes
 it possible to monitor the core NUT system with a web browser.

nut-cgi-dbgsym: debug symbols for nut-cgi
nut-client: network UPS tools - clients

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides NUT's clients that allows the user to control
 and monitor the UPS.

nut-client-dbgsym: debug symbols for nut-client
nut-doc: network UPS tools - documentation

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package contains FAQ, user, developer and packager documentation.

nut-ipmi: network UPS tools - IPMI driver

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package currently provides nut-ipmipsu, a driver which allows the user to
 monitor IPMI power supply units (PSU) found in servers of popular brands, such
 as Dell, HP, IBM. It adds an IPMI interface to the core NUT system.

nut-ipmi-dbgsym: debug symbols for nut-ipmi
nut-monitor: network UPS tools - GUI application to monitor UPS status

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides nut-monitor, a GUI application to monitor UPS status.

nut-server: network UPS tools - core system

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides NUT's core system, and the serial and USB UPS
 drivers.

nut-server-dbgsym: debug symbols for nut-server
nut-snmp: network UPS tools - SNMP driver

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides snmp-ups, the SNMP multi-MIB driver for UPS, which
 supports various MIBs including IETF, MGE, and APC. It adds an SNMP
 Manager interface to the core NUT system.

nut-snmp-dbgsym: debug symbols for nut-snmp
nut-xml: network UPS tools - XML/HTTP driver

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides netxml-ups, which supports UPS models from
 Eaton or MGE that use an XML/HTTP-based Network Management Card or
 Proxy.

nut-xml-dbgsym: debug symbols for nut-xml
python-nut: network UPS tools - Python bindings for NUT server

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides Python bindings to connect to NUT server.

python3-nut: network UPS tools - Python3 bindings for NUT server

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides Python3 bindings to connect to NUT server.