Ubuntu

“pulseaudio” 0.9.8-1ubuntu1 source package in Ubuntu

Changelog

pulseaudio (0.9.8-1ubuntu1) hardy; urgency=low

  "Hail our new PulseAudio overlords (part two)."

  * Merge from Debian unstable.
  * Ubuntu-specific changes:
    - debian/control:
      + Don't build-depend on libjack0.100.0-dev or build jack module
        packages,
      + Update pulseaudio's Recommends and Suggests to accomodate
        existing promoted main packages,
      + Explicitly mention pasuspender in pulseaudio-utils's long
        description,
      + Add Vcs-Bzr URI,
      + Adhere to DebianMaintainerField;
    - debian/rules: Use multiuser for update-rc.d;
    - debian/patches/series: Retain the exclusion of
      0001-Set-ESD-socket-to-tmp-.esd-socket-to-match-up-with.patch.
  * Dropped Ubuntu-specific change (absorbed into Debian source):
    debian/patches/0002-Double-esound-maximum-sample-size.patch.

pulseaudio (0.9.8-1) unstable; urgency=low

  [ CJ van den Berg ]
  * New upstream version.
  * debian/overrides/pulseaudio: Remove override for setuid-binary.
  * debian/control:
    + Change the priority of all -dbg packages to extra.
    + Stop recommending libao-pulse. libao2 has built-in pulseaudio support.
    + Make pulseaudio conflict libltdl3 < 1.5.24-1 (Closes: #451638)
    + Change XS-Vcs-* tags to Vcs-*.
    + Add libpulsecore5-dbg package.
    + Rename gstreamer plugin package in recommends.
    + Add Homepage field.
    + Bump libpulsecore so version number to 5.
    + Conflict with all pre libpulsecore split packages.
  * debian/patches/0002-Fix-pa_readlink-to-put-a-0-in-the-right-location.patch:
    - Dropped, merged upstream.
  * debian/p..s/0003-Define-__NR_eventfd-on-arm-if-it-wasn-t-defined-yet.patch:
    - Dropped, merged upstream.
  * debian/patches/0002-Double-esound-maximum-sample-size.patch:
    + Added, from Ubuntu.
  * debian/p..s/0003-fix-uploading-of-samples-into-PA.-Problem-discovered.patch:
    + Added, svn commit r2074 from upstream.
  * debian/patches/0004-Force-module-tunnel-to-use-protocol-version-11.patch:
    + Added, fixes protocol errors in module-tunnel.
  * debian/pa..es/0005-make-sure-to-create-.pulse-before-using-any-config.patch:
    + Added, fixes module-volume-restore so that volumes are restored across
      daemon restarts.
  * debian/pulseaudio.manpages: Add manpages default.pa.5, pulse-client.conf.5
      and pulse-daemon.conf.5
  * debian/pulseaudio-utils.manpages: Add manpages pabrowse.1, pacat.1,
      pacmd.1, pactl.1, padsp.1, paplay.1, pasuspender.1 and pax11publish.1
  * debian/pulseaudio.default: Add a description of the preferred method of
      running the daemon.

  [Daniel T Chen]
  * debian/control: Add lsb-base (>= 3) to pulseaudio's dependencies.
  * debian/pulseaudio.init: LSB-ify.

 -- Daniel T Chen <email address hidden>   Tue, 04 Dec 2007 00:56:08 +0000

Upload details

Uploaded by:
Daniel T Chen on 2007-12-06
Uploaded to:
Hardy
Original maintainer:
Ubuntu Development Team
Component:
main
Architectures:
any
Section:
sound
Urgency:
Low Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size MD5 Checksum
pulseaudio_0.9.8.orig.tar.gz 1.0 MiB 184a41d5947e583d395f0a2541525fc2
pulseaudio_0.9.8-1ubuntu1.diff.gz 15.5 KiB bb846b75c80fc3a34f29449e8940ec23
pulseaudio_0.9.8-1ubuntu1.dsc 1.6 KiB f365da17b6c27cf108404d8bc50ac1fc

Binary packages built by this source

libpulse-browse0: PulseAudio client libraries (zeroconf support)

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
 .
 This package adds support for zeroconf (aka. Avahi, mdns) discovery of
 PulseAudio sinks and sources by client applications.

libpulse-browse0-dbg: PulseAudio client libraries (zeroconf support) debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains detached debugging symbols for the PulseAudio native
 interface zeroconf support client libraries.

libpulse-dev: PulseAudio client development headers and libraries

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Headers and libraries for developing applications that access a PulseAudio
 sound server via PulseAudio's native interface.

libpulse-mainloop-glib0: PulseAudio client libraries (glib support)

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
 .
 This package adds support for glib2 client applications.

libpulse-mainloop-glib0-dbg: PulseAudio client libraries (glib support) debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains detached debugging symbols for the PulseAudio native
 interface glib support client libraries.

libpulse0: PulseAudio client libraries

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.

libpulse0-dbg: PulseAudio client libraries detached debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains detached debugging symbols for the PulseAudio native
 interface client libraries.

libpulsecore5: PulseAudio sound server core

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This library provides core services to the PulseAudio daemon and modules
 the run inside the daemon.

libpulsecore5-dbg: PulseAudio sound server core detached debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains the detached debugging symbols for the daemon
 core.

pulseaudio: PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These are some of PulseAudio's features:
 .
   * High quality software mixing of multiple audio streams with support for
     more than one sink/source. May be used to combine multiple sound cards
     into one (with sample rate adjustment).
 .
   * Wide range of supported client libraries. ESD, ALSA, oss, libao and
     GStreamer client applications are supported as-is. Native PulseAudio
     plug-ins are also available for xmms and mplayer.
 .
   * Good low latency behaviour and very accurate latency measurement for
     playback and recording. Ability to fully synchronize multiple playback
     streams.
 .
   * Network transparency, allowing an application to play back or record
     audio on a different machine than the one it is running on.
 .
   * Extensible plug-in architecture with plug-ins for jackd, multicast-rtp
     lirc and avahi, just to name a few.
 .
 This package contains the daemon and basic module set.

pulseaudio-dbg: PulseAudio sound server detached debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains the detached debugging symbols for the daemon and
 basic module set.

pulseaudio-esound-compat: PulseAudio ESD compatibility layer

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains the ESD compatibility components and enables a
 PulseAudio sound server to fully replace ESD.

pulseaudio-esound-compat-dbg: PulseAudio ESD compatibility layer debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains debugging symbols for the ESD compatibility components.

pulseaudio-module-gconf: GConf module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to store additional configuration in GConf.
 .
 The module is called module-gconf.

pulseaudio-module-gconf-dbg: GConf module for PulseAudio sound server debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains debugging symbols for the PulseAudio GConf module.

pulseaudio-module-hal: HAL device detection module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to detect new sound devices dynamically via
 the HAL API.
 .
 The module is called module-hal-detect.

pulseaudio-module-hal-dbg: HAL module for PulseAudio sound server debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains debugging symbols for the HAL module for PulseAudio.

pulseaudio-module-lirc: lirc module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables the volume of a PulseAudio sink to be controlled when
 buttons of an infrared remote control are pressed (through LIRC).
 .
 The module is called module-lirc.

pulseaudio-module-lirc-dbg: lirc module for PulseAudio sound server debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains debugging symbols for the PulseAudio lirc module.

pulseaudio-module-x11: X11 module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish itself as the default sound
 server to the X11 root window automatically upon startup. The is also a
 module to playback a sound file in place of the X11 bell beep.
 .
 The modules are called module-x11-publish and module-x11-bell.

pulseaudio-module-x11-dbg: X11 module for PulseAudio sound server debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains debugging symbols for the PulseAudio X11 modules.

pulseaudio-module-zeroconf: Zeroconf module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish available sinks and sources via
 zeroconf (aka. Avahi, mdns).
 .
 The module is called module-zeroconf-publish.

pulseaudio-module-zeroconf-dbg: Zeroconf module for PulseAudio sound server debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains detached debugging symbols for the zeroconf module.

pulseaudio-utils: Command line tools for the PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These tools provide command line access to various features of the
 PulseAudio sound server. Included tools are:
 .
   pabrowse - Browse available PulseAudio servers on the local network.
   paplay - Playback a WAV file via a PulseAudio sink.
   pacat - Cat raw audio data to a PulseAudio sink.
   parec - Cat raw audio data from a PulseAudio source.
   pacmd - Connect to PulseAudio's built-in command line control interface.
   pactl - Send a control command to a PulseAudio server.
   padsp - /dev/dsp wrapper to transparently support OSS applications.
   pax11publish - Store/retrieve PulseAudio default server/sink/source
                  settings in the X11 root window.

pulseaudio-utils-dbg: PulseAudio command line tools detached debugging symbols

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains detached debugging symbols for the command line tools.