rdma-core 15-3 source package in Ubuntu

 The IB ACM implements and provides a framework for name, address, and
 route (path) resolution services over InfiniBand.
 It is intended to address connection setup scalability issues running
 MPI applications on large clusters. The IB ACM provides information
 needed to establish a connection, but does not implement the CM protocol.
 A primary user of the ibacm service is the librdmacm library.

 libibverbs is a library that allows userspace processes to use RDMA
 "verbs" as described in the InfiniBand Architecture Specification and
 the RDMA Protocol Verbs Specification. iWARP ethernet NICs support
 RDMA over hardware-offloaded TCP/IP, while InfiniBand is a
 high-throughput, low-latency networking technology. InfiniBand host
 channel adapters (HCAs) and iWARP NICs commonly support direct
 hardware access from userspace (kernel bypass), and libibverbs
 supports this when available.
 .
 A RDMA driver consists of a kernel portion and a user space portion.
 This package contains the user space verbs drivers:
 .
  - bnxt_re: Broadcom NetXtreme-E RoCE HCAs
  - cxgb3: Chelsio T3 iWARP HCAs
  - cxgb4: Chelsio T4 iWARP HCAs
  - hfi1verbs: Intel Omni-Path HFI
  - hns: HiSilicon Hip06 SoC
  - i40iw: Intel Ethernet Connection X722 RDMA
  - ipathverbs: QLogic InfiniPath HCAs
  - mlx4: Mellanox ConnectX-3 InfiniBand HCAs
  - mlx5: Mellanox Connect-IB/X-4+ InfiniBand HCAs
  - mthca: Mellanox InfiniBand HCAs
  - nes: Intel NetEffect NE020-based iWARP adapters
  - ocrdma: Emulex OneConnect RDMA/RoCE device
  - qedr: QLogic QL4xxx RoCE HCAs
  - rxe: A software implementation of the RoCE protocol
  - vmw_pvrdma: VMware paravirtual RDMA device

 libibverbs is a library that allows userspace processes to use RDMA
 "verbs" as described in the InfiniBand Architecture Specification and
 the RDMA Protocol Verbs Specification. iWARP ethernet NICs support
 RDMA over hardware-offloaded TCP/IP, while InfiniBand is a
 high-throughput, low-latency networking technology. InfiniBand host
 channel adapters (HCAs) and iWARP NICs commonly support direct
 hardware access from userspace (kernel bypass), and libibverbs
 supports this when available.
 .
 This package contains useful libibverbs1 example programs such as
 ibv_devinfo, which displays information about InfiniBand devices.

No description available for libibcm-dev in ubuntu bionic.

No description available for libibcm1 in ubuntu bionic.

No description available for libibcm1-dbgsym in ubuntu bionic.

 libibumad provides userspace Infiniband Management Datagram (uMAD)
 functions which sit on top of the uMAD modules in the kernel.
 These are used by InfiniBand diagnostic and management tools.
 .
 This package is needed to compile programs against libibumad.
 It contains the header files and static libraries (optionally)
 needed for compiling.

 libibumad provides userspace Infiniband Management Datagram (uMAD)
 functions which sit on top of the uMAD modules in the kernel.
 These are used by InfiniBand diagnostic and management tools.
 .
 This package contains the shared library.

 libibverbs is a library that allows userspace processes to use RDMA
 "verbs" as described in the InfiniBand Architecture Specification and
 the RDMA Protocol Verbs Specification. iWARP ethernet NICs support
 RDMA over hardware-offloaded TCP/IP, while InfiniBand is a
 high-throughput, low-latency networking technology. InfiniBand host
 channel adapters (HCAs) and iWARP NICs commonly support direct
 hardware access from userspace (kernel bypass), and libibverbs
 supports this when available.
 .
 This package is needed to compile programs against libibverbs1.
 It contains the header files and static libraries (optionally)
 needed for compiling.

 libibverbs is a library that allows userspace processes to use RDMA
 "verbs" as described in the InfiniBand Architecture Specification and
 the RDMA Protocol Verbs Specification. iWARP ethernet NICs support
 RDMA over hardware-offloaded TCP/IP, while InfiniBand is a
 high-throughput, low-latency networking technology. InfiniBand host
 channel adapters (HCAs) and iWARP NICs commonly support direct
 hardware access from userspace (kernel bypass), and libibverbs
 supports this when available.
 .
 For this library to be useful, a device-specific plug-in module
 should also be installed.
 .
 This package contains the shared library.

 librdmacm is a library that allows applications to set up reliable
 connected and unreliable datagram transfers when using RDMA adapters.
 It provides a transport-neutral interface in the sense that the same
 code can be used for both InfiniBand and iWARP adapters. The
 interface is based on sockets, but adapted for queue pair (QP) based
 semantics: communication must use a specific RDMA device, and data
 transfers are message-based.
 .
 librdmacm only provides communication management (connection setup
 and tear-down) and works in conjunction with the verbs interface
 provided by libibverbs, which provides the interface used to actually
 transfer data.
 .
 This package is needed to compile programs against librdmacm1.
 It contains the header files and static libraries (optionally)
 needed for compiling.

 librdmacm is a library that allows applications to set up reliable
 connected and unreliable datagram transfers when using RDMA adapters.
 It provides a transport-neutral interface in the sense that the same
 code can be used for both InfiniBand and iWARP adapters. The
 interface is based on sockets, but adapted for queue pair (QP) based
 semantics: communication must use a specific RDMA device, and data
 transfers are message-based.
 .
 librdmacm only provides communication management (connection setup
 and tear-down) and works in conjunction with the verbs interface
 provided by libibverbs, which provides the interface used to actually
 transfer data.
 .
 This package contains the shared library.

 This package provides the basic boot time support for systems that use the
 Linux kernel's remote direct memory access (RDMA) subystem which includes
 InfiniBand, iWARP, and RDMA over Converged Ethernet (RoCE).
 .
 Several kernel RDMA support daemons are included:
  - The rdma-ndd daemon which watches for RDMA device changes and/or hostname
    changes and updates the Node Description of the RDMA devices based on
    those changes.
  - The iWARP Port Mapper Daemon (iwpmd) which provides a kernel support
    service in userspace for iWARP drivers to claim TCP ports through the
    standard socket interface.

 librdmacm is a library that allows applications to set up reliable
 connected and unreliable datagram transfers when using RDMA adapters.
 It provides a transport-neutral interface in the sense that the same
 code can be used for both InfiniBand and iWARP adapters. The
 interface is based on sockets, but adapted for queue pair (QP) based
 semantics: communication must use a specific RDMA device, and data
 transfers are message-based.
 .
 librdmacm only provides communication management (connection setup
 and tear-down) and works in conjunction with the verbs interface
 provided by libibverbs, which provides the interface used to actually
 transfer data.
 .
 This package contains useful librdmacm1 example programs such as
 rping and udaddy.

 In conjunction with the kernel ib_srp driver, srptools allows you to
 discover and use Infiniband attached storage devices which use the
 SCSI RDMA Protocol (SRP).