RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '784081-1840915', '/home/buildd/filecache-default/05ed72be0d6b3618e2e22266fc9a300b75f69100'] Synching the system clock with the buildd NTP service... 7 Dec 05:50:51 ntpdate[12367]: adjust time server 10.211.37.1 offset 0.000952 sec Unpacking chroot for build 784081-1840915 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '784081-1840915'] Mounting chroot for build 784081-1840915 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '784081-1840915', 'universe'] Attempting OGRE for universe in build-784081-1840915 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '784081-1840915', 'deb http://ftpmaster.internal/ubuntu jaunty main universe'] Overriding sources.list in build-784081-1840915 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '784081-1840915'] Updating debian chroot for build 784081-1840915 Get:1 http://ftpmaster.internal jaunty Release.gpg [189B] Get:2 http://ftpmaster.internal jaunty Release [74.6kB] Ign http://ftpmaster.internal jaunty/main Packages/DiffIndex Get:3 http://ftpmaster.internal jaunty/universe Packages [3611kB] Get:4 http://ftpmaster.internal jaunty/main Packages [1213kB] Fetched 4899kB in 12s (391kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: binutils cpp-4.3 debianutils g++-4.3 gcc-4.3 gcc-4.3-base libc6 libc6-dev libgcc1 libgnutls26 libgomp1 libstdc++6 libstdc++6-4.3-dev linux-libc-dev procps 15 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/19.2MB of archives. After this operation, 283kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! debianutils linux-libc-dev libc6-dev libgomp1 gcc-4.3-base libstdc++6 cpp-4.3 binutils gcc-4.3 g++-4.3 libstdc++6-4.3-dev libgcc1 libc6 libgnutls26 procps Preconfiguring packages ... Authentication warning overridden. (Reading database ... 9539 files and directories currently installed.) Preparing to replace debianutils 2.30ubuntu1 (using .../debianutils_2.30ubuntu2_armel.deb) ... Unpacking replacement debianutils ... Setting up debianutils (2.30ubuntu2) ... (Reading database ... 9539 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.27-9.18 (using .../linux-libc-dev_2.6.28-2.3_armel.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libc6-dev 2.8+20081027-0ubuntu10 (using .../libc6-dev_2.9-0ubuntu5_armel.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libgomp1 4.3.2-2ubuntu4 (using .../libgomp1_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.3-base 4.3.2-2ubuntu4 (using .../gcc-4.3-base_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement gcc-4.3-base ... Setting up gcc-4.3-base (4.3.2-2ubuntu6) ... (Reading database ... 9550 files and directories currently installed.) Preparing to replace libstdc++6 4.3.2-2ubuntu4 (using .../libstdc++6_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.3.2-2ubuntu6) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place (Reading database ... 9550 files and directories currently installed.) Preparing to replace cpp-4.3 4.3.2-2ubuntu4 (using .../cpp-4.3_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement cpp-4.3 ... Preparing to replace binutils 2.19-0ubuntu2 (using .../binutils_2.19-0ubuntu3_armel.deb) ... Unpacking replacement binutils ... Preparing to replace gcc-4.3 4.3.2-2ubuntu4 (using .../gcc-4.3_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement gcc-4.3 ... Preparing to replace g++-4.3 4.3.2-2ubuntu4 (using .../g++-4.3_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement g++-4.3 ... Preparing to replace libstdc++6-4.3-dev 4.3.2-2ubuntu4 (using .../libstdc++6-4.3-dev_4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement libstdc++6-4.3-dev ... Preparing to replace libgcc1 1:4.3.2-2ubuntu4 (using .../libgcc1_1%3a4.3.2-2ubuntu6_armel.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.3.2-2ubuntu6) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place (Reading database ... 9550 files and directories currently installed.) Preparing to replace libc6 2.8+20081027-0ubuntu10 (using .../libc6_2.9-0ubuntu5_armel.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.9-0ubuntu5) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place (Reading database ... 9550 files and directories currently installed.) Preparing to replace libgnutls26 2.4.2-3 (using .../libgnutls26_2.4.2-4_armel.deb) ... Unpacking replacement libgnutls26 ... Preparing to replace procps 1:3.2.7-9ubuntu2 (using .../procps_1%3a3.2.7-9ubuntu3_armel.deb) ... Unpacking replacement procps ... Setting up linux-libc-dev (2.6.28-2.3) ... Setting up libc6-dev (2.9-0ubuntu5) ... Setting up libgomp1 (4.3.2-2ubuntu6) ... Setting up cpp-4.3 (4.3.2-2ubuntu6) ... Setting up binutils (2.19-0ubuntu3) ... Setting up gcc-4.3 (4.3.2-2ubuntu6) ... Setting up libgnutls26 (2.4.2-4) ... Setting up procps (1:3.2.7-9ubuntu3) ... Installing new version of config file /etc/sysctl.d/10-process-security.conf ... * Setting kernel variables (/etc/sysctl.conf)...  [ OK ] * Setting kernel variables (/etc/sysctl.d/10-console-messages.conf)...  [ OK ] * Setting kernel variables (/etc/sysctl.d/10-network-security.conf)...  [ OK ] * Setting kernel variables (/etc/sysctl.d/10-process-security.conf)...  error: "vm.mmap_min_addr" is an unknown key [fail] * Setting kernel variables (/etc/sysctl.d/10-tcp-timestamps-workaround.conf)...  [ OK ] Setting up libstdc++6-4.3-dev (4.3.2-2ubuntu6) ... Setting up g++-4.3 (4.3.2-2ubuntu6) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place removed: nologin@ modified: mtab RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '784081-1840915', '--nolog', '--batch', '--archive=ubuntu', '--purpose=PRIMARY', '--dist=jaunty', '--comp=universe', 'sac_1.9b5-2.dsc'] Initiating build Automatic build of sac_1.9b5-2 on kahikatea by sbuild/armel 1.170.5 Build started at 20081207-0551 ****************************************************************************** sac_1.9b5-2.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper Checking for already installed source dependencies... debhelper: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils curl file gettext gettext-base groff-base html2text intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libcroco3 libcurl3 libglib2.0-0 libglib2.0-data libio-compress-base-perl libio-compress-zlib-perl libmagic1 libmail-sendmail-perl libsys-hostname-long-perl libxml2 man-db po-debconf sgml-base xml-core Suggested packages: wamerican wordlist whois vacation dh-make cvs gettext-doc groff less www-browser libmail-box-perl sgml-base-doc The following NEW packages will be installed: bsdmainutils curl debhelper file gettext gettext-base groff-base html2text intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libcroco3 libcurl3 libglib2.0-0 libglib2.0-data libio-compress-base-perl libio-compress-zlib-perl libmagic1 libmail-sendmail-perl libsys-hostname-long-perl libxml2 man-db po-debconf sgml-base xml-core 0 upgraded, 25 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/7676kB of archives. After this operation, 29.2MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file bsdmainutils gettext-base groff-base libcompress-raw-zlib-perl libio-compress-base-perl libio-compress-zlib-perl libcompress-zlib-perl libxml2 man-db sgml-base xml-core libcurl3 curl html2text libglib2.0-0 libcroco3 gettext intltool-debian po-debconf debhelper libglib2.0-data libsys-hostname-long-perl libmail-sendmail-perl dpkg-preconfigure: unable to re-open stdin: Authentication warning overridden. Selecting previously deselected package libmagic1. (Reading database ... 9550 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_4.26-1_armel.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.26-1_armel.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_6.1.10ubuntu3_armel.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-6ubuntu1_armel.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.18.1.1-21_armel.deb) ... Selecting previously deselected package libcompress-raw-zlib-perl. Unpacking libcompress-raw-zlib-perl (from .../libcompress-raw-zlib-perl_2.015-1_armel.deb) ... Selecting previously deselected package libio-compress-base-perl. Unpacking libio-compress-base-perl (from .../libio-compress-base-perl_2.015-1_all.deb) ... Selecting previously deselected package libio-compress-zlib-perl. Unpacking libio-compress-zlib-perl (from .../libio-compress-zlib-perl_2.015-1_all.deb) ... Selecting previously deselected package libcompress-zlib-perl. Unpacking libcompress-zlib-perl (from .../libcompress-zlib-perl_2.015-1_all.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.6.32.dfsg-5ubuntu1_armel.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.3-1_armel.deb) ... Selecting previously deselected package sgml-base. Unpacking sgml-base (from .../sgml-base_1.26_all.deb) ... Selecting previously deselected package xml-core. Unpacking xml-core (from .../archives/xml-core_0.12_all.deb) ... Selecting previously deselected package libcurl3. Unpacking libcurl3 (from .../libcurl3_7.18.2-7ubuntu2_armel.deb) ... Selecting previously deselected package curl. Unpacking curl (from .../curl_7.18.2-7ubuntu2_armel.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-5_armel.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.19.2-0ubuntu2_armel.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.1-2_armel.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-6ubuntu1_armel.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.15ubuntu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.0.17ubuntu1_all.deb) ... Selecting previously deselected package libglib2.0-data. Unpacking libglib2.0-data (from .../libglib2.0-data_2.19.2-0ubuntu2_all.deb) ... Selecting previously deselected package libsys-hostname-long-perl. Unpacking libsys-hostname-long-perl (from .../libsys-hostname-long-perl_1.4-2_all.deb) ... Selecting previously deselected package libmail-sendmail-perl. Unpacking libmail-sendmail-perl (from .../libmail-sendmail-perl_0.79.16-1_all.deb) ... Setting up libmagic1 (4.26-1) ... Setting up file (4.26-1) ... Setting up bsdmainutils (6.1.10ubuntu3) ... Setting up gettext-base (0.17-6ubuntu1) ... Setting up groff-base (1.18.1.1-21) ... Setting up libcompress-raw-zlib-perl (2.015-1) ... Setting up libio-compress-base-perl (2.015-1) ... Setting up libio-compress-zlib-perl (2.015-1) ... Setting up libcompress-zlib-perl (2.015-1) ... Setting up libxml2 (2.6.32.dfsg-5ubuntu1) ... Setting up man-db (2.5.3-1) ... Building database of manual pages ... ... skipping, since this is a buildd Setting up sgml-base (1.26) ... Setting up xml-core (0.12) ... Setting up libcurl3 (7.18.2-7ubuntu2) ... Setting up curl (7.18.2-7ubuntu2) ... Setting up html2text (1.3.2a-5) ... Setting up libglib2.0-0 (2.19.2-0ubuntu2) ... Setting up libcroco3 (0.6.1-2) ... Setting up gettext (0.17-6ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.15ubuntu1) ... Setting up debhelper (7.0.17ubuntu1) ... Setting up libglib2.0-data (2.19.2-0ubuntu2) ... Setting up libsys-hostname-long-perl (1.4-2) ... Setting up libmail-sendmail-perl (0.79.16-1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place removed: nologin@ modified: mtab Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.9-0ubuntu5 make_3.81-5 dpkg-dev_1.14.22ubuntu1 g++-4.3_4.3.2-2ubuntu6 gcc-4.3_4.3.2-2ubuntu6 binutils_2.19-0ubuntu3 libstdc++6_4.3.2-2ubuntu6 libstdc++6-4.3-dev_4.3.2-2ubuntu6 ------------------------------------------------------------------------------ sh: gcc: command not found dpkg-source: warning: Couldn't determine gcc system type, falling back to default (native compilation) gpg: Signature made Mon Jul 7 19:05:37 2008 BST using DSA key ID DC814B09 gpg: Can't check signature: public key not found dpkg-source: extracting sac in sac-1.9b5 dpkg-source: info: unpacking sac_1.9b5.orig.tar.gz dpkg-source: info: applying sac_1.9b5-2.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package sac dpkg-buildpackage: source version 1.9b5-2 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean dh_testdir rm -f build build-arch /usr/bin/make clean make[1]: Entering directory `/build/buildd/sac-1.9b5' if [ -f sac ]; then rm sac; fi if [ -f rawtmp ]; then rm rawtmp; fi if [ -f writetmp ]; then rm writetmp; fi if [ -f wcat ]; then rm wcat; fi if [ -f sac.o -o -f raw.o -o -f writetmp.o -o -f wcat.o ]; then rm *.o; fi make[1]: Leaving directory `/build/buildd/sac-1.9b5' dh_clean debian/rules build dh_testdir /usr/bin/make "CFLAGS=-Wall -O2 -fomit-frame-pointer" make[1]: Entering directory `/build/buildd/sac-1.9b5' gcc -Wall -O2 -fomit-frame-pointer -DLINUX=1 -DRADIUS_DIR=\"/usr/adm/radacct\" -DDETAIL_NAME=\"detail\" -DUSE_FRAMED_IP_ADDR=0 -DUSE_CALLED_STATION_ID=0 -c sac.c sac.c: In function 'churn_time': sac.c:491: warning: pointer targets in passing argument 1 of 'atoi' differ in signedness sac.c:501: warning: pointer targets in passing argument 1 of 'atoi' differ in signedness sac.c: In function 'release': sac.c:1189: warning: unused variable 'ud' gcc -Wall -O2 -fomit-frame-pointer -DLINUX=1 -DRADIUS_DIR=\"/usr/adm/radacct\" -DDETAIL_NAME=\"detail\" -DUSE_FRAMED_IP_ADDR=0 -DUSE_CALLED_STATION_ID=0 -c gronk.c gcc -Wall -O2 -fomit-frame-pointer -s -o sac sac.o gronk.o gcc -Wall -O2 -fomit-frame-pointer -DLINUX=1 -c rawtmp.c rawtmp.c: In function 'main': rawtmp.c:118: warning: implicit declaration of function 'strcmp' rawtmp.c: In function 'churn_time': rawtmp.c:323: warning: pointer targets in passing argument 1 of 'atoi' differ in signedness rawtmp.c:333: warning: pointer targets in passing argument 1 of 'atoi' differ in signedness rawtmp.c: In function 'usage': rawtmp.c:391: warning: implicit declaration of function 'strlen' rawtmp.c:391: warning: incompatible implicit declaration of built-in function 'strlen' gcc -s -o rawtmp rawtmp.o gcc -Wall -O2 -fomit-frame-pointer -DLINUX=1 -c writetmp.c In function 'strncpy', inlined from 'doit_tacacs4' at writetmp.c:237: /usr/include/bits/string3.h:122: warning: call to __builtin___strncpy_chk will always overflow destination buffer In function 'strncpy', inlined from 'doit_tacacs4' at writetmp.c:238: /usr/include/bits/string3.h:122: warning: call to __builtin___strncpy_chk will always overflow destination buffer In function 'strncpy', inlined from 'doit_tacacs3' at writetmp.c:218: /usr/include/bits/string3.h:122: warning: call to __builtin___strncpy_chk will always overflow destination buffer In function 'strncpy', inlined from 'doit_tacacs3' at writetmp.c:219: /usr/include/bits/string3.h:122: warning: call to __builtin___strncpy_chk will always overflow destination buffer gcc -s -o writetmp writetmp.o gcc -Wall -O2 -fomit-frame-pointer -DLINUX=1 -c wcat.c wcat.c: In function 'main': wcat.c:113: warning: implicit declaration of function 'strcmp' wcat.c: In function 'doit': wcat.c:163: warning: ignoring return value of 'write', declared with attribute warn_unused_result wcat.c: In function 'doit_tacacs3': wcat.c:184: warning: ignoring return value of 'write', declared with attribute warn_unused_result wcat.c: In function 'doit_tacacs4': wcat.c:205: warning: ignoring return value of 'write', declared with attribute warn_unused_result wcat.c: In function 'churn_time': wcat.c:248: warning: pointer targets in passing argument 1 of 'atoi' differ in signedness wcat.c:258: warning: pointer targets in passing argument 1 of 'atoi' differ in signedness wcat.c: In function 'usage': wcat.c:292: warning: implicit declaration of function 'strlen' wcat.c:292: warning: incompatible implicit declaration of built-in function 'strlen' gcc -s -o wcat wcat.o make[1]: Leaving directory `/build/buildd/sac-1.9b5' touch build-arch dh_testdir touch build /usr/bin/fakeroot debian/rules binary-arch dh_testdir dh_testroot dh_clean -k -s dh_installdirs -s make install BINDIR=debian/sac/usr/bin MANDIR=debian/sac/usr/share/man make[1]: Entering directory `/build/buildd/sac-1.9b5' install -d debian/sac/usr/bin if [ -f sac ]; then \ install -m 0111 -s sac debian/sac/usr/bin/sac; \ fi if [ -f rawtmp ]; then \ install -m 0111 -s rawtmp debian/sac/usr/bin/rawtmp; \ fi if [ -f writetmp ]; then \ install -m 0111 -s writetmp debian/sac/usr/bin/writetmp; \ fi if [ -f wcat ]; then \ install -m 0111 -s wcat debian/sac/usr/bin/wcat; \ fi for man in sac.8 rawtmp.1 writetmp.8; do \ m=`expr match $man '.*\(.\)'`; \ install -m 0444 $man debian/sac/usr/share/man/man$m/$man; \ done make[1]: Leaving directory `/build/buildd/sac-1.9b5' dh_install -s dh_testdir -a dh_testroot -a dh_installdocs -a debian/README.Debian debian/*.lsm README THANKS TODO debian/notes dh_installexamples -a scripts/* dh_installdebconf -a dh_installman -a dh_installchangelogs -a CHANGES dh_link -a dh_compress -a dh_fixperms -a dh_makeshlibs -a dh_installdeb -a dh_shlibdeps -a dh_gencontrol -a dh_md5sums -a dh_builddeb -a pkgstriptranslations: processing control file: ./debian/sac/DEBIAN/control, package sac, directory ./debian/sac pkgstriptranslations: sac does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu MOTU Developers " warning, `debian/sac/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `sac' in `../sac_1.9b5-2_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../sac_1.9b5-2_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20081207-0552 chroot-autobuild/build/buildd/sac_1.9b5-2_armel.deb: new debian package, version 2.0. size 63938 bytes: control archive= 1222 bytes. 465 bytes, 13 lines control 1577 bytes, 25 lines md5sums Package: sac Version: 1.9b5-2 Architecture: armel Maintainer: Ubuntu MOTU Developers Original-Maintainer: Javier Fernandez-Sanguino Pen~a Installed-Size: 232 Depends: libc6 (>= 2.4) Section: admin Priority: optional Description: Login accounting Performs login accounting, just like the ac program but with totals, per day and per users. Also performs average usage and hourly profiling. Tons of other options. chroot-autobuild/build/buildd/sac_1.9b5-2_armel.deb: drwxr-xr-x root/root 0 2008-12-07 05:52 ./ drwxr-xr-x root/root 0 2008-12-07 05:52 ./usr/ drwxr-xr-x root/root 0 2008-12-07 05:52 ./usr/bin/ -rwxr-xr-x root/root 55500 2008-12-07 05:52 ./usr/bin/sac -rwxr-xr-x root/root 10280 2008-12-07 05:52 ./usr/bin/writetmp -rwxr-xr-x root/root 10044 2008-12-07 05:52 ./usr/bin/wcat -rwxr-xr-x root/root 10052 2008-12-07 05:52 ./usr/bin/rawtmp drwxr-xr-x root/root 0 2008-12-07 05:52 ./usr/share/ drwxr-xr-x root/root 0 2008-12-07 05:52 ./usr/share/man/ drwxr-xr-x root/root 0 2008-12-07 05:52 ./usr/share/man/man1/ -rw-r--r-- root/root 1343 2008-12-07 05:52 ./usr/share/man/man1/rawtmp.1.gz -rw-r--r-- root/root 929 2008-12-07 05:52 ./usr/share/man/man1/wcat.1.gz drwxr-xr-x root/root 0 2008-12-07 05:52 ./usr/share/man/man8/ -rw-r--r-- root/root 2079 2008-12-07 05:52 ./usr/share/man/man8/writetmp.8.gz -rw-r--r-- root/root 5575 2008-12-07 05:52 ./usr/share/man/man8/sac.8.gz drwxr-xr-x root/root 0 2008-12-07 05:52 ./usr/share/doc/ drwxr-xr-x root/root 0 2008-12-07 05:52 ./usr/share/doc/sac/ -rw-r--r-- root/root 555 2008-12-07 05:52 ./usr/share/doc/sac/README.Debian drwxr-xr-x root/root 0 2008-12-07 05:52 ./usr/share/doc/sac/examples/ -rwxr-xr-x root/root 208 1997-08-04 17:49 ./usr/share/doc/sac/examples/modemhogs -rwxr-xr-x root/root 1037 1997-08-04 17:46 ./usr/share/doc/sac/examples/check -rw-r--r-- root/root 384 1997-06-04 19:03 ./usr/share/doc/sac/examples/oldsac.html -rwxr-xr-x root/root 705 1999-12-15 20:30 ./usr/share/doc/sac/examples/oldsac.cgi -rwxr-xr-x root/root 97 1998-03-17 03:41 ./usr/share/doc/sac/examples/usage -rwxr-xr-x root/root 552 2008-12-07 05:52 ./usr/share/doc/sac/examples/pretty -rw-r--r-- root/root 1115 2000-01-05 17:38 ./usr/share/doc/sac/examples/sac.html -rw-r--r-- root/root 1647 2000-01-05 17:32 ./usr/share/doc/sac/examples/sac.cgi.gz -rw-r--r-- root/root 2187 2001-06-29 21:40 ./usr/share/doc/sac/TODO -rw-r--r-- root/root 1752 2008-12-07 05:52 ./usr/share/doc/sac/changelog.Debian.gz -rw-r--r-- root/root 686 2008-12-07 05:52 ./usr/share/doc/sac/sac-1.8b8.lsm -rw-r--r-- root/root 4586 2004-03-29 21:58 ./usr/share/doc/sac/changelog.gz -rw-r--r-- root/root 1071 2008-12-07 05:52 ./usr/share/doc/sac/copyright -rw-r--r-- root/root 390 2008-12-07 05:52 ./usr/share/doc/sac/notes -rw-r--r-- root/root 1928 2000-01-13 18:40 ./usr/share/doc/sac/README -rw-r--r-- root/root 2616 2003-03-21 17:28 ./usr/share/doc/sac/THANKS.gz sac_1.9b5-2_armel.changes: Format: 1.8 Date: Mon, 07 Jul 2008 19:54:29 +0200 Source: sac Binary: sac Architecture: armel Version: 1.9b5-2 Distribution: jaunty Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: Javier Fernandez-Sanguino Pen~a Description: sac - Login accounting Closes: 489655 Changes: sac (1.9b5-2) unstable; urgency=low . * Fix bashishm in example script (pretty) but at the same time make it bash-specific since the 'while read' loop does not read information from stdin in dash as in bash (it doesn't chomp whitespaces) (Closes: #489655) * Use DEBHELPER compatibility version 5 and adapt debian/rules accordingly Checksums-Sha1: d49501000d8217201c70cf969cbc9dda6e293ed9 63938 sac_1.9b5-2_armel.deb Checksums-Sha256: 69a1373121991b50ce7f61f32ba3368410e94a81591af65780cb148a0057f7fe 63938 sac_1.9b5-2_armel.deb Files: 3eee8df334413776701818b24cce657d 63938 admin optional sac_1.9b5-2_armel.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/sac-1.9b5 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --root=/home/buildd/build-784081-1840915/chroot-autobuild --purge intltool-debian groff-base libglib2.0-0 libio-compress-base-perl libcurl3 libcompress-zlib-perl gettext file libglib2.0-data xml-core html2text curl gettext-base debhelper sgml-base po-debconf libcroco3 libmagic1 libcompress-raw-zlib-perl libxml2 libio-compress-zlib-perl libsys-hostname-long-perl libmail-sendmail-perl bsdmainutils man-db (Reading database ... 10797 files and directories currently installed.) Removing libcompress-zlib-perl ... Removing libglib2.0-data ... Removing xml-core ... Purging configuration files for xml-core ... dpkg - warning: while removing xml-core, directory `/etc/sgml' not empty so not removed. Removing curl ... Removing debhelper ... Removing sgml-base ... Purging configuration files for sgml-base ... Removing po-debconf ... Removing libio-compress-zlib-perl ... Removing libmail-sendmail-perl ... Removing man-db ... Purging configuration files for man-db ... Removing intltool-debian ... Removing groff-base ... Purging configuration files for groff-base ... Removing libio-compress-base-perl ... Removing libcurl3 ... Purging configuration files for libcurl3 ... Removing gettext ... Removing file ... Purging configuration files for file ... Removing html2text ... Purging configuration files for html2text ... Removing gettext-base ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libcompress-raw-zlib-perl ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libsys-hostname-long-perl ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Processing triggers for libc6 ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20081207-0552 Build needed 00:00:47, 832k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '784081-1840915'] Scanning for processes to kill in build 784081-1840915... Scanning for processes to kill in build /home/buildd/build-784081-1840915/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '784081-1840915'] Unmounting chroot for build 784081-1840915... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '784081-1840915'] Removing build 784081-1840915