RUN: /usr/share/launchpad-buildd/slavebin/slave-prep ['slave-prep'] Forking launchpad-buildd slave process... Kernel version: 2.6.38-1209-omap4 #25-Ubuntu SMP PREEMPT Mon Jul 30 17:18:20 UTC 2012 armv7l Buildd toolchain package versions: launchpad-buildd_113~0.IS.08.04 python-lpbuildd_113~0.IS.08.04 bzr_2.3.4-0ubuntu1. Syncing the system clock with the buildd NTP service... 23 Aug 17:20:47 ntpdate[29377]: adjust time server 10.211.37.1 offset 0.004684 sec RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', 'a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849', '/home/buildd/filecache-default/bb8fcd240386cc9c06495756b96e87cdcf0d3a19'] Unpacking chroot for build a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', 'a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849'] Mounting chroot for build a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', 'a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849', 'deb http://ftpmaster.internal/ubuntu quantal main'] Overriding sources.list in build-a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', 'a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849', 'armel'] Updating debian chroot for build a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849 Ign http://ftpmaster.internal quantal InRelease Get:1 http://ftpmaster.internal quantal Release.gpg [198 B] Get:2 http://ftpmaster.internal quantal Release [49.6 kB] Get:3 http://ftpmaster.internal quantal/main armel Packages [1138 kB] Get:4 http://ftpmaster.internal quantal/main Translation-en [659 kB] Fetched 1848 kB in 6s (286 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: apt apt-transport-https binutils bzip2 cpp-4.7 dash debconf e2fslibs e2fsprogs g++-4.7 gcc-4.7 gcc-4.7-base gnupg gpgv initscripts insserv libapt-pkg4.12 libbz2-1.0 libc-bin libc-dev-bin libc6 libc6-dev libcomerr2 libcurl3-gnutls libdbus-1-3 libdrm-nouveau1a libdrm-radeon1 libdrm2 libgcc1 libglib2.0-0 libgomp1 libgssapi-krb5-2 libk5crypto3 libkms1 libkrb5-3 libkrb5support0 libldap-2.4-2 libp11-kit0 libplymouth2 libprocps0 libsasl2-2 libslang2 libss2 libstdc++6 libstdc++6-4.7-dev linux-libc-dev lsb-base make multiarch-support plymouth procps python2.7-minimal sysv-rc sysvinit-utils tzdata upstart 56 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 39.9 MB of archives. After this operation, 1735 kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! dash insserv sysv-rc initscripts upstart libc-dev-bin libc6-dev libc-bin libc6 debconf sysvinit-utils lsb-base libdbus-1-3 linux-libc-dev libgomp1 gcc-4.7-base libgcc1 cpp-4.7 libstdc++6-4.7-dev g++-4.7 gcc-4.7 libstdc++6 binutils tzdata e2fslibs e2fsprogs bzip2 libbz2-1.0 libapt-pkg4.12 gpgv gnupg apt libcomerr2 libslang2 libss2 libdrm2 libdrm-nouveau1a libdrm-radeon1 libglib2.0-0 libkms1 libprocps0 libk5crypto3 libgssapi-krb5-2 libkrb5-3 libkrb5support0 libsasl2-2 libldap-2.4-2 libcurl3-gnutls libp11-kit0 multiarch-support plymouth libplymouth2 procps python2.7-minimal apt-transport-https make Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ quantal/main dash armel 0.5.7-3ubuntu1 [82.7 kB] Get:2 http://ftpmaster.internal/ubuntu/ quantal/main insserv armel 1.14.0-4ubuntu1 [43.2 kB] Get:3 http://ftpmaster.internal/ubuntu/ quantal/main sysv-rc all 2.88dsf-13.10ubuntu13 [44.6 kB] Get:4 http://ftpmaster.internal/ubuntu/ quantal/main initscripts armel 2.88dsf-13.10ubuntu13 [27.8 kB] Get:5 http://ftpmaster.internal/ubuntu/ quantal/main upstart armel 1.5-0ubuntu8 [327 kB] Get:6 http://ftpmaster.internal/ubuntu/ quantal/main libc-dev-bin armel 2.15-0ubuntu17 [77.9 kB] Get:7 http://ftpmaster.internal/ubuntu/ quantal/main libc6-dev armel 2.15-0ubuntu17 [2295 kB] Get:8 http://ftpmaster.internal/ubuntu/ quantal/main libc-bin armel 2.15-0ubuntu17 [1069 kB] Get:9 http://ftpmaster.internal/ubuntu/ quantal/main libc6 armel 2.15-0ubuntu17 [4020 kB] Get:10 http://ftpmaster.internal/ubuntu/ quantal/main debconf all 1.5.46ubuntu1 [149 kB] Get:11 http://ftpmaster.internal/ubuntu/ quantal/main sysvinit-utils armel 2.88dsf-13.10ubuntu13 [59.3 kB] Get:12 http://ftpmaster.internal/ubuntu/ quantal/main lsb-base all 4.0-0ubuntu23 [10.1 kB] Get:13 http://ftpmaster.internal/ubuntu/ quantal/main libdbus-1-3 armel 1.6.4-1ubuntu1 [133 kB] Get:14 http://ftpmaster.internal/ubuntu/ quantal/main linux-libc-dev armel 3.5.0-11.11 [854 kB] Get:15 http://ftpmaster.internal/ubuntu/ quantal/main libgomp1 armel 4.7.1-7ubuntu1 [30.5 kB] Get:16 http://ftpmaster.internal/ubuntu/ quantal/main gcc-4.7-base armel 4.7.1-7ubuntu1 [15.5 kB] Get:17 http://ftpmaster.internal/ubuntu/ quantal/main libgcc1 armel 1:4.7.1-7ubuntu1 [52.8 kB] Get:18 http://ftpmaster.internal/ubuntu/ quantal/main cpp-4.7 armel 4.7.1-7ubuntu1 [4774 kB] Get:19 http://ftpmaster.internal/ubuntu/ quantal/main libstdc++6-4.7-dev armel 4.7.1-7ubuntu1 [1793 kB] Get:20 http://ftpmaster.internal/ubuntu/ quantal/main g++-4.7 armel 4.7.1-7ubuntu1 [6529 kB] Get:21 http://ftpmaster.internal/ubuntu/ quantal/main gcc-4.7 armel 4.7.1-7ubuntu1 [5588 kB] Get:22 http://ftpmaster.internal/ubuntu/ quantal/main libstdc++6 armel 4.7.1-7ubuntu1 [280 kB] Get:23 http://ftpmaster.internal/ubuntu/ quantal/main binutils armel 2.22.90.20120816-2ubuntu1 [2346 kB] Get:24 http://ftpmaster.internal/ubuntu/ quantal/main tzdata all 2012e-0ubuntu1 [475 kB] Get:25 http://ftpmaster.internal/ubuntu/ quantal/main e2fslibs armel 1.42.5-1ubuntu2 [188 kB] Get:26 http://ftpmaster.internal/ubuntu/ quantal/main e2fsprogs armel 1.42.5-1ubuntu2 [994 kB] Get:27 http://ftpmaster.internal/ubuntu/ quantal/main bzip2 armel 1.0.6-4 [39.1 kB] Get:28 http://ftpmaster.internal/ubuntu/ quantal/main libbz2-1.0 armel 1.0.6-4 [37.7 kB] Get:29 http://ftpmaster.internal/ubuntu/ quantal/main libapt-pkg4.12 armel 0.9.7.1ubuntu2 [719 kB] Get:30 http://ftpmaster.internal/ubuntu/ quantal/main gpgv armel 1.4.11-3ubuntu3 [164 kB] Get:31 http://ftpmaster.internal/ubuntu/ quantal/main gnupg armel 1.4.11-3ubuntu3 [754 kB] Get:32 http://ftpmaster.internal/ubuntu/ quantal/main apt armel 0.9.7.1ubuntu2 [925 kB] Get:33 http://ftpmaster.internal/ubuntu/ quantal/main libcomerr2 armel 1.42.5-1ubuntu2 [58.9 kB] Get:34 http://ftpmaster.internal/ubuntu/ quantal/main libslang2 armel 2.2.4-15ubuntu1 [452 kB] Get:35 http://ftpmaster.internal/ubuntu/ quantal/main libss2 armel 1.42.5-1ubuntu2 [63.0 kB] Get:36 http://ftpmaster.internal/ubuntu/ quantal/main libdrm2 armel 2.4.38-0ubuntu2 [24.6 kB] Get:37 http://ftpmaster.internal/ubuntu/ quantal/main libdrm-nouveau1a armel 2.4.38-0ubuntu2 [13.8 kB] Get:38 http://ftpmaster.internal/ubuntu/ quantal/main libdrm-radeon1 armel 2.4.38-0ubuntu2 [21.4 kB] Get:39 http://ftpmaster.internal/ubuntu/ quantal/main libglib2.0-0 armel 2.33.10-0ubuntu3 [1122 kB] Get:40 http://ftpmaster.internal/ubuntu/ quantal/main libkms1 armel 2.4.38-0ubuntu2 [8228 B] Get:41 http://ftpmaster.internal/ubuntu/ quantal/main libprocps0 armel 1:3.3.3-2ubuntu3 [35.4 kB] Get:42 http://ftpmaster.internal/ubuntu/ quantal/main libk5crypto3 armel 1.10.1+dfsg-2 [81.9 kB] Get:43 http://ftpmaster.internal/ubuntu/ quantal/main libgssapi-krb5-2 armel 1.10.1+dfsg-2 [102 kB] Get:44 http://ftpmaster.internal/ubuntu/ quantal/main libkrb5-3 armel 1.10.1+dfsg-2 [308 kB] Get:45 http://ftpmaster.internal/ubuntu/ quantal/main libkrb5support0 armel 1.10.1+dfsg-2 [21.0 kB] Get:46 http://ftpmaster.internal/ubuntu/ quantal/main libsasl2-2 armel 2.1.25.dfsg1-4build1 [59.0 kB] Get:47 http://ftpmaster.internal/ubuntu/ quantal/main libldap-2.4-2 armel 2.4.31-1ubuntu2 [164 kB] Get:48 http://ftpmaster.internal/ubuntu/ quantal/main libcurl3-gnutls armel 7.27.0-1ubuntu1 [227 kB] Get:49 http://ftpmaster.internal/ubuntu/ quantal/main libp11-kit0 armel 0.13-1 [33.2 kB] Get:50 http://ftpmaster.internal/ubuntu/ quantal/main multiarch-support armel 2.15-0ubuntu17 [4476 B] Get:51 http://ftpmaster.internal/ubuntu/ quantal/main plymouth armel 0.8.4-0ubuntu3 [117 kB] Get:52 http://ftpmaster.internal/ubuntu/ quantal/main libplymouth2 armel 0.8.4-0ubuntu3 [92.0 kB] Get:53 http://ftpmaster.internal/ubuntu/ quantal/main procps armel 1:3.3.3-2ubuntu3 [233 kB] Get:54 http://ftpmaster.internal/ubuntu/ quantal/main python2.7-minimal armel 2.7.3-0ubuntu4 [1637 kB] Get:55 http://ftpmaster.internal/ubuntu/ quantal/main apt-transport-https armel 0.9.7.1ubuntu2 [15.5 kB] Get:56 http://ftpmaster.internal/ubuntu/ quantal/main make armel 3.81-8.2 [111 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 39.9 MB in 13s (2935 kB/s) (Reading database ... 12181 files and directories currently installed.) Preparing to replace dash 0.5.7-2ubuntu2 (using .../dash_0.5.7-3ubuntu1_armel.deb) ... Unpacking replacement dash ... Setting up dash (0.5.7-3ubuntu1) ... (Reading database ... 12181 files and directories currently installed.) Preparing to replace insserv 1.14.0-2.1ubuntu2 (using .../insserv_1.14.0-4ubuntu1_armel.deb) ... Unpacking replacement insserv ... Preparing to replace sysv-rc 2.88dsf-13.10ubuntu11 (using .../sysv-rc_2.88dsf-13.10ubuntu13_all.deb) ... Unpacking replacement sysv-rc ... Preparing to replace initscripts 2.88dsf-13.10ubuntu11 (using .../initscripts_2.88dsf-13.10ubuntu13_armel.deb) ... Unpacking replacement initscripts ... Preparing to replace upstart 1.5-0ubuntu7 (using .../upstart_1.5-0ubuntu8_armel.deb) ... Unpacking replacement upstart ... Preparing to replace libc-dev-bin 2.15-0ubuntu15 (using .../libc-dev-bin_2.15-0ubuntu17_armel.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6-dev:armel 2.15-0ubuntu15 (using .../libc6-dev_2.15-0ubuntu17_armel.deb) ... Unpacking replacement libc6-dev:armel ... Preparing to replace libc-bin 2.15-0ubuntu15 (using .../libc-bin_2.15-0ubuntu17_armel.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.15-0ubuntu17) ... (Reading database ... 12171 files and directories currently installed.) Preparing to replace libc6:armel 2.15-0ubuntu15 (using .../libc6_2.15-0ubuntu17_armel.deb) ... Unpacking replacement libc6:armel ... Setting up libc6:armel (2.15-0ubuntu17) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12171 files and directories currently installed.) Preparing to replace debconf 1.5.45ubuntu1 (using .../debconf_1.5.46ubuntu1_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.46ubuntu1) ... (Reading database ... 12171 files and directories currently installed.) Preparing to replace sysvinit-utils 2.88dsf-13.10ubuntu11 (using .../sysvinit-utils_2.88dsf-13.10ubuntu13_armel.deb) ... Unpacking replacement sysvinit-utils ... Preparing to replace lsb-base 4.0-0ubuntu22 (using .../lsb-base_4.0-0ubuntu23_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (4.0-0ubuntu23) ... (Reading database ... 12171 files and directories currently installed.) Preparing to replace libdbus-1-3:armel 1.4.18-1ubuntu1 (using .../libdbus-1-3_1.6.4-1ubuntu1_armel.deb) ... Unpacking replacement libdbus-1-3:armel ... Preparing to replace linux-libc-dev:armel 3.5.0-4.4 (using .../linux-libc-dev_3.5.0-11.11_armel.deb) ... Unpacking replacement linux-libc-dev:armel ... Preparing to replace libgomp1:armel 4.7.1-3ubuntu1 (using .../libgomp1_4.7.1-7ubuntu1_armel.deb) ... Unpacking replacement libgomp1:armel ... Preparing to replace gcc-4.7-base:armel 4.7.1-3ubuntu1 (using .../gcc-4.7-base_4.7.1-7ubuntu1_armel.deb) ... Unpacking replacement gcc-4.7-base:armel ... Setting up gcc-4.7-base:armel (4.7.1-7ubuntu1) ... (Reading database ... 12171 files and directories currently installed.) Preparing to replace libgcc1:armel 1:4.7.1-3ubuntu1 (using .../libgcc1_1%3a4.7.1-7ubuntu1_armel.deb) ... Unpacking replacement libgcc1:armel ... Setting up libgcc1:armel (1:4.7.1-7ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12171 files and directories currently installed.) Preparing to replace cpp-4.7 4.7.1-3ubuntu1 (using .../cpp-4.7_4.7.1-7ubuntu1_armel.deb) ... Unpacking replacement cpp-4.7 ... Preparing to replace libstdc++6-4.7-dev 4.7.1-3ubuntu1 (using .../libstdc++6-4.7-dev_4.7.1-7ubuntu1_armel.deb) ... Unpacking replacement libstdc++6-4.7-dev ... Preparing to replace g++-4.7 4.7.1-3ubuntu1 (using .../g++-4.7_4.7.1-7ubuntu1_armel.deb) ... Unpacking replacement g++-4.7 ... Preparing to replace gcc-4.7 4.7.1-3ubuntu1 (using .../gcc-4.7_4.7.1-7ubuntu1_armel.deb) ... Unpacking replacement gcc-4.7 ... Preparing to replace libstdc++6:armel 4.7.1-3ubuntu1 (using .../libstdc++6_4.7.1-7ubuntu1_armel.deb) ... Unpacking replacement libstdc++6:armel ... Setting up libstdc++6:armel (4.7.1-7ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12171 files and directories currently installed.) Preparing to replace binutils 2.22.52.20120713-0ubuntu1 (using .../binutils_2.22.90.20120816-2ubuntu1_armel.deb) ... Unpacking replacement binutils ... Preparing to replace tzdata 2012c-1 (using .../tzdata_2012e-0ubuntu1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2012e-0ubuntu1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Aug 23 17:23:04 UTC 2012. Universal Time is now: Thu Aug 23 17:23:04 UTC 2012. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... 12171 files and directories currently installed.) Preparing to replace e2fslibs:armel 1.42.4-3ubuntu1 (using .../e2fslibs_1.42.5-1ubuntu2_armel.deb) ... Unpacking replacement e2fslibs:armel ... Setting up e2fslibs:armel (1.42.5-1ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12171 files and directories currently installed.) Preparing to replace e2fsprogs 1.42.4-3ubuntu1 (using .../e2fsprogs_1.42.5-1ubuntu2_armel.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.42.5-1ubuntu2) ... (Reading database ... 12171 files and directories currently installed.) Preparing to replace bzip2 1.0.6-3 (using .../bzip2_1.0.6-4_armel.deb) ... Unpacking replacement bzip2 ... Preparing to replace libbz2-1.0:armel 1.0.6-3 (using .../libbz2-1.0_1.0.6-4_armel.deb) ... Unpacking replacement libbz2-1.0:armel ... Setting up libbz2-1.0:armel (1.0.6-4) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12171 files and directories currently installed.) Preparing to replace libapt-pkg4.12:armel 0.9.7.1ubuntu1 (using .../libapt-pkg4.12_0.9.7.1ubuntu2_armel.deb) ... Unpacking replacement libapt-pkg4.12:armel ... Setting up libapt-pkg4.12:armel (0.9.7.1ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12171 files and directories currently installed.) Preparing to replace gpgv 1.4.11-3ubuntu2 (using .../gpgv_1.4.11-3ubuntu3_armel.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.11-3ubuntu3) ... (Reading database ... 12171 files and directories currently installed.) Preparing to replace gnupg 1.4.11-3ubuntu2 (using .../gnupg_1.4.11-3ubuntu3_armel.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.11-3ubuntu3) ... (Reading database ... 12171 files and directories currently installed.) Preparing to replace apt 0.9.7.1ubuntu1 (using .../apt_0.9.7.1ubuntu2_armel.deb) ... Unpacking replacement apt ... Setting up apt (0.9.7.1ubuntu2) ... gpg: key 437D05B5: "Ubuntu Archive Automatic Signing Key " not changed gpg: key FBB75451: "Ubuntu CD Image Automatic Signing Key " not changed gpg: key C0B21F32: "Ubuntu Archive Automatic Signing Key (2012) " not changed gpg: key EFE21092: "Ubuntu CD Image Automatic Signing Key (2012) " not changed gpg: Total number processed: 4 gpg: unchanged: 4 (Reading database ... 12171 files and directories currently installed.) Preparing to replace libcomerr2:armel 1.42.4-3ubuntu1 (using .../libcomerr2_1.42.5-1ubuntu2_armel.deb) ... Unpacking replacement libcomerr2:armel ... Setting up libcomerr2:armel (1.42.5-1ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12171 files and directories currently installed.) Preparing to replace libslang2:armel 2.2.4-10ubuntu1 (using .../libslang2_2.2.4-15ubuntu1_armel.deb) ... Unpacking replacement libslang2:armel ... Setting up libslang2:armel (2.2.4-15ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12171 files and directories currently installed.) Preparing to replace libss2:armel 1.42.4-3ubuntu1 (using .../libss2_1.42.5-1ubuntu2_armel.deb) ... Unpacking replacement libss2:armel ... Setting up libss2:armel (1.42.5-1ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12171 files and directories currently installed.) Preparing to replace libdrm2:armel 2.4.37-0ubuntu2 (using .../libdrm2_2.4.38-0ubuntu2_armel.deb) ... Unpacking replacement libdrm2:armel ... Preparing to replace libdrm-nouveau1a:armel 2.4.37-0ubuntu2 (using .../libdrm-nouveau1a_2.4.38-0ubuntu2_armel.deb) ... Unpacking replacement libdrm-nouveau1a:armel ... Preparing to replace libdrm-radeon1:armel 2.4.37-0ubuntu2 (using .../libdrm-radeon1_2.4.38-0ubuntu2_armel.deb) ... Unpacking replacement libdrm-radeon1:armel ... Preparing to replace libglib2.0-0:armel 2.33.3-2 (using .../libglib2.0-0_2.33.10-0ubuntu3_armel.deb) ... Unpacking replacement libglib2.0-0:armel ... Preparing to replace libkms1:armel 2.4.37-0ubuntu2 (using .../libkms1_2.4.38-0ubuntu2_armel.deb) ... Unpacking replacement libkms1:armel ... Preparing to replace libprocps0:armel 1:3.3.3-2ubuntu2 (using .../libprocps0_1%3a3.3.3-2ubuntu3_armel.deb) ... Unpacking replacement libprocps0:armel ... Preparing to replace libk5crypto3:armel 1.10.1+dfsg-1 (using .../libk5crypto3_1.10.1+dfsg-2_armel.deb) ... Unpacking replacement libk5crypto3:armel ... Preparing to replace libgssapi-krb5-2:armel 1.10.1+dfsg-1 (using .../libgssapi-krb5-2_1.10.1+dfsg-2_armel.deb) ... Unpacking replacement libgssapi-krb5-2:armel ... Preparing to replace libkrb5-3:armel 1.10.1+dfsg-1 (using .../libkrb5-3_1.10.1+dfsg-2_armel.deb) ... Unpacking replacement libkrb5-3:armel ... Preparing to replace libkrb5support0:armel 1.10.1+dfsg-1 (using .../libkrb5support0_1.10.1+dfsg-2_armel.deb) ... Unpacking replacement libkrb5support0:armel ... Preparing to replace libsasl2-2:armel 2.1.25.dfsg1-4 (using .../libsasl2-2_2.1.25.dfsg1-4build1_armel.deb) ... Unpacking replacement libsasl2-2:armel ... Preparing to replace libldap-2.4-2:armel 2.4.28-1.1ubuntu4 (using .../libldap-2.4-2_2.4.31-1ubuntu2_armel.deb) ... Unpacking replacement libldap-2.4-2:armel ... Preparing to replace libcurl3-gnutls:armel 7.26.0-1ubuntu1 (using .../libcurl3-gnutls_7.27.0-1ubuntu1_armel.deb) ... Unpacking replacement libcurl3-gnutls:armel ... Preparing to replace libp11-kit0:armel 0.12-3ubuntu1 (using .../libp11-kit0_0.13-1_armel.deb) ... Unpacking replacement libp11-kit0:armel ... Preparing to replace multiarch-support 2.15-0ubuntu15 (using .../multiarch-support_2.15-0ubuntu17_armel.deb) ... Unpacking replacement multiarch-support ... Setting up multiarch-support (2.15-0ubuntu17) ... (Reading database ... 12171 files and directories currently installed.) Preparing to replace plymouth 0.8.4-0ubuntu1 (using .../plymouth_0.8.4-0ubuntu3_armel.deb) ... Unpacking replacement plymouth ... Preparing to replace libplymouth2 0.8.4-0ubuntu1 (using .../libplymouth2_0.8.4-0ubuntu3_armel.deb) ... Unpacking replacement libplymouth2 ... Preparing to replace procps 1:3.3.3-2ubuntu2 (using .../procps_1%3a3.3.3-2ubuntu3_armel.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace python2.7-minimal 2.7.3-0ubuntu3 (using .../python2.7-minimal_2.7.3-0ubuntu4_armel.deb) ... Unpacking replacement python2.7-minimal ... Preparing to replace apt-transport-https 0.9.7.1ubuntu1 (using .../apt-transport-https_0.9.7.1ubuntu2_armel.deb) ... Unpacking replacement apt-transport-https ... Preparing to replace make 3.81-8.1ubuntu1 (using .../make_3.81-8.2_armel.deb) ... Unpacking replacement make ... Setting up insserv (1.14.0-4ubuntu1) ... Setting up sysvinit-utils (2.88dsf-13.10ubuntu13) ... Setting up sysv-rc (2.88dsf-13.10ubuntu13) ... Setting up libdbus-1-3:armel (1.6.4-1ubuntu1) ... Setting up libc-dev-bin (2.15-0ubuntu17) ... Setting up linux-libc-dev:armel (3.5.0-11.11) ... Setting up libc6-dev:armel (2.15-0ubuntu17) ... Setting up libgomp1:armel (4.7.1-7ubuntu1) ... Setting up cpp-4.7 (4.7.1-7ubuntu1) ... Setting up binutils (2.22.90.20120816-2ubuntu1) ... Setting up gcc-4.7 (4.7.1-7ubuntu1) ... Setting up bzip2 (1.0.6-4) ... Setting up libdrm2:armel (2.4.38-0ubuntu2) ... Setting up libdrm-nouveau1a:armel (2.4.38-0ubuntu2) ... Setting up libdrm-radeon1:armel (2.4.38-0ubuntu2) ... Setting up libglib2.0-0:armel (2.33.10-0ubuntu3) ... No schema files found: doing nothing. Setting up libkms1:armel (2.4.38-0ubuntu2) ... Setting up libprocps0:armel (1:3.3.3-2ubuntu3) ... Setting up libkrb5support0:armel (1.10.1+dfsg-2) ... Setting up libk5crypto3:armel (1.10.1+dfsg-2) ... Setting up libkrb5-3:armel (1.10.1+dfsg-2) ... Setting up libgssapi-krb5-2:armel (1.10.1+dfsg-2) ... Setting up libsasl2-2:armel (2.1.25.dfsg1-4build1) ... Setting up libldap-2.4-2:armel (2.4.31-1ubuntu2) ... Setting up libcurl3-gnutls:armel (7.27.0-1ubuntu1) ... Setting up libp11-kit0:armel (0.13-1) ... Setting up libplymouth2 (0.8.4-0ubuntu3) ... Setting up python2.7-minimal (2.7.3-0ubuntu4) ... Setting up apt-transport-https (0.9.7.1ubuntu2) ... Setting up make (3.81-8.2) ... Setting up upstart (1.5-0ubuntu8) ... Setting up g++-4.7 (4.7.1-7ubuntu1) ... Setting up plymouth (0.8.4-0ubuntu3) ... update-initramfs: deferring update (trigger activated) Setting up initscripts (2.88dsf-13.10ubuntu13) ... Setting up libstdc++6-4.7-dev (4.7.1-7ubuntu1) ... Setting up procps (1:3.3.3-2ubuntu3) ... Installing new version of config file /etc/sysctl.d/10-magic-sysrq.conf ... invoke-rc.d: policy-rc.d denied execution of start. Processing triggers for libc-bin ... ldconfig deferred processing now taking place Processing triggers for initramfs-tools ... RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', 'a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849', 'armel', 'quantal', '--nolog', '--batch', '--archive=ubuntu', '--dist=quantal', '--purpose=PRIMARY', '--architecture=armel', '--comp=main', 'system-config-printer_1.3.11+20120807-0ubuntu2.dsc'] Initiating build a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849 with 2 jobs across 2 processor cores. Automatic build of system-config-printer_1.3.11+20120807-0ubuntu2 on musimon by sbuild/armel 1.170.5 Build started at 20120823-1723 ****************************************************************************** system-config-printer_1.3.11+20120807-0ubuntu2.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: cdbs (>= 0.4.43), debhelper (>= 5.0.37.2), dh-autoreconf, python-all-dev (>= 2.3.5-11), libxml-parser-perl, desktop-file-utils (>= 0.18-0ubuntu7), xmlto, libusb-1.0-0-dev, libudev-dev, libcups2-dev, libglib2.0-dev Checking for already installed source dependencies... cdbs: missing debhelper: missing dh-autoreconf: missing python-all-dev: missing libxml-parser-perl: missing desktop-file-utils: missing xmlto: missing libusb-1.0-0-dev: missing libudev-dev: missing libcups2-dev: missing libglib2.0-dev: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install cdbs debhelper dh-autoreconf python-all-dev libxml-parser-perl desktop-file-utils xmlto libusb-1.0-0-dev libudev-dev libcups2-dev libglib2.0-dev Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf automake autotools-dev bsdmainutils comerr-dev dh-apparmor dh-translations docbook-xml docbook-xsl file gettext gettext-base groff-base html2text intltool intltool-debian krb5-multidev libasprintf0c2 libavahi-client3 libavahi-common-data libavahi-common3 libcroco3 libcups2 libelf1 libencode-locale-perl libexpat1 libexpat1-dev libfile-listing-perl libgcrypt11-dev libgettextpo0 libglib2.0-bin libglib2.0-data libgnutls-dev libgnutls-openssl27 libgnutlsxx27 libgpg-error-dev libgssrpc4 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libio-socket-ssl-perl libkadm5clnt-mit8 libkadm5srv-mit8 libkdb5-6 libkrb5-dev liblwp-mediatypes-perl liblwp-protocol-https-perl libmagic1 libnet-http-perl libnet-ssleay-perl libp11-kit-dev libpcre3-dev libpcrecpp0 libpipeline1 libpopt0 libpython2.7 libssl-dev libtasn1-3-dev libtool libunistring0 liburi-perl libusb-1.0-0 libwww-perl libwww-robotrules-perl libxml2 libxml2-utils libxslt1.1 m4 man-db mime-support netbase pkg-config po-debconf python python-all python-dev python-scour python2.7 python2.7-dev sgml-base sgml-data xml-core xsltproc zlib1g-dev Suggested packages: autoconf2.13 autoconf-archive gnu-standards autoconf-doc wamerican wordlist whois vacation devscripts doc-base dh-make docbook docbook-dsssl docbook-defguide docbook-xsl-doc-html docbook-xsl-doc-pdf docbook-xsl-doc-text docbook-xsl-doc libsaxon-java libxalan2-java libxslthl-java docbook-xsl-saxon fop xalan dbtoepub gettext-doc groff krb5-doc cups-common libgcrypt11-doc libglib2.0-doc gnutls-doc gnutls-bin krb5-user libdata-dump-perl libcrypt-ssleay-perl libtool-doc automaken gfortran fortran95-compiler gcj libauthen-ntlm-perl less www-browser libmail-box-perl python-doc python-tk python-rsvg python-cairo python2.7-doc sgml-base-doc perlsgml w3-recs opensp xmltex Recommended packages: autopoint curl wget lynx-cur libhtml-format-perl libio-socket-ip-perl libio-socket-inet6-perl libssl-doc libltdl-dev libhtml-form-perl libhttp-daemon-perl libmailtools-perl libmail-sendmail-perl libpaper-utils zip The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils cdbs comerr-dev debhelper desktop-file-utils dh-apparmor dh-autoreconf dh-translations docbook-xml docbook-xsl file gettext gettext-base groff-base html2text intltool intltool-debian krb5-multidev libasprintf0c2 libavahi-client3 libavahi-common-data libavahi-common3 libcroco3 libcups2 libcups2-dev libelf1 libencode-locale-perl libexpat1 libexpat1-dev libfile-listing-perl libgcrypt11-dev libgettextpo0 libglib2.0-bin libglib2.0-data libglib2.0-dev libgnutls-dev libgnutls-openssl27 libgnutlsxx27 libgpg-error-dev libgssrpc4 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libio-socket-ssl-perl libkadm5clnt-mit8 libkadm5srv-mit8 libkdb5-6 libkrb5-dev liblwp-mediatypes-perl liblwp-protocol-https-perl libmagic1 libnet-http-perl libnet-ssleay-perl libp11-kit-dev libpcre3-dev libpcrecpp0 libpipeline1 libpopt0 libpython2.7 libssl-dev libtasn1-3-dev libtool libudev-dev libunistring0 liburi-perl libusb-1.0-0 libusb-1.0-0-dev libwww-perl libwww-robotrules-perl libxml-parser-perl libxml2 libxml2-utils libxslt1.1 m4 man-db mime-support netbase pkg-config po-debconf python python-all python-all-dev python-dev python-scour python2.7 python2.7-dev sgml-base sgml-data xml-core xmlto xsltproc zlib1g-dev 0 upgraded, 99 newly installed, 0 to remove and 0 not upgraded. Need to get 43.8 MB of archives. After this operation, 111 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libexpat1 libmagic1 libpopt0 libasprintf0c2 libelf1 libpipeline1 libusb-1.0-0 sgml-base xml-core sgml-data docbook-xml libavahi-common-data libavahi-common3 libavahi-client3 libxml2 libcroco3 libcups2 libunistring0 libgettextpo0 libglib2.0-data libglib2.0-bin libgnutls-openssl27 libgssrpc4 libkadm5clnt-mit8 libkdb5-6 libkadm5srv-mit8 libpcrecpp0 libxslt1.1 libgnutlsxx27 file mime-support netbase python2.7 python bsdmainutils gettext-base groff-base man-db m4 autoconf autotools-dev automake html2text gettext intltool-debian po-debconf dh-apparmor debhelper liburi-perl libencode-locale-perl libhttp-date-perl libfile-listing-perl libhtml-tagset-perl libhtml-parser-perl libhtml-tree-perl liblwp-mediatypes-perl libhttp-message-perl libhttp-cookies-perl libhttp-negotiate-perl libnet-ssleay-perl libio-socket-ssl-perl libnet-http-perl liblwp-protocol-https-perl libwww-robotrules-perl libwww-perl libxml-parser-perl intltool dh-translations python-scour cdbs desktop-file-utils libtool dh-autoreconf docbook-xsl comerr-dev krb5-multidev libgpg-error-dev libgcrypt11-dev zlib1g-dev libtasn1-3-dev libp11-kit-dev libgnutls-dev libkrb5-dev libcups2-dev libexpat1-dev libpcre3-dev pkg-config libglib2.0-dev libpython2.7 libssl-dev libudev-dev libusb-1.0-0-dev libxml2-utils python-all python2.7-dev python-dev python-all-dev xsltproc xmlto Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ quantal/main libexpat1 armel 2.1.0-1 [109 kB] Get:2 http://ftpmaster.internal/ubuntu/ quantal/main libmagic1 armel 5.11-2 [169 kB] Get:3 http://ftpmaster.internal/ubuntu/ quantal/main libpopt0 armel 1.16-7ubuntu1 [28.8 kB] Get:4 http://ftpmaster.internal/ubuntu/ quantal/main libasprintf0c2 armel 0.18.1.1-9ubuntu1 [6500 B] Get:5 http://ftpmaster.internal/ubuntu/ quantal/main libelf1 armel 0.153-1ubuntu1 [53.0 kB] Get:6 http://ftpmaster.internal/ubuntu/ quantal/main libpipeline1 armel 1.2.1-1 [20.7 kB] Get:7 http://ftpmaster.internal/ubuntu/ quantal/main libusb-1.0-0 armel 2:1.0.12-2 [34.6 kB] Get:8 http://ftpmaster.internal/ubuntu/ quantal/main sgml-base all 1.26+nmu3ubuntu1 [11.5 kB] Get:9 http://ftpmaster.internal/ubuntu/ quantal/main xml-core all 0.13+nmu1 [23.0 kB] Get:10 http://ftpmaster.internal/ubuntu/ quantal/main sgml-data all 2.0.8 [276 kB] Get:11 http://ftpmaster.internal/ubuntu/ quantal/main docbook-xml all 4.5-7ubuntu1 [336 kB] Get:12 http://ftpmaster.internal/ubuntu/ quantal/main libavahi-common-data armel 0.6.31-1ubuntu1 [21.5 kB] Get:13 http://ftpmaster.internal/ubuntu/ quantal/main libavahi-common3 armel 0.6.31-1ubuntu1 [25.4 kB] Get:14 http://ftpmaster.internal/ubuntu/ quantal/main libavahi-client3 armel 0.6.31-1ubuntu1 [26.8 kB] Get:15 http://ftpmaster.internal/ubuntu/ quantal/main libxml2 armel 2.8.0+dfsg1-5 [601 kB] Get:16 http://ftpmaster.internal/ubuntu/ quantal/main libcroco3 armel 0.6.5-1 [82.2 kB] Get:17 http://ftpmaster.internal/ubuntu/ quantal/main libcups2 armel 1.6.1-0ubuntu3 [178 kB] Get:18 http://ftpmaster.internal/ubuntu/ quantal/main libunistring0 armel 0.9.3-5 [394 kB] Get:19 http://ftpmaster.internal/ubuntu/ quantal/main libgettextpo0 armel 0.18.1.1-9ubuntu1 [111 kB] Get:20 http://ftpmaster.internal/ubuntu/ quantal/main libglib2.0-data all 2.33.10-0ubuntu3 [92.2 kB] Get:21 http://ftpmaster.internal/ubuntu/ quantal/main libglib2.0-bin armel 2.33.10-0ubuntu3 [39.8 kB] Get:22 http://ftpmaster.internal/ubuntu/ quantal/main libgnutls-openssl27 armel 2.12.14-5ubuntu4 [17.8 kB] Get:23 http://ftpmaster.internal/ubuntu/ quantal/main libgssrpc4 armel 1.10.1+dfsg-2 [50.9 kB] Get:24 http://ftpmaster.internal/ubuntu/ quantal/main libkadm5clnt-mit8 armel 1.10.1+dfsg-2 [33.6 kB] Get:25 http://ftpmaster.internal/ubuntu/ quantal/main libkdb5-6 armel 1.10.1+dfsg-2 [31.8 kB] Get:26 http://ftpmaster.internal/ubuntu/ quantal/main libkadm5srv-mit8 armel 1.10.1+dfsg-2 [47.6 kB] Get:27 http://ftpmaster.internal/ubuntu/ quantal/main libpcrecpp0 armel 1:8.30-5 [15.0 kB] Get:28 http://ftpmaster.internal/ubuntu/ quantal/main libxslt1.1 armel 1.1.26-13 [156 kB] Get:29 http://ftpmaster.internal/ubuntu/ quantal/main libgnutlsxx27 armel 2.12.14-5ubuntu4 [18.8 kB] Get:30 http://ftpmaster.internal/ubuntu/ quantal/main file armel 5.11-2 [17.9 kB] Get:31 http://ftpmaster.internal/ubuntu/ quantal/main mime-support all 3.52-1ubuntu1 [31.3 kB] Get:32 http://ftpmaster.internal/ubuntu/ quantal/main netbase all 5.0ubuntu1 [13.8 kB] Get:33 http://ftpmaster.internal/ubuntu/ quantal/main python2.7 armel 2.7.3-0ubuntu4 [2673 kB] Get:34 http://ftpmaster.internal/ubuntu/ quantal/main python armel 2.7.3-0ubuntu5 [168 kB] Get:35 http://ftpmaster.internal/ubuntu/ quantal/main bsdmainutils armel 9.0.3ubuntu1 [201 kB] Get:36 http://ftpmaster.internal/ubuntu/ quantal/main gettext-base armel 0.18.1.1-9ubuntu1 [54.0 kB] Get:37 http://ftpmaster.internal/ubuntu/ quantal/main groff-base armel 1.21-9 [967 kB] Get:38 http://ftpmaster.internal/ubuntu/ quantal/main man-db armel 2.6.2-1 [729 kB] Get:39 http://ftpmaster.internal/ubuntu/ quantal/main m4 armel 1.4.16-3 [188 kB] Get:40 http://ftpmaster.internal/ubuntu/ quantal/main autoconf all 2.69-1ubuntu1 [568 kB] Get:41 http://ftpmaster.internal/ubuntu/ quantal/main autotools-dev all 20120608.1 [42.9 kB] Get:42 http://ftpmaster.internal/ubuntu/ quantal/main automake all 1:1.11.5-2ubuntu1 [578 kB] Get:43 http://ftpmaster.internal/ubuntu/ quantal/main html2text armel 1.3.2a-15 [94.3 kB] Get:44 http://ftpmaster.internal/ubuntu/ quantal/main gettext armel 0.18.1.1-9ubuntu1 [1108 kB] Get:45 http://ftpmaster.internal/ubuntu/ quantal/main intltool-debian all 0.35.0+20060710.1 [31.6 kB] Get:46 http://ftpmaster.internal/ubuntu/ quantal/main po-debconf all 1.0.16+nmu2ubuntu1 [210 kB] Get:47 http://ftpmaster.internal/ubuntu/ quantal/main dh-apparmor all 2.8.0-0ubuntu2 [9684 B] Get:48 http://ftpmaster.internal/ubuntu/ quantal/main debhelper all 9.20120608ubuntu1 [623 kB] Get:49 http://ftpmaster.internal/ubuntu/ quantal/main liburi-perl all 1.60-1 [89.6 kB] Get:50 http://ftpmaster.internal/ubuntu/ quantal/main libencode-locale-perl all 1.03-1 [12.4 kB] Get:51 http://ftpmaster.internal/ubuntu/ quantal/main libhttp-date-perl all 6.02-1 [10.4 kB] Get:52 http://ftpmaster.internal/ubuntu/ quantal/main libfile-listing-perl all 6.04-1 [9774 B] Get:53 http://ftpmaster.internal/ubuntu/ quantal/main libhtml-tagset-perl all 3.20-2 [13.5 kB] Get:54 http://ftpmaster.internal/ubuntu/ quantal/main libhtml-parser-perl armel 3.69-2 [96.6 kB] Get:55 http://ftpmaster.internal/ubuntu/ quantal/main libhtml-tree-perl all 5.02-1 [213 kB] Get:56 http://ftpmaster.internal/ubuntu/ quantal/main liblwp-mediatypes-perl all 6.02-1 [21.7 kB] Get:57 http://ftpmaster.internal/ubuntu/ quantal/main libhttp-message-perl all 6.03-1 [77.6 kB] Get:58 http://ftpmaster.internal/ubuntu/ quantal/main libhttp-cookies-perl all 6.00-2 [23.3 kB] Get:59 http://ftpmaster.internal/ubuntu/ quantal/main libhttp-negotiate-perl all 6.00-2 [13.4 kB] Get:60 http://ftpmaster.internal/ubuntu/ quantal/main libnet-ssleay-perl armel 1.48-1 [301 kB] Get:61 http://ftpmaster.internal/ubuntu/ quantal/main libio-socket-ssl-perl all 1.76-1 [50.2 kB] Get:62 http://ftpmaster.internal/ubuntu/ quantal/main libnet-http-perl all 6.03-2 [24.0 kB] Get:63 http://ftpmaster.internal/ubuntu/ quantal/main liblwp-protocol-https-perl all 6.03-1 [7178 B] Get:64 http://ftpmaster.internal/ubuntu/ quantal/main libwww-robotrules-perl all 6.01-1 [14.1 kB] Get:65 http://ftpmaster.internal/ubuntu/ quantal/main libwww-perl all 6.04-1 [156 kB] Get:66 http://ftpmaster.internal/ubuntu/ quantal/main libxml-parser-perl armel 2.41-1build1 [304 kB] Get:67 http://ftpmaster.internal/ubuntu/ quantal/main intltool all 0.50.2-2 [52.0 kB] Get:68 http://ftpmaster.internal/ubuntu/ quantal/main dh-translations all 116 [21.6 kB] Get:69 http://ftpmaster.internal/ubuntu/ quantal/main python-scour all 0.26-3 [46.5 kB] Get:70 http://ftpmaster.internal/ubuntu/ quantal/main cdbs all 0.4.111ubuntu1 [48.3 kB] Get:71 http://ftpmaster.internal/ubuntu/ quantal/main desktop-file-utils armel 0.20-0ubuntu4 [59.9 kB] Get:72 http://ftpmaster.internal/ubuntu/ quantal/main libtool armel 2.4.2-1ubuntu1 [302 kB] Get:73 http://ftpmaster.internal/ubuntu/ quantal/main dh-autoreconf all 6 [15.3 kB] Get:74 http://ftpmaster.internal/ubuntu/ quantal/main docbook-xsl all 1.76.1+dfsg-1ubuntu1 [1533 kB] Get:75 http://ftpmaster.internal/ubuntu/ quantal/main comerr-dev armel 2.1-1.42.5-1ubuntu2 [43.0 kB] Get:76 http://ftpmaster.internal/ubuntu/ quantal/main krb5-multidev armel 1.10.1+dfsg-2 [125 kB] Get:77 http://ftpmaster.internal/ubuntu/ quantal/main libgpg-error-dev armel 1.10-3 [22.9 kB] Get:78 http://ftpmaster.internal/ubuntu/ quantal/main libgcrypt11-dev armel 1.5.0-3ubuntu1 [348 kB] Get:79 http://ftpmaster.internal/ubuntu/ quantal/main zlib1g-dev armel 1:1.2.7.dfsg-13 [177 kB] Get:80 http://ftpmaster.internal/ubuntu/ quantal/main libtasn1-3-dev armel 2.13-2 [351 kB] Get:81 http://ftpmaster.internal/ubuntu/ quantal/main libp11-kit-dev armel 0.13-1 [46.5 kB] Get:82 http://ftpmaster.internal/ubuntu/ quantal/main libgnutls-dev armel 2.12.14-5ubuntu4 [498 kB] Get:83 http://ftpmaster.internal/ubuntu/ quantal/main libkrb5-dev armel 1.10.1+dfsg-2 [11.1 kB] Get:84 http://ftpmaster.internal/ubuntu/ quantal/main libcups2-dev armel 1.6.1-0ubuntu3 [242 kB] Get:85 http://ftpmaster.internal/ubuntu/ quantal/main libexpat1-dev armel 2.1.0-1 [197 kB] Get:86 http://ftpmaster.internal/ubuntu/ quantal/main libpcre3-dev armel 1:8.30-5 [255 kB] Get:87 http://ftpmaster.internal/ubuntu/ quantal/main pkg-config armel 0.26-1ubuntu1 [38.0 kB] Get:88 http://ftpmaster.internal/ubuntu/ quantal/main libglib2.0-dev armel 2.33.10-0ubuntu3 [1631 kB] Get:89 http://ftpmaster.internal/ubuntu/ quantal/main libpython2.7 armel 2.7.3-0ubuntu4 [1099 kB] Get:90 http://ftpmaster.internal/ubuntu/ quantal/main libssl-dev armel 1.0.1c-3ubuntu1 [1335 kB] Get:91 http://ftpmaster.internal/ubuntu/ quantal/main libudev-dev armel 175-0ubuntu10 [59.1 kB] Get:92 http://ftpmaster.internal/ubuntu/ quantal/main libusb-1.0-0-dev armel 2:1.0.12-2 [179 kB] Get:93 http://ftpmaster.internal/ubuntu/ quantal/main libxml2-utils armel 2.8.0+dfsg1-5 [40.8 kB] Get:94 http://ftpmaster.internal/ubuntu/ quantal/main python-all armel 2.7.3-0ubuntu5 [916 B] Get:95 http://ftpmaster.internal/ubuntu/ quantal/main python2.7-dev armel 2.7.3-0ubuntu4 [22.2 MB] Get:96 http://ftpmaster.internal/ubuntu/ quantal/main python-dev armel 2.7.3-0ubuntu5 [1084 B] Get:97 http://ftpmaster.internal/ubuntu/ quantal/main python-all-dev armel 2.7.3-0ubuntu5 [930 B] Get:98 http://ftpmaster.internal/ubuntu/ quantal/main xsltproc armel 1.1.26-13 [15.2 kB] Get:99 http://ftpmaster.internal/ubuntu/ quantal/main xmlto armel 0.0.25-2 [30.5 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 43.8 MB in 13s (3338 kB/s) Selecting previously unselected package libexpat1:armel. (Reading database ... 12171 files and directories currently installed.) Unpacking libexpat1:armel (from .../libexpat1_2.1.0-1_armel.deb) ... Selecting previously unselected package libmagic1:armel. Unpacking libmagic1:armel (from .../libmagic1_5.11-2_armel.deb) ... Selecting previously unselected package libpopt0:armel. Unpacking libpopt0:armel (from .../libpopt0_1.16-7ubuntu1_armel.deb) ... Selecting previously unselected package libasprintf0c2:armel. Unpacking libasprintf0c2:armel (from .../libasprintf0c2_0.18.1.1-9ubuntu1_armel.deb) ... Selecting previously unselected package libelf1:armel. Unpacking libelf1:armel (from .../libelf1_0.153-1ubuntu1_armel.deb) ... Selecting previously unselected package libpipeline1:armel. Unpacking libpipeline1:armel (from .../libpipeline1_1.2.1-1_armel.deb) ... Selecting previously unselected package libusb-1.0-0:armel. Unpacking libusb-1.0-0:armel (from .../libusb-1.0-0_2%3a1.0.12-2_armel.deb) ... Selecting previously unselected package sgml-base. Unpacking sgml-base (from .../sgml-base_1.26+nmu3ubuntu1_all.deb) ... Selecting previously unselected package xml-core. Unpacking xml-core (from .../xml-core_0.13+nmu1_all.deb) ... Selecting previously unselected package sgml-data. Unpacking sgml-data (from .../sgml-data_2.0.8_all.deb) ... Setting up sgml-base (1.26+nmu3ubuntu1) ... Updating the super catalog... Setting up xml-core (0.13+nmu1) ... update-catalog: Suppressing action on super catalog. Invoking trigger instead. update-catalog: Please rebuild the package being set up with a version of debhelper fixing #477751. Processing triggers for sgml-base ... Updating the super catalog... Selecting previously unselected package docbook-xml. (Reading database ... 12463 files and directories currently installed.) Unpacking docbook-xml (from .../docbook-xml_4.5-7ubuntu1_all.deb) ... Selecting previously unselected package libavahi-common-data:armel. Unpacking libavahi-common-data:armel (from .../libavahi-common-data_0.6.31-1ubuntu1_armel.deb) ... Selecting previously unselected package libavahi-common3:armel. Unpacking libavahi-common3:armel (from .../libavahi-common3_0.6.31-1ubuntu1_armel.deb) ... Selecting previously unselected package libavahi-client3:armel. Unpacking libavahi-client3:armel (from .../libavahi-client3_0.6.31-1ubuntu1_armel.deb) ... Selecting previously unselected package libxml2:armel. Unpacking libxml2:armel (from .../libxml2_2.8.0+dfsg1-5_armel.deb) ... Selecting previously unselected package libcroco3:armel. Unpacking libcroco3:armel (from .../libcroco3_0.6.5-1_armel.deb) ... Selecting previously unselected package libcups2:armel. Unpacking libcups2:armel (from .../libcups2_1.6.1-0ubuntu3_armel.deb) ... Selecting previously unselected package libunistring0:armel. Unpacking libunistring0:armel (from .../libunistring0_0.9.3-5_armel.deb) ... Selecting previously unselected package libgettextpo0:armel. Unpacking libgettextpo0:armel (from .../libgettextpo0_0.18.1.1-9ubuntu1_armel.deb) ... Selecting previously unselected package libglib2.0-data. Unpacking libglib2.0-data (from .../libglib2.0-data_2.33.10-0ubuntu3_all.deb) ... Selecting previously unselected package libglib2.0-bin. Unpacking libglib2.0-bin (from .../libglib2.0-bin_2.33.10-0ubuntu3_armel.deb) ... Selecting previously unselected package libgnutls-openssl27:armel. Unpacking libgnutls-openssl27:armel (from .../libgnutls-openssl27_2.12.14-5ubuntu4_armel.deb) ... Selecting previously unselected package libgssrpc4:armel. Unpacking libgssrpc4:armel (from .../libgssrpc4_1.10.1+dfsg-2_armel.deb) ... Selecting previously unselected package libkadm5clnt-mit8:armel. Unpacking libkadm5clnt-mit8:armel (from .../libkadm5clnt-mit8_1.10.1+dfsg-2_armel.deb) ... Selecting previously unselected package libkdb5-6:armel. Unpacking libkdb5-6:armel (from .../libkdb5-6_1.10.1+dfsg-2_armel.deb) ... Selecting previously unselected package libkadm5srv-mit8:armel. Unpacking libkadm5srv-mit8:armel (from .../libkadm5srv-mit8_1.10.1+dfsg-2_armel.deb) ... Selecting previously unselected package libpcrecpp0:armel. Unpacking libpcrecpp0:armel (from .../libpcrecpp0_1%3a8.30-5_armel.deb) ... Selecting previously unselected package libxslt1.1:armel. Unpacking libxslt1.1:armel (from .../libxslt1.1_1.1.26-13_armel.deb) ... Selecting previously unselected package libgnutlsxx27:armel. Unpacking libgnutlsxx27:armel (from .../libgnutlsxx27_2.12.14-5ubuntu4_armel.deb) ... Selecting previously unselected package file. Unpacking file (from .../archives/file_5.11-2_armel.deb) ... Selecting previously unselected package mime-support. Unpacking mime-support (from .../mime-support_3.52-1ubuntu1_all.deb) ... Selecting previously unselected package netbase. Unpacking netbase (from .../netbase_5.0ubuntu1_all.deb) ... Selecting previously unselected package python2.7. Unpacking python2.7 (from .../python2.7_2.7.3-0ubuntu4_armel.deb) ... Selecting previously unselected package python. Unpacking python (from .../python_2.7.3-0ubuntu5_armel.deb) ... Selecting previously unselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_9.0.3ubuntu1_armel.deb) ... Selecting previously unselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.18.1.1-9ubuntu1_armel.deb) ... Selecting previously unselected package groff-base. Unpacking groff-base (from .../groff-base_1.21-9_armel.deb) ... Selecting previously unselected package man-db. Unpacking man-db (from .../man-db_2.6.2-1_armel.deb) ... Selecting previously unselected package m4. Unpacking m4 (from .../archives/m4_1.4.16-3_armel.deb) ... Selecting previously unselected package autoconf. Unpacking autoconf (from .../autoconf_2.69-1ubuntu1_all.deb) ... Selecting previously unselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20120608.1_all.deb) ... Selecting previously unselected package automake. Unpacking automake (from .../automake_1%3a1.11.5-2ubuntu1_all.deb) ... Selecting previously unselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-15_armel.deb) ... Selecting previously unselected package gettext. Unpacking gettext (from .../gettext_0.18.1.1-9ubuntu1_armel.deb) ... Selecting previously unselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously unselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16+nmu2ubuntu1_all.deb) ... Selecting previously unselected package dh-apparmor. Unpacking dh-apparmor (from .../dh-apparmor_2.8.0-0ubuntu2_all.deb) ... Selecting previously unselected package debhelper. Unpacking debhelper (from .../debhelper_9.20120608ubuntu1_all.deb) ... Selecting previously unselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.60-1_all.deb) ... Selecting previously unselected package libencode-locale-perl. Unpacking libencode-locale-perl (from .../libencode-locale-perl_1.03-1_all.deb) ... Selecting previously unselected package libhttp-date-perl. Unpacking libhttp-date-perl (from .../libhttp-date-perl_6.02-1_all.deb) ... Selecting previously unselected package libfile-listing-perl. Unpacking libfile-listing-perl (from .../libfile-listing-perl_6.04-1_all.deb) ... Selecting previously unselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously unselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.69-2_armel.deb) ... Selecting previously unselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_5.02-1_all.deb) ... Selecting previously unselected package liblwp-mediatypes-perl. Unpacking liblwp-mediatypes-perl (from .../liblwp-mediatypes-perl_6.02-1_all.deb) ... Selecting previously unselected package libhttp-message-perl. Unpacking libhttp-message-perl (from .../libhttp-message-perl_6.03-1_all.deb) ... Selecting previously unselected package libhttp-cookies-perl. Unpacking libhttp-cookies-perl (from .../libhttp-cookies-perl_6.00-2_all.deb) ... Selecting previously unselected package libhttp-negotiate-perl. Unpacking libhttp-negotiate-perl (from .../libhttp-negotiate-perl_6.00-2_all.deb) ... Selecting previously unselected package libnet-ssleay-perl. Unpacking libnet-ssleay-perl (from .../libnet-ssleay-perl_1.48-1_armel.deb) ... Selecting previously unselected package libio-socket-ssl-perl. Unpacking libio-socket-ssl-perl (from .../libio-socket-ssl-perl_1.76-1_all.deb) ... Selecting previously unselected package libnet-http-perl. Unpacking libnet-http-perl (from .../libnet-http-perl_6.03-2_all.deb) ... Selecting previously unselected package liblwp-protocol-https-perl. Unpacking liblwp-protocol-https-perl (from .../liblwp-protocol-https-perl_6.03-1_all.deb) ... Selecting previously unselected package libwww-robotrules-perl. Unpacking libwww-robotrules-perl (from .../libwww-robotrules-perl_6.01-1_all.deb) ... Selecting previously unselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_6.04-1_all.deb) ... Selecting previously unselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.41-1build1_armel.deb) ... Selecting previously unselected package intltool. Unpacking intltool (from .../intltool_0.50.2-2_all.deb) ... Selecting previously unselected package dh-translations. Unpacking dh-translations (from .../dh-translations_116_all.deb) ... Selecting previously unselected package python-scour. Unpacking python-scour (from .../python-scour_0.26-3_all.deb) ... Selecting previously unselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.111ubuntu1_all.deb) ... Selecting previously unselected package desktop-file-utils. Unpacking desktop-file-utils (from .../desktop-file-utils_0.20-0ubuntu4_armel.deb) ... Selecting previously unselected package libtool. Unpacking libtool (from .../libtool_2.4.2-1ubuntu1_armel.deb) ... Selecting previously unselected package dh-autoreconf. Unpacking dh-autoreconf (from .../dh-autoreconf_6_all.deb) ... Selecting previously unselected package docbook-xsl. Unpacking docbook-xsl (from .../docbook-xsl_1.76.1+dfsg-1ubuntu1_all.deb) ... Selecting previously unselected package comerr-dev. Unpacking comerr-dev (from .../comerr-dev_2.1-1.42.5-1ubuntu2_armel.deb) ... Selecting previously unselected package krb5-multidev. Unpacking krb5-multidev (from .../krb5-multidev_1.10.1+dfsg-2_armel.deb) ... Selecting previously unselected package libgpg-error-dev. Unpacking libgpg-error-dev (from .../libgpg-error-dev_1.10-3_armel.deb) ... Selecting previously unselected package libgcrypt11-dev. Unpacking libgcrypt11-dev (from .../libgcrypt11-dev_1.5.0-3ubuntu1_armel.deb) ... Selecting previously unselected package zlib1g-dev:armel. Unpacking zlib1g-dev:armel (from .../zlib1g-dev_1%3a1.2.7.dfsg-13_armel.deb) ... Selecting previously unselected package libtasn1-3-dev. Unpacking libtasn1-3-dev (from .../libtasn1-3-dev_2.13-2_armel.deb) ... Selecting previously unselected package libp11-kit-dev. Unpacking libp11-kit-dev (from .../libp11-kit-dev_0.13-1_armel.deb) ... Selecting previously unselected package libgnutls-dev. Unpacking libgnutls-dev (from .../libgnutls-dev_2.12.14-5ubuntu4_armel.deb) ... Selecting previously unselected package libkrb5-dev. Unpacking libkrb5-dev (from .../libkrb5-dev_1.10.1+dfsg-2_armel.deb) ... Selecting previously unselected package libcups2-dev. Unpacking libcups2-dev (from .../libcups2-dev_1.6.1-0ubuntu3_armel.deb) ... Selecting previously unselected package libexpat1-dev. Unpacking libexpat1-dev (from .../libexpat1-dev_2.1.0-1_armel.deb) ... Selecting previously unselected package libpcre3-dev. Unpacking libpcre3-dev (from .../libpcre3-dev_1%3a8.30-5_armel.deb) ... Selecting previously unselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.26-1ubuntu1_armel.deb) ... Selecting previously unselected package libglib2.0-dev. Unpacking libglib2.0-dev (from .../libglib2.0-dev_2.33.10-0ubuntu3_armel.deb) ... Selecting previously unselected package libpython2.7. Unpacking libpython2.7 (from .../libpython2.7_2.7.3-0ubuntu4_armel.deb) ... Selecting previously unselected package libssl-dev. Unpacking libssl-dev (from .../libssl-dev_1.0.1c-3ubuntu1_armel.deb) ... Selecting previously unselected package libudev-dev. Unpacking libudev-dev (from .../libudev-dev_175-0ubuntu10_armel.deb) ... Selecting previously unselected package libusb-1.0-0-dev. Unpacking libusb-1.0-0-dev (from .../libusb-1.0-0-dev_2%3a1.0.12-2_armel.deb) ... Selecting previously unselected package libxml2-utils. Unpacking libxml2-utils (from .../libxml2-utils_2.8.0+dfsg1-5_armel.deb) ... Selecting previously unselected package python-all. Unpacking python-all (from .../python-all_2.7.3-0ubuntu5_armel.deb) ... Selecting previously unselected package python2.7-dev. Unpacking python2.7-dev (from .../python2.7-dev_2.7.3-0ubuntu4_armel.deb) ... Selecting previously unselected package python-dev. Unpacking python-dev (from .../python-dev_2.7.3-0ubuntu5_armel.deb) ... Selecting previously unselected package python-all-dev. Unpacking python-all-dev (from .../python-all-dev_2.7.3-0ubuntu5_armel.deb) ... Selecting previously unselected package xsltproc. Unpacking xsltproc (from .../xsltproc_1.1.26-13_armel.deb) ... Selecting previously unselected package xmlto. Unpacking xmlto (from .../xmlto_0.0.25-2_armel.deb) ... Processing triggers for sgml-base ... Updating the super catalog... Processing triggers for libglib2.0-0:armel ... No schema files found: doing nothing. Setting up libexpat1:armel (2.1.0-1) ... Setting up libmagic1:armel (5.11-2) ... Setting up libpopt0:armel (1.16-7ubuntu1) ... Setting up libasprintf0c2:armel (0.18.1.1-9ubuntu1) ... Setting up libelf1:armel (0.153-1ubuntu1) ... Setting up libpipeline1:armel (1.2.1-1) ... Setting up libusb-1.0-0:armel (2:1.0.12-2) ... Setting up sgml-data (2.0.8) ... Setting up libavahi-common-data:armel (0.6.31-1ubuntu1) ... Setting up libavahi-common3:armel (0.6.31-1ubuntu1) ... Setting up libavahi-client3:armel (0.6.31-1ubuntu1) ... Setting up libxml2:armel (2.8.0+dfsg1-5) ... Setting up libcroco3:armel (0.6.5-1) ... Setting up libcups2:armel (1.6.1-0ubuntu3) ... Setting up libunistring0:armel (0.9.3-5) ... Setting up libgettextpo0:armel (0.18.1.1-9ubuntu1) ... Setting up libglib2.0-data (2.33.10-0ubuntu3) ... Setting up libglib2.0-bin (2.33.10-0ubuntu3) ... Setting up libgnutls-openssl27:armel (2.12.14-5ubuntu4) ... Setting up libgssrpc4:armel (1.10.1+dfsg-2) ... Setting up libkadm5clnt-mit8:armel (1.10.1+dfsg-2) ... Setting up libkdb5-6:armel (1.10.1+dfsg-2) ... Setting up libkadm5srv-mit8:armel (1.10.1+dfsg-2) ... Setting up libpcrecpp0:armel (1:8.30-5) ... Setting up libxslt1.1:armel (1.1.26-13) ... Setting up libgnutlsxx27:armel (2.12.14-5ubuntu4) ... Setting up file (5.11-2) ... Setting up mime-support (3.52-1ubuntu1) ... update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode Setting up netbase (5.0ubuntu1) ... Setting up python2.7 (2.7.3-0ubuntu4) ... Setting up python (2.7.3-0ubuntu5) ... Setting up bsdmainutils (9.0.3ubuntu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up gettext-base (0.18.1.1-9ubuntu1) ... Setting up groff-base (1.21-9) ... Setting up man-db (2.6.2-1) ... Building database of manual pages ... Setting up m4 (1.4.16-3) ... Setting up autoconf (2.69-1ubuntu1) ... Setting up autotools-dev (20120608.1) ... Setting up automake (1:1.11.5-2ubuntu1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode Setting up html2text (1.3.2a-15) ... Setting up gettext (0.18.1.1-9ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16+nmu2ubuntu1) ... Setting up dh-apparmor (2.8.0-0ubuntu2) ... Setting up debhelper (9.20120608ubuntu1) ... Setting up liburi-perl (1.60-1) ... Setting up libencode-locale-perl (1.03-1) ... Setting up libhttp-date-perl (6.02-1) ... Setting up libfile-listing-perl (6.04-1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up libhtml-parser-perl (3.69-2) ... Setting up libhtml-tree-perl (5.02-1) ... Setting up liblwp-mediatypes-perl (6.02-1) ... Setting up libhttp-message-perl (6.03-1) ... Setting up libhttp-cookies-perl (6.00-2) ... Setting up libhttp-negotiate-perl (6.00-2) ... Setting up libnet-ssleay-perl (1.48-1) ... Setting up libio-socket-ssl-perl (1.76-1) ... Setting up libnet-http-perl (6.03-2) ... Setting up libwww-robotrules-perl (6.01-1) ... Setting up python-scour (0.26-3) ... Setting up desktop-file-utils (0.20-0ubuntu4) ... Setting up libtool (2.4.2-1ubuntu1) ... Setting up dh-autoreconf (6) ... Setting up docbook-xsl (1.76.1+dfsg-1ubuntu1) ... Setting up comerr-dev (2.1-1.42.5-1ubuntu2) ... Setting up krb5-multidev (1.10.1+dfsg-2) ... Setting up libgpg-error-dev (1.10-3) ... Setting up libgcrypt11-dev (1.5.0-3ubuntu1) ... Setting up zlib1g-dev:armel (1:1.2.7.dfsg-13) ... Setting up libtasn1-3-dev (2.13-2) ... Setting up libp11-kit-dev (0.13-1) ... Setting up libgnutls-dev (2.12.14-5ubuntu4) ... Setting up libkrb5-dev (1.10.1+dfsg-2) ... Setting up libcups2-dev (1.6.1-0ubuntu3) ... Setting up libexpat1-dev (2.1.0-1) ... Setting up libpcre3-dev (1:8.30-5) ... Setting up pkg-config (0.26-1ubuntu1) ... Setting up libglib2.0-dev (2.33.10-0ubuntu3) ... Setting up libpython2.7 (2.7.3-0ubuntu4) ... Setting up libssl-dev (1.0.1c-3ubuntu1) ... Setting up libudev-dev (175-0ubuntu10) ... Setting up libusb-1.0-0-dev (2:1.0.12-2) ... Setting up libxml2-utils (2.8.0+dfsg1-5) ... Setting up python-all (2.7.3-0ubuntu5) ... Setting up python2.7-dev (2.7.3-0ubuntu4) ... Setting up python-dev (2.7.3-0ubuntu5) ... Setting up python-all-dev (2.7.3-0ubuntu5) ... Setting up xsltproc (1.1.26-13) ... Processing triggers for sgml-base ... Updating the super catalog... Setting up docbook-xml (4.5-7ubuntu1) ... update-catalog: Suppressing action on super catalog. Invoking trigger instead. update-catalog: Please rebuild the package being set up with a version of debhelper fixing #477751. Processing triggers for sgml-base ... Updating the super catalog... Setting up xmlto (0.0.25-2) ... Setting up liblwp-protocol-https-perl (6.03-1) ... Setting up libwww-perl (6.04-1) ... Setting up libxml-parser-perl (2.41-1build1) ... Setting up intltool (0.50.2-2) ... Setting up dh-translations (116) ... Setting up cdbs (0.4.111ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.15-0ubuntu17 make_3.81-8.2 dpkg-dev_1.16.7ubuntu3 gcc-4.7_4.7.1-7ubuntu1 g++-4.7_4.7.1-7ubuntu1 binutils_2.22.90.20120816-2ubuntu1 libstdc++6-4.7-dev_4.7.1-7ubuntu1 libstdc++6_4.7.1-7ubuntu1 ------------------------------------------------------------------------------ gpgv: Signature made Thu Aug 23 17:05:52 2012 UTC using DSA key ID 5FDC2849 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./system-config-printer_1.3.11+20120807-0ubuntu2.dsc dpkg-source: info: extracting system-config-printer in system-config-printer-1.3.11+20120807 dpkg-source: info: unpacking system-config-printer_1.3.11+20120807.orig.tar.gz dpkg-source: info: applying system-config-printer_1.3.11+20120807-0ubuntu2.diff.gz dpkg-buildpackage: source package system-config-printer dpkg-buildpackage: source version 1.3.11+20120807-0ubuntu2 dpkg-source --before-build system-config-printer-1.3.11+20120807 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean /usr/share/cdbs/1/rules/simple-patchsys.mk:31: WARNING: simple-patchsys.mk is deprecated - please use source format 3.0 (quilt) instead test -x debian/rules dh_testroot rm -f debian/stamp-makefile-build debian/stamp-makefile-install GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 /usr/bin/make -C . -k distclean make[1]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807' make[1]: *** No rule to make target `distclean'. make[1]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-autotools rmdir --ignore-fail-on-non-empty . rmdir: failed to remove `.': Invalid argument make: [makefile-clean] Error 1 (ignored) /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807' /usr/share/cdbs/1/rules/simple-patchsys.mk:31: WARNING: simple-patchsys.mk is deprecated - please use source format 3.0 (quilt) instead for i in ./config.guess ./config.sub ./config.rpath ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done dh_autoreconf_clean make[1]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807' if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/03_install_layout.patch debian/patches/05_menu_entries.patch debian/patches/07_allow-also-nonfree-ppds-for-single-ppd-download.patch debian/patches/13_use-paper-size-default-in-etc-papersize.patch debian/patches/15_cupshelpers-openprinting-query-fingerprint-support.patch debian/patches/21_nodisplay_autostart.patch debian/patches/23_applet-also-do-not-autostart-on-unity-and-gnome.patch debian/patches/27_disable-policy-kit-support.patch debian/patches/30_driver-autodownload.patch debian/patches/67_no-misleading-prompt-and-root-default-in-auth-dialogs.patch Patch debian/patches/67_no-misleading-prompt-and-root-default-in-auth-dialogs.patch is not applied. Patch debian/patches/30_driver-autodownload.patch is not applied. Patch debian/patches/27_disable-policy-kit-support.patch is not applied. Patch debian/patches/23_applet-also-do-not-autostart-on-unity-and-gnome.patch is not applied. Patch debian/patches/21_nodisplay_autostart.patch is not applied. Patch debian/patches/15_cupshelpers-openprinting-query-fingerprint-support.patch is not applied. Patch debian/patches/13_use-paper-size-default-in-etc-papersize.patch is not applied. Patch debian/patches/07_allow-also-nonfree-ppds-for-single-ppd-download.patch is not applied. Patch debian/patches/05_menu_entries.patch is not applied. Patch debian/patches/03_install_layout.patch is not applied. if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "reverse-patches" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi for dir in debian/patches ; do \ rm -f $dir/*.log ; \ done for i in ./config.guess ./config.sub ./config.rpath ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done dh_autoreconf_clean dh_clean rm -f debian/stamp-autotools-files cd . && \ rm -f intltool-extract intltool-merge intltool-update po/.intltool-merge-cache; \ if test -d doc; then find doc -name '*.omf.out' -exec rm -f \{\} \; ; fi; \ if test -d help; then find help -name '*.omf.out' -exec rm -f \{\} \; ; fi debian/rules build-arch /usr/share/cdbs/1/rules/simple-patchsys.mk:31: WARNING: simple-patchsys.mk is deprecated - please use source format 3.0 (quilt) instead test -x debian/rules mkdir -p "." /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807' /usr/share/cdbs/1/rules/simple-patchsys.mk:31: WARNING: simple-patchsys.mk is deprecated - please use source format 3.0 (quilt) instead for i in ./config.guess ./config.sub ./config.rpath ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done dh_autoreconf_clean make[1]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/03_install_layout.patch debian/patches/05_menu_entries.patch debian/patches/07_allow-also-nonfree-ppds-for-single-ppd-download.patch debian/patches/13_use-paper-size-default-in-etc-papersize.patch debian/patches/15_cupshelpers-openprinting-query-fingerprint-support.patch debian/patches/21_nodisplay_autostart.patch debian/patches/23_applet-also-do-not-autostart-on-unity-and-gnome.patch debian/patches/27_disable-policy-kit-support.patch debian/patches/30_driver-autodownload.patch debian/patches/67_no-misleading-prompt-and-root-default-in-auth-dialogs.patch Trying patch debian/patches/03_install_layout.patch at level 1 ... success. Trying patch debian/patches/05_menu_entries.patch at level 1 ... success. Trying patch debian/patches/07_allow-also-nonfree-ppds-for-single-ppd-download.patch at level 1 ... success. Trying patch debian/patches/13_use-paper-size-default-in-etc-papersize.patch at level 1 ... success. Trying patch debian/patches/15_cupshelpers-openprinting-query-fingerprint-support.patch at level 1 ... success. Trying patch debian/patches/21_nodisplay_autostart.patch at level 1 ... success. Trying patch debian/patches/23_applet-also-do-not-autostart-on-unity-and-gnome.patch at level 1 ... success. Trying patch debian/patches/27_disable-policy-kit-support.patch at level 1 ... success. Trying patch debian/patches/30_driver-autodownload.patch at level 1 ... success. Trying patch debian/patches/67_no-misleading-prompt-and-root-default-in-auth-dialogs.patch at level 1 ... success. if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi make[1]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807' /usr/share/cdbs/1/rules/simple-patchsys.mk:31: WARNING: simple-patchsys.mk is deprecated - please use source format 3.0 (quilt) instead if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi if test -e /usr/share/gnulib/build-aux/config.rpath ; then \ for i in ./config.rpath ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/gnulib/build-aux/config.rpath $i ; \ fi ; \ done ; \ fi make[1]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807' if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi if test -e /usr/share/gnulib/build-aux/config.rpath ; then \ for i in ./config.rpath ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/gnulib/build-aux/config.rpath $i ; \ fi ; \ done ; \ fi dh_autoreconf autoreconf: configure.in: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION Makefile.am:195: `%'-style pattern rules are a GNU make extension Makefile.am:1: `CFLAGS' is a user variable, you should not override it; Makefile.am:1: use `AM_CFLAGS' instead. touch debian/stamp-autotools-files chmod a+x /build/buildd/system-config-printer-1.3.11+20120807/./configure mkdir -p . cd . && CFLAGS="-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall" CXXFLAGS="-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall" CPPFLAGS="-D_FORTIFY_SOURCE=2" LDFLAGS="-Wl,-Bsymbolic-functions -Wl,-z,relro" /build/buildd/system-config-printer-1.3.11+20120807/./configure --build=arm-linux-gnueabi --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/system-config-printer" --srcdir=. --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules --sbindir=/usr/bin --with-udev-rules configure: WARNING: unrecognized options: --disable-maintainer-mode, --disable-silent-rules checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether NLS is requested... yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... none checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.14.2 checking for XML::Parser... ok checking for msgfmt... (cached) /usr/bin/msgfmt checking for gmsgfmt... (cached) /usr/bin/msgfmt checking for xgettext... (cached) /usr/bin/xgettext checking for msgmerge... (cached) /usr/bin/msgmerge checking build system type... arm-unknown-linux-gnueabi checking host system type... arm-unknown-linux-gnueabi checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for python... /usr/bin/python checking for python version... 2.7 checking for python platform... linux2 checking for python script directory... ${prefix}/lib/python2.7/dist-packages checking for python extension module directory... ${exec_prefix}/lib/python2.7/dist-packages checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking for libudev... yes checking for libusb... yes checking whether gcc and cc understand -c and -o together... yes checking for pkg-config... (cached) /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating system-config-printer config.status: creating system-config-printer-applet config.status: creating dbus/scp-dbus-service config.status: executing depfiles commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing po/stamp-it commands configure: WARNING: unrecognized options: --disable-maintainer-mode, --disable-silent-rules touch debian/stamp-autotools GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 /usr/bin/make -C . make[1]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807' Making all in po make[2]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807/po' file=`echo ar | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ar.po file=`echo as | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file as.po file=`echo bg | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bg.po file=`echo bn_IN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bn_IN.po file=`echo bn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bn.po file=`echo br | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file br.po file=`echo bs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bs.po file=`echo ca | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ca.po file=`echo cs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file cs.po file=`echo cy | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file cy.po file=`echo da | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file da.po file=`echo de | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file de.po file=`echo el | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file el.po file=`echo en_GB | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file en_GB.po file=`echo es | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file es.po file=`echo et | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file et.po file=`echo fa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fa.po file=`echo fi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fi.po file=`echo fr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fr.po file=`echo gu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file gu.po file=`echo he | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file he.po file=`echo hi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hi.po file=`echo hr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hr.po file=`echo hu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hu.po file=`echo hy | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hy.po file=`echo id | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file id.po file=`echo is | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file is.po file=`echo it | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file it.po file=`echo ja | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ja.po file=`echo ka | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ka.po file=`echo kn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file kn.po file=`echo ko | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ko.po file=`echo lo | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file lo.po file=`echo lv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file lv.po file=`echo mai | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file mai.po file=`echo mk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file mk.po file=`echo ml | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ml.po file=`echo mr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file mr.po file=`echo ms | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ms.po file=`echo my | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file my.po file=`echo nb | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nb.po file=`echo nds | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nds.po file=`echo nl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nl.po file=`echo nn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nn.po file=`echo or | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file or.po file=`echo pa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pa.po file=`echo pl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pl.po file=`echo pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pt_BR.po file=`echo pt | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pt.po file=`echo ro | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ro.po file=`echo ru | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ru.po file=`echo si | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file si.po file=`echo sk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sk.po file=`echo sl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sl.po file=`echo sr@latin | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sr@latin.po file=`echo sr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sr.po file=`echo sv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sv.po file=`echo ta | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ta.po file=`echo te | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file te.po file=`echo th | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file th.po file=`echo tr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file tr.po file=`echo uk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file uk.po file=`echo vi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file vi.po file=`echo zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file zh_CN.po file=`echo zh_TW | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file zh_TW.po make[2]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807/po' make[2]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807' gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.3.11\" -DPACKAGE_STRING=\"system-config-printer\ 1.3.11\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.3.11\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -D_FORTIFY_SOURCE=2 -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabi/glib-2.0/include -g -O2 -Wall -c -o udev/udev_udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c udev/udev-configure-printer.c: In function 'device_id_from_devpath': udev/udev-configure-printer.c:705:4: warning: format '%zX' expects argument of type 'size_t', but argument 3 has type 'long unsigned int' [-Wformat] udev/udev-configure-printer.c:705:4: warning: format '%zX' expects argument of type 'size_t', but argument 4 has type 'long unsigned int' [-Wformat] gcc -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabi/glib-2.0/include -g -O2 -Wall -Wl,-Bsymbolic-functions -Wl,-z,relro -o udev/udev-configure-printer udev/udev_udev_configure_printer-udev-configure-printer.o -lcups -ludev -lusb-1.0 -lglib-2.0 xmlto man -o man man/system-config-printer.xml Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see see http://docbook.sf.net/el/contrib Note: AUTHOR sect.: see see http://docbook.sf.net/el/personblurb Note: Writing system-config-printer.1 Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see see http://docbook.sf.net/el/contrib Note: AUTHOR sect.: see see http://docbook.sf.net/el/personblurb Note: Writing system-config-printer-applet.1 LC_ALL=C /usr/bin/intltool-merge -d -u -c ./po/.intltool-merge-cache ./po system-config-printer.desktop.in system-config-printer.desktop Generating and caching the translation database Merging translations into system-config-printer.desktop. LC_ALL=C /usr/bin/intltool-merge -d -u -c ./po/.intltool-merge-cache ./po print-applet.desktop.in print-applet.desktop Found cached translation database Merging translations into print-applet.desktop. sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@datadir\@|/usr/share|" \ -e "s|\@localedir\@|/usr/share/locale|" \ -e "s|\@VERSION\@|1.3.11|" \ -e "s|\@PACKAGE\@|system-config-printer|" \ config.py.in > config.py if [ "." != "." ]; then \ cp ./setup.py .; \ /bin/mkdir -p cupshelpers; \ for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do \ cp ./$file $file; \ done; \ fi touch .stamp-distutils-in-builddir /bin/mkdir -p cupshelpers sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py /usr/bin/python setup.py build running build running build_py creating build creating build/lib.linux-armv7l-2.7 creating build/lib.linux-armv7l-2.7/cupshelpers copying cupshelpers/cupshelpers.py -> build/lib.linux-armv7l-2.7/cupshelpers copying cupshelpers/config.py -> build/lib.linux-armv7l-2.7/cupshelpers copying cupshelpers/__init__.py -> build/lib.linux-armv7l-2.7/cupshelpers copying cupshelpers/installdriver.py -> build/lib.linux-armv7l-2.7/cupshelpers copying cupshelpers/ppds.py -> build/lib.linux-armv7l-2.7/cupshelpers copying cupshelpers/xmldriverprefs.py -> build/lib.linux-armv7l-2.7/cupshelpers copying cupshelpers/openprinting.py -> build/lib.linux-armv7l-2.7/cupshelpers make[2]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807' make[1]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807' touch debian/stamp-makefile-build DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/fakeroot debian/rules binary-arch /usr/share/cdbs/1/rules/simple-patchsys.mk:31: WARNING: simple-patchsys.mk is deprecated - please use source format 3.0 (quilt) instead test -x debian/rules dh_testroot dh_clean -k dh_clean: dh_clean -k is deprecated; use dh_prep instead dh_installdirs -A mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi if test -e /usr/share/gnulib/build-aux/config.rpath ; then \ for i in ./config.rpath ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/gnulib/build-aux/config.rpath $i ; \ fi ; \ done ; \ fi DEB_MAKE_CHECK_TARGET unset, not running checks GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 /usr/bin/make -C . install DESTDIR=/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/ udevrulesdir=/lib/udev/rules.d udevhelperdir=/lib/udev make[1]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807' Making install in po make[2]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807/po' linguas="ar as bg bn_IN bn br bs ca cs cy da de el en_GB es et fa fi fr gu he hi hr hu hy id is it ja ka kn ko lo lv mai mk ml mr ms my nb nds nl nn or pa pl pt_BR pt ro ru si sk sl sr@latin sr sv ta te th tr uk vi zh_CN zh_TW "; \ for lang in $linguas; do \ dir=/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/$lang/LC_MESSAGES; \ /bin/bash /build/buildd/system-config-printer-1.3.11+20120807/install-sh -d $dir; \ if test -r $lang.gmo; then \ /usr/bin/install -c -m 644 $lang.gmo $dir/system-config-printer.mo; \ echo "installing $lang.gmo as $dir/system-config-printer.mo"; \ else \ /usr/bin/install -c -m 644 ./$lang.gmo $dir/system-config-printer.mo; \ echo "installing ./$lang.gmo as" \ "$dir/system-config-printer.mo"; \ fi; \ if test -r $lang.gmo.m; then \ /usr/bin/install -c -m 644 $lang.gmo.m $dir/system-config-printer.mo.m; \ echo "installing $lang.gmo.m as $dir/system-config-printer.mo.m"; \ else \ if test -r ./$lang.gmo.m ; then \ /usr/bin/install -c -m 644 ./$lang.gmo.m \ $dir/system-config-printer.mo.m; \ echo "installing ./$lang.gmo.m as" \ "$dir/system-config-printer.mo.m"; \ else \ true; \ fi; \ fi; \ done installing ar.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo installing as.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/as/LC_MESSAGES/system-config-printer.mo installing bg.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo installing bn_IN.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo installing bn.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo installing br.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/br/LC_MESSAGES/system-config-printer.mo installing bs.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo installing ca.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo installing cs.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo installing cy.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo installing da.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/da/LC_MESSAGES/system-config-printer.mo installing de.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/de/LC_MESSAGES/system-config-printer.mo installing el.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/el/LC_MESSAGES/system-config-printer.mo installing en_GB.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo installing es.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/es/LC_MESSAGES/system-config-printer.mo installing et.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/et/LC_MESSAGES/system-config-printer.mo installing fa.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo installing fi.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo installing fr.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo installing gu.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo installing he.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/he/LC_MESSAGES/system-config-printer.mo installing hi.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo installing hr.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo installing hu.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo installing hy.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/hy/LC_MESSAGES/system-config-printer.mo installing id.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/id/LC_MESSAGES/system-config-printer.mo installing is.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/is/LC_MESSAGES/system-config-printer.mo installing it.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/it/LC_MESSAGES/system-config-printer.mo installing ja.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo installing ka.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo installing kn.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo installing ko.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo installing lo.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/lo/LC_MESSAGES/system-config-printer.mo installing lv.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo installing mai.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo installing mk.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/mk/LC_MESSAGES/system-config-printer.mo installing ml.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo installing mr.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo installing ms.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo installing my.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/my/LC_MESSAGES/system-config-printer.mo installing nb.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo installing nds.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo installing nl.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo installing nn.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo installing or.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/or/LC_MESSAGES/system-config-printer.mo installing pa.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo installing pl.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo installing pt_BR.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo installing pt.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo installing ro.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo installing ru.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo installing si.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/si/LC_MESSAGES/system-config-printer.mo installing sk.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo installing sl.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo installing sr@latin.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo installing sr.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo installing sv.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo installing ta.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo installing te.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/te/LC_MESSAGES/system-config-printer.mo installing th.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/th/LC_MESSAGES/system-config-printer.mo installing tr.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo installing uk.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo installing vi.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo installing zh_CN.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo installing zh_TW.gmo as /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo make[2]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807/po' make[2]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807' /usr/bin/python setup.py build running build running build_py make[3]: Entering directory `/build/buildd/system-config-printer-1.3.11+20120807' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/bin' /usr/bin/install -c system-config-printer system-config-printer-applet dbus/scp-dbus-service '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/bin' /usr/bin/python setup.py install --install-layout=deb --root=/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/ running install running build running build_py running install_lib creating /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib creating /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7 creating /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages creating /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers copying build/lib.linux-armv7l-2.7/cupshelpers/cupshelpers.py -> /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers copying build/lib.linux-armv7l-2.7/cupshelpers/config.py -> /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers copying build/lib.linux-armv7l-2.7/cupshelpers/__init__.py -> /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers copying build/lib.linux-armv7l-2.7/cupshelpers/installdriver.py -> /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers copying build/lib.linux-armv7l-2.7/cupshelpers/ppds.py -> /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers copying build/lib.linux-armv7l-2.7/cupshelpers/xmldriverprefs.py -> /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers copying build/lib.linux-armv7l-2.7/cupshelpers/openprinting.py -> /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers byte-compiling /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers/cupshelpers.py to cupshelpers.pyc byte-compiling /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers/config.py to config.pyc byte-compiling /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers/__init__.py to __init__.pyc byte-compiling /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers/installdriver.py to installdriver.pyc byte-compiling /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers/ppds.py to ppds.pyc byte-compiling /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers/xmldriverprefs.py to xmldriverprefs.pyc byte-compiling /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers/openprinting.py to openprinting.pyc running install_egg_info Writing /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp/usr/lib/python2.7/dist-packages/cupshelpers-1.0.egg-info /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//etc/cupshelpers' /usr/bin/install -c -m 644 xml/preferreddrivers.xml '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//etc/cupshelpers' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//etc/dbus-1/system.d/' /usr/bin/install -c -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//etc/dbus-1/system.d/' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/dbus-1/interfaces/' /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.xml '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/dbus-1/interfaces/' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/dbus-1/services/' /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.service '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/dbus-1/services/' mkdir -p /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/applications/ mkdir -p /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/applications/ desktop-file-install \ --dir /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/applications/ \ --add-category System \ --add-category Settings \ --add-category HardwareSettings \ --add-category Printing \ --add-category GTK \ system-config-printer.desktop desktop-file-install \ --dir /build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//etc/xdg/autostart/ \ --add-category System \ --add-category Monitor \ --add-category GTK \ print-applet.desktop /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/man/man1' /usr/bin/install -c -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/man/man1' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/icons' /usr/bin/install -c -m 644 icons/i-network-printer.png '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/icons' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/ui' /usr/bin/install -c -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/ui' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/xml' /usr/bin/install -c -m 644 xml/preferreddrivers.rng xml/validate.py '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/xml' /usr/bin/install -c -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewall.py gui.py gtkinklevel.py gtkspinner.py installpackage.py jobviewer.py monitor.py newprinter.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py gtk_label_autowrap.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/.' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/troubleshoot' /usr/bin/install -c -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/troubleshoot' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/troubleshoot/' /usr/bin/install -c troubleshoot/__init__.py '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer/troubleshoot/' /usr/bin/install -c check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py applet.py '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//usr/share/system-config-printer' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//lib/udev' /usr/bin/install -c udev/udev-configure-printer '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//lib/udev' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//lib/udev' /usr/bin/install -c udev/udev-add-printer '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//lib/udev' /bin/mkdir -p '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//lib/udev/rules.d' /usr/bin/install -c -m 644 udev/70-printers.rules '/build/buildd/system-config-printer-1.3.11+20120807/debian/tmp//lib/udev/rules.d' make[3]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807' make[2]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807' make[1]: Leaving directory `/build/buildd/system-config-printer-1.3.11+20120807' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/system-config-printer-udev.substvars dh_installdirs -psystem-config-printer-udev dh_installdocs -psystem-config-printer-udev ./README ./AUTHORS dh_installexamples -psystem-config-printer-udev dh_installman -psystem-config-printer-udev dh_installinfo -psystem-config-printer-udev dh_installmenu -psystem-config-printer-udev dh_installcron -psystem-config-printer-udev dh_installinit -psystem-config-printer-udev dh_installdebconf -psystem-config-printer-udev dh_installemacsen -psystem-config-printer-udev dh_installcatalogs -psystem-config-printer-udev dh_installpam -psystem-config-printer-udev dh_installlogrotate -psystem-config-printer-udev dh_installlogcheck -psystem-config-printer-udev dh_installchangelogs -psystem-config-printer-udev dh_installudev -psystem-config-printer-udev dh_lintian -psystem-config-printer-udev dh_bugfiles -psystem-config-printer-udev dh_install -psystem-config-printer-udev dh_link -psystem-config-printer-udev dh_installmime -psystem-config-printer-udev dh_installgsettings -psystem-config-printer-udev dh_gconf -psystem-config-printer-udev dh_icons -psystem-config-printer-udev dh_translations -psystem-config-printer-udev Wrote ../ui/AboutDialog.ui.h Wrote ../ui/ConnectDialog.ui.h Wrote ../ui/ConnectingDialog.ui.h Wrote ../ui/InstallDialog.ui.h Wrote ../ui/JobsWindow.ui.h Wrote ../ui/NewPrinterName.ui.h Wrote ../ui/NewPrinterWindow.ui.h Wrote ../ui/PrinterPropertiesDialog.ui.h Wrote ../ui/PrintersWindow.ui.h Wrote ../ui/ServerSettingsDialog.ui.h Wrote ../ui/SMBBrowseDialog.ui.h Wrote ../ui/statusicon_popupmenu.ui.h Wrote ../ui/WaitWindow.ui.h Wrote ../system-config-printer.desktop.in.h Wrote ../print-applet.desktop.in.h Building system-config-printer.pot... Running xgettext --add-comments --directory=. --default-domain=system-config-printer --flag=g_strdup_printf:1:c-format --flag=g_string_printf:2:c-format --flag=g_string_append_printf:2:c-format --flag=g_error_new:3:c-format --flag=g_set_error:4:c-format --flag=g_markup_printf_escaped:1:c-format --flag=g_log:3:c-format --flag=g_print:1:c-format --flag=g_printerr:1:c-format --flag=g_printf:1:c-format --flag=g_fprintf:2:c-format --flag=g_sprintf:2:c-format --flag=g_snprintf:3:c-format --flag=g_scanner_error:2:c-format --flag=g_scanner_warn:2:c-format --output=system-config-printer.pot --files-from=./POTFILES.in.temp --keyword=_ --keyword=N_ --msgid-bugs-address="https://bugzilla.redhat.com/bugzilla" --from-code=UTF-8 Removing generated header (.h) files...done. Wrote system-config-printer.pot dh_langpack: processing files to add translation domain 'system-config-printer'.. dh_strip -psystem-config-printer-udev dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: system-config-printer-udev dh_strip debug symbol extraction: packages to act on: system-config-printer-udev dh_strip debug symbol extraction: ignored packages: dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dpkg-deb: warning: '/build/buildd/system-config-printer-1.3.11+20120807/debian/system-config-printer-udev-dbgsym/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `system-config-printer-udev-dbgsym' in `../system-config-printer-udev-dbgsym_1.3.11+20120807-0ubuntu2_armel.ddeb'. dh_compress -psystem-config-printer-udev dh_fixperms -psystem-config-printer-udev dh_makeshlibs -psystem-config-printer-udev dh_installdeb -psystem-config-printer-udev dh_perl -psystem-config-printer-udev dh_shlibdeps -psystem-config-printer-udev dh_gencontrol -psystem-config-printer-udev dpkg-gencontrol: warning: Depends field of package system-config-printer-udev: unknown substitution variable ${python:Depends} dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -psystem-config-printer-udev ; fi dh_md5sums -psystem-config-printer-udev dh_builddeb -psystem-config-printer-udev INFO: pkgstriptranslations version 116 pkgstriptranslations: processing system-config-printer-udev (in debian/system-config-printer-udev); do_strip: 1, oemstrip: pkgstriptranslations: system-config-printer-udev does not contain translations, skipping pkgstriptranslations: preparing translation tarball system-config-printer_1.3.11+20120807-0ubuntu2_armel_translations.tar.gz...dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe done pkgmaintainermangler: Not overriding Maintainer for domain lists.ubuntu.com pkgstripfiles: processing control file: debian/system-config-printer-udev/DEBIAN/control, package system-config-printer-udev, directory debian/system-config-printer-udev pkgstripfiles: Truncating usr/share/doc/system-config-printer-udev/changelog.Debian.gz to topmost ten records pkgstripfiles: PNG optimization for package system-config-printer-udev took 0 s dpkg-deb: warning: 'debian/system-config-printer-udev/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `system-config-printer-udev' in `../system-config-printer-udev_1.3.11+20120807-0ubuntu2_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../system-config-printer_1.3.11+20120807-0ubuntu2_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-source --after-build system-config-printer-1.3.11+20120807 dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20120823-1727 Publishing chroot-autobuild/build/buildd/system-config-printer_1.3.11+20120807-0ubuntu2_armel_translations.tar.gz for rosetta. Publishing debug debs. chroot-autobuild/build/buildd/system-config-printer-udev_1.3.11+20120807-0ubuntu2_armel.deb: new debian package, version 2.0. size 21998 bytes: control archive= 895 bytes. 814 bytes, 17 lines control 540 bytes, 7 lines md5sums Package: system-config-printer-udev Source: system-config-printer Version: 1.3.11+20120807-0ubuntu2 Architecture: armel Maintainer: Ubuntu Core Developers Installed-Size: 111 Depends: libc6 (>= 2.4), libcups2 (>= 1.6.0-1), libglib2.0-0 (>= 2.12.0), libudev0 (>= 161), libusb-1.0-0 (>= 2:1.0.8), python-cups (>= 1.9.55), python-dbus, python-cupshelpers Section: gnome Priority: optional Description: Printer auto-configuration facility based on udev A CUPS printer configuration tool and status applet. . This package provides udev rules and callouts for auto-setup of print queues (Plug'n'Print) and for automatic disabling and re-enabling print queues when the printer gets disconnected and reconnected. Original-Maintainer: Otavio Salvador chroot-autobuild/build/buildd/system-config-printer-udev_1.3.11+20120807-0ubuntu2_armel.deb: drwxr-xr-x root/root 0 2012-08-23 17:27 ./ drwxr-xr-x root/root 0 2012-08-23 17:27 ./lib/ drwxr-xr-x root/root 0 2012-08-23 17:27 ./lib/udev/ -rwxr-xr-x root/root 9061 2012-08-23 17:26 ./lib/udev/udev-add-printer drwxr-xr-x root/root 0 2012-08-23 17:26 ./lib/udev/rules.d/ -rw-r--r-- root/root 348 2012-08-23 17:26 ./lib/udev/rules.d/70-printers.rules -rwxr-xr-x root/root 26460 2012-08-23 17:27 ./lib/udev/udev-configure-printer drwxr-xr-x root/root 0 2012-08-23 17:26 ./usr/ drwxr-xr-x root/root 0 2012-08-23 17:26 ./usr/share/ drwxr-xr-x root/root 0 2012-08-23 17:26 ./usr/share/doc/ drwxr-xr-x root/root 0 2012-08-23 17:27 ./usr/share/doc/system-config-printer-udev/ -rw-r--r-- root/root 2871 2012-08-23 17:27 ./usr/share/doc/system-config-printer-udev/changelog.Debian.gz -rw-r--r-- root/root 64 2012-08-07 17:05 ./usr/share/doc/system-config-printer-udev/AUTHORS -rw-r--r-- root/root 142 2012-08-07 17:05 ./usr/share/doc/system-config-printer-udev/README -rw-r--r-- root/root 1328 2012-08-23 17:25 ./usr/share/doc/system-config-printer-udev/copyright system-config-printer_1.3.11+20120807-0ubuntu2_armel.changes: Format: 1.8 Date: Thu, 23 Aug 2012 19:00:00 +0200 Source: system-config-printer Binary: system-config-printer-common system-config-printer-udev system-config-printer-gnome python-cupshelpers Architecture: armel armel_translations Version: 1.3.11+20120807-0ubuntu2 Distribution: quantal Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: Till Kamppeter Description: python-cupshelpers - Python modules for printer configuration with CUPS system-config-printer-common - Printer configuration GUI system-config-printer-gnome - Printer configuration GUI system-config-printer-udev - Printer auto-configuration facility based on udev Changes: system-config-printer (1.3.11+20120807-0ubuntu2) quantal; urgency=low . * debian/patches/30_driver-autodownload.patch: Added support for automatic driver package download from OpenPrinting without needing Jockey. * debian/local/install-printerdriver: Helper script for printer driver download via PackageKit. * debian/control: Added dependency on python-pycurl. * debian/system-config-printer-gnome.install: Install install-printerdriver. Checksums-Sha1: a504c4dd60c8961be32df3aba053c1ceb806b88c 21998 system-config-printer-udev_1.3.11+20120807-0ubuntu2_armel.deb 673ec453f1c587978ae476a4f258c1d0d38317ab 1449285 system-config-printer_1.3.11+20120807-0ubuntu2_armel_translations.tar.gz Checksums-Sha256: 40a6305d2797f01d8fc28c74f33cb897fc34271c4b5cb0803b4399fa0cc28400 21998 system-config-printer-udev_1.3.11+20120807-0ubuntu2_armel.deb b67f8566a2cd752432620746c7020fd013c762f675291dea332669dccb113427 1449285 system-config-printer_1.3.11+20120807-0ubuntu2_armel_translations.tar.gz Files: 12aa56de84ef2bcac5a681e29bf6e8ce 21998 gnome optional system-config-printer-udev_1.3.11+20120807-0ubuntu2_armel.deb 1c22104efa43c46629a1746944b51090 1449285 raw-translations - system-config-printer_1.3.11+20120807-0ubuntu2_armel_translations.tar.gz Original-Maintainer: Otavio Salvador ****************************************************************************** Built successfully ****************************************************************************** Finished at 20120823-1727 Build needed 00:02:11, 22456k disk space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', 'a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849'] Scanning for processes to kill in build /home/buildd/build-a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', 'a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849'] Unmounting chroot for build a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', 'a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849'] Removing build a6b5fbbf95bcdbb798296c5f7ca9f5db41e95849