u-boot 2018.03+dfsg1-2ubuntu1 source package in Ubuntu

Changelog

u-boot (2018.03+dfsg1-2ubuntu1) cosmic; urgency=low

  * Merge from Debian unstable.  Remaining changes:
    - rpi-import-mkknlimg.patch import tools/mkknlimg from Xenial/raspi2 -
      scripts/mkknlimg @ 83a3ebb
  * debian/patches/rpi2-rpi3-config-tweaks.patch: basing on the earlier
    rpi2-config-tweaks.patch, make configuration adjustments to the rpi2 and
    rpi3 configs.

u-boot (2018.03+dfsg1-2) unstable; urgency=medium

  [ Riku Voipio ]
  * u-boot-qcom: Add dragonboard 820c build (Closes: #894212).

  [ Vagrant Cascadian ]
  * u-boot-install-sunxi64: Ignore device write checks when FORCE is set.
  * u-boot-exynos: Update odroid patch to support distro_bootcmd, dropping
    support for legacy boot.
  * Add back uboot.elf, used to install jetson-tx1 (Closes: #893908).

u-boot (2018.03+dfsg1-1) unstable; urgency=medium

  * New upstream release.
  * Update patches for new upstream release.
  * debian/rules: Update default configuration for tools target.
  * [arm64] u-boot-rockchip: Add puma-rk3399 target.
  * Switch Vcs-* to use salsa.debian.org.
  * debian/rules: Fix typo that disabled 4GB ram support for the
    mx6cuboxi4x4 target (Closes: #893062).
  * Add patch to fix mmc support on Odroid-C2. Thanks to Jaehoon Chung and
    Heinrich Schuchardt.
  * u-boot-sunxi:
    - Add u-boot-install-sunxi64 script (Closes: #891490). Thanks to Adam
      Borowski.
    - [arm64] Add recommends on atf-allwinner.
  * debian/copyright: Updated location for libfdt.
  * Drop installation of uboot.elf, as it is stripped of debugging symbols
    and therefor not particularly useful.

u-boot (2018.01+dfsg1-2) unstable; urgency=medium

  * Update to use https copyright format URL.
  * debian/rules: Remove "dh --parallel", default in debhelper compat 11.
  * debian/patches:
    - Remove patch for IGEP board that was never applied.
    - Fix typo in mx6cubox-i4x4 patch description.
    - Add description to no-force-cross-compile-powerpc patch.
    - Add a description for the omap5_distro_bootcmd patch.
    - Remove patch for hurd support, as no packages are built on that
      hurd.

u-boot (2018.01+dfsg1-1) experimental; urgency=medium

  * New upstream release.
  * debian/patches: Refresh and removed.
  * debian/control:
    - Update to Standards-Version 4.1.3, no changes.
    - Build-Depend on debhelper 11.
  * debian/compat: Switch to debhelper compatibility level 11.

u-boot (2017.11+dfsg1-3) unstable; urgency=medium

  [ Vagrant Cascadian ]
  * Add patch submitted upstream to fix ethernet on Olimex
    A20-Olinuxino-Micro Rev. J (Closes: #864562).

  [ Marek Vasut ]
  * Disable DDR calibration on DH iMX6 (Closes: #884442).

u-boot (2017.11+dfsg1-2) unstable; urgency=medium

  [ Vagrant Cascadian ]
  * u-boot-tools: Fix broken FIT image generation by building tools-only
    target with an empty defconfig.
  * Run basic tests for mkimage/dumpimage.

  [ Marek Vasut ]
  * Backport DH iMX6 DDR configuration fix (Closes: #882123).

  [ Vagrant Cascadian ]
  * debian/control: Bump Standards-Version 4.1.2, no changes.
  * debian/rules: Use dpkg/architecture.mk instead of manually calling
    dpkg-architecture.

u-boot (2017.11+dfsg1-1) experimental; urgency=medium

  [ Vagrant Cascadian ]
  * Remove patches applied upstream.
  * Refresh patches.
  * Drop beaglebone black patch for usb-mass-storage.

  [ Marek Vasut ]
  * Add DHCOM i.MX6 PDK board support (Closes: #881298).

  [ Vagrant Cascadian ]
  * u-boot-sunxi: Include documentation for pine64 using u-boot SPL
    (Closes: #842688).
  * u-boot-rockchip: Include rk3399-firefly.dtb instead of generic
    u-boot.dtb file.

u-boot (2017.09+dfsg1-3) unstable; urgency=medium

  * Set the fdtfile variable from the value of CONFIG_DEFAULT_DEVICE_TREE
    (Closes: #870897). Thanks to Diego Roversi for the bug report!
  * Add patch to fix building jffs2 with gcc-7 (Closes: #877963). Thanks
    to Adrian Bunk!
  * Update Standards-Version of Debian Policy 4.1.1, no changes needed.

u-boot (2017.09+dfsg1-2) unstable; urgency=medium

  * u-boot-imx: mx6cuboxi4x4: Use a symlink for u-boot.img to mx6cuboxi,
    as it is identical.
  * u-boot-imx/u-boot-omap: Do not install spl/u-boot-spl.bin when the
    target uses SPL or MLO.
  * debian/rules: Generate mx6cuboxi4x4_defconfig based on
    mx6cuboxi_defconfig.
  * debian/rules: Do not install uboot.elf in mx6cuboxi4x4 target.
  * debian/rules: Only build the SPL target on mx6cuboxi4x4.
  * debian/patches: Fix odroid patch to actually use distro_bootcmd.
  * u-boot-rockchip: Fix USB on firefly-rk3399 with patches from upstream.
  * u-boot-exynos: Add patch to fix "console" environment variable
    (Closes: #877074). Thanks to Peter Lebbing!

u-boot (2017.09+dfsg1-1) experimental; urgency=medium

  * New upstream release.
  * Refreshed patches for new upstream version.
  * Update check for generating u-boot.rksd.
  * [armhf] u-boot-omap: Update to use igep00x0 target, which replaced
    igep0020.
  * debian/rules:
    - Use pkg-info.mk from dpkg-dev to set SOURCE_DATE_EPOCH and get the
      package version.
    - Switch "env" target to "envtools".

u-boot (2017.07+dfsg1-3) unstable; urgency=medium

  * u-boot-rockchip:
    - Generate u-boot.rksd used for firefly-rk3288 installation.
    - Add README.Debian describing how to install firefly-rk3288.

u-boot (2017.07+dfsg1-2) unstable; urgency=medium

  * u-boot-rockchip:
    - Ship u-boot.bin in firefly-rk3288 instead of u-boot.img.
    - Add NEWS file explaining the change for firefly-rk3288.
  * u-boot-imx:
    - mx6cuboxi: Add patch from upstream to support SATA.
    - Add patch to enable booting from SATA on wandboard.
  * u-boot-tools:
    - Install upstream fw_env.config, which includes several
      well-commented examples.
  * Consistantly use dd with conv=fsync,notrunc in Debian README files
    (Closes: #864742). Thanks to Heinrich Schuchardt.
  * debian/control:
    - Update to Standards-Version 4.0.0.

u-boot (2017.07+dfsg1-1) unstable; urgency=medium

  * New upstream release.
  * debian/patches:
    - Refresh am57xx/omap5_distro_bootcmd.
    - Refresh distro_bootcmd patches for am57xx and odroid.
    - Sync mx6cuboxi4x4 patch with mx6cuboxi.
  * u-boot-sunxi: Install README.sunxi64.
  * [arm64] u-boot-sunxi: Install additional pine64 targets needed to
    manually build an SPL image.
  * [arm64] u-boot-rockchip: Add firefly-rk3399 target.
  * [armhf] Add Build-Depends on libpython-dev:native and swig.
  * [arm64] Add build-depends on libpython-dev:native, python and swig.
  * debian/rules: Split generation of rksd images into script, supporting
    generation for both rk3288 and rk3399 systems.
  * debian/copyright: Remove entries from Files-Excluded no longer present
    upstream.

u-boot (2017.05+dfsg1-1) experimental; urgency=medium

  * New upstream release.
  * Remove patches, applied upstream:
    - odroid-c2/0001-meson-gxbb-enable-MMC-as-boot-target.patch
    - odroid-c2/0002-meson-gxbb-change-ramdisk_addr_r.patch
  * Refresh patches:
    - am57xx/omap5_distro_bootcmd
    - n900-bootz-raw-initrd.diff
  * Split Build-Depends into multiple lines.
  * Add dependencies for cross-building arm64, armhf and armel.

u-boot (2017.05~rc2+dfsg1-1) experimental; urgency=medium

  * New upstream release candidate.

  * Remove patches applied upstream:
    - mx6cuboxi/serial_console_speed
    - Makefile-Fix-linking-with-modern-binutils

  * Refresh patches:
    - am57xx/omap5_distro_bootcmd
    - arndale/board-spl-rule

  * [arm64] Add u-boot-amlogic
    - Enable the odroid-c2 target.
    - Add patches:
      + Enable MMC boot on odroid-c2.
      + Fix ramdisk load address on odroid-c2.

u-boot (2017.05~rc1+dfsg1-1) experimental; urgency=medium

  * New upstream release candidate.

  * Refresh patches:
    - beagleboneblack usb-mass-storage.
    - mx6cuboxi4x4.
    - Update am57xx distro_bootcmd patch and also fix for dra7xx_evm.

  * Remove patches applied upstream:
    - orangepi_zero
    - openrd

  * Add patches from upstream:
    - Fix building with binutils.

  * Update lintian overrides with openrd targets.

u-boot (2016.11+dfsg1-4) unstable; urgency=medium

  [ Vagrant Cascadian ]
  * [armel] Apply a patch from upstream to fix openrd targets which failed
    to boot, and re-enable the openrd targets (Closes: #856441). Thanks to
    Albert ARIBAUD for the patch, Martin Michlmayr for pointing out the
    patch, and Phil Hands and Rick Thomas for testing on various openrd
    platforms.

  [ Martin Michlmayr ]
  * u-boot-rpi: typo in README.Debian (Closes: #858574).

u-boot (2016.11+dfsg1-3) unstable; urgency=medium

  [ Peter Michael Green ]
  * u-boot-imx: Add patch to add an mx6cuboxi4x4 target, supporting boards
    with 4GB of ram (Closes: #848911).

  [ Vagrant Cascadian ]
  * u-boot-sunxi: Add patches to support orangepi_zero.
    (Closes: #848557). Thanks to Mateusz Łukasik.
  * Add Rick Thomas to mx6cuboxi testers.

u-boot (2016.11+dfsg1-2) unstable; urgency=medium

  * u-boot-sunxi: Add nanopi_neo target.
    Thanks to Paul Tagliamonte. (Closes: #845932).

u-boot (2016.11+dfsg1-1) unstable; urgency=medium

  * New upstream release.
  * Remove mksunxiboot-spl patch, applied upstream.
  * Refresh patches.
  * Enable Cubieboard4 target.
  * Remove patches for ram detection on rk3288, applied upstream.

u-boot (2016.11~rc2+dfsg1-1) experimental; urgency=medium

  * New upstream release candidate.
  * Refresh patch for am57xx to use distro_bootcmd support.
  * Remove patches from 2016.09.01, applied upstream.
  * Add patches to enable ram detection on rockchip rk3288 platforms.
  * Update lintian overrides for openrd removal.

u-boot (2016.09+dfsg1-2) unstable; urgency=medium

  * odroid-xu3: Add patch to use the default bootdelay from
    distro_bootcmd.
  * Remove Philip Rinn from Cubieboard2 testers.
  * u-boot-rpi: Add documentation for configuring raspberry pi to use
    u-boot.
  * debian/watch: Add signature checking of upstream tarball.
  * u-boot-tools: Add device-tree-compiler to Recommends. Thanks to
    Pierre-Hugues Husson.  (Closes: #841351).
  * Apply patches from v2016.09.01:
    - 0001-Revert-Increase-default-of-CONFIG_SYS_MALLOC_F_LEN-f.patch
    - 0002-Revert-image-fit-switch-ENOLINK-to-ENOENT.patch
  * Remove openrd targets, as they do not boot (Closes: #837629).

u-boot (2016.09+dfsg1-1) unstable; urgency=medium

  * New upstream version.

  [ Vagrant Cascadian ]
  * Remove Ian Campbell from the list of arndale testers.
  * Remove Joey Hess from the A10-OLinuXino-Lime testers.
  * [armhf] u-boot-sunxi: Enable the CHIP target.
  * Refresh and remove patches applied upstream.

u-boot (2016.09~rc2+dfsg1-1) experimental; urgency=medium

  [ Vagrant Cascadian ]
  * New upstream release candidate.
  * Simplify cross-building in debian/rules.
  * Refresh debian/patches/tools-only-in-no-dot-config-targets.diff
  * u-boot-omap:
    - Add omap3_pandora target.
    - Add patches to switch omap3-pandora to use distro bootcmd.
  * Add patches from upstream to fix cache issues.

  [ Martin Michlmayr ]
  * Generate bootable image for DragonBoard 410c (Closes: #835656).

  [ Vagrant Cascadian ]
  * [arm64] Fix cross-building of DragonBoard 410c:
    - Allow skales:native to satisfy build-dependency.
    - Add build-depends on libfdt-dev:native.

u-boot (2016.09~rc1+dfsg1-1) experimental; urgency=medium

  * New upstream release candidate.
  * Remove patches applied upstream.
  * Remove redundant u-boot-rockchip.docs, as it is handled in the
    u-boot-rockchip.install file.
  * u-boot-sunxi: Install README for pine64 target.
  * Add build-depends on python:any [armhf], which is now required to
    build the firefly-rk3288 target.
  * Fix build of firefly-rk3288 target, which now uses u-boot-spl.bin to
    generate rksd image.
  * Build u-boot.img and u-boot.bin instead of deprecated u-boot-dtb.*
    targets.

u-boot (2016.07~rc3+dfsg1-2) experimental; urgency=medium

  * [armel] Apply patch from upstream that fixes FTBFS on openrd variants.
    (Closes: #830169).

u-boot (2016.07~rc3+dfsg1-1) experimental; urgency=medium

  * New upstream release candidate.

  [ Vagrant Cascadian ]
  * u-boot-sunxi: Enable on arm64.
  * u-boot-sunxi: Enable pine64_plus target on arm64.
  * Remove reproducibility patches, applied upstream.

  [ Ricardo Salveti ]
  * [arm64] Add u-boot-qcom package and enable dragonboard410c target
    (Closes: #824955).
  * Add patch submitted upstream "dragonboard410c: adding missing default
    addr for script and pxe boot."
  * Add patch submitted upstream "dragonboard410c: prefer sdcard boot over
    emmc"

u-boot (2016.07~rc1+dfsg1-3) experimental; urgency=medium

  [ Martin Michlmayr ]
  * Add NVIDIA to Tegra description
  * u-boot-tegra.README.Debian: fix name of package
  * u-boot-tegra.README.Debian: improve Jetson TK instructions.
    (Closes: #827081).

  [ Vagrant Cascadian ]
  * debian/control: u-boot-tools is not needed when cross-building on
    arm64.
  * Add patch to respect SOURCE_DATE_EPOCH when building FIT images,
    fixing reproducibility issues with dra7xx_evm target. Thanks to HW42
    for the patch.

u-boot (2016.07~rc1+dfsg1-2) experimental; urgency=medium

  * u-boot-tegra: Only install p2371-2180 symlink on arm64.
    (Closes: #826905). Thanks to Martin Michlmayr for the report!
  * Add patch to fix reproducibility issues with ld and some
    locales. Thanks to HW42!

u-boot (2016.07~rc1+dfsg1-1) experimental; urgency=medium

  * New upstream release candidate.

  [ Martin Michlmayr ]
  * u-boot-tegra:
    - Add Jetson TX1 (P2371-2180) target (Closes: #825458).
    - Add arm64 arch.
    - Update README.Debian for Jetson TX1.

  [ Vagrant Cascadian ]
  * u-boot-omap: Update use dra7xx_evm target.
  * u-boot-imx: Remove patch to us private libgcc on imx systems.
  * u-boot-exynos:
    - Refresh odroid distro_bootcmd patch.
    - Increase default environment size on odroid-u3 to support
      distro_bootcmd.
  * u-boot-sunxi: Enable Cubietruck_plus target.

u-boot (2016.05+dfsg1-1) experimental; urgency=medium

  * New upstream version.

  [ Ryan Finnie ]
  * u-boot-rpi: Add rpi_3, rpi_3_32b target (Closes: #823524).
  * u-boot-rpi: Add arm64 arch.

  [ Vagrant Cascadian ]
  * Remove patches applied upstream:
   - Revert-ti_armv7_common.h-Fix-U-Boot-location-on-eMMC.patch
   - Revert-rockchip-rk3288-correct-sdram-setting.patch
   - odroid-Update-README-with-correct-firmware-link-and-.patch

u-boot (2016.05~rc3+dfsg1-1) experimental; urgency=medium

  * New upstream release candidate.
  * Update debian/patches for 2016.05-rc3.
  * u-boot-rockchip:
    - Revert upstream patch to fix detected ram size on Firefly boards.
  * u-boot-imx:
    - Add patch to fix FTBFS by using u-boot's private libgcc.
  * u-boot-tools:
    - Add fw_env.config for openrd (Closes: #821056).
      Thanks to Rick Thomas.
  * u-boot-omap:
    - Revert upstream patch changing the default offsets for loading
      u-boot from eMMC.
  * u-boot-exynos:
    - Add odroid-xu3 target, tested on Odroid-XU4.
    - Add patch from upstream with updated documentation about Odroid-XU4
      target.

 -- Łukasz 'sil2100' Zemczak <email address hidden>  Fri, 27 Apr 2018 12:38:24 +0100

Upload details

Uploaded by:
Łukasz Zemczak on 2018-06-07
Uploaded to:
Cosmic
Original maintainer:
Ubuntu Developers
Architectures:
linux-any
Section:
admin
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Cosmic release on 2018-06-08 main admin

Downloads

File Size SHA-256 Checksum
u-boot_2018.03+dfsg1.orig.tar.xz 9.8 MiB 36a0c652c6563aaeb8daf676a6a14607dcfbb74f06acd6cb2fc0a58f05013512
u-boot_2018.03+dfsg1-2ubuntu1.debian.tar.xz 42.5 KiB 462ed4e7ff66d0082ffb5d1ca5719384d06fde6cc83bbb6970638720f6e1b08c
u-boot_2018.03+dfsg1-2ubuntu1.dsc 2.5 KiB 672bceb66c2ee5aefefa198763e692cf1032c074b0f53919a3732bdce7d8c227

View changes file

Binary packages built by this source

u-boot: A boot loader for embedded systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.

u-boot-amlogic: A boot loader for amlogic systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various amlogic platforms.
 .
 Included platforms:
 odroid-c2

u-boot-exynos: A boot loader for exynos systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various Exynos platforms.
 .
 Included platforms:
 arndale
 odroid
 odroid-xu3

u-boot-imx: A boot loader for imx systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various imx platforms.
 .
 Included platforms:
 dh_imx6
 mx53loco
 mx6cuboxi
 mx6cuboxi4x4
 nitrogen6q
 novena
 udoo
 usbarmory
 wandboard

u-boot-omap: A boot loader for omap systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various omap and related
 platforms.
 .
 Included platforms:
 am335x_boneblack
 am57xx_evm
 dra7xx_evm
 igep00x0
 nokia_rx51
 omap3_beagle
 omap3_pandora
 omap4_panda

u-boot-qcom: A boot loader for qcom systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various qcom platforms.
 .
 Included platforms:
 dragonboard410c
 dragonboard820c

u-boot-rockchip: A boot loader for rockchip systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various Rockchip platforms.
 .
 Included platforms:
 firefly-rk3288

u-boot-rpi: A boot loader for Raspberry PI systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various Raspberry PI
 platforms.
 .
 Included platforms:
 rpi_2
 rpi_3_32b

u-boot-sunxi: A boot loader for sunxi systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various Allwinner/sunxi
 platforms.
 .
 Included platforms:
 A10-OLinuXino-Lime
 A10s-OLinuXino-M
 A20-OLinuXino-Lime
 A20-OLinuXino-Lime2
 A20-OLinuXino_MICRO
 A20-Olimex-SOM-EVB
 Bananapi
 Bananapro
 CHIP
 Cubieboard
 Cubieboard2
 Cubieboard4
 Cubietruck
 Cubietruck_plus
 Lamobo_R1
 Linksprite_pcDuino
 Linksprite_pcDuino3
 Mini-X
 nanopi_neo
 orangepi_plus
 orangepi_zero

u-boot-tegra: A boot loader for NVIDIA Tegra systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various NVIDIA Tegra platforms.
 .
 Included platforms:
 jetson-tk1

u-boot-tools: companion tools for Das U-Boot bootloader

 This package includes the mkimage program, which allows generation of U-Boot
 images in various formats, and the fw_printenv and fw_setenv programs to read
 and modify U-Boot's environment.