RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '3ac8ccb1409749eade7c5381f98a4de037a8154a', '/home/buildd/filecache-default/d25cfce2b3fece95dbe9195395127ff90e07576e'] Synching the system clock with the buildd NTP service... 12 May 10:23:01 ntpdate[15787]: adjust time server 10.211.37.1 offset 0.000570 sec Unpacking chroot for build 3ac8ccb1409749eade7c5381f98a4de037a8154a RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '3ac8ccb1409749eade7c5381f98a4de037a8154a'] Mounting chroot for build 3ac8ccb1409749eade7c5381f98a4de037a8154a RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '3ac8ccb1409749eade7c5381f98a4de037a8154a', 'deb http://ftpmaster.internal/ubuntu oneiric main'] Overriding sources.list in build-3ac8ccb1409749eade7c5381f98a4de037a8154a RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '3ac8ccb1409749eade7c5381f98a4de037a8154a', 'armel'] Updating debian chroot for build 3ac8ccb1409749eade7c5381f98a4de037a8154a Ign http://ftpmaster.internal oneiric InRelease Get:1 http://ftpmaster.internal oneiric Release.gpg [198 B] Get:2 http://ftpmaster.internal oneiric Release [39.8 kB] Get:3 http://ftpmaster.internal oneiric/main armel Packages [1549 kB] Ign http://ftpmaster.internal oneiric/main TranslationIndex Ign http://ftpmaster.internal oneiric/main Translation-en Fetched 1589 kB in 11s (143 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: binutils cpp-4.6 dpkg g++-4.6 gcc-4.5-base gcc-4.6 gcc-4.6-base insserv libc-bin libc-dev-bin libc6 libc6-dev libdb5.1 libgcc1 libgomp1 libidn11 libmpfr4 libncurses5 libncursesw5 libreadline6 libsepol1 libstdc++6 libstdc++6-4.6-dev linux-libc-dev multiarch-support ncurses-bin patch sed 28 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 28.6 MB of archives. After this operation, 69.6 kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! dpkg ncurses-bin sed libc-dev-bin libc6-dev libc-bin libc6 linux-libc-dev libgomp1 gcc-4.6-base libstdc++6 cpp-4.6 libstdc++6-4.6-dev g++-4.6 gcc-4.6 libgcc1 libmpfr4 binutils libncurses5 libreadline6 libdb5.1 libsepol1 multiarch-support insserv libncursesw5 libidn11 gcc-4.5-base patch Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ oneiric/main dpkg armel 1.16.0~ubuntu8 [1828 kB] Get:2 http://ftpmaster.internal/ubuntu/ oneiric/main ncurses-bin armel 5.9-1 [147 kB] Get:3 http://ftpmaster.internal/ubuntu/ oneiric/main sed armel 4.2.1-9 [134 kB] Get:4 http://ftpmaster.internal/ubuntu/ oneiric/main libc-dev-bin armel 2.13-2ubuntu1 [75.2 kB] Get:5 http://ftpmaster.internal/ubuntu/ oneiric/main libc6-dev armel 2.13-2ubuntu1 [2331 kB] Get:6 http://ftpmaster.internal/ubuntu/ oneiric/main libc-bin armel 2.13-2ubuntu1 [847 kB] Get:7 http://ftpmaster.internal/ubuntu/ oneiric/main libc6 armel 2.13-2ubuntu1 [3846 kB] Get:8 http://ftpmaster.internal/ubuntu/ oneiric/main linux-libc-dev armel 2.6.39-1.6 [778 kB] Get:9 http://ftpmaster.internal/ubuntu/ oneiric/main libgomp1 armel 4.6.0-6ubuntu3 [23.6 kB] Get:10 http://ftpmaster.internal/ubuntu/ oneiric/main gcc-4.6-base armel 4.6.0-6ubuntu3 [15.1 kB] Get:11 http://ftpmaster.internal/ubuntu/ oneiric/main libstdc++6 armel 4.6.0-6ubuntu3 [275 kB] Get:12 http://ftpmaster.internal/ubuntu/ oneiric/main cpp-4.6 armel 4.6.0-6ubuntu3 [4021 kB] Get:13 http://ftpmaster.internal/ubuntu/ oneiric/main libstdc++6-4.6-dev armel 4.6.0-6ubuntu3 [1642 kB] Get:14 http://ftpmaster.internal/ubuntu/ oneiric/main g++-4.6 armel 4.6.0-6ubuntu3 [4351 kB] Get:15 http://ftpmaster.internal/ubuntu/ oneiric/main gcc-4.6 armel 4.6.0-6ubuntu3 [4475 kB] Get:16 http://ftpmaster.internal/ubuntu/ oneiric/main libgcc1 armel 1:4.6.0-6ubuntu3 [22.2 kB] Get:17 http://ftpmaster.internal/ubuntu/ oneiric/main libmpfr4 armel 3.0.1-3 [169 kB] Get:18 http://ftpmaster.internal/ubuntu/ oneiric/main binutils armel 2.21.51.20110421-0ubuntu6 [2218 kB] Get:19 http://ftpmaster.internal/ubuntu/ oneiric/main libncurses5 armel 5.9-1 [162 kB] Get:20 http://ftpmaster.internal/ubuntu/ oneiric/main libreadline6 armel 6.2-1 [112 kB] Get:21 http://ftpmaster.internal/ubuntu/ oneiric/main libdb5.1 armel 5.1.25-10 [597 kB] Get:22 http://ftpmaster.internal/ubuntu/ oneiric/main libsepol1 armel 2.0.42-1 [103 kB] Get:23 http://ftpmaster.internal/ubuntu/ oneiric/main multiarch-support armel 2.13-2ubuntu1 [6724 B] Get:24 http://ftpmaster.internal/ubuntu/ oneiric/main insserv armel 1.14.0-2.1 [47.3 kB] Get:25 http://ftpmaster.internal/ubuntu/ oneiric/main libncursesw5 armel 5.9-1 [183 kB] Get:26 http://ftpmaster.internal/ubuntu/ oneiric/main libidn11 armel 1.20-1 [107 kB] Get:27 http://ftpmaster.internal/ubuntu/ oneiric/main gcc-4.5-base armel 4.5.3-1ubuntu1 [12.2 kB] Get:28 http://ftpmaster.internal/ubuntu/ oneiric/main patch armel 2.6.1-1 [78.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 28.6 MB in 7s (3751 kB/s) (Reading database ... 14084 files and directories currently installed.) Preparing to replace dpkg 1.16.0~ubuntu7 (using .../dpkg_1.16.0~ubuntu8_armel.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.16.0~ubuntu8) ... (Reading database ... 14084 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20101128-1 (using .../ncurses-bin_5.9-1_armel.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.9-1) ... (Reading database ... 14084 files and directories currently installed.) Preparing to replace sed 4.2.1-8 (using .../archives/sed_4.2.1-9_armel.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-9) ... (Reading database ... 14084 files and directories currently installed.) Preparing to replace libc-dev-bin 2.13-0ubuntu15 (using .../libc-dev-bin_2.13-2ubuntu1_armel.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6-dev 2.13-0ubuntu15 (using .../libc6-dev_2.13-2ubuntu1_armel.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-bin 2.13-0ubuntu15 (using .../libc-bin_2.13-2ubuntu1_armel.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.13-2ubuntu1) ... (Reading database ... 14084 files and directories currently installed.) Preparing to replace libc6 2.13-0ubuntu15 (using .../libc6_2.13-2ubuntu1_armel.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.13-2ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14084 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.38-8.42 (using .../linux-libc-dev_2.6.39-1.6_armel.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libgomp1 4.6.0-6ubuntu2 (using .../libgomp1_4.6.0-6ubuntu3_armel.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.6-base 4.6.0-6ubuntu2 (using .../gcc-4.6-base_4.6.0-6ubuntu3_armel.deb) ... Unpacking replacement gcc-4.6-base ... Setting up gcc-4.6-base (4.6.0-6ubuntu3) ... (Reading database ... 14098 files and directories currently installed.) Preparing to replace libstdc++6 4.6.0-6ubuntu2 (using .../libstdc++6_4.6.0-6ubuntu3_armel.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.6.0-6ubuntu3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14098 files and directories currently installed.) Preparing to replace cpp-4.6 4.6.0-6ubuntu2 (using .../cpp-4.6_4.6.0-6ubuntu3_armel.deb) ... Unpacking replacement cpp-4.6 ... Preparing to replace libstdc++6-4.6-dev 4.6.0-6ubuntu2 (using .../libstdc++6-4.6-dev_4.6.0-6ubuntu3_armel.deb) ... Unpacking replacement libstdc++6-4.6-dev ... Preparing to replace g++-4.6 4.6.0-6ubuntu2 (using .../g++-4.6_4.6.0-6ubuntu3_armel.deb) ... Unpacking replacement g++-4.6 ... Preparing to replace gcc-4.6 4.6.0-6ubuntu2 (using .../gcc-4.6_4.6.0-6ubuntu3_armel.deb) ... Unpacking replacement gcc-4.6 ... Preparing to replace libgcc1 1:4.6.0-6ubuntu2 (using .../libgcc1_1%3a4.6.0-6ubuntu3_armel.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.6.0-6ubuntu3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14098 files and directories currently installed.) Preparing to replace libmpfr4 3.0.1-2 (using .../libmpfr4_3.0.1-3_armel.deb) ... Unpacking replacement libmpfr4 ... Preparing to replace binutils 2.21.51.20110421-0ubuntu5 (using .../binutils_2.21.51.20110421-0ubuntu6_armel.deb) ... Unpacking replacement binutils ... Preparing to replace libncurses5 5.7+20101128-1 (using .../libncurses5_5.9-1_armel.deb) ... Unpacking replacement libncurses5 ... Setting up libncurses5 (5.9-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14098 files and directories currently installed.) Preparing to replace libreadline6 6.2-0ubuntu1 (using .../libreadline6_6.2-1_armel.deb) ... Unpacking replacement libreadline6 ... Setting up libreadline6 (6.2-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14098 files and directories currently installed.) Preparing to replace libdb5.1 5.1.19-2ubuntu1 (using .../libdb5.1_5.1.25-10_armel.deb) ... Unpacking replacement libdb5.1 ... Setting up libdb5.1 (5.1.25-10) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14099 files and directories currently installed.) Preparing to replace libsepol1 2.0.41-1 (using .../libsepol1_2.0.42-1_armel.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.0.42-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14098 files and directories currently installed.) Preparing to replace multiarch-support 2.13-0ubuntu15 (using .../multiarch-support_2.13-2ubuntu1_armel.deb) ... Unpacking replacement multiarch-support ... Setting up multiarch-support (2.13-2ubuntu1) ... (Reading database ... 14098 files and directories currently installed.) Preparing to replace insserv 1.14.0-2 (using .../insserv_1.14.0-2.1_armel.deb) ... Unpacking replacement insserv ... Preparing to replace libncursesw5 5.7+20101128-1 (using .../libncursesw5_5.9-1_armel.deb) ... Unpacking replacement libncursesw5 ... Preparing to replace libidn11 1.18-1build1 (using .../libidn11_1.20-1_armel.deb) ... Unpacking replacement libidn11 ... Preparing to replace gcc-4.5-base 4.5.2-11ubuntu2 (using .../gcc-4.5-base_4.5.3-1ubuntu1_armel.deb) ... Unpacking replacement gcc-4.5-base ... Preparing to replace patch 2.6-3 (using .../patch_2.6.1-1_armel.deb) ... Unpacking replacement patch ... Setting up libc-dev-bin (2.13-2ubuntu1) ... Setting up linux-libc-dev (2.6.39-1.6) ... Setting up libc6-dev (2.13-2ubuntu1) ... Setting up libgomp1 (4.6.0-6ubuntu3) ... Setting up libmpfr4 (3.0.1-3) ... Setting up cpp-4.6 (4.6.0-6ubuntu3) ... Setting up binutils (2.21.51.20110421-0ubuntu6) ... Setting up gcc-4.6 (4.6.0-6ubuntu3) ... Setting up insserv (1.14.0-2.1) ... Installing new version of config file /etc/insserv.conf ... Setting up libncursesw5 (5.9-1) ... Setting up libidn11 (1.20-1) ... Setting up gcc-4.5-base (4.5.3-1ubuntu1) ... Setting up patch (2.6.1-1) ... Setting up g++-4.6 (4.6.0-6ubuntu3) ... Setting up libstdc++6-4.6-dev (4.6.0-6ubuntu3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '3ac8ccb1409749eade7c5381f98a4de037a8154a', 'armel', 'oneiric', '--nolog', '--batch', '--archive=ubuntu', '--dist=oneiric', '--purpose=PRIMARY', '--architecture=armel', '--comp=main', 'xcb-util-keysyms_0.3.8-1.dsc'] Initiating build 3ac8ccb1409749eade7c5381f98a4de037a8154a with 0 processor cores. Automatic build of xcb-util-keysyms_0.3.8-1 on adoxaceae by sbuild/armel 1.170.5 Build started at 20110512-1027 ****************************************************************************** xcb-util-keysyms_0.3.8-1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: cdbs, debhelper (>= 5), libxcb1-dev (>= 1.6), pkg-config, libtool, x11proto-core-dev (>= 7.0.8), autotools-dev, autoconf, automake, xutils-dev Checking for already installed source dependencies... cdbs: missing debhelper: missing libxcb1-dev: missing pkg-config: missing libtool: missing x11proto-core-dev: missing autotools-dev: missing autoconf: missing automake: missing xutils-dev: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install cdbs debhelper libxcb1-dev pkg-config libtool x11proto-core-dev autotools-dev autoconf automake xutils-dev Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils dh-translations fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libexpat1 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libmagic1 libpipeline1 libpopt0 libpthread-stubs0 libpthread-stubs0-dev libsqlite3-0 libunistring0 liburi-perl libwww-perl libxau-dev libxau6 libxcb1 libxdmcp-dev libxdmcp6 libxml-parser-perl libxml2 m4 man-db mime-support po-debconf python python-scour python2.7 Suggested packages: autoconf2.13 autoconf-archive gnu-standards autoconf-doc wamerican wordlist whois vacation devscripts dh-make gettext-doc groff libdata-dump-perl libtool-doc automaken gfortran fortran95-compiler gcj libcrypt-ssleay-perl libio-socket-ssl-perl less www-browser libmail-box-perl python-doc python-tk python-profiler python-rsvg python-cairo python2.7-doc python2.7-profiler Recommended packages: curl wget lynx-cur libltdl-dev libmailtools-perl libhtml-format-perl xml-core libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils cdbs debhelper dh-translations fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libexpat1 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libmagic1 libpipeline1 libpopt0 libpthread-stubs0 libpthread-stubs0-dev libsqlite3-0 libtool libunistring0 liburi-perl libwww-perl libxau-dev libxau6 libxcb1 libxcb1-dev libxdmcp-dev libxdmcp6 libxml-parser-perl libxml2 m4 man-db mime-support pkg-config po-debconf python python-scour python2.7 x11proto-core-dev xutils-dev 0 upgraded, 48 newly installed, 0 to remove and 0 not upgraded. Need to get 12.0 MB of archives. After this operation, 43.8 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libexpat1 libsqlite3-0 libxau6 libxdmcp6 libxcb1 libmagic1 file libpopt0 mime-support python2.7 python bsdmainutils gettext-base groff-base liburi-perl libhtml-tagset-perl libhtml-parser-perl libhtml-tree-perl libpipeline1 libwww-perl libxml-parser-perl libxml2 man-db m4 autoconf autotools-dev automake html2text libcroco3 libunistring0 gettext intltool-debian po-debconf debhelper fdupes intltool dh-translations python-scour cdbs libpthread-stubs0 libpthread-stubs0-dev libtool x11proto-core-dev libxau-dev libxdmcp-dev libxcb1-dev pkg-config xutils-dev Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ oneiric/main libexpat1 armel 2.0.1-7ubuntu3 [103 kB] Get:2 http://ftpmaster.internal/ubuntu/ oneiric/main libsqlite3-0 armel 3.7.4-2ubuntu5 [270 kB] Get:3 http://ftpmaster.internal/ubuntu/ oneiric/main libxau6 armel 1:1.0.6-1ubuntu1 [7180 B] Get:4 http://ftpmaster.internal/ubuntu/ oneiric/main libxdmcp6 armel 1:1.1.0-1ubuntu1 [10.9 kB] Get:5 http://ftpmaster.internal/ubuntu/ oneiric/main libxcb1 armel 1.7-2ubuntu2 [33.5 kB] Get:6 http://ftpmaster.internal/ubuntu/ oneiric/main libmagic1 armel 5.04-5ubuntu2 [201 kB] Get:7 http://ftpmaster.internal/ubuntu/ oneiric/main file armel 5.04-5ubuntu2 [22.2 kB] Get:8 http://ftpmaster.internal/ubuntu/ oneiric/main libpopt0 armel 1.16-1 [32.8 kB] Get:9 http://ftpmaster.internal/ubuntu/ oneiric/main mime-support all 3.51-1ubuntu1 [30.7 kB] Get:10 http://ftpmaster.internal/ubuntu/ oneiric/main python2.7 armel 2.7.1-5ubuntu2 [2512 kB] Get:11 http://ftpmaster.internal/ubuntu/ oneiric/main python all 2.7.1-0ubuntu5 [163 kB] Get:12 http://ftpmaster.internal/ubuntu/ oneiric/main bsdmainutils armel 8.2.2 [193 kB] Get:13 http://ftpmaster.internal/ubuntu/ oneiric/main gettext-base armel 0.18.1.1-3ubuntu1 [56.1 kB] Get:14 http://ftpmaster.internal/ubuntu/ oneiric/main groff-base armel 1.21-5 [929 kB] Get:15 http://ftpmaster.internal/ubuntu/ oneiric/main liburi-perl all 1.58-1 [89.8 kB] Get:16 http://ftpmaster.internal/ubuntu/ oneiric/main libhtml-tagset-perl all 3.20-2 [13.5 kB] Get:17 http://ftpmaster.internal/ubuntu/ oneiric/main libhtml-parser-perl armel 3.68-1build1 [95.5 kB] Get:18 http://ftpmaster.internal/ubuntu/ oneiric/main libhtml-tree-perl all 4.2-1 [205 kB] Get:19 http://ftpmaster.internal/ubuntu/ oneiric/main libpipeline1 armel 1.2.0-1 [20.3 kB] Get:20 http://ftpmaster.internal/ubuntu/ oneiric/main libwww-perl all 5.837-1 [363 kB] Get:21 http://ftpmaster.internal/ubuntu/ oneiric/main libxml-parser-perl armel 2.36-1.1build4 [281 kB] Get:22 http://ftpmaster.internal/ubuntu/ oneiric/main libxml2 armel 2.7.8.dfsg-2 [561 kB] Get:23 http://ftpmaster.internal/ubuntu/ oneiric/main man-db armel 2.6.0.2-1 [677 kB] Get:24 http://ftpmaster.internal/ubuntu/ oneiric/main m4 armel 1.4.16-1 [182 kB] Get:25 http://ftpmaster.internal/ubuntu/ oneiric/main autoconf all 2.68-1ubuntu1 [560 kB] Get:26 http://ftpmaster.internal/ubuntu/ oneiric/main autotools-dev all 20110511.1 [44.7 kB] Get:27 http://ftpmaster.internal/ubuntu/ oneiric/main automake all 1:1.11.1-1ubuntu1 [544 kB] Get:28 http://ftpmaster.internal/ubuntu/ oneiric/main html2text armel 1.3.2a-15 [94.3 kB] Get:29 http://ftpmaster.internal/ubuntu/ oneiric/main libcroco3 armel 0.6.2-1 [89.5 kB] Get:30 http://ftpmaster.internal/ubuntu/ oneiric/main libunistring0 armel 0.9.3-4 [394 kB] Get:31 http://ftpmaster.internal/ubuntu/ oneiric/main gettext armel 0.18.1.1-3ubuntu1 [1156 kB] Get:32 http://ftpmaster.internal/ubuntu/ oneiric/main intltool-debian all 0.35.0+20060710.1 [31.6 kB] Get:33 http://ftpmaster.internal/ubuntu/ oneiric/main po-debconf all 1.0.16+nmu1 [212 kB] Get:34 http://ftpmaster.internal/ubuntu/ oneiric/main debhelper all 8.1.6ubuntu1 [484 kB] Get:35 http://ftpmaster.internal/ubuntu/ oneiric/main fdupes armel 1.50-PR2-3 [20.9 kB] Get:36 http://ftpmaster.internal/ubuntu/ oneiric/main intltool all 0.41.1-1 [103 kB] Get:37 http://ftpmaster.internal/ubuntu/ oneiric/main dh-translations all 97 [18.6 kB] Get:38 http://ftpmaster.internal/ubuntu/ oneiric/main python-scour all 0.25+bzr207-2.1 [45.7 kB] Get:39 http://ftpmaster.internal/ubuntu/ oneiric/main cdbs all 0.4.93ubuntu2 [48.2 kB] Get:40 http://ftpmaster.internal/ubuntu/ oneiric/main libpthread-stubs0 armel 0.3-2 [3200 B] Get:41 http://ftpmaster.internal/ubuntu/ oneiric/main libpthread-stubs0-dev armel 0.3-2 [2424 B] Get:42 http://ftpmaster.internal/ubuntu/ oneiric/main libtool armel 2.4-2ubuntu1 [301 kB] Get:43 http://ftpmaster.internal/ubuntu/ oneiric/main x11proto-core-dev all 7.0.21-2 [297 kB] Get:44 http://ftpmaster.internal/ubuntu/ oneiric/main libxau-dev armel 1:1.0.6-1ubuntu1 [11.7 kB] Get:45 http://ftpmaster.internal/ubuntu/ oneiric/main libxdmcp-dev armel 1:1.1.0-1ubuntu1 [44.2 kB] Get:46 http://ftpmaster.internal/ubuntu/ oneiric/main libxcb1-dev armel 1.7-2ubuntu2 [73.7 kB] Get:47 http://ftpmaster.internal/ubuntu/ oneiric/main pkg-config armel 0.25-1.1ubuntu1 [38.5 kB] Get:48 http://ftpmaster.internal/ubuntu/ oneiric/main xutils-dev armel 1:7.6+3 [332 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 12.0 MB in 1s (6097 kB/s) Selecting previously deselected package libexpat1. (Reading database ... 14096 files and directories currently installed.) Unpacking libexpat1 (from .../libexpat1_2.0.1-7ubuntu3_armel.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.7.4-2ubuntu5_armel.deb) ... Selecting previously deselected package libxau6. Unpacking libxau6 (from .../libxau6_1%3a1.0.6-1ubuntu1_armel.deb) ... Selecting previously deselected package libxdmcp6. Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.1.0-1ubuntu1_armel.deb) ... Selecting previously deselected package libxcb1. Unpacking libxcb1 (from .../libxcb1_1.7-2ubuntu2_armel.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_5.04-5ubuntu2_armel.deb) ... Selecting previously deselected package file. Unpacking file (from .../file_5.04-5ubuntu2_armel.deb) ... Selecting previously deselected package libpopt0. Unpacking libpopt0 (from .../libpopt0_1.16-1_armel.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.51-1ubuntu1_all.deb) ... Selecting previously deselected package python2.7. Unpacking python2.7 (from .../python2.7_2.7.1-5ubuntu2_armel.deb) ... Selecting previously deselected package python. Unpacking python (from .../python_2.7.1-0ubuntu5_all.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.2.2_armel.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.18.1.1-3ubuntu1_armel.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.21-5_armel.deb) ... Selecting previously deselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.58-1_all.deb) ... Selecting previously deselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously deselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.68-1build1_armel.deb) ... Selecting previously deselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_4.2-1_all.deb) ... Selecting previously deselected package libpipeline1. Unpacking libpipeline1 (from .../libpipeline1_1.2.0-1_armel.deb) ... Selecting previously deselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_5.837-1_all.deb) ... Selecting previously deselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.36-1.1build4_armel.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.8.dfsg-2_armel.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.6.0.2-1_armel.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../archives/m4_1.4.16-1_armel.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.68-1ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20110511.1_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.11.1-1ubuntu1_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-15_armel.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_armel.deb) ... Selecting previously deselected package libunistring0. Unpacking libunistring0 (from .../libunistring0_0.9.3-4_armel.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.18.1.1-3ubuntu1_armel.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16+nmu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_8.1.6ubuntu1_all.deb) ... Selecting previously deselected package fdupes. Unpacking fdupes (from .../fdupes_1.50-PR2-3_armel.deb) ... Selecting previously deselected package intltool. Unpacking intltool (from .../intltool_0.41.1-1_all.deb) ... Selecting previously deselected package dh-translations. Unpacking dh-translations (from .../dh-translations_97_all.deb) ... Selecting previously deselected package python-scour. Unpacking python-scour (from .../python-scour_0.25+bzr207-2.1_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.93ubuntu2_all.deb) ... Selecting previously deselected package libpthread-stubs0. Unpacking libpthread-stubs0 (from .../libpthread-stubs0_0.3-2_armel.deb) ... Selecting previously deselected package libpthread-stubs0-dev. Unpacking libpthread-stubs0-dev (from .../libpthread-stubs0-dev_0.3-2_armel.deb) ... Selecting previously deselected package libtool. Unpacking libtool (from .../libtool_2.4-2ubuntu1_armel.deb) ... Selecting previously deselected package x11proto-core-dev. Unpacking x11proto-core-dev (from .../x11proto-core-dev_7.0.21-2_all.deb) ... Selecting previously deselected package libxau-dev. Unpacking libxau-dev (from .../libxau-dev_1%3a1.0.6-1ubuntu1_armel.deb) ... Selecting previously deselected package libxdmcp-dev. Unpacking libxdmcp-dev (from .../libxdmcp-dev_1%3a1.1.0-1ubuntu1_armel.deb) ... Selecting previously deselected package libxcb1-dev. Unpacking libxcb1-dev (from .../libxcb1-dev_1.7-2ubuntu2_armel.deb) ... Selecting previously deselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.25-1.1ubuntu1_armel.deb) ... Selecting previously deselected package xutils-dev. Unpacking xutils-dev (from .../xutils-dev_1%3a7.6+3_armel.deb) ... Setting up libexpat1 (2.0.1-7ubuntu3) ... Setting up libsqlite3-0 (3.7.4-2ubuntu5) ... Setting up libxau6 (1:1.0.6-1ubuntu1) ... Setting up libxdmcp6 (1:1.1.0-1ubuntu1) ... Setting up libxcb1 (1.7-2ubuntu2) ... Setting up libmagic1 (5.04-5ubuntu2) ... Setting up file (5.04-5ubuntu2) ... Setting up libpopt0 (1.16-1) ... Setting up mime-support (3.51-1ubuntu1) ... update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode. Setting up python2.7 (2.7.1-5ubuntu2) ... Setting up python (2.7.1-0ubuntu5) ... Setting up bsdmainutils (8.2.2) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode. Setting up gettext-base (0.18.1.1-3ubuntu1) ... Setting up groff-base (1.21-5) ... Setting up liburi-perl (1.58-1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up libhtml-parser-perl (3.68-1build1) ... Setting up libhtml-tree-perl (4.2-1) ... Setting up libpipeline1 (1.2.0-1) ... Setting up libwww-perl (5.837-1) ... Setting up libxml-parser-perl (2.36-1.1build4) ... Setting up libxml2 (2.7.8.dfsg-2) ... Setting up man-db (2.6.0.2-1) ... Building database of manual pages ... Setting up m4 (1.4.16-1) ... Setting up autoconf (2.68-1ubuntu1) ... Setting up autotools-dev (20110511.1) ... Setting up automake (1:1.11.1-1ubuntu1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode. Setting up html2text (1.3.2a-15) ... Setting up libcroco3 (0.6.2-1) ... Setting up libunistring0 (0.9.3-4) ... Setting up gettext (0.18.1.1-3ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16+nmu1) ... Setting up debhelper (8.1.6ubuntu1) ... Setting up fdupes (1.50-PR2-3) ... Setting up intltool (0.41.1-1) ... Setting up dh-translations (97) ... Setting up python-scour (0.25+bzr207-2.1) ... Setting up cdbs (0.4.93ubuntu2) ... Setting up libpthread-stubs0 (0.3-2) ... Setting up libpthread-stubs0-dev (0.3-2) ... Setting up libtool (2.4-2ubuntu1) ... Setting up x11proto-core-dev (7.0.21-2) ... Setting up libxau-dev (1:1.0.6-1ubuntu1) ... Setting up libxdmcp-dev (1:1.1.0-1ubuntu1) ... Setting up libxcb1-dev (1.7-2ubuntu2) ... Setting up pkg-config (0.25-1.1ubuntu1) ... Setting up xutils-dev (1:7.6+3) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.13-2ubuntu1 make_3.81-8ubuntu1 dpkg-dev_1.16.0~ubuntu8 gcc-4.6_4.6.0-6ubuntu3 g++-4.6_4.6.0-6ubuntu3 binutils_2.21.51.20110421-0ubuntu6 libstdc++6_4.6.0-6ubuntu3 libstdc++6-4.6-dev_4.6.0-6ubuntu3 ------------------------------------------------------------------------------ dpkg-source: warning: -sn is not a valid option for Dpkg::Source::Package::V3::quilt gpgv: Signature made Fri May 6 13:00:00 2011 UTC using DSA key ID 5E3619D3 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./xcb-util-keysyms_0.3.8-1.dsc dpkg-source: info: extracting xcb-util-keysyms in xcb-util-keysyms-0.3.8 dpkg-source: info: unpacking xcb-util-keysyms_0.3.8.orig.tar.gz dpkg-source: info: unpacking xcb-util-keysyms_0.3.8-1.debian.tar.gz dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package xcb-util-keysyms dpkg-buildpackage: source version 0.3.8-1 dpkg-source --before-build xcb-util-keysyms-0.3.8 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean test -x debian/rules dh_testroot rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . -k distclean make[1]: Entering directory `/build/buildd/xcb-util-keysyms-0.3.8' make[1]: *** No rule to make target `distclean'. make[1]: Leaving directory `/build/buildd/xcb-util-keysyms-0.3.8' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-autotools rmdir --ignore-fail-on-non-empty . rmdir: failed to remove `.': Invalid argument make: [makefile-clean] Error 1 (ignored) rm -f configure-stamp # Specific to Git Debian package rm -f Doxyfile .gitmodules autogen.sh \ m4/xcb_util_m4_with_include_path.m4 for i in ./config.guess ./config.sub ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done dh_clean rm -f debian/stamp-autotools-files debian/rules build test -x debian/rules mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi test -f configure || sh ./autogen.sh --build=arm-linux-gnueabi --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/xcb-util-keysyms" --srcdir=. --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules touch configure-stamp touch debian/stamp-autotools-files chmod a+x /build/buildd/xcb-util-keysyms-0.3.8/./configure mkdir -p . cd . && CFLAGS="-g -O2 -g -O2 -Wall" CXXFLAGS="-g -O2 -g -O2 -Wall" CPPFLAGS="" LDFLAGS="-Wl,-Bsymbolic-functions" /build/buildd/xcb-util-keysyms-0.3.8/./configure --build=arm-linux-gnueabi --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/xcb-util-keysyms" --srcdir=. --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... arm-unknown-linux-gnueabi checking host system type... arm-unknown-linux-gnueabi checking how to print strings... printf checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... none checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 805306365 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert arm-unknown-linux-gnueabi file names to arm-unknown-linux-gnueabi format... func_convert_file_noop checking how to convert arm-unknown-linux-gnueabi file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for gcc option to accept ISO C99... -std=gnu99 checking for XCB... yes checking whether libxcb was compiled against xcb-proto >= 1.6... checking for gawk... (cached) mawk yes checking whether to build developer documentation... yes checking for doxygen... no configure: WARNING: doxygen not found - documentation targets will be skipped checking for XPROTO... yes configure: creating ./config.status config.status: creating Makefile config.status: creating keysyms/Makefile config.status: creating keysyms/xcb-keysyms.pc config.status: creating xcb_util_intro config.status: executing depfiles commands config.status: executing libtool commands touch debian/stamp-autotools /usr/bin/make -C . make[1]: Entering directory `/build/buildd/xcb-util-keysyms-0.3.8' Making all in keysyms make[2]: Entering directory `/build/buildd/xcb-util-keysyms-0.3.8/keysyms' \ # source='keysyms.c' object='libxcb_keysyms_la-keysyms.lo' libtool=yes /bin/bash ../libtool --tag=CC --mode=compile gcc -std=gnu99 -DPACKAGE_NAME=\"xcb-util-keysyms\" -DPACKAGE_TARNAME=\"xcb-util-keysyms\" -DPACKAGE_VERSION=\"0.3.8\" -DPACKAGE_STRING=\"xcb-util-keysyms\ 0.3.8\" -DPACKAGE_BUGREPORT=\"xcb@lists.freedesktop.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"xcb-util-keysyms\" -DVERSION=\"0.3.8\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DPACKAGE_VERSION_MAJOR=0 -DPACKAGE_VERSION_MINOR=3 -DPACKAGE_VERSION_PATCHLEVEL=8 -I. -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -Wbad-function-cast -Wformat=2 -Wold-style-definition -Wdeclaration-after-statement -g -O2 -g -O2 -Wall -c -o libxcb_keysyms_la-keysyms.lo `test -f 'keysyms.c' || echo './'`keysyms.c libtool: compile: gcc -std=gnu99 -DPACKAGE_NAME=\"xcb-util-keysyms\" -DPACKAGE_TARNAME=\"xcb-util-keysyms\" -DPACKAGE_VERSION=\"0.3.8\" "-DPACKAGE_STRING=\"xcb-util-keysyms 0.3.8\"" -DPACKAGE_BUGREPORT=\"xcb@lists.freedesktop.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"xcb-util-keysyms\" -DVERSION=\"0.3.8\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DPACKAGE_VERSION_MAJOR=0 -DPACKAGE_VERSION_MINOR=3 -DPACKAGE_VERSION_PATCHLEVEL=8 -I. -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -Wbad-function-cast -Wformat=2 -Wold-style-definition -Wdeclaration-after-statement -g -O2 -g -O2 -Wall -c keysyms.c -fPIC -DPIC -o .libs/libxcb_keysyms_la-keysyms.o libtool: compile: gcc -std=gnu99 -DPACKAGE_NAME=\"xcb-util-keysyms\" -DPACKAGE_TARNAME=\"xcb-util-keysyms\" -DPACKAGE_VERSION=\"0.3.8\" "-DPACKAGE_STRING=\"xcb-util-keysyms 0.3.8\"" -DPACKAGE_BUGREPORT=\"xcb@lists.freedesktop.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"xcb-util-keysyms\" -DVERSION=\"0.3.8\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DPACKAGE_VERSION_MAJOR=0 -DPACKAGE_VERSION_MINOR=3 -DPACKAGE_VERSION_PATCHLEVEL=8 -I. -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -Wbad-function-cast -Wformat=2 -Wold-style-definition -Wdeclaration-after-statement -g -O2 -g -O2 -Wall -c keysyms.c -o libxcb_keysyms_la-keysyms.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=link gcc -std=gnu99 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -Wbad-function-cast -Wformat=2 -Wold-style-definition -Wdeclaration-after-statement -g -O2 -g -O2 -Wall -version-info 1:0:0 -no-undefined -Wl,-Bsymbolic-functions -o libxcb-keysyms.la -rpath /usr/lib libxcb_keysyms_la-keysyms.lo -L/usr/lib/arm-linux-gnueabi -lxcb libtool: link: gcc -shared -fPIC -DPIC .libs/libxcb_keysyms_la-keysyms.o -L/usr/lib/arm-linux-gnueabi -lxcb -O2 -O2 -Wl,-Bsymbolic-functions -Wl,-soname -Wl,libxcb-keysyms.so.1 -o .libs/libxcb-keysyms.so.1.0.0 libtool: link: (cd ".libs" && rm -f "libxcb-keysyms.so.1" && ln -s "libxcb-keysyms.so.1.0.0" "libxcb-keysyms.so.1") libtool: link: (cd ".libs" && rm -f "libxcb-keysyms.so" && ln -s "libxcb-keysyms.so.1.0.0" "libxcb-keysyms.so") libtool: link: ar cru .libs/libxcb-keysyms.a libxcb_keysyms_la-keysyms.o libtool: link: ranlib .libs/libxcb-keysyms.a libtool: link: ( cd ".libs" && rm -f "libxcb-keysyms.la" && ln -s "../libxcb-keysyms.la" "libxcb-keysyms.la" ) make[2]: Leaving directory `/build/buildd/xcb-util-keysyms-0.3.8/keysyms' make[2]: Entering directory `/build/buildd/xcb-util-keysyms-0.3.8' make[2]: Nothing to be done for `all-am'. make[2]: Leaving directory `/build/buildd/xcb-util-keysyms-0.3.8' make[1]: Leaving directory `/build/buildd/xcb-util-keysyms-0.3.8' touch debian/stamp-makefile-build DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/fakeroot debian/rules binary-arch test -x debian/rules dh_testroot dh_clean -k dh_clean: dh_clean -k is deprecated; use dh_prep instead dh_installdirs -A mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/make -C . install DESTDIR=/build/buildd/xcb-util-keysyms-0.3.8/debian/tmp/ make[1]: Entering directory `/build/buildd/xcb-util-keysyms-0.3.8' Making install in keysyms make[2]: Entering directory `/build/buildd/xcb-util-keysyms-0.3.8/keysyms' make[3]: Entering directory `/build/buildd/xcb-util-keysyms-0.3.8/keysyms' test -z "/usr/lib" || /bin/mkdir -p "/build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib" /bin/bash ../libtool --mode=install /usr/bin/install -c libxcb-keysyms.la '/build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib' libtool: install: /usr/bin/install -c .libs/libxcb-keysyms.so.1.0.0 /build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib/libxcb-keysyms.so.1.0.0 libtool: install: (cd /build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib && { ln -s -f libxcb-keysyms.so.1.0.0 libxcb-keysyms.so.1 || { rm -f libxcb-keysyms.so.1 && ln -s libxcb-keysyms.so.1.0.0 libxcb-keysyms.so.1; }; }) libtool: install: (cd /build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib && { ln -s -f libxcb-keysyms.so.1.0.0 libxcb-keysyms.so || { rm -f libxcb-keysyms.so && ln -s libxcb-keysyms.so.1.0.0 libxcb-keysyms.so; }; }) libtool: install: /usr/bin/install -c .libs/libxcb-keysyms.lai /build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib/libxcb-keysyms.la libtool: install: /usr/bin/install -c .libs/libxcb-keysyms.a /build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib/libxcb-keysyms.a libtool: install: chmod 644 /build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib/libxcb-keysyms.a libtool: install: ranlib /build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib/libxcb-keysyms.a libtool: install: warning: remember to run `libtool --finish /usr/lib' test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib/pkgconfig" /usr/bin/install -c -m 644 xcb-keysyms.pc '/build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/lib/pkgconfig' test -z "/usr/include/xcb" || /bin/mkdir -p "/build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/include/xcb" /usr/bin/install -c -m 644 xcb_keysyms.h '/build/buildd/xcb-util-keysyms-0.3.8/debian/tmp//usr/include/xcb' make[3]: Leaving directory `/build/buildd/xcb-util-keysyms-0.3.8/keysyms' make[2]: Leaving directory `/build/buildd/xcb-util-keysyms-0.3.8/keysyms' make[2]: Entering directory `/build/buildd/xcb-util-keysyms-0.3.8' make[3]: Entering directory `/build/buildd/xcb-util-keysyms-0.3.8' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/xcb-util-keysyms-0.3.8' make[2]: Leaving directory `/build/buildd/xcb-util-keysyms-0.3.8' make[1]: Leaving directory `/build/buildd/xcb-util-keysyms-0.3.8' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/libxcb-keysyms1.substvars dh_installdirs -plibxcb-keysyms1 Adding cdbs dependencies to debian/libxcb-keysyms1-dev.substvars dh_installdirs -plibxcb-keysyms1-dev dh_installdocs -plibxcb-keysyms1 ./README ./NEWS dh_installexamples -plibxcb-keysyms1 dh_installman -plibxcb-keysyms1 dh_installinfo -plibxcb-keysyms1 dh_installmenu -plibxcb-keysyms1 dh_installcron -plibxcb-keysyms1 dh_installinit -plibxcb-keysyms1 Duplicate specification "O=s" for option "O" dh_installdebconf -plibxcb-keysyms1 dh_installemacsen -plibxcb-keysyms1 dh_installcatalogs -plibxcb-keysyms1 dh_installpam -plibxcb-keysyms1 dh_installlogrotate -plibxcb-keysyms1 dh_installlogcheck -plibxcb-keysyms1 dh_installgsettings -plibxcb-keysyms1 dh_installchangelogs -plibxcb-keysyms1 ./ChangeLog dh_installudev -plibxcb-keysyms1 dh_lintian -plibxcb-keysyms1 dh_bugfiles -plibxcb-keysyms1 dh_install -plibxcb-keysyms1 --sourcedir=debian/tmp dh_link -plibxcb-keysyms1 dh_installmime -plibxcb-keysyms1 dh_installdocs -plibxcb-keysyms1-dev ./README ./NEWS dh_installexamples -plibxcb-keysyms1-dev dh_installman -plibxcb-keysyms1-dev dh_installinfo -plibxcb-keysyms1-dev dh_installmenu -plibxcb-keysyms1-dev dh_installcron -plibxcb-keysyms1-dev dh_installinit -plibxcb-keysyms1-dev Duplicate specification "O=s" for option "O" dh_installdebconf -plibxcb-keysyms1-dev dh_installemacsen -plibxcb-keysyms1-dev dh_installcatalogs -plibxcb-keysyms1-dev dh_installpam -plibxcb-keysyms1-dev dh_installlogrotate -plibxcb-keysyms1-dev dh_installlogcheck -plibxcb-keysyms1-dev dh_installgsettings -plibxcb-keysyms1-dev dh_installchangelogs -plibxcb-keysyms1-dev ./ChangeLog dh_installudev -plibxcb-keysyms1-dev dh_lintian -plibxcb-keysyms1-dev dh_bugfiles -plibxcb-keysyms1-dev dh_install -plibxcb-keysyms1-dev --sourcedir=debian/tmp dh_link -plibxcb-keysyms1-dev dh_installmime -plibxcb-keysyms1-dev dh_strip -plibxcb-keysyms1 dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: libxcb-keysyms1 libxcb-keysyms1-dev dh_strip debug symbol extraction: packages to act on: libxcb-keysyms1 dh_strip debug symbol extraction: ignored packages: dpkg-deb: building package `libxcb-keysyms1-dbgsym' in `../libxcb-keysyms1-dbgsym_0.3.8-1_armel.ddeb'. dh_compress -plibxcb-keysyms1 dh_fixperms -plibxcb-keysyms1 dh_makeshlibs -plibxcb-keysyms1 -V dh_strip -plibxcb-keysyms1-dev dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: libxcb-keysyms1 libxcb-keysyms1-dev dh_strip debug symbol extraction: packages to act on: libxcb-keysyms1-dev dh_strip debug symbol extraction: ignored packages: libxcb-keysyms1-dev is already stripped, ignoring dh_compress -plibxcb-keysyms1-dev dh_fixperms -plibxcb-keysyms1-dev dh_makeshlibs -plibxcb-keysyms1-dev -V dh_installdeb -plibxcb-keysyms1 dh_perl -plibxcb-keysyms1 dh_shlibdeps -plibxcb-keysyms1 dh_installdeb -plibxcb-keysyms1-dev dh_perl -plibxcb-keysyms1-dev dh_shlibdeps -plibxcb-keysyms1-dev dh_gencontrol -plibxcb-keysyms1 # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibxcb-keysyms1 ; fi dh_link -p libxcb-keysyms1 dh_md5sums -plibxcb-keysyms1 dh_builddeb -plibxcb-keysyms1 INFO: pkgstriptranslations version 97 pkgstriptranslations: processing control file: ./debian/libxcb-keysyms1/DEBIAN/control, package libxcb-keysyms1, directory ./debian/libxcb-keysyms1 pkgstriptranslations: libxcb-keysyms1 does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libxcb-keysyms1/DEBIAN/control, package libxcb-keysyms1, directory debian/libxcb-keysyms1 .. removing usr/share/doc/libxcb-keysyms1/changelog.gz pkgstripfiles: Truncating changelog to topmost ten records dpkg-deb: warning: 'debian/libxcb-keysyms1/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `libxcb-keysyms1' in `../libxcb-keysyms1_0.3.8-1_armel.deb'. dh_gencontrol -plibxcb-keysyms1-dev # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibxcb-keysyms1-dev ; fi dh_link -p libxcb-keysyms1-dev dh_md5sums -plibxcb-keysyms1-dev dh_builddeb -plibxcb-keysyms1-dev INFO: pkgstriptranslations version 97 pkgstriptranslations: processing control file: ./debian/libxcb-keysyms1-dev/DEBIAN/control, package libxcb-keysyms1-dev, directory ./debian/libxcb-keysyms1-dev pkgstriptranslations: libxcb-keysyms1-dev does not contain translations, skipping pkgstriptranslations: processing control file: ./debian/libxcb-keysyms1/DEBIAN/control, package libxcb-keysyms1, directory ./debian/libxcb-keysyms1 pkgstriptranslations: libxcb-keysyms1 does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libxcb-keysyms1-dev/DEBIAN/control, package libxcb-keysyms1-dev, directory debian/libxcb-keysyms1-dev .. removing usr/share/doc/libxcb-keysyms1-dev/changelog.gz pkgstripfiles: Truncating changelog to topmost ten records Searching for duplicated docs in dependency libxcb-keysyms1... symlinking changelog.Debian.gz in libxcb-keysyms1-dev to file in libxcb-keysyms1 symlinking README in libxcb-keysyms1-dev to file in libxcb-keysyms1 symlinking NEWS.gz in libxcb-keysyms1-dev to file in libxcb-keysyms1 dpkg-deb: warning: 'debian/libxcb-keysyms1-dev/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `libxcb-keysyms1-dev' in `../libxcb-keysyms1-dev_0.3.8-1_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../xcb-util-keysyms_0.3.8-1_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-source --after-build xcb-util-keysyms-0.3.8 dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20110512-1033 Publishing debug debs. chroot-autobuild/build/buildd/libxcb-keysyms1_0.3.8-1_armel.deb: new debian package, version 2.0. size 7264 bytes: control archive= 1091 bytes. 981 bytes, 22 lines control 367 bytes, 5 lines md5sums 135 bytes, 7 lines * postinst #!/bin/sh 132 bytes, 7 lines * postrm #!/bin/sh 44 bytes, 1 lines shlibs Package: libxcb-keysyms1 Source: xcb-util-keysyms Version: 0.3.8-1 Architecture: armel Maintainer: Ubuntu Developers Original-Maintainer: Debian X Strike Force Installed-Size: 72 Depends: libc6 (>= 2.4), libxcb1 Section: libs Priority: extra Homepage: http://xcb.freedesktop.org Description: utility libraries for X C Binding -- keysyms This package contains the library files needed to run software using libxcb-keysyms, providing standard X key constants and conversion to/from keycodes. . The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib. chroot-autobuild/build/buildd/libxcb-keysyms1-dev_0.3.8-1_armel.deb: new debian package, version 2.0. size 5484 bytes: control archive= 990 bytes. 1019 bytes, 22 lines control 507 bytes, 7 lines md5sums Package: libxcb-keysyms1-dev Source: xcb-util-keysyms Version: 0.3.8-1 Architecture: armel Maintainer: Ubuntu Developers Original-Maintainer: Debian X Strike Force Installed-Size: 76 Depends: libxcb-keysyms1 (= 0.3.8-1), libxcb1-dev Section: libdevel Priority: extra Homepage: http://xcb.freedesktop.org Description: utility libraries for X C Binding -- keysyms This package contains the header and library files needed to build software using libxcb-keysyms, providing standard X key constants and conversion to/from keycodes. . The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib. chroot-autobuild/build/buildd/libxcb-keysyms1_0.3.8-1_armel.deb: drwxr-xr-x root/root 0 2011-05-12 10:31 ./ drwxr-xr-x root/root 0 2011-05-12 10:31 ./usr/ drwxr-xr-x root/root 0 2011-05-12 10:32 ./usr/lib/ -rw-r--r-- root/root 5416 2011-05-12 10:31 ./usr/lib/libxcb-keysyms.so.1.0.0 drwxr-xr-x root/root 0 2011-05-12 10:31 ./usr/share/ drwxr-xr-x root/root 0 2011-05-12 10:31 ./usr/share/doc/ drwxr-xr-x root/root 0 2011-05-12 10:32 ./usr/share/doc/libxcb-keysyms1/ -rw-r--r-- root/root 715 2011-05-12 10:32 ./usr/share/doc/libxcb-keysyms1/changelog.Debian.gz -rw-r--r-- root/root 1409 2011-03-26 04:41 ./usr/share/doc/libxcb-keysyms1/README -rw-r--r-- root/root 183 2011-04-25 16:04 ./usr/share/doc/libxcb-keysyms1/NEWS.gz -rw-r--r-- root/root 2044 2011-05-06 11:16 ./usr/share/doc/libxcb-keysyms1/copyright lrwxrwxrwx root/root 0 2011-05-12 10:32 ./usr/lib/libxcb-keysyms.so.1 -> libxcb-keysyms.so.1.0.0 chroot-autobuild/build/buildd/libxcb-keysyms1-dev_0.3.8-1_armel.deb: drwxr-xr-x root/root 0 2011-05-12 10:31 ./ drwxr-xr-x root/root 0 2011-05-12 10:31 ./usr/ drwxr-xr-x root/root 0 2011-05-12 10:31 ./usr/include/ drwxr-xr-x root/root 0 2011-05-12 10:31 ./usr/include/xcb/ -rw-r--r-- root/root 2082 2011-05-12 10:31 ./usr/include/xcb/xcb_keysyms.h drwxr-xr-x root/root 0 2011-05-12 10:32 ./usr/lib/ drwxr-xr-x root/root 0 2011-05-12 10:31 ./usr/lib/pkgconfig/ -rw-r--r-- root/root 227 2011-05-12 10:31 ./usr/lib/pkgconfig/xcb-keysyms.pc -rw-r--r-- root/root 3820 2011-05-12 10:31 ./usr/lib/libxcb-keysyms.a drwxr-xr-x root/root 0 2011-05-12 10:31 ./usr/share/ drwxr-xr-x root/root 0 2011-05-12 10:31 ./usr/share/doc/ drwxr-xr-x root/root 0 2011-05-12 10:33 ./usr/share/doc/libxcb-keysyms1-dev/ -rw-r--r-- root/root 2044 2011-05-06 11:16 ./usr/share/doc/libxcb-keysyms1-dev/copyright lrwxrwxrwx root/root 0 2011-05-12 10:32 ./usr/lib/libxcb-keysyms.so -> libxcb-keysyms.so.1.0.0 lrwxrwxrwx root/root 0 2011-05-12 10:33 ./usr/share/doc/libxcb-keysyms1-dev/changelog.Debian.gz -> ../libxcb-keysyms1/changelog.Debian.gz lrwxrwxrwx root/root 0 2011-05-12 10:33 ./usr/share/doc/libxcb-keysyms1-dev/README -> ../libxcb-keysyms1/README lrwxrwxrwx root/root 0 2011-05-12 10:33 ./usr/share/doc/libxcb-keysyms1-dev/NEWS.gz -> ../libxcb-keysyms1/NEWS.gz xcb-util-keysyms_0.3.8-1_armel.changes: Format: 1.8 Date: Fri, 06 May 2011 21:55:24 +0900 Source: xcb-util-keysyms Binary: libxcb-keysyms1 libxcb-keysyms1-dev Architecture: armel Version: 0.3.8-1 Distribution: oneiric Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: Arnaud Fontaine Description: libxcb-keysyms1 - utility libraries for X C Binding -- keysyms libxcb-keysyms1-dev - utility libraries for X C Binding -- keysyms Changes: xcb-util-keysyms (0.3.8-1) unstable; urgency=low . * New upstream release. + xcb-util has been split up into several modules, so rename source package. * debian/control: + Bump Standards-Version to 3.9.2. No changes needed. + Now maintain as part of pkg-xorg team. * Switch to "3.0 (quilt)" source format. Checksums-Sha1: 10b0d6fd2c4ef2e0a630a40e599de94d8e1f67b1 7264 libxcb-keysyms1_0.3.8-1_armel.deb a0d6caf92c29a47dd17e66395e5422fbbd8eba26 5484 libxcb-keysyms1-dev_0.3.8-1_armel.deb Checksums-Sha256: 88192c82536aba6257862954086ec3db55c110550408f9a02e63cf972ae47739 7264 libxcb-keysyms1_0.3.8-1_armel.deb b3c97dee43036192be492b13397620e7aead5dd0613b4e9d4a585e50f502197d 5484 libxcb-keysyms1-dev_0.3.8-1_armel.deb Files: eedaffb957bc8efa632d11cb38073cb2 7264 libs extra libxcb-keysyms1_0.3.8-1_armel.deb 319cf0a2fbe0fc2087a5d95d1ab75dd0 5484 libdevel extra libxcb-keysyms1-dev_0.3.8-1_armel.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/xcb-util-keysyms-0.3.8 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge groff-base mime-support m4 libxdmcp-dev x11proto-core-dev gettext file libhtml-parser-perl intltool libxcb1-dev libwww-perl liburi-perl libxdmcp6 libhtml-tree-perl autotools-dev po-debconf dh-translations libxml-parser-perl libcroco3 libhtml-tagset-perl libxml2 libpopt0 pkg-config automake python-scour man-db libtool intltool-debian python2.7 libxcb1 libpthread-stubs0-dev cdbs libxau-dev html2text gettext-base debhelper libpthread-stubs0 xutils-dev libunistring0 python libmagic1 libpipeline1 libexpat1 libsqlite3-0 bsdmainutils fdupes libxau6 autoconf (Reading database ... 16881 files and directories currently installed.) Removing libxcb1-dev ... Removing pkg-config ... Removing libtool ... Removing libxcb1 ... Purging configuration files for libxcb1 ... Removing libpthread-stubs0-dev ... Removing cdbs ... Removing libxau-dev ... Removing libpthread-stubs0 ... Removing xutils-dev ... Removing fdupes ... Removing libxau6 ... Purging configuration files for libxau6 ... Removing libxdmcp-dev ... Removing x11proto-core-dev ... Removing libxdmcp6 ... Purging configuration files for libxdmcp6 ... Removing dh-translations ... Removing libpopt0 ... Purging configuration files for libpopt0 ... Removing python-scour ... Removing debhelper ... Removing python ... Purging configuration files for python ... Removing intltool ... Removing po-debconf ... Removing libxml-parser-perl ... Removing automake ... Removing man-db ... Purging configuration files for man-db ... Removing catpages as well as /var/cache/man hierarchy. Removing intltool-debian ... Removing python2.7 ... Purging configuration files for python2.7 ... Removing html2text ... Purging configuration files for html2text ... Removing libpipeline1 ... Purging configuration files for libpipeline1 ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing libsqlite3-0 ... Purging configuration files for libsqlite3-0 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing autoconf ... Purging configuration files for autoconf ... Removing groff-base ... Purging configuration files for groff-base ... Removing mime-support ... Purging configuration files for mime-support ... Removing m4 ... Removing gettext ... Removing file ... Removing libwww-perl ... Removing libhtml-tree-perl ... Removing autotools-dev ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing gettext-base ... Removing libunistring0 ... Purging configuration files for libunistring0 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libhtml-parser-perl ... Removing liburi-perl ... Removing libhtml-tagset-perl ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20110512-1033 Build needed 00:02:55, 2324k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '3ac8ccb1409749eade7c5381f98a4de037a8154a'] Scanning for processes to kill in build /home/buildd/build-3ac8ccb1409749eade7c5381f98a4de037a8154a/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '3ac8ccb1409749eade7c5381f98a4de037a8154a'] Unmounting chroot for build 3ac8ccb1409749eade7c5381f98a4de037a8154a... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '3ac8ccb1409749eade7c5381f98a4de037a8154a'] Removing build 3ac8ccb1409749eade7c5381f98a4de037a8154a