RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '885415-2029188', '/home/buildd/filecache-default/f28143af393ef033007e86c52899a6dd1bf93eb6'] Synching the system clock with the buildd NTP service... 27 Feb 20:00:11 ntpdate[12973]: adjust time server 10.211.37.1 offset 0.046368 sec Unpacking chroot for build 885415-2029188 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '885415-2029188'] Mounting chroot for build 885415-2029188 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '885415-2029188', 'main'] Attempting OGRE for main in build-885415-2029188 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '885415-2029188', 'deb http://ftpmaster.internal/ubuntu jaunty main'] Overriding sources.list in build-885415-2029188 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '885415-2029188'] Updating debian chroot for build 885415-2029188 Get:1 http://ftpmaster.internal jaunty Release.gpg [189B] Get:2 http://ftpmaster.internal jaunty Release [74.6kB] Ign http://ftpmaster.internal jaunty/main Packages/DiffIndex Get:3 http://ftpmaster.internal jaunty/main Packages [1233kB] Fetched 1308kB in 5s (250kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: file libgpm2 libmagic1 libncursesw5 libreadline5 libsqlite3-0 libssl0.9.8 mime-support python2.6 python2.6-minimal readline-common The following packages will be upgraded: debconf debconf-english initscripts libc6 libc6-dev libgmp3c2 libvolume-id1 linux-libc-dev python-minimal sysvinit-utils 10 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/16.1MB of archives. After this operation, 25.2MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! linux-libc-dev libc6-dev libc6 python2.6-minimal python-minimal sysvinit-utils debconf-english debconf libvolume-id1 libmagic1 file libgpm2 libncursesw5 readline-common libreadline5 libsqlite3-0 libssl0.9.8 mime-support initscripts libgmp3c2 python2.6 Preconfiguring packages ... Authentication warning overridden. (Reading database ... 9070 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.28-8.24 (using .../linux-libc-dev_2.6.28-8.26_armel.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libc6-dev 2.9-0ubuntu11 (using .../libc6-dev_2.9-0ubuntu12_armel.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc6 2.9-0ubuntu11 (using .../libc6_2.9-0ubuntu12_armel.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.9-0ubuntu12) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place Selecting previously deselected package python2.6-minimal. (Reading database ... 9070 files and directories currently installed.) Unpacking python2.6-minimal (from .../python2.6-minimal_2.6.1-0ubuntu9_armel.deb) ... Setting up python2.6-minimal (2.6.1-0ubuntu9) ... Could not find platform dependent libraries Consider setting $PYTHONHOME to [:] (Reading database ... 9227 files and directories currently installed.) Preparing to replace python-minimal 2.5.4-0ubuntu3 (using .../python-minimal_2.6.1-0ubuntu1_all.deb) ... Unpacking replacement python-minimal ... Setting up python-minimal (2.6.1-0ubuntu1) ... (Reading database ... 9227 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61ubuntu3 (using .../sysvinit-utils_2.86.ds1-61ubuntu5_armel.deb) ... Unpacking replacement sysvinit-utils ... Setting up sysvinit-utils (2.86.ds1-61ubuntu5) ... (Reading database ... 9227 files and directories currently installed.) Preparing to replace debconf-english 1.5.24ubuntu3 (using .../debconf-english_1.5.24ubuntu4_all.deb) ... Unpacking replacement debconf-english ... Setting up debconf-english (1.5.24ubuntu4) ... (Reading database ... 9227 files and directories currently installed.) Preparing to replace debconf 1.5.24ubuntu3 (using .../debconf_1.5.24ubuntu4_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.24ubuntu4) ... (Reading database ... 9229 files and directories currently installed.) Preparing to replace libvolume-id1 138-1 (using .../libvolume-id1_139-1_armel.deb) ... Unpacking replacement libvolume-id1 ... Setting up libvolume-id1 (139-1) ... Selecting previously deselected package libmagic1. (Reading database ... 9229 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_4.26-2ubuntu1_armel.deb) ... Selecting previously deselected package file. Unpacking file (from .../file_4.26-2ubuntu1_armel.deb) ... Selecting previously deselected package libgpm2. Unpacking libgpm2 (from .../libgpm2_1.20.4-3.1ubuntu1_armel.deb) ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20090207-1ubuntu1_armel.deb) ... Selecting previously deselected package readline-common. Unpacking readline-common (from .../readline-common_5.2-3.1_all.deb) ... Selecting previously deselected package libreadline5. Unpacking libreadline5 (from .../libreadline5_5.2-3.1_armel.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.6.10-1_armel.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-15ubuntu1_armel.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.44-1_all.deb) ... Preparing to replace initscripts 2.86.ds1-61ubuntu3 (using .../initscripts_2.86.ds1-61ubuntu5_armel.deb) ... Unpacking replacement initscripts ... Preparing to replace libgmp3c2 2:4.2.2+dfsg-3ubuntu1 (using .../libgmp3c2_2%3a4.2.4+dfsg-2ubuntu1_armel.deb) ... Unpacking replacement libgmp3c2 ... Selecting previously deselected package python2.6. Unpacking python2.6 (from .../python2.6_2.6.1-0ubuntu9_armel.deb) ... Setting up linux-libc-dev (2.6.28-8.26) ... Setting up libc6-dev (2.9-0ubuntu12) ... Setting up libmagic1 (4.26-2ubuntu1) ... Setting up file (4.26-2ubuntu1) ... Setting up libgpm2 (1.20.4-3.1ubuntu1) ... Setting up libncursesw5 (5.7+20090207-1ubuntu1) ... Setting up readline-common (5.2-3.1) ... Setting up libreadline5 (5.2-3.1) ... Setting up libsqlite3-0 (3.6.10-1) ... Setting up libssl0.9.8 (0.9.8g-15ubuntu1) ... Setting up mime-support (3.44-1) ... Setting up initscripts (2.86.ds1-61ubuntu5) ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Setting up libgmp3c2 (2:4.2.4+dfsg-2ubuntu1) ... Setting up python2.6 (2.6.1-0ubuntu9) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '885415-2029188', '--nolog', '--batch', '--archive=ubuntu', '--purpose=PRIMARY', '--dist=jaunty', '--comp=main', 'xserver-xorg-video-ark_0.7.1-1.dsc'] Initiating build Automatic build of xserver-xorg-video-ark_0.7.1-1 on nageia by sbuild/armel 1.170.5 Build started at 20090227-2001 ****************************************************************************** xserver-xorg-video-ark_0.7.1-1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 5), pkg-config, quilt, xserver-xorg-dev (>= 2:1.5.99.901), x11proto-core-dev, x11proto-fonts-dev, x11proto-randr-dev, x11proto-render-dev, x11proto-xext-dev, dpkg-dev (>= 1.14.17), automake, libtool, xutils-dev Checking for already installed source dependencies... debhelper: missing pkg-config: missing quilt: missing xserver-xorg-dev: missing x11proto-core-dev: missing x11proto-fonts-dev: missing x11proto-randr-dev: missing x11proto-render-dev: missing x11proto-xext-dev: missing dpkg-dev: already installed (1.14.24ubuntu1 >= 1.14.17 is satisfied) automake: missing libtool: missing xutils-dev: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper pkg-config quilt xserver-xorg-dev x11proto-core-dev x11proto-fonts-dev x11proto-randr-dev x11proto-render-dev x11proto-xext-dev automake libtool xutils-dev Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf autotools-dev bsdmainutils ca-certificates curl diffstat gettext gettext-base groff-base html2text intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libcroco3 libcurl3 libgcrypt11 libglib2.0-0 libglib2.0-data libgnutls26 libgpg-error0 libidn11 libio-compress-base-perl libio-compress-zlib-perl libkeyutils1 libkrb53 libldap-2.4-2 libltdl7 libltdl7-dev libmail-sendmail-perl libpciaccess-dev libpciaccess0 libpixman-1-0 libpixman-1-dev libsasl2-2 libsasl2-modules libsys-hostname-long-perl libtasn1-3 libxau-dev libxau6 libxml2 m4 man-db openssl po-debconf sgml-base x11-common x11proto-dri2-dev x11proto-input-dev x11proto-video-dev xml-core Suggested packages: autoconf2.13 autobook autoconf-archive gnu-standards autoconf-doc wamerican wordlist whois vacation dh-make cvs gettext-doc groff rng-tools gnutls-bin krb5-doc krb5-user libtool-doc pciutils libsasl2-modules-otp libsasl2-modules-ldap libsasl2-modules-sql libsasl2-modules-gssapi-mit libsasl2-modules-gssapi-heimdal automaken gfortran fortran95-compiler gcj less www-browser openssl-doc libmail-box-perl procmail graphviz sgml-base-doc The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils ca-certificates curl debhelper diffstat gettext gettext-base groff-base html2text intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libcroco3 libcurl3 libgcrypt11 libglib2.0-0 libglib2.0-data libgnutls26 libgpg-error0 libidn11 libio-compress-base-perl libio-compress-zlib-perl libkeyutils1 libkrb53 libldap-2.4-2 libltdl7 libltdl7-dev libmail-sendmail-perl libpciaccess-dev libpciaccess0 libpixman-1-0 libpixman-1-dev libsasl2-2 libsasl2-modules libsys-hostname-long-perl libtasn1-3 libtool libxau-dev libxau6 libxml2 m4 man-db openssl pkg-config po-debconf quilt sgml-base x11-common x11proto-core-dev x11proto-dri2-dev x11proto-fonts-dev x11proto-input-dev x11proto-randr-dev x11proto-render-dev x11proto-video-dev x11proto-xext-dev xml-core xserver-xorg-dev xutils-dev 0 upgraded, 62 newly installed, 0 to remove and 0 not upgraded. Need to get 1040kB/14.3MB of archives. After this operation, 47.9MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! x11-common libxau6 x11proto-core-dev libxau-dev x11proto-dri2-dev x11proto-fonts-dev x11proto-input-dev x11proto-randr-dev x11proto-render-dev x11proto-video-dev x11proto-xext-dev xutils-dev openssl ca-certificates libgpg-error0 libgcrypt11 libtasn1-3 libgnutls26 libidn11 libkeyutils1 libkrb53 libsasl2-modules libsasl2-2 libldap-2.4-2 bsdmainutils gettext-base groff-base libcompress-raw-zlib-perl libio-compress-base-perl libio-compress-zlib-perl libcompress-zlib-perl libxml2 man-db sgml-base xml-core m4 autoconf autotools-dev automake libcurl3 curl html2text libglib2.0-0 libcroco3 gettext intltool-debian po-debconf debhelper diffstat libglib2.0-data libltdl7 libltdl7-dev libsys-hostname-long-perl libmail-sendmail-perl libpixman-1-0 libpixman-1-dev libtool pkg-config quilt libpciaccess0 libpciaccess-dev xserver-xorg-dev Authentication warning overridden. Get:1 http://ftpmaster.internal jaunty/main x11proto-dri2-dev 1.99.3-1 [8508B] Get:2 http://ftpmaster.internal jaunty/main x11proto-fonts-dev 2.0.2-6ubuntu1 [12.5kB] Get:3 http://ftpmaster.internal jaunty/main x11proto-video-dev 2.2.2-5ubuntu1 [10.2kB] Get:4 http://ftpmaster.internal jaunty/main libpciaccess-dev 0.10.5-1 [24.7kB] Get:5 http://ftpmaster.internal jaunty/main xserver-xorg-dev 2:1.5.99.902-0ubuntu7 [984kB] dpkg-preconfigure: unable to re-open stdin: Fetched 1040kB in 2s (406kB/s) Selecting previously deselected package x11-common. (Reading database ... 9986 files and directories currently installed.) Unpacking x11-common (from .../x11-common_1%3a7.4~5ubuntu13_all.deb) ... Selecting previously deselected package libxau6. Unpacking libxau6 (from .../libxau6_1%3a1.0.4-1_armel.deb) ... Setting up x11-common (1:7.4~5ubuntu13) ... Selecting previously deselected package x11proto-core-dev. (Reading database ... 10048 files and directories currently installed.) Unpacking x11proto-core-dev (from .../x11proto-core-dev_7.0.14-1ubuntu2_all.deb) ... Selecting previously deselected package libxau-dev. Unpacking libxau-dev (from .../libxau-dev_1%3a1.0.4-1_armel.deb) ... Selecting previously deselected package x11proto-dri2-dev. Unpacking x11proto-dri2-dev (from .../x11proto-dri2-dev_1.99.3-1_all.deb) ... Selecting previously deselected package x11proto-fonts-dev. Unpacking x11proto-fonts-dev (from .../x11proto-fonts-dev_2.0.2-6ubuntu1_all.deb) ... Selecting previously deselected package x11proto-input-dev. Unpacking x11proto-input-dev (from .../x11proto-input-dev_1.5.0-1ubuntu1_all.deb) ... Selecting previously deselected package x11proto-randr-dev. Unpacking x11proto-randr-dev (from .../x11proto-randr-dev_1.2.99.3-1_all.deb) ... Selecting previously deselected package x11proto-render-dev. Unpacking x11proto-render-dev (from .../x11proto-render-dev_2%3a0.9.3-2_all.deb) ... Selecting previously deselected package x11proto-video-dev. Unpacking x11proto-video-dev (from .../x11proto-video-dev_2.2.2-5ubuntu1_all.deb) ... Selecting previously deselected package x11proto-xext-dev. Unpacking x11proto-xext-dev (from .../x11proto-xext-dev_7.0.4-1_all.deb) ... Selecting previously deselected package xutils-dev. Unpacking xutils-dev (from .../xutils-dev_1%3a7.4+4_armel.deb) ... Selecting previously deselected package openssl. Unpacking openssl (from .../openssl_0.9.8g-15ubuntu1_armel.deb) ... Selecting previously deselected package ca-certificates. Unpacking ca-certificates (from .../ca-certificates_20080809_all.deb) ... Selecting previously deselected package libgpg-error0. Unpacking libgpg-error0 (from .../libgpg-error0_1.4-2ubuntu7_armel.deb) ... Selecting previously deselected package libgcrypt11. Unpacking libgcrypt11 (from .../libgcrypt11_1.4.1-2ubuntu1_armel.deb) ... Selecting previously deselected package libtasn1-3. Unpacking libtasn1-3 (from .../libtasn1-3_1.5-1_armel.deb) ... Selecting previously deselected package libgnutls26. Unpacking libgnutls26 (from .../libgnutls26_2.4.2-6_armel.deb) ... Selecting previously deselected package libidn11. Unpacking libidn11 (from .../libidn11_1.10-3_armel.deb) ... Selecting previously deselected package libkeyutils1. Unpacking libkeyutils1 (from .../libkeyutils1_1.2-9_armel.deb) ... Selecting previously deselected package libkrb53. Unpacking libkrb53 (from .../libkrb53_1.6.dfsg.4~beta1-5ubuntu1_armel.deb) ... Selecting previously deselected package libsasl2-modules. Unpacking libsasl2-modules (from .../libsasl2-modules_2.1.22.dfsg1-23ubuntu2_armel.deb) ... Selecting previously deselected package libsasl2-2. Unpacking libsasl2-2 (from .../libsasl2-2_2.1.22.dfsg1-23ubuntu2_armel.deb) ... Selecting previously deselected package libldap-2.4-2. Unpacking libldap-2.4-2 (from .../libldap-2.4-2_2.4.14-0ubuntu1_armel.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_6.1.10ubuntu3_armel.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-6ubuntu1_armel.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.18.1.1-21_armel.deb) ... Selecting previously deselected package libcompress-raw-zlib-perl. Unpacking libcompress-raw-zlib-perl (from .../libcompress-raw-zlib-perl_2.015-1_armel.deb) ... Selecting previously deselected package libio-compress-base-perl. Unpacking libio-compress-base-perl (from .../libio-compress-base-perl_2.015-1_all.deb) ... Selecting previously deselected package libio-compress-zlib-perl. Unpacking libio-compress-zlib-perl (from .../libio-compress-zlib-perl_2.015-1_all.deb) ... Selecting previously deselected package libcompress-zlib-perl. Unpacking libcompress-zlib-perl (from .../libcompress-zlib-perl_2.015-1_all.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.6.32.dfsg-5ubuntu3_armel.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.3-3_armel.deb) ... Selecting previously deselected package sgml-base. Unpacking sgml-base (from .../sgml-base_1.26_all.deb) ... Selecting previously deselected package xml-core. Unpacking xml-core (from .../archives/xml-core_0.12_all.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../archives/m4_1.4.11-1_armel.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.63-2ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20080123.2_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.10.2-0ubuntu1_all.deb) ... Selecting previously deselected package libcurl3. Unpacking libcurl3 (from .../libcurl3_7.18.2-8ubuntu1_armel.deb) ... Selecting previously deselected package curl. Unpacking curl (from .../curl_7.18.2-8ubuntu1_armel.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-5_armel.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.19.8-0ubuntu1_armel.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.1-2_armel.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-6ubuntu1_armel.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.15ubuntu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.0.17ubuntu2_all.deb) ... Selecting previously deselected package diffstat. Unpacking diffstat (from .../diffstat_1.46-1_armel.deb) ... Selecting previously deselected package libglib2.0-data. Unpacking libglib2.0-data (from .../libglib2.0-data_2.19.8-0ubuntu1_all.deb) ... Selecting previously deselected package libltdl7. Unpacking libltdl7 (from .../libltdl7_2.2.6a-1ubuntu1_armel.deb) ... Selecting previously deselected package libltdl7-dev. Unpacking libltdl7-dev (from .../libltdl7-dev_2.2.6a-1ubuntu1_armel.deb) ... Selecting previously deselected package libsys-hostname-long-perl. Unpacking libsys-hostname-long-perl (from .../libsys-hostname-long-perl_1.4-2_all.deb) ... Selecting previously deselected package libmail-sendmail-perl. Unpacking libmail-sendmail-perl (from .../libmail-sendmail-perl_0.79.16-1_all.deb) ... Selecting previously deselected package libpixman-1-0. Unpacking libpixman-1-0 (from .../libpixman-1-0_0.13.2-1_armel.deb) ... Selecting previously deselected package libpixman-1-dev. Unpacking libpixman-1-dev (from .../libpixman-1-dev_0.13.2-1_armel.deb) ... Selecting previously deselected package libtool. Unpacking libtool (from .../libtool_2.2.6a-1ubuntu1_armel.deb) ... Selecting previously deselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.22-1_armel.deb) ... Selecting previously deselected package quilt. Unpacking quilt (from .../archives/quilt_0.46-6_all.deb) ... Selecting previously deselected package libpciaccess0. Unpacking libpciaccess0 (from .../libpciaccess0_0.10.5-1_armel.deb) ... Selecting previously deselected package libpciaccess-dev. Unpacking libpciaccess-dev (from .../libpciaccess-dev_0.10.5-1_armel.deb) ... Selecting previously deselected package xserver-xorg-dev. Unpacking xserver-xorg-dev (from .../xserver-xorg-dev_2%3a1.5.99.902-0ubuntu7_armel.deb) ... Setting up libxau6 (1:1.0.4-1) ... Setting up x11proto-core-dev (7.0.14-1ubuntu2) ... Setting up libxau-dev (1:1.0.4-1) ... Setting up x11proto-dri2-dev (1.99.3-1) ... Setting up x11proto-fonts-dev (2.0.2-6ubuntu1) ... Setting up x11proto-input-dev (1.5.0-1ubuntu1) ... Setting up x11proto-randr-dev (1.2.99.3-1) ... Setting up x11proto-render-dev (2:0.9.3-2) ... Setting up x11proto-video-dev (2.2.2-5ubuntu1) ... Setting up x11proto-xext-dev (7.0.4-1) ... Setting up xutils-dev (1:7.4+4) ... Setting up openssl (0.9.8g-15ubuntu1) ... Setting up ca-certificates (20080809) ... Updating certificates in /etc/ssl/certs....done. Running hooks in /etc/ca-certificates/update.d....done. Setting up libgpg-error0 (1.4-2ubuntu7) ... Setting up libgcrypt11 (1.4.1-2ubuntu1) ... Setting up libtasn1-3 (1.5-1) ... Setting up libgnutls26 (2.4.2-6) ... Setting up libidn11 (1.10-3) ... Setting up libkeyutils1 (1.2-9) ... Setting up libkrb53 (1.6.dfsg.4~beta1-5ubuntu1) ... Setting up bsdmainutils (6.1.10ubuntu3) ... Setting up gettext-base (0.17-6ubuntu1) ... Setting up groff-base (1.18.1.1-21) ... Setting up libcompress-raw-zlib-perl (2.015-1) ... Setting up libio-compress-base-perl (2.015-1) ... Setting up libio-compress-zlib-perl (2.015-1) ... Setting up libcompress-zlib-perl (2.015-1) ... Setting up libxml2 (2.6.32.dfsg-5ubuntu3) ... Setting up man-db (2.5.3-3) ... Building database of manual pages ... ... skipping, since this is a buildd Setting up sgml-base (1.26) ... Setting up xml-core (0.12) ... Setting up m4 (1.4.11-1) ... Setting up autoconf (2.63-2ubuntu1) ... Setting up autotools-dev (20080123.2) ... Setting up automake (1:1.10.2-0ubuntu1) ... Setting up html2text (1.3.2a-5) ... Setting up libglib2.0-0 (2.19.8-0ubuntu1) ... Setting up libcroco3 (0.6.1-2) ... Setting up gettext (0.17-6ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.15ubuntu1) ... Setting up debhelper (7.0.17ubuntu2) ... Setting up diffstat (1.46-1) ... Setting up libglib2.0-data (2.19.8-0ubuntu1) ... Setting up libltdl7 (2.2.6a-1ubuntu1) ... Setting up libltdl7-dev (2.2.6a-1ubuntu1) ... Setting up libsys-hostname-long-perl (1.4-2) ... Setting up libmail-sendmail-perl (0.79.16-1) ... Setting up libpixman-1-0 (0.13.2-1) ... Setting up libpixman-1-dev (0.13.2-1) ... Setting up libtool (2.2.6a-1ubuntu1) ... Setting up pkg-config (0.22-1) ... Setting up quilt (0.46-6) ... Setting up libpciaccess0 (0.10.5-1) ... Setting up libpciaccess-dev (0.10.5-1) ... Setting up xserver-xorg-dev (2:1.5.99.902-0ubuntu7) ... Setting up libsasl2-modules (2.1.22.dfsg1-23ubuntu2) ... Setting up libsasl2-2 (2.1.22.dfsg1-23ubuntu2) ... Setting up libldap-2.4-2 (2.4.14-0ubuntu1) ... Setting up libcurl3 (7.18.2-8ubuntu1) ... Setting up curl (7.18.2-8ubuntu1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.9-0ubuntu12 make_3.81-5 dpkg-dev_1.14.24ubuntu1 g++-4.3_4.3.3-3ubuntu5 gcc-4.3_4.3.3-3ubuntu5 binutils_2.19.1-0ubuntu3 libstdc++6_4.3.3-3ubuntu5 libstdc++6-4.3-dev_4.3.3-3ubuntu5 ------------------------------------------------------------------------------ sh: gcc: command not found dpkg-source: warning: Couldn't determine gcc system type, falling back to default (native compilation) gpg: Signature made Sun Jan 25 19:14:37 2009 GMT using DSA key ID AC5F700C gpg: Can't check signature: public key not found dpkg-source: extracting xserver-xorg-video-ark in xserver-xorg-video-ark-0.7.1 dpkg-source: info: unpacking xserver-xorg-video-ark_0.7.1.orig.tar.gz dpkg-source: info: applying xserver-xorg-video-ark_0.7.1-1.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package xserver-xorg-video-ark dpkg-buildpackage: source version 1:0.7.1-1 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean rm -f stampdir/genscripts rm -f debian/*.config \ debian/*.postinst \ debian/*.postrm \ debian/*.preinst \ debian/*.prerm mkdir stampdir >stampdir/stampdir mkdir -p stampdir/log rm -f stampdir/patch Unapplying patches...nothing to do. dh_testdir rm -rf .pc rm -rf stampdir rm -rf imports dh_clean debian/shlibs.local \ debian/po/pothead dh_testdir dh_testroot rm -f build-stamp rm -f config.cache config.log config.status rm -f */config.cache */config.log */config.status rm -f conftest* */conftest* rm -rf autom4te.cache */autom4te.cache rm -rf obj-* rm -f aclocal.m4 config.guess config.sub config.h.in configure rm -f depcomp install-sh ltmain.sh missing mkinstalldirs rm -f $(find -name Makefile.in) dh_clean debian/rules build mkdir stampdir >stampdir/stampdir mkdir -p stampdir/log for FILE in debian/*.config.in \ debian/*.postinst.in \ debian/*.postrm.in \ debian/*.preinst.in \ debian/*.prerm.in; do \ if [ -e "$FILE" ]; then \ MAINTSCRIPT=$(echo $FILE | sed 's/.in$//'); \ sed -n '1,/^#INCLUDE_SHELL_LIB#$/p' <$FILE \ | sed -e '/^#INCLUDE_SHELL_LIB#$/d' >$MAINTSCRIPT.tmp; \ cat debian/xsfbs/xsfbs.sh >>$MAINTSCRIPT.tmp; \ sed -n '/^#INCLUDE_SHELL_LIB#$/,$p' <$FILE \ | sed -e '/^#INCLUDE_SHELL_LIB#$/d' >>$MAINTSCRIPT.tmp; \ sed -e 's/@SOURCE_VERSION@/1:0.7.1-1/' \ -e 's/@OFFICIAL_BUILD@/yes/' \ -e 's/@DEFAULT_DCRESOLUTIONS@//' \ <$MAINTSCRIPT.tmp >$MAINTSCRIPT; \ rm $MAINTSCRIPT.tmp; \ fi; \ done # Validate syntax of generated shell scripts. #sh debian/scripts/validate-posix-sh debian/*.config \ # debian/*.postinst \ # debian/*.postrm \ # debian/*.preinst \ # debian/*.prerm >stampdir/genscripts >stampdir/prepare if ! [ `which quilt` ]; then \ echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \ exit 1; \ fi; \ if QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null next >/dev/null 2>&1; then \ echo -n "Applying patches..."; \ if QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a -v >stampdir/log/patch 2>&1; then \ cat stampdir/log/patch; \ echo "successful."; \ else \ cat stampdir/log/patch; \ echo "failed! (check stampdir/log/patch for details)"; \ exit 1; \ fi; \ else \ echo "No patches to apply"; \ fi; \ >stampdir/patch Applying patches...Applying patch 01_gen_pci_ids.diff patching file src/ark.ids patching file src/Makefile.am Now at patch 01_gen_pci_ids.diff successful. dh_testdir autoreconf -vfi autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force autoreconf: configure.ac: tracing autoreconf: running: libtoolize --install --copy --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. libtoolize: copying file `./config.guess' libtoolize: copying file `./config.sub' libtoolize: copying file `./install-sh' libtoolize: copying file `./ltmain.sh' libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. autoreconf: running: /usr/bin/autoconf --force autoreconf: running: /usr/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.ac:33: installing `./missing' src/Makefile.am: installing `./depcomp' autoreconf: Leaving directory `.' dh_testdir mkdir -p obj-arm-linux-gnueabi cd obj-arm-linux-gnueabi && \ ../configure --prefix=/usr --mandir=\${prefix}/share/man \ --infodir=\${prefix}/share/info --build=arm-linux-gnueabi --disable-static \ CFLAGS="-Wall -g -O2" checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... arm-unknown-linux-gnueabi checking host system type... arm-unknown-linux-gnueabi checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 805306365 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking if RANDR is defined... yes checking if RENDER is defined... yes checking if DPMSExtension is defined... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for XORG... yes checking whether XSERVER_LIBPCIACCESS is declared... yes checking for ANSI C header files... (cached) yes checking for PCIACCESS... yes configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands cd obj-arm-linux-gnueabi && /usr/bin/make make[1]: Entering directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' /usr/bin/make all-recursive make[2]: Entering directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' Making all in src make[3]: Entering directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi/src' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -I/usr/include/xorg -I../../src -I/usr/include -Wall -g -O2 -I/usr/include/xorg -I/usr/include/pixman-1 -I../../src -MT ark_accel.lo -MD -MP -MF .deps/ark_accel.Tpo -c -o ark_accel.lo ../../src/ark_accel.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -I/usr/include/xorg -I../../src -I/usr/include -Wall -g -O2 -I/usr/include/xorg -I/usr/include/pixman-1 -I../../src -MT ark_accel.lo -MD -MP -MF .deps/ark_accel.Tpo -c ../../src/ark_accel.c -fPIC -DPIC -o .libs/ark_accel.o mv -f .deps/ark_accel.Tpo .deps/ark_accel.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -I/usr/include/xorg -I../../src -I/usr/include -Wall -g -O2 -I/usr/include/xorg -I/usr/include/pixman-1 -I../../src -MT ark_driver.lo -MD -MP -MF .deps/ark_driver.Tpo -c -o ark_driver.lo ../../src/ark_driver.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -I/usr/include/xorg -I../../src -I/usr/include -Wall -g -O2 -I/usr/include/xorg -I/usr/include/pixman-1 -I../../src -MT ark_driver.lo -MD -MP -MF .deps/ark_driver.Tpo -c ../../src/ark_driver.c -fPIC -DPIC -o .libs/ark_driver.o mv -f .deps/ark_driver.Tpo .deps/ark_driver.Plo /bin/bash ../libtool --tag=CC --mode=link gcc -Wall -g -O2 -I/usr/include/xorg -I/usr/include/pixman-1 -I../../src -module -avoid-version -Wl,-Bsymbolic-functions -o ark_drv.la -rpath /usr/lib/xorg/modules/drivers ark_accel.lo ark_driver.lo libtool: link: gcc -shared .libs/ark_accel.o .libs/ark_driver.o -Wl,-Bsymbolic-functions -Wl,-soname -Wl,ark_drv.so -o .libs/ark_drv.so libtool: link: ( cd ".libs" && rm -f "ark_drv.la" && ln -s "../ark_drv.la" "ark_drv.la" ) make[3]: Leaving directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi/src' make[3]: Entering directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' make[2]: Leaving directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' make[1]: Leaving directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' >build-stamp /usr/bin/fakeroot debian/rules binary-arch dh_testdir dh_testroot dh_clean -k dh_installdirs cd obj-arm-linux-gnueabi && /usr/bin/make DESTDIR=/build/buildd/xserver-xorg-video-ark-0.7.1/debian/tmp install make[1]: Entering directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' Making install in src make[2]: Entering directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi/src' make[3]: Entering directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi/src' make[3]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/xorg/modules/drivers" || /bin/mkdir -p "/build/buildd/xserver-xorg-video-ark-0.7.1/debian/tmp/usr/lib/xorg/modules/drivers" /bin/bash ../libtool --mode=install /usr/bin/install -c 'ark_drv.la' '/build/buildd/xserver-xorg-video-ark-0.7.1/debian/tmp/usr/lib/xorg/modules/drivers/ark_drv.la' libtool: install: /usr/bin/install -c .libs/ark_drv.so /build/buildd/xserver-xorg-video-ark-0.7.1/debian/tmp/usr/lib/xorg/modules/drivers/ark_drv.so libtool: install: /usr/bin/install -c .libs/ark_drv.lai /build/buildd/xserver-xorg-video-ark-0.7.1/debian/tmp/usr/lib/xorg/modules/drivers/ark_drv.la libtool: install: warning: remember to run `libtool --finish /usr/lib/xorg/modules/drivers' test -z "/usr/share/xserver-xorg/pci" || /bin/mkdir -p "/build/buildd/xserver-xorg-video-ark-0.7.1/debian/tmp/usr/share/xserver-xorg/pci" /usr/bin/install -c -m 644 '../../src/ark.ids' '/build/buildd/xserver-xorg-video-ark-0.7.1/debian/tmp/usr/share/xserver-xorg/pci/ark.ids' make[3]: Leaving directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi/src' make[2]: Leaving directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi/src' make[2]: Entering directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' make[3]: Entering directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' make[2]: Leaving directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' make[1]: Leaving directory `/build/buildd/xserver-xorg-video-ark-0.7.1/obj-arm-linux-gnueabi' echo "xserver:Depends=xserver-xorg-core (>= 2:1.5.99.901)" >> debian/xserver-xorg-video-ark.substvars echo "xviddriver:Provides=xserver-xorg-video-5" >> debian/xserver-xorg-video-ark.substvars echo "xinpdriver:Provides=xserver-xorg-input-4" >> debian/xserver-xorg-video-ark.substvars dh_testdir dh_testroot dh_installdocs dh_installchangelogs ChangeLog dh_install --sourcedir=debian/tmp --list-missing --exclude=ark_drv.la dh_link dh_strip dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: xserver-xorg-video-ark dh_strip debug symbol extraction: packages to act on: xserver-xorg-video-ark dh_strip debug symbol extraction: ignored packages: pkgstriptranslations: processing control file: ./debian/xserver-xorg-video-ark-dbgsym/DEBIAN/control, package xserver-xorg-video-ark-dbgsym, directory ./debian/xserver-xorg-video-ark-dbgsym pkgstriptranslations: xserver-xorg-video-ark-dbgsym does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Core Developers " warning, `/build/buildd/xserver-xorg-video-ark-0.7.1/debian/xserver-xorg-video-ark-dbgsym/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `xserver-xorg-video-ark-dbgsym' in `../xserver-xorg-video-ark-dbgsym_0.7.1-1_armel.ddeb'. dh_compress dh_fixperms dh_installdeb dh_shlibdeps -- --warnings=6 dh_gencontrol dpkg-gencontrol: warning: unknown substitution variable ${misc:Depends} dh_md5sums dh_builddeb pkgstriptranslations: processing control file: ./debian/xserver-xorg-video-ark/DEBIAN/control, package xserver-xorg-video-ark, directory ./debian/xserver-xorg-video-ark pkgstriptranslations: xserver-xorg-video-ark does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Core Developers " warning, `debian/xserver-xorg-video-ark/DEBIAN/control' contains user-defined field `Original-Maintainer' dpkg-deb: ignoring 1 warnings about the control file(s) dpkg-deb: building package `xserver-xorg-video-ark' in `../xserver-xorg-video-ark_0.7.1-1_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../xserver-xorg-video-ark_0.7.1-1_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20090227-2003 Publishing debug debs. chroot-autobuild/build/buildd/xserver-xorg-video-ark_0.7.1-1_armel.deb: new debian package, version 2.0. size 18036 bytes: control archive= 825 bytes. 812 bytes, 22 lines control 399 bytes, 5 lines md5sums Package: xserver-xorg-video-ark Version: 1:0.7.1-1 Architecture: armel Maintainer: Ubuntu Core Developers Original-Maintainer: Debian X Strike Force Installed-Size: 96 Depends: libc6 (>= 2.4), xserver-xorg-core (>= 2:1.5.99.901) Conflicts: xserver-xorg-driver-ark Replaces: xserver-xorg (<< 6.8.2-35), xserver-xorg-driver-ark Provides: xserver-xorg-video-5 Section: x11 Priority: optional Description: X.Org X server -- ark display driver This package provides the driver for the ark family of chipsets. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-ark driver module. chroot-autobuild/build/buildd/xserver-xorg-video-ark_0.7.1-1_armel.deb: drwxr-xr-x root/root 0 2009-02-27 20:03 ./ drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/ drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/share/ drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/share/xserver-xorg/ drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/share/xserver-xorg/pci/ -rw-r--r-- root/root 27 2009-02-27 20:03 ./usr/share/xserver-xorg/pci/ark.ids drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/share/doc/ drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/share/doc/xserver-xorg-video-ark/ -rw-r--r-- root/root 1235 2009-02-27 20:01 ./usr/share/doc/xserver-xorg-video-ark/copyright -rw-r--r-- root/root 3531 2009-02-27 20:01 ./usr/share/doc/xserver-xorg-video-ark/changelog.gz -rw-r--r-- root/root 1918 2009-02-27 20:01 ./usr/share/doc/xserver-xorg-video-ark/changelog.Debian.gz drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/share/bug/ drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/share/bug/xserver-xorg-video-ark/ drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/lib/ drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/lib/xorg/ drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/lib/xorg/modules/ drwxr-xr-x root/root 0 2009-02-27 20:03 ./usr/lib/xorg/modules/drivers/ -rw-r--r-- root/root 22352 2009-02-27 20:03 ./usr/lib/xorg/modules/drivers/ark_drv.so lrwxrwxrwx root/root 0 2009-02-27 20:03 ./usr/share/bug/xserver-xorg-video-ark/script -> ../xserver-xorg-core/script xserver-xorg-video-ark_0.7.1-1_armel.changes: Format: 1.8 Date: Sun, 25 Jan 2009 20:12:46 +0100 Source: xserver-xorg-video-ark Binary: xserver-xorg-video-ark Architecture: armel Version: 1:0.7.1-1 Distribution: jaunty Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: Julien Cristau Description: xserver-xorg-video-ark - X.Org X server -- ark display driver Changes: xserver-xorg-video-ark (1:0.7.1-1) experimental; urgency=low . * New upstream release. * Run autoreconf on build. Build-depend on automake, libtool and xutils-dev. * Handle parallel builds. * Build against xserver 1.6 rc1. Checksums-Sha1: e2cbb203f85034572a0edef25de04258c62dbacb 18036 xserver-xorg-video-ark_0.7.1-1_armel.deb Checksums-Sha256: a8439084550ce788cfd75cc08f07e62bc5e8f86a08d597969b28cdd8447245c5 18036 xserver-xorg-video-ark_0.7.1-1_armel.deb Files: 345e215cd78813c8d3bc115d57ba65d9 18036 x11 optional xserver-xorg-video-ark_0.7.1-1_armel.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/xserver-xorg-video-ark-0.7.1 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --root=/home/buildd/build-885415-2029188/chroot-autobuild --purge groff-base x11proto-randr-dev libglib2.0-0 m4 x11proto-core-dev libsasl2-2 libio-compress-base-perl gettext libglib2.0-data x11proto-fonts-dev libtasn1-3 x11proto-dri2-dev openssl libpciaccess0 curl x11-common libltdl7-dev autotools-dev po-debconf quilt libcroco3 libcompress-raw-zlib-perl xserver-xorg-dev libxml2 x11proto-xext-dev libsys-hostname-long-perl libmail-sendmail-perl pkg-config automake man-db libtool intltool-debian libpixman-1-0 x11proto-input-dev libcompress-zlib-perl libcurl3 libldap-2.4-2 xml-core libxau-dev libgpg-error0 diffstat ca-certificates html2text libgcrypt11 libpixman-1-dev gettext-base debhelper libidn11 libkeyutils1 sgml-base xutils-dev libgnutls26 libpciaccess-dev x11proto-render-dev x11proto-video-dev libsasl2-modules libio-compress-zlib-perl libltdl7 bsdmainutils libxau6 autoconf libkrb53 (Reading database ... 12596 files and directories currently installed.) Removing libglib2.0-data ... Removing curl ... Removing libltdl7-dev ... Removing quilt ... Purging configuration files for quilt ... Removing xserver-xorg-dev ... Removing x11proto-xext-dev ... Removing libmail-sendmail-perl ... Removing pkg-config ... Removing automake ... Removing libtool ... Removing x11proto-input-dev ... Removing libcompress-zlib-perl ... Removing libcurl3 ... Purging configuration files for libcurl3 ... Removing libldap-2.4-2 ... Purging configuration files for libldap-2.4-2 ... Removing xml-core ... Purging configuration files for xml-core ... dpkg - warning: while removing xml-core, directory `/etc/sgml' not empty so not removed. Removing libxau-dev ... Removing diffstat ... Removing ca-certificates ... Removing hash symlinks in /etc/ssl/certs ...done. Purging configuration files for ca-certificates ... Removing libpixman-1-dev ... Removing debhelper ... Removing libidn11 ... Purging configuration files for libidn11 ... Removing sgml-base ... Purging configuration files for sgml-base ... Removing xutils-dev ... Removing libgnutls26 ... Purging configuration files for libgnutls26 ... Removing libpciaccess-dev ... Removing x11proto-render-dev ... Removing x11proto-video-dev ... Removing libio-compress-zlib-perl ... Removing libltdl7 ... Purging configuration files for libltdl7 ... Removing libxau6 ... Purging configuration files for libxau6 ... Removing autoconf ... Purging configuration files for autoconf ... Removing libkrb53 ... Purging configuration files for libkrb53 ... Removing x11proto-randr-dev ... Removing m4 ... Removing libio-compress-base-perl ... Removing x11proto-fonts-dev ... Removing libtasn1-3 ... Purging configuration files for libtasn1-3 ... Removing x11proto-dri2-dev ... Removing openssl ... Purging configuration files for openssl ... Removing libpciaccess0 ... Purging configuration files for libpciaccess0 ... Removing autotools-dev ... Removing po-debconf ... Removing libcompress-raw-zlib-perl ... Removing libsys-hostname-long-perl ... Removing man-db ... Purging configuration files for man-db ... Removing intltool-debian ... Removing libpixman-1-0 ... Purging configuration files for libpixman-1-0 ... Removing html2text ... Purging configuration files for html2text ... Removing libgcrypt11 ... Purging configuration files for libgcrypt11 ... Removing libkeyutils1 ... Purging configuration files for libkeyutils1 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing groff-base ... Purging configuration files for groff-base ... Removing x11proto-core-dev ... Removing gettext ... Removing x11-common ... Purging configuration files for x11-common ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libgpg-error0 ... Purging configuration files for libgpg-error0 ... Removing gettext-base ... Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing libsasl2-2 ... Purging configuration files for libsasl2-2 ... Removing libsasl2-modules ... Processing triggers for libc6 ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20090227-2004 Build needed 00:02:02, 2532k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '885415-2029188'] Scanning for processes to kill in build 885415-2029188... Scanning for processes to kill in build /home/buildd/build-885415-2029188/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '885415-2029188'] Unmounting chroot for build 885415-2029188... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '885415-2029188'] Removing build 885415-2029188