RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '1430362-2947844', '/home/buildd/filecache-default/0cc6133ec0641a093ff31329e4e8a75ed5be1fc3'] Synching the system clock with the buildd NTP service... 5 Jan 12:47:31 ntpdate[27184]: adjust time server 10.211.37.1 offset 0.000073 sec Unpacking chroot for build 1430362-2947844 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '1430362-2947844'] Mounting chroot for build 1430362-2947844 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '1430362-2947844', 'main'] Attempting OGRE for main in build-1430362-2947844 No OGRE sources.list found. RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '1430362-2947844', 'deb http://ftpmaster.internal/ubuntu lucid main'] Overriding sources.list in build-1430362-2947844 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '1430362-2947844'] Updating debian chroot for build 1430362-2947844 Get:1 http://ftpmaster.internal lucid Release.gpg [189B] Get:2 http://ftpmaster.internal lucid Release [65.9kB] Get:3 http://ftpmaster.internal lucid/main Packages [1365kB] Fetched 1432kB in 4s (299kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libplymouth2 libpng12-0 The following packages will be upgraded: apt apt-transport-https bash binutils bsdutils cpp-4.4 g++-4.4 gcc-4.4 gcc-4.4-base ifupdown libblkid1 libc-bin libc-dev-bin libc6 libc6-dev libgcc1 libgnutls26 libgomp1 libgssapi-krb5-2 libk5crypto3 libkrb5-3 libkrb5support0 libstdc++6 libstdc++6-4.4-dev libudev0 libuuid1 linux-libc-dev lsb-base makedev mount mountall procps sed tzdata util-linux 35 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/25.3MB of archives. After this operation, 745kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! bash mount sed lsb-base tzdata util-linux libc-dev-bin libc6-dev libc-bin libc6 linux-libc-dev libgomp1 cpp-4.4 gcc-4.4-base libgcc1 gcc-4.4 g++-4.4 libstdc++6-4.4-dev libstdc++6 binutils bsdutils libpng12-0 libplymouth2 makedev mountall apt libuuid1 libblkid1 ifupdown libgnutls26 libgssapi-krb5-2 libkrb5-3 libkrb5support0 libk5crypto3 libudev0 procps apt-transport-https debconf: delaying package configuration, since apt-utils is not installed Authentication warning overridden. (Reading database ... 12460 files and directories currently installed.) Preparing to replace bash 4.0-5ubuntu2 (using .../bash_4.1-1ubuntu1_armel.deb) ... Unpacking replacement bash ... Setting up bash (4.1-1ubuntu1) ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. (Reading database ... 12460 files and directories currently installed.) Preparing to replace mount 2.16-1ubuntu5 (using .../mount_2.16-1ubuntu6_armel.deb) ... Unpacking replacement mount ... Setting up mount (2.16-1ubuntu6) ... (Reading database ... 12460 files and directories currently installed.) Preparing to replace sed 4.2.1-4 (using .../archives/sed_4.2.1-6_armel.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-6) ... (Reading database ... 12460 files and directories currently installed.) Preparing to replace lsb-base 4.0-0ubuntu6 (using .../lsb-base_4.0-0ubuntu7_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (4.0-0ubuntu7) ... (Reading database ... 12460 files and directories currently installed.) Preparing to replace tzdata 2009s-0ubuntu1 (using .../tzdata_2009u-1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2009u-1) ... Current default time zone: 'Etc/UTC' Local time is now: Tue Jan 5 12:48:04 UTC 2010. Universal Time is now: Tue Jan 5 12:48:04 UTC 2010. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... 12460 files and directories currently installed.) Preparing to replace util-linux 2.16-1ubuntu5 (using .../util-linux_2.16-1ubuntu6_armel.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Setting up util-linux (2.16-1ubuntu6) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. (Reading database ... 12460 files and directories currently installed.) Preparing to replace libc-dev-bin 2.10.2-2ubuntu3 (using .../libc-dev-bin_2.10.2-3ubuntu1_armel.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6-dev 2.10.2-2ubuntu3 (using .../libc6-dev_2.10.2-3ubuntu1_armel.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-bin 2.10.2-2ubuntu3 (using .../libc-bin_2.10.2-3ubuntu1_armel.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.10.2-3ubuntu1) ... (Reading database ... 12460 files and directories currently installed.) Preparing to replace libc6 2.10.2-2ubuntu3 (using .../libc6_2.10.2-3ubuntu1_armel.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.10.2-3ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12460 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.32-8.12 (using .../linux-libc-dev_2.6.32-9.13_armel.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libgomp1 4.4.2-5ubuntu1 (using .../libgomp1_4.4.2-8ubuntu1_armel.deb) ... Unpacking replacement libgomp1 ... Preparing to replace cpp-4.4 4.4.2-5ubuntu1 (using .../cpp-4.4_4.4.2-8ubuntu1_armel.deb) ... Unpacking replacement cpp-4.4 ... Preparing to replace gcc-4.4-base 4.4.2-5ubuntu1 (using .../gcc-4.4-base_4.4.2-8ubuntu1_armel.deb) ... Unpacking replacement gcc-4.4-base ... Setting up gcc-4.4-base (4.4.2-8ubuntu1) ... (Reading database ... 12460 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.2-5ubuntu1 (using .../libgcc1_1%3a4.4.2-8ubuntu1_armel.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.2-8ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12460 files and directories currently installed.) Preparing to replace gcc-4.4 4.4.2-5ubuntu1 (using .../gcc-4.4_4.4.2-8ubuntu1_armel.deb) ... Unpacking replacement gcc-4.4 ... Preparing to replace g++-4.4 4.4.2-5ubuntu1 (using .../g++-4.4_4.4.2-8ubuntu1_armel.deb) ... Unpacking replacement g++-4.4 ... Preparing to replace libstdc++6-4.4-dev 4.4.2-5ubuntu1 (using .../libstdc++6-4.4-dev_4.4.2-8ubuntu1_armel.deb) ... Unpacking replacement libstdc++6-4.4-dev ... Preparing to replace libstdc++6 4.4.2-5ubuntu1 (using .../libstdc++6_4.4.2-8ubuntu1_armel.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.2-8ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12460 files and directories currently installed.) Preparing to replace binutils 2.20-4ubuntu3 (using .../binutils_2.20-4ubuntu4_armel.deb) ... Unpacking replacement binutils ... Preparing to replace bsdutils 1:2.16-1ubuntu5 (using .../bsdutils_1%3a2.16-1ubuntu6_armel.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.16-1ubuntu6) ... Selecting previously deselected package libpng12-0. (Reading database ... 12460 files and directories currently installed.) Unpacking libpng12-0 (from .../libpng12-0_1.2.41-1_armel.deb) ... Selecting previously deselected package libplymouth2. Unpacking libplymouth2 (from .../libplymouth2_0.8.0~-6_armel.deb) ... Preparing to replace makedev 2.3.1-89 (using .../makedev_2.3.1-89ubuntu1_all.deb) ... Unpacking replacement makedev ... Setting up libpng12-0 (1.2.41-1) ... Setting up libplymouth2 (0.8.0~-6) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12483 files and directories currently installed.) Preparing to replace mountall 1.1 (using .../mountall_2.3_armel.deb) ... Unpacking replacement mountall ... Preparing to replace apt 0.7.24ubuntu1 (using .../apt_0.7.25ubuntu2_armel.deb) ... Unpacking replacement apt ... Setting up apt (0.7.25ubuntu2) ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/cron.daily/apt ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12498 files and directories currently installed.) Preparing to replace libuuid1 2.16-1ubuntu5 (using .../libuuid1_2.16-1ubuntu6_armel.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.16-1ubuntu6) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12498 files and directories currently installed.) Preparing to replace libblkid1 2.16-1ubuntu5 (using .../libblkid1_2.16-1ubuntu6_armel.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.16-1ubuntu6) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12498 files and directories currently installed.) Preparing to replace ifupdown 0.6.8ubuntu23 (using .../ifupdown_0.6.8ubuntu25_armel.deb) ... Unpacking replacement ifupdown ... Preparing to replace libgnutls26 2.8.4-2 (using .../libgnutls26_2.8.5-2_armel.deb) ... Unpacking replacement libgnutls26 ... Preparing to replace libgssapi-krb5-2 1.7+dfsg-3 (using .../libgssapi-krb5-2_1.7+dfsg-4_armel.deb) ... Unpacking replacement libgssapi-krb5-2 ... Preparing to replace libkrb5-3 1.7+dfsg-3 (using .../libkrb5-3_1.7+dfsg-4_armel.deb) ... Unpacking replacement libkrb5-3 ... Preparing to replace libkrb5support0 1.7+dfsg-3 (using .../libkrb5support0_1.7+dfsg-4_armel.deb) ... Unpacking replacement libkrb5support0 ... Preparing to replace libk5crypto3 1.7+dfsg-3 (using .../libk5crypto3_1.7+dfsg-4_armel.deb) ... Unpacking replacement libk5crypto3 ... Preparing to replace libudev0 149-3 (using .../libudev0_149-5_armel.deb) ... Unpacking replacement libudev0 ... Preparing to replace procps 1:3.2.8-1ubuntu3 (using .../procps_1%3a3.2.8-1ubuntu4_armel.deb) ... Unpacking replacement procps ... Preparing to replace apt-transport-https 0.7.24ubuntu1 (using .../apt-transport-https_0.7.25ubuntu2_armel.deb) ... Unpacking replacement apt-transport-https ... Setting up libc-dev-bin (2.10.2-3ubuntu1) ... Setting up linux-libc-dev (2.6.32-9.13) ... Setting up libc6-dev (2.10.2-3ubuntu1) ... Setting up libgomp1 (4.4.2-8ubuntu1) ... Setting up cpp-4.4 (4.4.2-8ubuntu1) ... Setting up binutils (2.20-4ubuntu4) ... Setting up gcc-4.4 (4.4.2-8ubuntu1) ... Setting up makedev (2.3.1-89ubuntu1) ... Setting up ifupdown (0.6.8ubuntu25) ... ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces Setting up libgnutls26 (2.8.5-2) ... Setting up libkrb5support0 (1.7+dfsg-4) ... Setting up libk5crypto3 (1.7+dfsg-4) ... Setting up libkrb5-3 (1.7+dfsg-4) ... Setting up libgssapi-krb5-2 (1.7+dfsg-4) ... Setting up libudev0 (149-5) ... Setting up procps (1:3.2.8-1ubuntu4) ... Installing new version of config file /etc/sysctl.d/README ... Installing new version of config file /etc/sysctl.conf ... Setting up apt-transport-https (0.7.25ubuntu2) ... Setting up mountall (2.3) ... Installing new version of config file /etc/init/mountall-reboot.conf ... Installing new version of config file /etc/init/mountall-shell.conf ... Installing new version of config file /etc/init/mountall.conf ... Setting up g++-4.4 (4.4.2-8ubuntu1) ... Setting up libstdc++6-4.4-dev (4.4.2-8ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '1430362-2947844', '--nolog', '--batch', '--archive=ubuntu', '--purpose=PRIMARY', '--dist=lucid', '--comp=main', 'xserver-xorg-video-nv_2.1.15-1ubuntu2.dsc'] Initiating build 1430362-2947844 with 0 processor cores. Automatic build of xserver-xorg-video-nv_2.1.15-1ubuntu2 on jambul by sbuild/armel 1.170.5 Build started at 20100105-1248 ****************************************************************************** xserver-xorg-video-nv_2.1.15-1ubuntu2.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 5.0.0), pkg-config, xserver-xorg-dev (>= 2:1.7), x11proto-video-dev, x11proto-core-dev, x11proto-fonts-dev, x11proto-randr-dev (>= 1.2), x11proto-render-dev, x11proto-xext-dev, dpkg-dev (>= 1.14.17), automake, libtool, xutils-dev, quilt Checking for already installed source dependencies... debhelper: missing pkg-config: missing xserver-xorg-dev: missing x11proto-video-dev: missing x11proto-core-dev: missing x11proto-fonts-dev: missing x11proto-randr-dev: missing x11proto-render-dev: missing x11proto-xext-dev: missing dpkg-dev: already installed (1.15.4.1ubuntu1 >= 1.14.17 is satisfied) automake: missing libtool: missing xutils-dev: missing quilt: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper pkg-config xserver-xorg-dev x11proto-video-dev x11proto-core-dev x11proto-fonts-dev x11proto-randr-dev x11proto-render-dev x11proto-xext-dev automake libtool xutils-dev quilt Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf autotools-dev bsdmainutils diffstat file gettext gettext-base groff-base html2text intltool-debian libcroco3 libglib2.0-0 libmagic1 libpciaccess-dev libpciaccess0 libpcre3 libpixman-1-0 libpixman-1-dev libpthread-stubs0 libpthread-stubs0-dev libx11-6 libx11-data libx11-dev libxau-dev libxau6 libxcb1 libxcb1-dev libxdmcp-dev libxdmcp6 libxkbfile-dev libxkbfile1 libxml2 m4 man-db po-debconf x11-common x11proto-dri2-dev x11proto-input-dev x11proto-kb-dev xtrans-dev Suggested packages: autoconf2.13 autoconf-archive gnu-standards autoconf-doc wamerican wordlist whois vacation dh-make gettext-doc groff pciutils libtool-doc automaken gfortran fortran95-compiler gcj less www-browser libmail-box-perl procmail graphviz Recommended packages: curl wget lynx cvs libglib2.0-data shared-mime-info libltdl-dev xml-core libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils debhelper diffstat file gettext gettext-base groff-base html2text intltool-debian libcroco3 libglib2.0-0 libmagic1 libpciaccess-dev libpciaccess0 libpcre3 libpixman-1-0 libpixman-1-dev libpthread-stubs0 libpthread-stubs0-dev libtool libx11-6 libx11-data libx11-dev libxau-dev libxau6 libxcb1 libxcb1-dev libxdmcp-dev libxdmcp6 libxkbfile-dev libxkbfile1 libxml2 m4 man-db pkg-config po-debconf quilt x11-common x11proto-core-dev x11proto-dri2-dev x11proto-fonts-dev x11proto-input-dev x11proto-kb-dev x11proto-randr-dev x11proto-render-dev x11proto-video-dev x11proto-xext-dev xserver-xorg-dev xtrans-dev xutils-dev 0 upgraded, 53 newly installed, 0 to remove and 0 not upgraded. Need to get 1781kB/17.4MB of archives. After this operation, 49.8MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! x11-common libxau6 libxdmcp6 libxcb1 libx11-data libx11-6 x11proto-core-dev libxau-dev libxdmcp-dev x11proto-input-dev x11proto-kb-dev xtrans-dev libpthread-stubs0 libpthread-stubs0-dev libxcb1-dev libx11-dev x11proto-dri2-dev libmagic1 file libpcre3 libglib2.0-0 libxml2 bsdmainutils gettext-base groff-base man-db m4 autoconf autotools-dev automake html2text libcroco3 gettext intltool-debian po-debconf debhelper diffstat libpixman-1-0 libpixman-1-dev libtool libxkbfile1 libxkbfile-dev pkg-config quilt x11proto-fonts-dev x11proto-randr-dev x11proto-render-dev x11proto-video-dev x11proto-xext-dev libpciaccess0 libpciaccess-dev xserver-xorg-dev xutils-dev Authentication warning overridden. Get:1 http://ftpmaster.internal lucid/main x11proto-dri2-dev 2.1-1 [10.4kB] Get:2 http://ftpmaster.internal lucid/main libxkbfile1 1:1.0.6-1 [70.0kB] Get:3 http://ftpmaster.internal lucid/main libxkbfile-dev 1:1.0.6-1 [80.5kB] Get:4 http://ftpmaster.internal lucid/main x11proto-fonts-dev 2.1.0-1 [12.2kB] Get:5 http://ftpmaster.internal lucid/main x11proto-video-dev 2.3.0-1 [9878B] Get:6 http://ftpmaster.internal lucid/main libpciaccess0 0.10.9-1 [30.9kB] Get:7 http://ftpmaster.internal lucid/main libpciaccess-dev 0.10.9-1 [34.5kB] Get:8 http://ftpmaster.internal lucid/main xserver-xorg-dev 2:1.7.3.901-1ubuntu4 [1205kB] Get:9 http://ftpmaster.internal lucid/main xutils-dev 1:7.5~1ubuntu1 [328kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1781kB in 0s (5196kB/s) Selecting previously deselected package x11-common. (Reading database ... 12499 files and directories currently installed.) Unpacking x11-common (from .../x11-common_1%3a7.5~3ubuntu4_all.deb) ... Selecting previously deselected package libxau6. Unpacking libxau6 (from .../libxau6_1%3a1.0.5-1_armel.deb) ... Selecting previously deselected package libxdmcp6. Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.3-1_armel.deb) ... Selecting previously deselected package libxcb1. Unpacking libxcb1 (from .../libxcb1_1.4-1_armel.deb) ... Selecting previously deselected package libx11-data. Unpacking libx11-data (from .../libx11-data_2%3a1.3.2-1ubuntu1_all.deb) ... Selecting previously deselected package libx11-6. Unpacking libx11-6 (from .../libx11-6_2%3a1.3.2-1ubuntu1_armel.deb) ... Selecting previously deselected package x11proto-core-dev. Unpacking x11proto-core-dev (from .../x11proto-core-dev_7.0.16-1_all.deb) ... Setting up x11-common (1:7.5~3ubuntu4) ... Selecting previously deselected package libxau-dev. (Reading database ... 12885 files and directories currently installed.) Unpacking libxau-dev (from .../libxau-dev_1%3a1.0.5-1_armel.deb) ... Selecting previously deselected package libxdmcp-dev. Unpacking libxdmcp-dev (from .../libxdmcp-dev_1%3a1.0.3-1_armel.deb) ... Selecting previously deselected package x11proto-input-dev. Unpacking x11proto-input-dev (from .../x11proto-input-dev_2.0-1_all.deb) ... Selecting previously deselected package x11proto-kb-dev. Unpacking x11proto-kb-dev (from .../x11proto-kb-dev_1.0.4-1_all.deb) ... Selecting previously deselected package xtrans-dev. Unpacking xtrans-dev (from .../xtrans-dev_1.2.5-1_all.deb) ... Selecting previously deselected package libpthread-stubs0. Unpacking libpthread-stubs0 (from .../libpthread-stubs0_0.3-2_armel.deb) ... Selecting previously deselected package libpthread-stubs0-dev. Unpacking libpthread-stubs0-dev (from .../libpthread-stubs0-dev_0.3-2_armel.deb) ... Selecting previously deselected package libxcb1-dev. Unpacking libxcb1-dev (from .../libxcb1-dev_1.4-1_armel.deb) ... Selecting previously deselected package libx11-dev. Unpacking libx11-dev (from .../libx11-dev_2%3a1.3.2-1ubuntu1_armel.deb) ... Selecting previously deselected package x11proto-dri2-dev. Unpacking x11proto-dri2-dev (from .../x11proto-dri2-dev_2.1-1_all.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_5.03-5_armel.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_5.03-5_armel.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.8-3_armel.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.23.0-1ubuntu3_armel.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.6.dfsg-1ubuntu1_armel.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.0.1ubuntu1_armel.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-8ubuntu2_armel.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.20.1-6_armel.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.6-4_armel.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../archives/m4_1.4.13-3_armel.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.65-3ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20090611.1_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.11-1_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-14_armel.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_armel.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-8ubuntu2_armel.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.4.10ubuntu1_all.deb) ... Selecting previously deselected package diffstat. Unpacking diffstat (from .../diffstat_1.47-1_armel.deb) ... Selecting previously deselected package libpixman-1-0. Unpacking libpixman-1-0 (from .../libpixman-1-0_0.16.2-1_armel.deb) ... Selecting previously deselected package libpixman-1-dev. Unpacking libpixman-1-dev (from .../libpixman-1-dev_0.16.2-1_armel.deb) ... Selecting previously deselected package libtool. Unpacking libtool (from .../libtool_2.2.6a-4_armel.deb) ... Selecting previously deselected package libxkbfile1. Unpacking libxkbfile1 (from .../libxkbfile1_1%3a1.0.6-1_armel.deb) ... Selecting previously deselected package libxkbfile-dev. Unpacking libxkbfile-dev (from .../libxkbfile-dev_1%3a1.0.6-1_armel.deb) ... Selecting previously deselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.22-1build1_armel.deb) ... Selecting previously deselected package quilt. Unpacking quilt (from .../quilt_0.48-1ubuntu1_all.deb) ... Selecting previously deselected package x11proto-fonts-dev. Unpacking x11proto-fonts-dev (from .../x11proto-fonts-dev_2.1.0-1_all.deb) ... Selecting previously deselected package x11proto-randr-dev. Unpacking x11proto-randr-dev (from .../x11proto-randr-dev_1.3.1-1_all.deb) ... Selecting previously deselected package x11proto-render-dev. Unpacking x11proto-render-dev (from .../x11proto-render-dev_2%3a0.11-1_all.deb) ... Selecting previously deselected package x11proto-video-dev. Unpacking x11proto-video-dev (from .../x11proto-video-dev_2.3.0-1_all.deb) ... Selecting previously deselected package x11proto-xext-dev. Unpacking x11proto-xext-dev (from .../x11proto-xext-dev_7.1.1-1_all.deb) ... Selecting previously deselected package libpciaccess0. Unpacking libpciaccess0 (from .../libpciaccess0_0.10.9-1_armel.deb) ... Selecting previously deselected package libpciaccess-dev. Unpacking libpciaccess-dev (from .../libpciaccess-dev_0.10.9-1_armel.deb) ... Selecting previously deselected package xserver-xorg-dev. Unpacking xserver-xorg-dev (from .../xserver-xorg-dev_2%3a1.7.3.901-1ubuntu4_armel.deb) ... Selecting previously deselected package xutils-dev. Unpacking xutils-dev (from .../xutils-dev_1%3a7.5~1ubuntu1_armel.deb) ... Setting up libxau6 (1:1.0.5-1) ... Setting up libxdmcp6 (1:1.0.3-1) ... Setting up libxcb1 (1.4-1) ... Setting up libx11-data (2:1.3.2-1ubuntu1) ... Setting up libx11-6 (2:1.3.2-1ubuntu1) ... Setting up x11proto-core-dev (7.0.16-1) ... Setting up libxau-dev (1:1.0.5-1) ... Setting up libxdmcp-dev (1:1.0.3-1) ... Setting up x11proto-input-dev (2.0-1) ... Setting up x11proto-kb-dev (1.0.4-1) ... Setting up xtrans-dev (1.2.5-1) ... Setting up libpthread-stubs0 (0.3-2) ... Setting up libpthread-stubs0-dev (0.3-2) ... Setting up libxcb1-dev (1.4-1) ... Setting up libx11-dev (2:1.3.2-1ubuntu1) ... Setting up x11proto-dri2-dev (2.1-1) ... Setting up libmagic1 (5.03-5) ... Setting up file (5.03-5) ... Setting up libpcre3 (7.8-3) ... Setting up libglib2.0-0 (2.23.0-1ubuntu3) ... Setting up libxml2 (2.7.6.dfsg-1ubuntu1) ... Setting up bsdmainutils (8.0.1ubuntu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. Setting up gettext-base (0.17-8ubuntu2) ... Setting up groff-base (1.20.1-6) ... Setting up man-db (2.5.6-4) ... Building database of manual pages ... Setting up m4 (1.4.13-3) ... Setting up autoconf (2.65-3ubuntu1) ... Setting up autotools-dev (20090611.1) ... Setting up automake (1:1.11-1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode. Setting up html2text (1.3.2a-14) ... Setting up libcroco3 (0.6.2-1) ... Setting up gettext (0.17-8ubuntu2) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16) ... Setting up debhelper (7.4.10ubuntu1) ... Setting up diffstat (1.47-1) ... Setting up libpixman-1-0 (0.16.2-1) ... Setting up libpixman-1-dev (0.16.2-1) ... Setting up libtool (2.2.6a-4) ... Setting up libxkbfile1 (1:1.0.6-1) ... Setting up libxkbfile-dev (1:1.0.6-1) ... Setting up pkg-config (0.22-1build1) ... Setting up quilt (0.48-1ubuntu1) ... Setting up x11proto-fonts-dev (2.1.0-1) ... Setting up x11proto-randr-dev (1.3.1-1) ... Setting up x11proto-render-dev (2:0.11-1) ... Setting up x11proto-video-dev (2.3.0-1) ... Setting up x11proto-xext-dev (7.1.1-1) ... Setting up libpciaccess0 (0.10.9-1) ... Setting up libpciaccess-dev (0.10.9-1) ... Setting up xserver-xorg-dev (2:1.7.3.901-1ubuntu4) ... Setting up xutils-dev (1:7.5~1ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.10.2-3ubuntu1 make_3.81-7 dpkg-dev_1.15.4.1ubuntu1 g++-4.4_4.4.2-8ubuntu1 gcc-4.4_4.4.2-8ubuntu1 binutils_2.20-4ubuntu4 libstdc++6_4.4.2-8ubuntu1 libstdc++6-4.4-dev_4.4.2-8ubuntu1 ------------------------------------------------------------------------------ gpgv: Signature made Tue Jan 5 12:40:08 2010 UTC using DSA key ID 5662C734 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./xserver-xorg-video-nv_2.1.15-1ubuntu2.dsc dpkg-source: info: extracting xserver-xorg-video-nv in xserver-xorg-video-nv-2.1.15 dpkg-source: info: unpacking xserver-xorg-video-nv_2.1.15.orig.tar.gz dpkg-source: info: applying xserver-xorg-video-nv_2.1.15-1ubuntu2.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package xserver-xorg-video-nv dpkg-buildpackage: source version 1:2.1.15-1ubuntu2 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean rm -f stampdir/genscripts rm -f debian/*.config \ debian/*.postinst \ debian/*.postrm \ debian/*.preinst \ debian/*.prerm mkdir stampdir >stampdir/stampdir mkdir -p stampdir/log rm -f stampdir/patch Unapplying patches...nothing to do. dh_testdir rm -rf .pc rm -rf stampdir dh_clean dh_testdir dh_testroot rm -f build-stamp rm -f config.cache config.log config.status rm -f */config.cache */config.log */config.status rm -f conftest* */conftest* rm -rf autom4te.cache */autom4te.cache rm -rf obj-* rm -f $(find -name Makefile.in) rm -f compile config.guess config.sub configure depcomp install-sh rm -f ltmain.sh missing INSTALL aclocal.m4 config.h.in mkinstalldirs dh_clean debian/rules build mkdir stampdir >stampdir/stampdir mkdir -p stampdir/log for FILE in debian/*.config.in \ debian/*.postinst.in \ debian/*.postrm.in \ debian/*.preinst.in \ debian/*.prerm.in; do \ if [ -e "$FILE" ]; then \ MAINTSCRIPT=$(echo $FILE | sed 's/.in$//'); \ sed -n '1,/^#INCLUDE_SHELL_LIB#$/p' <$FILE \ | sed -e '/^#INCLUDE_SHELL_LIB#$/d' >$MAINTSCRIPT.tmp; \ cat debian/xsfbs/xsfbs.sh >>$MAINTSCRIPT.tmp; \ sed -n '/^#INCLUDE_SHELL_LIB#$/,$p' <$FILE \ | sed -e '/^#INCLUDE_SHELL_LIB#$/d' >>$MAINTSCRIPT.tmp; \ sed -e 's/@SOURCE_VERSION@/1:2.1.15-1ubuntu2/' \ -e 's/@OFFICIAL_BUILD@//' \ <$MAINTSCRIPT.tmp >$MAINTSCRIPT; \ rm $MAINTSCRIPT.tmp; \ fi; \ done # Validate syntax of generated shell scripts. #sh debian/scripts/validate-posix-sh debian/*.config \ # debian/*.postinst \ # debian/*.postrm \ # debian/*.preinst \ # debian/*.prerm >stampdir/genscripts >stampdir/prepare if ! [ `which quilt` ]; then \ echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \ exit 1; \ fi; \ if QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null next >/dev/null 2>&1; then \ echo -n "Applying patches..."; \ if QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a -v >stampdir/log/patch 2>&1; then \ cat stampdir/log/patch; \ echo "successful."; \ else \ cat stampdir/log/patch; \ echo "failed! (check stampdir/log/patch for details)"; \ exit 1; \ fi; \ else \ echo "No patches to apply"; \ fi; \ >stampdir/patch Applying patches...Applying patch 0001-Move-the-logic-for-matching-devices-out-of-probe-rou.patch patching file src/nv_driver.c patching file src/pcidb/nv_list.csv patching file src/pcidb/parse_pci_ids.pl Applying patch 0002-Run-the-parsing-script-to-generate-an-initial-list-o.patch patching file src/nvidia_chipset_gen.h patching file src/nvidia_pci_device_match_gen.h Applying patch 100_fedora-panel-fix.patch patching file src/nv_setup.c Applying patch 105_gf7025_gf7050.patch patching file src/nv_driver.c Hunk #1 succeeded at 1254 (offset 4 lines). patching file src/nv_hw.c patching file src/nvidia_chipset_gen.h patching file src/nvidia_pci_device_match_gen.h patching file src/pcidb/nv_list.csv Applying patch 110_do_not_crash_on_17.patch patching file src/g80_display.c Now at patch 110_do_not_crash_on_17.patch successful. dh_testdir autoreconf -vfi autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force autoreconf: configure.ac: tracing autoreconf: running: libtoolize --install --copy --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. libtoolize: copying file `./config.guess' libtoolize: copying file `./config.sub' libtoolize: copying file `./install-sh' libtoolize: copying file `./ltmain.sh' libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. autoreconf: running: /usr/bin/autoconf --force autoreconf: running: /usr/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.ac:38: installing `./missing' src/Makefile.am: installing `./depcomp' autoreconf: Leaving directory `.' dh_testdir mkdir -p obj-arm-linux-gnueabi cd obj-arm-linux-gnueabi && \ ../configure --prefix=/usr --mandir=\${prefix}/share/man \ --infodir=\${prefix}/share/info --build=arm-linux-gnueabi --disable-static \ CFLAGS="-Wall -g -O2" checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... arm-unknown-linux-gnueabi checking host system type... arm-unknown-linux-gnueabi checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 805306365 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking if RANDR is defined... yes checking if RENDER is defined... yes checking if XV is defined... yes checking if DPMSExtension is defined... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for XORG... yes checking for XEXT... yes checking for ANSI C header files... (cached) yes checking for xf86Modes.h... yes checking whether XSERVER_LIBPCIACCESS is declared... yes checking for PCIACCESS... yes configure: X server has new mode code configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating man/Makefile config.status: creating compat/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands dh_testdir cd obj-arm-linux-gnueabi && /usr/bin/make make[1]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' /usr/bin/make all-recursive make[2]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' Making all in src make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/src' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_cursor.lo -MD -MP -MF .deps/nv_cursor.Tpo -c -o nv_cursor.lo ../../src/nv_cursor.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_cursor.lo -MD -MP -MF .deps/nv_cursor.Tpo -c ../../src/nv_cursor.c -fPIC -DPIC -o .libs/nv_cursor.o mv -f .deps/nv_cursor.Tpo .deps/nv_cursor.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_dac.lo -MD -MP -MF .deps/nv_dac.Tpo -c -o nv_dac.lo ../../src/nv_dac.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_dac.lo -MD -MP -MF .deps/nv_dac.Tpo -c ../../src/nv_dac.c -fPIC -DPIC -o .libs/nv_dac.o mv -f .deps/nv_dac.Tpo .deps/nv_dac.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_dga.lo -MD -MP -MF .deps/nv_dga.Tpo -c -o nv_dga.lo ../../src/nv_dga.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_dga.lo -MD -MP -MF .deps/nv_dga.Tpo -c ../../src/nv_dga.c -fPIC -DPIC -o .libs/nv_dga.o mv -f .deps/nv_dga.Tpo .deps/nv_dga.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_driver.lo -MD -MP -MF .deps/nv_driver.Tpo -c -o nv_driver.lo ../../src/nv_driver.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_driver.lo -MD -MP -MF .deps/nv_driver.Tpo -c ../../src/nv_driver.c -fPIC -DPIC -o .libs/nv_driver.o mv -f .deps/nv_driver.Tpo .deps/nv_driver.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_hw.lo -MD -MP -MF .deps/nv_hw.Tpo -c -o nv_hw.lo ../../src/nv_hw.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_hw.lo -MD -MP -MF .deps/nv_hw.Tpo -c ../../src/nv_hw.c -fPIC -DPIC -o .libs/nv_hw.o mv -f .deps/nv_hw.Tpo .deps/nv_hw.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_setup.lo -MD -MP -MF .deps/nv_setup.Tpo -c -o nv_setup.lo ../../src/nv_setup.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_setup.lo -MD -MP -MF .deps/nv_setup.Tpo -c ../../src/nv_setup.c -fPIC -DPIC -o .libs/nv_setup.o mv -f .deps/nv_setup.Tpo .deps/nv_setup.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_shadow.lo -MD -MP -MF .deps/nv_shadow.Tpo -c -o nv_shadow.lo ../../src/nv_shadow.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_shadow.lo -MD -MP -MF .deps/nv_shadow.Tpo -c ../../src/nv_shadow.c -fPIC -DPIC -o .libs/nv_shadow.o mv -f .deps/nv_shadow.Tpo .deps/nv_shadow.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_video.lo -MD -MP -MF .deps/nv_video.Tpo -c -o nv_video.lo ../../src/nv_video.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_video.lo -MD -MP -MF .deps/nv_video.Tpo -c ../../src/nv_video.c -fPIC -DPIC -o .libs/nv_video.o mv -f .deps/nv_video.Tpo .deps/nv_video.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_xaa.lo -MD -MP -MF .deps/nv_xaa.Tpo -c -o nv_xaa.lo ../../src/nv_xaa.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT nv_xaa.lo -MD -MP -MF .deps/nv_xaa.Tpo -c ../../src/nv_xaa.c -fPIC -DPIC -o .libs/nv_xaa.o mv -f .deps/nv_xaa.Tpo .deps/nv_xaa.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_cursor.lo -MD -MP -MF .deps/riva_cursor.Tpo -c -o riva_cursor.lo ../../src/riva_cursor.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_cursor.lo -MD -MP -MF .deps/riva_cursor.Tpo -c ../../src/riva_cursor.c -fPIC -DPIC -o .libs/riva_cursor.o mv -f .deps/riva_cursor.Tpo .deps/riva_cursor.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_dac.lo -MD -MP -MF .deps/riva_dac.Tpo -c -o riva_dac.lo ../../src/riva_dac.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_dac.lo -MD -MP -MF .deps/riva_dac.Tpo -c ../../src/riva_dac.c -fPIC -DPIC -o .libs/riva_dac.o mv -f .deps/riva_dac.Tpo .deps/riva_dac.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_dga.lo -MD -MP -MF .deps/riva_dga.Tpo -c -o riva_dga.lo ../../src/riva_dga.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_dga.lo -MD -MP -MF .deps/riva_dga.Tpo -c ../../src/riva_dga.c -fPIC -DPIC -o .libs/riva_dga.o mv -f .deps/riva_dga.Tpo .deps/riva_dga.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_driver.lo -MD -MP -MF .deps/riva_driver.Tpo -c -o riva_driver.lo ../../src/riva_driver.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_driver.lo -MD -MP -MF .deps/riva_driver.Tpo -c ../../src/riva_driver.c -fPIC -DPIC -o .libs/riva_driver.o mv -f .deps/riva_driver.Tpo .deps/riva_driver.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_hw.lo -MD -MP -MF .deps/riva_hw.Tpo -c -o riva_hw.lo ../../src/riva_hw.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_hw.lo -MD -MP -MF .deps/riva_hw.Tpo -c ../../src/riva_hw.c -fPIC -DPIC -o .libs/riva_hw.o mv -f .deps/riva_hw.Tpo .deps/riva_hw.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_setup.lo -MD -MP -MF .deps/riva_setup.Tpo -c -o riva_setup.lo ../../src/riva_setup.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_setup.lo -MD -MP -MF .deps/riva_setup.Tpo -c ../../src/riva_setup.c -fPIC -DPIC -o .libs/riva_setup.o mv -f .deps/riva_setup.Tpo .deps/riva_setup.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_shadow.lo -MD -MP -MF .deps/riva_shadow.Tpo -c -o riva_shadow.lo ../../src/riva_shadow.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_shadow.lo -MD -MP -MF .deps/riva_shadow.Tpo -c ../../src/riva_shadow.c -fPIC -DPIC -o .libs/riva_shadow.o mv -f .deps/riva_shadow.Tpo .deps/riva_shadow.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_xaa.lo -MD -MP -MF .deps/riva_xaa.Tpo -c -o riva_xaa.lo ../../src/riva_xaa.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT riva_xaa.lo -MD -MP -MF .deps/riva_xaa.Tpo -c ../../src/riva_xaa.c -fPIC -DPIC -o .libs/riva_xaa.o mv -f .deps/riva_xaa.Tpo .deps/riva_xaa.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_cursor.lo -MD -MP -MF .deps/g80_cursor.Tpo -c -o g80_cursor.lo ../../src/g80_cursor.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_cursor.lo -MD -MP -MF .deps/g80_cursor.Tpo -c ../../src/g80_cursor.c -fPIC -DPIC -o .libs/g80_cursor.o mv -f .deps/g80_cursor.Tpo .deps/g80_cursor.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_dac.lo -MD -MP -MF .deps/g80_dac.Tpo -c -o g80_dac.lo ../../src/g80_dac.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_dac.lo -MD -MP -MF .deps/g80_dac.Tpo -c ../../src/g80_dac.c -fPIC -DPIC -o .libs/g80_dac.o mv -f .deps/g80_dac.Tpo .deps/g80_dac.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_display.lo -MD -MP -MF .deps/g80_display.Tpo -c -o g80_display.lo ../../src/g80_display.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_display.lo -MD -MP -MF .deps/g80_display.Tpo -c ../../src/g80_display.c -fPIC -DPIC -o .libs/g80_display.o ../../src/g80_display.c: In function 'G80CrtcSetPClk': ../../src/g80_display.c:214: warning: unused variable 'i' ../../src/g80_display.c: In function 'G80DispCommand': ../../src/g80_display.c:229: warning: 'n' may be used uninitialized in this function ../../src/g80_display.c:229: note: 'n' was declared here ../../src/g80_display.c:229: warning: 'pl' may be used uninitialized in this function ../../src/g80_display.c:229: note: 'pl' was declared here mv -f .deps/g80_display.Tpo .deps/g80_display.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_dma.lo -MD -MP -MF .deps/g80_dma.Tpo -c -o g80_dma.lo ../../src/g80_dma.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_dma.lo -MD -MP -MF .deps/g80_dma.Tpo -c ../../src/g80_dma.c -fPIC -DPIC -o .libs/g80_dma.o mv -f .deps/g80_dma.Tpo .deps/g80_dma.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_driver.lo -MD -MP -MF .deps/g80_driver.Tpo -c -o g80_driver.lo ../../src/g80_driver.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_driver.lo -MD -MP -MF .deps/g80_driver.Tpo -c ../../src/g80_driver.c -fPIC -DPIC -o .libs/g80_driver.o mv -f .deps/g80_driver.Tpo .deps/g80_driver.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_exa.lo -MD -MP -MF .deps/g80_exa.Tpo -c -o g80_exa.lo ../../src/g80_exa.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_exa.lo -MD -MP -MF .deps/g80_exa.Tpo -c ../../src/g80_exa.c -fPIC -DPIC -o .libs/g80_exa.o mv -f .deps/g80_exa.Tpo .deps/g80_exa.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_output.lo -MD -MP -MF .deps/g80_output.Tpo -c -o g80_output.lo ../../src/g80_output.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_output.lo -MD -MP -MF .deps/g80_output.Tpo -c ../../src/g80_output.c -fPIC -DPIC -o .libs/g80_output.o mv -f .deps/g80_output.Tpo .deps/g80_output.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_sor.lo -MD -MP -MF .deps/g80_sor.Tpo -c -o g80_sor.lo ../../src/g80_sor.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_sor.lo -MD -MP -MF .deps/g80_sor.Tpo -c ../../src/g80_sor.c -fPIC -DPIC -o .libs/g80_sor.o mv -f .deps/g80_sor.Tpo .deps/g80_sor.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_xaa.lo -MD -MP -MF .deps/g80_xaa.Tpo -c -o g80_xaa.lo ../../src/g80_xaa.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT g80_xaa.lo -MD -MP -MF .deps/g80_xaa.Tpo -c ../../src/g80_xaa.c -fPIC -DPIC -o .libs/g80_xaa.o mv -f .deps/g80_xaa.Tpo .deps/g80_xaa.Plo /bin/bash ../libtool --tag=CC --mode=link gcc -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -module -avoid-version -Wl,-Bsymbolic-functions -o nv_drv.la -rpath /usr/lib/xorg/modules/drivers nv_cursor.lo nv_dac.lo nv_dga.lo nv_driver.lo nv_hw.lo nv_setup.lo nv_shadow.lo nv_video.lo nv_xaa.lo riva_cursor.lo riva_dac.lo riva_dga.lo riva_driver.lo riva_hw.lo riva_setup.lo riva_shadow.lo riva_xaa.lo g80_cursor.lo g80_dac.lo g80_display.lo g80_dma.lo g80_driver.lo g80_exa.lo g80_output.lo g80_sor.lo g80_xaa.lo libtool: link: gcc -shared .libs/nv_cursor.o .libs/nv_dac.o .libs/nv_dga.o .libs/nv_driver.o .libs/nv_hw.o .libs/nv_setup.o .libs/nv_shadow.o .libs/nv_video.o .libs/nv_xaa.o .libs/riva_cursor.o .libs/riva_dac.o .libs/riva_dga.o .libs/riva_driver.o .libs/riva_hw.o .libs/riva_setup.o .libs/riva_shadow.o .libs/riva_xaa.o .libs/g80_cursor.o .libs/g80_dac.o .libs/g80_display.o .libs/g80_dma.o .libs/g80_driver.o .libs/g80_exa.o .libs/g80_output.o .libs/g80_sor.o .libs/g80_xaa.o -Wl,-Bsymbolic-functions -Wl,-soname -Wl,nv_drv.so -o .libs/nv_drv.so libtool: link: ( cd ".libs" && rm -f "nv_drv.la" && ln -s "../nv_drv.la" "nv_drv.la" ) make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/src' Making all in man make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/man' sed -e 's|__vendorversion__|"xf86-video-nv 2.1.15" "X Version 11"|' -e 's|__xorgversion__|"xf86-video-nv 2.1.15" "X Version 11"|' -e 's|__xservername__|Xorg|g' -e 's|__xconfigfile__|xorg.conf|g' -e 's|__projectroot__|/usr|g' -e 's|__appmansuffix__|1|g' -e 's|__drivermansuffix__|4|g' -e 's|__adminmansuffix__|8|g' -e 's|__miscmansuffix__|7|g' -e 's|__filemansuffix__|5|g' < ../../man/nv.man > nv.4 make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/man' Making all in compat make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/compat' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/compat' make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' make[2]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' make[1]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' >build-stamp /usr/bin/fakeroot debian/rules binary-arch >stampdir/prepare if ! [ `which quilt` ]; then \ echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \ exit 1; \ fi; \ if QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null next >/dev/null 2>&1; then \ echo -n "Applying patches..."; \ if QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a -v >stampdir/log/patch 2>&1; then \ cat stampdir/log/patch; \ echo "successful."; \ else \ cat stampdir/log/patch; \ echo "failed! (check stampdir/log/patch for details)"; \ exit 1; \ fi; \ else \ echo "No patches to apply"; \ fi; \ >stampdir/patch No patches to apply dh_testdir autoreconf -vfi autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force autoreconf: configure.ac: tracing autoreconf: running: libtoolize --install --copy --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. libtoolize: copying file `./config.guess' libtoolize: copying file `./config.sub' libtoolize: serial numbers `2006.12.25.00' or `2009.04.28.21; # UTC' contain non-digit chars libtoolize: copying file `./install-sh' libtoolize: copying file `./ltmain.sh' libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. autoreconf: running: /usr/bin/autoconf --force autoreconf: running: /usr/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing autoreconf: Leaving directory `.' dh_testdir mkdir -p obj-arm-linux-gnueabi cd obj-arm-linux-gnueabi && \ ../configure --prefix=/usr --mandir=\${prefix}/share/man \ --infodir=\${prefix}/share/info --build=arm-linux-gnueabi --disable-static \ CFLAGS="-Wall -g -O2" checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... arm-unknown-linux-gnueabi checking host system type... arm-unknown-linux-gnueabi checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 805306365 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking if RANDR is defined... yes checking if RENDER is defined... yes checking if XV is defined... yes checking if DPMSExtension is defined... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for XORG... yes checking for XEXT... yes checking for ANSI C header files... (cached) yes checking for xf86Modes.h... yes checking whether XSERVER_LIBPCIACCESS is declared... yes checking for PCIACCESS... yes configure: X server has new mode code configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating man/Makefile config.status: creating compat/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands dh_testdir cd obj-arm-linux-gnueabi && /usr/bin/make make[1]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' /usr/bin/make all-recursive make[2]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' Making all in src make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/src' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/src' Making all in man make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/man' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/man' Making all in compat make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/compat' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/compat' make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' make[2]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' make[1]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' >build-stamp dh_testdir dh_testroot dh_clean -k dh_installdirs cd obj-arm-linux-gnueabi && /usr/bin/make DESTDIR=/build/buildd/xserver-xorg-video-nv-2.1.15/debian/tmp install make[1]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' Making install in src make[2]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/src' make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/src' make[3]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/xorg/modules/drivers" || /bin/mkdir -p "/build/buildd/xserver-xorg-video-nv-2.1.15/debian/tmp/usr/lib/xorg/modules/drivers" /bin/bash ../libtool --mode=install /usr/bin/install -c nv_drv.la '/build/buildd/xserver-xorg-video-nv-2.1.15/debian/tmp/usr/lib/xorg/modules/drivers' libtool: install: /usr/bin/install -c .libs/nv_drv.so /build/buildd/xserver-xorg-video-nv-2.1.15/debian/tmp/usr/lib/xorg/modules/drivers/nv_drv.so libtool: install: /usr/bin/install -c .libs/nv_drv.lai /build/buildd/xserver-xorg-video-nv-2.1.15/debian/tmp/usr/lib/xorg/modules/drivers/nv_drv.la libtool: install: warning: remember to run `libtool --finish /usr/lib/xorg/modules/drivers' make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/src' make[2]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/src' Making install in man make[2]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/man' make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/man' make[3]: Nothing to be done for `install-exec-am'. test -z "/usr/share/man/man4" || /bin/mkdir -p "/build/buildd/xserver-xorg-video-nv-2.1.15/debian/tmp/usr/share/man/man4" /usr/bin/install -c -m 644 nv.4 '/build/buildd/xserver-xorg-video-nv-2.1.15/debian/tmp/usr/share/man/man4' make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/man' make[2]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/man' Making install in compat make[2]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/compat' make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/compat' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/compat' make[2]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi/compat' make[2]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' make[3]: Entering directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' make[2]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' make[1]: Leaving directory `/build/buildd/xserver-xorg-video-nv-2.1.15/obj-arm-linux-gnueabi' echo "xserver:Depends=xserver-xorg-core (>= 2:1.6.99.900)" >> debian/xserver-xorg-video-nv.substvars echo "xviddriver:Provides=xserver-xorg-video-6" >> debian/xserver-xorg-video-nv.substvars echo "xinpdriver:Provides=xserver-xorg-input-7" >> debian/xserver-xorg-video-nv.substvars dh_testdir dh_testroot dh_installdocs README.G80 dh_installchangelogs ChangeLog dh_install --sourcedir=debian/tmp --list-missing --exclude=.la dh_link dh_strip dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: xserver-xorg-video-nv dh_strip debug symbol extraction: packages to act on: xserver-xorg-video-nv dh_strip debug symbol extraction: ignored packages: WARNING: not running pkgbinarymangler for this package, as requested dpkg-deb: warning: '/build/buildd/xserver-xorg-video-nv-2.1.15/debian/xserver-xorg-video-nv-dbgsym/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warnings about the control file(s) dpkg-deb: building package `xserver-xorg-video-nv-dbgsym' in `../xserver-xorg-video-nv-dbgsym_2.1.15-1ubuntu2_armel.ddeb'. dh_compress dh_fixperms dh_installdeb dh_shlibdeps -- --warnings=6 dh_gencontrol dpkg-gencontrol: warning: unused substitution variable ${xinpdriver:Provides} dh_md5sums dh_builddeb pkgstriptranslations: processing control file: ./debian/xserver-xorg-video-nv/DEBIAN/control, package xserver-xorg-video-nv, directory ./debian/xserver-xorg-video-nv pkgstriptranslations: xserver-xorg-video-nv does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgstriptranslations: static tarball already exists pkgmaintainermangler: Not overriding Maintainer for domain lists.ubuntu.com dpkg-deb: warning: 'debian/xserver-xorg-video-nv/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warnings about the control file(s) dpkg-deb: building package `xserver-xorg-video-nv' in `../xserver-xorg-video-nv_2.1.15-1ubuntu2_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../xserver-xorg-video-nv_2.1.15-1ubuntu2_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20100105-1254 Publishing debug debs. chroot-autobuild/build/buildd/xserver-xorg-video-nv_2.1.15-1ubuntu2_armel.deb: new debian package, version 2.0. size 103660 bytes: control archive= 966 bytes. 1092 bytes, 25 lines control 468 bytes, 6 lines md5sums Package: xserver-xorg-video-nv Version: 1:2.1.15-1ubuntu2 Architecture: armel Maintainer: Ubuntu X-SWAT Installed-Size: 236 Depends: libc6 (>= 2.4), xserver-xorg-core (>= 2:1.6.99.900) Conflicts: xserver-xorg-driver-nv, xserver-xorg-video-riva128 Replaces: xserver-xorg (<< 6.8.2-35), xserver-xorg-driver-nv, xserver-xorg-video-riva128 Provides: xf86-video-driver-riva128, xserver-xorg-video-6 Section: x11 Priority: optional Description: X.Org X server -- NV display driver This driver for the X.Org X server (see xserver-xorg for a further description) provides support for NVIDIA Riva, TNT, GeForce, and Quadro cards. . Note that this is not the same as the binary-only 'nvidia' driver, which adds 3D support, but is binary-only and not supported. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-nv driver module. Original-Maintainer: Debian X Strike Force chroot-autobuild/build/buildd/xserver-xorg-video-nv_2.1.15-1ubuntu2_armel.deb: drwxr-xr-x root/root 0 2010-01-05 12:53 ./ drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/ drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/share/ drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/share/doc/ drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/share/doc/xserver-xorg-video-nv/ -rw-r--r-- root/root 20087 2009-09-11 04:25 ./usr/share/doc/xserver-xorg-video-nv/changelog.gz -rw-r--r-- root/root 557 2009-03-09 23:24 ./usr/share/doc/xserver-xorg-video-nv/README.G80 -rw-r--r-- root/root 1901 2010-01-05 12:49 ./usr/share/doc/xserver-xorg-video-nv/copyright -rw-r--r-- root/root 4448 2010-01-05 12:49 ./usr/share/doc/xserver-xorg-video-nv/changelog.Debian.gz drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/share/bug/ drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/share/bug/xserver-xorg-video-nv/ drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/share/man/ drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/share/man/man4/ -rw-r--r-- root/root 3157 2010-01-05 12:53 ./usr/share/man/man4/nv.4.gz drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/lib/ drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/lib/xorg/ drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/lib/xorg/modules/ drwxr-xr-x root/root 0 2010-01-05 12:53 ./usr/lib/xorg/modules/drivers/ -rw-r--r-- root/root 136972 2010-01-05 12:53 ./usr/lib/xorg/modules/drivers/nv_drv.so lrwxrwxrwx root/root 0 2010-01-05 12:53 ./usr/share/bug/xserver-xorg-video-nv/script -> ../xserver-xorg-core/script xserver-xorg-video-nv_2.1.15-1ubuntu2_armel.changes: Format: 1.8 Date: Tue, 05 Jan 2010 13:24:33 +0100 Source: xserver-xorg-video-nv Binary: xserver-xorg-video-nv Architecture: armel Version: 1:2.1.15-1ubuntu2 Distribution: lucid Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: Michael Vogt Description: xserver-xorg-video-nv - X.Org X server -- NV display driver Changes: xserver-xorg-video-nv (1:2.1.15-1ubuntu2) lucid; urgency=low . * debian/patches/110_do_not_crash_on_17.patch: - merge git fix for LP: #494627 (from http://cgit.freedesktop.org/xorg/driver/xf86-video-nv/commit/?id=85638b2f0acc418aa77241dd123f7de76ea3ce8f) Checksums-Sha1: b0b736f35b445c84cc21a8d637aab840d103e155 103660 xserver-xorg-video-nv_2.1.15-1ubuntu2_armel.deb Checksums-Sha256: 03fc84bf74eac980aaa2550e3ff373b543e4a6f018ae7ae656993787a21ba0f3 103660 xserver-xorg-video-nv_2.1.15-1ubuntu2_armel.deb Files: ddcc4badc5dba0f912ee90d802e803ec 103660 x11 optional xserver-xorg-video-nv_2.1.15-1ubuntu2_armel.deb Launchpad-Bugs-Fixed: 494627 Original-Maintainer: Debian X Strike Force ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/xserver-xorg-video-nv-2.1.15 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge groff-base xtrans-dev x11proto-randr-dev libx11-data libglib2.0-0 m4 libxdmcp-dev x11proto-core-dev gettext file x11proto-fonts-dev libxcb1-dev x11proto-dri2-dev libxdmcp6 libpciaccess0 x11-common autotools-dev po-debconf quilt libx11-dev libcroco3 xserver-xorg-dev libxml2 x11proto-xext-dev pkg-config automake man-db libtool x11proto-kb-dev intltool-debian libpixman-1-0 libxcb1 x11proto-input-dev libpthread-stubs0-dev libxau-dev diffstat html2text libpixman-1-dev gettext-base debhelper libpthread-stubs0 xutils-dev libpciaccess-dev libmagic1 x11proto-render-dev x11proto-video-dev libxkbfile-dev bsdmainutils libxau6 libpcre3 libx11-6 libxkbfile1 autoconf (Reading database ... 15790 files and directories currently installed.) Removing quilt ... Purging configuration files for quilt ... Removing xserver-xorg-dev ... Removing x11proto-xext-dev ... Removing pkg-config ... Removing automake ... Removing libtool ... Removing diffstat ... Removing libpixman-1-dev ... Removing debhelper ... Removing xutils-dev ... Removing libpciaccess-dev ... Removing x11proto-render-dev ... Removing x11proto-video-dev ... Removing libxkbfile-dev ... Removing libxkbfile1 ... Purging configuration files for libxkbfile1 ... Removing autoconf ... Purging configuration files for autoconf ... Removing x11proto-randr-dev ... Removing m4 ... Removing file ... Purging configuration files for file ... Removing x11proto-fonts-dev ... Removing x11proto-dri2-dev ... Removing libpciaccess0 ... Purging configuration files for libpciaccess0 ... Removing autotools-dev ... Removing po-debconf ... Removing libx11-dev ... Removing man-db ... Purging configuration files for man-db ... Removing x11proto-kb-dev ... Removing intltool-debian ... Removing libpixman-1-0 ... Purging configuration files for libpixman-1-0 ... Removing x11proto-input-dev ... Removing html2text ... Purging configuration files for html2text ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing libx11-6 ... Purging configuration files for libx11-6 ... Removing groff-base ... Purging configuration files for groff-base ... Removing xtrans-dev ... Removing libx11-data ... Removing gettext ... Removing libxcb1-dev ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libxcb1 ... Purging configuration files for libxcb1 ... Removing libpthread-stubs0-dev ... Removing libxau-dev ... Removing gettext-base ... Removing libpthread-stubs0 ... Removing libxau6 ... Purging configuration files for libxau6 ... Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing libxdmcp-dev ... Removing x11proto-core-dev ... Removing libxdmcp6 ... Purging configuration files for libxdmcp6 ... Removing x11-common ... Purging configuration files for x11-common ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20100105-1254 Build needed 00:04:43, 9584k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '1430362-2947844'] Scanning for processes to kill in build /srv/home/buildd/build-1430362-2947844/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '1430362-2947844'] Unmounting chroot for build 1430362-2947844... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '1430362-2947844'] Removing build 1430362-2947844