RUN: /usr/share/launchpad-buildd/slavebin/slave-prep ['slave-prep'] Forking launchpad-buildd slave process... Kernel version: 2.6.31-612-imx51 #32-Ubuntu Tue Dec 20 16:25:38 UTC 2011 armv7l Buildd toolchain package versions: launchpad-buildd_110~0.IS.08.04 python-lpbuildd_110~0.IS.08.04 bzr_2.4.0-0ubuntu2~9.IS.10.04.3. Syncing the system clock with the buildd NTP service... 15 Feb 16:32:23 ntpdate[10262]: adjust time server 10.211.37.1 offset -0.000266 sec RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '32d626e9295645230b8c0e7e4887e91c8486687c', '/home/buildd/filecache-default/2e25fe525e48ce817846b9d423426bdab4ef75aa'] Unpacking chroot for build 32d626e9295645230b8c0e7e4887e91c8486687c RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '32d626e9295645230b8c0e7e4887e91c8486687c'] Mounting chroot for build 32d626e9295645230b8c0e7e4887e91c8486687c RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '32d626e9295645230b8c0e7e4887e91c8486687c', 'deb http://ftpmaster.internal/ubuntu precise main universe'] Overriding sources.list in build-32d626e9295645230b8c0e7e4887e91c8486687c RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '32d626e9295645230b8c0e7e4887e91c8486687c', 'armel'] Updating debian chroot for build 32d626e9295645230b8c0e7e4887e91c8486687c Ign http://ftpmaster.internal precise InRelease Get:1 http://ftpmaster.internal precise Release.gpg [198 B] Get:2 http://ftpmaster.internal precise Release [49.6 kB] Get:3 http://ftpmaster.internal precise/main armel Packages [1279 kB] Get:4 http://ftpmaster.internal precise/universe armel Packages [4665 kB] Get:5 http://ftpmaster.internal precise/main TranslationIndex [3570 B] Get:6 http://ftpmaster.internal precise/universe TranslationIndex [2784 B] Get:7 http://ftpmaster.internal precise/main Translation-en [725 kB] Get:8 http://ftpmaster.internal precise/universe Translation-en [3352 kB] Fetched 10.1 MB in 51s (194 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: apt apt-transport-https ca-certificates cpp-4.6 debconf g++-4.6 gcc-4.6 gcc-4.6-base gzip ifupdown libapt-pkg4.12 libc-bin libc-dev-bin libc6 libc6-dev libgcc1 libglib2.0-0 libgomp1 libnih-dbus1 libnih1 libpam-modules libpam-modules-bin libpam-runtime libpam0g libsasl2-2 libssl1.0.0 libstdc++6 libstdc++6-4.6-dev libudev0 linux-libc-dev login multiarch-support netbase openssl passwd pkgbinarymangler udev 37 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 30.1 MB of archives. After this operation, 434 kB disk space will be freed. WARNING: The following packages cannot be authenticated! gzip login libnih-dbus1 libc-bin libc6-dev libc-dev-bin libc6 libnih1 linux-libc-dev libgomp1 gcc-4.6-base libgcc1 cpp-4.6 libstdc++6-4.6-dev g++-4.6 gcc-4.6 libstdc++6 libapt-pkg4.12 debconf libpam0g libpam-modules-bin libpam-modules libssl1.0.0 libglib2.0-0 libudev0 libsasl2-2 apt libpam-runtime multiarch-support passwd netbase ifupdown udev apt-transport-https openssl ca-certificates pkgbinarymangler Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ precise/main gzip armel 1.4-1ubuntu2 [84.9 kB] Get:2 http://ftpmaster.internal/ubuntu/ precise/main login armel 1:4.1.4.2+svn3283-3ubuntu4 [281 kB] Get:3 http://ftpmaster.internal/ubuntu/ precise/main libnih-dbus1 armel 1.0.3-4ubuntu8 [14.1 kB] Get:4 http://ftpmaster.internal/ubuntu/ precise/main libc-bin armel 2.15-0ubuntu2 [1015 kB] Get:5 http://ftpmaster.internal/ubuntu/ precise/main libc6-dev armel 2.15-0ubuntu2 [2123 kB] Get:6 http://ftpmaster.internal/ubuntu/ precise/main libc-dev-bin armel 2.15-0ubuntu2 [73.8 kB] Get:7 http://ftpmaster.internal/ubuntu/ precise/main libc6 armel 2.15-0ubuntu2 [3812 kB] Get:8 http://ftpmaster.internal/ubuntu/ precise/main libnih1 armel 1.0.3-4ubuntu8 [48.7 kB] Get:9 http://ftpmaster.internal/ubuntu/ precise/main linux-libc-dev armel 3.2.0-16.25 [819 kB] Get:10 http://ftpmaster.internal/ubuntu/ precise/main libgomp1 armel 4.6.2-14ubuntu1 [23.6 kB] Get:11 http://ftpmaster.internal/ubuntu/ precise/main gcc-4.6-base armel 4.6.2-14ubuntu1 [15.8 kB] Get:12 http://ftpmaster.internal/ubuntu/ precise/main libgcc1 armel 1:4.6.2-14ubuntu1 [22.0 kB] Get:13 http://ftpmaster.internal/ubuntu/ precise/main cpp-4.6 armel 4.6.2-14ubuntu1 [4100 kB] Get:14 http://ftpmaster.internal/ubuntu/ precise/main libstdc++6-4.6-dev armel 4.6.2-14ubuntu1 [1701 kB] Get:15 http://ftpmaster.internal/ubuntu/ precise/main g++-4.6 armel 4.6.2-14ubuntu1 [4978 kB] Get:16 http://ftpmaster.internal/ubuntu/ precise/main gcc-4.6 armel 4.6.2-14ubuntu1 [4558 kB] Get:17 http://ftpmaster.internal/ubuntu/ precise/main libstdc++6 armel 4.6.2-14ubuntu1 [268 kB] Get:18 http://ftpmaster.internal/ubuntu/ precise/main libapt-pkg4.12 armel 0.8.16~exp12ubuntu4 [860 kB] Get:19 http://ftpmaster.internal/ubuntu/ precise/main debconf all 1.5.41ubuntu2 [142 kB] Get:20 http://ftpmaster.internal/ubuntu/ precise/main libpam0g armel 1.1.3-7ubuntu2 [54.3 kB] Get:21 http://ftpmaster.internal/ubuntu/ precise/main libpam-modules-bin armel 1.1.3-7ubuntu2 [36.3 kB] Get:22 http://ftpmaster.internal/ubuntu/ precise/main libpam-modules armel 1.1.3-7ubuntu2 [242 kB] Get:23 http://ftpmaster.internal/ubuntu/ precise/main libssl1.0.0 armel 1.0.0g-1ubuntu1 [781 kB] Get:24 http://ftpmaster.internal/ubuntu/ precise/main libglib2.0-0 armel 2.31.16-0ubuntu2 [1018 kB] Get:25 http://ftpmaster.internal/ubuntu/ precise/main libudev0 armel 175-0ubuntu4 [26.7 kB] Get:26 http://ftpmaster.internal/ubuntu/ precise/main libsasl2-2 armel 2.1.25.dfsg1-3 [55.9 kB] Get:27 http://ftpmaster.internal/ubuntu/ precise/main apt armel 0.8.16~exp12ubuntu4 [1040 kB] Get:28 http://ftpmaster.internal/ubuntu/ precise/main libpam-runtime all 1.1.3-7ubuntu2 [40.4 kB] Get:29 http://ftpmaster.internal/ubuntu/ precise/main multiarch-support armel 2.15-0ubuntu2 [4478 B] Get:30 http://ftpmaster.internal/ubuntu/ precise/main passwd armel 1:4.1.4.2+svn3283-3ubuntu4 [806 kB] Get:31 http://ftpmaster.internal/ubuntu/ precise/main netbase all 4.47ubuntu1 [15.0 kB] Get:32 http://ftpmaster.internal/ubuntu/ precise/main ifupdown armel 0.7~beta2ubuntu4 [44.8 kB] Get:33 http://ftpmaster.internal/ubuntu/ precise/main udev armel 175-0ubuntu4 [282 kB] Get:34 http://ftpmaster.internal/ubuntu/ precise/main apt-transport-https armel 0.8.16~exp12ubuntu4 [15.2 kB] Get:35 http://ftpmaster.internal/ubuntu/ precise/main openssl armel 1.0.0g-1ubuntu1 [507 kB] Get:36 http://ftpmaster.internal/ubuntu/ precise/main ca-certificates all 20111211 [169 kB] Get:37 http://ftpmaster.internal/ubuntu/ precise/main pkgbinarymangler all 115 [29.7 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 30.1 MB in 10s (2946 kB/s) (Reading database ... 14206 files and directories currently installed.) Preparing to replace gzip 1.4-1ubuntu1 (using .../gzip_1.4-1ubuntu2_armel.deb) ... Unpacking replacement gzip ... Setting up gzip (1.4-1ubuntu2) ... (Reading database ... 14206 files and directories currently installed.) Preparing to replace login 1:4.1.4.2+svn3283-3ubuntu3 (using .../login_1%3a4.1.4.2+svn3283-3ubuntu4_armel.deb) ... Unpacking replacement login ... Setting up login (1:4.1.4.2+svn3283-3ubuntu4) ... Installing new version of config file /etc/securetty ... (Reading database ... 14206 files and directories currently installed.) Preparing to replace libnih-dbus1 1.0.3-4ubuntu5 (using .../libnih-dbus1_1.0.3-4ubuntu8_armel.deb) ... Unpacking replacement libnih-dbus1 ... Preparing to replace libc-bin 2.13-24ubuntu4 (using .../libc-bin_2.15-0ubuntu2_armel.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.15-0ubuntu2) ... (Reading database ... 14207 files and directories currently installed.) Preparing to replace libc6-dev 2.13-24ubuntu4 (using .../libc6-dev_2.15-0ubuntu2_armel.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-dev-bin 2.13-24ubuntu4 (using .../libc-dev-bin_2.15-0ubuntu2_armel.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6 2.13-24ubuntu4 (using .../libc6_2.15-0ubuntu2_armel.deb) ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc6 (2.15-0ubuntu2) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14217 files and directories currently installed.) Preparing to replace libnih1 1.0.3-4ubuntu5 (using .../libnih1_1.0.3-4ubuntu8_armel.deb) ... Unpacking replacement libnih1 ... Preparing to replace linux-libc-dev 3.2.0-12.21 (using .../linux-libc-dev_3.2.0-16.25_armel.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libgomp1 4.6.2-12ubuntu1 (using .../libgomp1_4.6.2-14ubuntu1_armel.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.6-base 4.6.2-12ubuntu1 (using .../gcc-4.6-base_4.6.2-14ubuntu1_armel.deb) ... Unpacking replacement gcc-4.6-base ... Setting up gcc-4.6-base (4.6.2-14ubuntu1) ... (Reading database ... 14217 files and directories currently installed.) Preparing to replace libgcc1 1:4.6.2-12ubuntu1 (using .../libgcc1_1%3a4.6.2-14ubuntu1_armel.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.6.2-14ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14217 files and directories currently installed.) Preparing to replace cpp-4.6 4.6.2-12ubuntu1 (using .../cpp-4.6_4.6.2-14ubuntu1_armel.deb) ... Unpacking replacement cpp-4.6 ... Preparing to replace libstdc++6-4.6-dev 4.6.2-12ubuntu1 (using .../libstdc++6-4.6-dev_4.6.2-14ubuntu1_armel.deb) ... Unpacking replacement libstdc++6-4.6-dev ... Preparing to replace g++-4.6 4.6.2-12ubuntu1 (using .../g++-4.6_4.6.2-14ubuntu1_armel.deb) ... Unpacking replacement g++-4.6 ... Preparing to replace gcc-4.6 4.6.2-12ubuntu1 (using .../gcc-4.6_4.6.2-14ubuntu1_armel.deb) ... Unpacking replacement gcc-4.6 ... Preparing to replace libstdc++6 4.6.2-12ubuntu1 (using .../libstdc++6_4.6.2-14ubuntu1_armel.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.6.2-14ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14219 files and directories currently installed.) Preparing to replace libapt-pkg4.12 0.8.16~exp12ubuntu3 (using .../libapt-pkg4.12_0.8.16~exp12ubuntu4_armel.deb) ... Unpacking replacement libapt-pkg4.12 ... Setting up libapt-pkg4.12 (0.8.16~exp12ubuntu4) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14219 files and directories currently installed.) Preparing to replace debconf 1.5.41ubuntu1 (using .../debconf_1.5.41ubuntu2_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.41ubuntu2) ... (Reading database ... 14219 files and directories currently installed.) Preparing to replace libpam0g 1.1.3-7ubuntu1 (using .../libpam0g_1.1.3-7ubuntu2_armel.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.3-7ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14219 files and directories currently installed.) Preparing to replace libpam-modules-bin 1.1.3-7ubuntu1 (using .../libpam-modules-bin_1.1.3-7ubuntu2_armel.deb) ... Unpacking replacement libpam-modules-bin ... Setting up libpam-modules-bin (1.1.3-7ubuntu2) ... (Reading database ... 14219 files and directories currently installed.) Preparing to replace libpam-modules 1.1.3-7ubuntu1 (using .../libpam-modules_1.1.3-7ubuntu2_armel.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.3-7ubuntu2) ... (Reading database ... 14219 files and directories currently installed.) Preparing to replace libssl1.0.0 1.0.0e-3ubuntu1 (using .../libssl1.0.0_1.0.0g-1ubuntu1_armel.deb) ... Unpacking replacement libssl1.0.0 ... Setting up libssl1.0.0 (1.0.0g-1ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14219 files and directories currently installed.) Preparing to replace libglib2.0-0 2.31.14-0ubuntu1 (using .../libglib2.0-0_2.31.16-0ubuntu2_armel.deb) ... Unpacking replacement libglib2.0-0 ... Preparing to replace libudev0 175-0ubuntu3 (using .../libudev0_175-0ubuntu4_armel.deb) ... Unpacking replacement libudev0 ... Preparing to replace libsasl2-2 2.1.24~rc1.dfsg1+cvs2011-05-23-4ubuntu3 (using .../libsasl2-2_2.1.25.dfsg1-3_armel.deb) ... Unpacking replacement libsasl2-2 ... Preparing to replace apt 0.8.16~exp12ubuntu3 (using .../apt_0.8.16~exp12ubuntu4_armel.deb) ... Unpacking replacement apt ... Setting up apt (0.8.16~exp12ubuntu4) ... gpg: key 437D05B5: "Ubuntu Archive Automatic Signing Key " not changed gpg: key FBB75451: "Ubuntu CD Image Automatic Signing Key " not changed gpg: Total number processed: 2 gpg: unchanged: 2 (Reading database ... 14219 files and directories currently installed.) Preparing to replace libpam-runtime 1.1.3-7ubuntu1 (using .../libpam-runtime_1.1.3-7ubuntu2_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.3-7ubuntu2) ... (Reading database ... 14219 files and directories currently installed.) Preparing to replace multiarch-support 2.13-24ubuntu4 (using .../multiarch-support_2.15-0ubuntu2_armel.deb) ... Unpacking replacement multiarch-support ... Setting up multiarch-support (2.15-0ubuntu2) ... (Reading database ... 14219 files and directories currently installed.) Preparing to replace passwd 1:4.1.4.2+svn3283-3ubuntu3 (using .../passwd_1%3a4.1.4.2+svn3283-3ubuntu4_armel.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.4.2+svn3283-3ubuntu4) ... (Reading database ... 14219 files and directories currently installed.) Preparing to replace netbase 4.46ubuntu1 (using .../netbase_4.47ubuntu1_all.deb) ... Unpacking replacement netbase ... Preparing to replace ifupdown 0.7~beta2ubuntu3 (using .../ifupdown_0.7~beta2ubuntu4_armel.deb) ... Unpacking replacement ifupdown ... Preparing to replace udev 175-0ubuntu3 (using .../udev_175-0ubuntu4_armel.deb) ... Adding 'diversion of /sbin/udevadm to /sbin/udevadm.upgrade by fake-udev' Unpacking replacement udev ... Preparing to replace apt-transport-https 0.8.16~exp12ubuntu3 (using .../apt-transport-https_0.8.16~exp12ubuntu4_armel.deb) ... Unpacking replacement apt-transport-https ... Preparing to replace openssl 1.0.0e-3ubuntu1 (using .../openssl_1.0.0g-1ubuntu1_armel.deb) ... Unpacking replacement openssl ... Preparing to replace ca-certificates 20110502+nmu1ubuntu5 (using .../ca-certificates_20111211_all.deb) ... Unpacking replacement ca-certificates ... Preparing to replace pkgbinarymangler 114 (using .../pkgbinarymangler_115_all.deb) ... Unpacking replacement pkgbinarymangler ... Setting up libnih1 (1.0.3-4ubuntu8) ... Setting up libnih-dbus1 (1.0.3-4ubuntu8) ... Setting up libc-dev-bin (2.15-0ubuntu2) ... Setting up linux-libc-dev (3.2.0-16.25) ... Setting up libc6-dev (2.15-0ubuntu2) ... Setting up libgomp1 (4.6.2-14ubuntu1) ... Setting up cpp-4.6 (4.6.2-14ubuntu1) ... Setting up gcc-4.6 (4.6.2-14ubuntu1) ... Setting up libglib2.0-0 (2.31.16-0ubuntu2) ... No schema files found: doing nothing. Setting up libudev0 (175-0ubuntu4) ... Setting up libsasl2-2 (2.1.25.dfsg1-3) ... Setting up netbase (4.47ubuntu1) ... Installing new version of config file /etc/services ... Setting up ifupdown (0.7~beta2ubuntu4) ... Setting up udev (175-0ubuntu4) ... invoke-rc.d: policy-rc.d denied execution of restart. Removing 'diversion of /sbin/udevadm to /sbin/udevadm.upgrade by fake-udev' update-initramfs: deferring update (trigger activated) Setting up apt-transport-https (0.8.16~exp12ubuntu4) ... Setting up openssl (1.0.0g-1ubuntu1) ... Installing new version of config file /etc/ssl/openssl.cnf ... Setting up ca-certificates (20111211) ... Clearing symlinks in /etc/ssl/certs...done. Updating certificates in /etc/ssl/certs... 152 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d....done. Setting up pkgbinarymangler (115) ... Setting up libstdc++6-4.6-dev (4.6.2-14ubuntu1) ... Setting up g++-4.6 (4.6.2-14ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Processing triggers for initramfs-tools ... RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '32d626e9295645230b8c0e7e4887e91c8486687c', 'armel', 'precise', '--nolog', '--batch', '--archive=ubuntu', '--dist=precise', '--purpose=PRIMARY', '--architecture=armel', '--comp=universe', 'yubico-pam_2.11-1.dsc'] Initiating build 32d626e9295645230b8c0e7e4887e91c8486687c with 0 processor cores. Automatic build of yubico-pam_2.11-1 on buttercup by sbuild/armel 1.170.5 Build started at 20120215-1636 ****************************************************************************** yubico-pam_2.11-1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 8), po-debconf, pkg-config, cdbs, libykclient-dev (>= 2.4), libpam0g-dev, libldap2-dev, libykpers-1-dev (>= 1.5.2), libyubikey-dev Checking for already installed source dependencies... debhelper: missing po-debconf: missing pkg-config: missing cdbs: missing libykclient-dev: missing libpam0g-dev: missing libldap2-dev: missing libykpers-1-dev: missing libyubikey-dev: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper po-debconf pkg-config cdbs libykclient-dev libpam0g-dev libldap2-dev libykpers-1-dev libyubikey-dev Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf automake autotools-dev bsdmainutils dh-translations file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libencode-locale-perl libexpat1 libfile-listing-perl libgettextpo0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libio-socket-ssl-perl liblwp-mediatypes-perl liblwp-protocol-https-perl libmagic1 libnet-http-perl libnet-ssleay-perl libpipeline1 libpopt0 libunistring0 liburi-perl libusb-1.0-0 libwww-perl libwww-robotrules-perl libxml-parser-perl libxml2 libykclient3 libykpers-1-1 libyubikey0 m4 man-db mime-support python python-scour python2.7 Suggested packages: autoconf2.13 autoconf-archive gnu-standards autoconf-doc libtool wamerican wordlist whois vacation devscripts dh-make gettext-doc groff libdata-dump-perl libcrypt-ssleay-perl libauthen-ntlm-perl less www-browser libmail-box-perl python-doc python-tk python-rsvg python-cairo python2.7-doc Recommended packages: curl wget lynx-cur libio-socket-inet6-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl xml-core libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils cdbs debhelper dh-translations file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libencode-locale-perl libexpat1 libfile-listing-perl libgettextpo0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libio-socket-ssl-perl libldap2-dev liblwp-mediatypes-perl liblwp-protocol-https-perl libmagic1 libnet-http-perl libnet-ssleay-perl libpam0g-dev libpipeline1 libpopt0 libunistring0 liburi-perl libusb-1.0-0 libwww-perl libwww-robotrules-perl libxml-parser-perl libxml2 libykclient-dev libykclient3 libykpers-1-1 libykpers-1-dev libyubikey-dev libyubikey0 m4 man-db mime-support pkg-config po-debconf python python-scour python2.7 0 upgraded, 57 newly installed, 0 to remove and 0 not upgraded. Need to get 11.7 MB of archives. After this operation, 36.4 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libexpat1 libpopt0 libpipeline1 libusb-1.0-0 libxml2 libcroco3 libunistring0 libgettextpo0 libyubikey0 libykpers-1-1 libmagic1 file mime-support python2.7 python bsdmainutils gettext-base groff-base man-db m4 autoconf autotools-dev automake html2text gettext intltool-debian po-debconf debhelper liburi-perl libencode-locale-perl libhttp-date-perl libfile-listing-perl libhtml-tagset-perl libhtml-parser-perl libhtml-tree-perl liblwp-mediatypes-perl libhttp-message-perl libhttp-cookies-perl libhttp-negotiate-perl libnet-http-perl libnet-ssleay-perl libio-socket-ssl-perl liblwp-protocol-https-perl libwww-robotrules-perl libwww-perl libxml-parser-perl intltool dh-translations python-scour cdbs libpam0g-dev libykclient3 libykclient-dev libyubikey-dev pkg-config libldap2-dev libykpers-1-dev Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ precise/main libexpat1 armel 2.0.1-7.2 [102 kB] Get:2 http://ftpmaster.internal/ubuntu/ precise/main libpopt0 armel 1.16-3ubuntu1 [26.0 kB] Get:3 http://ftpmaster.internal/ubuntu/ precise/main libpipeline1 armel 1.2.0-5 [20.7 kB] Get:4 http://ftpmaster.internal/ubuntu/ precise/main libusb-1.0-0 armel 2:1.0.9~rc3-2 [25.3 kB] Get:5 http://ftpmaster.internal/ubuntu/ precise/main libxml2 armel 2.7.8.dfsg-5.1ubuntu3 [548 kB] Get:6 http://ftpmaster.internal/ubuntu/ precise/main libcroco3 armel 0.6.4-2 [82.2 kB] Get:7 http://ftpmaster.internal/ubuntu/ precise/main libunistring0 armel 0.9.3-5 [394 kB] Get:8 http://ftpmaster.internal/ubuntu/ precise/main libgettextpo0 armel 0.18.1.1-5ubuntu3 [99.4 kB] Get:9 http://ftpmaster.internal/ubuntu/ precise/universe libyubikey0 armel 1.7-1 [6780 B] Get:10 http://ftpmaster.internal/ubuntu/ precise/universe libykpers-1-1 armel 1.6.3-1 [20.1 kB] Get:11 http://ftpmaster.internal/ubuntu/ precise/main libmagic1 armel 5.09-2 [213 kB] Get:12 http://ftpmaster.internal/ubuntu/ precise/main file armel 5.09-2 [18.9 kB] Get:13 http://ftpmaster.internal/ubuntu/ precise/main mime-support all 3.51-1ubuntu1 [30.7 kB] Get:14 http://ftpmaster.internal/ubuntu/ precise/main python2.7 armel 2.7.2-13ubuntu4 [2584 kB] Get:15 http://ftpmaster.internal/ubuntu/ precise/main python all 2.7.2-9ubuntu2 [168 kB] Get:16 http://ftpmaster.internal/ubuntu/ precise/main bsdmainutils armel 8.2.3 [194 kB] Get:17 http://ftpmaster.internal/ubuntu/ precise/main gettext-base armel 0.18.1.1-5ubuntu3 [54.7 kB] Get:18 http://ftpmaster.internal/ubuntu/ precise/main groff-base armel 1.21-6 [934 kB] Get:19 http://ftpmaster.internal/ubuntu/ precise/main man-db armel 2.6.1-1 [697 kB] Get:20 http://ftpmaster.internal/ubuntu/ precise/main m4 armel 1.4.16-2ubuntu1 [182 kB] Get:21 http://ftpmaster.internal/ubuntu/ precise/main autoconf all 2.68-1ubuntu2 [560 kB] Get:22 http://ftpmaster.internal/ubuntu/ precise/main autotools-dev all 20120210.1 [42.3 kB] Get:23 http://ftpmaster.internal/ubuntu/ precise/main automake all 1:1.11.3-1 [571 kB] Get:24 http://ftpmaster.internal/ubuntu/ precise/main html2text armel 1.3.2a-15 [94.3 kB] Get:25 http://ftpmaster.internal/ubuntu/ precise/main gettext armel 0.18.1.1-5ubuntu3 [1050 kB] Get:26 http://ftpmaster.internal/ubuntu/ precise/main intltool-debian all 0.35.0+20060710.1 [31.6 kB] Get:27 http://ftpmaster.internal/ubuntu/ precise/main po-debconf all 1.0.16+nmu2ubuntu1 [210 kB] Get:28 http://ftpmaster.internal/ubuntu/ precise/main debhelper all 9.20120115ubuntu2 [618 kB] Get:29 http://ftpmaster.internal/ubuntu/ precise/main liburi-perl all 1.59-1 [90.3 kB] Get:30 http://ftpmaster.internal/ubuntu/ precise/main libencode-locale-perl all 1.02-2 [12.0 kB] Get:31 http://ftpmaster.internal/ubuntu/ precise/main libhttp-date-perl all 6.00-1 [10.1 kB] Get:32 http://ftpmaster.internal/ubuntu/ precise/main libfile-listing-perl all 6.03-1 [9690 B] Get:33 http://ftpmaster.internal/ubuntu/ precise/main libhtml-tagset-perl all 3.20-2 [13.5 kB] Get:34 http://ftpmaster.internal/ubuntu/ precise/main libhtml-parser-perl armel 3.69-1build1 [95.8 kB] Get:35 http://ftpmaster.internal/ubuntu/ precise/main libhtml-tree-perl all 4.2-1 [205 kB] Get:36 http://ftpmaster.internal/ubuntu/ precise/main liblwp-mediatypes-perl all 6.01-1 [17.5 kB] Get:37 http://ftpmaster.internal/ubuntu/ precise/main libhttp-message-perl all 6.01-1 [77.6 kB] Get:38 http://ftpmaster.internal/ubuntu/ precise/main libhttp-cookies-perl all 6.00-2 [23.3 kB] Get:39 http://ftpmaster.internal/ubuntu/ precise/main libhttp-negotiate-perl all 6.00-2 [13.4 kB] Get:40 http://ftpmaster.internal/ubuntu/ precise/main libnet-http-perl all 6.02-1 [23.5 kB] Get:41 http://ftpmaster.internal/ubuntu/ precise/main libnet-ssleay-perl armel 1.42-1build1 [175 kB] Get:42 http://ftpmaster.internal/ubuntu/ precise/main libio-socket-ssl-perl all 1.53-1 [47.5 kB] Get:43 http://ftpmaster.internal/ubuntu/ precise/main liblwp-protocol-https-perl all 6.02-1 [6746 B] Get:44 http://ftpmaster.internal/ubuntu/ precise/main libwww-robotrules-perl all 6.01-1 [14.1 kB] Get:45 http://ftpmaster.internal/ubuntu/ precise/main libwww-perl all 6.03-1 [156 kB] Get:46 http://ftpmaster.internal/ubuntu/ precise/main libxml-parser-perl armel 2.41-1build1 [304 kB] Get:47 http://ftpmaster.internal/ubuntu/ precise/main intltool all 0.50.1-1 [51.3 kB] Get:48 http://ftpmaster.internal/ubuntu/ precise/main dh-translations all 115 [21.6 kB] Get:49 http://ftpmaster.internal/ubuntu/ precise/main python-scour all 0.26-3 [46.5 kB] Get:50 http://ftpmaster.internal/ubuntu/ precise/main cdbs all 0.4.100ubuntu2 [47.6 kB] Get:51 http://ftpmaster.internal/ubuntu/ precise/main libpam0g-dev armel 1.1.3-7ubuntu2 [112 kB] Get:52 http://ftpmaster.internal/ubuntu/ precise/universe libykclient3 armel 2.6-1 [17.1 kB] Get:53 http://ftpmaster.internal/ubuntu/ precise/universe libykclient-dev armel 2.6-1 [19.8 kB] Get:54 http://ftpmaster.internal/ubuntu/ precise/universe libyubikey-dev armel 1.7-1 [12.3 kB] Get:55 http://ftpmaster.internal/ubuntu/ precise/main pkg-config armel 0.26-1ubuntu1 [38.0 kB] Get:56 http://ftpmaster.internal/ubuntu/ precise/main libldap2-dev armel 2.4.28-1.1ubuntu2 [461 kB] Get:57 http://ftpmaster.internal/ubuntu/ precise/universe libykpers-1-dev armel 1.6.3-1 [25.8 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 11.7 MB in 4s (2664 kB/s) Selecting previously unselected package libexpat1. (Reading database ... 14215 files and directories currently installed.) Unpacking libexpat1 (from .../libexpat1_2.0.1-7.2_armel.deb) ... Selecting previously unselected package libpopt0. Unpacking libpopt0 (from .../libpopt0_1.16-3ubuntu1_armel.deb) ... Selecting previously unselected package libpipeline1. Unpacking libpipeline1 (from .../libpipeline1_1.2.0-5_armel.deb) ... Selecting previously unselected package libusb-1.0-0. Unpacking libusb-1.0-0 (from .../libusb-1.0-0_2%3a1.0.9~rc3-2_armel.deb) ... Selecting previously unselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.8.dfsg-5.1ubuntu3_armel.deb) ... Selecting previously unselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.4-2_armel.deb) ... Selecting previously unselected package libunistring0. Unpacking libunistring0 (from .../libunistring0_0.9.3-5_armel.deb) ... Selecting previously unselected package libgettextpo0. Unpacking libgettextpo0 (from .../libgettextpo0_0.18.1.1-5ubuntu3_armel.deb) ... Selecting previously unselected package libyubikey0. Unpacking libyubikey0 (from .../libyubikey0_1.7-1_armel.deb) ... Selecting previously unselected package libykpers-1-1. Unpacking libykpers-1-1 (from .../libykpers-1-1_1.6.3-1_armel.deb) ... Selecting previously unselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_5.09-2_armel.deb) ... Selecting previously unselected package file. Unpacking file (from .../archives/file_5.09-2_armel.deb) ... Selecting previously unselected package mime-support. Unpacking mime-support (from .../mime-support_3.51-1ubuntu1_all.deb) ... Selecting previously unselected package python2.7. Unpacking python2.7 (from .../python2.7_2.7.2-13ubuntu4_armel.deb) ... Selecting previously unselected package python. Unpacking python (from .../python_2.7.2-9ubuntu2_all.deb) ... Selecting previously unselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.2.3_armel.deb) ... Selecting previously unselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.18.1.1-5ubuntu3_armel.deb) ... Selecting previously unselected package groff-base. Unpacking groff-base (from .../groff-base_1.21-6_armel.deb) ... Selecting previously unselected package man-db. Unpacking man-db (from .../man-db_2.6.1-1_armel.deb) ... Selecting previously unselected package m4. Unpacking m4 (from .../m4_1.4.16-2ubuntu1_armel.deb) ... Selecting previously unselected package autoconf. Unpacking autoconf (from .../autoconf_2.68-1ubuntu2_all.deb) ... Selecting previously unselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20120210.1_all.deb) ... Selecting previously unselected package automake. Unpacking automake (from .../automake_1%3a1.11.3-1_all.deb) ... Selecting previously unselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-15_armel.deb) ... Selecting previously unselected package gettext. Unpacking gettext (from .../gettext_0.18.1.1-5ubuntu3_armel.deb) ... Selecting previously unselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously unselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16+nmu2ubuntu1_all.deb) ... Selecting previously unselected package debhelper. Unpacking debhelper (from .../debhelper_9.20120115ubuntu2_all.deb) ... Selecting previously unselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.59-1_all.deb) ... Selecting previously unselected package libencode-locale-perl. Unpacking libencode-locale-perl (from .../libencode-locale-perl_1.02-2_all.deb) ... Selecting previously unselected package libhttp-date-perl. Unpacking libhttp-date-perl (from .../libhttp-date-perl_6.00-1_all.deb) ... Selecting previously unselected package libfile-listing-perl. Unpacking libfile-listing-perl (from .../libfile-listing-perl_6.03-1_all.deb) ... Selecting previously unselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously unselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.69-1build1_armel.deb) ... Selecting previously unselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_4.2-1_all.deb) ... Selecting previously unselected package liblwp-mediatypes-perl. Unpacking liblwp-mediatypes-perl (from .../liblwp-mediatypes-perl_6.01-1_all.deb) ... Selecting previously unselected package libhttp-message-perl. Unpacking libhttp-message-perl (from .../libhttp-message-perl_6.01-1_all.deb) ... Selecting previously unselected package libhttp-cookies-perl. Unpacking libhttp-cookies-perl (from .../libhttp-cookies-perl_6.00-2_all.deb) ... Selecting previously unselected package libhttp-negotiate-perl. Unpacking libhttp-negotiate-perl (from .../libhttp-negotiate-perl_6.00-2_all.deb) ... Selecting previously unselected package libnet-http-perl. Unpacking libnet-http-perl (from .../libnet-http-perl_6.02-1_all.deb) ... Selecting previously unselected package libnet-ssleay-perl. Unpacking libnet-ssleay-perl (from .../libnet-ssleay-perl_1.42-1build1_armel.deb) ... Selecting previously unselected package libio-socket-ssl-perl. Unpacking libio-socket-ssl-perl (from .../libio-socket-ssl-perl_1.53-1_all.deb) ... Selecting previously unselected package liblwp-protocol-https-perl. Unpacking liblwp-protocol-https-perl (from .../liblwp-protocol-https-perl_6.02-1_all.deb) ... Selecting previously unselected package libwww-robotrules-perl. Unpacking libwww-robotrules-perl (from .../libwww-robotrules-perl_6.01-1_all.deb) ... Selecting previously unselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_6.03-1_all.deb) ... Selecting previously unselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.41-1build1_armel.deb) ... Selecting previously unselected package intltool. Unpacking intltool (from .../intltool_0.50.1-1_all.deb) ... Selecting previously unselected package dh-translations. Unpacking dh-translations (from .../dh-translations_115_all.deb) ... Selecting previously unselected package python-scour. Unpacking python-scour (from .../python-scour_0.26-3_all.deb) ... Selecting previously unselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.100ubuntu2_all.deb) ... Selecting previously unselected package libpam0g-dev. Unpacking libpam0g-dev (from .../libpam0g-dev_1.1.3-7ubuntu2_armel.deb) ... Selecting previously unselected package libykclient3. Unpacking libykclient3 (from .../libykclient3_2.6-1_armel.deb) ... Selecting previously unselected package libykclient-dev. Unpacking libykclient-dev (from .../libykclient-dev_2.6-1_armel.deb) ... Selecting previously unselected package libyubikey-dev. Unpacking libyubikey-dev (from .../libyubikey-dev_1.7-1_armel.deb) ... Selecting previously unselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.26-1ubuntu1_armel.deb) ... Selecting previously unselected package libldap2-dev. Unpacking libldap2-dev (from .../libldap2-dev_2.4.28-1.1ubuntu2_armel.deb) ... Selecting previously unselected package libykpers-1-dev. Unpacking libykpers-1-dev (from .../libykpers-1-dev_1.6.3-1_armel.deb) ... Setting up libexpat1 (2.0.1-7.2) ... Setting up libpopt0 (1.16-3ubuntu1) ... Setting up libpipeline1 (1.2.0-5) ... Setting up libusb-1.0-0 (2:1.0.9~rc3-2) ... Setting up libxml2 (2.7.8.dfsg-5.1ubuntu3) ... Setting up libcroco3 (0.6.4-2) ... Setting up libunistring0 (0.9.3-5) ... Setting up libgettextpo0 (0.18.1.1-5ubuntu3) ... Setting up libyubikey0 (1.7-1) ... Setting up libykpers-1-1 (1.6.3-1) ... Setting up libmagic1 (5.09-2) ... Setting up file (5.09-2) ... Setting up mime-support (3.51-1ubuntu1) ... update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode. Setting up python2.7 (2.7.2-13ubuntu4) ... Setting up python (2.7.2-9ubuntu2) ... Setting up bsdmainutils (8.2.3) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode. Setting up gettext-base (0.18.1.1-5ubuntu3) ... Setting up groff-base (1.21-6) ... Setting up man-db (2.6.1-1) ... Building database of manual pages ... Setting up m4 (1.4.16-2ubuntu1) ... Setting up autoconf (2.68-1ubuntu2) ... Setting up autotools-dev (20120210.1) ... Setting up automake (1:1.11.3-1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode. Setting up html2text (1.3.2a-15) ... Setting up gettext (0.18.1.1-5ubuntu3) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16+nmu2ubuntu1) ... Setting up debhelper (9.20120115ubuntu2) ... Setting up liburi-perl (1.59-1) ... Setting up libencode-locale-perl (1.02-2) ... Setting up libhttp-date-perl (6.00-1) ... Setting up libfile-listing-perl (6.03-1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up libhtml-parser-perl (3.69-1build1) ... Setting up libhtml-tree-perl (4.2-1) ... Setting up liblwp-mediatypes-perl (6.01-1) ... Setting up libhttp-message-perl (6.01-1) ... Setting up libhttp-cookies-perl (6.00-2) ... Setting up libhttp-negotiate-perl (6.00-2) ... Setting up libnet-http-perl (6.02-1) ... Setting up libnet-ssleay-perl (1.42-1build1) ... Setting up libio-socket-ssl-perl (1.53-1) ... Setting up libwww-robotrules-perl (6.01-1) ... Setting up python-scour (0.26-3) ... Setting up libpam0g-dev (1.1.3-7ubuntu2) ... Setting up libykclient3 (2.6-1) ... Setting up libykclient-dev (2.6-1) ... Setting up libyubikey-dev (1.7-1) ... Setting up pkg-config (0.26-1ubuntu1) ... Setting up libldap2-dev (2.4.28-1.1ubuntu2) ... Setting up libykpers-1-dev (1.6.3-1) ... Setting up liblwp-protocol-https-perl (6.02-1) ... Setting up libwww-perl (6.03-1) ... Setting up libxml-parser-perl (2.41-1build1) ... Setting up intltool (0.50.1-1) ... Setting up dh-translations (115) ... Setting up cdbs (0.4.100ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.15-0ubuntu2 make_3.81-8.1ubuntu1 dpkg-dev_1.16.1.2ubuntu5 gcc-4.6_4.6.2-14ubuntu1 g++-4.6_4.6.2-14ubuntu1 binutils_2.22-5ubuntu1 libstdc++6-4.6-dev_4.6.2-14ubuntu1 libstdc++6_4.6.2-14ubuntu1 ------------------------------------------------------------------------------ dpkg-source: warning: -sn is not a valid option for Dpkg::Source::Package::V3::quilt gpgv: Signature made Fri Feb 10 14:58:26 2012 UTC using RSA key ID B565716F gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./yubico-pam_2.11-1.dsc dpkg-source: info: extracting yubico-pam in yubico-pam-2.11 dpkg-source: info: unpacking yubico-pam_2.11.orig.tar.gz dpkg-source: info: unpacking yubico-pam_2.11-1.debian.tar.gz dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): -D_FORTIFY_SOURCE=2 dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions -Wl,-z,relro dpkg-buildpackage: source package yubico-pam dpkg-buildpackage: source version 2.11-1 dpkg-source --before-build yubico-pam-2.11 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean test -x debian/rules dh_testroot rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . -k distclean make[1]: Entering directory `/build/buildd/yubico-pam-2.11' make[1]: *** No rule to make target `distclean'. make[1]: Leaving directory `/build/buildd/yubico-pam-2.11' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-check rm -f debian/stamp-autotools rmdir --ignore-fail-on-non-empty . rmdir: failed to remove `.': Invalid argument make: [makefile-clean] Error 1 (ignored) for i in ./build-aux/config.guess ./build-aux/config.sub ./build-aux/config.rpath ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done dh_clean rm -f debian/stamp-autotools-files debian/rules build test -x debian/rules mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./build-aux/config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./build-aux/config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi if test -e /usr/share/gnulib/build-aux/config.rpath ; then \ for i in ./build-aux/config.rpath ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/gnulib/build-aux/config.rpath $i ; \ fi ; \ done ; \ fi touch debian/stamp-autotools-files chmod a+x /build/buildd/yubico-pam-2.11/./configure mkdir -p . cd . && CFLAGS="-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security" CXXFLAGS="-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall" CPPFLAGS="-D_FORTIFY_SOURCE=2" LDFLAGS="-Wl,-Bsymbolic-functions -Wl,-z,relro" /build/buildd/yubico-pam-2.11/./configure --build=arm-linux-gnueabi --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/yubico-pam" --srcdir=. --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules --with-pam-dir=/lib/security --includedir=/usr/include/libpam-yubico configure: WARNING: unrecognized options: --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... none checking whether gcc and cc understand -c and -o together... yes checking build system type... arm-unknown-linux-gnueabi checking host system type... arm-unknown-linux-gnueabi checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 805306365 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert arm-unknown-linux-gnueabi file names to arm-unknown-linux-gnueabi format... func_convert_file_noop checking how to convert arm-unknown-linux-gnueabi file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking security/pam_appl.h usability... yes checking security/pam_appl.h presence... yes checking for security/pam_appl.h... yes checking for security/pam_modules.h... yes checking for security/_pam_macros.h... yes checking for security/pam_modutil.h... yes checking for pam_start in -lpam... yes checking for ldap_init in -lldap... yes checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for libykclient... yes checking how to link with libykclient... /usr/lib/libykclient.so checking for libyubikey... yes checking how to link with libyubikey... /usr/lib/libyubikey.so checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for YKPERS... yes checking for pam_modutil_drop_priv... yes configure: PAM installation path /lib/security configure: creating ./config.status config.status: creating Makefile config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-maintainer-mode touch debian/stamp-autotools /usr/bin/make -C . make[1]: Entering directory `/build/buildd/yubico-pam-2.11' \ # source='pam_yubico.c' object='pam_yubico_la-pam_yubico.lo' libtool=yes /bin/bash ./libtool --tag=CC --mode=compile gcc -DDEBUG_PAM -DPAM_DEBUG -DPACKAGE_NAME=\"pam_yubico\" -DPACKAGE_TARNAME=\"pam_yubico\" -DPACKAGE_VERSION=\"2.11\" -DPACKAGE_STRING=\"pam_yubico\ 2.11\" -DPACKAGE_BUGREPORT=\"yubico-devel@googlegroups.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"pam_yubico\" -DVERSION=\"2.11\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SECURITY_PAM_APPL_H=1 -DHAVE_SECURITY_PAM_MODULES_H=1 -DHAVE_SECURITY__PAM_MACROS_H=1 -DHAVE_SECURITY_PAM_MODUTIL_H=1 -DHAVE_LIBPAM=1 -DHAVE_LIBLDAP=1 -DHAVE_LIBYKCLIENT=1 -DHAVE_LIBYUBIKEY=1 -DHAVE_CR=1 -DHAVE_PAM_MODUTIL_DROP_PRIV=1 -I. -I/usr/include/ykpers-1 -D_FORTIFY_SOURCE=2 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -c -o pam_yubico_la-pam_yubico.lo `test -f 'pam_yubico.c' || echo './'`pam_yubico.c libtool: compile: gcc -DDEBUG_PAM -DPAM_DEBUG -DPACKAGE_NAME=\"pam_yubico\" -DPACKAGE_TARNAME=\"pam_yubico\" -DPACKAGE_VERSION=\"2.11\" "-DPACKAGE_STRING=\"pam_yubico 2.11\"" -DPACKAGE_BUGREPORT=\"yubico-devel@googlegroups.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"pam_yubico\" -DVERSION=\"2.11\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SECURITY_PAM_APPL_H=1 -DHAVE_SECURITY_PAM_MODULES_H=1 -DHAVE_SECURITY__PAM_MACROS_H=1 -DHAVE_SECURITY_PAM_MODUTIL_H=1 -DHAVE_LIBPAM=1 -DHAVE_LIBLDAP=1 -DHAVE_LIBYKCLIENT=1 -DHAVE_LIBYUBIKEY=1 -DHAVE_CR=1 -DHAVE_PAM_MODUTIL_DROP_PRIV=1 -I. -I/usr/include/ykpers-1 -D_FORTIFY_SOURCE=2 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -c pam_yubico.c -fPIC -DPIC -o .libs/pam_yubico_la-pam_yubico.o \ # source='util.c' object='pam_yubico_la-util.lo' libtool=yes /bin/bash ./libtool --tag=CC --mode=compile gcc -DDEBUG_PAM -DPAM_DEBUG -DPACKAGE_NAME=\"pam_yubico\" -DPACKAGE_TARNAME=\"pam_yubico\" -DPACKAGE_VERSION=\"2.11\" -DPACKAGE_STRING=\"pam_yubico\ 2.11\" -DPACKAGE_BUGREPORT=\"yubico-devel@googlegroups.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"pam_yubico\" -DVERSION=\"2.11\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SECURITY_PAM_APPL_H=1 -DHAVE_SECURITY_PAM_MODULES_H=1 -DHAVE_SECURITY__PAM_MACROS_H=1 -DHAVE_SECURITY_PAM_MODUTIL_H=1 -DHAVE_LIBPAM=1 -DHAVE_LIBLDAP=1 -DHAVE_LIBYKCLIENT=1 -DHAVE_LIBYUBIKEY=1 -DHAVE_CR=1 -DHAVE_PAM_MODUTIL_DROP_PRIV=1 -I. -I/usr/include/ykpers-1 -D_FORTIFY_SOURCE=2 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -c -o pam_yubico_la-util.lo `test -f 'util.c' || echo './'`util.c libtool: compile: gcc -DDEBUG_PAM -DPAM_DEBUG -DPACKAGE_NAME=\"pam_yubico\" -DPACKAGE_TARNAME=\"pam_yubico\" -DPACKAGE_VERSION=\"2.11\" "-DPACKAGE_STRING=\"pam_yubico 2.11\"" -DPACKAGE_BUGREPORT=\"yubico-devel@googlegroups.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"pam_yubico\" -DVERSION=\"2.11\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SECURITY_PAM_APPL_H=1 -DHAVE_SECURITY_PAM_MODULES_H=1 -DHAVE_SECURITY__PAM_MACROS_H=1 -DHAVE_SECURITY_PAM_MODUTIL_H=1 -DHAVE_LIBPAM=1 -DHAVE_LIBLDAP=1 -DHAVE_LIBYKCLIENT=1 -DHAVE_LIBYUBIKEY=1 -DHAVE_CR=1 -DHAVE_PAM_MODUTIL_DROP_PRIV=1 -I. -I/usr/include/ykpers-1 -D_FORTIFY_SOURCE=2 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -c util.c -fPIC -DPIC -o .libs/pam_yubico_la-util.o \ # source='drop_privs.c' object='pam_yubico_la-drop_privs.lo' libtool=yes /bin/bash ./libtool --tag=CC --mode=compile gcc -DDEBUG_PAM -DPAM_DEBUG -DPACKAGE_NAME=\"pam_yubico\" -DPACKAGE_TARNAME=\"pam_yubico\" -DPACKAGE_VERSION=\"2.11\" -DPACKAGE_STRING=\"pam_yubico\ 2.11\" -DPACKAGE_BUGREPORT=\"yubico-devel@googlegroups.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"pam_yubico\" -DVERSION=\"2.11\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SECURITY_PAM_APPL_H=1 -DHAVE_SECURITY_PAM_MODULES_H=1 -DHAVE_SECURITY__PAM_MACROS_H=1 -DHAVE_SECURITY_PAM_MODUTIL_H=1 -DHAVE_LIBPAM=1 -DHAVE_LIBLDAP=1 -DHAVE_LIBYKCLIENT=1 -DHAVE_LIBYUBIKEY=1 -DHAVE_CR=1 -DHAVE_PAM_MODUTIL_DROP_PRIV=1 -I. -I/usr/include/ykpers-1 -D_FORTIFY_SOURCE=2 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -c -o pam_yubico_la-drop_privs.lo `test -f 'drop_privs.c' || echo './'`drop_privs.c libtool: compile: gcc -DDEBUG_PAM -DPAM_DEBUG -DPACKAGE_NAME=\"pam_yubico\" -DPACKAGE_TARNAME=\"pam_yubico\" -DPACKAGE_VERSION=\"2.11\" "-DPACKAGE_STRING=\"pam_yubico 2.11\"" -DPACKAGE_BUGREPORT=\"yubico-devel@googlegroups.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"pam_yubico\" -DVERSION=\"2.11\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SECURITY_PAM_APPL_H=1 -DHAVE_SECURITY_PAM_MODULES_H=1 -DHAVE_SECURITY__PAM_MACROS_H=1 -DHAVE_SECURITY_PAM_MODUTIL_H=1 -DHAVE_LIBPAM=1 -DHAVE_LIBLDAP=1 -DHAVE_LIBYKCLIENT=1 -DHAVE_LIBYUBIKEY=1 -DHAVE_CR=1 -DHAVE_PAM_MODUTIL_DROP_PRIV=1 -I. -I/usr/include/ykpers-1 -D_FORTIFY_SOURCE=2 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -c drop_privs.c -fPIC -DPIC -o .libs/pam_yubico_la-drop_privs.o /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -module -avoid-version -Wl,-Bsymbolic-functions -Wl,-z,relro -o pam_yubico.la -rpath /lib/security pam_yubico_la-pam_yubico.lo pam_yubico_la-util.lo pam_yubico_la-drop_privs.lo -L/usr/lib -lykclient -lldap -llber -lykpers-1 -L/usr/lib -lyubikey -lpam -lpam libtool: link: gcc -shared -fPIC -DPIC .libs/pam_yubico_la-pam_yubico.o .libs/pam_yubico_la-util.o .libs/pam_yubico_la-drop_privs.o -L/usr/lib -lykclient -lldap -llber -lykpers-1 -lyubikey -lpam -O2 -O2 -Wl,-Bsymbolic-functions -Wl,-z -Wl,relro -Wl,-soname -Wl,pam_yubico.so -o .libs/pam_yubico.so libtool: link: ( cd ".libs" && rm -f "pam_yubico.la" && ln -s "../pam_yubico.la" "pam_yubico.la" ) \ # source='ykpamcfg.c' object='ykpamcfg-ykpamcfg.o' libtool=no gcc -DDEBUG_PAM -DPAM_DEBUG -DPACKAGE_NAME=\"pam_yubico\" -DPACKAGE_TARNAME=\"pam_yubico\" -DPACKAGE_VERSION=\"2.11\" -DPACKAGE_STRING=\"pam_yubico\ 2.11\" -DPACKAGE_BUGREPORT=\"yubico-devel@googlegroups.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"pam_yubico\" -DVERSION=\"2.11\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SECURITY_PAM_APPL_H=1 -DHAVE_SECURITY_PAM_MODULES_H=1 -DHAVE_SECURITY__PAM_MACROS_H=1 -DHAVE_SECURITY_PAM_MODUTIL_H=1 -DHAVE_LIBPAM=1 -DHAVE_LIBLDAP=1 -DHAVE_LIBYKCLIENT=1 -DHAVE_LIBYUBIKEY=1 -DHAVE_CR=1 -DHAVE_PAM_MODUTIL_DROP_PRIV=1 -I. -I/usr/include/ykpers-1 -D_FORTIFY_SOURCE=2 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -c -o ykpamcfg-ykpamcfg.o `test -f 'ykpamcfg.c' || echo './'`ykpamcfg.c \ # source='util.c' object='ykpamcfg-util.o' libtool=no gcc -DDEBUG_PAM -DPAM_DEBUG -DPACKAGE_NAME=\"pam_yubico\" -DPACKAGE_TARNAME=\"pam_yubico\" -DPACKAGE_VERSION=\"2.11\" -DPACKAGE_STRING=\"pam_yubico\ 2.11\" -DPACKAGE_BUGREPORT=\"yubico-devel@googlegroups.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"pam_yubico\" -DVERSION=\"2.11\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SECURITY_PAM_APPL_H=1 -DHAVE_SECURITY_PAM_MODULES_H=1 -DHAVE_SECURITY__PAM_MACROS_H=1 -DHAVE_SECURITY_PAM_MODUTIL_H=1 -DHAVE_LIBPAM=1 -DHAVE_LIBLDAP=1 -DHAVE_LIBYKCLIENT=1 -DHAVE_LIBYUBIKEY=1 -DHAVE_CR=1 -DHAVE_PAM_MODUTIL_DROP_PRIV=1 -I. -I/usr/include/ykpers-1 -D_FORTIFY_SOURCE=2 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -c -o ykpamcfg-util.o `test -f 'util.c' || echo './'`util.c /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -no-install -Wl,-Bsymbolic-functions -Wl,-z,relro -o ykpamcfg ykpamcfg-ykpamcfg.o ykpamcfg-util.o -L/usr/lib -lykclient -lykpers-1 -L/usr/lib -lyubikey -lpam libtool: link: gcc -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Wl,-Bsymbolic-functions -Wl,-z -Wl,relro -o ykpamcfg ykpamcfg-ykpamcfg.o ykpamcfg-util.o -L/usr/lib -lykclient -lykpers-1 -lyubikey -lpam make[1]: Leaving directory `/build/buildd/yubico-pam-2.11' touch debian/stamp-makefile-build /usr/bin/make -C . check make[1]: Entering directory `/build/buildd/yubico-pam-2.11' /usr/bin/make test make[2]: Entering directory `/build/buildd/yubico-pam-2.11' \ # source='test.c' object='test.o' libtool=no gcc -DDEBUG_PAM -DPAM_DEBUG -DPACKAGE_NAME=\"pam_yubico\" -DPACKAGE_TARNAME=\"pam_yubico\" -DPACKAGE_VERSION=\"2.11\" -DPACKAGE_STRING=\"pam_yubico\ 2.11\" -DPACKAGE_BUGREPORT=\"yubico-devel@googlegroups.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"pam_yubico\" -DVERSION=\"2.11\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SECURITY_PAM_APPL_H=1 -DHAVE_SECURITY_PAM_MODULES_H=1 -DHAVE_SECURITY__PAM_MACROS_H=1 -DHAVE_SECURITY_PAM_MODUTIL_H=1 -DHAVE_LIBPAM=1 -DHAVE_LIBLDAP=1 -DHAVE_LIBYKCLIENT=1 -DHAVE_LIBYUBIKEY=1 -DHAVE_CR=1 -DHAVE_PAM_MODUTIL_DROP_PRIV=1 -I. -D_FORTIFY_SOURCE=2 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -c test.c /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -no-install -Wl,-Bsymbolic-functions -Wl,-z,relro -o test test.o ./pam_yubico.la -lpam *** Warning: Linking the executable test against the loadable module *** pam_yubico.so is not portable! libtool: link: gcc -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Werror=format-security -Wall -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Wl,-Bsymbolic-functions -Wl,-z -Wl,relro -o test test.o ./.libs/pam_yubico.so -lpam -Wl,-rpath -Wl,/build/buildd/yubico-pam-2.11/.libs -Wl,-rpath -Wl,/lib/security make[2]: Leaving directory `/build/buildd/yubico-pam-2.11' /usr/bin/make check-TESTS make[2]: Entering directory `/build/buildd/yubico-pam-2.11' rc 4 PASS: test ============= 1 test passed ============= make[2]: Leaving directory `/build/buildd/yubico-pam-2.11' make[1]: Leaving directory `/build/buildd/yubico-pam-2.11' touch debian/stamp-makefile-check /usr/bin/fakeroot debian/rules binary-arch test -x debian/rules dh_testroot dh_prep dh_installdirs -A mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./build-aux/config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./build-aux/config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi if test -e /usr/share/gnulib/build-aux/config.rpath ; then \ for i in ./build-aux/config.rpath ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/gnulib/build-aux/config.rpath $i ; \ fi ; \ done ; \ fi /usr/bin/make -C . install DESTDIR=/build/buildd/yubico-pam-2.11/debian/libpam-yubico/ make[1]: Entering directory `/build/buildd/yubico-pam-2.11' make[2]: Entering directory `/build/buildd/yubico-pam-2.11' test -z "/lib/security" || /bin/mkdir -p "/build/buildd/yubico-pam-2.11/debian/libpam-yubico//lib/security" /bin/bash ./libtool --mode=install /usr/bin/install -c pam_yubico.la '/build/buildd/yubico-pam-2.11/debian/libpam-yubico//lib/security' libtool: install: /usr/bin/install -c .libs/pam_yubico.so /build/buildd/yubico-pam-2.11/debian/libpam-yubico//lib/security/pam_yubico.so libtool: install: /usr/bin/install -c .libs/pam_yubico.lai /build/buildd/yubico-pam-2.11/debian/libpam-yubico//lib/security/pam_yubico.la libtool: install: warning: remember to run `libtool --finish /lib/security' test -z "/usr/bin" || /bin/mkdir -p "/build/buildd/yubico-pam-2.11/debian/libpam-yubico//usr/bin" /bin/bash ./libtool --mode=install /usr/bin/install -c ykpamcfg '/build/buildd/yubico-pam-2.11/debian/libpam-yubico//usr/bin' libtool: install: /usr/bin/install -c ykpamcfg /build/buildd/yubico-pam-2.11/debian/libpam-yubico//usr/bin/ykpamcfg test -z "/usr/include/libpam-yubico" || /bin/mkdir -p "/build/buildd/yubico-pam-2.11/debian/libpam-yubico//usr/include/libpam-yubico" /usr/bin/install -c -m 644 util.h drop_privs.h '/build/buildd/yubico-pam-2.11/debian/libpam-yubico//usr/include/libpam-yubico' test -z "/usr/share/man/man1" || /bin/mkdir -p "/build/buildd/yubico-pam-2.11/debian/libpam-yubico//usr/share/man/man1" /usr/bin/install -c -m 644 ykpamcfg.1 '/build/buildd/yubico-pam-2.11/debian/libpam-yubico//usr/share/man/man1' make[2]: Leaving directory `/build/buildd/yubico-pam-2.11' make[1]: Leaving directory `/build/buildd/yubico-pam-2.11' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/libpam-yubico.substvars dh_installdirs -plibpam-yubico dh_installdocs -plibpam-yubico ./README ./NEWS ./AUTHORS dh_installexamples -plibpam-yubico dh_installman -plibpam-yubico dh_installinfo -plibpam-yubico dh_installmenu -plibpam-yubico dh_installcron -plibpam-yubico dh_installinit -plibpam-yubico dh_installdebconf -plibpam-yubico dh_installemacsen -plibpam-yubico dh_installcatalogs -plibpam-yubico dh_installpam -plibpam-yubico dh_installlogrotate -plibpam-yubico dh_installlogcheck -plibpam-yubico dh_installchangelogs -plibpam-yubico ./ChangeLog dh_installudev -plibpam-yubico dh_lintian -plibpam-yubico dh_bugfiles -plibpam-yubico dh_install -plibpam-yubico dh_link -plibpam-yubico dh_installmime -plibpam-yubico dh_installgsettings -plibpam-yubico mkdir /build/buildd/yubico-pam-2.11/debian/libpam-yubico/usr/share/pam-configs install -m 0644 debian/pam-auth-update /build/buildd/yubico-pam-2.11/debian/libpam-yubico/usr/share/libpam-yubico/pam-auth-update.template rm -f /build/buildd/yubico-pam-2.11/debian/libpam-yubico/lib/security/pam_yubico.la rm -rf /build/buildd/yubico-pam-2.11/debian/libpam-yubico/usr/include/libpam-yubico find /build/buildd/yubico-pam-2.11/debian/libpam-yubico -type d -empty -delete dh_strip -plibpam-yubico dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: libpam-yubico dh_strip debug symbol extraction: packages to act on: libpam-yubico dh_strip debug symbol extraction: ignored packages: dpkg-deb: building package `libpam-yubico-dbgsym' in `../libpam-yubico-dbgsym_2.11-1_armel.ddeb'. dh_compress -plibpam-yubico dh_fixperms -plibpam-yubico dh_makeshlibs -plibpam-yubico dh_installdeb -plibpam-yubico dh_perl -plibpam-yubico dh_shlibdeps -plibpam-yubico dh_gencontrol -plibpam-yubico # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibpam-yubico ; fi dh_md5sums -plibpam-yubico dh_builddeb -plibpam-yubico INFO: pkgstriptranslations version 115 pkgstriptranslations: processing libpam-yubico (in debian/libpam-yubico); do_strip: , oemstrip: pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libpam-yubico/DEBIAN/control, package libpam-yubico, directory debian/libpam-yubico .. removing usr/share/doc/libpam-yubico/changelog.gz pkgstripfiles: PNG optimization for package libpam-yubico took 0 s dpkg-deb: warning: 'debian/libpam-yubico/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `libpam-yubico' in `../libpam-yubico_2.11-1_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../yubico-pam_2.11-1_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-source --after-build yubico-pam-2.11 dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20120215-1643 Publishing debug debs. chroot-autobuild/build/buildd/libpam-yubico_2.11-1_armel.deb: new debian package, version 2.0. size 53452 bytes: control archive= 5520 bytes. 278 bytes, 15 lines * config #!/bin/sh 1158 bytes, 22 lines control 1498 bytes, 18 lines md5sums 407 bytes, 18 lines * postinst #!/bin/sh 523 bytes, 24 lines * postrm #!/bin/sh 99 bytes, 10 lines * prerm #!/bin/sh 8363 bytes, 76 lines templates Package: libpam-yubico Source: yubico-pam Version: 2.11-1 Architecture: armel Maintainer: Ubuntu Developers Original-Maintainer: Yubico Open Source Maintainers Installed-Size: 137 Depends: libpam-runtime (>= 1.0.1-6~), libykclient3 (>= 2.4), libldap-2.4-2 (>= 2.4.7), libykpers-1-1 (>= 1.5.2), debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.7), libpam0g (>= 1.1.3), libyubikey0 (>= 1.5) Section: admin Priority: optional Homepage: http://code.google.com/p/yubico-pam/ Description: two-factor password and YubiKey OTP PAM module This package provides the Yubico PAM module. It enables the use of two-factor authentication, with existing logins and passwords plus a YubiKey One-Time Password that is validated against an online validation service. The default is the free YubiCloud, but it is easy to set up a custom service. . A second mode of operation is available using the YubiKey's HMAC-SHA-1 Challenge-Response functionality. This allows for offline validation using a YubiKey, for example on a laptop computer. However, this only works for local logins, not for instance SSH logins. chroot-autobuild/build/buildd/libpam-yubico_2.11-1_armel.deb: drwxr-xr-x root/root 0 2012-02-15 16:42 ./ drwxr-xr-x root/root 0 2012-02-15 16:41 ./lib/ drwxr-xr-x root/root 0 2012-02-15 16:42 ./lib/security/ -rw-r--r-- root/root 26280 2012-02-15 16:42 ./lib/security/pam_yubico.so drwxr-xr-x root/root 0 2012-02-15 16:42 ./usr/ drwxr-xr-x root/root 0 2012-02-15 16:42 ./usr/share/ drwxr-xr-x root/root 0 2012-02-15 16:41 ./usr/share/doc/ drwxr-xr-x root/root 0 2012-02-15 16:43 ./usr/share/doc/libpam-yubico/ -rw-r--r-- root/root 2224 2011-12-13 10:26 ./usr/share/doc/libpam-yubico/copyright -rw-r--r-- root/root 1681 2011-12-14 12:02 ./usr/share/doc/libpam-yubico/YubikeyAndRadiusViaPAM.asciidoc -rw-r--r-- root/root 3525 2011-12-14 12:02 ./usr/share/doc/libpam-yubico/YubiKeyAndOpenVPNviaPAM.asciidoc.gz -rw-r--r-- root/root 3556 2012-02-10 14:30 ./usr/share/doc/libpam-yubico/ReadMe.asciidoc.gz -rw-r--r-- root/root 683 2012-02-10 14:52 ./usr/share/doc/libpam-yubico/changelog.Debian.gz -rw-r--r-- root/root 2996 2012-02-10 14:27 ./usr/share/doc/libpam-yubico/NEWS.gz -rw-r--r-- root/root 2422 2011-12-13 15:44 ./usr/share/doc/libpam-yubico/README.Debian -rw-r--r-- root/root 2721 2011-12-14 12:02 ./usr/share/doc/libpam-yubico/YubiKeyAndFreeRADIUSviaPAM.asciidoc.gz -rw-r--r-- root/root 2840 2011-12-14 12:02 ./usr/share/doc/libpam-yubico/YubiKeyAndFreeRADIUSwithsinglefactorauthenticationviaPAM.asciidoc.gz -rw-r--r-- root/root 1470 2011-12-14 12:02 ./usr/share/doc/libpam-yubico/TwoFactorPAMConfiguration.asciidoc -rw-r--r-- root/root 2302 2011-12-14 12:02 ./usr/share/doc/libpam-yubico/UbuntuFreeRadiusYubiKey.asciidoc.gz -rw-r--r-- root/root 2841 2011-12-14 12:02 ./usr/share/doc/libpam-yubico/YubikeyAndSSHViaPAM.asciidoc.gz -rw-r--r-- root/root 768 2011-12-12 09:53 ./usr/share/doc/libpam-yubico/AUTHORS -rw-r--r-- root/root 3556 2012-02-10 12:38 ./usr/share/doc/libpam-yubico/README.gz drwxr-xr-x root/root 0 2012-02-15 16:42 ./usr/share/libpam-yubico/ -rw-r--r-- root/root 188 2012-02-15 16:42 ./usr/share/libpam-yubico/pam-auth-update.template drwxr-xr-x root/root 0 2012-02-15 16:41 ./usr/share/man/ drwxr-xr-x root/root 0 2012-02-15 16:42 ./usr/share/man/man1/ -rw-r--r-- root/root 1996 2012-02-15 16:42 ./usr/share/man/man1/ykpamcfg.1.gz drwxr-xr-x root/root 0 2012-02-15 16:42 ./usr/bin/ -rwxr-xr-x root/root 13988 2012-02-15 16:42 ./usr/bin/ykpamcfg yubico-pam_2.11-1_armel.changes: Format: 1.8 Date: Fri, 10 Feb 2012 15:47:07 +0100 Source: yubico-pam Binary: libpam-yubico Architecture: armel Version: 2.11-1 Distribution: precise Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: Simon Josefsson Description: libpam-yubico - two-factor password and YubiKey OTP PAM module Closes: 654848 656344 656514 657147 657214 657535 657547 657946 658079 658165 658420 Changes: yubico-pam (2.11-1) unstable; urgency=low . [ Christian Perrier ] * Debconf templates and debian/control reviewed by the debian-l10n- english team as part of the Smith review project. Closes: #654848 * [Debconf translation updates] * Russian (Yuri Kozlov). Closes: #656344 * Danish (Joe Hansen). Closes: #656514 * Dutch; (Jeroen Schot). Closes: #657147 * German (Chris Leick). Closes: #657214 * Czech (Michal Simunek). Closes: #657535 * Swedish (Martin Bagge / brother). Closes: #657547 * Spanish; (Jardi A. Martínez Jordán). Closes: #657946 * French (Julien Patriarca). Closes: #658079 * Polish (Michał Kułach). Closes: #658165 * Portuguese (Miguel Figueiredo). Closes: #658420 . [ Fredrik Thulin ] * Fix crash-bug with challenge-response mode when button-press is required, but button isn't pressed. * Fix a memset() of wrong size, reported by clang. * Add prefix matching to LDAP fetched values. Checksums-Sha1: aeeced406de7f5fb440fe3045e80866535de2fec 53452 libpam-yubico_2.11-1_armel.deb Checksums-Sha256: f3f9bccad24752c6ed8bd587fcd0a211d172cab6b81f3b7090e3d8b9866d589e 53452 libpam-yubico_2.11-1_armel.deb Files: 8384b03c26535c678e35e5a1579b6277 53452 admin optional libpam-yubico_2.11-1_armel.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/yubico-pam-2.11 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge groff-base libykclient-dev libhttp-message-perl mime-support m4 gettext file libhtml-parser-perl intltool libyubikey-dev libldap2-dev libhttp-cookies-perl libwww-perl liburi-perl libhtml-tree-perl autotools-dev po-debconf libnet-http-perl dh-translations libxml-parser-perl libcroco3 libhtml-tagset-perl libxml2 libpopt0 pkg-config libgettextpo0 automake python-scour libyubikey0 libhttp-date-perl man-db libnet-ssleay-perl libfile-listing-perl libykpers-1-1 libencode-locale-perl intltool-debian libhttp-negotiate-perl python2.7 libusb-1.0-0 libio-socket-ssl-perl liblwp-protocol-https-perl cdbs libpam0g-dev html2text libwww-robotrules-perl gettext-base debhelper libykpers-1-dev libunistring0 python libmagic1 libpipeline1 libexpat1 bsdmainutils libykclient3 liblwp-mediatypes-perl autoconf (Reading database ... 17277 files and directories currently installed.) Removing libykclient-dev ... Removing libyubikey-dev ... Removing libldap2-dev ... Removing pkg-config ... Removing cdbs ... Removing libpam0g-dev ... Removing libykpers-1-dev ... Removing libykclient3 ... Purging configuration files for libykclient3 ... Removing dh-translations ... Removing libpopt0 ... Purging configuration files for libpopt0 ... Removing python-scour ... Removing libykpers-1-1 ... Purging configuration files for libykpers-1-1 ... Removing libusb-1.0-0 ... Purging configuration files for libusb-1.0-0 ... Removing debhelper ... Removing python ... Purging configuration files for python ... Removing intltool ... Removing po-debconf ... Removing libxml-parser-perl ... Removing automake ... Removing libyubikey0 ... Purging configuration files for libyubikey0 ... Removing man-db ... Purging configuration files for man-db ... Removing catpages as well as /var/cache/man hierarchy. Removing intltool-debian ... Removing python2.7 ... Purging configuration files for python2.7 ... Removing html2text ... Purging configuration files for html2text ... Removing libpipeline1 ... Purging configuration files for libpipeline1 ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing autoconf ... Purging configuration files for autoconf ... Removing groff-base ... Purging configuration files for groff-base ... Removing mime-support ... Purging configuration files for mime-support ... Removing m4 ... Removing gettext ... Removing file ... Removing autotools-dev ... Removing libgettextpo0 ... Removing gettext-base ... Removing libunistring0 ... Purging configuration files for libunistring0 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libwww-perl ... Removing libhtml-tree-perl ... Removing libfile-listing-perl ... Removing libhttp-negotiate-perl ... Removing liblwp-protocol-https-perl ... Removing libwww-robotrules-perl ... Removing libhttp-cookies-perl ... Removing libnet-http-perl ... Removing libio-socket-ssl-perl ... Removing libhttp-message-perl ... Removing libhtml-parser-perl ... Removing liburi-perl ... Removing libhtml-tagset-perl ... Removing libhttp-date-perl ... Removing libnet-ssleay-perl ... Removing libencode-locale-perl ... Removing liblwp-mediatypes-perl ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20120215-1643 Build needed 00:02:59, 2796k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '32d626e9295645230b8c0e7e4887e91c8486687c'] Scanning for processes to kill in build /home/buildd/build-32d626e9295645230b8c0e7e4887e91c8486687c/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '32d626e9295645230b8c0e7e4887e91c8486687c'] Unmounting chroot for build 32d626e9295645230b8c0e7e4887e91c8486687c... none /home/buildd/build-32d626e9295645230b8c0e7e4887e91c8486687c/chroot-autobuild/proc proc rw,relatime 0 0 none /home/buildd/build-32d626e9295645230b8c0e7e4887e91c8486687c/chroot-autobuild/dev/pts devpts rw,relatime,mode=600,ptmxmode=000 0 0 none /home/buildd/build-32d626e9295645230b8c0e7e4887e91c8486687c/chroot-autobuild/sys sysfs rw,relatime 0 0 none /home/buildd/build-32d626e9295645230b8c0e7e4887e91c8486687c/chroot-autobuild/dev/shm tmpfs rw,relatime 0 0 RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '32d626e9295645230b8c0e7e4887e91c8486687c'] Removing build 32d626e9295645230b8c0e7e4887e91c8486687c