Change logs for dell-recovery source package in Precise

  • dell-recovery (1.24) precise; urgency=low
    
      * Disable memory check for swap determination.
     -- Mario Limonciello <email address hidden>   Mon, 23 Apr 2012 17:15:25 -0500
  • dell-recovery (1.23) precise; urgency=low
    
      * Disable unnecessary efiemu in the 32 bit factory bootloader.  Prevents
        failed postinst due to grub2 1.99-18ubuntu1.
     -- Mario Limonciello <email address hidden>   Thu, 22 Mar 2012 17:02:41 -0500
  • dell-recovery (1.22) precise; urgency=low
    
      * Drop new_autotools.patch.  It's no longer necessary with GRUB2
        1.99-17ubuntu1.
     -- Mario Limonciello <email address hidden>   Wed, 07 Mar 2012 16:31:31 -0600
  • dell-recovery (1.21) precise; urgency=low
    
      * If any directories are found in /kernel on the CD, symlink them
        into /lib/modules on the overlayfs to ensure that alternate kernels
        can be loaded.
      * If 'prepackage.dell' is found in a tarball, ignore it.  Only applicable
        for other tools that will be processing packages.
      * Merge translations from launchpad.
     -- Mario Limonciello <email address hidden>   Tue, 14 Feb 2012 18:57:06 -0600
  • dell-recovery (1.20) precise; urgency=low
    
      * Backport support for newer autotools to the precise set of grub patches.
        (LP: #928881)
      * Make the oneiric patches individual symlinks to precise patches rather
        than a full symlinked directory.
        - Add a preinst to clean up the old scenario.
      * debian/control:
        - Bump standards version.
      * Make 99_dell_recovery executable in source package.
      * Override more lintian warnings we don't care about.
     -- Mario Limonciello <email address hidden>   Thu, 09 Feb 2012 00:54:49 -0600
  • dell-recovery (1.19) precise; urgency=low
    
      * B-d on lsb-release too.
     -- Mario Limonciello <email address hidden>   Mon, 16 Jan 2012 16:12:34 -0600
  • dell-recovery (1.18) precise; urgency=low
    
      * Fix bootloader build test so it works on machines without dell-recovery
        already installed too to avoid a circular dependency.
     -- Mario Limonciello <email address hidden>   Mon, 16 Jan 2012 15:37:10 -0600
  • dell-recovery (1.17) precise; urgency=low
    
      * When showing the install complete screen, set the timeout to -1.
      * Include the 'vbe' module in factory mode too.
      * Add a test to make sure most GRUB binaries will build in the chroot.
      * Build depends on grub-efi-amd64-bin and grub-pc-bin to make sure we test
        building those bootloaders.
      * Remove the theme README (unnecessary)
      * Disable PNG optimization.  Causes problems with GRUB2 theme (GRUB2 can't
        read indexed PNG's).
      * Make GRUB2 theme text white instead of black.
     -- Mario Limonciello <email address hidden>   Mon, 16 Jan 2012 14:50:35 -0600
  • dell-recovery (1.16) precise; urgency=low
    
      * When building binaries in grub/build-binaries.sh, also build an i386-pc
        DVD/USB bootloader.
     -- Mario Limonciello <email address hidden>   Tue, 10 Jan 2012 09:39:21 -0600
  • dell-recovery (1.15) precise; urgency=low
    
      * Update all screenshots in the help document to a current version.
      * Include a GRUB2 theme based on the default GRUB2 upstream theme.
      * If either an i386-pc or x86_64-efi based GRUB is found in the base image
        copy the theme in place.
      * If copying in the GRUB theme, check that the dejavu fonts are already
        generated.  If not, create them.
      * In the grub.cfg files sourced before loading the common one on ISO/USB
        boot, load the appropriate backends first.
     -- Mario Limonciello <email address hidden>   Mon, 09 Jan 2012 19:45:45 -0600
  • dell-recovery (1.14) precise; urgency=low
    
      * Correct the location that GRUBCFG gets written in the binary writing tool.
      * Remove all instances of #UUID# not just the ones that start on the line.
     -- Mario Limonciello <email address hidden>   Tue, 03 Jan 2012 17:26:26 -0600
  • dell-recovery (1.13) precise; urgency=low
    
      [ Mario Limonciello ]
      * Include some updated patches from tyson for XML parsing in bad BIOS
        scenarios.
      * If no matching rec_part initially (blank disk) then don't crash
      * Don't build grub.cfg again if building binaries from bootstrap.
      * Query the release that we're running on to figure out whether to
        use patches for that release when building grub-setup.exe.
      * Include patches for both trunk and precise.
      * Fix file cleanup for dell-recovery-bootloader during purge.
    
      [ David Chen ]
      * Update the maximum size of a partition in the ubuntu.seed recipe
        to make sure partman doesn't make bad decisions about swap partition
        size when working with a >=2TB HDD.
     -- Mario Limonciello <email address hidden>   Wed, 14 Dec 2011 18:02:03 -0500
  • dell-recovery (1.12) precise; urgency=low
    
      [ Mario Limonciello ]
      * Update bootloader patches to current grub2-trunk.
      * Add support to run GRUB2 binary builder out of tree via environment
        variables.
      * Add a 10 second countdown and automatic reboot at the end of stage 1.
      * Call emergency.sh as LAST item in casper.
      * If running in persistent mode, forcefully regenerate the apt-cache
        on boot.
      * Copy files using a blacklist excluding casper-rw rather than an all
        inclusive whitelist.  Fixes problems with persistence and dell-recovery.
      * Update the GPT utility partition creation logic.  (LP: #877858)
      * Capture the state of all packages after post install scripts to prevent
        bad interactions with remove_oem_extras after ubiquity r5804
      * Update README for more current information.
      * Don't regenerate the UUID during stage 1 anymore.  Instead, pre-populate
        the disk's UUID on the kernel command line of the target install.
        Requires casper 1.290 or later to work.
      * Add some preseeded language fixes that are reactive to casper 1.289
        from precise and 1.287.1 from oneiric. (LP: #888298)
        - Don't preseed the language in a standard preseed file as it overrides
          casper's attempt at setting the language.
        - Don't let dell-bootstrap set language based on locale.  Only have it
          set English if no other language has been specified yet.
      * Create a flag on the disk filesystem to indicate an install is in progress.
      * Remove the casper UUID in SUCCESS_SCRIPT as well as stage 1 of recovery.
        This will prevent the RP from booting unless the UUID is present on
        /proc/cmdline.
      * Don't include grubenv in the files that go in /factory on install media.
      * Include a grub.cfg script that will be copied into the recovery media and
        source the proper location of installs in progress.
      * Always set install_finished on completion to ensure sticks aren't booted
        again.
      * Unset install_finished when mounting the RP during OOBE.
    
      [ Kent Baxley ]
      * Preseed chinese installs as zh_CN.UTF-8 rather than just zh_CN.  Fixes
        translation problems for chinese factory installs. (LP: #879114)
    
      [ Chen Hsin-Yi ]
      * Encode all strings stored in XML as UTF-8. (LP: #890113)
      * Add a unit test to test for bug 890113.
    
      [ Chris Townsend ]
      * Fix pyflakes error of assigned but unused variable 'e' from UTF-8 XML
        patch.
     -- Mario Limonciello <email address hidden>   Thu, 17 Nov 2011 19:04:21 -0600
  • dell-recovery (1.11.1) oneiric-proposed; urgency=low
    
      [ Mario Limonciello ]
      * Backport fixes from trunk:
        - Update the GPT utility partition creation logic.  (LP: #877858, #879140)
        - Capture the state of all packages after post install scripts to prevent
          bad interactions with remove_oem_extras after ubiquity r5804.
          (LP: #879137)
    
      [ Kent Baxley ]
      * Backport fixes from trunk:
        - Preseed chinese installs as zh_CN.UTF-8 rather than just zh_CN.  Fixes
          translation problems for chinese factory installs. (LP: #879114)
     -- Mario Limonciello <email address hidden>   Thu, 20 Oct 2011 17:39:58 -0500
  • dell-recovery (1.11) oneiric; urgency=low
    
      * If dell-eula is in the pool mark it for installation.  No changes for livefs
        type installs.
      * Only do the extra check for OS prober disable when using FIST.
      * Update translations from launchpad.
     -- Mario Limonciello <email address hidden>   Thu, 06 Oct 2011 16:07:30 -0500