Format: 1.8 Date: Tue, 31 Dec 2019 07:24:06 -0800 Source: uhd Binary: libuhd-dev libuhd3.15.0 uhd-host Architecture: amd64 Version: 3.15.0.0-0ubuntu1~eoan1 Distribution: eoan Urgency: low Maintainer: Launchpad Build Daemon Changed-By: Ettus Research Description: libuhd-dev - universal hardware driver for Ettus Research products libuhd3.15.0 - hardware driver for Ettus Research products uhd-host - hardware driver for Ettus Research products - host apps Changes: uhd (3.15.0.0-0ubuntu1~eoan1) eoan; urgency=low . * N320: Fix MCR initialization, fix checks for LO distribution board, reset RX IQ balance on init, replace DRAM FIFO with replay block, improve constraints, fix I/Q imbalance compensation, add FPGPIO control * N310: increase default dc offset averaging window, make tunes asynchronous, add capability to control RF filter bypass and freq.band limits, fix setting user DB EEPROM, correctly report N321 vs N320, improve DDR3 BIST, update max revision to 7, fix DMA arbitration to use contiguous packets, replace DRAM FIFO with replay block, fix SFP link up status, add workaround for clocking interference with external reference clocks, disable gpsdo clock/time source options when enable_gps=0 * X300: Fix max bitfile size, fix GPIO ATR property access type, heavily refactor, introduce conn_mgr, add DPDK support, add capability to flash NI-2974 FPGA, fix clocking code, enable 11.52 MHz and 23.04 MHz system ref rates, improve usage of constrained device args, enable ADC gain through RFNoC API, add mode to set master clock rate to arbitrary values between 184.32 and 200 MHz, throttle muxed_zero_copy_if * E320: Fix time source clobbering ref source, add support for RevE, fix reporting of FPGA version hash, fix SFP link up status, fix missing ce_clk driver * E310: Convert to MPM architecture, fix uhd_image_loader usage, fix DMA arbitration to use contiguous packets, reduced DMA chans to 4 (using data stream muxing), fix DRAM_TEST target build * E3xx: Correct frontend name in devtest * B200: Add command to query bootloader status, fix sc12 streaming, fix FIFO sizes on GPIFII interface * UBX: add temperature compensation mode * SBX: Only update ATRs when lock state changes * TwinRX: add LO charge pump properties, increase default charge pump value on LO1, add low spur tuning mode, fix duplicate write to N value in DDC * RFNoC/device3: Read command FIFO size from device instead of hardcoding values, fix multidevice graph connections, ENABLE_RFNOC now defaults to ON, search all nodes for tick rate, add update_graph() call which lets blocks do a graph-wide update of properties, fix missing port arg in SR_WRITE Noc-Script call, constrain send/recv_frame_size baed on MTU, fix flushing on init/deinit, disable FC ACKs for lossless links * RFNOC/FPGA: Fix rb_stb in split stream block, fix off-by-one error in the window block, fix phase reset and -accumulator for DDC and DUC blocks, fix flushing on split-stream block, fix DC offset issue with DDS by using proper rounding, fix DUC/DDC sample rate switching by latching N on M in axi_rate_change, various fixes to uhd_image_builder, fix MTU settings in blocks, align byte count to 8-byte word * RFNOC: Allow UHD_RFNOC_DIR to contain multiple paths * Python API: Replace Boost.Python with PyBind11, fix benchmark_rate statistics, fix phase alignment test script * Python API: Added include of complex.h to allow pybind to convert complex data types * Python API: Make multi_usrp::get_*_usrp_info() return a Python dict * Python API: Fix array processing in send_waveforms() * UHD: Allow ignoring fallthrough warnings, reduce Boost footprint, remove gpsd dependency, improve streaming, reduced the number of compiler warnings, introduce pop() to the prop tree, add typecast operator from uhd::dict<> to std::map<>, properly cache config file data * MPM/mpmd: Introduce compatible rev numbers to support future hardware, fix some resource leaks in mpmd, fix spurious reclaims causing unnecessary warnings, fix resource leaks in liberio xport, allow to mux data streams over liberio transports (e.g. to require fewer DMA channels on E310), wait for DPDK links to come up before proceeding, relax failure handling when updating components (fixes spurious errors when updating FPGA images over SFP), fix issue where RPC initialization would hang on failure * MPM: Re-enable RPC server timeouts after components have been updated * MPMD: Remove arbitraty frame size defaults for UDP transports * MPMD: Fix incorrect link rate warnings * FPGA: Use new device-tree overlay syntax, upgraded to Vivado 2018.3, broke various paths with critical timing, allow SystemVerilog source files, improve viv_modify_bd and viv_modify_tcl_bd, fix resets on 2clk FIFOs * USB: Allow cancelled USB requests to occur * USB: Fix global session race condition * Logging: Always honour log level, don't log colours for non-ttys, fix includes, demote various log messages, fix logging colours, fix deadlock on Windows machines * Examples: Fix benchmark_rate INIT_DELAY, fix memory leak in tx_samples_c * Examples: Remove thread priority elevation * Examples: Add options to benchmark_rate for start delays and priority * Tests: Make the Python interpreter for devtests a parameter, add unit tests to MPM * Utilities: Fix converter benchmark for Py3k and scaling issue * Tools: Fix kitchen_sink * Tools: Fix Wireshark dissectors to work with WS1, 2, and 3 * Tools: Various fixes to FPGA functional verification tests * Docs: Various fixes, fix Doxygen warnings, fix links to KB, update DPDK information about building libraries, add DPDK subsection about thread priorities, update testing procedures * C API: Add uhd_get_abi_string, uhd_get_version_string * CMake: Make manpage compression optional, allow setting of PKG_DOC_DIR from the CMake commandline, add replay example, fix missing 'project', replace ENABLE_PYTHON3 with a simpler Python detection, clean up superfluous modules, improve log statements, bump dependency min versions, add MPM unit testing, fix missing BIGOBJ for MSVC, add our own UHDBoost.cmake to better find Boost across versions and systems, constrain DPDK check to exact version * Formatting: Apply clang-format to all files, break after template<> Checksums-Sha1: 4da1099180cb448c961ed001c8846011d7c29eaf 3209524 libuhd-dev_3.15.0.0-0ubuntu1~eoan1_amd64.deb ae8ba832ffaa67b58f8c1425eb3cc33723e48f03 3097124 libuhd3.15.0_3.15.0.0-0ubuntu1~eoan1_amd64.deb 1b47b57b2bed8a52a39fb59d39cd06024393c5d8 5306508 uhd-host_3.15.0.0-0ubuntu1~eoan1_amd64.deb d7f2d6c8c41df88d3f09ea8746073e5583b980c6 9619 uhd_3.15.0.0-0ubuntu1~eoan1_amd64.buildinfo Checksums-Sha256: a8dff42fbe9bbb25fd76f155eb44b07a89db73bd3604365f9ba8c6fd1e3dadb3 3209524 libuhd-dev_3.15.0.0-0ubuntu1~eoan1_amd64.deb d7ea3f4f796d97ae0a622640e2595c4cba810d3f26d0be3749e1b3f41266c474 3097124 libuhd3.15.0_3.15.0.0-0ubuntu1~eoan1_amd64.deb 12e59bb89268ca30227570bf489b68f2f4fb64fbdc93bfc74f2072376116f0e6 5306508 uhd-host_3.15.0.0-0ubuntu1~eoan1_amd64.deb 2b808ead5f111dc44de34211c3e27609ecc4bbd32484b4b1f3f7dce90dd12271 9619 uhd_3.15.0.0-0ubuntu1~eoan1_amd64.buildinfo Files: 285e9a5890dfb9075d7119d7e38645bc 3209524 libdevel optional libuhd-dev_3.15.0.0-0ubuntu1~eoan1_amd64.deb 7f705a8c2e3c48ad1c7828f6f3024500 3097124 libs optional libuhd3.15.0_3.15.0.0-0ubuntu1~eoan1_amd64.deb 9b08f59a8caa2575a4dc9cb482c1f5fb 5306508 science optional uhd-host_3.15.0.0-0ubuntu1~eoan1_amd64.deb 026b7158e103eb6d4f4d2b9cab8d85ae 9619 science optional uhd_3.15.0.0-0ubuntu1~eoan1_amd64.buildinfo