diff -Nru parlatype-1.5.4/ABOUT-NLS parlatype-1.5.6/ABOUT-NLS --- parlatype-1.5.4/ABOUT-NLS 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/ABOUT-NLS 2018-04-06 07:40:30.000000000 +0000 @@ -0,0 +1,1379 @@ +1 Notes on the Free Translation Project +*************************************** + +Free software is going international! The Free Translation Project is a +way to get maintainers of free software, translators, and users all +together, so that free software will gradually become able to speak many +languages. A few packages already provide translations for their +messages. + + If you found this 'ABOUT-NLS' file inside a distribution, you may +assume that the distributed package does use GNU 'gettext' internally, +itself available at your nearest GNU archive site. But you do _not_ +need to install GNU 'gettext' prior to configuring, installing or using +this package with messages translated. + + Installers will find here some useful hints. These notes also +explain how users should proceed for getting the programs to use the +available translations. They tell how people wanting to contribute and +work on translations can contact the appropriate team. + +1.1 INSTALL Matters +=================== + +Some packages are "localizable" when properly installed; the programs +they contain can be made to speak your own native language. Most such +packages use GNU 'gettext'. Other packages have their own ways to +internationalization, predating GNU 'gettext'. + + By default, this package will be installed to allow translation of +messages. It will automatically detect whether the system already +provides the GNU 'gettext' functions. Installers may use special +options at configuration time for changing the default behaviour. The +command: + + ./configure --disable-nls + +will _totally_ disable translation of messages. + + When you already have GNU 'gettext' installed on your system and run +configure without an option for your new package, 'configure' will +probably detect the previously built and installed 'libintl' library and +will decide to use it. If not, you may have to to use the +'--with-libintl-prefix' option to tell 'configure' where to look for it. + + Internationalized packages usually have many 'po/LL.po' files, where +LL gives an ISO 639 two-letter code identifying the language. Unless +translations have been forbidden at 'configure' time by using the +'--disable-nls' switch, all available translations are installed +together with the package. However, the environment variable 'LINGUAS' +may be set, prior to configuration, to limit the installed set. +'LINGUAS' should then contain a space separated list of two-letter +codes, stating which languages are allowed. + +1.2 Using This Package +====================== + +As a user, if your language has been installed for this package, you +only have to set the 'LANG' environment variable to the appropriate +'LL_CC' combination. If you happen to have the 'LC_ALL' or some other +'LC_xxx' environment variables set, you should unset them before setting +'LANG', otherwise the setting of 'LANG' will not have the desired +effect. Here 'LL' is an ISO 639 two-letter language code, and 'CC' is +an ISO 3166 two-letter country code. For example, let's suppose that +you speak German and live in Germany. At the shell prompt, merely +execute 'setenv LANG de_DE' (in 'csh'), 'export LANG; LANG=de_DE' (in +'sh') or 'export LANG=de_DE' (in 'bash'). This can be done from your +'.login' or '.profile' file, once and for all. + + You might think that the country code specification is redundant. +But in fact, some languages have dialects in different countries. For +example, 'de_AT' is used for Austria, and 'pt_BR' for Brazil. The +country code serves to distinguish the dialects. + + The locale naming convention of 'LL_CC', with 'LL' denoting the +language and 'CC' denoting the country, is the one use on systems based +on GNU libc. On other systems, some variations of this scheme are used, +such as 'LL' or 'LL_CC.ENCODING'. You can get the list of locales +supported by your system for your language by running the command +'locale -a | grep '^LL''. + + Not all programs have translations for all languages. By default, an +English message is shown in place of a nonexistent translation. If you +understand other languages, you can set up a priority list of languages. +This is done through a different environment variable, called +'LANGUAGE'. GNU 'gettext' gives preference to 'LANGUAGE' over 'LANG' +for the purpose of message handling, but you still need to have 'LANG' +set to the primary language; this is required by other parts of the +system libraries. For example, some Swedish users who would rather read +translations in German than English for when Swedish is not available, +set 'LANGUAGE' to 'sv:de' while leaving 'LANG' to 'sv_SE'. + + Special advice for Norwegian users: The language code for Norwegian +bokma*l changed from 'no' to 'nb' recently (in 2003). During the +transition period, while some message catalogs for this language are +installed under 'nb' and some older ones under 'no', it's recommended +for Norwegian users to set 'LANGUAGE' to 'nb:no' so that both newer and +older translations are used. + + In the 'LANGUAGE' environment variable, but not in the 'LANG' +environment variable, 'LL_CC' combinations can be abbreviated as 'LL' to +denote the language's main dialect. For example, 'de' is equivalent to +'de_DE' (German as spoken in Germany), and 'pt' to 'pt_PT' (Portuguese +as spoken in Portugal) in this context. + +1.3 Translating Teams +===================== + +For the Free Translation Project to be a success, we need interested +people who like their own language and write it well, and who are also +able to synergize with other translators speaking the same language. +Each translation team has its own mailing list. The up-to-date list of +teams can be found at the Free Translation Project's homepage, +'http://translationproject.org/', in the "Teams" area. + + If you'd like to volunteer to _work_ at translating messages, you +should become a member of the translating team for your own language. +The subscribing address is _not_ the same as the list itself, it has +'-request' appended. For example, speakers of Swedish can send a +message to 'sv-request@li.org', having this message body: + + subscribe + + Keep in mind that team members are expected to participate _actively_ +in translations, or at solving translational difficulties, rather than +merely lurking around. If your team does not exist yet and you want to +start one, or if you are unsure about what to do or how to get started, +please write to 'coordinator@translationproject.org' to reach the +coordinator for all translator teams. + + The English team is special. It works at improving and uniformizing +the terminology in use. Proven linguistic skills are praised more than +programming skills, here. + +1.4 Available Packages +====================== + +Languages are not equally supported in all packages. The following +matrix shows the current state of internationalization, as of Jun 2014. +The matrix shows, in regard of each package, for which languages PO +files have been submitted to translation coordination, with a +translation percentage of at least 50%. + + Ready PO files af am an ar as ast az be bg bn bn_IN bs ca crh cs + +---------------------------------------------------+ + a2ps | [] [] [] | + aegis | | + anubis | | + aspell | [] [] [] | + bash | [] [] [] | + bfd | | + binutils | [] | + bison | | + bison-runtime | [] | + buzztrax | [] | + ccd2cue | | + ccide | | + cflow | | + clisp | | + coreutils | [] [] | + cpio | | + cppi | | + cpplib | [] | + cryptsetup | [] | + datamash | | + denemo | [] [] | + dfarc | [] | + dialog | [] [] [] | + dico | | + diffutils | [] | + dink | [] | + direvent | | + doodle | [] | + dos2unix | | + dos2unix-man | | + e2fsprogs | [] [] | + enscript | [] | + exif | [] | + fetchmail | [] [] | + findutils | [] | + flex | [] | + freedink | [] [] | + fusionforge | | + gas | | + gawk | [] | + gcal | [] | + gcc | | + gdbm | | + gettext-examples | [] [] [] [] [] | + gettext-runtime | [] [] [] | + gettext-tools | [] [] | + gjay | | + glunarclock | [] [] [] | + gnubiff | [] | + gnubik | [] | + gnucash | () () [] | + gnuchess | | + gnulib | [] | + gnunet | | + gnunet-gtk | | + gold | | + gphoto2 | [] | + gprof | [] | + gramadoir | | + grep | [] [] [] | + grub | [] | + gsasl | | + gss | | + gst-plugins-bad | [] | + gst-plugins-base | [] [] [] | + gst-plugins-good | [] [] [] | + gst-plugins-ugly | [] [] [] | + gstreamer | [] [] [] [] | + gtick | [] | + gtkam | [] [] | + gtkspell | [] [] [] [] [] | + guix | | + guix-packages | | + gutenprint | [] | + hello | [] | + help2man | | + help2man-texi | | + hylafax | | + idutils | | + iso_15924 | [] | + iso_3166 | [] [] [] [] [] [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | [] | + iso_639 | [] [] [] [] [] [] [] [] [] | + iso_639_3 | [] [] | + iso_639_5 | | + jwhois | | + kbd | [] | + klavaro | [] [] [] [] [] | + latrine | | + ld | [] | + leafpad | [] [] [] [] | + libc | [] [] [] | + libexif | () | + libextractor | | + libgnutls | [] | + libgphoto2 | [] | + libgphoto2_port | [] | + libgsasl | | + libiconv | [] [] | + libidn | [] | + liferea | [] [] [] [] | + lilypond | [] [] | + lordsawar | [] | + lprng | | + lynx | [] [] | + m4 | [] | + mailfromd | | + mailutils | | + make | [] | + man-db | [] [] | + man-db-manpages | | + midi-instruments | [] [] [] | + minicom | [] | + mkisofs | [] | + myserver | [] | + nano | [] [] [] | + opcodes | | + parted | [] | + pies | | + popt | [] | + procps-ng | | + procps-ng-man | | + psmisc | [] | + pspp | [] | + pushover | [] | + pwdutils | | + pyspread | | + radius | [] | + recode | [] [] [] | + recutils | | + rpm | | + rush | | + sarg | | + sed | [] [] [] | + sharutils | [] | + shishi | | + skribilo | | + solfege | [] | + solfege-manual | | + spotmachine | | + sudo | [] [] | + sudoers | [] [] | + sysstat | [] | + tar | [] [] [] | + texinfo | [] [] | + texinfo_document | [] | + tigervnc | [] | + tin | | + tin-man | | + tracgoogleappsa... | | + trader | | + util-linux | [] | + ve | | + vice | | + vmm | | + vorbis-tools | [] | + wastesedge | | + wcd | | + wcd-man | | + wdiff | [] [] | + wget | [] | + wyslij-po | | + xboard | | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +---------------------------------------------------+ + af am an ar as ast az be bg bn bn_IN bs ca crh cs + 4 0 2 5 3 11 0 8 23 3 3 1 54 4 73 + + da de el en en_GB en_ZA eo es et eu fa fi fr + +--------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] [] [] | + aegis | [] [] [] [] | + anubis | [] [] [] [] [] | + aspell | [] [] [] [] [] [] [] | + bash | [] [] [] | + bfd | [] [] [] [] | + binutils | [] [] [] | + bison | [] [] [] [] [] [] [] [] | + bison-runtime | [] [] [] [] [] [] [] [] | + buzztrax | [] [] [] [] | + ccd2cue | [] [] [] | + ccide | [] [] [] [] [] [] | + cflow | [] [] [] [] [] | + clisp | [] [] [] [] [] | + coreutils | [] [] [] [] [] | + cpio | [] [] [] [] [] | + cppi | [] [] [] [] [] | + cpplib | [] [] [] [] [] [] | + cryptsetup | [] [] [] [] [] | + datamash | [] [] [] [] | + denemo | [] | + dfarc | [] [] [] [] [] [] | + dialog | [] [] [] [] [] [] [] [] [] | + dico | [] [] [] [] | + diffutils | [] [] [] [] [] [] | + dink | [] [] [] [] [] [] | + direvent | [] [] [] [] | + doodle | [] [] [] [] | + dos2unix | [] [] [] [] [] | + dos2unix-man | [] [] [] | + e2fsprogs | [] [] [] [] [] | + enscript | [] [] [] [] [] [] | + exif | [] [] [] [] [] [] | + fetchmail | [] () [] [] [] [] [] | + findutils | [] [] [] [] [] [] [] [] | + flex | [] [] [] [] [] [] | + freedink | [] [] [] [] [] [] [] [] | + fusionforge | [] [] [] | + gas | [] [] [] | + gawk | [] [] [] [] [] | + gcal | [] [] [] [] | + gcc | [] [] | + gdbm | [] [] [] [] [] | + gettext-examples | [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] | + gettext-tools | [] [] [] [] [] | + gjay | [] [] [] [] | + glunarclock | [] [] [] [] [] | + gnubiff | () [] [] () | + gnubik | [] [] [] [] [] | + gnucash | [] () () () () () () | + gnuchess | [] [] [] [] | + gnulib | [] [] [] [] [] [] [] | + gnunet | [] | + gnunet-gtk | [] | + gold | [] [] [] | + gphoto2 | [] () [] [] | + gprof | [] [] [] [] [] [] | + gramadoir | [] [] [] [] [] | + grep | [] [] [] [] [] [] [] | + grub | [] [] [] [] [] | + gsasl | [] [] [] [] [] | + gss | [] [] [] [] [] | + gst-plugins-bad | [] [] | + gst-plugins-base | [] [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] [] [] | + gtick | [] () [] [] [] | + gtkam | [] () [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] | + guix | [] [] | + guix-packages | | + gutenprint | [] [] [] [] | + hello | [] [] [] [] [] [] [] [] | + help2man | [] [] [] [] [] [] [] | + help2man-texi | [] [] [] | + hylafax | [] [] | + idutils | [] [] [] [] [] | + iso_15924 | [] () [] [] () [] () | + iso_3166 | [] () [] [] [] [] () [] () | + iso_3166_2 | [] () () () | + iso_4217 | [] () [] [] [] () [] () | + iso_639 | [] () [] [] () [] () | + iso_639_3 | () () () | + iso_639_5 | () () () | + jwhois | [] [] [] [] [] | + kbd | [] [] [] [] [] [] | + klavaro | [] [] [] [] [] [] [] | + latrine | [] () [] [] | + ld | [] [] [] [] | + leafpad | [] [] [] [] [] [] [] [] | + libc | [] [] [] [] [] | + libexif | [] [] () [] [] | + libextractor | [] | + libgnutls | [] [] [] [] | + libgphoto2 | [] () [] | + libgphoto2_port | [] () [] [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] [] [] | + libidn | [] [] [] [] [] | + liferea | [] () [] [] [] [] [] | + lilypond | [] [] [] [] [] [] | + lordsawar | [] [] | + lprng | | + lynx | [] [] [] [] [] [] | + m4 | [] [] [] [] [] [] | + mailfromd | [] | + mailutils | [] [] [] [] | + make | [] [] [] [] [] | + man-db | [] [] [] [] | + man-db-manpages | [] [] | + midi-instruments | [] [] [] [] [] [] [] [] [] | + minicom | [] [] [] [] [] | + mkisofs | [] [] [] | + myserver | [] [] [] [] | + nano | [] [] [] [] [] [] [] | + opcodes | [] [] [] [] [] | + parted | [] [] [] | + pies | [] | + popt | [] [] [] [] [] [] | + procps-ng | [] [] | + procps-ng-man | [] [] | + psmisc | [] [] [] [] [] [] [] | + pspp | [] [] [] | + pushover | () [] [] [] | + pwdutils | [] [] [] | + pyspread | [] [] [] | + radius | [] [] | + recode | [] [] [] [] [] [] [] | + recutils | [] [] [] [] | + rpm | [] [] [] [] [] | + rush | [] [] [] | + sarg | [] [] | + sed | [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | [] [] [] | + skribilo | [] [] | + solfege | [] [] [] [] [] [] [] [] | + solfege-manual | [] [] [] [] [] | + spotmachine | [] [] [] [] | + sudo | [] [] [] [] [] [] | + sudoers | [] [] [] [] [] [] | + sysstat | [] [] [] [] [] [] | + tar | [] [] [] [] [] [] [] | + texinfo | [] [] [] [] [] | + texinfo_document | [] [] [] [] | + tigervnc | [] [] [] [] [] [] | + tin | [] [] [] [] | + tin-man | [] | + tracgoogleappsa... | [] [] [] [] [] | + trader | [] [] [] [] [] [] | + util-linux | [] [] [] [] | + ve | [] [] [] [] [] | + vice | () () () | + vmm | [] [] | + vorbis-tools | [] [] [] [] | + wastesedge | [] () | + wcd | [] [] [] [] | + wcd-man | [] | + wdiff | [] [] [] [] [] [] [] | + wget | [] [] [] [] [] [] | + wyslij-po | [] [] [] [] | + xboard | [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] [] [] | + +--------------------------------------------------+ + da de el en en_GB en_ZA eo es et eu fa fi fr + 120 130 32 1 6 0 94 95 22 13 4 103 136 + + ga gd gl gu he hi hr hu hy ia id is it ja ka kk + +-------------------------------------------------+ + a2ps | [] [] [] [] | + aegis | [] | + anubis | [] [] [] [] | + aspell | [] [] [] [] [] | + bash | [] [] [] | + bfd | [] [] | + binutils | [] [] [] | + bison | [] | + bison-runtime | [] [] [] [] [] [] [] [] | + buzztrax | | + ccd2cue | [] | + ccide | [] [] | + cflow | [] [] [] | + clisp | | + coreutils | [] [] [] | + cpio | [] [] [] [] [] [] | + cppi | [] [] [] [] [] | + cpplib | [] [] | + cryptsetup | [] | + datamash | | + denemo | [] | + dfarc | [] [] [] | + dialog | [] [] [] [] [] [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] | + dink | [] | + direvent | [] | + doodle | [] [] | + dos2unix | [] [] | + dos2unix-man | | + e2fsprogs | [] | + enscript | [] [] [] | + exif | [] [] [] [] [] [] | + fetchmail | [] [] [] | + findutils | [] [] [] [] [] [] [] | + flex | [] | + freedink | [] [] [] [] | + fusionforge | | + gas | [] | + gawk | [] () [] | + gcal | | + gcc | | + gdbm | | + gettext-examples | [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] [] | + gettext-tools | [] [] [] | + gjay | [] | + glunarclock | [] [] [] [] [] [] | + gnubiff | [] [] () | + gnubik | [] [] [] | + gnucash | () () () () () [] | + gnuchess | | + gnulib | [] [] [] [] [] | + gnunet | | + gnunet-gtk | | + gold | [] [] | + gphoto2 | [] [] [] [] | + gprof | [] [] [] [] | + gramadoir | [] [] [] | + grep | [] [] [] [] [] [] [] | + grub | [] [] [] | + gsasl | [] [] [] [] [] | + gss | [] [] [] [] [] | + gst-plugins-bad | [] | + gst-plugins-base | [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] [] [] | + gtkam | [] [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] [] [] | + guix | | + guix-packages | | + gutenprint | [] [] [] | + hello | [] [] [] [] [] | + help2man | [] [] [] | + help2man-texi | | + hylafax | [] | + idutils | [] [] | + iso_15924 | [] [] [] [] [] [] | + iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] | + iso_3166_2 | [] [] | + iso_4217 | [] [] [] [] [] [] | + iso_639 | [] [] [] [] [] [] [] [] [] | + iso_639_3 | [] [] | + iso_639_5 | | + jwhois | [] [] [] [] | + kbd | [] [] [] | + klavaro | [] [] [] [] [] | + latrine | [] | + ld | [] [] [] [] | + leafpad | [] [] [] [] [] [] [] () | + libc | [] [] [] [] [] | + libexif | [] | + libextractor | | + libgnutls | [] | + libgphoto2 | [] [] | + libgphoto2_port | [] [] | + libgsasl | [] [] [] [] | + libiconv | [] [] [] [] [] [] [] | + libidn | [] [] [] [] | + liferea | [] [] [] [] [] | + lilypond | [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] [] | + m4 | [] [] [] [] [] | + mailfromd | | + mailutils | | + make | [] [] [] [] | + man-db | [] [] | + man-db-manpages | [] [] | + midi-instruments | [] [] [] [] [] [] [] [] [] | + minicom | [] [] [] | + mkisofs | [] [] | + myserver | [] | + nano | [] [] [] [] [] | + opcodes | [] [] [] | + parted | [] [] [] [] | + pies | | + popt | [] [] [] [] [] [] [] [] [] [] | + procps-ng | | + procps-ng-man | | + psmisc | [] [] [] [] | + pspp | [] [] | + pushover | [] | + pwdutils | [] | + pyspread | | + radius | [] | + recode | [] [] [] [] [] [] [] | + recutils | | + rpm | [] | + rush | [] | + sarg | | + sed | [] [] [] [] [] [] [] | + sharutils | | + shishi | | + skribilo | [] | + solfege | [] [] | + solfege-manual | | + spotmachine | | + sudo | [] [] [] [] | + sudoers | [] [] [] | + sysstat | [] [] [] | + tar | [] [] [] [] [] [] | + texinfo | [] [] [] | + texinfo_document | [] [] | + tigervnc | | + tin | | + tin-man | | + tracgoogleappsa... | [] [] [] [] | + trader | [] [] | + util-linux | [] | + ve | [] | + vice | () () | + vmm | | + vorbis-tools | [] [] | + wastesedge | () | + wcd | | + wcd-man | | + wdiff | [] [] [] | + wget | [] [] [] | + wyslij-po | [] [] [] | + xboard | | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] | + +-------------------------------------------------+ + ga gd gl gu he hi hr hu hy ia id is it ja ka kk + 35 2 47 4 8 2 53 69 2 6 80 11 86 58 0 3 + + kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl + +--------------------------------------------------+ + a2ps | [] [] | + aegis | [] | + anubis | [] [] [] | + aspell | [] [] | + bash | [] [] | + bfd | | + binutils | | + bison | [] | + bison-runtime | [] [] [] [] [] [] | + buzztrax | | + ccd2cue | | + ccide | [] [] | + cflow | [] | + clisp | [] | + coreutils | [] [] | + cpio | [] | + cppi | | + cpplib | [] | + cryptsetup | [] | + datamash | [] [] | + denemo | | + dfarc | [] [] | + dialog | [] [] [] [] [] [] | + dico | | + diffutils | [] [] [] | + dink | [] | + direvent | [] | + doodle | [] | + dos2unix | [] [] | + dos2unix-man | [] | + e2fsprogs | [] | + enscript | [] | + exif | [] [] | + fetchmail | [] | + findutils | [] [] | + flex | [] | + freedink | [] [] | + fusionforge | | + gas | | + gawk | [] | + gcal | | + gcc | | + gdbm | | + gettext-examples | [] [] [] [] [] [] | + gettext-runtime | [] [] | + gettext-tools | [] | + gjay | | + glunarclock | [] [] | + gnubiff | [] | + gnubik | [] [] | + gnucash | () () () () () () () [] | + gnuchess | [] [] | + gnulib | [] | + gnunet | | + gnunet-gtk | | + gold | | + gphoto2 | [] | + gprof | [] [] | + gramadoir | [] | + grep | [] [] | + grub | [] [] [] | + gsasl | [] | + gss | | + gst-plugins-bad | [] [] | + gst-plugins-base | [] [] [] | + gst-plugins-good | [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] | + gstreamer | [] [] | + gtick | [] | + gtkam | [] [] | + gtkspell | [] [] [] [] [] [] [] | + guix | | + guix-packages | | + gutenprint | [] | + hello | [] [] [] | + help2man | [] | + help2man-texi | | + hylafax | [] | + idutils | [] | + iso_15924 | () [] [] | + iso_3166 | [] [] [] () [] [] [] [] [] [] | + iso_3166_2 | () [] | + iso_4217 | () [] [] [] | + iso_639 | [] [] () [] [] [] [] | + iso_639_3 | [] () [] | + iso_639_5 | () | + jwhois | [] [] | + kbd | [] | + klavaro | [] [] | + latrine | | + ld | | + leafpad | [] [] [] [] [] | + libc | [] [] | + libexif | [] | + libextractor | [] | + libgnutls | [] [] | + libgphoto2 | [] | + libgphoto2_port | [] | + libgsasl | [] | + libiconv | [] [] | + libidn | [] | + liferea | [] [] [] | + lilypond | [] | + lordsawar | | + lprng | | + lynx | [] | + m4 | [] | + mailfromd | | + mailutils | | + make | [] [] | + man-db | [] | + man-db-manpages | [] | + midi-instruments | [] [] [] [] [] [] [] | + minicom | [] | + mkisofs | [] | + myserver | | + nano | [] [] [] | + opcodes | [] | + parted | [] | + pies | | + popt | [] [] [] [] [] | + procps-ng | | + procps-ng-man | | + psmisc | [] | + pspp | [] [] | + pushover | | + pwdutils | [] | + pyspread | | + radius | [] | + recode | [] [] | + recutils | [] | + rpm | [] | + rush | [] | + sarg | | + sed | [] [] | + sharutils | [] | + shishi | | + skribilo | | + solfege | [] [] | + solfege-manual | [] | + spotmachine | [] | + sudo | [] [] | + sudoers | [] [] | + sysstat | [] [] | + tar | [] [] [] | + texinfo | [] | + texinfo_document | [] | + tigervnc | [] | + tin | | + tin-man | | + tracgoogleappsa... | [] [] [] | + trader | [] | + util-linux | [] | + ve | [] | + vice | [] | + vmm | [] | + vorbis-tools | [] | + wastesedge | [] | + wcd | [] | + wcd-man | [] | + wdiff | [] | + wget | [] [] | + wyslij-po | [] | + xboard | [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +--------------------------------------------------+ + kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl + 5 11 4 6 0 13 22 3 3 3 4 11 2 40 1 124 + + nn or os pa pl ps pt pt_BR ro ru rw sk sl sq sr + +--------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] | + aegis | [] [] | + anubis | [] [] [] | + aspell | [] [] [] [] [] [] [] | + bash | [] [] [] [] [] | + bfd | [] | + binutils | [] [] | + bison | [] [] [] | + bison-runtime | [] [] [] [] [] [] [] [] | + buzztrax | | + ccd2cue | [] | + ccide | [] [] [] | + cflow | [] [] | + clisp | [] | + coreutils | [] [] [] [] | + cpio | [] [] [] | + cppi | [] [] [] | + cpplib | [] [] [] | + cryptsetup | [] [] | + datamash | [] [] | + denemo | | + dfarc | [] [] [] | + dialog | [] [] [] [] [] [] [] | + dico | [] | + diffutils | [] [] | + dink | | + direvent | [] [] | + doodle | [] [] | + dos2unix | [] [] [] [] | + dos2unix-man | [] [] | + e2fsprogs | [] | + enscript | [] [] [] [] [] [] | + exif | [] [] [] [] [] [] | + fetchmail | [] [] [] | + findutils | [] [] [] [] [] | + flex | [] [] [] [] [] | + freedink | [] [] [] [] [] | + fusionforge | | + gas | | + gawk | [] | + gcal | | + gcc | | + gdbm | [] [] [] | + gettext-examples | [] [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] [] [] [] | + gettext-tools | [] [] [] [] [] [] [] | + gjay | [] | + glunarclock | [] [] [] [] [] [] | + gnubiff | [] | + gnubik | [] [] [] [] | + gnucash | () () () () [] | + gnuchess | [] [] | + gnulib | [] [] [] [] [] | + gnunet | | + gnunet-gtk | | + gold | | + gphoto2 | [] [] [] [] [] | + gprof | [] [] [] [] | + gramadoir | [] [] | + grep | [] [] [] [] [] [] | + grub | [] [] [] [] [] | + gsasl | [] [] [] | + gss | [] [] [] [] | + gst-plugins-bad | [] [] [] [] | + gst-plugins-base | [] [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] [] [] | + gtick | [] [] [] [] [] | + gtkam | [] [] [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] [] | + guix | | + guix-packages | | + gutenprint | [] [] | + hello | [] [] [] [] [] [] | + help2man | [] [] [] [] | + help2man-texi | [] | + hylafax | | + idutils | [] [] [] | + iso_15924 | [] () [] [] [] [] | + iso_3166 | [] [] [] [] () [] [] [] [] [] [] [] [] | + iso_3166_2 | [] () [] | + iso_4217 | [] [] () [] [] [] [] [] | + iso_639 | [] [] [] () [] [] [] [] [] [] | + iso_639_3 | [] () | + iso_639_5 | () [] | + jwhois | [] [] [] [] | + kbd | [] [] | + klavaro | [] [] [] [] [] | + latrine | [] | + ld | | + leafpad | [] [] [] [] [] [] [] [] [] | + libc | [] [] [] | + libexif | [] () [] | + libextractor | [] | + libgnutls | [] | + libgphoto2 | [] | + libgphoto2_port | [] [] [] [] [] | + libgsasl | [] [] [] [] | + libiconv | [] [] [] [] [] | + libidn | [] [] [] | + liferea | [] [] [] [] () [] [] | + lilypond | | + lordsawar | | + lprng | [] | + lynx | [] [] | + m4 | [] [] [] [] [] | + mailfromd | [] | + mailutils | [] | + make | [] [] [] | + man-db | [] [] [] | + man-db-manpages | [] [] [] | + midi-instruments | [] [] [] [] [] [] [] [] | + minicom | [] [] [] [] | + mkisofs | [] [] [] | + myserver | [] [] | + nano | [] [] [] [] [] [] | + opcodes | | + parted | [] [] [] [] [] [] | + pies | [] | + popt | [] [] [] [] [] [] | + procps-ng | [] | + procps-ng-man | [] | + psmisc | [] [] [] [] | + pspp | [] [] | + pushover | | + pwdutils | [] | + pyspread | [] [] | + radius | [] [] | + recode | [] [] [] [] [] [] [] [] | + recutils | [] | + rpm | [] | + rush | [] [] [] | + sarg | [] [] | + sed | [] [] [] [] [] [] [] [] | + sharutils | [] [] [] | + shishi | [] [] | + skribilo | | + solfege | [] [] [] | + solfege-manual | [] [] | + spotmachine | [] [] | + sudo | [] [] [] [] [] [] | + sudoers | [] [] [] [] | + sysstat | [] [] [] [] [] | + tar | [] [] [] [] [] | + texinfo | [] [] [] | + texinfo_document | [] [] | + tigervnc | [] | + tin | [] | + tin-man | | + tracgoogleappsa... | [] [] [] [] | + trader | [] | + util-linux | [] [] | + ve | [] [] [] | + vice | | + vmm | | + vorbis-tools | [] [] [] | + wastesedge | | + wcd | | + wcd-man | | + wdiff | [] [] [] [] [] | + wget | [] [] [] [] | + wyslij-po | [] [] [] [] | + xboard | [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] | + +--------------------------------------------------+ + nn or os pa pl ps pt pt_BR ro ru rw sk sl sq sr + 7 3 1 6 114 1 12 83 32 80 3 38 45 7 94 + + sv sw ta te tg th tr uk ur vi wa wo zh_CN zh_HK + +---------------------------------------------------+ + a2ps | [] [] [] [] [] | + aegis | [] | + anubis | [] [] [] [] | + aspell | [] [] [] [] | + bash | [] [] [] [] | + bfd | [] [] | + binutils | [] [] [] | + bison | [] [] [] [] | + bison-runtime | [] [] [] [] [] [] | + buzztrax | [] [] [] | + ccd2cue | [] [] [] | + ccide | [] [] [] [] | + cflow | [] [] [] [] | + clisp | | + coreutils | [] [] [] [] | + cpio | [] [] [] [] [] | + cppi | [] [] [] [] | + cpplib | [] [] [] [] [] | + cryptsetup | [] [] [] | + datamash | [] [] [] | + denemo | | + dfarc | [] | + dialog | [] [] [] [] [] [] | + dico | [] | + diffutils | [] [] [] [] [] | + dink | | + direvent | [] [] | + doodle | [] [] | + dos2unix | [] [] [] [] | + dos2unix-man | [] [] [] | + e2fsprogs | [] [] [] [] | + enscript | [] [] [] [] | + exif | [] [] [] [] [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] | + flex | [] [] [] [] | + freedink | [] [] | + fusionforge | | + gas | [] | + gawk | [] [] | + gcal | [] [] | + gcc | [] [] | + gdbm | [] [] | + gettext-examples | [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] | + gettext-tools | [] [] [] [] [] | + gjay | [] [] | + glunarclock | [] [] [] [] | + gnubiff | [] [] | + gnubik | [] [] [] [] | + gnucash | () () () () [] | + gnuchess | [] [] | + gnulib | [] [] [] [] | + gnunet | | + gnunet-gtk | | + gold | [] [] | + gphoto2 | [] [] [] [] | + gprof | [] [] [] [] | + gramadoir | [] [] [] | + grep | [] [] [] [] [] | + grub | [] [] [] [] | + gsasl | [] [] [] [] | + gss | [] [] [] | + gst-plugins-bad | [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] | + gtkam | [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] | + guix | [] | + guix-packages | | + gutenprint | [] [] [] [] | + hello | [] [] [] [] [] [] | + help2man | [] [] [] | + help2man-texi | [] | + hylafax | [] | + idutils | [] [] [] | + iso_15924 | [] () [] [] () [] | + iso_3166 | [] [] () [] [] () [] [] [] | + iso_3166_2 | () [] [] () [] | + iso_4217 | [] () [] [] () [] [] | + iso_639 | [] [] [] () [] [] () [] [] [] | + iso_639_3 | [] () [] [] () | + iso_639_5 | () [] () | + jwhois | [] [] [] [] | + kbd | [] [] [] | + klavaro | [] [] [] [] [] [] | + latrine | [] [] | + ld | [] [] [] [] [] | + leafpad | [] [] [] [] [] [] | + libc | [] [] [] [] [] | + libexif | [] () | + libextractor | [] [] | + libgnutls | [] [] [] [] | + libgphoto2 | [] [] | + libgphoto2_port | [] [] [] [] | + libgsasl | [] [] [] [] | + libiconv | [] [] [] [] [] | + libidn | () [] [] [] | + liferea | [] [] [] [] [] | + lilypond | [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] [] | + m4 | [] [] [] | + mailfromd | [] [] | + mailutils | [] | + make | [] [] [] [] | + man-db | [] [] | + man-db-manpages | [] | + midi-instruments | [] [] [] [] [] [] | + minicom | [] [] | + mkisofs | [] [] [] | + myserver | [] | + nano | [] [] [] [] | + opcodes | [] [] [] | + parted | [] [] [] [] [] | + pies | [] [] | + popt | [] [] [] [] [] [] [] | + procps-ng | [] [] | + procps-ng-man | [] | + psmisc | [] [] [] [] | + pspp | [] [] [] | + pushover | [] | + pwdutils | [] [] | + pyspread | [] | + radius | [] [] | + recode | [] [] [] [] | + recutils | [] [] [] | + rpm | [] [] [] [] | + rush | [] [] | + sarg | | + sed | [] [] [] [] [] | + sharutils | [] [] [] | + shishi | [] [] | + skribilo | [] | + solfege | [] [] [] | + solfege-manual | [] | + spotmachine | [] [] [] | + sudo | [] [] [] [] | + sudoers | [] [] [] | + sysstat | [] [] [] [] [] | + tar | [] [] [] [] [] | + texinfo | [] [] [] | + texinfo_document | [] | + tigervnc | [] [] | + tin | [] | + tin-man | | + tracgoogleappsa... | [] [] [] [] [] | + trader | [] | + util-linux | [] [] [] | + ve | [] [] [] [] | + vice | () () | + vmm | | + vorbis-tools | [] [] | + wastesedge | | + wcd | [] [] [] | + wcd-man | [] | + wdiff | [] [] [] [] | + wget | [] [] [] | + wyslij-po | [] [] | + xboard | [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] | + +---------------------------------------------------+ + sv sw ta te tg th tr uk ur vi wa wo zh_CN zh_HK + 91 1 4 3 0 13 50 113 1 126 7 1 95 7 + + zh_TW + +-------+ + a2ps | | 30 + aegis | | 9 + anubis | | 19 + aspell | | 28 + bash | [] | 21 + bfd | | 9 + binutils | | 12 + bison | [] | 18 + bison-runtime | [] | 38 + buzztrax | | 8 + ccd2cue | | 8 + ccide | | 17 + cflow | | 15 + clisp | | 10 + coreutils | | 20 + cpio | | 20 + cppi | | 17 + cpplib | [] | 19 + cryptsetup | | 13 + datamash | | 11 + denemo | | 4 + dfarc | | 16 + dialog | [] | 42 + dico | | 6 + diffutils | | 21 + dink | | 9 + direvent | | 10 + doodle | | 12 + dos2unix | [] | 18 + dos2unix-man | | 9 + e2fsprogs | | 14 + enscript | | 21 + exif | | 26 + fetchmail | | 19 + findutils | | 28 + flex | [] | 19 + freedink | | 23 + fusionforge | | 3 + gas | | 5 + gawk | | 12 + gcal | | 7 + gcc | | 4 + gdbm | | 10 + gettext-examples | [] | 40 + gettext-runtime | [] | 34 + gettext-tools | [] | 24 + gjay | | 8 + glunarclock | [] | 27 + gnubiff | | 9 + gnubik | | 19 + gnucash | () | 7 + gnuchess | | 10 + gnulib | | 23 + gnunet | | 1 + gnunet-gtk | | 1 + gold | | 7 + gphoto2 | [] | 19 + gprof | | 21 + gramadoir | | 14 + grep | [] | 31 + grub | | 21 + gsasl | [] | 19 + gss | | 17 + gst-plugins-bad | | 14 + gst-plugins-base | | 27 + gst-plugins-good | | 32 + gst-plugins-ugly | | 34 + gstreamer | [] | 31 + gtick | | 19 + gtkam | | 24 + gtkspell | [] | 48 + guix | | 3 + guix-packages | | 0 + gutenprint | | 15 + hello | [] | 30 + help2man | | 18 + help2man-texi | | 5 + hylafax | | 5 + idutils | | 14 + iso_15924 | [] | 23 + iso_3166 | [] | 58 + iso_3166_2 | | 9 + iso_4217 | [] | 28 + iso_639 | [] | 46 + iso_639_3 | | 10 + iso_639_5 | | 2 + jwhois | [] | 20 + kbd | | 16 + klavaro | | 30 + latrine | | 7 + ld | [] | 15 + leafpad | [] | 40 + libc | [] | 24 + libexif | | 9 + libextractor | | 5 + libgnutls | | 13 + libgphoto2 | | 9 + libgphoto2_port | [] | 19 + libgsasl | | 18 + libiconv | [] | 29 + libidn | | 17 + liferea | | 29 + lilypond | | 11 + lordsawar | | 3 + lprng | | 3 + lynx | | 19 + m4 | [] | 22 + mailfromd | | 4 + mailutils | | 6 + make | | 19 + man-db | | 14 + man-db-manpages | | 9 + midi-instruments | [] | 43 + minicom | [] | 17 + mkisofs | | 13 + myserver | | 9 + nano | [] | 29 + opcodes | | 12 + parted | [] | 21 + pies | | 4 + popt | [] | 36 + procps-ng | | 5 + procps-ng-man | | 4 + psmisc | [] | 22 + pspp | | 13 + pushover | | 6 + pwdutils | | 8 + pyspread | | 6 + radius | | 9 + recode | | 31 + recutils | | 9 + rpm | [] | 13 + rush | | 10 + sarg | | 4 + sed | [] | 34 + sharutils | | 12 + shishi | | 7 + skribilo | | 4 + solfege | | 19 + solfege-manual | | 9 + spotmachine | | 10 + sudo | | 24 + sudoers | | 20 + sysstat | | 22 + tar | [] | 30 + texinfo | | 17 + texinfo_document | | 11 + tigervnc | | 11 + tin | [] | 7 + tin-man | | 1 + tracgoogleappsa... | [] | 22 + trader | | 11 + util-linux | | 12 + ve | | 14 + vice | | 1 + vmm | | 3 + vorbis-tools | | 13 + wastesedge | | 2 + wcd | | 8 + wcd-man | | 3 + wdiff | [] | 23 + wget | | 19 + wyslij-po | | 14 + xboard | | 9 + xdg-user-dirs | [] | 68 + xkeyboard-config | [] | 27 + +-------+ + 90 teams zh_TW + 166 domains 42 2748 + + Some counters in the preceding matrix are higher than the number of +visible blocks let us expect. This is because a few extra PO files are +used for implementing regional variants of languages, or language +dialects. + + For a PO file in the matrix above to be effective, the package to +which it applies should also have been internationalized and distributed +as such by its maintainer. There might be an observable lag between the +mere existence a PO file and its wide availability in a distribution. + + If Jun 2014 seems to be old, you may fetch a more recent copy of this +'ABOUT-NLS' file on most GNU archive sites. The most up-to-date matrix +with full percentage details can be found at +'http://translationproject.org/extra/matrix.html'. + +1.5 Using 'gettext' in new packages +=================================== + +If you are writing a freely available program and want to +internationalize it you are welcome to use GNU 'gettext' in your +package. Of course you have to respect the GNU Lesser General Public +License which covers the use of the GNU 'gettext' library. This means +in particular that even non-free programs can use 'libintl' as a shared +library, whereas only free software can use 'libintl' as a static +library or use modified versions of 'libintl'. + + Once the sources are changed appropriately and the setup can handle +the use of 'gettext' the only thing missing are the translations. The +Free Translation Project is also available for packages which are not +developed inside the GNU project. Therefore the information given above +applies also for every other Free Software Project. Contact +'coordinator@translationproject.org' to make the '.pot' files available +to the translation teams. diff -Nru parlatype-1.5.4/aclocal.m4 parlatype-1.5.6/aclocal.m4 --- parlatype-1.5.4/aclocal.m4 2017-11-19 15:49:24.000000000 +0000 +++ parlatype-1.5.6/aclocal.m4 2018-08-17 10:45:08.000000000 +0000 @@ -1,6 +1,6 @@ -# generated automatically by aclocal 1.14.1 -*- Autoconf -*- +# generated automatically by aclocal 1.15 -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -105,19 +105,19 @@ ) # nls.m4 serial 5 (gettext-0.18) -dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014 Free Software Foundation, -dnl Inc. +dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016 Free Software +dnl Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl -dnl This file can can be used in projects which are not available under +dnl This file can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. +dnl gettext package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: @@ -137,32 +137,63 @@ AC_SUBST([USE_NLS]) ]) -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 1 (pkg-config-0.24) -# -# Copyright © 2004 Scott James Remnant . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- +dnl pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +dnl serial 11 (pkg-config-0.29) +dnl +dnl Copyright © 2004 Scott James Remnant . +dnl Copyright © 2012-2015 Dan Nicholson +dnl +dnl This program is free software; you can redistribute it and/or modify +dnl it under the terms of the GNU General Public License as published by +dnl the Free Software Foundation; either version 2 of the License, or +dnl (at your option) any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl General Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License +dnl along with this program; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +dnl 02111-1307, USA. +dnl +dnl As a special exception to the GNU General Public License, if you +dnl distribute this file as part of a program that contains a +dnl configuration script generated by Autoconf, you may include it under +dnl the same distribution terms that you use for the rest of that +dnl program. + +dnl PKG_PREREQ(MIN-VERSION) +dnl ----------------------- +dnl Since: 0.29 +dnl +dnl Verify that the version of the pkg-config macros are at least +dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's +dnl installed version of pkg-config, this checks the developer's version +dnl of pkg.m4 when generating configure. +dnl +dnl To ensure that this macro is defined, also add: +dnl m4_ifndef([PKG_PREREQ], +dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) +dnl +dnl See the "Since" comment for each macro you use to see what version +dnl of the macros you require. +m4_defun([PKG_PREREQ], +[m4_define([PKG_MACROS_VERSION], [0.29]) +m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, + [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) +])dnl PKG_PREREQ + +dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) +dnl ---------------------------------- +dnl Since: 0.16 +dnl +dnl Search for the pkg-config tool and set the PKG_CONFIG variable to +dnl first found in the path. Checks that the version of pkg-config found +dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is +dnl used since that's the first version where most current features of +dnl pkg-config existed. AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) @@ -184,18 +215,19 @@ PKG_CONFIG="" fi fi[]dnl -])# PKG_PROG_PKG_CONFIG +])dnl PKG_PROG_PKG_CONFIG -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -# only at the first occurence in configure.ac, so if the first place -# it's called might be skipped (such as if it is within an "if", you -# have to call PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- +dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +dnl ------------------------------------------------------------------- +dnl Since: 0.18 +dnl +dnl Check to see whether a particular set of modules exists. Similar to +dnl PKG_CHECK_MODULES(), but does not set variables or print errors. +dnl +dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +dnl only at the first occurence in configure.ac, so if the first place +dnl it's called might be skipped (such as if it is within an "if", you +dnl have to call PKG_CHECK_EXISTS manually AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ @@ -205,8 +237,10 @@ $3])dnl fi]) -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- +dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +dnl --------------------------------------------- +dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting +dnl pkg_failed based on the result. m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" @@ -218,10 +252,11 @@ else pkg_failed=untried fi[]dnl -])# _PKG_CONFIG +])dnl _PKG_CONFIG -# _PKG_SHORT_ERRORS_SUPPORTED -# ----------------------------- +dnl _PKG_SHORT_ERRORS_SUPPORTED +dnl --------------------------- +dnl Internal check to see if pkg-config supports short errors. AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then @@ -229,19 +264,17 @@ else _pkg_short_errors_supported=no fi[]dnl -])# _PKG_SHORT_ERRORS_SUPPORTED +])dnl _PKG_SHORT_ERRORS_SUPPORTED -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) -# -# -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- +dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +dnl [ACTION-IF-NOT-FOUND]) +dnl -------------------------------------------------------------- +dnl Since: 0.4.0 +dnl +dnl Note that if there is a possibility the first call to +dnl PKG_CHECK_MODULES might not happen, you should be sure to include an +dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl @@ -295,16 +328,40 @@ AC_MSG_RESULT([yes]) $3 fi[]dnl -])# PKG_CHECK_MODULES +])dnl PKG_CHECK_MODULES + + +dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +dnl [ACTION-IF-NOT-FOUND]) +dnl --------------------------------------------------------------------- +dnl Since: 0.29 +dnl +dnl Checks for existence of MODULES and gathers its build flags with +dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags +dnl and VARIABLE-PREFIX_LIBS from --libs. +dnl +dnl Note that if there is a possibility the first call to +dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to +dnl include an explicit call to PKG_PROG_PKG_CONFIG in your +dnl configure.ac. +AC_DEFUN([PKG_CHECK_MODULES_STATIC], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +_save_PKG_CONFIG=$PKG_CONFIG +PKG_CONFIG="$PKG_CONFIG --static" +PKG_CHECK_MODULES($@) +PKG_CONFIG=$_save_PKG_CONFIG[]dnl +])dnl PKG_CHECK_MODULES_STATIC -# PKG_INSTALLDIR(DIRECTORY) -# ------------------------- -# Substitutes the variable pkgconfigdir as the location where a module -# should install pkg-config .pc files. By default the directory is -# $libdir/pkgconfig, but the default can be changed by passing -# DIRECTORY. The user can override through the --with-pkgconfigdir -# parameter. +dnl PKG_INSTALLDIR([DIRECTORY]) +dnl ------------------------- +dnl Since: 0.27 +dnl +dnl Substitutes the variable pkgconfigdir as the location where a module +dnl should install pkg-config .pc files. By default the directory is +dnl $libdir/pkgconfig, but the default can be changed by passing +dnl DIRECTORY. The user can override through the --with-pkgconfigdir +dnl parameter. AC_DEFUN([PKG_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) m4_pushdef([pkg_description], @@ -315,16 +372,18 @@ AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) -]) dnl PKG_INSTALLDIR +])dnl PKG_INSTALLDIR -# PKG_NOARCH_INSTALLDIR(DIRECTORY) -# ------------------------- -# Substitutes the variable noarch_pkgconfigdir as the location where a -# module should install arch-independent pkg-config .pc files. By -# default the directory is $datadir/pkgconfig, but the default can be -# changed by passing DIRECTORY. The user can override through the -# --with-noarch-pkgconfigdir parameter. +dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) +dnl -------------------------------- +dnl Since: 0.27 +dnl +dnl Substitutes the variable noarch_pkgconfigdir as the location where a +dnl module should install arch-independent pkg-config .pc files. By +dnl default the directory is $datadir/pkgconfig, but the default can be +dnl changed by passing DIRECTORY. The user can override through the +dnl --with-noarch-pkgconfigdir parameter. AC_DEFUN([PKG_NOARCH_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) m4_pushdef([pkg_description], @@ -335,13 +394,15 @@ AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) -]) dnl PKG_NOARCH_INSTALLDIR +])dnl PKG_NOARCH_INSTALLDIR -# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, -# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# ------------------------------------------- -# Retrieves the value of the pkg-config variable for the given module. +dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, +dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +dnl ------------------------------------------- +dnl Since: 0.28 +dnl +dnl Retrieves the value of the pkg-config variable for the given module. AC_DEFUN([PKG_CHECK_VAR], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl @@ -350,7 +411,7 @@ AS_VAR_COPY([$1], [pkg_cv_][$1]) AS_VAR_IF([$1], [""], [$5], [$4])dnl -])# PKG_CHECK_VAR +])dnl PKG_CHECK_VAR AC_DEFUN([YELP_HELP_INIT], [ @@ -566,7 +627,7 @@ m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([YELP_HELP_RULES])]) ]) -# Copyright (C) 2002-2013 Free Software Foundation, Inc. +# Copyright (C) 2002-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -578,10 +639,10 @@ # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.14' +[am__api_version='1.15' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.14.1], [], +m4_if([$1], [1.15], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -597,14 +658,14 @@ # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.14.1])dnl +[AM_AUTOMAKE_VERSION([1.15])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -656,7 +717,7 @@ # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# Copyright (C) 1997-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -687,7 +748,7 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -878,7 +939,7 @@ # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -954,7 +1015,7 @@ # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1044,8 +1105,8 @@ # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl @@ -1119,6 +1180,9 @@ AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not @@ -1148,7 +1212,7 @@ done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1159,7 +1223,7 @@ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -1169,7 +1233,7 @@ fi AC_SUBST([install_sh])]) -# Copyright (C) 2003-2013 Free Software Foundation, Inc. +# Copyright (C) 2003-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1190,7 +1254,7 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1240,7 +1304,7 @@ # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# Copyright (C) 1997-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1279,7 +1343,7 @@ # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1308,7 +1372,7 @@ AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1355,7 +1419,7 @@ # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1374,7 +1438,7 @@ # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1455,7 +1519,7 @@ rm -f conftest.file ]) -# Copyright (C) 2009-2013 Free Software Foundation, Inc. +# Copyright (C) 2009-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1515,7 +1579,7 @@ _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1543,7 +1607,7 @@ INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006-2013 Free Software Foundation, Inc. +# Copyright (C) 2006-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1562,7 +1626,7 @@ # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004-2013 Free Software Foundation, Inc. +# Copyright (C) 2004-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, diff -Nru parlatype-1.5.4/compile parlatype-1.5.6/compile --- parlatype-1.5.4/compile 2017-10-12 10:56:12.000000000 +0000 +++ parlatype-1.5.6/compile 2018-04-09 18:23:15.000000000 +0000 @@ -3,7 +3,7 @@ scriptversion=2012-10-14.11; # UTC -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify diff -Nru parlatype-1.5.4/config.guess parlatype-1.5.6/config.guess --- parlatype-1.5.4/config.guess 2017-10-12 10:56:12.000000000 +0000 +++ parlatype-1.5.6/config.guess 2018-04-09 18:23:15.000000000 +0000 @@ -1,8 +1,8 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright 1992-2014 Free Software Foundation, Inc. +# Copyright 1992-2016 Free Software Foundation, Inc. -timestamp='2014-03-23' +timestamp='2016-10-02' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -24,12 +24,12 @@ # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # -# Originally written by Per Bothner. +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. # # You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess # -# Please send patches with a ChangeLog entry to config-patches@gnu.org. +# Please send patches to . me=`echo "$0" | sed -e 's,.*/,,'` @@ -50,7 +50,7 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright 1992-2014 Free Software Foundation, Inc. +Copyright 1992-2016 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -168,19 +168,29 @@ # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + /sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || \ + echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; + earmv*) + arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'` + machine=${arch}${endian}-unknown + ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. + # to ELF recently (or will in the future) and ABI. case "${UNAME_MACHINE_ARCH}" in + earm*) + os=netbsdelf + ;; arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ @@ -197,6 +207,13 @@ os=netbsd ;; esac + # Determine ABI tags. + case "${UNAME_MACHINE_ARCH}" in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"` + ;; + esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need @@ -207,13 +224,13 @@ release='-gnu' ;; *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" + echo "${machine}-${os}${release}${abi}" exit ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` @@ -223,6 +240,10 @@ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; + *:LibertyBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE} + exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; @@ -235,6 +256,9 @@ *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; + *:Sortix:*:*) + echo ${UNAME_MACHINE}-unknown-sortix + exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) @@ -251,42 +275,42 @@ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") - UNAME_MACHINE="alpha" ;; + UNAME_MACHINE=alpha ;; "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; + UNAME_MACHINE=alpha ;; "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; + UNAME_MACHINE=alpha ;; "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; + UNAME_MACHINE=alphaev5 ;; "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; + UNAME_MACHINE=alphaev56 ;; "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; + UNAME_MACHINE=alphapca56 ;; "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; + UNAME_MACHINE=alphapca57 ;; "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; + UNAME_MACHINE=alphaev6 ;; "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; + UNAME_MACHINE=alphaev67 ;; "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; + UNAME_MACHINE=alphaev68 ;; "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; + UNAME_MACHINE=alphaev68 ;; "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; + UNAME_MACHINE=alphaev68 ;; "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; + UNAME_MACHINE=alphaev69 ;; "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; + UNAME_MACHINE=alphaev7 ;; "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; + UNAME_MACHINE=alphaev79 ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` # Reset EXIT trap before exiting to avoid spurious non-zero exit code. exitcode=$? trap '' 0 @@ -359,16 +383,16 @@ exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build - SUN_ARCH="i386" + SUN_ARCH=i386 # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then - SUN_ARCH="x86_64" + SUN_ARCH=x86_64 fi fi echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` @@ -393,7 +417,7 @@ exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} @@ -579,8 +603,9 @@ else IBM_ARCH=powerpc fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi @@ -617,13 +642,13 @@ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 + 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + 32) HP_ARCH=hppa2.0n ;; + 64) HP_ARCH=hppa2.0w ;; + '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 esac ;; esac fi @@ -662,11 +687,11 @@ exit (0); } EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac - if [ ${HP_ARCH} = "hppa2.0w" ] + if [ ${HP_ARCH} = hppa2.0w ] then eval $set_cc_for_build @@ -679,12 +704,12 @@ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then - HP_ARCH="hppa2.0w" + HP_ARCH=hppa2.0w else - HP_ARCH="hppa64" + HP_ARCH=hppa64 fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} @@ -789,14 +814,14 @@ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) @@ -878,7 +903,7 @@ exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix @@ -901,7 +926,7 @@ EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC="gnulibc1" ; fi + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arc:Linux:*:* | arceb:Linux:*:*) @@ -932,6 +957,9 @@ crisv32:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; + e2k:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; frv:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; @@ -944,6 +972,9 @@ ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; + k1om:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; @@ -969,6 +1000,9 @@ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } ;; + mips64el:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; openrisc*:Linux:*:*) echo or1k-unknown-linux-${LIBC} exit ;; @@ -1001,6 +1035,9 @@ ppcle:Linux:*:*) echo powerpcle-unknown-linux-${LIBC} exit ;; + riscv32:Linux:*:* | riscv64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux-${LIBC} exit ;; @@ -1020,7 +1057,7 @@ echo ${UNAME_MACHINE}-dec-linux-${LIBC} exit ;; x86_64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-pc-linux-${LIBC} exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} @@ -1099,7 +1136,7 @@ # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configury will decide that + # prints for the "djgpp" host, or else GDB configure will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; @@ -1248,6 +1285,9 @@ SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; + SX-ACE:SUPER-UX:*:*) + echo sxace-nec-superux${UNAME_RELEASE} + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; @@ -1261,9 +1301,9 @@ UNAME_PROCESSOR=powerpc fi if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in @@ -1285,7 +1325,7 @@ exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then + if test "$UNAME_PROCESSOR" = x86; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi @@ -1316,7 +1356,7 @@ # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. - if test "$cputype" = "386"; then + if test "$cputype" = 386; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" @@ -1358,7 +1398,7 @@ echo i386-pc-xenix exit ;; i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'` exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos @@ -1369,23 +1409,25 @@ x86_64:VMkernel:*:*) echo ${UNAME_MACHINE}-unknown-esx exit ;; + amd64:Isilon\ OneFS:*:*) + echo x86_64-unknown-onefs + exit ;; esac cat >&2 < in order to provide the needed -information to handle your system. +If $0 has already been updated, send the following data and any +information you think might be pertinent to config-patches@gnu.org to +provide the necessary information to handle your system. config.guess timestamp = $timestamp diff -Nru parlatype-1.5.4/config.h.in parlatype-1.5.6/config.h.in --- parlatype-1.5.4/config.h.in 2017-11-19 15:49:35.000000000 +0000 +++ parlatype-1.5.6/config.h.in 2018-08-17 10:45:51.000000000 +0000 @@ -36,8 +36,7 @@ /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H -/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ +/* Define to the sub-directory where libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Name of package */ diff -Nru parlatype-1.5.4/config.sub parlatype-1.5.6/config.sub --- parlatype-1.5.4/config.sub 2017-10-12 10:56:12.000000000 +0000 +++ parlatype-1.5.6/config.sub 2018-04-09 18:23:15.000000000 +0000 @@ -1,8 +1,8 @@ #! /bin/sh # Configuration validation subroutine script. -# Copyright 1992-2014 Free Software Foundation, Inc. +# Copyright 1992-2016 Free Software Foundation, Inc. -timestamp='2014-09-11' +timestamp='2016-11-04' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -25,7 +25,7 @@ # of the GNU General Public License, version 3 ("GPLv3"). -# Please send patches with a ChangeLog entry to config-patches@gnu.org. +# Please send patches to . # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. @@ -33,7 +33,7 @@ # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases @@ -53,8 +53,7 @@ me=`echo "$0" | sed -e 's,.*/,,'` usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS +Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS Canonicalize a configuration name. @@ -68,7 +67,7 @@ version="\ GNU config.sub ($timestamp) -Copyright 1992-2014 Free Software Foundation, Inc. +Copyright 1992-2016 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -117,8 +116,8 @@ case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | \ - kopensolaris*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ + kopensolaris*-gnu* | cloudabi*-eabi* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` @@ -255,12 +254,13 @@ | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ + | ba \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ | d10v | d30v | dlx | dsp16xx \ - | epiphany \ - | fido | fr30 | frv \ + | e2k | epiphany \ + | fido | fr30 | frv | ft32 \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ | i370 | i860 | i960 | ia64 \ @@ -301,11 +301,12 @@ | open8 | or1k | or1knd | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pru \ | pyramid \ | riscv32 | riscv64 \ | rl78 | rx \ | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ @@ -313,6 +314,7 @@ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | visium \ | we32k \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) @@ -327,6 +329,9 @@ c6x) basic_machine=tic6x-unknown ;; + leon|leon[3-9]) + basic_machine=sparc-$basic_machine + ;; m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) basic_machine=$basic_machine-unknown os=-none @@ -372,12 +377,13 @@ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ + | ba-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | c8051-* | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ + | e2k-* | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ @@ -423,13 +429,15 @@ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pru-* \ | pyramid-* \ + | riscv32-* | riscv64-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ @@ -437,6 +445,7 @@ | ubicom32-* \ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ | vax-* \ + | visium-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ @@ -513,6 +522,9 @@ basic_machine=i386-pc os=-aros ;; + asmjs) + basic_machine=asmjs-unknown + ;; aux) basic_machine=m68k-apple os=-aux @@ -633,6 +645,14 @@ basic_machine=m68k-bull os=-sysv3 ;; + e500v[12]) + basic_machine=powerpc-unknown + os=$os"spe" + ;; + e500v[12]-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + os=$os"spe" + ;; ebmon29k) basic_machine=a29k-amd os=-ebmon @@ -774,6 +794,9 @@ basic_machine=m68k-isi os=-sysv ;; + leon-*|leon[3-9]-*) + basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` + ;; m68knommu) basic_machine=m68k-unknown os=-linux @@ -1009,7 +1032,7 @@ ppc-* | ppcbe-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - ppcle | powerpclittle | ppc-le | powerpc-little) + ppcle | powerpclittle) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) @@ -1019,7 +1042,7 @@ ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) + ppc64le | powerpc64little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) @@ -1365,18 +1388,18 @@ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* \ + | -aos* | -aros* | -cloudabi* | -sortix* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -bitrig* | -openbsd* | -solidbsd* \ + | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ @@ -1385,7 +1408,8 @@ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*) + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ + | -onefs* | -tirtos* | -phoenix* | -fuchsia*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1517,6 +1541,8 @@ ;; -nacl*) ;; + -ios) + ;; -none) ;; *) diff -Nru parlatype-1.5.4/configure parlatype-1.5.6/configure --- parlatype-1.5.4/configure 2017-11-19 15:49:27.000000000 +0000 +++ parlatype-1.5.6/configure 2018-08-17 10:45:10.000000000 +0000 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for parlatype 1.5.4. +# Generated by GNU Autoconf 2.69 for parlatype 1.5.6. # # Report bugs to . # @@ -590,8 +590,8 @@ # Identity of this package. PACKAGE_NAME='parlatype' PACKAGE_TARNAME='parlatype' -PACKAGE_VERSION='1.5.4' -PACKAGE_STRING='parlatype 1.5.4' +PACKAGE_VERSION='1.5.6' +PACKAGE_STRING='parlatype 1.5.6' PACKAGE_BUGREPORT='https://github.com/gkarsay/parlatype/issues' PACKAGE_URL='https://gkarsay.github.io/parlatype/' @@ -686,6 +686,7 @@ CXXFLAGS CXX CPP +LT_SYS_LIBRARY_PATH OTOOL64 OTOOL LIPO @@ -706,16 +707,6 @@ EGREP GREP SED -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -LIBTOOL -DATADIRNAME am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE @@ -733,6 +724,15 @@ LDFLAGS CFLAGS CC +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +LIBTOOL ALL_LINGUAS INTLTOOL_PERL GMSGFMT @@ -815,6 +815,7 @@ docdir oldincludedir includedir +runstatedir localstatedir sharedstatedir sysconfdir @@ -839,11 +840,12 @@ enable_option_checking enable_silent_rules enable_nls -enable_dependency_tracking enable_static enable_shared with_pic enable_fast_install +with_aix_soname +enable_dependency_tracking with_gnu_ld with_sysroot enable_libtool_lock @@ -863,6 +865,7 @@ LDFLAGS LIBS CPPFLAGS +LT_SYS_LIBRARY_PATH CPP CXX CXXFLAGS @@ -915,6 +918,7 @@ sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' +runstatedir='${localstatedir}/run' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' @@ -1167,6 +1171,15 @@ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; + -runstatedir | --runstatedir | --runstatedi | --runstated \ + | --runstate | --runstat | --runsta | --runst | --runs \ + | --run | --ru | --r) + ac_prev=runstatedir ;; + -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ + | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ + | --run=* | --ru=* | --r=*) + runstatedir=$ac_optarg ;; + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ @@ -1304,7 +1317,7 @@ for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir + libdir localedir mandir runstatedir do eval ac_val=\$$ac_var # Remove trailing slashes. @@ -1417,7 +1430,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures parlatype 1.5.4 to adapt to many kinds of systems. +\`configure' configures parlatype 1.5.6 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1457,6 +1470,7 @@ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] @@ -1487,7 +1501,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of parlatype 1.5.4:";; + short | recursive ) echo "Configuration of parlatype 1.5.6:";; esac cat <<\_ACEOF @@ -1498,14 +1512,14 @@ --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --disable-nls do not use Native Language Support - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build --enable-static[=PKGS] build static libraries [default=no] --enable-shared[=PKGS] build shared libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build --disable-libtool-lock avoid locking (might break parallel builds) --disable-schemas-compile Disable regeneration of gschemas.compiled on install @@ -1518,9 +1532,12 @@ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] + --with-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot=DIR Search for dependent libraries within DIR - (or the compiler's sysroot if not specified). + --with-sysroot[=DIR] Search for dependent libraries within DIR (or the + compiler's sysroot if not specified). --with-help-dir=DIR path where help files are installed --without-libreoffice don't install LibreOffice macros --with-html-dir=PATH path to installed docs @@ -1533,6 +1550,8 @@ LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory + LT_SYS_LIBRARY_PATH + User-defined run-time library search path. CPP C preprocessor CXX C++ compiler command CXXFLAGS C++ compiler flags @@ -1618,7 +1637,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -parlatype configure 1.5.4 +parlatype configure 1.5.6 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -1716,73 +1735,6 @@ } # ac_fn_c_try_link -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in @@ -1893,6 +1845,73 @@ } # ac_fn_c_try_run +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + # ac_fn_cxx_try_compile LINENO # ---------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. @@ -2108,7 +2127,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by parlatype $as_me 1.5.4, which was +It was created by parlatype $as_me 1.5.6, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2456,7 +2475,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu -am__api_version='1.14' +am__api_version='1.15' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do @@ -2677,7 +2696,7 @@ $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -2971,7 +2990,7 @@ # Define the identity of the package. PACKAGE='parlatype' - VERSION='1.5.4' + VERSION='1.5.6' cat >>confdefs.h <<_ACEOF @@ -3005,8 +3024,8 @@ # mkdir_p='$(MKDIR_P)' -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' @@ -3085,133 +3104,48 @@ $as_echo "$USE_NLS" >&6; } -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; +case "$am__api_version" in + 1.01234) + as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 + ;; + *) + ;; esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= +INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.50.2 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` +INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` +INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` +if test -n "0.50.2"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.50.2" >&5 +$as_echo_n "checking for intltool >= 0.50.2... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 +$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } + test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || + as_fn_error $? "Your intltool is too old. You need intltool 0.50.2 or later." "$LINENO" 5 fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 +# Extract the first word of "intltool-update", so it can be a program name with args. +set dummy intltool-update; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + case $INTLTOOL_UPDATE in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" + ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -3219,52 +3153,39 @@ done IFS=$as_save_IFS + ;; +esac fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } +INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE +if test -n "$INTLTOOL_UPDATE"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 +$as_echo "$INTLTOOL_UPDATE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 +# Extract the first word of "intltool-merge", so it can be a program name with args. +set dummy intltool-merge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if ${ac_cv_path_INTLTOOL_MERGE+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + case $INTLTOOL_MERGE in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" + ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -3272,44 +3193,39 @@ done IFS=$as_save_IFS + ;; +esac fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } +INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE +if test -n "$INTLTOOL_MERGE"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 +$as_echo "$INTLTOOL_MERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 +# Extract the first word of "intltool-extract", so it can be a program name with args. +set dummy intltool-extract; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + case $INTLTOOL_EXTRACT in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" + ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -3317,856 +3233,696 @@ done IFS=$as_save_IFS -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi + ;; +esac fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } +INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT +if test -n "$INTLTOOL_EXTRACT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 +$as_echo "$INTLTOOL_EXTRACT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi +if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then + as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5 fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } +if test -z "$AM_DEFAULT_VERBOSITY"; then + AM_DEFAULT_VERBOSITY=1 fi - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS +INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' +INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' +INTLTOOL__v_MERGE_0='@echo " ITMRG " $@;' -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - test -n "$ac_ct_CC" && break -done - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi +INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' +intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' +intltool__v_merge_options_0='-q' -fi -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; + INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' +INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@' + INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' +INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' +if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then + INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@' +else + INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir' +fi + INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# Check the gettext tools to make sure they are GNU +# Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_XGETTEXT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $XGETTEXT in + [\\/]* | ?:[\\/]*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 +fi +XGETTEXT=$ac_cv_path_XGETTEXT +if test -n "$XGETTEXT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 +$as_echo "$XGETTEXT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +# Extract the first word of "msgmerge", so it can be a program name with args. +set dummy msgmerge; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_MSGMERGE+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MSGMERGE in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } done + done +IFS=$as_save_IFS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ + ;; +esac +fi +MSGMERGE=$ac_cv_path_MSGMERGE +if test -n "$MSGMERGE"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 +$as_echo "$MSGMERGE" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -int -main () -{ - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +# Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_MSGFMT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + ;; +esac +fi +MSGFMT=$ac_cv_path_MSGFMT +if test -n "$MSGFMT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 +$as_echo "$MSGFMT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -ac_rmfiles= -for ac_file in $ac_files + +# Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GMSGFMT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GMSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done -rm -f $ac_rmfiles + done +IFS=$as_save_IFS -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' +fi +GMSGFMT=$ac_cv_path_GMSGFMT +if test -n "$GMSGFMT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 +$as_echo "$GMSGFMT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then + as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 +fi +xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" +mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" +mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" +if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then + as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 +fi + +# Extract the first word of "perl", so it can be a program name with args. +set dummy perl; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_INTLTOOL_PERL+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $INTLTOOL_PERL in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done -test "$ac_cv_exeext" = no && ac_cv_exeext= + done +IFS=$as_save_IFS + ;; +esac +fi +INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL +if test -n "$INTLTOOL_PERL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 +$as_echo "$INTLTOOL_PERL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +if test -z "$INTLTOOL_PERL"; then + as_fn_error $? "perl not found" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 +$as_echo_n "checking for perl >= 5.8.1... " >&6; } +$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 +if test $? -ne 0; then + as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5 else - ac_file='' + IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 +$as_echo "$IT_PERL_VERSION" >&6; } +fi +if test "x" != "xno-xml"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 +$as_echo_n "checking for XML::Parser... " >&6; } + if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } + else + as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5 + fi fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } +# Substitute ALL_LINGUAS so we can use it in po/Makefile + + + + + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=0;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : + + +macro_version='2.4.6' +macro_revision='2.4.6' + + + + + + + + + + + + + +ltmain=$ac_aux_dir/ltmain.sh + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build else - ac_compiler_gnu=no + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -int -main () -{ +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' -int -main () -{ +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () { -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; + $ECHO "" } -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +case $ECHO in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; esac -if test "x$ac_cv_prog_cc_c89" != xno; then : -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -depcc="$CC" am_compiler_list= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf -case "$am__api_version" in - 1.01234) - as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 - ;; - *) - ;; -esac +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi -INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.50.2 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` -INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -if test -n "0.50.2"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.50.2" >&5 -$as_echo_n "checking for intltool >= 0.50.2... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 -$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } - test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || - as_fn_error $? "Your intltool is too old. You need intltool 0.50.2 or later." "$LINENO" 5 +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + -# Extract the first word of "intltool-update", so it can be a program name with args. -set dummy intltool-update; ac_word=$2 +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then : +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else - case $INTLTOOL_UPDATE in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" + ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -4174,39 +3930,39 @@ done IFS=$as_save_IFS - ;; -esac fi -INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE -if test -n "$INTLTOOL_UPDATE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 -$as_echo "$INTLTOOL_UPDATE" >&6; } +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -# Extract the first word of "intltool-merge", so it can be a program name with args. -set dummy intltool-merge; ac_word=$2 +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_MERGE+:} false; then : +if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else - case $INTLTOOL_MERGE in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" + ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -4214,39 +3970,52 @@ done IFS=$as_save_IFS - ;; -esac fi -INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE -if test -n "$INTLTOOL_MERGE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 -$as_echo "$INTLTOOL_MERGE" >&6; } +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi -# Extract the first word of "intltool-extract", so it can be a program name with args. -set dummy intltool-extract; ac_word=$2 +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then : +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else - case $INTLTOOL_EXTRACT in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" + ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -4254,646 +4023,857 @@ done IFS=$as_save_IFS - ;; -esac fi -INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT -if test -n "$INTLTOOL_EXTRACT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 -$as_echo "$INTLTOOL_EXTRACT" >&6; } +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then - as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5 -fi - -if test -z "$AM_DEFAULT_VERBOSITY"; then - AM_DEFAULT_VERBOSITY=1 + fi fi - - -INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' -INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' -INTLTOOL__v_MERGE_0='@echo " ITMRG " $@;' - - - - -INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' -intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' -intltool__v_merge_options_0='-q' - - - - - INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@' - INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@' +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir' -fi - INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + test -n "$ac_ct_CC" && break +done + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi +fi +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int +main () +{ + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } -# Check the gettext tools to make sure they are GNU -# Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XGETTEXT+:} false; then : +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else - case $XGETTEXT in - [\\/]* | ?:[\\/]*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - ;; +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac -fi -XGETTEXT=$ac_cv_path_XGETTEXT -if test -n "$XGETTEXT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 -$as_echo "$XGETTEXT" >&6; } +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int +main () +{ +#ifndef __GNUC__ + choke me +#endif -# Extract the first word of "msgmerge", so it can be a program name with args. -set dummy msgmerge; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGMERGE+:} false; then : - $as_echo_n "(cached) " >&6 + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes else - case $MSGMERGE in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu - ;; -esac fi -MSGMERGE=$ac_cv_path_MSGMERGE -if test -n "$MSGMERGE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 -$as_echo "$MSGMERGE" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + GCC= fi - - -# Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGFMT+:} false; then : +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else - case $MSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ - ;; -esac -fi -MSGFMT=$ac_cv_path_MSGFMT -if test -n "$MSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 -$as_echo "$MSGFMT" >&6; } + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int +main () +{ -# Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GMSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 -$as_echo "$GMSGFMT" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int +main () +{ -if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then - as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes fi -xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" -mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" -mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" -if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then - as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - -# Extract the first word of "perl", so it can be a program name with args. -set dummy perl; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_PERL+:} false; then : - $as_echo_n "(cached) " >&6 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi else - case $INTLTOOL_PERL in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= fi -done - done -IFS=$as_save_IFS - - ;; -esac fi -INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL -if test -n "$INTLTOOL_PERL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 -$as_echo "$INTLTOOL_PERL" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; -if test -z "$INTLTOOL_PERL"; then - as_fn_error $? "perl not found" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 -$as_echo_n "checking for perl >= 5.8.1... " >&6; } -$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 -if test $? -ne 0; then - as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5 -else - IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 -$as_echo "$IT_PERL_VERSION" >&6; } +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg fi -if test "x" != "xno-xml"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 -$as_echo_n "checking for XML::Parser... " >&6; } - if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } - else - as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5 - fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : -# Substitute ALL_LINGUAS so we can use it in po/Makefile +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Set DATADIRNAME correctly if it is not set yet -# (copied from glib-gettext.m4) -if test -z "$DATADIRNAME"; then +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { -extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr + ; return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : - DATADIRNAME=share -else - case $host in - *-*-solaris*) - ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" -if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : - DATADIRNAME=share -else - DATADIRNAME=lib -fi - - ;; - *) - DATADIRNAME=lib - ;; - esac + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +depcc="$CC" am_compiler_list= - - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=0;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.4.2' -macro_revision='1.3337' - - - - - - - - - - - - - -ltmain="$ac_aux_dir/ltmain.sh" - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build + cd .. + rm -rf conftest.dir else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 + am_cv_CC_dependencies_compiler_type=none fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= fi -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case "$ECHO" in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } @@ -5196,19 +5176,19 @@ # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld -if test "$GCC" = yes; then +if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw + # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; @@ -5222,7 +5202,7 @@ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done - test -z "$LD" && LD="$ac_prog" + test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. @@ -5233,7 +5213,7 @@ with_gnu_ld=unknown ;; esac -elif test "$with_gnu_ld" = yes; then +elif test yes = "$with_gnu_ld"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else @@ -5244,32 +5224,32 @@ $as_echo_n "(cached) " >&6 else if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } @@ -5312,33 +5292,38 @@ else if test -n "$NM"; then # Let the user override the test. - lt_cv_path_NM="$NM" + lt_cv_path_NM=$NM else - lt_nm_to_check="${ac_tool_prefix}nm" + lt_nm_to_check=${ac_tool_prefix}nm if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" - break + break 2 ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" - break + break 2 ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but @@ -5349,15 +5334,15 @@ esac fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : @@ -5463,9 +5448,9 @@ fi fi - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) - DUMPBIN="$DUMPBIN -symbols" + DUMPBIN="$DUMPBIN -symbols -headers" ;; *) DUMPBIN=: @@ -5473,8 +5458,8 @@ esac fi - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" + if test : != "$DUMPBIN"; then + NM=$DUMPBIN fi fi test -z "$NM" && NM=nm @@ -5525,7 +5510,7 @@ $as_echo_n "(cached) " >&6 else i=0 - teststring="ABCD" + teststring=ABCD case $build_os in msdosdjgpp*) @@ -5565,7 +5550,7 @@ lt_cv_sys_max_cmd_len=8192; ;; - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` @@ -5616,22 +5601,22 @@ *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then + test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do + for i in 1 2 3 4 5 6 7 8; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough + test 17 != "$i" # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring @@ -5649,7 +5634,7 @@ fi -if test -n $lt_cv_sys_max_cmd_len ; then +if test -n "$lt_cv_sys_max_cmd_len"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else @@ -5667,30 +5652,6 @@ : ${MV="mv -f"} : ${RM="rm -f"} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -$as_echo "$xsi_shell" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -$as_echo "$lt_shell_append" >&6; } - - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else @@ -5813,13 +5774,13 @@ reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then + if test yes != "$GCC"; then reload_cmds=false fi ;; darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + if test yes = "$GCC"; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi @@ -5947,13 +5908,13 @@ # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. +# 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) @@ -5980,8 +5941,7 @@ # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else @@ -6077,8 +6037,8 @@ lt_cv_deplibs_check_method=pass_all ;; -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' @@ -6131,6 +6091,9 @@ tpf*) lt_cv_deplibs_check_method=pass_all ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; esac fi @@ -6288,8 +6251,8 @@ case $host_os in cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib @@ -6301,7 +6264,7 @@ ;; *) # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" + lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac @@ -6317,6 +6280,7 @@ + if test -n "$ac_tool_prefix"; then for ac_prog in ar do @@ -6455,7 +6419,7 @@ ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } - if test "$ac_status" -eq 0; then + if test 0 -eq "$ac_status"; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 @@ -6463,7 +6427,7 @@ ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } - if test "$ac_status" -ne 0; then + if test 0 -ne "$ac_status"; then lt_cv_ar_at_file=@ fi fi @@ -6476,7 +6440,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } -if test "x$lt_cv_ar_at_file" = xno; then +if test no = "$lt_cv_ar_at_file"; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file @@ -6693,7 +6657,7 @@ if test -n "$RANLIB"; then case $host_os in - openbsd*) + bitrig* | openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) @@ -6783,7 +6747,7 @@ symcode='[ABCDGISTW]' ;; hpux*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then symcode='[ABCDEGRST]' fi ;; @@ -6816,14 +6780,44 @@ symcode='[ABCDGIRSTW]' ;; esac +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" # Handle CRLF in mingw tool chain opt_cr= @@ -6841,21 +6835,24 @@ # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" @@ -6903,11 +6900,11 @@ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST -#elif defined(__osf__) +#elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else @@ -6933,7 +6930,7 @@ { { "@PROGRAM@", (void *) 0 }, _LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; @@ -6953,13 +6950,13 @@ mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" + LIBS=conftstm.$ac_objext CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then + test $ac_status = 0; } && test -s conftest$ac_exeext; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS @@ -6980,7 +6977,7 @@ rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then + if test yes = "$pipe_works"; then break else lt_cv_sys_global_symbol_pipe= @@ -7033,6 +7030,16 @@ + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } @@ -7045,9 +7052,9 @@ lt_sysroot= -case ${with_sysroot} in #( +case $with_sysroot in #( yes) - if test "$GCC" = yes; then + if test yes = "$GCC"; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( @@ -7057,8 +7064,8 @@ no|'') ;; #( *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -$as_echo "${with_sysroot}" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 +$as_echo "$with_sysroot" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac @@ -7070,18 +7077,99 @@ +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 +$as_echo_n "checking for a working dd... " >&6; } +if ${ac_cv_path_lt_DD+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +if test -z "$lt_DD"; then + ac_path_lt_DD_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in dd; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_lt_DD" || continue +if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi + $ac_path_lt_DD_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_lt_DD"; then + : + fi +else + ac_cv_path_lt_DD=$lt_DD +fi + +rm -f conftest.i conftest2.i conftest.out +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 +$as_echo "$ac_cv_path_lt_DD" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 +$as_echo_n "checking how to truncate binary pipes... " >&6; } +if ${lt_cv_truncate_bin+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 +$as_echo "$lt_cv_truncate_bin" >&6; } + + + + + + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +test no = "$enable_libtool_lock" || enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -7090,24 +7178,25 @@ test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) - HPUX_IA64_MODE="32" + HPUX_IA64_MODE=32 ;; *ELF-64*) - HPUX_IA64_MODE="64" + HPUX_IA64_MODE=64 ;; esac fi rm -rf conftest* ;; *-*-irix6*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" @@ -7136,9 +7225,50 @@ rm -rf conftest* ;; +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -7161,10 +7291,10 @@ ;; esac ;; - powerpc64le-*) + powerpc64le-*linux*) LD="${LD-ld} -m elf32lppclinux" ;; - powerpc64-*) + powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) @@ -7183,10 +7313,10 @@ x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; - powerpcle-*) + powerpcle-*linux*) LD="${LD-ld} -m elf64lppc" ;; - powerpc-*) + powerpc-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) @@ -7204,7 +7334,7 @@ *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" + SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } @@ -7244,13 +7374,14 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then + if test yes != "$lt_cv_cc_needs_belf"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" + CFLAGS=$SAVE_CFLAGS fi ;; *-*solaris*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -7262,7 +7393,7 @@ case $lt_cv_prog_gnu_ld in yes*) case $host in - i?86-*-solaris*) + i?86-*-solaris*|x86_64-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) @@ -7271,7 +7402,7 @@ esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD="${LD-ld}_sol2" + LD=${LD-ld}_sol2 fi ;; *) @@ -7287,7 +7418,7 @@ ;; esac -need_locks="$enable_libtool_lock" +need_locks=$enable_libtool_lock if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. @@ -7398,7 +7529,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test "x$lt_cv_path_mainfest_tool" != xyes; then +if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi @@ -7901,7 +8032,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then + if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the @@ -7919,7 +8050,7 @@ cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. - elif test -f libconftest.dylib && test $_lt_result -eq 0; then + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 @@ -7958,7 +8089,7 @@ fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 @@ -7987,7 +8118,7 @@ _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 - elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then lt_cv_ld_force_load=yes else cat conftest.err >&5 @@ -8000,32 +8131,32 @@ $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[012][,.]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then + if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= @@ -8033,6 +8164,41 @@ ;; esac +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -8327,14 +8493,14 @@ *) enable_static=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_static=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8365,14 +8531,14 @@ *) enable_shared=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_shared=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8397,14 +8563,14 @@ *) pic_mode=default # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for lt_pkg in $withval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8412,8 +8578,6 @@ fi -test -z "$pic_mode" && pic_mode=default - @@ -8429,14 +8593,14 @@ *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8450,11 +8614,63 @@ + shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[5-9]*,yes) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 +$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } + +# Check whether --with-aix-soname was given. +if test "${with_aix_soname+set}" = set; then : + withval=$with_aix_soname; case $withval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else + if ${lt_cv_with_aix_soname+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_with_aix_soname=aix +fi + + with_aix_soname=$lt_cv_with_aix_soname +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 +$as_echo "$with_aix_soname" >&6; } + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + + + + + + + # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" +LIBTOOL_DEPS=$ltmain # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' @@ -8503,7 +8719,7 @@ -if test -n "${ZSH_VERSION+set}" ; then +if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi @@ -8542,7 +8758,7 @@ # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then + if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -8553,14 +8769,14 @@ ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except MSVC, +# All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a -with_gnu_ld="$lt_cv_prog_gnu_ld" +with_gnu_ld=$lt_cv_prog_gnu_ld -old_CC="$CC" -old_CFLAGS="$CFLAGS" +old_CC=$CC +old_CFLAGS=$CFLAGS # Set sane defaults for various variables test -z "$CC" && CC=cc @@ -8569,15 +8785,8 @@ test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +func_cc_basename $compiler +cc_basename=$func_cc_basename_result # Only perform the check for file, if the check method requires it @@ -8592,22 +8801,22 @@ else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -f "$ac_dir/${ac_tool_prefix}file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : @@ -8630,13 +8839,13 @@ break fi done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } @@ -8658,22 +8867,22 @@ else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -f "$ac_dir/file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : @@ -8696,13 +8905,13 @@ break fi done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } @@ -8723,7 +8932,7 @@ # Use C for the default configuration in the libtool script -lt_save_CC="$CC" +lt_save_CC=$CC ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -8785,7 +8994,7 @@ lt_prog_compiler_no_builtin_flag= -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; @@ -8801,7 +9010,7 @@ lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" + lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -8831,7 +9040,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : @@ -8849,17 +9058,18 @@ lt_prog_compiler_static= - if test "$GCC" = yes; then + if test yes = "$GCC"; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi + lt_prog_compiler_pic='-fPIC' ;; amigaos*) @@ -8870,8 +9080,8 @@ ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac @@ -8887,6 +9097,11 @@ # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac ;; darwin* | rhapsody*) @@ -8957,7 +9172,7 @@ case $host_os in aix*) lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else @@ -8965,10 +9180,29 @@ fi ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac ;; hpux9* | hpux10* | hpux11*) @@ -8984,7 +9218,7 @@ ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' + lt_prog_compiler_static='$wl-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) @@ -8995,7 +9229,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. + # old Intel for x86_64, which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' @@ -9020,6 +9254,12 @@ lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) @@ -9117,7 +9357,7 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi @@ -9146,7 +9386,7 @@ fi case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: + # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; @@ -9178,7 +9418,7 @@ lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -9208,7 +9448,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then +if test yes = "$lt_cv_prog_compiler_pic_works"; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; @@ -9240,7 +9480,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -9259,13 +9499,13 @@ fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } -if test x"$lt_cv_prog_compiler_static_works" = xyes; then +if test yes = "$lt_cv_prog_compiler_static_works"; then : else lt_prog_compiler_static= @@ -9385,8 +9625,8 @@ -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } @@ -9398,9 +9638,9 @@ ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} need_locks=warn fi else @@ -9443,9 +9683,9 @@ # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if @@ -9460,7 +9700,7 @@ # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. - if test "$GCC" != yes; then + if test yes != "$GCC"; then with_gnu_ld=no fi ;; @@ -9468,7 +9708,7 @@ # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; - openbsd*) + openbsd* | bitrig*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) @@ -9481,7 +9721,7 @@ # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility @@ -9503,24 +9743,24 @@ esac fi - if test "$lt_use_gnu_ld_interface" = yes; then + if test yes = "$lt_use_gnu_ld_interface"; then # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' + wlarc='$wl' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='$wl--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no - case `$LD -v 2>&1` in + case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... @@ -9533,7 +9773,7 @@ case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then + if test ia64 != "$host_cpu"; then ld_shlibs=no cat <<_LT_EOF 1>&2 @@ -9552,7 +9792,7 @@ case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) @@ -9568,7 +9808,7 @@ allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else ld_shlibs=no fi @@ -9578,7 +9818,7 @@ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' + export_dynamic_flag_spec='$wl--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes @@ -9586,61 +9826,89 @@ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' link_all_deplibs=yes ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no - if test "$host_os" = linux-dietlibc; then + if test linux-dietlibc = "$host_os"; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no + && test no = "$tmp_diet" then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -9651,42 +9919,47 @@ lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in + tcc*) + export_dynamic_flag_spec='-rdynamic' + ;; xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -9700,8 +9973,8 @@ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -9719,8 +9992,8 @@ _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -9732,7 +10005,7 @@ ld_shlibs=no cat <<_LT_EOF 1>&2 -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify @@ -9747,9 +10020,9 @@ # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -9766,15 +10039,15 @@ *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac - if test "$ld_shlibs" = no; then + if test no = "$ld_shlibs"; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= @@ -9790,7 +10063,7 @@ # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported @@ -9798,34 +10071,57 @@ ;; aix[4-9]*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' - no_entry_flag="" + no_entry_flag= else # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then aix_use_runtimelinking=yes break fi done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi ;; esac @@ -9844,13 +10140,21 @@ hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes - file_list_spec='${wl}-f,' + file_list_spec='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct=no + hardcode_direct_absolute=no + ;; + esac - if test "$GCC" = yes; then + if test yes = "$GCC"; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` + collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then @@ -9869,36 +10173,42 @@ ;; esac shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' fi - link_all_deplibs=no + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' else # not using gcc - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' else - shared_flag='${wl}-bM:SRE' + shared_flag='$wl-bM:SRE' fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' fi fi - export_dynamic_flag_spec='${wl}-bexpall' + export_dynamic_flag_spec='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : @@ -9933,7 +10243,7 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" + lt_cv_aix_libpath_=/usr/lib:/lib fi fi @@ -9941,17 +10251,17 @@ aix_libpath=$lt_cv_aix_libpath_ fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : @@ -9986,7 +10296,7 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" + lt_cv_aix_libpath_=/usr/lib:/lib fi fi @@ -9994,21 +10304,33 @@ aix_libpath=$lt_cv_aix_libpath_ fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then + no_undefined_flag=' $wl-bernotok' + allow_undefined_flag=' $wl-berok' + if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' fi fi ;; @@ -10017,7 +10339,7 @@ case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) @@ -10047,16 +10369,17 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes @@ -10065,18 +10388,18 @@ # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' ;; *) # Assume MSVC wrapper @@ -10085,7 +10408,7 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. @@ -10104,24 +10427,24 @@ hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" + allow_undefined_flag=$_lt_dar_allow_undefined case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; + ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac - if test "$_lt_dar_can_shared" = "yes"; then + if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" else ld_shlibs=no @@ -10163,33 +10486,33 @@ ;; hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + if test yes = "$GCC"; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test yes,no = "$GCC,$with_gnu_ld"; then + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes @@ -10197,25 +10520,25 @@ ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test yes,no = "$GCC,$with_gnu_ld"; then case $host_cpu in hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) @@ -10227,7 +10550,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -10246,14 +10569,14 @@ fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +if test yes = "$lt_cv_prog_compiler__b"; then + archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi @@ -10261,8 +10584,8 @@ ;; esac fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: case $host_cpu in @@ -10273,7 +10596,7 @@ *) hardcode_direct=yes hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. @@ -10284,8 +10607,8 @@ ;; irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. @@ -10295,8 +10618,8 @@ if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } @@ -10308,24 +10631,35 @@ fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + if test yes = "$lt_cv_irix_exported_symbol"; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi + link_all_deplibs=no else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + ld_shlibs=yes + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out @@ -10340,7 +10674,7 @@ newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; @@ -10348,27 +10682,19 @@ *nto* | *qnx*) ;; - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' fi else ld_shlibs=no @@ -10379,33 +10705,53 @@ hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes ;; osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' fi archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' @@ -10416,24 +10762,24 @@ solaris*) no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + wlarc='$wl' + archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + wlarc='$wl' + archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi @@ -10443,11 +10789,11 @@ solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', + # but understands '-z linker_flag'. GCC discards it without '$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + if test yes = "$GCC"; then + whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi @@ -10457,10 +10803,10 @@ ;; sunos4*) - if test "x$host_vendor" = xsequent; then + if test sequent = "$host_vendor"; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -10509,43 +10855,43 @@ ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' + no_undefined_flag='$wl-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not + # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' + no_undefined_flag='$wl-z,text' + allow_undefined_flag='$wl-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_flag_spec='$wl-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' + export_dynamic_flag_spec='$wl-Bexport' runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; @@ -10560,10 +10906,10 @@ ;; esac - if test x$host_vendor = xsni; then + if test sni = "$host_vendor"; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' + export_dynamic_flag_spec='$wl-Blargedynsym' ;; esac fi @@ -10571,7 +10917,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no +test no = "$ld_shlibs" && can_build_shared=no with_gnu_ld=$with_gnu_ld @@ -10597,7 +10943,7 @@ # Assume -lc should be added archive_cmds_need_lc=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then + if test yes,yes = "$GCC,$enable_shared"; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. @@ -10812,14 +11158,14 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; + mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in @@ -10835,28 +11181,35 @@ ;; esac # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. + # and add multilib dir if necessary... lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; + lt_foo = "/" $lt_i lt_foo; } else { lt_count--; } @@ -10870,7 +11223,7 @@ # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; + $SED 's|/\([A-Za-z]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else @@ -10879,7 +11232,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext_cmds=".so" +shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -10896,14 +11249,16 @@ # flags to be left without arguments need_version=unknown + + case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' + soname_spec='$libname$release$shared_ext$major' ;; aix[4-9]*) @@ -10911,41 +11266,91 @@ need_lib_prefix=no need_version=no hardcode_into_libs=yes - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac shlibpath_var=LIBPATH fi ;; @@ -10955,18 +11360,18 @@ powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) - library_names_spec='${libname}${shared_ext}' + library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; @@ -10974,8 +11379,8 @@ bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" @@ -10987,7 +11392,7 @@ cygwin* | mingw* | pw32* | cegcc*) version_type=windows - shrext_cmds=".dll" + shrext_cmds=.dll need_version=no need_lib_prefix=no @@ -10996,8 +11401,8 @@ # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ @@ -11013,17 +11418,17 @@ case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' @@ -11032,8 +11437,8 @@ *,cl*) # Native MSVC libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' case $build_os in mingw*) @@ -11060,7 +11465,7 @@ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` @@ -11073,8 +11478,8 @@ esac # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' @@ -11087,7 +11492,7 @@ *) # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac @@ -11100,8 +11505,8 @@ version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' @@ -11114,8 +11519,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -11133,12 +11538,13 @@ version_type=freebsd-$objformat case $version_type in freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac @@ -11168,10 +11574,10 @@ need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -11189,14 +11595,15 @@ dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' @@ -11204,8 +11611,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; @@ -11214,8 +11621,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... @@ -11228,8 +11635,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -11240,7 +11647,7 @@ case $host_os in nonstopux*) version_type=nonstopux ;; *) - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix @@ -11248,8 +11655,8 @@ esac need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= @@ -11268,8 +11675,8 @@ esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; @@ -11278,13 +11685,33 @@ dynamic_linker=no ;; +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' + ;; + # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -11328,7 +11755,12 @@ # before this can be enabled. hardcode_into_libs=yes - # Append ld.so.conf contents to the search path + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" @@ -11360,12 +11792,12 @@ need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH @@ -11375,7 +11807,7 @@ newsos6) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; @@ -11384,58 +11816,68 @@ version_type=qnx need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; -openbsd*) +openbsd* | bitrig*) version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" + sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no else - shlibpath_overrides_runpath=yes + need_version=yes fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' - shrext_cmds=".dll" + version_type=windows + shrext_cmds=.dll + need_version=no need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) @@ -11446,8 +11888,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes @@ -11457,11 +11899,11 @@ sunos4*) version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes @@ -11469,8 +11911,8 @@ sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) @@ -11491,24 +11933,24 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf + version_type=sco need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' @@ -11526,7 +11968,7 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes @@ -11534,8 +11976,8 @@ uts4*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -11545,20 +11987,35 @@ esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no +test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then +if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + + + + @@ -11655,15 +12112,15 @@ hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then + test yes = "$hardcode_automatic"; then # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && + if test no != "$hardcode_direct" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && + test no != "$hardcode_minus_L"; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else @@ -11678,12 +12135,12 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then +if test relink = "$hardcode_action" || + test yes = "$inherit_rpath"; then # Fast installation is not supported enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi @@ -11693,7 +12150,7 @@ - if test "x$enable_dlopen" != xyes; then + if test yes != "$enable_dlopen"; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown @@ -11703,23 +12160,23 @@ case $host_os in beos*) - lt_cv_dlopen="load_add_on" + lt_cv_dlopen=load_add_on lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; cygwin*) - lt_cv_dlopen="dlopen" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs= ;; darwin*) - # if libdl is installed we need to link against it + # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : @@ -11757,10 +12214,10 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else - lt_cv_dlopen="dyld" + lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes @@ -11768,10 +12225,18 @@ ;; + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" + lt_cv_dlopen=shl_load else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } @@ -11810,11 +12275,11 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" + lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" + lt_cv_dlopen=dlopen else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } @@ -11853,7 +12318,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } @@ -11892,7 +12357,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } @@ -11931,7 +12396,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" + lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld fi @@ -11952,21 +12417,21 @@ ;; esac - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else + if test no = "$lt_cv_dlopen"; then enable_dlopen=no + else + enable_dlopen=yes fi case $lt_cv_dlopen in dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - save_LIBS="$LIBS" + save_LIBS=$LIBS LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 @@ -11974,7 +12439,7 @@ if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then : + if test yes = "$cross_compiling"; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -12021,9 +12486,9 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated +/* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif @@ -12053,7 +12518,7 @@ (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -12073,14 +12538,14 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } - if test "x$lt_cv_dlopen_self" = xyes; then + if test yes = "$lt_cv_dlopen_self"; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then : + if test yes = "$cross_compiling"; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -12127,9 +12592,9 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated +/* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif @@ -12159,7 +12624,7 @@ (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -12180,9 +12645,9 @@ $as_echo "$lt_cv_dlopen_self_static" >&6; } fi - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS ;; esac @@ -12226,7 +12691,7 @@ # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) - if test -n "$STRIP" ; then + if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 @@ -12254,7 +12719,7 @@ - # Report which library types will actually be built + # Report what library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 @@ -12262,13 +12727,13 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no + test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) - test "$enable_shared" = yes && enable_static=no + test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' @@ -12276,8 +12741,12 @@ ;; aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac fi ;; esac @@ -12287,7 +12756,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes + test yes = "$enable_shared" || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } @@ -12301,7 +12770,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC="$lt_save_CC" +CC=$lt_save_CC @@ -13442,15 +13911,15 @@ func_stripname_cnf () { - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + case $2 in + .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;; + *) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;; esac } # func_stripname_cnf - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then + if test -n "$CXX" && ( test no != "$CXX" && + ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || + (test g++ != "$CXX"))); then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -13629,7 +14098,7 @@ # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then +if test yes != "$_lt_caught_CXX_error"; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" @@ -13690,46 +14159,39 @@ CFLAGS=$CXXFLAGS compiler=$CC compiler_CXX=$CC - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + func_cc_basename $compiler +cc_basename=$func_cc_basename_result if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately - if test "$GXX" = yes; then + if test yes = "$GXX"; then lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' else lt_prog_compiler_no_builtin_flag_CXX= fi - if test "$GXX" = yes; then + if test yes = "$GXX"; then # Set up default GNU C++ configuration # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld -if test "$GCC" = yes; then +if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw + # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; @@ -13743,7 +14205,7 @@ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done - test -z "$LD" && LD="$ac_prog" + test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. @@ -13754,7 +14216,7 @@ with_gnu_ld=unknown ;; esac -elif test "$with_gnu_ld" = yes; then +elif test yes = "$with_gnu_ld"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else @@ -13765,32 +14227,32 @@ $as_echo_n "(cached) " >&6 else if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } @@ -13826,22 +14288,22 @@ # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + if test yes = "$with_gnu_ld"; then + archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir' + export_dynamic_flag_spec_CXX='$wl--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) - wlarc='${wl}' + wlarc='$wl' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else whole_archive_flag_spec_CXX= fi @@ -13878,18 +14340,30 @@ ld_shlibs_CXX=no ;; aix[4-9]*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' - no_entry_flag="" + no_entry_flag= else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do case $ld_flag in @@ -13899,6 +14373,13 @@ ;; esac done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi ;; esac @@ -13917,13 +14398,21 @@ hardcode_direct_absolute_CXX=yes hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes - file_list_spec_CXX='${wl}-f,' + file_list_spec_CXX='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct_CXX=no + hardcode_direct_absolute_CXX=no + ;; + esac - if test "$GXX" = yes; then + if test yes = "$GXX"; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` + collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then @@ -13941,36 +14430,44 @@ fi esac shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag=$shared_flag' $wl-G' fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' else # not using gcc - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' else - shared_flag='${wl}-bM:SRE' + shared_flag='$wl-bM:SRE' fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' fi fi - export_dynamic_flag_spec_CXX='${wl}-bexpall' + export_dynamic_flag_spec_CXX='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. always_export_symbols_CXX=yes - if test "$aix_use_runtimelinking" = yes; then + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. - allow_undefined_flag_CXX='-berok' + # The "-G" linker flag allows undefined symbols. + no_undefined_flag_CXX='-bernotok' # Determine the default libpath from the value encoded in an empty # executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath__CXX+:} false; then : @@ -14005,7 +14502,7 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX="/usr/lib:/lib" + lt_cv_aix_libpath__CXX=/usr/lib:/lib fi fi @@ -14013,18 +14510,18 @@ aix_libpath=$lt_cv_aix_libpath__CXX fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec_CXX='$wl-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath__CXX+:} false; then : @@ -14059,7 +14556,7 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX="/usr/lib:/lib" + lt_cv_aix_libpath__CXX=/usr/lib:/lib fi fi @@ -14067,22 +14564,34 @@ aix_libpath=$lt_cv_aix_libpath__CXX fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - no_undefined_flag_CXX=' ${wl}-bernotok' - allow_undefined_flag_CXX=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then + no_undefined_flag_CXX=' $wl-bernotok' + allow_undefined_flag_CXX=' $wl-berok' + if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_CXX='$convenience' fi archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + archive_expsym_cmds_CXX='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared + # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. + archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$RM -r $output_objdir/$realname.d' fi fi ;; @@ -14092,7 +14601,7 @@ allow_undefined_flag_CXX=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else ld_shlibs_CXX=no fi @@ -14120,57 +14629,58 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' + archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds_CXX='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' enable_shared_with_static_runtimes_CXX=yes # Don't use ranlib old_postinstall_cmds_CXX='chmod 644 $oldlib' postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_CXX='-L$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' + export_dynamic_flag_spec_CXX='$wl--export-all-symbols' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=no enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds_CXX='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_CXX=no fi @@ -14184,27 +14694,27 @@ hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec_CXX='' fi link_all_deplibs_CXX=yes - allow_undefined_flag_CXX="$_lt_dar_allow_undefined" + allow_undefined_flag_CXX=$_lt_dar_allow_undefined case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; + ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac - if test "$_lt_dar_can_shared" = "yes"; then + if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all - archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - if test "$lt_cv_apple_cc_single_mod" != "yes"; then - archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds_CXX="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + if test yes != "$lt_cv_apple_cc_single_mod"; then + archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" + archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" fi else @@ -14213,6 +14723,34 @@ ;; + os2*) + hardcode_libdir_flag_spec_CXX='-L$libdir' + hardcode_minus_L_CXX=yes + allow_undefined_flag_CXX=unsupported + shrext_cmds=.dll + archive_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes_CXX=yes + ;; + dgux*) case $cc_basename in ec++*) @@ -14248,14 +14786,14 @@ ;; haiku*) - archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' link_all_deplibs_CXX=yes ;; hpux9*) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir' hardcode_libdir_separator_CXX=: - export_dynamic_flag_spec_CXX='${wl}-E' + export_dynamic_flag_spec_CXX='$wl-E' hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default @@ -14267,7 +14805,7 @@ ld_shlibs_CXX=no ;; aCC*) - archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -14276,11 +14814,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes; then - archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + if test yes = "$GXX"; then + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -14290,15 +14828,15 @@ ;; hpux10*|hpux11*) - if test $with_gnu_ld = no; then - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir' hardcode_libdir_separator_CXX=: case $host_cpu in hppa*64*|ia64*) ;; *) - export_dynamic_flag_spec_CXX='${wl}-E' + export_dynamic_flag_spec_CXX='$wl-E' ;; esac fi @@ -14324,13 +14862,13 @@ aCC*) case $host_cpu in hppa*64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists @@ -14341,20 +14879,20 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then case $host_cpu in hppa*64*) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -14369,22 +14907,22 @@ interix[3-9]*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}-E' + hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir' + export_dynamic_flag_spec_CXX='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_CXX='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -14393,17 +14931,17 @@ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' fi fi link_all_deplibs_CXX=yes ;; esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir' hardcode_libdir_separator_CXX=: inherit_rpath_CXX=yes ;; @@ -14416,8 +14954,8 @@ # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -14426,10 +14964,10 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir' + export_dynamic_flag_spec_CXX='$wl--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. @@ -14443,59 +14981,59 @@ # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac - archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac archive_cmds_need_lc_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir' + export_dynamic_flag_spec_CXX='$wl--export-dynamic' + whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [1-5].* | *pgcpp\ [1-5].*) prelink_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' old_archive_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' archive_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + hardcode_libdir_flag_spec_CXX='$wl--rpath $wl$libdir' + export_dynamic_flag_spec_CXX='$wl--export-dynamic' + whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' ;; cxx*) # Compaq C++ - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_CXX='-rpath $libdir' @@ -14509,18 +15047,18 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir' + export_dynamic_flag_spec_CXX='$wl--export-dynamic' + archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + if test yes = "$supports_anon_versioning"; then archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi ;; *) @@ -14528,10 +15066,10 @@ *Sun\ C*) # Sun C++ 5.9 no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' - whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object_CXX=yes # Not sure whether something based on @@ -14589,22 +15127,17 @@ ld_shlibs_CXX=yes ;; - openbsd2*) - # C++ shared libraries are fairly broken - ld_shlibs_CXX=no - ;; - - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no hardcode_direct_absolute_CXX=yes archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - export_dynamic_flag_spec_CXX='${wl}-E' - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' + export_dynamic_flag_spec_CXX='$wl-E' + whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else @@ -14620,9 +15153,9 @@ # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using @@ -14640,17 +15173,17 @@ cxx*) case $host in osf3*) - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*' + archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir' ;; *) allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ + $RM $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' ;; esac @@ -14665,21 +15198,21 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + if test yes,no = "$GXX,$with_gnu_ld"; then + allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*' case $host in osf3*) - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; *) - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists @@ -14725,9 +15258,9 @@ # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no @@ -14735,7 +15268,7 @@ solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. + # but understands '-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' ;; @@ -14752,30 +15285,30 @@ ;; gcx*) # Green Hills C++ Compiler - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - no_undefined_flag_CXX=' ${wl}-z ${wl}defs' + if test yes,no = "$GXX,$with_gnu_ld"; then + no_undefined_flag_CXX=' $wl-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else - # g++ 2.7 appears to require `-G' NOT `-shared' on this + # g++ 2.7 appears to require '-G' NOT '-shared' on this # platform. - archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -14783,11 +15316,11 @@ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi - hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' + hardcode_libdir_flag_spec_CXX='$wl-R $wl$libdir' case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) - whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + whole_archive_flag_spec_CXX='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' ;; esac fi @@ -14796,52 +15329,52 @@ ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_CXX='${wl}-z,text' + no_undefined_flag_CXX='$wl-z,text' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) - archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not + # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - no_undefined_flag_CXX='${wl}-z,text' - allow_undefined_flag_CXX='${wl}-z,nodefs' + no_undefined_flag_CXX='$wl-z,text' + allow_undefined_flag_CXX='$wl-z,nodefs' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' + hardcode_libdir_flag_spec_CXX='$wl-R,$libdir' hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes - export_dynamic_flag_spec_CXX='${wl}-Bexport' + export_dynamic_flag_spec_CXX='$wl-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) - archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ - '"$old_archive_cmds_CXX" + '"$old_archive_cmds_CXX" reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ - '"$reload_cmds_CXX" + '"$reload_cmds_CXX" ;; *) - archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; @@ -14873,10 +15406,10 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } - test "$ld_shlibs_CXX" = no && can_build_shared=no + test no = "$ld_shlibs_CXX" && can_build_shared=no - GCC_CXX="$GXX" - LD_CXX="$LD" + GCC_CXX=$GXX + LD_CXX=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change @@ -14920,13 +15453,13 @@ pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in + case $prev$p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. - if test $p = "-L" || - test $p = "-R"; then + if test x-L = "$p" || + test x-R = "$p"; then prev=$p continue fi @@ -14942,16 +15475,16 @@ case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac - if test "$pre_test_object_deps_done" = no; then - case ${prev} in + if test no = "$pre_test_object_deps_done"; then + case $prev in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$compiler_lib_search_path_CXX"; then - compiler_lib_search_path_CXX="${prev}${p}" + compiler_lib_search_path_CXX=$prev$p else - compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" + compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} $prev$p" fi ;; # The "-l" case would never come before the object being @@ -14959,9 +15492,9 @@ esac else if test -z "$postdeps_CXX"; then - postdeps_CXX="${prev}${p}" + postdeps_CXX=$prev$p else - postdeps_CXX="${postdeps_CXX} ${prev}${p}" + postdeps_CXX="${postdeps_CXX} $prev$p" fi fi prev= @@ -14976,15 +15509,15 @@ continue fi - if test "$pre_test_object_deps_done" = no; then + if test no = "$pre_test_object_deps_done"; then if test -z "$predep_objects_CXX"; then - predep_objects_CXX="$p" + predep_objects_CXX=$p else predep_objects_CXX="$predep_objects_CXX $p" fi else if test -z "$postdep_objects_CXX"; then - postdep_objects_CXX="$p" + postdep_objects_CXX=$p else postdep_objects_CXX="$postdep_objects_CXX $p" fi @@ -15014,51 +15547,6 @@ postdep_objects_CXX= postdeps_CXX= ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - postdeps_CXX='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC* | sunCC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - postdeps_CXX='-library=Cstd -library=Crun' - fi - ;; - esac - ;; esac @@ -15067,7 +15555,7 @@ esac compiler_lib_search_dirs_CXX= if test -n "${compiler_lib_search_path_CXX}"; then - compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` + compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'` fi @@ -15106,17 +15594,18 @@ # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then + if test yes = "$GXX"; then lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-static' case $host_os in aix*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' fi + lt_prog_compiler_pic_CXX='-fPIC' ;; amigaos*) @@ -15127,8 +15616,8 @@ ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ;; esac @@ -15143,6 +15632,11 @@ # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static_CXX='$wl-static' + ;; + esac ;; darwin* | rhapsody*) # PIC is the default on this platform @@ -15192,7 +15686,7 @@ case $host_os in aix[4-9]*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' else @@ -15232,14 +15726,14 @@ case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then + lt_prog_compiler_static_CXX='$wl-a ${wl}archive' + if test ia64 != "$host_cpu"; then lt_prog_compiler_pic_CXX='+Z' fi ;; aCC*) lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + lt_prog_compiler_static_CXX='$wl-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default @@ -15276,7 +15770,7 @@ lt_prog_compiler_pic_CXX='-fPIC' ;; ecpc* ) - # old Intel C++ for x86_64 which still supported -KPIC. + # old Intel C++ for x86_64, which still supported -KPIC. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-static' @@ -15421,7 +15915,7 @@ fi case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: + # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= ;; @@ -15453,7 +15947,7 @@ lt_cv_prog_compiler_pic_works_CXX=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -15483,7 +15977,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } -if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then +if test yes = "$lt_cv_prog_compiler_pic_works_CXX"; then case $lt_prog_compiler_pic_CXX in "" | " "*) ;; *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; @@ -15509,7 +16003,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works_CXX=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -15528,13 +16022,13 @@ fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } -if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then +if test yes = "$lt_cv_prog_compiler_static_works_CXX"; then : else lt_prog_compiler_static_CXX= @@ -15648,8 +16142,8 @@ -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o_CXX" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } @@ -15661,9 +16155,9 @@ ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} need_locks=warn fi else @@ -15680,17 +16174,21 @@ case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi ;; pw32*) - export_symbols_cmds_CXX="$ltdll_cmds" + export_symbols_cmds_CXX=$ltdll_cmds ;; cygwin* | mingw* | cegcc*) case $cc_basename in @@ -15713,7 +16211,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } -test "$ld_shlibs_CXX" = no && can_build_shared=no +test no = "$ld_shlibs_CXX" && can_build_shared=no with_gnu_ld_CXX=$with_gnu_ld @@ -15730,7 +16228,7 @@ # Assume -lc should be added archive_cmds_need_lc_CXX=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then + if test yes,yes = "$GCC,$enable_shared"; then case $archive_cmds_CXX in *'~'*) # FIXME: we may have to deal with multi-command sequences. @@ -15858,7 +16356,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext_cmds=".so" +shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -15875,14 +16373,16 @@ # flags to be left without arguments need_version=unknown + + case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' + soname_spec='$libname$release$shared_ext$major' ;; aix[4-9]*) @@ -15890,41 +16390,91 @@ need_lib_prefix=no need_version=no hardcode_into_libs=yes - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac shlibpath_var=LIBPATH fi ;; @@ -15934,18 +16484,18 @@ powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) - library_names_spec='${libname}${shared_ext}' + library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; @@ -15953,8 +16503,8 @@ bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" @@ -15966,7 +16516,7 @@ cygwin* | mingw* | pw32* | cegcc*) version_type=windows - shrext_cmds=".dll" + shrext_cmds=.dll need_version=no need_lib_prefix=no @@ -15975,8 +16525,8 @@ # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ @@ -15992,16 +16542,16 @@ case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' @@ -16010,8 +16560,8 @@ *,cl*) # Native MSVC libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' case $build_os in mingw*) @@ -16038,7 +16588,7 @@ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` @@ -16051,8 +16601,8 @@ esac # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' @@ -16065,7 +16615,7 @@ *) # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac @@ -16078,8 +16628,8 @@ version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' @@ -16091,8 +16641,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -16110,12 +16660,13 @@ version_type=freebsd-$objformat case $version_type in freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac @@ -16145,10 +16696,10 @@ need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -16166,14 +16717,15 @@ dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' @@ -16181,8 +16733,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; @@ -16191,8 +16743,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... @@ -16205,8 +16757,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -16217,7 +16769,7 @@ case $host_os in nonstopux*) version_type=nonstopux ;; *) - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix @@ -16225,8 +16777,8 @@ esac need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= @@ -16245,8 +16797,8 @@ esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; @@ -16255,13 +16807,33 @@ dynamic_linker=no ;; +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec_CXX='-L$libdir' + ;; + # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -16305,7 +16877,12 @@ # before this can be enabled. hardcode_into_libs=yes - # Append ld.so.conf contents to the search path + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" @@ -16337,12 +16914,12 @@ need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH @@ -16352,7 +16929,7 @@ newsos6) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; @@ -16361,58 +16938,68 @@ version_type=qnx need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; -openbsd*) +openbsd* | bitrig*) version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" + sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no else - shlibpath_overrides_runpath=yes + need_version=yes fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' - shrext_cmds=".dll" + version_type=windows + shrext_cmds=.dll + need_version=no need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) @@ -16423,8 +17010,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes @@ -16434,11 +17021,11 @@ sunos4*) version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes @@ -16446,8 +17033,8 @@ sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) @@ -16468,24 +17055,24 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf + version_type=sco need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' @@ -16503,7 +17090,7 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes @@ -16511,8 +17098,8 @@ uts4*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -16522,20 +17109,32 @@ esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no +test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then +if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + @@ -16578,15 +17177,15 @@ hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || test -n "$runpath_var_CXX" || - test "X$hardcode_automatic_CXX" = "Xyes" ; then + test yes = "$hardcode_automatic_CXX"; then # We can hardcode non-existent directories. - if test "$hardcode_direct_CXX" != no && + if test no != "$hardcode_direct_CXX" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && - test "$hardcode_minus_L_CXX" != no; then + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" && + test no != "$hardcode_minus_L_CXX"; then # Linking always hardcodes the temporary library directory. hardcode_action_CXX=relink else @@ -16601,12 +17200,12 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 $as_echo "$hardcode_action_CXX" >&6; } -if test "$hardcode_action_CXX" = relink || - test "$inherit_rpath_CXX" = yes; then +if test relink = "$hardcode_action_CXX" || + test yes = "$inherit_rpath_CXX"; then # Fast installation is not supported enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi @@ -16629,7 +17228,7 @@ lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes +fi # test yes != "$_lt_caught_CXX_error" ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -17429,7 +18028,8 @@ fi -# needed? +# gtk-doc only needed with --enable-gtk-doc + @@ -17801,6 +18401,7 @@ + ac_config_files="$ac_config_files Makefile data/Makefile data/icons/Makefile docs/Makefile help/Makefile libreoffice/Makefile po/Makefile.in src/Makefile" @@ -17933,6 +18534,10 @@ am__EXEEXT_FALSE= fi + + ac_config_commands="$ac_config_commands po/stamp-it" + + if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 @@ -17941,10 +18546,6 @@ as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi - - ac_config_commands="$ac_config_commands po/stamp-it" - - if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 @@ -18378,7 +18979,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by parlatype $as_me 1.5.4, which was +This file was extended by parlatype $as_me 1.5.6, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -18445,7 +19046,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -parlatype config.status 1.5.4 +parlatype config.status 1.5.6 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" @@ -18580,6 +19181,7 @@ enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' @@ -18629,10 +19231,13 @@ GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' @@ -18697,7 +19302,8 @@ finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' +configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' @@ -18802,9 +19408,12 @@ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_import \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +lt_cv_nm_interface \ nm_file_list_spec \ +lt_cv_truncate_bin \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ @@ -18870,7 +19479,7 @@ compiler_lib_search_path_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -18897,7 +19506,8 @@ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec \ +configure_time_dlsearch_path \ +configure_time_lt_sys_library_path \ reload_cmds_CXX \ old_archive_cmds_CXX \ old_archive_from_new_cmds_CXX \ @@ -18911,7 +19521,7 @@ postlink_cmds_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -18920,19 +19530,16 @@ done ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' -# See if we are running on zsh, and set the options which allow our +# See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then +if test -n "\${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' @@ -19651,55 +20258,52 @@ ;; "libtool":C) - # See if we are running on zsh, and set the options which allow our + # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then + if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi - cfgfile="${ofile}T" + cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# Generated automatically by $as_me ($PACKAGE) $VERSION # NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. # -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with this program. If not, see . # The names of the tagged configurations supported by this script. -available_tags="CXX " +available_tags='CXX ' + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} # ### BEGIN LIBTOOL CONFIG @@ -19719,6 +20323,9 @@ # Whether or not to optimize for fast installation. fast_install=$enable_fast_install +# Shared archive member basename,for filename based shared library versioning on AIX. +shared_archive_member_spec=$shared_archive_member_spec + # Shell to use when invoking shell scripts. SHELL=$lt_SHELL @@ -19836,18 +20443,27 @@ # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +# Transform the output of nm into a list of symbols to manually relocate. +global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import + # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix +# The name lister interface. +nm_interface=$lt_lt_cv_nm_interface + # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec -# The root where to search for dependent libraries,and in which our libraries should be installed. +# The root where to search for dependent libraries,and where our libraries should be installed. lt_sysroot=$lt_sysroot +# Command to truncate a binary pipe. +lt_truncate_bin=$lt_lt_cv_truncate_bin + # The name of the directory that contains temporary libtool files. objdir=$objdir @@ -19938,8 +20554,11 @@ # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +# Detected run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path + +# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. +configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path # Whether dlopen is supported. dlopen_support=$enable_dlopen @@ -20032,13 +20651,13 @@ # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# "absolute",i.e impossible to change by setting \$shlibpath_var if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute @@ -20104,13 +20723,72 @@ _LT_EOF + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then +if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -20119,7 +20797,7 @@ esac -ltmain="$ac_aux_dir/ltmain.sh" +ltmain=$ac_aux_dir/ltmain.sh # We use sed instead of cat because bash on DJGPP gets confused if @@ -20129,165 +20807,6 @@ sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi - - mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" @@ -20374,13 +20893,13 @@ # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct_CXX -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# "absolute",i.e impossible to change by setting \$shlibpath_var if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute_CXX diff -Nru parlatype-1.5.4/configure.ac parlatype-1.5.6/configure.ac --- parlatype-1.5.4/configure.ac 2017-11-19 09:32:40.000000000 +0000 +++ parlatype-1.5.6/configure.ac 2018-08-17 10:32:01.000000000 +0000 @@ -2,7 +2,7 @@ # Process this file with autoconf to produce a configure script. AC_PREREQ([2.69]) -AC_INIT([parlatype], [1.5.4], [https://github.com/gkarsay/parlatype/issues], [parlatype], [https://gkarsay.github.io/parlatype/]) +AC_INIT([parlatype], [1.5.6], [https://github.com/gkarsay/parlatype/issues], [parlatype], [https://gkarsay.github.io/parlatype/]) AM_INIT_AUTOMAKE([-Wall -Werror foreign -Wno-portability]) AC_CONFIG_SRCDIR([src/main.c]) AC_CONFIG_HEADERS([config.h]) @@ -49,8 +49,12 @@ AM_CONDITIONAL([LIBREOFFICE], [test "$with_libreoffice" = "yes"]) -# needed? +# gtk-doc only needed with --enable-gtk-doc +m4_ifdef([GTK_DOC_CHECK], [ GTK_DOC_CHECK([1.14],[--flavour no-tmpl]) +],[ +AM_CONDITIONAL([ENABLE_GTK_DOC], false) +]) AC_CONFIG_FILES([Makefile data/Makefile diff -Nru parlatype-1.5.4/data/com.github.gkarsay.parlatype.appdata.xml.in parlatype-1.5.6/data/com.github.gkarsay.parlatype.appdata.xml.in --- parlatype-1.5.4/data/com.github.gkarsay.parlatype.appdata.xml.in 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/data/com.github.gkarsay.parlatype.appdata.xml.in 2018-08-17 10:44:22.000000000 +0000 @@ -13,11 +13,14 @@ - https://raw.githubusercontent.com/gkarsay/parlatype/master/data/screenshot.png + + https://raw.githubusercontent.com/gkarsay/parlatype/master/data/screenshot.png + https://gkarsay.github.io/parlatype/ https://github.com/gkarsay/parlatype/issues + https://translations.launchpad.net/parlatype Gabor Karsay @@ -36,5 +39,42 @@ UserDocs - gabor.karsay@gmx.at + + + +

This is a minor maintenance release.

+
    +
  • Animate scrolling when using keybindings
    • +
  • Change desktop entry category to Audio/Video instead of Utilities
    • +
  • Translation updates for French
    • +
+ + + + +

This release contains a number of bug fixes and minor improvements.

+
    +
  • Progress Dialog has now a countdown timer (estimated time left)
    • +
  • Increase max. possible speed to 2.0
    • +
  • New keyboard shortcuts for Play/Pause (Ctrl + Space), Jump back (Ctrl + Left), Jump forward (Ctrl + Right)
    • +
  • Scrolling now also possible with vertical scrollbar
    • +
  • Various fixes for waveform and cursor display
    • +
  • Translation updates for Arabic, British English, Catalan, German, Finnish, French, Japanese, Lithuanian, Polish, Spanish and Swedish
    • +
+ + + + + + + + + + + + + + + + gabor.karsay@gmx.at diff -Nru parlatype-1.5.4/data/com.github.gkarsay.parlatype.desktop.in parlatype-1.5.6/data/com.github.gkarsay.parlatype.desktop.in --- parlatype-1.5.4/data/com.github.gkarsay.parlatype.desktop.in 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/data/com.github.gkarsay.parlatype.desktop.in 2018-07-24 19:15:26.000000000 +0000 @@ -9,5 +9,5 @@ Type=Application DBusActivatable=true StartupNotify=true -Categories=Utility; +Categories=AudioVideo;Audio;Player;GTK;GNOME; MimeType=application/x-ogg;application/ogg;audio/x-vorbis+ogg;audio/x-scpls;audio/x-mp3;audio/x-mpeg;audio/mpeg;audio/x-mpegurl;audio/x-flac;audio/mp4;x-scheme-handler/itms;x-scheme-handler/itmss; diff -Nru parlatype-1.5.4/data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in parlatype-1.5.6/data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in --- parlatype-1.5.4/data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in 2018-06-17 20:35:03.000000000 +0000 @@ -9,5 +9,5 @@ https://github.com/gkarsay/parlatype/issues CC-BY-SA-4.0 GPL-3.0+ - gabor.karsay@gmx.at + gabor.karsay@gmx.at diff -Nru parlatype-1.5.4/data/icons/Makefile.in parlatype-1.5.6/data/icons/Makefile.in --- parlatype-1.5.4/data/icons/Makefile.in 2017-11-19 15:49:26.000000000 +0000 +++ parlatype-1.5.6/data/icons/Makefile.in 2018-08-17 10:45:09.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -15,7 +15,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -79,7 +89,6 @@ build_triplet = @build@ host_triplet = @host@ subdir = data/icons -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ @@ -88,6 +97,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -145,6 +155,7 @@ DATA = $(icon16_DATA) $(icon22_DATA) $(icon24_DATA) $(icon256_DATA) \ $(icon32_DATA) $(icon48_DATA) $(iconscalable_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -166,7 +177,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ @@ -217,6 +227,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -299,6 +310,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -347,7 +359,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -685,6 +696,8 @@ uninstall-icon256DATA uninstall-icon32DATA \ uninstall-icon48DATA uninstall-iconscalableDATA +.PRECIOUS: Makefile + install-data-hook: update-icon-cache uninstall-hook: update-icon-cache diff -Nru parlatype-1.5.4/data/Makefile.in parlatype-1.5.6/data/Makefile.in --- parlatype-1.5.4/data/Makefile.in 2017-11-19 15:49:26.000000000 +0000 +++ parlatype-1.5.6/data/Makefile.in 2018-08-17 10:45:09.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -15,7 +15,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -80,7 +90,6 @@ host_triplet = @host@ @LIBREOFFICE_TRUE@am__append_1 = com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in subdir = data -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ @@ -89,6 +98,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -178,6 +188,7 @@ ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -224,7 +235,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ @@ -275,6 +285,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -357,6 +368,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -402,7 +414,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -770,6 +781,8 @@ uninstall-am uninstall-appdataDATA uninstall-dbusserviceDATA \ uninstall-desktopDATA +.PRECIOUS: Makefile + @INTLTOOL_DESKTOP_RULE@ install-desktop-database: install-desktopDATA diff -Nru parlatype-1.5.4/debian/changelog parlatype-1.5.6/debian/changelog --- parlatype-1.5.4/debian/changelog 2017-11-19 15:54:16.000000000 +0000 +++ parlatype-1.5.6/debian/changelog 2018-08-17 14:31:02.000000000 +0000 @@ -1,76 +1,50 @@ -parlatype (1.5.4-0ubuntu1~trusty1) trusty; urgency=medium +parlatype (1.5.6-1ubuntu1~trusty1) trusty; urgency=medium - * New upstream release - - -- Gabor Karsay Sun, 19 Nov 2017 16:53:40 +0100 - -parlatype (1.5.3-0ubuntu1~trusty1) trusty; urgency=medium - - * New upstream release - - -- Gabor Karsay Thu, 16 Nov 2017 23:13:36 +0100 - -parlatype (1.5.2-0ubuntu1~trusty1) trusty; urgency=medium - - * New upstream bugfix release - * Update install path for help files - * Don't install AppStream data - * Update icon names (install and copyright) - * Install DBus service - * Install symbolic icon - * Copyright: change URL format to https - - -- Gabor Karsay Thu, 10 Aug 2017 17:43:18 +0200 - -parlatype (1.5.1-1) unstable; urgency=medium - - * New upstream bugfix release - * Bump standards version to 4.0.0 - * Rename gir package to match typelib name - * Add VCS fields - - -- Gabor Karsay Wed, 19 Jul 2017 15:33:34 +0200 + * Downgrade compat level to 9 for trusty + * Remove app-utils from Build-Depends + * Backport to trusty -parlatype (1.5-1) unstable; urgency=medium + -- Gabor Karsay Fri, 17 Aug 2018 16:31:02 +0200 - * New upstream release - - -- Gabor Karsay Wed, 15 Mar 2017 00:40:28 +0100 - -parlatype (1.4.1-1) jessie; urgency=medium - - * New upstream bugfix release - * Fix packaging help - - -- Gabor Karsay Mon, 31 Oct 2016 17:49:20 +0100 - -parlatype (1.4-1) jessie; urgency=medium +parlatype (1.5.6-1) unstable; urgency=medium - * New upstream release - - -- Gabor Karsay Sat, 29 Oct 2016 18:29:41 +0200 - -parlatype (1.3-1) jessie; urgency=low + * d/gbp.conf: create file with pristine-tar = TRUE + * New upstream version 1.5.6 + * d/control: bump Standards-Version to 4.2.0 (no changes) + * d/copyright: + - contract single copyright years into a range of years + - add complete legal text to CC licenses + * d/upstream/medadata: create file with metadata - * New upstream release - - -- Gabor Karsay Sun, 04 Sep 2016 19:22:06 +0200 + -- Gabor Karsay Fri, 17 Aug 2018 14:29:36 +0200 -parlatype (1.2-1) jessie; urgency=low +parlatype (1.5.5-1) unstable; urgency=medium - * New upstream release + * New upstream version 1.5.5 + * Remove patches included upstream + * d/control: move gtk-doc-tools to Build-Depends-Indep + * Bump debhelper compat level to 11 + * Add autopkgtest + * Update copyright + * Update Vcs-* to salsa.debian.org + * Bump standards version to 4.1.5 (add Rules-Requires-Root: no) - -- Gabor Karsay Sat, 13 Aug 2016 09:01:53 +0200 + -- Gabor Karsay Fri, 06 Jul 2018 20:18:51 +0200 -parlatype (1.1-1) jessie; urgency=low +parlatype (1.5.4-1) unstable; urgency=medium * New upstream release + * Apply upstream patch to fix build on hurd-i386 and kfreebsd-* + (Closes: #882517) + * Build docs architecture independent (Closes: #882520) + * Disable new upstream tests (they fail in build environment) + * Add copyright for test data + * Bump standards version to 4.1.1 (no changes needed) - -- Gabor Karsay Fri, 29 Jul 2016 15:09:32 +0200 + -- Gabor Karsay Tue, 28 Nov 2017 23:50:35 +0100 -parlatype (1.0-1) jessie; urgency=low +parlatype (1.5.2-1) unstable; urgency=medium - * Initial upstream release + * Initial release (Closes: #868886) - -- Gabor Karsay Tue, 19 Jan 2016 09:38:23 +0100 - + -- Gabor Karsay Thu, 28 Sep 2017 12:30:27 +0200 diff -Nru parlatype-1.5.4/debian/control parlatype-1.5.6/debian/control --- parlatype-1.5.4/debian/control 2017-11-19 15:53:35.000000000 +0000 +++ parlatype-1.5.6/debian/control 2018-08-17 14:31:02.000000000 +0000 @@ -4,20 +4,23 @@ Maintainer: Gabor Karsay Build-Depends: debhelper (>= 9), dh-autoreconf, + desktop-file-utils, gobject-introspection, - gtk-doc-tools, - intltool (>= 0.50.2), + intltool, libgirepository1.0-dev, libgladeui-dev (>= 3.15), - libxml2-utils, - libgtk-3-dev (>= 3.10.0), libgstreamer1.0-dev, libgstreamer-plugins-base1.0-dev, + libgtk-3-dev (>= 3.10.0), + libxml2-utils, yelp-tools -Standards-Version: 4.0.0 +Build-Depends-Indep: + gtk-doc-tools +Standards-Version: 4.2.0 Homepage: https://gkarsay.github.io/parlatype/ -Vcs-Git: https://github.com/gkarsay/parlatype-debian.git -Vcs-Browser: https://github.com/gkarsay/parlatype-debian +Vcs-Git: https://salsa.debian.org/gabork-guest/parlatype.git +Vcs-Browser: https://salsa.debian.org/gabork-guest/parlatype +Rules-Requires-Root: no Package: parlatype Architecture: any @@ -72,7 +75,7 @@ widget. Mainly used by Parlatype but open for other programs as well. . This package contains the HTML documentation for the Parlatype library - in /usr/share/gtk-doc/html/parlatype/ . + in /usr/share/doc/libparlatype-doc/html/ . Package: gir1.2-parlatype-1.0 Architecture: any diff -Nru parlatype-1.5.4/debian/copyright parlatype-1.5.6/debian/copyright --- parlatype-1.5.4/debian/copyright 2017-11-16 22:49:37.000000000 +0000 +++ parlatype-1.5.6/debian/copyright 2018-08-17 11:45:15.000000000 +0000 @@ -3,7 +3,7 @@ Source: https://github.com/gkarsay/parlatype Files: * -Copyright: 2016 Gabor Karsay +Copyright: 2016-2018 Gabor Karsay License: GPL-3+ Files: src/pt-goto-dialog.c @@ -28,11 +28,12 @@ License: CC-BY-SA-3 Files: help/* -Copyright: 2016 Gabor Karsay +Copyright: 2016–2018 Gabor Karsay License: CC-BY-SA-4 Files: *.po Copyright: 2017 Rosetta Contributors and Canonical Ltd 2017 + 2016 Gabor Karsay License: GPL-3+ Files: libparlatype/tests/data/test1.* @@ -57,8 +58,17 @@ License version 3 can be found in `/usr/share/common-licenses/GPL-3'. License: CC-BY-SA-3 + Creative Commons Legal Code + . Attribution-ShareAlike 3.0 Unported . + CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE + LEGAL SERVICES. DISTRIBUTION OF THIS LICENSE DOES NOT CREATE AN + ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS + INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES + REGARDING THE INFORMATION PROVIDED, AND DISCLAIMS LIABILITY FOR + DAMAGES RESULTING FROM ITS USE. + . License . THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS CREATIVE @@ -408,6 +418,62 @@ Creative Commons may be contacted at https://creativecommons.org/. License: CC-BY-SA-4 + Attribution-ShareAlike 4.0 International + . + ======================================================================= + . + Creative Commons Corporation ("Creative Commons") is not a law firm and + does not provide legal services or legal advice. Distribution of + Creative Commons public licenses does not create a lawyer-client or + other relationship. Creative Commons makes its licenses and related + information available on an "as-is" basis. Creative Commons gives no + warranties regarding its licenses, any material licensed under their + terms and conditions, or any related information. Creative Commons + disclaims all liability for damages resulting from their use to the + fullest extent possible. + . + Using Creative Commons Public Licenses + . + Creative Commons public licenses provide a standard set of terms and + conditions that creators and other rights holders may use to share + original works of authorship and other material subject to copyright + and certain other rights specified in the public license below. The + following considerations are for informational purposes only, are not + exhaustive, and do not form part of our licenses. + . + Considerations for licensors: Our public licenses are + intended for use by those authorized to give the public + permission to use material in ways otherwise restricted by + copyright and certain other rights. Our licenses are + irrevocable. Licensors should read and understand the terms + and conditions of the license they choose before applying it. + Licensors should also secure all rights necessary before + applying our licenses so that the public can reuse the + material as expected. Licensors should clearly mark any + material not subject to the license. This includes other CC- + licensed material, or material used under an exception or + limitation to copyright. More considerations for licensors: + wiki.creativecommons.org/Considerations_for_licensors + . + Considerations for the public: By using one of our public + licenses, a licensor grants the public permission to use the + licensed material under specified terms and conditions. If + the licensor's permission is not necessary for any reason--for + example, because of any applicable exception or limitation to + copyright--then that use is not regulated by the license. Our + licenses grant only permissions under copyright and certain + other rights that a licensor has authority to grant. Use of + the licensed material may still be restricted for other + reasons, including because others have copyright or other + rights in the material. A licensor may make special requests, + such as asking that all changes be marked or described. + Although not required by our licenses, you are encouraged to + respect those requests where reasonable. More considerations + for the public: + wiki.creativecommons.org/Considerations_for_licensees + . + ======================================================================= + . Creative Commons Attribution-ShareAlike 4.0 International Public License . By exercising the Licensed Rights (defined below), You accept and agree @@ -769,6 +835,62 @@ Creative Commons may be contacted at creativecommons.org. License: CC-BY-ND-4 + Attribution-NoDerivatives 4.0 International + . + ======================================================================= + . + Creative Commons Corporation ("Creative Commons") is not a law firm and + does not provide legal services or legal advice. Distribution of + Creative Commons public licenses does not create a lawyer-client or + other relationship. Creative Commons makes its licenses and related + information available on an "as-is" basis. Creative Commons gives no + warranties regarding its licenses, any material licensed under their + terms and conditions, or any related information. Creative Commons + disclaims all liability for damages resulting from their use to the + fullest extent possible. + . + Using Creative Commons Public Licenses + . + Creative Commons public licenses provide a standard set of terms and + conditions that creators and other rights holders may use to share + original works of authorship and other material subject to copyright + and certain other rights specified in the public license below. The + following considerations are for informational purposes only, are not + exhaustive, and do not form part of our licenses. + . + Considerations for licensors: Our public licenses are + intended for use by those authorized to give the public + permission to use material in ways otherwise restricted by + copyright and certain other rights. Our licenses are + irrevocable. Licensors should read and understand the terms + and conditions of the license they choose before applying it. + Licensors should also secure all rights necessary before + applying our licenses so that the public can reuse the + material as expected. Licensors should clearly mark any + material not subject to the license. This includes other CC- + licensed material, or material used under an exception or + limitation to copyright. More considerations for licensors: + wiki.creativecommons.org/Considerations_for_licensors + . + Considerations for the public: By using one of our public + licenses, a licensor grants the public permission to use the + licensed material under specified terms and conditions. If + the licensor's permission is not necessary for any reason--for + example, because of any applicable exception or limitation to + copyright--then that use is not regulated by the license. Our + licenses grant only permissions under copyright and certain + other rights that a licensor has authority to grant. Use of + the licensed material may still be restricted for other + reasons, including because others have copyright or other + rights in the material. A licensor may make special requests, + such as asking that all changes be marked or described. + Although not required by our licenses, you are encouraged to + respect those requests where reasonable. More considerations + for the public: + wiki.creativecommons.org/Considerations_for_licensees + . + ======================================================================= + . Creative Commons Attribution-NoDerivatives 4.0 International Public License . By exercising the Licensed Rights (defined below), You accept and agree diff -Nru parlatype-1.5.4/debian/gbp.conf parlatype-1.5.6/debian/gbp.conf --- parlatype-1.5.4/debian/gbp.conf 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/debian/gbp.conf 2018-08-17 11:12:42.000000000 +0000 @@ -0,0 +1,3 @@ +[DEFAULT] +pristine-tar = True + diff -Nru parlatype-1.5.4/debian/libparlatype1.lintian-overrides parlatype-1.5.6/debian/libparlatype1.lintian-overrides --- parlatype-1.5.4/debian/libparlatype1.lintian-overrides 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/debian/libparlatype1.lintian-overrides 2018-06-17 18:23:04.000000000 +0000 @@ -0,0 +1,3 @@ +# False positive: `blhc` confirms that hardening flags are set +# `hardening-check` finds unprotected memcpy() and read() +libparlatype1: hardening-no-fortify-functions usr/lib/*/libparlatype.so.* diff -Nru parlatype-1.5.4/debian/libparlatype-doc.doc-base parlatype-1.5.6/debian/libparlatype-doc.doc-base --- parlatype-1.5.4/debian/libparlatype-doc.doc-base 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/debian/libparlatype-doc.doc-base 2018-06-17 18:23:04.000000000 +0000 @@ -0,0 +1,10 @@ +Document: libparlatype +Title: Parlatype Library Reference Manual +Author: Gabor Karsay +Abstract: The Parlatype library provides a GStreamer based backend for + playing audio files, a wave loader and a (GTK+ based) wave viewer widget. +Section: Programming/C + +Format: HTML +Index: /usr/share/doc/libparlatype-doc/html/index.html +Files: /usr/share/doc/libparlatype-doc/html/*.html diff -Nru parlatype-1.5.4/debian/libparlatype-doc.links parlatype-1.5.6/debian/libparlatype-doc.links --- parlatype-1.5.4/debian/libparlatype-doc.links 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/debian/libparlatype-doc.links 2018-06-17 18:23:04.000000000 +0000 @@ -0,0 +1 @@ +usr/share/gtk-doc/html/parlatype usr/share/doc/libparlatype-doc/html diff -Nru parlatype-1.5.4/debian/parlatype.install parlatype-1.5.6/debian/parlatype.install --- parlatype-1.5.4/debian/parlatype.install 2017-11-19 15:53:35.000000000 +0000 +++ parlatype-1.5.6/debian/parlatype.install 2018-06-17 18:23:04.000000000 +0000 @@ -20,4 +20,4 @@ usr/share/icons/hicolor/scalable/apps/com.github.gkarsay.parlatype-symbolic.svg usr/share/locale/*/LC_MESSAGES/parlatype.mo usr/share/man/man1/parlatype.1 - +usr/share/metainfo/com.github.gkarsay.parlatype.appdata.xml diff -Nru parlatype-1.5.4/debian/parlatype-libreoffice-helpers.install parlatype-1.5.6/debian/parlatype-libreoffice-helpers.install --- parlatype-1.5.4/debian/parlatype-libreoffice-helpers.install 2017-11-19 15:53:35.000000000 +0000 +++ parlatype-1.5.6/debian/parlatype-libreoffice-helpers.install 2018-06-17 18:23:04.000000000 +0000 @@ -2,3 +2,4 @@ usr/share/help/*/com.github.gkarsay.parlatype/libreoffice-helpers.page usr/share/help/*/com.github.gkarsay.parlatype/figures/lo-customize.png usr/share/help/*/com.github.gkarsay.parlatype/figures/lo-menu.png +usr/share/metainfo/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml diff -Nru parlatype-1.5.4/debian/rules parlatype-1.5.6/debian/rules --- parlatype-1.5.4/debian/rules 2017-11-19 15:53:35.000000000 +0000 +++ parlatype-1.5.6/debian/rules 2018-08-17 14:31:02.000000000 +0000 @@ -3,16 +3,18 @@ export DEB_LDFLAGS_MAINT_APPEND=-Wl,--as-needed export DEB_BUILD_MAINT_OPTIONS = hardening=+all -DPKG_EXPORT_BUILDFLAGS = 1 -include /usr/share/dpkg/buildflags.mk - override_dh_autoreconf: dh_autoreconf --as-needed -override_dh_auto_configure: +# generate docs only architecture independent +override_dh_auto_configure-indep: dh_auto_configure -- --enable-gtk-doc \ - --enable-glade-catalog \ - --disable-tests + --enable-glade-catalog \ + --disable-tests + +override_dh_auto_configure-arch: + dh_auto_configure -- --enable-glade-catalog \ + --disable-tests %: dh $@ --with autoreconf,gir diff -Nru parlatype-1.5.4/debian/tests/control parlatype-1.5.6/debian/tests/control --- parlatype-1.5.4/debian/tests/control 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/debian/tests/control 2018-07-03 21:56:02.000000000 +0000 @@ -0,0 +1,11 @@ +Tests: libparlatype-test +Depends: libparlatype-dev, + gcc, + libgstreamer1.0-dev, + libgstreamer-plugins-base1.0-dev, + gstreamer1.0-plugins-good, +# for running GTK+ apps headless: + at-spi2-core, + dbus-x11, + xauth, + xvfb diff -Nru parlatype-1.5.4/debian/tests/libparlatype-test parlatype-1.5.6/debian/tests/libparlatype-test --- parlatype-1.5.4/debian/tests/libparlatype-test 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/debian/tests/libparlatype-test 2018-07-03 21:37:35.000000000 +0000 @@ -0,0 +1,29 @@ +#!/bin/sh +# autopkgtest check: Build and run libparlatype's test suite against installed headers + +# exit on error +set -e + +CFLAGS=`pkg-config --cflags parlatype glib-2.0 gstreamer-1.0 gstreamer-audio-1.0` +LIBS=`pkg-config --libs parlatype glib-2.0 gstreamer-1.0 gstreamer-audio-1.0` +srcdir=`pwd`/libparlatype/tests + +# X and D-BUS magic taken from: +# https://piware.de/2013/08/run-autopilot-test-in-autopkgtest/ + +# start X +(Xvfb :5 >/dev/null 2>&1 &) +XVFB_PID=$! +export DISPLAY=:5 + +# start local session D-BUS +eval `dbus-launch` +trap "kill $DBUS_SESSION_BUS_PID $XVFB_PID" 0 TERM QUIT INT +export DBUS_SESSION_BUS_ADDRESS +export XAUTHORITY=/dev/null + +# build and run tests +for test in player progressdialog wavedata waveloader waveviewer; do + gcc -o $test $srcdir/$test.c $CFLAGS $LIBS + G_TEST_SRCDIR=$srcdir ./$test +done diff -Nru parlatype-1.5.4/debian/upstream/metadata parlatype-1.5.6/debian/upstream/metadata --- parlatype-1.5.4/debian/upstream/metadata 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/debian/upstream/metadata 2018-08-04 22:52:37.000000000 +0000 @@ -0,0 +1,5 @@ +Name: parlatype +Contact: Gabor Karsay +Repository-Browse: https://github.com/gkarsay/parlatype +Bug-Database: https://github.com/gkarsay/parlatype/issues + diff -Nru parlatype-1.5.4/debian/upstream/signing-key.asc parlatype-1.5.6/debian/upstream/signing-key.asc --- parlatype-1.5.4/debian/upstream/signing-key.asc 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/debian/upstream/signing-key.asc 2018-06-17 18:23:04.000000000 +0000 @@ -0,0 +1,42 @@ +-----BEGIN PGP PUBLIC KEY BLOCK----- +Version: GnuPG v1 + +mQGiBEr/H6wRBACbughFai65RkiBgjrYf1oSmPsyTFBc7vgiFRZZRFtHNX52cuDE +4IatHjZf+HZ8l/mYnYNwpd704ZwVMHA1LH5Sg92o5AiIEJ154vN1wpR2Cm/QvZQB +TMcB1599flvlCpTJoE6IInbGrEFOOOiEoxefySN1RWp+tB0yVCDu9uEBQwCgzx2Q +aEPdWmCaCyWTEuiyhqAMMw8D/jU0sEdmafoqSQ2dUe4Bu6CHuhkCIp242pC9jPQ9 +2MXnq7BdcsRiouqXlp770ZVun7F7FZfIqD1ODELiJl6agTx3SbLWd7zN7h7e3cy3 +2BbO94GTolpSBZ4Ca5xZSiU5OiRIxHIkQVz9TPjN1LG8SUBSgVeniqvlCACuEszi +MAPoBACa8aJ1L5F+cgb37Ts+T6ZxoxtaDL4V/Uh9YM42hSU6TR6tWQp01GzOKDVU +3fw9TAaCPeqqXLKoTNsFjWnktRaXts44O81up/red2rOmQzNnWti71V98WWgp2Yv +CGAKsuMkdzGuijr6j41xkYG3DfHv59qEisSjjRiizGLE8JGmrrQiR2Fib3IgS2Fy +c2F5IDxnYWJvci5rYXJzYXlAZ214LmF0PohgBBMRAgAgAhsDBgsJCAcDAgQVAggD +BBYCAwECHgECF4AFAk0jhBsACgkQWp1c73Gwn8MjEwCgx2A63NnHNb+/pgmkc5lr +i6Q1mDIAoInYW4sG9OQpHdSjPMRzGStcIWMQuQINBE5QHtMQCADE6y1FIGWlEA3L +XT0ZkZRNsoNYxUoSv9XMAiUuHc2bWerNlB8jCY3dPK7wabrjyFLMtOEz3XooDuw0 +DgoFKvO/DkY605LdDCxRY6nFyUOhHenveyw6zjGREdg3Vo1YWuRvgji/TVuGx2AI +bZ1mkOB2JuYU5VyzoXgLXLxagCFYp7qmBsI31NvgG3CnBlmP/QJEm+KcnN/ZshSC +rlGOCf1uIS+tjsV8in5oWkoQ0z8TlTgtyXtIULFteapMRX6tyQZOE89neKY1Du9H +9Ch51DNiWVy+c75Iz3OLvxHj6Usf17tJQcSe4R4MFDY2s4Lxnw3rOj4dYEc6uao6 +TphoyZOHAAQLB/44RZFOEg46Cot3b46UJbPxr3kVKmsKbOADuvfRKeiDUzEn/SIV +bGEB6CajqxdhHkPSYOst9g6qiLXIUqZQTEg5yt3sUfXcV9Cu8KI09WWghr60eMYK +3KSAPmIteFqpj7aFTJ+F9E6oHo/HMBwU0fhuB5Zr/0v8hVyA/cRMGnM4LUqTFoAH +tAS9VB5Iyc4aEqLAQC78kiTklxh5cprCKqfEM+z/OSqP/XVMheRNIHKtGAOZ0/QY +UlqrMJQkP0ga5ihd1xfXrnTILYBczW4OSBx+j6whBk5ZvxKNL48j7XncCDQQfFen +TsFWpnSs/BAkLnNjd5pdujjaJM/yywqMInKdiEkEGBECAAkFAk5QHtMCGwwACgkQ +Wp1c73Gwn8PD6wCeNR+AsVXEzCyC+ibm9xehNhCSjNIAn18nYG5OsaUqJIWL9sj9 +a8aCFRlGuQINBEr/H6wQCACoPZ+wzhRXoZC0oYHGrk3zP1QlvaK8bKWXD2L186Qr +YmV0niUZqTxfbfJDC7qnDJ9mTeWVWBSNSxpLlUDPUp8B+Fe0dIGJMVfxSghSrVs6 +tj+slvs1w7j52J7/+TyoWr/8W0HcN2tUbxfR5Ez97M0kNCdlxxTfCwo4sJAYo+n8 +4Njf06BE9AVW3ZwhktXH0G99Bk3m0Q7hKLPeYtTKA9ZFscxqWgkQ6OexreQzOrQG +jzvwTwgG58bVmwSnYvBcBFZHCreLn63J9V23/dEEXjjlNsJLs5vrv9O7SPVuCGkb +7YNSHsZN5AY2VUjQj8r+xlWPKaXpBuGR35/DwSFtC6l3AAQLCACZZJxRSQa6pftB +JFwaqbkte/U5yzTlW9D9bzftRViPWRZK1DT2fL9gsGoMOIoC++x6AT07ahJbRpiP +0a86nTRgk/12UU+Vk9E4HE2e4ZAtxVxXgAw+3hpMhifyxcQzCOjBLQ/fb/OJEn9t +LzCnLVRepi7v7k+OaWccV1kPyxSidkbYZFZk1TCCV6jr5M7FysEmdyGsrWyAAoii +G7WV3QAcRSCzC7WHEwIuD7VoUDyFIie6+3iWsW/fGR2s8Cy9BaxwXI8L8SmmOAmp +cLE4Euy0U9lo/mQXasDao20KQbEfnx/ZoBRjSl3IWpkOtYJO7bjmABqaT6vIrL22 +b+q4T4dIiE8EGBECAA8FAkr/H6wCGwwFCQHf+MQACgkQWp1c73Gwn8M+TwCdGt6d +eX1ypdlMz2JBwH7YOCXZXvYAni7Uyv3bavWKjcNoCElqTm71Uarf +=g4mA +-----END PGP PUBLIC KEY BLOCK----- diff -Nru parlatype-1.5.4/debian/watch parlatype-1.5.6/debian/watch --- parlatype-1.5.4/debian/watch 2017-11-19 15:53:35.000000000 +0000 +++ parlatype-1.5.6/debian/watch 2018-06-17 18:23:04.000000000 +0000 @@ -1,2 +1,3 @@ -version=3 +version=4 +opts=pgpsigurlmangle=s/$/.asc/ \ https://github.com/gkarsay/parlatype/releases .*/parlatype-(\d\S*)\.tar\.gz diff -Nru parlatype-1.5.4/depcomp parlatype-1.5.6/depcomp --- parlatype-1.5.4/depcomp 2017-10-12 10:56:13.000000000 +0000 +++ parlatype-1.5.6/depcomp 2018-04-09 18:23:15.000000000 +0000 @@ -3,7 +3,7 @@ scriptversion=2013-05-30.07; # UTC -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by diff -Nru parlatype-1.5.4/docs/Makefile.in parlatype-1.5.6/docs/Makefile.in --- parlatype-1.5.4/docs/Makefile.in 2017-11-19 15:49:26.000000000 +0000 +++ parlatype-1.5.6/docs/Makefile.in 2018-08-17 10:45:10.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -14,7 +14,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -78,8 +88,6 @@ build_triplet = @build@ host_triplet = @host@ subdir = docs -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(dist_man_MANS) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ @@ -88,6 +96,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -143,6 +152,7 @@ NROFF = nroff MANS = $(dist_man_MANS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -164,7 +174,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ @@ -215,6 +224,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -297,6 +307,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -322,7 +333,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign docs/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -546,6 +556,8 @@ ps ps-am tags-am uninstall uninstall-am uninstall-man \ uninstall-man1 +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru parlatype-1.5.4/help/C/keyboard-shortcuts.page parlatype-1.5.6/help/C/keyboard-shortcuts.page --- parlatype-1.5.4/help/C/keyboard-shortcuts.page 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/help/C/keyboard-shortcuts.page 2018-06-17 20:35:03.000000000 +0000 @@ -37,10 +37,22 @@

Ctrlr

+

Play/Pause

+

CtrlSpace

+ +

Go to …

Ctrlg

+

Jump back

+

CtrlLeft

+ + +

Jump forward

+

CtrlRight

+ +

Copy timestamp

Ctrlc

diff -Nru parlatype-1.5.4/help/de/de.po parlatype-1.5.6/help/de/de.po --- parlatype-1.5.4/help/de/de.po 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/help/de/de.po 2018-06-17 20:35:03.000000000 +0000 @@ -1,14 +1,14 @@ # German translations for parlatype help. # Copyright (C) 2016 Gabor Karsay # This file is distributed under the same license as the parlatype package. -# Gabor Karsay , 2016, 2017. +# Gabor Karsay , 2016, 2017, 2018. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-07-20 16:20+0200\n" -"PO-Revision-Date: 2017-07-20 16:24+0200\n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" +"PO-Revision-Date: 2018-01-09 19:21+0100\n" "Last-Translator: Gabor Karsay \n" "Language-Team: Deutsch <>\n" "Language: de\n" @@ -186,7 +186,7 @@ msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " -"md5='1e21a2ddc61fda06238b6b1537191cb3'" +"md5='c57ce9c636f96646e8ba668d290fb352'" msgstr "" "external ref='figures/parlatype-main-window.png' " "md5='4d4c5bc3942ce7586ce797ef650ca28b'" @@ -320,61 +320,91 @@ #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 +msgid "Play/Pause" +msgstr "Wiedergabe/Pause" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:41 +msgid "CtrlSpace" +msgstr "StrgLeertaste" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:44 msgid "Go to …" msgstr "Gehe zu …" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:41 +#: C/keyboard-shortcuts.page:45 msgid "Ctrlg" msgstr "Strgg" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:44 +#: C/keyboard-shortcuts.page:48 +msgid "Jump back" +msgstr "Zurückspringen" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:49 +msgid "CtrlLeft" +msgstr "StrgPfeiltaste links" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:52 +msgid "Jump forward" +msgstr "Vorwärts springen" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:53 +msgid "CtrlRight" +msgstr "StrgPfeiltaste rechts" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 msgid "Copy timestamp" msgstr "Zeitstempel kopieren" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:45 +#: C/keyboard-shortcuts.page:57 msgid "Ctrlc" msgstr "Strgc" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:48 +#: C/keyboard-shortcuts.page:60 msgid "Insert timestamp" msgstr "Zeitstempel einfügen" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:49 +#: C/keyboard-shortcuts.page:61 msgid "Ctrlv" msgstr "Strgv" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:52 +#: C/keyboard-shortcuts.page:64 msgid "Zoom in" msgstr "Hineinzoomen" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:53 +#: C/keyboard-shortcuts.page:65 msgid "Ctrl+" msgstr "Strg+" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:56 +#: C/keyboard-shortcuts.page:68 msgid "Zoom out" msgstr "Herauszoomen" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:57 +#: C/keyboard-shortcuts.page:69 msgid "Ctrl-" msgstr "Strg-" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:60 +#: C/keyboard-shortcuts.page:72 msgid "Quit" msgstr "Beenden" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:61 +#: C/keyboard-shortcuts.page:73 msgid "Ctrlq" msgstr "Strgq" diff -Nru parlatype-1.5.4/help/de/keyboard-shortcuts.page parlatype-1.5.6/help/de/keyboard-shortcuts.page --- parlatype-1.5.4/help/de/keyboard-shortcuts.page 2017-11-18 21:22:30.000000000 +0000 +++ parlatype-1.5.6/help/de/keyboard-shortcuts.page 2018-08-17 10:46:12.000000000 +0000 @@ -36,10 +36,22 @@

Strgr

+

Wiedergabe/Pause

+

StrgLeertaste

+ +

Gehe zu …

Strgg

+

Zurückspringen

+

StrgPfeiltaste links

+ + +

Vorwärts springen

+

StrgPfeiltaste rechts

+ +

Zeitstempel kopieren

Strgc

diff -Nru parlatype-1.5.4/help/en_GB/en_GB.po parlatype-1.5.6/help/en_GB/en_GB.po --- parlatype-1.5.4/help/en_GB/en_GB.po 2017-11-10 15:36:42.000000000 +0000 +++ parlatype-1.5.6/help/en_GB/en_GB.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,16 +7,16 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-07-20 16:20+0200\n" -"PO-Revision-Date: 2017-10-17 18:56+0000\n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" +"PO-Revision-Date: 2018-03-08 01:20+0000\n" "Last-Translator: Andi Chandler \n" "Language-Team: English (United Kingdom) \n" +"Language: en_GB\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Launchpad-Export-Date: 2017-11-10 15:36+0000\n" -"X-Generator: Launchpad (build 18498)\n" -"Language: \n" +"X-Launchpad-Export-Date: 2018-03-08 16:40+0000\n" +"X-Generator: Launchpad (build 18566)\n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" @@ -39,22 +39,15 @@ msgstr "Parlatype" #. (itstool) path: credit/name -#: C/index.page:10 -#: C/drag-and-drop.page:8 -#: C/first-steps.page:8 -#: C/keyboard-shortcuts.page:8 -#: C/media-keys.page:8 -#: C/preferences.page:8 -#: C/selections.page:8 -#: C/timestamps.page:8 -#: C/libreoffice-helpers.page:9 +#: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p -#: C/index.page:14 -#: C/index.page:23 +#: C/index.page:14 C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." @@ -112,19 +105,17 @@ #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" -"File names: Select a file name from a word processor, e.g. " -"LibreOffice, drop the selected text on Parlatype and " -"it will open that file. This will always work if the selection contains a " -"full path. If you select the name only, Parlatype will look up " -"its full path in the list of recent files and open it if it can find it in " -"that list." -msgstr "" -"File names: Select a file name from a word processor, e.g. " -"LibreOffice, drop the selected text on Parlatype and " -"it will open that file. This will always work if the selection contains a " -"full path. If you select the name only, Parlatype will look up " -"its full path in the list of recent files and open it if it can find it in " -"that list." +"File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " +"file. This will always work if the selection contains a full path. If you " +"select the name only, Parlatype will look up its full path in the " +"list of recent files and open it if it can find it in that list." +msgstr "" +"File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " +"file. This will always work if the selection contains a full path. If you " +"select the name only, Parlatype will look up its full path in the " +"list of recent files and open it if it can find it in that list." #. (itstool) path: item/p #: C/drag-and-drop.page:21 @@ -143,8 +134,7 @@ #. (itstool) path: info/desc #. (itstool) path: page/title -#: C/first-steps.page:6 -#: C/first-steps.page:14 +#: C/first-steps.page:6 C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "First steps with Parlatype" @@ -193,10 +183,10 @@ msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " -"md5='1e21a2ddc61fda06238b6b1537191cb3'" +"md5='c57ce9c636f96646e8ba668d290fb352'" msgstr "" "external ref='figures/parlatype-main-window.png' " -"md5='1e21a2ddc61fda06238b6b1537191cb3'" +"md5='c57ce9c636f96646e8ba668d290fb352'" #. (itstool) path: page/p #: C/first-steps.page:26 @@ -323,61 +313,91 @@ #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 +msgid "Play/Pause" +msgstr "Play/Pause" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:41 +msgid "CtrlSpace" +msgstr "CtrlSpace" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:44 msgid "Go to …" msgstr "Go to…" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:41 +#: C/keyboard-shortcuts.page:45 msgid "Ctrlg" msgstr "Ctrlg" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:44 +#: C/keyboard-shortcuts.page:48 +msgid "Jump back" +msgstr "Jump back" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:49 +msgid "CtrlLeft" +msgstr "CtrlLeft" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:52 +msgid "Jump forward" +msgstr "Jump forward" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:53 +msgid "CtrlRight" +msgstr "CtrlRight" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 msgid "Copy timestamp" msgstr "Copy timestamp" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:45 +#: C/keyboard-shortcuts.page:57 msgid "Ctrlc" msgstr "Ctrlc" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:48 +#: C/keyboard-shortcuts.page:60 msgid "Insert timestamp" msgstr "Insert timestamp" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:49 +#: C/keyboard-shortcuts.page:61 msgid "Ctrlv" msgstr "Ctrlv" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:52 +#: C/keyboard-shortcuts.page:64 msgid "Zoom in" msgstr "Zoom in" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:53 +#: C/keyboard-shortcuts.page:65 msgid "Ctrl+" msgstr "Ctrl+" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:56 +#: C/keyboard-shortcuts.page:68 msgid "Zoom out" msgstr "Zoom out" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:57 +#: C/keyboard-shortcuts.page:69 msgid "Ctrl-" msgstr "Ctrl-" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:60 +#: C/keyboard-shortcuts.page:72 msgid "Quit" msgstr "Quit" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:61 +#: C/keyboard-shortcuts.page:73 msgid "Ctrlq" msgstr "Ctrlq" @@ -742,13 +762,13 @@ msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " -"also possible the other way round: Drag the time label from " -"Parlatype to a word processor and drop it there to insert it." +"also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." msgstr "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " -"also possible the other way round: Drag the time label from " -"Parlatype to a word processor and drop it there to insert it." +"also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." #. (itstool) path: section/title #: C/timestamps.page:29 @@ -786,8 +806,7 @@ #. (itstool) path: page/title #. (itstool) path: table/title -#: C/libreoffice-helpers.page:15 -#: C/libreoffice-helpers.page:30 +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "LibreOffice Helpers" diff -Nru parlatype-1.5.4/help/en_GB/keyboard-shortcuts.page parlatype-1.5.6/help/en_GB/keyboard-shortcuts.page --- parlatype-1.5.4/help/en_GB/keyboard-shortcuts.page 2017-11-18 21:22:30.000000000 +0000 +++ parlatype-1.5.6/help/en_GB/keyboard-shortcuts.page 2018-08-17 10:46:13.000000000 +0000 @@ -36,10 +36,22 @@

Ctrlr

+

Play/Pause

+

CtrlSpace

+ +

Go to…

Ctrlg

+

Jump back

+

CtrlLeft

+ + +

Jump forward

+

CtrlRight

+ +

Copy timestamp

Ctrlc

diff -Nru parlatype-1.5.4/help/es/es.po parlatype-1.5.6/help/es/es.po --- parlatype-1.5.4/help/es/es.po 2017-11-10 15:36:42.000000000 +0000 +++ parlatype-1.5.6/help/es/es.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,15 +7,16 @@ msgstr "" "Project-Id-Version: parlatype\n" "Report-Msgid-Bugs-To: FULL NAME \n" -"POT-Creation-Date: 2017-07-20 16:20+0200\n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" "PO-Revision-Date: 2017-08-11 00:23+0000\n" "Last-Translator: Adolfo Jayme \n" "Language-Team: Spanish \n" +"Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Launchpad-Export-Date: 2017-11-10 15:36+0000\n" -"X-Generator: Launchpad (build 18498)\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" @@ -37,22 +38,15 @@ msgstr "Parlatype" #. (itstool) path: credit/name -#: C/index.page:10 -#: C/drag-and-drop.page:8 -#: C/first-steps.page:8 -#: C/keyboard-shortcuts.page:8 -#: C/media-keys.page:8 -#: C/preferences.page:8 -#: C/selections.page:8 -#: C/timestamps.page:8 -#: C/libreoffice-helpers.page:9 +#: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p -#: C/index.page:14 -#: C/index.page:23 +#: C/index.page:14 C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." @@ -71,8 +65,8 @@ "For a quick overview have a look at . Other " "topics are covered below." msgstr "" -"Para obtener un panorama general breve, consulte . A continuación se tratan otros temas." +"Para obtener un panorama general breve, consulte . A continuación se tratan otros temas." #. (itstool) path: section/title #: C/index.page:27 @@ -111,12 +105,11 @@ #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" -"File names: Select a file name from a word processor, e.g. " -"LibreOffice, drop the selected text on Parlatype and " -"it will open that file. This will always work if the selection contains a " -"full path. If you select the name only, Parlatype will look up " -"its full path in the list of recent files and open it if it can find it in " -"that list." +"File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " +"file. This will always work if the selection contains a full path. If you " +"select the name only, Parlatype will look up its full path in the " +"list of recent files and open it if it can find it in that list." msgstr "" "Nombres de archivo: seleccione un nombre de archivo en un procesador de " "textos, p. ej., LibreOffice, suelte el texto seleccionado en " @@ -143,8 +136,7 @@ #. (itstool) path: info/desc #. (itstool) path: page/title -#: C/first-steps.page:6 -#: C/first-steps.page:14 +#: C/first-steps.page:6 C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "Primeros pasos con Parlatype" @@ -180,11 +172,11 @@ "few seconds to make it easier to resume. This can be changed in the ." msgstr "" -"Ahora encontrará en la esquina superior izquierda el botón " -"Reproducir, que intercambia entre las acciones de reproducir y " -"pausar. Siempre que utilice la función de pausar, Parlatype " -"retrocede unos segundos para facilitarle reanudar. Este comportamiento se " -"puede modificar en las ." +"Ahora encontrará en la esquina superior izquierda el botón Reproducir, que intercambia entre las acciones de reproducir y pausar. Siempre que " +"utilice la función de pausar, Parlatype retrocede unos segundos " +"para facilitarle reanudar. Este comportamiento se puede modificar en las " +"." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When @@ -192,10 +184,11 @@ #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 +#, fuzzy msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " -"md5='1e21a2ddc61fda06238b6b1537191cb3'" +"md5='c57ce9c636f96646e8ba668d290fb352'" msgstr "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" @@ -259,9 +252,8 @@ "listed below." msgstr "" "Los atajos de teclado de Parlatype, que permiten controlar " -"acciones como Reproducir, se describen en . Los atajos de teclado para la ventana se enumeran a " -"continuación." +"acciones como Reproducir, se describen en . Los atajos de teclado para la ventana se enumeran a continuación." #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 @@ -310,61 +302,94 @@ #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 +msgid "Play/Pause" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:41 +#, fuzzy +msgid "CtrlSpace" +msgstr "CtrlC" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:44 msgid "Go to …" msgstr "Ir a…" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:41 +#: C/keyboard-shortcuts.page:45 msgid "Ctrlg" msgstr "CtrlG" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:44 +#: C/keyboard-shortcuts.page:48 +msgid "Jump back" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:49 +#, fuzzy +msgid "CtrlLeft" +msgstr "CtrlO" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:52 +msgid "Jump forward" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:53 +#, fuzzy +msgid "CtrlRight" +msgstr "CtrlG" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 msgid "Copy timestamp" msgstr "Copiar la marca cronológica" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:45 +#: C/keyboard-shortcuts.page:57 msgid "Ctrlc" msgstr "CtrlC" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:48 +#: C/keyboard-shortcuts.page:60 msgid "Insert timestamp" msgstr "Insertar una marca cronológica" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:49 +#: C/keyboard-shortcuts.page:61 msgid "Ctrlv" msgstr "CtrlV" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:52 +#: C/keyboard-shortcuts.page:64 msgid "Zoom in" msgstr "Ampliar" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:53 +#: C/keyboard-shortcuts.page:65 msgid "Ctrl+" msgstr "Ctrl+" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:56 +#: C/keyboard-shortcuts.page:68 msgid "Zoom out" msgstr "Reducir" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:57 +#: C/keyboard-shortcuts.page:69 msgid "Ctrl-" msgstr "Ctrl-" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:60 +#: C/keyboard-shortcuts.page:72 msgid "Quit" msgstr "Salir" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:61 +#: C/keyboard-shortcuts.page:73 msgid "Ctrlq" msgstr "CtrlQ" @@ -418,8 +443,8 @@ "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." msgstr "" -"Ello también afectará otros reproductores de multimedia, como " -"Totem o Rhythmbox." +"Ello también afectará otros reproductores de multimedia, como Totem o Rhythmbox." #. (itstool) path: page/p #: C/media-keys.page:24 @@ -687,8 +712,8 @@ msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " -"also possible the other way round: Drag the time label from " -"Parlatype to a word processor and drop it there to insert it." +"also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." msgstr "" #. (itstool) path: section/title @@ -720,8 +745,7 @@ #. (itstool) path: page/title #. (itstool) path: table/title -#: C/libreoffice-helpers.page:15 -#: C/libreoffice-helpers.page:30 +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "Auxiliares de LibreOffice" @@ -742,9 +766,9 @@ "itself. To do this, open LibreOffice, go to menu Tools " "and select Customize." msgstr "" -"Para utilizarlos, debe asignarles atajos de teclado en " -"LibreOffice. Para hacerlo, abra LibreOffice, diríjase " -"al menú Herramientas y seleccione Personalizar." +"Para utilizarlos, debe asignarles atajos de teclado en LibreOffice. Para hacerlo, abra LibreOffice, diríjase al menú " +"Herramientas y seleccione Personalizar." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When @@ -771,13 +795,13 @@ msgstr "" "Desplácese a la pestaña Teclado. En el apartado inferior, " "Funciones, encontrará una lista denominada Categoría. " -"Al final de esta lista, eoncontrará la entrada Macros de " -"LibreOffice. Allí se encuentra una subcategoría «share» " -"que, a su vez, contiene la subcategoría Parlatype. Cuando " -"seleccione Parlatype, se desplegará una lista de funciones en la " -"lista Funciones. Elija la función que quiera utilizar, seleccione " -"un atajo de la lista Atajos de teclado que está encima, y pulse " -"en el botón Modificar." +"Al final de esta lista, eoncontrará la entrada Macros de LibreOffice. Allí se encuentra una subcategoría «share» que, a su vez, " +"contiene la subcategoría Parlatype. Cuando seleccione " +"Parlatype, se desplegará una lista de funciones en la lista " +"Funciones. Elija la función que quiera utilizar, seleccione un " +"atajo de la lista Atajos de teclado que está encima, y pulse en " +"el botón Modificar." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When diff -Nru parlatype-1.5.4/help/es/keyboard-shortcuts.page parlatype-1.5.6/help/es/keyboard-shortcuts.page --- parlatype-1.5.4/help/es/keyboard-shortcuts.page 2017-11-18 21:22:31.000000000 +0000 +++ parlatype-1.5.6/help/es/keyboard-shortcuts.page 2018-08-17 10:46:13.000000000 +0000 @@ -36,10 +36,22 @@

CtrlR

+

Play/Pause

+

CtrlSpace

+ +

Ir a…

CtrlG

+

Jump back

+

CtrlLeft

+ + +

Jump forward

+

CtrlRight

+ +

Copiar la marca cronológica

CtrlC

diff -Nru parlatype-1.5.4/help/fi/drag-and-drop.page parlatype-1.5.6/help/fi/drag-and-drop.page --- parlatype-1.5.4/help/fi/drag-and-drop.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/drag-and-drop.page 2018-08-17 10:46:14.000000000 +0000 @@ -0,0 +1,23 @@ + + + + + Drop files, file names or timestamps on Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Vedä ja pudota + +

You can drop files, file names or timestamps on Parlatype's window.

+ + +

Files: Drag and drop a file from a file manager, e.g. Files, on Parlatype and it will open that file.

 +

File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that file. This will always work if the selection contains a full path. If you select the name only, Parlatype will look up its full path in the list of recent files and open it if it can find it in that list.

 +

Timestamps: You can drag and drop timestamps in both directions. Select a timestamp from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will jump to that position. Or you click on Parlatype's time label and drag it to a word processor to insert it there.

 + + + diff -Nru parlatype-1.5.4/help/fi/fi.po parlatype-1.5.6/help/fi/fi.po --- parlatype-1.5.4/help/fi/fi.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/fi.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,818 @@ +# Finnish translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: FULL NAME \n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" +"PO-Revision-Date: 2017-11-21 09:45+0000\n" +"Last-Translator: Jiri Grönroos \n" +"Language-Team: Finnish \n" +"Language: fi\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" + +#. Put one translator per line, in the form NAME , YEAR1, YEAR2 +msgctxt "_" +msgid "translator-credits" +msgstr "" +"Launchpad Contributions:\n" +" Jiri Grönroos https://launchpad.net/~jiri-gronroos" + +#. (itstool) path: info/title +#: C/index.page:7 +msgctxt "text" +msgid "Parlatype" +msgstr "Parlatype" + +#. (itstool) path: info/title +#: C/index.page:8 +msgctxt "link" +msgid "Parlatype" +msgstr "Parlatype" + +#. (itstool) path: credit/name +#: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 +msgid "Gabor Karsay" +msgstr "Gabor Karsay" + +#. (itstool) path: info/desc +#. (itstool) path: page/p +#: C/index.page:14 C/index.page:23 +msgid "" +"Parlatype is an easy to use media player. Its main purpose is to " +"help you transcribing speech." +msgstr "" + +#. (itstool) path: page/title +#: C/index.page:18 +msgid "<_:media-1/> Parlatype" +msgstr "" + +#. (itstool) path: page/p +#: C/index.page:24 +msgid "" +"For a quick overview have a look at . Other " +"topics are covered below." +msgstr "" + +#. (itstool) path: section/title +#: C/index.page:27 +msgid "Help topics" +msgstr "Ohjeen aihealueet" + +#. (itstool) path: info/desc +#: C/drag-and-drop.page:6 +msgid "Drop files, file names or timestamps on Parlatype" +msgstr "" + +#. (itstool) path: page/title +#: C/drag-and-drop.page:14 +msgid "Drag and Drop" +msgstr "Vedä ja pudota" + +#. (itstool) path: page/p +#: C/drag-and-drop.page:16 +msgid "" +"You can drop files, file names or timestamps on Parlatype's " +"window." +msgstr "" + +#. (itstool) path: item/p +#: C/drag-and-drop.page:19 +msgid "" +"Files: Drag and drop a file from a file manager, e.g. Files, on " +"Parlatype and it will open that file." +msgstr "" + +#. (itstool) path: item/p +#: C/drag-and-drop.page:20 +msgid "" +"File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " +"file. This will always work if the selection contains a full path. If you " +"select the name only, Parlatype will look up its full path in the " +"list of recent files and open it if it can find it in that list." +msgstr "" + +#. (itstool) path: item/p +#: C/drag-and-drop.page:21 +msgid "" +"Timestamps: You can drag and drop timestamps in both directions. Select a " +"timestamp from a word processor, e.g. LibreOffice, drop the " +"selected text on Parlatype and it will jump to that position. Or " +"you click on Parlatype's time label and drag it to a word " +"processor to insert it there." +msgstr "" + +#. (itstool) path: info/desc +#. (itstool) path: page/title +#: C/first-steps.page:6 C/first-steps.page:14 +msgid "First steps with Parlatype" +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:16 +msgid "" +"Parlatype is an easy to use audio player to help you transcribing " +"or annotating recorded speech. You need to run a word processor, e.g. " +"LibreOffice, too. Launch Parlatype and open an audio " +"file by clicking on the Open button in the upper left corner." +msgstr "" + +#. (itstool) path: note/p +#: C/first-steps.page:19 +msgid "" +"You can also drag and drop a file on Parlatype or open the " +"recently used files in the Application menu." +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:22 +msgid "" +"Now in the upper left corner there is a Play button which toggles " +"between play and pause. Whenever you pause, Parlatype rewinds a " +"few seconds to make it easier to resume. This can be changed in the ." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/first-steps.page:24 +#, fuzzy +msgctxt "_" +msgid "" +"external ref='figures/parlatype-main-window.png' " +"md5='c57ce9c636f96646e8ba668d290fb352'" +msgstr "" +"external ref='figures/parlatype-main-window.png' " +"md5='1e21a2ddc61fda06238b6b1537191cb3'" + +#. (itstool) path: page/p +#: C/first-steps.page:26 +msgid "" +"The buttons Jump back and Jump forward in the lower " +"left corner skip a few seconds back or ahead. The amount of time can be " +"changed in the ." +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:28 +msgid "" +"The view scrolls automatically so that the cursor is always visible. You can " +"scroll manually by clicking on or dragging the scroll bar or using the " +"standard keybindings. Automatic scrolling is stopped then." +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:30 +msgid "" +"To get back to the cursor's position and let the view scroll automatically " +"again, click on the Go to button next to the time label. Clicking " +"on the Play button also turns automatic scrolling on." +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:32 +msgid "" +"Clicking in the view with the right mouse button will put the cursor there, " +"also holding the right mouse button pressed and moving it. The left mouse " +"button is for ." +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:34 +msgid "" +"The speed scale next to the volume button in the lower " +"right corner lets you adjust the speed of playback. A value of 1 means " +"normal speed, everything lower (down to 0.5) is slower, everything above is " +"faster." +msgstr "" + +#. (itstool) path: info/desc +#: C/keyboard-shortcuts.page:6 +msgid "Standard keyboard shortcuts in Parlatype" +msgstr "" + +#. (itstool) path: page/title +#: C/keyboard-shortcuts.page:14 +msgid "Keyboard shortcuts" +msgstr "Pikanäppäimet" + +#. (itstool) path: page/p +#: C/keyboard-shortcuts.page:16 +msgid "" +"Keyboard shortcuts for Parlatype control, like Play, " +"are described in . Shortcut keys for the window are " +"listed below." +msgstr "" + +#. (itstool) path: table/title +#: C/keyboard-shortcuts.page:19 +msgid "Standard Shortcut keys" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:22 +msgid "To Do This" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:23 +msgid "Press This" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:28 +msgid "Show help" +msgstr "Näytä ohje" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:29 +msgid "F1" +msgstr "F1" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:32 +msgid "Open file" +msgstr "Avaa tiedosto" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:33 +msgid "Ctrlo" +msgstr "Ctrlo" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:36 +msgid "Open recent files" +msgstr "Avaa viimeisimmät tiedostot" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:37 +msgid "Ctrlr" +msgstr "Ctrlr" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:40 +msgid "Play/Pause" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:41 +#, fuzzy +msgid "CtrlSpace" +msgstr "Ctrlc" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:44 +msgid "Go to …" +msgstr "Siirry…" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:45 +msgid "Ctrlg" +msgstr "Ctrlg" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:48 +msgid "Jump back" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:49 +#, fuzzy +msgid "CtrlLeft" +msgstr "Ctrlo" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:52 +msgid "Jump forward" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:53 +#, fuzzy +msgid "CtrlRight" +msgstr "Ctrlg" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 +msgid "Copy timestamp" +msgstr "Kopioi aikaleima" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:57 +msgid "Ctrlc" +msgstr "Ctrlc" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:60 +msgid "Insert timestamp" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:61 +msgid "Ctrlv" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:64 +msgid "Zoom in" +msgstr "Lähennä" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:65 +msgid "Ctrl+" +msgstr "Ctrl+" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:68 +msgid "Zoom out" +msgstr "Loitonna" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:69 +msgid "Ctrl-" +msgstr "Ctrl-" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:72 +msgid "Quit" +msgstr "Lopeta" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:73 +msgid "Ctrlq" +msgstr "Ctrlq" + +#. (itstool) path: p/link +#: C/legal.xml:5 +msgid "Creative Commons Attribution-ShareAlike 4.0 International" +msgstr "" + +#. (itstool) path: license/p +#: C/legal.xml:4 +msgid "This work is licensed under a <_:link-1/> license." +msgstr "" + +#. (itstool) path: info/desc +#: C/media-keys.page:6 +msgid "How to control Parlatype with media keys" +msgstr "" + +#. (itstool) path: page/title +#: C/media-keys.page:14 +msgid "Media keys" +msgstr "Medianäppäimet" + +#. (itstool) path: page/p +#: C/media-keys.page:16 +msgid "" +"Parlatype's basic functions can be controlled with so called " +"media keys. Media keys are used system wide to control media " +"players and they are working even if the media player is not in focus or in " +"the background." +msgstr "" + +#. (itstool) path: page/p +#: C/media-keys.page:18 +msgid "" +"You can change the media keys in GNOME settings. You can use dedicated keys " +"from a multimedia keyboard or use any other key or combination of keys." +msgstr "" + +#. (itstool) path: note/p +#: C/media-keys.page:21 +msgid "" +"This will affect other media players, e.g. Totem or " +"Rhythmbox, as well." +msgstr "" + +#. (itstool) path: page/p +#: C/media-keys.page:24 +msgid "Parlatype listens to these key strokes:" +msgstr "" + +#. (itstool) path: item/p +#: C/media-keys.page:26 +msgid "" +"Play, Pause, Stop: Each of these keys " +"toggles between playing and pause." +msgstr "" + +#. (itstool) path: item/p +#: C/media-keys.page:27 +msgid "" +"Rewind, Previous: Each of these keys will jump back " +"the time you selected in Preferences." +msgstr "" + +#. (itstool) path: item/p +#: C/media-keys.page:28 +msgid "" +"Fast Forward, Next: Each of these keys will jump ahead " +"the time you selected in Preferences." +msgstr "" + +#. (itstool) path: note/p +#: C/media-keys.page:32 +msgid "" +"For detailed instructions how to change keyboard shortcuts in GNOME see the " +"official " +"documentation." +msgstr "" + +#. (itstool) path: page/p +#: C/media-keys.page:35 +msgid "" +"If you are using a dedicated foot pedal, it should be possible to map the " +"foot pedal signals to any of the keys. This is not well tested, however. Any " +"feedback regarding foot pedals is welcome." +msgstr "" + +#. (itstool) path: info/desc +#: C/preferences.page:6 +msgid "How to customize Parlatype" +msgstr "Parlatypen mukauttaminen" + +#. (itstool) path: page/title +#: C/preferences.page:14 +msgid "Preferences" +msgstr "Asetukset" + +#. (itstool) path: page/p +#: C/preferences.page:16 +msgid "" +"You can reach the preferences window in the Application Menu (next to " +"Activities in the top left corner. There are three tabs: " +"Waveform, Controls and Window." +msgstr "" + +#. (itstool) path: section/title +#: C/preferences.page:19 +msgid "Waveform" +msgstr "" + +#. (itstool) path: section/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/preferences.page:21 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-prefs-waveform.png' " +"md5='e9d05960162dcdddab10378e21ce63da'" +msgstr "" +"external ref='figures/parlatype-prefs-waveform.png' " +"md5='e9d05960162dcdddab10378e21ce63da'" + +#. (itstool) path: item/p +#: C/preferences.page:24 +msgid "" +"Resolution: The resolution of the waveform image is given in pixels per " +"second, e.g. the default resolution of 100 means, that one second is shown " +"with a width of 100 pixels." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:25 +msgid "" +"Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " +"slower systems a moving cursor might be smoother." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:26 +msgid "Show time scale: Turn the time scale on or off." +msgstr "" + +#. (itstool) path: section/title +#: C/preferences.page:31 +msgid "Controls" +msgstr "" + +#. (itstool) path: section/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/preferences.page:33 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-prefs-controls.png' " +"md5='0b50614222d881110b176c2e28b7d18c'" +msgstr "" +"external ref='figures/parlatype-prefs-controls.png' " +"md5='0b50614222d881110b176c2e28b7d18c'" + +#. (itstool) path: item/p +#: C/preferences.page:36 +msgid "" +"Jump back on pause: Parlatype will rewind a few seconds on each " +"pause, this way you can easier resume typing. Set this value to 0 if you " +"don't want this behaviour." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:37 +msgid "" +"Jump back: Configures how many seconds to skip when the Jump back " +"button is pressed." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:38 +msgid "" +"Jump forward: Configures how many seconds to skip when the Jump " +"forward button is pressed." +msgstr "" + +#. (itstool) path: section/title +#: C/preferences.page:43 +msgid "Window" +msgstr "Ikkuna" + +#. (itstool) path: section/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/preferences.page:45 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-prefs-window.png' " +"md5='6affc475c74223fa48e7de25393fe7de'" +msgstr "" +"external ref='figures/parlatype-prefs-window.png' " +"md5='6affc475c74223fa48e7de25393fe7de'" + +#. (itstool) path: item/p +#: C/preferences.page:48 +msgid "" +"Remember size: On start-up Parlatype sets the window size to the " +"size it had the last time." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:49 +msgid "" +"Remember position: On start-up Parlatype can position its window " +"where you had it when you closed Parlatype last time." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:50 +msgid "" +"Start on top: This will put Parlatype on start-up on top of other " +"windows. This might be useful if you are working with a maximized word " +"processor and still want to see the Parlatype window." +msgstr "" + +#. (itstool) path: note/p +#: C/preferences.page:54 +msgid "" +"Remember position and Start on top are not available " +"on Wayland." +msgstr "" + +#. (itstool) path: info/desc +#: C/selections.page:6 +msgid "How to play and repeat a selection" +msgstr "" + +#. (itstool) path: page/title +#: C/selections.page:14 +msgid "Selections" +msgstr "Valinnat" + +#. (itstool) path: page/p +#: C/selections.page:16 +msgid "" +"You can select a piece of the waveform with the mouse. Next time you press " +"Play, it will play the selection only. When it is finished and " +"you press Play again, it will loop the selection once." +msgstr "" + +#. (itstool) path: note/p +#: C/selections.page:18 +msgid "" +"When in selection mode, you can not exit the selection anymore until you " +"deselect it." +msgstr "" + +#. (itstool) path: page/p +#: C/selections.page:20 +msgid "" +"Selections can be made with the mouse (or pointer device) with a left click, " +"holding the mouse button and dragging the pointer. If you click with " +"Shift key pressed, an already existing selection will be enlarged " +"to that point." +msgstr "" + +#. (itstool) path: page/p +#: C/selections.page:22 +msgid "" +"To deselect click once with the left button into the waveform. If the " +"waveform has keyboard focus, you can press Escape." +msgstr "" + +#. (itstool) path: info/desc +#: C/timestamps.page:6 +msgid "Set and go to timestamps" +msgstr "" + +#. (itstool) path: page/title +#: C/timestamps.page:14 +msgid "Timestamps" +msgstr "Aikaleimat" + +#. (itstool) path: page/p +#: C/timestamps.page:16 +msgid "Timestamps help you to navigate in your transcription." +msgstr "" + +#. (itstool) path: note/p +#: C/timestamps.page:19 +msgid "" +"Timestamps look like this: #03:45.2#. You can select them with or without " +"the number signs." +msgstr "" + +#. (itstool) path: section/title +#: C/timestamps.page:23 +msgid "Drag and drop" +msgstr "Vedä ja pudota" + +#. (itstool) path: section/p +#: C/timestamps.page:25 +msgid "" +"If you select the timestamp in the word processor, you can drag and drop it " +"on the Parlatype window and it will go to that position. This is " +"also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." +msgstr "" + +#. (itstool) path: section/title +#: C/timestamps.page:29 +msgid "Using the clipboard" +msgstr "Leikepöydän käyttäminen" + +#. (itstool) path: section/p +#: C/timestamps.page:31 +msgid "" +"First make sure, the Parlatype window has focus. With the key " +"sequence Ctrlc the current timestamp " +"is copied to the clipboard. Changing to the word processor you can insert " +"now the timestamp in your transcription." +msgstr "" + +#. (itstool) path: section/p +#: C/timestamps.page:32 +msgid "" +"To go to a timestamp position, copy the timestamp in the word processor to " +"the clipboard. Once you have changed focus to Parlatype press " +"Ctrlv." +msgstr "" + +#. (itstool) path: info/desc +#: C/libreoffice-helpers.page:7 +msgid "Use Parlatype with LibreOffice" +msgstr "Parlatypen käyttäminen LibreOfficen kanssa" + +#. (itstool) path: page/title +#. (itstool) path: table/title +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 +msgid "LibreOffice Helpers" +msgstr "LibreOffice-avustajat" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:17 +msgid "" +"LibreOffice Helpers let you control Parlatype from " +"LibreOffice. For example, you can jump easily to timestamps." +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:19 +msgid "" +"To use them, you have to assign keyboard shortcuts in LibreOffice " +"itself. To do this, open LibreOffice, go to menu Tools " +"and select Customize." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:21 +msgctxt "_" +msgid "" +"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" +msgstr "" +"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:23 +msgid "" +"Go to tab Keyboard. In the lower part, Functions, " +"there is a list called Category. At the end of that list you'll " +"find the entry LibreOffice Macros. There is a subcategory " +"share which has a subcategory Parlatype. After " +"selecting Parlatype there will be a list of functions in the " +"Functions list. Choose the function you'd like to use, select " +"from the list Shortcut keys above a shortcut and click on the " +"button Modify." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:25 +msgctxt "_" +msgid "" +"external ref='figures/lo-customize.png' " +"md5='081564921275129bee7bbd10220547e7'" +msgstr "" +"external ref='figures/lo-customize.png' " +"md5='081564921275129bee7bbd10220547e7'" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:27 +msgid "You can select any of these functions:" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:33 +msgid "Helper's name" +msgstr "Avustajan nimi" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:34 +msgid "What it does" +msgstr "Mitä se tekee" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:40 +msgid "" +"Toggles between play and pause. Depending on your preferences set in " +"Parlatype it will rewind a few seconds on pause." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:44 +msgid "" +"Jumps back a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:48 +msgid "" +"Jumps forward a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:52 +msgid "" +"Inserts the current timestamp at the cursor's position. It does not " +"overwrite any selection." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:56 +msgid "The same as above, but on a new line." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:60 +msgid "" +"If the cursor is set on a timestamp, it will jump to that position. The " +"cursor has to be somewhere between the two number signs (#). Don't select " +"the timestamp, just put the cursor inside." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:64 +msgid "Increases playback speed." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:68 +msgid "Decreases playback speed." +msgstr "" diff -Nru parlatype-1.5.4/help/fi/first-steps.page parlatype-1.5.6/help/fi/first-steps.page --- parlatype-1.5.4/help/fi/first-steps.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/first-steps.page 2018-08-17 10:46:14.000000000 +0000 @@ -0,0 +1,34 @@ + + + + + First steps with Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +First steps with Parlatype + +

Parlatype is an easy to use audio player to help you transcribing or annotating recorded speech. You need to run a word processor, e.g. LibreOffice, too. Launch Parlatype and open an audio file by clicking on the Open button in the upper left corner.

+ + +

You can also drag and drop a file on Parlatype or open the recently used files in the Application menu.

+ + +

Now in the upper left corner there is a Play button which toggles between play and pause. Whenever you pause, Parlatype rewinds a few seconds to make it easier to resume. This can be changed in the .

+ + + +

The buttons Jump back and Jump forward in the lower left corner skip a few seconds back or ahead. The amount of time can be changed in the .

+ +

The view scrolls automatically so that the cursor is always visible. You can scroll manually by clicking on or dragging the scroll bar or using the standard keybindings. Automatic scrolling is stopped then.

+ +

To get back to the cursor's position and let the view scroll automatically again, click on the Go to button next to the time label. Clicking on the Play button also turns automatic scrolling on.

+ +

Clicking in the view with the right mouse button will put the cursor there, also holding the right mouse button pressed and moving it. The left mouse button is for .

+ +

The speed scale next to the volume button in the lower right corner lets you adjust the speed of playback. A value of 1 means normal speed, everything lower (down to 0.5) is slower, everything above is faster.

+ diff -Nru parlatype-1.5.4/help/fi/index.page parlatype-1.5.6/help/fi/index.page --- parlatype-1.5.4/help/fi/index.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/index.page 2018-08-17 10:46:14.000000000 +0000 @@ -0,0 +1,28 @@ + + + + +Parlatype +Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + +Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech. + + + + + <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> + Parlatype + + +

Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech.

+

For a quick overview have a look at . Other topics are covered below.

+ +
+ Ohjeen aihealueet +
+ + diff -Nru parlatype-1.5.4/help/fi/keyboard-shortcuts.page parlatype-1.5.6/help/fi/keyboard-shortcuts.page --- parlatype-1.5.4/help/fi/keyboard-shortcuts.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/keyboard-shortcuts.page 2018-08-17 10:46:14.000000000 +0000 @@ -0,0 +1,77 @@ + + + + + Standard keyboard shortcuts in Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Pikanäppäimet + +

Keyboard shortcuts for Parlatype control, like Play, are described in . Shortcut keys for the window are listed below.

+ + + Standard Shortcut keys + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

To Do This

Press This

Näytä ohje

F1

Avaa tiedosto

Ctrlo

Avaa viimeisimmät tiedostot

Ctrlr

Play/Pause

CtrlSpace

Siirry…

Ctrlg

Jump back

CtrlLeft

Jump forward

CtrlRight

Kopioi aikaleima

Ctrlc

Insert timestamp

Ctrlv

Lähennä

Ctrl+

Loitonna

Ctrl-

Lopeta

Ctrlq

+ + diff -Nru parlatype-1.5.4/help/fi/legal.xml parlatype-1.5.6/help/fi/legal.xml --- parlatype-1.5.4/help/fi/legal.xml 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/legal.xml 2018-08-17 10:46:14.000000000 +0000 @@ -0,0 +1,8 @@ + + + +

This work is licensed under a + Creative Commons + Attribution-ShareAlike 4.0 International license.

+ + diff -Nru parlatype-1.5.4/help/fi/libreoffice-helpers.page parlatype-1.5.6/help/fi/libreoffice-helpers.page --- parlatype-1.5.4/help/fi/libreoffice-helpers.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/libreoffice-helpers.page 2018-08-17 10:46:14.000000000 +0000 @@ -0,0 +1,71 @@ + + + + + Parlatypen käyttäminen LibreOfficen kanssa + + Gabor Karsay + gabor.karsay@gmx.at + + + + +LibreOffice-avustajat + +

LibreOffice Helpers let you control Parlatype from LibreOffice. For example, you can jump easily to timestamps.

+ +

To use them, you have to assign keyboard shortcuts in LibreOffice itself. To do this, open LibreOffice, go to menu Tools and select Customize.

+ + + +

Go to tab Keyboard. In the lower part, Functions, there is a list called Category. At the end of that list you'll find the entry LibreOffice Macros. There is a subcategory share which has a subcategory Parlatype. After selecting Parlatype there will be a list of functions in the Functions list. Choose the function you'd like to use, select from the list Shortcut keys above a shortcut and click on the button Modify.

+ + + +

You can select any of these functions:

+ + + LibreOffice-avustajat + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

Avustajan nimi

Mitä se tekee

PlayPause

Toggles between play and pause. Depending on your preferences set in Parlatype it will rewind a few seconds on pause.

JumpBack

Jumps back a few seconds, depending on the preferences you set in Parlatype.

JumpForward

Jumps forward a few seconds, depending on the preferences you set in Parlatype.

InsertTimestamp

Inserts the current timestamp at the cursor's position. It does not overwrite any selection.

InsertTimestampOnNewLine

The same as above, but on a new line.

GotoTimestamp

If the cursor is set on a timestamp, it will jump to that position. The cursor has to be somewhere between the two number signs (#). Don't select the timestamp, just put the cursor inside.

IncreaseSpeed

Increases playback speed.

DecreaseSpeed

Decreases playback speed.

+ + diff -Nru parlatype-1.5.4/help/fi/media-keys.page parlatype-1.5.6/help/fi/media-keys.page --- parlatype-1.5.4/help/fi/media-keys.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/media-keys.page 2018-08-17 10:46:14.000000000 +0000 @@ -0,0 +1,36 @@ + + + + + How to control Parlatype with media keys + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Medianäppäimet + +

Parlatype's basic functions can be controlled with so called media keys. Media keys are used system wide to control media players and they are working even if the media player is not in focus or in the background.

+ +

You can change the media keys in GNOME settings. You can use dedicated keys from a multimedia keyboard or use any other key or combination of keys.

+ + +

This will affect other media players, e.g. Totem or Rhythmbox, as well.

+ + +

Parlatype listens to these key strokes:

+ +

Play, Pause, Stop: Each of these keys toggles between playing and pause.

 +

Rewind, Previous: Each of these keys will jump back the time you selected in Preferences.

 +

Fast Forward, Next: Each of these keys will jump ahead the time you selected in Preferences.

 + + + +

For detailed instructions how to change keyboard shortcuts in GNOME see the official documentation.

+ + +

If you are using a dedicated foot pedal, it should be possible to map the foot pedal signals to any of the keys. This is not well tested, however. Any feedback regarding foot pedals is welcome.

+ + diff -Nru parlatype-1.5.4/help/fi/preferences.page parlatype-1.5.6/help/fi/preferences.page --- parlatype-1.5.4/help/fi/preferences.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/preferences.page 2018-08-17 10:46:14.000000000 +0000 @@ -0,0 +1,58 @@ + + + + + Parlatypen mukauttaminen + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Asetukset + +

You can reach the preferences window in the Application Menu (next to Activities in the top left corner. There are three tabs: Waveform, Controls and Window.

+ +
+Waveform + + + + +

Resolution: The resolution of the waveform image is given in pixels per second, e.g. the default resolution of 100 means, that one second is shown with a width of 100 pixels.

 +

Fixed vs. moving cursor: There are two modes, how to follow the cursor. On slower systems a moving cursor might be smoother.

 +

Show time scale: Turn the time scale on or off.

 + +
+ +
+Controls + + + + +

Jump back on pause: Parlatype will rewind a few seconds on each pause, this way you can easier resume typing. Set this value to 0 if you don't want this behaviour.

 +

Jump back: Configures how many seconds to skip when the Jump back button is pressed.

 +

Jump forward: Configures how many seconds to skip when the Jump forward button is pressed.

 + +
+ +
+Ikkuna + + + + +

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

 +

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

 +

Start on top: This will put Parlatype on start-up on top of other windows. This might be useful if you are working with a maximized word processor and still want to see the Parlatype window.

 + + + +

Remember position and Start on top are not available on Wayland.

+ + +
+ + diff -Nru parlatype-1.5.4/help/fi/selections.page parlatype-1.5.6/help/fi/selections.page --- parlatype-1.5.4/help/fi/selections.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/selections.page 2018-08-17 10:46:14.000000000 +0000 @@ -0,0 +1,23 @@ + + + + + How to play and repeat a selection + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Valinnat + +

You can select a piece of the waveform with the mouse. Next time you press Play, it will play the selection only. When it is finished and you press Play again, it will loop the selection once.

+ +

When in selection mode, you can not exit the selection anymore until you deselect it.

 + +

Selections can be made with the mouse (or pointer device) with a left click, holding the mouse button and dragging the pointer. If you click with Shift key pressed, an already existing selection will be enlarged to that point.

+ +

To deselect click once with the left button into the waveform. If the waveform has keyboard focus, you can press Escape.

+ + diff -Nru parlatype-1.5.4/help/fi/timestamps.page parlatype-1.5.6/help/fi/timestamps.page --- parlatype-1.5.4/help/fi/timestamps.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/fi/timestamps.page 2018-08-17 10:46:14.000000000 +0000 @@ -0,0 +1,34 @@ + + + + + Set and go to timestamps + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Aikaleimat + +

Timestamps help you to navigate in your transcription.

+ + +

Timestamps look like this: #03:45.2#. You can select them with or without the number signs.

+ + +
+Vedä ja pudota + +

If you select the timestamp in the word processor, you can drag and drop it on the Parlatype window and it will go to that position. This is also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it.

+
+ +
+Leikepöydän käyttäminen + +

First make sure, the Parlatype window has focus. With the key sequence Ctrlc the current timestamp is copied to the clipboard. Changing to the word processor you can insert now the timestamp in your transcription.

+

To go to a timestamp position, copy the timestamp in the word processor to the clipboard. Once you have changed focus to Parlatype press Ctrlv.

+
+ + diff -Nru parlatype-1.5.4/help/he/he.po parlatype-1.5.6/help/he/he.po --- parlatype-1.5.4/help/he/he.po 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/help/he/he.po 2018-06-17 20:35:03.000000000 +0000 @@ -1,7 +1,7 @@ msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" -"POT-Creation-Date: 2017-01-26 22:49+0100\n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -29,9 +29,8 @@ #. (itstool) path: credit/name #: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 -#: C/keyboard-shortcuts.page:8 C/libreoffice-helpers.page:9 -#: C/media-keys.page:8 C/preferences.page:8 C/selections.page:8 -#: C/timestamps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "" @@ -144,7 +143,7 @@ msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " -"md5='1e21a2ddc61fda06238b6b1537191cb3'" +"md5='c57ce9c636f96646e8ba668d290fb352'" msgstr "" #. (itstool) path: page/p @@ -253,180 +252,102 @@ #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 -msgid "Go to …" +msgid "Play/Pause" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 -msgid "Ctrlg" +msgid "CtrlSpace" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 -msgid "Copy timestamp" +msgid "Go to …" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 -msgid "Ctrlc" +msgid "Ctrlg" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 -msgid "Insert timestamp" +msgid "Jump back" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 -msgid "Ctrlv" +msgid "CtrlLeft" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 -msgid "Quit" +msgid "Jump forward" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 -msgid "Ctrlq" -msgstr "" - -#. (itstool) path: p/link -#: C/legal.xml:5 -msgid "Creative Commons Attribution-ShareAlike 4.0 International" -msgstr "" - -#. (itstool) path: license/p -#: C/legal.xml:4 -msgid "This work is licensed under a <_:link-1/> license." -msgstr "" - -#. (itstool) path: info/desc -#: C/libreoffice-helpers.page:7 -msgid "Use Parlatype with LibreOffice" -msgstr "" - -#. (itstool) path: page/title -#. (itstool) path: table/title -#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 -msgid "LibreOffice Helpers" -msgstr "" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:17 -msgid "" -"LibreOffice Helpers let you control Parlatype from " -"LibreOffice. For example, you can jump easily to timestamps." -msgstr "" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:19 -msgid "" -"To use them, you have to assign keyboard shortcuts in LibreOffice " -"itself. To do this, open LibreOffice, go to menu Tools " -"and select Customize." -msgstr "" - -#. (itstool) path: page/media -#. This is a reference to an external file such as an image or video. When -#. the file changes, the md5 hash will change to let you know you need to -#. update your localized copy. The msgstr is not used at all. Set it to -#. whatever you like once you have updated your copy of the file. -#: C/libreoffice-helpers.page:21 -msgctxt "_" -msgid "" -"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" -msgstr "" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:23 -msgid "" -"Go to tab Keyboard. In the lower part, Functions, " -"there is a list called Category. At the end of that list you'll " -"find the entry LibreOffice Macros. There is a subcategory " -"share which has a subcategory Parlatype. After " -"selecting Parlatype there will be a list of functions in the " -"Functions list. Choose the function you'd like to use, select " -"from the list Shortcut keys above a shortcut and click on the " -"button Modify." +msgid "CtrlRight" msgstr "" -#. (itstool) path: page/media -#. This is a reference to an external file such as an image or video. When -#. the file changes, the md5 hash will change to let you know you need to -#. update your localized copy. The msgstr is not used at all. Set it to -#. whatever you like once you have updated your copy of the file. -#: C/libreoffice-helpers.page:25 -msgctxt "_" -msgid "" -"external ref='figures/lo-customize.png' " -"md5='081564921275129bee7bbd10220547e7'" +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 +msgid "Copy timestamp" msgstr "" -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:27 -msgid "You can select any of these functions:" +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:57 +msgid "Ctrlc" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:33 -msgid "Helper's name" +#: C/keyboard-shortcuts.page:60 +msgid "Insert timestamp" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:34 -msgid "What it does" +#: C/keyboard-shortcuts.page:61 +msgid "Ctrlv" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:40 -msgid "" -"Toggles between play and pause. Depending on your preferences set in " -"Parlatype it will rewind a few seconds on pause." +#: C/keyboard-shortcuts.page:64 +msgid "Zoom in" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:44 -msgid "" -"Jumps back a few seconds, depending on the preferences you set in " -"Parlatype." +#: C/keyboard-shortcuts.page:65 +msgid "Ctrl+" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:48 -msgid "" -"Jumps forward a few seconds, depending on the preferences you set in " -"Parlatype." +#: C/keyboard-shortcuts.page:68 +msgid "Zoom out" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:52 -msgid "" -"Inserts the current timestamp at the cursor's position. It does not " -"overwrite any selection." +#: C/keyboard-shortcuts.page:69 +msgid "Ctrl-" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:56 -msgid "The same as above, but on a new line." +#: C/keyboard-shortcuts.page:72 +msgid "Quit" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:60 -msgid "" -"If the cursor is set on a timestamp, it will jump to that position. The " -"cursor has to be somewhere between the two number signs (#). Don't select " -"the timestamp, just put the cursor inside." +#: C/keyboard-shortcuts.page:73 +msgid "Ctrlq" msgstr "" -#. (itstool) path: td/p -#: C/libreoffice-helpers.page:64 -msgid "Increases playback speed." +#. (itstool) path: p/link +#: C/legal.xml:5 +msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "" -#. (itstool) path: td/p -#: C/libreoffice-helpers.page:68 -msgid "Decreases playback speed." +#. (itstool) path: license/p +#: C/legal.xml:4 +msgid "This work is licensed under a <_:link-1/> license." msgstr "" #. (itstool) path: info/desc @@ -612,25 +533,38 @@ msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " -"md5='615d876529cdd45763e78a3ee01b7b3e'" +"md5='6affc475c74223fa48e7de25393fe7de'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" -"Remember position: On start-up Parlatype can position its window " -"where you had it when you closed Parlatype last time. This also " -"remembers the window's size." +"Remember size: On start-up Parlatype sets the window size to the " +"size it had the last time." msgstr "" #. (itstool) path: item/p #: C/preferences.page:49 msgid "" +"Remember position: On start-up Parlatype can position its window " +"where you had it when you closed Parlatype last time." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:50 +msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" +#. (itstool) path: note/p +#: C/preferences.page:54 +msgid "" +"Remember position and Start on top are not available " +"on Wayland." +msgstr "" + #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" @@ -729,3 +663,131 @@ "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" + +#. (itstool) path: info/desc +#: C/libreoffice-helpers.page:7 +msgid "Use Parlatype with LibreOffice" +msgstr "" + +#. (itstool) path: page/title +#. (itstool) path: table/title +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 +msgid "LibreOffice Helpers" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:17 +msgid "" +"LibreOffice Helpers let you control Parlatype from " +"LibreOffice. For example, you can jump easily to timestamps." +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:19 +msgid "" +"To use them, you have to assign keyboard shortcuts in LibreOffice " +"itself. To do this, open LibreOffice, go to menu Tools " +"and select Customize." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:21 +msgctxt "_" +msgid "" +"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:23 +msgid "" +"Go to tab Keyboard. In the lower part, Functions, " +"there is a list called Category. At the end of that list you'll " +"find the entry LibreOffice Macros. There is a subcategory " +"share which has a subcategory Parlatype. After " +"selecting Parlatype there will be a list of functions in the " +"Functions list. Choose the function you'd like to use, select " +"from the list Shortcut keys above a shortcut and click on the " +"button Modify." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:25 +msgctxt "_" +msgid "" +"external ref='figures/lo-customize.png' " +"md5='081564921275129bee7bbd10220547e7'" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:27 +msgid "You can select any of these functions:" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:33 +msgid "Helper's name" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:34 +msgid "What it does" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:40 +msgid "" +"Toggles between play and pause. Depending on your preferences set in " +"Parlatype it will rewind a few seconds on pause." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:44 +msgid "" +"Jumps back a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:48 +msgid "" +"Jumps forward a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:52 +msgid "" +"Inserts the current timestamp at the cursor's position. It does not " +"overwrite any selection." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:56 +msgid "The same as above, but on a new line." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:60 +msgid "" +"If the cursor is set on a timestamp, it will jump to that position. The " +"cursor has to be somewhere between the two number signs (#). Don't select " +"the timestamp, just put the cursor inside." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:64 +msgid "Increases playback speed." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:68 +msgid "Decreases playback speed." +msgstr "" diff -Nru parlatype-1.5.4/help/he/keyboard-shortcuts.page parlatype-1.5.6/help/he/keyboard-shortcuts.page --- parlatype-1.5.4/help/he/keyboard-shortcuts.page 2017-11-18 21:22:31.000000000 +0000 +++ parlatype-1.5.6/help/he/keyboard-shortcuts.page 2018-08-17 10:46:15.000000000 +0000 @@ -36,10 +36,22 @@

Ctrlr

+

Play/Pause

+

CtrlSpace

+ +

Go to …

Ctrlg

+

Jump back

+

CtrlLeft

+ + +

Jump forward

+

CtrlRight

+ +

Copy timestamp

Ctrlc

diff -Nru parlatype-1.5.4/help/id/id.po parlatype-1.5.6/help/id/id.po --- parlatype-1.5.4/help/id/id.po 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/help/id/id.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-26 22:49+0100\n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" "PO-Revision-Date: 2017-02-09 07:45+0000\n" "Last-Translator: Ari Setyo Wibowo \n" "Language-Team: Indonesian \n" +"Language: id\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -37,22 +38,15 @@ msgstr "Parlatype" #. (itstool) path: credit/name -#: C/index.page:10 -#: C/drag-and-drop.page:8 -#: C/first-steps.page:8 -#: C/keyboard-shortcuts.page:8 -#: C/libreoffice-helpers.page:9 -#: C/media-keys.page:8 -#: C/preferences.page:8 -#: C/selections.page:8 -#: C/timestamps.page:8 +#: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p -#: C/index.page:14 -#: C/index.page:23 +#: C/index.page:14 C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." @@ -111,19 +105,18 @@ #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" -"File names: Select a file name from a word processor, e.g. " -"LibreOffice, drop the selected text on Parlatype and " -"it will open that file. This will always work if the selection contains a " -"full path. If you select the name only, Parlatype will look up " -"its full path in the list of recent files and open it if it can find it in " -"that list." +"File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " +"file. This will always work if the selection contains a full path. If you " +"select the name only, Parlatype will look up its full path in the " +"list of recent files and open it if it can find it in that list." msgstr "" "Nama berkas: Pilih sebuah nama berkas dari suatu pemroses kata, seperti. " "LibreOffice, jatuhkan teks terpilih pada Parlatype dan " "ia akan membuka berkas tersebut. Ini akan selalu bekerja jika pilihan " -"mengandung alamat penuh. Jika Anda hanya memilih nama saja, " -"Parlatype akan mencari alamat penuh dalam daftar berkas terakhir " -"dan akan membukanya jika tidak menemukan dari daftar." +"mengandung alamat penuh. Jika Anda hanya memilih nama saja, Parlatype akan mencari alamat penuh dalam daftar berkas terakhir dan akan " +"membukanya jika tidak menemukan dari daftar." #. (itstool) path: item/p #: C/drag-and-drop.page:21 @@ -143,8 +136,7 @@ #. (itstool) path: info/desc #. (itstool) path: page/title -#: C/first-steps.page:6 -#: C/first-steps.page:14 +#: C/first-steps.page:6 C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "Langkah pertama dengan Parlatype" @@ -168,9 +160,8 @@ "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." msgstr "" -"Anda juga dapat menyeret dan menjatuhkan sebuah berkas pada " -"Parlatype atau buka berkas yang terakhir digunakan di menu " -"Aplikasi." +"Anda juga dapat menyeret dan menjatuhkan sebuah berkas pada Parlatype atau buka berkas yang terakhir digunakan di menu Aplikasi." #. (itstool) path: page/p #: C/first-steps.page:22 @@ -191,10 +182,11 @@ #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 +#, fuzzy msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " -"md5='1e21a2ddc61fda06238b6b1537191cb3'" +"md5='c57ce9c636f96646e8ba668d290fb352'" msgstr "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" @@ -273,9 +265,9 @@ "are described in . Shortcut keys for the window are " "listed below." msgstr "" -"Pintasan papan ketik untuk kendali Parlatype, seperti " -"Main, dideskripsikan di . Tombol pintasan " -"untuk jendela terdaftar di bawah ini." +"Pintasan papan ketik untuk kendali Parlatype, seperti Main, dideskripsikan di . Tombol pintasan untuk " +"jendela terdaftar di bawah ini." #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 @@ -324,210 +316,108 @@ #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 -msgid "Go to …" -msgstr "Pergi ke …" +msgid "Play/Pause" +msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 -msgid "Ctrlg" -msgstr "Ctrlg" +#, fuzzy +msgid "CtrlSpace" +msgstr "Ctrlc" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 -msgid "Copy timestamp" -msgstr "Salin informasi waktu" +msgid "Go to …" +msgstr "Pergi ke …" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 -msgid "Ctrlc" -msgstr "Ctrlc" +msgid "Ctrlg" +msgstr "Ctrlg" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 -msgid "Insert timestamp" -msgstr "Masukkan informasi waktu" +msgid "Jump back" +msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 -msgid "Ctrlv" -msgstr "Ctrlv" +#, fuzzy +msgid "CtrlLeft" +msgstr "Ctrlo" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 -msgid "Quit" -msgstr "Keluar" +msgid "Jump forward" +msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 -msgid "Ctrlq" -msgstr "Ctrlq" - -#. (itstool) path: p/link -#: C/legal.xml:5 -msgid "Creative Commons Attribution-ShareAlike 4.0 International" -msgstr "Creative Commons Attribution-ShareAlike 4.0 Internasional" - -#. (itstool) path: license/p -#: C/legal.xml:4 -msgid "This work is licensed under a <_:link-1/> license." -msgstr "Pekerjaan ini dilisensikan di bawah lisensi <_:link-1/>." - -#. (itstool) path: info/desc -#: C/libreoffice-helpers.page:7 -msgid "Use Parlatype with LibreOffice" -msgstr "Gunakan Parlatype dengan LibreOffice" - -#. (itstool) path: page/title -#. (itstool) path: table/title -#: C/libreoffice-helpers.page:15 -#: C/libreoffice-helpers.page:30 -msgid "LibreOffice Helpers" -msgstr "Bantuan LibreOffice" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:17 -msgid "" -"LibreOffice Helpers let you control Parlatype from " -"LibreOffice. For example, you can jump easily to timestamps." -msgstr "" -"Bantuan LibreOffice mengizinkan Anda mengendalikan Parlatype dari " -"LibreOffice. Misalnya, Anda dapat dengan mudah melompat ke " -"informasi waktu." - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:19 -msgid "" -"To use them, you have to assign keyboard shortcuts in LibreOffice " -"itself. To do this, open LibreOffice, go to menu Tools " -"and select Customize." -msgstr "" -"Untuk mengunakannya, Anda harus memasang pintasan papan ketik di " -"LibreOffice sendiri. Untuk melakukannya, buka " -"LibreOffice, pergi ke menu Perkakas dan pilih " -"Kustomasi." - -#. (itstool) path: page/media -#. This is a reference to an external file such as an image or video. When -#. the file changes, the md5 hash will change to let you know you need to -#. update your localized copy. The msgstr is not used at all. Set it to -#. whatever you like once you have updated your copy of the file. -#: C/libreoffice-helpers.page:21 -msgctxt "_" -msgid "" -"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" -msgstr "" -"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:23 -msgid "" -"Go to tab Keyboard. In the lower part, Functions, " -"there is a list called Category. At the end of that list you'll " -"find the entry LibreOffice Macros. There is a subcategory " -"share which has a subcategory Parlatype. After " -"selecting Parlatype there will be a list of functions in the " -"Functions list. Choose the function you'd like to use, select " -"from the list Shortcut keys above a shortcut and click on the " -"button Modify." -msgstr "" -"Pergi ke tab Papan ketik. di bagian bawah, Fungsi, ada " -"daftar yang disebut Kategori. Di akhir daftar tersebut Anda akan " -"menemukan entri Makro LibreOffice. Ada subkategori " -"berbagi yang memiliki subkategori Parlatype. Setelah " -"memilih Parlatype akan ada daftar fungsi di Fungsi. " -"Pilih fungsi yang akan Anda gunakan, Pilih dari daftar Tombol " -"pintasan di atas pintasan dan klik pada tombol Modifikasi." - -#. (itstool) path: page/media -#. This is a reference to an external file such as an image or video. When -#. the file changes, the md5 hash will change to let you know you need to -#. update your localized copy. The msgstr is not used at all. Set it to -#. whatever you like once you have updated your copy of the file. -#: C/libreoffice-helpers.page:25 -msgctxt "_" -msgid "" -"external ref='figures/lo-customize.png' " -"md5='081564921275129bee7bbd10220547e7'" -msgstr "" -"external ref='figures/lo-customize.png' " -"md5='081564921275129bee7bbd10220547e7'" +#, fuzzy +msgid "CtrlRight" +msgstr "Ctrlg" -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:27 -msgid "You can select any of these functions:" -msgstr "Anda dapat memilih fungsi yang mana saja:" +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 +msgid "Copy timestamp" +msgstr "Salin informasi waktu" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:33 -msgid "Helper's name" -msgstr "Nama penolong" +#: C/keyboard-shortcuts.page:57 +msgid "Ctrlc" +msgstr "Ctrlc" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:34 -msgid "What it does" -msgstr "Apa yang dilakukan" +#: C/keyboard-shortcuts.page:60 +msgid "Insert timestamp" +msgstr "Masukkan informasi waktu" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:40 -msgid "" -"Toggles between play and pause. Depending on your preferences set in " -"Parlatype it will rewind a few seconds on pause." -msgstr "" -"Beralih antara main dan jeda. Tergantung pada preferensi yang Anda tentukan " -"di Parlatype akan diputar kembali beberapa detik saat jeda." +#: C/keyboard-shortcuts.page:61 +msgid "Ctrlv" +msgstr "Ctrlv" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:44 -msgid "" -"Jumps back a few seconds, depending on the preferences you set in " -"Parlatype." +#: C/keyboard-shortcuts.page:64 +msgid "Zoom in" msgstr "" -"Lompat mundur beberapa detik, tergantung preferensi yang Anda tentukan di " -"Parlatype." #. (itstool) path: td/p -#: C/libreoffice-helpers.page:48 -msgid "" -"Jumps forward a few seconds, depending on the preferences you set in " -"Parlatype." -msgstr "" -"Lompat maju beberapa detik, tergantung preferensi yang Anda tentukan di " -"Parlatype." +#: C/keyboard-shortcuts.page:65 +#, fuzzy +msgid "Ctrl+" +msgstr "Ctrlo" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:52 -msgid "" -"Inserts the current timestamp at the cursor's position. It does not " -"overwrite any selection." +#: C/keyboard-shortcuts.page:68 +msgid "Zoom out" msgstr "" -"Masukkan informasi waktu saat ini pada posisi kursor. Itu tidak menimpa " -"pilihan manapun." #. (itstool) path: td/p -#: C/libreoffice-helpers.page:56 -msgid "The same as above, but on a new line." -msgstr "Sama dengan atas, tapi di baris baru." +#: C/keyboard-shortcuts.page:69 +#, fuzzy +msgid "Ctrl-" +msgstr "Ctrlo" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:60 -msgid "" -"If the cursor is set on a timestamp, it will jump to that position. The " -"cursor has to be somewhere between the two number signs (#). Don't select " -"the timestamp, just put the cursor inside." -msgstr "" -"Jika kursor ditentukan pada informasi waktu, ia akan lompat ke posisi " -"tersebut. Kursor harus berada di suatu tempat di antara dua tanda nomor (#). " -"Jangan pilih informasi waktu, tinggal letakkan kursor di dalamnya." +#: C/keyboard-shortcuts.page:72 +msgid "Quit" +msgstr "Keluar" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:64 -msgid "Increases playback speed." -msgstr "Tambah kecepatan main." +#: C/keyboard-shortcuts.page:73 +msgid "Ctrlq" +msgstr "Ctrlq" -#. (itstool) path: td/p -#: C/libreoffice-helpers.page:68 -msgid "Decreases playback speed." -msgstr "Kurangi kecepatan main." +#. (itstool) path: p/link +#: C/legal.xml:5 +msgid "Creative Commons Attribution-ShareAlike 4.0 International" +msgstr "Creative Commons Attribution-ShareAlike 4.0 Internasional" + +#. (itstool) path: license/p +#: C/legal.xml:4 +msgid "This work is licensed under a <_:link-1/> license." +msgstr "Pekerjaan ini dilisensikan di bawah lisensi <_:link-1/>." #. (itstool) path: info/desc #: C/media-keys.page:6 @@ -735,8 +625,8 @@ "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." msgstr "" -"Lompat maju: Atur berapa detik untuk melewati saat tombol Lompat " -"maju ditekan." +"Lompat maju: Atur berapa detik untuk melewati saat tombol Lompat maju ditekan." #. (itstool) path: section/title #: C/preferences.page:43 @@ -749,10 +639,11 @@ #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:45 +#, fuzzy msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " -"md5='615d876529cdd45763e78a3ee01b7b3e'" +"md5='6affc475c74223fa48e7de25393fe7de'" msgstr "" "external ref='figures/parlatype-prefs-window.png' " "md5='615d876529cdd45763e78a3ee01b7b3e'" @@ -760,16 +651,23 @@ #. (itstool) path: item/p #: C/preferences.page:48 msgid "" +"Remember size: On start-up Parlatype sets the window size to the " +"size it had the last time." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:49 +#, fuzzy +msgid "" "Remember position: On start-up Parlatype can position its window " -"where you had it when you closed Parlatype last time. This also " -"remembers the window's size." +"where you had it when you closed Parlatype last time." msgstr "" "Ingat posisi: Saat start-up Parlatype dapat memosisikan " "jendelanya dimana Anda menutup Parlatype terakhir kali. Ini juga " "mengingat ukuran jendela." #. (itstool) path: item/p -#: C/preferences.page:49 +#: C/preferences.page:50 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " @@ -777,8 +675,15 @@ msgstr "" "Mulai di atas: Ini akan meletakkan Parlatype saat start-up di " "atas jendela lainnya. Ini mungkin berguna saat Anda bekerja dengan pengolah " -"kata yang termaksimalkan dan tetap ingin melihat jendela " -"Parlatype." +"kata yang termaksimalkan dan tetap ingin melihat jendela Parlatype." + +#. (itstool) path: note/p +#: C/preferences.page:54 +msgid "" +"Remember position and Start on top are not available " +"on Wayland." +msgstr "" #. (itstool) path: info/desc #: C/selections.page:6 @@ -867,8 +772,8 @@ msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " -"also possible the other way round: Drag the time label from " -"Parlatype to a word processor and drop it there to insert it." +"also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." msgstr "" "Jika Anda memilih informasi waktu di pengolah kata, Anda dapat menyeret dan " "menjatuhkannya pada jendela Parlatype dan ia akan pergi ke posisi " @@ -904,3 +809,158 @@ "Untuk pergi ke posisi informasi waktu, salin informasi waktu di pengolah " "kata ke papan salinan. Setelah Anda berpindah fokus ke Parlatype " "tekan Ctrlv." + +#. (itstool) path: info/desc +#: C/libreoffice-helpers.page:7 +msgid "Use Parlatype with LibreOffice" +msgstr "Gunakan Parlatype dengan LibreOffice" + +#. (itstool) path: page/title +#. (itstool) path: table/title +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 +msgid "LibreOffice Helpers" +msgstr "Bantuan LibreOffice" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:17 +msgid "" +"LibreOffice Helpers let you control Parlatype from " +"LibreOffice. For example, you can jump easily to timestamps." +msgstr "" +"Bantuan LibreOffice mengizinkan Anda mengendalikan Parlatype dari " +"LibreOffice. Misalnya, Anda dapat dengan mudah melompat ke " +"informasi waktu." + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:19 +msgid "" +"To use them, you have to assign keyboard shortcuts in LibreOffice " +"itself. To do this, open LibreOffice, go to menu Tools " +"and select Customize." +msgstr "" +"Untuk mengunakannya, Anda harus memasang pintasan papan ketik di " +"LibreOffice sendiri. Untuk melakukannya, buka LibreOffice, pergi ke menu Perkakas dan pilih Kustomasi." + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:21 +msgctxt "_" +msgid "" +"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" +msgstr "" +"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:23 +msgid "" +"Go to tab Keyboard. In the lower part, Functions, " +"there is a list called Category. At the end of that list you'll " +"find the entry LibreOffice Macros. There is a subcategory " +"share which has a subcategory Parlatype. After " +"selecting Parlatype there will be a list of functions in the " +"Functions list. Choose the function you'd like to use, select " +"from the list Shortcut keys above a shortcut and click on the " +"button Modify." +msgstr "" +"Pergi ke tab Papan ketik. di bagian bawah, Fungsi, ada " +"daftar yang disebut Kategori. Di akhir daftar tersebut Anda akan " +"menemukan entri Makro LibreOffice. Ada subkategori berbagi yang memiliki subkategori Parlatype. Setelah memilih " +"Parlatype akan ada daftar fungsi di Fungsi. Pilih " +"fungsi yang akan Anda gunakan, Pilih dari daftar Tombol pintasan " +"di atas pintasan dan klik pada tombol Modifikasi." + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:25 +msgctxt "_" +msgid "" +"external ref='figures/lo-customize.png' " +"md5='081564921275129bee7bbd10220547e7'" +msgstr "" +"external ref='figures/lo-customize.png' " +"md5='081564921275129bee7bbd10220547e7'" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:27 +msgid "You can select any of these functions:" +msgstr "Anda dapat memilih fungsi yang mana saja:" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:33 +msgid "Helper's name" +msgstr "Nama penolong" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:34 +msgid "What it does" +msgstr "Apa yang dilakukan" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:40 +msgid "" +"Toggles between play and pause. Depending on your preferences set in " +"Parlatype it will rewind a few seconds on pause." +msgstr "" +"Beralih antara main dan jeda. Tergantung pada preferensi yang Anda tentukan " +"di Parlatype akan diputar kembali beberapa detik saat jeda." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:44 +msgid "" +"Jumps back a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" +"Lompat mundur beberapa detik, tergantung preferensi yang Anda tentukan di " +"Parlatype." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:48 +msgid "" +"Jumps forward a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" +"Lompat maju beberapa detik, tergantung preferensi yang Anda tentukan di " +"Parlatype." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:52 +msgid "" +"Inserts the current timestamp at the cursor's position. It does not " +"overwrite any selection." +msgstr "" +"Masukkan informasi waktu saat ini pada posisi kursor. Itu tidak menimpa " +"pilihan manapun." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:56 +msgid "The same as above, but on a new line." +msgstr "Sama dengan atas, tapi di baris baru." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:60 +msgid "" +"If the cursor is set on a timestamp, it will jump to that position. The " +"cursor has to be somewhere between the two number signs (#). Don't select " +"the timestamp, just put the cursor inside." +msgstr "" +"Jika kursor ditentukan pada informasi waktu, ia akan lompat ke posisi " +"tersebut. Kursor harus berada di suatu tempat di antara dua tanda nomor (#). " +"Jangan pilih informasi waktu, tinggal letakkan kursor di dalamnya." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:64 +msgid "Increases playback speed." +msgstr "Tambah kecepatan main." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:68 +msgid "Decreases playback speed." +msgstr "Kurangi kecepatan main." diff -Nru parlatype-1.5.4/help/id/keyboard-shortcuts.page parlatype-1.5.6/help/id/keyboard-shortcuts.page --- parlatype-1.5.4/help/id/keyboard-shortcuts.page 2017-11-18 21:22:32.000000000 +0000 +++ parlatype-1.5.6/help/id/keyboard-shortcuts.page 2018-08-17 10:46:15.000000000 +0000 @@ -36,10 +36,22 @@

Ctrlr

+

Play/Pause

+

CtrlSpace

+ +

Pergi ke …

Ctrlg

+

Jump back

+

CtrlLeft

+ + +

Jump forward

+

CtrlRight

+ +

Salin informasi waktu

Ctrlc

diff -Nru parlatype-1.5.4/help/it/it.po parlatype-1.5.6/help/it/it.po --- parlatype-1.5.4/help/it/it.po 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/help/it/it.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-26 22:49+0100\n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" "PO-Revision-Date: 2017-01-18 08:46+0000\n" "Last-Translator: Luca Ciavatta \n" "Language-Team: Italian \n" @@ -39,9 +39,8 @@ #. (itstool) path: credit/name #: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 -#: C/keyboard-shortcuts.page:8 C/libreoffice-helpers.page:9 -#: C/media-keys.page:8 C/preferences.page:8 C/selections.page:8 -#: C/timestamps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "Gabor Karsay" @@ -162,7 +161,7 @@ msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " -"md5='1e21a2ddc61fda06238b6b1537191cb3'" +"md5='c57ce9c636f96646e8ba668d290fb352'" msgstr "" #. (itstool) path: page/p @@ -271,187 +270,108 @@ #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 -msgid "Go to …" -msgstr "Vai a ..." +msgid "Play/Pause" +msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 -msgid "Ctrlg" -msgstr "Ctrlg" +#, fuzzy +msgid "CtrlSpace" +msgstr "Ctrlc" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 -msgid "Copy timestamp" -msgstr "Copia marca temporale" +msgid "Go to …" +msgstr "Vai a ..." #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 -msgid "Ctrlc" -msgstr "Ctrlc" +msgid "Ctrlg" +msgstr "Ctrlg" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 -msgid "Insert timestamp" -msgstr "Inserisci marca temporale" +msgid "Jump back" +msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 -msgid "Ctrlv" -msgstr "Ctrlv" +#, fuzzy +msgid "CtrlLeft" +msgstr "Ctrlr" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 -msgid "Quit" -msgstr "Esci" +msgid "Jump forward" +msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 -msgid "Ctrlq" -msgstr "Ctrlq" - -#. (itstool) path: p/link -#: C/legal.xml:5 -msgid "Creative Commons Attribution-ShareAlike 4.0 International" -msgstr "Creative Commons Attribution-ShareAlike 4.0 International" - -#. (itstool) path: license/p -#: C/legal.xml:4 -msgid "This work is licensed under a <_:link-1/> license." -msgstr "Questo lavoro è rilasciato sotto licenza <_:link-1/>." - -#. (itstool) path: info/desc -#: C/libreoffice-helpers.page:7 -msgid "Use Parlatype with LibreOffice" -msgstr "Utilizzare Parlatype con LibreOffice" - -#. (itstool) path: page/title -#. (itstool) path: table/title -#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 -msgid "LibreOffice Helpers" -msgstr "" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:17 -msgid "" -"LibreOffice Helpers let you control Parlatype from " -"LibreOffice. For example, you can jump easily to timestamps." -msgstr "" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:19 -msgid "" -"To use them, you have to assign keyboard shortcuts in LibreOffice " -"itself. To do this, open LibreOffice, go to menu Tools " -"and select Customize." -msgstr "" - -#. (itstool) path: page/media -#. This is a reference to an external file such as an image or video. When -#. the file changes, the md5 hash will change to let you know you need to -#. update your localized copy. The msgstr is not used at all. Set it to -#. whatever you like once you have updated your copy of the file. -#: C/libreoffice-helpers.page:21 -msgctxt "_" -msgid "" -"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" -msgstr "" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:23 -msgid "" -"Go to tab Keyboard. In the lower part, Functions, " -"there is a list called Category. At the end of that list you'll " -"find the entry LibreOffice Macros. There is a subcategory " -"share which has a subcategory Parlatype. After " -"selecting Parlatype there will be a list of functions in the " -"Functions list. Choose the function you'd like to use, select " -"from the list Shortcut keys above a shortcut and click on the " -"button Modify." -msgstr "" - -#. (itstool) path: page/media -#. This is a reference to an external file such as an image or video. When -#. the file changes, the md5 hash will change to let you know you need to -#. update your localized copy. The msgstr is not used at all. Set it to -#. whatever you like once you have updated your copy of the file. -#: C/libreoffice-helpers.page:25 -msgctxt "_" -msgid "" -"external ref='figures/lo-customize.png' " -"md5='081564921275129bee7bbd10220547e7'" -msgstr "" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:27 -msgid "You can select any of these functions:" -msgstr "È possibile selezionare le seguenti funzioni:" +#, fuzzy +msgid "CtrlRight" +msgstr "Ctrlg" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:33 -msgid "Helper's name" -msgstr "" +#: C/keyboard-shortcuts.page:56 +msgid "Copy timestamp" +msgstr "Copia marca temporale" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:34 -msgid "What it does" -msgstr "Che cosa fa" +#: C/keyboard-shortcuts.page:57 +msgid "Ctrlc" +msgstr "Ctrlc" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:40 -msgid "" -"Toggles between play and pause. Depending on your preferences set in " -"Parlatype it will rewind a few seconds on pause." -msgstr "" +#: C/keyboard-shortcuts.page:60 +msgid "Insert timestamp" +msgstr "Inserisci marca temporale" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:44 -msgid "" -"Jumps back a few seconds, depending on the preferences you set in " -"Parlatype." -msgstr "" -"Indietro di qualche secondo, dipende dalle preferenze impostate in " -"Parlatype." +#: C/keyboard-shortcuts.page:61 +msgid "Ctrlv" +msgstr "Ctrlv" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:48 -msgid "" -"Jumps forward a few seconds, depending on the preferences you set in " -"Parlatype." +#: C/keyboard-shortcuts.page:64 +msgid "Zoom in" msgstr "" -"Avanti di qualche secondo, dipende dalle preferenze impostate in " -"Parlatype." #. (itstool) path: td/p -#: C/libreoffice-helpers.page:52 -msgid "" -"Inserts the current timestamp at the cursor's position. It does not " -"overwrite any selection." -msgstr "" -"Inserisce la marca temporale alla posizione corrente del cursore. Non " -"sovrascrive alcuna selezione." +#: C/keyboard-shortcuts.page:65 +#, fuzzy +msgid "Ctrl+" +msgstr "Ctrlr" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:56 -msgid "The same as above, but on a new line." +#: C/keyboard-shortcuts.page:68 +msgid "Zoom out" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:60 -msgid "" -"If the cursor is set on a timestamp, it will jump to that position. The " -"cursor has to be somewhere between the two number signs (#). Don't select " -"the timestamp, just put the cursor inside." -msgstr "" +#: C/keyboard-shortcuts.page:69 +#, fuzzy +msgid "Ctrl-" +msgstr "Ctrlr" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:64 -msgid "Increases playback speed." -msgstr "Aumenta la velocità di riproduzione." +#: C/keyboard-shortcuts.page:72 +msgid "Quit" +msgstr "Esci" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:68 -msgid "Decreases playback speed." -msgstr "Diminuisce la velocità di riproduzione." +#: C/keyboard-shortcuts.page:73 +msgid "Ctrlq" +msgstr "Ctrlq" + +#. (itstool) path: p/link +#: C/legal.xml:5 +msgid "Creative Commons Attribution-ShareAlike 4.0 International" +msgstr "Creative Commons Attribution-ShareAlike 4.0 International" + +#. (itstool) path: license/p +#: C/legal.xml:4 +msgid "This work is licensed under a <_:link-1/> license." +msgstr "Questo lavoro è rilasciato sotto licenza <_:link-1/>." #. (itstool) path: info/desc #: C/media-keys.page:6 @@ -636,25 +556,38 @@ msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " -"md5='615d876529cdd45763e78a3ee01b7b3e'" +"md5='6affc475c74223fa48e7de25393fe7de'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" -"Remember position: On start-up Parlatype can position its window " -"where you had it when you closed Parlatype last time. This also " -"remembers the window's size." +"Remember size: On start-up Parlatype sets the window size to the " +"size it had the last time." msgstr "" #. (itstool) path: item/p #: C/preferences.page:49 msgid "" +"Remember position: On start-up Parlatype can position its window " +"where you had it when you closed Parlatype last time." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:50 +msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" +#. (itstool) path: note/p +#: C/preferences.page:54 +msgid "" +"Remember position and Start on top are not available " +"on Wayland." +msgstr "" + #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" @@ -753,3 +686,137 @@ "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" + +#. (itstool) path: info/desc +#: C/libreoffice-helpers.page:7 +msgid "Use Parlatype with LibreOffice" +msgstr "Utilizzare Parlatype con LibreOffice" + +#. (itstool) path: page/title +#. (itstool) path: table/title +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 +msgid "LibreOffice Helpers" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:17 +msgid "" +"LibreOffice Helpers let you control Parlatype from " +"LibreOffice. For example, you can jump easily to timestamps." +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:19 +msgid "" +"To use them, you have to assign keyboard shortcuts in LibreOffice " +"itself. To do this, open LibreOffice, go to menu Tools " +"and select Customize." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:21 +msgctxt "_" +msgid "" +"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:23 +msgid "" +"Go to tab Keyboard. In the lower part, Functions, " +"there is a list called Category. At the end of that list you'll " +"find the entry LibreOffice Macros. There is a subcategory " +"share which has a subcategory Parlatype. After " +"selecting Parlatype there will be a list of functions in the " +"Functions list. Choose the function you'd like to use, select " +"from the list Shortcut keys above a shortcut and click on the " +"button Modify." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:25 +msgctxt "_" +msgid "" +"external ref='figures/lo-customize.png' " +"md5='081564921275129bee7bbd10220547e7'" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:27 +msgid "You can select any of these functions:" +msgstr "È possibile selezionare le seguenti funzioni:" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:33 +msgid "Helper's name" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:34 +msgid "What it does" +msgstr "Che cosa fa" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:40 +msgid "" +"Toggles between play and pause. Depending on your preferences set in " +"Parlatype it will rewind a few seconds on pause." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:44 +msgid "" +"Jumps back a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" +"Indietro di qualche secondo, dipende dalle preferenze impostate in " +"Parlatype." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:48 +msgid "" +"Jumps forward a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" +"Avanti di qualche secondo, dipende dalle preferenze impostate in " +"Parlatype." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:52 +msgid "" +"Inserts the current timestamp at the cursor's position. It does not " +"overwrite any selection." +msgstr "" +"Inserisce la marca temporale alla posizione corrente del cursore. Non " +"sovrascrive alcuna selezione." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:56 +msgid "The same as above, but on a new line." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:60 +msgid "" +"If the cursor is set on a timestamp, it will jump to that position. The " +"cursor has to be somewhere between the two number signs (#). Don't select " +"the timestamp, just put the cursor inside." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:64 +msgid "Increases playback speed." +msgstr "Aumenta la velocità di riproduzione." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:68 +msgid "Decreases playback speed." +msgstr "Diminuisce la velocità di riproduzione." diff -Nru parlatype-1.5.4/help/it/keyboard-shortcuts.page parlatype-1.5.6/help/it/keyboard-shortcuts.page --- parlatype-1.5.4/help/it/keyboard-shortcuts.page 2017-11-18 21:22:32.000000000 +0000 +++ parlatype-1.5.6/help/it/keyboard-shortcuts.page 2018-08-17 10:46:16.000000000 +0000 @@ -36,10 +36,22 @@

Ctrlr

+

Play/Pause

+

CtrlSpace

+ +

Vai a ...

Ctrlg

+

Jump back

+

CtrlLeft

+ + +

Jump forward

+

CtrlRight

+ +

Copia marca temporale

Ctrlc

diff -Nru parlatype-1.5.4/help/ku/keyboard-shortcuts.page parlatype-1.5.6/help/ku/keyboard-shortcuts.page --- parlatype-1.5.4/help/ku/keyboard-shortcuts.page 2017-11-18 21:22:33.000000000 +0000 +++ parlatype-1.5.6/help/ku/keyboard-shortcuts.page 2018-08-17 10:46:17.000000000 +0000 @@ -36,10 +36,22 @@

Ctrlr

+

Play/Pause

+

CtrlSpace

+ +

Go to …

Ctrlg

+

Jump back

+

CtrlLeft

+ + +

Jump forward

+

CtrlRight

+ +

Copy timestamp

Ctrlc

diff -Nru parlatype-1.5.4/help/ku/ku.po parlatype-1.5.6/help/ku/ku.po --- parlatype-1.5.4/help/ku/ku.po 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/help/ku/ku.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-26 22:49+0100\n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" "PO-Revision-Date: 2017-03-17 21:57+0000\n" "Last-Translator: Rokar ✌ \n" "Language-Team: Kurdish \n" +"Language: ku\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -37,22 +38,15 @@ msgstr "Parlatype" #. (itstool) path: credit/name -#: C/index.page:10 -#: C/drag-and-drop.page:8 -#: C/first-steps.page:8 -#: C/keyboard-shortcuts.page:8 -#: C/libreoffice-helpers.page:9 -#: C/media-keys.page:8 -#: C/preferences.page:8 -#: C/selections.page:8 -#: C/timestamps.page:8 +#: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p -#: C/index.page:14 -#: C/index.page:23 +#: C/index.page:14 C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." @@ -102,12 +96,11 @@ #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" -"File names: Select a file name from a word processor, e.g. " -"LibreOffice, drop the selected text on Parlatype and " -"it will open that file. This will always work if the selection contains a " -"full path. If you select the name only, Parlatype will look up " -"its full path in the list of recent files and open it if it can find it in " -"that list." +"File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " +"file. This will always work if the selection contains a full path. If you " +"select the name only, Parlatype will look up its full path in the " +"list of recent files and open it if it can find it in that list." msgstr "" #. (itstool) path: item/p @@ -122,8 +115,7 @@ #. (itstool) path: info/desc #. (itstool) path: page/title -#: C/first-steps.page:6 -#: C/first-steps.page:14 +#: C/first-steps.page:6 C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "" @@ -161,7 +153,7 @@ msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " -"md5='1e21a2ddc61fda06238b6b1537191cb3'" +"md5='c57ce9c636f96646e8ba668d290fb352'" msgstr "" #. (itstool) path: page/p @@ -270,181 +262,102 @@ #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 -msgid "Go to …" +msgid "Play/Pause" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 -msgid "Ctrlg" +msgid "CtrlSpace" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 -msgid "Copy timestamp" +msgid "Go to …" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 -msgid "Ctrlc" +msgid "Ctrlg" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 -msgid "Insert timestamp" +msgid "Jump back" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 -msgid "Ctrlv" +msgid "CtrlLeft" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 -msgid "Quit" -msgstr "Derkeve" +msgid "Jump forward" +msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 -msgid "Ctrlq" -msgstr "" - -#. (itstool) path: p/link -#: C/legal.xml:5 -msgid "Creative Commons Attribution-ShareAlike 4.0 International" -msgstr "" - -#. (itstool) path: license/p -#: C/legal.xml:4 -msgid "This work is licensed under a <_:link-1/> license." -msgstr "" - -#. (itstool) path: info/desc -#: C/libreoffice-helpers.page:7 -msgid "Use Parlatype with LibreOffice" -msgstr "" - -#. (itstool) path: page/title -#. (itstool) path: table/title -#: C/libreoffice-helpers.page:15 -#: C/libreoffice-helpers.page:30 -msgid "LibreOffice Helpers" -msgstr "Alîkarîa LibreOffice" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:17 -msgid "" -"LibreOffice Helpers let you control Parlatype from " -"LibreOffice. For example, you can jump easily to timestamps." -msgstr "" - -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:19 -msgid "" -"To use them, you have to assign keyboard shortcuts in LibreOffice " -"itself. To do this, open LibreOffice, go to menu Tools " -"and select Customize." -msgstr "" - -#. (itstool) path: page/media -#. This is a reference to an external file such as an image or video. When -#. the file changes, the md5 hash will change to let you know you need to -#. update your localized copy. The msgstr is not used at all. Set it to -#. whatever you like once you have updated your copy of the file. -#: C/libreoffice-helpers.page:21 -msgctxt "_" -msgid "" -"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" +msgid "CtrlRight" msgstr "" -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:23 -msgid "" -"Go to tab Keyboard. In the lower part, Functions, " -"there is a list called Category. At the end of that list you'll " -"find the entry LibreOffice Macros. There is a subcategory " -"share which has a subcategory Parlatype. After " -"selecting Parlatype there will be a list of functions in the " -"Functions list. Choose the function you'd like to use, select " -"from the list Shortcut keys above a shortcut and click on the " -"button Modify." -msgstr "" - -#. (itstool) path: page/media -#. This is a reference to an external file such as an image or video. When -#. the file changes, the md5 hash will change to let you know you need to -#. update your localized copy. The msgstr is not used at all. Set it to -#. whatever you like once you have updated your copy of the file. -#: C/libreoffice-helpers.page:25 -msgctxt "_" -msgid "" -"external ref='figures/lo-customize.png' " -"md5='081564921275129bee7bbd10220547e7'" +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 +msgid "Copy timestamp" msgstr "" -#. (itstool) path: page/p -#: C/libreoffice-helpers.page:27 -msgid "You can select any of these functions:" +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:57 +msgid "Ctrlc" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:33 -msgid "Helper's name" +#: C/keyboard-shortcuts.page:60 +msgid "Insert timestamp" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:34 -msgid "What it does" +#: C/keyboard-shortcuts.page:61 +msgid "Ctrlv" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:40 -msgid "" -"Toggles between play and pause. Depending on your preferences set in " -"Parlatype it will rewind a few seconds on pause." +#: C/keyboard-shortcuts.page:64 +msgid "Zoom in" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:44 -msgid "" -"Jumps back a few seconds, depending on the preferences you set in " -"Parlatype." +#: C/keyboard-shortcuts.page:65 +msgid "Ctrl+" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:48 -msgid "" -"Jumps forward a few seconds, depending on the preferences you set in " -"Parlatype." +#: C/keyboard-shortcuts.page:68 +msgid "Zoom out" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:52 -msgid "" -"Inserts the current timestamp at the cursor's position. It does not " -"overwrite any selection." +#: C/keyboard-shortcuts.page:69 +msgid "Ctrl-" msgstr "" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:56 -msgid "The same as above, but on a new line." -msgstr "" +#: C/keyboard-shortcuts.page:72 +msgid "Quit" +msgstr "Derkeve" #. (itstool) path: td/p -#: C/libreoffice-helpers.page:60 -msgid "" -"If the cursor is set on a timestamp, it will jump to that position. The " -"cursor has to be somewhere between the two number signs (#). Don't select " -"the timestamp, just put the cursor inside." +#: C/keyboard-shortcuts.page:73 +msgid "Ctrlq" msgstr "" -#. (itstool) path: td/p -#: C/libreoffice-helpers.page:64 -msgid "Increases playback speed." +#. (itstool) path: p/link +#: C/legal.xml:5 +msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "" -#. (itstool) path: td/p -#: C/libreoffice-helpers.page:68 -msgid "Decreases playback speed." +#. (itstool) path: license/p +#: C/legal.xml:4 +msgid "This work is licensed under a <_:link-1/> license." msgstr "" #. (itstool) path: info/desc @@ -630,25 +543,38 @@ msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " -"md5='615d876529cdd45763e78a3ee01b7b3e'" +"md5='6affc475c74223fa48e7de25393fe7de'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" -"Remember position: On start-up Parlatype can position its window " -"where you had it when you closed Parlatype last time. This also " -"remembers the window's size." +"Remember size: On start-up Parlatype sets the window size to the " +"size it had the last time." msgstr "" #. (itstool) path: item/p #: C/preferences.page:49 msgid "" +"Remember position: On start-up Parlatype can position its window " +"where you had it when you closed Parlatype last time." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:50 +msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" +#. (itstool) path: note/p +#: C/preferences.page:54 +msgid "" +"Remember position and Start on top are not available " +"on Wayland." +msgstr "" + #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" @@ -722,8 +648,8 @@ msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " -"also possible the other way round: Drag the time label from " -"Parlatype to a word processor and drop it there to insert it." +"also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." msgstr "" #. (itstool) path: section/title @@ -747,3 +673,131 @@ "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" + +#. (itstool) path: info/desc +#: C/libreoffice-helpers.page:7 +msgid "Use Parlatype with LibreOffice" +msgstr "" + +#. (itstool) path: page/title +#. (itstool) path: table/title +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 +msgid "LibreOffice Helpers" +msgstr "Alîkarîa LibreOffice" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:17 +msgid "" +"LibreOffice Helpers let you control Parlatype from " +"LibreOffice. For example, you can jump easily to timestamps." +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:19 +msgid "" +"To use them, you have to assign keyboard shortcuts in LibreOffice " +"itself. To do this, open LibreOffice, go to menu Tools " +"and select Customize." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:21 +msgctxt "_" +msgid "" +"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:23 +msgid "" +"Go to tab Keyboard. In the lower part, Functions, " +"there is a list called Category. At the end of that list you'll " +"find the entry LibreOffice Macros. There is a subcategory " +"share which has a subcategory Parlatype. After " +"selecting Parlatype there will be a list of functions in the " +"Functions list. Choose the function you'd like to use, select " +"from the list Shortcut keys above a shortcut and click on the " +"button Modify." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:25 +msgctxt "_" +msgid "" +"external ref='figures/lo-customize.png' " +"md5='081564921275129bee7bbd10220547e7'" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:27 +msgid "You can select any of these functions:" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:33 +msgid "Helper's name" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:34 +msgid "What it does" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:40 +msgid "" +"Toggles between play and pause. Depending on your preferences set in " +"Parlatype it will rewind a few seconds on pause." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:44 +msgid "" +"Jumps back a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:48 +msgid "" +"Jumps forward a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:52 +msgid "" +"Inserts the current timestamp at the cursor's position. It does not " +"overwrite any selection." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:56 +msgid "The same as above, but on a new line." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:60 +msgid "" +"If the cursor is set on a timestamp, it will jump to that position. The " +"cursor has to be somewhere between the two number signs (#). Don't select " +"the timestamp, just put the cursor inside." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:64 +msgid "Increases playback speed." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:68 +msgid "Decreases playback speed." +msgstr "" diff -Nru parlatype-1.5.4/help/lt/keyboard-shortcuts.page parlatype-1.5.6/help/lt/keyboard-shortcuts.page --- parlatype-1.5.4/help/lt/keyboard-shortcuts.page 2017-11-18 21:22:33.000000000 +0000 +++ parlatype-1.5.6/help/lt/keyboard-shortcuts.page 2018-08-17 10:46:16.000000000 +0000 @@ -36,10 +36,22 @@

Valdr

+

Play/Pause

+

CtrlSpace

+ +

Eiti …

Valdg

+

Jump back

+

CtrlLeft

+ + +

Jump forward

+

CtrlRight

+ +

Kopijuoti laiko žymą

Valdc

diff -Nru parlatype-1.5.4/help/lt/lt.po parlatype-1.5.6/help/lt/lt.po --- parlatype-1.5.4/help/lt/lt.po 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/help/lt/lt.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-07-20 16:20+0200\n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" "PO-Revision-Date: 2017-07-16 16:03+0000\n" "Last-Translator: Moo \n" "Language-Team: Lithuanian \n" +"Language: lt\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -37,22 +38,15 @@ msgstr "Parlatype" #. (itstool) path: credit/name -#: C/index.page:10 -#: C/drag-and-drop.page:8 -#: C/first-steps.page:8 -#: C/keyboard-shortcuts.page:8 -#: C/media-keys.page:8 -#: C/preferences.page:8 -#: C/selections.page:8 -#: C/timestamps.page:8 -#: C/libreoffice-helpers.page:9 +#: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p -#: C/index.page:14 -#: C/index.page:23 +#: C/index.page:14 C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." @@ -95,8 +89,8 @@ "You can drop files, file names or timestamps on Parlatype's " "window." msgstr "" -"Jūs galite vilkti failus, failų pavadinimus ar laiko žymes į " -"Parlatype langą." +"Jūs galite vilkti failus, failų pavadinimus ar laiko žymes į Parlatype langą." #. (itstool) path: item/p #: C/drag-and-drop.page:19 @@ -110,19 +104,17 @@ #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" -"File names: Select a file name from a word processor, e.g. " -"LibreOffice, drop the selected text on Parlatype and " -"it will open that file. This will always work if the selection contains a " -"full path. If you select the name only, Parlatype will look up " -"its full path in the list of recent files and open it if it can find it in " -"that list." -msgstr "" -"Failų pavadinimai: Pažymėkite tekstų rengyklėje, pvz., " -"LibreOffice, failo pavadinimą ir vilkite pažymėtą tekstą į " -"Parlatype, ir programa atvers tą failą. Tai visada suveiks, jei " -"žymėjime bus pilnas kelias. Jei pažymėsite tik pavadinimą, " -"Parlatype atliks failo paiešką paskiausiai naudotų failų sąraše " -"ir jeigu jį ras, iš karto atvers." +"File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " +"file. This will always work if the selection contains a full path. If you " +"select the name only, Parlatype will look up its full path in the " +"list of recent files and open it if it can find it in that list." +msgstr "" +"Failų pavadinimai: Pažymėkite tekstų rengyklėje, pvz., LibreOffice, failo pavadinimą ir vilkite pažymėtą tekstą į Parlatype, ir " +"programa atvers tą failą. Tai visada suveiks, jei žymėjime bus pilnas " +"kelias. Jei pažymėsite tik pavadinimą, Parlatype atliks failo " +"paiešką paskiausiai naudotų failų sąraše ir jeigu jį ras, iš karto atvers." #. (itstool) path: item/p #: C/drag-and-drop.page:21 @@ -141,8 +133,7 @@ #. (itstool) path: info/desc #. (itstool) path: page/title -#: C/first-steps.page:6 -#: C/first-steps.page:14 +#: C/first-steps.page:6 C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "Pirmieji žingsniai su Parlatype" @@ -188,10 +179,11 @@ #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 +#, fuzzy msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " -"md5='1e21a2ddc61fda06238b6b1537191cb3'" +"md5='c57ce9c636f96646e8ba668d290fb352'" msgstr "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" @@ -316,61 +308,94 @@ #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 +msgid "Play/Pause" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:41 +#, fuzzy +msgid "CtrlSpace" +msgstr "Valdc" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:44 msgid "Go to …" msgstr "Eiti …" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:41 +#: C/keyboard-shortcuts.page:45 msgid "Ctrlg" msgstr "Valdg" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:44 +#: C/keyboard-shortcuts.page:48 +msgid "Jump back" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:49 +#, fuzzy +msgid "CtrlLeft" +msgstr "Valdo" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:52 +msgid "Jump forward" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:53 +#, fuzzy +msgid "CtrlRight" +msgstr "Valdg" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 msgid "Copy timestamp" msgstr "Kopijuoti laiko žymą" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:45 +#: C/keyboard-shortcuts.page:57 msgid "Ctrlc" msgstr "Valdc" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:48 +#: C/keyboard-shortcuts.page:60 msgid "Insert timestamp" msgstr "Įterpti laiko žymą" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:49 +#: C/keyboard-shortcuts.page:61 msgid "Ctrlv" msgstr "Valdv" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:52 +#: C/keyboard-shortcuts.page:64 msgid "Zoom in" msgstr "Didinti" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:53 +#: C/keyboard-shortcuts.page:65 msgid "Ctrl+" msgstr "Vald+" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:56 +#: C/keyboard-shortcuts.page:68 msgid "Zoom out" msgstr "Mažinti" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:57 +#: C/keyboard-shortcuts.page:69 msgid "Ctrl-" msgstr "Vald-" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:60 +#: C/keyboard-shortcuts.page:72 msgid "Quit" msgstr "Išeiti" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:61 +#: C/keyboard-shortcuts.page:73 msgid "Ctrlq" msgstr "Valdq" @@ -682,8 +707,8 @@ msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " -"also possible the other way round: Drag the time label from " -"Parlatype to a word processor and drop it there to insert it." +"also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." msgstr "" #. (itstool) path: section/title @@ -715,8 +740,7 @@ #. (itstool) path: page/title #. (itstool) path: table/title -#: C/libreoffice-helpers.page:15 -#: C/libreoffice-helpers.page:30 +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "LibreOffice pagelbikliai" diff -Nru parlatype-1.5.4/help/Makefile.am parlatype-1.5.6/help/Makefile.am --- parlatype-1.5.4/help/Makefile.am 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/help/Makefile.am 2018-06-17 20:35:03.000000000 +0000 @@ -29,4 +29,4 @@ libreoffice-helpers.page endif -HELP_LINGUAS = de en_GB es he id it lt ku pt +HELP_LINGUAS = de en_GB es fi he id it lt ku pl pt sk diff -Nru parlatype-1.5.4/help/Makefile.in parlatype-1.5.6/help/Makefile.in --- parlatype-1.5.4/help/Makefile.in 2017-11-19 15:49:26.000000000 +0000 +++ parlatype-1.5.6/help/Makefile.in 2018-08-17 10:45:10.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -14,7 +14,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -85,7 +95,6 @@ @LIBREOFFICE_TRUE@ libreoffice-helpers.page subdir = help -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ @@ -94,6 +103,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -118,6 +128,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -139,7 +150,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ @@ -190,6 +200,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -272,6 +283,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -291,7 +303,7 @@ keyboard-shortcuts.page legal.xml media-keys.page \ preferences.page selections.page timestamps.page \ $(am__append_2) -HELP_LINGUAS = de en_GB es he id it lt ku pt +HELP_LINGUAS = de en_GB es fi he id it lt ku pl pt sk all: all-am .SUFFIXES: @@ -307,7 +319,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign help/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign help/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -482,6 +493,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + @YELP_HELP_RULES@ # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Nru parlatype-1.5.4/help/pl/drag-and-drop.page parlatype-1.5.6/help/pl/drag-and-drop.page --- parlatype-1.5.4/help/pl/drag-and-drop.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/drag-and-drop.page 2018-08-17 10:46:17.000000000 +0000 @@ -0,0 +1,23 @@ + + + + + Przeciąganie plików, nazw plików i czasów na program Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Przeciąganie + +

Można przeciągać pliki, nazwy plików i czasy na okno programu Parlatype.

+ + +

Pliki: przeciągnij plik z menedżera plików, np. Pliki, na okno programu Parlatype, a otworzy on ten plik.

 +

Nazwy plików: zaznacz nazwę pliku w edytorze tekstu, np. LibreOffice, przeciągnij zaznaczony tekst do programu Parlatype, a otworzy on ten plik. Działa to zawsze, jeśli zaznaczenie zawiera pełną ścieżkę. Jeśli zaznaczona zostanie tylko nazwa, Parlatype wyszuka pełną ścieżkę na liście ostatnio używanych plików i otworzy ją, jeśli ją na niej znajdzie.

 +

Czasy: można przeciągać czasy w obu kierunkach. Zaznacz czas w edytorze tekstu, np. LibreOffice, przeciągnij zaznaczony tekst do programu Parlatype, a przejdzie on do tego miejsca. Można także kliknąć etykietę czasu programu Parlatype i przeciągnąć ją do edytora tekstu, aby wstawić go do niego.

 + + + diff -Nru parlatype-1.5.4/help/pl/first-steps.page parlatype-1.5.6/help/pl/first-steps.page --- parlatype-1.5.4/help/pl/first-steps.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/first-steps.page 2018-08-17 10:46:17.000000000 +0000 @@ -0,0 +1,34 @@ + + + + + Pierwsze kroki z programem Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Pierwsze kroki z programem Parlatype + +

Parlatype to łatwy w użyciu odtwarzacz dźwięku pomagający w transkrypcji lub dodawaniu przypisów do nagranej mowy. Należy także uruchomić edytor tekstu, np. LibreOffice. Uruchom Parlatype i odtwórz plik dźwiękowy klikając przycisk Otwórz w górnym lewym rogu.

+ + +

Można także przeciągnąć plik na program Parlatype lub otworzyć ostatnio używane pliki w menu programu.

+ + +

W górnym lewym rogu widoczny jest teraz przycisk Odtwórz, który przełącza między odtwarzaniem a wstrzymaniem. Po wstrzymaniu Parlatype przewija kilka sekund, aby ułatwić wznowienie. Można to zmienić w oknie .

+ + + +

Przyciski Przejdź wstecz i Przejdź naprzód w dolnym lewym rogu przewijają o kilka sekund do tyłu lub do przodu. Przewijany czas można zmienić w oknie .

+ +

Widok przewija się automatycznie, aby kursor był zawsze widoczny. Można przewinąć ręcznie klikając lub przeciągając pasek przewijania lub za pomocą standardowych skrótów klawiszowych. Automatyczne przewijanie zostaje wtedy zatrzymane.

+ +

Aby wrócić do pozycji kursora i ponownie włączyć automatyczne przewijanie, kliknij przycisk Przejdź do obok etykiety czasu. Kliknięcie przycisku Odtwórz także włącza automatyczne przewijanie.

+ +

Kliknięcie w widoku prawym przyciskiem myszy umieści kursor w danym miejscu, a także przytrzymanie prawego przycisku myszy i poruszanie się. Funkcją lewego przycisku myszy jest .

+ +

Podziałka prędkości obok głośności w dolnym prawym rogu umożliwia dostosowanie prędkości odtwarzania. Wartość „1” oznacza zwykłą prędkość, wszystko poniżej (do 0,5) jest wolniejsze, a wszystko powyżej jest szybsze.

+ diff -Nru parlatype-1.5.4/help/pl/index.page parlatype-1.5.6/help/pl/index.page --- parlatype-1.5.4/help/pl/index.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/index.page 2018-08-17 10:46:17.000000000 +0000 @@ -0,0 +1,25 @@ + + + + +Parlatype +Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + +Parlatype to łatwy w obsłudze odtwarzacz multimedialny. Jego głównym celem jest pomoc przy transkrypcji mowy. + + + +<media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> Parlatype + +

Parlatype to łatwy w obsłudze odtwarzacz multimedialny. Jego głównym celem jest pomoc przy transkrypcji mowy.

+

zawiera krótki przegląd programu. Pozostałe tematy są opisane poniżej.

+ +
+ Tematy pomocy +
+ + diff -Nru parlatype-1.5.4/help/pl/keyboard-shortcuts.page parlatype-1.5.6/help/pl/keyboard-shortcuts.page --- parlatype-1.5.4/help/pl/keyboard-shortcuts.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/keyboard-shortcuts.page 2018-08-17 10:46:17.000000000 +0000 @@ -0,0 +1,77 @@ + + + + + Standardowe skróty klawiszowe w programie Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Skróty klawiszowe + +

Skróty klawiszowe do sterowania programem Parlatype, takie jak Odtwórz, są opisane w sekcji . Klawisze skrótów dla okna są wymienione poniżej.

+ + + Standardowe skróty klawiszowe + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

Aby to zrobić

Naciśnij to

Wyświetlenie pomocy

F1

Otwarcie pliku

CtrlO

Otwarcie ostatnio używanych plików

CtrlR

Odtworzenie/wstrzymanie

CtrlSpacja

Przejście do…

CtrlG

Przejście wstecz

CtrlW lewo

Przejście naprzód

CtrlW prawo

Skopiowanie czasu

CtrlC

Wstawienie czasu

CtrlV

Powiększenie

Ctrl+

Pomniejszenie

Ctrl-

Zakończenie działania

CtrlQ

+ + diff -Nru parlatype-1.5.4/help/pl/legal.xml parlatype-1.5.6/help/pl/legal.xml --- parlatype-1.5.4/help/pl/legal.xml 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/legal.xml 2018-08-17 10:46:17.000000000 +0000 @@ -0,0 +1,6 @@ + + + +

Na warunkach licencji Creative Commons Attribution-Share Alike 4.0 International.

+ + diff -Nru parlatype-1.5.4/help/pl/libreoffice-helpers.page parlatype-1.5.6/help/pl/libreoffice-helpers.page --- parlatype-1.5.4/help/pl/libreoffice-helpers.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/libreoffice-helpers.page 2018-08-17 10:46:18.000000000 +0000 @@ -0,0 +1,71 @@ + + + + + Używanie programu Parlatype za pomocą pakietu LibreOffice + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Narzędzia pomocnicze LibreOffice + +

Narzędzia pomocnicze LibreOffice umożliwiają sterowanie programem Parlatype z pakietu LibreOffice. Na przykład można łatwo przechodzić do czasów.

+ +

Aby ich używać, należy przydzielić skróty klawiszowe w pakiecie LibreOffice. Aby to zrobić, otwórz LibreOffice, przejdź do menu Narzędzia i wybierz Dostosuj.

+ + + +

Przejdź do karty Klawiatura. W dolnej części, Funkcje, znajduje się lista o nazwie Kategoria. Na końcu tej listy znajduje się napis Makra LibreOffice. Dostępna jest podkategoria udostępnianie, która ma podkategorię Parlatype. Po zaznaczeniu Parlatype dostępna będzie lista funkcji na liście Funkcje. Zaznacz funkcje, których chcesz używać, wybierz z listy Klawisze skrótów nad skrótem i kliknij przycisk Modyfikuj.

+ + + +

Można wybrać dowolne z tych funkcji:

+ + + Narzędzia pomocnicze LibreOffice + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

Nazwa narzędzia pomocniczego

Co robi

PlayPause

Przełącza między odtwarzaniem a wstrzymaniem. W zależności od preferencji ustawionych w programie Parlatype przewinie o kilka sekund po wstrzymaniu.

JumpBack

Przechodzi do tyłu o kilka sekund, w zależności od preferencji ustawionych w programie Parlatype.

JumpForward

Przechodzi do przodu o kilka sekund, w zależności od preferencji ustawionych w programie Parlatype.

InsertTimestamp

Wstawia obecny czas w pozycji kursora. Nie zastępuje żadnego zaznaczenia.

InsertTimestampOnNewLine

Jak wyżej, ale w nowym wierszu.

GotoTimestamp

Jeśli kursor jest ustawiony na czasie, to przejdzie do tego miejsca. Kursor musi być między dwoma znakami #. Nie zaznaczaj czasu, tylko umieść w nim kursor.

IncreaseSpeed

Zwiększa prędkość odtwarzania.

DecreaseSpeed

Zmniejsza prędkość odtwarzania.

+ + diff -Nru parlatype-1.5.4/help/pl/media-keys.page parlatype-1.5.6/help/pl/media-keys.page --- parlatype-1.5.4/help/pl/media-keys.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/media-keys.page 2018-08-17 10:46:17.000000000 +0000 @@ -0,0 +1,36 @@ + + + + + Jak sterować programem Parlatype za pomocą klawiszy multimedialnych + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Klawisze multimedialne + +

Podstawowe funkcje programu Parlatype mogą być sterowane za pomocą tak zwanych klawiszy multimedialnych. Klawisze multimedialne są używane do sterowania odtwarzaczami multimediów i działają także, kiedy odtwarzacz nie jest aktywny lub w tle.

+ +

Można zmienić klawisze multimedialne w ustawieniach GNOME. Można używać specjalnych klawiszy na klawiaturach multimedialnych lub dowolnego innego klawisza lub kombinacji klawiszy.

+ + +

Wpływa to także na inne odtwarzacze multimedialne, np. Totem i Rhythmbox.

+ + +

Parlatype nasłuchuje tych klawiszy:

+ +

Odtwórz, Wstrzymaj, Zatrzymaj: każdy z tych klawiszy przełącza między odtwarzaniem a wstrzymaniem.

 +

Przewiń do tyłu, Poprzedni: każdy z tych klawiszy przewinie w tył o czas wybrany w preferencjach.

 +

Przewiń do przodu, Następny: każdy z tych klawiszy przewinie do przodu o czas wybrany w preferencjach.

 + + + +

Oficjalna dokumentacja zawiera szczegółowe instrukcje zmiany skrótów klawiszowych w środowisku GNOME.

+ + +

Jeśli używany jest specjalny pedał, to można przypisać go do dowolnego z klawiszy. Nie zostało to dobrze przetestowane. Opinie na temat obsługi pedału są mile widziane.

+ + diff -Nru parlatype-1.5.4/help/pl/pl.po parlatype-1.5.6/help/pl/pl.po --- parlatype-1.5.4/help/pl/pl.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/pl.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,959 @@ +# Polish translation for parlatype +# Copyright (c) 2018 Rosetta Contributors and Canonical Ltd 2018 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2018. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: FULL NAME \n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" +"PO-Revision-Date: 2018-03-29 02:47+0000\n" +"Last-Translator: Piotr Drąg \n" +"Language-Team: Polish \n" +"Language: pl\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Launchpad-Export-Date: 2018-04-05 18:16+0000\n" +"X-Generator: Launchpad (build 18599)\n" + +#. Put one translator per line, in the form NAME , YEAR1, YEAR2 +msgctxt "_" +msgid "translator-credits" +msgstr "" +"Launchpad Contributions:\n" +" Piotr Drąg https://launchpad.net/~piotrdrag\n" +" tydell https://launchpad.net/~marcin-tydelski" + +#. (itstool) path: info/title +#: C/index.page:7 +msgctxt "text" +msgid "Parlatype" +msgstr "Parlatype" + +#. (itstool) path: info/title +#: C/index.page:8 +msgctxt "link" +msgid "Parlatype" +msgstr "Parlatype" + +#. (itstool) path: credit/name +#: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 +msgid "Gabor Karsay" +msgstr "Gabor Karsay" + +#. (itstool) path: info/desc +#. (itstool) path: page/p +#: C/index.page:14 C/index.page:23 +msgid "" +"Parlatype is an easy to use media player. Its main purpose is to " +"help you transcribing speech." +msgstr "" +"Parlatype to łatwy w obsłudze odtwarzacz multimedialny. Jego " +"głównym celem jest pomoc przy transkrypcji mowy." + +#. (itstool) path: page/title +#: C/index.page:18 +msgid "<_:media-1/> Parlatype" +msgstr "<_:media-1/> Parlatype" + +#. (itstool) path: page/p +#: C/index.page:24 +msgid "" +"For a quick overview have a look at . Other " +"topics are covered below." +msgstr "" +" zawiera krótki przegląd programu. Pozostałe " +"tematy są opisane poniżej." + +#. (itstool) path: section/title +#: C/index.page:27 +msgid "Help topics" +msgstr "Tematy pomocy" + +#. (itstool) path: info/desc +#: C/drag-and-drop.page:6 +msgid "Drop files, file names or timestamps on Parlatype" +msgstr "Przeciąganie plików, nazw plików i czasów na program Parlatype" + +#. (itstool) path: page/title +#: C/drag-and-drop.page:14 +msgid "Drag and Drop" +msgstr "Przeciąganie" + +#. (itstool) path: page/p +#: C/drag-and-drop.page:16 +msgid "" +"You can drop files, file names or timestamps on Parlatype's " +"window." +msgstr "" +"Można przeciągać pliki, nazwy plików i czasy na okno programu " +"Parlatype." + +#. (itstool) path: item/p +#: C/drag-and-drop.page:19 +msgid "" +"Files: Drag and drop a file from a file manager, e.g. Files, on " +"Parlatype and it will open that file." +msgstr "" +"Pliki: przeciągnij plik z menedżera plików, np. Pliki, na okno " +"programu Parlatype, a otworzy on ten plik." + +#. (itstool) path: item/p +#: C/drag-and-drop.page:20 +msgid "" +"File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " +"file. This will always work if the selection contains a full path. If you " +"select the name only, Parlatype will look up its full path in the " +"list of recent files and open it if it can find it in that list." +msgstr "" +"Nazwy plików: zaznacz nazwę pliku w edytorze tekstu, np. LibreOffice, przeciągnij zaznaczony tekst do programu Parlatype, " +"a otworzy on ten plik. Działa to zawsze, jeśli zaznaczenie zawiera pełną " +"ścieżkę. Jeśli zaznaczona zostanie tylko nazwa, Parlatype wyszuka " +"pełną ścieżkę na liście ostatnio używanych plików i otworzy ją, jeśli ją na " +"niej znajdzie." + +#. (itstool) path: item/p +#: C/drag-and-drop.page:21 +msgid "" +"Timestamps: You can drag and drop timestamps in both directions. Select a " +"timestamp from a word processor, e.g. LibreOffice, drop the " +"selected text on Parlatype and it will jump to that position. Or " +"you click on Parlatype's time label and drag it to a word " +"processor to insert it there." +msgstr "" +"Czasy: można przeciągać czasy w obu kierunkach. Zaznacz czas w edytorze " +"tekstu, np. LibreOffice, przeciągnij zaznaczony tekst do programu " +"Parlatype, a przejdzie on do tego miejsca. Można także kliknąć " +"etykietę czasu programu Parlatype i przeciągnąć ją do edytora " +"tekstu, aby wstawić go do niego." + +#. (itstool) path: info/desc +#. (itstool) path: page/title +#: C/first-steps.page:6 C/first-steps.page:14 +msgid "First steps with Parlatype" +msgstr "Pierwsze kroki z programem Parlatype" + +#. (itstool) path: page/p +#: C/first-steps.page:16 +msgid "" +"Parlatype is an easy to use audio player to help you transcribing " +"or annotating recorded speech. You need to run a word processor, e.g. " +"LibreOffice, too. Launch Parlatype and open an audio " +"file by clicking on the Open button in the upper left corner." +msgstr "" +"Parlatype to łatwy w użyciu odtwarzacz dźwięku pomagający " +"w transkrypcji lub dodawaniu przypisów do nagranej mowy. Należy także " +"uruchomić edytor tekstu, np. LibreOffice. Uruchom Parlatype i odtwórz plik dźwiękowy klikając przycisk Otwórz w górnym " +"lewym rogu." + +#. (itstool) path: note/p +#: C/first-steps.page:19 +msgid "" +"You can also drag and drop a file on Parlatype or open the " +"recently used files in the Application menu." +msgstr "" +"Można także przeciągnąć plik na program Parlatype lub otworzyć " +"ostatnio używane pliki w menu programu." + +#. (itstool) path: page/p +#: C/first-steps.page:22 +msgid "" +"Now in the upper left corner there is a Play button which toggles " +"between play and pause. Whenever you pause, Parlatype rewinds a " +"few seconds to make it easier to resume. This can be changed in the ." +msgstr "" +"W górnym lewym rogu widoczny jest teraz przycisk Odtwórz, który " +"przełącza między odtwarzaniem a wstrzymaniem. Po wstrzymaniu Parlatype przewija kilka sekund, aby ułatwić wznowienie. Można to zmienić w oknie " +"." + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/first-steps.page:24 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-main-window.png' " +"md5='c57ce9c636f96646e8ba668d290fb352'" +msgstr "" +"external ref='figures/parlatype-main-window.png' " +"md5='c57ce9c636f96646e8ba668d290fb352'" + +#. (itstool) path: page/p +#: C/first-steps.page:26 +msgid "" +"The buttons Jump back and Jump forward in the lower " +"left corner skip a few seconds back or ahead. The amount of time can be " +"changed in the ." +msgstr "" +"Przyciski Przejdź wstecz i Przejdź naprzód w dolnym " +"lewym rogu przewijają o kilka sekund do tyłu lub do przodu. Przewijany czas " +"można zmienić w oknie ." + +#. (itstool) path: page/p +#: C/first-steps.page:28 +msgid "" +"The view scrolls automatically so that the cursor is always visible. You can " +"scroll manually by clicking on or dragging the scroll bar or using the " +"standard keybindings. Automatic scrolling is stopped then." +msgstr "" +"Widok przewija się automatycznie, aby kursor był zawsze widoczny. Można " +"przewinąć ręcznie klikając lub przeciągając pasek przewijania lub za pomocą " +"standardowych skrótów klawiszowych. Automatyczne przewijanie zostaje wtedy " +"zatrzymane." + +#. (itstool) path: page/p +#: C/first-steps.page:30 +msgid "" +"To get back to the cursor's position and let the view scroll automatically " +"again, click on the Go to button next to the time label. Clicking " +"on the Play button also turns automatic scrolling on." +msgstr "" +"Aby wrócić do pozycji kursora i ponownie włączyć automatyczne przewijanie, " +"kliknij przycisk Przejdź do obok etykiety czasu. Kliknięcie " +"przycisku Odtwórz także włącza automatyczne przewijanie." + +#. (itstool) path: page/p +#: C/first-steps.page:32 +msgid "" +"Clicking in the view with the right mouse button will put the cursor there, " +"also holding the right mouse button pressed and moving it. The left mouse " +"button is for ." +msgstr "" +"Kliknięcie w widoku prawym przyciskiem myszy umieści kursor w danym miejscu, " +"a także przytrzymanie prawego przycisku myszy i poruszanie się. Funkcją " +"lewego przycisku myszy jest ." + +#. (itstool) path: page/p +#: C/first-steps.page:34 +msgid "" +"The speed scale next to the volume button in the lower " +"right corner lets you adjust the speed of playback. A value of 1 means " +"normal speed, everything lower (down to 0.5) is slower, everything above is " +"faster." +msgstr "" +"Podziałka prędkości obok głośności w dolnym prawym " +"rogu umożliwia dostosowanie prędkości odtwarzania. Wartość „1” oznacza " +"zwykłą prędkość, wszystko poniżej (do 0,5) jest wolniejsze, a wszystko " +"powyżej jest szybsze." + +#. (itstool) path: info/desc +#: C/keyboard-shortcuts.page:6 +msgid "Standard keyboard shortcuts in Parlatype" +msgstr "Standardowe skróty klawiszowe w programie Parlatype" + +#. (itstool) path: page/title +#: C/keyboard-shortcuts.page:14 +msgid "Keyboard shortcuts" +msgstr "Skróty klawiszowe" + +#. (itstool) path: page/p +#: C/keyboard-shortcuts.page:16 +msgid "" +"Keyboard shortcuts for Parlatype control, like Play, " +"are described in . Shortcut keys for the window are " +"listed below." +msgstr "" +"Skróty klawiszowe do sterowania programem Parlatype, takie jak " +"Odtwórz, są opisane w sekcji . Klawisze " +"skrótów dla okna są wymienione poniżej." + +#. (itstool) path: table/title +#: C/keyboard-shortcuts.page:19 +msgid "Standard Shortcut keys" +msgstr "Standardowe skróty klawiszowe" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:22 +msgid "To Do This" +msgstr "Aby to zrobić" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:23 +msgid "Press This" +msgstr "Naciśnij to" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:28 +msgid "Show help" +msgstr "Wyświetlenie pomocy" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:29 +msgid "F1" +msgstr "F1" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:32 +msgid "Open file" +msgstr "Otwarcie pliku" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:33 +msgid "Ctrlo" +msgstr "CtrlO" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:36 +msgid "Open recent files" +msgstr "Otwarcie ostatnio używanych plików" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:37 +msgid "Ctrlr" +msgstr "CtrlR" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:40 +msgid "Play/Pause" +msgstr "Odtworzenie/wstrzymanie" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:41 +msgid "CtrlSpace" +msgstr "CtrlSpacja" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:44 +msgid "Go to …" +msgstr "Przejście do…" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:45 +msgid "Ctrlg" +msgstr "CtrlG" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:48 +msgid "Jump back" +msgstr "Przejście wstecz" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:49 +msgid "CtrlLeft" +msgstr "CtrlW lewo" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:52 +msgid "Jump forward" +msgstr "Przejście naprzód" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:53 +msgid "CtrlRight" +msgstr "CtrlW prawo" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 +msgid "Copy timestamp" +msgstr "Skopiowanie czasu" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:57 +msgid "Ctrlc" +msgstr "CtrlC" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:60 +msgid "Insert timestamp" +msgstr "Wstawienie czasu" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:61 +msgid "Ctrlv" +msgstr "CtrlV" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:64 +msgid "Zoom in" +msgstr "Powiększenie" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:65 +msgid "Ctrl+" +msgstr "Ctrl+" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:68 +msgid "Zoom out" +msgstr "Pomniejszenie" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:69 +msgid "Ctrl-" +msgstr "Ctrl-" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:72 +msgid "Quit" +msgstr "Zakończenie działania" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:73 +msgid "Ctrlq" +msgstr "CtrlQ" + +#. (itstool) path: p/link +#: C/legal.xml:5 +msgid "Creative Commons Attribution-ShareAlike 4.0 International" +msgstr "Creative Commons Attribution-Share Alike 4.0 International" + +#. (itstool) path: license/p +#: C/legal.xml:4 +msgid "This work is licensed under a <_:link-1/> license." +msgstr "Na warunkach licencji <_:link-1/>." + +#. (itstool) path: info/desc +#: C/media-keys.page:6 +msgid "How to control Parlatype with media keys" +msgstr "Jak sterować programem Parlatype za pomocą klawiszy multimedialnych" + +#. (itstool) path: page/title +#: C/media-keys.page:14 +msgid "Media keys" +msgstr "Klawisze multimedialne" + +#. (itstool) path: page/p +#: C/media-keys.page:16 +msgid "" +"Parlatype's basic functions can be controlled with so called " +"media keys. Media keys are used system wide to control media " +"players and they are working even if the media player is not in focus or in " +"the background." +msgstr "" +"Podstawowe funkcje programu Parlatype mogą być sterowane za " +"pomocą tak zwanych klawiszy multimedialnych. Klawisze multimedialne " +"są używane do sterowania odtwarzaczami multimediów i działają także, kiedy " +"odtwarzacz nie jest aktywny lub w tle." + +#. (itstool) path: page/p +#: C/media-keys.page:18 +msgid "" +"You can change the media keys in GNOME settings. You can use dedicated keys " +"from a multimedia keyboard or use any other key or combination of keys." +msgstr "" +"Można zmienić klawisze multimedialne w ustawieniach GNOME. Można używać " +"specjalnych klawiszy na klawiaturach multimedialnych lub dowolnego innego " +"klawisza lub kombinacji klawiszy." + +#. (itstool) path: note/p +#: C/media-keys.page:21 +msgid "" +"This will affect other media players, e.g. Totem or " +"Rhythmbox, as well." +msgstr "" +"Wpływa to także na inne odtwarzacze multimedialne, np. Totem " +"i Rhythmbox." + +#. (itstool) path: page/p +#: C/media-keys.page:24 +msgid "Parlatype listens to these key strokes:" +msgstr "Parlatype nasłuchuje tych klawiszy:" + +#. (itstool) path: item/p +#: C/media-keys.page:26 +msgid "" +"Play, Pause, Stop: Each of these keys " +"toggles between playing and pause." +msgstr "" +"Odtwórz, Wstrzymaj, Zatrzymaj: każdy z tych " +"klawiszy przełącza między odtwarzaniem a wstrzymaniem." + +#. (itstool) path: item/p +#: C/media-keys.page:27 +msgid "" +"Rewind, Previous: Each of these keys will jump back " +"the time you selected in Preferences." +msgstr "" +"Przewiń do tyłu, Poprzedni: każdy z tych klawiszy " +"przewinie w tył o czas wybrany w preferencjach." + +#. (itstool) path: item/p +#: C/media-keys.page:28 +msgid "" +"Fast Forward, Next: Each of these keys will jump ahead " +"the time you selected in Preferences." +msgstr "" +"Przewiń do przodu, Następny: każdy z tych klawiszy " +"przewinie do przodu o czas wybrany w preferencjach." + +#. (itstool) path: note/p +#: C/media-keys.page:32 +msgid "" +"For detailed instructions how to change keyboard shortcuts in GNOME see the " +"official " +"documentation." +msgstr "" +"Oficjalna " +"dokumentacja zawiera szczegółowe instrukcje zmiany skrótów " +"klawiszowych w środowisku GNOME." + +#. (itstool) path: page/p +#: C/media-keys.page:35 +msgid "" +"If you are using a dedicated foot pedal, it should be possible to map the " +"foot pedal signals to any of the keys. This is not well tested, however. Any " +"feedback regarding foot pedals is welcome." +msgstr "" +"Jeśli używany jest specjalny pedał, to można przypisać go do dowolnego " +"z klawiszy. Nie zostało to dobrze przetestowane. Opinie na temat obsługi " +"pedału są mile widziane." + +#. (itstool) path: info/desc +#: C/preferences.page:6 +msgid "How to customize Parlatype" +msgstr "Jak dostosować program Parlatype" + +#. (itstool) path: page/title +#: C/preferences.page:14 +msgid "Preferences" +msgstr "Preferencje" + +#. (itstool) path: page/p +#: C/preferences.page:16 +msgid "" +"You can reach the preferences window in the Application Menu (next to " +"Activities in the top left corner. There are three tabs: " +"Waveform, Controls and Window." +msgstr "" +"Można otworzyć okno preferencji w menu programu (obok napisu Podgląd w górnym lewym rogu). Okno ma trzy karty: Przebieg fali, " +"Sterowanie i Okno." + +#. (itstool) path: section/title +#: C/preferences.page:19 +msgid "Waveform" +msgstr "Przebieg fali" + +#. (itstool) path: section/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/preferences.page:21 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-prefs-waveform.png' " +"md5='e9d05960162dcdddab10378e21ce63da'" +msgstr "" +"external ref='figures/parlatype-prefs-waveform.png' " +"md5='e9d05960162dcdddab10378e21ce63da'" + +#. (itstool) path: item/p +#: C/preferences.page:24 +msgid "" +"Resolution: The resolution of the waveform image is given in pixels per " +"second, e.g. the default resolution of 100 means, that one second is shown " +"with a width of 100 pixels." +msgstr "" +"Rozdzielczość: rozdzielczość obrazu przebiegu fali jest podawana " +"w pikselach. Domyślna rozdzielczość „100” oznacza, że jedna sekunda jest " +"wyświetlana za pomocą 100 pikseli szerokości." + +#. (itstool) path: item/p +#: C/preferences.page:25 +msgid "" +"Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " +"slower systems a moving cursor might be smoother." +msgstr "" +"Stały i poruszający się kursor: podążanie za kursorem ma dwa tryby. Na " +"wolniejszych komputerach poruszający się kursor może być płynniejszy." + +#. (itstool) path: item/p +#: C/preferences.page:26 +msgid "Show time scale: Turn the time scale on or off." +msgstr "Podziałka czasu: włączanie i wyłączanie podziałki czasu." + +#. (itstool) path: section/title +#: C/preferences.page:31 +msgid "Controls" +msgstr "Sterowanie" + +#. (itstool) path: section/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/preferences.page:33 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-prefs-controls.png' " +"md5='0b50614222d881110b176c2e28b7d18c'" +msgstr "" +"external ref='figures/parlatype-prefs-controls.png' " +"md5='0b50614222d881110b176c2e28b7d18c'" + +#. (itstool) path: item/p +#: C/preferences.page:36 +msgid "" +"Jump back on pause: Parlatype will rewind a few seconds on each " +"pause, this way you can easier resume typing. Set this value to 0 if you " +"don't want this behaviour." +msgstr "" +"Przejście wstecz przy wstrzymaniu: Parlatype przewinie o kilka " +"sekund przy każdym wstrzymaniu, dzięki czemu można łatwiej wznowić pisanie. " +"Ustaw na wartość „0”, aby to wyłączyć." + +#. (itstool) path: item/p +#: C/preferences.page:37 +msgid "" +"Jump back: Configures how many seconds to skip when the Jump back " +"button is pressed." +msgstr "" +"Przejście wstecz: konfiguruje liczbę sekund przewijanych po naciśnięciu " +"przycisku Przejdź wstecz." + +#. (itstool) path: item/p +#: C/preferences.page:38 +msgid "" +"Jump forward: Configures how many seconds to skip when the Jump " +"forward button is pressed." +msgstr "" +"Przejście naprzód: konfiguruje liczbę sekund przewijanych po naciśnięciu " +"przycisku Przejdź naprzód." + +#. (itstool) path: section/title +#: C/preferences.page:43 +msgid "Window" +msgstr "Okno" + +#. (itstool) path: section/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/preferences.page:45 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-prefs-window.png' " +"md5='6affc475c74223fa48e7de25393fe7de'" +msgstr "" +"external ref='figures/parlatype-prefs-window.png' " +"md5='6affc475c74223fa48e7de25393fe7de'" + +#. (itstool) path: item/p +#: C/preferences.page:48 +msgid "" +"Remember size: On start-up Parlatype sets the window size to the " +"size it had the last time." +msgstr "" +"Pamiętanie rozmiaru: po uruchomieniu Parlatype ustawia rozmiar " +"okna na rozmiar używany poprzednim razem." + +#. (itstool) path: item/p +#: C/preferences.page:49 +msgid "" +"Remember position: On start-up Parlatype can position its window " +"where you had it when you closed Parlatype last time." +msgstr "" +"Pamiętanie pozycji: po uruchomieniu Parlatype może umieścić swoje " +"okno w miejscu, w którym było ostatnim razem." + +#. (itstool) path: item/p +#: C/preferences.page:50 +msgid "" +"Start on top: This will put Parlatype on start-up on top of other " +"windows. This might be useful if you are working with a maximized word " +"processor and still want to see the Parlatype window." +msgstr "" +"Uruchamianie zawsze na wierzchu: spowoduje umieszczanie programu " +"Parlatype nad pozostałymi oknami po uruchomieniu. Może to być " +"przydatne w czasie pracy ze zmaksymalizowanym oknem edytora tekstu, aby " +"widzieć okno Parlatype." + +#. (itstool) path: note/p +#: C/preferences.page:54 +msgid "" +"Remember position and Start on top are not available " +"on Wayland." +msgstr "" +"Pamiętanie pozycji i Uruchamianie zawsze na wierzchu " +"nie są dostępne podczas działania w technologii Wayland." + +#. (itstool) path: info/desc +#: C/selections.page:6 +msgid "How to play and repeat a selection" +msgstr "Jak odtwarzać i powtarzać zaznaczenie" + +#. (itstool) path: page/title +#: C/selections.page:14 +msgid "Selections" +msgstr "Zaznaczanie" + +#. (itstool) path: page/p +#: C/selections.page:16 +msgid "" +"You can select a piece of the waveform with the mouse. Next time you press " +"Play, it will play the selection only. When it is finished and " +"you press Play again, it will loop the selection once." +msgstr "" +"Można zaznaczyć fragment przebiegu fali za pomocą myszy. Następne kliknięcie " +"przycisku Odtwórz odtworzy tylko ten fragment. Po ukończeniu " +"odtwarzania następne kliknięcie przycisku Odtwórz spowoduje " +"powtórzenie zaznaczenia jeden raz." + +#. (itstool) path: note/p +#: C/selections.page:18 +msgid "" +"When in selection mode, you can not exit the selection anymore until you " +"deselect it." +msgstr "" +"W trybie zaznaczania nie można wyjść z zaznaczenia do jego odznaczenia." + +#. (itstool) path: page/p +#: C/selections.page:20 +msgid "" +"Selections can be made with the mouse (or pointer device) with a left click, " +"holding the mouse button and dragging the pointer. If you click with " +"Shift key pressed, an already existing selection will be enlarged " +"to that point." +msgstr "" +"Można zaznaczać za pomocą myszy (lub innego urządzenia wskazującego) lewym " +"przyciskiem, przytrzymując go i przeciągając kursor. Kliknięcie przy " +"przytrzymanym klawiszu Shift powiększa już istniejące zaznaczenie " +"do tego miejsca." + +#. (itstool) path: page/p +#: C/selections.page:22 +msgid "" +"To deselect click once with the left button into the waveform. If the " +"waveform has keyboard focus, you can press Escape." +msgstr "" +"Aby odznaczyć, kliknij raz przebieg fali lewym przyciskiem myszy. Jeśli " +"przebieg fali jest aktywny, to można nacisnąć klawisz Esc." + +#. (itstool) path: info/desc +#: C/timestamps.page:6 +msgid "Set and go to timestamps" +msgstr "Ustawianie i przechodzenie do czasów" + +#. (itstool) path: page/title +#: C/timestamps.page:14 +msgid "Timestamps" +msgstr "Czasy" + +#. (itstool) path: page/p +#: C/timestamps.page:16 +msgid "Timestamps help you to navigate in your transcription." +msgstr "Czasy pomagają nawigować w transkrypcji." + +#. (itstool) path: note/p +#: C/timestamps.page:19 +msgid "" +"Timestamps look like this: #03:45.2#. You can select them with or without " +"the number signs." +msgstr "" +"Czas wygląda w ten sposób: #03:45.2#. Można zaznaczać je z lub bez znaków #." + +#. (itstool) path: section/title +#: C/timestamps.page:23 +msgid "Drag and drop" +msgstr "Przeciąganie" + +#. (itstool) path: section/p +#: C/timestamps.page:25 +msgid "" +"If you select the timestamp in the word processor, you can drag and drop it " +"on the Parlatype window and it will go to that position. This is " +"also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." +msgstr "" +"Po zaznaczeniu czasu w edytorze tekstu można przeciągnąć go do okna " +"Parlatype, a program przejdzie do tego miejsca. Można to robić " +"także w drugą stronę: przeciągnij czas z programu Parlatype do " +"edytora tekstu, aby go tam wstawić." + +#. (itstool) path: section/title +#: C/timestamps.page:29 +msgid "Using the clipboard" +msgstr "Używanie schowka" + +#. (itstool) path: section/p +#: C/timestamps.page:31 +msgid "" +"First make sure, the Parlatype window has focus. With the key " +"sequence Ctrlc the current timestamp " +"is copied to the clipboard. Changing to the word processor you can insert " +"now the timestamp in your transcription." +msgstr "" +"Najpierw upewnij się, że okno Parlatype jest aktywne. Kombinacja " +"klawiszy CtrlC skopiuje obecny czas " +"do schowka. Po przejściu do edytora tekstu można teraz wstawić czas " +"w transkrypcji." + +#. (itstool) path: section/p +#: C/timestamps.page:32 +msgid "" +"To go to a timestamp position, copy the timestamp in the word processor to " +"the clipboard. Once you have changed focus to Parlatype press " +"Ctrlv." +msgstr "" +"Aby przejść do pozycji czasu, skopiuj czas w edytorze tekstu do schowka. Po " +"przejściu do programu Parlatype naciśnij klawisze " +"CtrlV." + +#. (itstool) path: info/desc +#: C/libreoffice-helpers.page:7 +msgid "Use Parlatype with LibreOffice" +msgstr "Używanie programu Parlatype za pomocą pakietu LibreOffice" + +#. (itstool) path: page/title +#. (itstool) path: table/title +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 +msgid "LibreOffice Helpers" +msgstr "Narzędzia pomocnicze LibreOffice" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:17 +msgid "" +"LibreOffice Helpers let you control Parlatype from " +"LibreOffice. For example, you can jump easily to timestamps." +msgstr "" +"Narzędzia pomocnicze LibreOffice umożliwiają sterowanie programem " +"Parlatype z pakietu LibreOffice. Na przykład można " +"łatwo przechodzić do czasów." + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:19 +msgid "" +"To use them, you have to assign keyboard shortcuts in LibreOffice " +"itself. To do this, open LibreOffice, go to menu Tools " +"and select Customize." +msgstr "" +"Aby ich używać, należy przydzielić skróty klawiszowe w pakiecie " +"LibreOffice. Aby to zrobić, otwórz LibreOffice, " +"przejdź do menu Narzędzia i wybierz Dostosuj." + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:21 +msgctxt "_" +msgid "" +"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" +msgstr "" +"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:23 +msgid "" +"Go to tab Keyboard. In the lower part, Functions, " +"there is a list called Category. At the end of that list you'll " +"find the entry LibreOffice Macros. There is a subcategory " +"share which has a subcategory Parlatype. After " +"selecting Parlatype there will be a list of functions in the " +"Functions list. Choose the function you'd like to use, select " +"from the list Shortcut keys above a shortcut and click on the " +"button Modify." +msgstr "" +"Przejdź do karty Klawiatura. W dolnej części, Funkcje, " +"znajduje się lista o nazwie Kategoria. Na końcu tej listy " +"znajduje się napis Makra LibreOffice. Dostępna jest podkategoria " +"udostępnianie, która ma podkategorię Parlatype. Po " +"zaznaczeniu Parlatype dostępna będzie lista funkcji na liście " +"Funkcje. Zaznacz funkcje, których chcesz używać, wybierz z listy " +"Klawisze skrótów nad skrótem i kliknij przycisk Modyfikuj." + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:25 +msgctxt "_" +msgid "" +"external ref='figures/lo-customize.png' " +"md5='081564921275129bee7bbd10220547e7'" +msgstr "" +"external ref='figures/lo-customize.png' " +"md5='081564921275129bee7bbd10220547e7'" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:27 +msgid "You can select any of these functions:" +msgstr "Można wybrać dowolne z tych funkcji:" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:33 +msgid "Helper's name" +msgstr "Nazwa narzędzia pomocniczego" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:34 +msgid "What it does" +msgstr "Co robi" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:40 +msgid "" +"Toggles between play and pause. Depending on your preferences set in " +"Parlatype it will rewind a few seconds on pause." +msgstr "" +"Przełącza między odtwarzaniem a wstrzymaniem. W zależności od preferencji " +"ustawionych w programie Parlatype przewinie o kilka sekund po " +"wstrzymaniu." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:44 +msgid "" +"Jumps back a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" +"Przechodzi do tyłu o kilka sekund, w zależności od preferencji ustawionych " +"w programie Parlatype." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:48 +msgid "" +"Jumps forward a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" +"Przechodzi do przodu o kilka sekund, w zależności od preferencji ustawionych " +"w programie Parlatype." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:52 +msgid "" +"Inserts the current timestamp at the cursor's position. It does not " +"overwrite any selection." +msgstr "" +"Wstawia obecny czas w pozycji kursora. Nie zastępuje żadnego zaznaczenia." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:56 +msgid "The same as above, but on a new line." +msgstr "Jak wyżej, ale w nowym wierszu." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:60 +msgid "" +"If the cursor is set on a timestamp, it will jump to that position. The " +"cursor has to be somewhere between the two number signs (#). Don't select " +"the timestamp, just put the cursor inside." +msgstr "" +"Jeśli kursor jest ustawiony na czasie, to przejdzie do tego miejsca. Kursor " +"musi być między dwoma znakami #. Nie zaznaczaj czasu, tylko umieść w nim " +"kursor." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:64 +msgid "Increases playback speed." +msgstr "Zwiększa prędkość odtwarzania." + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:68 +msgid "Decreases playback speed." +msgstr "Zmniejsza prędkość odtwarzania." diff -Nru parlatype-1.5.4/help/pl/preferences.page parlatype-1.5.6/help/pl/preferences.page --- parlatype-1.5.4/help/pl/preferences.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/preferences.page 2018-08-17 10:46:17.000000000 +0000 @@ -0,0 +1,58 @@ + + + + + Jak dostosować program Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Preferencje + +

Można otworzyć okno preferencji w menu programu (obok napisu Podgląd w górnym lewym rogu). Okno ma trzy karty: Przebieg fali, Sterowanie i Okno.

+ +
+Przebieg fali + + + + +

Rozdzielczość: rozdzielczość obrazu przebiegu fali jest podawana w pikselach. Domyślna rozdzielczość „100” oznacza, że jedna sekunda jest wyświetlana za pomocą 100 pikseli szerokości.

 +

Stały i poruszający się kursor: podążanie za kursorem ma dwa tryby. Na wolniejszych komputerach poruszający się kursor może być płynniejszy.

 +

Podziałka czasu: włączanie i wyłączanie podziałki czasu.

 + +
+ +
+Sterowanie + + + + +

Przejście wstecz przy wstrzymaniu: Parlatype przewinie o kilka sekund przy każdym wstrzymaniu, dzięki czemu można łatwiej wznowić pisanie. Ustaw na wartość „0”, aby to wyłączyć.

 +

Przejście wstecz: konfiguruje liczbę sekund przewijanych po naciśnięciu przycisku Przejdź wstecz.

 +

Przejście naprzód: konfiguruje liczbę sekund przewijanych po naciśnięciu przycisku Przejdź naprzód.

 + +
+ +
+Okno + + + + +

Pamiętanie rozmiaru: po uruchomieniu Parlatype ustawia rozmiar okna na rozmiar używany poprzednim razem.

 +

Pamiętanie pozycji: po uruchomieniu Parlatype może umieścić swoje okno w miejscu, w którym było ostatnim razem.

 +

Uruchamianie zawsze na wierzchu: spowoduje umieszczanie programu Parlatype nad pozostałymi oknami po uruchomieniu. Może to być przydatne w czasie pracy ze zmaksymalizowanym oknem edytora tekstu, aby widzieć okno Parlatype.

 + + + +

Pamiętanie pozycji i Uruchamianie zawsze na wierzchu nie są dostępne podczas działania w technologii Wayland.

+ + +
+ + diff -Nru parlatype-1.5.4/help/pl/selections.page parlatype-1.5.6/help/pl/selections.page --- parlatype-1.5.4/help/pl/selections.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/selections.page 2018-08-17 10:46:17.000000000 +0000 @@ -0,0 +1,23 @@ + + + + + Jak odtwarzać i powtarzać zaznaczenie + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Zaznaczanie + +

Można zaznaczyć fragment przebiegu fali za pomocą myszy. Następne kliknięcie przycisku Odtwórz odtworzy tylko ten fragment. Po ukończeniu odtwarzania następne kliknięcie przycisku Odtwórz spowoduje powtórzenie zaznaczenia jeden raz.

+ +

W trybie zaznaczania nie można wyjść z zaznaczenia do jego odznaczenia.

 + +

Można zaznaczać za pomocą myszy (lub innego urządzenia wskazującego) lewym przyciskiem, przytrzymując go i przeciągając kursor. Kliknięcie przy przytrzymanym klawiszu Shift powiększa już istniejące zaznaczenie do tego miejsca.

+ +

Aby odznaczyć, kliknij raz przebieg fali lewym przyciskiem myszy. Jeśli przebieg fali jest aktywny, to można nacisnąć klawisz Esc.

+ + diff -Nru parlatype-1.5.4/help/pl/timestamps.page parlatype-1.5.6/help/pl/timestamps.page --- parlatype-1.5.4/help/pl/timestamps.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/pl/timestamps.page 2018-08-17 10:46:18.000000000 +0000 @@ -0,0 +1,34 @@ + + + + + Ustawianie i przechodzenie do czasów + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Czasy + +

Czasy pomagają nawigować w transkrypcji.

+ + +

Czas wygląda w ten sposób: #03:45.2#. Można zaznaczać je z lub bez znaków #.

+ + +
+Przeciąganie + +

Po zaznaczeniu czasu w edytorze tekstu można przeciągnąć go do okna Parlatype, a program przejdzie do tego miejsca. Można to robić także w drugą stronę: przeciągnij czas z programu Parlatype do edytora tekstu, aby go tam wstawić.

+
+ +
+Używanie schowka + +

Najpierw upewnij się, że okno Parlatype jest aktywne. Kombinacja klawiszy CtrlC skopiuje obecny czas do schowka. Po przejściu do edytora tekstu można teraz wstawić czas w transkrypcji.

+

Aby przejść do pozycji czasu, skopiuj czas w edytorze tekstu do schowka. Po przejściu do programu Parlatype naciśnij klawisze CtrlV.

+
+ + diff -Nru parlatype-1.5.4/help/pt/keyboard-shortcuts.page parlatype-1.5.6/help/pt/keyboard-shortcuts.page --- parlatype-1.5.4/help/pt/keyboard-shortcuts.page 2017-11-18 21:22:34.000000000 +0000 +++ parlatype-1.5.6/help/pt/keyboard-shortcuts.page 2018-08-17 10:46:18.000000000 +0000 @@ -36,10 +36,22 @@

Ctrlr

+

Play/Pause

+

CtrlSpace

+ +

Ir para ...

Ctrlg

+

Jump back

+

CtrlLeft

+ + +

Jump forward

+

CtrlRight

+ +

Copiar timestamp

Ctrlc

diff -Nru parlatype-1.5.4/help/pt/pt.po parlatype-1.5.6/help/pt/pt.po --- parlatype-1.5.4/help/pt/pt.po 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/help/pt/pt.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-04-18 20:55+0200\n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" "PO-Revision-Date: 2017-06-27 15:25+0000\n" "Last-Translator: Bruno Barreto \n" "Language-Team: Portuguese \n" +"Language: pt\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -37,22 +38,15 @@ msgstr "" #. (itstool) path: credit/name -#: C/index.page:10 -#: C/drag-and-drop.page:8 -#: C/first-steps.page:8 -#: C/keyboard-shortcuts.page:8 -#: C/media-keys.page:8 -#: C/preferences.page:8 -#: C/selections.page:8 -#: C/timestamps.page:8 -#: C/libreoffice-helpers.page:9 +#: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "" #. (itstool) path: info/desc #. (itstool) path: page/p -#: C/index.page:14 -#: C/index.page:23 +#: C/index.page:14 C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." @@ -102,12 +96,11 @@ #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" -"File names: Select a file name from a word processor, e.g. " -"LibreOffice, drop the selected text on Parlatype and " -"it will open that file. This will always work if the selection contains a " -"full path. If you select the name only, Parlatype will look up " -"its full path in the list of recent files and open it if it can find it in " -"that list." +"File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " +"file. This will always work if the selection contains a full path. If you " +"select the name only, Parlatype will look up its full path in the " +"list of recent files and open it if it can find it in that list." msgstr "" #. (itstool) path: item/p @@ -122,8 +115,7 @@ #. (itstool) path: info/desc #. (itstool) path: page/title -#: C/first-steps.page:6 -#: C/first-steps.page:14 +#: C/first-steps.page:6 C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "" @@ -161,7 +153,7 @@ msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " -"md5='1e21a2ddc61fda06238b6b1537191cb3'" +"md5='c57ce9c636f96646e8ba668d290fb352'" msgstr "" #. (itstool) path: page/p @@ -270,61 +262,91 @@ #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 +msgid "Play/Pause" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:41 +msgid "CtrlSpace" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:44 msgid "Go to …" msgstr "Ir para ..." #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:41 +#: C/keyboard-shortcuts.page:45 msgid "Ctrlg" msgstr "" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:44 +#: C/keyboard-shortcuts.page:48 +msgid "Jump back" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:49 +msgid "CtrlLeft" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:52 +msgid "Jump forward" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:53 +msgid "CtrlRight" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 msgid "Copy timestamp" msgstr "Copiar timestamp" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:45 +#: C/keyboard-shortcuts.page:57 msgid "Ctrlc" msgstr "" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:48 +#: C/keyboard-shortcuts.page:60 msgid "Insert timestamp" msgstr "Inserir timestamp" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:49 +#: C/keyboard-shortcuts.page:61 msgid "Ctrlv" msgstr "" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:52 +#: C/keyboard-shortcuts.page:64 msgid "Zoom in" msgstr "Ampliar" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:53 +#: C/keyboard-shortcuts.page:65 msgid "Ctrl+" msgstr "" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:56 +#: C/keyboard-shortcuts.page:68 msgid "Zoom out" msgstr "Reduzir" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:57 +#: C/keyboard-shortcuts.page:69 msgid "Ctrl-" msgstr "" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:60 +#: C/keyboard-shortcuts.page:72 msgid "Quit" msgstr "Sair" #. (itstool) path: td/p -#: C/keyboard-shortcuts.page:61 +#: C/keyboard-shortcuts.page:73 msgid "Ctrlq" msgstr "" @@ -557,22 +579,29 @@ msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " -"md5='615d876529cdd45763e78a3ee01b7b3e'" +"md5='6affc475c74223fa48e7de25393fe7de'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" +"Remember size: On start-up Parlatype sets the window size to the " +"size it had the last time." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:49 +#, fuzzy +msgid "" "Remember position: On start-up Parlatype can position its window " -"where you had it when you closed Parlatype last time. This also " -"remembers the window's size." +"where you had it when you closed Parlatype last time." msgstr "" "Lembrar posição: Ao iniciar, o Parlatype pode posicionar a janela " "onde estava quando você o fechou da última vez. O tamanho da janela também " "será lembrado." #. (itstool) path: item/p -#: C/preferences.page:49 +#: C/preferences.page:50 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " @@ -583,6 +612,13 @@ "editor de texto maximizado e ainda gostaria de ver a janela do " "Parlatype." +#. (itstool) path: note/p +#: C/preferences.page:54 +msgid "" +"Remember position and Start on top are not available " +"on Wayland." +msgstr "" + #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" @@ -656,8 +692,8 @@ msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " -"also possible the other way round: Drag the time label from " -"Parlatype to a word processor and drop it there to insert it." +"also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." msgstr "" #. (itstool) path: section/title @@ -689,8 +725,7 @@ #. (itstool) path: page/title #. (itstool) path: table/title -#: C/libreoffice-helpers.page:15 -#: C/libreoffice-helpers.page:30 +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "" diff -Nru parlatype-1.5.4/help/sk/drag-and-drop.page parlatype-1.5.6/help/sk/drag-and-drop.page --- parlatype-1.5.4/help/sk/drag-and-drop.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/drag-and-drop.page 2018-08-17 10:46:18.000000000 +0000 @@ -0,0 +1,23 @@ + + + + + Drop files, file names or timestamps on Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Drag and Drop + +

You can drop files, file names or timestamps on Parlatype's window.

+ + +

Files: Drag and drop a file from a file manager, e.g. Files, on Parlatype and it will open that file.

 +

File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that file. This will always work if the selection contains a full path. If you select the name only, Parlatype will look up its full path in the list of recent files and open it if it can find it in that list.

 +

Timestamps: You can drag and drop timestamps in both directions. Select a timestamp from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will jump to that position. Or you click on Parlatype's time label and drag it to a word processor to insert it there.

 + + + diff -Nru parlatype-1.5.4/help/sk/first-steps.page parlatype-1.5.6/help/sk/first-steps.page --- parlatype-1.5.4/help/sk/first-steps.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/first-steps.page 2018-08-17 10:46:18.000000000 +0000 @@ -0,0 +1,34 @@ + + + + + First steps with Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +First steps with Parlatype + +

Parlatype is an easy to use audio player to help you transcribing or annotating recorded speech. You need to run a word processor, e.g. LibreOffice, too. Launch Parlatype and open an audio file by clicking on the Open button in the upper left corner.

+ + +

You can also drag and drop a file on Parlatype or open the recently used files in the Application menu.

+ + +

Now in the upper left corner there is a Play button which toggles between play and pause. Whenever you pause, Parlatype rewinds a few seconds to make it easier to resume. This can be changed in the .

+ + + +

The buttons Jump back and Jump forward in the lower left corner skip a few seconds back or ahead. The amount of time can be changed in the .

+ +

The view scrolls automatically so that the cursor is always visible. You can scroll manually by clicking on or dragging the scroll bar or using the standard keybindings. Automatic scrolling is stopped then.

+ +

To get back to the cursor's position and let the view scroll automatically again, click on the Go to button next to the time label. Clicking on the Play button also turns automatic scrolling on.

+ +

Clicking in the view with the right mouse button will put the cursor there, also holding the right mouse button pressed and moving it. The left mouse button is for .

+ +

The speed scale next to the volume button in the lower right corner lets you adjust the speed of playback. A value of 1 means normal speed, everything lower (down to 0.5) is slower, everything above is faster.

+ diff -Nru parlatype-1.5.4/help/sk/index.page parlatype-1.5.6/help/sk/index.page --- parlatype-1.5.4/help/sk/index.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/index.page 2018-08-17 10:46:18.000000000 +0000 @@ -0,0 +1,28 @@ + + + + +Parlatype +Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + +Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech. + + + + + <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> + Parlatype + + +

Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech.

+

For a quick overview have a look at . Other topics are covered below.

+ +
+ Help topics +
+ + diff -Nru parlatype-1.5.4/help/sk/keyboard-shortcuts.page parlatype-1.5.6/help/sk/keyboard-shortcuts.page --- parlatype-1.5.4/help/sk/keyboard-shortcuts.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/keyboard-shortcuts.page 2018-08-17 10:46:18.000000000 +0000 @@ -0,0 +1,77 @@ + + + + + Standard keyboard shortcuts in Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Keyboard shortcuts + +

Keyboard shortcuts for Parlatype control, like Play, are described in . Shortcut keys for the window are listed below.

+ + + Standard Shortcut keys + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

To Do This

Press This

Show help

F1

Open file

Ctrlo

Open recent files

Ctrlr

Play/Pause

CtrlSpace

Go to …

Ctrlg

Jump back

CtrlLeft

Jump forward

CtrlRight

Copy timestamp

Ctrlc

Insert timestamp

Ctrlv

Zoom in

Ctrl+

Zoom out

Ctrl-

Quit

Ctrlq

+ + diff -Nru parlatype-1.5.4/help/sk/legal.xml parlatype-1.5.6/help/sk/legal.xml --- parlatype-1.5.4/help/sk/legal.xml 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/legal.xml 2018-08-17 10:46:18.000000000 +0000 @@ -0,0 +1,8 @@ + + + +

This work is licensed under a + Creative Commons + Attribution-ShareAlike 4.0 International license.

+ + diff -Nru parlatype-1.5.4/help/sk/libreoffice-helpers.page parlatype-1.5.6/help/sk/libreoffice-helpers.page --- parlatype-1.5.4/help/sk/libreoffice-helpers.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/libreoffice-helpers.page 2018-08-17 10:46:19.000000000 +0000 @@ -0,0 +1,71 @@ + + + + + Use Parlatype with LibreOffice + + Gabor Karsay + gabor.karsay@gmx.at + + + + +LibreOffice Helpers + +

LibreOffice Helpers let you control Parlatype from LibreOffice. For example, you can jump easily to timestamps.

+ +

To use them, you have to assign keyboard shortcuts in LibreOffice itself. To do this, open LibreOffice, go to menu Tools and select Customize.

+ + + +

Go to tab Keyboard. In the lower part, Functions, there is a list called Category. At the end of that list you'll find the entry LibreOffice Macros. There is a subcategory share which has a subcategory Parlatype. After selecting Parlatype there will be a list of functions in the Functions list. Choose the function you'd like to use, select from the list Shortcut keys above a shortcut and click on the button Modify.

+ + + +

You can select any of these functions:

+ + + LibreOffice Helpers + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

Helper's name

What it does

PlayPause

Toggles between play and pause. Depending on your preferences set in Parlatype it will rewind a few seconds on pause.

JumpBack

Jumps back a few seconds, depending on the preferences you set in Parlatype.

JumpForward

Jumps forward a few seconds, depending on the preferences you set in Parlatype.

InsertTimestamp

Inserts the current timestamp at the cursor's position. It does not overwrite any selection.

InsertTimestampOnNewLine

The same as above, but on a new line.

GotoTimestamp

If the cursor is set on a timestamp, it will jump to that position. The cursor has to be somewhere between the two number signs (#). Don't select the timestamp, just put the cursor inside.

IncreaseSpeed

Increases playback speed.

DecreaseSpeed

Decreases playback speed.

+ + diff -Nru parlatype-1.5.4/help/sk/media-keys.page parlatype-1.5.6/help/sk/media-keys.page --- parlatype-1.5.4/help/sk/media-keys.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/media-keys.page 2018-08-17 10:46:18.000000000 +0000 @@ -0,0 +1,36 @@ + + + + + How to control Parlatype with media keys + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Media keys + +

Parlatype's basic functions can be controlled with so called media keys. Media keys are used system wide to control media players and they are working even if the media player is not in focus or in the background.

+ +

You can change the media keys in GNOME settings. You can use dedicated keys from a multimedia keyboard or use any other key or combination of keys.

+ + +

This will affect other media players, e.g. Totem or Rhythmbox, as well.

+ + +

Parlatype listens to these key strokes:

+ +

Play, Pause, Stop: Each of these keys toggles between playing and pause.

 +

Rewind, Previous: Each of these keys will jump back the time you selected in Preferences.

 +

Fast Forward, Next: Each of these keys will jump ahead the time you selected in Preferences.

 + + + +

For detailed instructions how to change keyboard shortcuts in GNOME see the official documentation.

+ + +

If you are using a dedicated foot pedal, it should be possible to map the foot pedal signals to any of the keys. This is not well tested, however. Any feedback regarding foot pedals is welcome.

+ + diff -Nru parlatype-1.5.4/help/sk/preferences.page parlatype-1.5.6/help/sk/preferences.page --- parlatype-1.5.4/help/sk/preferences.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/preferences.page 2018-08-17 10:46:19.000000000 +0000 @@ -0,0 +1,58 @@ + + + + + How to customize Parlatype + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Preferences + +

You can reach the preferences window in the Application Menu (next to Activities in the top left corner. There are three tabs: Waveform, Controls and Window.

+ +
+Waveform + + + + +

Resolution: The resolution of the waveform image is given in pixels per second, e.g. the default resolution of 100 means, that one second is shown with a width of 100 pixels.

 +

Fixed vs. moving cursor: There are two modes, how to follow the cursor. On slower systems a moving cursor might be smoother.

 +

Show time scale: Turn the time scale on or off.

 + +
+ +
+Controls + + + + +

Jump back on pause: Parlatype will rewind a few seconds on each pause, this way you can easier resume typing. Set this value to 0 if you don't want this behaviour.

 +

Jump back: Configures how many seconds to skip when the Jump back button is pressed.

 +

Jump forward: Configures how many seconds to skip when the Jump forward button is pressed.

 + +
+ +
+Window + + + + +

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

 +

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

 +

Start on top: This will put Parlatype on start-up on top of other windows. This might be useful if you are working with a maximized word processor and still want to see the Parlatype window.

 + + + +

Remember position and Start on top are not available on Wayland.

+ + +
+ + diff -Nru parlatype-1.5.4/help/sk/selections.page parlatype-1.5.6/help/sk/selections.page --- parlatype-1.5.4/help/sk/selections.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/selections.page 2018-08-17 10:46:19.000000000 +0000 @@ -0,0 +1,23 @@ + + + + + How to play and repeat a selection + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Selections + +

You can select a piece of the waveform with the mouse. Next time you press Play, it will play the selection only. When it is finished and you press Play again, it will loop the selection once.

+ +

When in selection mode, you can not exit the selection anymore until you deselect it.

 + +

Selections can be made with the mouse (or pointer device) with a left click, holding the mouse button and dragging the pointer. If you click with Shift key pressed, an already existing selection will be enlarged to that point.

+ +

To deselect click once with the left button into the waveform. If the waveform has keyboard focus, you can press Escape.

+ + diff -Nru parlatype-1.5.4/help/sk/sk.po parlatype-1.5.6/help/sk/sk.po --- parlatype-1.5.4/help/sk/sk.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/sk.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,801 @@ +# Slovak translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: FULL NAME \n" +"POT-Creation-Date: 2018-06-04 14:41+0200\n" +"PO-Revision-Date: 2017-11-23 21:21+0000\n" +"Last-Translator: Launchpad Translations Administrators \n" +"Language-Team: Slovak \n" +"Language: sk\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" + +#. Put one translator per line, in the form NAME , YEAR1, YEAR2 +msgctxt "_" +msgid "translator-credits" +msgstr "" + +#. (itstool) path: info/title +#: C/index.page:7 +msgctxt "text" +msgid "Parlatype" +msgstr "" + +#. (itstool) path: info/title +#: C/index.page:8 +msgctxt "link" +msgid "Parlatype" +msgstr "" + +#. (itstool) path: credit/name +#: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 +#: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 +#: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 +msgid "Gabor Karsay" +msgstr "" + +#. (itstool) path: info/desc +#. (itstool) path: page/p +#: C/index.page:14 C/index.page:23 +msgid "" +"Parlatype is an easy to use media player. Its main purpose is to " +"help you transcribing speech." +msgstr "" + +#. (itstool) path: page/title +#: C/index.page:18 +msgid "<_:media-1/> Parlatype" +msgstr "" + +#. (itstool) path: page/p +#: C/index.page:24 +msgid "" +"For a quick overview have a look at . Other " +"topics are covered below." +msgstr "" + +#. (itstool) path: section/title +#: C/index.page:27 +msgid "Help topics" +msgstr "" + +#. (itstool) path: info/desc +#: C/drag-and-drop.page:6 +msgid "Drop files, file names or timestamps on Parlatype" +msgstr "" + +#. (itstool) path: page/title +#: C/drag-and-drop.page:14 +msgid "Drag and Drop" +msgstr "" + +#. (itstool) path: page/p +#: C/drag-and-drop.page:16 +msgid "" +"You can drop files, file names or timestamps on Parlatype's " +"window." +msgstr "" + +#. (itstool) path: item/p +#: C/drag-and-drop.page:19 +msgid "" +"Files: Drag and drop a file from a file manager, e.g. Files, on " +"Parlatype and it will open that file." +msgstr "" + +#. (itstool) path: item/p +#: C/drag-and-drop.page:20 +msgid "" +"File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " +"file. This will always work if the selection contains a full path. If you " +"select the name only, Parlatype will look up its full path in the " +"list of recent files and open it if it can find it in that list." +msgstr "" + +#. (itstool) path: item/p +#: C/drag-and-drop.page:21 +msgid "" +"Timestamps: You can drag and drop timestamps in both directions. Select a " +"timestamp from a word processor, e.g. LibreOffice, drop the " +"selected text on Parlatype and it will jump to that position. Or " +"you click on Parlatype's time label and drag it to a word " +"processor to insert it there." +msgstr "" + +#. (itstool) path: info/desc +#. (itstool) path: page/title +#: C/first-steps.page:6 C/first-steps.page:14 +msgid "First steps with Parlatype" +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:16 +msgid "" +"Parlatype is an easy to use audio player to help you transcribing " +"or annotating recorded speech. You need to run a word processor, e.g. " +"LibreOffice, too. Launch Parlatype and open an audio " +"file by clicking on the Open button in the upper left corner." +msgstr "" + +#. (itstool) path: note/p +#: C/first-steps.page:19 +msgid "" +"You can also drag and drop a file on Parlatype or open the " +"recently used files in the Application menu." +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:22 +msgid "" +"Now in the upper left corner there is a Play button which toggles " +"between play and pause. Whenever you pause, Parlatype rewinds a " +"few seconds to make it easier to resume. This can be changed in the ." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/first-steps.page:24 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-main-window.png' " +"md5='c57ce9c636f96646e8ba668d290fb352'" +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:26 +msgid "" +"The buttons Jump back and Jump forward in the lower " +"left corner skip a few seconds back or ahead. The amount of time can be " +"changed in the ." +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:28 +msgid "" +"The view scrolls automatically so that the cursor is always visible. You can " +"scroll manually by clicking on or dragging the scroll bar or using the " +"standard keybindings. Automatic scrolling is stopped then." +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:30 +msgid "" +"To get back to the cursor's position and let the view scroll automatically " +"again, click on the Go to button next to the time label. Clicking " +"on the Play button also turns automatic scrolling on." +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:32 +msgid "" +"Clicking in the view with the right mouse button will put the cursor there, " +"also holding the right mouse button pressed and moving it. The left mouse " +"button is for ." +msgstr "" + +#. (itstool) path: page/p +#: C/first-steps.page:34 +msgid "" +"The speed scale next to the volume button in the lower " +"right corner lets you adjust the speed of playback. A value of 1 means " +"normal speed, everything lower (down to 0.5) is slower, everything above is " +"faster." +msgstr "" + +#. (itstool) path: info/desc +#: C/keyboard-shortcuts.page:6 +msgid "Standard keyboard shortcuts in Parlatype" +msgstr "" + +#. (itstool) path: page/title +#: C/keyboard-shortcuts.page:14 +msgid "Keyboard shortcuts" +msgstr "" + +#. (itstool) path: page/p +#: C/keyboard-shortcuts.page:16 +msgid "" +"Keyboard shortcuts for Parlatype control, like Play, " +"are described in . Shortcut keys for the window are " +"listed below." +msgstr "" + +#. (itstool) path: table/title +#: C/keyboard-shortcuts.page:19 +msgid "Standard Shortcut keys" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:22 +msgid "To Do This" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:23 +msgid "Press This" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:28 +msgid "Show help" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:29 +msgid "F1" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:32 +msgid "Open file" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:33 +msgid "Ctrlo" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:36 +msgid "Open recent files" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:37 +msgid "Ctrlr" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:40 +msgid "Play/Pause" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:41 +msgid "CtrlSpace" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:44 +msgid "Go to …" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:45 +msgid "Ctrlg" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:48 +msgid "Jump back" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:49 +msgid "CtrlLeft" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:52 +msgid "Jump forward" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:53 +msgid "CtrlRight" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:56 +msgid "Copy timestamp" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:57 +msgid "Ctrlc" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:60 +msgid "Insert timestamp" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:61 +msgid "Ctrlv" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:64 +msgid "Zoom in" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:65 +msgid "Ctrl+" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:68 +msgid "Zoom out" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:69 +msgid "Ctrl-" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:72 +msgid "Quit" +msgstr "" + +#. (itstool) path: td/p +#: C/keyboard-shortcuts.page:73 +msgid "Ctrlq" +msgstr "" + +#. (itstool) path: p/link +#: C/legal.xml:5 +msgid "Creative Commons Attribution-ShareAlike 4.0 International" +msgstr "" + +#. (itstool) path: license/p +#: C/legal.xml:4 +msgid "This work is licensed under a <_:link-1/> license." +msgstr "" + +#. (itstool) path: info/desc +#: C/media-keys.page:6 +msgid "How to control Parlatype with media keys" +msgstr "" + +#. (itstool) path: page/title +#: C/media-keys.page:14 +msgid "Media keys" +msgstr "" + +#. (itstool) path: page/p +#: C/media-keys.page:16 +msgid "" +"Parlatype's basic functions can be controlled with so called " +"media keys. Media keys are used system wide to control media " +"players and they are working even if the media player is not in focus or in " +"the background." +msgstr "" + +#. (itstool) path: page/p +#: C/media-keys.page:18 +msgid "" +"You can change the media keys in GNOME settings. You can use dedicated keys " +"from a multimedia keyboard or use any other key or combination of keys." +msgstr "" + +#. (itstool) path: note/p +#: C/media-keys.page:21 +msgid "" +"This will affect other media players, e.g. Totem or " +"Rhythmbox, as well." +msgstr "" + +#. (itstool) path: page/p +#: C/media-keys.page:24 +msgid "Parlatype listens to these key strokes:" +msgstr "" + +#. (itstool) path: item/p +#: C/media-keys.page:26 +msgid "" +"Play, Pause, Stop: Each of these keys " +"toggles between playing and pause." +msgstr "" + +#. (itstool) path: item/p +#: C/media-keys.page:27 +msgid "" +"Rewind, Previous: Each of these keys will jump back " +"the time you selected in Preferences." +msgstr "" + +#. (itstool) path: item/p +#: C/media-keys.page:28 +msgid "" +"Fast Forward, Next: Each of these keys will jump ahead " +"the time you selected in Preferences." +msgstr "" + +#. (itstool) path: note/p +#: C/media-keys.page:32 +msgid "" +"For detailed instructions how to change keyboard shortcuts in GNOME see the " +"official " +"documentation." +msgstr "" + +#. (itstool) path: page/p +#: C/media-keys.page:35 +msgid "" +"If you are using a dedicated foot pedal, it should be possible to map the " +"foot pedal signals to any of the keys. This is not well tested, however. Any " +"feedback regarding foot pedals is welcome." +msgstr "" + +#. (itstool) path: info/desc +#: C/preferences.page:6 +msgid "How to customize Parlatype" +msgstr "" + +#. (itstool) path: page/title +#: C/preferences.page:14 +msgid "Preferences" +msgstr "" + +#. (itstool) path: page/p +#: C/preferences.page:16 +msgid "" +"You can reach the preferences window in the Application Menu (next to " +"Activities in the top left corner. There are three tabs: " +"Waveform, Controls and Window." +msgstr "" + +#. (itstool) path: section/title +#: C/preferences.page:19 +msgid "Waveform" +msgstr "" + +#. (itstool) path: section/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/preferences.page:21 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-prefs-waveform.png' " +"md5='e9d05960162dcdddab10378e21ce63da'" +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:24 +msgid "" +"Resolution: The resolution of the waveform image is given in pixels per " +"second, e.g. the default resolution of 100 means, that one second is shown " +"with a width of 100 pixels." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:25 +msgid "" +"Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " +"slower systems a moving cursor might be smoother." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:26 +msgid "Show time scale: Turn the time scale on or off." +msgstr "" + +#. (itstool) path: section/title +#: C/preferences.page:31 +msgid "Controls" +msgstr "" + +#. (itstool) path: section/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/preferences.page:33 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-prefs-controls.png' " +"md5='0b50614222d881110b176c2e28b7d18c'" +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:36 +msgid "" +"Jump back on pause: Parlatype will rewind a few seconds on each " +"pause, this way you can easier resume typing. Set this value to 0 if you " +"don't want this behaviour." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:37 +msgid "" +"Jump back: Configures how many seconds to skip when the Jump back " +"button is pressed." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:38 +msgid "" +"Jump forward: Configures how many seconds to skip when the Jump " +"forward button is pressed." +msgstr "" + +#. (itstool) path: section/title +#: C/preferences.page:43 +msgid "Window" +msgstr "" + +#. (itstool) path: section/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/preferences.page:45 +msgctxt "_" +msgid "" +"external ref='figures/parlatype-prefs-window.png' " +"md5='6affc475c74223fa48e7de25393fe7de'" +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:48 +msgid "" +"Remember size: On start-up Parlatype sets the window size to the " +"size it had the last time." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:49 +msgid "" +"Remember position: On start-up Parlatype can position its window " +"where you had it when you closed Parlatype last time." +msgstr "" + +#. (itstool) path: item/p +#: C/preferences.page:50 +msgid "" +"Start on top: This will put Parlatype on start-up on top of other " +"windows. This might be useful if you are working with a maximized word " +"processor and still want to see the Parlatype window." +msgstr "" + +#. (itstool) path: note/p +#: C/preferences.page:54 +msgid "" +"Remember position and Start on top are not available " +"on Wayland." +msgstr "" + +#. (itstool) path: info/desc +#: C/selections.page:6 +msgid "How to play and repeat a selection" +msgstr "" + +#. (itstool) path: page/title +#: C/selections.page:14 +msgid "Selections" +msgstr "" + +#. (itstool) path: page/p +#: C/selections.page:16 +msgid "" +"You can select a piece of the waveform with the mouse. Next time you press " +"Play, it will play the selection only. When it is finished and " +"you press Play again, it will loop the selection once." +msgstr "" + +#. (itstool) path: note/p +#: C/selections.page:18 +msgid "" +"When in selection mode, you can not exit the selection anymore until you " +"deselect it." +msgstr "" + +#. (itstool) path: page/p +#: C/selections.page:20 +msgid "" +"Selections can be made with the mouse (or pointer device) with a left click, " +"holding the mouse button and dragging the pointer. If you click with " +"Shift key pressed, an already existing selection will be enlarged " +"to that point." +msgstr "" + +#. (itstool) path: page/p +#: C/selections.page:22 +msgid "" +"To deselect click once with the left button into the waveform. If the " +"waveform has keyboard focus, you can press Escape." +msgstr "" + +#. (itstool) path: info/desc +#: C/timestamps.page:6 +msgid "Set and go to timestamps" +msgstr "" + +#. (itstool) path: page/title +#: C/timestamps.page:14 +msgid "Timestamps" +msgstr "" + +#. (itstool) path: page/p +#: C/timestamps.page:16 +msgid "Timestamps help you to navigate in your transcription." +msgstr "" + +#. (itstool) path: note/p +#: C/timestamps.page:19 +msgid "" +"Timestamps look like this: #03:45.2#. You can select them with or without " +"the number signs." +msgstr "" + +#. (itstool) path: section/title +#: C/timestamps.page:23 +msgid "Drag and drop" +msgstr "" + +#. (itstool) path: section/p +#: C/timestamps.page:25 +msgid "" +"If you select the timestamp in the word processor, you can drag and drop it " +"on the Parlatype window and it will go to that position. This is " +"also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." +msgstr "" + +#. (itstool) path: section/title +#: C/timestamps.page:29 +msgid "Using the clipboard" +msgstr "" + +#. (itstool) path: section/p +#: C/timestamps.page:31 +msgid "" +"First make sure, the Parlatype window has focus. With the key " +"sequence Ctrlc the current timestamp " +"is copied to the clipboard. Changing to the word processor you can insert " +"now the timestamp in your transcription." +msgstr "" + +#. (itstool) path: section/p +#: C/timestamps.page:32 +msgid "" +"To go to a timestamp position, copy the timestamp in the word processor to " +"the clipboard. Once you have changed focus to Parlatype press " +"Ctrlv." +msgstr "" + +#. (itstool) path: info/desc +#: C/libreoffice-helpers.page:7 +msgid "Use Parlatype with LibreOffice" +msgstr "" + +#. (itstool) path: page/title +#. (itstool) path: table/title +#: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 +msgid "LibreOffice Helpers" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:17 +msgid "" +"LibreOffice Helpers let you control Parlatype from " +"LibreOffice. For example, you can jump easily to timestamps." +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:19 +msgid "" +"To use them, you have to assign keyboard shortcuts in LibreOffice " +"itself. To do this, open LibreOffice, go to menu Tools " +"and select Customize." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:21 +msgctxt "_" +msgid "" +"external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:23 +msgid "" +"Go to tab Keyboard. In the lower part, Functions, " +"there is a list called Category. At the end of that list you'll " +"find the entry LibreOffice Macros. There is a subcategory " +"share which has a subcategory Parlatype. After " +"selecting Parlatype there will be a list of functions in the " +"Functions list. Choose the function you'd like to use, select " +"from the list Shortcut keys above a shortcut and click on the " +"button Modify." +msgstr "" + +#. (itstool) path: page/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/libreoffice-helpers.page:25 +msgctxt "_" +msgid "" +"external ref='figures/lo-customize.png' " +"md5='081564921275129bee7bbd10220547e7'" +msgstr "" + +#. (itstool) path: page/p +#: C/libreoffice-helpers.page:27 +msgid "You can select any of these functions:" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:33 +msgid "Helper's name" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:34 +msgid "What it does" +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:40 +msgid "" +"Toggles between play and pause. Depending on your preferences set in " +"Parlatype it will rewind a few seconds on pause." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:44 +msgid "" +"Jumps back a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:48 +msgid "" +"Jumps forward a few seconds, depending on the preferences you set in " +"Parlatype." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:52 +msgid "" +"Inserts the current timestamp at the cursor's position. It does not " +"overwrite any selection." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:56 +msgid "The same as above, but on a new line." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:60 +msgid "" +"If the cursor is set on a timestamp, it will jump to that position. The " +"cursor has to be somewhere between the two number signs (#). Don't select " +"the timestamp, just put the cursor inside." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:64 +msgid "Increases playback speed." +msgstr "" + +#. (itstool) path: td/p +#: C/libreoffice-helpers.page:68 +msgid "Decreases playback speed." +msgstr "" diff -Nru parlatype-1.5.4/help/sk/timestamps.page parlatype-1.5.6/help/sk/timestamps.page --- parlatype-1.5.4/help/sk/timestamps.page 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/help/sk/timestamps.page 2018-08-17 10:46:19.000000000 +0000 @@ -0,0 +1,34 @@ + + + + + Set and go to timestamps + + Gabor Karsay + gabor.karsay@gmx.at + + + + +Timestamps + +

Timestamps help you to navigate in your transcription.

+ + +

Timestamps look like this: #03:45.2#. You can select them with or without the number signs.

+ + +
+Drag and drop + +

If you select the timestamp in the word processor, you can drag and drop it on the Parlatype window and it will go to that position. This is also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it.

+
+ +
+Using the clipboard + +

First make sure, the Parlatype window has focus. With the key sequence Ctrlc the current timestamp is copied to the clipboard. Changing to the word processor you can insert now the timestamp in your transcription.

+

To go to a timestamp position, copy the timestamp in the word processor to the clipboard. Once you have changed focus to Parlatype press Ctrlv.

+
+ + diff -Nru parlatype-1.5.4/install-sh parlatype-1.5.6/install-sh --- parlatype-1.5.4/install-sh 2017-10-12 10:56:12.000000000 +0000 +++ parlatype-1.5.6/install-sh 2018-04-09 18:23:15.000000000 +0000 @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2011-11-20.07; # UTC +scriptversion=2014-09-12.12; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -41,19 +41,15 @@ # This script is compatible with the BSD install script, but was written # from scratch. +tab=' ' nl=' ' -IFS=" "" $nl" +IFS=" $tab$nl" -# set DOITPROG to echo to test this script +# Set DOITPROG to "echo" to test this script. -# Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi +doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. @@ -68,17 +64,6 @@ rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - posix_mkdir= # Desired mode of installed file. @@ -97,7 +82,7 @@ dst_arg= copy_on_change=false -no_target_directory= +is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE @@ -137,46 +122,57 @@ -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift;; + shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift;; + shift;; -s) stripcmd=$stripprog;; - -t) dst_arg=$2 - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; - -T) no_target_directory=true;; + -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; - --) shift - break;; + --) shift + break;; - -*) echo "$0: invalid option: $1" >&2 - exit 1;; + -*) echo "$0: invalid option: $1" >&2 + exit 1;; *) break;; esac shift done +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. @@ -208,6 +204,15 @@ fi if test -z "$dir_arg"; then + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 @@ -223,16 +228,16 @@ *[0-7]) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw='% 200' + u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw=,u+rw + u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac @@ -269,41 +274,15 @@ # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - + dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi @@ -314,81 +293,81 @@ if test $dstdir_status != 0; then case $posix_mkdir in '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) # $RANDOM is not portable (e.g. dash); use it when possible to # lower collision chance - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 - # As "mkdir -p" follows symlinks and we work in /tmp possibly; so - # create the $tmpdir first (and fail if unsuccessful) to make sure - # that nobody tries to guess the $tmpdir name. - if (umask $mkdir_umask && - $mkdirprog $mkdir_mode "$tmpdir" && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - test_tmpdir="$tmpdir/a" - ls_ld_tmpdir=`ls -ld "$test_tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null - fi - trap '' 0;; - esac;; + # As "mkdir -p" follows symlinks and we work in /tmp possibly; so + # create the $tmpdir first (and fail if unsuccessful) to make sure + # that nobody tries to guess the $tmpdir name. + if (umask $mkdir_umask && + $mkdirprog $mkdir_mode "$tmpdir" && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + test_tmpdir="$tmpdir/a" + ls_ld_tmpdir=`ls -ld "$test_tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null + fi + trap '' 0;; + esac;; esac if $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else @@ -398,53 +377,51 @@ # directory the slow way, step by step, checking for races as we go. case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; esac - eval "$initialize_posix_glob" - oIFS=$IFS IFS=/ - $posix_glob set -f + set -f set fnord $dstdir shift - $posix_glob set +f + set +f IFS=$oIFS prefixes= for d do - test X"$d" = X && continue + test X"$d" = X && continue - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ done if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi fi fi @@ -479,15 +456,12 @@ # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - + set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then @@ -500,24 +474,24 @@ # to itself, or perhaps because mv is so ancient that it does not # support -f. { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 diff -Nru parlatype-1.5.4/libparlatype/aclocal.m4 parlatype-1.5.6/libparlatype/aclocal.m4 --- parlatype-1.5.4/libparlatype/aclocal.m4 2017-11-19 15:49:46.000000000 +0000 +++ parlatype-1.5.6/libparlatype/aclocal.m4 2018-08-17 10:45:33.000000000 +0000 @@ -1,6 +1,6 @@ -# generated automatically by aclocal 1.14.1 -*- Autoconf -*- +# generated automatically by aclocal 1.15 -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -202,19 +202,19 @@ ]) # nls.m4 serial 5 (gettext-0.18) -dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014 Free Software Foundation, -dnl Inc. +dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016 Free Software +dnl Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl -dnl This file can can be used in projects which are not available under +dnl This file can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. +dnl gettext package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: @@ -234,32 +234,63 @@ AC_SUBST([USE_NLS]) ]) -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 1 (pkg-config-0.24) -# -# Copyright © 2004 Scott James Remnant . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- +dnl pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +dnl serial 11 (pkg-config-0.29) +dnl +dnl Copyright © 2004 Scott James Remnant . +dnl Copyright © 2012-2015 Dan Nicholson +dnl +dnl This program is free software; you can redistribute it and/or modify +dnl it under the terms of the GNU General Public License as published by +dnl the Free Software Foundation; either version 2 of the License, or +dnl (at your option) any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl General Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License +dnl along with this program; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +dnl 02111-1307, USA. +dnl +dnl As a special exception to the GNU General Public License, if you +dnl distribute this file as part of a program that contains a +dnl configuration script generated by Autoconf, you may include it under +dnl the same distribution terms that you use for the rest of that +dnl program. + +dnl PKG_PREREQ(MIN-VERSION) +dnl ----------------------- +dnl Since: 0.29 +dnl +dnl Verify that the version of the pkg-config macros are at least +dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's +dnl installed version of pkg-config, this checks the developer's version +dnl of pkg.m4 when generating configure. +dnl +dnl To ensure that this macro is defined, also add: +dnl m4_ifndef([PKG_PREREQ], +dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) +dnl +dnl See the "Since" comment for each macro you use to see what version +dnl of the macros you require. +m4_defun([PKG_PREREQ], +[m4_define([PKG_MACROS_VERSION], [0.29]) +m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, + [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) +])dnl PKG_PREREQ + +dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) +dnl ---------------------------------- +dnl Since: 0.16 +dnl +dnl Search for the pkg-config tool and set the PKG_CONFIG variable to +dnl first found in the path. Checks that the version of pkg-config found +dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is +dnl used since that's the first version where most current features of +dnl pkg-config existed. AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) @@ -281,18 +312,19 @@ PKG_CONFIG="" fi fi[]dnl -])# PKG_PROG_PKG_CONFIG +])dnl PKG_PROG_PKG_CONFIG -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -# only at the first occurence in configure.ac, so if the first place -# it's called might be skipped (such as if it is within an "if", you -# have to call PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- +dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +dnl ------------------------------------------------------------------- +dnl Since: 0.18 +dnl +dnl Check to see whether a particular set of modules exists. Similar to +dnl PKG_CHECK_MODULES(), but does not set variables or print errors. +dnl +dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +dnl only at the first occurence in configure.ac, so if the first place +dnl it's called might be skipped (such as if it is within an "if", you +dnl have to call PKG_CHECK_EXISTS manually AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ @@ -302,8 +334,10 @@ $3])dnl fi]) -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- +dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +dnl --------------------------------------------- +dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting +dnl pkg_failed based on the result. m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" @@ -315,10 +349,11 @@ else pkg_failed=untried fi[]dnl -])# _PKG_CONFIG +])dnl _PKG_CONFIG -# _PKG_SHORT_ERRORS_SUPPORTED -# ----------------------------- +dnl _PKG_SHORT_ERRORS_SUPPORTED +dnl --------------------------- +dnl Internal check to see if pkg-config supports short errors. AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then @@ -326,19 +361,17 @@ else _pkg_short_errors_supported=no fi[]dnl -])# _PKG_SHORT_ERRORS_SUPPORTED +])dnl _PKG_SHORT_ERRORS_SUPPORTED -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) -# -# -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- +dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +dnl [ACTION-IF-NOT-FOUND]) +dnl -------------------------------------------------------------- +dnl Since: 0.4.0 +dnl +dnl Note that if there is a possibility the first call to +dnl PKG_CHECK_MODULES might not happen, you should be sure to include an +dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl @@ -392,16 +425,40 @@ AC_MSG_RESULT([yes]) $3 fi[]dnl -])# PKG_CHECK_MODULES +])dnl PKG_CHECK_MODULES + + +dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +dnl [ACTION-IF-NOT-FOUND]) +dnl --------------------------------------------------------------------- +dnl Since: 0.29 +dnl +dnl Checks for existence of MODULES and gathers its build flags with +dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags +dnl and VARIABLE-PREFIX_LIBS from --libs. +dnl +dnl Note that if there is a possibility the first call to +dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to +dnl include an explicit call to PKG_PROG_PKG_CONFIG in your +dnl configure.ac. +AC_DEFUN([PKG_CHECK_MODULES_STATIC], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +_save_PKG_CONFIG=$PKG_CONFIG +PKG_CONFIG="$PKG_CONFIG --static" +PKG_CHECK_MODULES($@) +PKG_CONFIG=$_save_PKG_CONFIG[]dnl +])dnl PKG_CHECK_MODULES_STATIC -# PKG_INSTALLDIR(DIRECTORY) -# ------------------------- -# Substitutes the variable pkgconfigdir as the location where a module -# should install pkg-config .pc files. By default the directory is -# $libdir/pkgconfig, but the default can be changed by passing -# DIRECTORY. The user can override through the --with-pkgconfigdir -# parameter. +dnl PKG_INSTALLDIR([DIRECTORY]) +dnl ------------------------- +dnl Since: 0.27 +dnl +dnl Substitutes the variable pkgconfigdir as the location where a module +dnl should install pkg-config .pc files. By default the directory is +dnl $libdir/pkgconfig, but the default can be changed by passing +dnl DIRECTORY. The user can override through the --with-pkgconfigdir +dnl parameter. AC_DEFUN([PKG_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) m4_pushdef([pkg_description], @@ -412,16 +469,18 @@ AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) -]) dnl PKG_INSTALLDIR +])dnl PKG_INSTALLDIR -# PKG_NOARCH_INSTALLDIR(DIRECTORY) -# ------------------------- -# Substitutes the variable noarch_pkgconfigdir as the location where a -# module should install arch-independent pkg-config .pc files. By -# default the directory is $datadir/pkgconfig, but the default can be -# changed by passing DIRECTORY. The user can override through the -# --with-noarch-pkgconfigdir parameter. +dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) +dnl -------------------------------- +dnl Since: 0.27 +dnl +dnl Substitutes the variable noarch_pkgconfigdir as the location where a +dnl module should install arch-independent pkg-config .pc files. By +dnl default the directory is $datadir/pkgconfig, but the default can be +dnl changed by passing DIRECTORY. The user can override through the +dnl --with-noarch-pkgconfigdir parameter. AC_DEFUN([PKG_NOARCH_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) m4_pushdef([pkg_description], @@ -432,13 +491,15 @@ AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) -]) dnl PKG_NOARCH_INSTALLDIR +])dnl PKG_NOARCH_INSTALLDIR -# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, -# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# ------------------------------------------- -# Retrieves the value of the pkg-config variable for the given module. +dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, +dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +dnl ------------------------------------------- +dnl Since: 0.28 +dnl +dnl Retrieves the value of the pkg-config variable for the given module. AC_DEFUN([PKG_CHECK_VAR], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl @@ -447,9 +508,9 @@ AS_VAR_COPY([$1], [pkg_cv_][$1]) AS_VAR_IF([$1], [""], [$5], [$4])dnl -])# PKG_CHECK_VAR +])dnl PKG_CHECK_VAR -# Copyright (C) 2002-2013 Free Software Foundation, Inc. +# Copyright (C) 2002-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -461,10 +522,10 @@ # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.14' +[am__api_version='1.15' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.14.1], [], +m4_if([$1], [1.15], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -480,14 +541,14 @@ # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.14.1])dnl +[AM_AUTOMAKE_VERSION([1.15])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -539,7 +600,7 @@ # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# Copyright (C) 1997-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -570,7 +631,7 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -761,7 +822,7 @@ # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -837,7 +898,7 @@ # AM_EXTRA_RECURSIVE_TARGETS -*- Autoconf -*- -# Copyright (C) 2012-2013 Free Software Foundation, Inc. +# Copyright (C) 2012-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -854,7 +915,7 @@ # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -944,8 +1005,8 @@ # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl @@ -1019,6 +1080,9 @@ AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not @@ -1048,7 +1112,7 @@ done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1059,7 +1123,7 @@ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -1069,7 +1133,7 @@ fi AC_SUBST([install_sh])]) -# Copyright (C) 2003-2013 Free Software Foundation, Inc. +# Copyright (C) 2003-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1090,7 +1154,7 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1140,7 +1204,7 @@ # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# Copyright (C) 1997-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1179,7 +1243,7 @@ # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1208,7 +1272,7 @@ AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1255,7 +1319,7 @@ # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1274,7 +1338,7 @@ # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1355,7 +1419,7 @@ rm -f conftest.file ]) -# Copyright (C) 2009-2013 Free Software Foundation, Inc. +# Copyright (C) 2009-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1415,7 +1479,7 @@ _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1443,7 +1507,7 @@ INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006-2013 Free Software Foundation, Inc. +# Copyright (C) 2006-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1462,7 +1526,7 @@ # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004-2013 Free Software Foundation, Inc. +# Copyright (C) 2004-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, diff -Nru parlatype-1.5.4/libparlatype/compile parlatype-1.5.6/libparlatype/compile --- parlatype-1.5.4/libparlatype/compile 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/libparlatype/compile 2018-04-09 18:22:52.000000000 +0000 @@ -3,7 +3,7 @@ scriptversion=2012-10-14.11; # UTC -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify diff -Nru parlatype-1.5.4/libparlatype/config.guess parlatype-1.5.6/libparlatype/config.guess --- parlatype-1.5.4/libparlatype/config.guess 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/libparlatype/config.guess 2018-04-09 18:22:52.000000000 +0000 @@ -1,8 +1,8 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright 1992-2014 Free Software Foundation, Inc. +# Copyright 1992-2016 Free Software Foundation, Inc. -timestamp='2014-03-23' +timestamp='2016-10-02' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -24,12 +24,12 @@ # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # -# Originally written by Per Bothner. +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. # # You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess # -# Please send patches with a ChangeLog entry to config-patches@gnu.org. +# Please send patches to . me=`echo "$0" | sed -e 's,.*/,,'` @@ -50,7 +50,7 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright 1992-2014 Free Software Foundation, Inc. +Copyright 1992-2016 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -168,19 +168,29 @@ # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + /sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || \ + echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; + earmv*) + arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'` + machine=${arch}${endian}-unknown + ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. + # to ELF recently (or will in the future) and ABI. case "${UNAME_MACHINE_ARCH}" in + earm*) + os=netbsdelf + ;; arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ @@ -197,6 +207,13 @@ os=netbsd ;; esac + # Determine ABI tags. + case "${UNAME_MACHINE_ARCH}" in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"` + ;; + esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need @@ -207,13 +224,13 @@ release='-gnu' ;; *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" + echo "${machine}-${os}${release}${abi}" exit ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` @@ -223,6 +240,10 @@ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; + *:LibertyBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE} + exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; @@ -235,6 +256,9 @@ *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; + *:Sortix:*:*) + echo ${UNAME_MACHINE}-unknown-sortix + exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) @@ -251,42 +275,42 @@ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") - UNAME_MACHINE="alpha" ;; + UNAME_MACHINE=alpha ;; "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; + UNAME_MACHINE=alpha ;; "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; + UNAME_MACHINE=alpha ;; "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; + UNAME_MACHINE=alphaev5 ;; "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; + UNAME_MACHINE=alphaev56 ;; "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; + UNAME_MACHINE=alphapca56 ;; "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; + UNAME_MACHINE=alphapca57 ;; "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; + UNAME_MACHINE=alphaev6 ;; "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; + UNAME_MACHINE=alphaev67 ;; "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; + UNAME_MACHINE=alphaev68 ;; "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; + UNAME_MACHINE=alphaev68 ;; "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; + UNAME_MACHINE=alphaev68 ;; "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; + UNAME_MACHINE=alphaev69 ;; "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; + UNAME_MACHINE=alphaev7 ;; "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; + UNAME_MACHINE=alphaev79 ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` # Reset EXIT trap before exiting to avoid spurious non-zero exit code. exitcode=$? trap '' 0 @@ -359,16 +383,16 @@ exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build - SUN_ARCH="i386" + SUN_ARCH=i386 # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then - SUN_ARCH="x86_64" + SUN_ARCH=x86_64 fi fi echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` @@ -393,7 +417,7 @@ exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} @@ -579,8 +603,9 @@ else IBM_ARCH=powerpc fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi @@ -617,13 +642,13 @@ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 + 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + 32) HP_ARCH=hppa2.0n ;; + 64) HP_ARCH=hppa2.0w ;; + '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 esac ;; esac fi @@ -662,11 +687,11 @@ exit (0); } EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac - if [ ${HP_ARCH} = "hppa2.0w" ] + if [ ${HP_ARCH} = hppa2.0w ] then eval $set_cc_for_build @@ -679,12 +704,12 @@ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then - HP_ARCH="hppa2.0w" + HP_ARCH=hppa2.0w else - HP_ARCH="hppa64" + HP_ARCH=hppa64 fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} @@ -789,14 +814,14 @@ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) @@ -878,7 +903,7 @@ exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix @@ -901,7 +926,7 @@ EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC="gnulibc1" ; fi + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arc:Linux:*:* | arceb:Linux:*:*) @@ -932,6 +957,9 @@ crisv32:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; + e2k:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; frv:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; @@ -944,6 +972,9 @@ ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; + k1om:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; @@ -969,6 +1000,9 @@ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } ;; + mips64el:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; openrisc*:Linux:*:*) echo or1k-unknown-linux-${LIBC} exit ;; @@ -1001,6 +1035,9 @@ ppcle:Linux:*:*) echo powerpcle-unknown-linux-${LIBC} exit ;; + riscv32:Linux:*:* | riscv64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux-${LIBC} exit ;; @@ -1020,7 +1057,7 @@ echo ${UNAME_MACHINE}-dec-linux-${LIBC} exit ;; x86_64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-pc-linux-${LIBC} exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} @@ -1099,7 +1136,7 @@ # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configury will decide that + # prints for the "djgpp" host, or else GDB configure will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; @@ -1248,6 +1285,9 @@ SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; + SX-ACE:SUPER-UX:*:*) + echo sxace-nec-superux${UNAME_RELEASE} + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; @@ -1261,9 +1301,9 @@ UNAME_PROCESSOR=powerpc fi if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in @@ -1285,7 +1325,7 @@ exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then + if test "$UNAME_PROCESSOR" = x86; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi @@ -1316,7 +1356,7 @@ # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. - if test "$cputype" = "386"; then + if test "$cputype" = 386; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" @@ -1358,7 +1398,7 @@ echo i386-pc-xenix exit ;; i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'` exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos @@ -1369,23 +1409,25 @@ x86_64:VMkernel:*:*) echo ${UNAME_MACHINE}-unknown-esx exit ;; + amd64:Isilon\ OneFS:*:*) + echo x86_64-unknown-onefs + exit ;; esac cat >&2 < in order to provide the needed -information to handle your system. +If $0 has already been updated, send the following data and any +information you think might be pertinent to config-patches@gnu.org to +provide the necessary information to handle your system. config.guess timestamp = $timestamp diff -Nru parlatype-1.5.4/libparlatype/config.h.in parlatype-1.5.6/libparlatype/config.h.in --- parlatype-1.5.4/libparlatype/config.h.in 2017-11-19 15:49:55.000000000 +0000 +++ parlatype-1.5.6/libparlatype/config.h.in 2018-08-17 10:45:51.000000000 +0000 @@ -33,8 +33,7 @@ /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H -/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ +/* Define to the sub-directory where libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Name of package */ diff -Nru parlatype-1.5.4/libparlatype/config.sub parlatype-1.5.6/libparlatype/config.sub --- parlatype-1.5.4/libparlatype/config.sub 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/libparlatype/config.sub 2018-04-09 18:22:52.000000000 +0000 @@ -1,8 +1,8 @@ #! /bin/sh # Configuration validation subroutine script. -# Copyright 1992-2014 Free Software Foundation, Inc. +# Copyright 1992-2016 Free Software Foundation, Inc. -timestamp='2014-09-11' +timestamp='2016-11-04' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -25,7 +25,7 @@ # of the GNU General Public License, version 3 ("GPLv3"). -# Please send patches with a ChangeLog entry to config-patches@gnu.org. +# Please send patches to . # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. @@ -33,7 +33,7 @@ # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases @@ -53,8 +53,7 @@ me=`echo "$0" | sed -e 's,.*/,,'` usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS +Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS Canonicalize a configuration name. @@ -68,7 +67,7 @@ version="\ GNU config.sub ($timestamp) -Copyright 1992-2014 Free Software Foundation, Inc. +Copyright 1992-2016 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -117,8 +116,8 @@ case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | \ - kopensolaris*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ + kopensolaris*-gnu* | cloudabi*-eabi* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` @@ -255,12 +254,13 @@ | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ + | ba \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ | d10v | d30v | dlx | dsp16xx \ - | epiphany \ - | fido | fr30 | frv \ + | e2k | epiphany \ + | fido | fr30 | frv | ft32 \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ | i370 | i860 | i960 | ia64 \ @@ -301,11 +301,12 @@ | open8 | or1k | or1knd | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pru \ | pyramid \ | riscv32 | riscv64 \ | rl78 | rx \ | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ @@ -313,6 +314,7 @@ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | visium \ | we32k \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) @@ -327,6 +329,9 @@ c6x) basic_machine=tic6x-unknown ;; + leon|leon[3-9]) + basic_machine=sparc-$basic_machine + ;; m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) basic_machine=$basic_machine-unknown os=-none @@ -372,12 +377,13 @@ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ + | ba-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | c8051-* | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ + | e2k-* | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ @@ -423,13 +429,15 @@ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pru-* \ | pyramid-* \ + | riscv32-* | riscv64-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ @@ -437,6 +445,7 @@ | ubicom32-* \ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ | vax-* \ + | visium-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ @@ -513,6 +522,9 @@ basic_machine=i386-pc os=-aros ;; + asmjs) + basic_machine=asmjs-unknown + ;; aux) basic_machine=m68k-apple os=-aux @@ -633,6 +645,14 @@ basic_machine=m68k-bull os=-sysv3 ;; + e500v[12]) + basic_machine=powerpc-unknown + os=$os"spe" + ;; + e500v[12]-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + os=$os"spe" + ;; ebmon29k) basic_machine=a29k-amd os=-ebmon @@ -774,6 +794,9 @@ basic_machine=m68k-isi os=-sysv ;; + leon-*|leon[3-9]-*) + basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` + ;; m68knommu) basic_machine=m68k-unknown os=-linux @@ -1009,7 +1032,7 @@ ppc-* | ppcbe-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - ppcle | powerpclittle | ppc-le | powerpc-little) + ppcle | powerpclittle) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) @@ -1019,7 +1042,7 @@ ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) + ppc64le | powerpc64little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) @@ -1365,18 +1388,18 @@ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* \ + | -aos* | -aros* | -cloudabi* | -sortix* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -bitrig* | -openbsd* | -solidbsd* \ + | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ @@ -1385,7 +1408,8 @@ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*) + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ + | -onefs* | -tirtos* | -phoenix* | -fuchsia*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1517,6 +1541,8 @@ ;; -nacl*) ;; + -ios) + ;; -none) ;; *) diff -Nru parlatype-1.5.4/libparlatype/configure parlatype-1.5.6/libparlatype/configure --- parlatype-1.5.4/libparlatype/configure 2017-11-19 15:49:48.000000000 +0000 +++ parlatype-1.5.6/libparlatype/configure 2018-08-17 10:45:36.000000000 +0000 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for libparlatype 1.5.4. +# Generated by GNU Autoconf 2.69 for libparlatype 1.5.6. # # Report bugs to . # @@ -590,8 +590,8 @@ # Identity of this package. PACKAGE_NAME='libparlatype' PACKAGE_TARNAME='libparlatype' -PACKAGE_VERSION='1.5.4' -PACKAGE_STRING='libparlatype 1.5.4' +PACKAGE_VERSION='1.5.6' +PACKAGE_STRING='libparlatype 1.5.6' PACKAGE_BUGREPORT='https://github.com/gkarsay/parlatype/issues' PACKAGE_URL='' @@ -725,6 +725,7 @@ PARLATYPE_API_VERSION PARLATYPE_SO_VERSION CPP +LT_SYS_LIBRARY_PATH OTOOL64 OTOOL LIPO @@ -745,16 +746,6 @@ EGREP GREP SED -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -LIBTOOL -DATADIRNAME am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE @@ -772,6 +763,15 @@ LDFLAGS CFLAGS CC +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +LIBTOOL ALL_LINGUAS INTLTOOL_PERL GMSGFMT @@ -854,6 +854,7 @@ docdir oldincludedir includedir +runstatedir localstatedir sharedstatedir sysconfdir @@ -878,11 +879,12 @@ enable_option_checking enable_silent_rules enable_nls -enable_dependency_tracking enable_static enable_shared with_pic enable_fast_install +with_aix_soname +enable_dependency_tracking with_gnu_ld with_sysroot enable_libtool_lock @@ -912,6 +914,7 @@ LDFLAGS LIBS CPPFLAGS +LT_SYS_LIBRARY_PATH CPP CXX CXXFLAGS @@ -966,6 +969,7 @@ sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' +runstatedir='${localstatedir}/run' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' @@ -1218,6 +1222,15 @@ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; + -runstatedir | --runstatedir | --runstatedi | --runstated \ + | --runstate | --runstat | --runsta | --runst | --runs \ + | --run | --ru | --r) + ac_prev=runstatedir ;; + -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ + | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ + | --run=* | --ru=* | --r=*) + runstatedir=$ac_optarg ;; + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ @@ -1355,7 +1368,7 @@ for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir + libdir localedir mandir runstatedir do eval ac_val=\$$ac_var # Remove trailing slashes. @@ -1468,7 +1481,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures libparlatype 1.5.4 to adapt to many kinds of systems. +\`configure' configures libparlatype 1.5.6 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1508,6 +1521,7 @@ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] @@ -1538,7 +1552,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of libparlatype 1.5.4:";; + short | recursive ) echo "Configuration of libparlatype 1.5.6:";; esac cat <<\_ACEOF @@ -1549,14 +1563,14 @@ --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --disable-nls do not use Native Language Support - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build --enable-static[=PKGS] build static libraries [default=no] --enable-shared[=PKGS] build shared libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build --disable-libtool-lock avoid locking (might break parallel builds) --disable-schemas-compile Disable regeneration of gschemas.compiled on install @@ -1586,9 +1600,12 @@ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] + --with-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot=DIR Search for dependent libraries within DIR - (or the compiler's sysroot if not specified). + --with-sysroot[=DIR] Search for dependent libraries within DIR (or the + compiler's sysroot if not specified). --with-html-dir=PATH path to installed docs --with-gcov=GCOV use given GCOV for coverage (GCOV=gcov). @@ -1600,6 +1617,8 @@ LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory + LT_SYS_LIBRARY_PATH + User-defined run-time library search path. CPP C preprocessor CXX C++ compiler command CXXFLAGS C++ compiler flags @@ -1689,7 +1708,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -libparlatype configure 1.5.4 +libparlatype configure 1.5.6 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -1787,73 +1806,6 @@ } # ac_fn_c_try_link -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in @@ -1964,6 +1916,73 @@ } # ac_fn_c_try_run +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + # ac_fn_cxx_try_compile LINENO # ---------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. @@ -2233,7 +2252,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by libparlatype $as_me 1.5.4, which was +It was created by libparlatype $as_me 1.5.6, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2610,7 +2629,7 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -am__api_version='1.14' +am__api_version='1.15' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or @@ -2802,7 +2821,7 @@ $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -3096,7 +3115,7 @@ # Define the identity of the package. PACKAGE='libparlatype' - VERSION='1.5.4' + VERSION='1.5.6' cat >>confdefs.h <<_ACEOF @@ -3130,8 +3149,8 @@ # mkdir_p='$(MKDIR_P)' -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' @@ -3210,133 +3229,48 @@ $as_echo "$USE_NLS" >&6; } -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; +case "$am__api_version" in + 1.01234) + as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 + ;; + *) + ;; esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= +INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.50.2 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` +INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` +INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` +if test -n "0.50.2"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.50.2" >&5 +$as_echo_n "checking for intltool >= 0.50.2... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 +$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } + test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || + as_fn_error $? "Your intltool is too old. You need intltool 0.50.2 or later." "$LINENO" 5 fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 +# Extract the first word of "intltool-update", so it can be a program name with args. +set dummy intltool-update; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + case $INTLTOOL_UPDATE in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" + ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -3344,52 +3278,39 @@ done IFS=$as_save_IFS + ;; +esac fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } +INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE +if test -n "$INTLTOOL_UPDATE"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 +$as_echo "$INTLTOOL_UPDATE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 +# Extract the first word of "intltool-merge", so it can be a program name with args. +set dummy intltool-merge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if ${ac_cv_path_INTLTOOL_MERGE+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + case $INTLTOOL_MERGE in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" + ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -3397,44 +3318,39 @@ done IFS=$as_save_IFS + ;; +esac fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } +INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE +if test -n "$INTLTOOL_MERGE"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 +$as_echo "$INTLTOOL_MERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 +# Extract the first word of "intltool-extract", so it can be a program name with args. +set dummy intltool-extract; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + case $INTLTOOL_EXTRACT in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" + ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -3442,846 +3358,173 @@ done IFS=$as_save_IFS -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi + ;; +esac fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } +INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT +if test -n "$INTLTOOL_EXTRACT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 +$as_echo "$INTLTOOL_EXTRACT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi +if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then + as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5 fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } +if test -z "$AM_DEFAULT_VERBOSITY"; then + AM_DEFAULT_VERBOSITY=1 fi - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS +INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' +INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' +INTLTOOL__v_MERGE_0='@echo " ITMRG " $@;' + + + + +INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' +intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' +intltool__v_merge_options_0='-q' + + + + + INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' +INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@' + INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' +INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' +if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then + INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@' +else + INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir' +fi + INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - test -n "$ac_ct_CC" && break -done - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi -fi -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -depcc="$CC" am_compiler_list= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi -case "$am__api_version" in - 1.01234) - as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 - ;; - *) - ;; -esac -INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.50.2 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` -INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -if test -n "0.50.2"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.50.2" >&5 -$as_echo_n "checking for intltool >= 0.50.2... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 -$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } - test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || - as_fn_error $? "Your intltool is too old. You need intltool 0.50.2 or later." "$LINENO" 5 -fi -# Extract the first word of "intltool-update", so it can be a program name with args. -set dummy intltool-update; ac_word=$2 + + + + + + +# Check the gettext tools to make sure they are GNU +# Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then : +if ${ac_cv_path_XGETTEXT+:} false; then : $as_echo_n "(cached) " >&6 else - case $INTLTOOL_UPDATE in + case $XGETTEXT in [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -4291,7 +3534,7 @@ test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" + ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -4302,26 +3545,26 @@ ;; esac fi -INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE -if test -n "$INTLTOOL_UPDATE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 -$as_echo "$INTLTOOL_UPDATE" >&6; } +XGETTEXT=$ac_cv_path_XGETTEXT +if test -n "$XGETTEXT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 +$as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -# Extract the first word of "intltool-merge", so it can be a program name with args. -set dummy intltool-merge; ac_word=$2 +# Extract the first word of "msgmerge", so it can be a program name with args. +set dummy msgmerge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_MERGE+:} false; then : +if ${ac_cv_path_MSGMERGE+:} false; then : $as_echo_n "(cached) " >&6 else - case $INTLTOOL_MERGE in + case $MSGMERGE in [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. + ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -4331,7 +3574,7 @@ test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" + ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -4342,26 +3585,26 @@ ;; esac fi -INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE -if test -n "$INTLTOOL_MERGE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 -$as_echo "$INTLTOOL_MERGE" >&6; } +MSGMERGE=$ac_cv_path_MSGMERGE +if test -n "$MSGMERGE"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 +$as_echo "$MSGMERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -# Extract the first word of "intltool-extract", so it can be a program name with args. -set dummy intltool-extract; ac_word=$2 +# Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then : +if ${ac_cv_path_MSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else - case $INTLTOOL_EXTRACT in + case $MSGFMT in [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -4371,7 +3614,7 @@ test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" + ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -4382,101 +3625,187 @@ ;; esac fi -INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT -if test -n "$INTLTOOL_EXTRACT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 -$as_echo "$INTLTOOL_EXTRACT" >&6; } +MSGFMT=$ac_cv_path_MSGFMT +if test -n "$MSGFMT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 +$as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then - as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5 -fi +# Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GMSGFMT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GMSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -if test -z "$AM_DEFAULT_VERBOSITY"; then - AM_DEFAULT_VERBOSITY=1 + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac fi - - -INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' -INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' -INTLTOOL__v_MERGE_0='@echo " ITMRG " $@;' - - - - -INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' -intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' -intltool__v_merge_options_0='-q' - - - - - INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@' - INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@' +GMSGFMT=$ac_cv_path_GMSGFMT +if test -n "$GMSGFMT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 +$as_echo "$GMSGFMT" >&6; } else - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir' + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - - - - - - - - - - - - - - - - - - - - - +if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then + as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 +fi +xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" +mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" +mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" +if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then + as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 +fi +# Extract the first word of "perl", so it can be a program name with args. +set dummy perl; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_INTLTOOL_PERL+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $INTLTOOL_PERL in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + ;; +esac +fi +INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL +if test -n "$INTLTOOL_PERL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 +$as_echo "$INTLTOOL_PERL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +if test -z "$INTLTOOL_PERL"; then + as_fn_error $? "perl not found" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 +$as_echo_n "checking for perl >= 5.8.1... " >&6; } +$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 +if test $? -ne 0; then + as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5 +else + IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 +$as_echo "$IT_PERL_VERSION" >&6; } +fi +if test "x" != "xno-xml"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 +$as_echo_n "checking for XML::Parser... " >&6; } + if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } + else + as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5 + fi +fi +# Substitute ALL_LINGUAS so we can use it in po/Makefile +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=0;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac +macro_version='2.4.6' +macro_revision='2.4.6' @@ -4490,22 +3819,134 @@ +ltmain=$ac_aux_dir/ltmain.sh +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} +case $ECHO in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac @@ -4520,42 +3961,186 @@ +DEPDIR="${am__leading_dot}deps" +ac_config_commands="$ac_config_commands depfiles" +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi -# Check the gettext tools to make sure they are GNU -# Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XGETTEXT+:} false; then : +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else - case $XGETTEXT in - [\\/]* | ?:[\\/]*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" + ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -4563,39 +4148,44 @@ done IFS=$as_save_IFS - ;; -esac fi -XGETTEXT=$ac_cv_path_XGETTEXT -if test -n "$XGETTEXT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 -$as_echo "$XGETTEXT" >&6; } +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -# Extract the first word of "msgmerge", so it can be a program name with args. -set dummy msgmerge; ac_word=$2 + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGMERGE+:} false; then : +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else - case $MSGMERGE in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -4603,39 +4193,53 @@ done IFS=$as_save_IFS - ;; -esac +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi fi -MSGMERGE=$ac_cv_path_MSGMERGE -if test -n "$MSGMERGE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 -$as_echo "$MSGMERGE" >&6; } +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -# Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGFMT+:} false; then : +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else - case $MSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -4643,381 +4247,757 @@ done IFS=$as_save_IFS - ;; -esac fi -MSGFMT=$ac_cv_path_MSGFMT -if test -n "$MSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 -$as_echo "$MSGFMT" >&6; } +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -# Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GMSGFMT+:} false; then : +if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done -IFS=$as_save_IFS + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 -$as_echo "$GMSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int +main () +{ -if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then - as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 -fi -xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" -mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" -mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" -if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then - as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 -fi + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -# Extract the first word of "perl", so it can be a program name with args. -set dummy perl; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_PERL+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $INTLTOOL_PERL in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac done - done -IFS=$as_save_IFS +rm -f $ac_rmfiles - ;; +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac -fi -INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL -if test -n "$INTLTOOL_PERL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 -$as_echo "$INTLTOOL_PERL" >&6; } +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + else + ac_file='' +fi +if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } -fi - +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -if test -z "$INTLTOOL_PERL"; then - as_fn_error $? "perl not found" "$LINENO" 5 +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 -$as_echo_n "checking for perl >= 5.8.1... " >&6; } -$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 -if test $? -ne 0; then - as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done else - IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 -$as_echo "$IT_PERL_VERSION" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } fi -if test "x" != "xno-xml"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 -$as_echo_n "checking for XML::Parser... " >&6; } - if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } - else - as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5 - fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } -# Substitute ALL_LINGUAS so we can use it in po/Makefile - - -# Set DATADIRNAME correctly if it is not set yet -# (copied from glib-gettext.m4) -if test -z "$DATADIRNAME"; then +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { -extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr + ; return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : - DATADIRNAME=share -else - case $host in - *-*-solaris*) - ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" -if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : - DATADIRNAME=share +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done else - DATADIRNAME=lib -fi + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - ;; - *) - DATADIRNAME=lib - ;; - esac -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } fi - - - - - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; +rm -f conftest.$ac_cv_objext conftest.$ac_ext fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=0;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes else - am_cv_make_support_nested_variables=no + ac_compiler_gnu=no fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY + GCC= fi -AM_BACKSLASH='\' - - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.4.2' -macro_revision='1.3337' - +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int +main () +{ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int +main () +{ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int +main () +{ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : -ltmain="$ac_aux_dir/ltmain.sh" +fi -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int +main () +{ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i fi - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' +depcc="$CC" am_compiler_list= -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' + cd .. + rm -rf conftest.dir else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' + am_cv_CC_dependencies_compiler_type=none fi -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case "$ECHO" in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 @@ -5321,19 +5301,19 @@ # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld -if test "$GCC" = yes; then +if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw + # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; @@ -5347,7 +5327,7 @@ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done - test -z "$LD" && LD="$ac_prog" + test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. @@ -5358,7 +5338,7 @@ with_gnu_ld=unknown ;; esac -elif test "$with_gnu_ld" = yes; then +elif test yes = "$with_gnu_ld"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else @@ -5369,32 +5349,32 @@ $as_echo_n "(cached) " >&6 else if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } @@ -5437,33 +5417,38 @@ else if test -n "$NM"; then # Let the user override the test. - lt_cv_path_NM="$NM" + lt_cv_path_NM=$NM else - lt_nm_to_check="${ac_tool_prefix}nm" + lt_nm_to_check=${ac_tool_prefix}nm if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" - break + break 2 ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" - break + break 2 ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but @@ -5474,15 +5459,15 @@ esac fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : @@ -5588,9 +5573,9 @@ fi fi - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) - DUMPBIN="$DUMPBIN -symbols" + DUMPBIN="$DUMPBIN -symbols -headers" ;; *) DUMPBIN=: @@ -5598,8 +5583,8 @@ esac fi - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" + if test : != "$DUMPBIN"; then + NM=$DUMPBIN fi fi test -z "$NM" && NM=nm @@ -5650,7 +5635,7 @@ $as_echo_n "(cached) " >&6 else i=0 - teststring="ABCD" + teststring=ABCD case $build_os in msdosdjgpp*) @@ -5690,7 +5675,7 @@ lt_cv_sys_max_cmd_len=8192; ;; - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` @@ -5741,22 +5726,22 @@ *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then + test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do + for i in 1 2 3 4 5 6 7 8; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough + test 17 != "$i" # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring @@ -5774,7 +5759,7 @@ fi -if test -n $lt_cv_sys_max_cmd_len ; then +if test -n "$lt_cv_sys_max_cmd_len"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else @@ -5792,30 +5777,6 @@ : ${MV="mv -f"} : ${RM="rm -f"} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -$as_echo "$xsi_shell" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -$as_echo "$lt_shell_append" >&6; } - - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else @@ -5938,13 +5899,13 @@ reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then + if test yes != "$GCC"; then reload_cmds=false fi ;; darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + if test yes = "$GCC"; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi @@ -6072,13 +6033,13 @@ # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. +# 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) @@ -6105,8 +6066,7 @@ # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else @@ -6202,8 +6162,8 @@ lt_cv_deplibs_check_method=pass_all ;; -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' @@ -6256,6 +6216,9 @@ tpf*) lt_cv_deplibs_check_method=pass_all ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; esac fi @@ -6413,8 +6376,8 @@ case $host_os in cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib @@ -6426,7 +6389,7 @@ ;; *) # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" + lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac @@ -6442,6 +6405,7 @@ + if test -n "$ac_tool_prefix"; then for ac_prog in ar do @@ -6580,7 +6544,7 @@ ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } - if test "$ac_status" -eq 0; then + if test 0 -eq "$ac_status"; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 @@ -6588,7 +6552,7 @@ ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } - if test "$ac_status" -ne 0; then + if test 0 -ne "$ac_status"; then lt_cv_ar_at_file=@ fi fi @@ -6601,7 +6565,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } -if test "x$lt_cv_ar_at_file" = xno; then +if test no = "$lt_cv_ar_at_file"; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file @@ -6818,7 +6782,7 @@ if test -n "$RANLIB"; then case $host_os in - openbsd*) + bitrig* | openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) @@ -6908,7 +6872,7 @@ symcode='[ABCDGISTW]' ;; hpux*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then symcode='[ABCDEGRST]' fi ;; @@ -6941,14 +6905,44 @@ symcode='[ABCDGIRSTW]' ;; esac +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" # Handle CRLF in mingw tool chain opt_cr= @@ -6966,21 +6960,24 @@ # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" @@ -7028,11 +7025,11 @@ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST -#elif defined(__osf__) +#elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else @@ -7058,7 +7055,7 @@ { { "@PROGRAM@", (void *) 0 }, _LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; @@ -7078,13 +7075,13 @@ mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" + LIBS=conftstm.$ac_objext CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then + test $ac_status = 0; } && test -s conftest$ac_exeext; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS @@ -7105,7 +7102,7 @@ rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then + if test yes = "$pipe_works"; then break else lt_cv_sys_global_symbol_pipe= @@ -7158,6 +7155,16 @@ + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } @@ -7170,9 +7177,9 @@ lt_sysroot= -case ${with_sysroot} in #( +case $with_sysroot in #( yes) - if test "$GCC" = yes; then + if test yes = "$GCC"; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( @@ -7182,8 +7189,8 @@ no|'') ;; #( *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -$as_echo "${with_sysroot}" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 +$as_echo "$with_sysroot" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac @@ -7195,18 +7202,99 @@ +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 +$as_echo_n "checking for a working dd... " >&6; } +if ${ac_cv_path_lt_DD+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +if test -z "$lt_DD"; then + ac_path_lt_DD_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in dd; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_lt_DD" || continue +if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi + $ac_path_lt_DD_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_lt_DD"; then + : + fi +else + ac_cv_path_lt_DD=$lt_DD +fi + +rm -f conftest.i conftest2.i conftest.out +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 +$as_echo "$ac_cv_path_lt_DD" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 +$as_echo_n "checking how to truncate binary pipes... " >&6; } +if ${lt_cv_truncate_bin+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 +$as_echo "$lt_cv_truncate_bin" >&6; } + + + + + + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +test no = "$enable_libtool_lock" || enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -7215,24 +7303,25 @@ test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) - HPUX_IA64_MODE="32" + HPUX_IA64_MODE=32 ;; *ELF-64*) - HPUX_IA64_MODE="64" + HPUX_IA64_MODE=64 ;; esac fi rm -rf conftest* ;; *-*-irix6*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" @@ -7261,9 +7350,50 @@ rm -rf conftest* ;; +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -7286,10 +7416,10 @@ ;; esac ;; - powerpc64le-*) + powerpc64le-*linux*) LD="${LD-ld} -m elf32lppclinux" ;; - powerpc64-*) + powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) @@ -7308,10 +7438,10 @@ x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; - powerpcle-*) + powerpcle-*linux*) LD="${LD-ld} -m elf64lppc" ;; - powerpc-*) + powerpc-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) @@ -7329,7 +7459,7 @@ *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" + SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } @@ -7369,13 +7499,14 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then + if test yes != "$lt_cv_cc_needs_belf"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" + CFLAGS=$SAVE_CFLAGS fi ;; *-*solaris*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -7387,7 +7518,7 @@ case $lt_cv_prog_gnu_ld in yes*) case $host in - i?86-*-solaris*) + i?86-*-solaris*|x86_64-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) @@ -7396,7 +7527,7 @@ esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD="${LD-ld}_sol2" + LD=${LD-ld}_sol2 fi ;; *) @@ -7412,7 +7543,7 @@ ;; esac -need_locks="$enable_libtool_lock" +need_locks=$enable_libtool_lock if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. @@ -7523,7 +7654,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test "x$lt_cv_path_mainfest_tool" != xyes; then +if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi @@ -8026,7 +8157,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then + if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the @@ -8044,7 +8175,7 @@ cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. - elif test -f libconftest.dylib && test $_lt_result -eq 0; then + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 @@ -8083,7 +8214,7 @@ fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 @@ -8112,7 +8243,7 @@ _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 - elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then lt_cv_ld_force_load=yes else cat conftest.err >&5 @@ -8125,32 +8256,32 @@ $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[012][,.]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then + if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= @@ -8158,6 +8289,41 @@ ;; esac +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -8452,14 +8618,14 @@ *) enable_static=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_static=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8490,14 +8656,14 @@ *) enable_shared=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_shared=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8522,14 +8688,14 @@ *) pic_mode=default # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for lt_pkg in $withval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8537,8 +8703,6 @@ fi -test -z "$pic_mode" && pic_mode=default - @@ -8554,14 +8718,14 @@ *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8575,11 +8739,63 @@ + shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[5-9]*,yes) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 +$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } + +# Check whether --with-aix-soname was given. +if test "${with_aix_soname+set}" = set; then : + withval=$with_aix_soname; case $withval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else + if ${lt_cv_with_aix_soname+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_with_aix_soname=aix +fi + + with_aix_soname=$lt_cv_with_aix_soname +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 +$as_echo "$with_aix_soname" >&6; } + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + + + + + + + # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" +LIBTOOL_DEPS=$ltmain # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' @@ -8628,7 +8844,7 @@ -if test -n "${ZSH_VERSION+set}" ; then +if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi @@ -8667,7 +8883,7 @@ # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then + if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -8678,14 +8894,14 @@ ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except MSVC, +# All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a -with_gnu_ld="$lt_cv_prog_gnu_ld" +with_gnu_ld=$lt_cv_prog_gnu_ld -old_CC="$CC" -old_CFLAGS="$CFLAGS" +old_CC=$CC +old_CFLAGS=$CFLAGS # Set sane defaults for various variables test -z "$CC" && CC=cc @@ -8694,15 +8910,8 @@ test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +func_cc_basename $compiler +cc_basename=$func_cc_basename_result # Only perform the check for file, if the check method requires it @@ -8717,22 +8926,22 @@ else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -f "$ac_dir/${ac_tool_prefix}file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : @@ -8755,13 +8964,13 @@ break fi done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } @@ -8783,22 +8992,22 @@ else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -f "$ac_dir/file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : @@ -8821,13 +9030,13 @@ break fi done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } @@ -8848,7 +9057,7 @@ # Use C for the default configuration in the libtool script -lt_save_CC="$CC" +lt_save_CC=$CC ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -8910,7 +9119,7 @@ lt_prog_compiler_no_builtin_flag= -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; @@ -8926,7 +9135,7 @@ lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" + lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -8956,7 +9165,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : @@ -8974,17 +9183,18 @@ lt_prog_compiler_static= - if test "$GCC" = yes; then + if test yes = "$GCC"; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi + lt_prog_compiler_pic='-fPIC' ;; amigaos*) @@ -8995,8 +9205,8 @@ ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac @@ -9012,6 +9222,11 @@ # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac ;; darwin* | rhapsody*) @@ -9082,7 +9297,7 @@ case $host_os in aix*) lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else @@ -9090,10 +9305,29 @@ fi ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac ;; hpux9* | hpux10* | hpux11*) @@ -9109,7 +9343,7 @@ ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' + lt_prog_compiler_static='$wl-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) @@ -9120,7 +9354,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. + # old Intel for x86_64, which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' @@ -9145,6 +9379,12 @@ lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) @@ -9242,7 +9482,7 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi @@ -9271,7 +9511,7 @@ fi case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: + # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; @@ -9303,7 +9543,7 @@ lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -9333,7 +9573,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then +if test yes = "$lt_cv_prog_compiler_pic_works"; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; @@ -9365,7 +9605,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -9384,13 +9624,13 @@ fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } -if test x"$lt_cv_prog_compiler_static_works" = xyes; then +if test yes = "$lt_cv_prog_compiler_static_works"; then : else lt_prog_compiler_static= @@ -9510,8 +9750,8 @@ -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } @@ -9523,9 +9763,9 @@ ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} need_locks=warn fi else @@ -9568,9 +9808,9 @@ # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if @@ -9585,7 +9825,7 @@ # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. - if test "$GCC" != yes; then + if test yes != "$GCC"; then with_gnu_ld=no fi ;; @@ -9593,7 +9833,7 @@ # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; - openbsd*) + openbsd* | bitrig*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) @@ -9606,7 +9846,7 @@ # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility @@ -9628,24 +9868,24 @@ esac fi - if test "$lt_use_gnu_ld_interface" = yes; then + if test yes = "$lt_use_gnu_ld_interface"; then # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' + wlarc='$wl' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='$wl--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no - case `$LD -v 2>&1` in + case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... @@ -9658,7 +9898,7 @@ case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then + if test ia64 != "$host_cpu"; then ld_shlibs=no cat <<_LT_EOF 1>&2 @@ -9677,7 +9917,7 @@ case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) @@ -9693,7 +9933,7 @@ allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else ld_shlibs=no fi @@ -9703,7 +9943,7 @@ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' + export_dynamic_flag_spec='$wl--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes @@ -9711,61 +9951,89 @@ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' link_all_deplibs=yes ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no - if test "$host_os" = linux-dietlibc; then + if test linux-dietlibc = "$host_os"; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no + && test no = "$tmp_diet" then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -9776,42 +10044,47 @@ lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in + tcc*) + export_dynamic_flag_spec='-rdynamic' + ;; xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -9825,8 +10098,8 @@ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -9844,8 +10117,8 @@ _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -9857,7 +10130,7 @@ ld_shlibs=no cat <<_LT_EOF 1>&2 -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify @@ -9872,9 +10145,9 @@ # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -9891,15 +10164,15 @@ *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac - if test "$ld_shlibs" = no; then + if test no = "$ld_shlibs"; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= @@ -9915,7 +10188,7 @@ # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported @@ -9923,34 +10196,57 @@ ;; aix[4-9]*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' - no_entry_flag="" + no_entry_flag= else # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then aix_use_runtimelinking=yes break fi done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi ;; esac @@ -9969,13 +10265,21 @@ hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes - file_list_spec='${wl}-f,' + file_list_spec='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct=no + hardcode_direct_absolute=no + ;; + esac - if test "$GCC" = yes; then + if test yes = "$GCC"; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` + collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then @@ -9994,36 +10298,42 @@ ;; esac shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' fi - link_all_deplibs=no + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' else # not using gcc - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' else - shared_flag='${wl}-bM:SRE' + shared_flag='$wl-bM:SRE' fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' fi fi - export_dynamic_flag_spec='${wl}-bexpall' + export_dynamic_flag_spec='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : @@ -10058,7 +10368,7 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" + lt_cv_aix_libpath_=/usr/lib:/lib fi fi @@ -10066,17 +10376,17 @@ aix_libpath=$lt_cv_aix_libpath_ fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : @@ -10111,7 +10421,7 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" + lt_cv_aix_libpath_=/usr/lib:/lib fi fi @@ -10119,21 +10429,33 @@ aix_libpath=$lt_cv_aix_libpath_ fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then + no_undefined_flag=' $wl-bernotok' + allow_undefined_flag=' $wl-berok' + if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' fi fi ;; @@ -10142,7 +10464,7 @@ case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) @@ -10172,16 +10494,17 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes @@ -10190,18 +10513,18 @@ # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' ;; *) # Assume MSVC wrapper @@ -10210,7 +10533,7 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. @@ -10229,24 +10552,24 @@ hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" + allow_undefined_flag=$_lt_dar_allow_undefined case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; + ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac - if test "$_lt_dar_can_shared" = "yes"; then + if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" else ld_shlibs=no @@ -10288,33 +10611,33 @@ ;; hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + if test yes = "$GCC"; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test yes,no = "$GCC,$with_gnu_ld"; then + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes @@ -10322,25 +10645,25 @@ ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test yes,no = "$GCC,$with_gnu_ld"; then case $host_cpu in hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) @@ -10352,7 +10675,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -10371,14 +10694,14 @@ fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +if test yes = "$lt_cv_prog_compiler__b"; then + archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi @@ -10386,8 +10709,8 @@ ;; esac fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: case $host_cpu in @@ -10398,7 +10721,7 @@ *) hardcode_direct=yes hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. @@ -10409,8 +10732,8 @@ ;; irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. @@ -10420,8 +10743,8 @@ if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } @@ -10433,24 +10756,35 @@ fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + if test yes = "$lt_cv_irix_exported_symbol"; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi + link_all_deplibs=no else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + ld_shlibs=yes + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out @@ -10465,7 +10799,7 @@ newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; @@ -10473,27 +10807,19 @@ *nto* | *qnx*) ;; - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' fi else ld_shlibs=no @@ -10504,33 +10830,53 @@ hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes ;; osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' fi archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' @@ -10541,24 +10887,24 @@ solaris*) no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + wlarc='$wl' + archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + wlarc='$wl' + archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi @@ -10568,11 +10914,11 @@ solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', + # but understands '-z linker_flag'. GCC discards it without '$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + if test yes = "$GCC"; then + whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi @@ -10582,10 +10928,10 @@ ;; sunos4*) - if test "x$host_vendor" = xsequent; then + if test sequent = "$host_vendor"; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -10634,43 +10980,43 @@ ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' + no_undefined_flag='$wl-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not + # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' + no_undefined_flag='$wl-z,text' + allow_undefined_flag='$wl-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_flag_spec='$wl-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' + export_dynamic_flag_spec='$wl-Bexport' runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; @@ -10685,10 +11031,10 @@ ;; esac - if test x$host_vendor = xsni; then + if test sni = "$host_vendor"; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' + export_dynamic_flag_spec='$wl-Blargedynsym' ;; esac fi @@ -10696,7 +11042,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no +test no = "$ld_shlibs" && can_build_shared=no with_gnu_ld=$with_gnu_ld @@ -10722,7 +11068,7 @@ # Assume -lc should be added archive_cmds_need_lc=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then + if test yes,yes = "$GCC,$enable_shared"; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. @@ -10937,14 +11283,14 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; + mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in @@ -10960,28 +11306,35 @@ ;; esac # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. + # and add multilib dir if necessary... lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; + lt_foo = "/" $lt_i lt_foo; } else { lt_count--; } @@ -10995,7 +11348,7 @@ # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; + $SED 's|/\([A-Za-z]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else @@ -11004,7 +11357,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext_cmds=".so" +shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -11021,14 +11374,16 @@ # flags to be left without arguments need_version=unknown + + case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' + soname_spec='$libname$release$shared_ext$major' ;; aix[4-9]*) @@ -11036,41 +11391,91 @@ need_lib_prefix=no need_version=no hardcode_into_libs=yes - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac shlibpath_var=LIBPATH fi ;; @@ -11080,18 +11485,18 @@ powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) - library_names_spec='${libname}${shared_ext}' + library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; @@ -11099,8 +11504,8 @@ bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" @@ -11112,7 +11517,7 @@ cygwin* | mingw* | pw32* | cegcc*) version_type=windows - shrext_cmds=".dll" + shrext_cmds=.dll need_version=no need_lib_prefix=no @@ -11121,8 +11526,8 @@ # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ @@ -11138,17 +11543,17 @@ case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' @@ -11157,8 +11562,8 @@ *,cl*) # Native MSVC libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' case $build_os in mingw*) @@ -11185,7 +11590,7 @@ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` @@ -11198,8 +11603,8 @@ esac # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' @@ -11212,7 +11617,7 @@ *) # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac @@ -11225,8 +11630,8 @@ version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' @@ -11239,8 +11644,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -11258,12 +11663,13 @@ version_type=freebsd-$objformat case $version_type in freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac @@ -11293,10 +11699,10 @@ need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -11314,14 +11720,15 @@ dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' @@ -11329,8 +11736,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; @@ -11339,8 +11746,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... @@ -11353,8 +11760,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -11365,7 +11772,7 @@ case $host_os in nonstopux*) version_type=nonstopux ;; *) - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix @@ -11373,8 +11780,8 @@ esac need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= @@ -11393,8 +11800,8 @@ esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; @@ -11403,13 +11810,33 @@ dynamic_linker=no ;; +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' + ;; + # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -11453,7 +11880,12 @@ # before this can be enabled. hardcode_into_libs=yes - # Append ld.so.conf contents to the search path + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" @@ -11485,12 +11917,12 @@ need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH @@ -11500,7 +11932,7 @@ newsos6) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; @@ -11509,58 +11941,68 @@ version_type=qnx need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; -openbsd*) +openbsd* | bitrig*) version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" + sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no else - shlibpath_overrides_runpath=yes + need_version=yes fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' - shrext_cmds=".dll" + version_type=windows + shrext_cmds=.dll + need_version=no need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) @@ -11571,8 +12013,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes @@ -11582,11 +12024,11 @@ sunos4*) version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes @@ -11594,8 +12036,8 @@ sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) @@ -11616,24 +12058,24 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf + version_type=sco need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' @@ -11651,7 +12093,7 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes @@ -11659,8 +12101,8 @@ uts4*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -11670,20 +12112,35 @@ esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no +test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then +if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + + + + @@ -11780,15 +12237,15 @@ hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then + test yes = "$hardcode_automatic"; then # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && + if test no != "$hardcode_direct" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && + test no != "$hardcode_minus_L"; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else @@ -11803,12 +12260,12 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then +if test relink = "$hardcode_action" || + test yes = "$inherit_rpath"; then # Fast installation is not supported enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi @@ -11818,7 +12275,7 @@ - if test "x$enable_dlopen" != xyes; then + if test yes != "$enable_dlopen"; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown @@ -11828,23 +12285,23 @@ case $host_os in beos*) - lt_cv_dlopen="load_add_on" + lt_cv_dlopen=load_add_on lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; cygwin*) - lt_cv_dlopen="dlopen" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs= ;; darwin*) - # if libdl is installed we need to link against it + # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : @@ -11882,10 +12339,10 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else - lt_cv_dlopen="dyld" + lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes @@ -11893,10 +12350,18 @@ ;; + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" + lt_cv_dlopen=shl_load else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } @@ -11935,11 +12400,11 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" + lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" + lt_cv_dlopen=dlopen else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } @@ -11978,7 +12443,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } @@ -12017,7 +12482,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } @@ -12056,7 +12521,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" + lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld fi @@ -12077,21 +12542,21 @@ ;; esac - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else + if test no = "$lt_cv_dlopen"; then enable_dlopen=no + else + enable_dlopen=yes fi case $lt_cv_dlopen in dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - save_LIBS="$LIBS" + save_LIBS=$LIBS LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 @@ -12099,7 +12564,7 @@ if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then : + if test yes = "$cross_compiling"; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -12146,9 +12611,9 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated +/* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif @@ -12178,7 +12643,7 @@ (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -12198,14 +12663,14 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } - if test "x$lt_cv_dlopen_self" = xyes; then + if test yes = "$lt_cv_dlopen_self"; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then : + if test yes = "$cross_compiling"; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -12252,9 +12717,9 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated +/* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif @@ -12284,7 +12749,7 @@ (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -12305,9 +12770,9 @@ $as_echo "$lt_cv_dlopen_self_static" >&6; } fi - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS ;; esac @@ -12351,7 +12816,7 @@ # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) - if test -n "$STRIP" ; then + if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 @@ -12379,7 +12844,7 @@ - # Report which library types will actually be built + # Report what library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 @@ -12387,13 +12852,13 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no + test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) - test "$enable_shared" = yes && enable_static=no + test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' @@ -12401,8 +12866,12 @@ ;; aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac fi ;; esac @@ -12412,7 +12881,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes + test yes = "$enable_shared" || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } @@ -12426,7 +12895,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC="$lt_save_CC" +CC=$lt_save_CC @@ -12454,7 +12923,7 @@ # For information on how to properly maintain the library version information, # refer to the libtool manual, section "Updating library version information": # http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html -PARLATYPE_SO_VERSION=1:4:0 +PARLATYPE_SO_VERSION=1:6:0 # Parlatype is unstable, we don't use API version yet @@ -13577,15 +14046,15 @@ func_stripname_cnf () { - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + case $2 in + .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;; + *) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;; esac } # func_stripname_cnf - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then + if test -n "$CXX" && ( test no != "$CXX" && + ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || + (test g++ != "$CXX"))); then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -13764,7 +14233,7 @@ # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then +if test yes != "$_lt_caught_CXX_error"; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" @@ -13825,46 +14294,39 @@ CFLAGS=$CXXFLAGS compiler=$CC compiler_CXX=$CC - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + func_cc_basename $compiler +cc_basename=$func_cc_basename_result if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately - if test "$GXX" = yes; then + if test yes = "$GXX"; then lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' else lt_prog_compiler_no_builtin_flag_CXX= fi - if test "$GXX" = yes; then + if test yes = "$GXX"; then # Set up default GNU C++ configuration # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld -if test "$GCC" = yes; then +if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw + # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; @@ -13878,7 +14340,7 @@ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done - test -z "$LD" && LD="$ac_prog" + test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. @@ -13889,7 +14351,7 @@ with_gnu_ld=unknown ;; esac -elif test "$with_gnu_ld" = yes; then +elif test yes = "$with_gnu_ld"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else @@ -13900,32 +14362,32 @@ $as_echo_n "(cached) " >&6 else if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } @@ -13961,22 +14423,22 @@ # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + if test yes = "$with_gnu_ld"; then + archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir' + export_dynamic_flag_spec_CXX='$wl--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) - wlarc='${wl}' + wlarc='$wl' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else whole_archive_flag_spec_CXX= fi @@ -14013,18 +14475,30 @@ ld_shlibs_CXX=no ;; aix[4-9]*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' - no_entry_flag="" + no_entry_flag= else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do case $ld_flag in @@ -14034,6 +14508,13 @@ ;; esac done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi ;; esac @@ -14052,13 +14533,21 @@ hardcode_direct_absolute_CXX=yes hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes - file_list_spec_CXX='${wl}-f,' + file_list_spec_CXX='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct_CXX=no + hardcode_direct_absolute_CXX=no + ;; + esac - if test "$GXX" = yes; then + if test yes = "$GXX"; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` + collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then @@ -14076,36 +14565,44 @@ fi esac shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag=$shared_flag' $wl-G' fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' else # not using gcc - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' else - shared_flag='${wl}-bM:SRE' + shared_flag='$wl-bM:SRE' fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' fi fi - export_dynamic_flag_spec_CXX='${wl}-bexpall' + export_dynamic_flag_spec_CXX='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. always_export_symbols_CXX=yes - if test "$aix_use_runtimelinking" = yes; then + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. - allow_undefined_flag_CXX='-berok' + # The "-G" linker flag allows undefined symbols. + no_undefined_flag_CXX='-bernotok' # Determine the default libpath from the value encoded in an empty # executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath__CXX+:} false; then : @@ -14140,7 +14637,7 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX="/usr/lib:/lib" + lt_cv_aix_libpath__CXX=/usr/lib:/lib fi fi @@ -14148,18 +14645,18 @@ aix_libpath=$lt_cv_aix_libpath__CXX fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec_CXX='$wl-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath__CXX+:} false; then : @@ -14194,7 +14691,7 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX="/usr/lib:/lib" + lt_cv_aix_libpath__CXX=/usr/lib:/lib fi fi @@ -14202,22 +14699,34 @@ aix_libpath=$lt_cv_aix_libpath__CXX fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - no_undefined_flag_CXX=' ${wl}-bernotok' - allow_undefined_flag_CXX=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then + no_undefined_flag_CXX=' $wl-bernotok' + allow_undefined_flag_CXX=' $wl-berok' + if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_CXX='$convenience' fi archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + archive_expsym_cmds_CXX='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared + # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. + archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$RM -r $output_objdir/$realname.d' fi fi ;; @@ -14227,7 +14736,7 @@ allow_undefined_flag_CXX=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else ld_shlibs_CXX=no fi @@ -14255,57 +14764,58 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' + archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds_CXX='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' enable_shared_with_static_runtimes_CXX=yes # Don't use ranlib old_postinstall_cmds_CXX='chmod 644 $oldlib' postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_CXX='-L$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' + export_dynamic_flag_spec_CXX='$wl--export-all-symbols' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=no enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds_CXX='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_CXX=no fi @@ -14319,27 +14829,27 @@ hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec_CXX='' fi link_all_deplibs_CXX=yes - allow_undefined_flag_CXX="$_lt_dar_allow_undefined" + allow_undefined_flag_CXX=$_lt_dar_allow_undefined case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; + ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac - if test "$_lt_dar_can_shared" = "yes"; then + if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all - archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - if test "$lt_cv_apple_cc_single_mod" != "yes"; then - archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds_CXX="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + if test yes != "$lt_cv_apple_cc_single_mod"; then + archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" + archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" fi else @@ -14348,6 +14858,34 @@ ;; + os2*) + hardcode_libdir_flag_spec_CXX='-L$libdir' + hardcode_minus_L_CXX=yes + allow_undefined_flag_CXX=unsupported + shrext_cmds=.dll + archive_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes_CXX=yes + ;; + dgux*) case $cc_basename in ec++*) @@ -14383,14 +14921,14 @@ ;; haiku*) - archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' link_all_deplibs_CXX=yes ;; hpux9*) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir' hardcode_libdir_separator_CXX=: - export_dynamic_flag_spec_CXX='${wl}-E' + export_dynamic_flag_spec_CXX='$wl-E' hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default @@ -14402,7 +14940,7 @@ ld_shlibs_CXX=no ;; aCC*) - archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -14411,11 +14949,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes; then - archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + if test yes = "$GXX"; then + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -14425,15 +14963,15 @@ ;; hpux10*|hpux11*) - if test $with_gnu_ld = no; then - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir' hardcode_libdir_separator_CXX=: case $host_cpu in hppa*64*|ia64*) ;; *) - export_dynamic_flag_spec_CXX='${wl}-E' + export_dynamic_flag_spec_CXX='$wl-E' ;; esac fi @@ -14459,13 +14997,13 @@ aCC*) case $host_cpu in hppa*64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists @@ -14476,20 +15014,20 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then case $host_cpu in hppa*64*) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -14504,22 +15042,22 @@ interix[3-9]*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}-E' + hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir' + export_dynamic_flag_spec_CXX='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_CXX='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -14528,17 +15066,17 @@ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' fi fi link_all_deplibs_CXX=yes ;; esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir' hardcode_libdir_separator_CXX=: inherit_rpath_CXX=yes ;; @@ -14551,8 +15089,8 @@ # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -14561,10 +15099,10 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir' + export_dynamic_flag_spec_CXX='$wl--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. @@ -14578,59 +15116,59 @@ # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac - archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac archive_cmds_need_lc_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir' + export_dynamic_flag_spec_CXX='$wl--export-dynamic' + whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [1-5].* | *pgcpp\ [1-5].*) prelink_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' old_archive_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' archive_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + hardcode_libdir_flag_spec_CXX='$wl--rpath $wl$libdir' + export_dynamic_flag_spec_CXX='$wl--export-dynamic' + whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' ;; cxx*) # Compaq C++ - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_CXX='-rpath $libdir' @@ -14644,18 +15182,18 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir' + export_dynamic_flag_spec_CXX='$wl--export-dynamic' + archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + if test yes = "$supports_anon_versioning"; then archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi ;; *) @@ -14663,10 +15201,10 @@ *Sun\ C*) # Sun C++ 5.9 no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' - whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object_CXX=yes # Not sure whether something based on @@ -14724,22 +15262,17 @@ ld_shlibs_CXX=yes ;; - openbsd2*) - # C++ shared libraries are fairly broken - ld_shlibs_CXX=no - ;; - - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no hardcode_direct_absolute_CXX=yes archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - export_dynamic_flag_spec_CXX='${wl}-E' - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' + export_dynamic_flag_spec_CXX='$wl-E' + whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else @@ -14755,9 +15288,9 @@ # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using @@ -14775,17 +15308,17 @@ cxx*) case $host in osf3*) - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*' + archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir' ;; *) allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ + $RM $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' ;; esac @@ -14800,21 +15333,21 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + if test yes,no = "$GXX,$with_gnu_ld"; then + allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*' case $host in osf3*) - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; *) - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists @@ -14860,9 +15393,9 @@ # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no @@ -14870,7 +15403,7 @@ solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. + # but understands '-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' ;; @@ -14887,30 +15420,30 @@ ;; gcx*) # Green Hills C++ Compiler - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - no_undefined_flag_CXX=' ${wl}-z ${wl}defs' + if test yes,no = "$GXX,$with_gnu_ld"; then + no_undefined_flag_CXX=' $wl-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else - # g++ 2.7 appears to require `-G' NOT `-shared' on this + # g++ 2.7 appears to require '-G' NOT '-shared' on this # platform. - archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -14918,11 +15451,11 @@ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi - hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' + hardcode_libdir_flag_spec_CXX='$wl-R $wl$libdir' case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) - whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + whole_archive_flag_spec_CXX='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' ;; esac fi @@ -14931,52 +15464,52 @@ ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_CXX='${wl}-z,text' + no_undefined_flag_CXX='$wl-z,text' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) - archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not + # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - no_undefined_flag_CXX='${wl}-z,text' - allow_undefined_flag_CXX='${wl}-z,nodefs' + no_undefined_flag_CXX='$wl-z,text' + allow_undefined_flag_CXX='$wl-z,nodefs' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' + hardcode_libdir_flag_spec_CXX='$wl-R,$libdir' hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes - export_dynamic_flag_spec_CXX='${wl}-Bexport' + export_dynamic_flag_spec_CXX='$wl-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) - archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ - '"$old_archive_cmds_CXX" + '"$old_archive_cmds_CXX" reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ - '"$reload_cmds_CXX" + '"$reload_cmds_CXX" ;; *) - archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; @@ -15008,10 +15541,10 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } - test "$ld_shlibs_CXX" = no && can_build_shared=no + test no = "$ld_shlibs_CXX" && can_build_shared=no - GCC_CXX="$GXX" - LD_CXX="$LD" + GCC_CXX=$GXX + LD_CXX=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change @@ -15055,13 +15588,13 @@ pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in + case $prev$p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. - if test $p = "-L" || - test $p = "-R"; then + if test x-L = "$p" || + test x-R = "$p"; then prev=$p continue fi @@ -15077,16 +15610,16 @@ case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac - if test "$pre_test_object_deps_done" = no; then - case ${prev} in + if test no = "$pre_test_object_deps_done"; then + case $prev in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$compiler_lib_search_path_CXX"; then - compiler_lib_search_path_CXX="${prev}${p}" + compiler_lib_search_path_CXX=$prev$p else - compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" + compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} $prev$p" fi ;; # The "-l" case would never come before the object being @@ -15094,9 +15627,9 @@ esac else if test -z "$postdeps_CXX"; then - postdeps_CXX="${prev}${p}" + postdeps_CXX=$prev$p else - postdeps_CXX="${postdeps_CXX} ${prev}${p}" + postdeps_CXX="${postdeps_CXX} $prev$p" fi fi prev= @@ -15111,15 +15644,15 @@ continue fi - if test "$pre_test_object_deps_done" = no; then + if test no = "$pre_test_object_deps_done"; then if test -z "$predep_objects_CXX"; then - predep_objects_CXX="$p" + predep_objects_CXX=$p else predep_objects_CXX="$predep_objects_CXX $p" fi else if test -z "$postdep_objects_CXX"; then - postdep_objects_CXX="$p" + postdep_objects_CXX=$p else postdep_objects_CXX="$postdep_objects_CXX $p" fi @@ -15149,51 +15682,6 @@ postdep_objects_CXX= postdeps_CXX= ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - postdeps_CXX='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC* | sunCC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - postdeps_CXX='-library=Cstd -library=Crun' - fi - ;; - esac - ;; esac @@ -15202,7 +15690,7 @@ esac compiler_lib_search_dirs_CXX= if test -n "${compiler_lib_search_path_CXX}"; then - compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` + compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'` fi @@ -15241,17 +15729,18 @@ # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then + if test yes = "$GXX"; then lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-static' case $host_os in aix*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' fi + lt_prog_compiler_pic_CXX='-fPIC' ;; amigaos*) @@ -15262,8 +15751,8 @@ ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ;; esac @@ -15278,6 +15767,11 @@ # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static_CXX='$wl-static' + ;; + esac ;; darwin* | rhapsody*) # PIC is the default on this platform @@ -15327,7 +15821,7 @@ case $host_os in aix[4-9]*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' else @@ -15367,14 +15861,14 @@ case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then + lt_prog_compiler_static_CXX='$wl-a ${wl}archive' + if test ia64 != "$host_cpu"; then lt_prog_compiler_pic_CXX='+Z' fi ;; aCC*) lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + lt_prog_compiler_static_CXX='$wl-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default @@ -15411,7 +15905,7 @@ lt_prog_compiler_pic_CXX='-fPIC' ;; ecpc* ) - # old Intel C++ for x86_64 which still supported -KPIC. + # old Intel C++ for x86_64, which still supported -KPIC. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-static' @@ -15556,7 +16050,7 @@ fi case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: + # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= ;; @@ -15588,7 +16082,7 @@ lt_cv_prog_compiler_pic_works_CXX=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -15618,7 +16112,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } -if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then +if test yes = "$lt_cv_prog_compiler_pic_works_CXX"; then case $lt_prog_compiler_pic_CXX in "" | " "*) ;; *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; @@ -15644,7 +16138,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works_CXX=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -15663,13 +16157,13 @@ fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } -if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then +if test yes = "$lt_cv_prog_compiler_static_works_CXX"; then : else lt_prog_compiler_static_CXX= @@ -15783,8 +16277,8 @@ -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o_CXX" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } @@ -15796,9 +16290,9 @@ ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} need_locks=warn fi else @@ -15815,17 +16309,21 @@ case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi ;; pw32*) - export_symbols_cmds_CXX="$ltdll_cmds" + export_symbols_cmds_CXX=$ltdll_cmds ;; cygwin* | mingw* | cegcc*) case $cc_basename in @@ -15848,7 +16346,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } -test "$ld_shlibs_CXX" = no && can_build_shared=no +test no = "$ld_shlibs_CXX" && can_build_shared=no with_gnu_ld_CXX=$with_gnu_ld @@ -15865,7 +16363,7 @@ # Assume -lc should be added archive_cmds_need_lc_CXX=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then + if test yes,yes = "$GCC,$enable_shared"; then case $archive_cmds_CXX in *'~'*) # FIXME: we may have to deal with multi-command sequences. @@ -15993,7 +16491,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext_cmds=".so" +shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -16010,14 +16508,16 @@ # flags to be left without arguments need_version=unknown + + case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' + soname_spec='$libname$release$shared_ext$major' ;; aix[4-9]*) @@ -16025,41 +16525,91 @@ need_lib_prefix=no need_version=no hardcode_into_libs=yes - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac shlibpath_var=LIBPATH fi ;; @@ -16069,18 +16619,18 @@ powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) - library_names_spec='${libname}${shared_ext}' + library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; @@ -16088,8 +16638,8 @@ bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" @@ -16101,7 +16651,7 @@ cygwin* | mingw* | pw32* | cegcc*) version_type=windows - shrext_cmds=".dll" + shrext_cmds=.dll need_version=no need_lib_prefix=no @@ -16110,8 +16660,8 @@ # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ @@ -16127,16 +16677,16 @@ case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' @@ -16145,8 +16695,8 @@ *,cl*) # Native MSVC libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' case $build_os in mingw*) @@ -16173,7 +16723,7 @@ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` @@ -16186,8 +16736,8 @@ esac # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' @@ -16200,7 +16750,7 @@ *) # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac @@ -16213,8 +16763,8 @@ version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' @@ -16226,8 +16776,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -16245,12 +16795,13 @@ version_type=freebsd-$objformat case $version_type in freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac @@ -16280,10 +16831,10 @@ need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -16301,14 +16852,15 @@ dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' @@ -16316,8 +16868,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; @@ -16326,8 +16878,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... @@ -16340,8 +16892,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -16352,7 +16904,7 @@ case $host_os in nonstopux*) version_type=nonstopux ;; *) - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix @@ -16360,8 +16912,8 @@ esac need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= @@ -16380,8 +16932,8 @@ esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; @@ -16390,13 +16942,33 @@ dynamic_linker=no ;; +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec_CXX='-L$libdir' + ;; + # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -16440,7 +17012,12 @@ # before this can be enabled. hardcode_into_libs=yes - # Append ld.so.conf contents to the search path + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" @@ -16472,12 +17049,12 @@ need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH @@ -16487,7 +17064,7 @@ newsos6) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; @@ -16496,58 +17073,68 @@ version_type=qnx need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; -openbsd*) +openbsd* | bitrig*) version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" + sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no else - shlibpath_overrides_runpath=yes + need_version=yes fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' - shrext_cmds=".dll" + version_type=windows + shrext_cmds=.dll + need_version=no need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) @@ -16558,8 +17145,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes @@ -16569,11 +17156,11 @@ sunos4*) version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes @@ -16581,8 +17168,8 @@ sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) @@ -16603,24 +17190,24 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf + version_type=sco need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' @@ -16638,7 +17225,7 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes @@ -16646,8 +17233,8 @@ uts4*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -16657,20 +17244,32 @@ esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no +test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then +if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + @@ -16713,15 +17312,15 @@ hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || test -n "$runpath_var_CXX" || - test "X$hardcode_automatic_CXX" = "Xyes" ; then + test yes = "$hardcode_automatic_CXX"; then # We can hardcode non-existent directories. - if test "$hardcode_direct_CXX" != no && + if test no != "$hardcode_direct_CXX" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && - test "$hardcode_minus_L_CXX" != no; then + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" && + test no != "$hardcode_minus_L_CXX"; then # Linking always hardcodes the temporary library directory. hardcode_action_CXX=relink else @@ -16736,12 +17335,12 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 $as_echo "$hardcode_action_CXX" >&6; } -if test "$hardcode_action_CXX" = relink || - test "$inherit_rpath_CXX" = yes; then +if test relink = "$hardcode_action_CXX" || + test yes = "$inherit_rpath_CXX"; then # Fast installation is not supported enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi @@ -16764,7 +17363,7 @@ lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes +fi # test yes != "$_lt_caught_CXX_error" ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -16815,6 +17414,62 @@ fi done +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing ceil" >&5 +$as_echo_n "checking for library containing ceil... " >&6; } +if ${ac_cv_search_ceil+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char ceil (); +int +main () +{ +return ceil (); + ; + return 0; +} +_ACEOF +for ac_lib in '' m; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_ceil=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_ceil+:} false; then : + break +fi +done +if ${ac_cv_search_ceil+:} false; then : + +else + ac_cv_search_ceil=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_ceil" >&5 +$as_echo "$ac_cv_search_ceil" >&6; } +ac_res=$ac_cv_search_ceil +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +fi + @@ -18835,6 +19490,10 @@ am__EXEEXT_FALSE= fi + + ac_config_commands="$ac_config_commands po/stamp-it" + + if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 @@ -18843,10 +19502,6 @@ as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi - - ac_config_commands="$ac_config_commands po/stamp-it" - - if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 @@ -19304,7 +19959,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by libparlatype $as_me 1.5.4, which was +This file was extended by libparlatype $as_me 1.5.6, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -19370,7 +20025,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -libparlatype config.status 1.5.4 +libparlatype config.status 1.5.6 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" @@ -19505,6 +20160,7 @@ enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' @@ -19554,10 +20210,13 @@ GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' @@ -19622,7 +20281,8 @@ finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' +configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' @@ -19727,9 +20387,12 @@ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_import \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +lt_cv_nm_interface \ nm_file_list_spec \ +lt_cv_truncate_bin \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ @@ -19795,7 +20458,7 @@ compiler_lib_search_path_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -19822,7 +20485,8 @@ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec \ +configure_time_dlsearch_path \ +configure_time_lt_sys_library_path \ reload_cmds_CXX \ old_archive_cmds_CXX \ old_archive_from_new_cmds_CXX \ @@ -19836,7 +20500,7 @@ postlink_cmds_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -19845,19 +20509,16 @@ done ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' -# See if we are running on zsh, and set the options which allow our +# See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then +if test -n "\${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' @@ -20579,55 +21240,52 @@ ;; "libtool":C) - # See if we are running on zsh, and set the options which allow our + # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then + if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi - cfgfile="${ofile}T" + cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# Generated automatically by $as_me ($PACKAGE) $VERSION # NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. # -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with this program. If not, see . # The names of the tagged configurations supported by this script. -available_tags="CXX " +available_tags='CXX ' + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} # ### BEGIN LIBTOOL CONFIG @@ -20647,6 +21305,9 @@ # Whether or not to optimize for fast installation. fast_install=$enable_fast_install +# Shared archive member basename,for filename based shared library versioning on AIX. +shared_archive_member_spec=$shared_archive_member_spec + # Shell to use when invoking shell scripts. SHELL=$lt_SHELL @@ -20764,18 +21425,27 @@ # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +# Transform the output of nm into a list of symbols to manually relocate. +global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import + # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix +# The name lister interface. +nm_interface=$lt_lt_cv_nm_interface + # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec -# The root where to search for dependent libraries,and in which our libraries should be installed. +# The root where to search for dependent libraries,and where our libraries should be installed. lt_sysroot=$lt_sysroot +# Command to truncate a binary pipe. +lt_truncate_bin=$lt_lt_cv_truncate_bin + # The name of the directory that contains temporary libtool files. objdir=$objdir @@ -20866,8 +21536,11 @@ # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +# Detected run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path + +# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. +configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path # Whether dlopen is supported. dlopen_support=$enable_dlopen @@ -20960,13 +21633,13 @@ # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# "absolute",i.e impossible to change by setting \$shlibpath_var if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute @@ -21032,13 +21705,72 @@ _LT_EOF + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then +if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -21047,7 +21779,7 @@ esac -ltmain="$ac_aux_dir/ltmain.sh" +ltmain=$ac_aux_dir/ltmain.sh # We use sed instead of cat because bash on DJGPP gets confused if @@ -21057,165 +21789,6 @@ sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi - - mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" @@ -21302,13 +21875,13 @@ # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct_CXX -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# "absolute",i.e impossible to change by setting \$shlibpath_var if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute_CXX diff -Nru parlatype-1.5.4/libparlatype/configure.ac parlatype-1.5.6/libparlatype/configure.ac --- parlatype-1.5.4/libparlatype/configure.ac 2017-11-19 09:33:19.000000000 +0000 +++ parlatype-1.5.6/libparlatype/configure.ac 2018-08-17 10:33:53.000000000 +0000 @@ -2,7 +2,7 @@ # Process this file with autoconf to produce a configure script. AC_PREREQ([2.69]) -AC_INIT([libparlatype], [1.5.4], [https://github.com/gkarsay/parlatype/issues]) +AC_INIT([libparlatype], [1.5.6], [https://github.com/gkarsay/parlatype/issues]) AC_CONFIG_AUX_DIR([.]) AM_INIT_AUTOMAKE([-Wall -Werror foreign -Wno-portability]) AC_CONFIG_SRCDIR([src/pt-player.c]) @@ -18,7 +18,7 @@ # For information on how to properly maintain the library version information, # refer to the libtool manual, section "Updating library version information": # http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html -AC_SUBST([PARLATYPE_SO_VERSION], [1:4:0]) +AC_SUBST([PARLATYPE_SO_VERSION], [1:6:0]) # Parlatype is unstable, we don't use API version yet AC_SUBST([PARLATYPE_API_VERSION], [1.0]) @@ -37,6 +37,7 @@ # Checks for library functions. AC_CHECK_FUNCS([atexit]) +AC_SEARCH_LIBS([ceil], [m]) GLIB_GSETTINGS AC_PATH_PROG(GLIB_COMPILE_RESOURCES, glib-compile-resources) diff -Nru parlatype-1.5.4/libparlatype/data/icons/Makefile.in parlatype-1.5.6/libparlatype/data/icons/Makefile.in --- parlatype-1.5.4/libparlatype/data/icons/Makefile.in 2017-11-19 15:49:47.000000000 +0000 +++ parlatype-1.5.6/libparlatype/data/icons/Makefile.in 2018-08-17 10:45:35.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -15,7 +15,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -79,7 +89,6 @@ build_triplet = @build@ host_triplet = @host@ subdir = data/icons -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ @@ -90,6 +99,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -148,6 +158,7 @@ check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ check-valgrind-sgcheck-recursive am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -174,7 +185,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ @@ -243,6 +253,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -328,6 +339,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -361,7 +373,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -613,6 +624,8 @@ ps ps-am tags-am uninstall uninstall-am \ uninstall-iconglade16DATA uninstall-iconglade22DATA +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru parlatype-1.5.4/libparlatype/data/Makefile.in parlatype-1.5.6/libparlatype/data/Makefile.in --- parlatype-1.5.4/libparlatype/data/Makefile.in 2017-11-19 15:49:47.000000000 +0000 +++ parlatype-1.5.6/libparlatype/data/Makefile.in 2018-08-17 10:45:35.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -15,7 +15,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -79,8 +89,6 @@ build_triplet = @build@ host_triplet = @host@ subdir = data -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(srcdir)/parlatype.pc.in $(srcdir)/parlatype.xml.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ @@ -91,6 +99,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = parlatype.pc parlatype.xml @@ -184,6 +193,8 @@ ETAGS = etags CTAGS = ctags DIST_SUBDIRS = icons +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/parlatype.pc.in \ + $(srcdir)/parlatype.xml.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -235,7 +246,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ @@ -304,6 +314,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -389,6 +400,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -419,7 +431,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -795,6 +806,8 @@ ps ps-am tags tags-am uninstall uninstall-am \ uninstall-glade_catalogDATA uninstall-pkgconfigDATA +.PRECIOUS: Makefile + @GLADE_CATALOG_TRUE@validate: $(glade_catalog_DATA) @GLADE_CATALOG_TRUE@ xmllint --dtdvalid $(GLADE_CATALOG_DIR)/glade-catalog.dtd --noout $< diff -Nru parlatype-1.5.4/libparlatype/depcomp parlatype-1.5.6/libparlatype/depcomp --- parlatype-1.5.4/libparlatype/depcomp 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/libparlatype/depcomp 2018-04-09 18:22:52.000000000 +0000 @@ -3,7 +3,7 @@ scriptversion=2013-05-30.07; # UTC -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by diff -Nru parlatype-1.5.4/libparlatype/docs/Makefile.in parlatype-1.5.6/libparlatype/docs/Makefile.in --- parlatype-1.5.4/libparlatype/docs/Makefile.in 2017-11-19 15:49:47.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/Makefile.in 2018-08-17 10:45:35.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -14,7 +14,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -78,7 +88,6 @@ build_triplet = @build@ host_triplet = @host@ subdir = docs -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ @@ -89,6 +98,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -152,6 +162,7 @@ ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -203,7 +214,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ @@ -272,6 +282,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -357,6 +368,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -383,7 +395,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign docs/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -708,6 +719,8 @@ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/annotation-glossary.html parlatype-1.5.6/libparlatype/docs/reference/html/annotation-glossary.html --- parlatype-1.5.4/libparlatype/docs/reference/html/annotation-glossary.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/annotation-glossary.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,12 +2,12 @@ -Parlatype Reference Manual: Annotation Glossary - +Annotation Glossary: Parlatype Reference Manual + - + @@ -37,9 +37,13 @@

C

closure

This parameter is a 'user_data', for callbacks; many bindings can pass NULL here.

+
constructor
+

This symbol is a constructor, not a static method.

S

scope async

The callback is valid until first called.

+
skip
+

Exposed in C code, not necessarily available in other languages.

T

transfer full

Free data after the code is done.

@@ -63,7 +67,6 @@

-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/api-index-full.html parlatype-1.5.6/libparlatype/docs/reference/html/api-index-full.html --- parlatype-1.5.4/libparlatype/docs/reference/html/api-index-full.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/api-index-full.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: API Index - +API Index: Parlatype Reference Manual + - + @@ -247,6 +247,14 @@
+PtWaveviewer::zoom-in, object signal in PtWaveviewer +
+
+
+PtWaveviewer::zoom-out, object signal in PtWaveviewer +
+
+
PtWaveviewer:fixed-cursor, object property in PtWaveviewer
@@ -275,6 +283,10 @@
+PtWaveviewer:zoom, object property in PtWaveviewer +
+
+
pt_waveviewer_get_follow_cursor, function in PtWaveviewer
@@ -292,7 +304,6 @@
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/gallery.html parlatype-1.5.6/libparlatype/docs/reference/html/gallery.html --- parlatype-1.5.4/libparlatype/docs/reference/html/gallery.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/gallery.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: Widget gallery - +Widget gallery: Parlatype Reference Manual + - + @@ -36,7 +36,6 @@
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file Binary files /tmp/tmpLTxFFY/pLuCVj8vom/parlatype-1.5.4/libparlatype/docs/reference/html/home.png and /tmp/tmpLTxFFY/ACrcXi3QE1/parlatype-1.5.6/libparlatype/docs/reference/html/home.png differ diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/index.html parlatype-1.5.6/libparlatype/docs/reference/html/index.html --- parlatype-1.5.4/libparlatype/docs/reference/html/index.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/index.html 2018-08-17 10:50:12.000000000 +0000 @@ -3,10 +3,10 @@ Parlatype Reference Manual: Parlatype Reference Manual - + - + @@ -18,7 +18,7 @@ Gabor Karsay

- for parlatype 1.5.4 + for parlatype 1.5.6 .

@@ -61,7 +61,6 @@
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/index.sgml parlatype-1.5.6/libparlatype/docs/reference/html/index.sgml --- parlatype-1.5.4/libparlatype/docs/reference/html/index.sgml 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/index.sgml 1970-01-01 00:00:00.000000000 +0000 @@ -1,133 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/introduction.html parlatype-1.5.6/libparlatype/docs/reference/html/introduction.html --- parlatype-1.5.4/libparlatype/docs/reference/html/introduction.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/introduction.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: Introduction - +Introduction: Parlatype Reference Manual + - + @@ -34,7 +34,6 @@ might change with the next minor release.

-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file Binary files /tmp/tmpLTxFFY/pLuCVj8vom/parlatype-1.5.4/libparlatype/docs/reference/html/left-insensitive.png and /tmp/tmpLTxFFY/ACrcXi3QE1/parlatype-1.5.6/libparlatype/docs/reference/html/left-insensitive.png differ Binary files /tmp/tmpLTxFFY/pLuCVj8vom/parlatype-1.5.4/libparlatype/docs/reference/html/left.png and /tmp/tmpLTxFFY/ACrcXi3QE1/parlatype-1.5.6/libparlatype/docs/reference/html/left.png differ diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/object-tree.html parlatype-1.5.6/libparlatype/docs/reference/html/object-tree.html --- parlatype-1.5.4/libparlatype/docs/reference/html/object-tree.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/object-tree.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: Object Hierarchy - +Object Hierarchy: Parlatype Reference Manual + - + @@ -23,25 +23,24 @@

Object Hierarchy

-    GObject
+    GObject
     ├── PtPlayer
     ├── GInitiallyUnowned
-    │   ╰── GtkWidget
-    │       ╰── GtkContainer
-    │           ╰── GtkBin
-    │               ├── GtkWindow
-    │               │   ╰── GtkDialog
-    │               │       ╰── GtkMessageDialog
+    │   ╰── GtkWidget
+    │       ╰── GtkContainer
+    │           ╰── GtkBin
+    │               ├── GtkWindow
+    │               │   ╰── GtkDialog
+    │               │       ╰── GtkMessageDialog
     │               │           ╰── PtProgressDialog
-    │               ╰── GtkScrolledWindow
+    │               ╰── GtkScrolledWindow
     │                   ╰── PtWaveviewer
     ╰── PtWaveloader
-    GBoxed
+    GBoxed
     ╰── PtWavedata
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/parlatype.devhelp2 parlatype-1.5.6/libparlatype/docs/reference/html/parlatype.devhelp2 --- parlatype-1.5.4/libparlatype/docs/reference/html/parlatype.devhelp2 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/parlatype.devhelp2 2018-08-17 10:50:12.000000000 +0000 @@ -1,5 +1,4 @@ - @@ -75,9 +74,12 @@ + + + @@ -90,5 +92,12 @@ + + + + + + + diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/pt01.html parlatype-1.5.6/libparlatype/docs/reference/html/pt01.html --- parlatype-1.5.4/libparlatype/docs/reference/html/pt01.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/pt01.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: Part I. Overview - +Part I. Overview: Parlatype Reference Manual + - + @@ -32,7 +32,6 @@
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/pt02.html parlatype-1.5.6/libparlatype/docs/reference/html/pt02.html --- parlatype-1.5.4/libparlatype/docs/reference/html/pt02.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/pt02.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: Part II. Main backend: PtPlayer - +Part II. Main backend: PtPlayer: Parlatype Reference Manual + - + @@ -30,7 +30,6 @@
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/pt03.html parlatype-1.5.6/libparlatype/docs/reference/html/pt03.html --- parlatype-1.5.4/libparlatype/docs/reference/html/pt03.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/pt03.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: Part III. GtkWidgets - +Part III. GtkWidgets: Parlatype Reference Manual + - + @@ -36,7 +36,6 @@
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/pt04.html parlatype-1.5.6/libparlatype/docs/reference/html/pt04.html --- parlatype-1.5.4/libparlatype/docs/reference/html/pt04.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/pt04.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: Part IV. Internals: Get Wavedata - +Part IV. Internals: Get Wavedata: Parlatype Reference Manual + - + @@ -35,7 +35,6 @@
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/PtPlayer.html parlatype-1.5.6/libparlatype/docs/reference/html/PtPlayer.html --- parlatype-1.5.4/libparlatype/docs/reference/html/PtPlayer.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/PtPlayer.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: PtPlayer - +PtPlayer: Parlatype Reference Manual + - + @@ -54,7 +54,7 @@

Functions

-
+
@@ -206,7 +206,7 @@
-gint64 +gint64 pt_player_get_position () @@ -214,7 +214,7 @@
-gint64 +gint64 pt_player_get_duration () @@ -297,7 +297,7 @@

Properties

-
+
@@ -319,7 +319,7 @@

Signals

-
+
@@ -329,24 +329,24 @@ - + - + - +
void end-of-streamRun FirstRun First
void errorRun FirstRun First
void load-progressRun FirstRun First

Types and Values

-
+
@@ -365,7 +365,7 @@

Object Hierarchy

-
    GObject
+
    GObject
     ╰── PtPlayer
@@ -373,7 +373,7 @@

Implemented Interfaces

PtPlayer implements - GInitable.

+ GInitable.

Includes

@@ -412,8 +412,8 @@ plugin is missing. In this case NULL is returned, error is set.

After use g_object_unref() it.

-

Parameters

-
+

Parameters

+
@@ -427,7 +427,7 @@
-

Returns

+

Returns

a new pt_player.

[transfer full]

@@ -455,8 +455,8 @@

While loading the file there is a “load-progress” signal emitted which stops before reaching 100%. Don't use it to determine whether the operation is finished.

-

Parameters

-
+

Parameters

+
@@ -492,13 +492,13 @@

pt_player_open_uri_finish ()

gboolean
 pt_player_open_uri_finish (PtPlayer *player,
-                           GAsyncResult *result,
+                           GAsyncResult *result,
                            GError **error);

Gives the result of the async opening operation. A cancelled operation results in an error, too.

-

Parameters

-
+

Parameters

+
@@ -512,7 +512,7 @@ - + @@ -524,9 +524,8 @@

result

the GAsyncResult passed to your GAsyncReadyCallback

the GAsyncResult passed to your GAsyncReadyCallback

  
-

Returns

+

Returns

TRUE if successful, or FALSE with error set

-

@@ -551,8 +550,8 @@

While loading the file there is a “load-progress” signal emitted. However, it doesn't emit 100%, the operation is finished when TRUE is returned.

-

Parameters

-
+

Parameters

+
@@ -578,9 +577,8 @@
-

Returns

+

Returns

TRUE if successful, or FALSE with error set

-

@@ -590,8 +588,8 @@ pt_player_cancel (PtPlayer *player);

Cancels the file opening operation, which triggers an error message.

-

Parameters

-
+

Parameters

+
@@ -613,8 +611,8 @@

Starts playback at the defined speed until it reaches the end of stream (or the end of the selection)..

-

Parameters

-
+

Parameters

+
@@ -637,8 +635,8 @@ change position. To resume playback use pt_player_play() .

-

Parameters

-
+

Parameters

+
@@ -657,15 +655,15 @@

pt_player_set_selection ()

void
 pt_player_set_selection (PtPlayer *player,
-                         gint64 start,
-                         gint64 end);
+ gint64 start, + gint64 end);

Set a selection. If the current position is outside the selection, it will be set to the selection's start position, otherwise the current position is not changed. Playing will end at the stop position and it's not possible to jump out of the selection until it is cleared with pt_player_clear_selection.

-

Parameters

-
+

Parameters

+
@@ -698,8 +696,8 @@ pt_player_clear_selection (PtPlayer *player);

Clear and reset any selection.

-

Parameters

-
+

Parameters

+
@@ -726,8 +724,8 @@ If the resulting position would be negative (or before the selection), it jumps to position 0:00 (or to the start of the selection).

-

Parameters

-
+

Parameters

+
@@ -759,8 +757,8 @@ starting from position 0:00. A position beyond the duration of stream (or outside the selection) is ignored.

-

Parameters

-
+

Parameters

+
@@ -792,8 +790,8 @@ scale, it's up to you to convert it to 1/1000. Values beyond 1000 are not allowed, values outside the selection are ignored.

-

Parameters

-
+

Parameters

+
@@ -824,8 +822,8 @@ 1000.

Failure in querying the position returns -1.

-

Parameters

-
+

Parameters

+
@@ -839,9 +837,8 @@
-

Returns

+

Returns

a scale position between 0 and 1000 or -1 on failure

-

@@ -859,8 +856,8 @@ method. Changing the "speed" property of PtPlayer, will take effect only later.

-

Parameters

-
+

Parameters

+
@@ -890,8 +887,8 @@

Sets the volume on a scale between 0 and 1. Instead of using this method you could set the "volume" property.

-

Parameters

-
+

Parameters

+
@@ -921,8 +918,8 @@

Mute the player (with TRUE) or set it back to normal volume (with FALSE). This remembers the volume level, so you don't have to keep track of the old value.

-

Parameters

-
+

Parameters

+
@@ -961,8 +958,8 @@ good.

-

Parameters

-
+

Parameters

+
@@ -997,8 +994,8 @@ print a warning to standard output.

-

Parameters

-
+

Parameters

+
@@ -1022,12 +1019,12 @@

pt_player_get_position ()

-
gint64
+
gint64
 pt_player_get_position (PtPlayer *player);

 
Returns the current position in stream.

 

-
Parameters

-
+

Parameters

+
@@ -1041,20 +1038,19 @@
-

Returns

+

Returns

position in milliseconds or -1 on failure

-

pt_player_get_duration ()

-
gint64
+
gint64
 pt_player_get_duration (PtPlayer *player);

 
Returns the duration of stream.

 

-
Parameters

-

+
Parameters

+
@@ -1068,9 +1064,8 @@
 

 
 
 


 

 

-
Returns

+
Returns

 
 duration in milliseconds

-
@@ -1080,8 +1075,8 @@ pt_player_get_uri (PtPlayer *player);

Returns the URI of the currently open file or NULL if it can't be determined.

-

Parameters

-
+

Parameters

+
@@ -1095,7 +1090,7 @@
-

Returns

+

Returns

the uri.

[transfer full]

@@ -1107,8 +1102,8 @@ pt_player_get_filename (PtPlayer *player);

Returns the display name of the currently open file or NULL if it can't be determined.

-

Parameters

-
+

Parameters

+
@@ -1122,7 +1117,7 @@
-

Returns

+

Returns

the file name.

[transfer full]

@@ -1139,8 +1134,8 @@ , e.g. if duration is long format, it returns a string in long format, too.

-

Parameters

-
+

Parameters

+
@@ -1166,7 +1161,7 @@
-

Returns

+

Returns

the time string.

[transfer full]

@@ -1180,8 +1175,8 @@

Returns the current position of the stream as a string for display to the user.

If the current position can not be determined, NULL is returned.

-

Parameters

-
+

Parameters

+
@@ -1202,7 +1197,7 @@
-

Returns

+

Returns

the time string.

[transfer full]

@@ -1216,8 +1211,8 @@

Returns the duration of the stream as a string for display to the user.

If the duration can not be determined, NULL is returned.

-

Parameters

-
+

Parameters

+
@@ -1238,7 +1233,7 @@
-

Returns

+

Returns

the time string.

[transfer full]

@@ -1251,8 +1246,8 @@

Returns the current timestamp as a string. The format of timestamps can not be changed.

If the current position can not be determined, NULL is returned.

-

Parameters

-
+

Parameters

+
@@ -1266,7 +1261,7 @@
-

Returns

+

Returns

the timestamp.

[transfer full]

@@ -1281,8 +1276,8 @@

See also pt_player_goto_timestamp() if you want to go to the timestamp's position immediately after.

-

Parameters

-
+

Parameters

+
@@ -1303,9 +1298,8 @@
-

Returns

+

Returns

TRUE if the timestamp is valid, FALSE if not

-

@@ -1317,8 +1311,8 @@

Goes to the position of the timestamp. Returns false, if it's not a valid timestamp.

-

Parameters

-
+

Parameters

+
@@ -1339,9 +1333,8 @@
-

Returns

+

Returns

TRUE on success, FALSE if the timestamp is not valid

-

@@ -1356,8 +1349,8 @@ doesn't have to be necessarily exactly the requested resolution, it might be a bit differnt, depending on the bit rate.

-

Parameters

-
+

Parameters

+
@@ -1378,7 +1371,7 @@
-

Returns

+

Returns

the PtWavedata.

[transfer full]

@@ -1396,8 +1389,8 @@

enum PtPrecisionType

Enum values indicating desired precision of time strings.

-

Members

-
+

Members

+
@@ -1460,8 +1453,8 @@

The “end-of-stream” signal is emitted when the stream is at its end or when the end of selection is reached.

-

Parameters

-
+

Parameters

+
@@ -1481,7 +1474,7 @@
-

Flags: Run First

+

Flags: Run First

@@ -1493,8 +1486,8 @@

The “error” signal is emitted on errors opening the file or during playback. It's a severe error and the player is always reset.

-

Parameters

-
+

Parameters

+
@@ -1519,7 +1512,7 @@
-

Flags: Run First

+

Flags: Run First

@@ -1532,8 +1525,8 @@ emit the value 0.0 nor 1.0. Wait for a TRUE player-state-changed signal or an error signal to dismiss a gui element showing progress.

-

Parameters

-
+

Parameters

+
@@ -1558,12 +1551,11 @@
-

Flags: Run First

+

Flags: Run First

-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/PtProgressDialog.html parlatype-1.5.6/libparlatype/docs/reference/html/PtProgressDialog.html --- parlatype-1.5.4/libparlatype/docs/reference/html/PtProgressDialog.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/PtProgressDialog.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: PtProgressDialog - +PtProgressDialog: Parlatype Reference Manual + - + @@ -52,7 +52,7 @@

Functions

-
+
@@ -79,7 +79,7 @@

Types and Values

-
+
@@ -92,14 +92,14 @@

Object Hierarchy

-
    GObject
+
    GObject
     ╰── GInitiallyUnowned
-        ╰── GtkWidget
-            ╰── GtkContainer
-                ╰── GtkBin
-                    ╰── GtkWindow
-                        ╰── GtkDialog
-                            ╰── GtkMessageDialog
+        ╰── GtkWidget
+            ╰── GtkContainer
+                ╰── GtkBin
+                    ╰── GtkWindow
+                        ╰── GtkDialog
+                            ╰── GtkMessageDialog
                                 ╰── PtProgressDialog
@@ -107,7 +107,7 @@

Implemented Interfaces

PtProgressDialog implements - AtkImplementorIface and GtkBuildable.

+ AtkImplementorIface and GtkBuildable.

Includes

@@ -118,7 +118,7 @@

Description

PtProgressDialog is a ready to use dialog, intended to show progress while loading wave data. Note, that it is supposed to be shown via -gtk_widget_show_all() and loading wave data should be done asynchronously. +gtk_widget_show_all() and loading wave data should be done asynchronously. Using the synchronous version the dialog will not show up.

Assuming you have set up a PtPlayer *player, typical usage would be:

@@ -186,7 +186,7 @@ gpointer *user_data) { PtProgressDialog *dlg = (PtProgressDialog *) user_data; - gtk_widget_destroy (GTK_WIDGET (dlg)); + gtk_widget_destroy (GTK_WIDGET (dlg)); ... } @@ -204,7 +204,7 @@ G_CALLBACK (pt_progress_dialog_set_progress), PT_PROGRESS_DIALOG (progress_dlg)); -gtk_widget_show_all (win->priv->progress_dlg); +gtk_widget_show_all (win->priv->progress_dlg); pt_player_open_uri_async (player, uri, (GAsyncReadyCallback) open_cb, @@ -221,13 +221,13 @@

pt_progress_dialog_new ()

PtProgressDialog *
-pt_progress_dialog_new (GtkWindow *win);
-

A GtkMessageDialog with a label "Loading file...", a progress bar and a +pt_progress_dialog_new (GtkWindow *win); +

A GtkMessageDialog with a label "Loading file...", a progress bar and a cancel button.

-

After use gtk_widget_destroy() it.

+

After use gtk_widget_destroy() it.

-

Parameters

-
+

Parameters

+
@@ -241,7 +241,7 @@
-

Returns

+

Returns

a new PtProgressDialog.

[transfer none]

@@ -254,8 +254,8 @@ gdouble progress);

Sets the progress bar to the new value.

-

Parameters

-
+

Parameters

+
@@ -287,7 +287,6 @@
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/PtWavedata.html parlatype-1.5.6/libparlatype/docs/reference/html/PtWavedata.html --- parlatype-1.5.4/libparlatype/docs/reference/html/PtWavedata.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/PtWavedata.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: PtWavedata - +PtWavedata: Parlatype Reference Manual + - + @@ -51,7 +51,7 @@

Functions

-
+
@@ -86,7 +86,7 @@

Types and Values

-
+
@@ -99,7 +99,7 @@

Object Hierarchy

-
    GBoxed
+
    GBoxed
     ╰── PtWavedata
@@ -144,13 +144,14 @@

pt_wavedata_new ()

PtWavedata *
 pt_wavedata_new (gfloat *array,
-                 gint64 length,
+                 gint64 length,
                  guint channels,
                  guint px_per_sec);

Constructs a new PtWavedata.

+

[constructor]

-

Parameters

-
+

Parameters

+
@@ -181,7 +182,7 @@
-

Returns

+

Returns

new data, free after use with pt_wavedata_free().

[transfer full]

@@ -193,9 +194,10 @@ pt_wavedata_copy (PtWavedata *data);

Creates a copy of data .

+

[skip]

-

Parameters

-
+

Parameters

+
@@ -209,9 +211,8 @@
-

Returns

+

Returns

a new PtWavedata, free after use with pt_wavedata_free()

-

@@ -221,9 +222,10 @@ pt_wavedata_free (PtWavedata *data);

Free's data .

+

[skip]

-

Parameters

-
+

Parameters

+
@@ -252,8 +254,8 @@

Contains all information about the wave. Usually you don't have to access the struct's members.

-

Members

-
+

Members

+
@@ -270,7 +272,7 @@ - + @@ -292,7 +294,6 @@
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/PtWaveloader.html parlatype-1.5.6/libparlatype/docs/reference/html/PtWaveloader.html --- parlatype-1.5.4/libparlatype/docs/reference/html/PtWaveloader.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/PtWaveloader.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: PtWaveloader - +PtWaveloader: Parlatype Reference Manual + - + @@ -53,7 +53,7 @@

Functions

-
[array length=length]

gint64 length;

gint64 length;

number of elements in array

  
+
@@ -85,7 +85,7 @@
-gint64 +gint64 pt_waveloader_get_duration () @@ -104,7 +104,7 @@

Properties

-
+
@@ -120,7 +120,7 @@

Signals

-
+
@@ -129,13 +129,13 @@ - +
void progressRun FirstRun First

Types and Values

-
+
@@ -148,7 +148,7 @@

Object Hierarchy

-
    GObject
+
    GObject
     ╰── PtWaveloader
@@ -173,8 +173,8 @@ calling pt_waveloader_load_async() will fail with an error message.

After use g_object_unref() it.

-

Parameters

-
+

Parameters

+
@@ -188,7 +188,7 @@
-

Returns

+

Returns

a new PtWaveloader.

[transfer full]

@@ -198,13 +198,13 @@

pt_waveloader_load_finish ()

gboolean
 pt_waveloader_load_finish (PtWaveloader *wl,
-                           GAsyncResult *result,
+                           GAsyncResult *result,
                            GError **error);

Gives the result of the async load operation. A cancelled operation results in an error, too.

-

Parameters

-
+

Parameters

+
@@ -218,7 +218,7 @@ - + @@ -230,9 +230,8 @@

result

the GAsyncResult passed to your GAsyncReadyCallback

the GAsyncResult passed to your GAsyncReadyCallback

  
-

Returns

+

Returns

TRUE if successful, or FALSE with error set

-

@@ -240,7 +239,7 @@

pt_waveloader_load_async ()

void
 pt_waveloader_load_async (PtWaveloader *wl,
-                          GCancellable *cancellable,
+                          GCancellable *cancellable,
                           GAsyncReadyCallback callback,
                           gpointer user_data);

Writes the raw sample data to a temporary file and also gets the number of @@ -251,8 +250,8 @@

In your callback call pt_waveloader_load_finish to get the result of the operation.

-

Parameters

-
+

Parameters

+
@@ -266,7 +265,7 @@ - + @@ -286,13 +285,13 @@

pt_waveloader_get_duration ()

-
gint64
+
gint64
 pt_waveloader_get_duration (PtWaveloader *wl);

 
Returns the duration of stream. As the whole stream is scanned, this is
 supposed to be an exact duration, not an estimate.

 

-
Parameters

-

cancellable

a GCancellable or NULL.

a GCancellable or NULL.

[allow-none]
+

Parameters

+
@@ -306,9 +305,8 @@
-

Returns

+

Returns

duration in nanoseconds as used by GStreamer

-

@@ -323,8 +321,8 @@ doesn't have to be necessarily exactly the requested resolution, it might be a bit differnt, depending on the bit rate.

-

Parameters

-
+

Parameters

+
@@ -345,7 +343,7 @@
-

Returns

+

Returns

the PtWavedata, after use free with pt_wavedata_free().

[transfer full]

@@ -381,8 +379,8 @@ emit the value 0.0 nor 1.0. Wait for a successful operation until any gui element showing progress is dismissed.

-

Parameters

-
+

Parameters

+
@@ -407,12 +405,11 @@
-

Flags: Run First

+

Flags: Run First

-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/PtWaveviewer.html parlatype-1.5.6/libparlatype/docs/reference/html/PtWaveviewer.html --- parlatype-1.5.4/libparlatype/docs/reference/html/PtWaveviewer.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/PtWaveviewer.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: PtWaveviewer - +PtWaveviewer: Parlatype Reference Manual + - + @@ -54,7 +54,7 @@

Functions

-
+
@@ -62,7 +62,7 @@
-GtkWidget * +GtkWidget * pt_waveviewer_new () @@ -97,7 +97,7 @@

Properties

-
+
@@ -120,17 +120,17 @@ - + - + - + @@ -139,12 +139,17 @@ + + + + +
Read
gint64gint64 playback-cursor Write
gint64gint64 selection-end Read
gint64gint64 selection-start Read
show-ruler Read / Write / Construct
gbooleanzoomWrite / Construct

Signals

-
+
@@ -154,24 +159,34 @@ - + - + - + + + + + + + + + + +
void cursor-changedRun FirstRun First
void play-toggledRun FirstRun First
void selection-changedRun FirstRun First
voidzoom-inRun First
voidzoom-outRun First

Types and Values

-
+
@@ -184,12 +199,12 @@

Object Hierarchy

-
    GObject
+
    GObject
     ╰── GInitiallyUnowned
-        ╰── GtkWidget
-            ╰── GtkContainer
-                ╰── GtkBin
-                    ╰── GtkScrolledWindow
+        ╰── GtkWidget
+            ╰── GtkContainer
+                ╰── GtkBin
+                    ╰── GtkScrolledWindow
                         ╰── PtWaveviewer
@@ -197,7 +212,7 @@

Implemented Interfaces

PtWaveviewer implements - AtkImplementorIface and GtkBuildable.

+ AtkImplementorIface and GtkBuildable.

Includes

@@ -212,15 +227,14 @@

Functions

pt_waveviewer_new ()

-
GtkWidget *
+
GtkWidget *
 pt_waveviewer_new (void);

 
Create a new, initially blank waveform viewer widget. Use
 pt_waveviewer_set_wave() to pass wave data.

-
After use gtk_widget_destroy() it.

+
After use gtk_widget_destroy() it.

 

-
Returns

+
Returns

 
 the widget

-
@@ -234,8 +248,8 @@ is NULL, a blank widget is drawn.

-

Parameters

-
+

Parameters

+
@@ -264,8 +278,8 @@ gboolean follow);

Set follow-cursor option to TRUE or FALSE. See also “follow-cursor”.

-

Parameters

-
+

Parameters

+
@@ -293,8 +307,8 @@ pt_waveviewer_get_follow_cursor (PtWaveviewer *self);

Get follow-cursor option.

-

Parameters

-
+

Parameters

+
@@ -308,9 +322,8 @@
-

Returns

+

Returns

TRUE if cursor is followed, else FALSE

-

@@ -354,7 +367,7 @@

The “playback-cursor” property

-
  “playback-cursor”          gint64
+
  “playback-cursor”          gint64

Current playback position in milliseconds.

Flags: Write

Allowed values: >= 0

@@ -363,7 +376,7 @@

The “selection-end” property

-
  “selection-end”            gint64
+
  “selection-end”            gint64

End time of selection in milliseconds. If it's equal to the start time, there is no selection. See also “has-selection”.

Flags: Read

@@ -373,7 +386,7 @@

The “selection-start” property

-
  “selection-start”          gint64
+
  “selection-start”          gint64

Start time of selection in milliseconds. If it's equal to the end time, there is no selection. See also “has-selection”.

Flags: Read

@@ -388,6 +401,18 @@

Flags: Read / Write / Construct

Default value: TRUE

+
+
+

The “zoom” property

+
  “zoom”                     gboolean
+

Set this to TRUE to indicate that the next wave data will be the same +waveform but at a different zoom level. PtWaveviewer needs this to +decide which part of the waveform should be shown. +– Note: This will be probably removed with the next API break in +version 1.6 and integrated into pt_waveviewer_set_wave().

+

Flags: Write / Construct

+

Default value: FALSE

+

Signal Details

@@ -395,12 +420,12 @@

The “cursor-changed” signal

void
 user_function (PtWaveviewer *viewer,
-               gint64        position,
+               gint64        position,
                gpointer      user_data)

Signals that the cursor's position was changed by the user.

-

Parameters

-
+

Parameters

+
@@ -425,7 +450,7 @@
-

Flags: Run First

+

Flags: Run First

@@ -435,8 +460,8 @@ gpointer user_data)

Signals that the user requested to toggle play/pause.

-

Parameters

-
+

Parameters

+
@@ -456,7 +481,7 @@
-

Flags: Run First

+

Flags: Run First

@@ -468,8 +493,39 @@ To query the new selection see “has-selection”, “selection-start” and “selection-end”.

-

Parameters

-
+

Parameters

+
+++++ + + + + + + + + + + + + +

viewer

the waveviewer emitting the signal

 

user_data

user data set when the signal handler was connected.

 
+
+

Flags: Run First

+
+
+
+

The “zoom-in” signal

+
void
+user_function (PtWaveviewer *viewer,
+               gpointer      user_data)
+

Signals that the user requested to zoom into the waveform.

+
+

Parameters

+
@@ -489,12 +545,42 @@
-

Flags: Run First

+

Flags: Run First

+
+
+
+

The “zoom-out” signal

+
void
+user_function (PtWaveviewer *viewer,
+               gpointer      user_data)
+

Signals that the user requested to zoom out of the waveform.

+
+

Parameters

+
+++++ + + + + + + + + + + + + +

viewer

the waveviewer emitting the signal

 

user_data

user data set when the signal handler was connected.

 
+
+

Flags: Run First

-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/python_example.html parlatype-1.5.6/libparlatype/docs/reference/html/python_example.html --- parlatype-1.5.4/libparlatype/docs/reference/html/python_example.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/python_example.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: A python example - +A python example: Parlatype Reference Manual + - + @@ -356,7 +356,6 @@
-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file Binary files /tmp/tmpLTxFFY/pLuCVj8vom/parlatype-1.5.4/libparlatype/docs/reference/html/right-insensitive.png and /tmp/tmpLTxFFY/ACrcXi3QE1/parlatype-1.5.6/libparlatype/docs/reference/html/right-insensitive.png differ Binary files /tmp/tmpLTxFFY/pLuCVj8vom/parlatype-1.5.4/libparlatype/docs/reference/html/right.png and /tmp/tmpLTxFFY/ACrcXi3QE1/parlatype-1.5.6/libparlatype/docs/reference/html/right.png differ diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/style.css parlatype-1.5.6/libparlatype/docs/reference/html/style.css --- parlatype-1.5.4/libparlatype/docs/reference/html/style.css 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/style.css 2018-08-17 10:50:12.000000000 +0000 @@ -60,7 +60,7 @@ div.informaltable table { border-collapse: separate; - border-spacing: 1em 0.5em; + border-spacing: 1em 0.3em; border: none; } @@ -148,6 +148,8 @@ h4 { color: #555753; + margin-top: 1em; + margin-bottom: 1em; } hr @@ -166,17 +168,16 @@ padding-bottom: 0.25em; } -dl.toc > dd > dl > dt +dl.toc > dt { padding-top: 0.25em; padding-bottom: 0.25em; + font-weight: bold; } -dl.toc > dt +dl.toc > dl { - padding-top: 1em; padding-bottom: 0.5em; - font-weight: bold; } .parameter @@ -346,7 +347,9 @@ } @media screen { - sup a.footnote + /* these have a as a first child, but since there are no parent selectors + * we can't use that. */ + a.footnote { position: relative; top: 0em ! important; Binary files /tmp/tmpLTxFFY/pLuCVj8vom/parlatype-1.5.4/libparlatype/docs/reference/html/up-insensitive.png and /tmp/tmpLTxFFY/ACrcXi3QE1/parlatype-1.5.6/libparlatype/docs/reference/html/up-insensitive.png differ Binary files /tmp/tmpLTxFFY/pLuCVj8vom/parlatype-1.5.4/libparlatype/docs/reference/html/up.png and /tmp/tmpLTxFFY/ACrcXi3QE1/parlatype-1.5.6/libparlatype/docs/reference/html/up.png differ diff -Nru parlatype-1.5.4/libparlatype/docs/reference/html/using_library.html parlatype-1.5.6/libparlatype/docs/reference/html/using_library.html --- parlatype-1.5.4/libparlatype/docs/reference/html/using_library.html 2017-11-19 15:50:03.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/html/using_library.html 2018-08-17 10:50:12.000000000 +0000 @@ -2,13 +2,13 @@ -Parlatype Reference Manual: Using the library - +Using the library: Parlatype Reference Manual + - + @@ -43,7 +43,6 @@ glade projects.

-
- Generated by GTK-Doc V1.21
+
Generated by GTK-Doc V1.25 \ No newline at end of file diff -Nru parlatype-1.5.4/libparlatype/docs/reference/Makefile.in parlatype-1.5.6/libparlatype/docs/reference/Makefile.in --- parlatype-1.5.4/libparlatype/docs/reference/Makefile.in 2017-11-19 15:49:47.000000000 +0000 +++ parlatype-1.5.6/libparlatype/docs/reference/Makefile.in 2018-08-17 10:45:35.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -20,7 +20,17 @@ # Everything below here is generic # #################################### VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -83,9 +93,6 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ -DIST_COMMON = $(top_srcdir)/gtk-doc.make $(srcdir)/Makefile.in \ - $(srcdir)/Makefile.am $(srcdir)/version.xml.in \ - $(top_srcdir)/test-driver subdir = docs/reference ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ @@ -97,6 +104,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = version.xml @@ -327,6 +335,8 @@ *) \ b='$*';; \ esac +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/version.xml.in \ + $(top_srcdir)/gtk-doc.make $(top_srcdir)/test-driver DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -353,7 +363,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ @@ -422,6 +431,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -507,6 +517,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -636,6 +647,7 @@ TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE) SETUP_FILES = \ $(content_files) \ + $(expand_content_files) \ $(DOC_MAIN_SGML_FILE) \ $(DOC_MODULE)-sections.txt \ $(DOC_MODULE)-overrides.txt @@ -729,7 +741,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/reference/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign docs/reference/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -738,7 +749,7 @@ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; -$(top_srcdir)/gtk-doc.make: +$(top_srcdir)/gtk-doc.make $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh @@ -798,7 +809,7 @@ if test -n "$$am__remaking_logs"; then \ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ "recursion detected" >&2; \ - else \ + elif test -n "$$redo_logs"; then \ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ fi; \ if $(am__make_dryrun); then :; else \ @@ -1106,6 +1117,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ recheck tags-am uninstall uninstall-am uninstall-local +.PRECIOUS: Makefile + gtkdoc-check.test: Makefile $(AM_V_GEN)echo "#!/bin/sh -e" > $@; \ @@ -1123,7 +1136,7 @@ setup-build.stamp: -$(GTK_DOC_V_SETUP)if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ - files=`echo $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types`; \ + files=`echo $(SETUP_FILES) $(DOC_MODULE).types`; \ if test "x$$files" != "x" ; then \ for file in $$files ; do \ destdir=`dirname $(abs_builddir)/$$file`; \ @@ -1144,7 +1157,7 @@ $(GTK_DOC_V_INTROSPECT)if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \ scanobj_options=""; \ gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$(?)" = "0"; then \ + if test "$$?" = "0"; then \ if test "x$(V)" = "x1"; then \ scanobj_options="--verbose"; \ fi; \ @@ -1161,7 +1174,7 @@ $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp @true -sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) +sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) xml/gtkdocentities.ent $(GTK_DOC_V_XML)_source_dir='' ; \ for i in $(DOC_SOURCE_DIR) ; do \ _source_dir="$${_source_dir} --source-dir=$$i" ; \ @@ -1172,17 +1185,28 @@ sgml.stamp: sgml-build.stamp @true -html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) +xml/gtkdocentities.ent: Makefile + $(GTK_DOC_V_XML)$(MKDIR_P) $(@D) && ( \ + echo ""; \ + echo ""; \ + echo ""; \ + echo ""; \ + echo ""; \ + echo ""; \ + echo ""; \ + ) > $@ + +html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files) $(GTK_DOC_V_HTML)rm -rf html && mkdir html && \ mkhtml_options=""; \ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$(?)" = "0"; then \ + if test "$$?" = "0"; then \ if test "x$(V)" = "x1"; then \ mkhtml_options="$$mkhtml_options --verbose"; \ fi; \ fi; \ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \ - if test "$(?)" = "0"; then \ + if test "$$?" = "0"; then \ mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \ fi; \ cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) @@ -1194,15 +1218,16 @@ if test -f $(abs_builddir)/$$file ; then \ cp $(abs_builddir)/$$file $(abs_builddir)/html; \ fi; \ + test -f $$file && cp $$file $(abs_builddir)/html; \ done; $(GTK_DOC_V_XREF)gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS) $(AM_V_at)touch html-build.stamp -pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) +pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files) $(GTK_DOC_V_PDF)rm -f $(DOC_MODULE).pdf && \ mkpdf_options=""; \ gtkdoc-mkpdf 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$(?)" = "0"; then \ + if test "$$?" = "0"; then \ if test "x$(V)" = "x1"; then \ mkpdf_options="$$mkpdf_options --verbose"; \ fi; \ @@ -1227,12 +1252,15 @@ @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-types" ; then \ rm -f $(DOC_MODULE).types; \ fi + @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-sections" ; then \ + rm -f $(DOC_MODULE)-sections.txt; \ + fi distclean-local: @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \ $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ - rm -f $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types; \ + rm -f $(SETUP_FILES) $(DOC_MODULE).types; \ fi maintainer-clean-local: diff -Nru parlatype-1.5.4/libparlatype/gtk-doc.make parlatype-1.5.6/libparlatype/gtk-doc.make --- parlatype-1.5.4/libparlatype/gtk-doc.make 2017-10-12 10:55:18.000000000 +0000 +++ parlatype-1.5.6/libparlatype/gtk-doc.make 2018-04-09 18:21:49.000000000 +0000 @@ -25,6 +25,7 @@ SETUP_FILES = \ $(content_files) \ + $(expand_content_files) \ $(DOC_MAIN_SGML_FILE) \ $(DOC_MODULE)-sections.txt \ $(DOC_MODULE)-overrides.txt @@ -86,7 +87,7 @@ setup-build.stamp: -$(GTK_DOC_V_SETUP)if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ - files=`echo $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types`; \ + files=`echo $(SETUP_FILES) $(DOC_MODULE).types`; \ if test "x$$files" != "x" ; then \ for file in $$files ; do \ destdir=`dirname $(abs_builddir)/$$file`; \ @@ -118,7 +119,7 @@ $(GTK_DOC_V_INTROSPECT)if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \ scanobj_options=""; \ gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$(?)" = "0"; then \ + if test "$$?" = "0"; then \ if test "x$(V)" = "x1"; then \ scanobj_options="--verbose"; \ fi; \ @@ -141,7 +142,7 @@ GTK_DOC_V_XML_=$(GTK_DOC_V_XML_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_XML_0=@echo " DOC Building XML"; -sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) +sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) xml/gtkdocentities.ent $(GTK_DOC_V_XML)_source_dir='' ; \ for i in $(DOC_SOURCE_DIR) ; do \ _source_dir="$${_source_dir} --source-dir=$$i" ; \ @@ -152,6 +153,17 @@ sgml.stamp: sgml-build.stamp @true +xml/gtkdocentities.ent: Makefile + $(GTK_DOC_V_XML)$(MKDIR_P) $(@D) && ( \ + echo ""; \ + echo ""; \ + echo ""; \ + echo ""; \ + echo ""; \ + echo ""; \ + echo ""; \ + ) > $@ + #### html #### GTK_DOC_V_HTML=$(GTK_DOC_V_HTML_$(V)) @@ -162,17 +174,17 @@ GTK_DOC_V_XREF_=$(GTK_DOC_V_XREF_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_XREF_0=@echo " DOC Fixing cross-references"; -html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) +html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files) $(GTK_DOC_V_HTML)rm -rf html && mkdir html && \ mkhtml_options=""; \ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$(?)" = "0"; then \ + if test "$$?" = "0"; then \ if test "x$(V)" = "x1"; then \ mkhtml_options="$$mkhtml_options --verbose"; \ fi; \ fi; \ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \ - if test "$(?)" = "0"; then \ + if test "$$?" = "0"; then \ mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \ fi; \ cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) @@ -184,6 +196,7 @@ if test -f $(abs_builddir)/$$file ; then \ cp $(abs_builddir)/$$file $(abs_builddir)/html; \ fi; \ + test -f $$file && cp $$file $(abs_builddir)/html; \ done; $(GTK_DOC_V_XREF)gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS) $(AM_V_at)touch html-build.stamp @@ -194,11 +207,11 @@ GTK_DOC_V_PDF_=$(GTK_DOC_V_PDF_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_PDF_0=@echo " DOC Building PDF"; -pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) +pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files) $(GTK_DOC_V_PDF)rm -f $(DOC_MODULE).pdf && \ mkpdf_options=""; \ gtkdoc-mkpdf 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$(?)" = "0"; then \ + if test "$$?" = "0"; then \ if test "x$(V)" = "x1"; then \ mkpdf_options="$$mkpdf_options --verbose"; \ fi; \ @@ -223,12 +236,15 @@ @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-types" ; then \ rm -f $(DOC_MODULE).types; \ fi + @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-sections" ; then \ + rm -f $(DOC_MODULE)-sections.txt; \ + fi distclean-local: @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \ $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ - rm -f $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types; \ + rm -f $(SETUP_FILES) $(DOC_MODULE).types; \ fi maintainer-clean-local: diff -Nru parlatype-1.5.4/libparlatype/install-sh parlatype-1.5.6/libparlatype/install-sh --- parlatype-1.5.4/libparlatype/install-sh 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/libparlatype/install-sh 2018-04-09 18:22:52.000000000 +0000 @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2011-11-20.07; # UTC +scriptversion=2014-09-12.12; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -41,19 +41,15 @@ # This script is compatible with the BSD install script, but was written # from scratch. +tab=' ' nl=' ' -IFS=" "" $nl" +IFS=" $tab$nl" -# set DOITPROG to echo to test this script +# Set DOITPROG to "echo" to test this script. -# Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi +doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. @@ -68,17 +64,6 @@ rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - posix_mkdir= # Desired mode of installed file. @@ -97,7 +82,7 @@ dst_arg= copy_on_change=false -no_target_directory= +is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE @@ -137,46 +122,57 @@ -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift;; + shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift;; + shift;; -s) stripcmd=$stripprog;; - -t) dst_arg=$2 - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; - -T) no_target_directory=true;; + -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; - --) shift - break;; + --) shift + break;; - -*) echo "$0: invalid option: $1" >&2 - exit 1;; + -*) echo "$0: invalid option: $1" >&2 + exit 1;; *) break;; esac shift done +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. @@ -208,6 +204,15 @@ fi if test -z "$dir_arg"; then + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 @@ -223,16 +228,16 @@ *[0-7]) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw='% 200' + u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw=,u+rw + u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac @@ -269,41 +274,15 @@ # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - + dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi @@ -314,81 +293,81 @@ if test $dstdir_status != 0; then case $posix_mkdir in '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) # $RANDOM is not portable (e.g. dash); use it when possible to # lower collision chance - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 - # As "mkdir -p" follows symlinks and we work in /tmp possibly; so - # create the $tmpdir first (and fail if unsuccessful) to make sure - # that nobody tries to guess the $tmpdir name. - if (umask $mkdir_umask && - $mkdirprog $mkdir_mode "$tmpdir" && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - test_tmpdir="$tmpdir/a" - ls_ld_tmpdir=`ls -ld "$test_tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null - fi - trap '' 0;; - esac;; + # As "mkdir -p" follows symlinks and we work in /tmp possibly; so + # create the $tmpdir first (and fail if unsuccessful) to make sure + # that nobody tries to guess the $tmpdir name. + if (umask $mkdir_umask && + $mkdirprog $mkdir_mode "$tmpdir" && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + test_tmpdir="$tmpdir/a" + ls_ld_tmpdir=`ls -ld "$test_tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null + fi + trap '' 0;; + esac;; esac if $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else @@ -398,53 +377,51 @@ # directory the slow way, step by step, checking for races as we go. case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; esac - eval "$initialize_posix_glob" - oIFS=$IFS IFS=/ - $posix_glob set -f + set -f set fnord $dstdir shift - $posix_glob set +f + set +f IFS=$oIFS prefixes= for d do - test X"$d" = X && continue + test X"$d" = X && continue - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ done if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi fi fi @@ -479,15 +456,12 @@ # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - + set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then @@ -500,24 +474,24 @@ # to itself, or perhaps because mv is so ancient that it does not # support -f. { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 diff -Nru parlatype-1.5.4/libparlatype/ltmain.sh parlatype-1.5.6/libparlatype/ltmain.sh --- parlatype-1.5.4/libparlatype/ltmain.sh 2017-10-12 10:55:43.000000000 +0000 +++ parlatype-1.5.6/libparlatype/ltmain.sh 2018-04-09 18:22:30.000000000 +0000 @@ -1,9 +1,12 @@ +#! /bin/sh +## DO NOT EDIT - This file generated from ./build-aux/ltmain.in +## by inline-source v2014-01-03.01 -# libtool (GNU libtool) 2.4.2 +# libtool (GNU libtool) 2.4.6 +# Provide generalized library-building support services. # Written by Gordon Matzigkeit , 1996 -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# Copyright (C) 1996-2015 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -23,881 +26,2112 @@ # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, -# or obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with this program. If not, see . -# Usage: $progname [OPTION]... [MODE-ARG]... -# -# Provide generalized library-building support services. -# -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --no-quiet, --no-silent -# print informational messages (default) -# --no-warn don't display warning messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print more informational messages than default -# --no-verbose don't print the extra informational messages -# --version print version information -# -h, --help, --help-all print short, long, or detailed help message -# -# MODE must be one of the following: -# -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory -# -# MODE-ARGS vary depending on the MODE. When passed as first option, -# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. -# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -# -# When reporting a bug, please describe a test case to reproduce it and -# include the following information: -# -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1.11 -# automake: $automake_version -# autoconf: $autoconf_version -# -# Report bugs to . -# GNU libtool home page: . -# General help using GNU software: . PROGRAM=libtool PACKAGE=libtool -VERSION="2.4.2 Debian-2.4.2-1.11" -TIMESTAMP="" -package_revision=1.3337 +VERSION="2.4.6 Debian-2.4.6-2" +package_revision=2.4.6 -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + +## ------ ## +## Usage. ## +## ------ ## + +# Run './libtool --help' for help with using this script from the +# command line. + + +## ------------------------------- ## +## User overridable command paths. ## +## ------------------------------- ## + +# After configure completes, it has a better idea of some of the +# shell tools we need than the defaults used by the functions shared +# with bootstrap, so set those here where they can still be over- +# ridden by the user, but otherwise take precedence. + +: ${AUTOCONF="autoconf"} +: ${AUTOMAKE="automake"} + + +## -------------------------- ## +## Source external libraries. ## +## -------------------------- ## + +# Much of our low-level functionality needs to be sourced from external +# libraries, which are installed to $pkgauxdir. + +# Set a version string for this script. +scriptversion=2015-01-20.17; # UTC + +# General shell script boiler plate, and helper functions. +# Written by Gary V. Vaughan, 2004 + +# Copyright (C) 2004-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. + +# As a special exception to the GNU General Public License, if you distribute +# this file as part of a program or library that is built using GNU Libtool, +# you may include this file under the same distribution terms that you use +# for the rest of that program. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Please report bugs or propose patches to gary@gnu.org. + + +## ------ ## +## Usage. ## +## ------ ## + +# Evaluate this file near the top of your script to gain access to +# the functions and variables defined here: +# +# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh +# +# If you need to override any of the default environment variable +# settings, do that before evaluating this file. + + +## -------------------- ## +## Shell normalisation. ## +## -------------------- ## + +# Some shells need a little help to be as Bourne compatible as possible. +# Before doing anything else, make sure all that help has been provided! + +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} -# NLS nuisances: We save the old values to restore during execute mode. -lt_user_locale= -lt_safe_locale= -for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +# NLS nuisances: We save the old values in case they are required later. +_G_user_locale= +_G_safe_locale= +for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do - eval "if test \"\${$lt_var+set}\" = set; then - save_$lt_var=\$$lt_var - $lt_var=C - export $lt_var - lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" - lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + eval "if test set = \"\${$_G_var+set}\"; then + save_$_G_var=\$$_G_var + $_G_var=C + export $_G_var + _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" + _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" fi" done -LC_ALL=C -LANGUAGE=C -export LANGUAGE LC_ALL -$lt_unset CDPATH +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Make sure IFS has a sensible default +sp=' ' +nl=' +' +IFS="$sp $nl" +# There are apparently some retarded systems that use ';' as a PATH separator! +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" +## ------------------------- ## +## Locate command utilities. ## +## ------------------------- ## + + +# func_executable_p FILE +# ---------------------- +# Check that FILE is an executable regular file. +func_executable_p () +{ + test -f "$1" && test -x "$1" +} + + +# func_path_progs PROGS_LIST CHECK_FUNC [PATH] +# -------------------------------------------- +# Search for either a program that responds to --version with output +# containing "GNU", or else returned by CHECK_FUNC otherwise, by +# trying all the directories in PATH with each of the elements of +# PROGS_LIST. +# +# CHECK_FUNC should accept the path to a candidate program, and +# set $func_check_prog_result if it truncates its output less than +# $_G_path_prog_max characters. +func_path_progs () +{ + _G_progs_list=$1 + _G_check_func=$2 + _G_PATH=${3-"$PATH"} + + _G_path_prog_max=0 + _G_path_prog_found=false + _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} + for _G_dir in $_G_PATH; do + IFS=$_G_save_IFS + test -z "$_G_dir" && _G_dir=. + for _G_prog_name in $_G_progs_list; do + for _exeext in '' .EXE; do + _G_path_prog=$_G_dir/$_G_prog_name$_exeext + func_executable_p "$_G_path_prog" || continue + case `"$_G_path_prog" --version 2>&1` in + *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; + *) $_G_check_func $_G_path_prog + func_path_progs_result=$func_check_prog_result + ;; + esac + $_G_path_prog_found && break 3 + done + done + done + IFS=$_G_save_IFS + test -z "$func_path_progs_result" && { + echo "no acceptable sed could be found in \$PATH" >&2 + exit 1 + } +} + + +# We want to be able to use the functions in this file before configure +# has figured out where the best binaries are kept, which means we have +# to search for them ourselves - except when the results are already set +# where we skip the searches. + +# Unless the user overrides by setting SED, search the path for either GNU +# sed, or the sed that truncates its output the least. +test -z "$SED" && { + _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for _G_i in 1 2 3 4 5 6 7; do + _G_sed_script=$_G_sed_script$nl$_G_sed_script + done + echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed + _G_sed_script= + + func_check_prog_sed () + { + _G_path_prog=$1 + + _G_count=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo '' >> conftest.nl + "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin + rm -f conftest.sed + SED=$func_path_progs_result +} + + +# Unless the user overrides by setting GREP, search the path for either GNU +# grep, or the grep that truncates its output the least. +test -z "$GREP" && { + func_check_prog_grep () + { + _G_path_prog=$1 + + _G_count=0 + _G_path_prog_max=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo 'GREP' >> conftest.nl + "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin + GREP=$func_path_progs_result +} + + +## ------------------------------- ## +## User overridable command paths. ## +## ------------------------------- ## + +# All uppercase variable names are used for environment variables. These +# variables can be overridden by the user before calling a script that +# uses them if a suitable command of that name is not already available +# in the command search PATH. : ${CP="cp -f"} -test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${ECHO="printf %s\n"} +: ${EGREP="$GREP -E"} +: ${FGREP="$GREP -F"} +: ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} -: ${Xsed="$SED -e 1s/^X//"} - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -exit_status=$EXIT_SUCCESS - -# Make sure IFS has a sensible default -lt_nl=' -' -IFS=" $lt_nl" -dirname="s,/[^/]*$,," -basename="s,^.*/,," -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} # func_dirname may be replaced by extended shell implementation +## -------------------- ## +## Useful sed snippets. ## +## -------------------- ## +sed_dirname='s|/[^/]*$||' +sed_basename='s|^.*/||' -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "${1}" | $SED "$basename"` -} # func_basename may be replaced by extended shell implementation +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s|\([`"$\\]\)|\\\1|g' +# Same as above, but do not quote variable references. +sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` -} # func_dirname_and_basename may be replaced by extended shell implementation +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' +# Sed substitution that converts a w32 file name or path +# that contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname may be replaced by extended shell implementation +# Re-'\' parameter expansions in output of sed_double_quote_subst that +# were '\'-ed in input to the same. If an odd number of '\' preceded a +# '$' in input to sed_double_quote_subst, that '$' was protected from +# expansion. Since each input '\' is now two '\'s, look for any number +# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. +_G_bs='\\' +_G_bs2='\\\\' +_G_bs4='\\\\\\\\' +_G_dollar='\$' +sed_double_backslash="\ + s/$_G_bs4/&\\ +/g + s/^$_G_bs2$_G_dollar/$_G_bs&/ + s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g + s/\n//g" -# These SED scripts presuppose an absolute path with a trailing slash. -pathcar='s,^/\([^/]*\).*$,\1,' -pathcdr='s,^/[^/]*,,' -removedotparts=':dotsl - s@/\./@/@g - t dotsl - s,/\.$,/,' -collapseslashes='s@/\{1,\}@/@g' -finalslash='s,/*$,/,' +## ----------------- ## +## Global variables. ## +## ----------------- ## + +# Except for the global variables explicitly listed below, the following +# functions in the '^func_' namespace, and the '^require_' namespace +# variables initialised in the 'Resource management' section, sourcing +# this file will not pollute your global namespace with anything +# else. There's no portable way to scope variables in Bourne shell +# though, so actually running these functions will sometimes place +# results into a variable named after the function, and often use +# temporary variables in the '^_G_' namespace. If you are careful to +# avoid using those namespaces casually in your sourcing script, things +# should continue to work as you expect. And, of course, you can freely +# overwrite any of the functions or variables defined here before +# calling anything to customize them. -# func_normal_abspath PATH -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -# value returned in "$func_normal_abspath_result" -func_normal_abspath () -{ - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` - while :; do - # Processed it all yet? - if test "$func_normal_abspath_tpath" = / ; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result" ; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result -} +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. -# func_relative_path SRCDIR DSTDIR -# generates a relative path from SRCDIR to DSTDIR, with a trailing -# slash if non-empty, suitable for immediately appending a filename -# without needing to append a separator. -# value returned in "$func_relative_path_result" -func_relative_path () -{ - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=${func_dirname_result} - if test "x$func_relative_path_tlibdir" = x ; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done +# Allow overriding, eg assuming that you follow the convention of +# putting '$debug_cmd' at the start of all your functions, you can get +# bash to show function call trace with: +# +# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name +debug_cmd=${debug_cmd-":"} +exit_cmd=: - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test "x$func_stripname_result" != x ; then - func_relative_path_result=${func_relative_path_result}/${func_stripname_result} - fi +# By convention, finish your script with: +# +# exit $exit_status +# +# so that you can set exit_status to non-zero if you want to indicate +# something went wrong during execution without actually bailing out at +# the point of failure. +exit_status=$EXIT_SUCCESS - # Normalisation. If bindir is libdir, return empty string, - # else relative path ending with a slash; either way, target - # file name can be directly appended. - if test ! -z "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result/" - func_relative_path_result=$func_stripname_result - fi -} +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath=$0 -# The name of this program: -func_dirname_and_basename "$progpath" -progname=$func_basename_result +# The name of this program. +progname=`$ECHO "$progpath" |$SED "$sed_basename"` -# Make sure we have an absolute path for reexecution: +# Make sure we have an absolute progpath for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) - progdir=$func_dirname_result + progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` progdir=`cd "$progdir" && pwd` - progpath="$progdir/$progname" + progpath=$progdir/$progname ;; *) - save_IFS="$IFS" + _G_IFS=$IFS IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do - IFS="$save_IFS" + IFS=$_G_IFS test -x "$progdir/$progname" && break done - IFS="$save_IFS" + IFS=$_G_IFS test -n "$progdir" || progdir=`pwd` - progpath="$progdir/$progname" + progpath=$progdir/$progname ;; esac -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' -# Sed substitution that converts a w32 file name or path -# which contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - -# Re-`\' parameter expansions in output of double_quote_subst that were -# `\'-ed in input to the same. If an odd number of `\' preceded a '$' -# in input to double_quote_subst, that '$' was protected from expansion. -# Since each input `\' is now two `\'s, look for any number of runs of -# four `\'s followed by two `\'s and then a '$'. `\' that '$'. -bs='\\' -bs2='\\\\' -bs4='\\\\\\\\' -dollar='\$' -sed_double_backslash="\ - s/$bs4/&\\ -/g - s/^$bs2$dollar/$bs&/ - s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g - s/\n//g" +## ----------------- ## +## Standard options. ## +## ----------------- ## + +# The following options affect the operation of the functions defined +# below, and should be set appropriately depending on run-time para- +# meters passed on the command line. -# Standard options: opt_dry_run=false -opt_help=false opt_quiet=false opt_verbose=false -opt_warning=: - -# func_echo arg... -# Echo program name prefixed message, along with the current mode -# name if it has been set yet. -func_echo () -{ - $ECHO "$progname: ${opt_mode+$opt_mode: }$*" -} -# func_verbose arg... -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $opt_verbose && func_echo ${1+"$@"} +# Categories 'all' and 'none' are always available. Append any others +# you will pass as the first argument to func_warning from your own +# code. +warning_categories= + +# By default, display warnings according to 'opt_warning_types'. Set +# 'warning_func' to ':' to elide all warnings, or func_fatal_error to +# treat the next displayed warning as a fatal error. +warning_func=func_warn_and_continue + +# Set to 'all' to display all warnings, 'none' to suppress all +# warnings, or a space delimited list of some subset of +# 'warning_categories' to display only the listed warnings. +opt_warning_types=all + + +## -------------------- ## +## Resource management. ## +## -------------------- ## + +# This section contains definitions for functions that each ensure a +# particular resource (a file, or a non-empty configuration variable for +# example) is available, and if appropriate to extract default values +# from pertinent package files. Call them using their associated +# 'require_*' variable to ensure that they are executed, at most, once. +# +# It's entirely deliberate that calling these functions can set +# variables that don't obey the namespace limitations obeyed by the rest +# of this file, in order that that they be as useful as possible to +# callers. + + +# require_term_colors +# ------------------- +# Allow display of bold text on terminals that support it. +require_term_colors=func_require_term_colors +func_require_term_colors () +{ + $debug_cmd + + test -t 1 && { + # COLORTERM and USE_ANSI_COLORS environment variables take + # precedence, because most terminfo databases neglect to describe + # whether color sequences are supported. + test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} + + if test 1 = "$USE_ANSI_COLORS"; then + # Standard ANSI escape sequences + tc_reset='' + tc_bold=''; tc_standout='' + tc_red=''; tc_green='' + tc_blue=''; tc_cyan='' + else + # Otherwise trust the terminfo database after all. + test -n "`tput sgr0 2>/dev/null`" && { + tc_reset=`tput sgr0` + test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` + tc_standout=$tc_bold + test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` + test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` + test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` + test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` + test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` + } + fi + } - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : + require_term_colors=: } -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} -# func_error arg... -# Echo program name prefixed message to standard error. -func_error () -{ - $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 -} +## ----------------- ## +## Function library. ## +## ----------------- ## -# func_warning arg... -# Echo program name prefixed warning message to standard error. -func_warning () -{ - $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 +# This section contains a variety of useful functions to call in your +# scripts. Take note of the portable wrappers for features provided by +# some modern shells, which will fall back to slower equivalents on +# less featureful shells. - # bash bug again: - : -} -# func_fatal_error arg... -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - func_error ${1+"$@"} - exit $EXIT_FAILURE -} +# func_append VAR VALUE +# --------------------- +# Append VALUE onto the existing contents of VAR. -# func_fatal_help arg... -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - func_error ${1+"$@"} - func_fatal_error "$help" -} -help="Try \`$progname --help' for more information." ## default + # We should try to minimise forks, especially on Windows where they are + # unreasonably slow, so skip the feature probes when bash or zsh are + # being used: + if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then + : ${_G_HAVE_ARITH_OP="yes"} + : ${_G_HAVE_XSI_OPS="yes"} + # The += operator was introduced in bash 3.1 + case $BASH_VERSION in + [12].* | 3.0 | 3.0*) ;; + *) + : ${_G_HAVE_PLUSEQ_OP="yes"} + ;; + esac + fi + # _G_HAVE_PLUSEQ_OP + # Can be empty, in which case the shell is probed, "yes" if += is + # useable or anything else if it does not work. + test -z "$_G_HAVE_PLUSEQ_OP" \ + && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ + && _G_HAVE_PLUSEQ_OP=yes + +if test yes = "$_G_HAVE_PLUSEQ_OP" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_append () + { + $debug_cmd + + eval "$1+=\$2" + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_append () + { + $debug_cmd + + eval "$1=\$$1\$2" + } +fi + + +# func_append_quoted VAR VALUE +# ---------------------------- +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +if test yes = "$_G_HAVE_PLUSEQ_OP"; then + eval 'func_append_quoted () + { + $debug_cmd + + func_quote_for_eval "$2" + eval "$1+=\\ \$func_quote_for_eval_result" + }' +else + func_append_quoted () + { + $debug_cmd + + func_quote_for_eval "$2" + eval "$1=\$$1\\ \$func_quote_for_eval_result" + } +fi + + +# func_append_uniq VAR VALUE +# -------------------------- +# Append unique VALUE onto the existing contents of VAR, assuming +# entries are delimited by the first character of VALUE. For example: +# +# func_append_uniq options " --another-option option-argument" +# +# will only append to $options if " --another-option option-argument " +# is not already present somewhere in $options already (note spaces at +# each end implied by leading space in second argument). +func_append_uniq () +{ + $debug_cmd + + eval _G_current_value='`$ECHO $'$1'`' + _G_delim=`expr "$2" : '\(.\)'` + + case $_G_delim$_G_current_value$_G_delim in + *"$2$_G_delim"*) ;; + *) func_append "$@" ;; + esac +} + + +# func_arith TERM... +# ------------------ +# Set func_arith_result to the result of evaluating TERMs. + test -z "$_G_HAVE_ARITH_OP" \ + && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ + && _G_HAVE_ARITH_OP=yes + +if test yes = "$_G_HAVE_ARITH_OP"; then + eval 'func_arith () + { + $debug_cmd + + func_arith_result=$(( $* )) + }' +else + func_arith () + { + $debug_cmd + + func_arith_result=`expr "$@"` + } +fi + + +# func_basename FILE +# ------------------ +# Set func_basename_result to FILE with everything up to and including +# the last / stripped. +if test yes = "$_G_HAVE_XSI_OPS"; then + # If this shell supports suffix pattern removal, then use it to avoid + # forking. Hide the definitions single quotes in case the shell chokes + # on unsupported syntax... + _b='func_basename_result=${1##*/}' + _d='case $1 in + */*) func_dirname_result=${1%/*}$2 ;; + * ) func_dirname_result=$3 ;; + esac' + +else + # ...otherwise fall back to using sed. + _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' + _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` + if test "X$func_dirname_result" = "X$1"; then + func_dirname_result=$3 + else + func_append func_dirname_result "$2" + fi' +fi + +eval 'func_basename () +{ + $debug_cmd + + '"$_b"' +}' + + +# func_dirname FILE APPEND NONDIR_REPLACEMENT +# ------------------------------------------- +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +eval 'func_dirname () +{ + $debug_cmd -# func_grep expression filename + '"$_d"' +}' + + +# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT +# -------------------------------------------------------- +# Perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# For efficiency, we do not delegate to the functions above but instead +# duplicate the functionality here. +eval 'func_dirname_and_basename () +{ + $debug_cmd + + '"$_b"' + '"$_d"' +}' + + +# func_echo ARG... +# ---------------- +# Echo program name prefixed message. +func_echo () +{ + $debug_cmd + + _G_message=$* + + func_echo_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_IFS + $ECHO "$progname: $_G_line" + done + IFS=$func_echo_IFS +} + + +# func_echo_all ARG... +# -------------------- +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + + +# func_echo_infix_1 INFIX ARG... +# ------------------------------ +# Echo program name, followed by INFIX on the first line, with any +# additional lines not showing INFIX. +func_echo_infix_1 () +{ + $debug_cmd + + $require_term_colors + + _G_infix=$1; shift + _G_indent=$_G_infix + _G_prefix="$progname: $_G_infix: " + _G_message=$* + + # Strip color escape sequences before counting printable length + for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" + do + test -n "$_G_tc" && { + _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` + _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` + } + done + _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes + + func_echo_infix_1_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_infix_1_IFS + $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 + _G_prefix=$_G_indent + done + IFS=$func_echo_infix_1_IFS +} + + +# func_error ARG... +# ----------------- +# Echo program name prefixed message to standard error. +func_error () +{ + $debug_cmd + + $require_term_colors + + func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 +} + + +# func_fatal_error ARG... +# ----------------------- +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + $debug_cmd + + func_error "$*" + exit $EXIT_FAILURE +} + + +# func_grep EXPRESSION FILENAME +# ----------------------------- # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { + $debug_cmd + $GREP "$1" "$2" >/dev/null 2>&1 } -# func_mkdir_p directory-path +# func_len STRING +# --------------- +# Set func_len_result to the length of STRING. STRING may not +# start with a hyphen. + test -z "$_G_HAVE_XSI_OPS" \ + && (eval 'x=a/b/c; + test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ + && _G_HAVE_XSI_OPS=yes + +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_len () + { + $debug_cmd + + func_len_result=${#1} + }' +else + func_len () + { + $debug_cmd + + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` + } +fi + + +# func_mkdir_p DIRECTORY-PATH +# --------------------------- # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { - my_directory_path="$1" - my_dir_list= + $debug_cmd + + _G_directory_path=$1 + _G_dir_list= - if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then - # Protect directory names starting with `-' - case $my_directory_path in - -*) my_directory_path="./$my_directory_path" ;; + # Protect directory names starting with '-' + case $_G_directory_path in + -*) _G_directory_path=./$_G_directory_path ;; esac # While some portion of DIR does not yet exist... - while test ! -d "$my_directory_path"; do + while test ! -d "$_G_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. - my_dir_list="$my_directory_path:$my_dir_list" + _G_dir_list=$_G_directory_path:$_G_dir_list # If the last portion added has no slash in it, the list is done - case $my_directory_path in */*) ;; *) break ;; esac + case $_G_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` done - my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` - save_mkdir_p_IFS="$IFS"; IFS=':' - for my_dir in $my_dir_list; do - IFS="$save_mkdir_p_IFS" - # mkdir can fail with a `File exist' error if two processes + func_mkdir_p_IFS=$IFS; IFS=: + for _G_dir in $_G_dir_list; do + IFS=$func_mkdir_p_IFS + # mkdir can fail with a 'File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! - $MKDIR "$my_dir" 2>/dev/null || : + $MKDIR "$_G_dir" 2>/dev/null || : done - IFS="$save_mkdir_p_IFS" + IFS=$func_mkdir_p_IFS # Bail out if we (or some other process) failed to create a directory. - test -d "$my_directory_path" || \ - func_fatal_error "Failed to create \`$1'" + test -d "$_G_directory_path" || \ + func_fatal_error "Failed to create '$1'" fi } -# func_mktempdir [string] +# func_mktempdir [BASENAME] +# ------------------------- # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If -# given, STRING is the basename for that directory. +# given, BASENAME is the basename for that directory. func_mktempdir () { - my_template="${TMPDIR-/tmp}/${1-$progname}" + $debug_cmd + + _G_template=${TMPDIR-/tmp}/${1-$progname} - if test "$opt_dry_run" = ":"; then + if test : = "$opt_dry_run"; then # Return a directory name, but don't create it in dry-run mode - my_tmpdir="${my_template}-$$" + _G_tmpdir=$_G_template-$$ else # If mktemp works, use that first and foremost - my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` - if test ! -d "$my_tmpdir"; then + if test ! -d "$_G_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" + _G_tmpdir=$_G_template-${RANDOM-0}$$ + + func_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$_G_tmpdir" + umask $func_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$_G_tmpdir" || \ + func_fatal_error "cannot create temporary directory '$_G_tmpdir'" + fi + + $ECHO "$_G_tmpdir" +} + + +# func_normal_abspath PATH +# ------------------------ +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +func_normal_abspath () +{ + $debug_cmd + + # These SED scripts presuppose an absolute path with a trailing slash. + _G_pathcar='s|^/\([^/]*\).*$|\1|' + _G_pathcdr='s|^/[^/]*||' + _G_removedotparts=':dotsl + s|/\./|/|g + t dotsl + s|/\.$|/|' + _G_collapseslashes='s|/\{1,\}|/|g' + _G_finalslash='s|/*$|/|' + + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` + while :; do + # Processed it all yet? + if test / = "$func_normal_abspath_tpath"; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result"; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + + +# func_notquiet ARG... +# -------------------- +# Echo program name prefixed message only when not in quiet mode. +func_notquiet () +{ + $debug_cmd + + $opt_quiet || func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + + +# func_relative_path SRCDIR DSTDIR +# -------------------------------- +# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. +func_relative_path () +{ + $debug_cmd + + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=$func_dirname_result + if test -z "$func_relative_path_tlibdir"; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test -n "$func_stripname_result"; then + func_append func_relative_path_result "/$func_stripname_result" + fi + + # Normalisation. If bindir is libdir, return '.' else relative path. + if test -n "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + fi + + test -n "$func_relative_path_result" || func_relative_path_result=. + + : +} + + +# func_quote_for_eval ARG... +# -------------------------- +# Aesthetically quote ARGs to be evaled later. +# This function returns two values: +# i) func_quote_for_eval_result +# double-quoted, suitable for a subsequent eval +# ii) func_quote_for_eval_unquoted_result +# has all characters that are still active within double +# quotes backslashified. +func_quote_for_eval () +{ + $debug_cmd + + func_quote_for_eval_unquoted_result= + func_quote_for_eval_result= + while test 0 -lt $#; do + case $1 in + *[\\\`\"\$]*) + _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; + *) + _G_unquoted_arg=$1 ;; + esac + if test -n "$func_quote_for_eval_unquoted_result"; then + func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" + else + func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" + fi + + case $_G_unquoted_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and variable expansion + # for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_quoted_arg=\"$_G_unquoted_arg\" + ;; + *) + _G_quoted_arg=$_G_unquoted_arg + ;; + esac + + if test -n "$func_quote_for_eval_result"; then + func_append func_quote_for_eval_result " $_G_quoted_arg" + else + func_append func_quote_for_eval_result "$_G_quoted_arg" + fi + shift + done +} + + +# func_quote_for_expand ARG +# ------------------------- +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + $debug_cmd + + case $1 in + *[\\\`\"]*) + _G_arg=`$ECHO "$1" | $SED \ + -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; + *) + _G_arg=$1 ;; + esac + + case $_G_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_arg=\"$_G_arg\" + ;; + esac + + func_quote_for_expand_result=$_G_arg +} + + +# func_stripname PREFIX SUFFIX NAME +# --------------------------------- +# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_stripname () + { + $debug_cmd + + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary variable first. + func_stripname_result=$3 + func_stripname_result=${func_stripname_result#"$1"} + func_stripname_result=${func_stripname_result%"$2"} + }' +else + func_stripname () + { + $debug_cmd + + case $2 in + .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; + *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; + esac + } +fi + + +# func_show_eval CMD [FAIL_EXP] +# ----------------------------- +# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + $debug_cmd + + _G_cmd=$1 + _G_fail_exp=${2-':'} + + func_quote_for_expand "$_G_cmd" + eval "func_notquiet $func_quote_for_expand_result" + + $opt_dry_run || { + eval "$_G_cmd" + _G_status=$? + if test 0 -ne "$_G_status"; then + eval "(exit $_G_status); $_G_fail_exp" + fi + } +} + + +# func_show_eval_locale CMD [FAIL_EXP] +# ------------------------------------ +# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + $debug_cmd + + _G_cmd=$1 + _G_fail_exp=${2-':'} + + $opt_quiet || { + func_quote_for_expand "$_G_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + $opt_dry_run || { + eval "$_G_user_locale + $_G_cmd" + _G_status=$? + eval "$_G_safe_locale" + if test 0 -ne "$_G_status"; then + eval "(exit $_G_status); $_G_fail_exp" + fi + } +} + + +# func_tr_sh +# ---------- +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + $debug_cmd + + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_verbose ARG... +# ------------------- +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $debug_cmd + + $opt_verbose && func_echo "$*" + + : +} + + +# func_warn_and_continue ARG... +# ----------------------------- +# Echo program name prefixed warning message to standard error. +func_warn_and_continue () +{ + $debug_cmd + + $require_term_colors + + func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 +} + + +# func_warning CATEGORY ARG... +# ---------------------------- +# Echo program name prefixed warning message to standard error. Warning +# messages can be filtered according to CATEGORY, where this function +# elides messages where CATEGORY is not listed in the global variable +# 'opt_warning_types'. +func_warning () +{ + $debug_cmd + + # CATEGORY must be in the warning_categories list! + case " $warning_categories " in + *" $1 "*) ;; + *) func_internal_error "invalid warning category '$1'" ;; + esac + + _G_category=$1 + shift + + case " $opt_warning_types " in + *" $_G_category "*) $warning_func ${1+"$@"} ;; + esac +} + + +# func_sort_ver VER1 VER2 +# ----------------------- +# 'sort -V' is not generally available. +# Note this deviates from the version comparison in automake +# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a +# but this should suffice as we won't be specifying old +# version formats or redundant trailing .0 in bootstrap.conf. +# If we did want full compatibility then we should probably +# use m4_version_compare from autoconf. +func_sort_ver () +{ + $debug_cmd + + printf '%s\n%s\n' "$1" "$2" \ + | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n +} + +# func_lt_ver PREV CURR +# --------------------- +# Return true if PREV and CURR are in the correct order according to +# func_sort_ver, otherwise false. Use it like this: +# +# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." +func_lt_ver () +{ + $debug_cmd + + test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` +} + + +# Local variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-time-zone: "UTC" +# End: +#! /bin/sh + +# Set a version string for this script. +scriptversion=2014-01-07.03; # UTC + +# A portable, pluggable option parser for Bourne shell. +# Written by Gary V. Vaughan, 2010 + +# Copyright (C) 2010-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Please report bugs or propose patches to gary@gnu.org. + + +## ------ ## +## Usage. ## +## ------ ## + +# This file is a library for parsing options in your shell scripts along +# with assorted other useful supporting features that you can make use +# of too. +# +# For the simplest scripts you might need only: +# +# #!/bin/sh +# . relative/path/to/funclib.sh +# . relative/path/to/options-parser +# scriptversion=1.0 +# func_options ${1+"$@"} +# eval set dummy "$func_options_result"; shift +# ...rest of your script... +# +# In order for the '--version' option to work, you will need to have a +# suitably formatted comment like the one at the top of this file +# starting with '# Written by ' and ending with '# warranty; '. +# +# For '-h' and '--help' to work, you will also need a one line +# description of your script's purpose in a comment directly above the +# '# Written by ' line, like the one at the top of this file. +# +# The default options also support '--debug', which will turn on shell +# execution tracing (see the comment above debug_cmd below for another +# use), and '--verbose' and the func_verbose function to allow your script +# to display verbose messages only when your user has specified +# '--verbose'. +# +# After sourcing this file, you can plug processing for additional +# options by amending the variables from the 'Configuration' section +# below, and following the instructions in the 'Option parsing' +# section further down. + +## -------------- ## +## Configuration. ## +## -------------- ## + +# You should override these variables in your script after sourcing this +# file so that they reflect the customisations you have added to the +# option parser. + +# The usage line for option parsing errors and the start of '-h' and +# '--help' output messages. You can embed shell variables for delayed +# expansion at the time the message is displayed, but you will need to +# quote other shell meta-characters carefully to prevent them being +# expanded when the contents are evaled. +usage='$progpath [OPTION]...' + +# Short help message in response to '-h' and '--help'. Add to this or +# override it after sourcing this library to reflect the full set of +# options your script accepts. +usage_message="\ + --debug enable verbose shell tracing + -W, --warnings=CATEGORY + report the warnings falling in CATEGORY [all] + -v, --verbose verbosely report processing + --version print version information and exit + -h, --help print short or long help message and exit +" + +# Additional text appended to 'usage_message' in response to '--help'. +long_help_message=" +Warning categories include: + 'all' show all warnings + 'none' turn off all the warnings + 'error' warnings are treated as fatal errors" + +# Help message printed before fatal option parsing errors. +fatal_help="Try '\$progname --help' for more information." + + + +## ------------------------- ## +## Hook function management. ## +## ------------------------- ## + +# This section contains functions for adding, removing, and running hooks +# to the main code. A hook is just a named list of of function, that can +# be run in order later on. + +# func_hookable FUNC_NAME +# ----------------------- +# Declare that FUNC_NAME will run hooks added with +# 'func_add_hook FUNC_NAME ...'. +func_hookable () +{ + $debug_cmd + + func_append hookable_fns " $1" +} + + +# func_add_hook FUNC_NAME HOOK_FUNC +# --------------------------------- +# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must +# first have been declared "hookable" by a call to 'func_hookable'. +func_add_hook () +{ + $debug_cmd + + case " $hookable_fns " in + *" $1 "*) ;; + *) func_fatal_error "'$1' does not accept hook functions." ;; + esac + + eval func_append ${1}_hooks '" $2"' +} + + +# func_remove_hook FUNC_NAME HOOK_FUNC +# ------------------------------------ +# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. +func_remove_hook () +{ + $debug_cmd + + eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' +} + + +# func_run_hooks FUNC_NAME [ARG]... +# --------------------------------- +# Run all hook functions registered to FUNC_NAME. +# It is assumed that the list of hook functions contains nothing more +# than a whitespace-delimited list of legal shell function names, and +# no effort is wasted trying to catch shell meta-characters or preserve +# whitespace. +func_run_hooks () +{ + $debug_cmd + + case " $hookable_fns " in + *" $1 "*) ;; + *) func_fatal_error "'$1' does not support hook funcions.n" ;; + esac + + eval _G_hook_fns=\$$1_hooks; shift + + for _G_hook in $_G_hook_fns; do + eval $_G_hook '"$@"' + + # store returned options list back into positional + # parameters for next 'cmd' execution. + eval _G_hook_result=\$${_G_hook}_result + eval set dummy "$_G_hook_result"; shift + done + + func_quote_for_eval ${1+"$@"} + func_run_hooks_result=$func_quote_for_eval_result +} + + + +## --------------- ## +## Option parsing. ## +## --------------- ## + +# In order to add your own option parsing hooks, you must accept the +# full positional parameter list in your hook function, remove any +# options that you action, and then pass back the remaining unprocessed +# options in '_result', escaped suitably for +# 'eval'. Like this: +# +# my_options_prep () +# { +# $debug_cmd +# +# # Extend the existing usage message. +# usage_message=$usage_message' +# -s, --silent don'\''t print informational messages +# ' +# +# func_quote_for_eval ${1+"$@"} +# my_options_prep_result=$func_quote_for_eval_result +# } +# func_add_hook func_options_prep my_options_prep +# +# +# my_silent_option () +# { +# $debug_cmd +# +# # Note that for efficiency, we parse as many options as we can +# # recognise in a loop before passing the remainder back to the +# # caller on the first unrecognised argument we encounter. +# while test $# -gt 0; do +# opt=$1; shift +# case $opt in +# --silent|-s) opt_silent=: ;; +# # Separate non-argument short options: +# -s*) func_split_short_opt "$_G_opt" +# set dummy "$func_split_short_opt_name" \ +# "-$func_split_short_opt_arg" ${1+"$@"} +# shift +# ;; +# *) set dummy "$_G_opt" "$*"; shift; break ;; +# esac +# done +# +# func_quote_for_eval ${1+"$@"} +# my_silent_option_result=$func_quote_for_eval_result +# } +# func_add_hook func_parse_options my_silent_option +# +# +# my_option_validation () +# { +# $debug_cmd +# +# $opt_silent && $opt_verbose && func_fatal_help "\ +# '--silent' and '--verbose' options are mutually exclusive." +# +# func_quote_for_eval ${1+"$@"} +# my_option_validation_result=$func_quote_for_eval_result +# } +# func_add_hook func_validate_options my_option_validation +# +# You'll alse need to manually amend $usage_message to reflect the extra +# options you parse. It's preferable to append if you can, so that +# multiple option parsing hooks can be added safely. + + +# func_options [ARG]... +# --------------------- +# All the functions called inside func_options are hookable. See the +# individual implementations for details. +func_hookable func_options +func_options () +{ + $debug_cmd - save_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$my_tmpdir" - umask $save_mktempdir_umask - fi + func_options_prep ${1+"$@"} + eval func_parse_options \ + ${func_options_prep_result+"$func_options_prep_result"} + eval func_validate_options \ + ${func_parse_options_result+"$func_parse_options_result"} - # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || \ - func_fatal_error "cannot create temporary directory \`$my_tmpdir'" - fi + eval func_run_hooks func_options \ + ${func_validate_options_result+"$func_validate_options_result"} - $ECHO "$my_tmpdir" + # save modified positional parameters for caller + func_options_result=$func_run_hooks_result } -# func_quote_for_eval arg -# Aesthetically quote ARG to be evaled later. -# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -# is double-quoted, suitable for a subsequent eval, whereas -# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -# which are still active within double quotes backslashified. -func_quote_for_eval () +# func_options_prep [ARG]... +# -------------------------- +# All initialisations required before starting the option parse loop. +# Note that when calling hook functions, we pass through the list of +# positional parameters. If a hook function modifies that list, and +# needs to propogate that back to rest of this script, then the complete +# modified list must be put in 'func_run_hooks_result' before +# returning. +func_hookable func_options_prep +func_options_prep () { - case $1 in - *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; - *) - func_quote_for_eval_unquoted_result="$1" ;; - esac + $debug_cmd - case $func_quote_for_eval_unquoted_result in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and and variable - # expansion for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" - ;; - *) - func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" - esac + # Option defaults: + opt_verbose=false + opt_warning_types= + + func_run_hooks func_options_prep ${1+"$@"} + + # save modified positional parameters for caller + func_options_prep_result=$func_run_hooks_result } -# func_quote_for_expand arg -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () +# func_parse_options [ARG]... +# --------------------------- +# The main option parsing loop. +func_hookable func_parse_options +func_parse_options () { - case $1 in - *[\\\`\"]*) - my_arg=`$ECHO "$1" | $SED \ - -e "$double_quote_subst" -e "$sed_double_backslash"` ;; - *) - my_arg="$1" ;; - esac + $debug_cmd - case $my_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - my_arg="\"$my_arg\"" - ;; - esac + func_parse_options_result= - func_quote_for_expand_result="$my_arg" -} + # this just eases exit handling + while test $# -gt 0; do + # Defer to hook functions for initial option parsing, so they + # get priority in the event of reusing an option name. + func_run_hooks func_parse_options ${1+"$@"} + # Adjust func_parse_options positional parameters to match + eval set dummy "$func_run_hooks_result"; shift -# func_show_eval cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - my_cmd="$1" - my_fail_exp="${2-:}" + # Break out of the loop if we already parsed every option. + test $# -gt 0 || break - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } + _G_opt=$1 + shift + case $_G_opt in + --debug|-x) debug_cmd='set -x' + func_echo "enabling shell trace mode" + $debug_cmd + ;; + + --no-warnings|--no-warning|--no-warn) + set dummy --warnings none ${1+"$@"} + shift + ;; - if ${opt_dry_run-false}; then :; else - eval "$my_cmd" - my_status=$? - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi + --warnings|--warning|-W) + test $# = 0 && func_missing_arg $_G_opt && break + case " $warning_categories $1" in + *" $1 "*) + # trailing space prevents matching last $1 above + func_append_uniq opt_warning_types " $1" + ;; + *all) + opt_warning_types=$warning_categories + ;; + *none) + opt_warning_types=none + warning_func=: + ;; + *error) + opt_warning_types=$warning_categories + warning_func=func_fatal_error + ;; + *) + func_fatal_error \ + "unsupported warning category: '$1'" + ;; + esac + shift + ;; + + --verbose|-v) opt_verbose=: ;; + --version) func_version ;; + -\?|-h) func_usage ;; + --help) func_help ;; + + # Separate optargs to long options (plugins may need this): + --*=*) func_split_equals "$_G_opt" + set dummy "$func_split_equals_lhs" \ + "$func_split_equals_rhs" ${1+"$@"} + shift + ;; + + # Separate optargs to short options: + -W*) + func_split_short_opt "$_G_opt" + set dummy "$func_split_short_opt_name" \ + "$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-v*|-x*) + func_split_short_opt "$_G_opt" + set dummy "$func_split_short_opt_name" \ + "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; + *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + esac + done + + # save modified positional parameters for caller + func_quote_for_eval ${1+"$@"} + func_parse_options_result=$func_quote_for_eval_result } -# func_show_eval_locale cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () +# func_validate_options [ARG]... +# ------------------------------ +# Perform any sanity checks on option settings and/or unconsumed +# arguments. +func_hookable func_validate_options +func_validate_options () { - my_cmd="$1" - my_fail_exp="${2-:}" + $debug_cmd - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } + # Display all warnings if -W was not given. + test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" - if ${opt_dry_run-false}; then :; else - eval "$lt_user_locale - $my_cmd" - my_status=$? - eval "$lt_safe_locale" - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} + func_run_hooks func_validate_options ${1+"$@"} -# func_tr_sh -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac + # Bail if the options were screwed! + $exit_cmd $EXIT_FAILURE + + # save modified positional parameters for caller + func_validate_options_result=$func_run_hooks_result } -# func_version -# Echo version message to standard output and exit. -func_version () -{ - $opt_debug - $SED -n '/(C)/!b go - :more - /\./!{ - N - s/\n# / / - b more - } - :go - /^# '$PROGRAM' (GNU /,/# warranty; / { - s/^# // - s/^# *$// - s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ - p - }' < "$progpath" - exit $? -} +## ----------------- ## +## Helper functions. ## +## ----------------- ## -# func_usage -# Echo short help message to standard output and exit. -func_usage () +# This section contains the helper functions used by the rest of the +# hookable option parser framework in ascii-betical order. + + +# func_fatal_help ARG... +# ---------------------- +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () { - $opt_debug + $debug_cmd - $SED -n '/^# Usage:/,/^# *.*--help/ { - s/^# // - s/^# *$// - s/\$progname/'$progname'/ - p - }' < "$progpath" - echo - $ECHO "run \`$progname --help | more' for full usage" - exit $? + eval \$ECHO \""Usage: $usage"\" + eval \$ECHO \""$fatal_help"\" + func_error ${1+"$@"} + exit $EXIT_FAILURE } -# func_help [NOEXIT] -# Echo long help message to standard output and exit, -# unless 'noexit' is passed as argument. + +# func_help +# --------- +# Echo long help message to standard output and exit. func_help () { - $opt_debug + $debug_cmd - $SED -n '/^# Usage:/,/# Report bugs to/ { - :print - s/^# // - s/^# *$// - s*\$progname*'$progname'* - s*\$host*'"$host"'* - s*\$SHELL*'"$SHELL"'* - s*\$LTCC*'"$LTCC"'* - s*\$LTCFLAGS*'"$LTCFLAGS"'* - s*\$LD*'"$LD"'* - s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ - p - d - } - /^# .* home page:/b print - /^# General help using/b print - ' < "$progpath" - ret=$? - if test -z "$1"; then - exit $ret - fi + func_usage_message + $ECHO "$long_help_message" + exit 0 } -# func_missing_arg argname + +# func_missing_arg ARGNAME +# ------------------------ # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { - $opt_debug + $debug_cmd - func_error "missing argument for $1." + func_error "Missing argument for '$1'." exit_cmd=exit } -# func_split_short_opt shortopt +# func_split_equals STRING +# ------------------------ +# Set func_split_equals_lhs and func_split_equals_rhs shell variables after +# splitting STRING at the '=' sign. +test -z "$_G_HAVE_XSI_OPS" \ + && (eval 'x=a/b/c; + test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ + && _G_HAVE_XSI_OPS=yes + +if test yes = "$_G_HAVE_XSI_OPS" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_split_equals () + { + $debug_cmd + + func_split_equals_lhs=${1%%=*} + func_split_equals_rhs=${1#*=} + test "x$func_split_equals_lhs" = "x$1" \ + && func_split_equals_rhs= + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_split_equals () + { + $debug_cmd + + func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` + func_split_equals_rhs= + test "x$func_split_equals_lhs" = "x$1" \ + || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` + } +fi #func_split_equals + + +# func_split_short_opt SHORTOPT +# ----------------------------- # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. -func_split_short_opt () +if test yes = "$_G_HAVE_XSI_OPS" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_split_short_opt () + { + $debug_cmd + + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"} + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_split_short_opt () + { + $debug_cmd + + func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` + func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` + } +fi #func_split_short_opt + + +# func_usage +# ---------- +# Echo short help message to standard output and exit. +func_usage () { - my_sed_short_opt='1s/^\(..\).*$/\1/;q' - my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + $debug_cmd - func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` - func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` -} # func_split_short_opt may be replaced by extended shell implementation + func_usage_message + $ECHO "Run '$progname --help |${PAGER-more}' for full usage" + exit 0 +} -# func_split_long_opt longopt -# Set func_split_long_opt_name and func_split_long_opt_arg shell -# variables after splitting LONGOPT at the `=' sign. -func_split_long_opt () +# func_usage_message +# ------------------ +# Echo short help message to standard output. +func_usage_message () { - my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' - my_sed_long_arg='1s/^--[^=]*=//' + $debug_cmd - func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` - func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` -} # func_split_long_opt may be replaced by extended shell implementation + eval \$ECHO \""Usage: $usage"\" + echo + $SED -n 's|^# || + /^Written by/{ + x;p;x + } + h + /^Written by/q' < "$progpath" + echo + eval \$ECHO \""$usage_message"\" +} -exit_cmd=: +# func_version +# ------------ +# Echo version message to standard output and exit. +func_version () +{ + $debug_cmd + printf '%s\n' "$progname $scriptversion" + $SED -n ' + /(C)/!b go + :more + /\./!{ + N + s|\n# | | + b more + } + :go + /^# Written by /,/# warranty; / { + s|^# || + s|^# *$|| + s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| + p + } + /^# Written by / { + s|^# || + p + } + /^warranty; /q' < "$progpath" + exit $? +} -magic="%%%MAGIC variable%%%" -magic_exe="%%%MAGIC EXE variable%%%" +# Local variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-time-zone: "UTC" +# End: -# Global variables. -nonopt= -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 +# Set a version string. +scriptversion='(GNU libtool) 2.4.6' -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () +# func_echo ARG... +# ---------------- +# Libtool also displays the current mode in messages, so override +# funclib.sh func_echo with this custom definition. +func_echo () { - eval "${1}=\$${1}\${2}" -} # func_append may be replaced by extended shell implementation + $debug_cmd -# func_append_quoted var value -# Quote VALUE and append to the end of shell variable VAR, separated -# by a space. -func_append_quoted () -{ - func_quote_for_eval "${2}" - eval "${1}=\$${1}\\ \$func_quote_for_eval_result" -} # func_append_quoted may be replaced by extended shell implementation + _G_message=$* + + func_echo_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_IFS + $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" + done + IFS=$func_echo_IFS +} -# func_arith arithmetic-term... -func_arith () +# func_warning ARG... +# ------------------- +# Libtool warnings are not categorized, so override funclib.sh +# func_warning with this simpler definition. +func_warning () { - func_arith_result=`expr "${@}"` -} # func_arith may be replaced by extended shell implementation + $debug_cmd + $warning_func ${1+"$@"} +} -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` -} # func_len may be replaced by extended shell implementation +## ---------------- ## +## Options parsing. ## +## ---------------- ## + +# Hook in the functions to make sure our own options are parsed during +# the option parsing loop. + +usage='$progpath [OPTION]... [MODE-ARG]...' + +# Short help message in response to '-h'. +usage_message="Options: + --config show all configuration variables + --debug enable verbose shell tracing + -n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --mode=MODE use operation mode MODE + --no-warnings equivalent to '-Wnone' + --preserve-dup-deps don't remove duplicate dependency libraries + --quiet, --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + -v, --verbose print more informational messages than default + --version print version information + -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] + -h, --help, --help-all print short, long, or detailed help message +" -# func_lo2o object -func_lo2o () +# Additional text appended to 'usage_message' in response to '--help'. +func_help () { - func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` -} # func_lo2o may be replaced by extended shell implementation + $debug_cmd + func_usage_message + $ECHO "$long_help_message -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` -} # func_xform may be replaced by extended shell implementation +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. When passed as first option, +'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. +Try '$progname --help --mode=MODE' for a more detailed description of MODE. + +When reporting a bug, please describe a test case to reproduce it and +include the following information: + + host-triplet: $host + shell: $SHELL + compiler: $LTCC + compiler flags: $LTCFLAGS + linker: $LD (gnu? $with_gnu_ld) + version: $progname $scriptversion Debian-2.4.6-2 + automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` + autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` + +Report bugs to . +GNU libtool home page: . +General help using GNU software: ." + exit 0 +} + + +# func_lo2o OBJECT-NAME +# --------------------- +# Transform OBJECT-NAME from a '.lo' suffix to the platform specific +# object suffix. + +lo2o=s/\\.lo\$/.$objext/ +o2lo=s/\\.$objext\$/.lo/ + +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_lo2o () + { + case $1 in + *.lo) func_lo2o_result=${1%.lo}.$objext ;; + * ) func_lo2o_result=$1 ;; + esac + }' + + # func_xform LIBOBJ-OR-SOURCE + # --------------------------- + # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) + # suffix to a '.lo' libtool-object suffix. + eval 'func_xform () + { + func_xform_result=${1%.*}.lo + }' +else + # ...otherwise fall back to using sed. + func_lo2o () + { + func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` + } + + func_xform () + { + func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` + } +fi -# func_fatal_configuration arg... +# func_fatal_configuration ARG... +# ------------------------------- # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { - func_error ${1+"$@"} - func_error "See the $PACKAGE documentation for more information." - func_fatal_error "Fatal configuration error." + func__fatal_error ${1+"$@"} \ + "See the $PACKAGE documentation for more information." \ + "Fatal configuration error." } # func_config +# ----------- # Display the configuration for all the tags in this script. func_config () { @@ -915,17 +2149,19 @@ exit $? } + # func_features +# ------------- # Display the features supported by this script. func_features () { echo "host: $host" - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then echo "enable shared libraries" else echo "disable shared libraries" fi - if test "$build_old_libs" = yes; then + if test yes = "$build_old_libs"; then echo "enable static libraries" else echo "disable static libraries" @@ -934,289 +2170,297 @@ exit $? } -# func_enable_tag tagname + +# func_enable_tag TAGNAME +# ----------------------- # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { - # Global variable: - tagname="$1" + # Global variable: + tagname=$1 - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf="/$re_begincf/,/$re_endcf/p" - - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf=/$re_begincf/,/$re_endcf/p + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac } + # func_check_version_match +# ------------------------ # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF - else - cat >&2 <<_LT_EOF + else + cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF - fi - else - cat >&2 <<_LT_EOF + fi + else + cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF - fi + fi - exit $EXIT_MISMATCH - fi + exit $EXIT_MISMATCH + fi } -# Shorthand for --mode=foo, only valid as the first argument -case $1 in -clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; -compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; -execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; -finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; -install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; -link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; -uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; -esac +# libtool_options_prep [ARG]... +# ----------------------------- +# Preparation for options parsed by libtool. +libtool_options_prep () +{ + $debug_mode + # Option defaults: + opt_config=false + opt_dlopen= + opt_dry_run=false + opt_help=false + opt_mode= + opt_preserve_dup_deps=false + opt_quiet=false + nonopt= + preserve_args= -# Option defaults: -opt_debug=: -opt_dry_run=false -opt_config=false -opt_preserve_dup_deps=false -opt_features=false -opt_finish=false -opt_help=false -opt_help_all=false -opt_silent=: -opt_warning=: -opt_verbose=: -opt_silent=false -opt_verbose=false + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac + # Pass back the list of options. + func_quote_for_eval ${1+"$@"} + libtool_options_prep_result=$func_quote_for_eval_result +} +func_add_hook func_options_prep libtool_options_prep -# Parse options once, thoroughly. This comes as soon as possible in the -# script to make things like `--version' happen as quickly as we can. -{ - # this just eases exit handling - while test $# -gt 0; do - opt="$1" - shift - case $opt in - --debug|-x) opt_debug='set -x' - func_echo "enabling shell trace mode" - $opt_debug - ;; - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - --config) - opt_config=: -func_config - ;; - --dlopen|-dlopen) - optarg="$1" - opt_dlopen="${opt_dlopen+$opt_dlopen -}$optarg" - shift - ;; - --preserve-dup-deps) - opt_preserve_dup_deps=: - ;; - --features) - opt_features=: -func_features - ;; - --finish) - opt_finish=: -set dummy --mode finish ${1+"$@"}; shift - ;; - --help) - opt_help=: - ;; - --help-all) - opt_help_all=: -opt_help=': help-all' - ;; - --mode) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_mode="$optarg" -case $optarg in - # Valid mode arguments: - clean|compile|execute|finish|install|link|relink|uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; -esac - shift - ;; - --no-silent|--no-quiet) - opt_silent=false -func_append preserve_args " $opt" - ;; - --no-warning|--no-warn) - opt_warning=false -func_append preserve_args " $opt" - ;; - --no-verbose) - opt_verbose=false -func_append preserve_args " $opt" - ;; - --silent|--quiet) - opt_silent=: -func_append preserve_args " $opt" - opt_verbose=false - ;; - --verbose|-v) - opt_verbose=: -func_append preserve_args " $opt" -opt_silent=false - ;; - --tag) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_tag="$optarg" -func_append preserve_args " $opt $optarg" -func_enable_tag "$optarg" - shift - ;; - - -\?|-h) func_usage ;; - --help) func_help ;; - --version) func_version ;; - - # Separate optargs to long options: - --*=*) - func_split_long_opt "$opt" - set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} - shift - ;; - - # Separate non-argument short options: - -\?*|-h*|-n*|-v*) - func_split_short_opt "$opt" - set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} - shift - ;; - - --) break ;; - -*) func_fatal_help "unrecognized option \`$opt'" ;; - *) set dummy "$opt" ${1+"$@"}; shift; break ;; - esac - done - # Validate options: +# libtool_parse_options [ARG]... +# --------------------------------- +# Provide handling for libtool specific options. +libtool_parse_options () +{ + $debug_cmd - # save first non-option argument - if test "$#" -gt 0; then - nonopt="$opt" - shift - fi + # Perform our own loop to consume as many options as possible in + # each iteration. + while test $# -gt 0; do + _G_opt=$1 + shift + case $_G_opt in + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + + --config) func_config ;; + + --dlopen|-dlopen) + opt_dlopen="${opt_dlopen+$opt_dlopen +}$1" + shift + ;; + + --preserve-dup-deps) + opt_preserve_dup_deps=: ;; + + --features) func_features ;; + + --finish) set dummy --mode finish ${1+"$@"}; shift ;; + + --help) opt_help=: ;; + + --help-all) opt_help=': help-all' ;; + + --mode) test $# = 0 && func_missing_arg $_G_opt && break + opt_mode=$1 + case $1 in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $_G_opt" + exit_cmd=exit + break + ;; + esac + shift + ;; + + --no-silent|--no-quiet) + opt_quiet=false + func_append preserve_args " $_G_opt" + ;; + + --no-warnings|--no-warning|--no-warn) + opt_warning=false + func_append preserve_args " $_G_opt" + ;; + + --no-verbose) + opt_verbose=false + func_append preserve_args " $_G_opt" + ;; + + --silent|--quiet) + opt_quiet=: + opt_verbose=false + func_append preserve_args " $_G_opt" + ;; + + --tag) test $# = 0 && func_missing_arg $_G_opt && break + opt_tag=$1 + func_append preserve_args " $_G_opt $1" + func_enable_tag "$1" + shift + ;; + + --verbose|-v) opt_quiet=false + opt_verbose=: + func_append preserve_args " $_G_opt" + ;; - # preserve --debug - test "$opt_debug" = : || func_append preserve_args " --debug" + # An option not handled by this hook function: + *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + esac + done - case $host in - *cygwin* | *mingw* | *pw32* | *cegcc*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: - ;; - *) - opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps - ;; - esac - $opt_help || { - # Sanity checks first: - func_check_version_match + # save modified positional parameters for caller + func_quote_for_eval ${1+"$@"} + libtool_parse_options_result=$func_quote_for_eval_result +} +func_add_hook func_parse_options libtool_parse_options - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" - fi - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - # Only execute mode is allowed to have -dlopen flags. - if test -n "$opt_dlopen" && test "$opt_mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE +# libtool_validate_options [ARG]... +# --------------------------------- +# Perform any sanity checks on option settings and/or unconsumed +# arguments. +libtool_validate_options () +{ + # save first non-option argument + if test 0 -lt $#; then + nonopt=$1 + shift fi - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$opt_mode' for more information." - } + # preserve --debug + test : = "$debug_cmd" || func_append preserve_args " --debug" + + case $host in + # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 + # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 + *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + $opt_help || { + # Sanity checks first: + func_check_version_match + + test yes != "$build_libtool_libs" \ + && test yes != "$build_old_libs" \ + && func_fatal_configuration "not configured to build any kind of library" + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test execute != "$opt_mode"; then + func_error "unrecognized option '-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help=$help + help="Try '$progname --help --mode=$opt_mode' for more information." + } - # Bail if the options were screwed - $exit_cmd $EXIT_FAILURE + # Pass back the unparsed argument list + func_quote_for_eval ${1+"$@"} + libtool_validate_options_result=$func_quote_for_eval_result } +func_add_hook func_validate_options libtool_validate_options + +# Process options as early as possible so that --help and --version +# can return quickly. +func_options ${1+"$@"} +eval set dummy "$func_options_result"; shift @@ -1224,24 +2468,52 @@ ## Main. ## ## ----------- ## +magic='%%%MAGIC variable%%%' +magic_exe='%%%MAGIC EXE variable%%%' + +# Global variables. +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# func_generated_by_libtool +# True iff stdin has been generated by Libtool. This function is only +# a basic sanity check; it will hardly flush out determined imposters. +func_generated_by_libtool_p () +{ + $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + # func_lalib_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. +# True iff FILE is a libtool '.la' library or '.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && - $SED -e 4q "$1" 2>/dev/null \ - | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 + $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p } # func_lalib_unsafe_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. +# True iff FILE is a libtool '.la' library or '.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be -# fatal anyway. Works if `file' does not exist. +# fatal anyway. Works if 'file' does not exist. func_lalib_unsafe_p () { lalib_p=no @@ -1249,13 +2521,13 @@ for lalib_p_l in 1 2 3 4 do read lalib_p_line - case "$lalib_p_line" in + case $lalib_p_line in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi - test "$lalib_p" = yes + test yes = "$lalib_p" } # func_ltwrapper_script_p file @@ -1264,7 +2536,8 @@ # determined imposters. func_ltwrapper_script_p () { - func_lalib_p "$1" + test -f "$1" && + $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p } # func_ltwrapper_executable_p file @@ -1289,7 +2562,7 @@ { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper } # func_ltwrapper_p file @@ -1308,11 +2581,13 @@ # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { - $opt_debug + $debug_cmd + save_ifs=$IFS; IFS='~' for cmd in $1; do - IFS=$save_ifs + IFS=$sp$nl eval cmd=\"$cmd\" + IFS=$save_ifs func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs @@ -1324,10 +2599,11 @@ # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing -# `FILE.' does not work on cygwin managed mounts. +# 'FILE.' does not work on cygwin managed mounts. func_source () { - $opt_debug + $debug_cmd + case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; @@ -1354,10 +2630,10 @@ # store the result into func_replace_sysroot_result. func_replace_sysroot () { - case "$lt_sysroot:$1" in + case $lt_sysroot:$1 in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" - func_replace_sysroot_result="=$func_stripname_result" + func_replace_sysroot_result='='$func_stripname_result ;; *) # Including no sysroot. @@ -1374,7 +2650,8 @@ # arg is usually of the form 'gcc ...' func_infer_tag () { - $opt_debug + $debug_cmd + if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do @@ -1393,7 +2670,7 @@ for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. @@ -1418,7 +2695,7 @@ # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with \`--tag'" + func_fatal_error "specify a tag with '--tag'" # else # func_verbose "using $tagname tagged configuration" fi @@ -1434,15 +2711,15 @@ # but don't create it if we're doing a dry run. func_write_libtool_object () { - write_libobj=${1} - if test "$build_libtool_libs" = yes; then - write_lobj=\'${2}\' + write_libobj=$1 + if test yes = "$build_libtool_libs"; then + write_lobj=\'$2\' else write_lobj=none fi - if test "$build_old_libs" = yes; then - write_oldobj=\'${3}\' + if test yes = "$build_old_libs"; then + write_oldobj=\'$3\' else write_oldobj=none fi @@ -1450,7 +2727,7 @@ $opt_dry_run || { cat >${write_libobj}T </dev/null` - if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | - $SED -e "$lt_sed_naive_backslashify"` + $SED -e "$sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi @@ -1514,18 +2792,19 @@ # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { - $opt_debug + $debug_cmd + # unfortunately, winepath doesn't convert paths, only file names - func_convert_core_path_wine_to_w32_result="" + func_convert_core_path_wine_to_w32_result= if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" - if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -n "$func_convert_core_file_wine_to_w32_result"; then if test -z "$func_convert_core_path_wine_to_w32_result"; then - func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi @@ -1554,7 +2833,8 @@ # environment variable; do not put it in $PATH. func_cygpath () { - $opt_debug + $debug_cmd + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then @@ -1563,7 +2843,7 @@ fi else func_cygpath_result= - func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" fi } #end: func_cygpath @@ -1574,10 +2854,11 @@ # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { - $opt_debug + $debug_cmd + # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | - $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` + $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 @@ -1588,13 +2869,14 @@ # func_to_host_file_result to ARG1). func_convert_file_check () { - $opt_debug - if test -z "$2" && test -n "$1" ; then + $debug_cmd + + if test -z "$2" && test -n "$1"; then func_error "Could not determine host file name corresponding to" - func_error " \`$1'" + func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: - func_to_host_file_result="$1" + func_to_host_file_result=$1 fi } # end func_convert_file_check @@ -1606,10 +2888,11 @@ # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { - $opt_debug + $debug_cmd + if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" - func_error " \`$3'" + func_error " '$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. @@ -1618,7 +2901,7 @@ func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else - func_to_host_path_result="$3" + func_to_host_path_result=$3 fi fi } @@ -1630,9 +2913,10 @@ # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { - $opt_debug + $debug_cmd + case $4 in - $1 ) func_to_host_path_result="$3$func_to_host_path_result" + $1 ) func_to_host_path_result=$3$func_to_host_path_result ;; esac case $4 in @@ -1646,7 +2930,7 @@ ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## -# invoked via `$to_host_file_cmd ARG' +# invoked via '$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. @@ -1657,7 +2941,8 @@ # in func_to_host_file_result. func_to_host_file () { - $opt_debug + $debug_cmd + $to_host_file_cmd "$1" } # end func_to_host_file @@ -1669,7 +2954,8 @@ # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { - $opt_debug + $debug_cmd + case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 @@ -1687,7 +2973,7 @@ # Copy ARG to func_to_host_file_result. func_convert_file_noop () { - func_to_host_file_result="$1" + func_to_host_file_result=$1 } # end func_convert_file_noop @@ -1698,11 +2984,12 @@ # func_to_host_file_result. func_convert_file_msys_to_w32 () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" - func_to_host_file_result="$func_convert_core_msys_to_w32_result" + func_to_host_file_result=$func_convert_core_msys_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1714,8 +3001,9 @@ # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. @@ -1731,11 +3019,12 @@ # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" - func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result=$func_convert_core_file_wine_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1747,12 +3036,13 @@ # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" - func_to_host_file_result="$func_cygpath_result" + func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1765,13 +3055,14 @@ # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" - func_to_host_file_result="$func_cygpath_result" + func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1781,7 +3072,7 @@ ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# -# invoked via `$to_host_path_cmd ARG' +# invoked via '$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. @@ -1805,10 +3096,11 @@ to_host_path_cmd= func_init_to_host_path_cmd () { - $opt_debug + $debug_cmd + if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" - to_host_path_cmd="func_convert_path_${func_stripname_result}" + to_host_path_cmd=func_convert_path_$func_stripname_result fi } @@ -1818,7 +3110,8 @@ # in func_to_host_path_result. func_to_host_path () { - $opt_debug + $debug_cmd + func_init_to_host_path_cmd $to_host_path_cmd "$1" } @@ -1829,7 +3122,7 @@ # Copy ARG to func_to_host_path_result. func_convert_path_noop () { - func_to_host_path_result="$1" + func_to_host_path_result=$1 } # end func_convert_path_noop @@ -1840,8 +3133,9 @@ # func_to_host_path_result. func_convert_path_msys_to_w32 () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; @@ -1849,7 +3143,7 @@ func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_to_host_path_result=$func_convert_core_msys_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" @@ -1863,8 +3157,9 @@ # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" @@ -1883,14 +3178,15 @@ # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result=$func_convert_core_path_wine_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" @@ -1904,15 +3200,16 @@ # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" - func_to_host_path_result="$func_cygpath_result" + func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" @@ -1927,8 +3224,9 @@ # func_to_host_file_result. func_convert_path_nix_to_cygwin () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them @@ -1937,7 +3235,7 @@ func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" - func_to_host_path_result="$func_cygpath_result" + func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" @@ -1946,13 +3244,31 @@ # end func_convert_path_nix_to_cygwin +# func_dll_def_p FILE +# True iff FILE is a Windows DLL '.def' file. +# Keep in sync with _LT_DLL_DEF_P in libtool.m4 +func_dll_def_p () +{ + $debug_cmd + + func_dll_def_p_tmp=`$SED -n \ + -e 's/^[ ]*//' \ + -e '/^\(;.*\)*$/d' \ + -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ + -e q \ + "$1"` + test DEF = "$func_dll_def_p_tmp" +} + + # func_mode_compile arg... func_mode_compile () { - $opt_debug + $debug_cmd + # Get the compilation command and the source file. base_compile= - srcfile="$nonopt" # always keep a non-empty value in "srcfile" + srcfile=$nonopt # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal @@ -1965,12 +3281,12 @@ case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile - lastarg="$arg" + lastarg=$arg arg_mode=normal ;; target ) - libobj="$arg" + libobj=$arg arg_mode=normal continue ;; @@ -1980,7 +3296,7 @@ case $arg in -o) test -n "$libobj" && \ - func_fatal_error "you cannot specify \`-o' more than once" + func_fatal_error "you cannot specify '-o' more than once" arg_mode=target continue ;; @@ -2009,12 +3325,12 @@ func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= - save_ifs="$IFS"; IFS=',' + save_ifs=$IFS; IFS=, for arg in $args; do - IFS="$save_ifs" + IFS=$save_ifs func_append_quoted lastarg "$arg" done - IFS="$save_ifs" + IFS=$save_ifs func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result @@ -2027,8 +3343,8 @@ # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # - lastarg="$srcfile" - srcfile="$arg" + lastarg=$srcfile + srcfile=$arg ;; esac # case $arg ;; @@ -2043,13 +3359,13 @@ func_fatal_error "you must specify an argument for -Xcompile" ;; target) - func_fatal_error "you must specify a target with \`-o'" + func_fatal_error "you must specify a target with '-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" - libobj="$func_basename_result" + libobj=$func_basename_result } ;; esac @@ -2069,7 +3385,7 @@ case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) - func_fatal_error "cannot determine name of library object from \`$libobj'" + func_fatal_error "cannot determine name of library object from '$libobj'" ;; esac @@ -2078,8 +3394,8 @@ for arg in $later; do case $arg in -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" + test yes = "$build_libtool_libs" \ + || func_fatal_configuration "cannot build a shared library" build_old_libs=no continue ;; @@ -2105,17 +3421,17 @@ func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && func_warning "libobj name \`$libobj' may not contain shell special characters." + && func_warning "libobj name '$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" - objname="$func_basename_result" - xdir="$func_dirname_result" - lobj=${xdir}$objdir/$objname + objname=$func_basename_result + xdir=$func_dirname_result + lobj=$xdir$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. - if test "$build_old_libs" = yes; then + if test yes = "$build_old_libs"; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" @@ -2127,16 +3443,16 @@ pic_mode=default ;; esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" + if test no = "$compiler_c_o"; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext + lockfile=$output_obj.lock else output_obj= need_locks=no @@ -2145,12 +3461,12 @@ # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then + if test yes = "$need_locks"; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done - elif test "$need_locks" = warn; then + elif test warn = "$need_locks"; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: @@ -2158,7 +3474,7 @@ This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you +your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." @@ -2180,11 +3496,11 @@ qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile - if test "$pic_mode" != no; then + if test no != "$pic_mode"; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code @@ -2201,7 +3517,7 @@ func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - if test "$need_locks" = warn && + if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: @@ -2212,7 +3528,7 @@ This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you +your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." @@ -2228,20 +3544,20 @@ fi # Allow error messages only from the first compilation. - if test "$suppress_opt" = yes; then + if test yes = "$suppress_opt"; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - if test "$pic_mode" != yes; then + if test yes = "$build_old_libs"; then + if test yes != "$pic_mode"; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi - if test "$compiler_c_o" = yes; then + if test yes = "$compiler_c_o"; then func_append command " -o $obj" fi @@ -2250,7 +3566,7 @@ func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - if test "$need_locks" = warn && + if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: @@ -2261,7 +3577,7 @@ This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you +your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." @@ -2281,7 +3597,7 @@ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked - if test "$need_locks" != no; then + if test no != "$need_locks"; then removelist=$lockfile $RM "$lockfile" fi @@ -2291,7 +3607,7 @@ } $opt_help || { - test "$opt_mode" = compile && func_mode_compile ${1+"$@"} + test compile = "$opt_mode" && func_mode_compile ${1+"$@"} } func_mode_help () @@ -2311,7 +3627,7 @@ Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated @@ -2330,16 +3646,16 @@ -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only - -shared do not build a \`.o' file suitable for static linking - -static only build a \`.o' file suitable for static linking + -shared do not build a '.o' file suitable for static linking + -static only build a '.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler -COMPILE-COMMAND is a command to be used in creating a \`standard' object file +COMPILE-COMMAND is a command to be used in creating a 'standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." +SOURCEFILE, then substituting the C source code suffix '.c' with the +library object suffix, '.lo'." ;; execute) @@ -2352,7 +3668,7 @@ -dlopen FILE add the directory containing FILE to the library path -This mode sets the library path environment variable according to \`-dlopen' +This mode sets the library path environment variable according to '-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated @@ -2371,7 +3687,7 @@ Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." +the '--dry-run' option if you just want to see what would be executed." ;; install) @@ -2381,7 +3697,7 @@ Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. +either the 'install' or 'cp' program. The following components of INSTALL-COMMAND are treated specially: @@ -2407,7 +3723,7 @@ -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE @@ -2421,7 +3737,8 @@ -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects + -objectlist FILE use a list of object files found in FILE to specify objects + -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information @@ -2441,20 +3758,20 @@ -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) -All other options (arguments beginning with \`-') are ignored. +All other options (arguments beginning with '-') are ignored. -Every other argument is treated as a filename. Files ending in \`.la' are +Every other argument is treated as a filename. Files ending in '.la' are treated as uninstalled libtool libraries, other files are standard or library object files. -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is +If the OUTPUT-FILE ends in '.la', then a libtool library is created, +only library objects ('.lo' files) may be specified, and '-rpath' is required, except when creating a convenience library. -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. +If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created +using 'ar' and 'ranlib', or on Windows using 'lib'. -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file is created, otherwise an executable program is created." ;; @@ -2465,7 +3782,7 @@ Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. @@ -2473,17 +3790,17 @@ ;; *) - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode '$opt_mode'" ;; esac echo - $ECHO "Try \`$progname --help' for more information about other modes." + $ECHO "Try '$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then - if test "$opt_help" = :; then + if test : = "$opt_help"; then func_mode_help else { @@ -2491,7 +3808,7 @@ for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done - } | sed -n '1p; 2,$s/^Usage:/ or: /p' + } | $SED -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do @@ -2499,7 +3816,7 @@ func_mode_help done } | - sed '1d + $SED '1d /^When reporting/,/^Report/{ H d @@ -2516,16 +3833,17 @@ # func_mode_execute arg... func_mode_execute () { - $opt_debug + $debug_cmd + # The first argument is the command name. - cmd="$nonopt" + cmd=$nonopt test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ - || func_fatal_help "\`$file' is not a file" + || func_fatal_help "'$file' is not a file" dir= case $file in @@ -2535,7 +3853,7 @@ # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$lib' is not a valid libtool archive" + || func_fatal_help "'$lib' is not a valid libtool archive" # Read the libtool library. dlname= @@ -2546,18 +3864,18 @@ if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ - func_warning "\`$file' was not linked with \`-export-dynamic'" + func_warning "'$file' was not linked with '-export-dynamic'" continue fi func_dirname "$file" "" "." - dir="$func_dirname_result" + dir=$func_dirname_result if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" fi fi ;; @@ -2565,18 +3883,18 @@ *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." - dir="$func_dirname_result" + dir=$func_dirname_result ;; *) - func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + func_warning "'-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" + test -n "$absdir" && dir=$absdir # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then @@ -2588,7 +3906,7 @@ # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. - libtool_execute_magic="$magic" + libtool_execute_magic=$magic # Check if any of the arguments is a wrapper script. args= @@ -2601,12 +3919,12 @@ if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. - file="$progdir/$program" + file=$progdir/$program elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. - file="$progdir/$program" + file=$progdir/$program fi ;; esac @@ -2614,7 +3932,15 @@ func_append_quoted args "$file" done - if test "X$opt_dry_run" = Xfalse; then + if $opt_dry_run; then + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + else if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" @@ -2631,25 +3957,18 @@ done # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - echo "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS + exec_cmd=\$cmd$args fi } -test "$opt_mode" = execute && func_mode_execute ${1+"$@"} +test execute = "$opt_mode" && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { - $opt_debug + $debug_cmd + libs= libdirs= admincmds= @@ -2663,11 +3982,11 @@ if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else - func_warning "\`$opt' is not a valid libtool archive" + func_warning "'$opt' is not a valid libtool archive" fi else - func_fatal_error "invalid argument \`$opt'" + func_fatal_error "invalid argument '$opt'" fi done @@ -2682,12 +4001,12 @@ # Remove sysroot references if $opt_dry_run; then for lib in $libs; do - echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + echo "removing references to $lt_sysroot and '=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do - sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done @@ -2712,7 +4031,7 @@ fi # Exit here if they wanted silent mode. - $opt_silent && exit $EXIT_SUCCESS + $opt_quiet && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" @@ -2723,27 +4042,27 @@ echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "specify the full pathname of the library, or use the '-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " - add LIBDIR to the '$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " - add LIBDIR to the '$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" - $ECHO " - use the \`$flag' linker flag" + $ECHO " - use the '$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" fi echo @@ -2762,18 +4081,20 @@ exit $EXIT_SUCCESS } -test "$opt_mode" = finish && func_mode_finish ${1+"$@"} +test finish = "$opt_mode" && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { - $opt_debug + $debug_cmd + # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || # Allow the use of GNU shtool's install command. - case $nonopt in *shtool*) :;; *) false;; esac; then + case $nonopt in *shtool*) :;; *) false;; esac + then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " @@ -2800,7 +4121,7 @@ opts= prev= install_type= - isdir=no + isdir=false stripme= no_mode=: for arg @@ -2813,7 +4134,7 @@ fi case $arg in - -d) isdir=yes ;; + -d) isdir=: ;; -f) if $install_cp; then :; else prev=$arg @@ -2831,7 +4152,7 @@ *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then - if test "x$prev" = x-m && test -n "$install_override_mode"; then + if test X-m = "X$prev" && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi @@ -2856,7 +4177,7 @@ func_fatal_help "you must specify an install program" test -n "$prev" && \ - func_fatal_help "the \`$prev' option requires an argument" + func_fatal_help "the '$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else @@ -2878,19 +4199,19 @@ dest=$func_stripname_result # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" + test -d "$dest" && isdir=: + if $isdir; then + destdir=$dest destname= else func_dirname_and_basename "$dest" "" "." - destdir="$func_dirname_result" - destname="$func_basename_result" + destdir=$func_dirname_result + destname=$func_basename_result # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ - func_fatal_help "\`$dest' is not a directory" + func_fatal_help "'$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; @@ -2899,7 +4220,7 @@ case $file in *.lo) ;; *) - func_fatal_help "\`$destdir' must be an absolute directory name" + func_fatal_help "'$destdir' must be an absolute directory name" ;; esac done @@ -2908,7 +4229,7 @@ # This variable tells wrapper scripts just to set variables rather # than running their programs. - libtool_install_magic="$magic" + libtool_install_magic=$magic staticlibs= future_libdirs= @@ -2928,7 +4249,7 @@ # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$file' is not a valid libtool archive" + || func_fatal_help "'$file' is not a valid libtool archive" library_names= old_library= @@ -2950,7 +4271,7 @@ fi func_dirname "$file" "/" "" - dir="$func_dirname_result" + dir=$func_dirname_result func_append dir "$objdir" if test -n "$relink_command"; then @@ -2964,7 +4285,7 @@ # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. @@ -2973,29 +4294,36 @@ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi - func_warning "relinking \`$file'" + func_warning "relinking '$file'" func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then - realname="$1" + realname=$1 shift - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T + srcname=$realname + test -n "$relink_command" && srcname=${realname}T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' - tstripme="$stripme" + tstripme=$stripme case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) - tstripme="" + tstripme= + ;; + esac + ;; + os2*) + case $realname in + *_dll.a) + tstripme= ;; esac ;; @@ -3006,7 +4334,7 @@ if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on + # Try 'ln -sf' first, because the 'ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname @@ -3017,14 +4345,14 @@ fi # Do each command in the postinstall commands. - lib="$destdir/$realname" + lib=$destdir/$realname func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" - name="$func_basename_result" - instname="$dir/$name"i + name=$func_basename_result + instname=$dir/${name}i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. @@ -3036,11 +4364,11 @@ # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then - destfile="$destdir/$destname" + destfile=$destdir/$destname else func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" + destfile=$func_basename_result + destfile=$destdir/$destfile fi # Deduce the name of the destination old-style object file. @@ -3050,11 +4378,11 @@ staticdest=$func_lo2o_result ;; *.$objext) - staticdest="$destfile" + staticdest=$destfile destfile= ;; *) - func_fatal_help "cannot copy a libtool object to \`$destfile'" + func_fatal_help "cannot copy a libtool object to '$destfile'" ;; esac @@ -3063,7 +4391,7 @@ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. - if test "$build_old_libs" = yes; then + if test yes = "$build_old_libs"; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result @@ -3075,23 +4403,23 @@ *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then - destfile="$destdir/$destname" + destfile=$destdir/$destname else func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" + destfile=$func_basename_result + destfile=$destdir/$destfile fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install - stripped_ext="" + stripped_ext= case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result - stripped_ext=".exe" + stripped_ext=.exe fi ;; esac @@ -3119,19 +4447,19 @@ # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script \`$wrapper'" + func_fatal_error "invalid libtool wrapper script '$wrapper'" - finalize=yes + finalize=: for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi - libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "\`$lib' has not been installed in \`$libdir'" - finalize=no + func_warning "'$lib' has not been installed in '$libdir'" + finalize=false fi done @@ -3139,29 +4467,29 @@ func_source "$wrapper" outputname= - if test "$fast_install" = no && test -n "$relink_command"; then + if test no = "$fast_install" && test -n "$relink_command"; then $opt_dry_run || { - if test "$finalize" = yes; then + if $finalize; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" - file="$func_basename_result" - outputname="$tmpdir/$file" + file=$func_basename_result + outputname=$tmpdir/$file # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` - $opt_silent || { + $opt_quiet || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else - func_error "error: relink \`$file' with the above command before installing it" + func_error "error: relink '$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi - file="$outputname" + file=$outputname else - func_warning "cannot relink \`$file'" + func_warning "cannot relink '$file'" fi } else @@ -3198,10 +4526,10 @@ for file in $staticlibs; do func_basename "$file" - name="$func_basename_result" + name=$func_basename_result # Set up the ranlib parameters. - oldlib="$destdir/$name" + oldlib=$destdir/$name func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result @@ -3216,18 +4544,18 @@ done test -n "$future_libdirs" && \ - func_warning "remember to run \`$progname --finish$future_libdirs'" + func_warning "remember to run '$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } -test "$opt_mode" = install && func_mode_install ${1+"$@"} +test install = "$opt_mode" && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p @@ -3235,16 +4563,17 @@ # a dlpreopen symbol table. func_generate_dlsyms () { - $opt_debug - my_outputname="$1" - my_originator="$2" - my_pic_p="${3-no}" - my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + $debug_cmd + + my_outputname=$1 + my_originator=$2 + my_pic_p=${3-false} + my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms="${my_outputname}S.c" + my_dlsyms=${my_outputname}S.c else func_error "not configured to extract global symbols from dlpreopened files" fi @@ -3255,7 +4584,7 @@ "") ;; *.c) # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${my_outputname}.nm" + nlist=$output_objdir/$my_outputname.nm func_show_eval "$RM $nlist ${nlist}S ${nlist}T" @@ -3263,34 +4592,36 @@ func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ +/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif -#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST -#elif defined(__osf__) +#elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif +#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) + /* External symbol declarations for the compiler. */\ " - if test "$dlself" = yes; then - func_verbose "generating symbol list for \`$output'" + if test yes = "$dlself"; then + func_verbose "generating symbol list for '$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" @@ -3298,7 +4629,7 @@ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 - func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + func_verbose "extracting global C symbols from '$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done @@ -3318,10 +4649,10 @@ # Prepare the list of exported symbols if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" + export_symbols=$output_objdir/$outputname.exp $opt_dry_run || { $RM $export_symbols - eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' @@ -3331,7 +4662,7 @@ } else $opt_dry_run || { - eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in @@ -3345,22 +4676,22 @@ fi for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from \`$dlprefile'" + func_verbose "extracting global C symbols from '$dlprefile'" func_basename "$dlprefile" - name="$func_basename_result" + name=$func_basename_result case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" - dlprefile_dlbasename="" + dlprefile_dlbasename= if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` - if test -n "$dlprefile_dlname" ; then + if test -n "$dlprefile_dlname"; then func_basename "$dlprefile_dlname" - dlprefile_dlbasename="$func_basename_result" + dlprefile_dlbasename=$func_basename_result else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" @@ -3368,7 +4699,7 @@ fi fi $opt_dry_run || { - if test -n "$dlprefile_dlbasename" ; then + if test -n "$dlprefile_dlbasename"; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" @@ -3424,6 +4755,11 @@ echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi + func_show_eval '$RM "${nlist}I"' + if test -n "$global_symbol_to_import"; then + eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' + fi + echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ @@ -3432,11 +4768,30 @@ void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[]; +lt_${my_prefix}_LTX_preloaded_symbols[];\ +" + + if test -s "$nlist"I; then + echo >> "$output_objdir/$my_dlsyms" "\ +static void lt_syminit(void) +{ + LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; + for (; symbol->name; ++symbol) + {" + $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" + echo >> "$output_objdir/$my_dlsyms" "\ + } +}" + fi + echo >> "$output_objdir/$my_dlsyms" "\ LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = -{\ - { \"$my_originator\", (void *) 0 }," +{ {\"$my_originator\", (void *) 0}," + + if test -s "$nlist"I; then + echo >> "$output_objdir/$my_dlsyms" "\ + {\"@INIT@\", (void *) <_syminit}," + fi case $need_lib_prefix in no) @@ -3478,9 +4833,7 @@ *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) - if test "X$my_pic_p" != Xno; then - pic_flag_for_symtable=" $pic_flag" - fi + $my_pic_p && pic_flag_for_symtable=" $pic_flag" ;; esac ;; @@ -3497,10 +4850,10 @@ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' # Transform the symbol file into the correct name. - symfileobj="$output_objdir/${my_outputname}S.$objext" + symfileobj=$output_objdir/${my_outputname}S.$objext case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then @@ -3518,7 +4871,7 @@ esac ;; *) - func_fatal_error "unknown suffix for \`$my_dlsyms'" + func_fatal_error "unknown suffix for '$my_dlsyms'" ;; esac else @@ -3532,6 +4885,32 @@ fi } +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $debug_cmd + + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $debug_cmd + + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + # func_win32_libid arg # return the library type of file 'arg' # @@ -3541,8 +4920,9 @@ # Despite the name, also deal with 64 bit binaries. func_win32_libid () { - $opt_debug - win32_libid_type="unknown" + $debug_cmd + + win32_libid_type=unknown win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import @@ -3552,16 +4932,29 @@ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then - func_to_tool_file "$1" func_convert_file_msys_to_w32 - win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | - $SED -n -e ' + case $nm_interface in + "MS dumpbin") + if func_cygming_ms_implib_p "$1" || + func_cygming_gnu_implib_p "$1" + then + win32_nmres=import + else + win32_nmres= + fi + ;; + *) + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' 1,100{ / I /{ - s,.*,import, + s|.*|import| p q } }'` + ;; + esac case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; @@ -3593,7 +4986,8 @@ # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { - $opt_debug + $debug_cmd + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } @@ -3610,7 +5004,8 @@ # specified import library. func_cygming_dll_for_implib_fallback_core () { - $opt_debug + $debug_cmd + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ @@ -3646,8 +5041,8 @@ /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the - # archive which possess that section. Heuristic: eliminate - # all those which have a first or second character that is + # archive that possess that section. Heuristic: eliminate + # all those that have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually @@ -3658,30 +5053,6 @@ $SED -e '/^\./d;/^.\./d;q' } -# func_cygming_gnu_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is a GNU/binutils-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_gnu_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` - test -n "$func_cygming_gnu_implib_tmp" -} - -# func_cygming_ms_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is an MS-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_ms_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` - test -n "$func_cygming_ms_implib_tmp" -} - # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified @@ -3695,16 +5066,17 @@ # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { - $opt_debug - if func_cygming_gnu_implib_p "$1" ; then + $debug_cmd + + if func_cygming_gnu_implib_p "$1"; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` - elif func_cygming_ms_implib_p "$1" ; then + elif func_cygming_ms_implib_p "$1"; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown - sharedlib_from_linklib_result="" + sharedlib_from_linklib_result= fi } @@ -3712,10 +5084,11 @@ # func_extract_an_archive dir oldlib func_extract_an_archive () { - $opt_debug - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" - if test "$lock_old_archive_extraction" = yes; then + $debug_cmd + + f_ex_an_ar_dir=$1; shift + f_ex_an_ar_oldlib=$1 + if test yes = "$lock_old_archive_extraction"; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" @@ -3724,7 +5097,7 @@ fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' - if test "$lock_old_archive_extraction" = yes; then + if test yes = "$lock_old_archive_extraction"; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then @@ -3738,22 +5111,23 @@ # func_extract_archives gentop oldlib ... func_extract_archives () { - $opt_debug - my_gentop="$1"; shift + $debug_cmd + + my_gentop=$1; shift my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" + my_oldobjs= + my_xlib= + my_xabs= + my_xdir= for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" - my_xlib="$func_basename_result" + my_xlib=$func_basename_result my_xlib_u=$my_xlib while :; do case " $extracted_archives " in @@ -3765,7 +5139,7 @@ esac done extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" + my_xdir=$my_gentop/$my_xlib_u func_mkdir_p "$my_xdir" @@ -3778,22 +5152,23 @@ cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` - darwin_base_archive=`basename "$darwin_archive"` + func_basename "$darwin_archive" + darwin_base_archive=$func_basename_result darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" + for darwin_arch in $darwin_arches; do + func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" + $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" + cd "unfat-$$/$darwin_base_archive-$darwin_arch" + func_extract_an_archive "`pwd`" "$darwin_base_archive" cd "$darwin_curdir" - $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do @@ -3815,7 +5190,7 @@ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done - func_extract_archives_result="$my_oldobjs" + func_extract_archives_result=$my_oldobjs } @@ -3830,7 +5205,7 @@ # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is +# will assume that the directory where it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () @@ -3841,7 +5216,7 @@ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. @@ -3898,9 +5273,9 @@ # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper -# /script/ and the wrapper /executable/ which is used only on +# /script/ and the wrapper /executable/ that is used only on # windows platforms, and (c) all begin with the string "--lt-" -# (application programs are unlikely to have options which match +# (application programs are unlikely to have options that match # this pattern). # # There are only two supported options: --lt-debug and @@ -3933,7 +5308,7 @@ # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then - echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 fi } @@ -3944,7 +5319,7 @@ lt_dump_args_N=1; for lt_arg do - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } @@ -3958,7 +5333,7 @@ *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} @@ -3968,7 +5343,7 @@ *) $ECHO "\ if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} @@ -4043,13 +5418,13 @@ test -n \"\$absdir\" && thisdir=\"\$absdir\" " - if test "$fast_install" = yes; then + if test yes = "$fast_install"; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" @@ -4066,7 +5441,7 @@ if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else - $ECHO \"\$relink_command_output\" >&2 + \$ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi @@ -4101,7 +5476,7 @@ fi # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" @@ -4121,7 +5496,7 @@ fi else # The program doesn't exist. - \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 @@ -4140,7 +5515,7 @@ cat < #include +#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) + /* declarations of non-ANSI functions */ -#if defined(__MINGW32__) +#if defined __MINGW32__ # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif -#elif defined(__CYGWIN__) +#elif defined __CYGWIN__ # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif -/* #elif defined (other platforms) ... */ +/* #elif defined other_platform || defined ... */ #endif /* portability defines, excluding path handling macros */ -#if defined(_MSC_VER) +#if defined _MSC_VER # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC -# ifndef _INTPTR_T_DEFINED -# define _INTPTR_T_DEFINED -# define intptr_t int -# endif -#elif defined(__MINGW32__) +#elif defined __MINGW32__ # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv -#elif defined(__CYGWIN__) +#elif defined __CYGWIN__ # define HAVE_SETENV # define FOPEN_WB "wb" -/* #elif defined (other platforms) ... */ +/* #elif defined other platforms ... */ #endif -#if defined(PATH_MAX) +#if defined PATH_MAX # define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) +#elif defined MAXPATHLEN # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 @@ -4234,8 +5607,8 @@ # define PATH_SEPARATOR ':' #endif -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) +#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ + defined __OS2__ # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 @@ -4268,10 +5641,10 @@ #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ + if (stale) { free (stale); stale = 0; } \ } while (0) -#if defined(LT_DEBUGWRAPPER) +#if defined LT_DEBUGWRAPPER static int lt_debug = 1; #else static int lt_debug = 0; @@ -4300,11 +5673,16 @@ EOF cat < 0) && IS_PATH_SEPARATOR (new_value[len-1])) + size_t len = strlen (new_value); + while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { - new_value[len-1] = '\0'; + new_value[--len] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); @@ -5082,27 +6460,47 @@ # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { - $opt_debug + $debug_cmd + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } +# func_suncc_cstd_abi +# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! +# Several compiler flags select an ABI that is incompatible with the +# Cstd library. Avoid specifying it if any are in CXXFLAGS. +func_suncc_cstd_abi () +{ + $debug_cmd + + case " $compile_command " in + *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) + suncc_use_cstd_abi=no + ;; + *) + suncc_use_cstd_abi=yes + ;; + esac +} + # func_mode_link arg... func_mode_link () { - $opt_debug + $debug_cmd + case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra + # what system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not + # to make a dll that has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. @@ -5146,10 +6544,11 @@ module=no no_install=no objs= + os2dllname= non_pic_objects= precious_files_regex= prefer_static_libs=no - preload=no + preload=false prev= prevarg= release= @@ -5161,7 +6560,7 @@ vinfo= vinfo_number=no weak_libs= - single_module="${wl}-single_module" + single_module=$wl-single_module func_infer_tag $base_compile # We need to know -static, to get the right output filenames. @@ -5169,15 +6568,15 @@ do case $arg in -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" + test yes != "$build_libtool_libs" \ + && func_fatal_configuration "cannot build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) - if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then @@ -5210,7 +6609,7 @@ # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do - arg="$1" + arg=$1 shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result @@ -5227,21 +6626,21 @@ case $prev in bindir) - bindir="$arg" + bindir=$arg prev= continue ;; dlfiles|dlprefiles) - if test "$preload" = no; then + $preload || { # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" - preload=yes - fi + preload=: + } case $arg in *.la | *.lo) ;; # We handle these cases below. force) - if test "$dlself" = no; then + if test no = "$dlself"; then dlself=needless export_dynamic=yes fi @@ -5249,9 +6648,9 @@ continue ;; self) - if test "$prev" = dlprefiles; then + if test dlprefiles = "$prev"; then dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then dlself=yes else dlself=needless @@ -5261,7 +6660,7 @@ continue ;; *) - if test "$prev" = dlfiles; then + if test dlfiles = "$prev"; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" @@ -5272,14 +6671,14 @@ esac ;; expsyms) - export_symbols="$arg" + export_symbols=$arg test -f "$arg" \ - || func_fatal_error "symbol file \`$arg' does not exist" + || func_fatal_error "symbol file '$arg' does not exist" prev= continue ;; expsyms_regex) - export_symbols_regex="$arg" + export_symbols_regex=$arg prev= continue ;; @@ -5297,7 +6696,13 @@ continue ;; inst_prefix) - inst_prefix_dir="$arg" + inst_prefix_dir=$arg + prev= + continue + ;; + mllvm) + # Clang does not use LLVM to link, so we can simply discard any + # '-mllvm $arg' options when doing the link step. prev= continue ;; @@ -5321,21 +6726,21 @@ if test -z "$pic_object" || test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" + test none = "$pic_object" && + test none = "$non_pic_object"; then + func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result - if test "$pic_object" != none; then + if test none != "$pic_object"; then # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" + pic_object=$xdir$pic_object - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + if test dlfiles = "$prev"; then + if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue @@ -5346,7 +6751,7 @@ fi # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then + if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= @@ -5354,23 +6759,23 @@ # A PIC object. func_append libobjs " $pic_object" - arg="$pic_object" + arg=$pic_object fi # Non-PIC object. - if test "$non_pic_object" != none; then + if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" + non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" + if test -z "$pic_object" || test none = "$pic_object"; then + arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" + non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else @@ -5378,7 +6783,7 @@ if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result @@ -5386,24 +6791,29 @@ func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else - func_fatal_error "\`$arg' is not a valid libtool object" + func_fatal_error "'$arg' is not a valid libtool object" fi fi done else - func_fatal_error "link input file \`$arg' does not exist" + func_fatal_error "link input file '$arg' does not exist" fi arg=$save_arg prev= continue ;; + os2dllname) + os2dllname=$arg + prev= + continue + ;; precious_regex) - precious_files_regex="$arg" + precious_files_regex=$arg prev= continue ;; release) - release="-$arg" + release=-$arg prev= continue ;; @@ -5415,7 +6825,7 @@ func_fatal_error "only absolute run-paths are allowed" ;; esac - if test "$prev" = rpath; then + if test rpath = "$prev"; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; @@ -5430,7 +6840,7 @@ continue ;; shrext) - shrext_cmds="$arg" + shrext_cmds=$arg prev= continue ;; @@ -5470,7 +6880,7 @@ esac fi # test -n "$prev" - prevarg="$arg" + prevarg=$arg case $arg in -all-static) @@ -5484,7 +6894,7 @@ -allow-undefined) # FIXME: remove this flag sometime in the future. - func_fatal_error "\`-allow-undefined' must not be used because it is the default" + func_fatal_error "'-allow-undefined' must not be used because it is the default" ;; -avoid-version) @@ -5516,7 +6926,7 @@ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi - if test "X$arg" = "X-export-symbols"; then + if test X-export-symbols = "X$arg"; then prev=expsyms else prev=expsyms_regex @@ -5550,9 +6960,9 @@ func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then - func_fatal_error "require no space between \`-L' and \`$1'" + func_fatal_error "require no space between '-L' and '$1'" else - func_fatal_error "need path for \`-L' option" + func_fatal_error "need path for '-L' option" fi fi func_resolve_sysroot "$func_stripname_result" @@ -5563,8 +6973,8 @@ *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of \`$dir'" - dir="$absdir" + func_fatal_error "cannot determine absolute directory name of '$dir'" + dir=$absdir ;; esac case "$deplibs " in @@ -5599,7 +7009,7 @@ ;; -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + if test X-lc = "X$arg" || test X-lm = "X$arg"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) @@ -5607,11 +7017,11 @@ ;; *-*-os2*) # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework @@ -5620,16 +7030,16 @@ ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; esac - elif test "X$arg" = "X-lc_r"; then + elif test X-lc_r = "X$arg"; then case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc_r directly, use -pthread flag. continue ;; @@ -5639,6 +7049,11 @@ continue ;; + -mllvm) + prev=mllvm + continue + ;; + -module) module=yes continue @@ -5668,7 +7083,7 @@ ;; -multi_module) - single_module="${wl}-multi_module" + single_module=$wl-multi_module continue ;; @@ -5682,8 +7097,8 @@ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. - func_warning "\`-no-install' is ignored for $host" - func_warning "assuming \`-no-fast-install' instead" + func_warning "'-no-install' is ignored for $host" + func_warning "assuming '-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; @@ -5701,6 +7116,11 @@ continue ;; + -os2dllname) + prev=os2dllname + continue + ;; + -o) prev=output ;; -precious-files-regex) @@ -5788,14 +7208,14 @@ func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= - save_ifs="$IFS"; IFS=',' + save_ifs=$IFS; IFS=, for flag in $args; do - IFS="$save_ifs" + IFS=$save_ifs func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done - IFS="$save_ifs" + IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; @@ -5804,15 +7224,15 @@ func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= - save_ifs="$IFS"; IFS=',' + save_ifs=$IFS; IFS=, for flag in $args; do - IFS="$save_ifs" + IFS=$save_ifs func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done - IFS="$save_ifs" + IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; @@ -5835,7 +7255,7 @@ # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result ;; # Flags to be passed through unchanged, with rationale: @@ -5847,25 +7267,49 @@ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # -fstack-protector* stack protector flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support - # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -specs=* GCC specs files + # -stdlib=* select c++ std lib with clang + # -fsanitize=* Clang/GCC memory and address sanitizer -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \ + -specs=*|-fsanitize=*) func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; + -Z*) + if test os2 = "`expr $host : '.*\(os2\)'`"; then + # OS/2 uses -Zxxx to specify OS/2-specific options + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case $arg in + -Zlinker | -Zstack) + prev=xcompiler + ;; + esac + continue + else + # Otherwise treat like 'Some other compiler flag' below + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + fi + ;; + # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result ;; *.$objext) @@ -5886,21 +7330,21 @@ if test -z "$pic_object" || test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" + test none = "$pic_object" && + test none = "$non_pic_object"; then + func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result - if test "$pic_object" != none; then + test none = "$pic_object" || { # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" + pic_object=$xdir$pic_object - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + if test dlfiles = "$prev"; then + if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue @@ -5911,7 +7355,7 @@ fi # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then + if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= @@ -5919,23 +7363,23 @@ # A PIC object. func_append libobjs " $pic_object" - arg="$pic_object" - fi + arg=$pic_object + } # Non-PIC object. - if test "$non_pic_object" != none; then + if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" + non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" + if test -z "$pic_object" || test none = "$pic_object"; then + arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" + non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else @@ -5943,7 +7387,7 @@ if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result @@ -5951,7 +7395,7 @@ func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else - func_fatal_error "\`$arg' is not a valid libtool object" + func_fatal_error "'$arg' is not a valid libtool object" fi fi ;; @@ -5967,11 +7411,11 @@ # A libtool-controlled library. func_resolve_sysroot "$arg" - if test "$prev" = dlfiles; then + if test dlfiles = "$prev"; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= - elif test "$prev" = dlprefiles; then + elif test dlprefiles = "$prev"; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= @@ -5986,7 +7430,7 @@ # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result ;; esac # arg @@ -5998,9 +7442,9 @@ done # argument parsing loop test -n "$prev" && \ - func_fatal_help "the \`$prevarg' option requires an argument" + func_fatal_help "the '$prevarg' option requires an argument" - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" @@ -6009,20 +7453,23 @@ oldlibs= # calculate the name of the file, without its directory func_basename "$output" - outputname="$func_basename_result" - libobjs_save="$libobjs" + outputname=$func_basename_result + libobjs_save=$libobjs if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + # Definition is injected by LT_CONFIG during libtool generation. + func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH" + func_dirname "$output" "/" "" - output_objdir="$func_dirname_result$objdir" + output_objdir=$func_dirname_result$objdir func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. @@ -6045,7 +7492,7 @@ # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac @@ -6053,7 +7500,7 @@ func_append libs " $deplib" done - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps @@ -6085,7 +7532,7 @@ case $file in *.la) ;; *) - func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + func_fatal_help "libraries can '-dlopen' only libtool libraries: $file" ;; esac done @@ -6093,7 +7540,7 @@ prog) compile_deplibs= finalize_deplibs= - alldeplibs=no + alldeplibs=false newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" @@ -6105,32 +7552,32 @@ for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... - if test "$linkmode,$pass" = "lib,link"; then + if test lib,link = "$linkmode,$pass"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done - deplibs="$tmp_deplibs" + deplibs=$tmp_deplibs fi - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" + if test lib,link = "$linkmode,$pass" || + test prog,scan = "$linkmode,$pass"; then + libs=$deplibs deplibs= fi - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; + dlopen) libs=$dlfiles ;; + dlpreopen) libs=$dlprefiles ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi - if test "$linkmode,$pass" = "lib,dlpreopen"; then + if test lib,dlpreopen = "$linkmode,$pass"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs @@ -6151,26 +7598,26 @@ esac done done - libs="$dlprefiles" + libs=$dlprefiles fi - if test "$pass" = dlopen; then + if test dlopen = "$pass"; then # Collect dlpreopened libraries - save_deplibs="$deplibs" + save_deplibs=$deplibs deplibs= fi for deplib in $libs; do lib= - found=no + found=false case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" - if test "$linkmode" = lib ; then + if test lib = "$linkmode"; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; @@ -6180,13 +7627,13 @@ continue ;; -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - func_warning "\`-l' is ignored for archives/objects" + if test lib != "$linkmode" && test prog != "$linkmode"; then + func_warning "'-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" @@ -6194,31 +7641,22 @@ for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" + lib=$searchdir/lib$name$search_ext if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes + if test .la = "$search_ext"; then + found=: else - found=no + found=false fi break 2 fi done done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - else # deplib is a libtool library + if $found; then + # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then @@ -6226,19 +7664,19 @@ old_library= func_source "$lib" for l in $old_library $library_names; do - ll="$l" + ll=$l done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no + if test "X$ll" = "X$old_library"; then # only static version available + found=false func_dirname "$lib" "" "." - ladir="$func_dirname_result" + ladir=$func_dirname_result lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" fi continue fi @@ -6247,15 +7685,25 @@ *) ;; esac fi + else + # deplib doesn't seem to be a libtool library + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" + fi + continue fi ;; # -l *.ltframework) - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" - if test "$linkmode" = lib ; then + if test lib = "$linkmode"; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; @@ -6268,18 +7716,18 @@ case $linkmode in lib) deplibs="$deplib $deplibs" - test "$pass" = conv && continue + test conv = "$pass" && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) - if test "$pass" = conv; then + if test conv = "$pass"; then deplibs="$deplib $deplibs" continue fi - if test "$pass" = scan; then + if test scan = "$pass"; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" @@ -6290,13 +7738,13 @@ func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) - func_warning "\`-L' is ignored for archives/objects" + func_warning "'-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) - if test "$pass" = link; then + if test link = "$pass"; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result @@ -6314,7 +7762,7 @@ lib=$func_resolve_sysroot_result ;; *.$libext) - if test "$pass" = conv; then + if test conv = "$pass"; then deplibs="$deplib $deplibs" continue fi @@ -6325,21 +7773,26 @@ case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) - valid_a_lib=no + valid_a_lib=false case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes + valid_a_lib=: fi ;; pass_all) - valid_a_lib=yes + valid_a_lib=: ;; esac - if test "$valid_a_lib" != yes; then + if $valid_a_lib; then + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + else echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" @@ -6347,18 +7800,13 @@ echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." - else - echo - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) - if test "$pass" != link; then + if test link != "$pass"; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" @@ -6369,10 +7817,10 @@ esac # linkmode ;; # *.$libext *.lo | *.$objext) - if test "$pass" = conv; then + if test conv = "$pass"; then deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + elif test prog = "$linkmode"; then + if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" @@ -6385,22 +7833,20 @@ continue ;; %DEPLIBS%) - alldeplibs=yes + alldeplibs=: continue ;; esac # case $deplib - if test "$found" = yes || test -f "$lib"; then : - else - func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" - fi + $found || test -f "$lib" \ + || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'" # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ - || func_fatal_error "\`$lib' is not a valid libtool archive" + || func_fatal_error "'$lib' is not a valid libtool archive" func_dirname "$lib" "" "." - ladir="$func_dirname_result" + ladir=$func_dirname_result dlname= dlopen= @@ -6430,19 +7876,19 @@ done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then + if test lib,link = "$linkmode,$pass" || + test prog,scan = "$linkmode,$pass" || + { test prog != "$linkmode" && test lib != "$linkmode"; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi - if test "$pass" = conv; then + if test conv = "$pass"; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for \`$lib'" + func_fatal_error "cannot find name of link library for '$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" @@ -6450,15 +7896,15 @@ tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done - elif test "$linkmode" != prog && test "$linkmode" != lib; then - func_fatal_error "\`$lib' is not a convenience library" + elif test prog != "$linkmode" && test lib != "$linkmode"; then + func_fatal_error "'$lib' is not a convenience library" fi continue fi # $pass = conv @@ -6467,26 +7913,26 @@ # Get the name of the library we link against. linklib= if test -n "$old_library" && - { test "$prefer_static_libs" = yes || - test "$prefer_static_libs,$installed" = "built,no"; }; then + { test yes = "$prefer_static_libs" || + test built,no = "$prefer_static_libs,$installed"; }; then linklib=$old_library else for l in $old_library $library_names; do - linklib="$l" + linklib=$l done fi if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for \`$lib'" + func_fatal_error "cannot find name of link library for '$lib'" fi # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - func_fatal_error "cannot -dlopen a convenience library: \`$lib'" - fi + if test dlopen = "$pass"; then + test -z "$libdir" \ + && func_fatal_error "cannot -dlopen a convenience library: '$lib'" if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then + test yes != "$dlopen_support" || + test no = "$build_libtool_libs" + then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't @@ -6500,40 +7946,40 @@ # We need an absolute path. case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "cannot determine absolute directory name of '$ladir'" func_warning "passing it literally to the linker, although it might fail" - abs_ladir="$ladir" + abs_ladir=$ladir fi ;; esac func_basename "$lib" - laname="$func_basename_result" + laname=$func_basename_result # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then + if test yes = "$installed"; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library \`$lib' was moved." - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" + func_warning "library '$lib' was moved." + dir=$ladir + absdir=$abs_ladir + libdir=$abs_ladir else - dir="$lt_sysroot$libdir" - absdir="$lt_sysroot$libdir" + dir=$lt_sysroot$libdir + absdir=$lt_sysroot$libdir fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + test yes = "$hardcode_automatic" && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" + dir=$ladir + absdir=$abs_ladir # Remove this search path later func_append notinst_path " $abs_ladir" else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" + dir=$ladir/$objdir + absdir=$abs_ladir/$objdir # Remove this search path later func_append notinst_path " $abs_ladir" fi @@ -6542,11 +7988,11 @@ name=$func_stripname_result # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir" && test "$linkmode" = prog; then - func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + if test dlpreopen = "$pass"; then + if test -z "$libdir" && test prog = "$linkmode"; then + func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'" fi - case "$host" in + case $host in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both @@ -6590,9 +8036,9 @@ if test -z "$libdir"; then # Link the convenience library - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then + elif test prog,link = "$linkmode,$pass"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else @@ -6602,14 +8048,14 @@ fi - if test "$linkmode" = prog && test "$pass" != link; then + if test prog = "$linkmode" && test link != "$pass"; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes + linkalldeplibs=false + if test no != "$link_all_deplibs" || test -z "$library_names" || + test no = "$build_libtool_libs"; then + linkalldeplibs=: fi tmp_libs= @@ -6621,14 +8067,14 @@ ;; esac # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then + if $linkalldeplibs; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac @@ -6638,15 +8084,15 @@ continue fi # $linkmode = prog... - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then if test -n "$library_names" && - { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || + { { test no = "$prefer_static_libs" || + test built,yes = "$prefer_static_libs,$installed"; } || test -z "$old_library"; }; then # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then # Make sure the rpath contains only unique directories. - case "$temp_rpath:" in + case $temp_rpath: in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac @@ -6675,9 +8121,9 @@ esac fi # $linkmode,$pass = prog,link... - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && + if $alldeplibs && + { test pass_all = "$deplibs_check_method" || + { test yes = "$build_libtool_libs" && test -n "$library_names"; }; }; then # We only need to search for static libraries continue @@ -6686,19 +8132,19 @@ link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes; then + if test built = "$use_static_libs" && test yes = "$installed"; then use_static_libs=no fi if test -n "$library_names" && - { test "$use_static_libs" = no || test -z "$old_library"; }; then + { test no = "$use_static_libs" || test -z "$old_library"; }; then case $host in - *cygwin* | *mingw* | *cegcc*) + *cygwin* | *mingw* | *cegcc* | *os2*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) - if test "$installed" = no; then + if test no = "$installed"; then func_append notinst_deplibs " $lib" need_relink=yes fi @@ -6708,24 +8154,24 @@ # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule="" + dlopenmodule= for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule="$dlpremoduletest" + dlopenmodule=$dlpremoduletest break fi done - if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then echo - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then + if test lib = "$linkmode" && + test yes = "$hardcode_into_libs"; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. @@ -6753,43 +8199,43 @@ # figure out the soname set dummy $library_names shift - realname="$1" + realname=$1 shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then - soname="$dlname" + soname=$dlname elif test -n "$soname_spec"; then # bleh windows case $host in - *cygwin* | mingw* | *cegcc*) + *cygwin* | mingw* | *cegcc* | *os2*) func_arith $current - $age major=$func_arith_result - versuffix="-$major" + versuffix=-$major ;; esac eval soname=\"$soname_spec\" else - soname="$realname" + soname=$realname fi # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" + soroot=$soname func_basename "$soroot" - soname="$func_basename_result" + soname=$func_basename_result func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else - func_verbose "extracting exported symbol list from \`$soname'" + func_verbose "extracting exported symbol list from '$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for \`$soname'" + func_verbose "generating import library for '$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library @@ -6797,58 +8243,58 @@ linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" - if test "$linkmode" = prog || test "$opt_mode" != relink; then + if test prog = "$linkmode" || test relink != "$opt_mode"; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" + if test no = "$hardcode_direct"; then + add=$dir/$linklib case $host in - *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; - *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; + *-*-sysv4*uw2*) add_dir=-L$dir ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir="-L$dir" ;; + *-*-unixware7*) add_dir=-L$dir ;; *-*-darwin* ) - # if the lib is a (non-dlopened) module then we can not + # if the lib is a (non-dlopened) module then we cannot # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null ; then + $GREP ": [^:]* bundle" >/dev/null; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then + if test -z "$old_library"; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else - add="$dir/$old_library" + add=$dir/$old_library fi elif test -n "$old_library"; then - add="$dir/$old_library" + add=$dir/$old_library fi fi esac - elif test "$hardcode_minus_L" = no; then + elif test no = "$hardcode_minus_L"; then case $host in - *-*-sunos*) add_shlibpath="$dir" ;; + *-*-sunos*) add_shlibpath=$dir ;; esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" + add_dir=-L$dir + add=-l$name + elif test no = "$hardcode_shlibpath_var"; then + add_shlibpath=$dir + add=-l$name else lib_linked=no fi ;; relink) - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$absdir" + if test yes = "$hardcode_direct" && + test no = "$hardcode_direct_absolute"; then + add=$dir/$linklib + elif test yes = "$hardcode_minus_L"; then + add_dir=-L$absdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in @@ -6857,10 +8303,10 @@ ;; esac fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" + add=-l$name + elif test yes = "$hardcode_shlibpath_var"; then + add_shlibpath=$dir + add=-l$name else lib_linked=no fi @@ -6868,7 +8314,7 @@ *) lib_linked=no ;; esac - if test "$lib_linked" != yes; then + if test yes != "$lib_linked"; then func_fatal_configuration "unsupported hardcode properties" fi @@ -6878,15 +8324,15 @@ *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && - test "$hardcode_minus_L" != yes && - test "$hardcode_shlibpath_var" = yes; then + if test yes != "$hardcode_direct" && + test yes != "$hardcode_minus_L" && + test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; @@ -6895,33 +8341,33 @@ fi fi - if test "$linkmode" = prog || test "$opt_mode" = relink; then + if test prog = "$linkmode" || test relink = "$opt_mode"; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then + if test yes = "$hardcode_direct" && + test no = "$hardcode_direct_absolute"; then + add=$libdir/$linklib + elif test yes = "$hardcode_minus_L"; then + add_dir=-L$libdir + add=-l$name + elif test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then + add=-l$name + elif test yes = "$hardcode_automatic"; then if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" + test -f "$inst_prefix_dir$libdir/$linklib"; then + add=$inst_prefix_dir$libdir/$linklib else - add="$libdir/$linklib" + add=$libdir/$linklib fi else # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" + add_dir=-L$libdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in @@ -6930,10 +8376,10 @@ ;; esac fi - add="-l$name" + add=-l$name fi - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else @@ -6941,43 +8387,43 @@ test -n "$add" && deplibs="$add $deplibs" fi fi - elif test "$linkmode" = prog; then + elif test prog = "$linkmode"; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" + if test unsupported != "$hardcode_direct"; then + test -n "$old_library" && linklib=$old_library compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi - elif test "$build_libtool_libs" = yes; then + elif test yes = "$build_libtool_libs"; then # Not a shared library - if test "$deplibs_check_method" != pass_all; then + if test pass_all != "$deplibs_check_method"; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo - $ECHO "*** Warning: This system can not link to static lib archive $lib." + $ECHO "*** Warning: This system cannot link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then + if test yes = "$module"; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo "*** 'nm' from GNU binutils and a full rebuild may help." fi - if test "$build_old_libs" = no; then + if test no = "$build_old_libs"; then build_libtool_libs=module build_old_libs=yes else @@ -6990,11 +8436,11 @@ fi fi # link shared/static library? - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then + { test yes != "$hardcode_into_libs" || + test yes = "$build_old_libs" || + test yes = "$link_static"; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do @@ -7008,12 +8454,12 @@ *) func_append temp_deplibs " $libdir";; esac done - dependency_libs="$temp_deplibs" + dependency_libs=$temp_deplibs fi func_append newlib_search_path " $absdir" # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do @@ -7023,7 +8469,7 @@ func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; @@ -7032,12 +8478,12 @@ func_append tmp_libs " $func_resolve_sysroot_result" done - if test "$link_all_deplibs" != no; then + if test no != "$link_all_deplibs"; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in - -L*) path="$deplib" ;; + -L*) path=$deplib ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result @@ -7045,12 +8491,12 @@ dir=$func_dirname_result # We need an absolute path. case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of \`$dir'" - absdir="$dir" + func_warning "cannot determine absolute directory name of '$dir'" + absdir=$dir fi ;; esac @@ -7058,35 +8504,35 @@ case $host in *-*-darwin*) depdepl= - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do + eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names"; then + for tmp in $deplibrary_names; do depdepl=$tmp done - if test -f "$absdir/$objdir/$depdepl" ; then - depdepl="$absdir/$objdir/$depdepl" - darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -f "$absdir/$objdir/$depdepl"; then + depdepl=$absdir/$objdir/$depdepl + darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then - darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi - func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl" + func_append linker_flags " -dylib_file $darwin_install_name:$depdepl" path= fi fi ;; *) - path="-L$absdir/$objdir" + path=-L$absdir/$objdir ;; esac else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" + func_fatal_error "'$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ - func_warning "\`$deplib' seems to be moved" + func_warning "'$deplib' seems to be moved" - path="-L$absdir" + path=-L$absdir fi ;; esac @@ -7098,23 +8544,23 @@ fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs - if test "$pass" = link; then - if test "$linkmode" = "prog"; then + if test link = "$pass"; then + if test prog = "$linkmode"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then + dependency_libs=$newdependency_libs + if test dlpreopen = "$pass"; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then + if test dlopen != "$pass"; then + test conv = "$pass" || { # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do @@ -7124,12 +8570,12 @@ esac done newlib_search_path= - fi + } - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else + if test prog,link = "$linkmode,$pass"; then vars="compile_deplibs finalize_deplibs" + else + vars=deplibs fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order @@ -7187,62 +8633,93 @@ eval $var=\"$tmp_libs\" done # for var fi + + # Add Sun CC postdeps if required: + test CXX = "$tagname" && { + case $host_os in + linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C++ 5.9 + func_suncc_cstd_abi + + if test no != "$suncc_use_cstd_abi"; then + func_append postdeps ' -library=Cstd -library=Crun' + fi + ;; + esac + ;; + + solaris*) + func_cc_basename "$CC" + case $func_cc_basename_result in + CC* | sunCC*) + func_suncc_cstd_abi + + if test no != "$suncc_use_cstd_abi"; then + func_append postdeps ' -library=Cstd -library=Crun' + fi + ;; + esac + ;; + esac + } + # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= - for i in $dependency_libs ; do + for i in $dependency_libs; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) - i="" + i= ;; esac - if test -n "$i" ; then + if test -n "$i"; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" + if test prog = "$linkmode"; then + dlfiles=$newdlfiles fi - if test "$linkmode" = prog || test "$linkmode" = lib; then - dlprefiles="$newdlprefiles" + if test prog = "$linkmode" || test lib = "$linkmode"; then + dlprefiles=$newdlprefiles fi case $linkmode in oldlib) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for archives" + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + func_warning "'-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for archives" ;; + func_warning "'-l' and '-L' are ignored for archives" ;; esac test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for archives" + func_warning "'-rpath' is ignored for archives" test -n "$xrpath" && \ - func_warning "\`-R' is ignored for archives" + func_warning "'-R' is ignored for archives" test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for archives" + func_warning "'-version-info/-version-number' is ignored for archives" test -n "$release" && \ - func_warning "\`-release' is ignored for archives" + func_warning "'-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ - func_warning "\`-export-symbols' is ignored for archives" + func_warning "'-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no - oldlibs="$output" + oldlibs=$output func_append objs "$old_deplibs" ;; lib) - # Make sure we only generate libraries of the form `libNAME.la'. + # Make sure we only generate libraries of the form 'libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" @@ -7251,10 +8728,10 @@ eval libname=\"$libname_spec\" ;; *) - test "$module" = no && \ - func_fatal_help "libtool library \`$output' must begin with \`lib'" + test no = "$module" \ + && func_fatal_help "libtool library '$output' must begin with 'lib'" - if test "$need_lib_prefix" != no; then + if test no != "$need_lib_prefix"; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result @@ -7268,8 +8745,8 @@ esac if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + if test pass_all != "$deplibs_check_method"; then + func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" @@ -7278,21 +8755,21 @@ fi fi - test "$dlself" != no && \ - func_warning "\`-dlopen self' is ignored for libtool libraries" + test no = "$dlself" \ + || func_warning "'-dlopen self' is ignored for libtool libraries" set dummy $rpath shift - test "$#" -gt 1 && \ - func_warning "ignoring multiple \`-rpath's for a libtool library" + test 1 -lt "$#" \ + && func_warning "ignoring multiple '-rpath's for a libtool library" - install_libdir="$1" + install_libdir=$1 oldlibs= if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so + # Some compilers have problems with a '.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" @@ -7301,20 +8778,20 @@ fi test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + func_warning "'-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ - func_warning "\`-release' is ignored for convenience libraries" + func_warning "'-release' is ignored for convenience libraries" else # Parse the version information argument. - save_ifs="$IFS"; IFS=':' + save_ifs=$IFS; IFS=: set dummy $vinfo 0 0 0 shift - IFS="$save_ifs" + IFS=$save_ifs test -n "$7" && \ - func_fatal_help "too many parameters to \`-version-info'" + func_fatal_help "too many parameters to '-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts @@ -7322,45 +8799,45 @@ case $vinfo_number in yes) - number_major="$1" - number_minor="$2" - number_revision="$3" + number_major=$1 + number_minor=$2 + number_revision=$3 # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix - # which has an extra 1 added just for fun + # that has an extra 1 added just for fun # case $version_type in # correct linux to gnu/linux during the next big refactor - darwin|linux|osf|windows|none) + darwin|freebsd-elf|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result - age="$number_minor" - revision="$number_revision" + age=$number_minor + revision=$number_revision ;; - freebsd-aout|freebsd-elf|qnx|sunos) - current="$number_major" - revision="$number_minor" - age="0" + freebsd-aout|qnx|sunos) + current=$number_major + revision=$number_minor + age=0 ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result - age="$number_minor" - revision="$number_minor" + age=$number_minor + revision=$number_minor lt_irix_increment=no ;; *) - func_fatal_configuration "$modename: unknown library version type \`$version_type'" + func_fatal_configuration "$modename: unknown library version type '$version_type'" ;; esac ;; no) - current="$1" - revision="$2" - age="$3" + current=$1 + revision=$2 + age=$3 ;; esac @@ -7368,30 +8845,30 @@ case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "CURRENT \`$current' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "CURRENT '$current' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "REVISION \`$revision' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "REVISION '$revision' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "AGE \`$age' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "AGE '$age' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then - func_error "AGE \`$age' is greater than the current interface number \`$current'" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "AGE '$age' is greater than the current interface number '$current'" + func_fatal_error "'$vinfo' is not valid version information" fi # Calculate the version variables. @@ -7406,26 +8883,36 @@ # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result - versuffix="$major.$age.$revision" + versuffix=$major.$age.$revision # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result - xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + # On Darwin other compilers + case $CC in + nagfor*) + verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" + ;; + *) + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + esac ;; freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; + major=.$current + versuffix=.$current.$revision ;; freebsd-elf) - major=".$current" - versuffix=".$current" + func_arith $current - $age + major=.$func_arith_result + versuffix=$major.$age.$revision ;; irix | nonstopux) - if test "X$lt_irix_increment" = "Xno"; then + if test no = "$lt_irix_increment"; then func_arith $current - $age else func_arith $current - $age + 1 @@ -7436,69 +8923,74 @@ nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac - verstring="$verstring_prefix$major.$revision" + verstring=$verstring_prefix$major.$revision # Add in all the interfaces that we are compatible with. loop=$revision - while test "$loop" -ne 0; do + while test 0 -ne "$loop"; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result - verstring="$verstring_prefix$major.$iface:$verstring" + verstring=$verstring_prefix$major.$iface:$verstring done - # Before this point, $major must not contain `.'. + # Before this point, $major must not contain '.'. major=.$major - versuffix="$major.$revision" + versuffix=$major.$revision ;; linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result - versuffix="$major.$age.$revision" + versuffix=$major.$age.$revision ;; osf) func_arith $current - $age major=.$func_arith_result - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" + versuffix=.$current.$age.$revision + verstring=$current.$age.$revision # Add in all the interfaces that we are compatible with. loop=$age - while test "$loop" -ne 0; do + while test 0 -ne "$loop"; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result - verstring="$verstring:${iface}.0" + verstring=$verstring:$iface.0 done # Make executables depend on our current version. - func_append verstring ":${current}.0" + func_append verstring ":$current.0" ;; qnx) - major=".$current" - versuffix=".$current" + major=.$current + versuffix=.$current + ;; + + sco) + major=.$current + versuffix=.$current ;; sunos) - major=".$current" - versuffix=".$current.$revision" + major=.$current + versuffix=.$current.$revision ;; windows) # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. + # extension on DOS 8.3 file systems. func_arith $current - $age major=$func_arith_result - versuffix="-$major" + versuffix=-$major ;; *) - func_fatal_configuration "unknown library version type \`$version_type'" + func_fatal_configuration "unknown library version type '$version_type'" ;; esac @@ -7512,42 +9004,45 @@ verstring= ;; *) - verstring="0.0" + verstring=0.0 ;; esac - if test "$need_version" = no; then + if test no = "$need_version"; then versuffix= else - versuffix=".0.0" + versuffix=.0.0 fi fi # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then + if test yes,no = "$avoid_version,$need_version"; then major= versuffix= - verstring="" + verstring= fi # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - func_warning "undefined symbols not allowed in $host shared libraries" - build_libtool_libs=no - build_old_libs=yes + if test yes = "$allow_undefined"; then + if test unsupported = "$allow_undefined_flag"; then + if test yes = "$build_old_libs"; then + func_warning "undefined symbols not allowed in $host shared libraries; building static only" + build_libtool_libs=no + else + func_fatal_error "can't build $host shared library unless -no-undefined is specified" + fi fi else # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" + allow_undefined_flag=$no_undefined_flag fi fi - func_generate_dlsyms "$libname" "$libname" "yes" + func_generate_dlsyms "$libname" "$libname" : func_append libobjs " $symfileobj" - test "X$libobjs" = "X " && libobjs= + test " " = "$libobjs" && libobjs= - if test "$opt_mode" != relink; then + if test relink != "$opt_mode"; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= @@ -7556,8 +9051,8 @@ case $p in *.$objext | *.gcno) ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*) + if test -n "$precious_files_regex"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue @@ -7573,11 +9068,11 @@ fi # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. @@ -7598,13 +9093,13 @@ *) func_append finalize_rpath " $libdir" ;; esac done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" + old_dlfiles=$dlfiles dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in @@ -7614,7 +9109,7 @@ done # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" + old_dlprefiles=$dlprefiles dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in @@ -7623,7 +9118,7 @@ esac done - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) @@ -7647,7 +9142,7 @@ ;; *) # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then + if test yes = "$build_libtool_need_lc"; then func_append deplibs " -lc" fi ;; @@ -7663,9 +9158,9 @@ # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? - release="" - versuffix="" - major="" + release= + versuffix= + major= newdeplibs= droppeddeps=no case $deplibs_check_method in @@ -7694,20 +9189,20 @@ -l*) func_stripname -l '' "$i" name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $i "*) func_append newdeplibs " $i" - i="" + i= ;; esac fi - if test -n "$i" ; then + if test -n "$i"; then libname=`eval "\\$ECHO \"$libname_spec\""` deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` set dummy $deplib_matches; shift deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then func_append newdeplibs " $i" else droppeddeps=yes @@ -7737,20 +9232,20 @@ $opt_dry_run || $RM conftest if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ldd_output=`ldd conftest` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $i "*) func_append newdeplibs " $i" - i="" + i= ;; esac fi - if test -n "$i" ; then + if test -n "$i"; then libname=`eval "\\$ECHO \"$libname_spec\""` deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` set dummy $deplib_matches; shift deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then func_append newdeplibs " $i" else droppeddeps=yes @@ -7787,24 +9282,24 @@ -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= ;; esac fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then libname=`eval "\\$ECHO \"$libname_spec\""` if test -n "$file_magic_glob"; then libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` else libnameglob=$libname fi - test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` + test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - if test "$want_nocaseglob" = yes; then + if test yes = "$want_nocaseglob"; then shopt -s nocaseglob potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` $nocaseglob @@ -7822,25 +9317,25 @@ # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? - potlib="$potent_lib" + potlib=$potent_lib while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + potliblink=`ls -ld $potlib | $SED 's/.* -> //'` case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;; + *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= break 2 fi done done fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." @@ -7848,7 +9343,7 @@ echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then + if test -z "$potlib"; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" @@ -7871,30 +9366,30 @@ -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= ;; esac fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test + potlib=$potent_lib # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= break 2 fi done done fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." @@ -7902,7 +9397,7 @@ echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then + if test -z "$potlib"; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" @@ -7918,18 +9413,18 @@ done # Gone through all deplibs. ;; none | unknown | *) - newdeplibs="" + newdeplibs= tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + for i in $predeps $postdeps; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"` done fi case $tmp_deplibs in *[!\ \ ]*) echo - if test "X$deplibs_check_method" = "Xnone"; then + if test none = "$deplibs_check_method"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." @@ -7953,8 +9448,8 @@ ;; esac - if test "$droppeddeps" = yes; then - if test "$module" = yes; then + if test yes = "$droppeddeps"; then + if test yes = "$module"; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" @@ -7963,12 +9458,12 @@ if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo "*** 'nm' from GNU binutils and a full rebuild may help." fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" + if test no = "$build_old_libs"; then + oldlibs=$output_objdir/$libname.$libext build_libtool_libs=module build_old_libs=yes else @@ -7979,14 +9474,14 @@ echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." - if test "$allow_undefined" = no; then + if test no = "$allow_undefined"; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" + if test no = "$build_old_libs"; then + oldlibs=$output_objdir/$libname.$libext build_libtool_libs=module build_old_libs=yes else @@ -8032,7 +9527,7 @@ *) func_append new_libs " $deplib" ;; esac done - deplibs="$new_libs" + deplibs=$new_libs # All the library-specific variables (install_libdir is set above). library_names= @@ -8040,25 +9535,25 @@ dlname= # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - # Remove ${wl} instances when linking with ld. + if test yes = "$build_libtool_libs"; then + # Remove $wl instances when linking with ld. # FIXME: should test the right _cmds variable. case $archive_cmds in *\$LD\ *) wl= ;; esac - if test "$hardcode_into_libs" = yes; then + if test yes = "$hardcode_into_libs"; then # Hardcode the library paths hardcode_libdirs= dep_rpath= - rpath="$finalize_rpath" - test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + rpath=$finalize_rpath + test relink = "$opt_mode" || rpath=$compile_rpath$rpath for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" + hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in @@ -8083,7 +9578,7 @@ # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" + libdir=$hardcode_libdirs eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then @@ -8097,8 +9592,8 @@ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi - shlibpath="$finalize_shlibpath" - test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + shlibpath=$finalize_shlibpath + test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi @@ -8108,19 +9603,19 @@ eval library_names=\"$library_names_spec\" set dummy $library_names shift - realname="$1" + realname=$1 shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else - soname="$realname" + soname=$realname fi if test -z "$dlname"; then dlname=$soname fi - lib="$output_objdir/$realname" + lib=$output_objdir/$realname linknames= for link do @@ -8134,7 +9629,7 @@ delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols="$output_objdir/$libname.uexp" + export_symbols=$output_objdir/$libname.uexp func_append delfiles " $export_symbols" fi @@ -8143,31 +9638,31 @@ cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile - if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + func_dll_def_p "$export_symbols" || { # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. - orig_export_symbols="$export_symbols" + orig_export_symbols=$export_symbols export_symbols= always_export_symbols=yes - fi + } fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" + if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for '$libname.la'" + export_symbols=$output_objdir/$libname.exp $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds - save_ifs="$IFS"; IFS='~' + save_ifs=$IFS; IFS='~' for cmd1 in $cmds; do - IFS="$save_ifs" + IFS=$save_ifs # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in @@ -8181,7 +9676,7 @@ try_normal_branch=no ;; esac - if test "$try_normal_branch" = yes \ + if test yes = "$try_normal_branch" \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then @@ -8192,7 +9687,7 @@ output_la=$func_basename_result save_libobjs=$libobjs save_output=$output - output=${output_objdir}/${output_la}.nm + output=$output_objdir/$output_la.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" @@ -8215,8 +9710,8 @@ break fi done - IFS="$save_ifs" - if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + IFS=$save_ifs + if test -n "$export_symbols_regex" && test : != "$skipped_export"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi @@ -8224,16 +9719,16 @@ fi if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + tmp_export_symbols=$export_symbols + test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi - if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + if test : != "$skipped_export" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + func_verbose "filter symbol list for '$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine + # 's' commands, which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. @@ -8252,11 +9747,11 @@ ;; esac done - deplibs="$tmp_deplibs" + deplibs=$tmp_deplibs if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && - test "$compiler_needs_object" = yes && + test yes = "$compiler_needs_object" && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. @@ -8267,7 +9762,7 @@ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $convenience @@ -8276,18 +9771,18 @@ fi fi - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then + if test yes = "$module" && test -n "$module_cmds"; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds @@ -8305,7 +9800,7 @@ fi fi - if test "X$skipped_export" != "X:" && + if test : != "$skipped_export" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then @@ -8338,8 +9833,8 @@ last_robj= k=1 - if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then - output=${output_objdir}/${output_la}.lnkscript + if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then + output=$output_objdir/$output_la.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs @@ -8351,14 +9846,14 @@ func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result - elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then - output=${output_objdir}/${output_la}.lnk + elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then + output=$output_objdir/$output_la.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= - if test "$compiler_needs_object" = yes; then + if test yes = "$compiler_needs_object"; then firstobj="$1 " shift fi @@ -8373,7 +9868,7 @@ else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-${k}.$objext + output=$output_objdir/$output_la-$k.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result @@ -8385,13 +9880,13 @@ func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result - if test "X$objlist" = X || + if test -z "$objlist" || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. - if test "$k" -eq 1 ; then + if test 1 -eq "$k"; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" @@ -8401,10 +9896,10 @@ reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi - last_robj=$output_objdir/$output_la-${k}.$objext + last_robj=$output_objdir/$output_la-$k.$objext func_arith $k + 1 k=$func_arith_result - output=$output_objdir/$output_la-${k}.$objext + output=$output_objdir/$output_la-$k.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result @@ -8416,9 +9911,9 @@ # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" - eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + eval concat_cmds=\"\$concat_cmds$reload_cmds\" if test -n "$last_robj"; then - eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi func_append delfiles " $output" @@ -8426,9 +9921,9 @@ output= fi - if ${skipped_export-false}; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" + ${skipped_export-false} && { + func_verbose "generating symbol list for '$libname.la'" + export_symbols=$output_objdir/$libname.exp $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. @@ -8437,16 +9932,16 @@ if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi - fi + } test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' + save_ifs=$IFS; IFS='~' for cmd in $concat_cmds; do - IFS="$save_ifs" - $opt_silent || { + IFS=$save_ifs + $opt_quiet || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } @@ -8454,7 +9949,7 @@ lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8463,7 +9958,7 @@ exit $lt_exit } done - IFS="$save_ifs" + IFS=$save_ifs if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' @@ -8471,18 +9966,18 @@ fi fi - if ${skipped_export-false}; then + ${skipped_export-false} && { if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + tmp_export_symbols=$export_symbols + test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + func_verbose "filter symbol list for '$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine + # 's' commands, which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. @@ -8491,7 +9986,7 @@ export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi - fi + } libobjs=$output # Restore the value of output. @@ -8505,7 +10000,7 @@ # value of $libobjs for piecewise linking. # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then + if test yes = "$module" && test -n "$module_cmds"; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else @@ -8527,7 +10022,7 @@ # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $dlprefiles @@ -8535,11 +10030,12 @@ test "X$libobjs" = "X " && libobjs= fi - save_ifs="$IFS"; IFS='~' + save_ifs=$IFS; IFS='~' for cmd in $cmds; do - IFS="$save_ifs" + IFS=$sp$nl eval cmd=\"$cmd\" - $opt_silent || { + IFS=$save_ifs + $opt_quiet || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } @@ -8547,7 +10043,7 @@ lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8556,10 +10052,10 @@ exit $lt_exit } done - IFS="$save_ifs" + IFS=$save_ifs # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then @@ -8579,39 +10075,39 @@ done # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then + if test yes = "$module" || test yes = "$export_dynamic"; then # On all known operating systems, these are identical. - dlname="$soname" + dlname=$soname fi fi ;; obj) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for objects" + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + func_warning "'-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for objects" ;; + func_warning "'-l' and '-L' are ignored for objects" ;; esac test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for objects" + func_warning "'-rpath' is ignored for objects" test -n "$xrpath" && \ - func_warning "\`-R' is ignored for objects" + func_warning "'-R' is ignored for objects" test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for objects" + func_warning "'-version-info' is ignored for objects" test -n "$release" && \ - func_warning "\`-release' is ignored for objects" + func_warning "'-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object \`$output' from non-libtool objects" + func_fatal_error "cannot build library object '$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" @@ -8619,7 +10115,7 @@ ;; *) libobj= - obj="$output" + obj=$output ;; esac @@ -8632,17 +10128,19 @@ # the extraction. reload_conv_objs= gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec and hope we can get by with - # turning comma into space.. - wl= - + # if reload_cmds runs $LD directly, get rid of -Wl from + # whole_archive_flag_spec and hope we can get by with turning comma + # into space. + case $reload_cmds in + *\$LD[\ \$]*) wl= ;; + esac if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags else - gentop="$output_objdir/${obj}x" + gentop=$output_objdir/${obj}x func_append generated " $gentop" func_extract_archives $gentop $convenience @@ -8651,12 +10149,12 @@ fi # If we're not building shared, we need to use non_pic_objs - test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + test yes = "$build_libtool_libs" || libobjs=$non_pic_objects # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs - output="$obj" + output=$obj func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. @@ -8668,7 +10166,7 @@ exit $EXIT_SUCCESS fi - if test "$build_libtool_libs" != yes; then + test yes = "$build_libtool_libs" || { if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi @@ -8678,12 +10176,12 @@ # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS - fi + } - if test -n "$pic_flag" || test "$pic_mode" != default; then + if test -n "$pic_flag" || test default != "$pic_mode"; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" - output="$libobj" + output=$libobj func_execute_cmds "$reload_cmds" 'exit $?' fi @@ -8700,16 +10198,14 @@ output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for programs" + func_warning "'-version-info' is ignored for programs" test -n "$release" && \ - func_warning "\`-release' is ignored for programs" + func_warning "'-release' is ignored for programs" - test "$preload" = yes \ - && test "$dlopen_support" = unknown \ - && test "$dlopen_self" = unknown \ - && test "$dlopen_self_static" = unknown && \ - func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + $preload \ + && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \ + && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) @@ -8723,11 +10219,11 @@ *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). - if test "$tagname" = CXX ; then + if test CXX = "$tagname"; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) - func_append compile_command " ${wl}-bind_at_load" - func_append finalize_command " ${wl}-bind_at_load" + func_append compile_command " $wl-bind_at_load" + func_append finalize_command " $wl-bind_at_load" ;; esac fi @@ -8763,7 +10259,7 @@ *) func_append new_libs " $deplib" ;; esac done - compile_deplibs="$new_libs" + compile_deplibs=$new_libs func_append compile_command " $compile_deplibs" @@ -8787,7 +10283,7 @@ if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" + hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in @@ -8810,7 +10306,7 @@ fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; @@ -8827,10 +10323,10 @@ # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" + libdir=$hardcode_libdirs eval rpath=\" $hardcode_libdir_flag_spec\" fi - compile_rpath="$rpath" + compile_rpath=$rpath rpath= hardcode_libdirs= @@ -8838,7 +10334,7 @@ if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" + hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in @@ -8863,45 +10359,43 @@ # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" + libdir=$hardcode_libdirs eval rpath=\" $hardcode_libdir_flag_spec\" fi - finalize_rpath="$rpath" + finalize_rpath=$rpath - if test -n "$libobjs" && test "$build_old_libs" = yes; then + if test -n "$libobjs" && test yes = "$build_old_libs"; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi - func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + func_generate_dlsyms "$outputname" "@PROGRAM@" false # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi - wrappers_required=yes + wrappers_required=: case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. - wrappers_required=no + wrappers_required=false ;; *cygwin* | *mingw* ) - if test "$build_libtool_libs" != yes; then - wrappers_required=no - fi + test yes = "$build_libtool_libs" || wrappers_required=false ;; *) - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - wrappers_required=no + if test no = "$need_relink" || test yes != "$build_libtool_libs"; then + wrappers_required=false fi ;; esac - if test "$wrappers_required" = no; then + $wrappers_required || { # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" + link_command=$compile_command$compile_rpath # We have no uninstalled library dependencies, so finalize right now. exit_status=0 @@ -8914,12 +10408,12 @@ fi # Delete the generated files. - if test -f "$output_objdir/${outputname}S.${objext}"; then - func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + if test -f "$output_objdir/${outputname}S.$objext"; then + func_show_eval '$RM "$output_objdir/${outputname}S.$objext"' fi exit $exit_status - fi + } if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" @@ -8949,9 +10443,9 @@ fi fi - if test "$no_install" = yes; then + if test yes = "$no_install"; then # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" + link_command=$compile_var$compile_command$compile_rpath # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. @@ -8968,27 +10462,28 @@ exit $EXIT_SUCCESS fi - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - func_warning "this platform does not like uninstalled shared libraries" - func_warning "\`$output' will be relinked during installation" - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi + case $hardcode_action,$fast_install in + relink,*) + # Fast installation is not supported + link_command=$compile_var$compile_command$compile_rpath + relink_command=$finalize_var$finalize_command$finalize_rpath + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "'$output' will be relinked during installation" + ;; + *,yes) + link_command=$finalize_var$compile_command$finalize_rpath + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + ;; + *,no) + link_command=$compile_var$compile_command$compile_rpath + relink_command=$finalize_var$finalize_command$finalize_rpath + ;; + *,needless) + link_command=$finalize_var$compile_command$finalize_rpath + relink_command= + ;; + esac # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` @@ -9045,8 +10540,8 @@ func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" + cwrappersource=$output_path/$objdir/lt-$output_name.c + cwrapper=$output_path/$output_name.exe $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 @@ -9067,7 +10562,7 @@ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host" ; then + if test "x$build" = "x$host"; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result @@ -9090,25 +10585,27 @@ # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save $symfileobj" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" + case $build_libtool_libs in + convenience) + oldobjs="$libobjs_save $symfileobj" + addlibs=$convenience build_libtool_libs=no - else + ;; + module) + oldobjs=$libobjs_save + addlibs=$old_convenience + build_libtool_libs=no + ;; + *) oldobjs="$old_deplibs $non_pic_objects" - if test "$preload" = yes && test -f "$symfileobj"; then - func_append oldobjs " $symfileobj" - fi - fi - addlibs="$old_convenience" - fi + $preload && test -f "$symfileobj" \ + && func_append oldobjs " $symfileobj" + addlibs=$old_convenience + ;; + esac if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $addlibs @@ -9116,13 +10613,13 @@ fi # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $dlprefiles @@ -9143,7 +10640,7 @@ : else echo "copying selected object files to avoid basename conflicts..." - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs @@ -9152,7 +10649,7 @@ for obj in $save_oldobjs do func_basename "$obj" - objbase="$func_basename_result" + objbase=$func_basename_result case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) @@ -9221,18 +10718,18 @@ else # the above command should be used before it gets too long oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then + if test "$obj" = "$last_oldobj"; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + eval concat_cmds=\"\$concat_cmds$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist - if test "X$oldobjs" = "X" ; then + if test -z "$oldobjs"; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" @@ -9249,7 +10746,7 @@ case $output in *.la) old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" + test yes = "$build_old_libs" && old_library=$libname.$libext func_verbose "creating $output" # Preserve any variables that may affect compiler behavior @@ -9264,31 +10761,31 @@ fi done # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - if test "$hardcode_automatic" = yes ; then + if test yes = "$hardcode_automatic"; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do - if test "$installed" = yes; then + if test yes = "$installed"; then if test -z "$install_libdir"; then break fi - output="$output_objdir/$outputname"i + output=$output_objdir/${outputname}i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" - name="$func_basename_result" + name=$func_basename_result func_resolve_sysroot "$deplib" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" + func_fatal_error "'$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) @@ -9304,23 +10801,23 @@ *) func_append newdependency_libs " $deplib" ;; esac done - dependency_libs="$newdependency_libs" + dependency_libs=$newdependency_libs newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + name=$func_basename_result + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" + func_fatal_error "'$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done - dlfiles="$newdlfiles" + dlfiles=$newdlfiles newdlprefiles= for lib in $dlprefiles; do case $lib in @@ -9330,34 +10827,34 @@ # didn't already link the preopened objects directly into # the library: func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + name=$func_basename_result + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" + func_fatal_error "'$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done - dlprefiles="$newdlprefiles" + dlprefiles=$newdlprefiles else newdlfiles= for lib in $dlfiles; do case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done - dlfiles="$newdlfiles" + dlfiles=$newdlfiles newdlprefiles= for lib in $dlprefiles; do case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done - dlprefiles="$newdlprefiles" + dlprefiles=$newdlprefiles fi $RM $output # place dlname in correct position for cygwin @@ -9373,10 +10870,9 @@ case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. - if test "x$bindir" != x ; - then + if test -n "$bindir"; then func_relative_path "$install_libdir" "$bindir" - tdlname=$func_relative_path_result$dlname + tdlname=$func_relative_path_result/$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname @@ -9385,7 +10881,7 @@ esac $ECHO > $output "\ # $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. @@ -9399,7 +10895,7 @@ # The name of the static archive. old_library='$old_library' -# Linker flags that can not go in dependency_libs. +# Linker flags that cannot go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. @@ -9425,7 +10921,7 @@ # Directory that this library needs to be installed in: libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then + if test no,yes = "$installed,$need_relink"; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi @@ -9440,27 +10936,29 @@ exit $EXIT_SUCCESS } -{ test "$opt_mode" = link || test "$opt_mode" = relink; } && - func_mode_link ${1+"$@"} +if test link = "$opt_mode" || test relink = "$opt_mode"; then + func_mode_link ${1+"$@"} +fi # func_mode_uninstall arg... func_mode_uninstall () { - $opt_debug - RM="$nonopt" + $debug_cmd + + RM=$nonopt files= - rmforce= + rmforce=false exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. - libtool_install_magic="$magic" + libtool_install_magic=$magic for arg do case $arg in - -f) func_append RM " $arg"; rmforce=yes ;; + -f) func_append RM " $arg"; rmforce=: ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac @@ -9473,18 +10971,18 @@ for file in $files; do func_dirname "$file" "" "." - dir="$func_dirname_result" - if test "X$dir" = X.; then - odir="$objdir" + dir=$func_dirname_result + if test . = "$dir"; then + odir=$objdir else - odir="$dir/$objdir" + odir=$dir/$objdir fi func_basename "$file" - name="$func_basename_result" - test "$opt_mode" = uninstall && odir="$dir" + name=$func_basename_result + test uninstall = "$opt_mode" && odir=$dir # Remember odir for removal later, being careful to avoid duplicates - if test "$opt_mode" = clean; then + if test clean = "$opt_mode"; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; @@ -9499,11 +10997,11 @@ elif test -d "$file"; then exit_status=1 continue - elif test "$rmforce" = yes; then + elif $rmforce; then continue fi - rmfiles="$file" + rmfiles=$file case $name in *.la) @@ -9517,7 +11015,7 @@ done test -n "$old_library" && func_append rmfiles " $odir/$old_library" - case "$opt_mode" in + case $opt_mode in clean) case " $library_names " in *" $dlname "*) ;; @@ -9528,12 +11026,12 @@ uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; @@ -9549,21 +11047,19 @@ func_source $dir/$name # Add PIC object to the list of files to remove. - if test -n "$pic_object" && - test "$pic_object" != none; then + if test -n "$pic_object" && test none != "$pic_object"; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && - test "$non_pic_object" != none; then + if test -n "$non_pic_object" && test none != "$non_pic_object"; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) - if test "$opt_mode" = clean ; then + if test clean = "$opt_mode"; then noexename=$name case $file in *.exe) @@ -9590,12 +11086,12 @@ # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles - func_append rmfiles " $odir/$name $odir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then + func_append rmfiles " $odir/$name $odir/${name}S.$objext" + if test yes = "$fast_install" && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi - if test "X$noexename" != "X$name" ; then - func_append rmfiles " $odir/lt-${noexename}.c" + if test "X$noexename" != "X$name"; then + func_append rmfiles " $odir/lt-$noexename.c" fi fi fi @@ -9604,7 +11100,7 @@ func_show_eval "$RM $rmfiles" 'exit_status=1' done - # Try to remove the ${objdir}s in the directories where we deleted files + # Try to remove the $objdir's in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" @@ -9614,16 +11110,17 @@ exit $exit_status } -{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && - func_mode_uninstall ${1+"$@"} +if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then + func_mode_uninstall ${1+"$@"} +fi test -z "$opt_mode" && { - help="$generic_help" + help=$generic_help func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode '$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" @@ -9634,7 +11131,7 @@ # The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting +# where we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support @@ -9657,5 +11154,3 @@ # mode:shell-script # sh-indentation:2 # End: -# vi:sw=2 - diff -Nru parlatype-1.5.4/libparlatype/m4/intltool.m4 parlatype-1.5.6/libparlatype/m4/intltool.m4 --- parlatype-1.5.4/libparlatype/m4/intltool.m4 2017-10-12 10:55:18.000000000 +0000 +++ parlatype-1.5.6/libparlatype/m4/intltool.m4 2018-04-09 18:21:49.000000000 +0000 @@ -155,31 +155,6 @@ # Substitute ALL_LINGUAS so we can use it in po/Makefile AC_SUBST(ALL_LINGUAS) -# Set DATADIRNAME correctly if it is not set yet -# (copied from glib-gettext.m4) -if test -z "$DATADIRNAME"; then - AC_LINK_IFELSE( - [AC_LANG_PROGRAM([[]], - [[extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr]])], - [DATADIRNAME=share], - [case $host in - *-*-solaris*) - dnl On Solaris, if bind_textdomain_codeset is in libc, - dnl GNU format message catalog is always supported, - dnl since both are added to the libc all together. - dnl Hence, we'd like to go with DATADIRNAME=share - dnl in this case. - AC_CHECK_FUNC(bind_textdomain_codeset, - [DATADIRNAME=share], [DATADIRNAME=lib]) - ;; - *) - [DATADIRNAME=lib] - ;; - esac]) -fi -AC_SUBST(DATADIRNAME) - IT_PO_SUBDIR([po]) ]) diff -Nru parlatype-1.5.4/libparlatype/m4/libtool.m4 parlatype-1.5.6/libparlatype/m4/libtool.m4 --- parlatype-1.5.4/libparlatype/m4/libtool.m4 2017-10-12 10:55:43.000000000 +0000 +++ parlatype-1.5.6/libparlatype/m4/libtool.m4 2018-04-09 18:22:30.000000000 +0000 @@ -1,8 +1,6 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives @@ -10,36 +8,30 @@ # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. # -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. # -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with this program. If not, see . ]) -# serial 57 LT_INIT +# serial 58 LT_INIT # LT_PREREQ(VERSION) @@ -67,7 +59,7 @@ # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], -[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl @@ -91,7 +83,7 @@ _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" +LIBTOOL_DEPS=$ltmain # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' @@ -111,26 +103,43 @@ dnl AC_DEFUN([AM_PROG_LIBTOOL], []) +# _LT_PREPARE_CC_BASENAME +# ----------------------- +m4_defun([_LT_PREPARE_CC_BASENAME], [ +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in @S|@*""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} +])# _LT_PREPARE_CC_BASENAME + + # _LT_CC_BASENAME(CC) # ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME, +# but that macro is also expanded into generated libtool script, which +# arranges for $SED and $ECHO to be set by different means. m4_defun([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +[m4_require([_LT_PREPARE_CC_BASENAME])dnl +AC_REQUIRE([_LT_DECL_SED])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl +func_cc_basename $1 +cc_basename=$func_cc_basename_result ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set -# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} @@ -177,15 +186,16 @@ m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_WITH_SYSROOT])dnl +m4_require([_LT_CMD_TRUNCATE])dnl _LT_CONFIG_LIBTOOL_INIT([ -# See if we are running on zsh, and set the options which allow our +# See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then +if test -n "\${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi ]) -if test -n "${ZSH_VERSION+set}" ; then +if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi @@ -198,7 +208,7 @@ # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then + if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -209,14 +219,14 @@ ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except MSVC, +# All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a -with_gnu_ld="$lt_cv_prog_gnu_ld" +with_gnu_ld=$lt_cv_prog_gnu_ld -old_CC="$CC" -old_CFLAGS="$CFLAGS" +old_CC=$CC +old_CFLAGS=$CFLAGS # Set sane defaults for various variables test -z "$CC" && CC=cc @@ -269,14 +279,14 @@ # _LT_PROG_LTMAIN # --------------- -# Note that this code is called both from `configure', and `config.status' +# Note that this code is called both from 'configure', and 'config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# `config.status' has no value for ac_aux_dir unless we are using Automake, +# 'config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -ltmain="$ac_aux_dir/ltmain.sh" +ltmain=$ac_aux_dir/ltmain.sh ])# _LT_PROG_LTMAIN @@ -286,7 +296,7 @@ # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the `libtool' +# in macros and then make a single call at the end using the 'libtool' # label. @@ -421,8 +431,8 @@ # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ -# Quote a variable value, and forward it to `config.status' so that its -# declaration there will have the same value as in `configure'. VARNAME +# Quote a variable value, and forward it to 'config.status' so that its +# declaration there will have the same value as in 'configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) @@ -446,7 +456,7 @@ # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -available_tags="_LT_TAGS"dnl +available_tags='_LT_TAGS'dnl ]) @@ -474,7 +484,7 @@ # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], @@ -500,8 +510,8 @@ # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations -# into `config.status', and then the shell code to quote escape them in -# for loops in `config.status'. Finally, any additional code accumulated +# into 'config.status', and then the shell code to quote escape them in +# for loops in 'config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], @@ -547,7 +557,7 @@ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -560,7 +570,7 @@ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -576,7 +586,7 @@ # Generate a child script FILE with all initialization necessary to # reuse the environment learned by the parent script, and make the # file executable. If COMMENT is supplied, it is inserted after the -# `#!' sequence but before initialization text begins. After this +# '#!' sequence but before initialization text begins. After this # macro, additional text can be appended to FILE to form the body of # the child script. The macro ends with non-zero status if the # file could not be fully written (such as if the disk is full). @@ -598,7 +608,7 @@ _AS_PREPARE exec AS_MESSAGE_FD>&1 _ASEOF -test $lt_write_fail = 0 && chmod +x $1[]dnl +test 0 = "$lt_write_fail" && chmod +x $1[]dnl m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT @@ -621,7 +631,7 @@ } >&AS_MESSAGE_LOG_FD lt_cl_help="\ -\`$as_me' creates a local libtool stub from the current configuration, +'$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. @@ -643,7 +653,7 @@ This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." -while test $[#] != 0 +while test 0 != $[#] do case $[1] in --version | --v* | -V ) @@ -656,10 +666,10 @@ lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] -Try \`$[0] --help' for more information.]) ;; +Try '$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] -Try \`$[0] --help' for more information.]) ;; +Try '$[0] --help' for more information.]) ;; esac shift done @@ -685,7 +695,7 @@ # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. lt_cl_success=: -test "$silent" = yes && +test yes = "$silent" && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false @@ -705,27 +715,30 @@ _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ - # See if we are running on zsh, and set the options which allow our + # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then + if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi - cfgfile="${ofile}T" + cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# Generated automatically by $as_me ($PACKAGE) $VERSION # NOTE: Changes made to this file will be lost: look at ltmain.sh. -# + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + _LT_COPYING _LT_LIBTOOL_TAGS +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} + # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS @@ -733,13 +746,24 @@ _LT_EOF + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +_LT_PREPARE_MUNGE_PATH_LIST +_LT_PREPARE_CC_BASENAME + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then +if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -756,8 +780,6 @@ sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) - _LT_PROG_REPLACE_SHELLFNS - mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" @@ -775,7 +797,6 @@ [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS @@ -974,7 +995,7 @@ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then + if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the @@ -992,7 +1013,7 @@ cat conftest.err >&AS_MESSAGE_LOG_FD # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. - elif test -f libconftest.dylib && test $_lt_result -eq 0; then + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD @@ -1010,7 +1031,7 @@ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS ]) AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], @@ -1032,7 +1053,7 @@ _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD - elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then lt_cv_ld_force_load=yes else cat conftest.err >&AS_MESSAGE_LOG_FD @@ -1042,32 +1063,32 @@ ]) case $host_os in rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[[012]]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[[012]][[,.]]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then + if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= @@ -1087,29 +1108,29 @@ _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + if test yes = "$lt_cv_ld_force_load"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) else _LT_TAGVAR(whole_archive_flag_spec, $1)='' fi _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; + ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac - if test "$_lt_dar_can_shared" = "yes"; then + if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" m4_if([$1], [CXX], -[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then - _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" +[ if test yes != "$lt_cv_apple_cc_single_mod"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" fi ],[]) else @@ -1129,7 +1150,7 @@ # Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl -if test "${lt_cv_aix_libpath+set}" = set; then +if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], @@ -1147,7 +1168,7 @@ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib fi ]) aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) @@ -1167,8 +1188,8 @@ # ----------------------- # Find how we can fake an echo command that does not interpret backslash. # In particular, with Autoconf 2.60 or later we add some code to the start -# of the generated configure script which will find a shell with a builtin -# printf (which we can use as an echo command). +# of the generated configure script that will find a shell with a builtin +# printf (that we can use as an echo command). m4_defun([_LT_PROG_ECHO_BACKSLASH], [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO @@ -1196,10 +1217,10 @@ # Invoke $ECHO with all args, space-separated. func_echo_all () { - $ECHO "$*" + $ECHO "$*" } -case "$ECHO" in +case $ECHO in printf*) AC_MSG_RESULT([printf]) ;; print*) AC_MSG_RESULT([print -r]) ;; *) AC_MSG_RESULT([cat]) ;; @@ -1225,16 +1246,17 @@ AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], -[ --with-sysroot[=DIR] Search for dependent libraries within DIR - (or the compiler's sysroot if not specified).], +[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@], + [Search for dependent libraries within DIR (or the compiler's sysroot + if not specified).])], [], [with_sysroot=no]) dnl lt_sysroot will always be passed unquoted. We quote it here dnl in case the user passed a directory name. lt_sysroot= -case ${with_sysroot} in #( +case $with_sysroot in #( yes) - if test "$GCC" = yes; then + if test yes = "$GCC"; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( @@ -1244,14 +1266,14 @@ no|'') ;; #( *) - AC_MSG_RESULT([${with_sysroot}]) + AC_MSG_RESULT([$with_sysroot]) AC_MSG_ERROR([The sysroot must be an absolute path.]) ;; esac AC_MSG_RESULT([${lt_sysroot:-no}]) _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -[dependent libraries, and in which our libraries should be installed.])]) +[dependent libraries, and where our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- @@ -1259,31 +1281,33 @@ [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +test no = "$enable_libtool_lock" || enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) - HPUX_IA64_MODE="32" + HPUX_IA64_MODE=32 ;; *ELF-64*) - HPUX_IA64_MODE="64" + HPUX_IA64_MODE=64 ;; esac fi rm -rf conftest* ;; *-*-irix6*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" @@ -1312,9 +1336,46 @@ rm -rf conftest* ;; +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in @@ -1333,10 +1394,10 @@ ;; esac ;; - powerpc64le-*) + powerpc64le-*linux*) LD="${LD-ld} -m elf32lppclinux" ;; - powerpc64-*) + powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) @@ -1355,10 +1416,10 @@ x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; - powerpcle-*) + powerpcle-*linux*) LD="${LD-ld} -m elf64lppc" ;; - powerpc-*) + powerpc-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) @@ -1376,19 +1437,20 @@ *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" + SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then + if test yes != "$lt_cv_cc_needs_belf"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" + CFLAGS=$SAVE_CFLAGS fi ;; *-*solaris*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in @@ -1396,7 +1458,7 @@ case $lt_cv_prog_gnu_ld in yes*) case $host in - i?86-*-solaris*) + i?86-*-solaris*|x86_64-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) @@ -1405,7 +1467,7 @@ esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD="${LD-ld}_sol2" + LD=${LD-ld}_sol2 fi ;; *) @@ -1421,7 +1483,7 @@ ;; esac -need_locks="$enable_libtool_lock" +need_locks=$enable_libtool_lock ])# _LT_ENABLE_LOCK @@ -1440,11 +1502,11 @@ [echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -eq 0; then + if test 0 -eq "$ac_status"; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -ne 0; then + if test 0 -ne "$ac_status"; then lt_cv_ar_at_file=@ fi fi @@ -1452,7 +1514,7 @@ ]) ]) -if test "x$lt_cv_ar_at_file" = xno; then +if test no = "$lt_cv_ar_at_file"; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file @@ -1483,7 +1545,7 @@ if test -n "$RANLIB"; then case $host_os in - openbsd*) + bitrig* | openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) @@ -1519,7 +1581,7 @@ [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" + lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -1546,7 +1608,7 @@ $RM conftest* ]) -if test x"[$]$2" = xyes; then +if test yes = "[$]$2"; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) @@ -1568,7 +1630,7 @@ m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -1587,10 +1649,10 @@ fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS ]) -if test x"[$]$2" = xyes; then +if test yes = "[$]$2"; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) @@ -1611,7 +1673,7 @@ AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 - teststring="ABCD" + teststring=ABCD case $build_os in msdosdjgpp*) @@ -1651,7 +1713,7 @@ lt_cv_sys_max_cmd_len=8192; ;; - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` @@ -1702,22 +1764,22 @@ *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then + test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do + for i in 1 2 3 4 5 6 7 8; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough + test 17 != "$i" # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring @@ -1733,7 +1795,7 @@ ;; esac ]) -if test -n $lt_cv_sys_max_cmd_len ; then +if test -n "$lt_cv_sys_max_cmd_len"; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) @@ -1761,7 +1823,7 @@ # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl -if test "$cross_compiling" = yes; then : +if test yes = "$cross_compiling"; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -1808,9 +1870,9 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated +/* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif @@ -1836,7 +1898,7 @@ return status; }] _LT_EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in @@ -1857,7 +1919,7 @@ # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then +if test yes != "$enable_dlopen"; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown @@ -1867,44 +1929,52 @@ case $host_os in beos*) - lt_cv_dlopen="load_add_on" + lt_cv_dlopen=load_add_on lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; cygwin*) - lt_cv_dlopen="dlopen" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs= ;; darwin*) - # if libdl is installed we need to link against it + # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[ + lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + *) AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], + [lt_cv_dlopen=shl_load], [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld], [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], + [lt_cv_dlopen=dlopen], [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl], [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld], [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld]) ]) ]) ]) @@ -1913,21 +1983,21 @@ ;; esac - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else + if test no = "$lt_cv_dlopen"; then enable_dlopen=no + else + enable_dlopen=yes fi case $lt_cv_dlopen in dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - save_LIBS="$LIBS" + save_LIBS=$LIBS LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], @@ -1937,7 +2007,7 @@ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) - if test "x$lt_cv_dlopen_self" = xyes; then + if test yes = "$lt_cv_dlopen_self"; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl @@ -1947,9 +2017,9 @@ ]) fi - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS ;; esac @@ -2041,8 +2111,8 @@ m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) -hard_links="nottested" -if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then +hard_links=nottested +if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes @@ -2052,8 +2122,8 @@ ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + if test no = "$hard_links"; then + AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe]) need_locks=warn fi else @@ -2080,8 +2150,8 @@ _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl -AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", - [Define to the sub-directory in which libtool stores uninstalled libraries.]) +AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/", + [Define to the sub-directory where libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR @@ -2093,15 +2163,15 @@ _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || - test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then # We can hardcode non-existent directories. - if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + if test no != "$_LT_TAGVAR(hardcode_direct, $1)" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" && + test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else @@ -2115,12 +2185,12 @@ fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) -if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || - test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then +if test relink = "$_LT_TAGVAR(hardcode_action, $1)" || + test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then # Fast installation is not supported enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi @@ -2144,7 +2214,7 @@ # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) - if test -n "$STRIP" ; then + if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) @@ -2162,6 +2232,47 @@ ])# _LT_CMD_STRIPLIB +# _LT_PREPARE_MUNGE_PATH_LIST +# --------------------------- +# Make sure func_munge_path_list() is defined correctly. +m4_defun([_LT_PREPARE_MUNGE_PATH_LIST], +[[# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x@S|@2 in + x) + ;; + *:) + eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\" + ;; + x:*) + eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\" + ;; + *) + eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\" + ;; + esac +} +]])# _LT_PREPARE_PATH_LIST + + # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics @@ -2172,17 +2283,18 @@ m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; + mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in @@ -2198,28 +2310,35 @@ ;; esac # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. + # and add multilib dir if necessary... lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; + lt_foo = "/" $lt_i lt_foo; } else { lt_count--; } @@ -2233,7 +2352,7 @@ # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else @@ -2242,7 +2361,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext_cmds=".so" +shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -2259,14 +2378,17 @@ # flags to be left without arguments need_version=unknown +AC_ARG_VAR([LT_SYS_LIBRARY_PATH], +[User-defined run-time library search path.]) + case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' + soname_spec='$libname$release$shared_ext$major' ;; aix[[4-9]]*) @@ -2274,41 +2396,91 @@ need_lib_prefix=no need_version=no hardcode_into_libs=yes - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a[(]lib.so.V[)]' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac shlibpath_var=LIBPATH fi ;; @@ -2318,18 +2490,18 @@ powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) - library_names_spec='${libname}${shared_ext}' + library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; @@ -2337,8 +2509,8 @@ bsdi[[45]]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" @@ -2350,7 +2522,7 @@ cygwin* | mingw* | pw32* | cegcc*) version_type=windows - shrext_cmds=".dll" + shrext_cmds=.dll need_version=no need_lib_prefix=no @@ -2359,8 +2531,8 @@ # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ @@ -2376,17 +2548,17 @@ case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' @@ -2395,8 +2567,8 @@ *,cl*) # Native MSVC libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' + soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' case $build_os in mingw*) @@ -2423,7 +2595,7 @@ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` @@ -2436,8 +2608,8 @@ esac # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' @@ -2450,7 +2622,7 @@ *) # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac @@ -2463,8 +2635,8 @@ version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' @@ -2477,8 +2649,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -2496,12 +2668,13 @@ version_type=freebsd-$objformat case $version_type in freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac @@ -2531,10 +2704,10 @@ need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -2552,14 +2725,15 @@ dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' @@ -2567,8 +2741,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; @@ -2577,8 +2751,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... @@ -2591,8 +2765,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -2603,7 +2777,7 @@ case $host_os in nonstopux*) version_type=nonstopux ;; *) - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix @@ -2611,8 +2785,8 @@ esac need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= @@ -2631,8 +2805,8 @@ esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; @@ -2641,13 +2815,33 @@ dynamic_linker=no ;; +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -2672,7 +2866,12 @@ # before this can be enabled. hardcode_into_libs=yes - # Append ld.so.conf contents to the search path + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" @@ -2704,12 +2903,12 @@ need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH @@ -2719,7 +2918,7 @@ newsos6) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; @@ -2728,58 +2927,68 @@ version_type=qnx need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; -openbsd*) +openbsd* | bitrig*) version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" + sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no else - shlibpath_overrides_runpath=yes + need_version=yes fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' - shrext_cmds=".dll" + version_type=windows + shrext_cmds=.dll + need_version=no need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) @@ -2790,8 +2999,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes @@ -2801,11 +3010,11 @@ sunos4*) version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes @@ -2813,8 +3022,8 @@ sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) @@ -2835,24 +3044,24 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf + version_type=sco need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' @@ -2870,7 +3079,7 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes @@ -2878,8 +3087,8 @@ uts4*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -2888,20 +3097,30 @@ ;; esac AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no +test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then +if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) @@ -2934,39 +3153,41 @@ [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) -_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], - [Run-time system search path for libraries]) +_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2], + [Detected run-time system search path for libraries]) +_LT_DECL([], [configure_time_lt_sys_library_path], [2], + [Explicit LT_SYS_LIBRARY_PATH set during ./configure time]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- -# find a file program which can recognize shared library +# find a file program that can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -f "$ac_dir/$1"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : @@ -2989,11 +3210,11 @@ break fi done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else @@ -3011,7 +3232,7 @@ # _LT_PATH_MAGIC # -------------- -# find a file program which can recognize a shared library +# find a file program that can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then @@ -3038,16 +3259,16 @@ AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], + [test no = "$withval" || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld -if test "$GCC" = yes; then +if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw + # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; @@ -3061,7 +3282,7 @@ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done - test -z "$LD" && LD="$ac_prog" + test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. @@ -3072,37 +3293,37 @@ with_gnu_ld=unknown ;; esac -elif test "$with_gnu_ld" = yes; then +elif test yes = "$with_gnu_ld"; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd], +[if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi]) +rm -f conftest.i conftest2.i conftest.out]) +])# _LT_PATH_DD + + +# _LT_CMD_TRUNCATE +# ---------------- +# find command to truncate a binary pipe +m4_defun([_LT_CMD_TRUNCATE], +[m4_require([_LT_PATH_DD]) +AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin], +[printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"]) +_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1], + [Command to truncate a binary pipe]) +])# _LT_CMD_TRUNCATE + + # _LT_CHECK_MAGIC_METHOD # ---------------------- # how to check for library dependencies @@ -3188,13 +3446,13 @@ # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. +# 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. case $host_os in aix[[4-9]]*) @@ -3221,8 +3479,7 @@ # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else @@ -3318,8 +3575,8 @@ lt_cv_deplibs_check_method=pass_all ;; -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' @@ -3372,6 +3629,9 @@ tpf*) lt_cv_deplibs_check_method=pass_all ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; esac ]) @@ -3412,33 +3672,38 @@ AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. - lt_cv_path_NM="$NM" + lt_cv_path_NM=$NM else - lt_nm_to_check="${ac_tool_prefix}nm" + lt_nm_to_check=${ac_tool_prefix}nm if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" - break + break 2 ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" - break + break 2 ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but @@ -3449,21 +3714,21 @@ esac fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} fi]) -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) - DUMPBIN="$DUMPBIN -symbols" + DUMPBIN="$DUMPBIN -symbols -headers" ;; *) DUMPBIN=: @@ -3471,8 +3736,8 @@ esac fi AC_SUBST([DUMPBIN]) - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" + if test : != "$DUMPBIN"; then + NM=$DUMPBIN fi fi test -z "$NM" && NM=nm @@ -3518,8 +3783,8 @@ case $host_os in cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib @@ -3531,7 +3796,7 @@ ;; *) # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" + lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac ]) @@ -3558,13 +3823,28 @@ lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) -if test "x$lt_cv_path_mainfest_tool" != xyes; then +if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ])# _LT_PATH_MANIFEST_TOOL +# _LT_DLL_DEF_P([FILE]) +# --------------------- +# True iff FILE is a Windows DLL '.def' file. +# Keep in sync with func_dll_def_p in the libtool script +AC_DEFUN([_LT_DLL_DEF_P], +[dnl + test DEF = "`$SED -n dnl + -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace + -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments + -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl + -e q dnl Only consider the first "real" line + $1`" dnl +])# _LT_DLL_DEF_P + + # LT_LIB_M # -------- # check for math library @@ -3576,11 +3856,11 @@ # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw) AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) - AC_CHECK_LIB(m, cos, LIBM="-lm") + AC_CHECK_LIB(m, cos, LIBM=-lm) ;; esac AC_SUBST([LIBM]) @@ -3599,7 +3879,7 @@ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $cc_basename in nvcc*) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; @@ -3651,7 +3931,7 @@ symcode='[[ABCDGISTW]]' ;; hpux*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then symcode='[[ABCDEGRST]]' fi ;; @@ -3684,14 +3964,44 @@ symcode='[[ABCDGIRSTW]]' ;; esac +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" # Handle CRLF in mingw tool chain opt_cr= @@ -3709,21 +4019,24 @@ # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" @@ -3763,11 +4076,11 @@ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT@&t@_DLSYM_CONST -#elif defined(__osf__) +#elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT@&t@_DLSYM_CONST #else @@ -3793,7 +4106,7 @@ { { "@PROGRAM@", (void *) 0 }, _LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; @@ -3813,9 +4126,9 @@ mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" + LIBS=conftstm.$ac_objext CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS @@ -3836,7 +4149,7 @@ rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then + if test yes = "$pipe_works"; then break else lt_cv_sys_global_symbol_pipe= @@ -3863,12 +4176,16 @@ [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1], + [Transform the output of nm into a list of symbols to manually relocate]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([nm_interface], [lt_cv_nm_interface], [1], + [The name lister interface]) _LT_DECL([], [nm_file_list_spec], [1], [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS @@ -3884,17 +4201,18 @@ m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then + if test yes = "$GXX"; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; amigaos*) @@ -3905,8 +4223,8 @@ ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac @@ -3922,6 +4240,11 @@ # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac ;; darwin* | rhapsody*) # PIC is the default on this platform @@ -3971,7 +4294,7 @@ case $host_os in aix[[4-9]]*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else @@ -4012,14 +4335,14 @@ case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + if test ia64 != "$host_cpu"; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default @@ -4056,7 +4379,7 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) - # old Intel C++ for x86_64 which still supported -KPIC. + # old Intel C++ for x86_64, which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' @@ -4201,17 +4524,18 @@ fi ], [ - if test "$GCC" = yes; then + if test yes = "$GCC"; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; amigaos*) @@ -4222,8 +4546,8 @@ ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac @@ -4240,6 +4564,11 @@ # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac ;; darwin* | rhapsody*) @@ -4310,7 +4639,7 @@ case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else @@ -4318,11 +4647,30 @@ fi ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac ;; hpux9* | hpux10* | hpux11*) @@ -4338,7 +4686,7 @@ ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) @@ -4349,7 +4697,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. + # old Intel for x86_64, which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' @@ -4374,6 +4722,12 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) @@ -4471,7 +4825,7 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi @@ -4500,7 +4854,7 @@ fi ]) case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: + # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; @@ -4566,17 +4920,21 @@ case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi ;; pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds ;; cygwin* | mingw* | cegcc*) case $cc_basename in @@ -4625,9 +4983,9 @@ # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if @@ -4643,7 +5001,7 @@ # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. - if test "$GCC" != yes; then + if test yes != "$GCC"; then with_gnu_ld=no fi ;; @@ -4651,7 +5009,7 @@ # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; - openbsd*) + openbsd* | bitrig*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) @@ -4664,7 +5022,7 @@ # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility @@ -4686,24 +5044,24 @@ esac fi - if test "$lt_use_gnu_ld_interface" = yes; then + if test yes = "$lt_use_gnu_ld_interface"; then # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' + wlarc='$wl' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no - case `$LD -v 2>&1` in + case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... @@ -4716,7 +5074,7 @@ case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then + if test ia64 != "$host_cpu"; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 @@ -4735,7 +5093,7 @@ case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) @@ -4751,7 +5109,7 @@ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -4761,7 +5119,7 @@ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes @@ -4769,61 +5127,89 @@ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no - if test "$host_os" = linux-dietlibc; then + if test linux-dietlibc = "$host_os"; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no + && test no = "$tmp_diet" then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -4834,42 +5220,47 @@ lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac - _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in + tcc*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic' + ;; xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -4883,8 +5274,8 @@ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -4902,8 +5293,8 @@ _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -4915,7 +5306,7 @@ _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify @@ -4930,9 +5321,9 @@ # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -4949,15 +5340,15 @@ *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac - if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= @@ -4973,7 +5364,7 @@ # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported @@ -4981,34 +5372,57 @@ ;; aix[[4-9]]*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' - no_entry_flag="" + no_entry_flag= else # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then aix_use_runtimelinking=yes break fi done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi ;; esac @@ -5027,13 +5441,21 @@ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + _LT_TAGVAR(file_list_spec, $1)='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + ;; + esac - if test "$GCC" = yes; then + if test yes = "$GCC"; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` + collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then @@ -5052,62 +5474,80 @@ ;; esac shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' fi - _LT_TAGVAR(link_all_deplibs, $1)=no + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' else # not using gcc - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' else - shared_flag='${wl}-bM:SRE' + shared_flag='$wl-bM:SRE' fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' fi fi - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + if test ia64 = "$host_cpu"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' + if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' fi fi ;; @@ -5116,7 +5556,7 @@ case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) @@ -5146,16 +5586,17 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes @@ -5164,18 +5605,18 @@ # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' ;; *) # Assume MSVC wrapper @@ -5184,7 +5625,7 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. @@ -5234,33 +5675,33 @@ ;; hpux9*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test yes,no = "$GCC,$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes @@ -5268,25 +5709,25 @@ ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test yes,no = "$GCC,$with_gnu_ld"; then case $host_cpu in hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) m4_if($1, [], [ @@ -5294,14 +5735,14 @@ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) _LT_LINKER_OPTION([if $CC understands -b], _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in @@ -5312,7 +5753,7 @@ *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. @@ -5323,16 +5764,16 @@ ;; irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], [lt_cv_irix_exported_symbol], - [save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + [save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" AC_LINK_IFELSE( [AC_LANG_SOURCE( [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], @@ -5345,21 +5786,32 @@ end]])])], [lt_cv_irix_exported_symbol=yes], [lt_cv_irix_exported_symbol=no]) - LDFLAGS="$save_LDFLAGS"]) - if test "$lt_cv_irix_exported_symbol" = yes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + LDFLAGS=$save_LDFLAGS]) + if test yes = "$lt_cv_irix_exported_symbol"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi + _LT_TAGVAR(link_all_deplibs, $1)=no else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + _LT_TAGVAR(ld_shlibs, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out @@ -5374,7 +5826,7 @@ newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; @@ -5382,27 +5834,19 @@ *nto* | *qnx*) ;; - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' fi else _LT_TAGVAR(ld_shlibs, $1)=no @@ -5413,33 +5857,53 @@ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; osf3*) - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + if test yes = "$GCC"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -5450,24 +5914,24 @@ solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + wlarc='$wl' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' - _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + wlarc='$wl' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi @@ -5477,11 +5941,11 @@ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', + # but understands '-z linker_flag'. GCC discards it without '$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + if test yes = "$GCC"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi @@ -5491,10 +5955,10 @@ ;; sunos4*) - if test "x$host_vendor" = xsequent; then + if test sequent = "$host_vendor"; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -5543,43 +6007,43 @@ ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not + # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; @@ -5594,17 +6058,17 @@ ;; esac - if test x$host_vendor = xsni; then + if test sni = "$host_vendor"; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld @@ -5621,7 +6085,7 @@ # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then + if test yes,yes = "$GCC,$enable_shared"; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. @@ -5701,12 +6165,12 @@ _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes DIR into the resulting binary and the resulting library dependency is - "absolute", i.e impossible to change by setting ${shlibpath_var} if the + "absolute", i.e impossible to change by setting $shlibpath_var if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR @@ -5747,10 +6211,10 @@ # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. +# the compiler configuration to 'libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl -lt_save_CC="$CC" +lt_save_CC=$CC AC_LANG_PUSH(C) # Source file extension for C test sources. @@ -5790,18 +6254,18 @@ LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB - # Report which library types will actually be built + # Report what library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no + test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) - test "$enable_shared" = yes && enable_static=no + test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' @@ -5809,8 +6273,12 @@ ;; aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac fi ;; esac @@ -5818,13 +6286,13 @@ AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes + test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP -CC="$lt_save_CC" +CC=$lt_save_CC ])# _LT_LANG_C_CONFIG @@ -5832,14 +6300,14 @@ # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. +# the compiler configuration to 'libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then +if test -n "$CXX" && ( test no != "$CXX" && + ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || + (test g++ != "$CXX"))); then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes @@ -5881,7 +6349,7 @@ # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then +if test yes != "$_lt_caught_CXX_error"; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" @@ -5923,35 +6391,35 @@ if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately - if test "$GXX" = yes; then + if test yes = "$GXX"; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi - if test "$GXX" = yes; then + if test yes = "$GXX"; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + if test yes = "$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) - wlarc='${wl}' + wlarc='$wl' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi @@ -5987,18 +6455,30 @@ _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' - no_entry_flag="" + no_entry_flag= else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in @@ -6008,6 +6488,13 @@ ;; esac done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi ;; esac @@ -6026,13 +6513,21 @@ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + _LT_TAGVAR(file_list_spec, $1)='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + ;; + esac - if test "$GXX" = yes; then + if test yes = "$GXX"; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` + collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then @@ -6050,64 +6545,84 @@ fi esac shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag=$shared_flag' $wl-G' fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' else # not using gcc - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' else - shared_flag='${wl}-bM:SRE' + shared_flag='$wl-bM:SRE' fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' fi fi - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # The "-G" linker flag allows undefined symbols. + _LT_TAGVAR(no_undefined_flag, $1)='-bernotok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + if test ia64 = "$host_cpu"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' + if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared + # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' fi fi ;; @@ -6117,7 +6632,7 @@ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -6145,57 +6660,58 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -6206,6 +6722,34 @@ _LT_DARWIN_LINKER_FEATURES($1) ;; + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + dgux*) case $cc_basename in ec++*) @@ -6241,14 +6785,14 @@ ;; haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default @@ -6260,7 +6804,7 @@ _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -6269,11 +6813,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + if test yes = "$GXX"; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no @@ -6283,15 +6827,15 @@ ;; hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' ;; esac fi @@ -6317,13 +6861,13 @@ aCC*) case $host_cpu in hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists @@ -6334,20 +6878,20 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then case $host_cpu in hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -6362,22 +6906,22 @@ interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -6386,17 +6930,17 @@ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; @@ -6409,8 +6953,8 @@ # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -6419,10 +6963,10 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. @@ -6436,59 +6980,59 @@ # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac - _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' ;; cxx*) # Compaq C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -6502,18 +7046,18 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi ;; *) @@ -6521,10 +7065,10 @@ *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on @@ -6582,22 +7126,17 @@ _LT_TAGVAR(ld_shlibs, $1)=yes ;; - openbsd2*) - # C++ shared libraries are fairly broken - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else @@ -6613,9 +7152,9 @@ # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using @@ -6633,17 +7172,17 @@ cxx*) case $host in osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ + $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac @@ -6658,21 +7197,21 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + if test yes,no = "$GXX,$with_gnu_ld"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' case $host in osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists @@ -6718,9 +7257,9 @@ # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -6728,7 +7267,7 @@ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. + # but understands '-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; @@ -6745,30 +7284,30 @@ ;; gcx*) # Green Hills C++ Compiler - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if test yes,no = "$GXX,$with_gnu_ld"; then + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else - # g++ 2.7 appears to require `-G' NOT `-shared' on this + # g++ 2.7 appears to require '-G' NOT '-shared' on this # platform. - _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -6776,11 +7315,11 @@ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' ;; esac fi @@ -6789,52 +7328,52 @@ ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not + # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ - '"$_LT_TAGVAR(old_archive_cmds, $1)" + '"$_LT_TAGVAR(old_archive_cmds, $1)" _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ - '"$_LT_TAGVAR(reload_cmds, $1)" + '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; @@ -6865,10 +7404,10 @@ esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) - test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no - _LT_TAGVAR(GCC, $1)="$GXX" - _LT_TAGVAR(LD, $1)="$LD" + _LT_TAGVAR(GCC, $1)=$GXX + _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change @@ -6895,7 +7434,7 @@ lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes +fi # test yes != "$_lt_caught_CXX_error" AC_LANG_POP ])# _LT_LANG_CXX_CONFIG @@ -6917,13 +7456,14 @@ AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) func_stripname_cnf () { - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + case @S|@2 in + .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;; + *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;; esac } # func_stripname_cnf ])# _LT_FUNC_STRIPNAME_CNF + # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose @@ -7007,13 +7547,13 @@ pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in + case $prev$p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. - if test $p = "-L" || - test $p = "-R"; then + if test x-L = "$p" || + test x-R = "$p"; then prev=$p continue fi @@ -7029,16 +7569,16 @@ case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac - if test "$pre_test_object_deps_done" = no; then - case ${prev} in + if test no = "$pre_test_object_deps_done"; then + case $prev in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p else - _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p" fi ;; # The "-l" case would never come before the object being @@ -7046,9 +7586,9 @@ esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then - _LT_TAGVAR(postdeps, $1)="${prev}${p}" + _LT_TAGVAR(postdeps, $1)=$prev$p else - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p" fi fi prev= @@ -7063,15 +7603,15 @@ continue fi - if test "$pre_test_object_deps_done" = no; then + if test no = "$pre_test_object_deps_done"; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then - _LT_TAGVAR(predep_objects, $1)="$p" + _LT_TAGVAR(predep_objects, $1)=$p else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then - _LT_TAGVAR(postdep_objects, $1)="$p" + _LT_TAGVAR(postdep_objects, $1)=$p else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi @@ -7102,51 +7642,6 @@ _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC* | sunCC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; esac ]) @@ -7155,7 +7650,7 @@ esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then - _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) @@ -7175,10 +7670,10 @@ # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. +# to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_LANG_PUSH(Fortran 77) -if test -z "$F77" || test "X$F77" = "Xno"; then +if test -z "$F77" || test no = "$F77"; then _lt_disable_F77=yes fi @@ -7215,7 +7710,7 @@ # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_F77" != yes; then +if test yes != "$_lt_disable_F77"; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t @@ -7237,7 +7732,7 @@ _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. - lt_save_CC="$CC" + lt_save_CC=$CC lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} @@ -7251,21 +7746,25 @@ AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no + test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) - test "$enable_shared" = yes && enable_static=no + test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac fi ;; esac @@ -7273,11 +7772,11 @@ AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes + test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) - _LT_TAGVAR(GCC, $1)="$G77" - _LT_TAGVAR(LD, $1)="$LD" + _LT_TAGVAR(GCC, $1)=$G77 + _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change @@ -7294,9 +7793,9 @@ fi # test -n "$compiler" GCC=$lt_save_GCC - CC="$lt_save_CC" - CFLAGS="$lt_save_CFLAGS" -fi # test "$_lt_disable_F77" != yes + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test yes != "$_lt_disable_F77" AC_LANG_POP ])# _LT_LANG_F77_CONFIG @@ -7306,11 +7805,11 @@ # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. +# to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_LANG_PUSH(Fortran) -if test -z "$FC" || test "X$FC" = "Xno"; then +if test -z "$FC" || test no = "$FC"; then _lt_disable_FC=yes fi @@ -7347,7 +7846,7 @@ # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_FC" != yes; then +if test yes != "$_lt_disable_FC"; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t @@ -7369,7 +7868,7 @@ _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. - lt_save_CC="$CC" + lt_save_CC=$CC lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} @@ -7385,21 +7884,25 @@ AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no + test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) - test "$enable_shared" = yes && enable_static=no + test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac fi ;; esac @@ -7407,11 +7910,11 @@ AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes + test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) - _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" - _LT_TAGVAR(LD, $1)="$LD" + _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu + _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change @@ -7431,7 +7934,7 @@ GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS -fi # test "$_lt_disable_FC" != yes +fi # test yes != "$_lt_disable_FC" AC_LANG_POP ])# _LT_LANG_FC_CONFIG @@ -7441,7 +7944,7 @@ # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. +# to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE @@ -7475,7 +7978,7 @@ CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" +_LT_TAGVAR(LD, $1)=$LD _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. @@ -7512,7 +8015,7 @@ # -------------------------- # Ensure that the configuration variables for the GNU Go compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. +# to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_GO_CONFIG], [AC_REQUIRE([LT_PROG_GO])dnl AC_LANG_SAVE @@ -7546,7 +8049,7 @@ CFLAGS=$GOFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" +_LT_TAGVAR(LD, $1)=$LD _LT_CC_BASENAME([$compiler]) # Go did not exist at the time GCC didn't implicitly link libc in. @@ -7583,7 +8086,7 @@ # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. +# to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE @@ -7599,7 +8102,7 @@ lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" +lt_simple_link_test_code=$lt_simple_compile_test_code # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER @@ -7609,7 +8112,7 @@ _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. -lt_save_CC="$CC" +lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= @@ -7638,7 +8141,7 @@ [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) @@ -7749,7 +8252,7 @@ # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue + test ! -f "$lt_ac_sed" && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in @@ -7766,9 +8269,9 @@ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break + test 10 -lt "$lt_ac_count" && break lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then + if test "$lt_ac_count" -gt "$lt_ac_max"; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi @@ -7792,27 +8295,7 @@ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], -[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -AC_MSG_RESULT([$xsi_shell]) -_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) - -AC_MSG_CHECKING([whether the shell understands "+="]) -lt_shell_append=no -( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -AC_MSG_RESULT([$lt_shell_append]) -_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false @@ -7836,102 +8319,9 @@ ])# _LT_CHECK_SHELL_FEATURES -# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) -# ------------------------------------------------------ -# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and -# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. -m4_defun([_LT_PROG_FUNCTION_REPLACE], -[dnl { -sed -e '/^$1 ()$/,/^} # $1 /c\ -$1 ()\ -{\ -m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) -} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: -]) - - -# _LT_PROG_REPLACE_SHELLFNS -# ------------------------- -# Replace existing portable implementations of several shell functions with -# equivalent extended shell implementations where those features are available.. -m4_defun([_LT_PROG_REPLACE_SHELLFNS], -[if test x"$xsi_shell" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"}]) - - _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl - func_split_long_opt_name=${1%%=*} - func_split_long_opt_arg=${1#*=}]) - - _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl - func_split_short_opt_arg=${1#??} - func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) - - _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) - - _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) - - _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) -fi - -if test x"$lt_shell_append" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) - - _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl - func_quote_for_eval "${2}" -dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ - eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) -fi -]) - # _LT_PATH_CONVERSION_FUNCTIONS # ----------------------------- -# Determine which file name conversion functions should be used by +# Determine what file name conversion functions should be used by # func_to_host_file (and, implicitly, by func_to_host_path). These are needed # for certain cross-compile configurations and native mingw. m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], diff -Nru parlatype-1.5.4/libparlatype/m4/lt~obsolete.m4 parlatype-1.5.6/libparlatype/m4/lt~obsolete.m4 --- parlatype-1.5.4/libparlatype/m4/lt~obsolete.m4 2017-10-12 10:55:43.000000000 +0000 +++ parlatype-1.5.6/libparlatype/m4/lt~obsolete.m4 2018-04-09 18:22:30.000000000 +0000 @@ -1,6 +1,7 @@ # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # -# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software +# Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives @@ -11,7 +12,7 @@ # These exist entirely to fool aclocal when bootstrapping libtool. # -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN), # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # @@ -25,7 +26,7 @@ # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until diff -Nru parlatype-1.5.4/libparlatype/m4/ltoptions.m4 parlatype-1.5.6/libparlatype/m4/ltoptions.m4 --- parlatype-1.5.4/libparlatype/m4/ltoptions.m4 2017-10-12 10:55:43.000000000 +0000 +++ parlatype-1.5.6/libparlatype/m4/ltoptions.m4 2018-04-09 18:22:30.000000000 +0000 @@ -1,14 +1,14 @@ # Helper functions for option handling. -*- Autoconf -*- # -# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software +# Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. -# serial 7 ltoptions.m4 +# serial 8 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) @@ -29,7 +29,7 @@ [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), - [m4_warning([Unknown $1 option `$2'])])[]dnl + [m4_warning([Unknown $1 option '$2'])])[]dnl ]) @@ -75,13 +75,15 @@ dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither - dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl 'shared' nor 'disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], - [_LT_ENABLE_FAST_INSTALL]) + [_LT_ENABLE_FAST_INSTALL]) + _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4], + [_LT_WITH_AIX_SONAME([aix])]) ]) ])# _LT_SET_OPTIONS @@ -112,7 +114,7 @@ [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `dlopen' option into LT_INIT's first parameter.]) +put the 'dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: @@ -148,7 +150,7 @@ _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `win32-dll' option into LT_INIT's first parameter.]) +put the 'win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: @@ -157,9 +159,9 @@ # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- -# implement the --enable-shared flag, and supports the `shared' and -# `disable-shared' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +# implement the --enable-shared flag, and supports the 'shared' and +# 'disable-shared' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], @@ -172,14 +174,14 @@ *) enable_shared=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_shared=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) @@ -211,9 +213,9 @@ # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- -# implement the --enable-static flag, and support the `static' and -# `disable-static' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +# implement the --enable-static flag, and support the 'static' and +# 'disable-static' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], @@ -226,14 +228,14 @@ *) enable_static=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_static=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) @@ -265,9 +267,9 @@ # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- -# implement the --enable-fast-install flag, and support the `fast-install' -# and `disable-fast-install' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +# implement the --enable-fast-install flag, and support the 'fast-install' +# and 'disable-fast-install' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], @@ -280,14 +282,14 @@ *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) @@ -304,14 +306,14 @@ [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `fast-install' option into LT_INIT's first parameter.]) +the 'fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `disable-fast-install' option into LT_INIT's first parameter.]) +the 'disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: @@ -319,11 +321,64 @@ dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) +# _LT_WITH_AIX_SONAME([DEFAULT]) +# ---------------------------------- +# implement the --with-aix-soname flag, and support the `aix-soname=aix' +# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT +# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'. +m4_define([_LT_WITH_AIX_SONAME], +[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl +shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[[5-9]]*,yes) + AC_MSG_CHECKING([which variant of shared library versioning to provide]) + AC_ARG_WITH([aix-soname], + [AS_HELP_STRING([--with-aix-soname=aix|svr4|both], + [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])], + [case $withval in + aix|svr4|both) + ;; + *) + AC_MSG_ERROR([Unknown argument to --with-aix-soname]) + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname], + [AC_CACHE_VAL([lt_cv_with_aix_soname], + [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT) + with_aix_soname=$lt_cv_with_aix_soname]) + AC_MSG_RESULT([$with_aix_soname]) + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + +_LT_DECL([], [shared_archive_member_spec], [0], + [Shared archive member basename, for filename based shared library versioning on AIX])dnl +])# _LT_WITH_AIX_SONAME + +LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])]) +LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])]) +LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])]) + + # _LT_WITH_PIC([MODE]) # -------------------- -# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# implement the --with-pic flag, and support the 'pic-only' and 'no-pic' # LT_INIT options. -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], @@ -334,19 +389,17 @@ *) pic_mode=default # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for lt_pkg in $withval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac], - [pic_mode=default]) - -test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + [pic_mode=m4_default([$1], [default])]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC @@ -359,7 +412,7 @@ [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `pic-only' option into LT_INIT's first parameter.]) +put the 'pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: diff -Nru parlatype-1.5.4/libparlatype/m4/ltsugar.m4 parlatype-1.5.6/libparlatype/m4/ltsugar.m4 --- parlatype-1.5.4/libparlatype/m4/ltsugar.m4 2017-10-12 10:55:43.000000000 +0000 +++ parlatype-1.5.6/libparlatype/m4/ltsugar.m4 2018-04-09 18:22:30.000000000 +0000 @@ -1,6 +1,7 @@ # ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software +# Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives @@ -33,7 +34,7 @@ # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support -# Autoconf-2.59 which quotes differently. +# Autoconf-2.59, which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], @@ -44,7 +45,7 @@ # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different diff -Nru parlatype-1.5.4/libparlatype/m4/ltversion.m4 parlatype-1.5.6/libparlatype/m4/ltversion.m4 --- parlatype-1.5.4/libparlatype/m4/ltversion.m4 2017-10-12 10:55:43.000000000 +0000 +++ parlatype-1.5.6/libparlatype/m4/ltversion.m4 2018-04-09 18:22:30.000000000 +0000 @@ -1,6 +1,6 @@ # ltversion.m4 -- version numbers -*- Autoconf -*- # -# Copyright (C) 2004 Free Software Foundation, Inc. +# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives @@ -9,15 +9,15 @@ # @configure_input@ -# serial 3337 ltversion.m4 +# serial 4179 ltversion.m4 # This file is part of GNU Libtool -m4_define([LT_PACKAGE_VERSION], [2.4.2]) -m4_define([LT_PACKAGE_REVISION], [1.3337]) +m4_define([LT_PACKAGE_VERSION], [2.4.6]) +m4_define([LT_PACKAGE_REVISION], [2.4.6]) AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.4.2' -macro_revision='1.3337' +[macro_version='2.4.6' +macro_revision='2.4.6' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) diff -Nru parlatype-1.5.4/libparlatype/Makefile.in parlatype-1.5.6/libparlatype/Makefile.in --- parlatype-1.5.4/libparlatype/Makefile.in 2017-11-19 15:49:47.000000000 +0000 +++ parlatype-1.5.6/libparlatype/Makefile.in 2018-08-17 10:45:35.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -14,7 +14,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -79,10 +89,6 @@ host_triplet = @host@ @WITH_TESTS_TRUE@am__append_1 = tests subdir = . -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/configure $(am__configure_deps) \ - $(srcdir)/config.h.in compile config.guess config.rpath \ - config.sub depcomp install-sh missing ltmain.sh ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ @@ -93,6 +99,8 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d @@ -160,6 +168,9 @@ CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = data po src docs tests +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in compile \ + config.guess config.rpath config.sub depcomp install-sh \ + ltmain.sh missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) @@ -227,7 +238,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ @@ -296,6 +306,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -381,6 +392,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -428,7 +440,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -664,15 +675,15 @@ $(am__post_remove_distdir) dist-tarZ: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) @@ -708,17 +719,17 @@ esac chmod -R a-w $(distdir) chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_inst + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=.. --prefix="$$dc_install_base" \ + --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ @@ -921,6 +932,8 @@ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru parlatype-1.5.4/libparlatype/missing parlatype-1.5.6/libparlatype/missing --- parlatype-1.5.4/libparlatype/missing 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/libparlatype/missing 2018-04-09 18:22:52.000000000 +0000 @@ -3,7 +3,7 @@ scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify diff -Nru parlatype-1.5.4/libparlatype/po/ca.po parlatype-1.5.6/libparlatype/po/ca.po --- parlatype-1.5.4/libparlatype/po/ca.po 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/ca.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,25 +7,25 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" -"PO-Revision-Date: 2017-01-19 18:15+0000\n" +"POT-Creation-Date: 2018-06-04 14:59+0200\n" +"PO-Revision-Date: 2017-04-18 19:00+0000\n" "Last-Translator: VPablo \n" "Language-Team: Catalan \n" "Language: ca\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Launchpad-Export-Date: 2017-01-20 21:44+0000\n" -"X-Generator: Launchpad (build 18302)\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "URI no vàlida:%s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "No s'ha trobat el fitxer: %s" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "Ha fallat la càrrega d'un plugin." -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Carregant fitxer..." @@ -143,19 +157,19 @@ msgid "Failed to start GStreamer pipeline." msgstr "Ha fallat l'inici de la canonada GStreamer." -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "Segueix el cursor" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "Desplaça automàticament a la posició del cursor" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "Cursor fixe" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." @@ -163,24 +177,10 @@ "Si VERDADER, el cursor està a una posició fixa i la ona es mou.\n" "Si FALS, el curso es mou." -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "Mostra regla" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "Mostra la escala de temps amb marques" - -#~ msgctxt "long time format, 1 digit" -#~ msgid "%d:%02d:%02d.%01d" -#~ msgstr "%d:%02d:%02d.%01d" - -#~ msgctxt "shortest time format, 1 digit" -#~ msgid "%d:%02d.%01d" -#~ msgstr "%d:%02d.%01d" - -#~ msgid "Cursor position" -#~ msgstr "Posició del cursor" - -#~ msgid "Cursor's position in 1/1000 seconds" -#~ msgstr "Posició del cursor a 1/1000 segons" diff -Nru parlatype-1.5.4/libparlatype/po/de.po parlatype-1.5.6/libparlatype/po/de.po --- parlatype-1.5.4/libparlatype/po/de.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/de.po 2018-06-17 20:35:03.000000000 +0000 @@ -1,14 +1,14 @@ # German translations for parlatype. # Copyright (C) 2016 Gabor Karsay # This file is distributed under the same license as the parlatype package. -# Gabor Karsay , 2016. +# Gabor Karsay , 2016, 2018. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" -"PO-Revision-Date: 2016-12-04 15:50+0100\n" +"POT-Creation-Date: 2018-06-04 14:59+0200\n" +"PO-Revision-Date: 2018-01-09 19:24+0100\n" "Last-Translator: Gabor Karsay \n" "Language-Team: Deutsch <>\n" "Language: de\n" @@ -19,13 +19,13 @@ "X-Generator: Gtranslator 2.91.6\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "URI nicht gültig: %s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "Datei nicht gefunden: %s" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "Ein Plugin konnte nicht geladen werden." -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "Verbleibende Zeit: 1 Sekunde" +msgstr[1] "Verbleibende Zeit: %d Sekunden" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "Verbleibende Zeit: %d:%02d" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Lade Datei …" @@ -143,19 +157,19 @@ msgid "Failed to start GStreamer pipeline." msgstr "Die GStreamer-Pipeline konnte nicht gestartet werden." -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "Cursor folgen" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "Scrollt automatisch zur Cursorposition" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "Fixierter Cursor" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." @@ -164,11 +178,11 @@ "Wellenform bewegt sich.\n" "Wenn FALSCH, bewegt sich der Cursor." -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "Zeitskala anzeigen" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "Zeigt die Zeitskala mit Zeitmarkierungen" diff -Nru parlatype-1.5.4/libparlatype/po/en_GB.po parlatype-1.5.6/libparlatype/po/en_GB.po --- parlatype-1.5.4/libparlatype/po/en_GB.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/en_GB.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,25 +7,26 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" -"PO-Revision-Date: 2017-01-17 22:14+0000\n" -"Last-Translator: Anthony Harrington 😁 \n" +"POT-Creation-Date: 2018-06-04 15:00+0200\n" +"PO-Revision-Date: 2018-03-08 01:20+0000\n" +"Last-Translator: Andi Chandler \n" "Language-Team: English (United Kingdom) \n" -"Language: \n" +"Language: en_GB\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Launchpad-Export-Date: 2017-01-20 20:44+0000\n" -"X-Generator: Launchpad (build 18302)\n" +"Plural-Forms: nplurals=2; plural=n != 1;\n" +"X-Launchpad-Export-Date: 2018-03-08 16:40+0000\n" +"X-Generator: Launchpad (build 18566)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "URI not valid: %s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "File not found: %s" @@ -34,8 +35,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +46,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +56,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +66,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +76,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +86,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +96,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +107,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +117,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "Failed to load a plugin." -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "Time remaining: 1 second" +msgstr[1] "Time remaining: %d seconds" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "Time remaining: %d:%02d" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Loading file..." @@ -143,19 +158,19 @@ msgid "Failed to start GStreamer pipeline." msgstr "Failed to start GStreamer pipeline." -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "Follow cursor" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "Scroll automatically to the cursor's position" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "Fixed cursor" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." @@ -163,24 +178,10 @@ "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "Show ruler" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "Show the time scale with time marks" - -#~ msgctxt "long time format, 1 digit" -#~ msgid "%d:%02d:%02d.%01d" -#~ msgstr "%d:%02d:%02d.%01d" - -#~ msgctxt "shortest time format, 1 digit" -#~ msgid "%d:%02d.%01d" -#~ msgstr "%d:%02d.%01d" - -#~ msgid "Cursor position" -#~ msgstr "Cursor position" - -#~ msgid "Cursor's position in 1/1000 seconds" -#~ msgstr "Cursor's position in 1/1000 seconds" diff -Nru parlatype-1.5.4/libparlatype/po/es.po parlatype-1.5.6/libparlatype/po/es.po --- parlatype-1.5.4/libparlatype/po/es.po 2017-11-10 15:36:44.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/es.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,25 +7,25 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-04-18 20:55+0200\n" +"POT-Creation-Date: 2018-06-04 15:00+0200\n" "PO-Revision-Date: 2017-08-11 09:39+0000\n" "Last-Translator: Adolfo Jayme \n" "Language-Team: Spanish \n" +"Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Launchpad-Export-Date: 2017-11-10 15:36+0000\n" -"X-Generator: Launchpad (build 18498)\n" -"Language: es\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "URI no válido: %s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "Archivo no encontrado: %s" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:343 -#: ../src/pt-waveviewer.c:1075 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:348 -#: ../src/pt-waveviewer.c:1077 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d,%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "Ha fallado la carga de un complemento." -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Cargando el archivo…" @@ -143,19 +157,19 @@ msgid "Failed to start GStreamer pipeline." msgstr "Ha fallado el inicio de la tubería GStreamer." -#: ../src/pt-waveviewer.c:1443 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "Seguir cursor" -#: ../src/pt-waveviewer.c:1444 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "Desplaza automáticamente a la posición del cursor" -#: ../src/pt-waveviewer.c:1460 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "Cursor fijo" -#: ../src/pt-waveviewer.c:1461 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." @@ -163,10 +177,10 @@ "Si VERDADERO, el cursor está en una posición fija y la onda se mueve.\n" "Si FALSO, el cursor se mueve." -#: ../src/pt-waveviewer.c:1475 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "Muestra regla" -#: ../src/pt-waveviewer.c:1476 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "Muestra la escala de tiempo con marcas" diff -Nru parlatype-1.5.4/libparlatype/po/fi.po parlatype-1.5.6/libparlatype/po/fi.po --- parlatype-1.5.4/libparlatype/po/fi.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/fi.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,184 @@ +# Finnish translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" +"POT-Creation-Date: 2018-06-04 15:00+0200\n" +"PO-Revision-Date: 2017-11-20 19:36+0000\n" +"Last-Translator: Jiri Grönroos \n" +"Language-Team: Finnish \n" +"Language: fi\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" + +#. Translators: %s is a detailed error message. +#: ../src/pt-player.c:435 +#, c-format +msgid "URI not valid: %s" +msgstr "URI on virheellinen: %s" + +#. Translators: %s is a detailed error message. +#: ../src/pt-player.c:447 +#, c-format +msgid "File not found: %s" +msgstr "Tiedostoa ei löydy: %s" + +#. Translators: This is a time format, like "2:05:30" for 2 +#. hours, 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 +#, c-format +msgctxt "long time format" +msgid "%d:%02d:%02d" +msgstr "" + +#. Translators: This is a time format, like "2:05:30.1" for 2 +#. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may +#. change ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1137 +#, c-format +msgctxt "long time format, 1 digit" +msgid "%d:%02d:%02d.%d" +msgstr "" + +#. Translators: This is a time format, like "2:05:30.12" for 2 +#. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may +#. change ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1144 +#, c-format +msgctxt "long time format, 2 digits" +msgid "%d:%02d:%02d.%02d" +msgstr "" + +#. Translators: This is a time format, like "05:30" for +#. 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%I02d" instead +#. of "%02d" if your locale uses localized digits. +#: ../src/pt-player.c:1161 +#, c-format +msgctxt "short time format" +msgid "%02d:%02d" +msgstr "" + +#. Translators: This is a time format, like "05:30.1" for +#. 5 minutes, 30 seconds, and 1 tenthsecond. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1168 +#, c-format +msgctxt "short time format, 1 digit" +msgid "%02d:%02d.%d" +msgstr "" + +#. Translators: This is a time format, like "05:30.12" for +#. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1175 +#, c-format +msgctxt "short time format, 2 digits" +msgid "%02d:%02d.%02d" +msgstr "" + +#. Translators: This is a time format, like "5:30" for +#. 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 +#, c-format +msgctxt "shortest time format" +msgid "%d:%02d" +msgstr "" + +#. Translators: This is a time format, like "05:30.1" for +#. 5 minutes, 30 seconds, and 1 tenthsecond. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1195 +#, c-format +msgctxt "shortest time format, 1 digit" +msgid "%d:%02d.%d" +msgstr "" + +#. Translators: This is a time format, like "05:30.12" for +#. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1202 +#, c-format +msgctxt "shortest time format, 2 digits" +msgid "%d:%02d.%02d" +msgstr "" + +#: ../src/pt-player.c:1499 +#, c-format +msgid "Failed to load a plugin." +msgstr "Liitännäisen lataaminen epäonnistui." + +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 +msgid "Loading file..." +msgstr "Ladataan tiedostoa..." + +#: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 +msgid "Failed to open temporary file." +msgstr "Väliaikaistiedoston avaaminen epäonnistui." + +#: ../src/pt-waveloader.c:350 +msgid "Failed to setup GStreamer pipeline." +msgstr "" + +#: ../src/pt-waveloader.c:369 +msgid "Failed to start GStreamer pipeline." +msgstr "" + +#: ../src/pt-waveviewer.c:1331 +msgid "Follow cursor" +msgstr "" + +#: ../src/pt-waveviewer.c:1332 +msgid "Scroll automatically to the cursor's position" +msgstr "" + +#: ../src/pt-waveviewer.c:1348 +msgid "Fixed cursor" +msgstr "" + +#: ../src/pt-waveviewer.c:1349 +msgid "" +"If TRUE, the cursor is in a fixed position and the waveform is moving.\n" +"If FALSE, the cursor is moving." +msgstr "" + +#: ../src/pt-waveviewer.c:1363 +msgid "Show ruler" +msgstr "" + +#: ../src/pt-waveviewer.c:1364 +msgid "Show the time scale with time marks" +msgstr "" diff -Nru parlatype-1.5.4/libparlatype/po/fr.po parlatype-1.5.6/libparlatype/po/fr.po --- parlatype-1.5.4/libparlatype/po/fr.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/fr.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" +"POT-Creation-Date: 2018-06-04 15:00+0200\n" "PO-Revision-Date: 2017-01-25 11:24+0000\n" "Last-Translator: archi02 \n" "Language-Team: French \n" @@ -19,13 +19,13 @@ "X-Generator: Launchpad (build 18315)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "Adresse non valide : %s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "Fichier non trouvé: %s" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "Échec de chargement du plugin" -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Chargement du fichier..." @@ -143,19 +157,19 @@ msgid "Failed to start GStreamer pipeline." msgstr "Échec du lancement du pipeline Gstreamer." -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "Suivre le curseur" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "Défiler automatiquement jusqu'à la position du curseur" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "Curseur positionné" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." @@ -164,11 +178,11 @@ "représentant le spectre sonore se déplace.\n" "Si FAUX, le curseur se déplace." -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "Montrer la règle" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "Montrer l'échelle de temps avec les marqueurs" diff -Nru parlatype-1.5.4/libparlatype/po/he.po parlatype-1.5.6/libparlatype/po/he.po --- parlatype-1.5.4/libparlatype/po/he.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/he.po 2018-06-17 20:35:03.000000000 +0000 @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" +"POT-Creation-Date: 2018-06-04 15:00+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -19,13 +19,13 @@ "Plural-Forms: nplurals=2; plural=(n != 1)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "" -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "" @@ -143,28 +157,28 @@ msgid "Failed to start GStreamer pipeline." msgstr "" -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "" diff -Nru parlatype-1.5.4/libparlatype/po/id.po parlatype-1.5.6/libparlatype/po/id.po --- parlatype-1.5.4/libparlatype/po/id.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/id.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" +"POT-Creation-Date: 2018-06-04 15:00+0200\n" "PO-Revision-Date: 2017-01-18 08:13+0000\n" "Last-Translator: Ari Setyo Wibowo \n" "Language-Team: Indonesian \n" @@ -19,13 +19,13 @@ "X-Generator: Launchpad (build 18302)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "URI tidak benar: %s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "Berkas tidak ditemukan: %s" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "Gagal memuat plugin." -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Memuat file..." @@ -143,19 +157,19 @@ msgid "Failed to start GStreamer pipeline." msgstr "Gagal memulai GStreamer pipeline." -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "Ikuti kursor" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "Scroll otomatis ke posisi kursor" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "Kursor tetap" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." @@ -163,11 +177,11 @@ "Jika BENAR, kursor dalam posisi tetap dan bentuk gelombang bergerak.\n" "Jika SALAH, kursor bergerak." -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "Tunjukkan penggaris" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "Tunjukkan skala waktu dengan tanda waktu" diff -Nru parlatype-1.5.4/libparlatype/po/it.po parlatype-1.5.6/libparlatype/po/it.po --- parlatype-1.5.4/libparlatype/po/it.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/it.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" +"POT-Creation-Date: 2018-06-04 15:00+0200\n" "PO-Revision-Date: 2017-01-17 16:59+0000\n" "Last-Translator: Luca Ciavatta \n" "Language-Team: Italian \n" @@ -19,13 +19,13 @@ "X-Generator: Launchpad (build 18315)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "URI non valido: %s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "File non trovato: %s" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "Impossibile caricare un plugin." -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Caricamento file..." @@ -143,19 +157,19 @@ msgid "Failed to start GStreamer pipeline." msgstr "Impossibile avviare la pipeline di GStreamer." -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "Seguire il cursore" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "Andare automaticamente alla posizione del cursore" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "Cursore fisso" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." @@ -164,11 +178,11 @@ "movimento.\n" "Se FALSE, il cursore si muove." -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "Mostra righello" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "Mostra la scala di tempo con i marcatori temporali" diff -Nru parlatype-1.5.4/libparlatype/po/ja.po parlatype-1.5.6/libparlatype/po/ja.po --- parlatype-1.5.4/libparlatype/po/ja.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/ja.po 2018-06-17 20:35:03.000000000 +0000 @@ -1,31 +1,32 @@ # Japanese translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. -# Shinichirou Yamada , 2017. +# FIRST AUTHOR , 2017. # msgid "" msgstr "" -"Project-Id-Version: parlatype 1.5\n" +"Project-Id-Version: parlatype\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-04-18 20:55+0200\n" +"POT-Creation-Date: 2018-06-04 15:00+0200\n" "PO-Revision-Date: 2017-07-25 15:54+0000\n" -"Last-Translator: Shinichirou Yamada " -"\n" +"Last-Translator: Shinichirou Yamada \n" "Language-Team: Japanese \n" +"Language: ja\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Launchpad-Export-Date: 2017-07-30 07:24+0000\n" -"X-Generator: Launchpad (build 18441)\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "URI が無効です: %s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "ファイルが見つかりません: %s" @@ -34,8 +35,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:343 -#: ../src/pt-waveviewer.c:1075 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +46,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +56,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +66,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +76,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +86,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +96,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:348 -#: ../src/pt-waveviewer.c:1077 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +107,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +117,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "プラグインを読み込めませんでした。" -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "ファイルを読み込み中..." @@ -143,19 +158,19 @@ msgid "Failed to start GStreamer pipeline." msgstr "GStreamer パイプラインのスタートに失敗しました。" -#: ../src/pt-waveviewer.c:1443 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "カーソルに追従する" -#: ../src/pt-waveviewer.c:1444 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "カーソルの位置へ自動的にスクロールする" -#: ../src/pt-waveviewer.c:1460 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "カーソルを固定する" -#: ../src/pt-waveviewer.c:1461 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." @@ -163,10 +178,10 @@ "TRUE の場合、カーソルの位置は固定され、波形が動きます。\n" "FALSE の場合、カーソルが動きます。" -#: ../src/pt-waveviewer.c:1475 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "ルーラーを表示する" -#: ../src/pt-waveviewer.c:1476 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "タイムマークの付いたタイムスケールを表示する" diff -Nru parlatype-1.5.4/libparlatype/po/kab.po parlatype-1.5.6/libparlatype/po/kab.po --- parlatype-1.5.4/libparlatype/po/kab.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/kab.po 2018-06-17 20:35:03.000000000 +0000 @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" +"POT-Creation-Date: 2018-06-04 15:00+0200\n" "PO-Revision-Date: 2017-01-17 15:16+0000\n" "Last-Translator: Slimane Amiri \n" "Language-Team: Kabyle \n" @@ -20,13 +20,13 @@ "X-Generator: Launchpad (build 18315)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "Tansa URI mačči d tameɣtut: %s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "Ulac afaylu: %s" @@ -35,8 +35,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -46,7 +46,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -56,7 +56,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -66,7 +66,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -76,7 +76,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -86,7 +86,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -96,8 +96,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -107,7 +107,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -117,18 +117,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "Ur izmir ara ad d-isali ameṭaḍ" -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Asali n ufaylu..." @@ -144,29 +158,29 @@ msgid "Failed to start GStreamer pipeline." msgstr "Ur izmir ara ad isenker ajeɛbub GStreamer." -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "Ḍfer taḥnaccaṭ" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "" diff -Nru parlatype-1.5.4/libparlatype/po/ku.po parlatype-1.5.6/libparlatype/po/ku.po --- parlatype-1.5.4/libparlatype/po/ku.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/ku.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" +"POT-Creation-Date: 2018-06-04 15:00+0200\n" "PO-Revision-Date: 2017-02-15 09:03+0000\n" "Last-Translator: Rokar ✌ \n" "Language-Team: Kurdish \n" @@ -19,13 +19,13 @@ "X-Generator: Launchpad (build 18331)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "" -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "" @@ -143,29 +157,29 @@ msgid "Failed to start GStreamer pipeline." msgstr "" -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "" diff -Nru parlatype-1.5.4/libparlatype/po/LINGUAS parlatype-1.5.6/libparlatype/po/LINGUAS --- parlatype-1.5.4/libparlatype/po/LINGUAS 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/LINGUAS 2018-06-17 20:35:03.000000000 +0000 @@ -2,6 +2,7 @@ de en_GB es +fi fr he id @@ -13,4 +14,7 @@ lv ms nl +pl pt +sk +sv diff -Nru parlatype-1.5.4/libparlatype/po/lt.po parlatype-1.5.6/libparlatype/po/lt.po --- parlatype-1.5.4/libparlatype/po/lt.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/lt.po 2018-06-17 20:35:03.000000000 +0000 @@ -1,30 +1,33 @@ # Lithuanian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. -# Moo , 2017. +# FIRST AUTHOR , 2017. # msgid "" msgstr "" -"Project-Id-Version: parlatype 1.5\n" +"Project-Id-Version: parlatype\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-04-18 20:55+0200\n" -"PO-Revision-Date: 2017-07-04 09:18+0000\n" +"POT-Creation-Date: 2018-06-04 15:01+0200\n" +"PO-Revision-Date: 2018-03-03 10:22+0000\n" "Last-Translator: Moo \n" "Language-Team: Lithuanian \n" +"Language: lt\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Launchpad-Export-Date: 2017-07-06 17:52+0000\n" -"X-Generator: Launchpad (build 18419)\n" +"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n" +"%100<10 || n%100>=20) ? 1 : 2;\n" +"X-Launchpad-Export-Date: 2018-03-08 16:40+0000\n" +"X-Generator: Launchpad (build 18566)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "Neteisingas URI: %s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "Failas nerastas: %s" @@ -33,8 +36,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:343 -#: ../src/pt-waveviewer.c:1075 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -44,7 +47,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -54,7 +57,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -64,7 +67,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -74,7 +77,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -84,7 +87,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -94,8 +97,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:348 -#: ../src/pt-waveviewer.c:1077 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -105,7 +108,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -115,18 +118,33 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "Nepavyko įkelti įskiepio." -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "Liko: %d sekundė" +msgstr[1] "Liko: %d sekundės" +msgstr[2] "Liko: %d sekundžių" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "Liko: %d:%02d" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Įkeliamas failas..." @@ -142,19 +160,19 @@ msgid "Failed to start GStreamer pipeline." msgstr "Nepavyko paleisti GStreamer komandų grandinės." -#: ../src/pt-waveviewer.c:1443 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "Sekti paskui žymeklį" -#: ../src/pt-waveviewer.c:1444 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "Automatiškai slinkti į žymeklio poziciją" -#: ../src/pt-waveviewer.c:1460 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "Fiksuotas žymeklis" -#: ../src/pt-waveviewer.c:1461 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." @@ -162,10 +180,10 @@ "Jei TEISINGA, bangos formai judant, žymeklis liks fiksuotoje pozicijoje.\n" "Jei NETEISINGA, žymeklis judės." -#: ../src/pt-waveviewer.c:1475 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "Rodyti liniuotę" -#: ../src/pt-waveviewer.c:1476 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "Rodyti laiko mastelį su laiko žymėmis" diff -Nru parlatype-1.5.4/libparlatype/po/lv.po parlatype-1.5.6/libparlatype/po/lv.po --- parlatype-1.5.4/libparlatype/po/lv.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/lv.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" +"POT-Creation-Date: 2018-06-04 15:01+0200\n" "PO-Revision-Date: 2017-01-17 21:20+0000\n" "Last-Translator: Jānis Marks Gailis \n" "Language-Team: Latvian \n" @@ -19,13 +19,13 @@ "X-Generator: Launchpad (build 18315)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "Datne nav atrasta: %s" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "" -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Ielādē datni…" @@ -143,28 +157,28 @@ msgid "Failed to start GStreamer pipeline." msgstr "" -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "" diff -Nru parlatype-1.5.4/libparlatype/po/Makefile.in.in parlatype-1.5.6/libparlatype/po/Makefile.in.in --- parlatype-1.5.4/libparlatype/po/Makefile.in.in 2017-10-12 10:55:18.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/Makefile.in.in 2018-04-09 18:21:49.000000000 +0000 @@ -33,8 +33,7 @@ datadir = @datadir@ datarootdir = @datarootdir@ libdir = @libdir@ -DATADIRNAME = @DATADIRNAME@ -itlocaledir = $(prefix)/$(DATADIRNAME)/locale +localedir = @localedir@ subdir = po install_sh = @install_sh@ # Automake >= 1.8 provides @mkdir_p@. @@ -80,7 +79,7 @@ .po.pox: $(MAKE) $(GETTEXT_PACKAGE).pot - $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox + $(MSGMERGE) $* $(GETTEXT_PACKAGE).pot -o $*.pox .po.mo: $(INTLTOOL_V_MSGFMT)$(MSGFMT) -o $@ $< @@ -108,7 +107,7 @@ install-data-yes: all linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ - dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ + dir=$(DESTDIR)$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $$dir; \ if test -r $$lang.gmo; then \ $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ @@ -142,8 +141,8 @@ uninstall: linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ + rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ + rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ done check: all $(GETTEXT_PACKAGE).pot diff -Nru parlatype-1.5.4/libparlatype/po/Makevars parlatype-1.5.6/libparlatype/po/Makevars --- parlatype-1.5.4/libparlatype/po/Makevars 2017-11-02 10:50:28.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/Makevars 2018-06-17 20:35:03.000000000 +0000 @@ -8,7 +8,7 @@ top_builddir = .. # These options get passed to xgettext. -XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ --keyword=C_:1c,2 +XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ --keyword=C_:1c,2 --keyword=g_dngettext:2,3 # This is the copyright holder that gets inserted into the header of the # $(DOMAIN).pot file. Set this to the copyright holder of the surrounding diff -Nru parlatype-1.5.4/libparlatype/po/ms.po parlatype-1.5.6/libparlatype/po/ms.po --- parlatype-1.5.4/libparlatype/po/ms.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/ms.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" +"POT-Creation-Date: 2018-06-04 15:01+0200\n" "PO-Revision-Date: 2017-02-01 03:48+0000\n" "Last-Translator: abuyop \n" "Language-Team: Malay \n" @@ -19,13 +19,13 @@ "X-Generator: Launchpad (build 18331)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "Fail tidak ditemui: %s" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "" -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Memuatkan fail" @@ -143,29 +157,29 @@ msgid "Failed to start GStreamer pipeline." msgstr "" -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "" diff -Nru parlatype-1.5.4/libparlatype/po/nl.po parlatype-1.5.6/libparlatype/po/nl.po --- parlatype-1.5.4/libparlatype/po/nl.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/nl.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-04-18 20:55+0200\n" +"POT-Creation-Date: 2018-06-04 15:01+0200\n" "PO-Revision-Date: 2017-06-26 09:37+0000\n" "Last-Translator: Heimen Stoffels \n" "Language-Team: Dutch \n" +"Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -18,13 +19,13 @@ "X-Generator: Launchpad (build 18418)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "URI is ongeldig: %s" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "Bestand niet gevonden: %s" @@ -33,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:343 -#: ../src/pt-waveviewer.c:1075 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -44,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -54,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -64,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -74,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -84,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -94,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:348 -#: ../src/pt-waveviewer.c:1077 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -105,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -115,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "Laden van een plug-in is mislukt." -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "Bezig met laden van bestand..." @@ -142,19 +157,19 @@ msgid "Failed to start GStreamer pipeline." msgstr "GStreamer-pipeline starten is mislukt." -#: ../src/pt-waveviewer.c:1443 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "Cursor volgen" -#: ../src/pt-waveviewer.c:1444 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "Automatisch scrollen naar de cursorpositie" -#: ../src/pt-waveviewer.c:1460 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "Vastgezette cursor" -#: ../src/pt-waveviewer.c:1461 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." @@ -163,10 +178,10 @@ "golfvorm.\n" "Als dit wordt ingesteld op FALSE, dan beweegt de cursor." -#: ../src/pt-waveviewer.c:1475 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "Liniaal weergeven" -#: ../src/pt-waveviewer.c:1476 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "Tijdschaal weergeven met tijdmarkeringen" diff -Nru parlatype-1.5.4/libparlatype/po/pl.po parlatype-1.5.6/libparlatype/po/pl.po --- parlatype-1.5.4/libparlatype/po/pl.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/pl.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,190 @@ +# Polish translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" +"POT-Creation-Date: 2018-06-04 15:01+0200\n" +"PO-Revision-Date: 2018-03-01 15:32+0000\n" +"Last-Translator: Piotr Drąg \n" +"Language-Team: Polish \n" +"Language: pl\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " +"|| n%100>=20) ? 1 : 2;\n" +"X-Launchpad-Export-Date: 2018-03-08 16:36+0000\n" +"X-Generator: Launchpad (build 18566)\n" + +#. Translators: %s is a detailed error message. +#: ../src/pt-player.c:435 +#, c-format +msgid "URI not valid: %s" +msgstr "Adres URI jest nieprawidłowy: %s" + +#. Translators: %s is a detailed error message. +#: ../src/pt-player.c:447 +#, c-format +msgid "File not found: %s" +msgstr "Nie odnaleziono pliku: %s" + +#. Translators: This is a time format, like "2:05:30" for 2 +#. hours, 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 +#, c-format +msgctxt "long time format" +msgid "%d:%02d:%02d" +msgstr "%d∶%02d∶%02d" + +#. Translators: This is a time format, like "2:05:30.1" for 2 +#. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may +#. change ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1137 +#, c-format +msgctxt "long time format, 1 digit" +msgid "%d:%02d:%02d.%d" +msgstr "%d∶%02d∶%02d.%d" + +#. Translators: This is a time format, like "2:05:30.12" for 2 +#. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may +#. change ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1144 +#, c-format +msgctxt "long time format, 2 digits" +msgid "%d:%02d:%02d.%02d" +msgstr "%d∶%02d∶%02d.%02d" + +#. Translators: This is a time format, like "05:30" for +#. 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%I02d" instead +#. of "%02d" if your locale uses localized digits. +#: ../src/pt-player.c:1161 +#, c-format +msgctxt "short time format" +msgid "%02d:%02d" +msgstr "%02d∶%02d" + +#. Translators: This is a time format, like "05:30.1" for +#. 5 minutes, 30 seconds, and 1 tenthsecond. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1168 +#, c-format +msgctxt "short time format, 1 digit" +msgid "%02d:%02d.%d" +msgstr "%02d∶%02d.%d" + +#. Translators: This is a time format, like "05:30.12" for +#. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1175 +#, c-format +msgctxt "short time format, 2 digits" +msgid "%02d:%02d.%02d" +msgstr "%02d∶%02d.%02d" + +#. Translators: This is a time format, like "5:30" for +#. 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 +#, c-format +msgctxt "shortest time format" +msgid "%d:%02d" +msgstr "%d∶%02d" + +#. Translators: This is a time format, like "05:30.1" for +#. 5 minutes, 30 seconds, and 1 tenthsecond. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1195 +#, c-format +msgctxt "shortest time format, 1 digit" +msgid "%d:%02d.%d" +msgstr "%d∶%02d.%d" + +#. Translators: This is a time format, like "05:30.12" for +#. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1202 +#, c-format +msgctxt "shortest time format, 2 digits" +msgid "%d:%02d.%02d" +msgstr "%d∶%02d.%02d" + +#: ../src/pt-player.c:1499 +#, c-format +msgid "Failed to load a plugin." +msgstr "Wczytanie wtyczki się nie powiodło." + +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "Pozostały czas: 1 sekunda" +msgstr[1] "Pozostały czas: %d sekundy" +msgstr[2] "Pozostały czas: %d sekund" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "Pozostały czas: %d∶%02d" + +#: ../src/pt-progress-dialog.c:242 +msgid "Loading file..." +msgstr "Wczytywanie pliku…" + +#: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 +msgid "Failed to open temporary file." +msgstr "Otwarcie pliku tymczasowego się nie powiodło." + +#: ../src/pt-waveloader.c:350 +msgid "Failed to setup GStreamer pipeline." +msgstr "Konfiguracja potoku biblioteki GStreamer się nie powiodła." + +#: ../src/pt-waveloader.c:369 +msgid "Failed to start GStreamer pipeline." +msgstr "Rozpoczęcie potoku biblioteki GStreamer się nie powiodło." + +#: ../src/pt-waveviewer.c:1331 +msgid "Follow cursor" +msgstr "Podążanie za kursorem" + +#: ../src/pt-waveviewer.c:1332 +msgid "Scroll automatically to the cursor's position" +msgstr "Automatyczne przewijanie do pozycji kursora" + +#: ../src/pt-waveviewer.c:1348 +msgid "Fixed cursor" +msgstr "Stały kursor" + +#: ../src/pt-waveviewer.c:1349 +msgid "" +"If TRUE, the cursor is in a fixed position and the waveform is moving.\n" +"If FALSE, the cursor is moving." +msgstr "" +"Wartość „TRUE” oznacza, że kursor ma stałą pozycję, a przebieg fali się " +"porusza.\n" +"Wartość „FALSE” oznacza, że kursor się porusza." + +#: ../src/pt-waveviewer.c:1363 +msgid "Show ruler" +msgstr "Wyświetlanie linijki" + +#: ../src/pt-waveviewer.c:1364 +msgid "Show the time scale with time marks" +msgstr "Wyświetlanie podziałki czasu ze znacznikami czasu" diff -Nru parlatype-1.5.4/libparlatype/po/pt.po parlatype-1.5.6/libparlatype/po/pt.po --- parlatype-1.5.4/libparlatype/po/pt.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/pt.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" +"POT-Creation-Date: 2018-06-04 15:01+0200\n" "PO-Revision-Date: 2017-01-17 11:57+0000\n" "Last-Translator: Vitor Loureiro \n" "Language-Team: Portuguese \n" @@ -19,13 +19,13 @@ "X-Generator: Launchpad (build 18315)\n" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:436 +#: ../src/pt-player.c:435 #, c-format msgid "URI not valid: %s" msgstr "" #. Translators: %s is a detailed error message. -#: ../src/pt-player.c:448 +#: ../src/pt-player.c:447 #, c-format msgid "File not found: %s" msgstr "Ficheiro não encontrado: %s" @@ -34,8 +34,8 @@ #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 -#: ../src/pt-waveviewer.c:1024 +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" @@ -45,7 +45,7 @@ #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1128 +#: ../src/pt-player.c:1137 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" @@ -55,7 +55,7 @@ #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1135 +#: ../src/pt-player.c:1144 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" @@ -65,7 +65,7 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. -#: ../src/pt-player.c:1152 +#: ../src/pt-player.c:1161 #, c-format msgctxt "short time format" msgid "%02d:%02d" @@ -75,7 +75,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1159 +#: ../src/pt-player.c:1168 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" @@ -85,7 +85,7 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1166 +#: ../src/pt-player.c:1175 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" @@ -95,8 +95,8 @@ #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 -#: ../src/pt-waveviewer.c:1026 +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 #, c-format msgctxt "shortest time format" msgid "%d:%02d" @@ -106,7 +106,7 @@ #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1186 +#: ../src/pt-player.c:1195 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" @@ -116,18 +116,32 @@ #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. -#: ../src/pt-player.c:1193 +#: ../src/pt-player.c:1202 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" -#: ../src/pt-player.c:1495 +#: ../src/pt-player.c:1499 #, c-format msgid "Failed to load a plugin." msgstr "" -#: ../src/pt-progress-dialog.c:148 +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 msgid "Loading file..." msgstr "" @@ -143,29 +157,29 @@ msgid "Failed to start GStreamer pipeline." msgstr "" -#: ../src/pt-waveviewer.c:1381 +#: ../src/pt-waveviewer.c:1331 msgid "Follow cursor" msgstr "" -#: ../src/pt-waveviewer.c:1382 +#: ../src/pt-waveviewer.c:1332 msgid "Scroll automatically to the cursor's position" msgstr "" -#: ../src/pt-waveviewer.c:1398 +#: ../src/pt-waveviewer.c:1348 msgid "Fixed cursor" msgstr "" -#: ../src/pt-waveviewer.c:1399 +#: ../src/pt-waveviewer.c:1349 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" -#: ../src/pt-waveviewer.c:1413 +#: ../src/pt-waveviewer.c:1363 msgid "Show ruler" msgstr "" -#: ../src/pt-waveviewer.c:1414 +#: ../src/pt-waveviewer.c:1364 msgid "Show the time scale with time marks" msgstr "" diff -Nru parlatype-1.5.4/libparlatype/po/sk.po parlatype-1.5.6/libparlatype/po/sk.po --- parlatype-1.5.4/libparlatype/po/sk.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/sk.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,184 @@ +# Slovak translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" +"POT-Creation-Date: 2018-06-04 15:01+0200\n" +"PO-Revision-Date: 2017-11-23 21:21+0000\n" +"Last-Translator: FULL NAME \n" +"Language-Team: Slovak \n" +"Language: sk\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" + +#. Translators: %s is a detailed error message. +#: ../src/pt-player.c:435 +#, c-format +msgid "URI not valid: %s" +msgstr "" + +#. Translators: %s is a detailed error message. +#: ../src/pt-player.c:447 +#, c-format +msgid "File not found: %s" +msgstr "" + +#. Translators: This is a time format, like "2:05:30" for 2 +#. hours, 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 +#, c-format +msgctxt "long time format" +msgid "%d:%02d:%02d" +msgstr "" + +#. Translators: This is a time format, like "2:05:30.1" for 2 +#. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may +#. change ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1137 +#, c-format +msgctxt "long time format, 1 digit" +msgid "%d:%02d:%02d.%d" +msgstr "" + +#. Translators: This is a time format, like "2:05:30.12" for 2 +#. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may +#. change ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1144 +#, c-format +msgctxt "long time format, 2 digits" +msgid "%d:%02d:%02d.%02d" +msgstr "" + +#. Translators: This is a time format, like "05:30" for +#. 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%I02d" instead +#. of "%02d" if your locale uses localized digits. +#: ../src/pt-player.c:1161 +#, c-format +msgctxt "short time format" +msgid "%02d:%02d" +msgstr "" + +#. Translators: This is a time format, like "05:30.1" for +#. 5 minutes, 30 seconds, and 1 tenthsecond. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1168 +#, c-format +msgctxt "short time format, 1 digit" +msgid "%02d:%02d.%d" +msgstr "" + +#. Translators: This is a time format, like "05:30.12" for +#. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1175 +#, c-format +msgctxt "short time format, 2 digits" +msgid "%02d:%02d.%02d" +msgstr "" + +#. Translators: This is a time format, like "5:30" for +#. 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 +#, c-format +msgctxt "shortest time format" +msgid "%d:%02d" +msgstr "" + +#. Translators: This is a time format, like "05:30.1" for +#. 5 minutes, 30 seconds, and 1 tenthsecond. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1195 +#, c-format +msgctxt "shortest time format, 1 digit" +msgid "%d:%02d.%d" +msgstr "" + +#. Translators: This is a time format, like "05:30.12" for +#. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1202 +#, c-format +msgctxt "shortest time format, 2 digits" +msgid "%d:%02d.%02d" +msgstr "" + +#: ../src/pt-player.c:1499 +#, c-format +msgid "Failed to load a plugin." +msgstr "" + +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 +msgid "Loading file..." +msgstr "" + +#: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 +msgid "Failed to open temporary file." +msgstr "" + +#: ../src/pt-waveloader.c:350 +msgid "Failed to setup GStreamer pipeline." +msgstr "" + +#: ../src/pt-waveloader.c:369 +msgid "Failed to start GStreamer pipeline." +msgstr "" + +#: ../src/pt-waveviewer.c:1331 +msgid "Follow cursor" +msgstr "" + +#: ../src/pt-waveviewer.c:1332 +msgid "Scroll automatically to the cursor's position" +msgstr "" + +#: ../src/pt-waveviewer.c:1348 +msgid "Fixed cursor" +msgstr "" + +#: ../src/pt-waveviewer.c:1349 +msgid "" +"If TRUE, the cursor is in a fixed position and the waveform is moving.\n" +"If FALSE, the cursor is moving." +msgstr "" + +#: ../src/pt-waveviewer.c:1363 +msgid "Show ruler" +msgstr "" + +#: ../src/pt-waveviewer.c:1364 +msgid "Show the time scale with time marks" +msgstr "" diff -Nru parlatype-1.5.4/libparlatype/po/sv.po parlatype-1.5.6/libparlatype/po/sv.po --- parlatype-1.5.4/libparlatype/po/sv.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/libparlatype/po/sv.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,184 @@ +# Swedish translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" +"POT-Creation-Date: 2018-06-04 15:01+0200\n" +"PO-Revision-Date: 2017-11-20 20:40+0000\n" +"Last-Translator: Tommy Brunn \n" +"Language-Team: Swedish \n" +"Language: sv\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" + +#. Translators: %s is a detailed error message. +#: ../src/pt-player.c:435 +#, c-format +msgid "URI not valid: %s" +msgstr "Ogiltig URI: %s" + +#. Translators: %s is a detailed error message. +#: ../src/pt-player.c:447 +#, c-format +msgid "File not found: %s" +msgstr "Filen hittades inte: %s" + +#. Translators: This is a time format, like "2:05:30" for 2 +#. hours, 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1130 ../src/pt-waveviewer-ruler.c:174 +#: ../src/pt-waveviewer-ruler.c:228 +#, c-format +msgctxt "long time format" +msgid "%d:%02d:%02d" +msgstr "%d:%02d:%02d" + +#. Translators: This is a time format, like "2:05:30.1" for 2 +#. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may +#. change ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1137 +#, c-format +msgctxt "long time format, 1 digit" +msgid "%d:%02d:%02d.%d" +msgstr "%d:%02d:%02d.%d" + +#. Translators: This is a time format, like "2:05:30.12" for 2 +#. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may +#. change ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1144 +#, c-format +msgctxt "long time format, 2 digits" +msgid "%d:%02d:%02d.%02d" +msgstr "%d:%02d:%02d.%02d" + +#. Translators: This is a time format, like "05:30" for +#. 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%I02d" instead +#. of "%02d" if your locale uses localized digits. +#: ../src/pt-player.c:1161 +#, c-format +msgctxt "short time format" +msgid "%02d:%02d" +msgstr "%02d:%02d" + +#. Translators: This is a time format, like "05:30.1" for +#. 5 minutes, 30 seconds, and 1 tenthsecond. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1168 +#, c-format +msgctxt "short time format, 1 digit" +msgid "%02d:%02d.%d" +msgstr "%02d:%02d.%d" + +#. Translators: This is a time format, like "05:30.12" for +#. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1175 +#, c-format +msgctxt "short time format, 2 digits" +msgid "%02d:%02d.%02d" +msgstr "%02d:%02d.%02d" + +#. Translators: This is a time format, like "5:30" for +#. 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1188 ../src/pt-waveviewer-ruler.c:179 +#: ../src/pt-waveviewer-ruler.c:230 +#, c-format +msgctxt "shortest time format" +msgid "%d:%02d" +msgstr "%d:%02d" + +#. Translators: This is a time format, like "05:30.1" for +#. 5 minutes, 30 seconds, and 1 tenthsecond. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1195 +#, c-format +msgctxt "shortest time format, 1 digit" +msgid "%d:%02d.%d" +msgstr "%d:%02d.%d" + +#. Translators: This is a time format, like "05:30.12" for +#. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change +#. ":" or "." to the separator that your locale uses or +#. use "%Id" instead of "%d" if your locale uses localized digits. +#: ../src/pt-player.c:1202 +#, c-format +msgctxt "shortest time format, 2 digits" +msgid "%d:%02d.%02d" +msgstr "%d:%02d.%02d" + +#: ../src/pt-player.c:1499 +#, c-format +msgid "Failed to load a plugin." +msgstr "Kunde ej ladda plugin." + +#: ../src/pt-progress-dialog.c:102 +#, c-format +msgid "Time remaining: 1 second" +msgid_plural "Time remaining: %d seconds" +msgstr[0] "" +msgstr[1] "" + +#. Translators: this is a time with minutes +#. and seconds, e.g. Time remaining: 3:20 +#: ../src/pt-progress-dialog.c:113 +#, c-format +msgid "Time remaining: %d:%02d" +msgstr "" + +#: ../src/pt-progress-dialog.c:242 +msgid "Loading file..." +msgstr "Laddar fil..." + +#: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 +msgid "Failed to open temporary file." +msgstr "Kunde ej öppna temporär fil" + +#: ../src/pt-waveloader.c:350 +msgid "Failed to setup GStreamer pipeline." +msgstr "" + +#: ../src/pt-waveloader.c:369 +msgid "Failed to start GStreamer pipeline." +msgstr "" + +#: ../src/pt-waveviewer.c:1331 +msgid "Follow cursor" +msgstr "Följ markör" + +#: ../src/pt-waveviewer.c:1332 +msgid "Scroll automatically to the cursor's position" +msgstr "Skrolla automatiskt till pekarens position" + +#: ../src/pt-waveviewer.c:1348 +msgid "Fixed cursor" +msgstr "Fast pekare" + +#: ../src/pt-waveviewer.c:1349 +msgid "" +"If TRUE, the cursor is in a fixed position and the waveform is moving.\n" +"If FALSE, the cursor is moving." +msgstr "" + +#: ../src/pt-waveviewer.c:1363 +msgid "Show ruler" +msgstr "" + +#: ../src/pt-waveviewer.c:1364 +msgid "Show the time scale with time marks" +msgstr "" diff -Nru parlatype-1.5.4/libparlatype/src/Makefile.in parlatype-1.5.6/libparlatype/src/Makefile.in --- parlatype-1.5.4/libparlatype/src/Makefile.in 2017-11-19 15:49:48.000000000 +0000 +++ parlatype-1.5.6/libparlatype/src/Makefile.in 2018-08-17 10:45:35.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -82,8 +92,6 @@ host_triplet = @host@ @HAVE_INTROSPECTION_TRUE@am__append_1 = Parlatype-1.0.gir subdir = src -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp $(parlatype_include_HEADERS) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ @@ -94,6 +102,8 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(parlatype_include_HEADERS) \ + $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -212,6 +222,7 @@ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -238,7 +249,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ @@ -307,6 +317,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -392,6 +403,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -505,7 +517,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign src/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -915,6 +926,8 @@ uninstall-girDATA uninstall-libLTLIBRARIES \ uninstall-parlatype_includeHEADERS uninstall-typelibDATA +.PRECIOUS: Makefile + pt-resources.c: $(resource_xml) $(resource_files) $(AM_V_GEN)glib-compile-resources \ --target=$@ \ diff -Nru parlatype-1.5.4/libparlatype/src/pt-progress-dialog.c parlatype-1.5.6/libparlatype/src/pt-progress-dialog.c --- parlatype-1.5.4/libparlatype/src/pt-progress-dialog.c 2017-10-18 19:41:14.000000000 +0000 +++ parlatype-1.5.6/libparlatype/src/pt-progress-dialog.c 2018-06-17 20:35:03.000000000 +0000 @@ -1,4 +1,4 @@ -/* Copyright (C) Gabor Karsay 2016 +/* Copyright (C) 2016, 2017 Gabor Karsay * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published @@ -16,6 +16,7 @@ #include "config.h" +#include /* ceil */ #include #define GETTEXT_PACKAGE PACKAGE #include @@ -25,6 +26,7 @@ struct _PtProgressDialogPrivate { GtkWidget *progressbar; + GTimer *timer; }; G_DEFINE_TYPE_WITH_PRIVATE (PtProgressDialog, pt_progress_dialog, GTK_TYPE_MESSAGE_DIALOG) @@ -89,6 +91,34 @@ */ +static gchar* +format_time_string (gint seconds) +{ + gchar *result; + + if (seconds <= 60) { + result = g_strdup_printf ( + g_dngettext (GETTEXT_PACKAGE, + "Time remaining: 1 second", + "Time remaining: %d seconds", + seconds), + seconds); + return result; + } + + if (seconds > 60) { + result = g_strdup_printf ( + /* Translators: this is a time with minutes + and seconds, e.g. Time remaining: 3:20 */ + _("Time remaining: %d:%02d"), + seconds / 60, seconds % 60); + return result; + } + + g_assert_not_reached (); +} + + /** * pt_progress_dialog_set_progress: * @dlg: the dialog @@ -103,7 +133,62 @@ g_return_if_fail (PT_IS_PROGRESS_DIALOG (dlg)); g_return_if_fail (progress >= 0 && progress <= 1); - gtk_progress_bar_set_fraction (GTK_PROGRESS_BAR (dlg->priv->progressbar), progress); + gdouble elapsed; /* seconds */ + gint remaining; /* seconds */ + gchar *message; + + elapsed = g_timer_elapsed (dlg->priv->timer, NULL); + remaining = ceil ((elapsed / progress) * (100 - (progress * 100)) / 100); + message = format_time_string (remaining); + + gtk_progress_bar_set_fraction ( + GTK_PROGRESS_BAR (dlg->priv->progressbar), + progress); + gtk_progress_bar_set_text ( + GTK_PROGRESS_BAR (dlg->priv->progressbar), + message); + + g_free (message); +} + +static void +pt_progress_dialog_realize (GtkWidget *widget) +{ + GTK_WIDGET_CLASS (pt_progress_dialog_parent_class)->realize (widget); + + /* Give the dialog a fixed width, so that the size doesn't change + when the count jumps from 10 to 9. Probably it isn't exact + because depending on plural forms of the current locale the widest + string might be another one. */ + + PtProgressDialog *dlg = PT_PROGRESS_DIALOG (widget); + gchar *test_message; + GtkRequisition natural_size; + + test_message = format_time_string (60); + gtk_progress_bar_set_text ( + GTK_PROGRESS_BAR (dlg->priv->progressbar), + test_message); + gtk_widget_get_preferred_size ( + GTK_WIDGET (dlg), + NULL, + &natural_size); + gtk_widget_set_size_request ( + GTK_WIDGET (dlg), + natural_size.width + 10, /* +10px safety padding */ + -1); + g_free (test_message); +} + +static void +pt_progress_dialog_dispose (GObject *object) +{ + PtProgressDialog *dlg = PT_PROGRESS_DIALOG (object); + if (dlg->priv->timer) { + g_timer_destroy (dlg->priv->timer); + dlg->priv->timer = NULL; + } + G_OBJECT_CLASS (pt_progress_dialog_parent_class)->dispose (object); } static void @@ -112,7 +197,12 @@ dlg->priv = pt_progress_dialog_get_instance_private (dlg); GtkWidget *content; + + dlg->priv->timer = g_timer_new (); dlg->priv->progressbar = gtk_progress_bar_new (); + gtk_progress_bar_set_show_text ( + GTK_PROGRESS_BAR (dlg->priv->progressbar), + TRUE); content = gtk_message_dialog_get_message_area (GTK_MESSAGE_DIALOG (dlg)); gtk_container_add (GTK_CONTAINER (content), dlg->priv->progressbar); } @@ -120,7 +210,11 @@ static void pt_progress_dialog_class_init (PtProgressDialogClass *klass) { - /* We don't do anything here */ + GObjectClass *gobject_class = G_OBJECT_CLASS (klass); + GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); + + gobject_class->dispose = pt_progress_dialog_dispose; + widget_class->realize = pt_progress_dialog_realize; } /** diff -Nru parlatype-1.5.4/libparlatype/src/pt-resources.c parlatype-1.5.6/libparlatype/src/pt-resources.c --- parlatype-1.5.4/libparlatype/src/pt-resources.c 2017-11-18 21:22:16.000000000 +0000 +++ parlatype-1.5.6/libparlatype/src/pt-resources.c 2018-07-28 16:07:19.000000000 +0000 @@ -109,6 +109,8 @@ */ +#ifndef __GTK_DOC_IGNORE__ + #if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7) #define G_HAS_CONSTRUCTORS 1 @@ -121,17 +123,43 @@ #define G_HAS_CONSTRUCTORS 1 -#define G_DEFINE_CONSTRUCTOR(_func) \ +/* We do some weird things to avoid the constructors being optimized + * away on VS2015 if WholeProgramOptimization is enabled. First we + * make a reference to the array from the wrapper to make sure its + * references. Then we use a pragma to make sure the wrapper function + * symbol is always included at the link stage. Also, the symbols + * need to be extern (but not dllexport), even though they are not + * really used from another object file. + */ + +/* We need to account for differences between the mangling of symbols + * for Win32 (x86) and x64 programs, as symbols on Win32 are prefixed + * with an underscore but symbols on x64 are not. + */ +#ifdef _WIN64 +#define G_MSVC_SYMBOL_PREFIX "" +#else +#define G_MSVC_SYMBOL_PREFIX "_" +#endif + +#define G_DEFINE_CONSTRUCTOR(_func) G_MSVC_CTOR (_func, G_MSVC_SYMBOL_PREFIX) +#define G_DEFINE_DESTRUCTOR(_func) G_MSVC_DTOR (_func, G_MSVC_SYMBOL_PREFIX) + +#define G_MSVC_CTOR(_func,_sym_prefix) \ static void _func(void); \ - static int _func ## _wrapper(void) { _func(); return 0; } \ + extern int (* _array ## _func)(void); \ + int _func ## _wrapper(void) { _func(); g_slist_find (NULL, _array ## _func); return 0; } \ + __pragma(comment(linker,"/include:" _sym_prefix # _func "_wrapper")) \ __pragma(section(".CRT$XCU",read)) \ - __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _wrapper; + __declspec(allocate(".CRT$XCU")) int (* _array ## _func)(void) = _func ## _wrapper; -#define G_DEFINE_DESTRUCTOR(_func) \ +#define G_MSVC_DTOR(_func,_sym_prefix) \ static void _func(void); \ - static int _func ## _constructor(void) { atexit (_func); return 0; } \ + extern int (* _array ## _func)(void); \ + int _func ## _constructor(void) { atexit (_func); g_slist_find (NULL, _array ## _func); return 0; } \ + __pragma(comment(linker,"/include:" _sym_prefix # _func "_constructor")) \ __pragma(section(".CRT$XCU",read)) \ - __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _constructor; + __declspec(allocate(".CRT$XCU")) int (* _array ## _func)(void) = _func ## _constructor; #elif defined (_MSC_VER) @@ -182,6 +210,7 @@ #endif +#endif /* __GTK_DOC_IGNORE__ */ #ifdef G_HAS_CONSTRUCTORS diff -Nru parlatype-1.5.4/libparlatype/src/pt-waveviewer.c parlatype-1.5.6/libparlatype/src/pt-waveviewer.c --- parlatype-1.5.4/libparlatype/src/pt-waveviewer.c 2017-11-12 22:13:53.000000000 +0000 +++ parlatype-1.5.6/libparlatype/src/pt-waveviewer.c 2018-07-28 17:06:07.000000000 +0000 @@ -53,6 +53,10 @@ gboolean fixed_cursor; gboolean show_ruler; gboolean has_selection; + gboolean zoom; + + gint64 zoom_time; + gint zoom_pos; /* Selections, in milliseconds */ gint64 sel_start; @@ -84,6 +88,7 @@ PROP_HAS_SELECTION, PROP_SELECTION_START, PROP_SELECTION_END, + PROP_ZOOM, N_PROPERTIES }; @@ -91,6 +96,8 @@ CURSOR_CHANGED, SELECTION_CHANGED, PLAY_TOGGLED, + ZOOM_IN, + ZOOM_OUT, LAST_SIGNAL }; @@ -296,10 +303,6 @@ GdkEventKey *event) { PtWaveviewer *self = PT_WAVEVIEWER (widget); - gdouble step; - gdouble page; - gdouble value; - gdouble upper; if (event->type != GDK_KEY_PRESS) return FALSE; @@ -373,45 +376,33 @@ } } else { - /* no modifier pressed */ + /* No modifier pressed: Scroll window, depending on text direction */ if (!(event->state & ALL_ACCELS_MASK)) { - step = gtk_adjustment_get_step_increment (self->priv->adj); - page = gtk_adjustment_get_page_increment (self->priv->adj); - value = gtk_adjustment_get_value (self->priv->adj); - upper = gtk_adjustment_get_upper (self->priv->adj); - - /* We scroll ourselves because we want to do it without modifier, - however it's not as smooth as the "real" scrolling */ + GtkScrollType scroll = GTK_SCROLL_NONE; switch (event->keyval) { case GDK_KEY_Left: - gtk_adjustment_set_value (self->priv->adj, value - step); - pt_waveviewer_set_follow_cursor (self, FALSE); - return TRUE; + scroll = GTK_SCROLL_STEP_BACKWARD; + break; case GDK_KEY_Right: - gtk_adjustment_set_value (self->priv->adj, value + step); - pt_waveviewer_set_follow_cursor (self, FALSE); - return TRUE; + scroll = GTK_SCROLL_STEP_FORWARD; + break; case GDK_KEY_Page_Up: - gtk_adjustment_set_value (self->priv->adj, value - page); - pt_waveviewer_set_follow_cursor (self, FALSE); - return TRUE; + scroll = self->priv->rtl ? GTK_SCROLL_PAGE_FORWARD : GTK_SCROLL_PAGE_BACKWARD; + break; case GDK_KEY_Page_Down: - gtk_adjustment_set_value (self->priv->adj, value + page); - pt_waveviewer_set_follow_cursor (self, FALSE); - return TRUE; + scroll = self->priv->rtl ? GTK_SCROLL_PAGE_BACKWARD : GTK_SCROLL_PAGE_FORWARD; + break; case GDK_KEY_Home: - if (self->priv->rtl) - gtk_adjustment_set_value (self->priv->adj, upper); - else - gtk_adjustment_set_value (self->priv->adj, 0); - pt_waveviewer_set_follow_cursor (self, FALSE); - return TRUE; + scroll = self->priv->rtl ? GTK_SCROLL_END : GTK_SCROLL_START; + break; case GDK_KEY_End: - if (self->priv->rtl) - gtk_adjustment_set_value (self->priv->adj, 0); - else - gtk_adjustment_set_value (self->priv->adj, upper); + scroll = self->priv->rtl ? GTK_SCROLL_START : GTK_SCROLL_END; + break; + } + if (scroll != GTK_SCROLL_NONE) { + gboolean ret; + g_signal_emit_by_name (self, "scroll-child", scroll, TRUE, &ret); pt_waveviewer_set_follow_cursor (self, FALSE); return TRUE; } @@ -505,6 +496,36 @@ } static gboolean +pt_waveviewer_scroll_event (GtkWidget *widget, + GdkEventScroll *event) +{ + PtWaveviewer *self = PT_WAVEVIEWER (widget); + + /* No modifier pressed: scrolling back and forth */ + if (!(event->state & ALL_ACCELS_MASK)) { + gtk_propagate_event + (gtk_scrolled_window_get_hscrollbar (GTK_SCROLLED_WINDOW (widget)), + (GdkEvent*)event); + return TRUE; + } + + /* Only Control pressed: zoom in or out */ + if ((event->state & ALL_ACCELS_MASK) == GDK_CONTROL_MASK) { + if (event->delta_y < 0 || event->delta_x < 0) { + g_signal_emit_by_name (self, "zoom-out"); + return TRUE; + } + if (event->delta_y > 0 || event->delta_x > 0) { + g_signal_emit_by_name (self, "zoom-in"); + return TRUE; + } + + } + + return FALSE; +} + +static gboolean pt_waveviewer_motion_notify_event (GtkWidget *widget, GdkEventMotion *event) { @@ -559,7 +580,7 @@ static void update_cached_style_values (PtWaveviewer *self) { - /* Colors and direction are cached */ + /* Only direction is cached */ GtkStyleContext *context; GtkStateFlags state; @@ -595,22 +616,67 @@ } static void +pt_waveviewer_direction_changed (GtkWidget *widget, + GtkTextDirection direction) +{ + PtWaveviewer *self = PT_WAVEVIEWER (widget); + gint widget_width, first_visible, page_width; + + /* This is called after state-flags-changed signal. + The waveform handles repainting itself, here we have to flip + the GtkAdjustment and recalculate the cursor's position */ + widget_width = gtk_widget_get_allocated_width (self->priv->waveform); + first_visible = (gint) gtk_adjustment_get_value (self->priv->adj); + page_width = (gint) gtk_adjustment_get_page_size (self->priv->adj); + gtk_adjustment_set_value ( + self->priv->adj, + widget_width - first_visible - page_width); + + if (self->priv->peaks) + pt_waveviewer_cursor_render ( + PT_WAVEVIEWER_CURSOR (self->priv->cursor), + time_to_pixel (self, self->priv->playback_cursor)); + + GTK_WIDGET_CLASS (pt_waveviewer_parent_class)->direction_changed (widget, direction); +} + +static void pt_waveviewer_realize (GtkWidget *widget) { GTK_WIDGET_CLASS (pt_waveviewer_parent_class)->realize (widget); update_cached_style_values (PT_WAVEVIEWER (widget)); } +static void +stop_following_cursor (PtWaveviewer *self) +{ + if (self->priv->peaks) + pt_waveviewer_set_follow_cursor (self, FALSE); +} + static gboolean -scrollbar_cb (GtkWidget *widget, - GdkEventButton *event, - gpointer data) +scrollbar_button_press_event_cb (GtkWidget *widget, + GdkEventButton *event, + gpointer data) { /* If user clicks on scrollbar don't follow cursor anymore. Otherwise it would scroll immediately back again. */ - PtWaveviewer *self = PT_WAVEVIEWER (data); - pt_waveviewer_set_follow_cursor (self, FALSE); + stop_following_cursor (PT_WAVEVIEWER (data)); + + /* Propagate signal */ + return FALSE; +} + +static gboolean +scrollbar_scroll_event_cb (GtkWidget *widget, + GdkEventButton *event, + gpointer data) +{ + /* If user scrolls on scrollbar don't follow cursor anymore. + Otherwise it would scroll immediately back again. */ + + stop_following_cursor (PT_WAVEVIEWER (data)); /* Propagate signal */ return FALSE; @@ -744,24 +810,67 @@ } } +static gboolean +cursor_is_visible (PtWaveviewer *self) +{ + gint cursor_pos, left, right; + + cursor_pos = time_to_pixel (self, self->priv->playback_cursor); + left = (gint) gtk_adjustment_get_value (self->priv->adj); + right = left + (gint) gtk_adjustment_get_page_size (self->priv->adj); + + return (left <= cursor_pos && cursor_pos <= right); +} + +static void +size_allocate_cb (GtkWidget *widget, + GdkRectangle *allocation, + gpointer user_data) +{ + PtWaveviewer *self = PT_WAVEVIEWER (user_data); + + if (self->priv->zoom) { + gtk_adjustment_set_value ( + self->priv->adj, + time_to_pixel (self, self->priv->zoom_time) - self->priv->zoom_pos); + self->priv->zoom = FALSE; + } + + if (self->priv->peaks) { + pt_waveviewer_cursor_render ( + PT_WAVEVIEWER_CURSOR (self->priv->cursor), + time_to_pixel (self, self->priv->playback_cursor)); + } + + pt_waveviewer_selection_set ( + PT_WAVEVIEWER_SELECTION (self->priv->selection), + time_to_pixel (self, self->priv->sel_start), + time_to_pixel (self, self->priv->sel_end)); +} + static void make_widget_ready (PtWaveviewer *self, gboolean ready) { - gint widget_width; + gint widget_width, left; - if (!ready) { - if (self->priv->peaks) { - g_free (self->priv->peaks); - self->priv->peaks = NULL; + if (!ready && self->priv->zoom) { + /* If this is a zoom, we still have the old waveform. + Get an anchor point = zoom_pos, either cursor position or + middle of view. The anchor point is relative to the view. + Get time of that anchor point = zoom_time. */ + + left = (gint) gtk_adjustment_get_value (self->priv->adj); + if (cursor_is_visible (self)) { + self->priv->zoom_time = self->priv->playback_cursor; + self->priv->zoom_pos = time_to_pixel (self, self->priv->playback_cursor) - left; + } else { + self->priv->zoom_pos = (gint) gtk_adjustment_get_page_size (self->priv->adj) / 2; + self->priv->zoom_time = pixel_to_time (self, self->priv->zoom_pos + left); } - self->priv->peaks_size = 0; - self->priv->px_per_sec = 0; - self->priv->duration = 0; - widget_width = -1; - pt_waveviewer_cursor_render ( - PT_WAVEVIEWER_CURSOR (self->priv->cursor), -1); + } + if (!ready && !self->priv->zoom) { /* Reset previous selections */ self->priv->sel_start = self->priv->sel_end = 0; self->priv->has_selection = FALSE; @@ -774,30 +883,48 @@ g_object_notify_by_pspec ( G_OBJECT (self), obj_properties[PROP_HAS_SELECTION]); + } + + if (!ready) { + if (self->priv->peaks) { + g_free (self->priv->peaks); + self->priv->peaks = NULL; + } + self->priv->peaks_size = 0; + self->priv->px_per_sec = 0; + self->priv->duration = 0; pt_waveviewer_selection_set ( PT_WAVEVIEWER_SELECTION (self->priv->selection), 0, 0); + pt_waveviewer_cursor_render ( + PT_WAVEVIEWER_CURSOR (self->priv->cursor), + -1); } else { self->priv->duration = calculate_duration (self); widget_width = self->priv->peaks_size / 2; gtk_adjustment_set_upper (self->priv->adj, widget_width); + gtk_widget_set_size_request ( + self->priv->waveform, + widget_width, + WAVE_MIN_HEIGHT); } + pt_waveviewer_waveform_set ( + PT_WAVEVIEWER_WAVEFORM (self->priv->waveform), + self->priv->peaks, + self->priv->peaks_size); + pt_waveviewer_ruler_set_ruler ( PT_WAVEVIEWER_RULER (self->priv->ruler), self->priv->peaks_size / 2, self->priv->px_per_sec, self->priv->duration); - gtk_widget_set_size_request ( - self->priv->waveform, - widget_width, - WAVE_MIN_HEIGHT); - - pt_waveviewer_waveform_set ( - PT_WAVEVIEWER_WAVEFORM (self->priv->waveform), - self->priv->peaks, - self->priv->peaks_size); + /* Here we would render the cursor and change the GtkAdjustment so that + we show the intended part of the waveform after zooming. + However, there were some issues because the waveform didn't + allocate the new size in time. This is now done in the callback + above, size_allocate_cb(). */ } static gboolean @@ -926,6 +1053,9 @@ gtk_revealer_set_reveal_child (GTK_REVEALER (self->priv->revealer), self->priv->show_ruler); break; + case PROP_ZOOM: + self->priv->zoom = g_value_get_boolean (value); + break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); break; @@ -941,7 +1071,11 @@ self->priv->adj = gtk_scrolled_window_get_hadjustment (GTK_SCROLLED_WINDOW (self)); g_signal_connect (gtk_scrolled_window_get_hscrollbar (GTK_SCROLLED_WINDOW (self)), "button_press_event", - G_CALLBACK (scrollbar_cb), + G_CALLBACK (scrollbar_button_press_event_cb), + self); + g_signal_connect (gtk_scrolled_window_get_hscrollbar (GTK_SCROLLED_WINDOW (self)), + "scroll_event", + G_CALLBACK (scrollbar_scroll_event_cb), self); } @@ -977,6 +1111,8 @@ self->priv->focus_on_cursor = FALSE; self->priv->sel_start = 0; self->priv->sel_end = 0; + self->priv->zoom_time = 0; + self->priv->zoom_pos = 0; self->priv->arrows = get_resize_cursor (); self->priv->waveform = pt_waveviewer_waveform_new (); self->priv->focus = pt_waveviewer_focus_new (); @@ -995,12 +1131,8 @@ gtk_overlay_add_overlay (GTK_OVERLAY (overlay), self->priv->selection); gtk_overlay_add_overlay (GTK_OVERLAY (overlay), self->priv->cursor); gtk_overlay_add_overlay (GTK_OVERLAY (overlay), self->priv->focus); - gtk_container_add_with_properties ( - GTK_CONTAINER (box), - overlay, - "expand", TRUE, - "fill", TRUE, - NULL); + gtk_container_add (GTK_CONTAINER (box), overlay); + gtk_widget_set_vexpand (overlay, TRUE); gtk_container_add (GTK_CONTAINER (self->priv->revealer), self->priv->ruler); gtk_container_add (GTK_CONTAINER (box), self->priv->revealer); gtk_container_add (GTK_CONTAINER (self), box); @@ -1027,6 +1159,12 @@ g_object_unref (css_file); g_object_unref (provider); + g_signal_connect ( + GTK_WIDGET (self->priv->waveform), + "size-allocate", + G_CALLBACK (size_allocate_cb), + self); + /* If overriding these vfuncs something's going wrong, note that focus-in an focus-out need GdkEventFocus as 2nd parameter in vfunc */ g_signal_connect (self, "focus", G_CALLBACK (pt_waveviewer_focus), NULL); @@ -1047,9 +1185,11 @@ widget_class->button_press_event = pt_waveviewer_button_press_event; widget_class->button_release_event = pt_waveviewer_button_release_event; + widget_class->direction_changed = pt_waveviewer_direction_changed; widget_class->key_press_event = pt_waveviewer_key_press_event; widget_class->motion_notify_event = pt_waveviewer_motion_notify_event; widget_class->realize = pt_waveviewer_realize; + widget_class->scroll_event = pt_waveviewer_scroll_event; widget_class->state_flags_changed = pt_waveviewer_state_flags_changed; widget_class->style_updated = pt_waveviewer_style_updated; @@ -1108,6 +1248,40 @@ 0); /** + * PtWaveviewer::zoom-in: + * @viewer: the waveviewer emitting the signal + * + * Signals that the user requested to zoom into the waveform. + */ + signals[ZOOM_IN] = + g_signal_new ("zoom-in", + PT_TYPE_WAVEVIEWER, + G_SIGNAL_RUN_FIRST, + 0, + NULL, + NULL, + g_cclosure_marshal_VOID__VOID, + G_TYPE_NONE, + 0); + + /** + * PtWaveviewer::zoom-out: + * @viewer: the waveviewer emitting the signal + * + * Signals that the user requested to zoom out of the waveform. + */ + signals[ZOOM_OUT] = + g_signal_new ("zoom-out", + PT_TYPE_WAVEVIEWER, + G_SIGNAL_RUN_FIRST, + 0, + NULL, + NULL, + g_cclosure_marshal_VOID__VOID, + G_TYPE_NONE, + 0); + + /** * PtWaveviewer:playback-cursor: * * Current playback position in milliseconds. @@ -1219,6 +1393,24 @@ 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS); + /** + * PtWaveviewer:zoom: + * + * Set this to TRUE to indicate that the next wave data will be the same + * waveform but at a different zoom level. PtWaveviewer needs this to + * decide which part of the waveform should be shown. + * – Note: This will be probably removed with the next API break in + * version 1.6 and integrated into pt_waveviewer_set_wave(). + */ + + obj_properties[PROP_ZOOM] = + g_param_spec_boolean ( + "zoom", + "Zoom", + "Indicates that next wave data will zoom", + FALSE, + G_PARAM_WRITABLE | G_PARAM_CONSTRUCT | G_PARAM_STATIC_STRINGS); + g_object_class_install_properties ( gobject_class, N_PROPERTIES, diff -Nru parlatype-1.5.4/libparlatype/src/pt-waveviewer-selection.c parlatype-1.5.6/libparlatype/src/pt-waveviewer-selection.c --- parlatype-1.5.4/libparlatype/src/pt-waveviewer-selection.c 2017-11-07 22:06:42.000000000 +0000 +++ parlatype-1.5.6/libparlatype/src/pt-waveviewer-selection.c 2018-06-17 20:35:03.000000000 +0000 @@ -121,6 +121,13 @@ { gint x1, x2, height; + /* Make sure start < end, important for rtl layouts */ + if (start > end) { + x1 = start; + start = end; + end = x1; + } + /* Case: no change */ if (self->priv->start == start && self->priv->end == end) return; diff -Nru parlatype-1.5.4/libparlatype/test-driver parlatype-1.5.6/libparlatype/test-driver --- parlatype-1.5.4/libparlatype/test-driver 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/libparlatype/test-driver 2018-04-09 18:22:53.000000000 +0000 @@ -3,7 +3,7 @@ scriptversion=2013-07-13.22; # UTC -# Copyright (C) 2011-2013 Free Software Foundation, Inc. +# Copyright (C) 2011-2014 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -106,11 +106,14 @@ # Test script is run here. "$@" >$log_file 2>&1 estatus=$? + if test $enable_hard_errors = no && test $estatus -eq 99; then - estatus=1 + tweaked_estatus=1 +else + tweaked_estatus=$estatus fi -case $estatus:$expect_failure in +case $tweaked_estatus:$expect_failure in 0:yes) col=$red res=XPASS recheck=yes gcopy=yes;; 0:*) col=$grn res=PASS recheck=no gcopy=no;; 77:*) col=$blu res=SKIP recheck=no gcopy=yes;; @@ -119,6 +122,12 @@ *:*) col=$red res=FAIL recheck=yes gcopy=yes;; esac +# Report the test outcome and exit status in the logs, so that one can +# know whether the test passed or failed simply by looking at the '.log' +# file, without the need of also peaking into the corresponding '.trs' +# file (automake bug#11814). +echo "$res $test_name (exit status: $estatus)" >>$log_file + # Report outcome to console. echo "${col}${res}${std}: $test_name" diff -Nru parlatype-1.5.4/libparlatype/tests/Makefile.am parlatype-1.5.6/libparlatype/tests/Makefile.am --- parlatype-1.5.4/libparlatype/tests/Makefile.am 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/tests/Makefile.am 2018-06-17 20:35:03.000000000 +0000 @@ -17,7 +17,7 @@ AM_LDFLAGS = -export-dynamic AM_CPPFLAGS = \ -DG_LOG_DOMAIN=\"libparlatype-unittest\" \ - -I$(top_srcdir) \ + -I$(top_srcdir)/src \ -I$(top_builddir) test_programs = \ diff -Nru parlatype-1.5.4/libparlatype/tests/Makefile.in parlatype-1.5.6/libparlatype/tests/Makefile.in --- parlatype-1.5.4/libparlatype/tests/Makefile.in 2017-11-19 15:49:48.000000000 +0000 +++ parlatype-1.5.6/libparlatype/tests/Makefile.in 2018-08-17 10:45:35.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -20,7 +20,17 @@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -83,9 +93,6 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ -DIST_COMMON = $(top_srcdir)/glib-tap.mk $(srcdir)/Makefile.in \ - $(srcdir)/Makefile.am $(top_srcdir)/depcomp \ - $(top_srcdir)/test-driver README TESTS = $(am__EXEEXT_1) installed_test_PROGRAMS = $(am__EXEEXT_4) noinst_PROGRAMS = $(am__EXEEXT_5) @@ -126,6 +133,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -445,6 +453,8 @@ TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ $(TEST_LOG_FLAGS) +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp \ + $(top_srcdir)/glib-tap.mk $(top_srcdir)/test-driver README DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -471,7 +481,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ @@ -540,6 +549,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -625,6 +635,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -694,7 +705,7 @@ AM_LDFLAGS = -export-dynamic AM_CPPFLAGS = \ -DG_LOG_DOMAIN=\"libparlatype-unittest\" \ - -I$(top_srcdir) \ + -I$(top_srcdir)/src \ -I$(top_builddir) test_programs = \ @@ -724,7 +735,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign tests/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -733,7 +743,7 @@ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; -$(top_srcdir)/glib-tap.mk: +$(top_srcdir)/glib-tap.mk $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh @@ -1094,7 +1104,7 @@ if test -n "$$am__remaking_logs"; then \ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ "recursion detected" >&2; \ - else \ + elif test -n "$$redo_logs"; then \ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ fi; \ if $(am__make_dryrun); then :; else \ @@ -1465,6 +1475,8 @@ uninstall-installed_test_metaDATA \ uninstall-nobase_installed_testDATA +.PRECIOUS: Makefile + @ENABLE_INSTALLED_TESTS_TRUE@%.test: %$(EXEEXT) Makefile @ENABLE_INSTALLED_TESTS_TRUE@ $(AM_V_GEN) (echo '[Test]' > $@.tmp; \ diff -Nru parlatype-1.5.4/libparlatype/tests/player.c parlatype-1.5.6/libparlatype/tests/player.c --- parlatype-1.5.4/libparlatype/tests/player.c 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/tests/player.c 2018-06-17 20:35:03.000000000 +0000 @@ -17,7 +17,7 @@ #include #include /* error domain */ -#include +#include typedef struct { diff -Nru parlatype-1.5.4/libparlatype/tests/progressdialog.c parlatype-1.5.6/libparlatype/tests/progressdialog.c --- parlatype-1.5.4/libparlatype/tests/progressdialog.c 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/tests/progressdialog.c 2018-06-17 20:35:03.000000000 +0000 @@ -16,7 +16,7 @@ #include -#include +#include static void diff -Nru parlatype-1.5.4/libparlatype/tests/wavedata.c parlatype-1.5.6/libparlatype/tests/wavedata.c --- parlatype-1.5.4/libparlatype/tests/wavedata.c 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/tests/wavedata.c 2018-06-17 20:35:03.000000000 +0000 @@ -16,7 +16,7 @@ #include -#include +#include static void diff -Nru parlatype-1.5.4/libparlatype/tests/waveloader.c parlatype-1.5.6/libparlatype/tests/waveloader.c --- parlatype-1.5.4/libparlatype/tests/waveloader.c 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/tests/waveloader.c 2018-06-17 20:35:03.000000000 +0000 @@ -16,7 +16,7 @@ #include -#include +#include static void diff -Nru parlatype-1.5.4/libparlatype/tests/waveviewer.c parlatype-1.5.6/libparlatype/tests/waveviewer.c --- parlatype-1.5.4/libparlatype/tests/waveviewer.c 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/libparlatype/tests/waveviewer.c 2018-06-17 20:35:03.000000000 +0000 @@ -16,8 +16,8 @@ #include -#include -#include +#include +#include static void diff -Nru parlatype-1.5.4/libreoffice/Makefile.in parlatype-1.5.6/libreoffice/Makefile.in --- parlatype-1.5.4/libreoffice/Makefile.in 2017-11-19 15:49:26.000000000 +0000 +++ parlatype-1.5.6/libreoffice/Makefile.in 2018-08-17 10:45:10.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -15,7 +15,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -79,8 +89,6 @@ build_triplet = @build@ host_triplet = @host@ subdir = libreoffice -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(am__dist_lo_DATA_DIST) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ @@ -89,6 +97,8 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__dist_lo_DATA_DIST) \ + $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -143,6 +153,7 @@ am__installdirs = "$(DESTDIR)$(lodir)" DATA = $(dist_lo_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -164,7 +175,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ @@ -215,6 +225,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -297,6 +308,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -323,7 +335,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libreoffice/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign libreoffice/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -523,6 +534,8 @@ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ uninstall-am uninstall-dist_loDATA +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru parlatype-1.5.4/libreoffice/Parlatype.py parlatype-1.5.6/libreoffice/Parlatype.py --- parlatype-1.5.4/libreoffice/Parlatype.py 2017-11-19 09:34:23.000000000 +0000 +++ parlatype-1.5.6/libreoffice/Parlatype.py 2018-08-17 10:32:39.000000000 +0000 @@ -1,7 +1,7 @@ # -*- coding: utf-8 -*- ''' Parlatype.py is part of Parlatype. -Version: 1.5.4 +Version: 1.5.6 Copyright (C) Gabor Karsay 2016 diff -Nru parlatype-1.5.4/ltmain.sh parlatype-1.5.6/ltmain.sh --- parlatype-1.5.4/ltmain.sh 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/ltmain.sh 2018-04-09 18:22:53.000000000 +0000 @@ -1,9 +1,12 @@ +#! /bin/sh +## DO NOT EDIT - This file generated from ./build-aux/ltmain.in +## by inline-source v2014-01-03.01 -# libtool (GNU libtool) 2.4.2 +# libtool (GNU libtool) 2.4.6 +# Provide generalized library-building support services. # Written by Gordon Matzigkeit , 1996 -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# Copyright (C) 1996-2015 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -23,881 +26,2112 @@ # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, -# or obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with this program. If not, see . -# Usage: $progname [OPTION]... [MODE-ARG]... -# -# Provide generalized library-building support services. -# -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --no-quiet, --no-silent -# print informational messages (default) -# --no-warn don't display warning messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print more informational messages than default -# --no-verbose don't print the extra informational messages -# --version print version information -# -h, --help, --help-all print short, long, or detailed help message -# -# MODE must be one of the following: -# -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory -# -# MODE-ARGS vary depending on the MODE. When passed as first option, -# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. -# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -# -# When reporting a bug, please describe a test case to reproduce it and -# include the following information: -# -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1.11 -# automake: $automake_version -# autoconf: $autoconf_version -# -# Report bugs to . -# GNU libtool home page: . -# General help using GNU software: . PROGRAM=libtool PACKAGE=libtool -VERSION="2.4.2 Debian-2.4.2-1.11" -TIMESTAMP="" -package_revision=1.3337 +VERSION="2.4.6 Debian-2.4.6-2" +package_revision=2.4.6 -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + +## ------ ## +## Usage. ## +## ------ ## + +# Run './libtool --help' for help with using this script from the +# command line. + + +## ------------------------------- ## +## User overridable command paths. ## +## ------------------------------- ## + +# After configure completes, it has a better idea of some of the +# shell tools we need than the defaults used by the functions shared +# with bootstrap, so set those here where they can still be over- +# ridden by the user, but otherwise take precedence. + +: ${AUTOCONF="autoconf"} +: ${AUTOMAKE="automake"} + + +## -------------------------- ## +## Source external libraries. ## +## -------------------------- ## + +# Much of our low-level functionality needs to be sourced from external +# libraries, which are installed to $pkgauxdir. + +# Set a version string for this script. +scriptversion=2015-01-20.17; # UTC + +# General shell script boiler plate, and helper functions. +# Written by Gary V. Vaughan, 2004 + +# Copyright (C) 2004-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. + +# As a special exception to the GNU General Public License, if you distribute +# this file as part of a program or library that is built using GNU Libtool, +# you may include this file under the same distribution terms that you use +# for the rest of that program. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Please report bugs or propose patches to gary@gnu.org. + + +## ------ ## +## Usage. ## +## ------ ## + +# Evaluate this file near the top of your script to gain access to +# the functions and variables defined here: +# +# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh +# +# If you need to override any of the default environment variable +# settings, do that before evaluating this file. + + +## -------------------- ## +## Shell normalisation. ## +## -------------------- ## + +# Some shells need a little help to be as Bourne compatible as possible. +# Before doing anything else, make sure all that help has been provided! + +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} -# NLS nuisances: We save the old values to restore during execute mode. -lt_user_locale= -lt_safe_locale= -for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +# NLS nuisances: We save the old values in case they are required later. +_G_user_locale= +_G_safe_locale= +for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do - eval "if test \"\${$lt_var+set}\" = set; then - save_$lt_var=\$$lt_var - $lt_var=C - export $lt_var - lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" - lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + eval "if test set = \"\${$_G_var+set}\"; then + save_$_G_var=\$$_G_var + $_G_var=C + export $_G_var + _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" + _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" fi" done -LC_ALL=C -LANGUAGE=C -export LANGUAGE LC_ALL -$lt_unset CDPATH +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Make sure IFS has a sensible default +sp=' ' +nl=' +' +IFS="$sp $nl" +# There are apparently some retarded systems that use ';' as a PATH separator! +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" +## ------------------------- ## +## Locate command utilities. ## +## ------------------------- ## + + +# func_executable_p FILE +# ---------------------- +# Check that FILE is an executable regular file. +func_executable_p () +{ + test -f "$1" && test -x "$1" +} + + +# func_path_progs PROGS_LIST CHECK_FUNC [PATH] +# -------------------------------------------- +# Search for either a program that responds to --version with output +# containing "GNU", or else returned by CHECK_FUNC otherwise, by +# trying all the directories in PATH with each of the elements of +# PROGS_LIST. +# +# CHECK_FUNC should accept the path to a candidate program, and +# set $func_check_prog_result if it truncates its output less than +# $_G_path_prog_max characters. +func_path_progs () +{ + _G_progs_list=$1 + _G_check_func=$2 + _G_PATH=${3-"$PATH"} + + _G_path_prog_max=0 + _G_path_prog_found=false + _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} + for _G_dir in $_G_PATH; do + IFS=$_G_save_IFS + test -z "$_G_dir" && _G_dir=. + for _G_prog_name in $_G_progs_list; do + for _exeext in '' .EXE; do + _G_path_prog=$_G_dir/$_G_prog_name$_exeext + func_executable_p "$_G_path_prog" || continue + case `"$_G_path_prog" --version 2>&1` in + *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; + *) $_G_check_func $_G_path_prog + func_path_progs_result=$func_check_prog_result + ;; + esac + $_G_path_prog_found && break 3 + done + done + done + IFS=$_G_save_IFS + test -z "$func_path_progs_result" && { + echo "no acceptable sed could be found in \$PATH" >&2 + exit 1 + } +} + + +# We want to be able to use the functions in this file before configure +# has figured out where the best binaries are kept, which means we have +# to search for them ourselves - except when the results are already set +# where we skip the searches. + +# Unless the user overrides by setting SED, search the path for either GNU +# sed, or the sed that truncates its output the least. +test -z "$SED" && { + _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for _G_i in 1 2 3 4 5 6 7; do + _G_sed_script=$_G_sed_script$nl$_G_sed_script + done + echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed + _G_sed_script= + + func_check_prog_sed () + { + _G_path_prog=$1 + + _G_count=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo '' >> conftest.nl + "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin + rm -f conftest.sed + SED=$func_path_progs_result +} + + +# Unless the user overrides by setting GREP, search the path for either GNU +# grep, or the grep that truncates its output the least. +test -z "$GREP" && { + func_check_prog_grep () + { + _G_path_prog=$1 + + _G_count=0 + _G_path_prog_max=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo 'GREP' >> conftest.nl + "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin + GREP=$func_path_progs_result +} + + +## ------------------------------- ## +## User overridable command paths. ## +## ------------------------------- ## + +# All uppercase variable names are used for environment variables. These +# variables can be overridden by the user before calling a script that +# uses them if a suitable command of that name is not already available +# in the command search PATH. : ${CP="cp -f"} -test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${ECHO="printf %s\n"} +: ${EGREP="$GREP -E"} +: ${FGREP="$GREP -F"} +: ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} -: ${Xsed="$SED -e 1s/^X//"} - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -exit_status=$EXIT_SUCCESS - -# Make sure IFS has a sensible default -lt_nl=' -' -IFS=" $lt_nl" -dirname="s,/[^/]*$,," -basename="s,^.*/,," -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} # func_dirname may be replaced by extended shell implementation +## -------------------- ## +## Useful sed snippets. ## +## -------------------- ## +sed_dirname='s|/[^/]*$||' +sed_basename='s|^.*/||' -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "${1}" | $SED "$basename"` -} # func_basename may be replaced by extended shell implementation +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s|\([`"$\\]\)|\\\1|g' +# Same as above, but do not quote variable references. +sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` -} # func_dirname_and_basename may be replaced by extended shell implementation +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' +# Sed substitution that converts a w32 file name or path +# that contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname may be replaced by extended shell implementation +# Re-'\' parameter expansions in output of sed_double_quote_subst that +# were '\'-ed in input to the same. If an odd number of '\' preceded a +# '$' in input to sed_double_quote_subst, that '$' was protected from +# expansion. Since each input '\' is now two '\'s, look for any number +# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. +_G_bs='\\' +_G_bs2='\\\\' +_G_bs4='\\\\\\\\' +_G_dollar='\$' +sed_double_backslash="\ + s/$_G_bs4/&\\ +/g + s/^$_G_bs2$_G_dollar/$_G_bs&/ + s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g + s/\n//g" -# These SED scripts presuppose an absolute path with a trailing slash. -pathcar='s,^/\([^/]*\).*$,\1,' -pathcdr='s,^/[^/]*,,' -removedotparts=':dotsl - s@/\./@/@g - t dotsl - s,/\.$,/,' -collapseslashes='s@/\{1,\}@/@g' -finalslash='s,/*$,/,' +## ----------------- ## +## Global variables. ## +## ----------------- ## + +# Except for the global variables explicitly listed below, the following +# functions in the '^func_' namespace, and the '^require_' namespace +# variables initialised in the 'Resource management' section, sourcing +# this file will not pollute your global namespace with anything +# else. There's no portable way to scope variables in Bourne shell +# though, so actually running these functions will sometimes place +# results into a variable named after the function, and often use +# temporary variables in the '^_G_' namespace. If you are careful to +# avoid using those namespaces casually in your sourcing script, things +# should continue to work as you expect. And, of course, you can freely +# overwrite any of the functions or variables defined here before +# calling anything to customize them. -# func_normal_abspath PATH -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -# value returned in "$func_normal_abspath_result" -func_normal_abspath () -{ - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` - while :; do - # Processed it all yet? - if test "$func_normal_abspath_tpath" = / ; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result" ; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result -} +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. -# func_relative_path SRCDIR DSTDIR -# generates a relative path from SRCDIR to DSTDIR, with a trailing -# slash if non-empty, suitable for immediately appending a filename -# without needing to append a separator. -# value returned in "$func_relative_path_result" -func_relative_path () -{ - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=${func_dirname_result} - if test "x$func_relative_path_tlibdir" = x ; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done +# Allow overriding, eg assuming that you follow the convention of +# putting '$debug_cmd' at the start of all your functions, you can get +# bash to show function call trace with: +# +# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name +debug_cmd=${debug_cmd-":"} +exit_cmd=: - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test "x$func_stripname_result" != x ; then - func_relative_path_result=${func_relative_path_result}/${func_stripname_result} - fi +# By convention, finish your script with: +# +# exit $exit_status +# +# so that you can set exit_status to non-zero if you want to indicate +# something went wrong during execution without actually bailing out at +# the point of failure. +exit_status=$EXIT_SUCCESS - # Normalisation. If bindir is libdir, return empty string, - # else relative path ending with a slash; either way, target - # file name can be directly appended. - if test ! -z "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result/" - func_relative_path_result=$func_stripname_result - fi -} +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath=$0 -# The name of this program: -func_dirname_and_basename "$progpath" -progname=$func_basename_result +# The name of this program. +progname=`$ECHO "$progpath" |$SED "$sed_basename"` -# Make sure we have an absolute path for reexecution: +# Make sure we have an absolute progpath for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) - progdir=$func_dirname_result + progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` progdir=`cd "$progdir" && pwd` - progpath="$progdir/$progname" + progpath=$progdir/$progname ;; *) - save_IFS="$IFS" + _G_IFS=$IFS IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do - IFS="$save_IFS" + IFS=$_G_IFS test -x "$progdir/$progname" && break done - IFS="$save_IFS" + IFS=$_G_IFS test -n "$progdir" || progdir=`pwd` - progpath="$progdir/$progname" + progpath=$progdir/$progname ;; esac -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' -# Sed substitution that converts a w32 file name or path -# which contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - -# Re-`\' parameter expansions in output of double_quote_subst that were -# `\'-ed in input to the same. If an odd number of `\' preceded a '$' -# in input to double_quote_subst, that '$' was protected from expansion. -# Since each input `\' is now two `\'s, look for any number of runs of -# four `\'s followed by two `\'s and then a '$'. `\' that '$'. -bs='\\' -bs2='\\\\' -bs4='\\\\\\\\' -dollar='\$' -sed_double_backslash="\ - s/$bs4/&\\ -/g - s/^$bs2$dollar/$bs&/ - s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g - s/\n//g" +## ----------------- ## +## Standard options. ## +## ----------------- ## + +# The following options affect the operation of the functions defined +# below, and should be set appropriately depending on run-time para- +# meters passed on the command line. -# Standard options: opt_dry_run=false -opt_help=false opt_quiet=false opt_verbose=false -opt_warning=: - -# func_echo arg... -# Echo program name prefixed message, along with the current mode -# name if it has been set yet. -func_echo () -{ - $ECHO "$progname: ${opt_mode+$opt_mode: }$*" -} -# func_verbose arg... -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $opt_verbose && func_echo ${1+"$@"} +# Categories 'all' and 'none' are always available. Append any others +# you will pass as the first argument to func_warning from your own +# code. +warning_categories= + +# By default, display warnings according to 'opt_warning_types'. Set +# 'warning_func' to ':' to elide all warnings, or func_fatal_error to +# treat the next displayed warning as a fatal error. +warning_func=func_warn_and_continue + +# Set to 'all' to display all warnings, 'none' to suppress all +# warnings, or a space delimited list of some subset of +# 'warning_categories' to display only the listed warnings. +opt_warning_types=all + + +## -------------------- ## +## Resource management. ## +## -------------------- ## + +# This section contains definitions for functions that each ensure a +# particular resource (a file, or a non-empty configuration variable for +# example) is available, and if appropriate to extract default values +# from pertinent package files. Call them using their associated +# 'require_*' variable to ensure that they are executed, at most, once. +# +# It's entirely deliberate that calling these functions can set +# variables that don't obey the namespace limitations obeyed by the rest +# of this file, in order that that they be as useful as possible to +# callers. + + +# require_term_colors +# ------------------- +# Allow display of bold text on terminals that support it. +require_term_colors=func_require_term_colors +func_require_term_colors () +{ + $debug_cmd + + test -t 1 && { + # COLORTERM and USE_ANSI_COLORS environment variables take + # precedence, because most terminfo databases neglect to describe + # whether color sequences are supported. + test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} + + if test 1 = "$USE_ANSI_COLORS"; then + # Standard ANSI escape sequences + tc_reset='' + tc_bold=''; tc_standout='' + tc_red=''; tc_green='' + tc_blue=''; tc_cyan='' + else + # Otherwise trust the terminfo database after all. + test -n "`tput sgr0 2>/dev/null`" && { + tc_reset=`tput sgr0` + test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` + tc_standout=$tc_bold + test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` + test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` + test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` + test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` + test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` + } + fi + } - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : + require_term_colors=: } -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} -# func_error arg... -# Echo program name prefixed message to standard error. -func_error () -{ - $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 -} +## ----------------- ## +## Function library. ## +## ----------------- ## -# func_warning arg... -# Echo program name prefixed warning message to standard error. -func_warning () -{ - $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 +# This section contains a variety of useful functions to call in your +# scripts. Take note of the portable wrappers for features provided by +# some modern shells, which will fall back to slower equivalents on +# less featureful shells. - # bash bug again: - : -} -# func_fatal_error arg... -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - func_error ${1+"$@"} - exit $EXIT_FAILURE -} +# func_append VAR VALUE +# --------------------- +# Append VALUE onto the existing contents of VAR. -# func_fatal_help arg... -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - func_error ${1+"$@"} - func_fatal_error "$help" -} -help="Try \`$progname --help' for more information." ## default + # We should try to minimise forks, especially on Windows where they are + # unreasonably slow, so skip the feature probes when bash or zsh are + # being used: + if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then + : ${_G_HAVE_ARITH_OP="yes"} + : ${_G_HAVE_XSI_OPS="yes"} + # The += operator was introduced in bash 3.1 + case $BASH_VERSION in + [12].* | 3.0 | 3.0*) ;; + *) + : ${_G_HAVE_PLUSEQ_OP="yes"} + ;; + esac + fi + # _G_HAVE_PLUSEQ_OP + # Can be empty, in which case the shell is probed, "yes" if += is + # useable or anything else if it does not work. + test -z "$_G_HAVE_PLUSEQ_OP" \ + && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ + && _G_HAVE_PLUSEQ_OP=yes + +if test yes = "$_G_HAVE_PLUSEQ_OP" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_append () + { + $debug_cmd + + eval "$1+=\$2" + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_append () + { + $debug_cmd + + eval "$1=\$$1\$2" + } +fi + + +# func_append_quoted VAR VALUE +# ---------------------------- +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +if test yes = "$_G_HAVE_PLUSEQ_OP"; then + eval 'func_append_quoted () + { + $debug_cmd + + func_quote_for_eval "$2" + eval "$1+=\\ \$func_quote_for_eval_result" + }' +else + func_append_quoted () + { + $debug_cmd + + func_quote_for_eval "$2" + eval "$1=\$$1\\ \$func_quote_for_eval_result" + } +fi + + +# func_append_uniq VAR VALUE +# -------------------------- +# Append unique VALUE onto the existing contents of VAR, assuming +# entries are delimited by the first character of VALUE. For example: +# +# func_append_uniq options " --another-option option-argument" +# +# will only append to $options if " --another-option option-argument " +# is not already present somewhere in $options already (note spaces at +# each end implied by leading space in second argument). +func_append_uniq () +{ + $debug_cmd + + eval _G_current_value='`$ECHO $'$1'`' + _G_delim=`expr "$2" : '\(.\)'` + + case $_G_delim$_G_current_value$_G_delim in + *"$2$_G_delim"*) ;; + *) func_append "$@" ;; + esac +} + + +# func_arith TERM... +# ------------------ +# Set func_arith_result to the result of evaluating TERMs. + test -z "$_G_HAVE_ARITH_OP" \ + && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ + && _G_HAVE_ARITH_OP=yes + +if test yes = "$_G_HAVE_ARITH_OP"; then + eval 'func_arith () + { + $debug_cmd + + func_arith_result=$(( $* )) + }' +else + func_arith () + { + $debug_cmd + + func_arith_result=`expr "$@"` + } +fi + + +# func_basename FILE +# ------------------ +# Set func_basename_result to FILE with everything up to and including +# the last / stripped. +if test yes = "$_G_HAVE_XSI_OPS"; then + # If this shell supports suffix pattern removal, then use it to avoid + # forking. Hide the definitions single quotes in case the shell chokes + # on unsupported syntax... + _b='func_basename_result=${1##*/}' + _d='case $1 in + */*) func_dirname_result=${1%/*}$2 ;; + * ) func_dirname_result=$3 ;; + esac' + +else + # ...otherwise fall back to using sed. + _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' + _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` + if test "X$func_dirname_result" = "X$1"; then + func_dirname_result=$3 + else + func_append func_dirname_result "$2" + fi' +fi + +eval 'func_basename () +{ + $debug_cmd + + '"$_b"' +}' + + +# func_dirname FILE APPEND NONDIR_REPLACEMENT +# ------------------------------------------- +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +eval 'func_dirname () +{ + $debug_cmd -# func_grep expression filename + '"$_d"' +}' + + +# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT +# -------------------------------------------------------- +# Perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# For efficiency, we do not delegate to the functions above but instead +# duplicate the functionality here. +eval 'func_dirname_and_basename () +{ + $debug_cmd + + '"$_b"' + '"$_d"' +}' + + +# func_echo ARG... +# ---------------- +# Echo program name prefixed message. +func_echo () +{ + $debug_cmd + + _G_message=$* + + func_echo_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_IFS + $ECHO "$progname: $_G_line" + done + IFS=$func_echo_IFS +} + + +# func_echo_all ARG... +# -------------------- +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + + +# func_echo_infix_1 INFIX ARG... +# ------------------------------ +# Echo program name, followed by INFIX on the first line, with any +# additional lines not showing INFIX. +func_echo_infix_1 () +{ + $debug_cmd + + $require_term_colors + + _G_infix=$1; shift + _G_indent=$_G_infix + _G_prefix="$progname: $_G_infix: " + _G_message=$* + + # Strip color escape sequences before counting printable length + for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" + do + test -n "$_G_tc" && { + _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` + _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` + } + done + _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes + + func_echo_infix_1_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_infix_1_IFS + $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 + _G_prefix=$_G_indent + done + IFS=$func_echo_infix_1_IFS +} + + +# func_error ARG... +# ----------------- +# Echo program name prefixed message to standard error. +func_error () +{ + $debug_cmd + + $require_term_colors + + func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 +} + + +# func_fatal_error ARG... +# ----------------------- +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + $debug_cmd + + func_error "$*" + exit $EXIT_FAILURE +} + + +# func_grep EXPRESSION FILENAME +# ----------------------------- # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { + $debug_cmd + $GREP "$1" "$2" >/dev/null 2>&1 } -# func_mkdir_p directory-path +# func_len STRING +# --------------- +# Set func_len_result to the length of STRING. STRING may not +# start with a hyphen. + test -z "$_G_HAVE_XSI_OPS" \ + && (eval 'x=a/b/c; + test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ + && _G_HAVE_XSI_OPS=yes + +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_len () + { + $debug_cmd + + func_len_result=${#1} + }' +else + func_len () + { + $debug_cmd + + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` + } +fi + + +# func_mkdir_p DIRECTORY-PATH +# --------------------------- # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { - my_directory_path="$1" - my_dir_list= + $debug_cmd + + _G_directory_path=$1 + _G_dir_list= - if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then - # Protect directory names starting with `-' - case $my_directory_path in - -*) my_directory_path="./$my_directory_path" ;; + # Protect directory names starting with '-' + case $_G_directory_path in + -*) _G_directory_path=./$_G_directory_path ;; esac # While some portion of DIR does not yet exist... - while test ! -d "$my_directory_path"; do + while test ! -d "$_G_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. - my_dir_list="$my_directory_path:$my_dir_list" + _G_dir_list=$_G_directory_path:$_G_dir_list # If the last portion added has no slash in it, the list is done - case $my_directory_path in */*) ;; *) break ;; esac + case $_G_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` done - my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` - save_mkdir_p_IFS="$IFS"; IFS=':' - for my_dir in $my_dir_list; do - IFS="$save_mkdir_p_IFS" - # mkdir can fail with a `File exist' error if two processes + func_mkdir_p_IFS=$IFS; IFS=: + for _G_dir in $_G_dir_list; do + IFS=$func_mkdir_p_IFS + # mkdir can fail with a 'File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! - $MKDIR "$my_dir" 2>/dev/null || : + $MKDIR "$_G_dir" 2>/dev/null || : done - IFS="$save_mkdir_p_IFS" + IFS=$func_mkdir_p_IFS # Bail out if we (or some other process) failed to create a directory. - test -d "$my_directory_path" || \ - func_fatal_error "Failed to create \`$1'" + test -d "$_G_directory_path" || \ + func_fatal_error "Failed to create '$1'" fi } -# func_mktempdir [string] +# func_mktempdir [BASENAME] +# ------------------------- # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If -# given, STRING is the basename for that directory. +# given, BASENAME is the basename for that directory. func_mktempdir () { - my_template="${TMPDIR-/tmp}/${1-$progname}" + $debug_cmd + + _G_template=${TMPDIR-/tmp}/${1-$progname} - if test "$opt_dry_run" = ":"; then + if test : = "$opt_dry_run"; then # Return a directory name, but don't create it in dry-run mode - my_tmpdir="${my_template}-$$" + _G_tmpdir=$_G_template-$$ else # If mktemp works, use that first and foremost - my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` - if test ! -d "$my_tmpdir"; then + if test ! -d "$_G_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" + _G_tmpdir=$_G_template-${RANDOM-0}$$ + + func_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$_G_tmpdir" + umask $func_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$_G_tmpdir" || \ + func_fatal_error "cannot create temporary directory '$_G_tmpdir'" + fi + + $ECHO "$_G_tmpdir" +} + + +# func_normal_abspath PATH +# ------------------------ +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +func_normal_abspath () +{ + $debug_cmd + + # These SED scripts presuppose an absolute path with a trailing slash. + _G_pathcar='s|^/\([^/]*\).*$|\1|' + _G_pathcdr='s|^/[^/]*||' + _G_removedotparts=':dotsl + s|/\./|/|g + t dotsl + s|/\.$|/|' + _G_collapseslashes='s|/\{1,\}|/|g' + _G_finalslash='s|/*$|/|' + + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` + while :; do + # Processed it all yet? + if test / = "$func_normal_abspath_tpath"; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result"; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + + +# func_notquiet ARG... +# -------------------- +# Echo program name prefixed message only when not in quiet mode. +func_notquiet () +{ + $debug_cmd + + $opt_quiet || func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + + +# func_relative_path SRCDIR DSTDIR +# -------------------------------- +# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. +func_relative_path () +{ + $debug_cmd + + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=$func_dirname_result + if test -z "$func_relative_path_tlibdir"; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test -n "$func_stripname_result"; then + func_append func_relative_path_result "/$func_stripname_result" + fi + + # Normalisation. If bindir is libdir, return '.' else relative path. + if test -n "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + fi + + test -n "$func_relative_path_result" || func_relative_path_result=. + + : +} + + +# func_quote_for_eval ARG... +# -------------------------- +# Aesthetically quote ARGs to be evaled later. +# This function returns two values: +# i) func_quote_for_eval_result +# double-quoted, suitable for a subsequent eval +# ii) func_quote_for_eval_unquoted_result +# has all characters that are still active within double +# quotes backslashified. +func_quote_for_eval () +{ + $debug_cmd + + func_quote_for_eval_unquoted_result= + func_quote_for_eval_result= + while test 0 -lt $#; do + case $1 in + *[\\\`\"\$]*) + _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; + *) + _G_unquoted_arg=$1 ;; + esac + if test -n "$func_quote_for_eval_unquoted_result"; then + func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" + else + func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" + fi + + case $_G_unquoted_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and variable expansion + # for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_quoted_arg=\"$_G_unquoted_arg\" + ;; + *) + _G_quoted_arg=$_G_unquoted_arg + ;; + esac + + if test -n "$func_quote_for_eval_result"; then + func_append func_quote_for_eval_result " $_G_quoted_arg" + else + func_append func_quote_for_eval_result "$_G_quoted_arg" + fi + shift + done +} + + +# func_quote_for_expand ARG +# ------------------------- +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + $debug_cmd + + case $1 in + *[\\\`\"]*) + _G_arg=`$ECHO "$1" | $SED \ + -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; + *) + _G_arg=$1 ;; + esac + + case $_G_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_arg=\"$_G_arg\" + ;; + esac + + func_quote_for_expand_result=$_G_arg +} + + +# func_stripname PREFIX SUFFIX NAME +# --------------------------------- +# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_stripname () + { + $debug_cmd + + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary variable first. + func_stripname_result=$3 + func_stripname_result=${func_stripname_result#"$1"} + func_stripname_result=${func_stripname_result%"$2"} + }' +else + func_stripname () + { + $debug_cmd + + case $2 in + .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; + *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; + esac + } +fi + + +# func_show_eval CMD [FAIL_EXP] +# ----------------------------- +# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + $debug_cmd + + _G_cmd=$1 + _G_fail_exp=${2-':'} + + func_quote_for_expand "$_G_cmd" + eval "func_notquiet $func_quote_for_expand_result" + + $opt_dry_run || { + eval "$_G_cmd" + _G_status=$? + if test 0 -ne "$_G_status"; then + eval "(exit $_G_status); $_G_fail_exp" + fi + } +} + + +# func_show_eval_locale CMD [FAIL_EXP] +# ------------------------------------ +# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + $debug_cmd + + _G_cmd=$1 + _G_fail_exp=${2-':'} + + $opt_quiet || { + func_quote_for_expand "$_G_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + $opt_dry_run || { + eval "$_G_user_locale + $_G_cmd" + _G_status=$? + eval "$_G_safe_locale" + if test 0 -ne "$_G_status"; then + eval "(exit $_G_status); $_G_fail_exp" + fi + } +} + + +# func_tr_sh +# ---------- +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + $debug_cmd + + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_verbose ARG... +# ------------------- +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $debug_cmd + + $opt_verbose && func_echo "$*" + + : +} + + +# func_warn_and_continue ARG... +# ----------------------------- +# Echo program name prefixed warning message to standard error. +func_warn_and_continue () +{ + $debug_cmd + + $require_term_colors + + func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 +} + + +# func_warning CATEGORY ARG... +# ---------------------------- +# Echo program name prefixed warning message to standard error. Warning +# messages can be filtered according to CATEGORY, where this function +# elides messages where CATEGORY is not listed in the global variable +# 'opt_warning_types'. +func_warning () +{ + $debug_cmd + + # CATEGORY must be in the warning_categories list! + case " $warning_categories " in + *" $1 "*) ;; + *) func_internal_error "invalid warning category '$1'" ;; + esac + + _G_category=$1 + shift + + case " $opt_warning_types " in + *" $_G_category "*) $warning_func ${1+"$@"} ;; + esac +} + + +# func_sort_ver VER1 VER2 +# ----------------------- +# 'sort -V' is not generally available. +# Note this deviates from the version comparison in automake +# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a +# but this should suffice as we won't be specifying old +# version formats or redundant trailing .0 in bootstrap.conf. +# If we did want full compatibility then we should probably +# use m4_version_compare from autoconf. +func_sort_ver () +{ + $debug_cmd + + printf '%s\n%s\n' "$1" "$2" \ + | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n +} + +# func_lt_ver PREV CURR +# --------------------- +# Return true if PREV and CURR are in the correct order according to +# func_sort_ver, otherwise false. Use it like this: +# +# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." +func_lt_ver () +{ + $debug_cmd + + test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` +} + + +# Local variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-time-zone: "UTC" +# End: +#! /bin/sh + +# Set a version string for this script. +scriptversion=2014-01-07.03; # UTC + +# A portable, pluggable option parser for Bourne shell. +# Written by Gary V. Vaughan, 2010 + +# Copyright (C) 2010-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Please report bugs or propose patches to gary@gnu.org. + + +## ------ ## +## Usage. ## +## ------ ## + +# This file is a library for parsing options in your shell scripts along +# with assorted other useful supporting features that you can make use +# of too. +# +# For the simplest scripts you might need only: +# +# #!/bin/sh +# . relative/path/to/funclib.sh +# . relative/path/to/options-parser +# scriptversion=1.0 +# func_options ${1+"$@"} +# eval set dummy "$func_options_result"; shift +# ...rest of your script... +# +# In order for the '--version' option to work, you will need to have a +# suitably formatted comment like the one at the top of this file +# starting with '# Written by ' and ending with '# warranty; '. +# +# For '-h' and '--help' to work, you will also need a one line +# description of your script's purpose in a comment directly above the +# '# Written by ' line, like the one at the top of this file. +# +# The default options also support '--debug', which will turn on shell +# execution tracing (see the comment above debug_cmd below for another +# use), and '--verbose' and the func_verbose function to allow your script +# to display verbose messages only when your user has specified +# '--verbose'. +# +# After sourcing this file, you can plug processing for additional +# options by amending the variables from the 'Configuration' section +# below, and following the instructions in the 'Option parsing' +# section further down. + +## -------------- ## +## Configuration. ## +## -------------- ## + +# You should override these variables in your script after sourcing this +# file so that they reflect the customisations you have added to the +# option parser. + +# The usage line for option parsing errors and the start of '-h' and +# '--help' output messages. You can embed shell variables for delayed +# expansion at the time the message is displayed, but you will need to +# quote other shell meta-characters carefully to prevent them being +# expanded when the contents are evaled. +usage='$progpath [OPTION]...' + +# Short help message in response to '-h' and '--help'. Add to this or +# override it after sourcing this library to reflect the full set of +# options your script accepts. +usage_message="\ + --debug enable verbose shell tracing + -W, --warnings=CATEGORY + report the warnings falling in CATEGORY [all] + -v, --verbose verbosely report processing + --version print version information and exit + -h, --help print short or long help message and exit +" + +# Additional text appended to 'usage_message' in response to '--help'. +long_help_message=" +Warning categories include: + 'all' show all warnings + 'none' turn off all the warnings + 'error' warnings are treated as fatal errors" + +# Help message printed before fatal option parsing errors. +fatal_help="Try '\$progname --help' for more information." + + + +## ------------------------- ## +## Hook function management. ## +## ------------------------- ## + +# This section contains functions for adding, removing, and running hooks +# to the main code. A hook is just a named list of of function, that can +# be run in order later on. + +# func_hookable FUNC_NAME +# ----------------------- +# Declare that FUNC_NAME will run hooks added with +# 'func_add_hook FUNC_NAME ...'. +func_hookable () +{ + $debug_cmd + + func_append hookable_fns " $1" +} + + +# func_add_hook FUNC_NAME HOOK_FUNC +# --------------------------------- +# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must +# first have been declared "hookable" by a call to 'func_hookable'. +func_add_hook () +{ + $debug_cmd + + case " $hookable_fns " in + *" $1 "*) ;; + *) func_fatal_error "'$1' does not accept hook functions." ;; + esac + + eval func_append ${1}_hooks '" $2"' +} + + +# func_remove_hook FUNC_NAME HOOK_FUNC +# ------------------------------------ +# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. +func_remove_hook () +{ + $debug_cmd + + eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' +} + + +# func_run_hooks FUNC_NAME [ARG]... +# --------------------------------- +# Run all hook functions registered to FUNC_NAME. +# It is assumed that the list of hook functions contains nothing more +# than a whitespace-delimited list of legal shell function names, and +# no effort is wasted trying to catch shell meta-characters or preserve +# whitespace. +func_run_hooks () +{ + $debug_cmd + + case " $hookable_fns " in + *" $1 "*) ;; + *) func_fatal_error "'$1' does not support hook funcions.n" ;; + esac + + eval _G_hook_fns=\$$1_hooks; shift + + for _G_hook in $_G_hook_fns; do + eval $_G_hook '"$@"' + + # store returned options list back into positional + # parameters for next 'cmd' execution. + eval _G_hook_result=\$${_G_hook}_result + eval set dummy "$_G_hook_result"; shift + done + + func_quote_for_eval ${1+"$@"} + func_run_hooks_result=$func_quote_for_eval_result +} + + + +## --------------- ## +## Option parsing. ## +## --------------- ## + +# In order to add your own option parsing hooks, you must accept the +# full positional parameter list in your hook function, remove any +# options that you action, and then pass back the remaining unprocessed +# options in '_result', escaped suitably for +# 'eval'. Like this: +# +# my_options_prep () +# { +# $debug_cmd +# +# # Extend the existing usage message. +# usage_message=$usage_message' +# -s, --silent don'\''t print informational messages +# ' +# +# func_quote_for_eval ${1+"$@"} +# my_options_prep_result=$func_quote_for_eval_result +# } +# func_add_hook func_options_prep my_options_prep +# +# +# my_silent_option () +# { +# $debug_cmd +# +# # Note that for efficiency, we parse as many options as we can +# # recognise in a loop before passing the remainder back to the +# # caller on the first unrecognised argument we encounter. +# while test $# -gt 0; do +# opt=$1; shift +# case $opt in +# --silent|-s) opt_silent=: ;; +# # Separate non-argument short options: +# -s*) func_split_short_opt "$_G_opt" +# set dummy "$func_split_short_opt_name" \ +# "-$func_split_short_opt_arg" ${1+"$@"} +# shift +# ;; +# *) set dummy "$_G_opt" "$*"; shift; break ;; +# esac +# done +# +# func_quote_for_eval ${1+"$@"} +# my_silent_option_result=$func_quote_for_eval_result +# } +# func_add_hook func_parse_options my_silent_option +# +# +# my_option_validation () +# { +# $debug_cmd +# +# $opt_silent && $opt_verbose && func_fatal_help "\ +# '--silent' and '--verbose' options are mutually exclusive." +# +# func_quote_for_eval ${1+"$@"} +# my_option_validation_result=$func_quote_for_eval_result +# } +# func_add_hook func_validate_options my_option_validation +# +# You'll alse need to manually amend $usage_message to reflect the extra +# options you parse. It's preferable to append if you can, so that +# multiple option parsing hooks can be added safely. + + +# func_options [ARG]... +# --------------------- +# All the functions called inside func_options are hookable. See the +# individual implementations for details. +func_hookable func_options +func_options () +{ + $debug_cmd - save_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$my_tmpdir" - umask $save_mktempdir_umask - fi + func_options_prep ${1+"$@"} + eval func_parse_options \ + ${func_options_prep_result+"$func_options_prep_result"} + eval func_validate_options \ + ${func_parse_options_result+"$func_parse_options_result"} - # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || \ - func_fatal_error "cannot create temporary directory \`$my_tmpdir'" - fi + eval func_run_hooks func_options \ + ${func_validate_options_result+"$func_validate_options_result"} - $ECHO "$my_tmpdir" + # save modified positional parameters for caller + func_options_result=$func_run_hooks_result } -# func_quote_for_eval arg -# Aesthetically quote ARG to be evaled later. -# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -# is double-quoted, suitable for a subsequent eval, whereas -# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -# which are still active within double quotes backslashified. -func_quote_for_eval () +# func_options_prep [ARG]... +# -------------------------- +# All initialisations required before starting the option parse loop. +# Note that when calling hook functions, we pass through the list of +# positional parameters. If a hook function modifies that list, and +# needs to propogate that back to rest of this script, then the complete +# modified list must be put in 'func_run_hooks_result' before +# returning. +func_hookable func_options_prep +func_options_prep () { - case $1 in - *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; - *) - func_quote_for_eval_unquoted_result="$1" ;; - esac + $debug_cmd - case $func_quote_for_eval_unquoted_result in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and and variable - # expansion for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" - ;; - *) - func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" - esac + # Option defaults: + opt_verbose=false + opt_warning_types= + + func_run_hooks func_options_prep ${1+"$@"} + + # save modified positional parameters for caller + func_options_prep_result=$func_run_hooks_result } -# func_quote_for_expand arg -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () +# func_parse_options [ARG]... +# --------------------------- +# The main option parsing loop. +func_hookable func_parse_options +func_parse_options () { - case $1 in - *[\\\`\"]*) - my_arg=`$ECHO "$1" | $SED \ - -e "$double_quote_subst" -e "$sed_double_backslash"` ;; - *) - my_arg="$1" ;; - esac + $debug_cmd - case $my_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - my_arg="\"$my_arg\"" - ;; - esac + func_parse_options_result= - func_quote_for_expand_result="$my_arg" -} + # this just eases exit handling + while test $# -gt 0; do + # Defer to hook functions for initial option parsing, so they + # get priority in the event of reusing an option name. + func_run_hooks func_parse_options ${1+"$@"} + # Adjust func_parse_options positional parameters to match + eval set dummy "$func_run_hooks_result"; shift -# func_show_eval cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - my_cmd="$1" - my_fail_exp="${2-:}" + # Break out of the loop if we already parsed every option. + test $# -gt 0 || break - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } + _G_opt=$1 + shift + case $_G_opt in + --debug|-x) debug_cmd='set -x' + func_echo "enabling shell trace mode" + $debug_cmd + ;; + + --no-warnings|--no-warning|--no-warn) + set dummy --warnings none ${1+"$@"} + shift + ;; - if ${opt_dry_run-false}; then :; else - eval "$my_cmd" - my_status=$? - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi + --warnings|--warning|-W) + test $# = 0 && func_missing_arg $_G_opt && break + case " $warning_categories $1" in + *" $1 "*) + # trailing space prevents matching last $1 above + func_append_uniq opt_warning_types " $1" + ;; + *all) + opt_warning_types=$warning_categories + ;; + *none) + opt_warning_types=none + warning_func=: + ;; + *error) + opt_warning_types=$warning_categories + warning_func=func_fatal_error + ;; + *) + func_fatal_error \ + "unsupported warning category: '$1'" + ;; + esac + shift + ;; + + --verbose|-v) opt_verbose=: ;; + --version) func_version ;; + -\?|-h) func_usage ;; + --help) func_help ;; + + # Separate optargs to long options (plugins may need this): + --*=*) func_split_equals "$_G_opt" + set dummy "$func_split_equals_lhs" \ + "$func_split_equals_rhs" ${1+"$@"} + shift + ;; + + # Separate optargs to short options: + -W*) + func_split_short_opt "$_G_opt" + set dummy "$func_split_short_opt_name" \ + "$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-v*|-x*) + func_split_short_opt "$_G_opt" + set dummy "$func_split_short_opt_name" \ + "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; + *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + esac + done + + # save modified positional parameters for caller + func_quote_for_eval ${1+"$@"} + func_parse_options_result=$func_quote_for_eval_result } -# func_show_eval_locale cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () +# func_validate_options [ARG]... +# ------------------------------ +# Perform any sanity checks on option settings and/or unconsumed +# arguments. +func_hookable func_validate_options +func_validate_options () { - my_cmd="$1" - my_fail_exp="${2-:}" + $debug_cmd - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } + # Display all warnings if -W was not given. + test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" - if ${opt_dry_run-false}; then :; else - eval "$lt_user_locale - $my_cmd" - my_status=$? - eval "$lt_safe_locale" - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} + func_run_hooks func_validate_options ${1+"$@"} -# func_tr_sh -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac + # Bail if the options were screwed! + $exit_cmd $EXIT_FAILURE + + # save modified positional parameters for caller + func_validate_options_result=$func_run_hooks_result } -# func_version -# Echo version message to standard output and exit. -func_version () -{ - $opt_debug - $SED -n '/(C)/!b go - :more - /\./!{ - N - s/\n# / / - b more - } - :go - /^# '$PROGRAM' (GNU /,/# warranty; / { - s/^# // - s/^# *$// - s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ - p - }' < "$progpath" - exit $? -} +## ----------------- ## +## Helper functions. ## +## ----------------- ## -# func_usage -# Echo short help message to standard output and exit. -func_usage () +# This section contains the helper functions used by the rest of the +# hookable option parser framework in ascii-betical order. + + +# func_fatal_help ARG... +# ---------------------- +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () { - $opt_debug + $debug_cmd - $SED -n '/^# Usage:/,/^# *.*--help/ { - s/^# // - s/^# *$// - s/\$progname/'$progname'/ - p - }' < "$progpath" - echo - $ECHO "run \`$progname --help | more' for full usage" - exit $? + eval \$ECHO \""Usage: $usage"\" + eval \$ECHO \""$fatal_help"\" + func_error ${1+"$@"} + exit $EXIT_FAILURE } -# func_help [NOEXIT] -# Echo long help message to standard output and exit, -# unless 'noexit' is passed as argument. + +# func_help +# --------- +# Echo long help message to standard output and exit. func_help () { - $opt_debug + $debug_cmd - $SED -n '/^# Usage:/,/# Report bugs to/ { - :print - s/^# // - s/^# *$// - s*\$progname*'$progname'* - s*\$host*'"$host"'* - s*\$SHELL*'"$SHELL"'* - s*\$LTCC*'"$LTCC"'* - s*\$LTCFLAGS*'"$LTCFLAGS"'* - s*\$LD*'"$LD"'* - s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ - p - d - } - /^# .* home page:/b print - /^# General help using/b print - ' < "$progpath" - ret=$? - if test -z "$1"; then - exit $ret - fi + func_usage_message + $ECHO "$long_help_message" + exit 0 } -# func_missing_arg argname + +# func_missing_arg ARGNAME +# ------------------------ # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { - $opt_debug + $debug_cmd - func_error "missing argument for $1." + func_error "Missing argument for '$1'." exit_cmd=exit } -# func_split_short_opt shortopt +# func_split_equals STRING +# ------------------------ +# Set func_split_equals_lhs and func_split_equals_rhs shell variables after +# splitting STRING at the '=' sign. +test -z "$_G_HAVE_XSI_OPS" \ + && (eval 'x=a/b/c; + test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ + && _G_HAVE_XSI_OPS=yes + +if test yes = "$_G_HAVE_XSI_OPS" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_split_equals () + { + $debug_cmd + + func_split_equals_lhs=${1%%=*} + func_split_equals_rhs=${1#*=} + test "x$func_split_equals_lhs" = "x$1" \ + && func_split_equals_rhs= + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_split_equals () + { + $debug_cmd + + func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` + func_split_equals_rhs= + test "x$func_split_equals_lhs" = "x$1" \ + || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` + } +fi #func_split_equals + + +# func_split_short_opt SHORTOPT +# ----------------------------- # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. -func_split_short_opt () +if test yes = "$_G_HAVE_XSI_OPS" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_split_short_opt () + { + $debug_cmd + + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"} + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_split_short_opt () + { + $debug_cmd + + func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` + func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` + } +fi #func_split_short_opt + + +# func_usage +# ---------- +# Echo short help message to standard output and exit. +func_usage () { - my_sed_short_opt='1s/^\(..\).*$/\1/;q' - my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + $debug_cmd - func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` - func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` -} # func_split_short_opt may be replaced by extended shell implementation + func_usage_message + $ECHO "Run '$progname --help |${PAGER-more}' for full usage" + exit 0 +} -# func_split_long_opt longopt -# Set func_split_long_opt_name and func_split_long_opt_arg shell -# variables after splitting LONGOPT at the `=' sign. -func_split_long_opt () +# func_usage_message +# ------------------ +# Echo short help message to standard output. +func_usage_message () { - my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' - my_sed_long_arg='1s/^--[^=]*=//' + $debug_cmd - func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` - func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` -} # func_split_long_opt may be replaced by extended shell implementation + eval \$ECHO \""Usage: $usage"\" + echo + $SED -n 's|^# || + /^Written by/{ + x;p;x + } + h + /^Written by/q' < "$progpath" + echo + eval \$ECHO \""$usage_message"\" +} -exit_cmd=: +# func_version +# ------------ +# Echo version message to standard output and exit. +func_version () +{ + $debug_cmd + printf '%s\n' "$progname $scriptversion" + $SED -n ' + /(C)/!b go + :more + /\./!{ + N + s|\n# | | + b more + } + :go + /^# Written by /,/# warranty; / { + s|^# || + s|^# *$|| + s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| + p + } + /^# Written by / { + s|^# || + p + } + /^warranty; /q' < "$progpath" + exit $? +} -magic="%%%MAGIC variable%%%" -magic_exe="%%%MAGIC EXE variable%%%" +# Local variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-time-zone: "UTC" +# End: -# Global variables. -nonopt= -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 +# Set a version string. +scriptversion='(GNU libtool) 2.4.6' -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () +# func_echo ARG... +# ---------------- +# Libtool also displays the current mode in messages, so override +# funclib.sh func_echo with this custom definition. +func_echo () { - eval "${1}=\$${1}\${2}" -} # func_append may be replaced by extended shell implementation + $debug_cmd -# func_append_quoted var value -# Quote VALUE and append to the end of shell variable VAR, separated -# by a space. -func_append_quoted () -{ - func_quote_for_eval "${2}" - eval "${1}=\$${1}\\ \$func_quote_for_eval_result" -} # func_append_quoted may be replaced by extended shell implementation + _G_message=$* + + func_echo_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_IFS + $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" + done + IFS=$func_echo_IFS +} -# func_arith arithmetic-term... -func_arith () +# func_warning ARG... +# ------------------- +# Libtool warnings are not categorized, so override funclib.sh +# func_warning with this simpler definition. +func_warning () { - func_arith_result=`expr "${@}"` -} # func_arith may be replaced by extended shell implementation + $debug_cmd + $warning_func ${1+"$@"} +} -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` -} # func_len may be replaced by extended shell implementation +## ---------------- ## +## Options parsing. ## +## ---------------- ## + +# Hook in the functions to make sure our own options are parsed during +# the option parsing loop. + +usage='$progpath [OPTION]... [MODE-ARG]...' + +# Short help message in response to '-h'. +usage_message="Options: + --config show all configuration variables + --debug enable verbose shell tracing + -n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --mode=MODE use operation mode MODE + --no-warnings equivalent to '-Wnone' + --preserve-dup-deps don't remove duplicate dependency libraries + --quiet, --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + -v, --verbose print more informational messages than default + --version print version information + -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] + -h, --help, --help-all print short, long, or detailed help message +" -# func_lo2o object -func_lo2o () +# Additional text appended to 'usage_message' in response to '--help'. +func_help () { - func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` -} # func_lo2o may be replaced by extended shell implementation + $debug_cmd + func_usage_message + $ECHO "$long_help_message -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` -} # func_xform may be replaced by extended shell implementation +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. When passed as first option, +'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. +Try '$progname --help --mode=MODE' for a more detailed description of MODE. + +When reporting a bug, please describe a test case to reproduce it and +include the following information: + + host-triplet: $host + shell: $SHELL + compiler: $LTCC + compiler flags: $LTCFLAGS + linker: $LD (gnu? $with_gnu_ld) + version: $progname $scriptversion Debian-2.4.6-2 + automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` + autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` + +Report bugs to . +GNU libtool home page: . +General help using GNU software: ." + exit 0 +} + + +# func_lo2o OBJECT-NAME +# --------------------- +# Transform OBJECT-NAME from a '.lo' suffix to the platform specific +# object suffix. + +lo2o=s/\\.lo\$/.$objext/ +o2lo=s/\\.$objext\$/.lo/ + +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_lo2o () + { + case $1 in + *.lo) func_lo2o_result=${1%.lo}.$objext ;; + * ) func_lo2o_result=$1 ;; + esac + }' + + # func_xform LIBOBJ-OR-SOURCE + # --------------------------- + # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) + # suffix to a '.lo' libtool-object suffix. + eval 'func_xform () + { + func_xform_result=${1%.*}.lo + }' +else + # ...otherwise fall back to using sed. + func_lo2o () + { + func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` + } + + func_xform () + { + func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` + } +fi -# func_fatal_configuration arg... +# func_fatal_configuration ARG... +# ------------------------------- # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { - func_error ${1+"$@"} - func_error "See the $PACKAGE documentation for more information." - func_fatal_error "Fatal configuration error." + func__fatal_error ${1+"$@"} \ + "See the $PACKAGE documentation for more information." \ + "Fatal configuration error." } # func_config +# ----------- # Display the configuration for all the tags in this script. func_config () { @@ -915,17 +2149,19 @@ exit $? } + # func_features +# ------------- # Display the features supported by this script. func_features () { echo "host: $host" - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then echo "enable shared libraries" else echo "disable shared libraries" fi - if test "$build_old_libs" = yes; then + if test yes = "$build_old_libs"; then echo "enable static libraries" else echo "disable static libraries" @@ -934,289 +2170,297 @@ exit $? } -# func_enable_tag tagname + +# func_enable_tag TAGNAME +# ----------------------- # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { - # Global variable: - tagname="$1" + # Global variable: + tagname=$1 - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf="/$re_begincf/,/$re_endcf/p" - - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf=/$re_begincf/,/$re_endcf/p + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac } + # func_check_version_match +# ------------------------ # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF - else - cat >&2 <<_LT_EOF + else + cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF - fi - else - cat >&2 <<_LT_EOF + fi + else + cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF - fi + fi - exit $EXIT_MISMATCH - fi + exit $EXIT_MISMATCH + fi } -# Shorthand for --mode=foo, only valid as the first argument -case $1 in -clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; -compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; -execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; -finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; -install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; -link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; -uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; -esac +# libtool_options_prep [ARG]... +# ----------------------------- +# Preparation for options parsed by libtool. +libtool_options_prep () +{ + $debug_mode + # Option defaults: + opt_config=false + opt_dlopen= + opt_dry_run=false + opt_help=false + opt_mode= + opt_preserve_dup_deps=false + opt_quiet=false + nonopt= + preserve_args= -# Option defaults: -opt_debug=: -opt_dry_run=false -opt_config=false -opt_preserve_dup_deps=false -opt_features=false -opt_finish=false -opt_help=false -opt_help_all=false -opt_silent=: -opt_warning=: -opt_verbose=: -opt_silent=false -opt_verbose=false + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac + # Pass back the list of options. + func_quote_for_eval ${1+"$@"} + libtool_options_prep_result=$func_quote_for_eval_result +} +func_add_hook func_options_prep libtool_options_prep -# Parse options once, thoroughly. This comes as soon as possible in the -# script to make things like `--version' happen as quickly as we can. -{ - # this just eases exit handling - while test $# -gt 0; do - opt="$1" - shift - case $opt in - --debug|-x) opt_debug='set -x' - func_echo "enabling shell trace mode" - $opt_debug - ;; - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - --config) - opt_config=: -func_config - ;; - --dlopen|-dlopen) - optarg="$1" - opt_dlopen="${opt_dlopen+$opt_dlopen -}$optarg" - shift - ;; - --preserve-dup-deps) - opt_preserve_dup_deps=: - ;; - --features) - opt_features=: -func_features - ;; - --finish) - opt_finish=: -set dummy --mode finish ${1+"$@"}; shift - ;; - --help) - opt_help=: - ;; - --help-all) - opt_help_all=: -opt_help=': help-all' - ;; - --mode) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_mode="$optarg" -case $optarg in - # Valid mode arguments: - clean|compile|execute|finish|install|link|relink|uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; -esac - shift - ;; - --no-silent|--no-quiet) - opt_silent=false -func_append preserve_args " $opt" - ;; - --no-warning|--no-warn) - opt_warning=false -func_append preserve_args " $opt" - ;; - --no-verbose) - opt_verbose=false -func_append preserve_args " $opt" - ;; - --silent|--quiet) - opt_silent=: -func_append preserve_args " $opt" - opt_verbose=false - ;; - --verbose|-v) - opt_verbose=: -func_append preserve_args " $opt" -opt_silent=false - ;; - --tag) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_tag="$optarg" -func_append preserve_args " $opt $optarg" -func_enable_tag "$optarg" - shift - ;; - - -\?|-h) func_usage ;; - --help) func_help ;; - --version) func_version ;; - - # Separate optargs to long options: - --*=*) - func_split_long_opt "$opt" - set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} - shift - ;; - - # Separate non-argument short options: - -\?*|-h*|-n*|-v*) - func_split_short_opt "$opt" - set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} - shift - ;; - - --) break ;; - -*) func_fatal_help "unrecognized option \`$opt'" ;; - *) set dummy "$opt" ${1+"$@"}; shift; break ;; - esac - done - # Validate options: +# libtool_parse_options [ARG]... +# --------------------------------- +# Provide handling for libtool specific options. +libtool_parse_options () +{ + $debug_cmd - # save first non-option argument - if test "$#" -gt 0; then - nonopt="$opt" - shift - fi + # Perform our own loop to consume as many options as possible in + # each iteration. + while test $# -gt 0; do + _G_opt=$1 + shift + case $_G_opt in + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + + --config) func_config ;; + + --dlopen|-dlopen) + opt_dlopen="${opt_dlopen+$opt_dlopen +}$1" + shift + ;; + + --preserve-dup-deps) + opt_preserve_dup_deps=: ;; + + --features) func_features ;; + + --finish) set dummy --mode finish ${1+"$@"}; shift ;; + + --help) opt_help=: ;; + + --help-all) opt_help=': help-all' ;; + + --mode) test $# = 0 && func_missing_arg $_G_opt && break + opt_mode=$1 + case $1 in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $_G_opt" + exit_cmd=exit + break + ;; + esac + shift + ;; + + --no-silent|--no-quiet) + opt_quiet=false + func_append preserve_args " $_G_opt" + ;; + + --no-warnings|--no-warning|--no-warn) + opt_warning=false + func_append preserve_args " $_G_opt" + ;; + + --no-verbose) + opt_verbose=false + func_append preserve_args " $_G_opt" + ;; + + --silent|--quiet) + opt_quiet=: + opt_verbose=false + func_append preserve_args " $_G_opt" + ;; + + --tag) test $# = 0 && func_missing_arg $_G_opt && break + opt_tag=$1 + func_append preserve_args " $_G_opt $1" + func_enable_tag "$1" + shift + ;; + + --verbose|-v) opt_quiet=false + opt_verbose=: + func_append preserve_args " $_G_opt" + ;; - # preserve --debug - test "$opt_debug" = : || func_append preserve_args " --debug" + # An option not handled by this hook function: + *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + esac + done - case $host in - *cygwin* | *mingw* | *pw32* | *cegcc*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: - ;; - *) - opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps - ;; - esac - $opt_help || { - # Sanity checks first: - func_check_version_match + # save modified positional parameters for caller + func_quote_for_eval ${1+"$@"} + libtool_parse_options_result=$func_quote_for_eval_result +} +func_add_hook func_parse_options libtool_parse_options - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" - fi - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - # Only execute mode is allowed to have -dlopen flags. - if test -n "$opt_dlopen" && test "$opt_mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE +# libtool_validate_options [ARG]... +# --------------------------------- +# Perform any sanity checks on option settings and/or unconsumed +# arguments. +libtool_validate_options () +{ + # save first non-option argument + if test 0 -lt $#; then + nonopt=$1 + shift fi - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$opt_mode' for more information." - } + # preserve --debug + test : = "$debug_cmd" || func_append preserve_args " --debug" + + case $host in + # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 + # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 + *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + $opt_help || { + # Sanity checks first: + func_check_version_match + + test yes != "$build_libtool_libs" \ + && test yes != "$build_old_libs" \ + && func_fatal_configuration "not configured to build any kind of library" + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test execute != "$opt_mode"; then + func_error "unrecognized option '-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help=$help + help="Try '$progname --help --mode=$opt_mode' for more information." + } - # Bail if the options were screwed - $exit_cmd $EXIT_FAILURE + # Pass back the unparsed argument list + func_quote_for_eval ${1+"$@"} + libtool_validate_options_result=$func_quote_for_eval_result } +func_add_hook func_validate_options libtool_validate_options + +# Process options as early as possible so that --help and --version +# can return quickly. +func_options ${1+"$@"} +eval set dummy "$func_options_result"; shift @@ -1224,24 +2468,52 @@ ## Main. ## ## ----------- ## +magic='%%%MAGIC variable%%%' +magic_exe='%%%MAGIC EXE variable%%%' + +# Global variables. +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# func_generated_by_libtool +# True iff stdin has been generated by Libtool. This function is only +# a basic sanity check; it will hardly flush out determined imposters. +func_generated_by_libtool_p () +{ + $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + # func_lalib_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. +# True iff FILE is a libtool '.la' library or '.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && - $SED -e 4q "$1" 2>/dev/null \ - | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 + $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p } # func_lalib_unsafe_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. +# True iff FILE is a libtool '.la' library or '.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be -# fatal anyway. Works if `file' does not exist. +# fatal anyway. Works if 'file' does not exist. func_lalib_unsafe_p () { lalib_p=no @@ -1249,13 +2521,13 @@ for lalib_p_l in 1 2 3 4 do read lalib_p_line - case "$lalib_p_line" in + case $lalib_p_line in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi - test "$lalib_p" = yes + test yes = "$lalib_p" } # func_ltwrapper_script_p file @@ -1264,7 +2536,8 @@ # determined imposters. func_ltwrapper_script_p () { - func_lalib_p "$1" + test -f "$1" && + $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p } # func_ltwrapper_executable_p file @@ -1289,7 +2562,7 @@ { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper } # func_ltwrapper_p file @@ -1308,11 +2581,13 @@ # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { - $opt_debug + $debug_cmd + save_ifs=$IFS; IFS='~' for cmd in $1; do - IFS=$save_ifs + IFS=$sp$nl eval cmd=\"$cmd\" + IFS=$save_ifs func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs @@ -1324,10 +2599,11 @@ # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing -# `FILE.' does not work on cygwin managed mounts. +# 'FILE.' does not work on cygwin managed mounts. func_source () { - $opt_debug + $debug_cmd + case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; @@ -1354,10 +2630,10 @@ # store the result into func_replace_sysroot_result. func_replace_sysroot () { - case "$lt_sysroot:$1" in + case $lt_sysroot:$1 in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" - func_replace_sysroot_result="=$func_stripname_result" + func_replace_sysroot_result='='$func_stripname_result ;; *) # Including no sysroot. @@ -1374,7 +2650,8 @@ # arg is usually of the form 'gcc ...' func_infer_tag () { - $opt_debug + $debug_cmd + if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do @@ -1393,7 +2670,7 @@ for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. @@ -1418,7 +2695,7 @@ # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with \`--tag'" + func_fatal_error "specify a tag with '--tag'" # else # func_verbose "using $tagname tagged configuration" fi @@ -1434,15 +2711,15 @@ # but don't create it if we're doing a dry run. func_write_libtool_object () { - write_libobj=${1} - if test "$build_libtool_libs" = yes; then - write_lobj=\'${2}\' + write_libobj=$1 + if test yes = "$build_libtool_libs"; then + write_lobj=\'$2\' else write_lobj=none fi - if test "$build_old_libs" = yes; then - write_oldobj=\'${3}\' + if test yes = "$build_old_libs"; then + write_oldobj=\'$3\' else write_oldobj=none fi @@ -1450,7 +2727,7 @@ $opt_dry_run || { cat >${write_libobj}T </dev/null` - if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | - $SED -e "$lt_sed_naive_backslashify"` + $SED -e "$sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi @@ -1514,18 +2792,19 @@ # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { - $opt_debug + $debug_cmd + # unfortunately, winepath doesn't convert paths, only file names - func_convert_core_path_wine_to_w32_result="" + func_convert_core_path_wine_to_w32_result= if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" - if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -n "$func_convert_core_file_wine_to_w32_result"; then if test -z "$func_convert_core_path_wine_to_w32_result"; then - func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi @@ -1554,7 +2833,8 @@ # environment variable; do not put it in $PATH. func_cygpath () { - $opt_debug + $debug_cmd + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then @@ -1563,7 +2843,7 @@ fi else func_cygpath_result= - func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" fi } #end: func_cygpath @@ -1574,10 +2854,11 @@ # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { - $opt_debug + $debug_cmd + # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | - $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` + $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 @@ -1588,13 +2869,14 @@ # func_to_host_file_result to ARG1). func_convert_file_check () { - $opt_debug - if test -z "$2" && test -n "$1" ; then + $debug_cmd + + if test -z "$2" && test -n "$1"; then func_error "Could not determine host file name corresponding to" - func_error " \`$1'" + func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: - func_to_host_file_result="$1" + func_to_host_file_result=$1 fi } # end func_convert_file_check @@ -1606,10 +2888,11 @@ # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { - $opt_debug + $debug_cmd + if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" - func_error " \`$3'" + func_error " '$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. @@ -1618,7 +2901,7 @@ func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else - func_to_host_path_result="$3" + func_to_host_path_result=$3 fi fi } @@ -1630,9 +2913,10 @@ # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { - $opt_debug + $debug_cmd + case $4 in - $1 ) func_to_host_path_result="$3$func_to_host_path_result" + $1 ) func_to_host_path_result=$3$func_to_host_path_result ;; esac case $4 in @@ -1646,7 +2930,7 @@ ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## -# invoked via `$to_host_file_cmd ARG' +# invoked via '$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. @@ -1657,7 +2941,8 @@ # in func_to_host_file_result. func_to_host_file () { - $opt_debug + $debug_cmd + $to_host_file_cmd "$1" } # end func_to_host_file @@ -1669,7 +2954,8 @@ # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { - $opt_debug + $debug_cmd + case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 @@ -1687,7 +2973,7 @@ # Copy ARG to func_to_host_file_result. func_convert_file_noop () { - func_to_host_file_result="$1" + func_to_host_file_result=$1 } # end func_convert_file_noop @@ -1698,11 +2984,12 @@ # func_to_host_file_result. func_convert_file_msys_to_w32 () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" - func_to_host_file_result="$func_convert_core_msys_to_w32_result" + func_to_host_file_result=$func_convert_core_msys_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1714,8 +3001,9 @@ # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. @@ -1731,11 +3019,12 @@ # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" - func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result=$func_convert_core_file_wine_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1747,12 +3036,13 @@ # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" - func_to_host_file_result="$func_cygpath_result" + func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1765,13 +3055,14 @@ # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" - func_to_host_file_result="$func_cygpath_result" + func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1781,7 +3072,7 @@ ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# -# invoked via `$to_host_path_cmd ARG' +# invoked via '$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. @@ -1805,10 +3096,11 @@ to_host_path_cmd= func_init_to_host_path_cmd () { - $opt_debug + $debug_cmd + if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" - to_host_path_cmd="func_convert_path_${func_stripname_result}" + to_host_path_cmd=func_convert_path_$func_stripname_result fi } @@ -1818,7 +3110,8 @@ # in func_to_host_path_result. func_to_host_path () { - $opt_debug + $debug_cmd + func_init_to_host_path_cmd $to_host_path_cmd "$1" } @@ -1829,7 +3122,7 @@ # Copy ARG to func_to_host_path_result. func_convert_path_noop () { - func_to_host_path_result="$1" + func_to_host_path_result=$1 } # end func_convert_path_noop @@ -1840,8 +3133,9 @@ # func_to_host_path_result. func_convert_path_msys_to_w32 () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; @@ -1849,7 +3143,7 @@ func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_to_host_path_result=$func_convert_core_msys_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" @@ -1863,8 +3157,9 @@ # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" @@ -1883,14 +3178,15 @@ # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result=$func_convert_core_path_wine_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" @@ -1904,15 +3200,16 @@ # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" - func_to_host_path_result="$func_cygpath_result" + func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" @@ -1927,8 +3224,9 @@ # func_to_host_file_result. func_convert_path_nix_to_cygwin () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them @@ -1937,7 +3235,7 @@ func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" - func_to_host_path_result="$func_cygpath_result" + func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" @@ -1946,13 +3244,31 @@ # end func_convert_path_nix_to_cygwin +# func_dll_def_p FILE +# True iff FILE is a Windows DLL '.def' file. +# Keep in sync with _LT_DLL_DEF_P in libtool.m4 +func_dll_def_p () +{ + $debug_cmd + + func_dll_def_p_tmp=`$SED -n \ + -e 's/^[ ]*//' \ + -e '/^\(;.*\)*$/d' \ + -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ + -e q \ + "$1"` + test DEF = "$func_dll_def_p_tmp" +} + + # func_mode_compile arg... func_mode_compile () { - $opt_debug + $debug_cmd + # Get the compilation command and the source file. base_compile= - srcfile="$nonopt" # always keep a non-empty value in "srcfile" + srcfile=$nonopt # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal @@ -1965,12 +3281,12 @@ case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile - lastarg="$arg" + lastarg=$arg arg_mode=normal ;; target ) - libobj="$arg" + libobj=$arg arg_mode=normal continue ;; @@ -1980,7 +3296,7 @@ case $arg in -o) test -n "$libobj" && \ - func_fatal_error "you cannot specify \`-o' more than once" + func_fatal_error "you cannot specify '-o' more than once" arg_mode=target continue ;; @@ -2009,12 +3325,12 @@ func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= - save_ifs="$IFS"; IFS=',' + save_ifs=$IFS; IFS=, for arg in $args; do - IFS="$save_ifs" + IFS=$save_ifs func_append_quoted lastarg "$arg" done - IFS="$save_ifs" + IFS=$save_ifs func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result @@ -2027,8 +3343,8 @@ # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # - lastarg="$srcfile" - srcfile="$arg" + lastarg=$srcfile + srcfile=$arg ;; esac # case $arg ;; @@ -2043,13 +3359,13 @@ func_fatal_error "you must specify an argument for -Xcompile" ;; target) - func_fatal_error "you must specify a target with \`-o'" + func_fatal_error "you must specify a target with '-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" - libobj="$func_basename_result" + libobj=$func_basename_result } ;; esac @@ -2069,7 +3385,7 @@ case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) - func_fatal_error "cannot determine name of library object from \`$libobj'" + func_fatal_error "cannot determine name of library object from '$libobj'" ;; esac @@ -2078,8 +3394,8 @@ for arg in $later; do case $arg in -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" + test yes = "$build_libtool_libs" \ + || func_fatal_configuration "cannot build a shared library" build_old_libs=no continue ;; @@ -2105,17 +3421,17 @@ func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && func_warning "libobj name \`$libobj' may not contain shell special characters." + && func_warning "libobj name '$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" - objname="$func_basename_result" - xdir="$func_dirname_result" - lobj=${xdir}$objdir/$objname + objname=$func_basename_result + xdir=$func_dirname_result + lobj=$xdir$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. - if test "$build_old_libs" = yes; then + if test yes = "$build_old_libs"; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" @@ -2127,16 +3443,16 @@ pic_mode=default ;; esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" + if test no = "$compiler_c_o"; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext + lockfile=$output_obj.lock else output_obj= need_locks=no @@ -2145,12 +3461,12 @@ # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then + if test yes = "$need_locks"; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done - elif test "$need_locks" = warn; then + elif test warn = "$need_locks"; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: @@ -2158,7 +3474,7 @@ This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you +your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." @@ -2180,11 +3496,11 @@ qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile - if test "$pic_mode" != no; then + if test no != "$pic_mode"; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code @@ -2201,7 +3517,7 @@ func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - if test "$need_locks" = warn && + if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: @@ -2212,7 +3528,7 @@ This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you +your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." @@ -2228,20 +3544,20 @@ fi # Allow error messages only from the first compilation. - if test "$suppress_opt" = yes; then + if test yes = "$suppress_opt"; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - if test "$pic_mode" != yes; then + if test yes = "$build_old_libs"; then + if test yes != "$pic_mode"; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi - if test "$compiler_c_o" = yes; then + if test yes = "$compiler_c_o"; then func_append command " -o $obj" fi @@ -2250,7 +3566,7 @@ func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - if test "$need_locks" = warn && + if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: @@ -2261,7 +3577,7 @@ This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you +your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." @@ -2281,7 +3597,7 @@ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked - if test "$need_locks" != no; then + if test no != "$need_locks"; then removelist=$lockfile $RM "$lockfile" fi @@ -2291,7 +3607,7 @@ } $opt_help || { - test "$opt_mode" = compile && func_mode_compile ${1+"$@"} + test compile = "$opt_mode" && func_mode_compile ${1+"$@"} } func_mode_help () @@ -2311,7 +3627,7 @@ Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated @@ -2330,16 +3646,16 @@ -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only - -shared do not build a \`.o' file suitable for static linking - -static only build a \`.o' file suitable for static linking + -shared do not build a '.o' file suitable for static linking + -static only build a '.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler -COMPILE-COMMAND is a command to be used in creating a \`standard' object file +COMPILE-COMMAND is a command to be used in creating a 'standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." +SOURCEFILE, then substituting the C source code suffix '.c' with the +library object suffix, '.lo'." ;; execute) @@ -2352,7 +3668,7 @@ -dlopen FILE add the directory containing FILE to the library path -This mode sets the library path environment variable according to \`-dlopen' +This mode sets the library path environment variable according to '-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated @@ -2371,7 +3687,7 @@ Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." +the '--dry-run' option if you just want to see what would be executed." ;; install) @@ -2381,7 +3697,7 @@ Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. +either the 'install' or 'cp' program. The following components of INSTALL-COMMAND are treated specially: @@ -2407,7 +3723,7 @@ -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE @@ -2421,7 +3737,8 @@ -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects + -objectlist FILE use a list of object files found in FILE to specify objects + -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information @@ -2441,20 +3758,20 @@ -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) -All other options (arguments beginning with \`-') are ignored. +All other options (arguments beginning with '-') are ignored. -Every other argument is treated as a filename. Files ending in \`.la' are +Every other argument is treated as a filename. Files ending in '.la' are treated as uninstalled libtool libraries, other files are standard or library object files. -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is +If the OUTPUT-FILE ends in '.la', then a libtool library is created, +only library objects ('.lo' files) may be specified, and '-rpath' is required, except when creating a convenience library. -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. +If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created +using 'ar' and 'ranlib', or on Windows using 'lib'. -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file is created, otherwise an executable program is created." ;; @@ -2465,7 +3782,7 @@ Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. @@ -2473,17 +3790,17 @@ ;; *) - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode '$opt_mode'" ;; esac echo - $ECHO "Try \`$progname --help' for more information about other modes." + $ECHO "Try '$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then - if test "$opt_help" = :; then + if test : = "$opt_help"; then func_mode_help else { @@ -2491,7 +3808,7 @@ for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done - } | sed -n '1p; 2,$s/^Usage:/ or: /p' + } | $SED -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do @@ -2499,7 +3816,7 @@ func_mode_help done } | - sed '1d + $SED '1d /^When reporting/,/^Report/{ H d @@ -2516,16 +3833,17 @@ # func_mode_execute arg... func_mode_execute () { - $opt_debug + $debug_cmd + # The first argument is the command name. - cmd="$nonopt" + cmd=$nonopt test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ - || func_fatal_help "\`$file' is not a file" + || func_fatal_help "'$file' is not a file" dir= case $file in @@ -2535,7 +3853,7 @@ # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$lib' is not a valid libtool archive" + || func_fatal_help "'$lib' is not a valid libtool archive" # Read the libtool library. dlname= @@ -2546,18 +3864,18 @@ if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ - func_warning "\`$file' was not linked with \`-export-dynamic'" + func_warning "'$file' was not linked with '-export-dynamic'" continue fi func_dirname "$file" "" "." - dir="$func_dirname_result" + dir=$func_dirname_result if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" fi fi ;; @@ -2565,18 +3883,18 @@ *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." - dir="$func_dirname_result" + dir=$func_dirname_result ;; *) - func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + func_warning "'-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" + test -n "$absdir" && dir=$absdir # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then @@ -2588,7 +3906,7 @@ # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. - libtool_execute_magic="$magic" + libtool_execute_magic=$magic # Check if any of the arguments is a wrapper script. args= @@ -2601,12 +3919,12 @@ if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. - file="$progdir/$program" + file=$progdir/$program elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. - file="$progdir/$program" + file=$progdir/$program fi ;; esac @@ -2614,7 +3932,15 @@ func_append_quoted args "$file" done - if test "X$opt_dry_run" = Xfalse; then + if $opt_dry_run; then + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + else if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" @@ -2631,25 +3957,18 @@ done # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - echo "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS + exec_cmd=\$cmd$args fi } -test "$opt_mode" = execute && func_mode_execute ${1+"$@"} +test execute = "$opt_mode" && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { - $opt_debug + $debug_cmd + libs= libdirs= admincmds= @@ -2663,11 +3982,11 @@ if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else - func_warning "\`$opt' is not a valid libtool archive" + func_warning "'$opt' is not a valid libtool archive" fi else - func_fatal_error "invalid argument \`$opt'" + func_fatal_error "invalid argument '$opt'" fi done @@ -2682,12 +4001,12 @@ # Remove sysroot references if $opt_dry_run; then for lib in $libs; do - echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + echo "removing references to $lt_sysroot and '=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do - sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done @@ -2712,7 +4031,7 @@ fi # Exit here if they wanted silent mode. - $opt_silent && exit $EXIT_SUCCESS + $opt_quiet && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" @@ -2723,27 +4042,27 @@ echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "specify the full pathname of the library, or use the '-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " - add LIBDIR to the '$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " - add LIBDIR to the '$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" - $ECHO " - use the \`$flag' linker flag" + $ECHO " - use the '$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" fi echo @@ -2762,18 +4081,20 @@ exit $EXIT_SUCCESS } -test "$opt_mode" = finish && func_mode_finish ${1+"$@"} +test finish = "$opt_mode" && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { - $opt_debug + $debug_cmd + # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || # Allow the use of GNU shtool's install command. - case $nonopt in *shtool*) :;; *) false;; esac; then + case $nonopt in *shtool*) :;; *) false;; esac + then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " @@ -2800,7 +4121,7 @@ opts= prev= install_type= - isdir=no + isdir=false stripme= no_mode=: for arg @@ -2813,7 +4134,7 @@ fi case $arg in - -d) isdir=yes ;; + -d) isdir=: ;; -f) if $install_cp; then :; else prev=$arg @@ -2831,7 +4152,7 @@ *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then - if test "x$prev" = x-m && test -n "$install_override_mode"; then + if test X-m = "X$prev" && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi @@ -2856,7 +4177,7 @@ func_fatal_help "you must specify an install program" test -n "$prev" && \ - func_fatal_help "the \`$prev' option requires an argument" + func_fatal_help "the '$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else @@ -2878,19 +4199,19 @@ dest=$func_stripname_result # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" + test -d "$dest" && isdir=: + if $isdir; then + destdir=$dest destname= else func_dirname_and_basename "$dest" "" "." - destdir="$func_dirname_result" - destname="$func_basename_result" + destdir=$func_dirname_result + destname=$func_basename_result # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ - func_fatal_help "\`$dest' is not a directory" + func_fatal_help "'$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; @@ -2899,7 +4220,7 @@ case $file in *.lo) ;; *) - func_fatal_help "\`$destdir' must be an absolute directory name" + func_fatal_help "'$destdir' must be an absolute directory name" ;; esac done @@ -2908,7 +4229,7 @@ # This variable tells wrapper scripts just to set variables rather # than running their programs. - libtool_install_magic="$magic" + libtool_install_magic=$magic staticlibs= future_libdirs= @@ -2928,7 +4249,7 @@ # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$file' is not a valid libtool archive" + || func_fatal_help "'$file' is not a valid libtool archive" library_names= old_library= @@ -2950,7 +4271,7 @@ fi func_dirname "$file" "/" "" - dir="$func_dirname_result" + dir=$func_dirname_result func_append dir "$objdir" if test -n "$relink_command"; then @@ -2964,7 +4285,7 @@ # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. @@ -2973,29 +4294,36 @@ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi - func_warning "relinking \`$file'" + func_warning "relinking '$file'" func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then - realname="$1" + realname=$1 shift - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T + srcname=$realname + test -n "$relink_command" && srcname=${realname}T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' - tstripme="$stripme" + tstripme=$stripme case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) - tstripme="" + tstripme= + ;; + esac + ;; + os2*) + case $realname in + *_dll.a) + tstripme= ;; esac ;; @@ -3006,7 +4334,7 @@ if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on + # Try 'ln -sf' first, because the 'ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname @@ -3017,14 +4345,14 @@ fi # Do each command in the postinstall commands. - lib="$destdir/$realname" + lib=$destdir/$realname func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" - name="$func_basename_result" - instname="$dir/$name"i + name=$func_basename_result + instname=$dir/${name}i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. @@ -3036,11 +4364,11 @@ # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then - destfile="$destdir/$destname" + destfile=$destdir/$destname else func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" + destfile=$func_basename_result + destfile=$destdir/$destfile fi # Deduce the name of the destination old-style object file. @@ -3050,11 +4378,11 @@ staticdest=$func_lo2o_result ;; *.$objext) - staticdest="$destfile" + staticdest=$destfile destfile= ;; *) - func_fatal_help "cannot copy a libtool object to \`$destfile'" + func_fatal_help "cannot copy a libtool object to '$destfile'" ;; esac @@ -3063,7 +4391,7 @@ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. - if test "$build_old_libs" = yes; then + if test yes = "$build_old_libs"; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result @@ -3075,23 +4403,23 @@ *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then - destfile="$destdir/$destname" + destfile=$destdir/$destname else func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" + destfile=$func_basename_result + destfile=$destdir/$destfile fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install - stripped_ext="" + stripped_ext= case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result - stripped_ext=".exe" + stripped_ext=.exe fi ;; esac @@ -3119,19 +4447,19 @@ # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script \`$wrapper'" + func_fatal_error "invalid libtool wrapper script '$wrapper'" - finalize=yes + finalize=: for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi - libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "\`$lib' has not been installed in \`$libdir'" - finalize=no + func_warning "'$lib' has not been installed in '$libdir'" + finalize=false fi done @@ -3139,29 +4467,29 @@ func_source "$wrapper" outputname= - if test "$fast_install" = no && test -n "$relink_command"; then + if test no = "$fast_install" && test -n "$relink_command"; then $opt_dry_run || { - if test "$finalize" = yes; then + if $finalize; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" - file="$func_basename_result" - outputname="$tmpdir/$file" + file=$func_basename_result + outputname=$tmpdir/$file # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` - $opt_silent || { + $opt_quiet || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else - func_error "error: relink \`$file' with the above command before installing it" + func_error "error: relink '$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi - file="$outputname" + file=$outputname else - func_warning "cannot relink \`$file'" + func_warning "cannot relink '$file'" fi } else @@ -3198,10 +4526,10 @@ for file in $staticlibs; do func_basename "$file" - name="$func_basename_result" + name=$func_basename_result # Set up the ranlib parameters. - oldlib="$destdir/$name" + oldlib=$destdir/$name func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result @@ -3216,18 +4544,18 @@ done test -n "$future_libdirs" && \ - func_warning "remember to run \`$progname --finish$future_libdirs'" + func_warning "remember to run '$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } -test "$opt_mode" = install && func_mode_install ${1+"$@"} +test install = "$opt_mode" && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p @@ -3235,16 +4563,17 @@ # a dlpreopen symbol table. func_generate_dlsyms () { - $opt_debug - my_outputname="$1" - my_originator="$2" - my_pic_p="${3-no}" - my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + $debug_cmd + + my_outputname=$1 + my_originator=$2 + my_pic_p=${3-false} + my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms="${my_outputname}S.c" + my_dlsyms=${my_outputname}S.c else func_error "not configured to extract global symbols from dlpreopened files" fi @@ -3255,7 +4584,7 @@ "") ;; *.c) # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${my_outputname}.nm" + nlist=$output_objdir/$my_outputname.nm func_show_eval "$RM $nlist ${nlist}S ${nlist}T" @@ -3263,34 +4592,36 @@ func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ +/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif -#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST -#elif defined(__osf__) +#elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif +#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) + /* External symbol declarations for the compiler. */\ " - if test "$dlself" = yes; then - func_verbose "generating symbol list for \`$output'" + if test yes = "$dlself"; then + func_verbose "generating symbol list for '$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" @@ -3298,7 +4629,7 @@ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 - func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + func_verbose "extracting global C symbols from '$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done @@ -3318,10 +4649,10 @@ # Prepare the list of exported symbols if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" + export_symbols=$output_objdir/$outputname.exp $opt_dry_run || { $RM $export_symbols - eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' @@ -3331,7 +4662,7 @@ } else $opt_dry_run || { - eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in @@ -3345,22 +4676,22 @@ fi for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from \`$dlprefile'" + func_verbose "extracting global C symbols from '$dlprefile'" func_basename "$dlprefile" - name="$func_basename_result" + name=$func_basename_result case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" - dlprefile_dlbasename="" + dlprefile_dlbasename= if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` - if test -n "$dlprefile_dlname" ; then + if test -n "$dlprefile_dlname"; then func_basename "$dlprefile_dlname" - dlprefile_dlbasename="$func_basename_result" + dlprefile_dlbasename=$func_basename_result else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" @@ -3368,7 +4699,7 @@ fi fi $opt_dry_run || { - if test -n "$dlprefile_dlbasename" ; then + if test -n "$dlprefile_dlbasename"; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" @@ -3424,6 +4755,11 @@ echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi + func_show_eval '$RM "${nlist}I"' + if test -n "$global_symbol_to_import"; then + eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' + fi + echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ @@ -3432,11 +4768,30 @@ void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[]; +lt_${my_prefix}_LTX_preloaded_symbols[];\ +" + + if test -s "$nlist"I; then + echo >> "$output_objdir/$my_dlsyms" "\ +static void lt_syminit(void) +{ + LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; + for (; symbol->name; ++symbol) + {" + $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" + echo >> "$output_objdir/$my_dlsyms" "\ + } +}" + fi + echo >> "$output_objdir/$my_dlsyms" "\ LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = -{\ - { \"$my_originator\", (void *) 0 }," +{ {\"$my_originator\", (void *) 0}," + + if test -s "$nlist"I; then + echo >> "$output_objdir/$my_dlsyms" "\ + {\"@INIT@\", (void *) <_syminit}," + fi case $need_lib_prefix in no) @@ -3478,9 +4833,7 @@ *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) - if test "X$my_pic_p" != Xno; then - pic_flag_for_symtable=" $pic_flag" - fi + $my_pic_p && pic_flag_for_symtable=" $pic_flag" ;; esac ;; @@ -3497,10 +4850,10 @@ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' # Transform the symbol file into the correct name. - symfileobj="$output_objdir/${my_outputname}S.$objext" + symfileobj=$output_objdir/${my_outputname}S.$objext case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then @@ -3518,7 +4871,7 @@ esac ;; *) - func_fatal_error "unknown suffix for \`$my_dlsyms'" + func_fatal_error "unknown suffix for '$my_dlsyms'" ;; esac else @@ -3532,6 +4885,32 @@ fi } +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $debug_cmd + + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $debug_cmd + + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + # func_win32_libid arg # return the library type of file 'arg' # @@ -3541,8 +4920,9 @@ # Despite the name, also deal with 64 bit binaries. func_win32_libid () { - $opt_debug - win32_libid_type="unknown" + $debug_cmd + + win32_libid_type=unknown win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import @@ -3552,16 +4932,29 @@ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then - func_to_tool_file "$1" func_convert_file_msys_to_w32 - win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | - $SED -n -e ' + case $nm_interface in + "MS dumpbin") + if func_cygming_ms_implib_p "$1" || + func_cygming_gnu_implib_p "$1" + then + win32_nmres=import + else + win32_nmres= + fi + ;; + *) + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' 1,100{ / I /{ - s,.*,import, + s|.*|import| p q } }'` + ;; + esac case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; @@ -3593,7 +4986,8 @@ # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { - $opt_debug + $debug_cmd + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } @@ -3610,7 +5004,8 @@ # specified import library. func_cygming_dll_for_implib_fallback_core () { - $opt_debug + $debug_cmd + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ @@ -3646,8 +5041,8 @@ /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the - # archive which possess that section. Heuristic: eliminate - # all those which have a first or second character that is + # archive that possess that section. Heuristic: eliminate + # all those that have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually @@ -3658,30 +5053,6 @@ $SED -e '/^\./d;/^.\./d;q' } -# func_cygming_gnu_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is a GNU/binutils-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_gnu_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` - test -n "$func_cygming_gnu_implib_tmp" -} - -# func_cygming_ms_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is an MS-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_ms_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` - test -n "$func_cygming_ms_implib_tmp" -} - # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified @@ -3695,16 +5066,17 @@ # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { - $opt_debug - if func_cygming_gnu_implib_p "$1" ; then + $debug_cmd + + if func_cygming_gnu_implib_p "$1"; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` - elif func_cygming_ms_implib_p "$1" ; then + elif func_cygming_ms_implib_p "$1"; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown - sharedlib_from_linklib_result="" + sharedlib_from_linklib_result= fi } @@ -3712,10 +5084,11 @@ # func_extract_an_archive dir oldlib func_extract_an_archive () { - $opt_debug - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" - if test "$lock_old_archive_extraction" = yes; then + $debug_cmd + + f_ex_an_ar_dir=$1; shift + f_ex_an_ar_oldlib=$1 + if test yes = "$lock_old_archive_extraction"; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" @@ -3724,7 +5097,7 @@ fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' - if test "$lock_old_archive_extraction" = yes; then + if test yes = "$lock_old_archive_extraction"; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then @@ -3738,22 +5111,23 @@ # func_extract_archives gentop oldlib ... func_extract_archives () { - $opt_debug - my_gentop="$1"; shift + $debug_cmd + + my_gentop=$1; shift my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" + my_oldobjs= + my_xlib= + my_xabs= + my_xdir= for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" - my_xlib="$func_basename_result" + my_xlib=$func_basename_result my_xlib_u=$my_xlib while :; do case " $extracted_archives " in @@ -3765,7 +5139,7 @@ esac done extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" + my_xdir=$my_gentop/$my_xlib_u func_mkdir_p "$my_xdir" @@ -3778,22 +5152,23 @@ cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` - darwin_base_archive=`basename "$darwin_archive"` + func_basename "$darwin_archive" + darwin_base_archive=$func_basename_result darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" + for darwin_arch in $darwin_arches; do + func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" + $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" + cd "unfat-$$/$darwin_base_archive-$darwin_arch" + func_extract_an_archive "`pwd`" "$darwin_base_archive" cd "$darwin_curdir" - $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do @@ -3815,7 +5190,7 @@ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done - func_extract_archives_result="$my_oldobjs" + func_extract_archives_result=$my_oldobjs } @@ -3830,7 +5205,7 @@ # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is +# will assume that the directory where it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () @@ -3841,7 +5216,7 @@ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. @@ -3898,9 +5273,9 @@ # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper -# /script/ and the wrapper /executable/ which is used only on +# /script/ and the wrapper /executable/ that is used only on # windows platforms, and (c) all begin with the string "--lt-" -# (application programs are unlikely to have options which match +# (application programs are unlikely to have options that match # this pattern). # # There are only two supported options: --lt-debug and @@ -3933,7 +5308,7 @@ # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then - echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 fi } @@ -3944,7 +5319,7 @@ lt_dump_args_N=1; for lt_arg do - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } @@ -3958,7 +5333,7 @@ *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} @@ -3968,7 +5343,7 @@ *) $ECHO "\ if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} @@ -4043,13 +5418,13 @@ test -n \"\$absdir\" && thisdir=\"\$absdir\" " - if test "$fast_install" = yes; then + if test yes = "$fast_install"; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" @@ -4066,7 +5441,7 @@ if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else - $ECHO \"\$relink_command_output\" >&2 + \$ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi @@ -4101,7 +5476,7 @@ fi # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" @@ -4121,7 +5496,7 @@ fi else # The program doesn't exist. - \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 @@ -4140,7 +5515,7 @@ cat < #include +#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) + /* declarations of non-ANSI functions */ -#if defined(__MINGW32__) +#if defined __MINGW32__ # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif -#elif defined(__CYGWIN__) +#elif defined __CYGWIN__ # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif -/* #elif defined (other platforms) ... */ +/* #elif defined other_platform || defined ... */ #endif /* portability defines, excluding path handling macros */ -#if defined(_MSC_VER) +#if defined _MSC_VER # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC -# ifndef _INTPTR_T_DEFINED -# define _INTPTR_T_DEFINED -# define intptr_t int -# endif -#elif defined(__MINGW32__) +#elif defined __MINGW32__ # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv -#elif defined(__CYGWIN__) +#elif defined __CYGWIN__ # define HAVE_SETENV # define FOPEN_WB "wb" -/* #elif defined (other platforms) ... */ +/* #elif defined other platforms ... */ #endif -#if defined(PATH_MAX) +#if defined PATH_MAX # define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) +#elif defined MAXPATHLEN # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 @@ -4234,8 +5607,8 @@ # define PATH_SEPARATOR ':' #endif -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) +#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ + defined __OS2__ # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 @@ -4268,10 +5641,10 @@ #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ + if (stale) { free (stale); stale = 0; } \ } while (0) -#if defined(LT_DEBUGWRAPPER) +#if defined LT_DEBUGWRAPPER static int lt_debug = 1; #else static int lt_debug = 0; @@ -4300,11 +5673,16 @@ EOF cat < 0) && IS_PATH_SEPARATOR (new_value[len-1])) + size_t len = strlen (new_value); + while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { - new_value[len-1] = '\0'; + new_value[--len] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); @@ -5082,27 +6460,47 @@ # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { - $opt_debug + $debug_cmd + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } +# func_suncc_cstd_abi +# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! +# Several compiler flags select an ABI that is incompatible with the +# Cstd library. Avoid specifying it if any are in CXXFLAGS. +func_suncc_cstd_abi () +{ + $debug_cmd + + case " $compile_command " in + *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) + suncc_use_cstd_abi=no + ;; + *) + suncc_use_cstd_abi=yes + ;; + esac +} + # func_mode_link arg... func_mode_link () { - $opt_debug + $debug_cmd + case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra + # what system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not + # to make a dll that has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. @@ -5146,10 +6544,11 @@ module=no no_install=no objs= + os2dllname= non_pic_objects= precious_files_regex= prefer_static_libs=no - preload=no + preload=false prev= prevarg= release= @@ -5161,7 +6560,7 @@ vinfo= vinfo_number=no weak_libs= - single_module="${wl}-single_module" + single_module=$wl-single_module func_infer_tag $base_compile # We need to know -static, to get the right output filenames. @@ -5169,15 +6568,15 @@ do case $arg in -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" + test yes != "$build_libtool_libs" \ + && func_fatal_configuration "cannot build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) - if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then @@ -5210,7 +6609,7 @@ # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do - arg="$1" + arg=$1 shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result @@ -5227,21 +6626,21 @@ case $prev in bindir) - bindir="$arg" + bindir=$arg prev= continue ;; dlfiles|dlprefiles) - if test "$preload" = no; then + $preload || { # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" - preload=yes - fi + preload=: + } case $arg in *.la | *.lo) ;; # We handle these cases below. force) - if test "$dlself" = no; then + if test no = "$dlself"; then dlself=needless export_dynamic=yes fi @@ -5249,9 +6648,9 @@ continue ;; self) - if test "$prev" = dlprefiles; then + if test dlprefiles = "$prev"; then dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then dlself=yes else dlself=needless @@ -5261,7 +6660,7 @@ continue ;; *) - if test "$prev" = dlfiles; then + if test dlfiles = "$prev"; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" @@ -5272,14 +6671,14 @@ esac ;; expsyms) - export_symbols="$arg" + export_symbols=$arg test -f "$arg" \ - || func_fatal_error "symbol file \`$arg' does not exist" + || func_fatal_error "symbol file '$arg' does not exist" prev= continue ;; expsyms_regex) - export_symbols_regex="$arg" + export_symbols_regex=$arg prev= continue ;; @@ -5297,7 +6696,13 @@ continue ;; inst_prefix) - inst_prefix_dir="$arg" + inst_prefix_dir=$arg + prev= + continue + ;; + mllvm) + # Clang does not use LLVM to link, so we can simply discard any + # '-mllvm $arg' options when doing the link step. prev= continue ;; @@ -5321,21 +6726,21 @@ if test -z "$pic_object" || test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" + test none = "$pic_object" && + test none = "$non_pic_object"; then + func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result - if test "$pic_object" != none; then + if test none != "$pic_object"; then # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" + pic_object=$xdir$pic_object - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + if test dlfiles = "$prev"; then + if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue @@ -5346,7 +6751,7 @@ fi # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then + if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= @@ -5354,23 +6759,23 @@ # A PIC object. func_append libobjs " $pic_object" - arg="$pic_object" + arg=$pic_object fi # Non-PIC object. - if test "$non_pic_object" != none; then + if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" + non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" + if test -z "$pic_object" || test none = "$pic_object"; then + arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" + non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else @@ -5378,7 +6783,7 @@ if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result @@ -5386,24 +6791,29 @@ func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else - func_fatal_error "\`$arg' is not a valid libtool object" + func_fatal_error "'$arg' is not a valid libtool object" fi fi done else - func_fatal_error "link input file \`$arg' does not exist" + func_fatal_error "link input file '$arg' does not exist" fi arg=$save_arg prev= continue ;; + os2dllname) + os2dllname=$arg + prev= + continue + ;; precious_regex) - precious_files_regex="$arg" + precious_files_regex=$arg prev= continue ;; release) - release="-$arg" + release=-$arg prev= continue ;; @@ -5415,7 +6825,7 @@ func_fatal_error "only absolute run-paths are allowed" ;; esac - if test "$prev" = rpath; then + if test rpath = "$prev"; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; @@ -5430,7 +6840,7 @@ continue ;; shrext) - shrext_cmds="$arg" + shrext_cmds=$arg prev= continue ;; @@ -5470,7 +6880,7 @@ esac fi # test -n "$prev" - prevarg="$arg" + prevarg=$arg case $arg in -all-static) @@ -5484,7 +6894,7 @@ -allow-undefined) # FIXME: remove this flag sometime in the future. - func_fatal_error "\`-allow-undefined' must not be used because it is the default" + func_fatal_error "'-allow-undefined' must not be used because it is the default" ;; -avoid-version) @@ -5516,7 +6926,7 @@ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi - if test "X$arg" = "X-export-symbols"; then + if test X-export-symbols = "X$arg"; then prev=expsyms else prev=expsyms_regex @@ -5550,9 +6960,9 @@ func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then - func_fatal_error "require no space between \`-L' and \`$1'" + func_fatal_error "require no space between '-L' and '$1'" else - func_fatal_error "need path for \`-L' option" + func_fatal_error "need path for '-L' option" fi fi func_resolve_sysroot "$func_stripname_result" @@ -5563,8 +6973,8 @@ *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of \`$dir'" - dir="$absdir" + func_fatal_error "cannot determine absolute directory name of '$dir'" + dir=$absdir ;; esac case "$deplibs " in @@ -5599,7 +7009,7 @@ ;; -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + if test X-lc = "X$arg" || test X-lm = "X$arg"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) @@ -5607,11 +7017,11 @@ ;; *-*-os2*) # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework @@ -5620,16 +7030,16 @@ ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; esac - elif test "X$arg" = "X-lc_r"; then + elif test X-lc_r = "X$arg"; then case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc_r directly, use -pthread flag. continue ;; @@ -5639,6 +7049,11 @@ continue ;; + -mllvm) + prev=mllvm + continue + ;; + -module) module=yes continue @@ -5668,7 +7083,7 @@ ;; -multi_module) - single_module="${wl}-multi_module" + single_module=$wl-multi_module continue ;; @@ -5682,8 +7097,8 @@ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. - func_warning "\`-no-install' is ignored for $host" - func_warning "assuming \`-no-fast-install' instead" + func_warning "'-no-install' is ignored for $host" + func_warning "assuming '-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; @@ -5701,6 +7116,11 @@ continue ;; + -os2dllname) + prev=os2dllname + continue + ;; + -o) prev=output ;; -precious-files-regex) @@ -5788,14 +7208,14 @@ func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= - save_ifs="$IFS"; IFS=',' + save_ifs=$IFS; IFS=, for flag in $args; do - IFS="$save_ifs" + IFS=$save_ifs func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done - IFS="$save_ifs" + IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; @@ -5804,15 +7224,15 @@ func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= - save_ifs="$IFS"; IFS=',' + save_ifs=$IFS; IFS=, for flag in $args; do - IFS="$save_ifs" + IFS=$save_ifs func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done - IFS="$save_ifs" + IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; @@ -5835,7 +7255,7 @@ # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result ;; # Flags to be passed through unchanged, with rationale: @@ -5847,25 +7267,49 @@ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # -fstack-protector* stack protector flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support - # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -specs=* GCC specs files + # -stdlib=* select c++ std lib with clang + # -fsanitize=* Clang/GCC memory and address sanitizer -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \ + -specs=*|-fsanitize=*) func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; + -Z*) + if test os2 = "`expr $host : '.*\(os2\)'`"; then + # OS/2 uses -Zxxx to specify OS/2-specific options + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case $arg in + -Zlinker | -Zstack) + prev=xcompiler + ;; + esac + continue + else + # Otherwise treat like 'Some other compiler flag' below + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + fi + ;; + # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result ;; *.$objext) @@ -5886,21 +7330,21 @@ if test -z "$pic_object" || test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" + test none = "$pic_object" && + test none = "$non_pic_object"; then + func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result - if test "$pic_object" != none; then + test none = "$pic_object" || { # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" + pic_object=$xdir$pic_object - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + if test dlfiles = "$prev"; then + if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue @@ -5911,7 +7355,7 @@ fi # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then + if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= @@ -5919,23 +7363,23 @@ # A PIC object. func_append libobjs " $pic_object" - arg="$pic_object" - fi + arg=$pic_object + } # Non-PIC object. - if test "$non_pic_object" != none; then + if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" + non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" + if test -z "$pic_object" || test none = "$pic_object"; then + arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" + non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else @@ -5943,7 +7387,7 @@ if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result @@ -5951,7 +7395,7 @@ func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else - func_fatal_error "\`$arg' is not a valid libtool object" + func_fatal_error "'$arg' is not a valid libtool object" fi fi ;; @@ -5967,11 +7411,11 @@ # A libtool-controlled library. func_resolve_sysroot "$arg" - if test "$prev" = dlfiles; then + if test dlfiles = "$prev"; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= - elif test "$prev" = dlprefiles; then + elif test dlprefiles = "$prev"; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= @@ -5986,7 +7430,7 @@ # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result ;; esac # arg @@ -5998,9 +7442,9 @@ done # argument parsing loop test -n "$prev" && \ - func_fatal_help "the \`$prevarg' option requires an argument" + func_fatal_help "the '$prevarg' option requires an argument" - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" @@ -6009,20 +7453,23 @@ oldlibs= # calculate the name of the file, without its directory func_basename "$output" - outputname="$func_basename_result" - libobjs_save="$libobjs" + outputname=$func_basename_result + libobjs_save=$libobjs if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + # Definition is injected by LT_CONFIG during libtool generation. + func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH" + func_dirname "$output" "/" "" - output_objdir="$func_dirname_result$objdir" + output_objdir=$func_dirname_result$objdir func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. @@ -6045,7 +7492,7 @@ # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac @@ -6053,7 +7500,7 @@ func_append libs " $deplib" done - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps @@ -6085,7 +7532,7 @@ case $file in *.la) ;; *) - func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + func_fatal_help "libraries can '-dlopen' only libtool libraries: $file" ;; esac done @@ -6093,7 +7540,7 @@ prog) compile_deplibs= finalize_deplibs= - alldeplibs=no + alldeplibs=false newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" @@ -6105,32 +7552,32 @@ for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... - if test "$linkmode,$pass" = "lib,link"; then + if test lib,link = "$linkmode,$pass"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done - deplibs="$tmp_deplibs" + deplibs=$tmp_deplibs fi - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" + if test lib,link = "$linkmode,$pass" || + test prog,scan = "$linkmode,$pass"; then + libs=$deplibs deplibs= fi - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; + dlopen) libs=$dlfiles ;; + dlpreopen) libs=$dlprefiles ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi - if test "$linkmode,$pass" = "lib,dlpreopen"; then + if test lib,dlpreopen = "$linkmode,$pass"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs @@ -6151,26 +7598,26 @@ esac done done - libs="$dlprefiles" + libs=$dlprefiles fi - if test "$pass" = dlopen; then + if test dlopen = "$pass"; then # Collect dlpreopened libraries - save_deplibs="$deplibs" + save_deplibs=$deplibs deplibs= fi for deplib in $libs; do lib= - found=no + found=false case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" - if test "$linkmode" = lib ; then + if test lib = "$linkmode"; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; @@ -6180,13 +7627,13 @@ continue ;; -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - func_warning "\`-l' is ignored for archives/objects" + if test lib != "$linkmode" && test prog != "$linkmode"; then + func_warning "'-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" @@ -6194,31 +7641,22 @@ for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" + lib=$searchdir/lib$name$search_ext if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes + if test .la = "$search_ext"; then + found=: else - found=no + found=false fi break 2 fi done done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - else # deplib is a libtool library + if $found; then + # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then @@ -6226,19 +7664,19 @@ old_library= func_source "$lib" for l in $old_library $library_names; do - ll="$l" + ll=$l done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no + if test "X$ll" = "X$old_library"; then # only static version available + found=false func_dirname "$lib" "" "." - ladir="$func_dirname_result" + ladir=$func_dirname_result lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" fi continue fi @@ -6247,15 +7685,25 @@ *) ;; esac fi + else + # deplib doesn't seem to be a libtool library + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" + fi + continue fi ;; # -l *.ltframework) - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" - if test "$linkmode" = lib ; then + if test lib = "$linkmode"; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; @@ -6268,18 +7716,18 @@ case $linkmode in lib) deplibs="$deplib $deplibs" - test "$pass" = conv && continue + test conv = "$pass" && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) - if test "$pass" = conv; then + if test conv = "$pass"; then deplibs="$deplib $deplibs" continue fi - if test "$pass" = scan; then + if test scan = "$pass"; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" @@ -6290,13 +7738,13 @@ func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) - func_warning "\`-L' is ignored for archives/objects" + func_warning "'-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) - if test "$pass" = link; then + if test link = "$pass"; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result @@ -6314,7 +7762,7 @@ lib=$func_resolve_sysroot_result ;; *.$libext) - if test "$pass" = conv; then + if test conv = "$pass"; then deplibs="$deplib $deplibs" continue fi @@ -6325,21 +7773,26 @@ case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) - valid_a_lib=no + valid_a_lib=false case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes + valid_a_lib=: fi ;; pass_all) - valid_a_lib=yes + valid_a_lib=: ;; esac - if test "$valid_a_lib" != yes; then + if $valid_a_lib; then + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + else echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" @@ -6347,18 +7800,13 @@ echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." - else - echo - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) - if test "$pass" != link; then + if test link != "$pass"; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" @@ -6369,10 +7817,10 @@ esac # linkmode ;; # *.$libext *.lo | *.$objext) - if test "$pass" = conv; then + if test conv = "$pass"; then deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + elif test prog = "$linkmode"; then + if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" @@ -6385,22 +7833,20 @@ continue ;; %DEPLIBS%) - alldeplibs=yes + alldeplibs=: continue ;; esac # case $deplib - if test "$found" = yes || test -f "$lib"; then : - else - func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" - fi + $found || test -f "$lib" \ + || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'" # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ - || func_fatal_error "\`$lib' is not a valid libtool archive" + || func_fatal_error "'$lib' is not a valid libtool archive" func_dirname "$lib" "" "." - ladir="$func_dirname_result" + ladir=$func_dirname_result dlname= dlopen= @@ -6430,19 +7876,19 @@ done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then + if test lib,link = "$linkmode,$pass" || + test prog,scan = "$linkmode,$pass" || + { test prog != "$linkmode" && test lib != "$linkmode"; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi - if test "$pass" = conv; then + if test conv = "$pass"; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for \`$lib'" + func_fatal_error "cannot find name of link library for '$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" @@ -6450,15 +7896,15 @@ tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done - elif test "$linkmode" != prog && test "$linkmode" != lib; then - func_fatal_error "\`$lib' is not a convenience library" + elif test prog != "$linkmode" && test lib != "$linkmode"; then + func_fatal_error "'$lib' is not a convenience library" fi continue fi # $pass = conv @@ -6467,26 +7913,26 @@ # Get the name of the library we link against. linklib= if test -n "$old_library" && - { test "$prefer_static_libs" = yes || - test "$prefer_static_libs,$installed" = "built,no"; }; then + { test yes = "$prefer_static_libs" || + test built,no = "$prefer_static_libs,$installed"; }; then linklib=$old_library else for l in $old_library $library_names; do - linklib="$l" + linklib=$l done fi if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for \`$lib'" + func_fatal_error "cannot find name of link library for '$lib'" fi # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - func_fatal_error "cannot -dlopen a convenience library: \`$lib'" - fi + if test dlopen = "$pass"; then + test -z "$libdir" \ + && func_fatal_error "cannot -dlopen a convenience library: '$lib'" if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then + test yes != "$dlopen_support" || + test no = "$build_libtool_libs" + then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't @@ -6500,40 +7946,40 @@ # We need an absolute path. case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "cannot determine absolute directory name of '$ladir'" func_warning "passing it literally to the linker, although it might fail" - abs_ladir="$ladir" + abs_ladir=$ladir fi ;; esac func_basename "$lib" - laname="$func_basename_result" + laname=$func_basename_result # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then + if test yes = "$installed"; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library \`$lib' was moved." - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" + func_warning "library '$lib' was moved." + dir=$ladir + absdir=$abs_ladir + libdir=$abs_ladir else - dir="$lt_sysroot$libdir" - absdir="$lt_sysroot$libdir" + dir=$lt_sysroot$libdir + absdir=$lt_sysroot$libdir fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + test yes = "$hardcode_automatic" && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" + dir=$ladir + absdir=$abs_ladir # Remove this search path later func_append notinst_path " $abs_ladir" else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" + dir=$ladir/$objdir + absdir=$abs_ladir/$objdir # Remove this search path later func_append notinst_path " $abs_ladir" fi @@ -6542,11 +7988,11 @@ name=$func_stripname_result # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir" && test "$linkmode" = prog; then - func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + if test dlpreopen = "$pass"; then + if test -z "$libdir" && test prog = "$linkmode"; then + func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'" fi - case "$host" in + case $host in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both @@ -6590,9 +8036,9 @@ if test -z "$libdir"; then # Link the convenience library - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then + elif test prog,link = "$linkmode,$pass"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else @@ -6602,14 +8048,14 @@ fi - if test "$linkmode" = prog && test "$pass" != link; then + if test prog = "$linkmode" && test link != "$pass"; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes + linkalldeplibs=false + if test no != "$link_all_deplibs" || test -z "$library_names" || + test no = "$build_libtool_libs"; then + linkalldeplibs=: fi tmp_libs= @@ -6621,14 +8067,14 @@ ;; esac # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then + if $linkalldeplibs; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac @@ -6638,15 +8084,15 @@ continue fi # $linkmode = prog... - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then if test -n "$library_names" && - { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || + { { test no = "$prefer_static_libs" || + test built,yes = "$prefer_static_libs,$installed"; } || test -z "$old_library"; }; then # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then # Make sure the rpath contains only unique directories. - case "$temp_rpath:" in + case $temp_rpath: in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac @@ -6675,9 +8121,9 @@ esac fi # $linkmode,$pass = prog,link... - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && + if $alldeplibs && + { test pass_all = "$deplibs_check_method" || + { test yes = "$build_libtool_libs" && test -n "$library_names"; }; }; then # We only need to search for static libraries continue @@ -6686,19 +8132,19 @@ link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes; then + if test built = "$use_static_libs" && test yes = "$installed"; then use_static_libs=no fi if test -n "$library_names" && - { test "$use_static_libs" = no || test -z "$old_library"; }; then + { test no = "$use_static_libs" || test -z "$old_library"; }; then case $host in - *cygwin* | *mingw* | *cegcc*) + *cygwin* | *mingw* | *cegcc* | *os2*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) - if test "$installed" = no; then + if test no = "$installed"; then func_append notinst_deplibs " $lib" need_relink=yes fi @@ -6708,24 +8154,24 @@ # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule="" + dlopenmodule= for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule="$dlpremoduletest" + dlopenmodule=$dlpremoduletest break fi done - if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then echo - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then + if test lib = "$linkmode" && + test yes = "$hardcode_into_libs"; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. @@ -6753,43 +8199,43 @@ # figure out the soname set dummy $library_names shift - realname="$1" + realname=$1 shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then - soname="$dlname" + soname=$dlname elif test -n "$soname_spec"; then # bleh windows case $host in - *cygwin* | mingw* | *cegcc*) + *cygwin* | mingw* | *cegcc* | *os2*) func_arith $current - $age major=$func_arith_result - versuffix="-$major" + versuffix=-$major ;; esac eval soname=\"$soname_spec\" else - soname="$realname" + soname=$realname fi # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" + soroot=$soname func_basename "$soroot" - soname="$func_basename_result" + soname=$func_basename_result func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else - func_verbose "extracting exported symbol list from \`$soname'" + func_verbose "extracting exported symbol list from '$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for \`$soname'" + func_verbose "generating import library for '$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library @@ -6797,58 +8243,58 @@ linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" - if test "$linkmode" = prog || test "$opt_mode" != relink; then + if test prog = "$linkmode" || test relink != "$opt_mode"; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" + if test no = "$hardcode_direct"; then + add=$dir/$linklib case $host in - *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; - *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; + *-*-sysv4*uw2*) add_dir=-L$dir ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir="-L$dir" ;; + *-*-unixware7*) add_dir=-L$dir ;; *-*-darwin* ) - # if the lib is a (non-dlopened) module then we can not + # if the lib is a (non-dlopened) module then we cannot # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null ; then + $GREP ": [^:]* bundle" >/dev/null; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then + if test -z "$old_library"; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else - add="$dir/$old_library" + add=$dir/$old_library fi elif test -n "$old_library"; then - add="$dir/$old_library" + add=$dir/$old_library fi fi esac - elif test "$hardcode_minus_L" = no; then + elif test no = "$hardcode_minus_L"; then case $host in - *-*-sunos*) add_shlibpath="$dir" ;; + *-*-sunos*) add_shlibpath=$dir ;; esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" + add_dir=-L$dir + add=-l$name + elif test no = "$hardcode_shlibpath_var"; then + add_shlibpath=$dir + add=-l$name else lib_linked=no fi ;; relink) - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$absdir" + if test yes = "$hardcode_direct" && + test no = "$hardcode_direct_absolute"; then + add=$dir/$linklib + elif test yes = "$hardcode_minus_L"; then + add_dir=-L$absdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in @@ -6857,10 +8303,10 @@ ;; esac fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" + add=-l$name + elif test yes = "$hardcode_shlibpath_var"; then + add_shlibpath=$dir + add=-l$name else lib_linked=no fi @@ -6868,7 +8314,7 @@ *) lib_linked=no ;; esac - if test "$lib_linked" != yes; then + if test yes != "$lib_linked"; then func_fatal_configuration "unsupported hardcode properties" fi @@ -6878,15 +8324,15 @@ *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && - test "$hardcode_minus_L" != yes && - test "$hardcode_shlibpath_var" = yes; then + if test yes != "$hardcode_direct" && + test yes != "$hardcode_minus_L" && + test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; @@ -6895,33 +8341,33 @@ fi fi - if test "$linkmode" = prog || test "$opt_mode" = relink; then + if test prog = "$linkmode" || test relink = "$opt_mode"; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then + if test yes = "$hardcode_direct" && + test no = "$hardcode_direct_absolute"; then + add=$libdir/$linklib + elif test yes = "$hardcode_minus_L"; then + add_dir=-L$libdir + add=-l$name + elif test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then + add=-l$name + elif test yes = "$hardcode_automatic"; then if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" + test -f "$inst_prefix_dir$libdir/$linklib"; then + add=$inst_prefix_dir$libdir/$linklib else - add="$libdir/$linklib" + add=$libdir/$linklib fi else # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" + add_dir=-L$libdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in @@ -6930,10 +8376,10 @@ ;; esac fi - add="-l$name" + add=-l$name fi - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else @@ -6941,43 +8387,43 @@ test -n "$add" && deplibs="$add $deplibs" fi fi - elif test "$linkmode" = prog; then + elif test prog = "$linkmode"; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" + if test unsupported != "$hardcode_direct"; then + test -n "$old_library" && linklib=$old_library compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi - elif test "$build_libtool_libs" = yes; then + elif test yes = "$build_libtool_libs"; then # Not a shared library - if test "$deplibs_check_method" != pass_all; then + if test pass_all != "$deplibs_check_method"; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo - $ECHO "*** Warning: This system can not link to static lib archive $lib." + $ECHO "*** Warning: This system cannot link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then + if test yes = "$module"; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo "*** 'nm' from GNU binutils and a full rebuild may help." fi - if test "$build_old_libs" = no; then + if test no = "$build_old_libs"; then build_libtool_libs=module build_old_libs=yes else @@ -6990,11 +8436,11 @@ fi fi # link shared/static library? - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then + { test yes != "$hardcode_into_libs" || + test yes = "$build_old_libs" || + test yes = "$link_static"; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do @@ -7008,12 +8454,12 @@ *) func_append temp_deplibs " $libdir";; esac done - dependency_libs="$temp_deplibs" + dependency_libs=$temp_deplibs fi func_append newlib_search_path " $absdir" # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do @@ -7023,7 +8469,7 @@ func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; @@ -7032,12 +8478,12 @@ func_append tmp_libs " $func_resolve_sysroot_result" done - if test "$link_all_deplibs" != no; then + if test no != "$link_all_deplibs"; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in - -L*) path="$deplib" ;; + -L*) path=$deplib ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result @@ -7045,12 +8491,12 @@ dir=$func_dirname_result # We need an absolute path. case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of \`$dir'" - absdir="$dir" + func_warning "cannot determine absolute directory name of '$dir'" + absdir=$dir fi ;; esac @@ -7058,35 +8504,35 @@ case $host in *-*-darwin*) depdepl= - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do + eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names"; then + for tmp in $deplibrary_names; do depdepl=$tmp done - if test -f "$absdir/$objdir/$depdepl" ; then - depdepl="$absdir/$objdir/$depdepl" - darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -f "$absdir/$objdir/$depdepl"; then + depdepl=$absdir/$objdir/$depdepl + darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then - darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi - func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl" + func_append linker_flags " -dylib_file $darwin_install_name:$depdepl" path= fi fi ;; *) - path="-L$absdir/$objdir" + path=-L$absdir/$objdir ;; esac else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" + func_fatal_error "'$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ - func_warning "\`$deplib' seems to be moved" + func_warning "'$deplib' seems to be moved" - path="-L$absdir" + path=-L$absdir fi ;; esac @@ -7098,23 +8544,23 @@ fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs - if test "$pass" = link; then - if test "$linkmode" = "prog"; then + if test link = "$pass"; then + if test prog = "$linkmode"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then + dependency_libs=$newdependency_libs + if test dlpreopen = "$pass"; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then + if test dlopen != "$pass"; then + test conv = "$pass" || { # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do @@ -7124,12 +8570,12 @@ esac done newlib_search_path= - fi + } - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else + if test prog,link = "$linkmode,$pass"; then vars="compile_deplibs finalize_deplibs" + else + vars=deplibs fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order @@ -7187,62 +8633,93 @@ eval $var=\"$tmp_libs\" done # for var fi + + # Add Sun CC postdeps if required: + test CXX = "$tagname" && { + case $host_os in + linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C++ 5.9 + func_suncc_cstd_abi + + if test no != "$suncc_use_cstd_abi"; then + func_append postdeps ' -library=Cstd -library=Crun' + fi + ;; + esac + ;; + + solaris*) + func_cc_basename "$CC" + case $func_cc_basename_result in + CC* | sunCC*) + func_suncc_cstd_abi + + if test no != "$suncc_use_cstd_abi"; then + func_append postdeps ' -library=Cstd -library=Crun' + fi + ;; + esac + ;; + esac + } + # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= - for i in $dependency_libs ; do + for i in $dependency_libs; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) - i="" + i= ;; esac - if test -n "$i" ; then + if test -n "$i"; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" + if test prog = "$linkmode"; then + dlfiles=$newdlfiles fi - if test "$linkmode" = prog || test "$linkmode" = lib; then - dlprefiles="$newdlprefiles" + if test prog = "$linkmode" || test lib = "$linkmode"; then + dlprefiles=$newdlprefiles fi case $linkmode in oldlib) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for archives" + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + func_warning "'-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for archives" ;; + func_warning "'-l' and '-L' are ignored for archives" ;; esac test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for archives" + func_warning "'-rpath' is ignored for archives" test -n "$xrpath" && \ - func_warning "\`-R' is ignored for archives" + func_warning "'-R' is ignored for archives" test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for archives" + func_warning "'-version-info/-version-number' is ignored for archives" test -n "$release" && \ - func_warning "\`-release' is ignored for archives" + func_warning "'-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ - func_warning "\`-export-symbols' is ignored for archives" + func_warning "'-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no - oldlibs="$output" + oldlibs=$output func_append objs "$old_deplibs" ;; lib) - # Make sure we only generate libraries of the form `libNAME.la'. + # Make sure we only generate libraries of the form 'libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" @@ -7251,10 +8728,10 @@ eval libname=\"$libname_spec\" ;; *) - test "$module" = no && \ - func_fatal_help "libtool library \`$output' must begin with \`lib'" + test no = "$module" \ + && func_fatal_help "libtool library '$output' must begin with 'lib'" - if test "$need_lib_prefix" != no; then + if test no != "$need_lib_prefix"; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result @@ -7268,8 +8745,8 @@ esac if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + if test pass_all != "$deplibs_check_method"; then + func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" @@ -7278,21 +8755,21 @@ fi fi - test "$dlself" != no && \ - func_warning "\`-dlopen self' is ignored for libtool libraries" + test no = "$dlself" \ + || func_warning "'-dlopen self' is ignored for libtool libraries" set dummy $rpath shift - test "$#" -gt 1 && \ - func_warning "ignoring multiple \`-rpath's for a libtool library" + test 1 -lt "$#" \ + && func_warning "ignoring multiple '-rpath's for a libtool library" - install_libdir="$1" + install_libdir=$1 oldlibs= if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so + # Some compilers have problems with a '.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" @@ -7301,20 +8778,20 @@ fi test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + func_warning "'-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ - func_warning "\`-release' is ignored for convenience libraries" + func_warning "'-release' is ignored for convenience libraries" else # Parse the version information argument. - save_ifs="$IFS"; IFS=':' + save_ifs=$IFS; IFS=: set dummy $vinfo 0 0 0 shift - IFS="$save_ifs" + IFS=$save_ifs test -n "$7" && \ - func_fatal_help "too many parameters to \`-version-info'" + func_fatal_help "too many parameters to '-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts @@ -7322,45 +8799,45 @@ case $vinfo_number in yes) - number_major="$1" - number_minor="$2" - number_revision="$3" + number_major=$1 + number_minor=$2 + number_revision=$3 # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix - # which has an extra 1 added just for fun + # that has an extra 1 added just for fun # case $version_type in # correct linux to gnu/linux during the next big refactor - darwin|linux|osf|windows|none) + darwin|freebsd-elf|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result - age="$number_minor" - revision="$number_revision" + age=$number_minor + revision=$number_revision ;; - freebsd-aout|freebsd-elf|qnx|sunos) - current="$number_major" - revision="$number_minor" - age="0" + freebsd-aout|qnx|sunos) + current=$number_major + revision=$number_minor + age=0 ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result - age="$number_minor" - revision="$number_minor" + age=$number_minor + revision=$number_minor lt_irix_increment=no ;; *) - func_fatal_configuration "$modename: unknown library version type \`$version_type'" + func_fatal_configuration "$modename: unknown library version type '$version_type'" ;; esac ;; no) - current="$1" - revision="$2" - age="$3" + current=$1 + revision=$2 + age=$3 ;; esac @@ -7368,30 +8845,30 @@ case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "CURRENT \`$current' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "CURRENT '$current' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "REVISION \`$revision' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "REVISION '$revision' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "AGE \`$age' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "AGE '$age' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then - func_error "AGE \`$age' is greater than the current interface number \`$current'" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "AGE '$age' is greater than the current interface number '$current'" + func_fatal_error "'$vinfo' is not valid version information" fi # Calculate the version variables. @@ -7406,26 +8883,36 @@ # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result - versuffix="$major.$age.$revision" + versuffix=$major.$age.$revision # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result - xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + # On Darwin other compilers + case $CC in + nagfor*) + verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" + ;; + *) + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + esac ;; freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; + major=.$current + versuffix=.$current.$revision ;; freebsd-elf) - major=".$current" - versuffix=".$current" + func_arith $current - $age + major=.$func_arith_result + versuffix=$major.$age.$revision ;; irix | nonstopux) - if test "X$lt_irix_increment" = "Xno"; then + if test no = "$lt_irix_increment"; then func_arith $current - $age else func_arith $current - $age + 1 @@ -7436,69 +8923,74 @@ nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac - verstring="$verstring_prefix$major.$revision" + verstring=$verstring_prefix$major.$revision # Add in all the interfaces that we are compatible with. loop=$revision - while test "$loop" -ne 0; do + while test 0 -ne "$loop"; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result - verstring="$verstring_prefix$major.$iface:$verstring" + verstring=$verstring_prefix$major.$iface:$verstring done - # Before this point, $major must not contain `.'. + # Before this point, $major must not contain '.'. major=.$major - versuffix="$major.$revision" + versuffix=$major.$revision ;; linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result - versuffix="$major.$age.$revision" + versuffix=$major.$age.$revision ;; osf) func_arith $current - $age major=.$func_arith_result - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" + versuffix=.$current.$age.$revision + verstring=$current.$age.$revision # Add in all the interfaces that we are compatible with. loop=$age - while test "$loop" -ne 0; do + while test 0 -ne "$loop"; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result - verstring="$verstring:${iface}.0" + verstring=$verstring:$iface.0 done # Make executables depend on our current version. - func_append verstring ":${current}.0" + func_append verstring ":$current.0" ;; qnx) - major=".$current" - versuffix=".$current" + major=.$current + versuffix=.$current + ;; + + sco) + major=.$current + versuffix=.$current ;; sunos) - major=".$current" - versuffix=".$current.$revision" + major=.$current + versuffix=.$current.$revision ;; windows) # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. + # extension on DOS 8.3 file systems. func_arith $current - $age major=$func_arith_result - versuffix="-$major" + versuffix=-$major ;; *) - func_fatal_configuration "unknown library version type \`$version_type'" + func_fatal_configuration "unknown library version type '$version_type'" ;; esac @@ -7512,42 +9004,45 @@ verstring= ;; *) - verstring="0.0" + verstring=0.0 ;; esac - if test "$need_version" = no; then + if test no = "$need_version"; then versuffix= else - versuffix=".0.0" + versuffix=.0.0 fi fi # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then + if test yes,no = "$avoid_version,$need_version"; then major= versuffix= - verstring="" + verstring= fi # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - func_warning "undefined symbols not allowed in $host shared libraries" - build_libtool_libs=no - build_old_libs=yes + if test yes = "$allow_undefined"; then + if test unsupported = "$allow_undefined_flag"; then + if test yes = "$build_old_libs"; then + func_warning "undefined symbols not allowed in $host shared libraries; building static only" + build_libtool_libs=no + else + func_fatal_error "can't build $host shared library unless -no-undefined is specified" + fi fi else # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" + allow_undefined_flag=$no_undefined_flag fi fi - func_generate_dlsyms "$libname" "$libname" "yes" + func_generate_dlsyms "$libname" "$libname" : func_append libobjs " $symfileobj" - test "X$libobjs" = "X " && libobjs= + test " " = "$libobjs" && libobjs= - if test "$opt_mode" != relink; then + if test relink != "$opt_mode"; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= @@ -7556,8 +9051,8 @@ case $p in *.$objext | *.gcno) ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*) + if test -n "$precious_files_regex"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue @@ -7573,11 +9068,11 @@ fi # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. @@ -7598,13 +9093,13 @@ *) func_append finalize_rpath " $libdir" ;; esac done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" + old_dlfiles=$dlfiles dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in @@ -7614,7 +9109,7 @@ done # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" + old_dlprefiles=$dlprefiles dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in @@ -7623,7 +9118,7 @@ esac done - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) @@ -7647,7 +9142,7 @@ ;; *) # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then + if test yes = "$build_libtool_need_lc"; then func_append deplibs " -lc" fi ;; @@ -7663,9 +9158,9 @@ # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? - release="" - versuffix="" - major="" + release= + versuffix= + major= newdeplibs= droppeddeps=no case $deplibs_check_method in @@ -7694,20 +9189,20 @@ -l*) func_stripname -l '' "$i" name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $i "*) func_append newdeplibs " $i" - i="" + i= ;; esac fi - if test -n "$i" ; then + if test -n "$i"; then libname=`eval "\\$ECHO \"$libname_spec\""` deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` set dummy $deplib_matches; shift deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then func_append newdeplibs " $i" else droppeddeps=yes @@ -7737,20 +9232,20 @@ $opt_dry_run || $RM conftest if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ldd_output=`ldd conftest` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $i "*) func_append newdeplibs " $i" - i="" + i= ;; esac fi - if test -n "$i" ; then + if test -n "$i"; then libname=`eval "\\$ECHO \"$libname_spec\""` deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` set dummy $deplib_matches; shift deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then func_append newdeplibs " $i" else droppeddeps=yes @@ -7787,24 +9282,24 @@ -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= ;; esac fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then libname=`eval "\\$ECHO \"$libname_spec\""` if test -n "$file_magic_glob"; then libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` else libnameglob=$libname fi - test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` + test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - if test "$want_nocaseglob" = yes; then + if test yes = "$want_nocaseglob"; then shopt -s nocaseglob potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` $nocaseglob @@ -7822,25 +9317,25 @@ # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? - potlib="$potent_lib" + potlib=$potent_lib while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + potliblink=`ls -ld $potlib | $SED 's/.* -> //'` case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;; + *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= break 2 fi done done fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." @@ -7848,7 +9343,7 @@ echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then + if test -z "$potlib"; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" @@ -7871,30 +9366,30 @@ -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= ;; esac fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test + potlib=$potent_lib # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= break 2 fi done done fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." @@ -7902,7 +9397,7 @@ echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then + if test -z "$potlib"; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" @@ -7918,18 +9413,18 @@ done # Gone through all deplibs. ;; none | unknown | *) - newdeplibs="" + newdeplibs= tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + for i in $predeps $postdeps; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"` done fi case $tmp_deplibs in *[!\ \ ]*) echo - if test "X$deplibs_check_method" = "Xnone"; then + if test none = "$deplibs_check_method"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." @@ -7953,8 +9448,8 @@ ;; esac - if test "$droppeddeps" = yes; then - if test "$module" = yes; then + if test yes = "$droppeddeps"; then + if test yes = "$module"; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" @@ -7963,12 +9458,12 @@ if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo "*** 'nm' from GNU binutils and a full rebuild may help." fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" + if test no = "$build_old_libs"; then + oldlibs=$output_objdir/$libname.$libext build_libtool_libs=module build_old_libs=yes else @@ -7979,14 +9474,14 @@ echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." - if test "$allow_undefined" = no; then + if test no = "$allow_undefined"; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" + if test no = "$build_old_libs"; then + oldlibs=$output_objdir/$libname.$libext build_libtool_libs=module build_old_libs=yes else @@ -8032,7 +9527,7 @@ *) func_append new_libs " $deplib" ;; esac done - deplibs="$new_libs" + deplibs=$new_libs # All the library-specific variables (install_libdir is set above). library_names= @@ -8040,25 +9535,25 @@ dlname= # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - # Remove ${wl} instances when linking with ld. + if test yes = "$build_libtool_libs"; then + # Remove $wl instances when linking with ld. # FIXME: should test the right _cmds variable. case $archive_cmds in *\$LD\ *) wl= ;; esac - if test "$hardcode_into_libs" = yes; then + if test yes = "$hardcode_into_libs"; then # Hardcode the library paths hardcode_libdirs= dep_rpath= - rpath="$finalize_rpath" - test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + rpath=$finalize_rpath + test relink = "$opt_mode" || rpath=$compile_rpath$rpath for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" + hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in @@ -8083,7 +9578,7 @@ # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" + libdir=$hardcode_libdirs eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then @@ -8097,8 +9592,8 @@ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi - shlibpath="$finalize_shlibpath" - test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + shlibpath=$finalize_shlibpath + test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi @@ -8108,19 +9603,19 @@ eval library_names=\"$library_names_spec\" set dummy $library_names shift - realname="$1" + realname=$1 shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else - soname="$realname" + soname=$realname fi if test -z "$dlname"; then dlname=$soname fi - lib="$output_objdir/$realname" + lib=$output_objdir/$realname linknames= for link do @@ -8134,7 +9629,7 @@ delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols="$output_objdir/$libname.uexp" + export_symbols=$output_objdir/$libname.uexp func_append delfiles " $export_symbols" fi @@ -8143,31 +9638,31 @@ cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile - if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + func_dll_def_p "$export_symbols" || { # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. - orig_export_symbols="$export_symbols" + orig_export_symbols=$export_symbols export_symbols= always_export_symbols=yes - fi + } fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" + if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for '$libname.la'" + export_symbols=$output_objdir/$libname.exp $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds - save_ifs="$IFS"; IFS='~' + save_ifs=$IFS; IFS='~' for cmd1 in $cmds; do - IFS="$save_ifs" + IFS=$save_ifs # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in @@ -8181,7 +9676,7 @@ try_normal_branch=no ;; esac - if test "$try_normal_branch" = yes \ + if test yes = "$try_normal_branch" \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then @@ -8192,7 +9687,7 @@ output_la=$func_basename_result save_libobjs=$libobjs save_output=$output - output=${output_objdir}/${output_la}.nm + output=$output_objdir/$output_la.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" @@ -8215,8 +9710,8 @@ break fi done - IFS="$save_ifs" - if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + IFS=$save_ifs + if test -n "$export_symbols_regex" && test : != "$skipped_export"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi @@ -8224,16 +9719,16 @@ fi if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + tmp_export_symbols=$export_symbols + test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi - if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + if test : != "$skipped_export" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + func_verbose "filter symbol list for '$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine + # 's' commands, which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. @@ -8252,11 +9747,11 @@ ;; esac done - deplibs="$tmp_deplibs" + deplibs=$tmp_deplibs if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && - test "$compiler_needs_object" = yes && + test yes = "$compiler_needs_object" && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. @@ -8267,7 +9762,7 @@ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $convenience @@ -8276,18 +9771,18 @@ fi fi - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then + if test yes = "$module" && test -n "$module_cmds"; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds @@ -8305,7 +9800,7 @@ fi fi - if test "X$skipped_export" != "X:" && + if test : != "$skipped_export" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then @@ -8338,8 +9833,8 @@ last_robj= k=1 - if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then - output=${output_objdir}/${output_la}.lnkscript + if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then + output=$output_objdir/$output_la.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs @@ -8351,14 +9846,14 @@ func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result - elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then - output=${output_objdir}/${output_la}.lnk + elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then + output=$output_objdir/$output_la.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= - if test "$compiler_needs_object" = yes; then + if test yes = "$compiler_needs_object"; then firstobj="$1 " shift fi @@ -8373,7 +9868,7 @@ else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-${k}.$objext + output=$output_objdir/$output_la-$k.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result @@ -8385,13 +9880,13 @@ func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result - if test "X$objlist" = X || + if test -z "$objlist" || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. - if test "$k" -eq 1 ; then + if test 1 -eq "$k"; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" @@ -8401,10 +9896,10 @@ reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi - last_robj=$output_objdir/$output_la-${k}.$objext + last_robj=$output_objdir/$output_la-$k.$objext func_arith $k + 1 k=$func_arith_result - output=$output_objdir/$output_la-${k}.$objext + output=$output_objdir/$output_la-$k.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result @@ -8416,9 +9911,9 @@ # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" - eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + eval concat_cmds=\"\$concat_cmds$reload_cmds\" if test -n "$last_robj"; then - eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi func_append delfiles " $output" @@ -8426,9 +9921,9 @@ output= fi - if ${skipped_export-false}; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" + ${skipped_export-false} && { + func_verbose "generating symbol list for '$libname.la'" + export_symbols=$output_objdir/$libname.exp $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. @@ -8437,16 +9932,16 @@ if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi - fi + } test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' + save_ifs=$IFS; IFS='~' for cmd in $concat_cmds; do - IFS="$save_ifs" - $opt_silent || { + IFS=$save_ifs + $opt_quiet || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } @@ -8454,7 +9949,7 @@ lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8463,7 +9958,7 @@ exit $lt_exit } done - IFS="$save_ifs" + IFS=$save_ifs if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' @@ -8471,18 +9966,18 @@ fi fi - if ${skipped_export-false}; then + ${skipped_export-false} && { if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + tmp_export_symbols=$export_symbols + test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + func_verbose "filter symbol list for '$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine + # 's' commands, which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. @@ -8491,7 +9986,7 @@ export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi - fi + } libobjs=$output # Restore the value of output. @@ -8505,7 +10000,7 @@ # value of $libobjs for piecewise linking. # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then + if test yes = "$module" && test -n "$module_cmds"; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else @@ -8527,7 +10022,7 @@ # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $dlprefiles @@ -8535,11 +10030,12 @@ test "X$libobjs" = "X " && libobjs= fi - save_ifs="$IFS"; IFS='~' + save_ifs=$IFS; IFS='~' for cmd in $cmds; do - IFS="$save_ifs" + IFS=$sp$nl eval cmd=\"$cmd\" - $opt_silent || { + IFS=$save_ifs + $opt_quiet || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } @@ -8547,7 +10043,7 @@ lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8556,10 +10052,10 @@ exit $lt_exit } done - IFS="$save_ifs" + IFS=$save_ifs # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then @@ -8579,39 +10075,39 @@ done # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then + if test yes = "$module" || test yes = "$export_dynamic"; then # On all known operating systems, these are identical. - dlname="$soname" + dlname=$soname fi fi ;; obj) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for objects" + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + func_warning "'-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for objects" ;; + func_warning "'-l' and '-L' are ignored for objects" ;; esac test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for objects" + func_warning "'-rpath' is ignored for objects" test -n "$xrpath" && \ - func_warning "\`-R' is ignored for objects" + func_warning "'-R' is ignored for objects" test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for objects" + func_warning "'-version-info' is ignored for objects" test -n "$release" && \ - func_warning "\`-release' is ignored for objects" + func_warning "'-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object \`$output' from non-libtool objects" + func_fatal_error "cannot build library object '$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" @@ -8619,7 +10115,7 @@ ;; *) libobj= - obj="$output" + obj=$output ;; esac @@ -8632,17 +10128,19 @@ # the extraction. reload_conv_objs= gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec and hope we can get by with - # turning comma into space.. - wl= - + # if reload_cmds runs $LD directly, get rid of -Wl from + # whole_archive_flag_spec and hope we can get by with turning comma + # into space. + case $reload_cmds in + *\$LD[\ \$]*) wl= ;; + esac if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags else - gentop="$output_objdir/${obj}x" + gentop=$output_objdir/${obj}x func_append generated " $gentop" func_extract_archives $gentop $convenience @@ -8651,12 +10149,12 @@ fi # If we're not building shared, we need to use non_pic_objs - test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + test yes = "$build_libtool_libs" || libobjs=$non_pic_objects # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs - output="$obj" + output=$obj func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. @@ -8668,7 +10166,7 @@ exit $EXIT_SUCCESS fi - if test "$build_libtool_libs" != yes; then + test yes = "$build_libtool_libs" || { if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi @@ -8678,12 +10176,12 @@ # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS - fi + } - if test -n "$pic_flag" || test "$pic_mode" != default; then + if test -n "$pic_flag" || test default != "$pic_mode"; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" - output="$libobj" + output=$libobj func_execute_cmds "$reload_cmds" 'exit $?' fi @@ -8700,16 +10198,14 @@ output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for programs" + func_warning "'-version-info' is ignored for programs" test -n "$release" && \ - func_warning "\`-release' is ignored for programs" + func_warning "'-release' is ignored for programs" - test "$preload" = yes \ - && test "$dlopen_support" = unknown \ - && test "$dlopen_self" = unknown \ - && test "$dlopen_self_static" = unknown && \ - func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + $preload \ + && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \ + && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) @@ -8723,11 +10219,11 @@ *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). - if test "$tagname" = CXX ; then + if test CXX = "$tagname"; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) - func_append compile_command " ${wl}-bind_at_load" - func_append finalize_command " ${wl}-bind_at_load" + func_append compile_command " $wl-bind_at_load" + func_append finalize_command " $wl-bind_at_load" ;; esac fi @@ -8763,7 +10259,7 @@ *) func_append new_libs " $deplib" ;; esac done - compile_deplibs="$new_libs" + compile_deplibs=$new_libs func_append compile_command " $compile_deplibs" @@ -8787,7 +10283,7 @@ if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" + hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in @@ -8810,7 +10306,7 @@ fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; @@ -8827,10 +10323,10 @@ # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" + libdir=$hardcode_libdirs eval rpath=\" $hardcode_libdir_flag_spec\" fi - compile_rpath="$rpath" + compile_rpath=$rpath rpath= hardcode_libdirs= @@ -8838,7 +10334,7 @@ if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" + hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in @@ -8863,45 +10359,43 @@ # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" + libdir=$hardcode_libdirs eval rpath=\" $hardcode_libdir_flag_spec\" fi - finalize_rpath="$rpath" + finalize_rpath=$rpath - if test -n "$libobjs" && test "$build_old_libs" = yes; then + if test -n "$libobjs" && test yes = "$build_old_libs"; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi - func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + func_generate_dlsyms "$outputname" "@PROGRAM@" false # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi - wrappers_required=yes + wrappers_required=: case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. - wrappers_required=no + wrappers_required=false ;; *cygwin* | *mingw* ) - if test "$build_libtool_libs" != yes; then - wrappers_required=no - fi + test yes = "$build_libtool_libs" || wrappers_required=false ;; *) - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - wrappers_required=no + if test no = "$need_relink" || test yes != "$build_libtool_libs"; then + wrappers_required=false fi ;; esac - if test "$wrappers_required" = no; then + $wrappers_required || { # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" + link_command=$compile_command$compile_rpath # We have no uninstalled library dependencies, so finalize right now. exit_status=0 @@ -8914,12 +10408,12 @@ fi # Delete the generated files. - if test -f "$output_objdir/${outputname}S.${objext}"; then - func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + if test -f "$output_objdir/${outputname}S.$objext"; then + func_show_eval '$RM "$output_objdir/${outputname}S.$objext"' fi exit $exit_status - fi + } if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" @@ -8949,9 +10443,9 @@ fi fi - if test "$no_install" = yes; then + if test yes = "$no_install"; then # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" + link_command=$compile_var$compile_command$compile_rpath # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. @@ -8968,27 +10462,28 @@ exit $EXIT_SUCCESS fi - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - func_warning "this platform does not like uninstalled shared libraries" - func_warning "\`$output' will be relinked during installation" - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi + case $hardcode_action,$fast_install in + relink,*) + # Fast installation is not supported + link_command=$compile_var$compile_command$compile_rpath + relink_command=$finalize_var$finalize_command$finalize_rpath + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "'$output' will be relinked during installation" + ;; + *,yes) + link_command=$finalize_var$compile_command$finalize_rpath + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + ;; + *,no) + link_command=$compile_var$compile_command$compile_rpath + relink_command=$finalize_var$finalize_command$finalize_rpath + ;; + *,needless) + link_command=$finalize_var$compile_command$finalize_rpath + relink_command= + ;; + esac # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` @@ -9045,8 +10540,8 @@ func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" + cwrappersource=$output_path/$objdir/lt-$output_name.c + cwrapper=$output_path/$output_name.exe $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 @@ -9067,7 +10562,7 @@ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host" ; then + if test "x$build" = "x$host"; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result @@ -9090,25 +10585,27 @@ # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save $symfileobj" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" + case $build_libtool_libs in + convenience) + oldobjs="$libobjs_save $symfileobj" + addlibs=$convenience build_libtool_libs=no - else + ;; + module) + oldobjs=$libobjs_save + addlibs=$old_convenience + build_libtool_libs=no + ;; + *) oldobjs="$old_deplibs $non_pic_objects" - if test "$preload" = yes && test -f "$symfileobj"; then - func_append oldobjs " $symfileobj" - fi - fi - addlibs="$old_convenience" - fi + $preload && test -f "$symfileobj" \ + && func_append oldobjs " $symfileobj" + addlibs=$old_convenience + ;; + esac if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $addlibs @@ -9116,13 +10613,13 @@ fi # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $dlprefiles @@ -9143,7 +10640,7 @@ : else echo "copying selected object files to avoid basename conflicts..." - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs @@ -9152,7 +10649,7 @@ for obj in $save_oldobjs do func_basename "$obj" - objbase="$func_basename_result" + objbase=$func_basename_result case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) @@ -9221,18 +10718,18 @@ else # the above command should be used before it gets too long oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then + if test "$obj" = "$last_oldobj"; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + eval concat_cmds=\"\$concat_cmds$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist - if test "X$oldobjs" = "X" ; then + if test -z "$oldobjs"; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" @@ -9249,7 +10746,7 @@ case $output in *.la) old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" + test yes = "$build_old_libs" && old_library=$libname.$libext func_verbose "creating $output" # Preserve any variables that may affect compiler behavior @@ -9264,31 +10761,31 @@ fi done # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - if test "$hardcode_automatic" = yes ; then + if test yes = "$hardcode_automatic"; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do - if test "$installed" = yes; then + if test yes = "$installed"; then if test -z "$install_libdir"; then break fi - output="$output_objdir/$outputname"i + output=$output_objdir/${outputname}i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" - name="$func_basename_result" + name=$func_basename_result func_resolve_sysroot "$deplib" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" + func_fatal_error "'$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) @@ -9304,23 +10801,23 @@ *) func_append newdependency_libs " $deplib" ;; esac done - dependency_libs="$newdependency_libs" + dependency_libs=$newdependency_libs newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + name=$func_basename_result + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" + func_fatal_error "'$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done - dlfiles="$newdlfiles" + dlfiles=$newdlfiles newdlprefiles= for lib in $dlprefiles; do case $lib in @@ -9330,34 +10827,34 @@ # didn't already link the preopened objects directly into # the library: func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + name=$func_basename_result + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" + func_fatal_error "'$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done - dlprefiles="$newdlprefiles" + dlprefiles=$newdlprefiles else newdlfiles= for lib in $dlfiles; do case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done - dlfiles="$newdlfiles" + dlfiles=$newdlfiles newdlprefiles= for lib in $dlprefiles; do case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done - dlprefiles="$newdlprefiles" + dlprefiles=$newdlprefiles fi $RM $output # place dlname in correct position for cygwin @@ -9373,10 +10870,9 @@ case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. - if test "x$bindir" != x ; - then + if test -n "$bindir"; then func_relative_path "$install_libdir" "$bindir" - tdlname=$func_relative_path_result$dlname + tdlname=$func_relative_path_result/$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname @@ -9385,7 +10881,7 @@ esac $ECHO > $output "\ # $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. @@ -9399,7 +10895,7 @@ # The name of the static archive. old_library='$old_library' -# Linker flags that can not go in dependency_libs. +# Linker flags that cannot go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. @@ -9425,7 +10921,7 @@ # Directory that this library needs to be installed in: libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then + if test no,yes = "$installed,$need_relink"; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi @@ -9440,27 +10936,29 @@ exit $EXIT_SUCCESS } -{ test "$opt_mode" = link || test "$opt_mode" = relink; } && - func_mode_link ${1+"$@"} +if test link = "$opt_mode" || test relink = "$opt_mode"; then + func_mode_link ${1+"$@"} +fi # func_mode_uninstall arg... func_mode_uninstall () { - $opt_debug - RM="$nonopt" + $debug_cmd + + RM=$nonopt files= - rmforce= + rmforce=false exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. - libtool_install_magic="$magic" + libtool_install_magic=$magic for arg do case $arg in - -f) func_append RM " $arg"; rmforce=yes ;; + -f) func_append RM " $arg"; rmforce=: ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac @@ -9473,18 +10971,18 @@ for file in $files; do func_dirname "$file" "" "." - dir="$func_dirname_result" - if test "X$dir" = X.; then - odir="$objdir" + dir=$func_dirname_result + if test . = "$dir"; then + odir=$objdir else - odir="$dir/$objdir" + odir=$dir/$objdir fi func_basename "$file" - name="$func_basename_result" - test "$opt_mode" = uninstall && odir="$dir" + name=$func_basename_result + test uninstall = "$opt_mode" && odir=$dir # Remember odir for removal later, being careful to avoid duplicates - if test "$opt_mode" = clean; then + if test clean = "$opt_mode"; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; @@ -9499,11 +10997,11 @@ elif test -d "$file"; then exit_status=1 continue - elif test "$rmforce" = yes; then + elif $rmforce; then continue fi - rmfiles="$file" + rmfiles=$file case $name in *.la) @@ -9517,7 +11015,7 @@ done test -n "$old_library" && func_append rmfiles " $odir/$old_library" - case "$opt_mode" in + case $opt_mode in clean) case " $library_names " in *" $dlname "*) ;; @@ -9528,12 +11026,12 @@ uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; @@ -9549,21 +11047,19 @@ func_source $dir/$name # Add PIC object to the list of files to remove. - if test -n "$pic_object" && - test "$pic_object" != none; then + if test -n "$pic_object" && test none != "$pic_object"; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && - test "$non_pic_object" != none; then + if test -n "$non_pic_object" && test none != "$non_pic_object"; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) - if test "$opt_mode" = clean ; then + if test clean = "$opt_mode"; then noexename=$name case $file in *.exe) @@ -9590,12 +11086,12 @@ # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles - func_append rmfiles " $odir/$name $odir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then + func_append rmfiles " $odir/$name $odir/${name}S.$objext" + if test yes = "$fast_install" && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi - if test "X$noexename" != "X$name" ; then - func_append rmfiles " $odir/lt-${noexename}.c" + if test "X$noexename" != "X$name"; then + func_append rmfiles " $odir/lt-$noexename.c" fi fi fi @@ -9604,7 +11100,7 @@ func_show_eval "$RM $rmfiles" 'exit_status=1' done - # Try to remove the ${objdir}s in the directories where we deleted files + # Try to remove the $objdir's in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" @@ -9614,16 +11110,17 @@ exit $exit_status } -{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && - func_mode_uninstall ${1+"$@"} +if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then + func_mode_uninstall ${1+"$@"} +fi test -z "$opt_mode" && { - help="$generic_help" + help=$generic_help func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode '$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" @@ -9634,7 +11131,7 @@ # The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting +# where we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support @@ -9657,5 +11154,3 @@ # mode:shell-script # sh-indentation:2 # End: -# vi:sw=2 - diff -Nru parlatype-1.5.4/m4/intltool.m4 parlatype-1.5.6/m4/intltool.m4 --- parlatype-1.5.4/m4/intltool.m4 2017-10-12 10:55:18.000000000 +0000 +++ parlatype-1.5.6/m4/intltool.m4 2018-04-09 18:21:48.000000000 +0000 @@ -155,31 +155,6 @@ # Substitute ALL_LINGUAS so we can use it in po/Makefile AC_SUBST(ALL_LINGUAS) -# Set DATADIRNAME correctly if it is not set yet -# (copied from glib-gettext.m4) -if test -z "$DATADIRNAME"; then - AC_LINK_IFELSE( - [AC_LANG_PROGRAM([[]], - [[extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr]])], - [DATADIRNAME=share], - [case $host in - *-*-solaris*) - dnl On Solaris, if bind_textdomain_codeset is in libc, - dnl GNU format message catalog is always supported, - dnl since both are added to the libc all together. - dnl Hence, we'd like to go with DATADIRNAME=share - dnl in this case. - AC_CHECK_FUNC(bind_textdomain_codeset, - [DATADIRNAME=share], [DATADIRNAME=lib]) - ;; - *) - [DATADIRNAME=lib] - ;; - esac]) -fi -AC_SUBST(DATADIRNAME) - IT_PO_SUBDIR([po]) ]) diff -Nru parlatype-1.5.4/m4/libtool.m4 parlatype-1.5.6/m4/libtool.m4 --- parlatype-1.5.4/m4/libtool.m4 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/m4/libtool.m4 2018-04-09 18:22:53.000000000 +0000 @@ -1,8 +1,6 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives @@ -10,36 +8,30 @@ # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. # -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. # -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with this program. If not, see . ]) -# serial 57 LT_INIT +# serial 58 LT_INIT # LT_PREREQ(VERSION) @@ -67,7 +59,7 @@ # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], -[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl @@ -91,7 +83,7 @@ _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" +LIBTOOL_DEPS=$ltmain # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' @@ -111,26 +103,43 @@ dnl AC_DEFUN([AM_PROG_LIBTOOL], []) +# _LT_PREPARE_CC_BASENAME +# ----------------------- +m4_defun([_LT_PREPARE_CC_BASENAME], [ +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in @S|@*""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} +])# _LT_PREPARE_CC_BASENAME + + # _LT_CC_BASENAME(CC) # ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME, +# but that macro is also expanded into generated libtool script, which +# arranges for $SED and $ECHO to be set by different means. m4_defun([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +[m4_require([_LT_PREPARE_CC_BASENAME])dnl +AC_REQUIRE([_LT_DECL_SED])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl +func_cc_basename $1 +cc_basename=$func_cc_basename_result ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set -# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} @@ -177,15 +186,16 @@ m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_WITH_SYSROOT])dnl +m4_require([_LT_CMD_TRUNCATE])dnl _LT_CONFIG_LIBTOOL_INIT([ -# See if we are running on zsh, and set the options which allow our +# See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then +if test -n "\${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi ]) -if test -n "${ZSH_VERSION+set}" ; then +if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi @@ -198,7 +208,7 @@ # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then + if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -209,14 +219,14 @@ ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except MSVC, +# All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a -with_gnu_ld="$lt_cv_prog_gnu_ld" +with_gnu_ld=$lt_cv_prog_gnu_ld -old_CC="$CC" -old_CFLAGS="$CFLAGS" +old_CC=$CC +old_CFLAGS=$CFLAGS # Set sane defaults for various variables test -z "$CC" && CC=cc @@ -269,14 +279,14 @@ # _LT_PROG_LTMAIN # --------------- -# Note that this code is called both from `configure', and `config.status' +# Note that this code is called both from 'configure', and 'config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# `config.status' has no value for ac_aux_dir unless we are using Automake, +# 'config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -ltmain="$ac_aux_dir/ltmain.sh" +ltmain=$ac_aux_dir/ltmain.sh ])# _LT_PROG_LTMAIN @@ -286,7 +296,7 @@ # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the `libtool' +# in macros and then make a single call at the end using the 'libtool' # label. @@ -421,8 +431,8 @@ # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ -# Quote a variable value, and forward it to `config.status' so that its -# declaration there will have the same value as in `configure'. VARNAME +# Quote a variable value, and forward it to 'config.status' so that its +# declaration there will have the same value as in 'configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) @@ -446,7 +456,7 @@ # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -available_tags="_LT_TAGS"dnl +available_tags='_LT_TAGS'dnl ]) @@ -474,7 +484,7 @@ # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], @@ -500,8 +510,8 @@ # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations -# into `config.status', and then the shell code to quote escape them in -# for loops in `config.status'. Finally, any additional code accumulated +# into 'config.status', and then the shell code to quote escape them in +# for loops in 'config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], @@ -547,7 +557,7 @@ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -560,7 +570,7 @@ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -576,7 +586,7 @@ # Generate a child script FILE with all initialization necessary to # reuse the environment learned by the parent script, and make the # file executable. If COMMENT is supplied, it is inserted after the -# `#!' sequence but before initialization text begins. After this +# '#!' sequence but before initialization text begins. After this # macro, additional text can be appended to FILE to form the body of # the child script. The macro ends with non-zero status if the # file could not be fully written (such as if the disk is full). @@ -598,7 +608,7 @@ _AS_PREPARE exec AS_MESSAGE_FD>&1 _ASEOF -test $lt_write_fail = 0 && chmod +x $1[]dnl +test 0 = "$lt_write_fail" && chmod +x $1[]dnl m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT @@ -621,7 +631,7 @@ } >&AS_MESSAGE_LOG_FD lt_cl_help="\ -\`$as_me' creates a local libtool stub from the current configuration, +'$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. @@ -643,7 +653,7 @@ This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." -while test $[#] != 0 +while test 0 != $[#] do case $[1] in --version | --v* | -V ) @@ -656,10 +666,10 @@ lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] -Try \`$[0] --help' for more information.]) ;; +Try '$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] -Try \`$[0] --help' for more information.]) ;; +Try '$[0] --help' for more information.]) ;; esac shift done @@ -685,7 +695,7 @@ # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. lt_cl_success=: -test "$silent" = yes && +test yes = "$silent" && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false @@ -705,27 +715,30 @@ _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ - # See if we are running on zsh, and set the options which allow our + # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then + if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi - cfgfile="${ofile}T" + cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# Generated automatically by $as_me ($PACKAGE) $VERSION # NOTE: Changes made to this file will be lost: look at ltmain.sh. -# + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + _LT_COPYING _LT_LIBTOOL_TAGS +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} + # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS @@ -733,13 +746,24 @@ _LT_EOF + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +_LT_PREPARE_MUNGE_PATH_LIST +_LT_PREPARE_CC_BASENAME + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then +if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -756,8 +780,6 @@ sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) - _LT_PROG_REPLACE_SHELLFNS - mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" @@ -775,7 +797,6 @@ [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS @@ -974,7 +995,7 @@ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then + if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the @@ -992,7 +1013,7 @@ cat conftest.err >&AS_MESSAGE_LOG_FD # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. - elif test -f libconftest.dylib && test $_lt_result -eq 0; then + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD @@ -1010,7 +1031,7 @@ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS ]) AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], @@ -1032,7 +1053,7 @@ _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD - elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then lt_cv_ld_force_load=yes else cat conftest.err >&AS_MESSAGE_LOG_FD @@ -1042,32 +1063,32 @@ ]) case $host_os in rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[[012]]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[[012]][[,.]]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then + if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= @@ -1087,29 +1108,29 @@ _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + if test yes = "$lt_cv_ld_force_load"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) else _LT_TAGVAR(whole_archive_flag_spec, $1)='' fi _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; + ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac - if test "$_lt_dar_can_shared" = "yes"; then + if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" m4_if([$1], [CXX], -[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then - _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" +[ if test yes != "$lt_cv_apple_cc_single_mod"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" fi ],[]) else @@ -1129,7 +1150,7 @@ # Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl -if test "${lt_cv_aix_libpath+set}" = set; then +if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], @@ -1147,7 +1168,7 @@ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib fi ]) aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) @@ -1167,8 +1188,8 @@ # ----------------------- # Find how we can fake an echo command that does not interpret backslash. # In particular, with Autoconf 2.60 or later we add some code to the start -# of the generated configure script which will find a shell with a builtin -# printf (which we can use as an echo command). +# of the generated configure script that will find a shell with a builtin +# printf (that we can use as an echo command). m4_defun([_LT_PROG_ECHO_BACKSLASH], [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO @@ -1196,10 +1217,10 @@ # Invoke $ECHO with all args, space-separated. func_echo_all () { - $ECHO "$*" + $ECHO "$*" } -case "$ECHO" in +case $ECHO in printf*) AC_MSG_RESULT([printf]) ;; print*) AC_MSG_RESULT([print -r]) ;; *) AC_MSG_RESULT([cat]) ;; @@ -1225,16 +1246,17 @@ AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], -[ --with-sysroot[=DIR] Search for dependent libraries within DIR - (or the compiler's sysroot if not specified).], +[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@], + [Search for dependent libraries within DIR (or the compiler's sysroot + if not specified).])], [], [with_sysroot=no]) dnl lt_sysroot will always be passed unquoted. We quote it here dnl in case the user passed a directory name. lt_sysroot= -case ${with_sysroot} in #( +case $with_sysroot in #( yes) - if test "$GCC" = yes; then + if test yes = "$GCC"; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( @@ -1244,14 +1266,14 @@ no|'') ;; #( *) - AC_MSG_RESULT([${with_sysroot}]) + AC_MSG_RESULT([$with_sysroot]) AC_MSG_ERROR([The sysroot must be an absolute path.]) ;; esac AC_MSG_RESULT([${lt_sysroot:-no}]) _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -[dependent libraries, and in which our libraries should be installed.])]) +[dependent libraries, and where our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- @@ -1259,31 +1281,33 @@ [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +test no = "$enable_libtool_lock" || enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) - HPUX_IA64_MODE="32" + HPUX_IA64_MODE=32 ;; *ELF-64*) - HPUX_IA64_MODE="64" + HPUX_IA64_MODE=64 ;; esac fi rm -rf conftest* ;; *-*-irix6*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" @@ -1312,9 +1336,46 @@ rm -rf conftest* ;; +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in @@ -1333,10 +1394,10 @@ ;; esac ;; - powerpc64le-*) + powerpc64le-*linux*) LD="${LD-ld} -m elf32lppclinux" ;; - powerpc64-*) + powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) @@ -1355,10 +1416,10 @@ x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; - powerpcle-*) + powerpcle-*linux*) LD="${LD-ld} -m elf64lppc" ;; - powerpc-*) + powerpc-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) @@ -1376,19 +1437,20 @@ *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" + SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then + if test yes != "$lt_cv_cc_needs_belf"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" + CFLAGS=$SAVE_CFLAGS fi ;; *-*solaris*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in @@ -1396,7 +1458,7 @@ case $lt_cv_prog_gnu_ld in yes*) case $host in - i?86-*-solaris*) + i?86-*-solaris*|x86_64-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) @@ -1405,7 +1467,7 @@ esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD="${LD-ld}_sol2" + LD=${LD-ld}_sol2 fi ;; *) @@ -1421,7 +1483,7 @@ ;; esac -need_locks="$enable_libtool_lock" +need_locks=$enable_libtool_lock ])# _LT_ENABLE_LOCK @@ -1440,11 +1502,11 @@ [echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -eq 0; then + if test 0 -eq "$ac_status"; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -ne 0; then + if test 0 -ne "$ac_status"; then lt_cv_ar_at_file=@ fi fi @@ -1452,7 +1514,7 @@ ]) ]) -if test "x$lt_cv_ar_at_file" = xno; then +if test no = "$lt_cv_ar_at_file"; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file @@ -1483,7 +1545,7 @@ if test -n "$RANLIB"; then case $host_os in - openbsd*) + bitrig* | openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) @@ -1519,7 +1581,7 @@ [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" + lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -1546,7 +1608,7 @@ $RM conftest* ]) -if test x"[$]$2" = xyes; then +if test yes = "[$]$2"; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) @@ -1568,7 +1630,7 @@ m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -1587,10 +1649,10 @@ fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS ]) -if test x"[$]$2" = xyes; then +if test yes = "[$]$2"; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) @@ -1611,7 +1673,7 @@ AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 - teststring="ABCD" + teststring=ABCD case $build_os in msdosdjgpp*) @@ -1651,7 +1713,7 @@ lt_cv_sys_max_cmd_len=8192; ;; - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` @@ -1702,22 +1764,22 @@ *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then + test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do + for i in 1 2 3 4 5 6 7 8; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough + test 17 != "$i" # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring @@ -1733,7 +1795,7 @@ ;; esac ]) -if test -n $lt_cv_sys_max_cmd_len ; then +if test -n "$lt_cv_sys_max_cmd_len"; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) @@ -1761,7 +1823,7 @@ # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl -if test "$cross_compiling" = yes; then : +if test yes = "$cross_compiling"; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -1808,9 +1870,9 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated +/* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif @@ -1836,7 +1898,7 @@ return status; }] _LT_EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in @@ -1857,7 +1919,7 @@ # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then +if test yes != "$enable_dlopen"; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown @@ -1867,44 +1929,52 @@ case $host_os in beos*) - lt_cv_dlopen="load_add_on" + lt_cv_dlopen=load_add_on lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; cygwin*) - lt_cv_dlopen="dlopen" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs= ;; darwin*) - # if libdl is installed we need to link against it + # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[ + lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + *) AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], + [lt_cv_dlopen=shl_load], [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld], [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], + [lt_cv_dlopen=dlopen], [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl], [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld], [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld]) ]) ]) ]) @@ -1913,21 +1983,21 @@ ;; esac - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else + if test no = "$lt_cv_dlopen"; then enable_dlopen=no + else + enable_dlopen=yes fi case $lt_cv_dlopen in dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - save_LIBS="$LIBS" + save_LIBS=$LIBS LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], @@ -1937,7 +2007,7 @@ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) - if test "x$lt_cv_dlopen_self" = xyes; then + if test yes = "$lt_cv_dlopen_self"; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl @@ -1947,9 +2017,9 @@ ]) fi - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS ;; esac @@ -2041,8 +2111,8 @@ m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) -hard_links="nottested" -if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then +hard_links=nottested +if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes @@ -2052,8 +2122,8 @@ ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + if test no = "$hard_links"; then + AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe]) need_locks=warn fi else @@ -2080,8 +2150,8 @@ _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl -AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", - [Define to the sub-directory in which libtool stores uninstalled libraries.]) +AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/", + [Define to the sub-directory where libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR @@ -2093,15 +2163,15 @@ _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || - test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then # We can hardcode non-existent directories. - if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + if test no != "$_LT_TAGVAR(hardcode_direct, $1)" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" && + test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else @@ -2115,12 +2185,12 @@ fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) -if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || - test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then +if test relink = "$_LT_TAGVAR(hardcode_action, $1)" || + test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then # Fast installation is not supported enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi @@ -2144,7 +2214,7 @@ # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) - if test -n "$STRIP" ; then + if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) @@ -2162,6 +2232,47 @@ ])# _LT_CMD_STRIPLIB +# _LT_PREPARE_MUNGE_PATH_LIST +# --------------------------- +# Make sure func_munge_path_list() is defined correctly. +m4_defun([_LT_PREPARE_MUNGE_PATH_LIST], +[[# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x@S|@2 in + x) + ;; + *:) + eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\" + ;; + x:*) + eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\" + ;; + *) + eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\" + ;; + esac +} +]])# _LT_PREPARE_PATH_LIST + + # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics @@ -2172,17 +2283,18 @@ m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; + mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in @@ -2198,28 +2310,35 @@ ;; esac # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. + # and add multilib dir if necessary... lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; + lt_foo = "/" $lt_i lt_foo; } else { lt_count--; } @@ -2233,7 +2352,7 @@ # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else @@ -2242,7 +2361,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext_cmds=".so" +shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -2259,14 +2378,17 @@ # flags to be left without arguments need_version=unknown +AC_ARG_VAR([LT_SYS_LIBRARY_PATH], +[User-defined run-time library search path.]) + case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' + soname_spec='$libname$release$shared_ext$major' ;; aix[[4-9]]*) @@ -2274,41 +2396,91 @@ need_lib_prefix=no need_version=no hardcode_into_libs=yes - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a[(]lib.so.V[)]' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac shlibpath_var=LIBPATH fi ;; @@ -2318,18 +2490,18 @@ powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) - library_names_spec='${libname}${shared_ext}' + library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; @@ -2337,8 +2509,8 @@ bsdi[[45]]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" @@ -2350,7 +2522,7 @@ cygwin* | mingw* | pw32* | cegcc*) version_type=windows - shrext_cmds=".dll" + shrext_cmds=.dll need_version=no need_lib_prefix=no @@ -2359,8 +2531,8 @@ # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ @@ -2376,17 +2548,17 @@ case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' @@ -2395,8 +2567,8 @@ *,cl*) # Native MSVC libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' + soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' case $build_os in mingw*) @@ -2423,7 +2595,7 @@ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` @@ -2436,8 +2608,8 @@ esac # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' @@ -2450,7 +2622,7 @@ *) # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac @@ -2463,8 +2635,8 @@ version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' @@ -2477,8 +2649,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -2496,12 +2668,13 @@ version_type=freebsd-$objformat case $version_type in freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac @@ -2531,10 +2704,10 @@ need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -2552,14 +2725,15 @@ dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' @@ -2567,8 +2741,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; @@ -2577,8 +2751,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... @@ -2591,8 +2765,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -2603,7 +2777,7 @@ case $host_os in nonstopux*) version_type=nonstopux ;; *) - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix @@ -2611,8 +2785,8 @@ esac need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= @@ -2631,8 +2805,8 @@ esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; @@ -2641,13 +2815,33 @@ dynamic_linker=no ;; +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -2672,7 +2866,12 @@ # before this can be enabled. hardcode_into_libs=yes - # Append ld.so.conf contents to the search path + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" @@ -2704,12 +2903,12 @@ need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH @@ -2719,7 +2918,7 @@ newsos6) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; @@ -2728,58 +2927,68 @@ version_type=qnx need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; -openbsd*) +openbsd* | bitrig*) version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" + sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no else - shlibpath_overrides_runpath=yes + need_version=yes fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' - shrext_cmds=".dll" + version_type=windows + shrext_cmds=.dll + need_version=no need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) @@ -2790,8 +2999,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes @@ -2801,11 +3010,11 @@ sunos4*) version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes @@ -2813,8 +3022,8 @@ sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) @@ -2835,24 +3044,24 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf + version_type=sco need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' @@ -2870,7 +3079,7 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes @@ -2878,8 +3087,8 @@ uts4*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -2888,20 +3097,30 @@ ;; esac AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no +test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then +if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) @@ -2934,39 +3153,41 @@ [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) -_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], - [Run-time system search path for libraries]) +_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2], + [Detected run-time system search path for libraries]) +_LT_DECL([], [configure_time_lt_sys_library_path], [2], + [Explicit LT_SYS_LIBRARY_PATH set during ./configure time]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- -# find a file program which can recognize shared library +# find a file program that can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -f "$ac_dir/$1"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : @@ -2989,11 +3210,11 @@ break fi done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else @@ -3011,7 +3232,7 @@ # _LT_PATH_MAGIC # -------------- -# find a file program which can recognize a shared library +# find a file program that can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then @@ -3038,16 +3259,16 @@ AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], + [test no = "$withval" || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld -if test "$GCC" = yes; then +if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw + # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; @@ -3061,7 +3282,7 @@ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done - test -z "$LD" && LD="$ac_prog" + test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. @@ -3072,37 +3293,37 @@ with_gnu_ld=unknown ;; esac -elif test "$with_gnu_ld" = yes; then +elif test yes = "$with_gnu_ld"; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd], +[if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi]) +rm -f conftest.i conftest2.i conftest.out]) +])# _LT_PATH_DD + + +# _LT_CMD_TRUNCATE +# ---------------- +# find command to truncate a binary pipe +m4_defun([_LT_CMD_TRUNCATE], +[m4_require([_LT_PATH_DD]) +AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin], +[printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"]) +_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1], + [Command to truncate a binary pipe]) +])# _LT_CMD_TRUNCATE + + # _LT_CHECK_MAGIC_METHOD # ---------------------- # how to check for library dependencies @@ -3188,13 +3446,13 @@ # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. +# 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. case $host_os in aix[[4-9]]*) @@ -3221,8 +3479,7 @@ # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else @@ -3318,8 +3575,8 @@ lt_cv_deplibs_check_method=pass_all ;; -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' @@ -3372,6 +3629,9 @@ tpf*) lt_cv_deplibs_check_method=pass_all ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; esac ]) @@ -3412,33 +3672,38 @@ AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. - lt_cv_path_NM="$NM" + lt_cv_path_NM=$NM else - lt_nm_to_check="${ac_tool_prefix}nm" + lt_nm_to_check=${ac_tool_prefix}nm if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" - break + break 2 ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" - break + break 2 ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but @@ -3449,21 +3714,21 @@ esac fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} fi]) -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) - DUMPBIN="$DUMPBIN -symbols" + DUMPBIN="$DUMPBIN -symbols -headers" ;; *) DUMPBIN=: @@ -3471,8 +3736,8 @@ esac fi AC_SUBST([DUMPBIN]) - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" + if test : != "$DUMPBIN"; then + NM=$DUMPBIN fi fi test -z "$NM" && NM=nm @@ -3518,8 +3783,8 @@ case $host_os in cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib @@ -3531,7 +3796,7 @@ ;; *) # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" + lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac ]) @@ -3558,13 +3823,28 @@ lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) -if test "x$lt_cv_path_mainfest_tool" != xyes; then +if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ])# _LT_PATH_MANIFEST_TOOL +# _LT_DLL_DEF_P([FILE]) +# --------------------- +# True iff FILE is a Windows DLL '.def' file. +# Keep in sync with func_dll_def_p in the libtool script +AC_DEFUN([_LT_DLL_DEF_P], +[dnl + test DEF = "`$SED -n dnl + -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace + -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments + -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl + -e q dnl Only consider the first "real" line + $1`" dnl +])# _LT_DLL_DEF_P + + # LT_LIB_M # -------- # check for math library @@ -3576,11 +3856,11 @@ # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw) AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) - AC_CHECK_LIB(m, cos, LIBM="-lm") + AC_CHECK_LIB(m, cos, LIBM=-lm) ;; esac AC_SUBST([LIBM]) @@ -3599,7 +3879,7 @@ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $cc_basename in nvcc*) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; @@ -3651,7 +3931,7 @@ symcode='[[ABCDGISTW]]' ;; hpux*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then symcode='[[ABCDEGRST]]' fi ;; @@ -3684,14 +3964,44 @@ symcode='[[ABCDGIRSTW]]' ;; esac +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" # Handle CRLF in mingw tool chain opt_cr= @@ -3709,21 +4019,24 @@ # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" @@ -3763,11 +4076,11 @@ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT@&t@_DLSYM_CONST -#elif defined(__osf__) +#elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT@&t@_DLSYM_CONST #else @@ -3793,7 +4106,7 @@ { { "@PROGRAM@", (void *) 0 }, _LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; @@ -3813,9 +4126,9 @@ mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" + LIBS=conftstm.$ac_objext CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS @@ -3836,7 +4149,7 @@ rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then + if test yes = "$pipe_works"; then break else lt_cv_sys_global_symbol_pipe= @@ -3863,12 +4176,16 @@ [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1], + [Transform the output of nm into a list of symbols to manually relocate]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([nm_interface], [lt_cv_nm_interface], [1], + [The name lister interface]) _LT_DECL([], [nm_file_list_spec], [1], [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS @@ -3884,17 +4201,18 @@ m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then + if test yes = "$GXX"; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; amigaos*) @@ -3905,8 +4223,8 @@ ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac @@ -3922,6 +4240,11 @@ # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac ;; darwin* | rhapsody*) # PIC is the default on this platform @@ -3971,7 +4294,7 @@ case $host_os in aix[[4-9]]*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else @@ -4012,14 +4335,14 @@ case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + if test ia64 != "$host_cpu"; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default @@ -4056,7 +4379,7 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) - # old Intel C++ for x86_64 which still supported -KPIC. + # old Intel C++ for x86_64, which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' @@ -4201,17 +4524,18 @@ fi ], [ - if test "$GCC" = yes; then + if test yes = "$GCC"; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; amigaos*) @@ -4222,8 +4546,8 @@ ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac @@ -4240,6 +4564,11 @@ # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac ;; darwin* | rhapsody*) @@ -4310,7 +4639,7 @@ case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else @@ -4318,11 +4647,30 @@ fi ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac ;; hpux9* | hpux10* | hpux11*) @@ -4338,7 +4686,7 @@ ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) @@ -4349,7 +4697,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. + # old Intel for x86_64, which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' @@ -4374,6 +4722,12 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) @@ -4471,7 +4825,7 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi @@ -4500,7 +4854,7 @@ fi ]) case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: + # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; @@ -4566,17 +4920,21 @@ case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi ;; pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds ;; cygwin* | mingw* | cegcc*) case $cc_basename in @@ -4625,9 +4983,9 @@ # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if @@ -4643,7 +5001,7 @@ # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. - if test "$GCC" != yes; then + if test yes != "$GCC"; then with_gnu_ld=no fi ;; @@ -4651,7 +5009,7 @@ # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; - openbsd*) + openbsd* | bitrig*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) @@ -4664,7 +5022,7 @@ # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility @@ -4686,24 +5044,24 @@ esac fi - if test "$lt_use_gnu_ld_interface" = yes; then + if test yes = "$lt_use_gnu_ld_interface"; then # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' + wlarc='$wl' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no - case `$LD -v 2>&1` in + case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... @@ -4716,7 +5074,7 @@ case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then + if test ia64 != "$host_cpu"; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 @@ -4735,7 +5093,7 @@ case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) @@ -4751,7 +5109,7 @@ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -4761,7 +5119,7 @@ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes @@ -4769,61 +5127,89 @@ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no - if test "$host_os" = linux-dietlibc; then + if test linux-dietlibc = "$host_os"; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no + && test no = "$tmp_diet" then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -4834,42 +5220,47 @@ lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac - _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in + tcc*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic' + ;; xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -4883,8 +5274,8 @@ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -4902,8 +5293,8 @@ _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -4915,7 +5306,7 @@ _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify @@ -4930,9 +5321,9 @@ # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -4949,15 +5340,15 @@ *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac - if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= @@ -4973,7 +5364,7 @@ # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported @@ -4981,34 +5372,57 @@ ;; aix[[4-9]]*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' - no_entry_flag="" + no_entry_flag= else # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then aix_use_runtimelinking=yes break fi done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi ;; esac @@ -5027,13 +5441,21 @@ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + _LT_TAGVAR(file_list_spec, $1)='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + ;; + esac - if test "$GCC" = yes; then + if test yes = "$GCC"; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` + collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then @@ -5052,62 +5474,80 @@ ;; esac shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' fi - _LT_TAGVAR(link_all_deplibs, $1)=no + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' else # not using gcc - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' else - shared_flag='${wl}-bM:SRE' + shared_flag='$wl-bM:SRE' fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' fi fi - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + if test ia64 = "$host_cpu"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' + if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' fi fi ;; @@ -5116,7 +5556,7 @@ case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) @@ -5146,16 +5586,17 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes @@ -5164,18 +5605,18 @@ # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' ;; *) # Assume MSVC wrapper @@ -5184,7 +5625,7 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. @@ -5234,33 +5675,33 @@ ;; hpux9*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test yes,no = "$GCC,$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes @@ -5268,25 +5709,25 @@ ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test yes,no = "$GCC,$with_gnu_ld"; then case $host_cpu in hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) m4_if($1, [], [ @@ -5294,14 +5735,14 @@ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) _LT_LINKER_OPTION([if $CC understands -b], _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in @@ -5312,7 +5753,7 @@ *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. @@ -5323,16 +5764,16 @@ ;; irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], [lt_cv_irix_exported_symbol], - [save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + [save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" AC_LINK_IFELSE( [AC_LANG_SOURCE( [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], @@ -5345,21 +5786,32 @@ end]])])], [lt_cv_irix_exported_symbol=yes], [lt_cv_irix_exported_symbol=no]) - LDFLAGS="$save_LDFLAGS"]) - if test "$lt_cv_irix_exported_symbol" = yes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + LDFLAGS=$save_LDFLAGS]) + if test yes = "$lt_cv_irix_exported_symbol"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi + _LT_TAGVAR(link_all_deplibs, $1)=no else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + _LT_TAGVAR(ld_shlibs, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out @@ -5374,7 +5826,7 @@ newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; @@ -5382,27 +5834,19 @@ *nto* | *qnx*) ;; - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' fi else _LT_TAGVAR(ld_shlibs, $1)=no @@ -5413,33 +5857,53 @@ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; osf3*) - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + if test yes = "$GCC"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -5450,24 +5914,24 @@ solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + wlarc='$wl' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' - _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + wlarc='$wl' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi @@ -5477,11 +5941,11 @@ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', + # but understands '-z linker_flag'. GCC discards it without '$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + if test yes = "$GCC"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi @@ -5491,10 +5955,10 @@ ;; sunos4*) - if test "x$host_vendor" = xsequent; then + if test sequent = "$host_vendor"; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -5543,43 +6007,43 @@ ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not + # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; @@ -5594,17 +6058,17 @@ ;; esac - if test x$host_vendor = xsni; then + if test sni = "$host_vendor"; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld @@ -5621,7 +6085,7 @@ # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then + if test yes,yes = "$GCC,$enable_shared"; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. @@ -5701,12 +6165,12 @@ _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes DIR into the resulting binary and the resulting library dependency is - "absolute", i.e impossible to change by setting ${shlibpath_var} if the + "absolute", i.e impossible to change by setting $shlibpath_var if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR @@ -5747,10 +6211,10 @@ # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. +# the compiler configuration to 'libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl -lt_save_CC="$CC" +lt_save_CC=$CC AC_LANG_PUSH(C) # Source file extension for C test sources. @@ -5790,18 +6254,18 @@ LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB - # Report which library types will actually be built + # Report what library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no + test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) - test "$enable_shared" = yes && enable_static=no + test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' @@ -5809,8 +6273,12 @@ ;; aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac fi ;; esac @@ -5818,13 +6286,13 @@ AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes + test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP -CC="$lt_save_CC" +CC=$lt_save_CC ])# _LT_LANG_C_CONFIG @@ -5832,14 +6300,14 @@ # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. +# the compiler configuration to 'libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then +if test -n "$CXX" && ( test no != "$CXX" && + ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || + (test g++ != "$CXX"))); then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes @@ -5881,7 +6349,7 @@ # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then +if test yes != "$_lt_caught_CXX_error"; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" @@ -5923,35 +6391,35 @@ if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately - if test "$GXX" = yes; then + if test yes = "$GXX"; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi - if test "$GXX" = yes; then + if test yes = "$GXX"; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + if test yes = "$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) - wlarc='${wl}' + wlarc='$wl' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi @@ -5987,18 +6455,30 @@ _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' - no_entry_flag="" + no_entry_flag= else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in @@ -6008,6 +6488,13 @@ ;; esac done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi ;; esac @@ -6026,13 +6513,21 @@ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + _LT_TAGVAR(file_list_spec, $1)='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + ;; + esac - if test "$GXX" = yes; then + if test yes = "$GXX"; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` + collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then @@ -6050,64 +6545,84 @@ fi esac shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag=$shared_flag' $wl-G' fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' else # not using gcc - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' else - shared_flag='${wl}-bM:SRE' + shared_flag='$wl-bM:SRE' fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' fi fi - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # The "-G" linker flag allows undefined symbols. + _LT_TAGVAR(no_undefined_flag, $1)='-bernotok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + if test ia64 = "$host_cpu"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' + if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared + # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' fi fi ;; @@ -6117,7 +6632,7 @@ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -6145,57 +6660,58 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -6206,6 +6722,34 @@ _LT_DARWIN_LINKER_FEATURES($1) ;; + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + dgux*) case $cc_basename in ec++*) @@ -6241,14 +6785,14 @@ ;; haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default @@ -6260,7 +6804,7 @@ _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -6269,11 +6813,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + if test yes = "$GXX"; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no @@ -6283,15 +6827,15 @@ ;; hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' ;; esac fi @@ -6317,13 +6861,13 @@ aCC*) case $host_cpu in hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists @@ -6334,20 +6878,20 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then case $host_cpu in hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -6362,22 +6906,22 @@ interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -6386,17 +6930,17 @@ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; @@ -6409,8 +6953,8 @@ # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. @@ -6419,10 +6963,10 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. @@ -6436,59 +6980,59 @@ # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac - _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' ;; cxx*) # Compaq C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -6502,18 +7046,18 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi ;; *) @@ -6521,10 +7065,10 @@ *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on @@ -6582,22 +7126,17 @@ _LT_TAGVAR(ld_shlibs, $1)=yes ;; - openbsd2*) - # C++ shared libraries are fairly broken - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else @@ -6613,9 +7152,9 @@ # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using @@ -6633,17 +7172,17 @@ cxx*) case $host in osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ + $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac @@ -6658,21 +7197,21 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + if test yes,no = "$GXX,$with_gnu_ld"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' case $host in osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists @@ -6718,9 +7257,9 @@ # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -6728,7 +7267,7 @@ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. + # but understands '-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; @@ -6745,30 +7284,30 @@ ;; gcx*) # Green Hills C++ Compiler - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if test yes,no = "$GXX,$with_gnu_ld"; then + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else - # g++ 2.7 appears to require `-G' NOT `-shared' on this + # g++ 2.7 appears to require '-G' NOT '-shared' on this # platform. - _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when @@ -6776,11 +7315,11 @@ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' ;; esac fi @@ -6789,52 +7328,52 @@ ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not + # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ - '"$_LT_TAGVAR(old_archive_cmds, $1)" + '"$_LT_TAGVAR(old_archive_cmds, $1)" _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ - '"$_LT_TAGVAR(reload_cmds, $1)" + '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; @@ -6865,10 +7404,10 @@ esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) - test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no - _LT_TAGVAR(GCC, $1)="$GXX" - _LT_TAGVAR(LD, $1)="$LD" + _LT_TAGVAR(GCC, $1)=$GXX + _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change @@ -6895,7 +7434,7 @@ lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes +fi # test yes != "$_lt_caught_CXX_error" AC_LANG_POP ])# _LT_LANG_CXX_CONFIG @@ -6917,13 +7456,14 @@ AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) func_stripname_cnf () { - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + case @S|@2 in + .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;; + *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;; esac } # func_stripname_cnf ])# _LT_FUNC_STRIPNAME_CNF + # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose @@ -7007,13 +7547,13 @@ pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in + case $prev$p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. - if test $p = "-L" || - test $p = "-R"; then + if test x-L = "$p" || + test x-R = "$p"; then prev=$p continue fi @@ -7029,16 +7569,16 @@ case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac - if test "$pre_test_object_deps_done" = no; then - case ${prev} in + if test no = "$pre_test_object_deps_done"; then + case $prev in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p else - _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p" fi ;; # The "-l" case would never come before the object being @@ -7046,9 +7586,9 @@ esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then - _LT_TAGVAR(postdeps, $1)="${prev}${p}" + _LT_TAGVAR(postdeps, $1)=$prev$p else - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p" fi fi prev= @@ -7063,15 +7603,15 @@ continue fi - if test "$pre_test_object_deps_done" = no; then + if test no = "$pre_test_object_deps_done"; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then - _LT_TAGVAR(predep_objects, $1)="$p" + _LT_TAGVAR(predep_objects, $1)=$p else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then - _LT_TAGVAR(postdep_objects, $1)="$p" + _LT_TAGVAR(postdep_objects, $1)=$p else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi @@ -7102,51 +7642,6 @@ _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC* | sunCC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; esac ]) @@ -7155,7 +7650,7 @@ esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then - _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) @@ -7175,10 +7670,10 @@ # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. +# to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_LANG_PUSH(Fortran 77) -if test -z "$F77" || test "X$F77" = "Xno"; then +if test -z "$F77" || test no = "$F77"; then _lt_disable_F77=yes fi @@ -7215,7 +7710,7 @@ # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_F77" != yes; then +if test yes != "$_lt_disable_F77"; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t @@ -7237,7 +7732,7 @@ _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. - lt_save_CC="$CC" + lt_save_CC=$CC lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} @@ -7251,21 +7746,25 @@ AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no + test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) - test "$enable_shared" = yes && enable_static=no + test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac fi ;; esac @@ -7273,11 +7772,11 @@ AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes + test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) - _LT_TAGVAR(GCC, $1)="$G77" - _LT_TAGVAR(LD, $1)="$LD" + _LT_TAGVAR(GCC, $1)=$G77 + _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change @@ -7294,9 +7793,9 @@ fi # test -n "$compiler" GCC=$lt_save_GCC - CC="$lt_save_CC" - CFLAGS="$lt_save_CFLAGS" -fi # test "$_lt_disable_F77" != yes + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test yes != "$_lt_disable_F77" AC_LANG_POP ])# _LT_LANG_F77_CONFIG @@ -7306,11 +7805,11 @@ # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. +# to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_LANG_PUSH(Fortran) -if test -z "$FC" || test "X$FC" = "Xno"; then +if test -z "$FC" || test no = "$FC"; then _lt_disable_FC=yes fi @@ -7347,7 +7846,7 @@ # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_FC" != yes; then +if test yes != "$_lt_disable_FC"; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t @@ -7369,7 +7868,7 @@ _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. - lt_save_CC="$CC" + lt_save_CC=$CC lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} @@ -7385,21 +7884,25 @@ AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no + test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) - test "$enable_shared" = yes && enable_static=no + test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac fi ;; esac @@ -7407,11 +7910,11 @@ AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes + test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) - _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" - _LT_TAGVAR(LD, $1)="$LD" + _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu + _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change @@ -7431,7 +7934,7 @@ GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS -fi # test "$_lt_disable_FC" != yes +fi # test yes != "$_lt_disable_FC" AC_LANG_POP ])# _LT_LANG_FC_CONFIG @@ -7441,7 +7944,7 @@ # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. +# to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE @@ -7475,7 +7978,7 @@ CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" +_LT_TAGVAR(LD, $1)=$LD _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. @@ -7512,7 +8015,7 @@ # -------------------------- # Ensure that the configuration variables for the GNU Go compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. +# to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_GO_CONFIG], [AC_REQUIRE([LT_PROG_GO])dnl AC_LANG_SAVE @@ -7546,7 +8049,7 @@ CFLAGS=$GOFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" +_LT_TAGVAR(LD, $1)=$LD _LT_CC_BASENAME([$compiler]) # Go did not exist at the time GCC didn't implicitly link libc in. @@ -7583,7 +8086,7 @@ # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. +# to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE @@ -7599,7 +8102,7 @@ lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" +lt_simple_link_test_code=$lt_simple_compile_test_code # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER @@ -7609,7 +8112,7 @@ _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. -lt_save_CC="$CC" +lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= @@ -7638,7 +8141,7 @@ [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) @@ -7749,7 +8252,7 @@ # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue + test ! -f "$lt_ac_sed" && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in @@ -7766,9 +8269,9 @@ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break + test 10 -lt "$lt_ac_count" && break lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then + if test "$lt_ac_count" -gt "$lt_ac_max"; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi @@ -7792,27 +8295,7 @@ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], -[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -AC_MSG_RESULT([$xsi_shell]) -_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) - -AC_MSG_CHECKING([whether the shell understands "+="]) -lt_shell_append=no -( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -AC_MSG_RESULT([$lt_shell_append]) -_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false @@ -7836,102 +8319,9 @@ ])# _LT_CHECK_SHELL_FEATURES -# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) -# ------------------------------------------------------ -# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and -# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. -m4_defun([_LT_PROG_FUNCTION_REPLACE], -[dnl { -sed -e '/^$1 ()$/,/^} # $1 /c\ -$1 ()\ -{\ -m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) -} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: -]) - - -# _LT_PROG_REPLACE_SHELLFNS -# ------------------------- -# Replace existing portable implementations of several shell functions with -# equivalent extended shell implementations where those features are available.. -m4_defun([_LT_PROG_REPLACE_SHELLFNS], -[if test x"$xsi_shell" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"}]) - - _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl - func_split_long_opt_name=${1%%=*} - func_split_long_opt_arg=${1#*=}]) - - _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl - func_split_short_opt_arg=${1#??} - func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) - - _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) - - _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) - - _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) -fi - -if test x"$lt_shell_append" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) - - _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl - func_quote_for_eval "${2}" -dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ - eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) -fi -]) - # _LT_PATH_CONVERSION_FUNCTIONS # ----------------------------- -# Determine which file name conversion functions should be used by +# Determine what file name conversion functions should be used by # func_to_host_file (and, implicitly, by func_to_host_path). These are needed # for certain cross-compile configurations and native mingw. m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], diff -Nru parlatype-1.5.4/m4/lt~obsolete.m4 parlatype-1.5.6/m4/lt~obsolete.m4 --- parlatype-1.5.4/m4/lt~obsolete.m4 2017-10-12 10:55:59.000000000 +0000 +++ parlatype-1.5.6/m4/lt~obsolete.m4 2018-04-09 18:22:54.000000000 +0000 @@ -1,6 +1,7 @@ # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # -# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software +# Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives @@ -11,7 +12,7 @@ # These exist entirely to fool aclocal when bootstrapping libtool. # -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN), # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # @@ -25,7 +26,7 @@ # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until diff -Nru parlatype-1.5.4/m4/ltoptions.m4 parlatype-1.5.6/m4/ltoptions.m4 --- parlatype-1.5.4/m4/ltoptions.m4 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/m4/ltoptions.m4 2018-04-09 18:22:53.000000000 +0000 @@ -1,14 +1,14 @@ # Helper functions for option handling. -*- Autoconf -*- # -# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software +# Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. -# serial 7 ltoptions.m4 +# serial 8 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) @@ -29,7 +29,7 @@ [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), - [m4_warning([Unknown $1 option `$2'])])[]dnl + [m4_warning([Unknown $1 option '$2'])])[]dnl ]) @@ -75,13 +75,15 @@ dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither - dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl 'shared' nor 'disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], - [_LT_ENABLE_FAST_INSTALL]) + [_LT_ENABLE_FAST_INSTALL]) + _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4], + [_LT_WITH_AIX_SONAME([aix])]) ]) ])# _LT_SET_OPTIONS @@ -112,7 +114,7 @@ [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `dlopen' option into LT_INIT's first parameter.]) +put the 'dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: @@ -148,7 +150,7 @@ _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `win32-dll' option into LT_INIT's first parameter.]) +put the 'win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: @@ -157,9 +159,9 @@ # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- -# implement the --enable-shared flag, and supports the `shared' and -# `disable-shared' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +# implement the --enable-shared flag, and supports the 'shared' and +# 'disable-shared' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], @@ -172,14 +174,14 @@ *) enable_shared=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_shared=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) @@ -211,9 +213,9 @@ # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- -# implement the --enable-static flag, and support the `static' and -# `disable-static' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +# implement the --enable-static flag, and support the 'static' and +# 'disable-static' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], @@ -226,14 +228,14 @@ *) enable_static=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_static=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) @@ -265,9 +267,9 @@ # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- -# implement the --enable-fast-install flag, and support the `fast-install' -# and `disable-fast-install' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +# implement the --enable-fast-install flag, and support the 'fast-install' +# and 'disable-fast-install' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], @@ -280,14 +282,14 @@ *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) @@ -304,14 +306,14 @@ [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `fast-install' option into LT_INIT's first parameter.]) +the 'fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `disable-fast-install' option into LT_INIT's first parameter.]) +the 'disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: @@ -319,11 +321,64 @@ dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) +# _LT_WITH_AIX_SONAME([DEFAULT]) +# ---------------------------------- +# implement the --with-aix-soname flag, and support the `aix-soname=aix' +# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT +# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'. +m4_define([_LT_WITH_AIX_SONAME], +[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl +shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[[5-9]]*,yes) + AC_MSG_CHECKING([which variant of shared library versioning to provide]) + AC_ARG_WITH([aix-soname], + [AS_HELP_STRING([--with-aix-soname=aix|svr4|both], + [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])], + [case $withval in + aix|svr4|both) + ;; + *) + AC_MSG_ERROR([Unknown argument to --with-aix-soname]) + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname], + [AC_CACHE_VAL([lt_cv_with_aix_soname], + [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT) + with_aix_soname=$lt_cv_with_aix_soname]) + AC_MSG_RESULT([$with_aix_soname]) + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + +_LT_DECL([], [shared_archive_member_spec], [0], + [Shared archive member basename, for filename based shared library versioning on AIX])dnl +])# _LT_WITH_AIX_SONAME + +LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])]) +LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])]) +LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])]) + + # _LT_WITH_PIC([MODE]) # -------------------- -# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# implement the --with-pic flag, and support the 'pic-only' and 'no-pic' # LT_INIT options. -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], @@ -334,19 +389,17 @@ *) pic_mode=default # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for lt_pkg in $withval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac], - [pic_mode=default]) - -test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + [pic_mode=m4_default([$1], [default])]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC @@ -359,7 +412,7 @@ [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `pic-only' option into LT_INIT's first parameter.]) +put the 'pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: diff -Nru parlatype-1.5.4/m4/ltsugar.m4 parlatype-1.5.6/m4/ltsugar.m4 --- parlatype-1.5.4/m4/ltsugar.m4 2017-10-12 10:55:58.000000000 +0000 +++ parlatype-1.5.6/m4/ltsugar.m4 2018-04-09 18:22:53.000000000 +0000 @@ -1,6 +1,7 @@ # ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software +# Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives @@ -33,7 +34,7 @@ # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support -# Autoconf-2.59 which quotes differently. +# Autoconf-2.59, which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], @@ -44,7 +45,7 @@ # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different diff -Nru parlatype-1.5.4/m4/ltversion.m4 parlatype-1.5.6/m4/ltversion.m4 --- parlatype-1.5.4/m4/ltversion.m4 2017-10-12 10:55:59.000000000 +0000 +++ parlatype-1.5.6/m4/ltversion.m4 2018-04-09 18:22:53.000000000 +0000 @@ -1,6 +1,6 @@ # ltversion.m4 -- version numbers -*- Autoconf -*- # -# Copyright (C) 2004 Free Software Foundation, Inc. +# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives @@ -9,15 +9,15 @@ # @configure_input@ -# serial 3337 ltversion.m4 +# serial 4179 ltversion.m4 # This file is part of GNU Libtool -m4_define([LT_PACKAGE_VERSION], [2.4.2]) -m4_define([LT_PACKAGE_REVISION], [1.3337]) +m4_define([LT_PACKAGE_VERSION], [2.4.6]) +m4_define([LT_PACKAGE_REVISION], [2.4.6]) AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.4.2' -macro_revision='1.3337' +[macro_version='2.4.6' +macro_revision='2.4.6' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) diff -Nru parlatype-1.5.4/Makefile.in parlatype-1.5.6/Makefile.in --- parlatype-1.5.4/Makefile.in 2017-11-19 15:49:26.000000000 +0000 +++ parlatype-1.5.6/Makefile.in 2018-08-17 10:45:09.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -14,7 +14,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -78,11 +88,6 @@ build_triplet = @build@ host_triplet = @host@ subdir = . -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/configure $(am__configure_deps) \ - $(srcdir)/config.h.in COPYING INSTALL NEWS compile \ - config.guess config.rpath config.sub depcomp install-sh \ - missing ltmain.sh ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ @@ -91,6 +96,8 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d @@ -154,6 +161,9 @@ CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + ABOUT-NLS COPYING INSTALL NEWS compile config.guess \ + config.rpath config.sub depcomp install-sh ltmain.sh missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) @@ -216,7 +226,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ @@ -267,6 +276,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -349,6 +359,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -401,7 +412,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -632,15 +642,15 @@ $(am__post_remove_distdir) dist-tarZ: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) @@ -676,17 +686,17 @@ esac chmod -R a-w $(distdir) chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_inst + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=.. --prefix="$$dc_install_base" \ + --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ @@ -866,6 +876,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # A few maintainer make targets diff -Nru parlatype-1.5.4/missing parlatype-1.5.6/missing --- parlatype-1.5.4/missing 2017-10-12 10:56:12.000000000 +0000 +++ parlatype-1.5.6/missing 2018-04-09 18:23:15.000000000 +0000 @@ -3,7 +3,7 @@ scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify diff -Nru parlatype-1.5.4/NEWS parlatype-1.5.6/NEWS --- parlatype-1.5.4/NEWS 2017-11-19 09:32:29.000000000 +0000 +++ parlatype-1.5.6/NEWS 2018-08-17 10:48:14.000000000 +0000 @@ -1,4 +1,42 @@ -Overview of Changes in Parlatype 1.5.3 – 2017-11-19 +Overview of Changes in Parlatype 1.5.6 – 2018-08-17 +=================================================== + +* Animate scrolling when using keybindings +* Change desktop entry category to Audio/Video instead of Utilities +* Fix a build warning on most architectures other than amd64 +* New or updated translations: + - fr: Georgelemental + + +Overview of Changes in Parlatype 1.5.5 – 2018-06-16 +=================================================== + +* New: Progress Dialog has now a countdown timer (estimated time left) +* New: Scroll with vertical scrollbar, too; contributed by Rinat Ibragimov +* New: Zoom in/out of waveform with Ctrl key pressed and scrolling +* New: Add shortcuts for play, jump back, jump forward, fix #27 + - Ctrl + space: play/pause + - Ctrl + arrow-left: jump back + - Ctrl + arrow-right: jump forward +* New: Increase max. possible speed to 2.0, fix #33 +* New: "Insert timestamp" only active if there is a valid timestamp +* Various fixes of waveform and cursor display after changing waveform's resolution, switching text direction (for right-to-left languages), and selections in right-to-left layouts +* Fix compilation on hurd-i386 and kfreebsd-* +* New or updated translations: + - ar: Ahmed Shubbar + - ca: Adolfo Jayme + - de: Gabor Karsay + - en_GB: Andi Chandler + - es: Adolfo Jayme + - fi: Jiri Grönroos + - fr: yeKcim + - ja: Shinichirou Yamada + - lt: Moo + - pl: Piotr Drąg + - sv: Tommy Brunn + + +Overview of Changes in Parlatype 1.5.4 – 2017-11-19 =================================================== * Fix #20: fix usage of media keys – again, now without regressions diff -Nru parlatype-1.5.4/po/ar.po parlatype-1.5.6/po/ar.po --- parlatype-1.5.4/po/ar.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/po/ar.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,391 @@ +# Arabic translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" +"POT-Creation-Date: 2018-06-04 13:39+0200\n" +"PO-Revision-Date: 2017-11-27 15:26+0000\n" +"Last-Translator: Ahmed Shubbar \n" +"Language-Team: Arabic \n" +"Language: ar\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n % 100 >= " +"3 && n % 100 <= 10 ? 3 : n % 100 >= 11 && n % 100 <= 99 ? 4 : 5;\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 +#: ../src/resources/window-headerbar.ui.h:1 +msgid "Parlatype" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 +msgid "Media player for manual speech transcription" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 +msgid "" +"Parlatype is an easy to use media player. Its main purpose is to help you " +"transcribing speech." +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 +msgid "Transcription utility" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +msgid "Transcription;" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "" + +#: ../src/main.c:36 +msgid "Fatal error" +msgstr "" + +#: ../src/main.c:40 +#, c-format +msgid "" +"Parlatype needs GStreamer 1.x to run. Please check your installation of " +"GStreamer and make sure you have the \"Good Plugins\" installed.\n" +"Parlatype will quit now, it received this error message: %s" +msgstr "" + +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "" + +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 +msgid "Recent Files" +msgstr "الملفات الحديثة" + +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 +msgid "_Cancel" +msgstr "_إلغاء" + +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 +msgid "_Open" +msgstr "_فتح" + +#: ../src/pt-app.c:90 ../src/pt-app.c:146 +msgid "All files" +msgstr "كل الملفّات" + +#: ../src/pt-app.c:131 +msgid "Open Audio File" +msgstr "أفتح ملف صوت" + +#: ../src/pt-app.c:145 +msgid "Audio files" +msgstr "ملفات صوت" + +#. Translators: %s is a detailed error message +#: ../src/pt-app.c:202 +#, c-format +msgid "Error opening help: %s" +msgstr "Error opening help: %s" + +#. Translators: This is part of the about box, followed by the +#. copyright holders of code from other projects. Instead of +#. "including" it could also say "with" or just "Code from +#. other projects:" +#: ../src/pt-app.c:220 +msgid "Including code from other projects:" +msgstr "Including code from other projects:" + +#: ../src/pt-app.c:238 +msgid "A basic transcription utility" +msgstr "أداة إملاء اساسية" + +#: ../src/pt-app.c:242 +msgid "translator-credits" +msgstr "" +"Launchpad Contributions:\n" +" Ahmed Shubbar https://launchpad.net/~ahmed-shubbar" + +#: ../src/pt-app.c:424 +#, c-format +msgid "" +"Warning: Parlatype handles only one file at a time. The other files are " +"ignored.\n" +msgstr "" +"تحذير: بارلاتايب يفتح ملف واحد فقط في أي وقت. الملف الآخر سيتم تجاهله.\n" + +#. Translators: This is a time format, like "2:05:30" for 2 +#. hours, 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-goto-dialog.c:49 +#, c-format +msgctxt "long time format" +msgid "%d:%02d:%02d" +msgstr "%d:%02d:%02d" + +#. Translators: This is part of the Preferences dialog +#. or the "Go to ..." dialog. There is a label like +#. "Jump back:", "Jump forward:", "Jump back on pause:" +#. or "Go to position:" before. +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 +msgid "second" +msgid_plural "seconds" +msgstr[0] "ثانية" +msgstr[1] "ثواني" +msgstr[2] "ثانيتان" +msgstr[3] "ثوانِ" + +#: ../src/pt-preferences.c:193 +msgid "_Close" +msgstr "_إغلاق" + +#: ../src/pt-window.c:296 +#, c-format +msgid "Jump back 1 second" +msgid_plural "Jump back %d seconds" +msgstr[0] "أرجع ثانية واحدة" +msgstr[1] "أرجع %d ثانية" +msgstr[2] "أرجع %d ثانية" +msgstr[3] "أرجع %d ثانية" +msgstr[4] "أرجع %d ثانية" +msgstr[5] "أرجع %d ثانية" + +#: ../src/pt-window.c:311 +#, c-format +msgid "Jump forward 1 second" +msgid_plural "Jump forward %d seconds" +msgstr[0] "تقدم ثانية واحدة" +msgstr[1] "تقدم %d ثانية" +msgstr[2] "تقدم %d ثانية" +msgstr[3] "تقدم %d ثانية" +msgstr[4] "تقدم %d ثانية" +msgstr[5] "تقدم %d ثانية" + +#: ../src/pt-window.c:328 +msgid "Pause" +msgstr "" + +#: ../src/pt-window.c:331 +#, c-format +msgid "Pause and rewind 1 second" +msgid_plural "Pause and rewind %d seconds" +msgstr[0] "" +msgstr[1] "" + +#: ../src/pt-window.c:338 +msgid "Start playing" +msgstr "إبدأ التشغيل" + +#: ../src/pt-window.c:991 +msgid "View follows cursor" +msgstr "المشهد يتبع المؤشر" + +#: ../src/pt-window.c:993 +msgid "Click to follow cursor" +msgstr "اضغط لتتبع المؤشر" + +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 +msgid "Go to ..." +msgstr "أذهب الى ..." + +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "" + +#: ../src/resources/goto-dialog.ui.h:4 +msgid "Go to position:" +msgstr "أذهب الى موقع:" + +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "عام" + +#: ../src/resources/help-overlay.ui.h:2 +msgid "Open a media file" +msgstr "افتح ملف وسائط" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +msgid "Show/hide action menu" +msgstr "افتح/أغلق قائمة الإجراءات" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "خروج" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "الشكل الموجي" + +#: ../src/resources/help-overlay.ui.h:7 +msgid "Play/Pause" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:8 +#, fuzzy +msgid "Jump back" +msgstr "أرجع ثانية واحدة" + +#: ../src/resources/help-overlay.ui.h:9 +#, fuzzy +msgid "Jump forward" +msgstr "تقدم ثانية واحدة" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "تكبير" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + +#: ../src/resources/menus.ui.h:1 +msgid "Open File" +msgstr "" + +#: ../src/resources/menus.ui.h:3 +msgid "Preferences" +msgstr "" + +#: ../src/resources/menus.ui.h:4 +msgid "_Keyboard Shortcuts" +msgstr "" + +#: ../src/resources/menus.ui.h:6 +msgid "Info" +msgstr "" + +#: ../src/resources/menus.ui.h:8 +msgid "Copy timestamp" +msgstr "" + +#: ../src/resources/menus.ui.h:9 +msgid "Insert timestamp" +msgstr "" + +#: ../src/resources/menus.ui.h:11 +msgid "_File" +msgstr "" + +#: ../src/resources/menus.ui.h:12 +msgid "_Edit" +msgstr "" + +#: ../src/resources/menus.ui.h:13 +msgid "_Help" +msgstr "" + +#: ../src/resources/preferences.ui.h:1 +msgid "Parlatype Preferences" +msgstr "" + +#: ../src/resources/preferences.ui.h:2 +msgid "_Pixels per second:" +msgstr "" + +#: ../src/resources/preferences.ui.h:3 +msgid "Show _time scale" +msgstr "" + +#. Resolution of the waveform image +#: ../src/resources/preferences.ui.h:5 +msgid "Resolution" +msgstr "" + +#. A section in preferences, how to display the waveform. +#: ../src/resources/preferences.ui.h:7 +msgid "Display" +msgstr "" + +#: ../src/resources/preferences.ui.h:8 +msgid "_Moving cursor" +msgstr "" + +#: ../src/resources/preferences.ui.h:9 +msgid "_Fixed cursor" +msgstr "" + +#: ../src/resources/preferences.ui.h:11 +msgid "Jump back on _pause:" +msgstr "" + +#: ../src/resources/preferences.ui.h:12 +msgid "Jump _back:" +msgstr "" + +#: ../src/resources/preferences.ui.h:13 +msgid "Jump _forward:" +msgstr "" + +#: ../src/resources/preferences.ui.h:14 +msgid "Controls" +msgstr "" + +#: ../src/resources/preferences.ui.h:15 +msgid "Remember _size" +msgstr "" + +#: ../src/resources/preferences.ui.h:16 +msgid "Remember _position" +msgstr "" + +#: ../src/resources/preferences.ui.h:17 +msgid "Start on _top" +msgstr "" + +#: ../src/resources/preferences.ui.h:18 +msgid "Window" +msgstr "" + +#: ../src/resources/window.ui.h:2 +msgid "Speed:" +msgstr "" + +#: ../src/resources/window-headerbar.ui.h:3 +msgid "Open a file" +msgstr "" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "" diff -Nru parlatype-1.5.4/po/ca.po parlatype-1.5.6/po/ca.po --- parlatype-1.5.4/po/ca.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/ca.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,29 +7,30 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-16 21:45+0100\n" -"PO-Revision-Date: 2017-01-20 20:15+0000\n" -"Last-Translator: VPablo \n" +"POT-Creation-Date: 2018-06-04 14:01+0200\n" +"PO-Revision-Date: 2018-01-24 10:58+0000\n" +"Last-Translator: Adolfo Jayme \n" "Language-Team: Catalan \n" +"Language: ca\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Launchpad-Export-Date: 2017-01-20 21:44+0000\n" -"X-Generator: Launchpad (build 18302)\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 -#: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Reproductor de mitjans per a la transcripció manual de veu" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." @@ -37,19 +38,27 @@ "Parlatype és un reproductor de mitjans fàcil d'usar. El seu principal " "propòsit és ajudar a transcriure discursos." -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Utilitat de transcripció" -#: ../src/main.c:42 -msgid "Show the application's version" -msgstr "Mostra la versió de l'aplicació" +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +msgid "Transcription;" +msgstr "Transcripció;" -#: ../src/main.c:58 +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "" + +#: ../src/main.c:36 msgid "Fatal error" msgstr "Error greu" -#: ../src/main.c:62 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " @@ -60,44 +69,37 @@ "instal·lació de GStreamer i fixe's que te el \"Goog plugins\" instal·lat.\n" "Parlatype eixirà ara, ha rebut el següent missatge:%s" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:84 -msgid "[FILE]" -msgstr "[FITXER]" - -#: ../src/main.c:87 -msgid "Minimal audio player for manual speech transcription" -msgstr "Reproductor d'àudio mínim per transcripció manual de discursos" +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Mostra la versió de l'aplicació" -#: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Fitxers recents" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Cancel·la" -#: ../src/pt-app.c:60 ../src/pt-app.c:117 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Obre" -#: ../src/pt-app.c:72 ../src/pt-app.c:128 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Tots els fitxers" -#: ../src/pt-app.c:113 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Obre Fitxer d'Àudio" -#: ../src/pt-app.c:127 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "Fitxers d'àudio" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:176 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Error obrint ajuda: %s" @@ -106,21 +108,22 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:194 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Inclou codi d'altres projectes:" -#: ../src/pt-app.c:212 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Una utilitat bàsica de transcripció" -#: ../src/pt-app.c:216 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" +" Adolfo Jayme https://launchpad.net/~fitojb\n" " VPablo https://launchpad.net/~villumar" -#: ../src/pt-app.c:369 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -143,62 +146,137 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "segon" msgstr[1] "segons" -#: ../src/pt-preferences.c:164 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Tanca" -#: ../src/pt-window.c:218 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Torna 1 segon enrere" msgstr[1] "Torna %d segons enrere" -#: ../src/pt-window.c:232 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Avança 1 segon" msgstr[1] "Avança %d segons" -#: ../src/pt-window.c:247 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Pausa" -#: ../src/pt-window.c:250 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pausa i torna 1 segon enrere" msgstr[1] "Pausa i torna %d segons enrere" -#: ../src/pt-window.c:256 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Inicia la reproducció" -#: ../src/pt-window.c:727 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "La vista segueix el cursor" -#: ../src/pt-window.c:729 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Clica per seguir el cursor" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Anar a ..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_D'acord" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Anar a la posició:" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +msgid "Open a media file" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +msgid "Show/hide action menu" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Surt" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "Forma d'ona" + +#: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Pausa" + +#: ../src/resources/help-overlay.ui.h:8 +#, fuzzy +msgid "Jump back" +msgstr "Torna _enrere:" + +#: ../src/resources/help-overlay.ui.h:9 +#, fuzzy +msgid "Jump forward" +msgstr "_Avança:" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Ajuda" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Obre el fitxer" @@ -208,34 +286,30 @@ msgstr "Preferències" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "Ajuda" +msgid "_Keyboard Shortcuts" +msgstr "" -#: ../src/resources/menus.ui.h:5 +#: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Info" -#: ../src/resources/menus.ui.h:6 -msgid "Quit" -msgstr "Surt" - -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Còpia marca de temps" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Inserta marca de temps" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Fitxer" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Edita" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Ajuda" @@ -269,10 +343,6 @@ msgid "_Fixed cursor" msgstr "Cursor _fixe" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "Forma d'ona" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Torna enrere quan es _pause:" @@ -290,14 +360,18 @@ msgstr "Controls" #: ../src/resources/preferences.ui.h:15 +msgid "Remember _size" +msgstr "" + +#: ../src/resources/preferences.ui.h:16 msgid "Remember _position" msgstr "Recorda _posició" -#: ../src/resources/preferences.ui.h:16 +#: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "Comença a la par_t superior" -#: ../src/resources/preferences.ui.h:17 +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Finestra" @@ -305,6 +379,10 @@ msgid "Speed:" msgstr "Velocitat:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Obre un fitxer" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Reprodueix" diff -Nru parlatype-1.5.4/po/de.po parlatype-1.5.6/po/de.po --- parlatype-1.5.4/po/de.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/de.po 2018-06-17 20:35:03.000000000 +0000 @@ -1,22 +1,22 @@ # German translations for parlatype. # Copyright (C) 2016 Gabor Karsay # This file is distributed under the same license as the parlatype package. -# Gabor Karsay , 2016, 2017. +# Gabor Karsay , 2016, 2017, 2018. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-07-26 17:29+0200\n" -"PO-Revision-Date: 2017-07-26 17:29+0200\n" -"Last-Translator: Gabor Karsay \n" +"POT-Creation-Date: 2018-02-28 23:05+0100\n" +"PO-Revision-Date: 2018-02-28 23:11+0100\n" +"Last-Translator: Gabor Karsay \n" "Language-Team: Deutsch <>\n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Gtranslator 2.91.7\n" +"Plural-Forms: nplurals=2; plural=(n != 1)\n" +"X-Generator: Gtranslator 2.91.6\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 @@ -78,11 +78,12 @@ msgid "Recent Files" msgstr "Zuletzt geöffnete Dateien" -#: ../src/pt-app.c:77 ../src/pt-app.c:134 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Abbrechen" #: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Öffnen" @@ -120,7 +121,7 @@ msgid "translator-credits" msgstr "Gabor Karsay " -#: ../src/pt-app.c:416 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -143,51 +144,51 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 -#: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "Sekunde" msgstr[1] "Sekunden" -#: ../src/pt-preferences.c:189 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Schließen" -#: ../src/pt-window.c:274 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Eine Sekunde zurückspringen" msgstr[1] "%d Sekunden zurückspringen" -#: ../src/pt-window.c:289 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "1 Sekunde vorwärtsspringen" msgstr[1] "%d Sekunden vorwärtsspringen" -#: ../src/pt-window.c:306 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Wiedergabe unterbrechen" -#: ../src/pt-window.c:309 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Wiedergabe unterbrechen und 1 Sekunde zurückspulen" msgstr[1] "Wiedergabe unterbrechen und %d Sekunden zurückspulen" -#: ../src/pt-window.c:316 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Wiedergabe starten" -#: ../src/pt-window.c:817 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "Ansicht folgt dem Cursor" -#: ../src/pt-window.c:819 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Klicken Sie hier, um dem Cursor zu folgen" @@ -195,7 +196,11 @@ msgid "Go to ..." msgstr "Gehe zu …" -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_OK" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Gehe zu Position:" @@ -224,34 +229,46 @@ msgstr "Wellenform" #: ../src/resources/help-overlay.ui.h:7 -msgid "Open “Go to” dialog" -msgstr "»Gehe zu«-Dialog öffnen" +msgid "Play/Pause" +msgstr "Wiedergabe/Pause" #: ../src/resources/help-overlay.ui.h:8 +msgid "Jump back" +msgstr "Zurückspringen" + +#: ../src/resources/help-overlay.ui.h:9 +msgid "Jump forward" +msgstr "Vorwärts springen" + +#: ../src/resources/help-overlay.ui.h:10 msgid "Zoom in" msgstr "Hineinzoomen" -#: ../src/resources/help-overlay.ui.h:9 +#: ../src/resources/help-overlay.ui.h:11 msgid "Zoom out" msgstr "Hinauszoomen" -#: ../src/resources/help-overlay.ui.h:10 +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "»Gehe zu«-Dialog öffnen" + +#: ../src/resources/help-overlay.ui.h:13 msgid "Copy timestamp to clipboard" msgstr "Zeitstempel in die Zwischenablage kopieren" -#: ../src/resources/help-overlay.ui.h:11 +#: ../src/resources/help-overlay.ui.h:14 msgid "Go to timestamp in clipboard" msgstr "Zu Zeitstempel aus Zwischenablage gehen" -#: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "Hilfe" -#: ../src/resources/help-overlay.ui.h:13 +#: ../src/resources/help-overlay.ui.h:16 msgid "Show help" msgstr "Hilfe anzeigen" -#: ../src/resources/help-overlay.ui.h:14 +#: ../src/resources/help-overlay.ui.h:17 msgid "Show keyboard shortcuts" msgstr "Tastenkürzel anzeigen" @@ -357,10 +374,14 @@ msgid "Speed:" msgstr "Geschwindigkeit:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Eine Datei öffnen" +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Wiedergabe" + #, fuzzy #~ msgid "Open a document" #~ msgstr "Eine Datei öffnen" diff -Nru parlatype-1.5.4/po/en_GB.po parlatype-1.5.6/po/en_GB.po --- parlatype-1.5.4/po/en_GB.po 2017-11-10 15:36:38.000000000 +0000 +++ parlatype-1.5.6/po/en_GB.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,16 +7,17 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-07-26 18:17+0200\n" -"PO-Revision-Date: 2017-10-17 18:57+0000\n" +"POT-Creation-Date: 2018-02-28 20:51+0100\n" +"PO-Revision-Date: 2018-03-08 01:21+0000\n" "Last-Translator: Andi Chandler \n" "Language-Team: English (United Kingdom) \n" +"Language: en_GB\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Launchpad-Export-Date: 2017-11-10 15:36+0000\n" -"X-Generator: Launchpad (build 18498)\n" +"X-Launchpad-Export-Date: 2018-03-08 16:40+0000\n" +"X-Generator: Launchpad (build 18566)\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 @@ -76,11 +77,12 @@ msgid "Recent Files" msgstr "Recent Files" -#: ../src/pt-app.c:77 ../src/pt-app.c:134 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Cancel" #: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Open" @@ -144,51 +146,51 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 -#: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "second" msgstr[1] "seconds" -#: ../src/pt-preferences.c:189 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Close" -#: ../src/pt-window.c:274 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Jump back 1 second" msgstr[1] "Jump back %d seconds" -#: ../src/pt-window.c:289 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Jump forward 1 second" msgstr[1] "Jump forward %d seconds" -#: ../src/pt-window.c:306 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Pause" -#: ../src/pt-window.c:309 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pause and rewind 1 second" msgstr[1] "Pause and rewind %d seconds" -#: ../src/pt-window.c:316 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Start playing" -#: ../src/pt-window.c:817 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "View follows cursor" -#: ../src/pt-window.c:819 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Click to follow cursor" @@ -196,7 +198,11 @@ msgid "Go to ..." msgstr "Go to..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_OK" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Go to position:" @@ -225,34 +231,46 @@ msgstr "Waveform" #: ../src/resources/help-overlay.ui.h:7 +msgid "Play/Pause" +msgstr "Play/Pause" + +#: ../src/resources/help-overlay.ui.h:8 +msgid "Jump back" +msgstr "Jump back" + +#: ../src/resources/help-overlay.ui.h:9 +msgid "Jump forward" +msgstr "Jump forward" + +#: ../src/resources/help-overlay.ui.h:10 msgid "Zoom in" msgstr "Zoom in" -#: ../src/resources/help-overlay.ui.h:8 +#: ../src/resources/help-overlay.ui.h:11 msgid "Zoom out" msgstr "Zoom out" -#: ../src/resources/help-overlay.ui.h:9 +#: ../src/resources/help-overlay.ui.h:12 msgid "Open “Go to” dialog" msgstr "Open “Go to” dialogue" -#: ../src/resources/help-overlay.ui.h:10 +#: ../src/resources/help-overlay.ui.h:13 msgid "Copy timestamp to clipboard" msgstr "Copy timestamp to clipboard" -#: ../src/resources/help-overlay.ui.h:11 +#: ../src/resources/help-overlay.ui.h:14 msgid "Go to timestamp in clipboard" msgstr "Go to timestamp in clipboard" -#: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "Help" -#: ../src/resources/help-overlay.ui.h:13 +#: ../src/resources/help-overlay.ui.h:16 msgid "Show help" msgstr "Show help" -#: ../src/resources/help-overlay.ui.h:14 +#: ../src/resources/help-overlay.ui.h:17 msgid "Show keyboard shortcuts" msgstr "Show keyboard shortcuts" @@ -358,6 +376,10 @@ msgid "Speed:" msgstr "Speed:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Open a file" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Play" diff -Nru parlatype-1.5.4/po/es.po parlatype-1.5.6/po/es.po --- parlatype-1.5.4/po/es.po 2017-11-10 15:36:39.000000000 +0000 +++ parlatype-1.5.6/po/es.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,16 +7,17 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-07-26 18:17+0200\n" -"PO-Revision-Date: 2017-11-09 13:00+0000\n" -"Last-Translator: Jorge Toledo \n" +"POT-Creation-Date: 2018-06-04 14:04+0200\n" +"PO-Revision-Date: 2017-12-08 21:04+0000\n" +"Last-Translator: Adolfo Jayme \n" "Language-Team: Spanish \n" +"Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Launchpad-Export-Date: 2017-11-10 15:36+0000\n" -"X-Generator: Launchpad (build 18498)\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 @@ -64,10 +65,9 @@ "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" -"Parlatype necesita GStreamer 1.x para funcionar. Por favor compruebe su " -"instalación de GStreamer i asegúrese que el \"Good plugins\" está " -"instalado.\n" -"Parlatype saldrá ahora, ha recibido el siguiente mensaje: %s" +"Parlatype necesita GStreamer 1.x para funcionar. Revise la instalación de " +"GStreamer y cerciórese de que los complementos «good» estén instalados.\n" +"Parlatype se cerrará ahora. El mensaje de error emitido es: %s" #: ../src/pt-app.c:55 msgid "Show the application's version" @@ -77,11 +77,12 @@ msgid "Recent Files" msgstr "Archivos recientes" -#: ../src/pt-app.c:77 ../src/pt-app.c:134 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Cancelar" #: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Abrir" @@ -101,7 +102,7 @@ #: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" -msgstr "Error abriendo ayuda: %s" +msgstr "Error al abrir la ayuda: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of @@ -129,7 +130,8 @@ "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" -"Aviso: Parlatype carga solamente un fichero a la vez. Los otros se ignoran.\n" +"Atención: Parlatype carga únicamente un archivo a la vez. El resto se " +"ignorará.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to @@ -145,59 +147,63 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 -#: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "segundo" msgstr[1] "segundos" -#: ../src/pt-preferences.c:189 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Cerrar" -#: ../src/pt-window.c:274 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Vuelve 1 segundo atrás" msgstr[1] "Vuelve %d segundos atrás" -#: ../src/pt-window.c:289 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Avanza 1 segundo" msgstr[1] "Avanza %d segundos" -#: ../src/pt-window.c:306 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Pausa" -#: ../src/pt-window.c:309 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pausa y rebobina 1 segundo" msgstr[1] "Pausa y rebobina %d segundos" -#: ../src/pt-window.c:316 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Iniciar la reproducción" -#: ../src/pt-window.c:817 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "La vista sigue al cursor" -#: ../src/pt-window.c:819 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" -msgstr "Click para seguir al cursor" +msgstr "Pulsar para seguir cursor" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." -msgstr "Ir a ..." +msgstr "Ir a…" + +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_Aceptar" -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Ir a la posición:" @@ -226,34 +232,49 @@ msgstr "Forma de onda" #: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Pausa" + +#: ../src/resources/help-overlay.ui.h:8 +#, fuzzy +msgid "Jump back" +msgstr "_Volver atrás:" + +#: ../src/resources/help-overlay.ui.h:9 +#, fuzzy +msgid "Jump forward" +msgstr "Avan_zar:" + +#: ../src/resources/help-overlay.ui.h:10 msgid "Zoom in" msgstr "Ampliar" -#: ../src/resources/help-overlay.ui.h:8 +#: ../src/resources/help-overlay.ui.h:11 msgid "Zoom out" msgstr "Reducir" -#: ../src/resources/help-overlay.ui.h:9 +#: ../src/resources/help-overlay.ui.h:12 msgid "Open “Go to” dialog" msgstr "Abrir el cuadro de diálogo «Ir a»" -#: ../src/resources/help-overlay.ui.h:10 +#: ../src/resources/help-overlay.ui.h:13 msgid "Copy timestamp to clipboard" -msgstr "Copiar marca de tiempo al portapapeles" +msgstr "Copiar la marca cronológica en el portapapeles" -#: ../src/resources/help-overlay.ui.h:11 +#: ../src/resources/help-overlay.ui.h:14 msgid "Go to timestamp in clipboard" -msgstr "Ir a la marca de tiempo copiada en el portapapeles" +msgstr "Ir a la marca cronológica copiada en el portapapeles" -#: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "Ayuda" -#: ../src/resources/help-overlay.ui.h:13 +#: ../src/resources/help-overlay.ui.h:16 msgid "Show help" msgstr "Mostrar la ayuda" -#: ../src/resources/help-overlay.ui.h:14 +#: ../src/resources/help-overlay.ui.h:17 msgid "Show keyboard shortcuts" msgstr "Mostrar atajos de teclado" @@ -271,15 +292,15 @@ #: ../src/resources/menus.ui.h:6 msgid "Info" -msgstr "Info" +msgstr "Información" #: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" -msgstr "Copiar marca de tiempo" +msgstr "Copiar la marca cronológica" #: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" -msgstr "Insertar marca de tiempo" +msgstr "Insertar una marca cronológica" #: ../src/resources/menus.ui.h:11 msgid "_File" @@ -291,7 +312,7 @@ #: ../src/resources/menus.ui.h:13 msgid "_Help" -msgstr "_Ayuda" +msgstr "Ay_uda" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" @@ -325,15 +346,15 @@ #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" -msgstr "Vuelve atrás en la _pausa:" +msgstr "Volver atrás al _pausar:" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" -msgstr "Vuelve atrás (_b):" +msgstr "_Volver atrás:" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" -msgstr "Avanza (_f):" +msgstr "Avan_zar:" #: ../src/resources/preferences.ui.h:14 msgid "Controls" @@ -349,7 +370,7 @@ #: ../src/resources/preferences.ui.h:17 msgid "Start on _top" -msgstr "Iniciar _encima del resto de ventanas" +msgstr "Iniciar _encima de las demás ventanas" #: ../src/resources/preferences.ui.h:18 msgid "Window" @@ -359,6 +380,10 @@ msgid "Speed:" msgstr "Velocidad:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" -msgstr "Abrir archivo" +msgstr "Abrir un archivo" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Reproducir" diff -Nru parlatype-1.5.4/po/fi.po parlatype-1.5.6/po/fi.po --- parlatype-1.5.4/po/fi.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/po/fi.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,381 @@ +# Finnish translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" +"POT-Creation-Date: 2018-06-04 14:31+0200\n" +"PO-Revision-Date: 2018-05-20 08:02+0000\n" +"Last-Translator: Jiri Grönroos \n" +"Language-Team: Finnish \n" +"Language: fi\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=n != 1;\n" +"X-Launchpad-Export-Date: 2018-05-27 20:04+0000\n" +"X-Generator: Launchpad (build 18667)\n" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 +#: ../src/resources/window-headerbar.ui.h:1 +msgid "Parlatype" +msgstr "Parlatype" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 +msgid "Media player for manual speech transcription" +msgstr "Mediasoitin manuaaliseen puheen transkriptioon" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 +msgid "" +"Parlatype is an easy to use media player. Its main purpose is to help you " +"transcribing speech." +msgstr "" +"Parlatype on helppokäyttöinen mediasoitin. Sen päätarkoitus on auttaa puheen " +"transkriptiossa." + +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 +msgid "Transcription utility" +msgstr "Työkalu transkriptioon" + +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +msgid "Transcription;" +msgstr "Transkriptio;" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "LibreOffice-/Parlatype-avustajat" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "Hallitse Parlatypea käyttäen LibreOffice-makroja" + +#: ../src/main.c:36 +msgid "Fatal error" +msgstr "Vakava virhe" + +#: ../src/main.c:40 +#, c-format +msgid "" +"Parlatype needs GStreamer 1.x to run. Please check your installation of " +"GStreamer and make sure you have the \"Good Plugins\" installed.\n" +"Parlatype will quit now, it received this error message: %s" +msgstr "" + +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Näytä sovelluksen versio" + +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 +msgid "Recent Files" +msgstr "Viimeisimmät tiedostot" + +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 +msgid "_Cancel" +msgstr "_Peru" + +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 +msgid "_Open" +msgstr "_Avaa" + +#: ../src/pt-app.c:90 ../src/pt-app.c:146 +msgid "All files" +msgstr "Kaikki tiedostot" + +#: ../src/pt-app.c:131 +msgid "Open Audio File" +msgstr "Avaa äänitiedosto" + +#: ../src/pt-app.c:145 +msgid "Audio files" +msgstr "Äänitiedostot" + +#. Translators: %s is a detailed error message +#: ../src/pt-app.c:202 +#, c-format +msgid "Error opening help: %s" +msgstr "Virhe ohjetta avatessa: %s" + +#. Translators: This is part of the about box, followed by the +#. copyright holders of code from other projects. Instead of +#. "including" it could also say "with" or just "Code from +#. other projects:" +#: ../src/pt-app.c:220 +msgid "Including code from other projects:" +msgstr "Sisältää koodia muista projekteista:" + +#: ../src/pt-app.c:238 +msgid "A basic transcription utility" +msgstr "" + +#: ../src/pt-app.c:242 +msgid "translator-credits" +msgstr "" +"Launchpad Contributions:\n" +" Jiri Grönroos https://launchpad.net/~jiri-gronroos" + +#: ../src/pt-app.c:424 +#, c-format +msgid "" +"Warning: Parlatype handles only one file at a time. The other files are " +"ignored.\n" +msgstr "" +"Varoitus: Parlatype käsittelee vain yhden tiedoston kerrallaan. Muut " +"tiedostot ohitetaan.\n" + +#. Translators: This is a time format, like "2:05:30" for 2 +#. hours, 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-goto-dialog.c:49 +#, c-format +msgctxt "long time format" +msgid "%d:%02d:%02d" +msgstr "" + +#. Translators: This is part of the Preferences dialog +#. or the "Go to ..." dialog. There is a label like +#. "Jump back:", "Jump forward:", "Jump back on pause:" +#. or "Go to position:" before. +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 +msgid "second" +msgid_plural "seconds" +msgstr[0] "sekunti" +msgstr[1] "sekuntia" + +#: ../src/pt-preferences.c:193 +msgid "_Close" +msgstr "_Sulje" + +#: ../src/pt-window.c:296 +#, c-format +msgid "Jump back 1 second" +msgid_plural "Jump back %d seconds" +msgstr[0] "Siirry takaisinpäin 1 sekunti" +msgstr[1] "Siirry takaisinpäin %d sekuntia" + +#: ../src/pt-window.c:311 +#, c-format +msgid "Jump forward 1 second" +msgid_plural "Jump forward %d seconds" +msgstr[0] "Siirry eteenpäin 1 sekunti" +msgstr[1] "Siirry eteenpäin %d sekuntia" + +#: ../src/pt-window.c:328 +msgid "Pause" +msgstr "Keskeytä" + +#: ../src/pt-window.c:331 +#, c-format +msgid "Pause and rewind 1 second" +msgid_plural "Pause and rewind %d seconds" +msgstr[0] "" +msgstr[1] "" + +#: ../src/pt-window.c:338 +msgid "Start playing" +msgstr "Aloita toistaminen" + +#: ../src/pt-window.c:991 +msgid "View follows cursor" +msgstr "Näkymä seuraa kursoria" + +#: ../src/pt-window.c:993 +msgid "Click to follow cursor" +msgstr "" + +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 +msgid "Go to ..." +msgstr "Siirry..." + +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_OK" + +#: ../src/resources/goto-dialog.ui.h:4 +msgid "Go to position:" +msgstr "Siirry sijaintiin:" + +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "Yleiset" + +#: ../src/resources/help-overlay.ui.h:2 +msgid "Open a media file" +msgstr "Avaa mediatiedosto" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "Avaa äskettäin käytettyjä mediatiedostoja" + +#: ../src/resources/help-overlay.ui.h:4 +msgid "Show/hide action menu" +msgstr "Näytä/piilota toimintovalikko" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Lopeta" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "Aaltomuoto" + +#: ../src/resources/help-overlay.ui.h:7 +msgid "Play/Pause" +msgstr "Toista/pidä tauko" + +#: ../src/resources/help-overlay.ui.h:8 +msgid "Jump back" +msgstr "Siirry taaksepäin" + +#: ../src/resources/help-overlay.ui.h:9 +msgid "Jump forward" +msgstr "Siirry eteenpäin" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "Lähennä" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "Loitonna" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "Avaa \"Siirry\"-ikkuna" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "Kopioi aikaleima leikepöydälle" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "Siirry leikepöydällä olevaan aikaleimaan" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Ohje" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "Näytä ohje" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "Näytä pikanäppäimet" + +#: ../src/resources/menus.ui.h:1 +msgid "Open File" +msgstr "Avaa tiedosto" + +#: ../src/resources/menus.ui.h:3 +msgid "Preferences" +msgstr "Asetukset" + +#: ../src/resources/menus.ui.h:4 +msgid "_Keyboard Shortcuts" +msgstr "_Pikanäppäimet" + +#: ../src/resources/menus.ui.h:6 +msgid "Info" +msgstr "Tiedot" + +#: ../src/resources/menus.ui.h:8 +msgid "Copy timestamp" +msgstr "Kopioi aikaleima" + +#: ../src/resources/menus.ui.h:9 +msgid "Insert timestamp" +msgstr "" + +#: ../src/resources/menus.ui.h:11 +msgid "_File" +msgstr "_Tiedosto" + +#: ../src/resources/menus.ui.h:12 +msgid "_Edit" +msgstr "_Muokkaa" + +#: ../src/resources/menus.ui.h:13 +msgid "_Help" +msgstr "_Ohje" + +#: ../src/resources/preferences.ui.h:1 +msgid "Parlatype Preferences" +msgstr "Parlatypen asetukset" + +#: ../src/resources/preferences.ui.h:2 +msgid "_Pixels per second:" +msgstr "_Pikseliä sekunnissa:" + +#: ../src/resources/preferences.ui.h:3 +msgid "Show _time scale" +msgstr "Näytä a_ika-asteikko" + +#. Resolution of the waveform image +#: ../src/resources/preferences.ui.h:5 +msgid "Resolution" +msgstr "Tarkkuus" + +#. A section in preferences, how to display the waveform. +#: ../src/resources/preferences.ui.h:7 +msgid "Display" +msgstr "Esitystapa" + +#: ../src/resources/preferences.ui.h:8 +msgid "_Moving cursor" +msgstr "_Liikkuva kursori" + +#: ../src/resources/preferences.ui.h:9 +msgid "_Fixed cursor" +msgstr "_Kiinteä kursori" + +#: ../src/resources/preferences.ui.h:11 +msgid "Jump back on _pause:" +msgstr "" + +#: ../src/resources/preferences.ui.h:12 +msgid "Jump _back:" +msgstr "Siirry t_aaksepäin:" + +#: ../src/resources/preferences.ui.h:13 +msgid "Jump _forward:" +msgstr "Siirry _eteenpäin:" + +#: ../src/resources/preferences.ui.h:14 +msgid "Controls" +msgstr "Säätimet" + +#: ../src/resources/preferences.ui.h:15 +msgid "Remember _size" +msgstr "Muista _koko" + +#: ../src/resources/preferences.ui.h:16 +msgid "Remember _position" +msgstr "Muista _sijainti" + +#: ../src/resources/preferences.ui.h:17 +msgid "Start on _top" +msgstr "K_äynnistä päällimmäisenä" + +#: ../src/resources/preferences.ui.h:18 +msgid "Window" +msgstr "Ikkuna" + +#: ../src/resources/window.ui.h:2 +msgid "Speed:" +msgstr "Nopeus:" + +#: ../src/resources/window-headerbar.ui.h:3 +msgid "Open a file" +msgstr "Avaa tiedosto" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "T_oista" diff -Nru parlatype-1.5.4/po/fr.po parlatype-1.5.6/po/fr.po --- parlatype-1.5.4/po/fr.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/fr.po 2018-07-06 20:41:48.000000000 +0000 @@ -7,16 +7,17 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-07-26 18:17+0200\n" -"PO-Revision-Date: 2017-07-20 08:43+0000\n" -"Last-Translator: archi02 \n" +"POT-Creation-Date: 2018-02-28 20:51+0100\n" +"PO-Revision-Date: 2018-06-30 17:56-0400\n" +"Last-Translator: Georgelemental \n" "Language-Team: French \n" +"Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Launchpad-Export-Date: 2017-07-30 07:24+0000\n" -"X-Generator: Launchpad (build 18441)\n" +"X-Launchpad-Export-Date: 2018-03-08 16:40+0000\n" +"X-Generator: Poedit 2.0.6\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 @@ -77,11 +78,12 @@ msgid "Recent Files" msgstr "Fichiers récents" -#: ../src/pt-app.c:77 ../src/pt-app.c:134 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Annuler" #: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Ouvrir" @@ -113,13 +115,16 @@ #: ../src/pt-app.c:238 msgid "A basic transcription utility" -msgstr "Un outil de transcription basique" +msgstr "Un outil de transcription de base" #: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" -" archi02 https://launchpad.net/~jo-chibois" +" archi02 https://launchpad.net/~jo-chibois\n" +" yeKcim https://launchpad.net/~yekcim\n" +"Other Contributions:\n" +" Georgelemental https://github.com/georgelemental" #: ../src/pt-app.c:424 #, c-format @@ -144,51 +149,51 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 -#: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "seconde" msgstr[1] "secondes" -#: ../src/pt-preferences.c:189 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Fermer" -#: ../src/pt-window.c:274 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Reculer d'%d seconde" msgstr[1] "Reculer de %d secondes" -#: ../src/pt-window.c:289 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Avancer d'%d seconde" msgstr[1] "Avancer de %d seconde" -#: ../src/pt-window.c:306 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Mettre en pause" -#: ../src/pt-window.c:309 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Mettre en pause et reculer d'%d seconde" msgstr[1] "Mettre en pause et reculer de %d secondes" -#: ../src/pt-window.c:316 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Démarrer la lecture" -#: ../src/pt-window.c:817 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "La vue suit le curseur" -#: ../src/pt-window.c:819 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Cliquer pour suivre le curseur" @@ -196,25 +201,29 @@ msgid "Go to ..." msgstr "Aller à..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_OK" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Aller à la position..." #: ../src/resources/help-overlay.ui.h:1 msgid "General" -msgstr "" +msgstr "Général" #: ../src/resources/help-overlay.ui.h:2 msgid "Open a media file" -msgstr "" +msgstr "Ouvrir un fichier" #: ../src/resources/help-overlay.ui.h:3 msgid "Open recently used media files" -msgstr "" +msgstr "Ouvrir un fichier récent" #: ../src/resources/help-overlay.ui.h:4 msgid "Show/hide action menu" -msgstr "" +msgstr "Afficher/masquer le menu Action" #: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 msgid "Quit" @@ -222,39 +231,51 @@ #: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 msgid "Waveform" -msgstr "Spectre sonore" +msgstr "Forme d'onde" #: ../src/resources/help-overlay.ui.h:7 -msgid "Zoom in" -msgstr "" +msgid "Play/Pause" +msgstr "Lecture/Pause" #: ../src/resources/help-overlay.ui.h:8 -msgid "Zoom out" -msgstr "" +msgid "Jump back" +msgstr "Reculer" #: ../src/resources/help-overlay.ui.h:9 -msgid "Open “Go to” dialog" -msgstr "" +msgid "Jump forward" +msgstr "Avancer" #: ../src/resources/help-overlay.ui.h:10 -msgid "Copy timestamp to clipboard" -msgstr "" +msgid "Zoom in" +msgstr "Zoom avant" #: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "Zoom arrière" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "Ouvrir la fenêtre de dialogue “Aller à”" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "Copier l’horodatage dans le presse-papier" + +#: ../src/resources/help-overlay.ui.h:14 msgid "Go to timestamp in clipboard" -msgstr "" +msgstr "Aller à l’horodatage du presse-papier" -#: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "Aide" -#: ../src/resources/help-overlay.ui.h:13 +#: ../src/resources/help-overlay.ui.h:16 msgid "Show help" -msgstr "" +msgstr "Afficher l’aide" -#: ../src/resources/help-overlay.ui.h:14 +#: ../src/resources/help-overlay.ui.h:17 msgid "Show keyboard shortcuts" -msgstr "" +msgstr "Afficher les raccourcis clavier" #: ../src/resources/menus.ui.h:1 msgid "Open File" @@ -266,7 +287,7 @@ #: ../src/resources/menus.ui.h:4 msgid "_Keyboard Shortcuts" -msgstr "" +msgstr "Raccourcis _clavier" #: ../src/resources/menus.ui.h:6 msgid "Info" @@ -274,7 +295,7 @@ #: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" -msgstr "Copiez l'horodatage" +msgstr "Copier l'horodatage" #: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" @@ -332,7 +353,7 @@ #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" -msgstr "_Avançer" +msgstr "_Avancer" #: ../src/resources/preferences.ui.h:14 msgid "Controls" @@ -340,7 +361,7 @@ #: ../src/resources/preferences.ui.h:15 msgid "Remember _size" -msgstr "" +msgstr "Mémoriser la _taille" #: ../src/resources/preferences.ui.h:16 msgid "Remember _position" @@ -358,6 +379,10 @@ msgid "Speed:" msgstr "Vitesse :" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Ouvrir un fichier" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Lancer" diff -Nru parlatype-1.5.4/po/he.po parlatype-1.5.6/po/he.po --- parlatype-1.5.4/po/he.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/he.po 2018-06-17 20:35:03.000000000 +0000 @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-16 21:45+0100\n" +"POT-Creation-Date: 2018-06-04 14:40+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -18,36 +18,44 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 -#: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "" -#: ../src/main.c:42 -msgid "Show the application's version" +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +msgid "Transcription;" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" msgstr "" -#: ../src/main.c:58 +#: ../src/main.c:36 msgid "Fatal error" msgstr "" -#: ../src/main.c:62 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " @@ -55,44 +63,37 @@ "Parlatype will quit now, it received this error message: %s" msgstr "" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:84 -msgid "[FILE]" -msgstr "" - -#: ../src/main.c:87 -msgid "Minimal audio player for manual speech transcription" +#: ../src/pt-app.c:55 +msgid "Show the application's version" msgstr "" -#: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "" -#: ../src/pt-app.c:60 ../src/pt-app.c:117 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "" -#: ../src/pt-app.c:72 ../src/pt-app.c:128 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "" -#: ../src/pt-app.c:113 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "" -#: ../src/pt-app.c:127 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:176 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "" @@ -101,19 +102,19 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:194 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "" -#: ../src/pt-app.c:212 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "" -#: ../src/pt-app.c:216 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" -#: ../src/pt-app.c:369 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -134,62 +135,134 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-preferences.c:164 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "" -#: ../src/pt-window.c:218 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:232 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:247 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "" -#: ../src/pt-window.c:250 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:256 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "" -#: ../src/pt-window.c:727 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "" -#: ../src/pt-window.c:729 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "" -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +msgid "Open a media file" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +msgid "Show/hide action menu" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:7 +msgid "Play/Pause" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:8 +msgid "Jump back" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:9 +msgid "Jump forward" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "" @@ -199,34 +272,30 @@ msgstr "" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "" - -#: ../src/resources/menus.ui.h:5 -msgid "Info" +msgid "_Keyboard Shortcuts" msgstr "" #: ../src/resources/menus.ui.h:6 -msgid "Quit" +msgid "Info" msgstr "" -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "" @@ -260,10 +329,6 @@ msgid "_Fixed cursor" msgstr "" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" @@ -281,14 +346,18 @@ msgstr "" #: ../src/resources/preferences.ui.h:15 -msgid "Remember _position" +msgid "Remember _size" msgstr "" #: ../src/resources/preferences.ui.h:16 -msgid "Start on _top" +msgid "Remember _position" msgstr "" #: ../src/resources/preferences.ui.h:17 +msgid "Start on _top" +msgstr "" + +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "" @@ -296,6 +365,10 @@ msgid "Speed:" msgstr "" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "" diff -Nru parlatype-1.5.4/po/id.po parlatype-1.5.6/po/id.po --- parlatype-1.5.4/po/id.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/id.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-16 21:45+0100\n" +"POT-Creation-Date: 2018-06-04 14:07+0200\n" "PO-Revision-Date: 2017-01-18 08:43+0000\n" "Last-Translator: Ari Setyo Wibowo \n" "Language-Team: Indonesian \n" +"Language: id\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -18,18 +19,18 @@ "X-Launchpad-Export-Date: 2017-01-20 20:44+0000\n" "X-Generator: Launchpad (build 18302)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 -#: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Pemutar media untuk transkrip pembicaraan manual" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." @@ -37,19 +38,28 @@ "Parlatype adalah pemutar media yang mudah digunakan. Tujuan utamanya adalah " "untuk membantu Anda mentranskrip pembicaraan." -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Peralatan transkripsi" -#: ../src/main.c:42 -msgid "Show the application's version" -msgstr "Tampilkan versi aplikasinya" +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +#, fuzzy +msgid "Transcription;" +msgstr "Peralatan transkripsi" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" -#: ../src/main.c:58 +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "" + +#: ../src/main.c:36 msgid "Fatal error" msgstr "Kesalahan fatal" -#: ../src/main.c:62 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " @@ -60,44 +70,37 @@ "GStreamer Anda dan pastikan \"Good Plugins\" telah terinstall.\n" "Parlatype akan keluar sekarang, menerima pesan kesalahan ini: %s" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:84 -msgid "[FILE]" -msgstr "[FILE]" - -#: ../src/main.c:87 -msgid "Minimal audio player for manual speech transcription" -msgstr "Pemutar audio minimal untuk transkrip pembicaraan manual" +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Tampilkan versi aplikasinya" -#: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Berkas Terakhir" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Batal" -#: ../src/pt-app.c:60 ../src/pt-app.c:117 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "B_uka" -#: ../src/pt-app.c:72 ../src/pt-app.c:128 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Semua berkas" -#: ../src/pt-app.c:113 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Buka Berkas Audio" -#: ../src/pt-app.c:127 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "Berkas audio" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:176 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Kesalahan membuka bantuan: %s" @@ -106,21 +109,21 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:194 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Termasuk kode dari proyek lain:" -#: ../src/pt-app.c:212 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Sebuah peralatan transkrip dasar" -#: ../src/pt-app.c:216 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Ari Setyo Wibowo https://launchpad.net/~ari-el-uno" -#: ../src/pt-app.c:369 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -143,58 +146,136 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "detik" -#: ../src/pt-preferences.c:164 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Tutup" -#: ../src/pt-window.c:218 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Lompat mundur %d detik" -#: ../src/pt-window.c:232 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Lompat maju %d detik" -#: ../src/pt-window.c:247 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Pause" -#: ../src/pt-window.c:250 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pause dan putar ulang %d detik" -#: ../src/pt-window.c:256 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Mulai memutar" -#: ../src/pt-window.c:727 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "Lihat ikuti kursor" -#: ../src/pt-window.c:729 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Klik untuk mengikuti kursor" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Pergi ke ..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_Ok" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Pergi ke posisi:" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +#, fuzzy +msgid "Open a media file" +msgstr "Buka berkas" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +#, fuzzy +msgid "Show/hide action menu" +msgstr "Tampilkan versi aplikasinya" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Keluar" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "Gelombang" + +#: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Pause" + +#: ../src/resources/help-overlay.ui.h:8 +#, fuzzy +msgid "Jump back" +msgstr "Lompat _mundur:" + +#: ../src/resources/help-overlay.ui.h:9 +#, fuzzy +msgid "Jump forward" +msgstr "Jump ma_ju:" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +#, fuzzy +msgid "Copy timestamp to clipboard" +msgstr "Salin informasi waktu" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Bantuan" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Buka Berkas" @@ -204,34 +285,30 @@ msgstr "Preferensi" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "Bantuan" +msgid "_Keyboard Shortcuts" +msgstr "" -#: ../src/resources/menus.ui.h:5 +#: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Info" -#: ../src/resources/menus.ui.h:6 -msgid "Quit" -msgstr "Keluar" - -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Salin informasi waktu" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Masukkan informasi waktu" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "B_erkas" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Sunting" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "Bant_uan" @@ -265,10 +342,6 @@ msgid "_Fixed cursor" msgstr "Kursor _Tetap" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "Gelombang" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Lompat mundur ke _pause:" @@ -286,14 +359,19 @@ msgstr "Kendali" #: ../src/resources/preferences.ui.h:15 -msgid "Remember _position" +#, fuzzy +msgid "Remember _size" msgstr "Ingat _posisi" #: ../src/resources/preferences.ui.h:16 +msgid "Remember _position" +msgstr "Ingat _posisi" + +#: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "Mulai di _atas" -#: ../src/resources/preferences.ui.h:17 +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Jendela" @@ -301,6 +379,16 @@ msgid "Speed:" msgstr "Kecepatan:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Buka berkas" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Putar" + +#~ msgid "[FILE]" +#~ msgstr "[FILE]" + +#~ msgid "Minimal audio player for manual speech transcription" +#~ msgstr "Pemutar audio minimal untuk transkrip pembicaraan manual" diff -Nru parlatype-1.5.4/po/it.po parlatype-1.5.6/po/it.po --- parlatype-1.5.4/po/it.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/it.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-16 21:45+0100\n" +"POT-Creation-Date: 2018-06-04 14:09+0200\n" "PO-Revision-Date: 2017-01-17 17:30+0000\n" "Last-Translator: Luca Ciavatta \n" "Language-Team: Italian \n" +"Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -18,18 +19,18 @@ "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 -#: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Lettore multimediale per la trascrizione vocale manuale" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." @@ -37,19 +38,28 @@ "Parlatype è un lettore multimediale facile da usare. Il suo scopo principale " "è quello di aiutare a trascrivere il parlato." -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Utilità di trascrizione" -#: ../src/main.c:42 -msgid "Show the application's version" -msgstr "Mostra la versione dell'applicazione" +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +#, fuzzy +msgid "Transcription;" +msgstr "Utilità di trascrizione" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" -#: ../src/main.c:58 +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "" + +#: ../src/main.c:36 msgid "Fatal error" msgstr "Errore critico" -#: ../src/main.c:62 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " @@ -61,44 +71,37 @@ "\"Good Plugins\" installati.\n" "Parlatype terminerà l'esecuzione ora. Messaggio di errore: % s" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:84 -msgid "[FILE]" -msgstr "[FILE]" - -#: ../src/main.c:87 -msgid "Minimal audio player for manual speech transcription" -msgstr "Lettore audio minimale per la trascrizione vocale manuale" +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Mostra la versione dell'applicazione" -#: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "File recenti" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Annulla" -#: ../src/pt-app.c:60 ../src/pt-app.c:117 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Apri" -#: ../src/pt-app.c:72 ../src/pt-app.c:128 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Tutti i file" -#: ../src/pt-app.c:113 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Aprire File Audio" -#: ../src/pt-app.c:127 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "File audio" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:176 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Errore apertura aiuto: %s" @@ -107,21 +110,21 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:194 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Incluso il codice da altri progetti:" -#: ../src/pt-app.c:212 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Un programma di trascrizione" -#: ../src/pt-app.c:216 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Luca Ciavatta https://launchpad.net/~cialu" -#: ../src/pt-app.c:369 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -144,62 +147,140 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "secondo" msgstr[1] "secondi" -#: ../src/pt-preferences.c:164 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Chiudi" -#: ../src/pt-window.c:218 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Indietro di 1 secondo" msgstr[1] "Indietro di %d secondi" -#: ../src/pt-window.c:232 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Avanti di 1 secondo" msgstr[1] "Avanti di %d secondi" -#: ../src/pt-window.c:247 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Pausa" -#: ../src/pt-window.c:250 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pausa e indietro di 1 secondo" msgstr[1] "Pausa e indietro di %d secondi" -#: ../src/pt-window.c:256 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Avvia la riproduzione" -#: ../src/pt-window.c:727 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "Vista segue il cursore" -#: ../src/pt-window.c:729 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Clicca per seguire il cursore" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Vai a ..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_OK" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Vai alla posizione:" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +#, fuzzy +msgid "Open a media file" +msgstr "Aprire un file" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +#, fuzzy +msgid "Show/hide action menu" +msgstr "Mostra la versione dell'applicazione" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Esci" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "Forma d’onda" + +#: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Pausa" + +#: ../src/resources/help-overlay.ui.h:8 +#, fuzzy +msgid "Jump back" +msgstr "_Indietro:" + +#: ../src/resources/help-overlay.ui.h:9 +#, fuzzy +msgid "Jump forward" +msgstr "_Avanti:" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +#, fuzzy +msgid "Copy timestamp to clipboard" +msgstr "Copia marca temporale" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Aiuto" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Apri file" @@ -209,34 +290,30 @@ msgstr "Preferenze" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "Aiuto" +msgid "_Keyboard Shortcuts" +msgstr "" -#: ../src/resources/menus.ui.h:5 +#: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Informazioni" -#: ../src/resources/menus.ui.h:6 -msgid "Quit" -msgstr "Esci" - -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Copia marca temporale" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Inserisci marca temporale" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_File" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Modifica" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Aiuto" @@ -270,10 +347,6 @@ msgid "_Fixed cursor" msgstr "Cursore _fisso" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "Forma d’onda" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Indietro in _pausa:" @@ -291,14 +364,19 @@ msgstr "Controlli" #: ../src/resources/preferences.ui.h:15 -msgid "Remember _position" +#, fuzzy +msgid "Remember _size" msgstr "Ricorda la _posizione" #: ../src/resources/preferences.ui.h:16 +msgid "Remember _position" +msgstr "Ricorda la _posizione" + +#: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "" -#: ../src/resources/preferences.ui.h:17 +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Finestra" @@ -306,6 +384,16 @@ msgid "Speed:" msgstr "Velocità:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Aprire un file" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Riproduci" + +#~ msgid "[FILE]" +#~ msgstr "[FILE]" + +#~ msgid "Minimal audio player for manual speech transcription" +#~ msgstr "Lettore audio minimale per la trascrizione vocale manuale" diff -Nru parlatype-1.5.4/po/ja.po parlatype-1.5.6/po/ja.po --- parlatype-1.5.4/po/ja.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/ja.po 2018-06-17 20:35:03.000000000 +0000 @@ -1,23 +1,24 @@ # Japanese translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. -# Shinichirou Yamada , 2017. +# FIRST AUTHOR , 2017. # msgid "" msgstr "" -"Project-Id-Version: parlatype 1.5\n" +"Project-Id-Version: parlatype\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-07-26 18:17+0200\n" -"PO-Revision-Date: 2017-07-26 10:12+0000\n" -"Last-Translator: Shinichirou Yamada " -"\n" +"POT-Creation-Date: 2018-06-04 14:32+0200\n" +"PO-Revision-Date: 2018-03-13 03:26+0000\n" +"Last-Translator: Shinichirou Yamada \n" "Language-Team: Japanese \n" +"Language: ja\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Launchpad-Export-Date: 2017-07-30 07:24+0000\n" -"X-Generator: Launchpad (build 18441)\n" +"X-Launchpad-Export-Date: 2018-04-05 18:16+0000\n" +"X-Generator: Launchpad (build 18599)\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 @@ -34,7 +35,9 @@ msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." -msgstr "Parlatype は使いやすいメディアプレイヤーです。その主目的はあなたがスピーチを転写するのを助けることにあります。" +msgstr "" +"Parlatype は使いやすいメディアプレイヤーです。その主目的はあなたがスピーチを" +"転写するのを助けることにあります。" #: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" @@ -42,15 +45,15 @@ #: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 msgid "Transcription;" -msgstr "" +msgstr "Transcription;トランスクリプション;書き起こし;転写;" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 msgid "LibreOffice/Parlatype Helpers" -msgstr "" +msgstr "LibreOffice/Parlatype ヘルパー" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 msgid "Control Parlatype using LibreOffice macros" -msgstr "" +msgstr "LibreOffice のマクロで Parlatype をコントロールする" #: ../src/main.c:36 msgid "Fatal error" @@ -63,8 +66,9 @@ "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" -"Parlatype は GStreamer 1.x の実行を必要とします。GStreamer のインストールをチェックして、\"Good " -"Plugins\" がインストール済みかどうかを確認してください。\n" +"Parlatype は GStreamer 1.x の実行を必要とします。GStreamer のインストールを" +"チェックして、\"Good Plugins\" がインストール済みかどうかを確認してくださ" +"い。\n" "Parlatype はこのエラーメッセージを返した後、終了します: %s" #: ../src/pt-app.c:55 @@ -75,11 +79,12 @@ msgid "Recent Files" msgstr "最近使用したファイル" -#: ../src/pt-app.c:77 ../src/pt-app.c:134 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "キャンセル(_C)" #: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "開く(_O)" @@ -99,7 +104,7 @@ #: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" -msgstr "" +msgstr "ヘルプを開く際にエラー: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of @@ -124,7 +129,9 @@ msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" -msgstr "警告: Parlatype は一度にファイルを一つだけ処理します。他のファイルは無視されます。\n" +msgstr "" +"警告: Parlatype は一度にファイルを一つだけ処理します。他のファイルは無視され" +"ます。\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to @@ -140,47 +147,47 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 -#: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "秒" -#: ../src/pt-preferences.c:189 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "閉じる(_C)" -#: ../src/pt-window.c:274 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "%d 秒前に戻る" -#: ../src/pt-window.c:289 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "%d 秒先に進む" -#: ../src/pt-window.c:306 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "一時停止" -#: ../src/pt-window.c:309 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "一時停止して %d 秒前に戻る" -#: ../src/pt-window.c:316 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "再生を開始する" -#: ../src/pt-window.c:817 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "カーソルに追従して表示します" -#: ../src/pt-window.c:819 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "クリックするとカーソルの位置を先頭に表示します" @@ -188,65 +195,81 @@ msgid "Go to ..." msgstr "移動..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "OK(_O)" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "次の位置まで移動:" #: ../src/resources/help-overlay.ui.h:1 msgid "General" -msgstr "" +msgstr "全般" #: ../src/resources/help-overlay.ui.h:2 msgid "Open a media file" -msgstr "" +msgstr "メディアファイルを開く" #: ../src/resources/help-overlay.ui.h:3 msgid "Open recently used media files" -msgstr "" +msgstr "最近使用したメディアファイルを開く" #: ../src/resources/help-overlay.ui.h:4 msgid "Show/hide action menu" -msgstr "" +msgstr "アクションメニューの表示/非表示を切り替える" #: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 msgid "Quit" -msgstr "終了" +msgstr "終了する" #: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "波形" #: ../src/resources/help-overlay.ui.h:7 -msgid "Zoom in" -msgstr "" +msgid "Play/Pause" +msgstr "再生/一時停止する" #: ../src/resources/help-overlay.ui.h:8 -msgid "Zoom out" -msgstr "" +msgid "Jump back" +msgstr "前に戻る" #: ../src/resources/help-overlay.ui.h:9 -msgid "Open “Go to” dialog" -msgstr "" +msgid "Jump forward" +msgstr "先に進む" #: ../src/resources/help-overlay.ui.h:10 -msgid "Copy timestamp to clipboard" -msgstr "" +msgid "Zoom in" +msgstr "拡大する" #: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "縮小する" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "“移動”ダイアログを開く" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "クリップボードにタイムスタンプをコピーする" + +#: ../src/resources/help-overlay.ui.h:14 msgid "Go to timestamp in clipboard" -msgstr "" +msgstr "クリップボードのタイムスタンプに移動する" -#: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "ヘルプ" -#: ../src/resources/help-overlay.ui.h:13 +#: ../src/resources/help-overlay.ui.h:16 msgid "Show help" -msgstr "" +msgstr "ヘルプを表示する" -#: ../src/resources/help-overlay.ui.h:14 +#: ../src/resources/help-overlay.ui.h:17 msgid "Show keyboard shortcuts" -msgstr "" +msgstr "キーボードショートカットを表示する" #: ../src/resources/menus.ui.h:1 msgid "Open File" @@ -258,7 +281,7 @@ #: ../src/resources/menus.ui.h:4 msgid "_Keyboard Shortcuts" -msgstr "" +msgstr "キーボードショートカット(_K)" #: ../src/resources/menus.ui.h:6 msgid "Info" @@ -350,6 +373,10 @@ msgid "Speed:" msgstr "速度:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" -msgstr "ファイルを開きます" +msgstr "ファイルを開く" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "再生(_P)" diff -Nru parlatype-1.5.4/po/kab.po parlatype-1.5.6/po/kab.po --- parlatype-1.5.4/po/kab.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/kab.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-16 21:45+0100\n" +"POT-Creation-Date: 2018-06-04 14:11+0200\n" "PO-Revision-Date: 2017-01-17 13:43+0000\n" "Last-Translator: Belkacem Mohammed \n" "Language-Team: Kabyle \n" +"Language: kab\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -18,36 +19,44 @@ "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 -#: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "" -#: ../src/main.c:42 -msgid "Show the application's version" +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +msgid "Transcription;" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" msgstr "" -#: ../src/main.c:58 +#: ../src/main.c:36 msgid "Fatal error" msgstr "" -#: ../src/main.c:62 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " @@ -55,44 +64,37 @@ "Parlatype will quit now, it received this error message: %s" msgstr "" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:84 -msgid "[FILE]" -msgstr "[FILE]" - -#: ../src/main.c:87 -msgid "Minimal audio player for manual speech transcription" +#: ../src/pt-app.c:55 +msgid "Show the application's version" msgstr "" -#: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Ifayluyen ineggura" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Sefsex" -#: ../src/pt-app.c:60 ../src/pt-app.c:117 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Ldi" -#: ../src/pt-app.c:72 ../src/pt-app.c:128 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Akk ifuyla" -#: ../src/pt-app.c:113 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Ldi afaylu ameslaw" -#: ../src/pt-app.c:127 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "Ifuyla imeslawen" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:176 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Tuccḍa di tulya n tallalt: %s" @@ -101,21 +103,21 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:194 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "" -#: ../src/pt-app.c:212 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "" -#: ../src/pt-app.c:216 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Belkacem Mohammed https://launchpad.net/~belkacem77" -#: ../src/pt-app.c:369 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -136,62 +138,135 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "tasint" msgstr[1] "tasinin" -#: ../src/pt-preferences.c:164 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Mdel" -#: ../src/pt-window.c:218 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:232 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:247 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "" -#: ../src/pt-window.c:250 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:256 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "" -#: ../src/pt-window.c:727 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "" -#: ../src/pt-window.c:729 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "" -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +#, fuzzy +msgid "Open a media file" +msgstr "Ldi afaylu ameslaw" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +msgid "Show/hide action menu" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:7 +msgid "Play/Pause" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:8 +msgid "Jump back" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:9 +msgid "Jump forward" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "" @@ -201,34 +276,30 @@ msgstr "" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "" - -#: ../src/resources/menus.ui.h:5 -msgid "Info" +msgid "_Keyboard Shortcuts" msgstr "" #: ../src/resources/menus.ui.h:6 -msgid "Quit" +msgid "Info" msgstr "" -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "" @@ -262,10 +333,6 @@ msgid "_Fixed cursor" msgstr "" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" @@ -283,14 +350,18 @@ msgstr "" #: ../src/resources/preferences.ui.h:15 -msgid "Remember _position" +msgid "Remember _size" msgstr "" #: ../src/resources/preferences.ui.h:16 -msgid "Start on _top" +msgid "Remember _position" msgstr "" #: ../src/resources/preferences.ui.h:17 +msgid "Start on _top" +msgstr "" + +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "" @@ -298,6 +369,13 @@ msgid "Speed:" msgstr "" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "" + +#~ msgid "[FILE]" +#~ msgstr "[FILE]" diff -Nru parlatype-1.5.4/po/ku.po parlatype-1.5.6/po/ku.po --- parlatype-1.5.4/po/ku.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/ku.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-16 21:45+0100\n" +"POT-Creation-Date: 2018-06-04 14:13+0200\n" "PO-Revision-Date: 2017-02-15 09:08+0000\n" "Last-Translator: Rokar ✌ \n" "Language-Team: Kurdish \n" +"Language: ku\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -18,36 +19,44 @@ "X-Launchpad-Export-Date: 2017-03-13 15:08+0000\n" "X-Generator: Launchpad (build 18331)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 -#: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "" -#: ../src/main.c:42 -msgid "Show the application's version" +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +msgid "Transcription;" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" msgstr "" -#: ../src/main.c:58 +#: ../src/main.c:36 msgid "Fatal error" msgstr "" -#: ../src/main.c:62 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " @@ -55,44 +64,37 @@ "Parlatype will quit now, it received this error message: %s" msgstr "" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:84 -msgid "[FILE]" -msgstr "[PEL]" - -#: ../src/main.c:87 -msgid "Minimal audio player for manual speech transcription" +#: ../src/pt-app.c:55 +msgid "Show the application's version" msgstr "" -#: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Pelên borî" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Betal" -#: ../src/pt-app.c:60 ../src/pt-app.c:117 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Veke" -#: ../src/pt-app.c:72 ../src/pt-app.c:128 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Hemû pelan" -#: ../src/pt-app.c:113 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "" -#: ../src/pt-app.c:127 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "Pelên Dengê" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:176 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "" @@ -101,21 +103,21 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:194 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "" -#: ../src/pt-app.c:212 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "" -#: ../src/pt-app.c:216 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Rokar ✌ https://launchpad.net/~rokarali" -#: ../src/pt-app.c:369 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -136,62 +138,136 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "çirke" msgstr[1] "çirke" -#: ../src/pt-preferences.c:164 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Bigire" -#: ../src/pt-window.c:218 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:232 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:247 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Raweste" -#: ../src/pt-window.c:250 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:256 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "" -#: ../src/pt-window.c:727 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "" -#: ../src/pt-window.c:729 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "" -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_Temam" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +#, fuzzy +msgid "Open a media file" +msgstr "Dosiyekê veke" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +msgid "Show/hide action menu" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Derkeve" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Raweste" + +#: ../src/resources/help-overlay.ui.h:8 +msgid "Jump back" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:9 +msgid "Jump forward" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Alîkarî" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Pelê Veke" @@ -201,34 +277,30 @@ msgstr "Vebijêrk" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "Alîkarî" +msgid "_Keyboard Shortcuts" +msgstr "" -#: ../src/resources/menus.ui.h:5 +#: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Agahî" -#: ../src/resources/menus.ui.h:6 -msgid "Quit" -msgstr "Derkeve" - -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Pel" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Biguherîne" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Alîkarî" @@ -262,10 +334,6 @@ msgid "_Fixed cursor" msgstr "" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" @@ -283,14 +351,18 @@ msgstr "Kontrolkirin" #: ../src/resources/preferences.ui.h:15 -msgid "Remember _position" +msgid "Remember _size" msgstr "" #: ../src/resources/preferences.ui.h:16 -msgid "Start on _top" +msgid "Remember _position" msgstr "" #: ../src/resources/preferences.ui.h:17 +msgid "Start on _top" +msgstr "" + +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Pencere" @@ -298,6 +370,13 @@ msgid "Speed:" msgstr "Lez:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Dosiyekê veke" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Lêdan" + +#~ msgid "[FILE]" +#~ msgstr "[PEL]" diff -Nru parlatype-1.5.4/po/LINGUAS parlatype-1.5.6/po/LINGUAS --- parlatype-1.5.4/po/LINGUAS 2017-11-10 16:13:31.000000000 +0000 +++ parlatype-1.5.6/po/LINGUAS 2018-06-17 20:35:03.000000000 +0000 @@ -2,10 +2,12 @@ # Note: he is empty right now, it's here to test right to left layout. # Please keep this list sorted alphabetically. # +ar ca de en_GB es +fi fr he id @@ -16,6 +18,9 @@ lt ms nl +pl pt pt_BR +sk sr +sv diff -Nru parlatype-1.5.4/po/lt.po parlatype-1.5.6/po/lt.po --- parlatype-1.5.4/po/lt.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/lt.po 2018-06-17 20:35:03.000000000 +0000 @@ -1,23 +1,24 @@ # Lithuanian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. -# Moo , 2017. +# FIRST AUTHOR , 2017. # msgid "" msgstr "" -"Project-Id-Version: parlatype 1.5\n" +"Project-Id-Version: parlatype\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-07-26 18:17+0200\n" -"PO-Revision-Date: 2017-07-27 21:55+0000\n" +"POT-Creation-Date: 2018-06-04 14:33+0200\n" +"PO-Revision-Date: 2018-03-03 10:21+0000\n" "Last-Translator: Moo \n" "Language-Team: Lithuanian \n" +"Language: lt\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " -"(n%100<10 || n%100>=20) ? 1 : 2;\n" -"X-Launchpad-Export-Date: 2017-07-30 07:24+0000\n" -"X-Generator: Launchpad (build 18441)\n" +"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n" +"%100<10 || n%100>=20) ? 1 : 2;\n" +"X-Launchpad-Export-Date: 2018-03-08 16:44+0000\n" +"X-Generator: Launchpad (build 18566)\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 @@ -66,8 +67,8 @@ "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype savo darbui reikalauja GStreamer 1.x. Prašome patikrinti savo " -"GStreamer įdiegimą ir įsitikinti, kad esate įdiegę \"geruosius įskiepius\" " -"(angl. Good Plugins).\n" +"GStreamer įdiegimą ir įsitikinti, kad esate įdiegę \"geruosius įskiepius" +"\" (angl. Good Plugins).\n" "Dabar Parlatype užbaigs darbą, programa gavo šią klaidą: %s" #: ../src/pt-app.c:55 @@ -78,11 +79,12 @@ msgid "Recent Files" msgstr "Paskiausiai naudoti failai" -#: ../src/pt-app.c:77 ../src/pt-app.c:134 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Atsisakyti" #: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Atverti" @@ -145,19 +147,19 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 -#: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "sekundę" msgstr[1] "sekundes" msgstr[2] "sekundžių" -#: ../src/pt-preferences.c:189 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Užverti" -#: ../src/pt-window.c:274 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" @@ -165,7 +167,7 @@ msgstr[1] "Peršokti %d sekundes atgal" msgstr[2] "Peršokti %d sekundžių atgal" -#: ../src/pt-window.c:289 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" @@ -173,11 +175,11 @@ msgstr[1] "Peršokti %d sekundes pirmyn" msgstr[2] "Peršokti %d sekundžių pirmyn" -#: ../src/pt-window.c:306 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Pristabdyti" -#: ../src/pt-window.c:309 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" @@ -185,15 +187,15 @@ msgstr[1] "Pristabdyti ir atsukti %d sekundes atgal" msgstr[2] "Pristabdyti ir atsukti %d sekundžių atgal" -#: ../src/pt-window.c:316 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Pradėti groti" -#: ../src/pt-window.c:817 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "Rodinys seka paskui žymeklį" -#: ../src/pt-window.c:819 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Spustelėkite, norėdami sekti paskui žymeklį" @@ -201,7 +203,11 @@ msgid "Go to ..." msgstr "Eiti ..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_Gerai" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Pereiti į:" @@ -230,34 +236,46 @@ msgstr "Bangos forma" #: ../src/resources/help-overlay.ui.h:7 +msgid "Play/Pause" +msgstr "Groti/Pristabdyti" + +#: ../src/resources/help-overlay.ui.h:8 +msgid "Jump back" +msgstr "Peršokti atgal" + +#: ../src/resources/help-overlay.ui.h:9 +msgid "Jump forward" +msgstr "Peršokti pirmyn" + +#: ../src/resources/help-overlay.ui.h:10 msgid "Zoom in" msgstr "Didinti" -#: ../src/resources/help-overlay.ui.h:8 +#: ../src/resources/help-overlay.ui.h:11 msgid "Zoom out" msgstr "Mažinti" -#: ../src/resources/help-overlay.ui.h:9 +#: ../src/resources/help-overlay.ui.h:12 msgid "Open “Go to” dialog" msgstr "Atverti \"Eiti\" dialogą" -#: ../src/resources/help-overlay.ui.h:10 +#: ../src/resources/help-overlay.ui.h:13 msgid "Copy timestamp to clipboard" msgstr "Kopijuoti laiko žymą į iškarpinę" -#: ../src/resources/help-overlay.ui.h:11 +#: ../src/resources/help-overlay.ui.h:14 msgid "Go to timestamp in clipboard" msgstr "Eiti į iškarpinėje esančią laiko žymą" -#: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "Žinynas" -#: ../src/resources/help-overlay.ui.h:13 +#: ../src/resources/help-overlay.ui.h:16 msgid "Show help" msgstr "Rodyti žinyną" -#: ../src/resources/help-overlay.ui.h:14 +#: ../src/resources/help-overlay.ui.h:17 msgid "Show keyboard shortcuts" msgstr "Rodyti klaviatūros trumpinius" @@ -363,6 +381,10 @@ msgid "Speed:" msgstr "Greitis:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Atverti failą" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Groti" diff -Nru parlatype-1.5.4/po/Makefile.in.in parlatype-1.5.6/po/Makefile.in.in --- parlatype-1.5.4/po/Makefile.in.in 2017-10-12 10:55:18.000000000 +0000 +++ parlatype-1.5.6/po/Makefile.in.in 2018-04-09 18:21:48.000000000 +0000 @@ -33,8 +33,7 @@ datadir = @datadir@ datarootdir = @datarootdir@ libdir = @libdir@ -DATADIRNAME = @DATADIRNAME@ -itlocaledir = $(prefix)/$(DATADIRNAME)/locale +localedir = @localedir@ subdir = po install_sh = @install_sh@ # Automake >= 1.8 provides @mkdir_p@. @@ -80,7 +79,7 @@ .po.pox: $(MAKE) $(GETTEXT_PACKAGE).pot - $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox + $(MSGMERGE) $* $(GETTEXT_PACKAGE).pot -o $*.pox .po.mo: $(INTLTOOL_V_MSGFMT)$(MSGFMT) -o $@ $< @@ -108,7 +107,7 @@ install-data-yes: all linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ - dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ + dir=$(DESTDIR)$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $$dir; \ if test -r $$lang.gmo; then \ $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ @@ -142,8 +141,8 @@ uninstall: linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ + rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ + rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ done check: all $(GETTEXT_PACKAGE).pot diff -Nru parlatype-1.5.4/po/ms.po parlatype-1.5.6/po/ms.po --- parlatype-1.5.4/po/ms.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/ms.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-03-26 14:25+0200\n" +"POT-Creation-Date: 2018-06-04 14:14+0200\n" "PO-Revision-Date: 2017-04-08 13:48+0000\n" "Last-Translator: Gabor Karsay \n" "Language-Team: Malay \n" +"Language: ms\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -18,36 +19,45 @@ "X-Launchpad-Export-Date: 2017-04-08 13:52+0000\n" "X-Generator: Launchpad (build 18343)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:65 -#: ../src/pt-app.c:216 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Pemain media untuk transripsi pertuturan manual" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Utiliti transkripsi" -#: ../src/main.c:43 -msgid "Show the application's version" -msgstr "Tunjuk versi aplikasi" +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +#, fuzzy +msgid "Transcription;" +msgstr "Utiliti transkripsi" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" -#: ../src/main.c:59 +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "" + +#: ../src/main.c:36 msgid "Fatal error" msgstr "Ralat mati" -#: ../src/main.c:63 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " @@ -55,44 +65,37 @@ "Parlatype will quit now, it received this error message: %s" msgstr "" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:87 -msgid "[FILE]" -msgstr "[FAIL]" - -#: ../src/main.c:90 -msgid "Minimal audio player for manual speech transcription" -msgstr "" +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Tunjuk versi aplikasi" -#: ../src/pt-app.c:56 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Fail Baru-baru Ini" -#: ../src/pt-app.c:58 ../src/pt-app.c:115 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Batal" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "B_uka" -#: ../src/pt-app.c:71 ../src/pt-app.c:127 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Semua fail" -#: ../src/pt-app.c:112 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Buka Fail Audio" -#: ../src/pt-app.c:126 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "Fail audio" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:183 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Ralat membuka bantuan: %s" @@ -101,22 +104,22 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:201 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Kod yang disertakan dari projek lain:" -#: ../src/pt-app.c:219 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Utiliti transkripsi asas" -#: ../src/pt-app.c:223 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Gabor Karsay https://launchpad.net/~gabor-karsay\n" " abuyop https://launchpad.net/~abuyop" -#: ../src/pt-app.c:376 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -137,62 +140,140 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "saat" msgstr[1] "saat" -#: ../src/pt-preferences.c:169 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "T_utup" -#: ../src/pt-window.c:231 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Lompat balik 1 saat" msgstr[1] "Lompat balik %d saat" -#: ../src/pt-window.c:246 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Lompat maju 1 saat" msgstr[1] "Lompat maju %d saat" -#: ../src/pt-window.c:263 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Jeda" -#: ../src/pt-window.c:266 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:273 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Mulakan main" -#: ../src/pt-window.c:750 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "Paparan ikuti kursor" -#: ../src/pt-window.c:752 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Klik untuk ikuti kursor" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Pergi ke ..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_OK" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Pergi ke kedudukan:" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +#, fuzzy +msgid "Open a media file" +msgstr "Buka satu fail" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +#, fuzzy +msgid "Show/hide action menu" +msgstr "Tunjuk versi aplikasi" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Keluar" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "Bentuk Gelombang" + +#: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Jeda" + +#: ../src/resources/help-overlay.ui.h:8 +#, fuzzy +msgid "Jump back" +msgstr "Lompat balik 1 saat" + +#: ../src/resources/help-overlay.ui.h:9 +#, fuzzy +msgid "Jump forward" +msgstr "Lompat maju 1 saat" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +#, fuzzy +msgid "Copy timestamp to clipboard" +msgstr "Salin setem masa" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Bantuan" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Buka Fail" @@ -202,34 +283,30 @@ msgstr "Keutamaan" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "Bantuan" +msgid "_Keyboard Shortcuts" +msgstr "" -#: ../src/resources/menus.ui.h:5 +#: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Maklumat" -#: ../src/resources/menus.ui.h:6 -msgid "Quit" -msgstr "Keluar" - -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Salin setem masa" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Sisip setem masa" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Fail" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Sunting" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Bantuan" @@ -263,10 +340,6 @@ msgid "_Fixed cursor" msgstr "Kursor _tetap" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "Bentuk Gelombang" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" @@ -284,14 +357,19 @@ msgstr "Kawalan" #: ../src/resources/preferences.ui.h:15 -msgid "Remember _position" +#, fuzzy +msgid "Remember _size" msgstr "Ingat _kedudukan" #: ../src/resources/preferences.ui.h:16 +msgid "Remember _position" +msgstr "Ingat _kedudukan" + +#: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "Mula di _atas" -#: ../src/resources/preferences.ui.h:17 +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Tetingkap" @@ -299,6 +377,13 @@ msgid "Speed:" msgstr "Kelajuan:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Buka satu fail" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Tukarnama" + +#~ msgid "[FILE]" +#~ msgstr "[FAIL]" diff -Nru parlatype-1.5.4/po/nl.po parlatype-1.5.6/po/nl.po --- parlatype-1.5.4/po/nl.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/nl.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-04-18 20:55+0200\n" +"POT-Creation-Date: 2018-06-04 14:15+0200\n" "PO-Revision-Date: 2017-06-26 09:33+0000\n" "Last-Translator: Heimen Stoffels \n" "Language-Team: Dutch \n" +"Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -18,18 +19,18 @@ "X-Launchpad-Export-Date: 2017-06-29 09:44+0000\n" "X-Generator: Launchpad (build 18418)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:65 -#: ../src/pt-app.c:216 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Mediaspeler voor handmatige spraaktranscriptie" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." @@ -37,19 +38,28 @@ "Parlatype is een eenvoudig te gebruiken mediaspeler. Het hoofddoel is om te " "helpen bij het transcriberen van spraak." -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Transcriptiehulpmiddel" -#: ../src/main.c:43 -msgid "Show the application's version" -msgstr "Applicatieversie weergeven" +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +#, fuzzy +msgid "Transcription;" +msgstr "Transcriptiehulpmiddel" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" -#: ../src/main.c:59 +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "" + +#: ../src/main.c:36 msgid "Fatal error" msgstr "Fatale fout" -#: ../src/main.c:63 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " @@ -60,44 +70,37 @@ "installatie en zorg ervoor dat u de \"Good Plugins\" heeft geïnstalleerd. " "Parlatype wordt nu afgesloten met deze foutmelding: %s" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:87 -msgid "[FILE]" -msgstr "[BESTAND]" - -#: ../src/main.c:90 -msgid "Minimal audio player for manual speech transcription" -msgstr "Minimale audiospeler voor handmatige spraaktranscriptie" +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Applicatieversie weergeven" -#: ../src/pt-app.c:56 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Recente bestanden" -#: ../src/pt-app.c:58 ../src/pt-app.c:115 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Annuleren" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Openen" -#: ../src/pt-app.c:71 ../src/pt-app.c:127 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Alle bestanden" -#: ../src/pt-app.c:112 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Audiobestand openen" -#: ../src/pt-app.c:126 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "Audiobestanden" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:183 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Fout bij openen van hulp: %s" @@ -106,21 +109,21 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:201 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Inclusief code van andere projecten:" -#: ../src/pt-app.c:219 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Een basis-transcriptiehulpmiddel" -#: ../src/pt-app.c:223 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Heimen Stoffels https://launchpad.net/~vistaus" -#: ../src/pt-app.c:394 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -143,62 +146,140 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "seconde" msgstr[1] "seconden" -#: ../src/pt-preferences.c:169 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Sluiten" -#: ../src/pt-window.c:273 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "1 seconde terugspoelen" msgstr[1] "%d seconden terugspoelen" -#: ../src/pt-window.c:288 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "1 seconde vooruitspoelen" msgstr[1] "$d seconden vooruitspoelen" -#: ../src/pt-window.c:305 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Pauzeren" -#: ../src/pt-window.c:308 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pauzeren en 1 seconde terugspoelen" msgstr[1] "Pauzeren en %d seconden terugspoelen" -#: ../src/pt-window.c:315 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Afspelen starten" -#: ../src/pt-window.c:804 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "Weergave volgt cursor" -#: ../src/pt-window.c:806 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Klik om cursor te volgen" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Ga naar ..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_Ok" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Ga naar positie:" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +#, fuzzy +msgid "Open a media file" +msgstr "Een bestand openen" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +#, fuzzy +msgid "Show/hide action menu" +msgstr "Applicatieversie weergeven" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Afsluiten" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "Golfvorm" + +#: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Pauzeren" + +#: ../src/resources/help-overlay.ui.h:8 +#, fuzzy +msgid "Jump back" +msgstr "_Terugspoelen" + +#: ../src/resources/help-overlay.ui.h:9 +#, fuzzy +msgid "Jump forward" +msgstr "_Vooruitspoelen:" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +#, fuzzy +msgid "Copy timestamp to clipboard" +msgstr "Tijdstempel kopiëren" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Hulp" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Bestand openen" @@ -208,34 +289,30 @@ msgstr "Voorkeuren" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "Hulp" +msgid "_Keyboard Shortcuts" +msgstr "" -#: ../src/resources/menus.ui.h:5 +#: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Informatie" -#: ../src/resources/menus.ui.h:6 -msgid "Quit" -msgstr "Afsluiten" - -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Tijdstempel kopiëren" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Tijdstempel invoegen" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Bestand" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Bewerken" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Hulp" @@ -269,10 +346,6 @@ msgid "_Fixed cursor" msgstr "_Vastgezette cursor" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "Golfvorm" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Terugspoelen bij _pauzeren:" @@ -290,14 +363,19 @@ msgstr "Bediening" #: ../src/resources/preferences.ui.h:15 -msgid "Remember _position" +#, fuzzy +msgid "Remember _size" msgstr "_Positie onthouden" #: ../src/resources/preferences.ui.h:16 +msgid "Remember _position" +msgstr "_Positie onthouden" + +#: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "Beginnen aan _bovenkant" -#: ../src/resources/preferences.ui.h:17 +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Venster" @@ -305,6 +383,16 @@ msgid "Speed:" msgstr "Snelheid:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Een bestand openen" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "Afs_pelen" + +#~ msgid "[FILE]" +#~ msgstr "[BESTAND]" + +#~ msgid "Minimal audio player for manual speech transcription" +#~ msgstr "Minimale audiospeler voor handmatige spraaktranscriptie" diff -Nru parlatype-1.5.4/po/pl.po parlatype-1.5.6/po/pl.po --- parlatype-1.5.4/po/pl.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/po/pl.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,392 @@ +# Polish translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" +"POT-Creation-Date: 2018-06-04 14:33+0200\n" +"PO-Revision-Date: 2018-02-28 20:39+0000\n" +"Last-Translator: Piotr Drąg \n" +"Language-Team: Polish \n" +"Language: pl\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " +"|| n%100>=20) ? 1 : 2;\n" +"X-Launchpad-Export-Date: 2018-02-28 22:32+0000\n" +"X-Generator: Launchpad (build 18561)\n" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 +#: ../src/resources/window-headerbar.ui.h:1 +msgid "Parlatype" +msgstr "Parlatype" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 +msgid "Media player for manual speech transcription" +msgstr "Odtwarzacz multimedialny do ręcznej transkrypcji mowy" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 +msgid "" +"Parlatype is an easy to use media player. Its main purpose is to help you " +"transcribing speech." +msgstr "" +"Parlatype to łatwy w obsłudze odtwarzacz multimedialny. Jego głównym celem " +"jest pomoc przy transkrypcji mowy." + +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 +msgid "Transcription utility" +msgstr "Narzędzie do transkrypcji" + +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +msgid "Transcription;" +msgstr "Transkrypcja;" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "Narzędzia pomocnicze LibreOffice/Parlatype" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "Sterowanie programem Parlatype za pomocą makr pakietu LibreOffice" + +#: ../src/main.c:36 +msgid "Fatal error" +msgstr "Błąd krytyczny" + +#: ../src/main.c:40 +#, c-format +msgid "" +"Parlatype needs GStreamer 1.x to run. Please check your installation of " +"GStreamer and make sure you have the \"Good Plugins\" installed.\n" +"Parlatype will quit now, it received this error message: %s" +msgstr "" +"Parlatype wymaga biblioteki GStreamer 1.x do działania. Proszę sprawdzić " +"poprawność instalacji biblioteki GStreamer i upewnić się, że „Dobre wtyczki” " +"są zainstalowane.\n" +"Działanie Parlatype zostanie teraz zakończone. Otrzymano ten komunikat " +"o błędzie: %s" + +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Wyświetla wersję programu" + +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 +msgid "Recent Files" +msgstr "Ostatnio używane pliki" + +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 +msgid "_Cancel" +msgstr "_Anuluj" + +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 +msgid "_Open" +msgstr "_Otwórz" + +#: ../src/pt-app.c:90 ../src/pt-app.c:146 +msgid "All files" +msgstr "Wszystkie pliki" + +#: ../src/pt-app.c:131 +msgid "Open Audio File" +msgstr "Otwarcie pliku dźwiękowego" + +#: ../src/pt-app.c:145 +msgid "Audio files" +msgstr "Pliki dźwiękowe" + +#. Translators: %s is a detailed error message +#: ../src/pt-app.c:202 +#, c-format +msgid "Error opening help: %s" +msgstr "Błąd podczas otwierania pomocy: %s" + +#. Translators: This is part of the about box, followed by the +#. copyright holders of code from other projects. Instead of +#. "including" it could also say "with" or just "Code from +#. other projects:" +#: ../src/pt-app.c:220 +msgid "Including code from other projects:" +msgstr "Zawiera kod z innych projektów:" + +#: ../src/pt-app.c:238 +msgid "A basic transcription utility" +msgstr "Podstawowe narzędzie do transkrypcji" + +#: ../src/pt-app.c:242 +msgid "translator-credits" +msgstr "" +"Launchpad Contributions:\n" +" Piotr Drąg https://launchpad.net/~piotrdrag\n" +" tydell https://launchpad.net/~marcin-tydelski" + +#: ../src/pt-app.c:424 +#, c-format +msgid "" +"Warning: Parlatype handles only one file at a time. The other files are " +"ignored.\n" +msgstr "" +"Ostrzeżenie: Parlatype obsługuje tylko jeden plik naraz. Pozostałe pliki są " +"ignorowane.\n" + +#. Translators: This is a time format, like "2:05:30" for 2 +#. hours, 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-goto-dialog.c:49 +#, c-format +msgctxt "long time format" +msgid "%d:%02d:%02d" +msgstr "%d∶%02d∶%02d" + +#. Translators: This is part of the Preferences dialog +#. or the "Go to ..." dialog. There is a label like +#. "Jump back:", "Jump forward:", "Jump back on pause:" +#. or "Go to position:" before. +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 +msgid "second" +msgid_plural "seconds" +msgstr[0] "sekunda" +msgstr[1] "sekundy" +msgstr[2] "sekund" + +#: ../src/pt-preferences.c:193 +msgid "_Close" +msgstr "Za_mknij" + +#: ../src/pt-window.c:296 +#, c-format +msgid "Jump back 1 second" +msgid_plural "Jump back %d seconds" +msgstr[0] "Przejdź wstecz o 1 sekundę" +msgstr[1] "Przejdź wstecz o %d sekundy" +msgstr[2] "Przejdź wstecz o %d sekund" + +#: ../src/pt-window.c:311 +#, c-format +msgid "Jump forward 1 second" +msgid_plural "Jump forward %d seconds" +msgstr[0] "Przejdź naprzód o 1 sekundę" +msgstr[1] "Przejdź naprzód o %d sekundy" +msgstr[2] "Przejdź naprzód o %d sekund" + +#: ../src/pt-window.c:328 +msgid "Pause" +msgstr "Wstrzymaj" + +#: ../src/pt-window.c:331 +#, c-format +msgid "Pause and rewind 1 second" +msgid_plural "Pause and rewind %d seconds" +msgstr[0] "Wstrzymaj i przewiń o 1 sekundę" +msgstr[1] "Wstrzymaj i przewiń o %d sekundy" +msgstr[2] "Wstrzymaj i przewiń o %d sekund" + +#: ../src/pt-window.c:338 +msgid "Start playing" +msgstr "Rozpocznij odtwarzanie" + +#: ../src/pt-window.c:991 +msgid "View follows cursor" +msgstr "Widok podąża za kursorem" + +#: ../src/pt-window.c:993 +msgid "Click to follow cursor" +msgstr "Kliknięcie podąża za kursorem" + +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 +msgid "Go to ..." +msgstr "Przejdź do…" + +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_OK" + +#: ../src/resources/goto-dialog.ui.h:4 +msgid "Go to position:" +msgstr "Przejście do pozycji:" + +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "Ogólne" + +#: ../src/resources/help-overlay.ui.h:2 +msgid "Open a media file" +msgstr "Otwórz plik multimedialny" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "Otwórz ostatnio używane pliki multimedialne" + +#: ../src/resources/help-overlay.ui.h:4 +msgid "Show/hide action menu" +msgstr "Wyświetl/ukryj menu działań" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Zakończ" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "Przebieg fali" + +#: ../src/resources/help-overlay.ui.h:7 +msgid "Play/Pause" +msgstr "Odtwórz/wstrzymaj" + +#: ../src/resources/help-overlay.ui.h:8 +msgid "Jump back" +msgstr "Przejdź wstecz" + +#: ../src/resources/help-overlay.ui.h:9 +msgid "Jump forward" +msgstr "Przejdź naprzód" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "Powiększ" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "Pomniejsz" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "Otwórz okno „Przejście do”" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "Skopiuj czas do schowka" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "Przejdź do czasu w schowku" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Pomoc" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "Wyświetl pomoc" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "Wyświetl skróty klawiszowe" + +#: ../src/resources/menus.ui.h:1 +msgid "Open File" +msgstr "Otwórz plik" + +#: ../src/resources/menus.ui.h:3 +msgid "Preferences" +msgstr "Preferencje" + +#: ../src/resources/menus.ui.h:4 +msgid "_Keyboard Shortcuts" +msgstr "_Skróty klawiszowe" + +#: ../src/resources/menus.ui.h:6 +msgid "Info" +msgstr "Informacje" + +#: ../src/resources/menus.ui.h:8 +msgid "Copy timestamp" +msgstr "Skopiuj czas" + +#: ../src/resources/menus.ui.h:9 +msgid "Insert timestamp" +msgstr "Wstaw czas" + +#: ../src/resources/menus.ui.h:11 +msgid "_File" +msgstr "_Plik" + +#: ../src/resources/menus.ui.h:12 +msgid "_Edit" +msgstr "_Edycja" + +#: ../src/resources/menus.ui.h:13 +msgid "_Help" +msgstr "Pomo_c" + +#: ../src/resources/preferences.ui.h:1 +msgid "Parlatype Preferences" +msgstr "Preferencje programu Parlatype" + +#: ../src/resources/preferences.ui.h:2 +msgid "_Pixels per second:" +msgstr "_Piksele na sekundę:" + +#: ../src/resources/preferences.ui.h:3 +msgid "Show _time scale" +msgstr "Podziałka _czasu" + +#. Resolution of the waveform image +#: ../src/resources/preferences.ui.h:5 +msgid "Resolution" +msgstr "Rozdzielczość" + +#. A section in preferences, how to display the waveform. +#: ../src/resources/preferences.ui.h:7 +msgid "Display" +msgstr "Wyświetlanie" + +#: ../src/resources/preferences.ui.h:8 +msgid "_Moving cursor" +msgstr "_Kursor się porusza" + +#: ../src/resources/preferences.ui.h:9 +msgid "_Fixed cursor" +msgstr "_Stały kursor" + +#: ../src/resources/preferences.ui.h:11 +msgid "Jump back on _pause:" +msgstr "Przejście _wstecz przy wstrzymaniu:" + +#: ../src/resources/preferences.ui.h:12 +msgid "Jump _back:" +msgstr "Prz_ejście wstecz:" + +#: ../src/resources/preferences.ui.h:13 +msgid "Jump _forward:" +msgstr "Przejście _naprzód:" + +#: ../src/resources/preferences.ui.h:14 +msgid "Controls" +msgstr "Sterowanie" + +#: ../src/resources/preferences.ui.h:15 +msgid "Remember _size" +msgstr "Pamiętanie _rozmiaru" + +#: ../src/resources/preferences.ui.h:16 +msgid "Remember _position" +msgstr "Pamiętanie p_ozycji" + +#: ../src/resources/preferences.ui.h:17 +msgid "Start on _top" +msgstr "_Uruchamianie zawsze na wierzchu" + +#: ../src/resources/preferences.ui.h:18 +msgid "Window" +msgstr "Okno" + +#: ../src/resources/window.ui.h:2 +msgid "Speed:" +msgstr "Prędkość:" + +#: ../src/resources/window-headerbar.ui.h:3 +msgid "Open a file" +msgstr "Otwiera plik" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Odtwórz" diff -Nru parlatype-1.5.4/po/pt_BR.po parlatype-1.5.6/po/pt_BR.po --- parlatype-1.5.4/po/pt_BR.po 2017-11-10 16:26:02.000000000 +0000 +++ parlatype-1.5.6/po/pt_BR.po 2018-06-17 20:35:03.000000000 +0000 @@ -6,10 +6,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-16 21:45+0100\n" +"POT-Creation-Date: 2018-06-04 14:19+0200\n" "PO-Revision-Date: 2017-01-17 12:06+0000\n" "Last-Translator: André \"decko\" de Brito \n" "Language-Team: Brazilian Portuguese \n" +"Language: pt_BR\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -17,86 +18,88 @@ "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 -#: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Um tocador de midia para transcrição manual de voz" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" -"Parlatype é um tocador de midia fácil de usar. Seu propósito é ajudar você " -"a transcrever voz." +"Parlatype é um tocador de midia fácil de usar. Seu propósito é ajudar você a " +"transcrever voz." -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Utilitário de transcrição" -#: ../src/main.c:42 -msgid "Show the application's version" -msgstr "Mostrar a versão da aplicação" +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +#, fuzzy +msgid "Transcription;" +msgstr "Utilitário de transcrição" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" -#: ../src/main.c:58 +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "" + +#: ../src/main.c:36 msgid "Fatal error" msgstr "Erro fatal" -#: ../src/main.c:62 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" -"Parlatype necessita de GStreamer 1.x para todar. Verifique sua instalação " -"do GStreamer e tenha certeza de ter o \"Good Plugins\" instalado.\n" +"Parlatype necessita de GStreamer 1.x para todar. Verifique sua instalação do " +"GStreamer e tenha certeza de ter o \"Good Plugins\" instalado.\n" "Parlatype irá fechar agora, ele recebeu a seguinte mensagem de erro: %s" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:84 -msgid "[FILE]" -msgstr "[ARQUIVO]" - -#: ../src/main.c:87 -msgid "Minimal audio player for manual speech transcription" -msgstr "Um tocar de audio minimalista para transcrição manual de voz" +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Mostrar a versão da aplicação" -#: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Arquivos recentes" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Cancelar" -#: ../src/pt-app.c:60 ../src/pt-app.c:117 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Abrir" -#: ../src/pt-app.c:72 ../src/pt-app.c:128 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Todos os arquivos" -#: ../src/pt-app.c:113 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Abrir Arquivo de Áudio" -#: ../src/pt-app.c:127 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "Arquivos de áudio" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:176 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Erro abrindo a ajuda: %s" @@ -105,22 +108,22 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:194 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Incluindo código de outros projetos:" -#: ../src/pt-app.c:212 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Um utilitário basico de transcrição" -#: ../src/pt-app.c:216 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "André \"decko\" de Brito \n" "Launchpad Contributions:\n" " Vitor Loureiro https://launchpad.net/~hardsargent128" -#: ../src/pt-app.c:369 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -143,62 +146,140 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "segundo" msgstr[1] "segundos" -#: ../src/pt-preferences.c:164 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Fechar" -#: ../src/pt-window.c:218 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Voltar 1 segundo" msgstr[1] "Voltar %d segundos" -#: ../src/pt-window.c:232 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Avançar 1 segundo" msgstr[1] "Avançar %d segundos" -#: ../src/pt-window.c:247 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Pausa" -#: ../src/pt-window.c:250 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pause e volte 1 segundo" msgstr[1] "Pause e volte %d segundos" -#: ../src/pt-window.c:256 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Começar a tocar" -#: ../src/pt-window.c:727 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "Visualização segue o cursor" -#: ../src/pt-window.c:729 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Clique para seguir o cursor" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Ir para ..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_OK" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Ir para a posição:" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +#, fuzzy +msgid "Open a media file" +msgstr "Abrir um arquivo" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +#, fuzzy +msgid "Show/hide action menu" +msgstr "Mostrar a versão da aplicação" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Sair" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "Forma de onda" + +#: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Pausa" + +#: ../src/resources/help-overlay.ui.h:8 +#, fuzzy +msgid "Jump back" +msgstr "Volta_r:" + +#: ../src/resources/help-overlay.ui.h:9 +#, fuzzy +msgid "Jump forward" +msgstr "A_vançar:" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +#, fuzzy +msgid "Copy timestamp to clipboard" +msgstr "Copiar timestamp" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Ajuda" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Abrir o Arquivo" @@ -208,34 +289,30 @@ msgstr "Preferências" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "Ajuda" +msgid "_Keyboard Shortcuts" +msgstr "" -#: ../src/resources/menus.ui.h:5 +#: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Informação" -#: ../src/resources/menus.ui.h:6 -msgid "Quit" -msgstr "Sair" - -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Copiar timestamp" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Inserir timestamp" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Arquivo" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Editar" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "A_juda" @@ -269,10 +346,6 @@ msgid "_Fixed cursor" msgstr "Cursor _fixo" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "Forma de onda" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Voltar quando _pausar:" @@ -290,14 +363,19 @@ msgstr "Controles" #: ../src/resources/preferences.ui.h:15 -msgid "Remember _position" +#, fuzzy +msgid "Remember _size" msgstr "Lembrar _posição" #: ../src/resources/preferences.ui.h:16 +msgid "Remember _position" +msgstr "Lembrar _posição" + +#: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "Iniciar no _topo" -#: ../src/resources/preferences.ui.h:17 +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Janela" @@ -305,6 +383,16 @@ msgid "Speed:" msgstr "Velocidade:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Abrir um arquivo" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Reproduzir" + +#~ msgid "[FILE]" +#~ msgstr "[ARQUIVO]" + +#~ msgid "Minimal audio player for manual speech transcription" +#~ msgstr "Um tocar de audio minimalista para transcrição manual de voz" diff -Nru parlatype-1.5.4/po/pt.po parlatype-1.5.6/po/pt.po --- parlatype-1.5.4/po/pt.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/pt.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-01-16 21:45+0100\n" +"POT-Creation-Date: 2018-06-04 14:17+0200\n" "PO-Revision-Date: 2017-01-17 12:06+0000\n" "Last-Translator: Vitor Loureiro \n" "Language-Team: Portuguese \n" +"Language: pt\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -18,36 +19,44 @@ "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 -#: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "" -#: ../src/main.c:42 -msgid "Show the application's version" -msgstr "Mostrar a versão da aplicação" +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +msgid "Transcription;" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" -#: ../src/main.c:58 +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "" + +#: ../src/main.c:36 msgid "Fatal error" msgstr "Erro fatal" -#: ../src/main.c:62 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " @@ -55,44 +64,37 @@ "Parlatype will quit now, it received this error message: %s" msgstr "" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:84 -msgid "[FILE]" -msgstr "[FICHEIRO]" - -#: ../src/main.c:87 -msgid "Minimal audio player for manual speech transcription" -msgstr "" +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Mostrar a versão da aplicação" -#: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Ficheiros recentes" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Cancelar" -#: ../src/pt-app.c:60 ../src/pt-app.c:117 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Abrir" -#: ../src/pt-app.c:72 ../src/pt-app.c:128 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Todos os ficheiros" -#: ../src/pt-app.c:113 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Abrir Ficheiro Áudio" -#: ../src/pt-app.c:127 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "Ficheiros áudio" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:176 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "" @@ -101,21 +103,21 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:194 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "" -#: ../src/pt-app.c:212 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "" -#: ../src/pt-app.c:216 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Vitor Loureiro https://launchpad.net/~hardsargent128" -#: ../src/pt-app.c:369 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -136,62 +138,137 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "segundo" msgstr[1] "segundos" -#: ../src/pt-preferences.c:164 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Fechar" -#: ../src/pt-window.c:218 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:232 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:247 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Pausa" -#: ../src/pt-window.c:250 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "" msgstr[1] "" -#: ../src/pt-window.c:256 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Começar a tocar" -#: ../src/pt-window.c:727 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "" -#: ../src/pt-window.c:729 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "" -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_Aceitar" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +#, fuzzy +msgid "Open a media file" +msgstr "Abrir um ficheiro" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +#, fuzzy +msgid "Show/hide action menu" +msgstr "Mostrar a versão da aplicação" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Sair" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "Forma de onda" + +#: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Pausa" + +#: ../src/resources/help-overlay.ui.h:8 +msgid "Jump back" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:9 +msgid "Jump forward" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Ajuda" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Abrir o Ficheiro" @@ -201,34 +278,30 @@ msgstr "Preferências" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "Ajuda" +msgid "_Keyboard Shortcuts" +msgstr "" -#: ../src/resources/menus.ui.h:5 +#: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Informação" -#: ../src/resources/menus.ui.h:6 -msgid "Quit" -msgstr "Sair" - -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Ficheiro" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Editar" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Ajuda" @@ -262,10 +335,6 @@ msgid "_Fixed cursor" msgstr "" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "Forma de onda" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" @@ -283,14 +352,18 @@ msgstr "Controlos" #: ../src/resources/preferences.ui.h:15 -msgid "Remember _position" +msgid "Remember _size" msgstr "" #: ../src/resources/preferences.ui.h:16 -msgid "Start on _top" +msgid "Remember _position" msgstr "" #: ../src/resources/preferences.ui.h:17 +msgid "Start on _top" +msgstr "" + +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Janela" @@ -298,6 +371,13 @@ msgid "Speed:" msgstr "Velocidade:" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "Abrir um ficheiro" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Reproduzir" + +#~ msgid "[FILE]" +#~ msgstr "[FICHEIRO]" diff -Nru parlatype-1.5.4/po/sk.po parlatype-1.5.6/po/sk.po --- parlatype-1.5.4/po/sk.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/po/sk.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,375 @@ +# Slovak translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" +"POT-Creation-Date: 2018-06-04 14:20+0200\n" +"PO-Revision-Date: 2017-11-23 21:18+0000\n" +"Last-Translator: Launchpad Translations Administrators \n" +"Language-Team: Slovak \n" +"Language: sk\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 1 : (n>=2 && n<=4) ? 2 : 0;\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 +#: ../src/resources/window-headerbar.ui.h:1 +msgid "Parlatype" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 +msgid "Media player for manual speech transcription" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 +msgid "" +"Parlatype is an easy to use media player. Its main purpose is to help you " +"transcribing speech." +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 +msgid "Transcription utility" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +msgid "Transcription;" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "" + +#: ../src/main.c:36 +msgid "Fatal error" +msgstr "" + +#: ../src/main.c:40 +#, c-format +msgid "" +"Parlatype needs GStreamer 1.x to run. Please check your installation of " +"GStreamer and make sure you have the \"Good Plugins\" installed.\n" +"Parlatype will quit now, it received this error message: %s" +msgstr "" + +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "" + +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 +msgid "Recent Files" +msgstr "" + +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 +msgid "_Cancel" +msgstr "_Zrušiť" + +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 +msgid "_Open" +msgstr "_Otvoriť" + +#: ../src/pt-app.c:90 ../src/pt-app.c:146 +msgid "All files" +msgstr "" + +#: ../src/pt-app.c:131 +msgid "Open Audio File" +msgstr "" + +#: ../src/pt-app.c:145 +msgid "Audio files" +msgstr "" + +#. Translators: %s is a detailed error message +#: ../src/pt-app.c:202 +#, c-format +msgid "Error opening help: %s" +msgstr "" + +#. Translators: This is part of the about box, followed by the +#. copyright holders of code from other projects. Instead of +#. "including" it could also say "with" or just "Code from +#. other projects:" +#: ../src/pt-app.c:220 +msgid "Including code from other projects:" +msgstr "" + +#: ../src/pt-app.c:238 +msgid "A basic transcription utility" +msgstr "" + +#: ../src/pt-app.c:242 +msgid "translator-credits" +msgstr "" + +#: ../src/pt-app.c:424 +#, c-format +msgid "" +"Warning: Parlatype handles only one file at a time. The other files are " +"ignored.\n" +msgstr "" + +#. Translators: This is a time format, like "2:05:30" for 2 +#. hours, 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-goto-dialog.c:49 +#, c-format +msgctxt "long time format" +msgid "%d:%02d:%02d" +msgstr "" + +#. Translators: This is part of the Preferences dialog +#. or the "Go to ..." dialog. There is a label like +#. "Jump back:", "Jump forward:", "Jump back on pause:" +#. or "Go to position:" before. +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 +msgid "second" +msgid_plural "seconds" +msgstr[0] "" +msgstr[1] "" + +#: ../src/pt-preferences.c:193 +msgid "_Close" +msgstr "" + +#: ../src/pt-window.c:296 +#, c-format +msgid "Jump back 1 second" +msgid_plural "Jump back %d seconds" +msgstr[0] "" +msgstr[1] "" + +#: ../src/pt-window.c:311 +#, c-format +msgid "Jump forward 1 second" +msgid_plural "Jump forward %d seconds" +msgstr[0] "" +msgstr[1] "" + +#: ../src/pt-window.c:328 +msgid "Pause" +msgstr "" + +#: ../src/pt-window.c:331 +#, c-format +msgid "Pause and rewind 1 second" +msgid_plural "Pause and rewind %d seconds" +msgstr[0] "" +msgstr[1] "" + +#: ../src/pt-window.c:338 +msgid "Start playing" +msgstr "" + +#: ../src/pt-window.c:991 +msgid "View follows cursor" +msgstr "" + +#: ../src/pt-window.c:993 +msgid "Click to follow cursor" +msgstr "" + +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 +msgid "Go to ..." +msgstr "" + +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_Ok" + +#: ../src/resources/goto-dialog.ui.h:4 +msgid "Go to position:" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +msgid "Open a media file" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +msgid "Show/hide action menu" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:7 +msgid "Play/Pause" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:8 +msgid "Jump back" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:9 +msgid "Jump forward" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + +#: ../src/resources/menus.ui.h:1 +msgid "Open File" +msgstr "" + +#: ../src/resources/menus.ui.h:3 +msgid "Preferences" +msgstr "" + +#: ../src/resources/menus.ui.h:4 +msgid "_Keyboard Shortcuts" +msgstr "" + +#: ../src/resources/menus.ui.h:6 +msgid "Info" +msgstr "" + +#: ../src/resources/menus.ui.h:8 +msgid "Copy timestamp" +msgstr "" + +#: ../src/resources/menus.ui.h:9 +msgid "Insert timestamp" +msgstr "" + +#: ../src/resources/menus.ui.h:11 +msgid "_File" +msgstr "" + +#: ../src/resources/menus.ui.h:12 +msgid "_Edit" +msgstr "" + +#: ../src/resources/menus.ui.h:13 +msgid "_Help" +msgstr "" + +#: ../src/resources/preferences.ui.h:1 +msgid "Parlatype Preferences" +msgstr "" + +#: ../src/resources/preferences.ui.h:2 +msgid "_Pixels per second:" +msgstr "" + +#: ../src/resources/preferences.ui.h:3 +msgid "Show _time scale" +msgstr "" + +#. Resolution of the waveform image +#: ../src/resources/preferences.ui.h:5 +msgid "Resolution" +msgstr "" + +#. A section in preferences, how to display the waveform. +#: ../src/resources/preferences.ui.h:7 +msgid "Display" +msgstr "" + +#: ../src/resources/preferences.ui.h:8 +msgid "_Moving cursor" +msgstr "" + +#: ../src/resources/preferences.ui.h:9 +msgid "_Fixed cursor" +msgstr "" + +#: ../src/resources/preferences.ui.h:11 +msgid "Jump back on _pause:" +msgstr "" + +#: ../src/resources/preferences.ui.h:12 +msgid "Jump _back:" +msgstr "" + +#: ../src/resources/preferences.ui.h:13 +msgid "Jump _forward:" +msgstr "" + +#: ../src/resources/preferences.ui.h:14 +msgid "Controls" +msgstr "" + +#: ../src/resources/preferences.ui.h:15 +msgid "Remember _size" +msgstr "" + +#: ../src/resources/preferences.ui.h:16 +msgid "Remember _position" +msgstr "" + +#: ../src/resources/preferences.ui.h:17 +msgid "Start on _top" +msgstr "" + +#: ../src/resources/preferences.ui.h:18 +msgid "Window" +msgstr "" + +#: ../src/resources/window.ui.h:2 +msgid "Speed:" +msgstr "" + +#: ../src/resources/window-headerbar.ui.h:3 +msgid "Open a file" +msgstr "" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Hrať" diff -Nru parlatype-1.5.4/po/sr.po parlatype-1.5.6/po/sr.po --- parlatype-1.5.4/po/sr.po 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/po/sr.po 2018-06-17 20:35:03.000000000 +0000 @@ -7,30 +7,31 @@ msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" -"POT-Creation-Date: 2017-04-18 20:55+0200\n" +"POT-Creation-Date: 2018-06-04 14:23+0200\n" "PO-Revision-Date: 2017-06-25 21:09+0000\n" "Last-Translator: Томица Кораћ \n" "Language-Team: Serbian \n" +"Language: sr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " -"n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" +"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" +"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2017-06-29 09:44+0000\n" "X-Generator: Launchpad (build 18418)\n" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:1 -#: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:65 -#: ../src/pt-app.c:216 ../src/resources/window.ui.h:1 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Парлатајп" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:2 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Плејер за ручно записивање говора" -#: ../data/org.gnome.parlatype.appdata.xml.in.h:3 +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." @@ -38,19 +39,28 @@ "Паратајп је медија плејер лак за употребу. Његова главна намена је помоћ при " "транскрибовању." -#: ../data/org.gnome.parlatype.desktop.in.h:2 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Алат за транскрипцију." -#: ../src/main.c:43 -msgid "Show the application's version" -msgstr "Прикажи верзију апликације." +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +#, fuzzy +msgid "Transcription;" +msgstr "Алат за транскрипцију." + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" -#: ../src/main.c:59 +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "" + +#: ../src/main.c:36 msgid "Fatal error" msgstr "Кобна грешка" -#: ../src/main.c:63 +#: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " @@ -61,44 +71,37 @@ "потврдите јесу ли инсталирани „добри плагинови“.\n" "Парлатајп ће се сада угасити, пријављена је следећа грешка: %s" -#. Translators: This is part of the output if you type `parlatype --help` -#. in terminal. The square brackets indicate that a file (filename) is -#. an optional argument for parlatype. Arguments in help output are usually -#. uppercase. -#: ../src/main.c:87 -msgid "[FILE]" -msgstr "[ФАЈЛ]" - -#: ../src/main.c:90 -msgid "Minimal audio player for manual speech transcription" -msgstr "Мали аудио плејер за ручну транскрипцију" +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Прикажи верзију апликације." -#: ../src/pt-app.c:56 ../src/resources/menus.ui.h:2 +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Недавни фајлови" -#: ../src/pt-app.c:58 ../src/pt-app.c:115 +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 msgid "_Cancel" msgstr "_Откажи" -#: ../src/pt-app.c:59 ../src/pt-app.c:116 +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 msgid "_Open" msgstr "_Отвори" -#: ../src/pt-app.c:71 ../src/pt-app.c:127 +#: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Сви фајлови" -#: ../src/pt-app.c:112 +#: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Отвори звучни фајл" -#: ../src/pt-app.c:126 +#: ../src/pt-app.c:145 msgid "Audio files" msgstr "Звучни фајлови" #. Translators: %s is a detailed error message -#: ../src/pt-app.c:183 +#: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Грешка при отварању помоћи: %s" @@ -107,21 +110,21 @@ #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" -#: ../src/pt-app.c:201 +#: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Код из осталих пројеката:" -#: ../src/pt-app.c:219 +#: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Основни алат за транскрипцију" -#: ../src/pt-app.c:223 +#: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Томица Кораћ https://launchpad.net/~tomak-delijeonline" -#: ../src/pt-app.c:394 +#: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " @@ -144,19 +147,19 @@ #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. -#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 -#: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 msgid "second" msgid_plural "seconds" msgstr[0] "секунду" msgstr[1] "sekundi" msgstr[2] "sekundi" -#: ../src/pt-preferences.c:169 +#: ../src/pt-preferences.c:193 msgid "_Close" msgstr "_Close" -#: ../src/pt-window.c:273 +#: ../src/pt-window.c:296 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" @@ -164,7 +167,7 @@ msgstr[1] "Врати се %d секунде" msgstr[2] "Врати се %d секунди" -#: ../src/pt-window.c:288 +#: ../src/pt-window.c:311 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" @@ -172,11 +175,11 @@ msgstr[1] "Прескочи %d секунде" msgstr[2] "Прескочи %d секунди" -#: ../src/pt-window.c:305 +#: ../src/pt-window.c:328 msgid "Pause" msgstr "Pauza" -#: ../src/pt-window.c:308 +#: ../src/pt-window.c:331 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" @@ -184,26 +187,104 @@ msgstr[1] "Застани и врати %d секунде" msgstr[2] "Застани и врати %d секунди" -#: ../src/pt-window.c:315 +#: ../src/pt-window.c:338 msgid "Start playing" msgstr "Покрени" -#: ../src/pt-window.c:804 +#: ../src/pt-window.c:991 msgid "View follows cursor" msgstr "Приказ прати курсор" -#: ../src/pt-window.c:806 +#: ../src/pt-window.c:993 msgid "Click to follow cursor" msgstr "Кликни да пратиш курсор" -#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Иди на..." -#: ../src/resources/goto-dialog.ui.h:2 +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "У _реду" + +#: ../src/resources/goto-dialog.ui.h:4 msgid "Go to position:" msgstr "Иди на положај:" +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:2 +#, fuzzy +msgid "Open a media file" +msgstr "Отвори звучни фајл" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:4 +#, fuzzy +msgid "Show/hide action menu" +msgstr "Прикажи верзију апликације." + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Излаз" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Pauza" + +#: ../src/resources/help-overlay.ui.h:8 +#, fuzzy +msgid "Jump back" +msgstr "Врати се 1 секунду" + +#: ../src/resources/help-overlay.ui.h:9 +#, fuzzy +msgid "Jump forward" +msgstr "Прескочи 1 секунду" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:13 +#, fuzzy +msgid "Copy timestamp to clipboard" +msgstr "Копирај време" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Помоћ" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "" + #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Отвори фајл" @@ -213,34 +294,30 @@ msgstr "Поставке" #: ../src/resources/menus.ui.h:4 -msgid "Help" -msgstr "Помоћ" +msgid "_Keyboard Shortcuts" +msgstr "" -#: ../src/resources/menus.ui.h:5 +#: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Подаци" -#: ../src/resources/menus.ui.h:6 -msgid "Quit" -msgstr "Излаз" - -#: ../src/resources/menus.ui.h:7 +#: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Копирај време" -#: ../src/resources/menus.ui.h:8 +#: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Убаци време" -#: ../src/resources/menus.ui.h:10 +#: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Фајл" -#: ../src/resources/menus.ui.h:11 +#: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Измени" -#: ../src/resources/menus.ui.h:12 +#: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Помоћ" @@ -274,10 +351,6 @@ msgid "_Fixed cursor" msgstr "" -#: ../src/resources/preferences.ui.h:10 -msgid "Waveform" -msgstr "" - #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" @@ -295,14 +368,18 @@ msgstr "" #: ../src/resources/preferences.ui.h:15 -msgid "Remember _position" +msgid "Remember _size" msgstr "" #: ../src/resources/preferences.ui.h:16 -msgid "Start on _top" +msgid "Remember _position" msgstr "" #: ../src/resources/preferences.ui.h:17 +msgid "Start on _top" +msgstr "" + +#: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "" @@ -310,6 +387,16 @@ msgid "Speed:" msgstr "" -#: ../src/resources/window-headerbar.ui.h:2 +#: ../src/resources/window-headerbar.ui.h:3 msgid "Open a file" msgstr "" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "_Пусти" + +#~ msgid "[FILE]" +#~ msgstr "[ФАЈЛ]" + +#~ msgid "Minimal audio player for manual speech transcription" +#~ msgstr "Мали аудио плејер за ручну транскрипцију" diff -Nru parlatype-1.5.4/po/sv.po parlatype-1.5.6/po/sv.po --- parlatype-1.5.4/po/sv.po 1970-01-01 00:00:00.000000000 +0000 +++ parlatype-1.5.6/po/sv.po 2018-06-17 20:35:03.000000000 +0000 @@ -0,0 +1,384 @@ +# Swedish translation for parlatype +# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 +# This file is distributed under the same license as the parlatype package. +# FIRST AUTHOR , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: parlatype\n" +"Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" +"POT-Creation-Date: 2018-06-04 14:24+0200\n" +"PO-Revision-Date: 2017-11-20 20:34+0000\n" +"Last-Translator: Tommy Brunn \n" +"Language-Team: Swedish \n" +"Language: sv\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=n != 1;\n" +"X-Launchpad-Export-Date: 2018-02-28 19:00+0000\n" +"X-Generator: Launchpad (build 18561)\n" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 +#: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 +#: ../src/resources/window-headerbar.ui.h:1 +msgid "Parlatype" +msgstr "Parlatype" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 +msgid "Media player for manual speech transcription" +msgstr "Mediaspelare för manuell transkribering" + +#: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 +msgid "" +"Parlatype is an easy to use media player. Its main purpose is to help you " +"transcribing speech." +msgstr "" +"Parlatype är en lättanvänd mediaspelare vars främsta syfte är att assistera " +"vid transkribering av tal." + +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 +msgid "Transcription utility" +msgstr "Transkriberingsverktyg" + +#: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 +msgid "Transcription;" +msgstr "Transkribering;" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 +msgid "LibreOffice/Parlatype Helpers" +msgstr "" + +#: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 +msgid "Control Parlatype using LibreOffice macros" +msgstr "Styr Parlatype med LibreOffice-makron" + +#: ../src/main.c:36 +msgid "Fatal error" +msgstr "Allvarligt fel" + +#: ../src/main.c:40 +#, c-format +msgid "" +"Parlatype needs GStreamer 1.x to run. Please check your installation of " +"GStreamer and make sure you have the \"Good Plugins\" installed.\n" +"Parlatype will quit now, it received this error message: %s" +msgstr "" + +#: ../src/pt-app.c:55 +msgid "Show the application's version" +msgstr "Visa programmets version" + +#: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 +msgid "Recent Files" +msgstr "Senaste filer" + +#: ../src/pt-app.c:77 ../src/pt-app.c:134 ../src/resources/goto-dialog.ui.h:2 +msgid "_Cancel" +msgstr "_Avbryt" + +#: ../src/pt-app.c:78 ../src/pt-app.c:135 +#: ../src/resources/window-headerbar.ui.h:2 +msgid "_Open" +msgstr "_Öppna" + +#: ../src/pt-app.c:90 ../src/pt-app.c:146 +msgid "All files" +msgstr "Alla filer" + +#: ../src/pt-app.c:131 +msgid "Open Audio File" +msgstr "Öppna ljudfil" + +#: ../src/pt-app.c:145 +msgid "Audio files" +msgstr "Ljudfiler" + +#. Translators: %s is a detailed error message +#: ../src/pt-app.c:202 +#, c-format +msgid "Error opening help: %s" +msgstr "" + +#. Translators: This is part of the about box, followed by the +#. copyright holders of code from other projects. Instead of +#. "including" it could also say "with" or just "Code from +#. other projects:" +#: ../src/pt-app.c:220 +msgid "Including code from other projects:" +msgstr "Med kod från andra projekt:" + +#: ../src/pt-app.c:238 +msgid "A basic transcription utility" +msgstr "Ett enkelt transkriberingsverktyg" + +#: ../src/pt-app.c:242 +msgid "translator-credits" +msgstr "" +"Launchpad Contributions:\n" +" Tommy Brunn https://launchpad.net/~tommybrunn" + +#: ../src/pt-app.c:424 +#, c-format +msgid "" +"Warning: Parlatype handles only one file at a time. The other files are " +"ignored.\n" +msgstr "" +"Varning: Parlatype hanterar endast en fil åt gången. Övriga filer " +"ignoreras.\n" + +#. Translators: This is a time format, like "2:05:30" for 2 +#. hours, 5 minutes, and 30 seconds. You may change ":" to +#. the separator that your locale uses or use "%Id" instead +#. of "%d" if your locale uses localized digits. +#: ../src/pt-goto-dialog.c:49 +#, c-format +msgctxt "long time format" +msgid "%d:%02d:%02d" +msgstr "%d:%02d:%02d" + +#. Translators: This is part of the Preferences dialog +#. or the "Go to ..." dialog. There is a label like +#. "Jump back:", "Jump forward:", "Jump back on pause:" +#. or "Go to position:" before. +#: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:62 +#: ../src/pt-preferences.c:72 ../src/pt-preferences.c:82 +msgid "second" +msgid_plural "seconds" +msgstr[0] "sekund" +msgstr[1] "sekunder" + +#: ../src/pt-preferences.c:193 +msgid "_Close" +msgstr "_Stäng" + +#: ../src/pt-window.c:296 +#, c-format +msgid "Jump back 1 second" +msgid_plural "Jump back %d seconds" +msgstr[0] "Spola tillbaka 1 sekund" +msgstr[1] "Spola tillbaka %d sekunder" + +#: ../src/pt-window.c:311 +#, c-format +msgid "Jump forward 1 second" +msgid_plural "Jump forward %d seconds" +msgstr[0] "Spola fram 1 sekund" +msgstr[1] "Spola fram %d sekunder" + +#: ../src/pt-window.c:328 +msgid "Pause" +msgstr "Pausa" + +#: ../src/pt-window.c:331 +#, c-format +msgid "Pause and rewind 1 second" +msgid_plural "Pause and rewind %d seconds" +msgstr[0] "Pausa och spola tillbaka 1 sekund" +msgstr[1] "Pausa och spola tillbaka %d sekunder" + +#: ../src/pt-window.c:338 +msgid "Start playing" +msgstr "Spela upp" + +#: ../src/pt-window.c:991 +msgid "View follows cursor" +msgstr "Fokus följer pekaren" + +#: ../src/pt-window.c:993 +msgid "Click to follow cursor" +msgstr "Klicka för att följa pekaren" + +#: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 +msgid "Go to ..." +msgstr "Gå till ..." + +#: ../src/resources/goto-dialog.ui.h:3 +msgid "_OK" +msgstr "_OK" + +#: ../src/resources/goto-dialog.ui.h:4 +msgid "Go to position:" +msgstr "Gå till position:" + +#: ../src/resources/help-overlay.ui.h:1 +msgid "General" +msgstr "Generellt" + +#: ../src/resources/help-overlay.ui.h:2 +msgid "Open a media file" +msgstr "Öppna mediafil" + +#: ../src/resources/help-overlay.ui.h:3 +msgid "Open recently used media files" +msgstr "Öppna senast använda mediafiler" + +#: ../src/resources/help-overlay.ui.h:4 +msgid "Show/hide action menu" +msgstr "Visa/dölj åtgärdsmeny" + +#: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 +msgid "Quit" +msgstr "Avsluta" + +#: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 +msgid "Waveform" +msgstr "Vågform" + +#: ../src/resources/help-overlay.ui.h:7 +#, fuzzy +msgid "Play/Pause" +msgstr "Pausa" + +#: ../src/resources/help-overlay.ui.h:8 +#, fuzzy +msgid "Jump back" +msgstr "Spola _tillbaka:" + +#: ../src/resources/help-overlay.ui.h:9 +#, fuzzy +msgid "Jump forward" +msgstr "Spola _framåt" + +#: ../src/resources/help-overlay.ui.h:10 +msgid "Zoom in" +msgstr "Zooma in" + +#: ../src/resources/help-overlay.ui.h:11 +msgid "Zoom out" +msgstr "Zooma ut" + +#: ../src/resources/help-overlay.ui.h:12 +msgid "Open “Go to” dialog" +msgstr "Öppna \"Gå till\"-dialog" + +#: ../src/resources/help-overlay.ui.h:13 +msgid "Copy timestamp to clipboard" +msgstr "Kopiera tidsmarkering till urklipp" + +#: ../src/resources/help-overlay.ui.h:14 +msgid "Go to timestamp in clipboard" +msgstr "Gå till tidsmarkering i urklipp" + +#: ../src/resources/help-overlay.ui.h:15 ../src/resources/menus.ui.h:5 +msgid "Help" +msgstr "Hjälp" + +#: ../src/resources/help-overlay.ui.h:16 +msgid "Show help" +msgstr "Visa hjälp" + +#: ../src/resources/help-overlay.ui.h:17 +msgid "Show keyboard shortcuts" +msgstr "Visa tangentbordsgenvägar" + +#: ../src/resources/menus.ui.h:1 +msgid "Open File" +msgstr "Öppna fil" + +#: ../src/resources/menus.ui.h:3 +msgid "Preferences" +msgstr "Inställningar" + +#: ../src/resources/menus.ui.h:4 +msgid "_Keyboard Shortcuts" +msgstr "_Tangentbordsgenvägar" + +#: ../src/resources/menus.ui.h:6 +msgid "Info" +msgstr "Information" + +#: ../src/resources/menus.ui.h:8 +msgid "Copy timestamp" +msgstr "Kopiera tidsmarkering" + +#: ../src/resources/menus.ui.h:9 +msgid "Insert timestamp" +msgstr "Lägg till tidsmarkering" + +#: ../src/resources/menus.ui.h:11 +msgid "_File" +msgstr "Arkiv" + +#: ../src/resources/menus.ui.h:12 +msgid "_Edit" +msgstr "_Redigera" + +#: ../src/resources/menus.ui.h:13 +msgid "_Help" +msgstr "_Hjälp" + +#: ../src/resources/preferences.ui.h:1 +msgid "Parlatype Preferences" +msgstr "Parlatype-inställningar" + +#: ../src/resources/preferences.ui.h:2 +msgid "_Pixels per second:" +msgstr "_Pixlar per sekund:" + +#: ../src/resources/preferences.ui.h:3 +msgid "Show _time scale" +msgstr "_Visa tidsskala" + +#. Resolution of the waveform image +#: ../src/resources/preferences.ui.h:5 +msgid "Resolution" +msgstr "Upplösning" + +#. A section in preferences, how to display the waveform. +#: ../src/resources/preferences.ui.h:7 +msgid "Display" +msgstr "Utseende" + +#: ../src/resources/preferences.ui.h:8 +msgid "_Moving cursor" +msgstr "_Rörlig pekare" + +#: ../src/resources/preferences.ui.h:9 +msgid "_Fixed cursor" +msgstr "_Fast pekare" + +#: ../src/resources/preferences.ui.h:11 +msgid "Jump back on _pause:" +msgstr "Spola tillbaka vid pause:" + +#: ../src/resources/preferences.ui.h:12 +msgid "Jump _back:" +msgstr "Spola _tillbaka:" + +#: ../src/resources/preferences.ui.h:13 +msgid "Jump _forward:" +msgstr "Spola _framåt" + +#: ../src/resources/preferences.ui.h:14 +msgid "Controls" +msgstr "Kontroller" + +#: ../src/resources/preferences.ui.h:15 +msgid "Remember _size" +msgstr "Kom ihåg _storlek" + +#: ../src/resources/preferences.ui.h:16 +msgid "Remember _position" +msgstr "Kom ihåg _position" + +#: ../src/resources/preferences.ui.h:17 +msgid "Start on _top" +msgstr "Starta med _fokus" + +#: ../src/resources/preferences.ui.h:18 +msgid "Window" +msgstr "Fönster" + +#: ../src/resources/window.ui.h:2 +msgid "Speed:" +msgstr "Hastighet:" + +#: ../src/resources/window-headerbar.ui.h:3 +msgid "Open a file" +msgstr "Öppna en fil" + +#: ../src/resources/window-headerbar.ui.h:4 +msgid "_Play" +msgstr "Spela _upp" diff -Nru parlatype-1.5.4/README.md parlatype-1.5.6/README.md --- parlatype-1.5.4/README.md 2017-11-19 09:34:00.000000000 +0000 +++ parlatype-1.5.6/README.md 2018-08-17 10:33:23.000000000 +0000 @@ -6,22 +6,37 @@ ### Dependencies -To install Parlatype from source you need these packages: make, autotools, intltool, gobject-introspection-1.0, gladeui-2.0, gtk-doc-tools, yelp-tools and finally gtk+-3.0 (minimum version 3.10) and gstreamer-1.0 with base plugins. +To build Parlatype from source you need these packages: +* make, autotools (autoconf, automake) +* intltool +* gobject-introspection-1.0 +* yelp-tools +* gtk+-3.0 (>= 3.10) +* gstreamer-1.0 +* gstreamer-plugins-base-1.0 + +Optional, depending on your configure options: +* gladeui-2.0 (>= 3.12.2; with `--enable-glade-catalog`) +* gtk-doc-tools (with `--enable-gtk-docs`) +* desktop-file-utils (if installed, this checks the desktop file) +* appstream-utils (if installed, this checks the appstream file) + +Required runtime dependencies: +* GTK+ 3 +* GStreamer +* GStreamer "Good" Plugins + +Optional runtime dependencies, to support MP3 files: +* GStreamer "Ugly" Plugins + +Optional runtime dependencies, if you want to use LibreOffice macros: +* LibreOffice (>= 4) +* libreoffice-script-provider-python (Debian only) -On a Debian based distro you can install these with: +On a Debian based distro you can install all these with: ``` -$ sudo apt-get install build-essential automake autoconf intltool libgirepository1.0-dev libgladeui-dev gtk-doc-tools yelp-tools libgtk-3-dev libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev -``` - -In order to run it needs at least Gtk+ 3.10 and GStreamer 1.0 with the set of “good” plugins. -The Debian based command is (but you probably have them already): -``` -$ sudo apt-get install libgtk-3-0 libgstreamer1.0-0 gstreamer1.0-plugins-good -``` -Parlatype plays every file that's supported by GStreamer. To play e.g. MP3 files you need the “ugly” plugins. -``` -$ sudo apt-get install gstreamer1.0-plugins-ugly +$ sudo apt-get install build-essential automake autoconf intltool libgirepository1.0-dev libgladeui-dev gtk-doc-tools yelp-tools libgtk-3-dev libgtk-3-0 libgstreamer1.0-dev libgstreamer1.0-0 libgstreamer-plugins-base1.0-dev gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly libreoffice-script-provider-python ``` @@ -33,7 +48,7 @@ * `--with-libreoffice`: install LibreOffice macros (default: yes) * `--enable-introspection`: install gobject introspection (default: yes) -* `--enable-tests`: build unit tests (default: yes) +* `--enable-tests`: build unit tests (default: yes) – please note that these tests need a runtime environment and will fail in a pure build environment * `--enable-gtk-doc`: install library documentation (default: no) * `--enable-glade-catalog`: install a glade catalog (default: no) * `--enable-code-coverage`: enable gcov/lcov code coverage (default: no) @@ -51,11 +66,11 @@ ``` #### From tarball -Download the latest release tarball from https://github.com/gkarsay/parlatype/releases/latest. Assuming it's version 1.5.4 and you want the program only: +Download the latest release tarball from https://github.com/gkarsay/parlatype/releases/latest. Assuming it's version 1.5.6 and you want the program only: ``` -$ wget https://github.com/gkarsay/parlatype/releases/download/v1.5.4/parlatype-1.5.4.tar.gz -$ tar -zxvf parlatype-1.5.4.tar.gz -$ cd parlatype-1.5.4/ +$ wget https://github.com/gkarsay/parlatype/releases/download/v1.5.6/parlatype-1.5.6.tar.gz +$ tar -zxvf parlatype-1.5.6.tar.gz +$ cd parlatype-1.5.6/ $ autoreconf # might be necessary $ ./configure --prefix=/usr --disable-introspection $ make diff -Nru parlatype-1.5.4/src/main.c parlatype-1.5.6/src/main.c --- parlatype-1.5.4/src/main.c 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/src/main.c 2018-06-17 20:35:03.000000000 +0000 @@ -19,7 +19,7 @@ #include #include #include /* setlocale */ -#include +#include #include "pt-app.h" diff -Nru parlatype-1.5.4/src/Makefile.am parlatype-1.5.6/src/Makefile.am --- parlatype-1.5.4/src/Makefile.am 2017-10-18 19:41:14.000000000 +0000 +++ parlatype-1.5.6/src/Makefile.am 2018-06-17 20:35:03.000000000 +0000 @@ -44,10 +44,6 @@ $(GTK_LIBS) AM_CPPFLAGS = \ - -I$(top_srcdir)/ \ - -I$(top_builddir)/ \ - -I$(top_srcdir)/libparlatype \ - -I$(top_builddir)/libparlatype \ -I$(top_srcdir)/libparlatype/src \ -I$(top_builddir)/libparlatype/src \ $(WARNINGCFLAGS) \ diff -Nru parlatype-1.5.4/src/Makefile.in parlatype-1.5.6/src/Makefile.in --- parlatype-1.5.4/src/Makefile.in 2017-11-19 15:49:26.000000000 +0000 +++ parlatype-1.5.6/src/Makefile.in 2018-08-17 10:45:10.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -15,7 +15,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -80,8 +90,6 @@ host_triplet = @host@ bin_PROGRAMS = parlatype$(EXEEXT) subdir = src -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ @@ -90,6 +98,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -171,6 +180,7 @@ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -192,7 +202,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ @@ -243,6 +252,7 @@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ @@ -325,6 +335,7 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -365,10 +376,6 @@ $(GTK_LIBS) AM_CPPFLAGS = \ - -I$(top_srcdir)/ \ - -I$(top_builddir)/ \ - -I$(top_srcdir)/libparlatype \ - -I$(top_builddir)/libparlatype \ -I$(top_srcdir)/libparlatype/src \ -I$(top_builddir)/libparlatype/src \ $(WARNINGCFLAGS) \ @@ -397,7 +404,6 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign src/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -721,6 +727,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am uninstall-binPROGRAMS +.PRECIOUS: Makefile + pt-resources.c: $(resource_xml) $(resource_files) $(AM_V_GEN)glib-compile-resources \ --target=$@ \ diff -Nru parlatype-1.5.4/src/pt-app.c parlatype-1.5.6/src/pt-app.c --- parlatype-1.5.4/src/pt-app.c 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/src/pt-app.c 2018-06-17 20:35:03.000000000 +0000 @@ -234,7 +234,7 @@ gtk_application_get_active_window (app), "program_name", _("Parlatype"), "version", PACKAGE_VERSION, - "copyright", "© Gabor Karsay 2016–2017", + "copyright", "© Gabor Karsay 2016–2018", "comments", _("A basic transcription utility"), "logo-icon-name", "com.github.gkarsay.parlatype", "authors", authors, diff -Nru parlatype-1.5.4/src/pt-dbus-service.c parlatype-1.5.6/src/pt-dbus-service.c --- parlatype-1.5.4/src/pt-dbus-service.c 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/src/pt-dbus-service.c 2018-06-17 20:35:03.000000000 +0000 @@ -18,7 +18,7 @@ #include "config.h" #include #include -#include +#include #include "pt-window.h" #include "pt-window-private.h" diff -Nru parlatype-1.5.4/src/pt-goto-dialog.c parlatype-1.5.6/src/pt-goto-dialog.c --- parlatype-1.5.4/src/pt-goto-dialog.c 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/src/pt-goto-dialog.c 2018-06-17 20:35:03.000000000 +0000 @@ -23,7 +23,7 @@ #include "config.h" #include #include -#include +#include #include "pt-goto-dialog.h" diff -Nru parlatype-1.5.4/src/pt-preferences.c parlatype-1.5.6/src/pt-preferences.c --- parlatype-1.5.4/src/pt-preferences.c 2017-11-07 18:25:10.000000000 +0000 +++ parlatype-1.5.6/src/pt-preferences.c 2018-06-17 20:35:03.000000000 +0000 @@ -18,8 +18,12 @@ #include "config.h" #include #include +#ifdef GDK_WINDOWING_X11 #include +#endif +#ifdef GDK_WINDOWING_WAYLAND #include +#endif #include "pt-preferences.h" diff -Nru parlatype-1.5.4/src/pt-resources.c parlatype-1.5.6/src/pt-resources.c --- parlatype-1.5.4/src/pt-resources.c 2017-11-18 21:22:34.000000000 +0000 +++ parlatype-1.5.6/src/pt-resources.c 2018-08-17 10:46:19.000000000 +0000 @@ -6,7 +6,7 @@ # define SECTION #endif -static const SECTION union { const guint8 data[40483]; const double alignment; void * const ptr;} parlatype_resource_data = { { +static const SECTION union { const guint8 data[42251]; const double alignment; void * const ptr;} parlatype_resource_data = { { 0x47, 0x56, 0x61, 0x72, 0x69, 0x61, 0x6e, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0xc4, 0x01, 0x00, 0x00, @@ -21,51 +21,51 @@ 0x0f, 0x00, 0x00, 0x00, 0x5a, 0x04, 0x9f, 0x20, 0x02, 0x00, 0x00, 0x00, 0xc4, 0x01, 0x00, 0x00, 0x09, 0x00, 0x76, 0x00, 0xd0, 0x01, 0x00, 0x00, - 0x60, 0x2b, 0x00, 0x00, 0x6f, 0xec, 0xff, 0x49, - 0x0b, 0x00, 0x00, 0x00, 0x60, 0x2b, 0x00, 0x00, - 0x0f, 0x00, 0x76, 0x00, 0x70, 0x2b, 0x00, 0x00, - 0x61, 0x38, 0x00, 0x00, 0xd6, 0x8d, 0x7d, 0x1f, - 0x05, 0x00, 0x00, 0x00, 0x61, 0x38, 0x00, 0x00, - 0x0a, 0x00, 0x4c, 0x00, 0x6c, 0x38, 0x00, 0x00, - 0x8c, 0x38, 0x00, 0x00, 0xd8, 0x50, 0x33, 0x5a, - 0x02, 0x00, 0x00, 0x00, 0x8c, 0x38, 0x00, 0x00, - 0x0e, 0x00, 0x76, 0x00, 0xa0, 0x38, 0x00, 0x00, - 0x30, 0x47, 0x00, 0x00, 0x41, 0xfb, 0x0d, 0x32, - 0x02, 0x00, 0x00, 0x00, 0x30, 0x47, 0x00, 0x00, - 0x06, 0x00, 0x4c, 0x00, 0x38, 0x47, 0x00, 0x00, - 0x3c, 0x47, 0x00, 0x00, 0x35, 0xc7, 0x82, 0x66, - 0x0c, 0x00, 0x00, 0x00, 0x3c, 0x47, 0x00, 0x00, - 0x08, 0x00, 0x4c, 0x00, 0x44, 0x47, 0x00, 0x00, - 0x48, 0x47, 0x00, 0x00, 0xd4, 0xb5, 0x02, 0x00, - 0xff, 0xff, 0xff, 0xff, 0x48, 0x47, 0x00, 0x00, - 0x01, 0x00, 0x4c, 0x00, 0x4c, 0x47, 0x00, 0x00, - 0x50, 0x47, 0x00, 0x00, 0x74, 0x7d, 0x2c, 0x32, - 0x02, 0x00, 0x00, 0x00, 0x50, 0x47, 0x00, 0x00, - 0x0e, 0x00, 0x76, 0x00, 0x60, 0x47, 0x00, 0x00, - 0xa4, 0x7c, 0x00, 0x00, 0xaa, 0x2a, 0x9f, 0x36, - 0x02, 0x00, 0x00, 0x00, 0xa4, 0x7c, 0x00, 0x00, - 0x08, 0x00, 0x76, 0x00, 0xb0, 0x7c, 0x00, 0x00, - 0xa6, 0x92, 0x00, 0x00, 0xe5, 0x79, 0x57, 0x99, - 0x02, 0x00, 0x00, 0x00, 0xa6, 0x92, 0x00, 0x00, - 0x13, 0x00, 0x76, 0x00, 0xc0, 0x92, 0x00, 0x00, - 0x3d, 0x9a, 0x00, 0x00, 0xc2, 0xaf, 0x89, 0x0b, - 0x06, 0x00, 0x00, 0x00, 0x3d, 0x9a, 0x00, 0x00, - 0x04, 0x00, 0x4c, 0x00, 0x44, 0x9a, 0x00, 0x00, - 0x48, 0x9a, 0x00, 0x00, 0x4b, 0xff, 0xd6, 0x9c, - 0x02, 0x00, 0x00, 0x00, 0x48, 0x9a, 0x00, 0x00, - 0x04, 0x00, 0x4c, 0x00, 0x4c, 0x9a, 0x00, 0x00, - 0x50, 0x9a, 0x00, 0x00, 0x94, 0x5d, 0xdc, 0x97, - 0x0a, 0x00, 0x00, 0x00, 0x50, 0x9a, 0x00, 0x00, - 0x07, 0x00, 0x4c, 0x00, 0x58, 0x9a, 0x00, 0x00, - 0x5c, 0x9a, 0x00, 0x00, 0x52, 0x48, 0x54, 0x4a, - 0x04, 0x00, 0x00, 0x00, 0x5c, 0x9a, 0x00, 0x00, - 0x0a, 0x00, 0x76, 0x00, 0x68, 0x9a, 0x00, 0x00, - 0xda, 0x9c, 0x00, 0x00, 0x5f, 0xb2, 0x55, 0x87, - 0x02, 0x00, 0x00, 0x00, 0xda, 0x9c, 0x00, 0x00, - 0x0d, 0x00, 0x76, 0x00, 0xe8, 0x9c, 0x00, 0x00, - 0x23, 0x9e, 0x00, 0x00, 0x77, 0x69, 0x6e, 0x64, + 0x00, 0x2b, 0x00, 0x00, 0x6f, 0xec, 0xff, 0x49, + 0x0b, 0x00, 0x00, 0x00, 0x00, 0x2b, 0x00, 0x00, + 0x0f, 0x00, 0x76, 0x00, 0x10, 0x2b, 0x00, 0x00, + 0x0c, 0x3d, 0x00, 0x00, 0xd6, 0x8d, 0x7d, 0x1f, + 0x05, 0x00, 0x00, 0x00, 0x0c, 0x3d, 0x00, 0x00, + 0x0a, 0x00, 0x4c, 0x00, 0x18, 0x3d, 0x00, 0x00, + 0x38, 0x3d, 0x00, 0x00, 0xd8, 0x50, 0x33, 0x5a, + 0x02, 0x00, 0x00, 0x00, 0x38, 0x3d, 0x00, 0x00, + 0x0e, 0x00, 0x76, 0x00, 0x48, 0x3d, 0x00, 0x00, + 0x00, 0x4c, 0x00, 0x00, 0x41, 0xfb, 0x0d, 0x32, + 0x02, 0x00, 0x00, 0x00, 0x00, 0x4c, 0x00, 0x00, + 0x06, 0x00, 0x4c, 0x00, 0x08, 0x4c, 0x00, 0x00, + 0x0c, 0x4c, 0x00, 0x00, 0x35, 0xc7, 0x82, 0x66, + 0x0c, 0x00, 0x00, 0x00, 0x0c, 0x4c, 0x00, 0x00, + 0x08, 0x00, 0x4c, 0x00, 0x14, 0x4c, 0x00, 0x00, + 0x18, 0x4c, 0x00, 0x00, 0xd4, 0xb5, 0x02, 0x00, + 0xff, 0xff, 0xff, 0xff, 0x18, 0x4c, 0x00, 0x00, + 0x01, 0x00, 0x4c, 0x00, 0x1c, 0x4c, 0x00, 0x00, + 0x20, 0x4c, 0x00, 0x00, 0x74, 0x7d, 0x2c, 0x32, + 0x02, 0x00, 0x00, 0x00, 0x20, 0x4c, 0x00, 0x00, + 0x0e, 0x00, 0x76, 0x00, 0x30, 0x4c, 0x00, 0x00, + 0x74, 0x81, 0x00, 0x00, 0xaa, 0x2a, 0x9f, 0x36, + 0x02, 0x00, 0x00, 0x00, 0x74, 0x81, 0x00, 0x00, + 0x08, 0x00, 0x76, 0x00, 0x80, 0x81, 0x00, 0x00, + 0x76, 0x97, 0x00, 0x00, 0xe5, 0x79, 0x57, 0x99, + 0x02, 0x00, 0x00, 0x00, 0x76, 0x97, 0x00, 0x00, + 0x13, 0x00, 0x76, 0x00, 0x90, 0x97, 0x00, 0x00, + 0x22, 0xa1, 0x00, 0x00, 0xc2, 0xaf, 0x89, 0x0b, + 0x06, 0x00, 0x00, 0x00, 0x22, 0xa1, 0x00, 0x00, + 0x04, 0x00, 0x4c, 0x00, 0x28, 0xa1, 0x00, 0x00, + 0x2c, 0xa1, 0x00, 0x00, 0x4b, 0xff, 0xd6, 0x9c, + 0x02, 0x00, 0x00, 0x00, 0x2c, 0xa1, 0x00, 0x00, + 0x04, 0x00, 0x4c, 0x00, 0x30, 0xa1, 0x00, 0x00, + 0x34, 0xa1, 0x00, 0x00, 0x94, 0x5d, 0xdc, 0x97, + 0x0a, 0x00, 0x00, 0x00, 0x34, 0xa1, 0x00, 0x00, + 0x07, 0x00, 0x4c, 0x00, 0x3c, 0xa1, 0x00, 0x00, + 0x40, 0xa1, 0x00, 0x00, 0x52, 0x48, 0x54, 0x4a, + 0x04, 0x00, 0x00, 0x00, 0x40, 0xa1, 0x00, 0x00, + 0x0a, 0x00, 0x76, 0x00, 0x50, 0xa1, 0x00, 0x00, + 0xc2, 0xa3, 0x00, 0x00, 0x5f, 0xb2, 0x55, 0x87, + 0x02, 0x00, 0x00, 0x00, 0xc2, 0xa3, 0x00, 0x00, + 0x0d, 0x00, 0x76, 0x00, 0xd0, 0xa3, 0x00, 0x00, + 0x0b, 0xa5, 0x00, 0x00, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x2e, 0x75, 0x69, 0x00, 0x00, 0x00, - 0x80, 0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x20, 0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x3f, 0x78, 0x6d, 0x6c, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x31, 0x2e, 0x30, 0x22, 0x20, 0x65, 0x6e, 0x63, 0x6f, @@ -74,7 +74,7 @@ 0x21, 0x2d, 0x2d, 0x20, 0x47, 0x65, 0x6e, 0x65, 0x72, 0x61, 0x74, 0x65, 0x64, 0x20, 0x77, 0x69, 0x74, 0x68, 0x20, 0x67, 0x6c, 0x61, 0x64, 0x65, - 0x20, 0x33, 0x2e, 0x31, 0x38, 0x2e, 0x33, 0x20, + 0x20, 0x33, 0x2e, 0x32, 0x30, 0x2e, 0x30, 0x20, 0x2d, 0x2d, 0x3e, 0x0a, 0x3c, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x3c, 0x72, 0x65, 0x71, 0x75, 0x69, 0x72, 0x65, 0x73, @@ -128,7 +128,60 @@ 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, - 0x70, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x2e, 0x35, + 0x70, 0x65, 0x72, 0x22, 0x3e, 0x32, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, + 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, + 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, + 0x6e, 0x74, 0x22, 0x3e, 0x30, 0x2e, 0x31, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, + 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, + 0x22, 0x3e, 0x30, 0x2e, 0x31, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x31, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, + 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, + 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, + 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, + 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, + 0x64, 0x3d, 0x22, 0x74, 0x69, 0x6d, 0x65, 0x5f, + 0x61, 0x64, 0x6a, 0x22, 0x3e, 0x3c, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, + 0x65, 0x72, 0x22, 0x3e, 0x31, 0x30, 0x30, 0x30, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, 0x5f, + 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, + 0x74, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, + 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, + 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, + 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, + 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x6f, 0x62, + 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, + 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, + 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, + 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x76, + 0x6f, 0x6c, 0x5f, 0x61, 0x64, 0x6a, 0x22, 0x3e, + 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, + 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, @@ -151,92 +204,92 @@ 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, - 0x63, 0x74, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, - 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, - 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, - 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, - 0x20, 0x69, 0x64, 0x3d, 0x22, 0x74, 0x69, 0x6d, - 0x65, 0x5f, 0x61, 0x64, 0x6a, 0x22, 0x3e, 0x3c, + 0x63, 0x74, 0x3e, 0x3c, 0x74, 0x65, 0x6d, 0x70, + 0x6c, 0x61, 0x74, 0x65, 0x20, 0x63, 0x6c, 0x61, + 0x73, 0x73, 0x3d, 0x22, 0x50, 0x74, 0x57, 0x69, + 0x6e, 0x64, 0x6f, 0x77, 0x22, 0x20, 0x70, 0x61, + 0x72, 0x65, 0x6e, 0x74, 0x3d, 0x22, 0x47, 0x74, + 0x6b, 0x41, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, + 0x74, 0x69, 0x6f, 0x6e, 0x57, 0x69, 0x6e, 0x64, + 0x6f, 0x77, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, + 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, + 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, - 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x30, - 0x30, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, + 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, + 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, + 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, + 0x3e, 0x50, 0x61, 0x72, 0x6c, 0x61, 0x74, 0x79, + 0x70, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, - 0x70, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, - 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, - 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, - 0x3e, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, - 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, - 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, - 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, - 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, - 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, - 0x22, 0x76, 0x6f, 0x6c, 0x5f, 0x61, 0x64, 0x6a, - 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, - 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x77, 0x69, 0x6e, + 0x64, 0x6f, 0x77, 0x5f, 0x70, 0x6f, 0x73, 0x69, + 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x63, 0x65, + 0x6e, 0x74, 0x65, 0x72, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, + 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, + 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, + 0x47, 0x72, 0x69, 0x64, 0x22, 0x20, 0x69, 0x64, + 0x3d, 0x22, 0x6d, 0x61, 0x69, 0x6e, 0x5f, 0x67, + 0x72, 0x69, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, + 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, + 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, - 0x75, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, + 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, + 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x73, 0x74, 0x65, 0x70, 0x5f, 0x69, 0x6e, 0x63, - 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, - 0x30, 0x2e, 0x31, 0x30, 0x30, 0x30, 0x30, 0x30, - 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, - 0x30, 0x30, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, - 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, - 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x30, 0x2e, - 0x31, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, - 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, - 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, - 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x74, 0x65, - 0x6d, 0x70, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x63, - 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x50, 0x74, - 0x57, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x22, 0x20, - 0x70, 0x61, 0x72, 0x65, 0x6e, 0x74, 0x3d, 0x22, - 0x47, 0x74, 0x6b, 0x41, 0x70, 0x70, 0x6c, 0x69, - 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x57, 0x69, - 0x6e, 0x64, 0x6f, 0x77, 0x22, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, - 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, - 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, - 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, - 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, - 0x73, 0x22, 0x3e, 0x50, 0x61, 0x72, 0x6c, 0x61, - 0x74, 0x79, 0x70, 0x65, 0x3c, 0x2f, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x77, - 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x5f, 0x70, 0x6f, - 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, - 0x63, 0x65, 0x6e, 0x74, 0x65, 0x72, 0x3c, 0x2f, + 0x72, 0x6f, 0x77, 0x5f, 0x73, 0x70, 0x61, 0x63, + 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, - 0x74, 0x6b, 0x47, 0x72, 0x69, 0x64, 0x22, 0x20, - 0x69, 0x64, 0x3d, 0x22, 0x6d, 0x61, 0x69, 0x6e, - 0x5f, 0x67, 0x72, 0x69, 0x64, 0x22, 0x3e, 0x3c, + 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, + 0x64, 0x3d, 0x22, 0x62, 0x6f, 0x78, 0x31, 0x22, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, + 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, + 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, + 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x6f, 0x72, 0x64, + 0x65, 0x72, 0x5f, 0x77, 0x69, 0x64, 0x74, 0x68, + 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6f, 0x72, + 0x69, 0x65, 0x6e, 0x74, 0x61, 0x74, 0x69, 0x6f, + 0x6e, 0x22, 0x3e, 0x76, 0x65, 0x72, 0x74, 0x69, + 0x63, 0x61, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x70, + 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, + 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, + 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, + 0x22, 0x50, 0x74, 0x57, 0x61, 0x76, 0x65, 0x76, + 0x69, 0x65, 0x77, 0x65, 0x72, 0x22, 0x20, 0x69, + 0x64, 0x3d, 0x22, 0x77, 0x61, 0x76, 0x65, 0x76, + 0x69, 0x65, 0x77, 0x65, 0x72, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, @@ -245,170 +298,311 @@ 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, - 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, - 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x72, 0x6f, 0x77, 0x5f, 0x73, 0x70, - 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, - 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, - 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, - 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, - 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x6f, 0x78, - 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, - 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, - 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, - 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x6f, - 0x72, 0x64, 0x65, 0x72, 0x5f, 0x77, 0x69, 0x64, - 0x74, 0x68, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x6f, 0x72, 0x69, 0x65, 0x6e, 0x74, 0x61, 0x74, - 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x76, 0x65, 0x72, - 0x74, 0x69, 0x63, 0x61, 0x6c, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, - 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, - 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, - 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, - 0x73, 0x3d, 0x22, 0x50, 0x74, 0x57, 0x61, 0x76, - 0x65, 0x76, 0x69, 0x65, 0x77, 0x65, 0x72, 0x22, - 0x20, 0x69, 0x64, 0x3d, 0x22, 0x77, 0x61, 0x76, - 0x65, 0x76, 0x69, 0x65, 0x77, 0x65, 0x72, 0x22, + 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, + 0x22, 0x68, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, - 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x68, 0x65, 0x78, 0x70, 0x61, - 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x76, 0x65, 0x78, 0x70, 0x61, - 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, - 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x2d, - 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, - 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, - 0x3d, 0x22, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, + 0x22, 0x76, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, + 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, + 0x75, 0x72, 0x73, 0x6f, 0x72, 0x2d, 0x63, 0x68, + 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, 0x68, + 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, + 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x5f, 0x63, + 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, 0x63, + 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, + 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, + 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, + 0x6c, 0x61, 0x79, 0x2d, 0x74, 0x6f, 0x67, 0x67, + 0x6c, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, + 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x70, 0x6c, + 0x61, 0x79, 0x5f, 0x74, 0x6f, 0x67, 0x67, 0x6c, + 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, + 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, + 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, + 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x73, 0x65, 0x6c, 0x65, 0x63, + 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x63, 0x68, 0x61, + 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, + 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x73, + 0x65, 0x6c, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x70, 0x6c, 0x61, 0x79, 0x2d, 0x74, 0x6f, - 0x67, 0x67, 0x6c, 0x65, 0x64, 0x22, 0x20, 0x68, - 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, - 0x70, 0x6c, 0x61, 0x79, 0x5f, 0x74, 0x6f, 0x67, - 0x67, 0x6c, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, - 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, - 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, - 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x65, 0x6c, - 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x63, - 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, - 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, - 0x22, 0x73, 0x65, 0x6c, 0x65, 0x63, 0x74, 0x69, - 0x6f, 0x6e, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, - 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, + 0x22, 0x7a, 0x6f, 0x6f, 0x6d, 0x2d, 0x69, 0x6e, + 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, + 0x72, 0x3d, 0x22, 0x7a, 0x6f, 0x6f, 0x6d, 0x5f, + 0x69, 0x6e, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, - 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x6f, - 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, + 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, + 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x7a, 0x6f, 0x6f, 0x6d, 0x2d, + 0x6f, 0x75, 0x74, 0x22, 0x20, 0x68, 0x61, 0x6e, + 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x7a, 0x6f, + 0x6f, 0x6d, 0x5f, 0x6f, 0x75, 0x74, 0x5f, 0x63, + 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, + 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, + 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, + 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, + 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, + 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, + 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, + 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, + 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, + 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, + 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, + 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, + 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, + 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, + 0x22, 0x62, 0x6f, 0x78, 0x33, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, - 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, - 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, - 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, - 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, + 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, + 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, - 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, - 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, - 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, - 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, - 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, - 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x6f, 0x78, - 0x33, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, - 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, + 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, + 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, + 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, + 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, + 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, + 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, + 0x22, 0x62, 0x6f, 0x78, 0x34, 0x22, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, + 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, + 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, + 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, + 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, + 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, + 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, + 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, + 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, + 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x6a, 0x75, + 0x6d, 0x70, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x22, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, + 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, 0x69, + 0x76, 0x65, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, + 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, + 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, + 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, + 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, + 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, + 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, + 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x73, + 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x6c, 0x69, + 0x63, 0x6b, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, + 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x6a, + 0x75, 0x6d, 0x70, 0x5f, 0x62, 0x61, 0x63, 0x6b, + 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, + 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x65, 0x64, 0x5f, + 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, + 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, + 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, + 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, + 0x64, 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, + 0x6e, 0x2d, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, + 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, + 0x65, 0x72, 0x3d, 0x22, 0x6a, 0x75, 0x6d, 0x70, + 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x5f, 0x64, 0x69, + 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x5f, + 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, + 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, + 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, + 0x2f, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, + 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, + 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, + 0x47, 0x74, 0x6b, 0x49, 0x6d, 0x61, 0x67, 0x65, + 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x69, 0x63, + 0x6f, 0x6e, 0x5f, 0x73, 0x65, 0x65, 0x6b, 0x5f, + 0x62, 0x61, 0x63, 0x6b, 0x31, 0x22, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, + 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, + 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, + 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, + 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x6e, + 0x61, 0x6d, 0x65, 0x22, 0x3e, 0x6d, 0x65, 0x64, + 0x69, 0x61, 0x2d, 0x73, 0x6b, 0x69, 0x70, 0x2d, + 0x62, 0x61, 0x63, 0x6b, 0x77, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, - 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, + 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, + 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, + 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, + 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x70, - 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, - 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, - 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, - 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, - 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x6f, 0x78, - 0x34, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, - 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, + 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, + 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, + 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, + 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, + 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, + 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, + 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, + 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, + 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, + 0x66, 0x61, 0x73, 0x74, 0x5f, 0x62, 0x61, 0x63, + 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, - 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, + 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, + 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, + 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, + 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, + 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, + 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x73, 0x74, + 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, + 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, + 0x6f, 0x6e, 0x2d, 0x70, 0x72, 0x65, 0x73, 0x73, + 0x2d, 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, + 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, + 0x22, 0x66, 0x61, 0x73, 0x74, 0x5f, 0x62, 0x61, + 0x63, 0x6b, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, + 0x6e, 0x5f, 0x70, 0x72, 0x65, 0x73, 0x73, 0x65, + 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, + 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, + 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, + 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, + 0x2d, 0x72, 0x65, 0x6c, 0x65, 0x61, 0x73, 0x65, + 0x2d, 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, + 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, + 0x22, 0x66, 0x61, 0x73, 0x74, 0x5f, 0x62, 0x61, + 0x63, 0x6b, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, + 0x6e, 0x5f, 0x72, 0x65, 0x6c, 0x65, 0x61, 0x73, + 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, + 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, + 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, + 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, 0x6d, + 0x61, 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, + 0x22, 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x73, 0x65, + 0x65, 0x6b, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x22, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, + 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, + 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, + 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, + 0x5f, 0x6e, 0x61, 0x6d, 0x65, 0x22, 0x3e, 0x6d, + 0x65, 0x64, 0x69, 0x61, 0x2d, 0x73, 0x65, 0x65, + 0x6b, 0x2d, 0x62, 0x61, 0x63, 0x6b, 0x77, 0x61, + 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, + 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, + 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, + 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, + 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, + 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, + 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, + 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, + 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, + 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, + 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, + 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, + 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, - 0x6e, 0x5f, 0x6a, 0x75, 0x6d, 0x70, 0x5f, 0x62, - 0x61, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, - 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, - 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x65, 0x6e, - 0x73, 0x69, 0x74, 0x69, 0x76, 0x65, 0x22, 0x3e, - 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x6e, 0x5f, 0x66, 0x61, 0x73, 0x74, 0x5f, 0x66, + 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, @@ -427,36 +621,50 @@ 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x65, 0x64, - 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, - 0x72, 0x3d, 0x22, 0x6a, 0x75, 0x6d, 0x70, 0x5f, - 0x62, 0x61, 0x63, 0x6b, 0x5f, 0x62, 0x75, 0x74, - 0x74, 0x6f, 0x6e, 0x5f, 0x63, 0x6c, 0x69, 0x63, - 0x6b, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, - 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, - 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x63, - 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, - 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, - 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, - 0x6d, 0x61, 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, - 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x73, - 0x65, 0x65, 0x6b, 0x5f, 0x62, 0x61, 0x63, 0x6b, - 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, - 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, - 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, - 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, - 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x67, 0x74, 0x6b, - 0x2d, 0x6d, 0x65, 0x64, 0x69, 0x61, 0x2d, 0x70, - 0x72, 0x65, 0x76, 0x69, 0x6f, 0x75, 0x73, 0x3c, + 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x2d, + 0x70, 0x72, 0x65, 0x73, 0x73, 0x2d, 0x65, 0x76, + 0x65, 0x6e, 0x74, 0x22, 0x20, 0x68, 0x61, 0x6e, + 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x66, 0x61, + 0x73, 0x74, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, + 0x72, 0x64, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, + 0x6e, 0x5f, 0x70, 0x72, 0x65, 0x73, 0x73, 0x65, + 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, + 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, + 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, + 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, + 0x2d, 0x72, 0x65, 0x6c, 0x65, 0x61, 0x73, 0x65, + 0x2d, 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, + 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, + 0x22, 0x66, 0x61, 0x73, 0x74, 0x5f, 0x66, 0x6f, + 0x72, 0x77, 0x61, 0x72, 0x64, 0x5f, 0x62, 0x75, + 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x72, 0x65, 0x6c, + 0x65, 0x61, 0x73, 0x65, 0x64, 0x5f, 0x63, 0x62, + 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, + 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, + 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, + 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, + 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, + 0x6b, 0x49, 0x6d, 0x61, 0x67, 0x65, 0x22, 0x20, + 0x69, 0x64, 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, + 0x5f, 0x73, 0x65, 0x65, 0x6b, 0x5f, 0x66, 0x6f, + 0x72, 0x77, 0x61, 0x72, 0x64, 0x22, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, + 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, + 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, + 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, + 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x6e, + 0x61, 0x6d, 0x65, 0x22, 0x3e, 0x6d, 0x65, 0x64, + 0x69, 0x61, 0x2d, 0x73, 0x65, 0x65, 0x6b, 0x2d, + 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, @@ -475,7 +683,7 @@ 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, - 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, + 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x33, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, @@ -484,236 +692,79 @@ 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, - 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x66, - 0x61, 0x73, 0x74, 0x5f, 0x62, 0x61, 0x63, 0x6b, - 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, - 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, - 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, - 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, - 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, + 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x6a, + 0x75, 0x6d, 0x70, 0x5f, 0x66, 0x6f, 0x72, 0x77, + 0x61, 0x72, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, + 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, - 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x73, 0x74, 0x61, - 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, - 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, - 0x6e, 0x2d, 0x70, 0x72, 0x65, 0x73, 0x73, 0x2d, - 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x68, - 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, - 0x66, 0x61, 0x73, 0x74, 0x5f, 0x62, 0x61, 0x63, - 0x6b, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, - 0x5f, 0x70, 0x72, 0x65, 0x73, 0x73, 0x65, 0x64, - 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, - 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, - 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, - 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x2d, - 0x72, 0x65, 0x6c, 0x65, 0x61, 0x73, 0x65, 0x2d, - 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x68, - 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, - 0x66, 0x61, 0x73, 0x74, 0x5f, 0x62, 0x61, 0x63, - 0x6b, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, - 0x5f, 0x72, 0x65, 0x6c, 0x65, 0x61, 0x73, 0x65, - 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, - 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, - 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x63, 0x68, 0x69, - 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, - 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, - 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, 0x6d, 0x61, - 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, - 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x73, 0x65, 0x65, - 0x6b, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x22, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, - 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, - 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x73, 0x74, 0x6f, 0x63, 0x6b, - 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x6d, 0x65, - 0x64, 0x69, 0x61, 0x2d, 0x72, 0x65, 0x77, 0x69, - 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, - 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, - 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, - 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, - 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x65, 0x6e, + 0x73, 0x69, 0x74, 0x69, 0x76, 0x65, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, - 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, - 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, - 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, - 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, - 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, - 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, - 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, - 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, - 0x63, 0x61, 0x6c, 0x65, 0x22, 0x20, 0x69, 0x64, - 0x3d, 0x22, 0x73, 0x65, 0x65, 0x6b, 0x5f, 0x73, - 0x63, 0x61, 0x6c, 0x65, 0x22, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x77, 0x69, - 0x64, 0x74, 0x68, 0x5f, 0x72, 0x65, 0x71, 0x75, - 0x65, 0x73, 0x74, 0x22, 0x3e, 0x36, 0x30, 0x3c, + 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, + 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, - 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, - 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, - 0x67, 0x6e, 0x22, 0x3e, 0x73, 0x74, 0x61, 0x72, - 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x75, - 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, - 0x73, 0x65, 0x65, 0x6b, 0x5f, 0x61, 0x64, 0x6a, + 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, + 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, + 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x6c, 0x6f, 0x77, 0x65, 0x72, - 0x5f, 0x73, 0x74, 0x65, 0x70, 0x70, 0x65, 0x72, - 0x5f, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, 0x69, - 0x76, 0x69, 0x74, 0x79, 0x22, 0x3e, 0x6f, 0x66, - 0x66, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, - 0x72, 0x5f, 0x73, 0x74, 0x65, 0x70, 0x70, 0x65, - 0x72, 0x5f, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, - 0x69, 0x76, 0x69, 0x74, 0x79, 0x22, 0x3e, 0x6f, - 0x66, 0x66, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x72, 0x61, - 0x77, 0x5f, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, - 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x68, 0x61, 0x73, 0x5f, 0x6f, 0x72, 0x69, - 0x67, 0x69, 0x6e, 0x22, 0x3e, 0x46, 0x61, 0x6c, - 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, - 0x75, 0x65, 0x5f, 0x70, 0x6f, 0x73, 0x22, 0x3e, - 0x72, 0x69, 0x67, 0x68, 0x74, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, - 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, - 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, - 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, - 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, - 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, - 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, - 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, - 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, - 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, - 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, - 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, - 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, - 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, - 0x74, 0x6f, 0x6e, 0x5f, 0x66, 0x61, 0x73, 0x74, - 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, - 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, - 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, - 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, - 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, - 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, - 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, - 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x73, 0x74, 0x61, - 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, - 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, - 0x6e, 0x2d, 0x70, 0x72, 0x65, 0x73, 0x73, 0x2d, - 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x68, - 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, - 0x66, 0x61, 0x73, 0x74, 0x5f, 0x66, 0x6f, 0x72, - 0x77, 0x61, 0x72, 0x64, 0x5f, 0x62, 0x75, 0x74, - 0x74, 0x6f, 0x6e, 0x5f, 0x70, 0x72, 0x65, 0x73, - 0x73, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, - 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, - 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, - 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, - 0x6f, 0x6e, 0x2d, 0x72, 0x65, 0x6c, 0x65, 0x61, - 0x73, 0x65, 0x2d, 0x65, 0x76, 0x65, 0x6e, 0x74, + 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, + 0x6e, 0x22, 0x3e, 0x73, 0x74, 0x61, 0x72, 0x74, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, + 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, - 0x72, 0x3d, 0x22, 0x66, 0x61, 0x73, 0x74, 0x5f, + 0x72, 0x3d, 0x22, 0x6a, 0x75, 0x6d, 0x70, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x5f, - 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x72, - 0x65, 0x6c, 0x65, 0x61, 0x73, 0x65, 0x64, 0x5f, - 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, - 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, - 0x2f, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, - 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, - 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, - 0x47, 0x74, 0x6b, 0x49, 0x6d, 0x61, 0x67, 0x65, - 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x69, 0x63, - 0x6f, 0x6e, 0x5f, 0x73, 0x65, 0x65, 0x6b, 0x5f, - 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x22, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, - 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, - 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, + 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x63, + 0x6c, 0x69, 0x63, 0x6b, 0x65, 0x64, 0x5f, 0x63, + 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, + 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, + 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, + 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, + 0x2d, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, + 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, + 0x72, 0x3d, 0x22, 0x6a, 0x75, 0x6d, 0x70, 0x5f, + 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x5f, + 0x64, 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, + 0x6e, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, + 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, + 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, + 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x63, 0x68, 0x69, + 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, + 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, + 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, 0x6d, 0x61, + 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, + 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x73, 0x65, 0x65, + 0x6b, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, + 0x64, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, + 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x6f, 0x63, - 0x6b, 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x6d, - 0x65, 0x64, 0x69, 0x61, 0x2d, 0x66, 0x6f, 0x72, + 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, + 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, + 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x69, + 0x63, 0x6f, 0x6e, 0x5f, 0x6e, 0x61, 0x6d, 0x65, + 0x22, 0x3e, 0x6d, 0x65, 0x64, 0x69, 0x61, 0x2d, + 0x73, 0x6b, 0x69, 0x70, 0x2d, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, @@ -733,160 +784,66 @@ 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, - 0x22, 0x3e, 0x33, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x22, 0x3e, 0x34, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, - 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, - 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, - 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, - 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, - 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, - 0x74, 0x6f, 0x6e, 0x5f, 0x6a, 0x75, 0x6d, 0x70, - 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, - 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, - 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, - 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, - 0x69, 0x76, 0x65, 0x22, 0x3e, 0x46, 0x61, 0x6c, - 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, - 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, - 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, - 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, - 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, - 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x68, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, - 0x73, 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x6c, - 0x69, 0x63, 0x6b, 0x65, 0x64, 0x22, 0x20, 0x68, - 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, - 0x6a, 0x75, 0x6d, 0x70, 0x5f, 0x66, 0x6f, 0x72, - 0x77, 0x61, 0x72, 0x64, 0x5f, 0x62, 0x75, 0x74, - 0x74, 0x6f, 0x6e, 0x5f, 0x63, 0x6c, 0x69, 0x63, - 0x6b, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, - 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, - 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x63, - 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, - 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, - 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, - 0x6d, 0x61, 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, - 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x73, - 0x65, 0x65, 0x6b, 0x5f, 0x66, 0x6f, 0x72, 0x77, - 0x61, 0x72, 0x64, 0x31, 0x22, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, - 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, - 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, - 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, - 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, + 0x3c, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x3e, 0x3c, + 0x63, 0x6c, 0x61, 0x73, 0x73, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x69, 0x6e, 0x6b, + 0x65, 0x64, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x73, + 0x74, 0x79, 0x6c, 0x65, 0x3e, 0x3c, 0x2f, 0x6f, + 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, + 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x73, 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, - 0x67, 0x74, 0x6b, 0x2d, 0x6d, 0x65, 0x64, 0x69, - 0x61, 0x2d, 0x6e, 0x65, 0x78, 0x74, 0x3c, 0x2f, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, + 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, + 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, - 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, - 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, - 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, - 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, - 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, + 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, - 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, + 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, + 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, - 0x6f, 0x6e, 0x22, 0x3e, 0x34, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, - 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, - 0x64, 0x3e, 0x3c, 0x73, 0x74, 0x79, 0x6c, 0x65, - 0x3e, 0x3c, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x69, - 0x6e, 0x6b, 0x65, 0x64, 0x22, 0x2f, 0x3e, 0x3c, - 0x2f, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x3e, 0x3c, - 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, - 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, - 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, - 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, - 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, - 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, - 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, - 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, - 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, - 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, - 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, - 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, - 0x62, 0x6f, 0x78, 0x32, 0x22, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, - 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, - 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, - 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, - 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x68, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, - 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, + 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, + 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, + 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, + 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, + 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, + 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x6f, + 0x78, 0x32, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, + 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, + 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, + 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, + 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, - 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, + 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, + 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, - 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, - 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, - 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, - 0x54, 0x6f, 0x67, 0x67, 0x6c, 0x65, 0x42, 0x75, - 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, - 0x3d, 0x22, 0x67, 0x6f, 0x74, 0x6f, 0x5f, 0x62, - 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, - 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x74, 0x6f, - 0x67, 0x67, 0x6c, 0x65, 0x62, 0x75, 0x74, 0x74, - 0x6f, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, + 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, + 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, + 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x54, 0x6f, + 0x67, 0x67, 0x6c, 0x65, 0x42, 0x75, 0x74, 0x74, + 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, + 0x67, 0x6f, 0x74, 0x6f, 0x5f, 0x62, 0x75, 0x74, + 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6e, 0x61, 0x6d, 0x65, 0x22, 0x3e, 0x67, 0x6f, 0x74, 0x6f, 0x5f, @@ -924,168 +881,199 @@ 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x6c, 0x65, 0x66, 0x74, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, - 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, - 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, + 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x67, 0x67, + 0x6c, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, + 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x67, 0x6f, + 0x74, 0x6f, 0x5f, 0x74, 0x6f, 0x67, 0x67, 0x6c, + 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, + 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, + 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, + 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, 0x6d, + 0x61, 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, + 0x22, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x31, 0x22, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, + 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, + 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, + 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x73, 0x6f, + 0x75, 0x72, 0x63, 0x65, 0x22, 0x3e, 0x2f, 0x63, + 0x6f, 0x6d, 0x2f, 0x67, 0x69, 0x74, 0x68, 0x75, + 0x62, 0x2f, 0x67, 0x6b, 0x61, 0x72, 0x73, 0x61, + 0x79, 0x2f, 0x70, 0x61, 0x72, 0x6c, 0x61, 0x74, + 0x79, 0x70, 0x65, 0x2f, 0x69, 0x63, 0x6f, 0x6e, + 0x73, 0x2f, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, + 0x2e, 0x70, 0x6e, 0x67, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, + 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, + 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, + 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, + 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, + 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, - 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, - 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, - 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, - 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, - 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, - 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, - 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, - 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x45, - 0x76, 0x65, 0x6e, 0x74, 0x42, 0x6f, 0x78, 0x22, - 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, - 0x65, 0x6c, 0x5f, 0x62, 0x6f, 0x78, 0x22, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, - 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, - 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, - 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, - 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, - 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, - 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x70, - 0x6f, 0x73, 0x5f, 0x6c, 0x61, 0x62, 0x65, 0x6c, + 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, + 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, + 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, + 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, + 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, + 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, + 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, + 0x6b, 0x45, 0x76, 0x65, 0x6e, 0x74, 0x42, 0x6f, + 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, + 0x61, 0x62, 0x65, 0x6c, 0x5f, 0x62, 0x6f, 0x78, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x6e, 0x61, 0x6d, 0x65, 0x22, 0x3e, - 0x74, 0x69, 0x6d, 0x65, 0x5f, 0x6c, 0x61, 0x62, - 0x65, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, - 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, - 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, - 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, - 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, + 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, + 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, + 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, + 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, + 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, + 0x22, 0x70, 0x6f, 0x73, 0x5f, 0x6c, 0x61, 0x62, + 0x65, 0x6c, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x6e, 0x61, 0x6d, 0x65, + 0x22, 0x3e, 0x74, 0x69, 0x6d, 0x65, 0x5f, 0x6c, + 0x61, 0x62, 0x65, 0x6c, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, + 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, + 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, + 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, + 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, + 0x3e, 0x30, 0x30, 0x3a, 0x30, 0x30, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x73, 0x69, 0x6e, 0x67, 0x6c, 0x65, 0x5f, + 0x6c, 0x69, 0x6e, 0x65, 0x5f, 0x6d, 0x6f, 0x64, + 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x6c, 0x69, 0x6e, 0x65, 0x73, 0x22, + 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, + 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, + 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, + 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, + 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x30, - 0x30, 0x3a, 0x30, 0x30, 0x3c, 0x2f, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, - 0x69, 0x6e, 0x67, 0x6c, 0x65, 0x5f, 0x6c, 0x69, - 0x6e, 0x65, 0x5f, 0x6d, 0x6f, 0x64, 0x65, 0x22, - 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, + 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, + 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x6c, 0x69, 0x6e, 0x65, 0x73, 0x22, 0x3e, 0x31, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, - 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, - 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, - 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, - 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, - 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, - 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, - 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, + 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, + 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, + 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, - 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, + 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, + 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, + 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, + 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, + 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, - 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, - 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, - 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, - 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, - 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, + 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, + 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, + 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, - 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, + 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, - 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, - 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, - 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, - 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, - 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, - 0x22, 0x47, 0x74, 0x6b, 0x56, 0x6f, 0x6c, 0x75, - 0x6d, 0x65, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, - 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x76, 0x6f, - 0x6c, 0x75, 0x6d, 0x65, 0x62, 0x75, 0x74, 0x74, - 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, - 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, - 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, - 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, + 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, + 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, + 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, + 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x56, 0x6f, + 0x6c, 0x75, 0x6d, 0x65, 0x42, 0x75, 0x74, 0x74, + 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, + 0x76, 0x6f, 0x6c, 0x75, 0x6d, 0x65, 0x62, 0x75, + 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, + 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, - 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, - 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, - 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, + 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, + 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, + 0x66, 0x6f, 0x63, 0x75, 0x73, 0x5f, 0x6f, 0x6e, + 0x5f, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x22, 0x3e, + 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, + 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, + 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, + 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, - 0x61, 0x73, 0x5f, 0x74, 0x6f, 0x6f, 0x6c, 0x74, - 0x69, 0x70, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x68, 0x61, 0x73, 0x5f, 0x74, 0x6f, 0x6f, + 0x6c, 0x74, 0x69, 0x70, 0x22, 0x3e, 0x54, 0x72, + 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, + 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, - 0x6e, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x72, 0x65, 0x6c, 0x69, 0x65, 0x66, 0x22, - 0x3e, 0x6e, 0x6f, 0x6e, 0x65, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x75, 0x73, 0x65, 0x5f, 0x73, 0x74, 0x6f, 0x63, - 0x6b, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, - 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x5f, - 0x6f, 0x6e, 0x5f, 0x63, 0x6c, 0x69, 0x63, 0x6b, - 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, + 0x65, 0x3d, 0x22, 0x72, 0x65, 0x6c, 0x69, 0x65, + 0x66, 0x22, 0x3e, 0x6e, 0x6f, 0x6e, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, @@ -1397,7 +1385,7 @@ 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x68, 0x65, 0x6c, 0x70, 0x2d, 0x6f, 0x76, 0x65, 0x72, 0x6c, 0x61, 0x79, 0x2e, 0x75, 0x69, 0x00, - 0xe1, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xec, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x3f, 0x78, 0x6d, 0x6c, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x31, 0x2e, 0x30, 0x22, 0x20, 0x65, 0x6e, 0x63, 0x6f, @@ -1603,70 +1591,117 @@ 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, - 0x70, 0x6c, 0x75, 0x73, 0x3c, 0x2f, 0x70, 0x72, + 0x73, 0x70, 0x61, 0x63, 0x65, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, + 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, + 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, + 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, + 0x22, 0x3e, 0x50, 0x6c, 0x61, 0x79, 0x2f, 0x50, + 0x61, 0x75, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, + 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, + 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, + 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, + 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, + 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, + 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, + 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, + 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, + 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, + 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, + 0x74, 0x3b, 0x4c, 0x65, 0x66, 0x74, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x64, 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, + 0x6f, 0x6e, 0x22, 0x3e, 0x47, 0x54, 0x4b, 0x5f, + 0x54, 0x45, 0x58, 0x54, 0x5f, 0x44, 0x49, 0x52, + 0x5f, 0x4c, 0x54, 0x52, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, - 0x3e, 0x5a, 0x6f, 0x6f, 0x6d, 0x20, 0x69, 0x6e, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, - 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, - 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, - 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, - 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, - 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, - 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, - 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, + 0x3e, 0x4a, 0x75, 0x6d, 0x70, 0x20, 0x62, 0x61, + 0x63, 0x6b, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, + 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, + 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, + 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, + 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, + 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, + 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, + 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, + 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, + 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, + 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, + 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, + 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, + 0x52, 0x69, 0x67, 0x68, 0x74, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, - 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, - 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, - 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, - 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x6d, 0x69, - 0x6e, 0x75, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x64, 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, + 0x6e, 0x22, 0x3e, 0x47, 0x54, 0x4b, 0x5f, 0x54, + 0x45, 0x58, 0x54, 0x5f, 0x44, 0x49, 0x52, 0x5f, + 0x52, 0x54, 0x4c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, - 0x5a, 0x6f, 0x6f, 0x6d, 0x20, 0x6f, 0x75, 0x74, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, - 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, - 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, - 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, - 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, - 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, - 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, - 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, - 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x4a, 0x75, 0x6d, 0x70, 0x20, 0x62, 0x61, 0x63, + 0x6b, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, + 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, + 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, + 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, + 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, + 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, + 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, + 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, + 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, + 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x52, + 0x69, 0x67, 0x68, 0x74, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, + 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, + 0x22, 0x3e, 0x47, 0x54, 0x4b, 0x5f, 0x54, 0x45, + 0x58, 0x54, 0x5f, 0x44, 0x49, 0x52, 0x5f, 0x4c, + 0x54, 0x52, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, - 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, - 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, - 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x47, 0x3c, - 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, - 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, - 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, - 0x65, 0x73, 0x22, 0x3e, 0x4f, 0x70, 0x65, 0x6e, - 0x20, 0xe2, 0x80, 0x9c, 0x47, 0x6f, 0x20, 0x74, - 0x6f, 0xe2, 0x80, 0x9d, 0x20, 0x64, 0x69, 0x61, - 0x6c, 0x6f, 0x67, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, + 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, + 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, + 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4a, + 0x75, 0x6d, 0x70, 0x20, 0x66, 0x6f, 0x72, 0x77, + 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, @@ -1684,18 +1719,50 @@ 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, - 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, - 0x3b, 0x43, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, - 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, - 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, - 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x43, - 0x6f, 0x70, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, - 0x73, 0x74, 0x61, 0x6d, 0x70, 0x20, 0x74, 0x6f, - 0x20, 0x63, 0x6c, 0x69, 0x70, 0x62, 0x6f, 0x61, - 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, + 0x3b, 0x4c, 0x65, 0x66, 0x74, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, + 0x64, 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, + 0x6e, 0x22, 0x3e, 0x47, 0x54, 0x4b, 0x5f, 0x54, + 0x45, 0x58, 0x54, 0x5f, 0x44, 0x49, 0x52, 0x5f, + 0x52, 0x54, 0x4c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, + 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, + 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, + 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, + 0x4a, 0x75, 0x6d, 0x70, 0x20, 0x66, 0x6f, 0x72, + 0x77, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, + 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, + 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, + 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, + 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, + 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, + 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, + 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, + 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, + 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, + 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, + 0x74, 0x3b, 0x70, 0x6c, 0x75, 0x73, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, + 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, + 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, + 0x73, 0x22, 0x3e, 0x5a, 0x6f, 0x6f, 0x6d, 0x20, + 0x69, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, @@ -1714,39 +1781,18 @@ 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, - 0x56, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, - 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, - 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, - 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x47, 0x6f, - 0x20, 0x74, 0x6f, 0x20, 0x74, 0x69, 0x6d, 0x65, - 0x73, 0x74, 0x61, 0x6d, 0x70, 0x20, 0x69, 0x6e, - 0x20, 0x63, 0x6c, 0x69, 0x70, 0x62, 0x6f, 0x61, - 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, - 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, - 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, - 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, - 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, - 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, - 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, - 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, - 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, - 0x73, 0x47, 0x72, 0x6f, 0x75, 0x70, 0x22, 0x3e, + 0x6d, 0x69, 0x6e, 0x75, 0x73, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, - 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, - 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, - 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, - 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x48, - 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, + 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, + 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, + 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, + 0x22, 0x3e, 0x5a, 0x6f, 0x6f, 0x6d, 0x20, 0x6f, + 0x75, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, + 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, + 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, @@ -1760,15 +1806,47 @@ 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, - 0x6f, 0x72, 0x22, 0x3e, 0x46, 0x31, 0x3c, 0x2f, + 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, + 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, + 0x47, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, + 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, + 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, + 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4f, 0x70, + 0x65, 0x6e, 0x20, 0xe2, 0x80, 0x9c, 0x47, 0x6f, + 0x20, 0x74, 0x6f, 0xe2, 0x80, 0x9d, 0x20, 0x64, + 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, + 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, + 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, + 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, + 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, + 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, + 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, + 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, + 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, + 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, + 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, + 0x67, 0x74, 0x3b, 0x43, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, - 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, - 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, - 0x73, 0x22, 0x3e, 0x53, 0x68, 0x6f, 0x77, 0x20, - 0x68, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x70, 0x72, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, + 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, + 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, + 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, + 0x3e, 0x43, 0x6f, 0x70, 0x79, 0x20, 0x74, 0x69, + 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x20, + 0x74, 0x6f, 0x20, 0x63, 0x6c, 0x69, 0x70, 0x62, + 0x6f, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, @@ -1787,39 +1865,110 @@ 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, - 0x74, 0x3b, 0x46, 0x31, 0x20, 0x26, 0x6c, 0x74, - 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, - 0x3b, 0x71, 0x75, 0x65, 0x73, 0x74, 0x69, 0x6f, - 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, - 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, - 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, - 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x53, 0x68, - 0x6f, 0x77, 0x20, 0x6b, 0x65, 0x79, 0x62, 0x6f, - 0x61, 0x72, 0x64, 0x20, 0x73, 0x68, 0x6f, 0x72, - 0x74, 0x63, 0x75, 0x74, 0x73, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x74, 0x3b, 0x56, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, + 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, + 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, + 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, + 0x47, 0x6f, 0x20, 0x74, 0x6f, 0x20, 0x74, 0x69, + 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x20, + 0x69, 0x6e, 0x20, 0x63, 0x6c, 0x69, 0x70, 0x62, + 0x6f, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, + 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, + 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, + 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, + 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, + 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, + 0x75, 0x74, 0x73, 0x47, 0x72, 0x6f, 0x75, 0x70, + 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, + 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, + 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, + 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, + 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, + 0x3e, 0x48, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, + 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, + 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, + 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, + 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, + 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, + 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, + 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x46, 0x31, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, + 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, + 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, + 0x79, 0x65, 0x73, 0x22, 0x3e, 0x53, 0x68, 0x6f, + 0x77, 0x20, 0x68, 0x65, 0x6c, 0x70, 0x3c, 0x2f, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, - 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, - 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, - 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, - 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x69, 0x6e, - 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, - 0x0a, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, - 0x29, 0x70, 0x61, 0x72, 0x6c, 0x61, 0x74, 0x79, - 0x70, 0x65, 0x2f, 0x00, 0x03, 0x00, 0x00, 0x00, - 0x0b, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, - 0x08, 0x00, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x00, - 0x07, 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x67, 0x6f, 0x74, 0x6f, - 0x2d, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x2e, - 0x75, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x80, 0x0e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, + 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, + 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, + 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, + 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, + 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, + 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, + 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, + 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, + 0x26, 0x67, 0x74, 0x3b, 0x71, 0x75, 0x65, 0x73, + 0x74, 0x69, 0x6f, 0x6e, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, + 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, + 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, + 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, + 0x3e, 0x53, 0x68, 0x6f, 0x77, 0x20, 0x6b, 0x65, + 0x79, 0x62, 0x6f, 0x61, 0x72, 0x64, 0x20, 0x73, + 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, + 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, + 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, + 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, + 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, + 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, + 0x2f, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, + 0x63, 0x65, 0x3e, 0x0a, 0x00, 0x00, 0x28, 0x75, + 0x75, 0x61, 0x79, 0x29, 0x70, 0x61, 0x72, 0x6c, + 0x61, 0x74, 0x79, 0x70, 0x65, 0x2f, 0x00, 0x00, + 0x03, 0x00, 0x00, 0x00, 0x0b, 0x00, 0x00, 0x00, + 0x04, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x0e, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, + 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x67, 0x6f, 0x74, 0x6f, 0x2d, 0x64, 0x69, 0x61, + 0x6c, 0x6f, 0x67, 0x2e, 0x75, 0x69, 0x00, 0x00, + 0xa8, 0x0e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x3f, 0x78, 0x6d, 0x6c, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x31, 0x2e, 0x30, 0x22, 0x20, 0x65, 0x6e, 0x63, 0x6f, @@ -1945,91 +2094,96 @@ 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, - 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x63, 0x61, 0x6e, + 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, + 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, + 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x43, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, - 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, + 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, + 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, + 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, + 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, + 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, + 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, - 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, + 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, + 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, + 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, + 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, - 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, - 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x75, 0x73, 0x65, 0x5f, 0x73, 0x74, 0x6f, - 0x63, 0x6b, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, - 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, - 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, - 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, + 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, + 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, - 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, - 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, + 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, + 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, + 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, + 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, + 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, + 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, + 0x32, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, + 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, + 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, + 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x4f, 0x4b, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, + 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, - 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, - 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, - 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, - 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, - 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, - 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, - 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, - 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, - 0x74, 0x74, 0x6f, 0x6e, 0x32, 0x22, 0x3e, 0x3c, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, - 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x67, 0x74, - 0x6b, 0x2d, 0x6f, 0x6b, 0x3c, 0x2f, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, - 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, - 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, - 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, + 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x64, 0x65, 0x66, - 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, - 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x73, - 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, - 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, + 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, + 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x64, + 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, + 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, - 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, - 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, - 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, - 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, - 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x73, 0x74, - 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x54, 0x72, 0x75, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, + 0x61, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, + 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, + 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, + 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, @@ -4703,7 +4857,7 @@ 0x6e, 0x64, 0x6f, 0x77, 0x2d, 0x68, 0x65, 0x61, 0x64, 0x65, 0x72, 0x62, 0x61, 0x72, 0x2e, 0x75, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x6d, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x82, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x3f, 0x78, 0x6d, 0x6c, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x31, 0x2e, 0x30, 0x22, 0x20, 0x65, 0x6e, 0x63, 0x6f, @@ -4764,8 +4918,10 @@ 0x5f, 0x6f, 0x70, 0x65, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, - 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x67, 0x74, - 0x6b, 0x2d, 0x6f, 0x70, 0x65, 0x6e, 0x3c, 0x2f, + 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, + 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, + 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, + 0x3e, 0x5f, 0x4f, 0x70, 0x65, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, @@ -4805,149 +4961,214 @@ 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x73, - 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x54, 0x72, - 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, - 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, - 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, - 0x69, 0x6f, 0x6e, 0x5f, 0x6e, 0x61, 0x6d, 0x65, - 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x6f, 0x70, - 0x65, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x74, - 0x79, 0x6c, 0x65, 0x3e, 0x3c, 0x63, 0x6c, 0x61, - 0x73, 0x73, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x73, 0x75, 0x67, 0x67, 0x65, 0x73, 0x74, - 0x65, 0x64, 0x2d, 0x61, 0x63, 0x74, 0x69, 0x6f, - 0x6e, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x73, 0x74, - 0x79, 0x6c, 0x65, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, - 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, - 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, - 0x63, 0x6b, 0x2d, 0x74, 0x79, 0x70, 0x65, 0x22, - 0x3e, 0x73, 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, - 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, - 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, - 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, - 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, - 0x22, 0x47, 0x74, 0x6b, 0x54, 0x6f, 0x67, 0x67, - 0x6c, 0x65, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, - 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, - 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x70, 0x6c, 0x61, - 0x79, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, - 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x6d, 0x65, - 0x64, 0x69, 0x61, 0x2d, 0x70, 0x6c, 0x61, 0x79, + 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, + 0x6e, 0x5f, 0x6e, 0x61, 0x6d, 0x65, 0x22, 0x3e, + 0x61, 0x70, 0x70, 0x2e, 0x6f, 0x70, 0x65, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, - 0x6c, 0x65, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, + 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x74, 0x79, 0x6c, + 0x65, 0x3e, 0x3c, 0x63, 0x6c, 0x61, 0x73, 0x73, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, + 0x75, 0x67, 0x67, 0x65, 0x73, 0x74, 0x65, 0x64, + 0x2d, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, + 0x2f, 0x3e, 0x3c, 0x2f, 0x73, 0x74, 0x79, 0x6c, + 0x65, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, + 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, + 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x63, 0x6b, + 0x2d, 0x74, 0x79, 0x70, 0x65, 0x22, 0x3e, 0x73, + 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, + 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, + 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, + 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, + 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, + 0x74, 0x6b, 0x54, 0x6f, 0x67, 0x67, 0x6c, 0x65, + 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, + 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, + 0x6f, 0x6e, 0x5f, 0x70, 0x6c, 0x61, 0x79, 0x22, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, + 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, + 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, + 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, + 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x73, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, - 0x73, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, - 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, - 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, - 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, - 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, - 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, - 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, - 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, + 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, + 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, - 0x73, 0x65, 0x5f, 0x73, 0x74, 0x6f, 0x63, 0x6b, - 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, + 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, + 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, + 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, + 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, + 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x69, + 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x61, 0x6c, 0x5f, + 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x62, + 0x6f, 0x78, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, + 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, + 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, + 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, + 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, + 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, + 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, + 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6f, + 0x72, 0x69, 0x65, 0x6e, 0x74, 0x61, 0x74, 0x69, + 0x6f, 0x6e, 0x22, 0x3e, 0x68, 0x6f, 0x72, 0x69, + 0x7a, 0x6f, 0x6e, 0x74, 0x61, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x61, 0x6c, 0x77, 0x61, 0x79, 0x73, 0x5f, - 0x73, 0x68, 0x6f, 0x77, 0x5f, 0x69, 0x6d, 0x61, - 0x67, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, + 0x22, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, + 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, + 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, + 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, + 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, + 0x6d, 0x61, 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, + 0x3d, 0x22, 0x70, 0x6c, 0x61, 0x79, 0x5f, 0x69, + 0x63, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, + 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, + 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, + 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, + 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, + 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, + 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, + 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x6e, 0x61, 0x6d, + 0x65, 0x22, 0x3e, 0x6d, 0x65, 0x64, 0x69, 0x61, + 0x2d, 0x70, 0x6c, 0x61, 0x79, 0x62, 0x61, 0x63, + 0x6b, 0x2d, 0x73, 0x74, 0x61, 0x72, 0x74, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, + 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, + 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, + 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, + 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, + 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, + 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x70, + 0x6c, 0x61, 0x79, 0x5f, 0x6c, 0x61, 0x62, 0x65, + 0x6c, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, + 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, - 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, - 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, - 0x22, 0x74, 0x6f, 0x67, 0x67, 0x6c, 0x65, 0x64, - 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, - 0x72, 0x3d, 0x22, 0x70, 0x6c, 0x61, 0x79, 0x5f, - 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x74, - 0x6f, 0x67, 0x67, 0x6c, 0x65, 0x64, 0x5f, 0x63, - 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, - 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, - 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, - 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, - 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, - 0x65, 0x3d, 0x22, 0x70, 0x61, 0x63, 0x6b, 0x2d, - 0x74, 0x79, 0x70, 0x65, 0x22, 0x3e, 0x73, 0x74, - 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, - 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, - 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, - 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, - 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, - 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, - 0x6b, 0x4d, 0x65, 0x6e, 0x75, 0x42, 0x75, 0x74, - 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, - 0x22, 0x6d, 0x65, 0x6e, 0x75, 0x5f, 0x62, 0x75, - 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, - 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, - 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, - 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, + 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, + 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, - 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x65, - 0x6e, 0x73, 0x69, 0x74, 0x69, 0x76, 0x65, 0x22, - 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, + 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, + 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, + 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, + 0x5f, 0x50, 0x6c, 0x61, 0x79, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, - 0x64, 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, - 0x6e, 0x22, 0x3e, 0x6e, 0x6f, 0x6e, 0x65, 0x3c, - 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, - 0x79, 0x3e, 0x3c, 0x21, 0x2d, 0x2d, 0x3c, 0x61, - 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, - 0x6f, 0x72, 0x20, 0x6b, 0x65, 0x79, 0x3d, 0x22, - 0x46, 0x31, 0x30, 0x22, 0x20, 0x73, 0x69, 0x67, - 0x6e, 0x61, 0x6c, 0x3d, 0x22, 0x63, 0x6c, 0x69, - 0x63, 0x6b, 0x65, 0x64, 0x22, 0x2f, 0x3e, 0x2d, - 0x2d, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, - 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, - 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, - 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, - 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x63, 0x6b, - 0x2d, 0x74, 0x79, 0x70, 0x65, 0x22, 0x3e, 0x65, - 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, - 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, - 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, + 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, + 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, + 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, + 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, + 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, - 0x3c, 0x2f, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, - 0x61, 0x63, 0x65, 0x3e, 0x0a, 0x00, 0x00, 0x28, - 0x75, 0x75, 0x61, 0x79, 0x29, 0x63, 0x6f, 0x6d, - 0x2f, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, - 0x67, 0x74, 0x6b, 0x2f, 0x01, 0x00, 0x00, 0x00, - 0x67, 0x69, 0x74, 0x68, 0x75, 0x62, 0x2f, 0x00, - 0x05, 0x00, 0x00, 0x00, 0x63, 0x75, 0x72, 0x73, - 0x6f, 0x72, 0x2e, 0x70, 0x6e, 0x67, 0x00, 0x00, + 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, + 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, + 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, + 0x67, 0x67, 0x6c, 0x65, 0x64, 0x22, 0x20, 0x68, + 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, + 0x70, 0x6c, 0x61, 0x79, 0x5f, 0x62, 0x75, 0x74, + 0x74, 0x6f, 0x6e, 0x5f, 0x74, 0x6f, 0x67, 0x67, + 0x6c, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, + 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, + 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, + 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, + 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, + 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, + 0x70, 0x61, 0x63, 0x6b, 0x2d, 0x74, 0x79, 0x70, + 0x65, 0x22, 0x3e, 0x73, 0x74, 0x61, 0x72, 0x74, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, + 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, + 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, + 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, + 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4d, 0x65, + 0x6e, 0x75, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, + 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6d, 0x65, + 0x6e, 0x75, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, + 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, + 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, + 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, + 0x65, 0x3d, 0x22, 0x73, 0x65, 0x6e, 0x73, 0x69, + 0x74, 0x69, 0x76, 0x65, 0x22, 0x3e, 0x54, 0x72, + 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, + 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, + 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x69, 0x72, + 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, + 0x6e, 0x6f, 0x6e, 0x65, 0x3c, 0x2f, 0x70, 0x72, + 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, + 0x21, 0x2d, 0x2d, 0x3c, 0x61, 0x63, 0x63, 0x65, + 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x20, + 0x6b, 0x65, 0x79, 0x3d, 0x22, 0x46, 0x31, 0x30, + 0x22, 0x20, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, + 0x3d, 0x22, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x65, + 0x64, 0x22, 0x2f, 0x3e, 0x2d, 0x2d, 0x3e, 0x3c, + 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, + 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, + 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, + 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, + 0x22, 0x70, 0x61, 0x63, 0x6b, 0x2d, 0x74, 0x79, + 0x70, 0x65, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, + 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, + 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, + 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, + 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, + 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x69, + 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, + 0x3e, 0x0a, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, + 0x79, 0x29, 0x63, 0x6f, 0x6d, 0x2f, 0x00, 0x00, + 0x0c, 0x00, 0x00, 0x00, 0x67, 0x74, 0x6b, 0x2f, + 0x01, 0x00, 0x00, 0x00, 0x67, 0x69, 0x74, 0x68, + 0x75, 0x62, 0x2f, 0x00, 0x05, 0x00, 0x00, 0x00, + 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x2e, 0x70, + 0x6e, 0x67, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x62, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x89, 0x50, 0x4e, 0x47, 0x0d, 0x0a, 0x1a, 0x0a, 0x00, 0x00, 0x00, 0x0d, 0x49, 0x48, 0x44, 0x52, @@ -5094,6 +5315,8 @@ */ +#ifndef __GTK_DOC_IGNORE__ + #if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7) #define G_HAS_CONSTRUCTORS 1 @@ -5106,17 +5329,43 @@ #define G_HAS_CONSTRUCTORS 1 -#define G_DEFINE_CONSTRUCTOR(_func) \ +/* We do some weird things to avoid the constructors being optimized + * away on VS2015 if WholeProgramOptimization is enabled. First we + * make a reference to the array from the wrapper to make sure its + * references. Then we use a pragma to make sure the wrapper function + * symbol is always included at the link stage. Also, the symbols + * need to be extern (but not dllexport), even though they are not + * really used from another object file. + */ + +/* We need to account for differences between the mangling of symbols + * for Win32 (x86) and x64 programs, as symbols on Win32 are prefixed + * with an underscore but symbols on x64 are not. + */ +#ifdef _WIN64 +#define G_MSVC_SYMBOL_PREFIX "" +#else +#define G_MSVC_SYMBOL_PREFIX "_" +#endif + +#define G_DEFINE_CONSTRUCTOR(_func) G_MSVC_CTOR (_func, G_MSVC_SYMBOL_PREFIX) +#define G_DEFINE_DESTRUCTOR(_func) G_MSVC_DTOR (_func, G_MSVC_SYMBOL_PREFIX) + +#define G_MSVC_CTOR(_func,_sym_prefix) \ static void _func(void); \ - static int _func ## _wrapper(void) { _func(); return 0; } \ + extern int (* _array ## _func)(void); \ + int _func ## _wrapper(void) { _func(); g_slist_find (NULL, _array ## _func); return 0; } \ + __pragma(comment(linker,"/include:" _sym_prefix # _func "_wrapper")) \ __pragma(section(".CRT$XCU",read)) \ - __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _wrapper; + __declspec(allocate(".CRT$XCU")) int (* _array ## _func)(void) = _func ## _wrapper; -#define G_DEFINE_DESTRUCTOR(_func) \ +#define G_MSVC_DTOR(_func,_sym_prefix) \ static void _func(void); \ - static int _func ## _constructor(void) { atexit (_func); return 0; } \ + extern int (* _array ## _func)(void); \ + int _func ## _constructor(void) { atexit (_func); g_slist_find (NULL, _array ## _func); return 0; } \ + __pragma(comment(linker,"/include:" _sym_prefix # _func "_constructor")) \ __pragma(section(".CRT$XCU",read)) \ - __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _constructor; + __declspec(allocate(".CRT$XCU")) int (* _array ## _func)(void) = _func ## _constructor; #elif defined (_MSC_VER) @@ -5167,6 +5416,7 @@ #endif +#endif /* __GTK_DOC_IGNORE__ */ #ifdef G_HAS_CONSTRUCTORS diff -Nru parlatype-1.5.4/src/pt-window.c parlatype-1.5.6/src/pt-window.c --- parlatype-1.5.4/src/pt-window.c 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/src/pt-window.c 2018-06-17 20:35:03.000000000 +0000 @@ -18,10 +18,12 @@ #include "config.h" #include #include +#ifdef GDK_WINDOWING_X11 #include -#include -#include -#include +#endif +#include +#include +#include #include "pt-app.h" #include "pt-dbus-service.h" #include "pt-goto-dialog.h" @@ -243,6 +245,26 @@ !gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (win->priv->button_play))); } +void +zoom_in_cb (GtkWidget *widget, + PtWindow *win) +{ + GAction *action; + + action = g_action_map_lookup_action (G_ACTION_MAP (win), "zoom-in"); + g_action_activate (action, NULL); +} + +void +zoom_out_cb (GtkWidget *widget, + PtWindow *win) +{ + GAction *action; + + action = g_action_map_lookup_action (G_ACTION_MAP (win), "zoom-out"); + g_action_activate (action, NULL); +} + static void add_timer (PtWindow *win) { @@ -322,16 +344,68 @@ } static void +update_insert_action_sensitivity_cb (GtkClipboard *clip, + const gchar *text, + gpointer data) +{ + PtWindow *win = PT_WINDOW (data); + PtPlayer *player = win->priv->player; + gchar *timestamp; + gboolean result = FALSE; + GAction *action; + + if (text) { + timestamp = g_strdup (text); + result = pt_player_string_is_timestamp (player, timestamp); + g_free (timestamp); + } + + action = g_action_map_lookup_action (G_ACTION_MAP (win), "insert"); + g_simple_action_set_enabled (G_SIMPLE_ACTION (action), result); +} + +static void +update_insert_action_sensitivity (GtkClipboard *clip, + GdkEvent *event, + gpointer data) +{ + PtWindow *win = PT_WINDOW (data); + +#ifdef GDK_WINDOWING_X11 + GAction *action; + GdkDisplay *display; + display = gtk_clipboard_get_display (clip); + if (GDK_IS_X11_DISPLAY (display) && !gdk_display_supports_selection_notification (display)) { + action = g_action_map_lookup_action (G_ACTION_MAP (win), "insert"); + g_simple_action_set_enabled (G_SIMPLE_ACTION (action), TRUE); + return; + } +#endif + + gtk_clipboard_request_text ( + clip, + update_insert_action_sensitivity_cb, + win); +} + +static void enable_win_actions (PtWindow *win, gboolean state) { - GAction *action; + GAction *action; + GtkClipboard *clip; action = g_action_map_lookup_action (G_ACTION_MAP (win), "copy"); g_simple_action_set_enabled (G_SIMPLE_ACTION (action), state); - action = g_action_map_lookup_action (G_ACTION_MAP (win), "insert"); - g_simple_action_set_enabled (G_SIMPLE_ACTION (action), state); + /* always disable on request, enable only conditionally */ + if (!state) { + action = g_action_map_lookup_action (G_ACTION_MAP (win), "insert"); + g_simple_action_set_enabled (G_SIMPLE_ACTION (action), state); + } else { + clip = gtk_clipboard_get (GDK_SELECTION_CLIPBOARD); + update_insert_action_sensitivity (clip, NULL, win); + } action = g_action_map_lookup_action (G_ACTION_MAP (win), "goto"); g_simple_action_set_enabled (G_SIMPLE_ACTION (action), state); @@ -637,6 +711,63 @@ gtk_scale_set_value_pos (GTK_SCALE (widget), GTK_POS_RIGHT); } +static void +swap_accelerators (GtkWidget *widget, + GtkAccelGroup *accels, + guint old, + guint new) +{ + gtk_widget_remove_accelerator ( + widget, + accels, + old, + GDK_CONTROL_MASK); + gtk_widget_add_accelerator ( + widget, + "clicked", + accels, + new, + GDK_CONTROL_MASK, + GTK_ACCEL_VISIBLE); +} + +void +jump_back_direction_changed_cb (GtkWidget *widget, + GtkTextDirection previous_direction, + gpointer data) +{ + PtWindow *self = PT_WINDOW (data); + guint old, new; + + if (previous_direction == GTK_TEXT_DIR_LTR) { + old = GDK_KEY_Left; + new = GDK_KEY_Right; + } else { + old = GDK_KEY_Right; + new = GDK_KEY_Left; + } + + swap_accelerators (widget, self->priv->accels, old, new); +} + +void +jump_forward_direction_changed_cb (GtkWidget *widget, + GtkTextDirection previous_direction, + gpointer data) +{ + PtWindow *self = PT_WINDOW (data); + guint old, new; + + if (previous_direction == GTK_TEXT_DIR_LTR) { + old = GDK_KEY_Right; + new = GDK_KEY_Left; + } else { + old = GDK_KEY_Left; + new = GDK_KEY_Right; + } + + swap_accelerators (widget, self->priv->accels, old, new); +} static void settings_changed_cb (GSettings *settings, @@ -664,6 +795,7 @@ if (uri) { win->priv->wavedata = pt_player_get_data (win->priv->player, g_settings_get_int (win->priv->editor, "pps")); + g_object_set (win->priv->waveviewer, "zoom", TRUE, NULL); pt_waveviewer_set_wave (PT_WAVEVIEWER (win->priv->waveviewer), win->priv->wavedata); pt_wavedata_free (win->priv->wavedata); @@ -804,19 +936,52 @@ g_object_unref (builder); /* Accels */ - GtkAccelGroup *accels; - accels = gtk_accel_group_new (); - gtk_window_add_accel_group (GTK_WINDOW (win), accels); + win->priv->accels = gtk_accel_group_new (); + gtk_window_add_accel_group (GTK_WINDOW (win), win->priv->accels); - gtk_widget_add_accelerator (menu_button, - "clicked", - accels, - GDK_KEY_F10, - 0, - GTK_ACCEL_VISIBLE); + gtk_widget_add_accelerator ( + menu_button, + "clicked", + win->priv->accels, + GDK_KEY_F10, + 0, + GTK_ACCEL_VISIBLE); + + guint jump_back, jump_forward; + if (gtk_widget_get_default_direction () == GTK_TEXT_DIR_LTR) { + jump_back = GDK_KEY_Left; + jump_forward = GDK_KEY_Right; + } else { + jump_back = GDK_KEY_Right; + jump_forward = GDK_KEY_Left; + } + + gtk_widget_add_accelerator ( + win->priv->button_jump_back, + "clicked", + win->priv->accels, + jump_back, + GDK_CONTROL_MASK, + GTK_ACCEL_VISIBLE); + + gtk_widget_add_accelerator ( + win->priv->button_jump_forward, + "clicked", + win->priv->accels, + jump_forward, + GDK_CONTROL_MASK, + GTK_ACCEL_VISIBLE); + + gtk_widget_add_accelerator ( + win->priv->button_play, + "clicked", + win->priv->accels, + GDK_KEY_space, + GDK_CONTROL_MASK, + GTK_ACCEL_VISIBLE); } -static void +void goto_toggled_cb (GtkToggleButton *button, gpointer data) { @@ -833,17 +998,6 @@ static void setup_goto_button (PtWindow *win) { - GtkWidget *image; - - image = gtk_image_new_from_resource ("/com/github/gkarsay/parlatype/icons/cursor.png"); - gtk_button_set_label (GTK_BUTTON (win->priv->goto_button), NULL); - gtk_button_set_image (GTK_BUTTON (win->priv->goto_button), image); - - g_signal_connect (win->priv->goto_button, - "toggled", - G_CALLBACK (goto_toggled_cb), - win); - g_object_bind_property ( win->priv->waveviewer, "follow-cursor", win->priv->goto_button, "active", @@ -854,6 +1008,7 @@ pt_window_init (PtWindow *win) { win->priv = pt_window_get_instance_private (win); + GtkClipboard *clip; gtk_widget_init_template (GTK_WIDGET (win)); @@ -879,6 +1034,12 @@ gtk_scale_set_value_pos (GTK_SCALE (win->priv->speed_scale), GTK_POS_LEFT); pt_window_ready_to_play (win, FALSE); + + clip = gtk_clipboard_get (GDK_SELECTION_CLIPBOARD); + g_signal_connect (clip, + "owner-change", + G_CALLBACK (update_insert_action_sensitivity), + win); } static void diff -Nru parlatype-1.5.4/src/pt-window-private.h parlatype-1.5.6/src/pt-window-private.h --- parlatype-1.5.4/src/pt-window-private.h 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/src/pt-window-private.h 2018-06-17 20:35:03.000000000 +0000 @@ -19,8 +19,8 @@ #include "config.h" #include -#include -#include +#include +#include struct _PtWindowPrivate { @@ -28,6 +28,7 @@ GDBusProxy *proxy; gint dbus_watch_id; GtkRecentManager *recent; + GtkAccelGroup *accels; PtPlayer *player; GtkWidget *progress_dlg; diff -Nru parlatype-1.5.4/src/resources/goto-dialog.ui parlatype-1.5.6/src/resources/goto-dialog.ui --- parlatype-1.5.4/src/resources/goto-dialog.ui 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/src/resources/goto-dialog.ui 2018-06-17 20:35:03.000000000 +0000 @@ -23,11 +23,11 @@ end - gtk-cancel + _Cancel + True True True True - True True @@ -37,13 +37,13 @@ - gtk-ok + _OK + True True True True True True - True True diff -Nru parlatype-1.5.4/src/resources/help-overlay.ui parlatype-1.5.6/src/resources/help-overlay.ui --- parlatype-1.5.4/src/resources/help-overlay.ui 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/src/resources/help-overlay.ui 2018-06-17 20:35:03.000000000 +0000 @@ -50,6 +50,45 @@ 1 + <ctrl>space + Play/Pause + + + + + 1 + <ctrl>Left + GTK_TEXT_DIR_LTR + Jump back + + + + + 1 + <ctrl>Right + GTK_TEXT_DIR_RTL + Jump back + + + + + 1 + <ctrl>Right + GTK_TEXT_DIR_LTR + Jump forward + + + + + 1 + <ctrl>Left + GTK_TEXT_DIR_RTL + Jump forward + + + + + 1 <ctrl>plus Zoom in @@ -98,7 +137,7 @@ 1 - <ctrl>F1 <ctrl>question + <ctrl>question Show keyboard shortcuts diff -Nru parlatype-1.5.4/src/resources/window-headerbar.ui parlatype-1.5.6/src/resources/window-headerbar.ui --- parlatype-1.5.4/src/resources/window-headerbar.ui 2017-11-02 10:50:29.000000000 +0000 +++ parlatype-1.5.6/src/resources/window-headerbar.ui 2018-06-17 20:35:03.000000000 +0000 @@ -9,14 +9,13 @@ - gtk-open + _Open Open a file True True True True True - True app.open