diff -Nru sane-backends-1.0.24/debian/changelog sane-backends-1.0.24/debian/changelog --- sane-backends-1.0.24/debian/changelog 2014-01-18 21:08:58.000000000 +0000 +++ sane-backends-1.0.24/debian/changelog 2014-01-18 23:12:23.000000000 +0000 @@ -1,30 +1,24 @@ -sane-backends (1.0.24-11) trusty; urgency=medium +sane-backends (1.0.24-12) trusty; urgency=medium - * Use libgphoto2-6-dev instead of libgphoto2-2-dev + * Last test before upload to Debian. - -- John Paul Adrian Glaubitz Sat, 18 Jan 2014 22:08:44 +0100 - -sane-backends (1.0.24-10) trusty; urgency=medium - - * Final test before uploading to Debian. - - -- John Paul Adrian Glaubitz Sat, 18 Jan 2014 21:50:52 +0100 + -- John Paul Adrian Glaubitz Sun, 19 Jan 2014 00:12:02 +0100 sane-backends (1.0.24-1.1) unstable; urgency=medium * Non-maintainer upload. * Fix FTBFS for binary-arch builds: - - install examples through debian/libsane-common.examples - - use proper source paths for sane.ps and backend-writing.txt; + + Install examples through debian/libsane-common.examples. + + Use proper source paths for sane.ps and backend-writing.txt; also fix the source path for the HTML files installed into - libsane-common - * Cleanup debian/changelog. + libsane-common. + * Clean up debian/changelog. -- John Paul Adrian Glaubitz Sat, 18 Jan 2014 21:07:24 +0100 sane-backends (1.0.24-1) unstable; urgency=low - * New upstream version. + * New upstream release. * New maintainer. (Closes: #688531) * Disable USB testing since it (probably) doesn't work on autobuilders. * Fixed a bunch of lintian warnings. @@ -53,24 +47,24 @@ * This package has been orphaned. Set maintainer to the Debian QA Group. * Bump compat level to 9 (was 5) and require debhelper >= 9. * debian/control: - - sane-utils: Inherit Section: graphics from source package sane-backends. - - Remove versioned dependencies. They are trivially satisfied. + + sane-utils: Inherit Section: graphics from source package sane-backends. + + Remove versioned dependencies. They are trivially satisfied. * Drop the following patches. They are merged upstream now. - - fix_v4l_build.patch - - hurd_path_max_fix.patch - - sane_desc_udev+acl.patch - - scanimage_man_batch_start.patch - - udev_usb_suspend.patch - - xerox_mfp_add_scx_4623fw.patch - - xerox_mfp_fix_usb_device.patch + + fix_v4l_build.patch + + hurd_path_max_fix.patch + + sane_desc_udev+acl.patch + + scanimage_man_batch_start.patch + + udev_usb_suspend.patch + + xerox_mfp_add_scx_4623fw.patch + + xerox_mfp_fix_usb_device.patch * Drop disable_rpath.patch because the RPATH is already removed by chrpath in debian/rules. * Rebase and refresh all other patches against the new upstream relase. * debian/rules: - - Simplify debian/rules by using dh sequencer. - - Build with --parallel and with autotools_dev. - - Enable all hardening build flags. - - Install umax_pp with sane-utils.install. + + Simplify debian/rules by using dh sequencer. + + Build with --parallel and with autotools_dev. + + Enable all hardening build flags. + + Install umax_pp with sane-utils.install. * Build-Depend on libtiff5-dev. Thanks to Michael Terry for the patch. (Closes: #681079) * Build-Depend on libusb-1.0-0-dev and enable libusb1.0 support in @@ -82,7 +76,7 @@ sane-backends (1.0.23-0.1~experimental1) experimental; urgency=low * Non-maintainer upload. - * New upstream version. + * New upstream release. -- John Paul Adrian Glaubitz Sat, 23 Feb 2013 20:12:58 +0100 @@ -103,7 +97,7 @@ sane-backends (1.0.22-7.2) unstable; urgency=low * Non-maintainer upload. - * Set sane-utils as 'Multi-Arch: foreign' (Closes: #675797). + * Set sane-utils as 'Multi-Arch: foreign'. (Closes: #675797) -- Michael Gilbert Thu, 28 Jun 2012 16:53:15 -0400 @@ -111,9 +105,9 @@ * Non-maintainer upload. * Fix pending l10n issues. Debconf translations: - - Catalan; (Innocent De Marchi). (Closes: #646505) - - Slovak (Slavko). (Closes: #639235) - - Polish (Michał Kułach). (Closes: #658351) + + Catalan; (Innocent De Marchi). (Closes: #646505) + + Slovak (Slavko). (Closes: #639235) + + Polish (Michał Kułach). (Closes: #658351) -- Christian Perrier Wed, 28 Mar 2012 07:39:00 +0200 @@ -121,7 +115,7 @@ * debian/patches/sane-desc.c_debian_mods.patch: + Updated; do not output a timestamp as part of the udev rules file - header, it is a source of conflict for multiarch. + header, it is a source of conflict for MultiArch. -- Julien BLACHE Mon, 21 Nov 2011 15:39:26 +0100 @@ -136,7 +130,7 @@ * debian/control: + Replace explicit architecture lists with appropriate architecture - wildcards; patch from Robert Millan (Closes: #634518). + wildcards; patch from Robert Millan. (Closes: #634518) + Use kfreebsd-any architecture wildcard for libcam-dev in libsane-dev's Depends field, getting rid of the custom libcam-dev substvar. + Use linux-any architecture wildcard for udev | makedev, acl in libsane's @@ -174,7 +168,6 @@ + Transfer documentation symlinks to libsane-common. * debian/libsane-dev.dirs: + Removed; pkgconfig directory created in debian/rules. - * debian/patches/multiarch_dll_search_path.patch: + Added; make /usr/lib/arch_triplet/sane the default location for SANE backends but keep /usr/lib/sane as a fallback for now. @@ -190,10 +183,9 @@ + Bump Standards-Version to 3.9.2 (no changes). * debian/libsane.NEWS: + Added; document the switch to ACLs starting with 1.0.22-1. - * debconf translations: - + pt_BR.po: update from Eder L. Marques (Closes: #619612). - + nl.po: courtesy of Jeroen Schot (Closes: #627043). + + pt_BR.po: update from Eder L. Marques. (Closes: #619612) + + nl.po: courtesy of Jeroen Schot. (Closes: #627043) -- Julien BLACHE Thu, 02 Jun 2011 14:57:53 +0200 @@ -203,30 +195,29 @@ + Added; switch to using power/control instead of power/level for device power setting, if available. * debian/patches/xerox_mfp_fix_usb_devices.patch: - + Added; fix detection/handling of USB devices in xerox_mfp - (Closes: #617307). + + Added; fix detection/handling of USB devices in xerox_mfp. + (Closes: #617307) * debian/patches/xerox_mfp_add_scx_4623fw.patch: + Added; add IDs for the Samsung SCX-4623FW. * debian/patches/hurd_path_max_fix.patch: - + Added; fix build on HURD where PATH_MAX is not defined - (Closes: #616299). + + Added; fix build on HURD where PATH_MAX is not defined. + (Closes: #616299) * debian/patches/scanimage_man_batch_start.patch: - + Added; fix improper documentation of --batch-start (Closes: #614009). + + Added; fix improper documentation of --batch-start. (Closes: #614009) -- Julien BLACHE Sat, 12 Mar 2011 11:32:32 +0100 sane-backends (1.0.22-1) unstable; urgency=low * New upstream release. - + epson2: reject scan area settings that would lead to a division by zero - (Closes: #581181). - + + epson2: reject scan area settings that would lead to a division by zero. + (Closes: #581181) * debian/control: + Bump Standards-Version to 3.9.1 (no changes). + Demote libsane-extras-* to Recommends again. * debian/rules: + Add acl (>= 2.2.49-4) to udev substvar for ACL utilities in /bin. - + Use sane-desc -m udev+acl (Closes: #591767, #612815). + + Use sane-desc -m udev+acl. (Closes: #591767, #612815) * debian/libsane.README.Debian: + Update; mention ConsoleKit and the udev rules now using ACLs. @@ -242,18 +233,16 @@ debian/patches/genesys_disable_raw_data_log.patch, debian/patches/fix_epson2_commands.patch, debian/patches/fix_epson2_cancel.patch: - + Removed; merged upstream. + - removed; merged upstream. -- Julien BLACHE Wed, 16 Feb 2011 19:00:55 +0100 sane-backends (1.0.22~git1.0.21-157-g126c70d-1) experimental; urgency=low * Git snapshot. - * debian/rules: + Add dependency on acl to libsane when depending on udev. + Use udev+acl mode when generating udev rules. - + debian/patches/sane-desc_udev+acl.patch: + Added; try using ACLs for USB scanners in an effort to deconflict with MFP devices. @@ -263,23 +252,23 @@ sane-backends (1.0.22~git1.0.21-87-g323ed01-1) experimental; urgency=low * Git snapshot. - + genesys now has some support for LiDE 100 & 200 (Closes: #586189). + + genesys now has some support for LiDE 100 & 200. (Closes: #586189) -- Julien BLACHE Wed, 23 Jun 2010 18:37:59 +0200 sane-backends (1.0.21-9) unstable; urgency=low * debian/patches/fix_epson2_cancel.patch: - + Added; fix handling of scanner errors by sending a cancel command - (Closes: #597922). + + Added; fix handling of scanner errors by sending a cancel command. + (Closes: #597922) -- Julien BLACHE Sun, 12 Dec 2010 16:31:25 +0100 sane-backends (1.0.21-8) unstable; urgency=low * debian/patches/fix_epson2_commands.patch: - + Added; fix list of supported commands for levels D1 and D2 - (Closes: #582066). + + Added; fix list of supported commands for levels D1 and D2. + (Closes: #582066) -- Julien BLACHE Mon, 29 Nov 2010 18:12:16 +0100 @@ -289,8 +278,7 @@ + Added; disable raw data logging. Raw data logging was enabled upstream at some point before 1.0.21 most probably as an oversight when committing new code. When enabled, a raw.pnm file is left - behind in the cwd when using the genesys backend (Closes: 602995). - + behind in the cwd when using the genesys backend. (Closes: #602995) * debconf translations: + Properly install vi.po, mistakenly put in po/ instead of debian/po in 1.0.21-6. @@ -302,34 +290,33 @@ * debian/patches/saned_exit_avahi_process.patch: + Added; exit Avahi process on error/loop termination. * debian/patches/xerox_mfp_new_ids.patch: - + Added; add USB IDs for supported machines in xerox_mfp (Closes: #601748). + + Added; add USB IDs for supported machines in xerox_mfp. (Closes: #601748) * debian/patches/scsi_perfection_2450.patch: - + Added; add SCSI IDs for the Perfection 2450 via FireWire - (Closes: #601810). + + Added; add SCSI IDs for the Perfection 2450 via FireWire. + (Closes: #601810) * debian/patches/scsi_scanjet_4c.patch: - + Added; add SCSI IDs for the ScanJet 4c (Closes: #601656). - + + Added; add SCSI IDs for the ScanJet 4c. (Closes: #601656) * debconf translations: - + vi.po: courtesy of Clytie Siddall (Closes: #601530). + + vi.po: courtesy of Clytie Siddall. (Closes: #601530) -- Julien BLACHE Sat, 06 Nov 2010 11:21:40 +0100 sane-backends (1.0.21-5) unstable; urgency=low * debconf translations: - + cs.po: courtesy of Miroslav Kure (Closes: #598338). + + cs.po: courtesy of Miroslav Kure. (Closes: #598338) + zh_CN.po: courtesy of YunQiang Su (Closes: #599590, #599591). - + da.po: courtesy of Joe Dalton (Closes: #599642). - + eu.po: courtesy of Iñaki Larrañaga Murgoitio (Closes: #599810). - + es.po: courtesy of Camaleón (Closes: #600342). - + fi.po: courtesy of Esko Arajärvi (Closes: #600514). + + da.po: courtesy of Joe Dalton. (Closes: #599642) + + eu.po: courtesy of Iñaki Larrañaga Murgoitio. (Closes: #599810) + + es.po: courtesy of Camaleón. (Closes: #600342) + + fi.po: courtesy of Esko Arajärvi. (Closes: #600514) -- Julien BLACHE Mon, 18 Oct 2010 10:08:12 +0200 sane-backends (1.0.21-4) unstable; urgency=low * debconf translations: - + it.po: courtesy of Luca Monducci (Closes: #593722). + + it.po: courtesy of Luca Monducci. (Closes: #593722) -- Julien BLACHE Sun, 05 Sep 2010 09:44:28 +0200 @@ -337,26 +324,24 @@ * debian/control: + Bump Standards-Version to 3.9.0 (no changes). - * debian/patches/use_libsane_matched_for_scsi.patch: + Added; use libsane_matched for SCSI scanners rules too. * debian/patches/allow_dll.d_symlinks.patch: - + Added; allow symlinks under /etc/sane.d/dll.d (Closes: #588392). + + Added; allow symlinks under /etc/sane.d/dll.d. (Closes: #588392) -- Julien BLACHE Fri, 09 Jul 2010 18:21:58 +0200 sane-backends (1.0.21-2) unstable; urgency=low * debian/patches/fix_xerox_mfp_color_mode.patch: - + Added; fix xerox_mfp color mode, from upstream (Closes: #583789). + + Added; fix xerox_mfp color mode, from upstream. (Closes: #583789) -- Julien BLACHE Tue, 01 Jun 2010 19:34:19 +0200 sane-backends (1.0.21-1) unstable; urgency=low - * New upstream release (Closes: #579254). + * New upstream release. (Closes: #579254) * Moved to source format 3.0 (quilt). - * debian/control: + Removed dpatch build-dep. + Add dependency on pkg-config to libsane-dev. @@ -364,7 +349,6 @@ + Removed dpatch code. + --disable-fork-process -> --enable-pthread. + Install the pkg-config file for sane-backends. - * All patches refreshed, tagged with DEP-3 headers. -- Julien BLACHE Mon, 26 Apr 2010 19:59:08 +0200 @@ -372,47 +356,42 @@ sane-backends (1.0.20-14) unstable; urgency=low * debian/control: - + Depend and build-depend on libjpeg-dev instead of libjpeg62-dev - (Closes: #569240). + + Depend and build-depend on libjpeg-dev instead of libjpeg62-dev. + (Closes: #569240) + Bump Standards-Version to 3.8.4 (no changes). - * debian/sane-utils.saned.init: + Add $remote_fs to Required-Start & Required-Stop. - * debconf translations: - + fr.po: courtesy of Christian Perrier (Closes: #564595). + + fr.po: courtesy of Christian Perrier. (Closes: #564595) -- Julien BLACHE Sat, 13 Feb 2010 10:03:12 +0100 sane-backends (1.0.20-13) unstable; urgency=low * debian/patches/34_genesys_gl841_cal_fix.dpatch: - + Added; fix calibration on gl841-based scanners (Closes: #563163). - + + Added; fix calibration on gl841-based scanners. (Closes: #563163) * debconf translations: - + ja.po: courtesy of Hideki Yamane (Closes: #564294). + + ja.po: courtesy of Hideki Yamane. (Closes: #564294) -- Julien BLACHE Sun, 10 Jan 2010 15:21:22 +0100 sane-backends (1.0.20-12) unstable; urgency=low * debian/patches/33_epson2_update.dpatch: - + Update epson2 from git HEAD (Closes: #534746). - + + Update epson2 from git HEAD. (Closes: #534746) * debconf translations: - + de.po: courtesy of Helge Kreutzmann (Closes: #562709). - + sv.po: courtesy of Martin Bagge (Closes: #562931). - + ru.po: courtesy of Yuri Kozlov (Closes: #563076). - + pt.po: courtesy of Américo Monteiro (Closes: #563174). + + de.po: courtesy of Helge Kreutzmann. (Closes: #562709) + + sv.po: courtesy of Martin Bagge. (Closes: #562931) + + ru.po: courtesy of Yuri Kozlov. (Closes: #563076) + + pt.po: courtesy of Américo Monteiro. (Closes: #563174) -- Julien BLACHE Fri, 01 Jan 2010 12:49:10 +0100 sane-backends (1.0.20-11) unstable; urgency=medium * Urgency set to medium to unbreak saned in testing. - * debian/patches/12_saned_polling_fix.dpatch: - + Added; unbreak saned's polling loop for more than 1 fds (Closes: #562248). + + Added; unbreak saned's polling loop for more than 1 fds. (Closes: #562248) * debian/patches/13_saned_aliasing_fix.dpatch: + Added; fix strict aliasing issues in saned for gcc 4.4. @@ -424,17 +403,16 @@ + Updated udev-related information and instructions, added a note about only adding rules for scanners supported by libsane. * debian/sane-utils.saned.init: - + Add missing --oknodo in s-s-d stop call in restart case - (Closes: #558648). + + Add missing --oknodo in s-s-d stop call in restart case. + (Closes: #558648) * debian/sane-utils.templates: - + Rework the standalone saned template and mention Avahi explicitly - (Closes: #556877). - + + Rework the standalone saned template and mention Avahi explicitly. + (Closes: #556877) * debian/patches/22_dll_backend_conf.dpatch: + Updated; use better wording for the comment about the net backend - in dll.conf (Closes: #556912). + in dll.conf. (Closes: #556912) * debian/patches/32_epson_perfection636.dpatch: - + Added; add the Epson Perfection 636 SCSI scanner (Closes: #555971). + + Added; add the Epson Perfection 636 SCSI scanner. (Closes: #555971) -- Julien BLACHE Sat, 12 Dec 2009 11:33:09 +0100 @@ -442,29 +420,27 @@ * debian/patches/11_udev_147.dpatch: + Added; remove NAME= from SCSI rules as udev 147 complains about it. Also - remove support for kernel < 2.6.22. (Closes: #555443). + remove support for kernel < 2.6.22. (Closes: #555443) -- Julien BLACHE Mon, 09 Nov 2009 21:01:32 +0100 sane-backends (1.0.20-8) unstable; urgency=low * debian/rules: - + Fix nostrip builds, thanks to Tollef Fog Heen (Closes: #548152). - + + Fix nostrip builds, thanks to Tollef Fog Heen. (Closes: #548152) * debian/patches/31_genesys_raw_log_fix.dpatch: + Added; add missing check when logging raw data. Patch by - Tollef Fog Heen (Closes: #548154). + Tollef Fog Heen . (Closes: #548154) -- Julien BLACHE Sat, 26 Sep 2009 11:44:04 +0200 sane-backends (1.0.20-7) unstable; urgency=low * debian/control: - + Demote avahi-daemon to a Suggests (Closes: #543335). - + libv4l-dev is not available on hurd-i386 either (Closes: #545995). - + + Demote avahi-daemon to a Suggests. (Closes: #543335) + + libv4l-dev is not available on hurd-i386 either. (Closes: #545995) * debian/patches/30_xerox_samsung_ids.dpatch: - + Added; add USB IDs for various Samsung-branded MFPs (Closes: #545290). + + Added; add USB IDs for various Samsung-branded MFPs. (Closes: #545290) -- Julien BLACHE Fri, 11 Sep 2009 19:16:15 +0200 @@ -474,10 +450,9 @@ + Bump Standards-Version to 3.8.3 (no changes). * debian/rules: + Empty dependency_libs in all .la files. - * debian/patches/10_sanei_usb_update.dpatch: - + Added; from git, favour the interface detected by sanei_usb_init(). This - helps with some machines like the Canon MP730. + + Added; from git, favour the interface detected by sanei_usb_init(). + This helps with some machines like the Canon MP730. -- Julien BLACHE Sat, 29 Aug 2009 16:55:34 +0200 @@ -485,9 +460,8 @@ * debian/control: + Bump Standards-Version to 3.8.2 (no changes). - * debian/patches/08_cardscan_usbids.dpatch: - + Added; fix USB IDs for the CardScan 800c (Closes: #528829). + + Added; fix USB IDs for the CardScan 800c. (Closes: #528829) * debian/patches/09_po_update_es_add_gl.dpatch: + Added; update es translation and add new gl translation, courtesy of Miguel Bouzada . @@ -502,16 +476,15 @@ * debian/rules: + Serialize autotools/patch/configure for parallel builds, now that - parallel builds are possible with the upstream build system - (Closes: #506620). + parallel builds are possible with the upstream build system. + (Closes: #506620) * debian/control: + Bump libsane-extras dependencies to 1.0.20.1. * debian/sane-utils.saned.init: - + Add status action, taken from iaxmodem (Closes: #528265). - + + Add status action, taken from iaxmodem. (Closes: #528265) * debian/patches/07_tools_missing_libcam.dpatch: + Added; fix sane_find_scanner build on kFreeBSD by adding missing SCSI - libraries. From upstream via Aurélien JARNO (Closes: #528594). + libraries. From upstream via Aurélien JARNO. (Closes: #528594) -- Julien BLACHE Thu, 14 May 2009 12:06:47 +0200 @@ -519,16 +492,15 @@ * debian/patches/06_cap_always_settable.dpatch: + Added; add back SANE_CAP_ALWAYS_SETTABLE which was mistakenly - removed from SANE 1.0.20 (Closes: #527675, #527682). + removed from SANE 1.0.20. (Closes: #527675, #527682) -- Julien BLACHE Fri, 08 May 2009 21:03:56 +0200 sane-backends (1.0.20-2) unstable; urgency=low - * Update previous changelog entry wrt #519101 resolution. - + * Update previous changelog entry with regard to #519101 resolution. * debian/patches/04_udev_rules_fix.dpatch: - + Added; fix udev rules, use ATTRS instead of ATTR (Closes: #527196). + + Added; fix udev rules, use ATTRS instead of ATTR. (Closes: #527196) * debian/patches/05_saned_avahi_fds_fix.dpatch: + Added; fix a possible net backend hang when saned is run in debug mode. Could also happen in standalone mode, but a lot less likely. @@ -538,9 +510,8 @@ sane-backends (1.0.20-1) unstable; urgency=low * New upstream release. - + Unsupported devices are no longer included in the udev rules - (Closes: #519101). - + + Unsupported devices are no longer included in the udev rules. + (Closes: #519101) * debian/control: + Bump Standards-Version to 3.8.1 (no changes). + Add build-dep on libv4l-dev. @@ -549,28 +520,23 @@ * debian/rules: + Use DESTDIR at install time. + Remove rpath from sane-find-scanner. - * debian/patches/01_missing_pthreads.dpatch: + Added; new build system breaks build when using pthreads. * debian/patches/02_frontends_libs.dpatch: + Added; only link the frontends with the libraries they need. * debian/patches/03_libsane_deps.dpatch: + Added; reduce libsane.so deps to the bare minimum. - * debian/patches/11_minimum_linkage.dpatch: + Removed; build system was redone using automake and this isn't needed anymore. * debian/patches/12_new_configure.dpatch: + Removed; not needed anymore, due to #11 going away. - * debian/patches/21_sane-config.in_no_rpath.dpatch: + Updated; updated for new build system. * debian/patches/23_unneeded_doc.dpatch: + Updated; updated for new build system. - * debian/patches/22_dll_backend_conf.dpatch: + Updated; dll.d support has been merged upstream, update dll.conf header. - * debian/patches/01_manpages_fixes.dpatch, 02_pixma_update.dpatch, 03_snapscan_usb_ftok_fix.dpatch, 04_sane-desc_hal_new.dpatch, 05_hp_timing_fix.dpatch, 06_sanei_scsi_attach_fix.dpatch, @@ -579,7 +545,7 @@ 30_new_saned.dpatch, 31_sanei_pthread_64bit_fix.dpatch, 32_net_backend_standard_fix.dpatch, 33_scanimage_options_fix.dpatch, 40_fujitsu_fixes.dpatch, 41_epjitsu_fixes.dpatch: - + Removed; fixes and enhancements taken from upstream or merged upstream + - removed; fixes and enhancements taken from upstream or merged upstream in this release. -- Julien BLACHE Mon, 04 May 2009 12:45:50 +0200 @@ -588,14 +554,12 @@ * debian/rules: + Do not generate /etc/modprobe.d/libsane anymore. - * debian/libsane.preinst: + Remove obsolete /etc/modprobe.d/libsane conffile. - * debian/patches/30_new_saned.dpatch: + Updated; workaround for backends writing to stdin/stderr/stdout when run via inetd, which breaks the network dialog and causes the remote - net backend to crash (Closes: #516982). + net backend to crash. (Closes: #516982) -- Julien BLACHE Wed, 04 Mar 2009 10:49:42 +0100 @@ -607,11 +571,10 @@ + Add ${misc:Depends}. * debian/sane-utils.postrm: + Make the script set -e. - * debian/patches/30_new_saned.dpatch: + Updated; (net backend) do not attempt to lock the Avahi polling thread before stopping it, it now produces a deadlock. Looks like - a change/fix was made in Avahi (Closes: #513122). + a change/fix was made in Avahi. (Closes: #513122) -- Julien BLACHE Wed, 18 Feb 2009 11:50:31 +0100 @@ -621,7 +584,6 @@ + Enable use of pthread instead of fork for reader processes. * debian/libsane.postinst: + Remove code dealing with devfs/hotplug/hotplug-ng. - * debian/patches/11_minimum_linkage.dpatch: + Update; add $(LIBPTHREAD) to library dependencies where needed. @@ -632,16 +594,15 @@ * debian/patches/09_avision_fixes.dpatch: + Updated; fix reader task handling to not signal the whole process group erroneously. - * debconf translations: - + it.po: courtesy of Luca Monducci (Closes: #507563). + + it.po: courtesy of Luca Monducci. (Closes: #507563) -- Julien BLACHE Tue, 09 Dec 2008 16:14:06 +0100 sane-backends (1.0.19-22) unstable; urgency=low * debian/patches/41_epjitsu_fixes.dpatch: - + Added; from CVS, fix double-free issues in epjitsu (Closes: #506750). + + Added; from CVS, fix double-free issues in epjitsu. (Closes: #506750) -- Julien BLACHE Mon, 24 Nov 2008 15:02:04 +0100 @@ -650,10 +611,9 @@ * debian/rules: + Use an error handler for saned's init. * debian/sane-utils.postinst: - + Added error handler for saned init (Closes: #493745). - + + Added error handler for saned init. (Closes: #493745) * debconf translations: - + es.po: courtesy of Ignacio Mondino (Closes: #499202). + + es.po: courtesy of Ignacio Mondino. (Closes: #499202) -- Julien BLACHE Fri, 19 Sep 2008 10:50:04 +0200 @@ -671,14 +631,13 @@ sane-backends (1.0.19-19) unstable; urgency=low * debian/rules: - + Install umax_pp into sane-utils (Closes: #496833). - + + Install umax_pp into sane-utils. (Closes: #496833) * debian/patches/40_fujitsu_fixes.dpatch: + Added; upstream backport of fujitsu backend fixes, fixes a string initialization issue in config file parsing, adds color mode for the fi-6130, 6230, 6140, 6240 and fixes fi-6230 hangs at wakeup from - powersave mode. - Thanks to M. Allan Noah for providing a backport (Closes: #494156). + powersave mode. (Closes: #494156) Thanks to M. Allan Noah for + providing a backport. -- Julien BLACHE Thu, 28 Aug 2008 10:31:35 +0200 @@ -686,10 +645,9 @@ * debian/patches/10_sm3840_unbreak_sane_open.dpatch: + Added; from CVS, fix the way sane_open() checks for sanei_usb_open() - errors (Closes: #496249). - + errors. (Closes: #496249) * debconf translations: - + ja.po: courtesy of Hideki Yamane (Closes: #493568). + + ja.po: courtesy of Hideki Yamane. (Closes: #493568) -- Julien BLACHE Wed, 27 Aug 2008 19:58:15 +0200 @@ -709,7 +667,7 @@ * debian/patches/30_new_saned.dpatch: + Updated; Fix seteuid()/setegid() call order and set supplemental group - list (Closes: #493084). + list. (Closes: #493084) -- Julien BLACHE Thu, 31 Jul 2008 11:46:53 +0200 @@ -730,7 +688,6 @@ should fix some issues reported with the net backend lately. * debian/patches/01_manpages_fixes.dpatch: + Updated; fix some more hyphen vs. minus sign issues. - * debian/rules: + Include debug symbols for sane-utils into libsane-dbg. * debian/copyright: @@ -741,7 +698,7 @@ sane-backends (1.0.19-13) unstable; urgency=low * debian/libsane.README.Debian: - + Fix udev rules filename (Closes: #490656). + + Fix udev rules filename. (Closes: #490656) * debian/patches/01_manpages_fixes.dpatch: + Updated; fix hyphen vs. minus sign issues reported by lintian. * debian/patches/30_new_saned.dpatch: @@ -753,7 +710,6 @@ * debian/control: + Bump Standards-Version to 3.8.0 (no changes). - * debian/patches/30_new_saned.dpatch: + Updated; properly terminate child processes when exiting from the debug mode. @@ -762,9 +718,8 @@ back in sane_control_option(). Fetch options descriptors in sane_open() so GET_VALUE on option 0 can still work without explicitely getting option descriptor 0 first. - * debconf translations: - + sv.po: courtesy of Martin Bagge (Closes: #487369). + + sv.po: courtesy of Martin Bagge. (Closes: #487369) -- Julien BLACHE Tue, 24 Jun 2008 22:10:35 +0200 @@ -772,22 +727,20 @@ * debian/patches/30_new_saned.dpatch: + Updated; lock the Avahi thread before stopping it and tearing down the - Avahi objects (Closes: #484464). + Avahi objects. (Closes: #484464) * debian/patches/09_avision_fixes.dpatch: - + Added; from CVS, misc avision backend fixes (Closes: #474706, #475198). - + + Added; from CVS, misc avision backend fixes. (Closes: #474706, #475198) * debconf translations: - + ru.po: courtesy of Yuri Kozlov (Closes: #481656). + + ru.po: courtesy of Yuri Kozlov. (Closes: #481656) -- Julien BLACHE Fri, 06 Jun 2008 17:37:28 +0200 sane-backends (1.0.19-10) unstable; urgency=low * debian/sane-utils.postinst: - + Make proper use of debconf !@#%$ (Closes: #481442). - + + Make proper use of debconf !@#%$. (Closes: #481442) * debconf translations: - + fr.po: update by Christian Perrier (Closes: #481439). + + fr.po: update by Christian Perrier. (Closes: #481439) -- Julien BLACHE Fri, 16 May 2008 19:26:48 +0200 @@ -795,7 +748,7 @@ * debian/sane-utils.postinst: + Do not attempt to remove saned from the scanner group if it isn't part - of the group in the first place (Closes: #481288). + of the group in the first place. (Closes: #481288) * debian/patches/31_sanei_pthread_64bit_fix.dpatch: + Added; from CVS, fix sanei_pthread on 64bit platforms. @@ -806,11 +759,11 @@ * Reupload 1.0.19-7 to unstable. * debconf translations: - + pt.po: courtesy of Américo Monteiro (Closes: #480219). - + cs.po: courtesy of Miroslav Kure (Closes: #480313). - + de.po: courtesy of Helge Kreutzmann (Closes: #480366). - + vi.po: courtesy of Clytie Siddall (Closes: #480483). - + fi.po: courtesy of Esko Arajärvi (Closes: #480550). + + pt.po: courtesy of Américo Monteiro. (Closes: #480219) + + cs.po: courtesy of Miroslav Kure. (Closes: #480313) + + de.po: courtesy of Helge Kreutzmann. (Closes: #480366) + + vi.po: courtesy of Clytie Siddall. (Closes: #480483) + + fi.po: courtesy of Esko Arajärvi. (Closes: #480550) + fr.po: update by Christian Perrier. -- Julien BLACHE Wed, 14 May 2008 19:13:29 +0200 @@ -818,9 +771,8 @@ sane-backends (1.0.19-7) experimental; urgency=low * Introducing new saned & net backend features. - + saned can now run as a standalone daemon and offers mDNS/DNS-SD. The net - backend can discover saned servers on the (local) network. - + + saned can now run as a standalone daemon and offers mDNS/DNS-SD. + The net backend can discover saned servers on the (local) network. * debian/patches/01_manpages_fixes.dpatch: + Fix man warnings in sane-config.1 and sane-mustek_pp.5. * debian/patches/30_new_saned.dpatch: @@ -847,18 +799,18 @@ + Add an initscript & default file for saned. * debconf translations: - + eu.po: courtesy of Piarres Beobide (Closes: #479380, #479808). + + eu.po: courtesy of Piarres Beobide. (Closes: #479380, #479808) + fr.po: courtesy of Christian Perrier. - + pt_BR.po: courtesy of Eder L. Marques (Closes: #479785). - + gl.po: courtesy of Jacobo Tarrio (Closes: #479838). + + pt_BR.po: courtesy of Eder L. Marques. (Closes: #479785) + + gl.po: courtesy of Jacobo Tarrio. (Closes: #479838) -- Julien BLACHE Wed, 07 May 2008 18:37:07 +0200 sane-backends (1.0.19-6) unstable; urgency=low * debian/patches/08_epson2_be_nice_to_saned.dpatch: - + Added; from CVS, be nice to saned and do not pollute fd 0 - (Closes: #479052). + + Added; from CVS, be nice to saned and do not pollute fd 0. + (Closes: #479052) -- Julien BLACHE Sat, 03 May 2008 16:46:12 +0200 @@ -866,8 +818,8 @@ * debian/patches/07_epson2_be_nice.dpatch: + Added; from CVS, be nice to other backends and close the scanner device - when the device is not recognized (or another error happens) - (Closes: #476468). + when the device is not recognized (or another error happens). + (Closes: #476468) -- Julien BLACHE Sat, 19 Apr 2008 17:16:13 +0200 @@ -879,12 +831,12 @@ * debian/patches/04_sane-desc_hal_new.dpatch: + Added; add support for newer HAL versions. * debian/patches/05_hp_timing_fix.dpatch: - + Added; fix timing issue with HP scanners (Closes: #472819). + + Added; fix timing issue with HP scanners. (Closes: #472819) * debian/patches/06_sanei_scsi_attach_fix.dpatch: + Added; from CVS, continue to iterate over the list of devices even if an attempt to attach one of the devices fails. * debian/rules: - + Generate HAL FDI file for newer HAL versions (Closes: #472664). + + Generate HAL FDI file for newer HAL versions. (Closes: #472664) * debian/libsane-dev.doc-base: + Fix doc-base section. @@ -896,7 +848,7 @@ + Removed; reenable the epson2 backend. * debian/patches/03_snapscan_usb_ftok_fix.dpatch: + Added; work around the usage of ftok() in the snapscan backend. See - the patch description for details (Closes: #466855). + the patch description for details. (Closes: #466855) -- Julien BLACHE Sat, 15 Mar 2008 16:16:38 +0100 @@ -904,16 +856,16 @@ * debian/patches/02_pixma_update.dpatch: + Added; update pixma backend from CVS, adding support for - - Pixma MP210, MP470, MP520, MP610, MultiPASS MP710 - - MP140, MP220, MultiPASS MP740 (untested) - - MP970 (experimental, untested) - (Closes: #468270). + - Pixma MP210, MP470, MP520, MP610, MultiPASS MP710 + - MP140, MP220, MultiPASS MP740 (untested) + - MP970 (experimental, untested) + (Closes: #468270) * debian/rules: - + Generate and install HAL fdi file (Closes: #466540). + + Generate and install HAL fdi file. (Closes: #466540) * debian/control: + Add update-inetd dependency for sane-utils. * debian/sane-utils.postinst, debian/sane-utils.postrm: - + Add support for update-inetd (Closes: #426514). + + Add support for update-inetd. (Closes: #426514) * debian/sane-utils.README.Debian: + Document update-inetd usage. @@ -926,8 +878,8 @@ Fujitsu), epson2 (various Epson scanners), hp3900 (HP ScanJet 3970 and more), hp5590 (HP ScanJet 5590 and more), hpljm1005 (HP LaserJet M1005 and more), hs2p (Ricoh IS400 series) - + Fix for the pixma backend (Closes: #459663). - + Regression fix for the avision backend (Closes: #458478, #458932). + + Fix for the pixma backend. (Closes: #459663) + + Regression fix for the avision backend. (Closes: #458478, #458932) * debian/patches/02_hurd_no_plustek_pp.dpatch: + Removed; merged upstream. * debian/patches/11_minimum_linkage.dpatch: @@ -942,12 +894,12 @@ sane-backends (1.0.19~cvs20071213-5) unstable; urgency=low * debian/control: - + Build-Depends: xutils-dev instead of xutils. - + Depend on libsane-extras{,-dev,-dbg} to help fix up the buggy udev rules - in libsane-extras. + + Build-Depends: xutils-dev instead of xutils. + + Depend on libsane-extras{,-dev,-dbg} to help fix up the + buggy udev rules in libsane-extras. + Promote libgphoto2-2-dev to Depends: for libsane-dev. * debian/patches/02_hurd_no_plustek_pp.dpatch: - + Added; do not build plustek_pp on Hurd (Closes: #457378). + + Added; do not build plustek_pp on Hurd. (Closes: #457378) * debian/patches/12_new_configure.dpatch: + Updated. @@ -1006,9 +958,10 @@ sane-backends (1.0.19~cvs20071028-1) unstable; urgency=low * New CVS snapshot. - + All backends now declare OPT_NUM_OPTS of type SANE_TYPE_INT (Closes: #448162). - + Fixed USB IDs for the Epson CX-6600 (Closes: #419349). - + Added USB IDs for the Epson DX-6000 (Closes: #442051). + + All backends now declare OPT_NUM_OPTS of type SANE_TYPE_INT. + (Closes: #448162) + + Fixed USB IDs for the Epson CX-6600. (Closes: #419349) + + Added USB IDs for the Epson DX-6000. (Closes: #442051) * debian/control: + libsane-dev Recommends: libgphoto2-2-dev. @@ -1017,14 +970,14 @@ sane-backends (1.0.19~cvs20070730-1) unstable; urgency=low * New CVS snapshot. - + Workaround for CONFIG_USB_SUSPEND (Closes: #434276). + + Workaround for CONFIG_USB_SUSPEND. (Closes: #434276) * debian/control, debian/rules: - + Make libsane depend on makedev | udev on Linux (Closes: #428220). + + Make libsane depend on makedev | udev on Linux. (Closes: #428220) * debian/libsane.postinst: + Change MAKEDEV invocation to invoke /dev/MAKEDEV instead of /sbin/MAKEDEV. * debian/control: - + Do not {build-,}depend on libusb-dev nor libieee1284-dev on hurd-i386 - (Closes: #434575). + + Do not {build-,}depend on libusb-dev nor libieee1284-dev on hurd-i386. + (Closes: #434575) + Use ${binary:Version} instead of ${Source-Version}. * debian/rules: + Do not ignore make distclean errors. @@ -1039,7 +992,7 @@ + Added; use the SG_IO ioctl interface instead of the asynchronous read/write SG3 interface. This allows the use of SCSI scanners in mixed 32/64bit environments, thanks to the ioctl 32bit compatibility - layer taking care of the 32/64bit sg_hdr conversion (Closes: #420193). + layer taking care of the 32/64bit sg_hdr conversion. (Closes: #420193) If you own a SCSI scanner, please report back on this change; especially if, compared to the previous version (1.0.19~cvs20070505-2): @@ -1054,7 +1007,7 @@ sane-backends (1.0.19~cvs20070505-2) unstable; urgency=low * debian/patches/01_disable_epson2.dpatch: - + Added; disable epson2 backend by default (Closes: #422697). + + Added; disable epson2 backend by default. (Closes: #422697) -- Julien BLACHE Sat, 12 May 2007 10:37:11 +0200 @@ -1095,7 +1048,7 @@ sane-backends (1.0.18-6) unstable; urgency=low - * Enable libieee1284 support on kFreeBSD-amd64 (Closes: #413178). + * Enable libieee1284 support on kFreeBSD-amd64. (Closes: #413178) * debian/control: + Build-depend on libieee1284-3-dev (>= 0.2.10-5) for all architectures. + libsane-dev depends on libieee1284-3-dev (>= 0.2.10-5) for all architectures. @@ -1108,7 +1061,7 @@ * debian/patches/32_microtek2_add_check.dpatch: + Added; Add missing return status check, preventing a segfault later - on (Closes: #398153). + on. (Closes: #398153) * debian/patches/33_manpages_fixes.dpatch: + Added; fix man warnings in some manpages. @@ -1118,7 +1071,7 @@ * debian/patches/31_epson_remove_check.dpatch: + Added; Remove bogus check in epson backend get_identity2_information() - affecting Stylus CX5xxx models (Closes: #399119, #402444). + affecting Stylus CX5xxx models. (Closes: #399119, #402444) * debian/sane-utils.README.Debian: + Fix typo, the manpage for saned is in section 8 not 1. * debian/control: @@ -1132,8 +1085,8 @@ sane-backends (1.0.18-3) unstable; urgency=low * debian/patches/30_udev_long_comment_lines.dpatch: - + Added; split very long comment lines in the udev rules file - (Closes: #376859). + + Added; split very long comment lines in the udev rules file. + (Closes: #376859) * debian/libsane.README.Debian: + Updated; udev no longer sets permissions on /proc/bus/usb/xxx/yyy, /dev/bus/usb/xxx/yyy is used instead now. @@ -1151,8 +1104,8 @@ sane-backends (1.0.18-1) unstable; urgency=low * New upstream release. - + New backends: dell1600n_net, hp3500, pixma, stv680 (Closes: #360303). - + Canon LiDE 60 USBids added to the genesys description file (Closes: #366871). + + New backends: dell1600n_net, hp3500, pixma, stv680. (Closes: #360303) + + Canon LiDE 60 USBids added to the genesys description file. (Closes: #366871) * debian/patches/01_usbids.dpatch: + Removed; merged upstream. * debian/patches/26_manpages_spelling_fixes.dpatch: @@ -1178,7 +1131,7 @@ * debian/control: + Bumped Standards-Version to 3.7.2 (no changes). + Build-Depend on debhelper (>= 5.0.0) for DH_COMPAT=5. - + New libsane-dbg binary for debugging symbols (Closes: #366767). + + New libsane-dbg binary for debugging symbols. (Closes: #366767) * debian/rules: + Tell dh_strip to put debugging symbols into libsane-dbg. @@ -1187,7 +1140,7 @@ sane-backends (1.0.17-3) unstable; urgency=low * debian/control: - + Add ${libieee1284-3-dev} to libsane-dev Depends: (Closes: #364294). + + Add ${libieee1284-3-dev} to libsane-dev Depends. (Closes: #364294) -- Julien BLACHE Sat, 22 Apr 2006 19:58:12 +0200 @@ -1204,19 +1157,19 @@ [ Julien BLACHE ] * debian/patches/02_udev_rules.dpatch: + Removed; coldplugging now works OK, the hotplug script aren't needed - anymore (Closes: #359800). + anymore. (Closes: #359800) * debian/patches/03_usb_perms_664.dpatch: + Updated. * debian/patches/04_udev_rules_fix.dpatch: + Added; fix udev rules file so that the rules only run for ACTION=add - on the usb subsystem (Closes: #359797). + on the usb subsystem. (Closes: #359797) * debian/patches/01_usbids.dpatch: - + Added; add Epson Stylus CX7800 USB IDs (Closes: #350436). + + Added; add Epson Stylus CX7800 USB IDs. (Closes: #350436) * debian/patches/26_manpages_spelling_fixes.dpatch: - + Added; various spelling fixes to the manpages (Closes: #357568). + + Added; various spelling fixes to the manpages. (Closes: #357568) * debian/control: + Removed Conflicts: on very old SANE versions. - + Recommends: module-init-tools (>= 3.2.2-1) (Closes: #344541). + + Recommends: module-init-tools (>= 3.2.2-1). (Closes: #344541) + Recommends: udev (>= 0.88-1) for a version of udev with working coldplugging support. Let me know if the version can be lowered, thanks. @@ -1231,8 +1184,8 @@ [ Julien BLACHE ] * New upstream release. + New backends: hp4200, lexmark, mustek_usb2. - + Now ignores EBUSY on set_configuration for real (Closes: #332281). - + Fixed USB IDs for BearPaw 2448 TA Plus to use only lowercase letters (Closes: #341046). + + Now ignores EBUSY on set_configuration for real. (Closes: #332281) + + Fixed USB IDs for BearPaw 2448 TA Plus to use only lowercase letters. (Closes: #341046) * debian/patches/01_hotplug_usbids.dpatch: + Removed; merged upstream. * debian/patches/02_tools_udev.dpatch: @@ -1252,13 +1205,13 @@ sane-backends (1.0.16-5) unstable; urgency=low * debian/patches/02_tools_udev.dpatch: - + Run the hotplug.d script to ensure a working coldplug (Closes: #334068). + + Run the hotplug.d script to ensure a working coldplug. (Closes: #334068) * debian/patches/30_misc_fixes.dpatch: - + Fix a typo in sane-find-scanner(1) (Closes: #310333). + + Fix a typo in sane-find-scanner(1). (Closes: #310333) * debian/patches/34_sanei_usb_ignore_set_config_ebusy.dpatch: - + Ignore EBUSY on set_configuration to better accomodate MFC devices (Closes: #332281). + + Ignore EBUSY on set_configuration to better accomodate MFC devices. (Closes: #332281) * debian/libsane.postrm: - + Remove /etc/udev/rules.d/025_libsane.rules on purge (Closes: #333569). + + Remove /etc/udev/rules.d/025_libsane.rules on purge. (Closes: #333569) -- Julien BLACHE Thu, 27 Oct 2005 20:25:16 +0200 @@ -1289,7 +1242,7 @@ * debian/patches/11_hotplug_wait_for_device.dpatch: + Bump timeout to 25 seconds. * debian/patches/01_hotplug_usbids.dpatch: - + Added; pulled from CVS (Closes: #323607). + + Added; pulled from CVS. (Closes: #323607) * debian/patches/32_plustek_update.dpatch: + Supersedes 32_add_lide25.dpatch; plustek backend update, adds LiDE 25 support and fixes LiDE 20 support. @@ -1303,7 +1256,7 @@ [ Julien BLACHE ] * New upstream release. + New backends: sm3840, genesys. - + Fixed typos in manpages (Closes: #310332, #310333). + + Fixed typos in manpages. (Closes: #310332, #310333) * Patches removed (integrated upstream): + 01_hotplug_usbids.dpatch + 02_tools_hotplug-ng.dpatch @@ -1318,7 +1271,7 @@ + 37_epson_usbids.dpatch * debian/libsane.postinst: + Removed the udev check, it's broken and MAKEDEV now does the Right - Thing (tm) on its own (Closes: #310216). + Thing (tm) on its own. (Closes: #310216) + Remove anything debconf-related. * debian/control: + Bumped Standards-Version to 3.6.2 (no changes). @@ -1327,7 +1280,7 @@ has been released. + Drop dependency on debconf. * debian/rules: - + Generate sane-backends.pot, patch from Martin Pitt (Closes: #313527). + + Generate sane-backends.pot, patch from Martin Pitt. (Closes: #313527) + Comment call to dh_installdebconf, we don't use debconf anymore. [ Aurélien JARNO ] @@ -1339,14 +1292,14 @@ sane-backends (1.0.15-10) unstable; urgency=low * debian/patches/01_hotplug_usbids.dpatch: - + Updated; added Genius ColorPage Vivid3XE (Closes: #305993). - + Added Microtek ScanMaker 3700 (Closes: #307952). - + Added Epson Stylus RX620 (Closes: #308867). + + Updated; added Genius ColorPage Vivid3XE. (Closes: #305993) + + Added Microtek ScanMaker 3700. (Closes: #307952) + + Added Epson Stylus RX620. (Closes: #308867) * debian/patches/11_hotplug_wait_for_device.dpatch: - + Added; try to wait for the device to appear in the FS (Closes: #302891). + + Added; try to wait for the device to appear in the FS. (Closes: #302891) * debian/patches/30_misc_fixes.dpatch: + Updated; fixed "device model referenced not duplicated" in the v4l - backend (Closes: #306458). + backend. (Closes: #306458) * debian/control.in: + Build-Depend on a fixed libusb. @@ -1358,8 +1311,8 @@ + Process /etc/sane.d/dll.d first, so that those backends will be loaded last. This will prevent buggy extras backends to perturb other backends. * debian/patches/03_manpages_fixes.dpatch: - + Fix a typo in sane(7), reported by A Costa (Closes: #302675). - + Fix 3 typos in scanimage(1), also reported by A Costa (Closes: #302334). + + Fix a typo in sane(7), reported by A Costa. (Closes: #302675) + + Fix 3 typos in scanimage(1), also reported by A Costa. (Closes: #302334) -- Julien BLACHE Wed, 20 Apr 2005 16:17:20 +0200 @@ -1377,7 +1330,7 @@ 1.0.15.7 is the version compatible with the new hotplug script. [ Julien Blache ] - * Added support for GNU/kFreeBSD (Closes: #297979). + * Added support for GNU/kFreeBSD. (Closes: #297979) + debian/rules: generate control at clean time. + debian/rules: install README.{linux,freebsd} depending on the system. + debian/patches/23_unneeded_doc.dpatch: do not install OS-specific READMEs. @@ -1407,7 +1360,7 @@ [ Aurélien Jarno ] * debian/patches/01_hotplug_usbids.dpatch - + Added Epson Corp. Stylus CX6600 to libsane.usermap (Closes: #293082). + + Added Epson Corp. Stylus CX6600 to libsane.usermap. (Closes: #293082) -- Julien BLACHE Mon, 21 Feb 2005 16:43:41 +0100 @@ -1437,7 +1390,7 @@ quality calibration for the Epson Perfection 2480. * debian/patches/22_dll.conf_debian.dpatch + Updated; added the sm3840 backend provided by libsane-extras and the - hpaio backend provided by hplip (Closes: #291435). + hpaio backend provided by hplip. (Closes: #291435) * debian/patches/38_artec_e+48_conf.dpatch + Added; adds proper configuration for the Umax AstraSlim SE. @@ -1447,32 +1400,32 @@ * debian/patches/34_plustek_update.dpatch: + Added; pulled from CVS, contains fixes for Epson Perfection 1260 - scanners (Closes: #290029). + scanners. (Closes: #290029) * debian/patches/35_libusbscanner_2.6_fixes.dpatch: + Added; applied patch from Martin Pitt to use sysfs to determine the - device number, instead of guessing it in a semi-broken way - (Closes: #289666). + device number, instead of guessing it in a semi-broken way. + (Closes: #289666) * debian/patches/36_sane-find-scanner_message.dpatch + Added; adds a "make sure your scanner is powered up and plugged in" - message to sane-find-scanner (Closes: #287592). + message to sane-find-scanner. (Closes: #287592) -- Julien BLACHE Wed, 12 Jan 2005 17:48:30 +0100 sane-backends (1.0.15-4) unstable; urgency=medium * debian/control: - + Added build-dependency on pkg-config (Closes: #286140). + + Added build-dependency on pkg-config. (Closes: #286140) * debian/patches/13_new_configure.dpatch: - + Fixed; remove unwanted autom4te.cache directory from the patch - (Closes: #286143). + + Fixed; remove unwanted autom4te.cache directory from the patch. + (Closes: #286143) -- Julien BLACHE Sun, 19 Dec 2004 18:08:23 +0100 sane-backends (1.0.15-3) unstable; urgency=low * debian/patches/31_gt68xx_fixes.dpatch: - + Updated; added a fix for Mustek BearPaw 2448 TA/CS Plus scanners - (Closes: #284674). + + Updated; added a fix for Mustek BearPaw 2448 TA/CS Plus scanners. + (Closes: #284674) * debian/patches/33_avision_update.dpatch: + Added; improved avision backend from CVS. @@ -1481,11 +1434,11 @@ sane-backends (1.0.15-2) unstable; urgency=low * debian/patches/01_hotplug_usbids.dpatch: - + Added; taken from CVS, adds missing USB IDs to the hotplug scripts - (Closes: #280821, #281003). + + Added; taken from CVS, adds missing USB IDs to the hotplug scripts. + (Closes: #280821, #281003) * debian/patches/31_gt68xx_fixes.dpatch: - + Added; taken from CVS, fixes incorrect mode check for some scanners - (Closes: #281061). + + Added; taken from CVS, fixes incorrect mode check for some scanners. + (Closes: #281061) * debian/patches/30_misc_fixes.dpatch: + Added; miscellaneous fixes from CVS/sane-devel. * debian/patches/32_snapscan_deinterlacer.dpatch: @@ -1497,8 +1450,8 @@ sane-backends (1.0.15-1) unstable; urgency=low * New upstream release. - + Patch for Microtek Phantom C6 on PowerPC merged upstream - (Closes: #274523). + + Patch for Microtek Phantom C6 on PowerPC merged upstream. + (Closes: #274523) + New backend: niash. * debian/control: + Update conflicts/replaces on libsane-extras 1.0.15.1. @@ -1512,7 +1465,7 @@ + Removed. * debian/patches/12_gphoto2_link_backend_only.dpatch: + Updated; revert unwanted backend/Makefile.in patch causing an incorrect - rpath in /usr/lib/libsane.la (Closes: #279082). + rpath in /usr/lib/libsane.la. (Closes: #279082) * debian/patches/13_new_configure.dpatch: + Updated. * debian/patches/22_dll.conf_debian.dpatch: @@ -1525,7 +1478,7 @@ + Removed; taken from CVS, included in this version. * debian/sane-utils.README.Debian: + Fix reference to /usr/share/doc/libsane/README.Debian.gz - (Closes: #278670). + (Closes: #278670) -- Julien BLACHE Tue, 9 Nov 2004 23:28:23 +0100 @@ -1534,9 +1487,9 @@ * Co-maintainer upload. * debian/patches/27_snapscan-usb_count_urb.dpatch: + Added, backported from CVS: Don't enforce even number of URB packages - on snapscan 1212u_2 (Closes: #250885). + on snapscan 1212u_2. (Closes: #250885) * debian/patches/03_hotplug_usbids.dpatch: - + Added Epson Corp. Stylus CX6400 to libsane.usermap (Closes: #293946). + + Added Epson Corp. Stylus CX6400 to libsane.usermap. (Closes: #293946) -- Aurelien Jarno Mon, 9 Aug 2004 11:17:13 +0200 @@ -1544,17 +1497,17 @@ * Urgency=medium as this revision will fix the upgrade path from Woody. * debian/control: - + Removed obsolete gcc-3.3 build-depends (Closes: #262245). + + Removed obsolete gcc-3.3 build-depends. (Closes: #262245) + Upgraded the sane-utils recommendation to a dependency as an upgrade - path from Woody (Closes: #263408). + path from Woody. (Closes: #263408) * debian/rules: + Create /etc/hotplug/blacklist.d/libsane to prevent hotplug - from loading the no-longer-needed hpusbscsi module (Closes: #260734). + from loading the no-longer-needed hpusbscsi module. (Closes: #260734) * debian/patches/03_hotplug_usbids.dpatch: - + Added; adds HP ScanJet 5300C to libsane.usermap (Closes: #260736). + + Added; adds HP ScanJet 5300C to libsane.usermap. (Closes: #260736) * debian/patches/26_scanimage_batch.dpatch: + Added; adds possibility to interrupt a batch scan in scanimage by - pressing ^D (Closes: #260230). + pressing ^D. (Closes: #260230) -- Julien BLACHE Wed, 4 Aug 2004 22:12:40 +0200 @@ -1570,7 +1523,7 @@ * debian/libsane.postinst + modutils is Required, not Essential; replace kernelversion (provided by - modutils) by uname -r | cut (Closes: #254140). + modutils) by uname -r | cut. (Closes: #254140) -- Julien BLACHE Sun, 13 Jun 2004 12:12:02 +0200 @@ -1580,7 +1533,7 @@ + Do not create /dev/usb/scanner* if running a 2.6 kernel. * debian/patches/02_espon_usbids.dpatch + Remove USB IDs for Perfection 1250 and 1260; these scanners are handled - by the plustek backend (pulled from CVS) (Closes: #248859). + by the plustek backend (pulled from CVS). (Closes: #248859) * debian/patches/25_saned_man_section.dpatch + Added; saned goes to /usr/sbin, its manpage should go to section 8. @@ -1589,18 +1542,18 @@ sane-backends (1.0.14-2) unstable; urgency=low * debian/patches/22_dll.conf_debian.dpatch - + Enable the hpoj backend by default (Closes: #246985, #248379). + + Enable the hpoj backend by default. (Closes: #246985, #248379) * debian/patches/01_libusbscanner.dpatch + Pulled from CVS, fixes hotplug's lack of backward compatibility - (Closes: #248770). + (Closes: #248770) -- Julien BLACHE Thu, 20 May 2004 20:25:18 +0200 sane-backends (1.0.14-1) unstable; urgency=low * New upstream release. - + USB IDs for EPSON Stylus CX5400 added (Closes: #243295). - + USB IDs for Nikon CoolScan 5000 added (Closes: #243792). + + USB IDs for EPSON Stylus CX5400 added. (Closes: #243295) + + USB IDs for Nikon CoolScan 5000 added. (Closes: #243792) * debian/hotplug/* + removed, integrated upstream (tools/hotplug). * debian/patches/01_mustek_pp_unified.dpatch @@ -1615,8 +1568,8 @@ sane-backends (1.0.13-4) unstable; urgency=low * debian/patches/02_hp_backend_usb_fix.dpatch - + added, pulled from CVS, fixes USB problems on kernel 2.6 (Closes: #242188). - * Updated libsane.usermap from CVS (Closes: #242090). + + added, pulled from CVS, fixes USB problems on kernel 2.6. (Closes: #242188) + * Updated libsane.usermap from CVS. (Closes: #242090) * Updated README.Debian, fixed a couple of typos. -- Julien BLACHE Sun, 11 Apr 2004 10:31:41 +0200 @@ -1629,7 +1582,7 @@ + Fixed the /dev/usb/parport0 typo that should have read /dev/parport0. Thanks to Tore Anderson for catching this one. + Removed anything debconf-related, only purge whatever is left in the - debconf DB (Closes: #224597). + debconf DB. (Closes: #224597) -- Julien BLACHE Sat, 20 Dec 2003 18:44:37 +0100 @@ -1649,16 +1602,16 @@ + 04_hp5400_sanei_config2.dpatch : ditto. + 03_new_configure : updated. + 04_mustek_pp_unified: added; with this patch the mustek_pp backend - supports both CIS and CCD scanners (Closes: #190998). + supports both CIS and CCD scanners. (Closes: #190998) * debconf: + Direct users to README.Debian.gz instead of README.Debian - (Closes: #217347). - + Added Japanese translation (Closes: #214040). - + Added Dutch translation (Closes: #218905). + . (Closes: #217347) + + Added Japanese translation. (Closes: #214040) + + Added Dutch translation. (Closes: #218905) + Added German translation, thanks to Dirk Ritter and debian-l10n-german. * debian/sane-utils.README.Debian: + More details about the saned user and group, and the reason why the saned - user is not part of the scanner group by default (Closes: #220024). + user is not part of the scanner group by default. (Closes: #220024) * debian/devfs/scanner: + Added an example for SCSI devices, thanks to Dirk Ritter. * debian/control: @@ -1674,7 +1627,7 @@ * The "Maintainer's birthday" release. * Simplified the needlessly complex debconf questions. Now use a multiselect - question instead of 3 independent questions. + question instead of 3 independent questions: + debian/libsane.templates: rewritten to use a multiselect type + debian/libsane.config: ditto, try to convert from the older questions, then purge them once done. @@ -1684,7 +1637,7 @@ in debian/libsane.config. * debian/libsane.postinst: use ':' as a separator for chown instead of '.'. * debian/libsane.README.Debian: ditto. - * debian/control: only Suggests: hotplug (Closes: #205291). + * debian/control: only Suggests: hotplug. (Closes: #205291) -- Julien BLACHE Wed, 20 Aug 2003 14:03:14 +0200 @@ -1696,16 +1649,16 @@ + libsane depends on adduser (>= 3.47). + libsane recommends hotplug. * debian/libsane.templates: templates slightly rewritten to accomodate the - various debconf frontends (Closes: #202744). + various debconf frontends. (Closes: #202744) * debconf-related items: + Switched debconf templates to debconf-po, thus build-depends on - debhelper (>= 4.1.16) (Closes: #203669). + debhelper (>= 4.1.16). (Closes: #203669) + Added french debconf translation based on translation from Michel - Grentzinger for sane-backends 1.0.12-5 - (Closes: #203670). + Grentzinger for sane-backends 1.0.12-5. + (Closes: #203670) * debian/libsane.postinst: + Add a scanner system group, and chown root.scanner /dev/usb/scanner* if - we create them (Closes: #201851). + we create them. (Closes: #201851) * debian/libsane.README.Debian: + Added a Setup paragraph, detailing permissions issues and solutions implemented by this package. @@ -1719,7 +1672,7 @@ Installed as /etc/hotplug/usb/libsane.usermap. [ Aurélien JARNO ] - - debian/devfs/scanner: + * debian/devfs/scanner: + Added, installed as /etc/devfs/conf.d/scanner. -- Julien BLACHE Wed, 6 Aug 2003 13:08:11 +0200 @@ -1757,7 +1710,7 @@ sane-backends (1.0.12-3) unstable; urgency=low * Fix the net backend so that it _does_ try all alternatives before giving - up connecting to the server (Closes: #195396). + up connecting to the server. (Closes: #195396) -- Julien BLACHE Fri, 30 May 2003 19:22:54 +0200 @@ -1770,11 +1723,11 @@ sane-backends (1.0.12-1) unstable; urgency=low * New upstream release. - - should now work on m68k. Yeah. (Closes: #77356) - - sane(7) has been improved (Closes: #188647) - - scanimage(1) has been fixed, wrt --batch. - - the hp5400 backend has been included, replaces libsane-extras (<< 1.0.12.1). - - IPv6 support. + + Should now work on m68k. Yeah. (Closes: #77356) + + sane(7) has been improved. (Closes: #188647) + + scanimage(1) has been fixed, wrt --batch. + + The hp5400 backend has been included, replaces libsane-extras (<< 1.0.12.1). + + IPv6 support. * Standards-Version bumped to 3.5.10 (no changes). * libsane-dev belongs to libdevel. * Do not generate manpages and documentation we do not need. @@ -1800,8 +1753,8 @@ sane-backends (1.0.11-2) unstable; urgency=low * Do not tell how to configure libusb. (Closes: #180570) - * Do not print "Adding saned..." in sane-utils postinst when the user already - exists. + * Do not print "Adding saned..." in sane-utils postinst + when the user already exists. * Pulled fixed gphoto2 backend from CVS. (Closes: #180514) -- Julien BLACHE Thu, 13 Feb 2003 13:22:21 +0100 @@ -1809,11 +1762,11 @@ sane-backends (1.0.11-1) unstable; urgency=low * New upstream release. - - security fixes to saned. (Closes: #180203) + + security fixes to saned. (Closes: #180203) * Added some debconf dialogs: - - /dev/parport* - - /dev/sg* - - note about /proc/bus/usb + + /dev/parport* + + /dev/sg* + + note about /proc/bus/usb -- Julien BLACHE Sun, 9 Feb 2003 21:17:16 +0100 @@ -1826,13 +1779,13 @@ sane-backends (1.0.10-1) unstable; urgency=low * New upstream release. - - fixed sane-scsi manpage. (Closes: #174136). - - mustek_pp now has CIS support. (Closes: #152321) + + fixed sane-scsi manpage. (Closes: #174136) + + mustek_pp now has CIS support. (Closes: #152321) * Added http://www.mostang.com/sane/sane-mfgs.html as /usr/share/doc/libsane/supported.html. (Closes: #174131) * New backends, previously included in libsane-extras : - - gt68xx - - artec_eplus48u (known as tevion9693usb) + + gt68xx + + artec_eplus48u (known as tevion9693usb) * datadir is ${prefix}/share, not ${prefix}/share/sane. * Remove /usr/lib/sane/libsane.so.1, as it's not libsane.so.1 (looks like a libtool side-effect). @@ -1871,10 +1824,10 @@ sane-backends (1.0.9-1) unstable; urgency=low * New upstream release. - - Video for Linux (v4l) backend cleanup. (Closes: #159634) - - updated Avision backend. (Closes: #146054) - - updated Epson backend. (Closes: #114017) - - fixed char signedness in backend/plustek-usbshading.c. (Closes: #164464) + + Video for Linux (v4l) backend cleanup. (Closes: #159634) + + Updated Avision backend. (Closes: #146054) + + Updated Epson backend. (Closes: #114017) + + Fixed char signedness in backend/plustek-usbshading.c. (Closes: #164464) * Fixed debian/copyright. (Closes: #146057) * Enabled translations. * Do not install the upstream changelog twice. @@ -1892,16 +1845,16 @@ sane-backends (1.0.8-3) unstable; urgency=low * New maintainers. - * New upstream release (Closes: #162532, #149317). - - saned manpage mentions /usr/sbin/saned. (Closes: #141464) - - Symlinks for manpages are properly created. (Closes: #99551) - - fixed hostnames handling in saned.conf. (Closes: #51171) - - HP backend update. (Closes: #116962) - - Backend loader respects LD_LIBRARY_PATH. (Closes: #143771) - - path for Epson USB scanner corrected in conf file. (Closes: #154296, #154305) - - A test backend is included, safer than the pnm backend. (Closes: #139256) - - Umax backend fixed. (Closes: #158676) - - HP backend fixed, no longer segfaults. (Closes: 154827) + * New upstream release. (Closes: #162532, #149317) + + saned manpage mentions /usr/sbin/saned. (Closes: #141464) + + Symlinks for manpages are properly created. (Closes: #99551) + + Fixed hostnames handling in saned.conf. (Closes: #51171) + + HP backend update. (Closes: #116962) + + Backend loader respects LD_LIBRARY_PATH. (Closes: #143771) + + Path for Epson USB scanner corrected in conf file. (Closes: #154296, #154305) + + A test backend is included, safer than the pnm backend. (Closes: #139256) + + Umax backend fixed. (Closes: #158676) + + HP backend fixed, no longer segfaults. (Closes: 154827) * Repackaged from scratch, using debhelper. * Standards-Version bumped to 3.5.6. * Do not include rpath informations in sane-config. (Closes: #143603) @@ -1912,12 +1865,12 @@ * Fixed README.Debian. (Closes: #146039) * Fixed sane-plustek(5) manpage. (Closes: #159435) * New package sane-utils, contains sane-find-scanner, scanimage and saned. - - sane-utils creates user and group saned. (Closes: #141465) + + sane-utils creates user and group saned. (Closes: #141465) * New package libsane-extras, containing some extra backends - - hp4200 (v0.2p1) - - gt68xx (v1.0-23) - - niash (v20020217) (Closes: #160327) - - tevion9693 (v0.0.9) + + hp4200 (v0.2p1) + + gt68xx (v1.0-23) + + niash (v20020217) (Closes: #160327) + + tevion9693 (v0.0.9) * Disabled translations until 1.0.9. -- Julien BLACHE Sat, 12 Oct 2002 10:28:09 +0200 @@ -1931,8 +1884,8 @@ sane-backends (1.0.8-1) unstable; urgency=low * New upstream release. - - many new backends - - many more updated backends + + Many new backends + + Many more updated backends -- Kevin Dalley Sun, 6 Oct 2002 18:09:28 -0700 @@ -1946,19 +1899,19 @@ sane-backends (1.0.7-3.1) unstable; urgency=medium - * Non-Maintainer Upload. + * Non-Maintainer upload. * Fixes compilation on Alpha, using the frontend/scanimage.c file from the current CVS. (Closes: #138108) - * Applied patch submitted to #139509, regarding config.{sub,guess} issues + * Apply patch submitted for #139509, regarding config.{sub,guess} issues on MIPS. (Closes: #139509) - * Fixed lintian complaint wrt misplaced Conflicts: field in control file. - * Fixed lintian complaint about .comment section in /usr/lib/sane/*.so.*. + * Fix lintian complaint wrt misplaced Conflicts: field in control file. + * Fix lintian complaint about .comment section in /usr/lib/sane/*.so.*. -- Julien BLACHE Sun, 31 Mar 2002 20:24:48 +0200 sane-backends (1.0.7-3) unstable; urgency=low - * Link with libusb-0.1-4. (Closes: #119393) + * Link against libusb-0.1-4. (Closes: #119393) -- Kevin Dalley Fri, 15 Mar 2002 18:31:08 +0000 @@ -1967,7 +1920,7 @@ * Don't link against libusb due to inconsistencies with versions of libusb libraries. When libusb installation is cleaned up, then usb support will be added again. Unfortunately, this re-opens #119393, though - with a lower severity. (Closes: #138349). + with a lower severity. (Closes: #138349) -- Kevin Dalley Thu, 14 Mar 2002 22:25:53 +0000 @@ -1982,8 +1935,8 @@ sane-backends (1.0.6-1) unstable; urgency=low - * new upstream release of sane. - * new backends: gphoto2. + * New upstream release. + + New backend: gphoto2. -- Kevin Dalley Sun, 27 Jan 2002 23:30:19 -0800 @@ -2004,22 +1957,22 @@ * New backends: bh (Bell+Howell Copiscan II series), dc240 (Kodak DC240 Digital Camera), sm3600 (Microtek ScanMaker 3600), umax_pp (Umax paralell port scanners). - * Fixed security bug in saned.c that allowed access to scanner without + * Fix security bug in saned.c that allowed access to scanner without password. -- Kevin Dalley Sat, 28 Jul 2001 12:38:46 -0700 sane-backends (1.0.4-2) unstable; urgency=low - * increased timeout in sanei_scsi.c, which removes problem with 2.4 - kernel (Closes: #84407). + * Increase timeout in sanei_scsi.c, which removes problem with 2.4 + kernels. (Closes: #84407) -- Kevin Dalley Thu, 31 May 2001 04:36:29 -0700 sane-backends (1.0.4-1) unstable; urgency=low * New upstream release. - * Add backend as63driver. (Closes: #69625). + * Add backend as63driver. (Closes: #69625) -- Kevin Dalley Sun, 28 Jan 2001 09:17:24 -0800 @@ -2052,9 +2005,13 @@ sane (1.0.3-1) unstable; urgency=low * New upstream release. - * New backends: mustek_pp, plustek, st400, v41. - * Many updated backends. - * 16 bit support for scanimage. + + New backends: + - mustek_pp + - plustek + - st400 + - v41 + + Many updated backends. + + 16 bit support for scanimage. -- Kevin Dalley Sat, 2 Sep 2000 11:32:08 -0700 @@ -2079,14 +2036,14 @@ sane-gimp1.1 (1.0.1-1999-10-21-11) unstable; urgency=low * Add Build-Depends to control files for sane and sane-gimp1.1. - (Closes: #60923). + (Closes: #60923) -- Kevin Dalley Mon, 27 Mar 2000 03:16:55 -0800 sane (1.0.1-1999-10-21-10) unstable; urgency=low * Improve description in control file. (Closes: #57032) - * link sane-gimp1.1 with libgimp1.1.17, which is the most recent + * Link sane-gimp1.1 with libgimp1.1.17, which is the most recent libgimp1.1 in frozen unstable. -- Kevin Dalley Mon, 28 Feb 2000 02:37:20 +0000 @@ -2127,7 +2084,7 @@ sane (1.0.1-1999-10-21-5) unstable; urgency=low - * Add link for /usr/lib/libsane-dll.so, again. + * Add symbolic link to /usr/lib/libsane-dll.so, again. -- Kevin Dalley Fri, 19 Nov 1999 00:03:40 -0400 @@ -2142,20 +2099,20 @@ sane (1.0.1-1999-10-21-3) unstable; urgency=low - * added link for /usr/lib/libsane-dll.so + * Add symbolic link for /usr/lib/libsane-dll.so. -- Kevin Dalley Mon, 25 Oct 1999 01:24:30 -0700 sane (1.0.1-1999-10-21-2) unstable; urgency=low - * corrected link of libsane.so.1 + * Fix symbolic link for libsane.so.1. -- Kevin Dalley Sun, 24 Oct 1999 14:43:14 -0700 sane (1.0.1-1999-10-21-1) unstable; urgency=low - * CVS server version from 1999-10-21 - * Many bugs fixed in various backends + * New CVS snapshot. + + Fixes many bugs in various backends. -- Kevin Dalley Fri, 22 Oct 1999 22:06:52 -0700 @@ -2168,7 +2125,7 @@ sane (1.0.1-5) unstable; urgency=low * Relink sane-gimp1.1 with libgimp1.1.9 - * Separate sane-gimp1.1 from sane + * Separate sane-gimp1.1 from sane. -- Kevin Dalley Sun, 10 Oct 1999 03:42:37 -0700 @@ -2199,8 +2156,8 @@ * New backend for Sharp scanners * Update backends for Kodak DC25, HP, Microtek, Micro, Mustek, Nikon Coolscan, snapscan, UMAX. - * Fixes a problem with HP scanners (Closes: #32516) - * Includes backend for dc210 (Closes: #31377) + * Fixes a problem with HP scanners. (Closes: #32516) + * Includes backend for dc210. (Closes: #31377) -- Kevin Dalley Tue, 27 Apr 1999 01:24:33 -0700 @@ -2224,7 +2181,7 @@ interaction with Umax scanner. When using an Artec scanner, uncomment "artec" in dll.conf. * Automatically generates conffiles. (Closes: #26545) - Thanks to Roman Hodek. + Thanks to Roman Hodek . * Fix a problem with creation of /usr/share/sane during the build process. (Closes: #26314) @@ -2236,14 +2193,14 @@ -- Kevin Dalley Sat, 22 Aug 1998 23:06:26 -0700 -sane (0.72-1) frozen unstable; urgency=low +sane (0.72-1) unstable; urgency=low * New upstream release. * First official release to support libgtk1-0.99.9. -- Kevin Dalley Fri, 10 Apr 1998 02:29:52 -0700 -sane (0.71-2) frozen unstable; urgency=low +sane (0.71-2) unstable; urgency=low * Fixed spelling in control files. (Closes: # 19003) * Modified to match latest change in libgtk-0.99.5 @@ -2255,10 +2212,10 @@ sane (0.71-1) unstable; urgency=low * New upstream release. - - New backends: - + Polaroid Digital Microscope Cameras (DMC) - + Apple scanners - + Nikon CoolScan + + New backends: + - Polaroid Digital Microscope Cameras (DMC) + - Apple scanners + - Nikon CoolScan * Remove execute permission in doc directory. (Closes: #17949) * Modify manual page referring to symbolic link of xscanimage. (Closes: #18071) @@ -2268,7 +2225,7 @@ sane (0.70-1) unstable; urgency=low * New upstream release: - - New and updated backends: + + New and updated backends: - AGFA SnapScan - UMAX scanners * Add patches 2-5 to SnapScan backend which allows other scanners